iobroker.govee-smart 2.32.1 → 2.34.0

package/README.md

@@ -103,6 +103,30 @@ This adapter's MQTT authentication and BLE-over-LAN (ptReal) protocol implementa
     ### **WORK IN PROGRESS**
 -->
 
+### 2.34.0 (2026-09-10)
+
+- Fixed: Air purifiers, heaters, humidifiers and fans — choosing a mode or a speed now reaches the device, where the adapter used to send a value Govee rejected as "Invalid parameter type" (#47)
+- Fixed: The speed selector of an air purifier now offers the levels the device actually has, instead of the single unusable entry it showed before (#47)
+- Fixed: On an appliance updating from an older version the level datapoint accepts values again — it kept the selection list of the previous version and refused every write against it
+- Changed: On appliances whose modes share the same level numbers — kettles, some fans and humidifiers — the level is a plain number now; a selection list could only ever show one mode's levels
+- Fixed: An installation with no light at all now reads its device states at start — filter life, air quality and every other reported value stayed empty forever (#47)
+- Fixed: A heater's target temperature is sent in the shape the Govee API asks for, and the datapoint is labelled in the unit the heater itself reports — a 5–30 °C heater used to read °F
+- Fixed: The current speed level now arrives from the cloud together with the mode — until now only the mode updated while the level datapoint kept showing its default
+- Fixed: A command the Govee cloud rejects no longer counts as successful, so the datapoint stops showing a change the device never made, and the reason is named
+- New: A device's night-light scene is selectable — the adapter received the scene list and the current scene from Govee and threw both away without creating a datapoint
+- Fixed: The scene dropdown's "---" entry now carries the same value the adapter writes when it resets the dropdown, so the entry stopped being rewritten on every start
+- New: The H7127 air purifier is confirmed by a user report — it is no longer listed as untested and no longer asks for the experimental switch at start
+- Changed: The diagnostics report no longer repeats the privacy note the export button already shows, and says instead what only the file itself can say
+
+### 2.33.0 (2026-09-08)
+
+- Fixed: A light without a local API stays reachable while it reports its own state — Govee's device list lagged behind the bulb and overrode it every two minutes (reported for the H600D)
+- Fixed: A status message the Govee cloud replays after a reconnect no longer counts as a fresh sign of life for the next half hour
+- New: The H600D GU10 smart bulb is recognised from a user report
+- New: 486 more Govee models start as experimental — every model the homebridge-govee project lists as of September 2026, from bulbs and strips to fans, heaters and ice makers
+- New: An experimental model is tried by enabling "experimental device support"; a diagnostics report from the Expert tab confirms it for everyone
+- Changed: The wiki's device list folds each device type into one block with its counts, so 602 entries stay readable
+
 ### 2.32.1 (2026-09-07)
 
 - Fixed: Your devices and their recorded history no longer disappear from the object tree when the Govee cloud cannot be reached at startup
@@ -124,25 +148,6 @@ This adapter's MQTT authentication and BLE-over-LAN (ptReal) protocol implementa
 
 - Fixed: When the adapter met a device model it does not know yet, its log asked the user to press a button that 2.31.0 had removed — it now points at the Expert tab, where the report is actually made
 
-### 2.31.0 (2026-09-03)
-
-- Fixed: On instances upgraded from 2.27.0 or newer, every admin card was dead — diagnostics, segment wizard and connection test alike; affected installations repair themselves on the next start
-- Fixed: A card that could not reach the adapter reported "no devices yet" instead of the real error
-- Changed: Segment detection and diagnostics now share one **Expert** tab with a button each
-- Changed: The per-device `diag.export` button is gone; the Expert tab builds the report and hands you the file in one press
-- Changed: `diag.lastExport` now records WHEN the last report was taken, instead of naming the file
-- Improved: Both cards say "Loading devices …" while they search, and explain the wait if it takes long
-- Fixed: The diagnostics report still described the reachability rule as it was before 2.30.0
-
-### 2.30.0 (2026-09-03)
-
-- Fixed: Devices without a local API were shown as unreachable although they switched and reported normally; they now show as reachable for as long as they are
-- Fixed: Sensors and buttons behind a Govee gateway were shown as unreachable although their readings kept arriving; their gateway now decides whether they are reachable
-- Fixed: Appliances stayed marked as reachable for up to two minutes after they had actually gone offline
-- Improved: A device that is unplugged and put away is reported as unreachable within half an hour, instead of staying green until the adapter is restarted
-- New: 37 additional device models are recognised, including smart plugs, a button remote, an air quality monitor and an aroma diffuser
-- New: Battery buttons and remotes are supported as their own device kind, with battery level and reachability
-
 [Older changelogs can be found there](CHANGELOG_OLD.md)
 
 ## Support

package/admin/custom/assets/index-C-fBGUPX.js

@@ -0,0 +1 @@
+import"./virtual_mf-exposes___mfe_internal__ConfigCustomGoveeSegmentSet__customComponents_js-DtuKK_L7.js";import"./virtual_mf-REMOTE_ENTRY_ID___mfe_internal__ConfigCustomGoveeSegmentSet__customComponents_js-TmDuENES.js";import{$t as e,Ba as t,La as n,Qr as r,Ya as i,an as a,cn as o,ho as s,ya as c,za as l}from"./_virtual_mf___mfe_internal__ConfigCustomGoveeSegmentSet__mf_owner__1__loadShare___mf_0_iobroker_mf_1_gui_mf_2_components__loadShare__.js-BqaV2gc_.js";import{t as u}from"./_virtual_mf___mfe_internal__ConfigCustomGoveeSegmentSet__mf_owner__1__loadShare__react_mf_2_dom_mf_1_client__loadShare__.js-ld5_knuQ.js";import{n as d,t as f}from"./ExpertPanel-BnVeJBS6.js";(function(){let e=document.createElement(`link`).relList;if(e&&e.supports&&e.supports(`modulepreload`))return;for(let e of document.querySelectorAll(`link[rel="modulepreload"]`))n(e);new MutationObserver(e=>{for(let t of e)if(t.type===`childList`)for(let e of t.addedNodes)e.tagName===`LINK`&&e.rel===`modulepreload`&&n(e)}).observe(document,{childList:!0,subtree:!0});function t(e){let t={};return e.integrity&&(t.integrity=e.integrity),e.referrerPolicy&&(t.referrerPolicy=e.referrerPolicy),t.credentials=e.crossOrigin===`use-credentials`?`include`:e.crossOrigin===`anonymous`?`omit`:`same-origin`,t}function n(e){if(e.ep)return;e.ep=!0;let n=t(e);fetch(e.href,n)}})(),s();var p={gsw_deviceLabel:`Device`,gsw_noDevices:`No segment-capable devices found. Enter a Cloud API key in the adapter settings so device capabilities are known.`,gsw_start:`Start measuring`,gsw_measureHint:`Watch the strip — which segment lights up bright white?`,gsw_question:`Segment %s — is it lit?`,gsw_lit:`Lit`,gsw_dark:`Dark (gap)`,gsw_finish:`Finished — end of strip`,gsw_cancel:`Cancel`,gsw_reviewHint:`Click a cell to flip lit / gap, then apply.`,gsw_resultNoGaps:`%s segments, no gaps`,gsw_resultGaps:`%s segments, %s gap(s)`,gsw_apply:`Apply`,gsw_remeasure:`Measure again`,gsw_applied:`Applied: %s segments.`,gsw_error:`Wizard error: %s`,gsw_close:`Close`,gsw_conn_lan_title:`LAN — always on`,gsw_conn_lan_desc:`Local control for lights. No credentials needed.`,gsw_conn_cloud_title:`Cloud API key`,gsw_conn_cloud_desc:`Optional. Adds device names, scenes, snapshots and segments.`,gsw_conn_apikey_label:`Govee API key`,gsw_conn_rt_title:`Real-time status (Govee account)`,gsw_conn_rt_desc:`Optional. Enables live status push over the Govee cloud (AWS IoT).`,gsw_conn_email_label:`Account email`,gsw_conn_password_label:`Account password`,gsw_conn_connect_btn:`Connect`,gsw_conn_2fa_hint:`Govee sent a verification code by email. Enter it here to finish sign-in.`,gsw_conn_code_label:`Verification code`,gsw_conn_request_btn:`Request new code`,gsw_conn_verify_btn:`Confirm code`,gsw_conn_st_ok:`Connected. Save the settings to keep real-time status enabled.`,gsw_conn_st_verifyRequired:`Govee needs a verification code for this device. Check your email and enter the code.`,gsw_conn_st_codeInvalid:`The verification code is invalid. Request a new one and try again.`,gsw_conn_st_passwordRejected:`Email or password was rejected. Please check your credentials.`,gsw_conn_st_emailNotRegistered:`This email is not registered with Govee.`,gsw_conn_st_rateLimited:`Too many attempts. Wait a while before trying again.`,gsw_conn_st_accountLocked:`The account is temporarily locked by Govee. Try again later.`,gsw_conn_st_loginFailed:`Login failed. Please try again.`,gsw_conn_st_mqttNotUp:`Real-time service is not ready yet. Try again in a moment.`,gsw_conn_st_codeSent:`A new verification code was sent to your email.`,gsw_conn_st_codeRejected:`Govee rejected the verification code. Request a new one.`,gsw_conn_st_needCredentials:`Enter email and password first.`,gsw_conn_st_throttled:`Please wait a moment before requesting another code.`,gsw_conn_st_unknownAction:`Unknown action.`,gsw_diagIntro:`Pick a device and press the button: the adapter builds a diagnostics report and your browser saves it as a file. Attach that file to a GitHub issue — the issue forms ask for exactly it.`,gsw_diagDevice:`Device`,gsw_diagExport:`Create report and download`,gsw_diagDone:`Saved as %s.`,gsw_diagOpenIssue:`Open an issue`,gsw_diagNoDevices:`No devices yet. The report is per device — once the adapter has found one, it appears here.`,gsw_diagExportFailed:`The report could not be created. The adapter log says why.`,gsw_diagPrivacy:`The report is pseudonymised: addresses, mail addresses and device names are replaced by stable markers, device ids are shortened, and credentials never appear.`,gsw_loadingDevices:`Loading devices …`,gsw_loadingDevicesSlow:`Still loading — this needs the adapter instance to be running.`,gsw_listFailed:`Could not load the device list. Is the instance running?`,gsw_deviceOption:`%s — currently %s segments`,gsw_expertIntro:`Two tools for when something needs a closer look. Pick one — the device list loads when you do.`,gsw_expertWizard:`Segment detection`,gsw_expertDiagnostics:`Diagnostics`},m={gsw_deviceLabel:`Gerät`,gsw_noDevices:`Keine Geräte mit Segmenten gefunden. Trage einen Cloud-API-Key in den Adaptereinstellungen ein, damit die Gerätefähigkeiten bekannt sind.`,gsw_start:`Messung starten`,gsw_measureHint:`Beobachte den Strip — welches Segment leuchtet hell weiß auf?`,gsw_question:`Segment %s — leuchtet es?`,gsw_lit:`Leuchtet`,gsw_dark:`Dunkel (Lücke)`,gsw_finish:`Fertig — Strip zu Ende`,gsw_cancel:`Abbrechen`,gsw_reviewHint:`Zelle anklicken, um zwischen Leuchtet/Lücke zu wechseln, dann übernehmen.`,gsw_resultNoGaps:`%s Segmente, keine Lücke`,gsw_resultGaps:`%s Segmente, %s Lücke(n)`,gsw_apply:`Übernehmen`,gsw_remeasure:`Nochmal messen`,gsw_applied:`Übernommen: %s Segmente.`,gsw_error:`Wizard-Fehler: %s`,gsw_close:`Schließen`,gsw_conn_lan_title:`LAN — immer aktiv`,gsw_conn_lan_desc:`Lokale Steuerung für Lampen. Keine Zugangsdaten nötig.`,gsw_conn_cloud_title:`Cloud-API-Key`,gsw_conn_cloud_desc:`Optional. Ergänzt Gerätenamen, Szenen, Snapshots und Segmente.`,gsw_conn_apikey_label:`Govee-API-Key`,gsw_conn_rt_title:`Echtzeit-Status (Govee-Konto)`,gsw_conn_rt_desc:`Optional. Aktiviert Live-Status-Push über die Govee-Cloud (AWS IoT).`,gsw_conn_email_label:`Konto-E-Mail`,gsw_conn_password_label:`Konto-Passwort`,gsw_conn_connect_btn:`Verbinden`,gsw_conn_2fa_hint:`Govee hat einen Bestätigungscode per E-Mail geschickt. Zum Abschließen hier eingeben.`,gsw_conn_code_label:`Bestätigungscode`,gsw_conn_request_btn:`Neuen Code anfordern`,gsw_conn_verify_btn:`Code bestätigen`,gsw_conn_st_ok:`Verbunden. Zum dauerhaften Aktivieren die Einstellungen speichern.`,gsw_conn_st_verifyRequired:`Govee benötigt für dieses Gerät einen Bestätigungscode. E-Mail prüfen und Code eingeben.`,gsw_conn_st_codeInvalid:`Der Bestätigungscode ist ungültig. Neuen anfordern und erneut versuchen.`,gsw_conn_st_passwordRejected:`E-Mail oder Passwort wurde abgelehnt. Bitte Zugangsdaten prüfen.`,gsw_conn_st_emailNotRegistered:`Diese E-Mail ist bei Govee nicht registriert.`,gsw_conn_st_rateLimited:`Zu viele Versuche. Bitte etwas warten, bevor du es erneut versuchst.`,gsw_conn_st_accountLocked:`Das Konto ist vorübergehend von Govee gesperrt. Später erneut versuchen.`,gsw_conn_st_loginFailed:`Anmeldung fehlgeschlagen. Bitte erneut versuchen.`,gsw_conn_st_mqttNotUp:`Der Echtzeit-Dienst ist noch nicht bereit. Gleich erneut versuchen.`,gsw_conn_st_codeSent:`Ein neuer Bestätigungscode wurde an deine E-Mail geschickt.`,gsw_conn_st_codeRejected:`Govee hat den Bestätigungscode abgelehnt. Neuen anfordern.`,gsw_conn_st_needCredentials:`Zuerst E-Mail und Passwort eingeben.`,gsw_conn_st_throttled:`Bitte kurz warten, bevor du einen weiteren Code anforderst.`,gsw_conn_st_unknownAction:`Unbekannte Aktion.`,gsw_diagIntro:`Gerät wählen und auf den Knopf drücken: Der Adapter erstellt einen Diagnosebericht, und der Browser legt ihn als Datei ab. Diese Datei an ein GitHub-Issue anhängen — die Formulare fragen genau danach.`,gsw_diagDevice:`Gerät`,gsw_diagExport:`Bericht erstellen und herunterladen`,gsw_diagDone:`Gespeichert als %s.`,gsw_diagOpenIssue:`Issue eröffnen`,gsw_diagNoDevices:`Noch keine Geräte. Der Bericht gilt je Gerät — sobald der Adapter eines gefunden hat, erscheint es hier.`,gsw_diagExportFailed:`Der Bericht konnte nicht erstellt werden. Warum, steht im Adapter-Log.`,gsw_diagPrivacy:`Der Bericht ist anonymisiert: Adressen, E-Mail-Adressen und Gerätenamen werden durch gleichbleibende Marken ersetzt, Gerätekennungen gekürzt, Zugangsdaten tauchen gar nicht auf.`,gsw_loadingDevices:`Geräte werden geladen …`,gsw_loadingDevicesSlow:`Lädt noch — dafür muss die Adapter-Instanz laufen.`,gsw_listFailed:`Die Geräteliste konnte nicht geladen werden. Läuft die Instanz?`,gsw_deviceOption:`%s — bisher %s Segmente`,gsw_expertIntro:`Zwei Werkzeuge für den genaueren Blick. Eines auswählen — die Geräteliste wird dann geladen.`,gsw_expertWizard:`Segment-Erkennung`,gsw_expertDiagnostics:`Diagnose`},h={app:e=>({backgroundColor:e.palette.background.default,color:e.palette.text.primary,height:`100%`}),item:{padding:50,width:600}},g=class extends e{constructor(e){let t={...e};super(e,t),this.state={...this.state,data:{},originalData:{},theme:this.createTheme()},a.extendTranslations(p,`en`),a.extendTranslations(m,`de`);let n=(navigator.language||navigator.userLanguage||`en`).toLowerCase();a.setLanguage(n.substring(0,2))}render(){return this.state.loaded?l(n,{injectFirst:!0,children:l(c,{theme:this.state.theme,children:t(r,{sx:h.app,children:[l(`div`,{style:h.item,children:l(d,{socket:this.socket,namespace:`${this.adapterName}.${this.instance}`,values:{apiKey:String(this.state.data.apiKey??``),email:String(this.state.data.goveeEmail??``),password:String(this.state.data.goveePassword??``),code:String(this.state.data.mqttVerificationCode??``)},onChange:(e,t)=>this.setState({data:{...this.state.data,[e]:t}})})}),l(`div`,{style:h.item,children:l(f,{socket:this.socket,namespace:`${this.adapterName}.${this.instance}`})})]})})}):l(n,{injectFirst:!0,children:l(c,{theme:this.state.theme,children:l(o,{themeType:this.state.themeType})})})}};s(),window.adapterName=`govee-smart`;var _=document.getElementById(`root`);_&&u(_).render(l(i.StrictMode,{children:l(g,{socket:{port:8081}})}));

package/admin/custom/assets/{mf-entry-bootstrap-0-cd5e50f5.js → mf-entry-bootstrap-0-0502dc7c.js}

@@ -32,4 +32,4 @@ const __mfImport = (src) =>
   if (__mfModuleCache.pendingShareLoads) {
     await Promise.all(__mfModuleCache.pendingShareLoads);
   }
-})().then(() => __mfImport("./index-CStRjtPo.js"));
+})().then(() => __mfImport("./index-C-fBGUPX.js"));

package/admin/custom/i18n/de.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "Issue eröffnen",
   "gsw_diagNoDevices": "Noch keine Geräte. Der Bericht gilt je Gerät — sobald der Adapter eines gefunden hat, erscheint es hier.",
   "gsw_diagExportFailed": "Der Bericht konnte nicht erstellt werden. Warum, steht im Adapter-Log.",
-  "gsw_diagPrivacy": "Der Bericht ist anonymisiert: Adressen, E-Mail-Adressen und Gerätenamen werden durch gleichbleibende Marken ersetzt, Gerätekennungen gekürzt, Zugangsdaten tauchen gar nicht auf. Die Datei erklärt das in ihrem eigenen Kopf.",
+  "gsw_diagPrivacy": "Der Bericht ist anonymisiert: Adressen, E-Mail-Adressen und Gerätenamen werden durch gleichbleibende Marken ersetzt, Gerätekennungen gekürzt, Zugangsdaten tauchen gar nicht auf.",
   "gsw_loadingDevices": "Geräte werden geladen …",
   "gsw_loadingDevicesSlow": "Lädt noch — dafür muss die Adapter-Instanz laufen.",
   "gsw_listFailed": "Die Geräteliste konnte nicht geladen werden. Läuft die Instanz?",

package/admin/custom/i18n/en.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "Open an issue",
   "gsw_diagNoDevices": "No devices yet. The report is per device — once the adapter has found one, it appears here.",
   "gsw_diagExportFailed": "The report could not be created. The adapter log says why.",
-  "gsw_diagPrivacy": "The report is pseudonymised: addresses, mail addresses and device names are replaced by stable markers, device ids are shortened, and credentials never appear. The file explains this in its own header.",
+  "gsw_diagPrivacy": "The report is pseudonymised: addresses, mail addresses and device names are replaced by stable markers, device ids are shortened, and credentials never appear.",
   "gsw_loadingDevices": "Loading devices …",
   "gsw_loadingDevicesSlow": "Still loading — this needs the adapter instance to be running.",
   "gsw_listFailed": "Could not load the device list. Is the instance running?",

package/admin/custom/i18n/es.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "Abrir una issue",
   "gsw_diagNoDevices": "Aún no hay dispositivos. El informe es por dispositivo: en cuanto el adaptador encuentre uno, aparecerá aquí.",
   "gsw_diagExportFailed": "No se pudo crear el informe. El registro del adaptador explica por qué.",
-  "gsw_diagPrivacy": "El informe está seudonimizado: direcciones, direcciones de correo y nombres de dispositivos se sustituyen por marcadores estables, los identificadores se acortan y las credenciales nunca aparecen. El archivo lo explica en su propia cabecera.",
+  "gsw_diagPrivacy": "El informe está seudonimizado: direcciones, direcciones de correo y nombres de dispositivos se sustituyen por marcadores estables, los identificadores se acortan y las credenciales nunca aparecen.",
   "gsw_loadingDevices": "Cargando dispositivos …",
   "gsw_loadingDevicesSlow": "Sigue cargando: la instancia del adaptador debe estar en ejecución.",
   "gsw_listFailed": "No se pudo cargar la lista de dispositivos. ¿Está la instancia en ejecución?",

package/admin/custom/i18n/fr.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "Ouvrir une issue",
   "gsw_diagNoDevices": "Aucun appareil pour l'instant. Le rapport est par appareil — dès que l'adaptateur en trouve un, il apparaît ici.",
   "gsw_diagExportFailed": "Le rapport n'a pas pu être créé. Le journal de l'adaptateur en donne la raison.",
-  "gsw_diagPrivacy": "Le rapport est pseudonymisé : adresses, adresses mail et noms d'appareils sont remplacés par des marqueurs stables, les identifiants sont raccourcis et les identifiants de connexion n'y figurent jamais. Le fichier l'explique dans son en-tête.",
+  "gsw_diagPrivacy": "Le rapport est pseudonymisé : adresses, adresses mail et noms d'appareils sont remplacés par des marqueurs stables, les identifiants sont raccourcis et les identifiants de connexion n'y figurent jamais.",
   "gsw_loadingDevices": "Chargement des appareils …",
   "gsw_loadingDevicesSlow": "Chargement en cours — l'instance de l'adaptateur doit être démarrée.",
   "gsw_listFailed": "Impossible de charger la liste des appareils. L'instance est-elle démarrée ?",

package/admin/custom/i18n/it.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "Apri una issue",
   "gsw_diagNoDevices": "Ancora nessun dispositivo. Il rapporto è per dispositivo — appena l'adattatore ne trova uno, compare qui.",
   "gsw_diagExportFailed": "Non è stato possibile creare il rapporto. Il log dell'adattatore spiega perché.",
-  "gsw_diagPrivacy": "Il rapporto è pseudonimizzato: indirizzi, indirizzi mail e nomi dei dispositivi sono sostituiti da marcatori stabili, gli id sono accorciati e le credenziali non compaiono mai. Il file lo spiega nella propria intestazione.",
+  "gsw_diagPrivacy": "Il rapporto è pseudonimizzato: indirizzi, indirizzi mail e nomi dei dispositivi sono sostituiti da marcatori stabili, gli id sono accorciati e le credenziali non compaiono mai.",
   "gsw_loadingDevices": "Caricamento dispositivi …",
   "gsw_loadingDevicesSlow": "Ancora in caricamento: l'istanza dell'adattatore deve essere in esecuzione.",
   "gsw_listFailed": "Impossibile caricare l'elenco dei dispositivi. L'istanza è in esecuzione?",

package/admin/custom/i18n/nl.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "Issue openen",
   "gsw_diagNoDevices": "Nog geen apparaten. Het rapport is per apparaat — zodra de adapter er een vindt, verschijnt het hier.",
   "gsw_diagExportFailed": "Het rapport kon niet worden gemaakt. Het adapterlogboek zegt waarom.",
-  "gsw_diagPrivacy": "Het rapport is gepseudonimiseerd: adressen, mailadressen en apparaatnamen worden vervangen door vaste markeringen, apparaat-ids worden ingekort en inloggegevens komen er niet in voor. Het bestand legt dit uit in zijn eigen kop.",
+  "gsw_diagPrivacy": "Het rapport is gepseudonimiseerd: adressen, mailadressen en apparaatnamen worden vervangen door vaste markeringen, apparaat-ids worden ingekort en inloggegevens komen er niet in voor.",
   "gsw_loadingDevices": "Apparaten laden …",
   "gsw_loadingDevicesSlow": "Nog bezig — hiervoor moet de adapterinstantie draaien.",
   "gsw_listFailed": "Kon de apparatenlijst niet laden. Draait de instantie?",

package/admin/custom/i18n/pl.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "Otwórz zgłoszenie",
   "gsw_diagNoDevices": "Brak urządzeń. Raport dotyczy pojedynczego urządzenia — gdy adapter jakieś znajdzie, pojawi się tutaj.",
   "gsw_diagExportFailed": "Nie udało się utworzyć raportu. Powód znajdziesz w logu adaptera.",
-  "gsw_diagPrivacy": "Raport jest pseudonimizowany: adresy, adresy e-mail i nazwy urządzeń zastępują stałe znaczniki, identyfikatory są skracane, a dane logowania nigdy się w nim nie pojawiają. Plik wyjaśnia to we własnym nagłówku.",
+  "gsw_diagPrivacy": "Raport jest pseudonimizowany: adresy, adresy e-mail i nazwy urządzeń zastępują stałe znaczniki, identyfikatory są skracane, a dane logowania nigdy się w nim nie pojawiają.",
   "gsw_loadingDevices": "Wczytywanie urządzeń …",
   "gsw_loadingDevicesSlow": "Nadal trwa wczytywanie — instancja adaptera musi być uruchomiona.",
   "gsw_listFailed": "Nie udało się wczytać listy urządzeń. Czy instancja działa?",

package/admin/custom/i18n/pt.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "Abrir um issue",
   "gsw_diagNoDevices": "Ainda sem dispositivos. O relatório é por dispositivo — assim que o adaptador encontrar um, aparece aqui.",
   "gsw_diagExportFailed": "Não foi possível criar o relatório. O log do adaptador diz porquê.",
-  "gsw_diagPrivacy": "O relatório é pseudonimizado: endereços, endereços de e-mail e nomes de dispositivos são substituídos por marcadores estáveis, os identificadores são encurtados e as credenciais nunca aparecem. O ficheiro explica isso no seu cabeçalho.",
+  "gsw_diagPrivacy": "O relatório é pseudonimizado: endereços, endereços de e-mail e nomes de dispositivos são substituídos por marcadores estáveis, os identificadores são encurtados e as credenciais nunca aparecem.",
   "gsw_loadingDevices": "A carregar dispositivos …",
   "gsw_loadingDevicesSlow": "Ainda a carregar — a instância do adaptador tem de estar em execução.",
   "gsw_listFailed": "Não foi possível carregar a lista de dispositivos. A instância está a correr?",

package/admin/custom/i18n/ru.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "Открыть issue",
   "gsw_diagNoDevices": "Пока нет устройств. Отчёт составляется по устройству — как только адаптер найдёт хотя бы одно, оно появится здесь.",
   "gsw_diagExportFailed": "Не удалось создать отчёт. Причина указана в журнале адаптера.",
-  "gsw_diagPrivacy": "Отчёт псевдонимизирован: адреса, почтовые адреса и имена устройств заменены постоянными метками, идентификаторы сокращены, учётные данные не попадают в него. Файл поясняет это в своём заголовке.",
+  "gsw_diagPrivacy": "Отчёт псевдонимизирован: адреса, почтовые адреса и имена устройств заменены постоянными метками, идентификаторы сокращены, учётные данные не попадают в него.",
   "gsw_loadingDevices": "Загрузка устройств …",
   "gsw_loadingDevicesSlow": "Всё ещё загружается — для этого экземпляр адаптера должен быть запущен.",
   "gsw_listFailed": "Не удалось загрузить список устройств. Экземпляр запущен?",

package/admin/custom/i18n/uk.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "Відкрити issue",
   "gsw_diagNoDevices": "Пристроїв ще немає. Звіт складається для пристрою — щойно адаптер знайде хоч один, він з'явиться тут.",
   "gsw_diagExportFailed": "Не вдалося створити звіт. Причина — у журналі адаптера.",
-  "gsw_diagPrivacy": "Звіт псевдонімізовано: адреси, поштові адреси та назви пристроїв замінено сталими мітками, ідентифікатори скорочено, а облікові дані не потрапляють до нього. Файл пояснює це у власному заголовку.",
+  "gsw_diagPrivacy": "Звіт псевдонімізовано: адреси, поштові адреси та назви пристроїв замінено сталими мітками, ідентифікатори скорочено, а облікові дані не потрапляють до нього.",
   "gsw_loadingDevices": "Завантаження пристроїв …",
   "gsw_loadingDevicesSlow": "Ще завантажується — для цього екземпляр адаптера має працювати.",
   "gsw_listFailed": "Не вдалося завантажити список пристроїв. Чи запущено екземпляр?",

package/admin/custom/i18n/zh-cn.json

@@ -51,7 +51,7 @@
   "gsw_diagOpenIssue": "创建 issue",
   "gsw_diagNoDevices": "暂无设备。报告是按设备生成的——适配器找到设备后会显示在这里。",
   "gsw_diagExportFailed": "无法生成报告。原因见适配器日志。",
-  "gsw_diagPrivacy": "报告已做匿名化处理：地址、邮件地址和设备名称被替换为固定标记，设备标识被缩短，凭据完全不会出现。文件在其头部对此作了说明。",
+  "gsw_diagPrivacy": "报告已做匿名化处理：地址、邮件地址和设备名称被替换为固定标记，设备标识被缩短，凭据完全不会出现。",
   "gsw_loadingDevices": "正在加载设备 …",
   "gsw_loadingDevicesSlow": "仍在加载 — 这需要适配器实例正在运行。",
   "gsw_listFailed": "无法加载设备列表。适配器实例正在运行吗？",

package/build/lib/capability-mapper.js

@@ -25,13 +25,16 @@ __export(capability_mapper_exports, {
   buildCloudStateDefs: () => buildCloudStateDefs,
   buildLanStateDefs: () => buildLanStateDefs,
   canonicalSyntheticId: () => canonicalSyntheticId,
+  classifyModeLevels: () => classifyModeLevels,
   getDefaultLanStates: () => getDefaultLanStates,
   getMusicModeOptions: () => getMusicModeOptions,
   hasDynamicSceneCapability: () => hasDynamicSceneCapability,
   mapCapabilities: () => mapCapabilities,
   mapCloudStateValue: () => mapCloudStateValue,
+  mapCloudStateValues: () => mapCloudStateValues,
   musicModeNameUsesRgb: () => musicModeNameUsesRgb,
-  planCloudCapabilityWrites: () => planCloudCapabilityWrites
+  planCloudCapabilityWrites: () => planCloudCapabilityWrites,
+  resolveWorkModeStruct: () => resolveWorkModeStruct
 });
 module.exports = __toCommonJS(capability_mapper_exports);
 var import_types = require("./types");
@@ -293,10 +296,10 @@ function mapColorSetting(cap) {
 }
 function mapMode(cap) {
   var _a;
-  if (cap.instance !== "presetScene" || !Array.isArray((_a = cap.parameters) == null ? void 0 : _a.options)) {
+  if (typeof cap.instance !== "string" || !Array.isArray((_a = cap.parameters) == null ? void 0 : _a.options)) {
     return [];
   }
-  const states = { "": "---" };
+  const states = { 0: "---" };
   for (const opt of cap.parameters.options) {
     if (!opt || typeof opt.name !== "string") {
       continue;
@@ -306,13 +309,23 @@ function mapMode(cap) {
   }
   return [
     {
-      id: "scene",
-      name: (0, import_i18n.tName)("scene"),
+      // `presetScene` keeps the id it has had since the beginning — renaming it
+      // would orphan the datapoint on every existing installation. Every other
+      // instance takes its own sanitised name (nightlightScene →
+      // nightlight_scene), the same rule the rest of the mapper follows.
+      id: cap.instance === "presetScene" ? "scene" : sanitizeId(cap.instance),
+      // `capabilityName` is the shared resolver every other generic branch
+      // uses: it hands back the translation object for a known instance
+      // (`capNightlightScene` has existed in all 11 languages the whole time —
+      // only `mapMode` never asked for it) and the vendor text for an unknown
+      // one. `humanize()` here would put a plain string into `common.name`,
+      // which the object-inventory gate rejects fleet-wide.
+      name: cap.instance === "presetScene" ? (0, import_i18n.tName)("scene") : capabilityName(cap.instance),
       type: "mixed",
       role: "state",
       write: true,
       states,
-      def: "",
+      def: "0",
       capabilityType: cap.type,
       capabilityInstance: cap.instance
     }
@@ -370,6 +383,107 @@ function mapProperty(cap) {
     }
   ];
 }
+function classifyModeLevels(options) {
+  const levels = [];
+  const ranges = [];
+  for (const opt of options) {
+    if (!opt) {
+      continue;
+    }
+    const group = typeof opt.name === "string" ? opt.name : "";
+    if (Array.isArray(opt.options) && opt.options.length > 0) {
+      for (const sub of opt.options) {
+        const n2 = coerceNum(sub == null ? void 0 : sub.value);
+        if (n2 !== null) {
+          levels.push({ group, value: n2, name: typeof sub.name === "string" ? sub.name : void 0 });
+        }
+      }
+      continue;
+    }
+    const range = opt.range;
+    const rMin = coerceNum(range == null ? void 0 : range.min);
+    const rMax = coerceNum(range == null ? void 0 : range.max);
+    if (rMin !== null && rMax !== null) {
+      ranges.push({ min: rMin, max: rMax });
+      continue;
+    }
+    const n = coerceNum(opt.value);
+    if (n !== null) {
+      levels.push({ group: "", value: n, name: group || void 0 });
+    }
+  }
+  if (levels.length === 0 && ranges.length === 0) {
+    return { kind: "none" };
+  }
+  const named = levels.every((l) => l.name !== void 0);
+  const owners = /* @__PURE__ */ new Map();
+  let collision = false;
+  for (const l of levels) {
+    const seen = owners.get(l.value);
+    if (seen !== void 0 && seen !== l.group) {
+      collision = true;
+      break;
+    }
+    owners.set(l.value, l.group);
+  }
+  if (named && !collision && ranges.length === 0) {
+    const states = {};
+    for (const l of levels) {
+      states[safeStringify(l.value)] = l.name;
+    }
+    return { kind: "dropdown", states };
+  }
+  const all = [...levels.map((l) => l.value), ...ranges.map((r) => r.min), ...ranges.map((r) => r.max)];
+  return { kind: "number", min: Math.min(...all), max: Math.max(...all) };
+}
+function resolveWorkModeStruct(cap, workModeKey, modeValueKey, changed) {
+  var _a, _b, _c, _d, _e, _f, _g;
+  const fields = (_b = (_a = cap.parameters) == null ? void 0 : _a.fields) != null ? _b : [];
+  const modeOptions = (_d = (_c = fields.find((f) => f && f.fieldName === "workMode")) == null ? void 0 : _c.options) != null ? _d : [];
+  const levelOptions = (_f = (_e = fields.find((f) => f && f.fieldName === "modeValue")) == null ? void 0 : _e.options) != null ? _f : [];
+  const pick = (options, raw) => {
+    var _a2;
+    if (raw === null || raw === void 0) {
+      return void 0;
+    }
+    const s = String(raw).trim();
+    if (!s) {
+      return void 0;
+    }
+    return (_a2 = options.find((o) => o && o.value !== void 0 && o.value !== null && safeStringify(o.value) === s)) != null ? _a2 : options.find((o) => o && typeof o.name === "string" && o.name.toLowerCase() === s.toLowerCase());
+  };
+  const groups = levelOptions.filter((o) => o && Array.isArray(o.options) && o.options.length > 0);
+  const flatLevels = levelOptions.filter(
+    (o) => o && !Array.isArray(o.options) && o.value !== void 0 && o.value !== null
+  );
+  let modeOpt;
+  if (changed === "modeValue" && groups.length > 0 && classifyModeLevels(levelOptions).kind === "dropdown") {
+    const owner = groups.find((g) => pick(g.options, modeValueKey) !== void 0);
+    modeOpt = owner ? modeOptions.find((o) => o.name === owner.name) : void 0;
+  }
+  modeOpt != null ? modeOpt : modeOpt = pick(modeOptions, workModeKey);
+  const workMode = coerceNum(modeOpt == null ? void 0 : modeOpt.value);
+  if (modeOpt === void 0 || workMode === null) {
+    return null;
+  }
+  const groupEntry = levelOptions.find((o) => o && o.name === modeOpt.name);
+  const ownLevels = Array.isArray(groupEntry == null ? void 0 : groupEntry.options) && groupEntry.options.length > 0 ? groupEntry.options : flatLevels;
+  if (ownLevels.length > 0) {
+    const chosen = (_g = pick(ownLevels, modeValueKey)) != null ? _g : ownLevels[0];
+    const modeValue = coerceNum(chosen.value);
+    return modeValue === null ? null : { workMode, modeValue };
+  }
+  const range = groupEntry == null ? void 0 : groupEntry.range;
+  const rMin = coerceNum(range == null ? void 0 : range.min);
+  const rMax = coerceNum(range == null ? void 0 : range.max);
+  if (rMin !== null && rMax !== null) {
+    const written = coerceNum(modeValueKey);
+    const modeValue = written === null ? rMin : Math.min(Math.max(written, rMin), rMax);
+    return { workMode, modeValue };
+  }
+  const fallback = coerceNum(groupEntry == null ? void 0 : groupEntry.defaultValue);
+  return { workMode, modeValue: fallback != null ? fallback : 0 };
+}
 function mapWorkMode(cap) {
   var _a;
   const fields = (_a = cap.parameters) == null ? void 0 : _a.fields;
@@ -413,24 +527,36 @@ function mapWorkMode(cap) {
   const valueField = fields.find((f) => f && f.fieldName === "modeValue");
   if (valueField) {
     if (valueField.options && valueField.options.length > 0) {
-      const valStates = {};
-      for (const opt of valueField.options) {
-        if (opt && typeof opt.name === "string") {
-          valStates[safeStringify(opt.value)] = opt.name;
-        }
+      const level = classifyModeLevels(valueField.options);
+      if (level.kind === "dropdown") {
+        const firstKey = Object.keys(level.states)[0];
+        states.push({
+          id: "mode_value",
+          name: (0, import_i18n.tName)("modeValue"),
+          desc: (0, import_i18n.tDesc)("descModeValue"),
+          type: "mixed",
+          role: "state",
+          write: true,
+          states: level.states,
+          def: firstKey,
+          capabilityType: cap.type,
+          capabilityInstance: cap.instance
+        });
+      } else if (level.kind === "number") {
+        states.push({
+          id: "mode_value",
+          name: (0, import_i18n.tName)("modeValue"),
+          desc: (0, import_i18n.tDesc)("descModeValue"),
+          type: "number",
+          role: "level",
+          write: true,
+          min: level.min,
+          max: level.max,
+          def: level.min,
+          capabilityType: cap.type,
+          capabilityInstance: cap.instance
+        });
       }
-      states.push({
-        id: "mode_value",
-        name: (0, import_i18n.tName)("modeValue"),
-        desc: (0, import_i18n.tDesc)("descModeValue"),
-        type: "mixed",
-        role: "state",
-        write: true,
-        states: valStates,
-        def: valueField.options[0] ? safeStringify(valueField.options[0].value) : "",
-        capabilityType: cap.type,
-        capabilityInstance: cap.instance
-      });
     } else if (valueField.range) {
       states.push({
         id: "mode_value",
@@ -450,7 +576,7 @@ function mapWorkMode(cap) {
   return states;
 }
 function mapTemperatureSetting(cap) {
-  var _a, _b, _c, _d, _e, _f;
+  var _a, _b;
   const fields = (_a = cap.parameters) == null ? void 0 : _a.fields;
   if (Array.isArray(fields) && fields.length > 0) {
     const tempField = fields.find((f) => {
@@ -463,7 +589,7 @@ function mapTemperatureSetting(cap) {
       return f.fieldName.toLowerCase().includes("temperature");
     });
     if (tempField == null ? void 0 : tempField.range) {
-      const unit = (_c = normalizeUnit((_b = cap.parameters) == null ? void 0 : _b.unit)) != null ? _c : "\xB0F";
+      const unit = temperatureUnit(cap);
       return [
         {
           id: "target_temperature",
@@ -481,9 +607,9 @@ function mapTemperatureSetting(cap) {
       ];
     }
   }
-  const range = (_d = cap.parameters) == null ? void 0 : _d.range;
+  const range = (_b = cap.parameters) == null ? void 0 : _b.range;
   if (range) {
-    const unit = (_f = normalizeUnit((_e = cap.parameters) == null ? void 0 : _e.unit)) != null ? _f : "\xB0F";
+    const unit = temperatureUnit(cap);
     return [
       {
         id: "target_temperature",
@@ -628,8 +754,19 @@ const UNIT_MAP = {
   "unit.percent": "%",
   "unit.kelvin": "K",
   "unit.celsius": "\xB0C",
-  "unit.fahrenheit": "\xB0F"
+  "unit.fahrenheit": "\xB0F",
+  // The temperature_setting STRUCT names its unit like this (H7131 capture).
+  Celsius: "\xB0C",
+  Fahrenheit: "\xB0F"
 };
+function temperatureUnit(cap) {
+  var _a, _b, _c, _d, _e, _f;
+  const fields = (_a = cap.parameters) == null ? void 0 : _a.fields;
+  const unitField = fields == null ? void 0 : fields.find((f) => f && f.fieldName === "unit");
+  const declared = typeof (unitField == null ? void 0 : unitField.defaultValue) === "string" ? unitField.defaultValue : void 0;
+  const onTemperature = (_b = fields == null ? void 0 : fields.find((f) => f && f.fieldName === "temperature")) == null ? void 0 : _b.unit;
+  return (_f = (_e = (_c = normalizeUnit(declared)) != null ? _c : normalizeUnit(typeof onTemperature === "string" ? onTemperature : void 0)) != null ? _e : normalizeUnit((_d = cap.parameters) == null ? void 0 : _d.unit)) != null ? _f : "\xB0F";
+}
 function normalizeUnit(unit) {
   var _a;
   if (!unit) {
@@ -730,13 +867,13 @@ function mapCloudStateValue(cap) {
     case "toggle":
       return { stateId: sanitizeId(cap.instance), value: coerceBool(raw) };
     case "mode":
-      if (cap.instance === "presetScene") {
-        return {
-          stateId: "scene",
-          value: safeStringify(raw)
-        };
+      if (typeof cap.instance !== "string") {
+        return null;
       }
-      return null;
+      return {
+        stateId: cap.instance === "presetScene" ? "scene" : sanitizeId(cap.instance),
+        value: safeStringify(raw)
+      };
     case "dynamic_scene":
       if (cap.instance === "snapshot") {
         return null;
@@ -746,18 +883,12 @@ function mapCloudStateValue(cap) {
         value: safeStringify(raw)
       };
     case "work_mode": {
-      if (typeof raw === "object" && raw !== null) {
-        const struct = raw;
-        const n = coerceNum(struct.workMode);
-        if (n !== null) {
-          return { stateId: "work_mode", value: n };
-        }
-      }
-      const direct = coerceNum(raw);
-      if (direct !== null) {
-        return { stateId: "work_mode", value: direct };
+      const struct = typeof raw === "object" && raw !== null ? raw : void 0;
+      const n = coerceNum(struct ? struct.workMode : raw);
+      if (n === null) {
+        return null;
       }
-      return null;
+      return { stateId: "work_mode", value: safeStringify(n) };
     }
     case "temperature_setting": {
       const direct = coerceNum(raw);
@@ -800,16 +931,12 @@ function mapCloudStateValue(cap) {
       return null;
   }
 }
-function planCloudCapabilityWrites(caps, hasLanIp, lanStateIds) {
+function planCloudCapabilityWrites(caps, hasLanIp, lanStateIds, declared) {
   const writes = [];
   if (!Array.isArray(caps)) {
     return writes;
   }
-  for (const cap of caps) {
-    const mapped = mapCloudStateValue(cap);
-    if (!mapped) {
-      continue;
-    }
+  for (const mapped of caps.flatMap((cap) => mapCloudStateValues(cap, declared))) {
     if (hasLanIp && lanStateIds.has(mapped.stateId)) {
       continue;
     }
@@ -817,6 +944,27 @@ function planCloudCapabilityWrites(caps, hasLanIp, lanStateIds) {
   }
   return writes;
 }
+function mapCloudStateValues(cap, declared) {
+  var _a, _b, _c, _d, _e;
+  const primary = mapCloudStateValue(cap);
+  if (!primary) {
+    return [];
+  }
+  if (primary.stateId !== "work_mode") {
+    return [primary];
+  }
+  const raw = (_a = cap.state) == null ? void 0 : _a.value;
+  if (typeof raw !== "object" || raw === null) {
+    return [primary];
+  }
+  const level = coerceNum(raw.modeValue);
+  if (level === null) {
+    return [primary];
+  }
+  const levelOptions = (_e = (_d = (_c = (_b = declared == null ? void 0 : declared.find((c) => c.type === cap.type && c.instance === cap.instance)) == null ? void 0 : _b.parameters) == null ? void 0 : _c.fields) == null ? void 0 : _d.find((f) => f && f.fieldName === "modeValue")) == null ? void 0 : _e.options;
+  const asNumber = levelOptions !== void 0 && classifyModeLevels(levelOptions).kind === "number";
+  return [primary, { stateId: "mode_value", value: asNumber ? level : safeStringify(level) }];
+}
 const SCENE_DROPDOWN_RULES = [
   { id: "light_scene", cap: "lightScene", nameKey: "lightScene", channel: "scenes", source: (d) => d.scenes },
   { id: "diy_scene", cap: "diyScene", nameKey: "diyScene", channel: "scenes", source: (d) => d.diyScenes },
@@ -1082,12 +1230,15 @@ function buildGroupStateDefs(members) {
   buildCloudStateDefs,
   buildLanStateDefs,
   canonicalSyntheticId,
+  classifyModeLevels,
   getDefaultLanStates,
   getMusicModeOptions,
   hasDynamicSceneCapability,
   mapCapabilities,
   mapCloudStateValue,
+  mapCloudStateValues,
   musicModeNameUsesRgb,
-  planCloudCapabilityWrites
+  planCloudCapabilityWrites,
+  resolveWorkModeStruct
 });
 //# sourceMappingURL=capability-mapper.js.map