iobroker.arylic 0.0.2 → 0.1.0

package/README.md

@@ -26,11 +26,16 @@ this can be added as a second transport — if you own such a device and can tes
 ## Finding devices
 
 With **Find devices automatically** on, the adapter listens for AirPlay announcements (mDNS) carrying
-`manufacturer=Arylic`. The serial number is the device's object id, so a new IP address is picked up
-without any change. ioBroker must be in the same network segment; in Docker, use host networking.
+`manufacturer=Arylic`. The serial number is the device's object id; the network is asked again every
+5 minutes, so a new IP address is picked up within that time. Devices found earlier are connected
+right away after a restart. ioBroker must be in the same network segment; in Docker, use host
+networking.
 
 Devices in another subnet can be entered by IP address.
 
+Found devices are listed in the instance settings and in the admin's device manager, with their
+connection status, model, serial number and firmware.
+
 ## States
 
 Per device, below `arylic.0.<serial>`:
@@ -40,24 +45,48 @@ Per device, below `arylic.0.<serial>`:
 | `volume` | `VOL` | yes | 0–100 |
 | `maxVolume` | `MXV` | yes | 30–100, upper limit for every source; kept after a factory reset |
 | `mute` | `MUT` | yes | |
-| `source` | `SRC` | yes | one of `sources` |
-| `bass`, `mid`, `treble` | `BAS`, `MID`, `TRE` | yes | −10…10 dB |
-| `led` | `LED` | yes | |
-| `beep` | `BEP` | yes | confirmation tone |
-| `name` | `NAM` | yes | device name, also the AirPlay name |
-| `playing` | `PLA` | no | |
+| `source` | `SRC` | yes | choices from `sources` |
 | `sources` | `LST` | no | available inputs |
+| `playing` | `PLA` | no | |
+| `playPause`, `stop`, `next`, `previous` | `POP`, `STP`, `NXT`, `PRE` | button | |
 | `standby` | `SYS:STANDBY` | button | ⚠️ see below |
+| `sound.bass`, `sound.mid`, `sound.treble` | `BAS`, `MID`, `TRE` | yes | −10…10 dB |
+| `sound.balance` | `BAL` | yes | −100…100 |
+| `sound.virtualBass` | `VBS` | yes | |
+| `sound.eqEnabled`, `sound.eqPreset` | `EQE`, `EQS` | yes | choices from `sound.eqPresets` (`PEQ`) |
+| `sound.crossover`, `sound.crossoverFrequency` | `CFE`, `CFF` | yes | for a subwoofer, 50–300 Hz |
+| `settings.led` | `LED` | yes | |
+| `settings.beep` | `BEP` | yes | confirmation tone |
+| `settings.name` | `NAM` | yes | device name, also the AirPlay name |
+| `settings.muteDelay` | `DLY` | yes | seconds without signal until the output mutes |
+| `settings.powerOnSource` | `POM` | yes | input after power-on, `NONE` = last one |
+| `settings.autoSwitch` | `ASW` | yes | switch back to the previous input |
+| `settings.volumeStep` | `VST` | yes | step for volume up/down, 0–10 |
+| `settings.fixedVolume` | `VOF` | yes | fixed output level, 0 = off |
+| `settings.standbyOnPower` | `SOP` | yes | start in standby after power-up |
 | `info.connected` | | no | TCP connection to the device |
 | `info.ip` | `IPA` | no | |
+| `info.ethernet`, `info.wifi` | `ETH`, `WIF` | no | wired / wireless connection |
+| `info.multiroomChannel`, `info.multiroomMode` | `CHN`, `MRM` | no | |
 | `info.mcuVersion` | `VER` | no | amplifier chip firmware |
 | `info.model`, `info.serial`, `info.firmware` | | no | from the mDNS announcement |
 
+Not included: `PMT` and `COE` restart the device on every change; title, artist and album are not
+sent over TCP; `WWW` (internet) stayed `0` on an LA50 with internet access.
+
 A write is a command (`ack=false`). The device's answer sets the value again with `ack=true` — if it
 stays `ack=false`, the device did not accept the command.
 
 ⚠️ **Standby:** Nothing over the network wakes an LA50 from standby — the web interface is gone as
-well, and the UART API has no wake command. Only the IR remote brings it back.
+well, and the UART API has no wake command. Only the IR remote brings it back. This applies to the
+`standby` button and to `settings.standbyOnPower`, which makes the device start in standby after
+every power cut.
+
+## Development
+
+- `npm test` — unit tests and package checks
+- `npm run live` — finds devices via mDNS and reads all values, without ioBroker; nothing is written.
+  `npm run live -- 10.0.0.61` connects to one address.
 
 ## Changelog
 
@@ -65,6 +94,16 @@ well, and the UART API has no wake command. Only the IR remote brings it back.
     Placeholder for the next version (at the beginning of the line):
     ### **WORK IN PROGRESS**
 -->
+### 0.1.0 (2026-10-14)
+
+- (Timo Schneider) sound (balance, EQ, virtual bass, crossover), settings, playback buttons, network status
+- (Timo Schneider) states grouped into `sound`, `settings`, `info`; outdated states are removed — **state ids changed**
+- (Timo Schneider) choices for input and EQ preset come from the device
+- (Timo Schneider) device manager: found devices with status, details, refresh and a link to the web interface (admin 7.8.1 or newer)
+- (Timo Schneider) written values are checked: `"false"`/`"0"` count as false, numbers are limited to their range, text must not contain `;`
+- (Timo Schneider) a device that stops answering is reconnected; an address change is picked up within 5 minutes
+- (Timo Schneider) the device name comes from the device; quick button presses are no longer merged
+
 ### 0.0.2 (2026-10-13)
 
 - (Timo Schneider) published through GitHub Actions (npm trusted publishing)

package/admin/i18n/de.json

@@ -1,10 +1,11 @@
 {
-  "Find devices automatically": "Geräte automatisch finden",
   "Arylic devices announce themselves via mDNS (AirPlay). Needs ioBroker in the same network segment; in Docker use host networking.": "Arylic-Geräte melden sich per mDNS (AirPlay). ioBroker muss im selben Netzsegment sein; in Docker Host-Netzwerk verwenden.",
-  "Poll interval": "Abfrageintervall",
-  "The device reports changes on its own; the poll catches anything missed.": "Das Gerät meldet Änderungen selbst; die Abfrage fängt Verpasstes auf.",
   "Devices": "Geräte",
-  "Only needed for devices discovery cannot find, e.g. in another subnet.": "Nur nötig für Geräte, die die Suche nicht findet, z. B. in einem anderen Subnetz.",
+  "Find devices automatically": "Geräte automatisch finden",
+  "Found devices": "Gefundene Geräte",
+  "IP address": "IP-Adresse",
   "Name": "Name",
-  "IP address": "IP-Adresse"
+  "Only needed for devices discovery cannot find, e.g. in another subnet.": "Nur nötig für Geräte, die die Suche nicht findet, z. B. in einem anderen Subnetz.",
+  "Poll interval": "Abfrageintervall",
+  "The device reports changes on its own; the poll catches anything missed.": "Das Gerät meldet Änderungen selbst; die Abfrage fängt Verpasstes auf."
 }

package/admin/i18n/en.json

@@ -6,5 +6,6 @@
   "Devices": "Devices",
   "Only needed for devices discovery cannot find, e.g. in another subnet.": "Only needed for devices discovery cannot find, e.g. in another subnet.",
   "Name": "Name",
-  "IP address": "IP address"
+  "IP address": "IP address",
+  "Found devices": "Found devices"
 }

package/admin/i18n/es.json

@@ -0,0 +1,11 @@
+{
+  "Arylic devices announce themselves via mDNS (AirPlay). Needs ioBroker in the same network segment; in Docker use host networking.": "Los dispositivos acrílicos se anuncian a través de mDNS (AirPlay). Necesita ioBroker en el mismo segmento de red; en Docker utilice redes de host.",
+  "Devices": "Dispositivos",
+  "Find devices automatically": "Encuentra dispositivos automáticamente",
+  "Found devices": "Dispositivos encontrados",
+  "IP address": "dirección IP",
+  "Name": "Nombre",
+  "Only needed for devices discovery cannot find, e.g. in another subnet.": "Solo es necesario para el descubrimiento de dispositivos que no se pueden encontrar, p. en otra subred.",
+  "Poll interval": "Intervalo de encuesta",
+  "The device reports changes on its own; the poll catches anything missed.": "El dispositivo informa los cambios por sí solo; la encuesta detecta cualquier cosa que se haya perdido."
+}

package/admin/i18n/fr.json

@@ -0,0 +1,11 @@
+{
+  "Arylic devices announce themselves via mDNS (AirPlay). Needs ioBroker in the same network segment; in Docker use host networking.": "Les appareils aryliques s'annoncent via mDNS (AirPlay). Nécessite ioBroker dans le même segment de réseau ; dans Docker, utilisez le réseau hôte.",
+  "Devices": "Appareils",
+  "Find devices automatically": "Rechercher automatiquement des appareils",
+  "Found devices": "Appareils trouvés",
+  "IP address": "Adresse IP",
+  "Name": "Nom",
+  "Only needed for devices discovery cannot find, e.g. in another subnet.": "Uniquement nécessaire pour la découverte des appareils impossible à trouver, par ex. dans un autre sous-réseau.",
+  "Poll interval": "Intervalle d'interrogation",
+  "The device reports changes on its own; the poll catches anything missed.": "L'appareil signale lui-même les modifications ; le sondage détecte tout ce qui a été manqué."
+}

package/admin/i18n/it.json

@@ -0,0 +1,11 @@
+{
+  "Arylic devices announce themselves via mDNS (AirPlay). Needs ioBroker in the same network segment; in Docker use host networking.": "I dispositivi Arylic si annunciano tramite mDNS (AirPlay). Ha bisogno di ioBroker nello stesso segmento di rete; in Docker utilizza la rete host.",
+  "Devices": "Dispositivi",
+  "Find devices automatically": "Trova i dispositivi automaticamente",
+  "Found devices": "Dispositivi trovati",
+  "IP address": "Indirizzo IP",
+  "Name": "Nome",
+  "Only needed for devices discovery cannot find, e.g. in another subnet.": "Necessario solo per il rilevamento dei dispositivi che non è possibile trovare, ad es. in un'altra sottorete.",
+  "Poll interval": "Intervallo di sondaggio",
+  "The device reports changes on its own; the poll catches anything missed.": "Il dispositivo segnala autonomamente le modifiche; il sondaggio rileva tutto ciò che è mancato."
+}

package/admin/i18n/nl.json

@@ -0,0 +1,11 @@
+{
+  "Arylic devices announce themselves via mDNS (AirPlay). Needs ioBroker in the same network segment; in Docker use host networking.": "Arylic-apparaten kondigen zichzelf aan via mDNS (AirPlay). Heeft ioBroker nodig in hetzelfde netwerksegment; in Docker gebruik hostnetwerken.",
+  "Devices": "Apparaten",
+  "Find devices automatically": "Vind apparaten automatisch",
+  "Found devices": "Apparaten gevonden",
+  "IP address": "IP-adres",
+  "Name": "Naam",
+  "Only needed for devices discovery cannot find, e.g. in another subnet.": "Alleen nodig als apparaten niet kunnen worden gevonden, b.v. in een ander subnet.",
+  "Poll interval": "Poll-interval",
+  "The device reports changes on its own; the poll catches anything missed.": "Het apparaat rapporteert zelfstandig wijzigingen; de peiling belicht alles wat gemist is."
+}

package/admin/i18n/pl.json

@@ -0,0 +1,11 @@
+{
+  "Arylic devices announce themselves via mDNS (AirPlay). Needs ioBroker in the same network segment; in Docker use host networking.": "Urządzenia akrylowe ogłaszają się poprzez mDNS (AirPlay). Potrzebuje ioBroker w tym samym segmencie sieci; w Dockerze użyj sieci hostów.",
+  "Devices": "Urządzenia",
+  "Find devices automatically": "Znajdź urządzenia automatycznie",
+  "Found devices": "Znaleziono urządzenia",
+  "IP address": "Adres IP",
+  "Name": "Nazwa",
+  "Only needed for devices discovery cannot find, e.g. in another subnet.": "Potrzebne tylko do wykrywania urządzeń, których nie można znaleźć, np. w innej podsieci.",
+  "Poll interval": "Interwał ankiety",
+  "The device reports changes on its own; the poll catches anything missed.": "Urządzenie samo zgłasza zmiany; ankieta wychwytuje wszystko, co zostało pominięte."
+}

package/admin/i18n/pt.json

@@ -0,0 +1,11 @@
+{
+  "Arylic devices announce themselves via mDNS (AirPlay). Needs ioBroker in the same network segment; in Docker use host networking.": "Os dispositivos Arylic se anunciam via mDNS (AirPlay). Precisa de ioBroker no mesmo segmento de rede; no Docker, use rede host.",
+  "Devices": "Dispositivos",
+  "Find devices automatically": "Encontre dispositivos automaticamente",
+  "Found devices": "Dispositivos encontrados",
+  "IP address": "Endereço IP",
+  "Name": "Nome",
+  "Only needed for devices discovery cannot find, e.g. in another subnet.": "Necessário apenas para a descoberta de dispositivos que não podem ser encontrados, por ex. em outra sub-rede.",
+  "Poll interval": "Intervalo de pesquisa",
+  "The device reports changes on its own; the poll catches anything missed.": "O dispositivo relata alterações por conta própria; a enquete detecta tudo o que foi perdido."
+}

package/admin/i18n/ru.json

@@ -0,0 +1,11 @@
+{
+  "Arylic devices announce themselves via mDNS (AirPlay). Needs ioBroker in the same network segment; in Docker use host networking.": "Устройства Arylic объявляют о себе через mDNS (AirPlay). Требуется ioBroker в том же сегменте сети; в Docker используйте сеть хоста.",
+  "Devices": "Устройства",
+  "Find devices automatically": "Автоматический поиск устройств",
+  "Found devices": "Найденные устройства",
+  "IP address": "IP-адрес",
+  "Name": "Имя",
+  "Only needed for devices discovery cannot find, e.g. in another subnet.": "Требуется только для обнаружения устройств, которые невозможно найти, например. в другой подсети.",
+  "Poll interval": "Интервал опроса",
+  "The device reports changes on its own; the poll catches anything missed.": "Устройство сообщает об изменениях самостоятельно; опрос выявляет все пропущенное."
+}

package/admin/i18n/uk.json

@@ -0,0 +1,11 @@
+{
+  "Arylic devices announce themselves via mDNS (AirPlay). Needs ioBroker in the same network segment; in Docker use host networking.": "Пристрої Arylic повідомляють про себе через mDNS (AirPlay). Потрібен ioBroker в тому ж сегменті мережі; у Docker використовувати мережу хостів.",
+  "Devices": "Пристрої",
+  "Find devices automatically": "Автоматичний пошук пристроїв",
+  "Found devices": "Знайдені пристрої",
+  "IP address": "IP адреса",
+  "Name": "Ім'я",
+  "Only needed for devices discovery cannot find, e.g. in another subnet.": "Потрібно лише для виявлення пристроїв, які неможливо знайти, напр. в іншій підмережі.",
+  "Poll interval": "Інтервал опитування",
+  "The device reports changes on its own; the poll catches anything missed.": "Пристрій самостійно повідомляє про зміни; опитування фіксує все, що ви пропустили."
+}

package/admin/i18n/zh-cn.json

@@ -0,0 +1,11 @@
+{
+  "Arylic devices announce themselves via mDNS (AirPlay). Needs ioBroker in the same network segment; in Docker use host networking.": "Arylic 设备通过 mDNS (AirPlay) 宣布自己。需要ioBroker在同一网段；在 Docker 中使用主机网络。",
+  "Devices": "设备",
+  "Find devices automatically": "自动查找设备",
+  "Found devices": "找到设备",
+  "IP address": "IP地址",
+  "Name": "姓名",
+  "Only needed for devices discovery cannot find, e.g. in another subnet.": "仅用于发现无法找到的设备，例如在另一个子网中。",
+  "Poll interval": "轮询间隔",
+  "The device reports changes on its own; the poll catches anything missed.": "设备自行报告变化；民意调查发现了任何遗漏的东西。"
+}

package/admin/jsonConfig.json

@@ -67,6 +67,21 @@
           "validatorNoSaveOnError": true
         }
       ]
+    },
+    "foundHeader": {
+      "type": "header",
+      "text": "Found devices",
+      "size": 3,
+      "newLine": true
+    },
+    "deviceManager": {
+      "type": "deviceManager",
+      "newLine": true,
+      "xs": 12,
+      "sm": 12,
+      "md": 12,
+      "lg": 12,
+      "xl": 12
     }
   }
 }

package/io-package.json

@@ -1,8 +1,21 @@
 {
   "common": {
     "name": "arylic",
-    "version": "0.0.2",
+    "version": "0.1.0",
     "news": {
+      "0.1.0": {
+        "en": "sound (balance, EQ, virtual bass, crossover), settings, playback buttons, network status\nstates grouped into `sound`, `settings`, `info`; outdated states are removed — **state ids changed**\nchoices for input and EQ preset come from the device\ndevice manager: found devices with status, details, refresh and a link to the web interface (admin 7.8.1 or newer)\nwritten values are checked: `\"false\"`/`\"0\"` count as false, numbers are limited to their range, text must not contain `;`\na device that stops answering is reconnected; an address change is picked up within 5 minutes\nthe device name comes from the device; quick button presses are no longer merged",
+        "de": "Ton (Balance, EQ, Virtual Bass, Crossover), Einstellungen, Abspieltasten, Netzwerkstatus\nStatus gruppiert nach „Sound“, „Settings“, „Info“; veraltete Status werden entfernt — **Status-IDs geändert**\nEingabe und EQ-Preset wählen Sie vom Gerät\nGerätemanager: Geräte mit Status, Details, Refresh und Webinterface gefunden (Admin 7.8.1 oder neuer)\nWerte werden geprüft: `\"false\"`/`\"0\"` gelten als falsch, Zahlen sind begrenzt, Text darf nicht `;`\nGerät, das nicht mehr reagiert, wird neu verbunden; Adressänderung innerhalb von 5 Minuten\nDer Gerätename stammt vom Gerät; Schnelltasten sind nicht mehr vereint",
+        "ru": "звук (баланс, эквалайзер, виртуальный бас, кроссовер), настройки, кнопки воспроизведения, состояние сети\nсостояния сгруппированы в `sound`, `settings`, `info`; устаревшие состояния удалены — **изменено состояние**\nварианты ввода и предустановки эквалайзера поступают от устройства\nдиспетчер устройств: найденные устройства со статусом, сведениями, обновлением и ссылкой на веб-интерфейс (admin 7.8.1 или новее)\nпроверяются записанные значения: `\"false\"`/`\"0\"` считаются ложными, числа ограничены своим диапазоном, текст не должен содержать `;`\nустройство, которое перестает отвечать, снова подключается; изменение адреса происходит в течение 5 минут\nимя устройства взято из названия устройства; быстрые нажатия кнопок больше не объединяются",
+        "pt": "som (balanço, EQ, baixo virtual, crossover), ajustes, botões de reprodução, status da rede\nestados agrupados em `sound`, `settings`, `info`; estados antigos são removidos — **state ids**\nas opções de entrada e EQ vêm do dispositivo\ngerenciador de dispositivos com status, detalhes, atualização e link para a web (admin 7.8.1 ou superior)\nvalores escritos são verificados: `\"false\"`/`\"0\"`, números limitados, texto não deve conter `;`\num dispositivo que para de atender é reconectado; a mudança de endereço ocorre em 5 minutos\no nome do dispositivo vem do dispositivo; botões rápidos não são mais mesclados",
+        "nl": "geluid (balans, equalizer, virtuele bas, crossover), instellingen, afspeelknoppen, netwerkstatus\ntoestanden gegroepeerd in `sound`, `instellingen`, `info`; verouderde statussen worden verwijderd — **stat-id's veranderd**\nde keuzes voor invoer en EQ-voorinstelling zijn afkomstig van het apparaat\napparaatbeheerder: apparaten gevonden met status, gegevens, vernieuwing en een link naar de webinterface (admin 7.8.1 of nieuwer)\ngeschreven waarden worden gecontroleerd: `\"false\"`/`\"0\"` tellen als onwaar, getallen zijn beperkt tot hun bereik, tekst mag geen `;` bevatten\neen apparaat dat niet meer antwoordt, wordt opnieuw verbonden; een adreswijziging wordt binnen 5 minuten verwerkt\nde naam van het apparaat is afkomstig van het apparaat; snelle toetsaanslagen worden niet langer samengevoegd",
+        "fr": "son (balance, EQ, Virtual Bass, Crossover), réglages, boutons de lecture, état du réseau\nétats regroupés en « sound », « settings », « info » ; les états obsolètes sont supprimés — **l'état est modifié**\nles choix d'entrée et d'égalisation viennent de l'appareil\ngestionnaire d'appareils : appareils trouvés avec état, détails, actualisation et lien vers l'interface Web (admin 7.8.1 ou version ultérieure)\nles valeurs écrites sont vérifiées : « false\"`/`\"0\"` compte comme faux, les chiffres sont limités, le texte ne doit pas en contenir `;`\nun appareil qui ne répond plus est reconnecté ; un changement d'adresse est pris en 5 minutes\nle nom de l'appareil vient de l'appareil ; les pressions rapides ne sont plus fusionnées",
+        "it": "suono (balance, EQ, virtual bass, crossover), impostazioni, tasti, stato della rete\nstati raggruppati in «sound», «settings», «info»; rimossi — **state id modificati**\ninput e preset EQ sono a scelta del dispositivo\ngestore dispositivi: trovati con stato, dettagli, aggiornamento e link al web (admin 7.8.1 o successivo)\ni valori scritti sono controllati: `\"false\"`/\"0\"` sono falsi, i numeri sono limitati, il testo non deve contenere `;`\nun dispositivo che non risponde si ricollega; cambia indirizzo entro 5 minuti\nil nome del dispositivo deriva dal dispositivo; i tasti premuti non sono più uniti",
+        "es": "sonido (balance, ecualizador, bajo virtual, cruce), ajustes, botones de reproducción, estado de la red\nestados agrupados en «sonido», «configuración», «información»; se eliminan los estados anticuados — **ID de estado cambiado**\nlas opciones de entrada y ecualización vienen del dispositivo\ngestor de dispositivos: encontró dispositivos con estado, detalles, actualización y enlace a la interfaz web (admin 7.8.1 o posterior)\nse comprueban los valores escritos: `\"falso\"`/`\"0\"` cuentan como falsos, los números se limitan a su rango, el texto no debe contener `;`\nse vuelve a conectar un dispositivo que deja de responder; un cambio de dirección se recoge en 5 minutos\nel nombre del dispositivo viene del dispositivo; los botones rápidos ya no se combinan",
+        "pl": "dźwięk (balans, korektor, wirtualny bas, crossover), ustawienia, przyciski odtwarzania, stan sieci\nstany pogrupowane w „dźwięk”, „ustawienia”, „info”; stany przestarzałe są usuwane — **zmieniono identyfikatory stanów**\nopcje wejścia i ustawienia EQ pochodzą z urządzenia\nmenedżer urządzeń: znalezione urządzenia ze statusem, szczegółami, odświeżeniem i łączem do interfejsu internetowego (admin 7.8.1 lub nowszy)\nwartości zapisane są sprawdzane: „fałszy\"`/`\"0\"` liczą się jako fałszywe, liczby są ograniczone do ich zakresu, tekst nie może zawierać `;”\nurządzenie, które przestaje odpowiadać, zostaje ponownie podłączone; zmiana adresu zostaje odebrana w ciągu 5 minut\nnazwa urządzenia pochodzi od urządzenia; szybkie naciśnięcia przycisków nie są już łączone",
+        "uk": "звук (баланс, еквалайзер, віртуальний бас, кросовер), налаштування, кнопки відтворення, стан мережі\nстани, згруповані в `звук`, `налаштування`, `info`; застарілі стани видаляються — ** ідентифікатори станів зміненили**\nвибір для введення та налаштування еквалайзера надходить від пристрою\nдиспетчер пристроїв: знайдені пристрої зі статусом, деталями, оновленням і посиланням на веб-інтерфейс (admin 7.8.1 або новіше)\nЗаписані значення перевіряються: `\"false\"`/`\"0\"` вважаються false, числа обмежені своїм діапазоном, текст не повинен містити `;`\nпристрій, який перестає відповідати, знову підключається; зміна адреси приймається протягом 5 хвилин\nназва пристрою походить від пристрою; швидкі натискання кнопок більше не об'єднуються",
+        "zh-cn": "声音（平衡、EQ、虚拟低音、分频器）、设置、播放按钮、网络状态\n状态分组为 “声音”、“设置”、“信息”；过期状态被移除 — **状态 ID 已更改**\n输入和 EQ 预设的选择来自设备\n设备管理器：已找到具有状态、详细信息、刷新和 Web 界面链接的设备（管理员 7.8.1 或更高版本）\n检查书面值：``false \"`/\" \"0\"`算作假，数字仅限于其范围，文本不得包含 `;\n停止应答的设备将重新连接；在 5 分钟内收到地址变更信息\n设备名称来自设备；快速按下按钮不再合并"
+      },
       "0.0.2": {
         "en": "published through GitHub Actions (npm trusted publishing)",
         "de": "veröffentlicht über GitHub Actions (npm trusted publishing)",
@@ -91,9 +104,12 @@
     ],
     "globalDependencies": [
       {
-        "admin": ">=7.4.10"
+        "admin": ">=7.8.1"
       }
-    ]
+    ],
+    "supportedMessages": {
+      "deviceManager": true
+    }
   },
   "native": {
     "discovery": true,

package/lib/device-management.js

@@ -0,0 +1,90 @@
+'use strict';
+
+const { DeviceManagement } = require('@iobroker/dm-utils');
+
+// Shown below an expanded device, live from its states.
+const DETAILS = [
+    ['IP address', 'info.ip'],
+    ['Model', 'info.model'],
+    ['Serial number', 'info.serial'],
+    ['Firmware', 'info.firmware'],
+    ['Amplifier chip', 'info.mcuVersion'],
+    ['Input', 'source'],
+    ['Volume', 'volume'],
+    ['Maximum volume', 'maxVolume'],
+];
+
+const ICON =
+    'data:image/svg+xml;base64,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';
+
+/**
+ * Lists the amplifiers in the admin's device manager: connection status,
+ * address, and details such as model, serial number and firmware.
+ */
+class ArylicDeviceManagement extends DeviceManagement {
+    /**
+     * @returns {import('@iobroker/dm-utils').InstanceDetails} instance information
+     */
+    getInstanceInfo() {
+        return {
+            ...super.getInstanceInfo(),
+            identifierLabel: { en: 'IP address', de: 'IP-Adresse' },
+        };
+    }
+
+    /**
+     * @param {import('@iobroker/dm-utils').DeviceLoadContext<string>} context collects the devices
+     */
+    loadDevices(context) {
+        const devices = [...this.adapter.devices.values()];
+        context.setTotalDevices(devices.length);
+        for (const device of devices) {
+            context.addDevice({
+                id: device.id,
+                identifier: device.host,
+                name: device.name,
+                icon: ICON,
+                manufacturer: 'Arylic',
+                model: device.info.model,
+                status: {
+                    connection: {
+                        stateId: `${this.adapter.namespace}.${device.id}.info.connected`,
+                        mapping: { true: 'connected', false: 'disconnected' },
+                    },
+                },
+                hasDetails: true,
+                actions: [
+                    {
+                        id: 'refresh',
+                        icon: 'refresh',
+                        description: { en: 'Read all values now', de: 'Alle Werte jetzt lesen' },
+                        handler: () => {
+                            device.refresh();
+                            return { refresh: 'none' };
+                        },
+                    },
+                    {
+                        id: 'web',
+                        icon: 'web',
+                        description: { en: 'Open the web interface', de: 'Weboberfläche öffnen' },
+                        url: `http://${device.host}`,
+                    },
+                ],
+            });
+        }
+    }
+
+    /**
+     * @param {string} id device id
+     * @returns {import('@iobroker/dm-utils').DeviceDetails<string>} details shown below the device
+     */
+    getDeviceDetails(id) {
+        const items = {};
+        DETAILS.forEach(([label, stateId], i) => {
+            items[`row${i}`] = { type: 'state', oid: `${id}.${stateId}`, label, control: 'text', sm: 12 };
+        });
+        return { id, schema: { type: 'panel', items } };
+    }
+}
+
+module.exports = { ArylicDeviceManagement };