iobroker.ebus 3.3.1 → 3.3.3

package/README.md

@@ -69,6 +69,12 @@ Attention: command in datapoint ebus.0.cmd is deleted after executing of command
   Placeholder for the next version (at the beginning of the line):
   ### **WORK IN PROGRESS**
 -->
+### 3.3.3 (2024-07-12)
+ * (René) downgrade of "promise-socket" to 7.0.0
+
+### 3.3.2 (2024-07-11)
+ * (René) see issue #338: due to error in ebusd json no data are parsed
+
 ### 3.3.1 (2024-05-28)
 * (René) change of dependencies
 

package/io-package.json

@@ -1,8 +1,34 @@
 {
   "common": {
     "name": "ebus",
-    "version": "3.3.1",
+    "version": "3.3.3",
     "news": {
+      "3.3.3": {
+        "en": "downgrade of \"promise-socket\" to 7.0.0",
+        "de": "downgrade von \"promise-socket\" bis 7.0.0",
+        "ru": "понижение «промиза-сокет» до 7.0.0",
+        "pt": "downgrade de \"promise-socket\" para 7.0.0",
+        "nl": "downgrade van \"belofte-zak\" naar 7.0.0",
+        "fr": "downgrade de \"promise-socket\" à 7.0.0",
+        "it": "downgrade di \"promise-socket\" a 7.0.0",
+        "es": "bajada de \"promise-socket\" a 7.0.0",
+        "pl": "obniżenie wartości \"socket-socket\" do 7.0.0",
+        "uk": "до 7.0.0",
+        "zh-cn": "将\"承诺-口袋\"降级为7.0.0"
+      },
+      "3.3.2": {
+        "en": "(René) see issue #338: due to error in ebusd json no data are parsed",
+        "de": "(René) siehe Ausgabe #338: Durch Fehler in ebusd json werden keine Daten pariert",
+        "ru": "(René) см. вопрос #338: из-за ошибки в ebusd json никакие данные не спариваются",
+        "pt": "(René) veja a edição #338: devido ao erro no ebusd json nenhum dado é analisado",
+        "nl": "(René) zie probleem #338: als gevolg van fout in ebusd json geen gegevens worden ontleed",
+        "fr": "(René) voir le numéro 338 : en raison d'une erreur dans ebusd json aucune donnée n'est analysée",
+        "it": "(René) vedi problema #338: a causa di errore in ebusd json non vengono analizzati dati",
+        "es": "(René) ver el número #338: debido al error en ebusd json no se analizan los datos",
+        "pl": "(René) see issue # 338: due to error in ebudd json no data are parsed",
+        "uk": "(René) див. питання #338: через помилку в ebusd json немає даних",
+        "zh-cn": "(René)参见第338期:由于ebusd json中的错误,没有解析数据"
+      },
       "3.3.1": {
         "en": "(René) change of dependencies",
         "de": "(René) Veränderung der Abhängigkeiten",
@@ -67,32 +93,6 @@
         "pl": "przywróć „płaskie” z powrotem do wersji 5.x",
         "uk": "повернутися до версії 5.x",
         "zh-cn": "将“扁平”恢复至 5.x"
-      },
-      "3.2.3": {
-        "en": "dependencies updated",
-        "de": "Abhängigkeiten aktualisiert",
-        "ru": "зависимости обновлены",
-        "pt": "dependências atualizadas",
-        "nl": "afhankelijkheden bijgewerkt",
-        "fr": "dépendances mises à jour",
-        "it": "dipendenze aggiornate",
-        "es": "dependencias actualizadas",
-        "pl": "zaktualizowane zależności",
-        "uk": "залежності оновлено",
-        "zh-cn": "依赖更新"
-      },
-      "3.2.0": {
-        "en": "Attention: polled variables must be set to active \n\r search for available variables added",
-        "de": "Achtung: Gepollte Variablen müssen auf aktiv gesetzt werden\n\r Suche nach verfügbaren Variablen hinzugefügt",
-        "ru": "Внимание: опрашиваемые переменные должны быть активны\n\r добавлен поиск доступных переменных",
-        "pt": "Atenção: as variáveis ​​pesquisadas devem ser definidas como ativas\n\r busca por variáveis ​​disponíveis adicionadas",
-        "nl": "Let op: polled variabelen moeten op actief staan\n\r zoeken naar beschikbare variabelen toegevoegd",
-        "fr": "Attention : les variables interrogées doivent être définies sur actives\n\r rechercher les variables disponibles ajoutées",
-        "it": "Attenzione: le variabili interrogate devono essere impostate come attive\n\r cerca le variabili disponibili aggiunte",
-        "es": "Atención: las variables encuestadas deben configurarse como activas\n\r búsqueda de variables disponibles añadidas",
-        "pl": "Uwaga: zmienne odpytywane muszą być ustawione jako aktywne\n\r dodano wyszukiwanie dostępnych zmiennych",
-        "uk": "Увага: опитувані змінні мають бути активними\n\r додано пошук доступних змінних",
-        "zh-cn": "注意：轮询的变量必须设置为活动的\n\r 搜索添加的可用变量"
       }
     },
     "titleLang": {

package/main.js

@@ -608,6 +608,9 @@ function VersionCheck() {
 //get data via https in json -> this is the main data receiver; telnet just triggers ebusd to read data;
 //https://github.com/john30/ebusd/wiki/3.2.-HTTP-client
 
+
+
+
 async function ebusd_ReceiveData() {
 
     const sUrl = "http://" + adapter.config.targetIP + ":" + parseInt(adapter.config.targetHTTPPort) + "/data";
@@ -619,7 +622,11 @@ async function ebusd_ReceiveData() {
 
         adapter.log.debug("got data " + typeof buffer.data + " " + JSON.stringify(buffer.data));
 
-        const oData = buffer.data;
+        //workaround issue #338
+        //const oData = buffer.data;
+        const oData = JSON.parse(buffer.data.replace('\"updatecheck\": \"\n', '\"updatecheck\": \"'));
+
+        //adapter.log.debug("000 " + typeof oData + JSON.stringify(oData));
 
         //adapter.log.debug("oData " + oData);
 
@@ -627,8 +634,12 @@ async function ebusd_ReceiveData() {
 
         const newData = flatten(oData);
 
+        //adapter.log.debug("111 " + JSON.stringify(newData));
+
         const keys = Object.keys(newData);
 
+        //adapter.log.debug("222 " + JSON.stringify(keys));
+
         //adapter.log.debug("history: " + options.historyValues);
 
         const historyvalues = [];

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "iobroker.ebus",
-  "version": "3.3.1",
+  "version": "3.3.3",
   "description": "ioBroker ebus Adapter",
   "author": {
     "name": "René G.",
@@ -23,33 +23,33 @@
     "node": ">= 18"
   },
   "dependencies": {
-    "@iobroker/adapter-core": "^3.1.4",
-    "flat": "^5.0.2",
+    "@iobroker/adapter-core": "^3.1.6",
+    "axios": "^1.7.2",
+    "flat": "5.0.2",
     "net": "^1.0.2",
-    "promise-socket": "^7.0.0",
-    "axios": "^1.7.2"
+    "promise-socket": "7.0.0"
   },
   "devDependencies": {
-    "@alcalzone/release-script": "^3.7.0",
-    "@alcalzone/release-script-plugin-iobroker": "^3.7.0",
+    "@alcalzone/release-script": "^3.7.3",
+    "@alcalzone/release-script-plugin-iobroker": "^3.7.2",
     "@alcalzone/release-script-plugin-license": "^3.7.0",
     "@iobroker/adapter-dev": "^1.3.0",
     "@iobroker/testing": "^4.1.3",
-    "@types/chai": "^4.3.11",
+    "@types/chai": "^4.3.16",
     "@types/chai-as-promised": "^7.1.8",
     "@types/gulp": "^4.0.17",
-    "@types/mocha": "^10.0.6",
-    "@types/node": "^20.12.12",
+    "@types/mocha": "^10.0.7",
+    "@types/node": "^20.14.10",
     "@types/proxyquire": "^1.3.31",
     "@types/request-promise-native": "^1.0.21",
     "@types/sinon": "^17.0.3",
     "@types/sinon-chai": "^3.2.12",
     "axios": "^1.7.2",
     "chai": "^4.4.1",
-    "chai-as-promised": "^7.1.2",
-    "eslint": "^9.3.0",
+    "chai-as-promised": "^8.0.0",
+    "eslint": "^9.6.0",
     "gulp": "^5.0.0",
-    "mocha": "^10.4.0",
+    "mocha": "^10.6.0",
     "proxyquire": "^2.1.3",
     "sinon": "^18.0.0",
     "sinon-chai": "^3.7.0"