iobroker.nuasense 0.1.0 → 0.2.0

package/LICENSE

@@ -1,6 +1,6 @@
 MIT License
 
-Copyright (c) 2026 NuaSense
+Copyright (c) 2026 NuaSense <manuel@nuasense.com>
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

package/README.md

@@ -9,22 +9,22 @@
 
 ## NuaSense adapter for ioBroker
 
-What your weather station means for your crop, as ioBroker states — and, if you like, your station forwarded from ioBroker to NuaSense.
-
-[NuaSense](https://nuasense.com) computes the agronomy on a weather station of any brand: tonight's low and whether it is a frost night, the next calm dry daylight window for spraying, whether the latest reading is plausible against the model, and the hourly values — ET0, leaf wetness, spray quality, VPD, delta T. The first three stations on an account connect free.
+What your weather station means for your house and garden, as ioBroker states — and, if you like, your station forwarded from ioBroker to NuaSense. The first three stations on a NuaSense account connect free.
 
 ### Read
 
-Make an API key in the NuaSense console under **API Keys** (scope `ingest:write`; despite the name it is what reads your own stations) and put it into the adapter. Every 15 minutes (configurable) the adapter writes, per station:
+Make an API key in the NuaSense console under **API Keys** (scope `ingest:write`; it is what reads your own stations), put it into the adapter, and tell it what the garden mostly is (lawn, vegetables, flower beds and shrubs) and your sprinkler's rate in mm per hour (pop-up sprinkler about 10, drip line 2–4; 0 for millimetres only). Every 15 minutes (configurable) the adapter writes, per station:
 
 | state | meaning |
 |---|---|
-| `tonight.low`, `tonight.at`, `tonight.frost`, `tonight.grassLow` | the coming night: low in °C, when, `none` / `watch` / `frost`, grass-level estimate |
-| `spray.window`, `spray.date`, `spray.windMax`, `spray.reason` | the next calm dry window, e.g. `07:00–14:00`, or why there is none |
-| `check.verdict`, `check.reading`, `check.model`, `check.difference` | latest reading against the model for that hour: `plausible`, `check`, `off` |
-| `hourly.et0`, `hourly.leafWetnessHours`, `hourly.sprayQuality`, `hourly.sprayIndex`, `hourly.sprayLimit`, `hourly.vpd`, `hourly.deltaT`, `hourly.temperature`, `hourly.humidity`, `hourly.pressure` | the latest hourly agronomy |
+| `tonight.low`, `tonight.at`, `tonight.frost`, `tonight.grassLow` | the coming night: low in °C, when, `none` / `watch` (grass level may freeze: pots in) / `frost`, grass-level estimate |
+| `garden.wateringMm`, `garden.wateringMinutes` | what the garden needs today — evaporation minus the rain of the last 24 h and the rain forecast for the next 24 h; `0` means skip. Minutes at your sprinkler's rate, ready for a script that opens a valve once a day |
+| `garden.rainNext24h`, `garden.rainLast24h`, `garden.et0`, `garden.et0Source` | the figures behind it; ET0 comes from your own station once it has a day of data, from the forecast before |
+| `plausibility.verdict`, `.reading`, `.model`, `.difference` | your latest reading against the forecast model for that hour: `plausible`, or `implausible` when they differ by more than 5 °C (a wrong unit, a sensor indoors) — no cause is guessed |
 | `lastUpload`, `device` | when the station last sent, and from what |
 
+**Advanced** (a checkbox) adds the agronomy values for farms, vineyards and nurseries: `spray.*` (next calm dry window) and `hourly.*` (ET0 per hour, leaf-wetness hours, spray quality, VPD, delta T, hourly means).
+
 `info.connection` says whether NuaSense answered with this key.
 
 ### Send
@@ -46,6 +46,12 @@ When you connect a station, NuaSense stores its readings and computes your forec
     Placeholder for the next version (at the beginning of the line):
     ### **WORK IN PROGRESS**
 -->
+### 0.2.0 (2026-11-05)
+* (NuaSense) house & garden first: frost tonight, watering today in mm and minutes, rain next 24 h, plausibility; agronomy values behind Advanced
+
+### 0.1.1 (2026-11-03)
+* (NuaSense) checker fixes: Node.js 22, i18n for the admin UI, responsive sizes, trusted-publishing workflow, node:crypto
+
 ### 0.1.0 (2026-11-03)
 * (NuaSense) first release: first look and hourly agronomy as states; optional forwarding of a station from ioBroker to NuaSense
 

package/admin/i18n/de/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "Von NuaSense lesen",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "Ein API-Key von platform.nuasense.com, API Keys, mit dem Scope ingest:write. Leer lassen, wenn nur eine Station weitergeleitet werden soll.",
+  "API key": "API-Key",
+  "Station id (empty = all stations on the account)": "Station-ID (leer = alle Stationen des Kontos)",
+  "Read every (minutes)": "Lesen alle (Minuten)",
+  "API address": "API-Adresse",
+  "Forward a station to NuaSense": "Station an NuaSense weiterleiten",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "In der NuaSense-Konsole: External stations, Add a station, «Home Assistant / weewx / Meteobridge / Node-RED» wählen. Der letzte Schritt zeigt einen Pfad wie /station/kw7n-4hpd-x2vt; der Teil nach /station/ ist der Token. Dann die ioBroker-States wählen, die die Werte der Station halten; fehlende werden einfach nicht gesendet.",
+  "Forward a station": "Station weiterleiten",
+  "Station token": "Station-Token",
+  "Device id (any text; keep it stable)": "Geräte-ID (beliebiger Text; stabil lassen)",
+  "Receiver": "Empfänger",
+  "Temperature (°C)": "Temperatur (°C)",
+  "Humidity (%)": "Luftfeuchte (%)",
+  "Pressure at station level (hPa)": "Luftdruck auf Stationshöhe (hPa)",
+  "Wind speed": "Windgeschwindigkeit",
+  "Wind unit": "Windeinheit",
+  "Wind gusts": "Windböen",
+  "Wind direction (°)": "Windrichtung (°)",
+  "Rain total (mm, a counter that only grows)": "Regen gesamt (mm, ein Zähler, der nur wächst)",
+  "Solar radiation (W/m²)": "Globalstrahlung (W/m²)",
+  "Light (lux), if no W/m²": "Licht (Lux), falls kein W/m²",
+  "m/s": "m/s",
+  "km/h": "km/h",
+  "The garden is mostly": "Der Garten ist vor allem",
+  "Lawn": "Rasen",
+  "Vegetables": "Gemüse",
+  "Flower beds and shrubs": "Beete und Sträucher",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "Regnerleistung (mm pro Stunde; 0 = nur mm)",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "Erweitert: Agronomie-Werte (Spritzfenster, ET0 pro Stunde, Blattnässe, VPD, Delta T)"
+}

package/admin/i18n/en/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "Read from NuaSense",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.",
+  "API key": "API key",
+  "Station id (empty = all stations on the account)": "Station id (empty = all stations on the account)",
+  "Read every (minutes)": "Read every (minutes)",
+  "API address": "API address",
+  "Forward a station to NuaSense": "Forward a station to NuaSense",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.",
+  "Forward a station": "Forward a station",
+  "Station token": "Station token",
+  "Device id (any text; keep it stable)": "Device id (any text; keep it stable)",
+  "Receiver": "Receiver",
+  "Temperature (°C)": "Temperature (°C)",
+  "Humidity (%)": "Humidity (%)",
+  "Pressure at station level (hPa)": "Pressure at station level (hPa)",
+  "Wind speed": "Wind speed",
+  "Wind unit": "Wind unit",
+  "Wind gusts": "Wind gusts",
+  "Wind direction (°)": "Wind direction (°)",
+  "Rain total (mm, a counter that only grows)": "Rain total (mm, a counter that only grows)",
+  "Solar radiation (W/m²)": "Solar radiation (W/m²)",
+  "Light (lux), if no W/m²": "Light (lux), if no W/m²",
+  "m/s": "m/s",
+  "km/h": "km/h",
+  "The garden is mostly": "The garden is mostly",
+  "Lawn": "Lawn",
+  "Vegetables": "Vegetables",
+  "Flower beds and shrubs": "Flower beds and shrubs",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "Sprinkler rate (mm per hour; 0 = only mm)",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)"
+}

package/admin/i18n/es/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "Leer de NuaSense",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "Una clave API de platform.nuasense.com, API Keys, con el alcance ingest:write. Déjelo vacío si solo quiere reenviar una estación.",
+  "API key": "Clave API",
+  "Station id (empty = all stations on the account)": "ID de estación (vacío = todas las estaciones de la cuenta)",
+  "Read every (minutes)": "Leer cada (minutos)",
+  "API address": "Dirección de la API",
+  "Forward a station to NuaSense": "Reenviar una estación a NuaSense",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "En la consola NuaSense: External stations, Add a station, elija Home Assistant / weewx / Meteobridge / Node-RED. La última pantalla muestra una ruta como /station/kw7n-4hpd-x2vt; la parte después de /station/ es el token. Luego elija los estados de ioBroker con los valores de la estación; los que falten simplemente no se envían.",
+  "Forward a station": "Reenviar una estación",
+  "Station token": "Token de estación",
+  "Device id (any text; keep it stable)": "ID de dispositivo (cualquier texto; manténgalo estable)",
+  "Receiver": "Receptor",
+  "Temperature (°C)": "Temperatura (°C)",
+  "Humidity (%)": "Humedad (%)",
+  "Pressure at station level (hPa)": "Presión a nivel de estación (hPa)",
+  "Wind speed": "Velocidad del viento",
+  "Wind unit": "Unidad del viento",
+  "Wind gusts": "Rachas",
+  "Wind direction (°)": "Dirección del viento (°)",
+  "Rain total (mm, a counter that only grows)": "Lluvia total (mm, un contador que solo crece)",
+  "Solar radiation (W/m²)": "Radiación solar (W/m²)",
+  "Light (lux), if no W/m²": "Luz (lux), si no hay W/m²",
+  "m/s": "m/s",
+  "km/h": "km/h",
+  "The garden is mostly": "El jardín es sobre todo",
+  "Lawn": "Césped",
+  "Vegetables": "Hortalizas",
+  "Flower beds and shrubs": "Arriates y arbustos",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "Caudal del aspersor (mm por hora; 0 = solo mm)",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "Avanzado: valores agronómicos (ventana de pulverización, ET0 por hora, mojado foliar, VPD, delta T)"
+}

package/admin/i18n/fr/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "Lire depuis NuaSense",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "Une clé API de platform.nuasense.com, API Keys, avec la portée ingest:write. Laisser vide pour seulement transférer une station.",
+  "API key": "Clé API",
+  "Station id (empty = all stations on the account)": "ID de station (vide = toutes les stations du compte)",
+  "Read every (minutes)": "Lire toutes les (minutes)",
+  "API address": "Adresse de l'API",
+  "Forward a station to NuaSense": "Transférer une station vers NuaSense",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "Dans la console NuaSense : External stations, Add a station, choisir Home Assistant / weewx / Meteobridge / Node-RED. Le dernier écran affiche un chemin comme /station/kw7n-4hpd-x2vt ; la partie après /station/ est le jeton. Choisissez ensuite les états ioBroker contenant les valeurs de la station ; les valeurs manquantes ne sont simplement pas envoyées.",
+  "Forward a station": "Transférer une station",
+  "Station token": "Jeton de station",
+  "Device id (any text; keep it stable)": "ID d'appareil (texte libre ; ne pas changer)",
+  "Receiver": "Récepteur",
+  "Temperature (°C)": "Température (°C)",
+  "Humidity (%)": "Humidité (%)",
+  "Pressure at station level (hPa)": "Pression au niveau de la station (hPa)",
+  "Wind speed": "Vitesse du vent",
+  "Wind unit": "Unité du vent",
+  "Wind gusts": "Rafales",
+  "Wind direction (°)": "Direction du vent (°)",
+  "Rain total (mm, a counter that only grows)": "Pluie totale (mm, un compteur qui ne fait qu'augmenter)",
+  "Solar radiation (W/m²)": "Rayonnement solaire (W/m²)",
+  "Light (lux), if no W/m²": "Lumière (lux), si pas de W/m²",
+  "m/s": "m/s",
+  "km/h": "km/h",
+  "The garden is mostly": "Le jardin est surtout",
+  "Lawn": "Pelouse",
+  "Vegetables": "Légumes",
+  "Flower beds and shrubs": "Massifs et arbustes",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "Débit de l'arroseur (mm par heure ; 0 = mm seulement)",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "Avancé : valeurs agronomiques (fenêtre de pulvérisation, ET0 par heure, humectation foliaire, VPD, delta T)"
+}

package/admin/i18n/it/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "Leggi da NuaSense",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "Una chiave API da platform.nuasense.com, API Keys, con lo scope ingest:write. Lascia vuoto se vuoi solo inoltrare una stazione.",
+  "API key": "Chiave API",
+  "Station id (empty = all stations on the account)": "ID stazione (vuoto = tutte le stazioni dell'account)",
+  "Read every (minutes)": "Leggi ogni (minuti)",
+  "API address": "Indirizzo API",
+  "Forward a station to NuaSense": "Inoltra una stazione a NuaSense",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "Nella console NuaSense: External stations, Add a station, scegli Home Assistant / weewx / Meteobridge / Node-RED. L'ultima schermata mostra un percorso come /station/kw7n-4hpd-x2vt; la parte dopo /station/ è il token. Poi scegli gli stati ioBroker con i valori della stazione; quelli mancanti semplicemente non vengono inviati.",
+  "Forward a station": "Inoltra una stazione",
+  "Station token": "Token della stazione",
+  "Device id (any text; keep it stable)": "ID dispositivo (testo libero; non cambiarlo)",
+  "Receiver": "Ricevitore",
+  "Temperature (°C)": "Temperatura (°C)",
+  "Humidity (%)": "Umidità (%)",
+  "Pressure at station level (hPa)": "Pressione a livello stazione (hPa)",
+  "Wind speed": "Velocità del vento",
+  "Wind unit": "Unità del vento",
+  "Wind gusts": "Raffiche",
+  "Wind direction (°)": "Direzione del vento (°)",
+  "Rain total (mm, a counter that only grows)": "Pioggia totale (mm, un contatore che cresce soltanto)",
+  "Solar radiation (W/m²)": "Radiazione solare (W/m²)",
+  "Light (lux), if no W/m²": "Luce (lux), se non ci sono W/m²",
+  "m/s": "m/s",
+  "km/h": "km/h",
+  "The garden is mostly": "Il giardino è soprattutto",
+  "Lawn": "Prato",
+  "Vegetables": "Ortaggi",
+  "Flower beds and shrubs": "Aiuole e arbusti",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "Portata dell'irrigatore (mm all'ora; 0 = solo mm)",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "Avanzate: valori agronomici (finestra di irrorazione, ET0 orario, bagnatura fogliare, VPD, delta T)"
+}

package/admin/i18n/nl/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "Lezen van NuaSense",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "Een API-sleutel van platform.nuasense.com, API Keys, met de scope ingest:write. Leeg laten als je alleen een station wilt doorsturen.",
+  "API key": "API-sleutel",
+  "Station id (empty = all stations on the account)": "Station-id (leeg = alle stations van het account)",
+  "Read every (minutes)": "Lezen elke (minuten)",
+  "API address": "API-adres",
+  "Forward a station to NuaSense": "Een station doorsturen naar NuaSense",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "In de NuaSense-console: External stations, Add a station, kies Home Assistant / weewx / Meteobridge / Node-RED. Het laatste scherm toont een pad zoals /station/kw7n-4hpd-x2vt; het deel na /station/ is de token. Kies daarna de ioBroker-states met de waarden van je station; ontbrekende worden simpelweg niet verzonden.",
+  "Forward a station": "Een station doorsturen",
+  "Station token": "Stationstoken",
+  "Device id (any text; keep it stable)": "Apparaat-id (willekeurige tekst; stabiel houden)",
+  "Receiver": "Ontvanger",
+  "Temperature (°C)": "Temperatuur (°C)",
+  "Humidity (%)": "Luchtvochtigheid (%)",
+  "Pressure at station level (hPa)": "Luchtdruk op stationshoogte (hPa)",
+  "Wind speed": "Windsnelheid",
+  "Wind unit": "Windeenheid",
+  "Wind gusts": "Windstoten",
+  "Wind direction (°)": "Windrichting (°)",
+  "Rain total (mm, a counter that only grows)": "Regen totaal (mm, een teller die alleen groeit)",
+  "Solar radiation (W/m²)": "Zonnestraling (W/m²)",
+  "Light (lux), if no W/m²": "Licht (lux), als er geen W/m² is",
+  "m/s": "m/s",
+  "km/h": "km/u",
+  "The garden is mostly": "De tuin is vooral",
+  "Lawn": "Gazon",
+  "Vegetables": "Groenten",
+  "Flower beds and shrubs": "Borders en struiken",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "Sproeiercapaciteit (mm per uur; 0 = alleen mm)",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "Geavanceerd: agronomische waarden (spuitvenster, ET0 per uur, bladnat, VPD, delta T)"
+}

package/admin/i18n/pl/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "Odczyt z NuaSense",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "Klucz API z platform.nuasense.com, API Keys, z zakresem ingest:write. Zostaw puste, jeśli chcesz tylko przekazywać stację.",
+  "API key": "Klucz API",
+  "Station id (empty = all stations on the account)": "ID stacji (puste = wszystkie stacje konta)",
+  "Read every (minutes)": "Odczyt co (minut)",
+  "API address": "Adres API",
+  "Forward a station to NuaSense": "Przekazuj stację do NuaSense",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "W konsoli NuaSense: External stations, Add a station, wybierz Home Assistant / weewx / Meteobridge / Node-RED. Ostatni ekran pokazuje ścieżkę jak /station/kw7n-4hpd-x2vt; część po /station/ to token. Następnie wybierz stany ioBroker z wartościami stacji; brakujące po prostu nie są wysyłane.",
+  "Forward a station": "Przekazuj stację",
+  "Station token": "Token stacji",
+  "Device id (any text; keep it stable)": "ID urządzenia (dowolny tekst; nie zmieniaj)",
+  "Receiver": "Odbiornik",
+  "Temperature (°C)": "Temperatura (°C)",
+  "Humidity (%)": "Wilgotność (%)",
+  "Pressure at station level (hPa)": "Ciśnienie na poziomie stacji (hPa)",
+  "Wind speed": "Prędkość wiatru",
+  "Wind unit": "Jednostka wiatru",
+  "Wind gusts": "Porywy wiatru",
+  "Wind direction (°)": "Kierunek wiatru (°)",
+  "Rain total (mm, a counter that only grows)": "Deszcz łącznie (mm, licznik tylko rośnie)",
+  "Solar radiation (W/m²)": "Promieniowanie słoneczne (W/m²)",
+  "Light (lux), if no W/m²": "Światło (lux), jeśli brak W/m²",
+  "m/s": "m/s",
+  "km/h": "km/h",
+  "The garden is mostly": "Ogród to głównie",
+  "Lawn": "Trawnik",
+  "Vegetables": "Warzywa",
+  "Flower beds and shrubs": "Rabaty i krzewy",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "Wydajność zraszacza (mm na godzinę; 0 = tylko mm)",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "Zaawansowane: wartości agronomiczne (okno oprysku, ET0 na godzinę, zwilżenie liści, VPD, delta T)"
+}

package/admin/i18n/pt/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "Ler do NuaSense",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "Uma chave de API de platform.nuasense.com, API Keys, com o escopo ingest:write. Deixe vazio se quiser apenas encaminhar uma estação.",
+  "API key": "Chave de API",
+  "Station id (empty = all stations on the account)": "ID da estação (vazio = todas as estações da conta)",
+  "Read every (minutes)": "Ler a cada (minutos)",
+  "API address": "Endereço da API",
+  "Forward a station to NuaSense": "Encaminhar uma estação para o NuaSense",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "No console NuaSense: External stations, Add a station, escolha Home Assistant / weewx / Meteobridge / Node-RED. A última tela mostra um caminho como /station/kw7n-4hpd-x2vt; a parte após /station/ é o token. Depois escolha os estados do ioBroker com os valores da estação; os ausentes simplesmente não são enviados.",
+  "Forward a station": "Encaminhar uma estação",
+  "Station token": "Token da estação",
+  "Device id (any text; keep it stable)": "ID do dispositivo (qualquer texto; mantenha estável)",
+  "Receiver": "Receptor",
+  "Temperature (°C)": "Temperatura (°C)",
+  "Humidity (%)": "Umidade (%)",
+  "Pressure at station level (hPa)": "Pressão ao nível da estação (hPa)",
+  "Wind speed": "Velocidade do vento",
+  "Wind unit": "Unidade do vento",
+  "Wind gusts": "Rajadas de vento",
+  "Wind direction (°)": "Direção do vento (°)",
+  "Rain total (mm, a counter that only grows)": "Chuva total (mm, um contador que só cresce)",
+  "Solar radiation (W/m²)": "Radiação solar (W/m²)",
+  "Light (lux), if no W/m²": "Luz (lux), se não houver W/m²",
+  "m/s": "m/s",
+  "km/h": "km/h",
+  "The garden is mostly": "O jardim é sobretudo",
+  "Lawn": "Relvado",
+  "Vegetables": "Hortícolas",
+  "Flower beds and shrubs": "Canteiros e arbustos",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "Débito do aspersor (mm por hora; 0 = só mm)",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "Avançado: valores agronómicos (janela de pulverização, ET0 por hora, molhamento foliar, VPD, delta T)"
+}

package/admin/i18n/ru/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "Чтение из NuaSense",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "API-ключ с platform.nuasense.com, API Keys, с областью ingest:write. Оставьте пустым, если нужно только пересылать станцию.",
+  "API key": "API-ключ",
+  "Station id (empty = all stations on the account)": "ID станции (пусто = все станции аккаунта)",
+  "Read every (minutes)": "Читать каждые (минут)",
+  "API address": "Адрес API",
+  "Forward a station to NuaSense": "Пересылать станцию в NuaSense",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "В консоли NuaSense: External stations, Add a station, выберите Home Assistant / weewx / Meteobridge / Node-RED. Последний экран показывает путь вида /station/kw7n-4hpd-x2vt; часть после /station/ — это токен. Затем выберите состояния ioBroker со значениями станции; отсутствующие просто не отправляются.",
+  "Forward a station": "Пересылать станцию",
+  "Station token": "Токен станции",
+  "Device id (any text; keep it stable)": "ID устройства (любой текст; не меняйте)",
+  "Receiver": "Приёмник",
+  "Temperature (°C)": "Температура (°C)",
+  "Humidity (%)": "Влажность (%)",
+  "Pressure at station level (hPa)": "Давление на уровне станции (гПа)",
+  "Wind speed": "Скорость ветра",
+  "Wind unit": "Единица ветра",
+  "Wind gusts": "Порывы ветра",
+  "Wind direction (°)": "Направление ветра (°)",
+  "Rain total (mm, a counter that only grows)": "Осадки всего (мм, счётчик только растёт)",
+  "Solar radiation (W/m²)": "Солнечная радиация (Вт/м²)",
+  "Light (lux), if no W/m²": "Освещённость (лк), если нет Вт/м²",
+  "m/s": "м/с",
+  "km/h": "км/ч",
+  "The garden is mostly": "Сад — это в основном",
+  "Lawn": "Газон",
+  "Vegetables": "Овощи",
+  "Flower beds and shrubs": "Клумбы и кустарники",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "Интенсивность дождевателя (мм в час; 0 = только мм)",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "Расширенные: агрономические значения (окно опрыскивания, ET0 в час, увлажнение листьев, VPD, delta T)"
+}

package/admin/i18n/uk/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "Читання з NuaSense",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "API-ключ з platform.nuasense.com, API Keys, з областю ingest:write. Залиште порожнім, якщо потрібно лише пересилати станцію.",
+  "API key": "API-ключ",
+  "Station id (empty = all stations on the account)": "ID станції (порожньо = усі станції облікового запису)",
+  "Read every (minutes)": "Читати кожні (хвилин)",
+  "API address": "Адреса API",
+  "Forward a station to NuaSense": "Пересилати станцію до NuaSense",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "У консолі NuaSense: External stations, Add a station, оберіть Home Assistant / weewx / Meteobridge / Node-RED. Останній екран показує шлях на кшталт /station/kw7n-4hpd-x2vt; частина після /station/ — це токен. Потім оберіть стани ioBroker зі значеннями станції; відсутні просто не надсилаються.",
+  "Forward a station": "Пересилати станцію",
+  "Station token": "Токен станції",
+  "Device id (any text; keep it stable)": "ID пристрою (будь-який текст; не змінюйте)",
+  "Receiver": "Приймач",
+  "Temperature (°C)": "Температура (°C)",
+  "Humidity (%)": "Вологість (%)",
+  "Pressure at station level (hPa)": "Тиск на рівні станції (гПа)",
+  "Wind speed": "Швидкість вітру",
+  "Wind unit": "Одиниця вітру",
+  "Wind gusts": "Пориви вітру",
+  "Wind direction (°)": "Напрямок вітру (°)",
+  "Rain total (mm, a counter that only grows)": "Опади всього (мм, лічильник лише зростає)",
+  "Solar radiation (W/m²)": "Сонячна радіація (Вт/м²)",
+  "Light (lux), if no W/m²": "Освітленість (лк), якщо немає Вт/м²",
+  "m/s": "м/с",
+  "km/h": "км/год",
+  "The garden is mostly": "Сад — це переважно",
+  "Lawn": "Газон",
+  "Vegetables": "Овочі",
+  "Flower beds and shrubs": "Клумби та кущі",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "Інтенсивність дощувача (мм на годину; 0 = лише мм)",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "Розширені: агрономічні значення (вікно обприскування, ET0 за годину, зволоження листя, VPD, delta T)"
+}

package/admin/i18n/zh-cn/translations.json

@@ -0,0 +1,32 @@
+{
+  "Read from NuaSense": "从 NuaSense 读取",
+  "An API key from platform.nuasense.com, API Keys, with the ingest:write scope. Leave empty if you only want to forward a station.": "来自 platform.nuasense.com 的 API 密钥（API Keys，范围 ingest:write）。如只需转发气象站，请留空。",
+  "API key": "API 密钥",
+  "Station id (empty = all stations on the account)": "气象站 ID（留空 = 账户中的所有气象站）",
+  "Read every (minutes)": "读取间隔（分钟）",
+  "API address": "API 地址",
+  "Forward a station to NuaSense": "将气象站转发到 NuaSense",
+  "In the NuaSense console: External stations, Add a station, pick Home Assistant / weewx / Meteobridge / Node-RED. The last screen shows a path like /station/kw7n-4hpd-x2vt; the part after /station/ is the token. Then pick the ioBroker states that hold your station's values; missing ones are simply not sent.": "在 NuaSense 控制台：External stations，Add a station，选择 Home Assistant / weewx / Meteobridge / Node-RED。最后一屏显示类似 /station/kw7n-4hpd-x2vt 的路径；/station/ 之后的部分即令牌。然后选择保存气象站数值的 ioBroker 状态；缺失的值不会被发送。",
+  "Forward a station": "转发气象站",
+  "Station token": "气象站令牌",
+  "Device id (any text; keep it stable)": "设备 ID（任意文本；保持不变）",
+  "Receiver": "接收端",
+  "Temperature (°C)": "温度（°C）",
+  "Humidity (%)": "湿度（%）",
+  "Pressure at station level (hPa)": "站点气压（hPa）",
+  "Wind speed": "风速",
+  "Wind unit": "风速单位",
+  "Wind gusts": "阵风",
+  "Wind direction (°)": "风向（°）",
+  "Rain total (mm, a counter that only grows)": "累计降雨（mm，只增不减的计数器）",
+  "Solar radiation (W/m²)": "太阳辐射（W/m²）",
+  "Light (lux), if no W/m²": "光照（lux，无 W/m² 时）",
+  "m/s": "m/s",
+  "km/h": "km/h",
+  "The garden is mostly": "花园主要是",
+  "Lawn": "草坪",
+  "Vegetables": "蔬菜",
+  "Flower beds and shrubs": "花坛与灌木",
+  "Sprinkler rate (mm per hour; 0 = only mm)": "喷头强度（毫米/小时；0 = 仅显示毫米）",
+  "Advanced: agronomy values (spray window, ET0 per hour, leaf wetness, VPD, delta T)": "高级：农艺数值（喷药窗口、每小时 ET0、叶面湿润、VPD、delta T）"
+}