iobroker.openknx 1.1.7 → 1.1.8

package/README.md

@@ -52,6 +52,10 @@ ioBroker adapter for KNX IP communication, powered by [KNXUltimate](https://gith
   Placeholder for the next version (at the beginning of the line):
     ### **WORK IN PROGRESS**
 -->
+### 1.1.8 (2026-04-30)
+- add compatiblity mode für raw DPT5.*
+- reduce default delay to 25ms
+
 ### 1.1.7 (2026-04-29)
 - improve Umlaute handling for DPT-16
 
@@ -79,12 +83,6 @@ ioBroker adapter for KNX IP communication, powered by [KNXUltimate](https://gith
 - (mcm1957) Adapter requires node.js >= 18 and js-controller >= 5 now
 - (mcm1957) Dependencies have been updated
 
-### 0.8.0 (2024-03-30)
-
--   feature: put KNX interface name into log
--   bugfix: #419 wait for connection complete before data processing in case of receiving data before
--   bugfix: #457 Ack missing after changing IOB object value
-
 ### initial version
 
 -   initial version from https://www.npmjs.com/package/iobroker.knx/v/0.8.3

package/admin/i18n/de/translations.json

@@ -99,5 +99,6 @@
     "remove existing IOB objects that are not in ETS import file": "Vorhandene IOB-Objekte entfernen, die nicht in der ETS-Importdatei enthalten sind",
     "set acknowledgement flag when application writes to object": "Bestätigungsflag setzen, wenn Anwendung auf Objekt schreibt",
     "this is not a number": "dies ist keine Zahl",
-    "use common.type boolean for 1 bit enum instead of number": "common.type boolean für 1-Bit-Enum anstelle von Zahl verwenden"
+    "use common.type boolean for 1 bit enum instead of number": "common.type boolean für 1-Bit-Enum anstelle von Zahl verwenden",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "Basis-DPTs als Rohwerte behandeln, z.B. DPT5 = 0-255 (openknx 0.9.1 Kompatibilität)"
 }

package/admin/i18n/en/translations.json

@@ -99,5 +99,6 @@
     "Unsupported file format": "Unsupported file format",
     "use common.type boolean for 1 bit enum instead of number": "use common.type boolean for 1 bit enum instead of number",
     "Value": "Value",
-    "Write": "Write"
+    "Write": "Write",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)"
 }

package/admin/i18n/es/translations.json

@@ -99,5 +99,6 @@
     "remove existing IOB objects that are not in ETS import file": "eliminar objetos IOB existentes que no están en el archivo de importación ETS",
     "set acknowledgement flag when application writes to object": "establecer el indicador de reconocimiento cuando la aplicación escribe en el objeto",
     "this is not a number": "esto no es un numero",
-    "use common.type boolean for 1 bit enum instead of number": "use common.type booleano para enumeración de 1 bit en lugar de número"
+    "use common.type boolean for 1 bit enum instead of number": "use common.type booleano para enumeración de 1 bit en lugar de número",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "tratar DPTs base como valores sin procesar, ej. DPT5 = 0-255 (compatibilidad openknx 0.9.1)"
 }

package/admin/i18n/fr/translations.json

@@ -99,5 +99,6 @@
     "remove existing IOB objects that are not in ETS import file": "supprimer les objets IOB existants qui ne figurent pas dans le fichier d'importation ETS",
     "set acknowledgement flag when application writes to object": "définir l'indicateur d'accusé de réception lorsque l'application écrit dans l'objet",
     "this is not a number": "ce n'est pas un nombre",
-    "use common.type boolean for 1 bit enum instead of number": "utilisez common.type boolean pour une énumération de 1 bit au lieu d'un nombre"
+    "use common.type boolean for 1 bit enum instead of number": "utilisez common.type boolean pour une énumération de 1 bit au lieu d'un nombre",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "traiter les DPTs de base comme valeurs brutes, ex. DPT5 = 0-255 (compatibilité openknx 0.9.1)"
 }

package/admin/i18n/it/translations.json

@@ -99,5 +99,6 @@
     "remove existing IOB objects that are not in ETS import file": "rimuovere gli oggetti IOB esistenti che non si trovano nel file di importazione ETS",
     "set acknowledgement flag when application writes to object": "imposta il flag di riconoscimento quando l'applicazione scrive nell'oggetto",
     "this is not a number": "questo non è un numero",
-    "use common.type boolean for 1 bit enum instead of number": "utilizzare common.type booleano per l'enumerazione a 1 bit anziché il numero"
+    "use common.type boolean for 1 bit enum instead of number": "utilizzare common.type booleano per l'enumerazione a 1 bit anziché il numero",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "trattare i DPT base come valori grezzi, es. DPT5 = 0-255 (compatibilità openknx 0.9.1)"
 }

package/admin/i18n/nl/translations.json

@@ -99,5 +99,6 @@
     "remove existing IOB objects that are not in ETS import file": "verwijder bestaande IOB-objecten die niet in het ETS-importbestand staan",
     "set acknowledgement flag when application writes to object": "bevestigingsvlag instellen wanneer toepassing naar object schrijft",
     "this is not a number": "dit is geen nummer",
-    "use common.type boolean for 1 bit enum instead of number": "gebruik common.type boolean voor 1 bit enum in plaats van getal"
+    "use common.type boolean for 1 bit enum instead of number": "gebruik common.type boolean voor 1 bit enum in plaats van getal",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "basis-DPTs als onbewerkte waarden behandelen, bijv. DPT5 = 0-255 (openknx 0.9.1 compatibiliteit)"
 }

package/admin/i18n/pl/translations.json

@@ -99,5 +99,6 @@
     "remove existing IOB objects that are not in ETS import file": "usuń istniejące obiekty IOB, których nie ma w pliku importu ETS",
     "set acknowledgement flag when application writes to object": "ustaw flagę potwierdzenia, gdy aplikacja zapisuje do obiektu",
     "this is not a number": "to nie jest liczba",
-    "use common.type boolean for 1 bit enum instead of number": "użyj wartości logicznej common.type dla 1-bitowego wyliczenia zamiast liczby"
+    "use common.type boolean for 1 bit enum instead of number": "użyj wartości logicznej common.type dla 1-bitowego wyliczenia zamiast liczby",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "traktuj bazowe DPT jako wartości surowe, np. DPT5 = 0-255 (kompatybilność openknx 0.9.1)"
 }

package/admin/i18n/pt/translations.json

@@ -99,5 +99,6 @@
     "remove existing IOB objects that are not in ETS import file": "remova objetos IOB existentes que não estão no arquivo de importação ETS",
     "set acknowledgement flag when application writes to object": "definir sinalizador de reconhecimento quando o aplicativo grava no objeto",
     "this is not a number": "este não é um número",
-    "use common.type boolean for 1 bit enum instead of number": "use common.type booleano para enum de 1 bit em vez de número"
+    "use common.type boolean for 1 bit enum instead of number": "use common.type booleano para enum de 1 bit em vez de número",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "tratar DPTs base como valores brutos, ex. DPT5 = 0-255 (compatibilidade openknx 0.9.1)"
 }

package/admin/i18n/ru/translations.json

@@ -99,5 +99,6 @@
     "remove existing IOB objects that are not in ETS import file": "удалить существующие объекты IOB, которых нет в файле импорта ETS",
     "set acknowledgement flag when application writes to object": "установить флаг подтверждения, когда приложение записывает в объект",
     "this is not a number": "это не число",
-    "use common.type boolean for 1 bit enum instead of number": "используйте логическое значение common.type для 1-битного перечисления вместо числа"
+    "use common.type boolean for 1 bit enum instead of number": "используйте логическое значение common.type для 1-битного перечисления вместо числа",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "обрабатывать базовые DPT как необработанные значения, напр. DPT5 = 0-255 (совместимость с openknx 0.9.1)"
 }

package/admin/i18n/uk/translations.json

@@ -99,5 +99,6 @@
     "remove existing IOB objects that are not in ETS import file": "видалити існуючі об’єкти IOB, яких немає у файлі імпорту ETS",
     "set acknowledgement flag when application writes to object": "встановити позначку підтвердження, коли програма записує об’єкт",
     "this is not a number": "це не число",
-    "use common.type boolean for 1 bit enum instead of number": "використовуйте common.type boolean для 1-бітового enum замість числа"
+    "use common.type boolean for 1 bit enum instead of number": "використовуйте common.type boolean для 1-бітового enum замість числа",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "обробляти базові DPT як необроблені значення, напр. DPT5 = 0-255 (сумісність openknx 0.9.1)"
 }

package/admin/i18n/zh-cn/translations.json

@@ -99,5 +99,6 @@
     "remove existing IOB objects that are not in ETS import file": "删除 ETS 导入文件中不存在的现有 IOB 对象",
     "set acknowledgement flag when application writes to object": "当应用程序写入对象时设置确认标志",
     "this is not a number": "这不是一个数字",
-    "use common.type boolean for 1 bit enum instead of number": "使用 common.type boolean 作为 1 位枚举而不是数字"
+    "use common.type boolean for 1 bit enum instead of number": "使用 common.type boolean 作为 1 位枚举而不是数字",
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": "将基本DPT视为原始值，如DPT5 = 0-255（openknx 0.9.1兼容）"
 }

package/admin/index_m.html

@@ -99,13 +99,14 @@
                     });
                 }, 1000);
                 if (settings.autoreadEnabled === undefined) settings.autoreadEnabled = false;
+                if (settings.rawBaseDpt === undefined) settings.rawBaseDpt = true;
                 if (settings.deviceName === undefined) settings.deviceName = "";
                 if (settings.eibadr === undefined) settings.eibadr = "0.0.0";
                 if (settings.gwip === undefined) settings.gwip = "127.0.0.1";
                 if (settings.gwipport === undefined) settings.gwipport = 3671;
                 if (settings.localInterface === undefined) settings.localInterface = "";
                 if (settings.hostProtocol === undefined) settings.hostProtocol = "TunnelUDP";
-                if (settings.minimumDelay === undefined) settings.minimumDelay = 80;
+                if (settings.sendInterval === undefined) settings.sendInterval = 25;
                 if (settings.onlyAddNewObjects === undefined) settings.onlyAddNewObjects = false;
                 if (settings.removeUnusedObjects === undefined) settings.removeUnusedObjects = false;
                 if (settings.setAckOnWrite === undefined) settings.setAckOnWrite = false;
@@ -188,14 +189,14 @@
                             }
                         }
 
-                        if (id === "minimumDelay") {
-                            var intervall = $("#minimumDelay").val();
+                        if (id === "sendInterval") {
+                            var intervall = $("#sendInterval").val();
                             number = Number(intervall);
                             if (isNumber(intervall) && number >= 0 && number <= 1000) {
-                                $("#minimumDelay").val(number);
+                                $("#sendInterval").val(number);
                             } else {
                                 alert("please provide a valid minimum send delay value between 0 and 1000 [ms]");
-                                $("#minimumDelay").val(settings.minimumDelay).change();
+                                $("#sendInterval").val(settings.sendInterval).change();
                             }
                         }
 
@@ -1159,8 +1160,8 @@
                                 <label class="translate" for="hostProtocol">Protocol</label>
                             </div>
                             <div class="col s12 l3 input-field">
-                                <input class="value" id="minimumDelay" type="text" />
-                                <label for="minimumDelay" class="translate"
+                                <input class="value" id="sendInterval" type="text" />
+                                <label for="sendInterval" class="translate"
                                     >Minimum send delay between two frames [ms]</label>
                             </div>
                             <!-- materialize grid small 12 of 12 columns https://materializecss.com/grid.html -->
@@ -1168,12 +1169,17 @@
                                 <input class="value" id="autoreadEnabled" type="checkbox" />
                                 <label class="translate" for="autoreadEnabled"
                                     >readout values of autoread iob objects on startup</label>
-                            </div>  
+                            </div>
                             <div class="col s12 input-field">
                                 <input class="value" id="noWarnUnknownGa" type="checkbox" />
                                 <label class="translate" for="noWarnUnknownGa"
                                     >do not warn on unknown KNX group adresses</label>
                             </div>
+                            <div class="col s12 input-field">
+                                <input class="value" id="rawBaseDpt" type="checkbox" checked />
+                                <label class="translate" for="rawBaseDpt"
+                                    >treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)</label>
+                            </div>
  
                         </div>
                     </div>

package/admin/words.js

@@ -106,7 +106,8 @@ systemDictionary = {
     "physical KNX address": {                         "en": "physical KNX address",                             "de": "physikalische KNX-Adresse",                        "ru": "физический адрес KNX",                             "pt": "endereço KNX físico",                              "nl": "fysiek KNX-adres",                                 "fr": "adresse physique KNX",                             "it": "indirizzo fisico KNX",                             "es": "dirección KNX física",                             "pl": "fizyczny adres KNX",                               "uk": "фізичну адресу KNX",                               "zh-cn": "物理 KNX 地址"},
     "physical KNX address in format a/b/c not valid": {"en": "physical KNX address in format a/b/c not valid",   "de": "Physikalische KNX-Adresse im Format a/b/c ungültig", "ru": "физический адрес KNX в формате a/b/c недействителен", "pt": "endereço KNX físico no formato a/b/c inválido",    "nl": "fysiek KNX-adres in formaat a/b/c niet geldig",    "fr": "adresse physique KNX au format a/b/c non valide",  "it": "indirizzo fisico KNX in formato a/b/c non valido", "es": "Dirección física KNX en formato a/b/c no válida",  "pl": "adres fizyczny KNX w formacie a/b/c jest nieprawidłowy", "uk": "фізична адреса KNX у форматі a/b/c недійсна",      "zh-cn": "a/b/c 格式的物理 KNX 地址无效"},
     "please provide a valid minimum send delay value between 0 and 1000 [ms]": {"en": "please provide a valid minimum send delay value between 0 and 1000 [ms]", "de": "Bitte geben Sie einen gültigen Wert für die Sendeverzögerung zwischen 0 und 1000 [ms] an", "ru": "укажите допустимое минимальное значение задержки отправки от 0 до 1000 [мс]", "pt": "forneça um valor mínimo de atraso de envio válido entre 0 e 1000 [ms]", "nl": "geef een geldige minimale verzendvertragingswaarde op tussen 0 en 1000 [ms]", "fr": "veuillez fournir une valeur de délai d'envoi minimum valide comprise entre 0 et 1 000 [ms]", "it": "fornire un valore di ritardo di invio minimo valido compreso tra 0 e 1000 [ms]", "es": "proporcione un valor de retardo de envío mínimo válido entre 0 y 1000 [ms]", "pl": "proszę podać poprawną minimalną wartość opóźnienia wysyłania pomiędzy 0 a 1000 [ms]", "uk": "надайте дійсне мінімальне значення затримки надсилання від 0 до 1000 [мс]", "zh-cn": "请提供 0 到 1000 [ms] 之间的有效最小发送延迟值"},
-    "readout values of autoread iob objects on startup": {"en": "readout values of autoread iob objects on startup", "de": "Werte von Autoread-IOB-Objekten beim Start des Adapters auslesen", "ru": "считывание значений объектов autoread iob при запуске", "pt": "valores de leitura de objetos iob de leitura automática na inicialização", "nl": "uitleeswaarden van autoread iob-objecten bij het opstarten", "fr": "lire les valeurs des objets iob à lecture automatique au démarrage", "it": "valori di lettura degli oggetti iob con lettura automatica all'avvio", "es": "valores de lectura de objetos iob de lectura automática al inicio", "pl": "odczyt wartości obiektów iob z automatycznym odczytem przy uruchomieniu", "uk": "зчитування значень автозчитування об’єктів iob під час запуску", "zh-cn": "启动时自动读取 iob 对象的读数值"},
+    "readout values of autoread iob objects on startup": {"en": "readout values of autoread iob objects on startup", "de": "Werte von Autoread-IOB-Objekten beim Start des Adapters auslesen", "ru": "считывание значений объектов autoread iob при запуске", "pt": "valores de leitura de objetos iob de leitura automática na inicialização", "nl": "uitleeswaarden van autoread iob-objecten bij het opstarten", "fr": "lire les valeurs des objets iob à lecture automatique au démarrage", "it": "valori di lettura degli oggetti iob con lettura automatica all’avvio", "es": "valores de lectura de objetos iob de lectura automática al inicio", "pl": "odczyt wartości obiektów iob z automatycznym odczytem przy uruchomieniu", "uk": "зчитування значень автозчитування об’єктів iob під час запуску", "zh-cn": "启动时自动读取 iob 对象的读数值"},
+    "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)": {"en": "treat base DPTs as raw values, e.g. DPT5 = 0-255 (openknx 0.9.1 compatibility)", "de": "Basis-DPTs als Rohwerte behandeln, z.B. DPT5 = 0-255 (openknx 0.9.1 Kompatibilität)", "ru": "обрабатывать базовые DPT как необработанные значения, напр. DPT5 = 0-255 (совместимость с openknx 0.9.1)", "pt": "tratar DPTs base como valores brutos, ex. DPT5 = 0-255 (compatibilidade openknx 0.9.1)", "nl": "basis-DPTs als onbewerkte waarden behandelen, bijv. DPT5 = 0-255 (openknx 0.9.1 compatibiliteit)", "fr": "traiter les DPTs de base comme valeurs brutes, ex. DPT5 = 0-255 (compatibilité openknx 0.9.1)", "it": "trattare i DPT base come valori grezzi, es. DPT5 = 0-255 (compatibilità openknx 0.9.1)", "es": "tratar DPTs base como valores sin procesar, ej. DPT5 = 0-255 (compatibilidad openknx 0.9.1)", "pl": "traktuj bazowe DPT jako wartości surowe, np. DPT5 = 0-255 (kompatybilność openknx 0.9.1)", "uk": "обробляти базові DPT як необроблені значення, напр. DPT5 = 0-255 (сумісність openknx 0.9.1)", "zh-cn": "将基本DPT视为原始值，如DPT5 = 0-255（openknx 0.9.1兼容）"},
     "remove existing IOB objects that are not in ETS import file": {"en": "remove existing IOB objects that are not in ETS import file", "de": "Vorhandene IOB-Objekte entfernen, die nicht in der ETS-Importdatei enthalten sind", "ru": "удалить существующие объекты IOB, которых нет в файле импорта ETS", "pt": "remova objetos IOB existentes que não estão no arquivo de importação ETS", "nl": "verwijder bestaande IOB-objecten die niet in het ETS-importbestand staan", "fr": "supprimer les objets IOB existants qui ne figurent pas dans le fichier d'importation ETS", "it": "rimuovere gli oggetti IOB esistenti che non si trovano nel file di importazione ETS", "es": "eliminar objetos IOB existentes que no están en el archivo de importación ETS", "pl": "usuń istniejące obiekty IOB, których nie ma w pliku importu ETS", "uk": "видалити існуючі об’єкти IOB, яких немає у файлі імпорту ETS", "zh-cn": "删除 ETS 导入文件中不存在的现有 IOB 对象"},
     "set acknowledgement flag when application writes to object": {"en": "set acknowledgement flag when application writes to object", "de": "Bestätigungsflag setzen, wenn Anwendung auf Objekt schreibt", "ru": "установить флаг подтверждения, когда приложение записывает в объект", "pt": "definir sinalizador de reconhecimento quando o aplicativo grava no objeto", "nl": "bevestigingsvlag instellen wanneer toepassing naar object schrijft", "fr": "définir l'indicateur d'accusé de réception lorsque l'application écrit dans l'objet", "it": "imposta il flag di riconoscimento quando l'applicazione scrive nell'oggetto", "es": "establecer el indicador de reconocimiento cuando la aplicación escribe en el objeto", "pl": "ustaw flagę potwierdzenia, gdy aplikacja zapisuje do obiektu", "uk": "встановити позначку підтвердження, коли програма записує об’єкт", "zh-cn": "当应用程序写入对象时设置确认标志"},
     "this is not a number": {                         "en": "this is not a number",                             "de": "dies ist keine Zahl",                              "ru": "это не число",                                     "pt": "este não é um número",                             "nl": "dit is geen nummer",                               "fr": "ce n'est pas un nombre",                           "it": "questo non è un numero",                           "es": "esto no es un numero",                             "pl": "to nie jest liczba",                               "uk": "це не число",                                      "zh-cn": "这不是一个数字"},

package/io-package.json

@@ -1,8 +1,21 @@
 {
   "common": {
     "name": "openknx",
-    "version": "1.1.7",
+    "version": "1.1.8",
     "news": {
+      "1.1.8": {
+        "en": "add compatiblity mode für raw DPT5.*\nreduce default delay to 25ms",
+        "de": "Kombatiblitäts-Modus für raw DPT5.*\nDefault-Delay auf 25m reduziert",
+        "ru": "добавить режим совместимости с сырым DPT5.*\nуменьшить задержку до 25 мс",
+        "pt": "adicionar o modo de compatibilidade für cru DPT5.*\nreduzir o atraso padrão para 25ms",
+        "nl": "compatiblity mode für raw DPT5.*\nde standaardvertraging verlagen naar 25ms",
+        "fr": "ajouter le mode de compatibilité für brut DPT5.*\nréduire le délai par défaut à 25ms",
+        "it": "aggiungere la modalità compatiblity für raw DPT5.*\nridurre il ritardo predefinito a 25ms",
+        "es": "añadir compatiblity mode für raw DPT5.*\nreducir el retraso predeterminado a 25 ms",
+        "pl": "dodać tryb kompatybilności für raw DPT5. *\nzmniejszyć domyślne opóźnienie do 25ms",
+        "uk": "додати режим сумісності für raw DPT5.*\nзменшити затримку за замовчуванням до 25ms",
+        "zh-cn": "添加相容性模式 für 原始 DPT5. *\n将默认延迟减少至 25 ms"
+      },
       "1.1.7": {
         "en": "improve Umlaute handling for DPT-16",
         "de": "Verbesserung der Umlaute Handhabung für DPT-16",
@@ -166,6 +179,7 @@
     "aliasRegexp": "stat(e|us)(\\.|$)|rm(\\.|$)|r(ü|ue)ckmeldung(\\.|$)",
     "aliasSimilarity": 0.9,
     "autoreadEnabled": true,
+    "rawBaseDpt": true,
     "deviceName": "",
     "eibadr": "0.0.0",
     "gwip": "",
@@ -178,7 +192,7 @@
     "tunnelUserPassword": "",
     "tunnelUserId": "",
     "localInterface": "",
-    "minimumDelay": 80,
+    "sendInterval": 25,
     "noWarnUnknownGa": false,
     "useBoolean": true,
     "knxCompatMode": false,

package/main.js

@@ -50,6 +50,13 @@ class openknx extends utils.Adapter {
         this.stopping = false;
         this.linkedStateMap = {}; // foreignStateId → knxObjectId (reverse lookup for Direct Link)
 
+        // Base DPTs without subtype that get unwanted scaling in KNXUltimate
+        // Map to their raw/unscaled subtype equivalent (like knx.js 0.9.x did)
+        this.baseDptRawMap = {
+            DPT5: "DPT5.005",
+            DPT6: "DPT6.010",
+        };
+
         // redirect log from KNXUltimate (winston-based logStream) to adapter log
         // Collapse multiline messages (stack traces) into a single line
         this.logHandler = entry => {
@@ -585,6 +592,21 @@ class openknx extends utils.Adapter {
         return duplicates.length ? message : "";
     }
 
+    /**
+     * Returns the effective DPT string. When rawBaseDpt is enabled and a base DPT
+     * without subtype is given (e.g. "DPT5"), maps it to an unscaled subtype
+     * to match knx.js 0.9.x behavior (no percentage scaling).
+     */
+    effectiveDpt(dpt) {
+        if (this.config.rawBaseDpt !== false && dpt && dpt.indexOf(".") === -1) {
+            const mapped = this.baseDptRawMap[dpt.toUpperCase()];
+            if (mapped) {
+                return mapped;
+            }
+        }
+        return dpt;
+    }
+
     // obj to string and date to number for iobroker from knx stack
     convertType(val) {
         let ret;
@@ -684,7 +706,7 @@ class openknx extends utils.Adapter {
                     `Direct Link [${mode}]: ${id} changed to ${JSON.stringify(state.val)}, writing ${JSON.stringify(writeVal)} to GA ${gaData.native.address}`,
                 );
                 try {
-                    this.knxConnection.write(gaData.native.address, writeVal, gaData.native.dpt);
+                    this.knxConnection.write(gaData.native.address, writeVal, this.effectiveDpt(gaData.native.dpt));
                 } catch (e) {
                     this.log.warn(`Direct Link write failed for ${gaData.native.address}: ${e.message}`);
                 }
@@ -718,7 +740,7 @@ class openknx extends utils.Adapter {
             return "not connected to KNX bus";
         }
 
-        const dpt = gaData.native.dpt;
+        const dpt = this.effectiveDpt(gaData.native.dpt);
         const ga = gaData.native.address;
         let knxVal = state.val;
         let rawVal;
@@ -904,7 +926,7 @@ class openknx extends utils.Adapter {
                 if (foreignState?.val != null) {
                     const gaData = this.gaList.getDataById(knxId);
                     if (gaData?.native?.address && gaData?.native?.dpt) {
-                        this.knxConnection.write(gaData.native.address, foreignState.val, gaData.native.dpt);
+                        this.knxConnection.write(gaData.native.address, foreignState.val, this.effectiveDpt(gaData.native.dpt));
                         this.log.debug(`Direct Link sync: ${foreignId}=${foreignState.val} → ${gaData.native.address}`);
                     }
                 }
@@ -972,7 +994,7 @@ class openknx extends utils.Adapter {
             ipPort: this.config.gwipport,
             physAddr: this.config.eibadr || "0.0.0",
             localIPAddress: this.config.localInterface,
-            KNXQueueSendIntervalMilliseconds: this.config.minimumDelay || 25,
+            KNXQueueSendIntervalMilliseconds: this.config.sendInterval || 25,
             // https://github.com/Supergiovane/node-red-contrib-knx-ultimate/issues/78
             suppress_ack_ldatareq: true,
             // Enable KNXUltimate internal logging at debug level to see L_DATA_CON timing
@@ -1034,7 +1056,7 @@ class openknx extends utils.Adapter {
                         const data = this.gaList.getDataById(key);
                         let dptConfig = null;
                         try {
-                            dptConfig = dptlib.resolve(data.native.dpt);
+                            dptConfig = dptlib.resolve(this.effectiveDpt(data.native.dpt));
                         } catch {
                             // Unknown DPT - will use raw mode
                         }
@@ -1051,10 +1073,29 @@ class openknx extends utils.Adapter {
                 this.autoreaddone = true;
                 this.countObjectsNotification(cnt_withDPT);
 
+                // Warn about large DPTs with answer_groupValueResponse enabled
+                const largeDptResponders = [];
+                for (const key of this.gaList) {
+                    const data = this.gaList.getDataById(key);
+                    if (data.native.answer_groupValueResponse && data.native.dpt) {
+                        const dptUpper = data.native.dpt.toUpperCase();
+                        if (dptUpper.startsWith("DPT16") || dptUpper.startsWith("DPT14") || dptUpper.startsWith("DPT13") || dptUpper.startsWith("DPT12")) {
+                            largeDptResponders.push(`${data.native.address} (${data.native.dpt})`);
+                        }
+                    }
+                }
+                if (largeDptResponders.length > 0) {
+                    this.log.info(
+                        `${largeDptResponders.length} large DPT objects (DPT12-16) with answer_groupValueResponse enabled detected. ` +
+                        `These consume significant bus time (~65ms each). Consider disabling answer_groupValueResponse on these GAs ` +
+                        `if a physical device already responds or if the value is sent via GroupValue_Write on change.`,
+                    );
+                }
+
                 // Phase 2: send autoread requests (asynchronous, non-blocking)
                 if (autoreadGAs.length > 0) {
                     // use realistic per-telegram time so queue stays empty between reads
-                    const autoreadInterval = Math.max(this.config.minimumDelay || 25, 200);
+                    const autoreadInterval = Math.max(this.config.sendInterval || 25, 200);
                     const estimatedSec = Math.ceil((autoreadGAs.length * autoreadInterval) / 1000);
                     const estimatedTime =
                         estimatedSec >= 60
@@ -1205,7 +1246,7 @@ class openknx extends utils.Adapter {
                             this.getForeignState(data.native.linkedState, (fErr, fState) => {
                                 if (!fErr && fState && fState.val != null) {
                                     try {
-                                        this.knxConnection.respond(dest, fState.val, data.native.dpt);
+                                        this.knxConnection.respond(dest, fState.val, this.effectiveDpt(data.native.dpt));
                                         this.log.debug(`Direct Link: Read ${dest} → ${fState.val}`);
                                     } catch (e) {
                                         this.log.error(`Direct Link: respond ${dest}: ${e.message || e}`);
@@ -1229,7 +1270,7 @@ class openknx extends utils.Adapter {
                                         this.knxConnection.respond(
                                             dest,
                                             stateval,
-                                            this.gaList.getDataById(id).native.dpt,
+                                            this.effectiveDpt(this.gaList.getDataById(id).native.dpt),
                                         );
                                         this.log.debug(`responding to ${dest} with value ${state.val} (queue: ${this.knxConnection.commandQueue?.length || 0})`);
                                     } catch (e) {
@@ -1425,7 +1466,7 @@ class openknx extends utils.Adapter {
             this.log.info(
                 `Connecting to knx gateway: ${this.config.gwip}:${this.config.gwipport} device name: ${
                     this.config.deviceName
-                } with physical adr: ${this.config.eibadr} minimum send delay: ${this.config.minimumDelay} ms` +
+                } with physical adr: ${this.config.eibadr} minimum send delay: ${this.config.sendInterval} ms` +
                     ` debug level: ${this.log.level}`,
             );
         }

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "iobroker.openknx",
-  "version": "1.1.7",
+  "version": "1.1.8",
   "description": "ioBroker knx Adapter",
   "author": "boellner",
   "contributors": [