iobroker.alias-workbench 0.8.0

package/admin/vorlagen/hm-schaltaktor-mehrfach.json

@@ -0,0 +1,203 @@
+{
+  "id": "hm-schaltaktor-mehrfach",
+  "version": 4,
+  "rang": 30,
+  "name": {
+    "de": "Homematic Schaltaktor mit mehreren Ausgängen",
+    "en": "Homematic switch actuator, multiple outputs"
+  },
+  "geraetetyp": "light",
+  "funktion": "socket",
+  "hinweis": {
+    "de": "Zweifach-Unterputzaktor wie HM-LC-Sw2PBU-FM. Je Ausgang entsteht ein eigenes Gerät, weil ein light genau ein SET hat — dieselbe Regel wie bei der Tasmota-Steckdosenleiste. %N% ist die Kanalnummer und wird aus den vorhandenen Objekten gelesen. Der Zielname trägt zunächst nur die Nummer; wenn die Kanäle im Objektbrowser eigene Namen haben (Bar, Esstisch), gehören die in die Zielzeile.",
+    "en": "Two-gang flush-mounted actuator such as HM-LC-Sw2PBU-FM. One device per output, because a light has exactly one SET. %N% is the channel number, read from the objects that exist."
+  },
+  "mehrfach": {
+    "platzhalter": "%N%"
+  },
+  "kanalname": "%N%",
+  "erkennung": {
+    "erforderlich": [
+      "%N%.STATE",
+      "%N%.WORKING",
+      "2.STATE"
+    ],
+    "verboten": [
+      "1.SET_POINT_TEMPERATURE"
+    ],
+    "hinweis": "2.STATE steht fest in der Liste, damit die Vorlage nicht auch am Einfach-Aktor greift - der hat nur Kanal 1 und gehoert zur Einfach-Vorlage. %N%.WORKING trennt die Schaltkanaele von allem anderen, was zufaellig STATE heisst: die Heizgruppe HmIP-HEATING hat einen schaltbaren 6.STATE, aber kein 6.WORKING, und der Fensterkontakt hat weder das eine noch das andere. Das verbotene SET_POINT_TEMPERATURE haelt zusaetzlich alle Thermostate fern."
+  },
+  "zustaende": [
+    {
+      "name": "SET",
+      "rolle": "switch.light",
+      "typ": "boolean",
+      "lesen": "%N%.STATE",
+      "schreiben": "%N%.STATE"
+    },
+    {
+      "name": "ON_ACTUAL",
+      "rolle": "sensor.light",
+      "typ": "boolean",
+      "lesen": "%N%.STATE",
+      "optional": true,
+      "hinweis": "Liest dieselbe Quelle wie SET - der Aktor meldet keinen getrennten Istwert, 1.STATE ist beides. Deshalb standardmaessig aus: angehakt stuende derselbe Wert zweimal im Alias, und die Pruefung „kein Punkt doppelt\" meldet es zu Recht. Anhaken nur, wenn ein Widget ausdruecklich einen eigenen Rueckmeldepunkt erwartet.",
+      "vorgabeAus": true
+    },
+    {
+      "name": "WORKING",
+      "rolle": "indicator.working",
+      "typ": "boolean",
+      "lesen": "%N%.WORKING",
+      "optional": true,
+      "hinweis": "Gehoert zum einzelnen Ausgang, nicht zum Geraet - jeder Ausgang bekommt sein eigenes."
+    },
+    {
+      "name": "ON_TIME",
+      "rolle": "level.timer",
+      "typ": "number",
+      "einheit": "s",
+      "lesen": "%N%.ON_TIME",
+      "schreiben": "%N%.ON_TIME",
+      "optional": true,
+      "vorgabeAus": true,
+      "hinweis": "Einschaltdauer in Sekunden. Vor dem Einschalten gesetzt, schaltet der Ausgang danach von allein wieder aus. Das light-Muster hat dafuer keinen Platz - angehakt landet der Punkt im info-Geraet."
+    },
+    {
+      "name": "INHIBIT",
+      "rolle": "switch",
+      "typ": "boolean",
+      "lesen": "%N%.INHIBIT",
+      "schreiben": "%N%.INHIBIT",
+      "optional": true,
+      "vorgabeAus": true,
+      "hinweis": "Sperrt diesen Ausgang. Solange true, nimmt er keine Befehle an - auch nicht vom Taster."
+    },
+    {
+      "name": "LOWBAT",
+      "rolle": "indicator.lowbat",
+      "typ": "boolean",
+      "lesen": "0.LOWBAT",
+      "lesenSonst": {
+        "punkt": "0.LOW_BAT"
+      },
+      "optional": true,
+      "hinweis": "Kanal 0 gilt fuer das ganze Geraet. Beide Ausgaenge bekommen denselben Punkt - die Meldung betrifft ja beide."
+    },
+    {
+      "name": "UNREACH",
+      "rolle": "indicator.maintenance.unreach",
+      "typ": "boolean",
+      "lesen": "0.UNREACH",
+      "optional": true,
+      "hinweis": "Kanal 0, gilt fuer beide Ausgaenge."
+    },
+    {
+      "name": "RSSI",
+      "rolle": "value.rssi",
+      "typ": "number",
+      "einheit": "dBm",
+      "lesen": "0.RSSI_DEVICE",
+      "optional": true,
+      "vorgabeAus": true,
+      "lesenSonst": {
+        "punkt": "0.RSSI_PEER"
+      },
+      "hinweis": "RSSI_DEVICE steht zuerst: es ist der Pegel, den die Zentrale vom Geraet empfaengt. RSSI_PEER ist bei Batteriegeraeten oft unbelegt und traegt dann Grenzwerte wie -2147483648."
+    }
+  ],
+  "weiterePunkte": {
+    "*.ACTIVE_PROFILE": "level.mode",
+    "*.ACTUAL_TEMPERATURE": "value.temperature",
+    "*.ACTUAL_TEMPERATURE_STATUS": "value",
+    "*.BOOST_MODE": "switch.mode.boost",
+    "*.BOOST_TIME": "value.interval",
+    "*.BOOTED": "indicator",
+    "*.CARRIER_SENSE_LEVEL": "value",
+    "*.CONFIG_PENDING": "indicator.maintenance",
+    "*.CONFIG_PENDING_ALARM": "indicator.maintenance",
+    "*.CONTROL_DIFFERENTIAL_TEMPERATURE": "level.temperature",
+    "*.CONTROL_MODE": "level.mode.thermostat",
+    "*.DEVICE_IN_BOOTLOADER": "indicator.maintenance",
+    "*.DEVICE_IN_BOOTLOADER_ALARM": "indicator.maintenance",
+    "*.DEW_POINT_ALARM": "indicator.error",
+    "*.DIRECTION": "indicator.direction",
+    "*.DURATION_UNIT": "value",
+    "*.DURATION_VALUE": "value",
+    "*.DUTYCYCLE": "indicator.maintenance",
+    "*.DUTYCYCLE_ALARM": "indicator.maintenance",
+    "*.DUTY_CYCLE": "indicator.maintenance",
+    "*.DUTY_CYCLE_LEVEL": "value",
+    "*.EMERGENCY_OPERATION": "indicator.maintenance",
+    "*.EMERGENCY_OPERATION_ALARM": "indicator.maintenance",
+    "*.ERROR": "indicator.error",
+    "*.ERROR-1_ALARM": "indicator.error",
+    "*.ERROR-2_ALARM": "indicator.error",
+    "*.ERROR-3_ALARM": "indicator.error",
+    "*.ERROR-4_ALARM": "indicator.error",
+    "*.ERROR-5_ALARM": "indicator.error",
+    "*.ERROR-6_ALARM": "indicator.error",
+    "*.ERROR-7_ALARM": "indicator.error",
+    "*.ERROR_CODE": "value",
+    "*.ERROR_OVERHEAT": "indicator.error",
+    "*.ERROR_OVERHEAT_ALARM": "indicator.error",
+    "*.ERROR_OVERLOAD": "indicator.error",
+    "*.ERROR_OVERLOAD_ALARM": "indicator.error",
+    "*.ERROR_REDUCED": "indicator.error",
+    "*.ERROR_REDUCED_ALARM": "indicator.error",
+    "*.FROST_PROTECTION": "indicator",
+    "*.HEATING_COOLING": "level.mode",
+    "*.HUMIDITY": "value.humidity",
+    "*.HUMIDITY_STATUS": "value",
+    "*.INCLUSION_UNSUPPORTED_DEVICE": "indicator.maintenance",
+    "*.INHIBIT": "switch",
+    "*.INSTALL_MODE": "indicator",
+    "*.INSTALL_TEST": "indicator",
+    "*.LEVEL": "level",
+    "*.LEVEL_REAL": "value",
+    "*.LEVEL_STATUS": "value",
+    "*.LOWBAT": "indicator.lowbat",
+    "*.LOWBAT_ALARM": "indicator.lowbat",
+    "*.LOW_BAT": "indicator.lowbat",
+    "*.LOW_BAT_ALARM": "indicator.lowbat",
+    "*.OLD_LEVEL": "button",
+    "*.ON_TIME": "value.interval",
+    "*.OPERATING_VOLTAGE": "value.voltage",
+    "*.OPERATING_VOLTAGE_STATUS": "value",
+    "*.PARTY_MODE": "switch.mode.party",
+    "*.PARTY_SET_POINT_TEMPERATURE": "level.temperature",
+    "*.PARTY_TIME_END": "date.end",
+    "*.PARTY_TIME_START": "date.start",
+    "*.PRESS_LONG": "button.long",
+    "*.PRESS_SHORT": "button",
+    "*.PROCESS": "value",
+    "*.QUICK_VETO_TIME": "value.interval",
+    "*.RAMP_STOP": "button.stop",
+    "*.RAMP_TIME": "value.interval",
+    "*.RSSI_DEVICE": "value.rssi",
+    "*.RSSI_PEER": "value.rssi",
+    "*.SABOTAGE": "indicator.alarm",
+    "*.SABOTAGE_ALARM": "indicator.alarm",
+    "*.SECTION": "value",
+    "*.SECTION_STATUS": "value",
+    "*.SET_POINT_MODE": "level.mode.thermostat",
+    "*.SET_POINT_TEMPERATURE": "level.temperature",
+    "*.STICKY_UNREACH": "indicator.maintenance.unreach",
+    "*.STICKY_UNREACH_ALARM": "indicator.maintenance.unreach",
+    "*.STOP": "button.stop",
+    "*.SWITCH_POINT_OCCURED": "indicator",
+    "*.TEMPERATURE": "value.temperature",
+    "*.UNREACH": "indicator.maintenance.unreach",
+    "*.UNREACH_ALARM": "indicator.maintenance.unreach",
+    "*.UPDATE_PENDING": "indicator.maintenance",
+    "*.UPDATE_PENDING_ALARM": "indicator.maintenance",
+    "*.VALVE_ADAPTION": "indicator.maintenance",
+    "*.VALVE_STATE": "value.valve",
+    "*.VALVE_STATE_ADJUSTMENT_TOO_BIG": "indicator.error",
+    "*.VALVE_STATE_ADJUSTMENT_TOO_SMALL": "indicator.error",
+    "*.VALVE_STATE_ERROR_POSITION": "indicator.error",
+    "*.VALVE_STATE_TOO_TIGHT": "indicator.error",
+    "*.WINDOW_STATE": "value.window",
+    "*.WORKING": "indicator.working"
+  }
+}

package/admin/vorlagen/hm-schaltaktor-steckdose.json

@@ -0,0 +1,197 @@
+{
+  "id": "hm-schaltaktor-steckdose",
+  "version": 3,
+  "rang": 10,
+  "name": {
+    "de": "Homematic Schaltaktor als Steckdose",
+    "en": "Homematic switch actuator as socket"
+  },
+  "geraetetyp": "socket",
+  "funktion": "socket",
+  "hinweis": {
+    "de": "Ein Ausgang, der etwas Eingestecktes schaltet. Gleiche Punkte wie die Lampen-Fassung, nur socket statt light. Steht bewusst unter der Lampe: beim Unterputz-Aktor ist Licht der Regelfall.",
+    "en": "Single output driving a plugged-in load. Same points as the light variant, socket instead of light."
+  },
+  "erkennung": {
+    "erforderlich": [
+      "1.STATE",
+      "1.WORKING"
+    ],
+    "verboten": [
+      "2.STATE"
+    ],
+    "namenshinweis": "steckdose|dose|stecker|plug|socket|pumpe|luefter",
+    "hinweis": "1.WORKING steht mit in der Pflicht: es trennt den Schaltaktor vom Fensterkontakt, der ebenfalls einen 1.STATE hat, aber nichts zu schalten. 2.STATE ist verboten, sonst wuerde diese Vorlage auch am Zweifach-Aktor greifen und dessen zweiten Ausgang stillschweigend unterschlagen."
+  },
+  "zustaende": [
+    {
+      "name": "SET",
+      "rolle": "switch",
+      "typ": "boolean",
+      "lesen": "1.STATE",
+      "schreiben": "1.STATE"
+    },
+    {
+      "name": "ACTUAL",
+      "rolle": "sensor.switch",
+      "typ": "boolean",
+      "lesen": "1.STATE",
+      "optional": true,
+      "vorgabeAus": true,
+      "hinweis": "Liest dieselbe Quelle wie SET - der Aktor meldet keinen getrennten Istwert, 1.STATE ist beides. Deshalb standardmaessig aus: angehakt stuende derselbe Wert zweimal im Alias, und die Pruefung „kein Punkt doppelt\" meldet es zu Recht. Anhaken nur, wenn ein Widget ausdruecklich einen eigenen Rueckmeldepunkt erwartet."
+    },
+    {
+      "name": "WORKING",
+      "rolle": "indicator.working",
+      "typ": "boolean",
+      "lesen": "1.WORKING",
+      "optional": true,
+      "hinweis": "Steht auf true, solange der Aktor den Befehl noch ausfuehrt."
+    },
+    {
+      "name": "ON_TIME",
+      "rolle": "level.timer",
+      "typ": "number",
+      "einheit": "s",
+      "lesen": "1.ON_TIME",
+      "schreiben": "1.ON_TIME",
+      "optional": true,
+      "vorgabeAus": true,
+      "hinweis": "Einschaltdauer in Sekunden. Vor dem Einschalten gesetzt, schaltet der Aktor danach von allein wieder aus. Das socket-Muster hat dafuer keinen Platz — angehakt landet der Punkt im info-Geraet."
+    },
+    {
+      "name": "INHIBIT",
+      "rolle": "switch",
+      "typ": "boolean",
+      "lesen": "1.INHIBIT",
+      "schreiben": "1.INHIBIT",
+      "optional": true,
+      "vorgabeAus": true,
+      "hinweis": "Sperrt den Aktor. Solange true, nimmt er keine Befehle an — auch nicht vom Taster."
+    },
+    {
+      "name": "LOWBAT",
+      "rolle": "indicator.lowbat",
+      "typ": "boolean",
+      "lesen": "0.LOWBAT",
+      "lesenSonst": {
+        "punkt": "0.LOW_BAT"
+      },
+      "optional": true
+    },
+    {
+      "name": "UNREACH",
+      "rolle": "indicator.maintenance.unreach",
+      "typ": "boolean",
+      "lesen": "0.UNREACH",
+      "optional": true
+    },
+    {
+      "name": "RSSI",
+      "rolle": "value.rssi",
+      "typ": "number",
+      "einheit": "dBm",
+      "lesen": "0.RSSI_DEVICE",
+      "optional": true,
+      "vorgabeAus": true,
+      "lesenSonst": {
+        "punkt": "0.RSSI_PEER"
+      },
+      "hinweis": "RSSI_DEVICE steht zuerst: es ist der Pegel, den die Zentrale vom Geraet empfaengt. RSSI_PEER ist bei Batteriegeraeten oft unbelegt und traegt dann Grenzwerte wie -2147483648."
+    }
+  ],
+  "weiterePunkte": {
+    "*.ACTIVE_PROFILE": "level.mode",
+    "*.ACTUAL_TEMPERATURE": "value.temperature",
+    "*.ACTUAL_TEMPERATURE_STATUS": "value",
+    "*.BOOST_MODE": "switch.mode.boost",
+    "*.BOOST_TIME": "value.interval",
+    "*.BOOTED": "indicator",
+    "*.CARRIER_SENSE_LEVEL": "value",
+    "*.CONFIG_PENDING": "indicator.maintenance",
+    "*.CONFIG_PENDING_ALARM": "indicator.maintenance",
+    "*.CONTROL_DIFFERENTIAL_TEMPERATURE": "level.temperature",
+    "*.CONTROL_MODE": "level.mode.thermostat",
+    "*.DEVICE_IN_BOOTLOADER": "indicator.maintenance",
+    "*.DEVICE_IN_BOOTLOADER_ALARM": "indicator.maintenance",
+    "*.DEW_POINT_ALARM": "indicator.error",
+    "*.DIRECTION": "indicator.direction",
+    "*.DURATION_UNIT": "value",
+    "*.DURATION_VALUE": "value",
+    "*.DUTYCYCLE": "indicator.maintenance",
+    "*.DUTYCYCLE_ALARM": "indicator.maintenance",
+    "*.DUTY_CYCLE": "indicator.maintenance",
+    "*.DUTY_CYCLE_LEVEL": "value",
+    "*.EMERGENCY_OPERATION": "indicator.maintenance",
+    "*.EMERGENCY_OPERATION_ALARM": "indicator.maintenance",
+    "*.ERROR": "indicator.error",
+    "*.ERROR-1_ALARM": "indicator.error",
+    "*.ERROR-2_ALARM": "indicator.error",
+    "*.ERROR-3_ALARM": "indicator.error",
+    "*.ERROR-4_ALARM": "indicator.error",
+    "*.ERROR-5_ALARM": "indicator.error",
+    "*.ERROR-6_ALARM": "indicator.error",
+    "*.ERROR-7_ALARM": "indicator.error",
+    "*.ERROR_CODE": "value",
+    "*.ERROR_OVERHEAT": "indicator.error",
+    "*.ERROR_OVERHEAT_ALARM": "indicator.error",
+    "*.ERROR_OVERLOAD": "indicator.error",
+    "*.ERROR_OVERLOAD_ALARM": "indicator.error",
+    "*.ERROR_REDUCED": "indicator.error",
+    "*.ERROR_REDUCED_ALARM": "indicator.error",
+    "*.FROST_PROTECTION": "indicator",
+    "*.HEATING_COOLING": "level.mode",
+    "*.HUMIDITY": "value.humidity",
+    "*.HUMIDITY_STATUS": "value",
+    "*.INCLUSION_UNSUPPORTED_DEVICE": "indicator.maintenance",
+    "*.INHIBIT": "switch",
+    "*.INSTALL_MODE": "indicator",
+    "*.INSTALL_TEST": "indicator",
+    "*.LEVEL": "level",
+    "*.LEVEL_REAL": "value",
+    "*.LEVEL_STATUS": "value",
+    "*.LOWBAT": "indicator.lowbat",
+    "*.LOWBAT_ALARM": "indicator.lowbat",
+    "*.LOW_BAT": "indicator.lowbat",
+    "*.LOW_BAT_ALARM": "indicator.lowbat",
+    "*.OLD_LEVEL": "button",
+    "*.ON_TIME": "value.interval",
+    "*.OPERATING_VOLTAGE": "value.voltage",
+    "*.OPERATING_VOLTAGE_STATUS": "value",
+    "*.PARTY_MODE": "switch.mode.party",
+    "*.PARTY_SET_POINT_TEMPERATURE": "level.temperature",
+    "*.PARTY_TIME_END": "date.end",
+    "*.PARTY_TIME_START": "date.start",
+    "*.PRESS_LONG": "button.long",
+    "*.PRESS_SHORT": "button",
+    "*.PROCESS": "value",
+    "*.QUICK_VETO_TIME": "value.interval",
+    "*.RAMP_STOP": "button.stop",
+    "*.RAMP_TIME": "value.interval",
+    "*.RSSI_DEVICE": "value.rssi",
+    "*.RSSI_PEER": "value.rssi",
+    "*.SABOTAGE": "indicator.alarm",
+    "*.SABOTAGE_ALARM": "indicator.alarm",
+    "*.SECTION": "value",
+    "*.SECTION_STATUS": "value",
+    "*.SET_POINT_MODE": "level.mode.thermostat",
+    "*.SET_POINT_TEMPERATURE": "level.temperature",
+    "*.STICKY_UNREACH": "indicator.maintenance.unreach",
+    "*.STICKY_UNREACH_ALARM": "indicator.maintenance.unreach",
+    "*.STOP": "button.stop",
+    "*.SWITCH_POINT_OCCURED": "indicator",
+    "*.TEMPERATURE": "value.temperature",
+    "*.UNREACH": "indicator.maintenance.unreach",
+    "*.UNREACH_ALARM": "indicator.maintenance.unreach",
+    "*.UPDATE_PENDING": "indicator.maintenance",
+    "*.UPDATE_PENDING_ALARM": "indicator.maintenance",
+    "*.VALVE_ADAPTION": "indicator.maintenance",
+    "*.VALVE_STATE": "value.valve",
+    "*.VALVE_STATE_ADJUSTMENT_TOO_BIG": "indicator.error",
+    "*.VALVE_STATE_ADJUSTMENT_TOO_SMALL": "indicator.error",
+    "*.VALVE_STATE_ERROR_POSITION": "indicator.error",
+    "*.VALVE_STATE_TOO_TIGHT": "indicator.error",
+    "*.WINDOW_STATE": "value.window",
+    "*.WORKING": "indicator.working"
+  }
+}

package/admin/vorlagen/hm-temperatur-feuchte.json

@@ -0,0 +1,166 @@
+{
+  "id": "hm-temperatur-feuchte",
+  "version": 2,
+  "rang": 40,
+  "name": {
+    "de": "Homematic Temperatur- und Feuchtefühler",
+    "en": "Homematic temperature and humidity sensor"
+  },
+  "geraetetyp": "temperature",
+  "funktion": "temperature_sensor",
+  "hinweis": {
+    "de": "HM-WDS40-TH-I und Verwandte. Reiner Fühler ohne Stellglied — im temperature-Muster ist die Temperatur der Hauptwert und die Feuchte steht daneben.",
+    "en": "HM-WDS40-TH-I and relatives. A plain sensor with nothing to actuate; in the temperature pattern temperature is the main value and humidity sits alongside."
+  },
+  "erkennung": {
+    "erforderlich": [
+      "1.TEMPERATURE",
+      "1.HUMIDITY"
+    ],
+    "verboten": [
+      "1.SET_POINT_TEMPERATURE",
+      "1.ACTUAL_TEMPERATURE"
+    ],
+    "hinweis": "Die Thermostate messen ebenfalls Temperatur und Feuchte, heissen ihre Punkte aber ACTUAL_TEMPERATURE und haben einen Sollwert. Beides ist hier verboten, sonst wuerde diese Vorlage ihnen den Rang ablaufen und das Stellglied unter den Tisch fallen."
+  },
+  "zustaende": [
+    {
+      "name": "ACTUAL",
+      "rolle": "value.temperature",
+      "typ": "number",
+      "einheit": "°C",
+      "lesen": "1.TEMPERATURE"
+    },
+    {
+      "name": "HUMIDITY",
+      "rolle": "value.humidity",
+      "typ": "number",
+      "einheit": "%",
+      "lesen": "1.HUMIDITY"
+    },
+    {
+      "name": "LOWBAT",
+      "rolle": "indicator.lowbat",
+      "typ": "boolean",
+      "lesen": "0.LOWBAT",
+      "lesenSonst": {
+        "punkt": "0.LOW_BAT"
+      },
+      "optional": true
+    },
+    {
+      "name": "UNREACH",
+      "rolle": "indicator.maintenance.unreach",
+      "typ": "boolean",
+      "lesen": "0.UNREACH",
+      "optional": true
+    },
+    {
+      "name": "RSSI",
+      "rolle": "value.rssi",
+      "typ": "number",
+      "einheit": "dBm",
+      "lesen": "0.RSSI_DEVICE",
+      "lesenSonst": {
+        "punkt": "0.RSSI_PEER"
+      },
+      "optional": true,
+      "vorgabeAus": true,
+      "hinweis": "RSSI_DEVICE steht zuerst: es ist der Pegel, den die Zentrale vom Geraet empfaengt. RSSI_PEER ist bei Batteriegeraeten oft unbelegt und traegt dann Grenzwerte wie -2147483648."
+    }
+  ],
+  "weiterePunkte": {
+    "*.ACTIVE_PROFILE": "level.mode",
+    "*.ACTUAL_TEMPERATURE": "value.temperature",
+    "*.ACTUAL_TEMPERATURE_STATUS": "value",
+    "*.BOOST_MODE": "switch.mode.boost",
+    "*.BOOST_TIME": "value.interval",
+    "*.BOOTED": "indicator",
+    "*.CARRIER_SENSE_LEVEL": "value",
+    "*.CONFIG_PENDING": "indicator.maintenance",
+    "*.CONFIG_PENDING_ALARM": "indicator.maintenance",
+    "*.CONTROL_DIFFERENTIAL_TEMPERATURE": "level.temperature",
+    "*.CONTROL_MODE": "level.mode.thermostat",
+    "*.DEVICE_IN_BOOTLOADER": "indicator.maintenance",
+    "*.DEVICE_IN_BOOTLOADER_ALARM": "indicator.maintenance",
+    "*.DEW_POINT_ALARM": "indicator.error",
+    "*.DIRECTION": "indicator.direction",
+    "*.DURATION_UNIT": "value",
+    "*.DURATION_VALUE": "value",
+    "*.DUTYCYCLE": "indicator.maintenance",
+    "*.DUTYCYCLE_ALARM": "indicator.maintenance",
+    "*.DUTY_CYCLE": "indicator.maintenance",
+    "*.DUTY_CYCLE_LEVEL": "value",
+    "*.EMERGENCY_OPERATION": "indicator.maintenance",
+    "*.EMERGENCY_OPERATION_ALARM": "indicator.maintenance",
+    "*.ERROR": "indicator.error",
+    "*.ERROR-1_ALARM": "indicator.error",
+    "*.ERROR-2_ALARM": "indicator.error",
+    "*.ERROR-3_ALARM": "indicator.error",
+    "*.ERROR-4_ALARM": "indicator.error",
+    "*.ERROR-5_ALARM": "indicator.error",
+    "*.ERROR-6_ALARM": "indicator.error",
+    "*.ERROR-7_ALARM": "indicator.error",
+    "*.ERROR_CODE": "value",
+    "*.ERROR_OVERHEAT": "indicator.error",
+    "*.ERROR_OVERHEAT_ALARM": "indicator.error",
+    "*.ERROR_OVERLOAD": "indicator.error",
+    "*.ERROR_OVERLOAD_ALARM": "indicator.error",
+    "*.ERROR_REDUCED": "indicator.error",
+    "*.ERROR_REDUCED_ALARM": "indicator.error",
+    "*.FROST_PROTECTION": "indicator",
+    "*.HEATING_COOLING": "level.mode",
+    "*.HUMIDITY": "value.humidity",
+    "*.HUMIDITY_STATUS": "value",
+    "*.INCLUSION_UNSUPPORTED_DEVICE": "indicator.maintenance",
+    "*.INHIBIT": "switch",
+    "*.INSTALL_MODE": "indicator",
+    "*.INSTALL_TEST": "indicator",
+    "*.LEVEL": "level",
+    "*.LEVEL_REAL": "value",
+    "*.LEVEL_STATUS": "value",
+    "*.LOWBAT": "indicator.lowbat",
+    "*.LOWBAT_ALARM": "indicator.lowbat",
+    "*.LOW_BAT": "indicator.lowbat",
+    "*.LOW_BAT_ALARM": "indicator.lowbat",
+    "*.OLD_LEVEL": "button",
+    "*.ON_TIME": "value.interval",
+    "*.OPERATING_VOLTAGE": "value.voltage",
+    "*.OPERATING_VOLTAGE_STATUS": "value",
+    "*.PARTY_MODE": "switch.mode.party",
+    "*.PARTY_SET_POINT_TEMPERATURE": "level.temperature",
+    "*.PARTY_TIME_END": "date.end",
+    "*.PARTY_TIME_START": "date.start",
+    "*.PRESS_LONG": "button.long",
+    "*.PRESS_SHORT": "button",
+    "*.PROCESS": "value",
+    "*.QUICK_VETO_TIME": "value.interval",
+    "*.RAMP_STOP": "button.stop",
+    "*.RAMP_TIME": "value.interval",
+    "*.RSSI_DEVICE": "value.rssi",
+    "*.RSSI_PEER": "value.rssi",
+    "*.SABOTAGE": "indicator.alarm",
+    "*.SABOTAGE_ALARM": "indicator.alarm",
+    "*.SECTION": "value",
+    "*.SECTION_STATUS": "value",
+    "*.SET_POINT_MODE": "level.mode.thermostat",
+    "*.SET_POINT_TEMPERATURE": "level.temperature",
+    "*.STICKY_UNREACH": "indicator.maintenance.unreach",
+    "*.STICKY_UNREACH_ALARM": "indicator.maintenance.unreach",
+    "*.STOP": "button.stop",
+    "*.SWITCH_POINT_OCCURED": "indicator",
+    "*.TEMPERATURE": "value.temperature",
+    "*.UNREACH": "indicator.maintenance.unreach",
+    "*.UNREACH_ALARM": "indicator.maintenance.unreach",
+    "*.UPDATE_PENDING": "indicator.maintenance",
+    "*.UPDATE_PENDING_ALARM": "indicator.maintenance",
+    "*.VALVE_ADAPTION": "indicator.maintenance",
+    "*.VALVE_STATE": "value.valve",
+    "*.VALVE_STATE_ADJUSTMENT_TOO_BIG": "indicator.error",
+    "*.VALVE_STATE_ADJUSTMENT_TOO_SMALL": "indicator.error",
+    "*.VALVE_STATE_ERROR_POSITION": "indicator.error",
+    "*.VALVE_STATE_TOO_TIGHT": "indicator.error",
+    "*.WINDOW_STATE": "value.window",
+    "*.WORKING": "indicator.working"
+  }
+}