ilabs-flir 1.0.7 → 2.0.1

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRMeterLinkSensorPoll.h

@@ -0,0 +1,247 @@
+//
+//  FLIRMeterLinkSensorPoll.h
+//  ThermalSDK
+//
+//  Created by FLIR on 2021-01-19.
+//  Copyright © 2021 Teledyne FLIR. All rights reserved.
+//
+
+#pragma once
+
+#import <Foundation/Foundation.h>
+
+/** Supported data quantities */
+// must match enum ES_QUANTITY
+typedef NS_ENUM(NSInteger, ExternalSensorQuantity) {
+    ESQ_INVALID = 0,
+
+    ESQ_CURRENT,
+    ESQ_VOLTAGE,
+    ESQ_RESISTANCE,
+    ESQ_REACTANCE,
+    ESQ_IMPEDANCE,
+    ESQ_CONDUCTANCE,
+    ESQ_CAPACITANCE,
+    ESQ_INDUCTANCE,
+    ESQ_EL_FIELD,
+    ESQ_MAG_FIELD,
+    ESQ_MAG_FLUX,
+    ESQ_CHARGE,
+    ESQ_TEMPERATURE,
+    ESQ___FREE_SLOT,
+    ESQ_TIME,
+    ESQ_FREQUENCY,
+    ESQ_MASS,
+    ESQ_FORCE,
+    ESQ_PRESSURE,
+    ESQ_MOMENTUM,
+    ESQ_TORQUE,
+    ESQ_SPEED,
+    ESQ_ACCELERATION,
+    ESQ_ENERGY,
+    ESQ_POWER,
+    ESQ_ENTHALPY,
+    ESQ_RELHUMIDITY,
+    ESQ_ABSHUMIDITY,
+    ESQ_RELMOISTURE,
+    ESQ_DISTANCE,
+    ESQ_ANGLE,
+    ESQ_RADIOACTIVITY,
+    ESQ_RAD_EXPOSURE,
+    ESQ_RAD_ABS_DOSE,
+    ESQ_RAD_EQ_DOSE,
+    ESQ_MASS_MASS_FRAC,
+    ESQ_MASS_VOL_FRAC,
+    ESQ_VOL_VOL_FRAC,
+    ESQ_RAD_FLUX,
+    ESQ_LUM_FLUX,
+    ESQ_LUM_INTENSITY,
+    ESQ_ILLUMINANCE,
+    ESQ_POWER_FACTOR,
+
+    ESQ_NONE,            // New with Meterlink 2.1. Previous, SI units. But with MeterLink 2.1, this are more basic units.
+    ESQ_NO_IMPL,         // Not mapped so far.
+    ESQ_ADMITTANCE,
+    ESQ_RPM,
+    ESQ_DUTYCYCLE,
+    ESQ_TEST_VOLT,
+    ESQ_POLAR_INDEX,
+    ESQ_DAR,
+    ESQ_EBOND_TEST_VOLT,
+    ESQ_EBOND_TEST,
+    ESQ_20MA,
+    ESQ_PHASE,
+    ESQ_HARMONIC_LEV,
+    ESQ_HARMONIC_THD,
+    ESQ_CREST,
+    ESQ_QUALITY_FACT,
+    ESQ_DISSIPATION,
+    ESQ_ESR,
+    ESQ_AC_TESTER_LOAD,
+    ESQ_AC_TESTER_UNLOAD_VOLT,
+    ESQ_AC_TESTER_LOAD_VOLT,
+    ESQ_AC_TESTER_DROP,
+    ESQ_RECEPTACLE_TEST,
+    ESQ_AFCI,
+    ESQ_GFCI,
+    ESQ_GFCI_TRIP_CURR,
+    ESQ_GFCI_TRIP_TIME,
+    ESQ_EDP_TRIP_CURR,
+    ESQ_NEUTRAL_GROUND,
+    ESQ_HOT_IMP,
+    ESQ_NEUTRAL_IMP,
+    ESQ_GROUND_IMP,
+    ESQ_SHORT_CIRC_CURRENT,
+    ESQ_EMISSIVITY,
+    ESQ_RESMOISTURE,
+    ESQ_GROUP,
+    ESQ_CAPMOISTURE,
+    ESQ_SOILMOISTURE,
+    ESQ_AREA,
+    ESQ_VOLUME,
+    ESQ_EMF_FREQ,
+    ESQ_EMF_STRENGTH,
+    ESQ_WEIGHT,
+    ESQ_IRRADIANCE,
+    ESQ_COMPBEARING,
+    ESQ_PITCH,
+    ESQ_LATITUDE,
+    ESQ_LONGITUDE,
+    ESQ_ALTITUDE,
+    
+    ESQ_LAST
+};
+
+/** Supported data aux info */
+// must match enum ES_AUX_INFO
+typedef NS_ENUM(NSInteger, ExternalSensorAuxInfo) {
+    ESAI_INVALID = 0,
+
+    ESAI_DC,        //!< Voltage/current is DC
+    ESAI_AC,        //!< Voltage/current is AC
+    ESAI_INT,       //!< Measurement is internal
+    ESAI_EXT,       //!< Measurement is external
+    ESAI_MIN__DEPR, //!< This was actually peak min, moved to ES_MEAS_INFO
+    ESAI_MAX__DEPR, //!< This was actually peak max, moved to ES_MEAS_INFO
+    ESAI_DEW,       //!< Temperature is dew point temp.
+    ESAI_AIR,       //!< Temperature is air temp.
+    ESAI_IR,        //!< Temperature is IR reflected temp.
+    ESAI_K,         //!< Temperature is thermocouple type K temp.
+    ESAI_COND,      //!< Temperature is condensation temp.
+    ESAI_DB,        //!< Temperature is dry bulb temp.
+    ESAI_WB,        //!< Temperature is wet bulb temp.
+    ESAI_WME,       //!< Mass fraction is wood moisture equivalent
+    ESAI_AC_DC,     //!< Voltage/current is AC+DC (CM83)
+    ESAI_VFD,       //!< LowPassFilter is applied before measument, intended for VariableFrequencyDrives (VFD)(CM83)
+    ESAI_THD,       //!< THD Total Harmonic Mode (CM83)
+    ESAI_PF,        //!< Power Factor (CM83)
+    
+    // New in MeterLink 2.1
+    ESAI_WGBT,      //!< Temperature is wet bulb global temp.
+    
+    ESAI_LAST
+};
+
+/** Measurement info */
+// must match enum ES_MEAS_INFO
+typedef NS_ENUM(NSInteger, ExternalSensorMeasInfo) {
+    ESMI_INVALID = 0,
+
+    ESMI_MIN,         //!< Minimum value
+    ESMI_MAX,         //!< Maximum value
+    ESMI_PEAKMIN,     //!< Peak min value
+    ESMI_PEAKMAX,     //!< Peak max value
+    ESMI_PEAKTOPEAK,  //!< Value is peak-to-peak
+    ESMI_MEAN,        //!< Mean value
+    ESMI_RMS,         //!< Root mean square value
+    ESMI_MEDIAN,      //!< Median value
+    ESMI_ALARM,       //!< Alarm from measuring device
+    ESMI_HOLD,        //!< Measuring device are in HOLD
+    ESMI_ERROR,       //!< Measuring device reports error.
+
+    ESMI_LAST
+};
+
+/** Type of Meterlink device */
+// must match enum class MeterType
+typedef NS_ENUM(NSInteger, ExternalSensorMeterType) {
+    ESMT_OTHER = 0,
+    ESMT_DMM,
+    ESMT_CLAMP,
+    ESMT_TEMPERATUREMETER,
+    ESMT_RHMETER,
+    ESMT_ANEMOMETER,
+    ESMT_MANOMETER,
+    ESMT_MOISTURE,
+    ESMT_GASSENSOR,
+    ESMT_WATERQUALITY,
+    ESMT_VIBRATIONMETER,
+    ESMT_SOUNDMETER,
+    ESMT_WEIGHTSCALE,
+    ESMT_SPEED,
+    ESMT_TACHOMETER,
+    ESMT_PRESSUREMETER,
+    ESMT_LAST,
+    ESMT_INVALID = 0XFF
+};
+
+/**
+ *  Holds information of a MeterLink sensor poll and value contained in an image
+ */
+@interface FLIRMeterLinkSensorPoll : NSObject
+
+/**  Meterlink protocol version. 0,1 = Meterlink 2.0. 2 = Meterlink 2.1, 3 = Meterlink 3.0 */
+@property (nonatomic, readonly) NSInteger protocolVersion;
+
+/**  Model name of Meterlink device, e.g. "CM83" */
+@property (nonatomic, readonly, nonnull) NSString *modelName;
+
+/**  Device serial number */
+@property (nonatomic, readonly, nonnull) NSString *serialNumber;
+
+/**  Device type */
+@property (nonatomic, readonly) ExternalSensorMeterType meterType;
+
+/**  Value quantity (invalid if unknown) */
+@property (nonatomic, readonly) ExternalSensorQuantity quantity;
+
+/** Value quantity as string */
+@property (nonatomic, readonly, nonnull) NSString *quantityString;
+
+/**  Auxillary information (invalid if unknown) */
+@property (nonatomic, readonly) ExternalSensorAuxInfo auxInfo;
+
+/**  Auxillary information as string */
+@property (nonatomic, readonly, nonnull) NSString *auxInfoString;
+
+/**  Measure information (invalid if unknown) */
+@property (nonatomic, readonly) ExternalSensorMeasInfo measInfo;
+
+/**  Measure information as string */
+@property (nonatomic, readonly, nonnull) NSString *measInfoString;
+
+/**  Time when the message was parsed */
+@property (nonatomic, readonly, nonnull) NSDate *timeStamp;
+
+/**  Value */
+@property (nonatomic, readonly) double value;
+
+/**  Value as string */
+@property (nonatomic, readonly, nonnull) NSString *valueString;
+
+/**  Number of significant numbers in value */
+@property (nonatomic, readonly) NSInteger precision;
+
+/**  Value is difference */
+@property (nonatomic, readonly) BOOL isDifference;
+
+/**  Value is valid  */
+@property (nonatomic, readonly) BOOL isValueValid;
+
+/**  -9=nano, -6=u, -3=milli, +3=kilo, etc. Only available for protocolVersion>=2 */
+@property (nonatomic, readonly) NSInteger unitPrefix;
+
+/**  Index of value for a multi sensor-reading packet. Only available for protocolVersion>=2 */
+@property (nonatomic, readonly) NSInteger index;
+
+@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIROverlayController.h

@@ -0,0 +1,27 @@
+//
+//  FLIROverlayController.h
+//  ThermalSDK
+//
+//  Created by FLIR on 2020-09-15.
+//  Copyright © 2020 Teledyne FLIR. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+NS_ASSUME_NONNULL_BEGIN
+
+/**
+ *  Controls the visual overlay with settings and scale on a camera
+ */
+@interface FLIROverlayController : NSObject
+
+/** Check if camera has overlay */
+- (BOOL)getIsAvailable;
+/** Check if overlay is hidden */
+- (BOOL)getIsHidden;
+/** Set overlay hidden */
+- (BOOL)setIsHidden: (BOOL)hidden error:(out NSError * _Nullable *_Nullable)error;
+
+@end
+
+NS_ASSUME_NONNULL_END

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRPalette.h

@@ -0,0 +1,60 @@
+//
+//  FLIRPalette.h
+//  FLIR Thermal SDK
+//
+//  Copyright © 2019 Teledyne FLIR. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import <UIKit/UIKit.h>
+
+/**
+ *  Defines a palette representation, which can be applied to the ThermalImage in order to display it in specified colors.
+ *  The palette is a set of colors applied to the temperature or signal data stored in the ThermalImage.
+ *  Thanks to that each temperature / signal value can be displayed in specific color.
+ *  This creates a visual representation of the ThermalImage.
+ *  A Palette's object cannot be created directly.
+ *  It can be obtained from ThermalImage by calling ThermalImage.getPalette() method.
+ *  This method will always return an Palette instance.
+ *  A ThermalImage has to have palette set in order to be presented to the User.
+ *
+ *  The Palette for ThermalImage can be changed. In order to get the other palettes a PaletteManager class should be used.
+ *  It can provide the list of predefined palettes and allows to load more palettes as well from a user-defined location.
+ */
+@interface FLIRPalette : NSObject
+
+/**
+ *  Gets and sets the color of the above span.
+ */
+@property (readwrite) UIColor * _Nonnull aboveSpanColor;
+
+/**
+ *  Gets and sets the color of the below span.
+ */
+@property (readwrite) UIColor * _Nonnull belowSpanColor;
+
+/**
+ *  Gets and sets the color of the overflow.
+ */
+@property (readwrite) UIColor * _Nonnull overflowColor;
+
+/**
+ *  Gets and sets the color of the underflow.
+ */
+@property (readwrite) UIColor * _Nonnull underflowColor;
+
+/**
+ *  Gets or sets list of all the colors defining the palette.
+ */
+@property (readwrite) NSArray<UIColor *> * _Nonnull paletteColors;
+
+/**
+ *  Inverts the colors i.e. warm colors are shown as cold.
+ */
+@property (readwrite) BOOL isInverted;
+
+/**
+ *  Name of the Palette
+ */
+@property (readwrite) NSString * _Nonnull name;
+@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRPaletteController.h

@@ -0,0 +1,36 @@
+//
+//  FLIRPaletteController.h
+//  ThermalSDK
+//
+//  Created by FLIR on 2020-07-02.
+//  Copyright © 2020 Teledyne FLIR. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "FLIRCameraImport.h"
+
+/** camera palette */
+@interface FLIRRemotePalette : NSObject
+
+/** name of palette */
+@property (nonatomic, retain, nonnull) NSString* name;
+/** inverted state of palette */
+@property (nonatomic, assign) BOOL isInverted;
+/** Holds remote absolute path where palette file is stored on a particular camera, i.e.: "/FLIR/usr/etc/iron.pal". */
+@property (nonatomic, retain, nonnull) FLIRFileReference *fileReference;
+
+@end
+
+/**
+ *  Controller for the camera palettes
+ */
+@interface FLIRPaletteController : NSObject
+
+/** get current palette on camera */
+- (FLIRRemotePalette* _Nullable)getCurrentPalette;
+/** set current palette on camera */
+- (BOOL)setCurrentPalette: (FLIRRemotePalette* _Nonnull)currentPalette error: (out NSError * _Nullable *_Nullable)error;
+/** list available palettes on camera */
+- (NSArray<FLIRRemotePalette*>* _Nullable) getAvailablePalettes;
+
+@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRPaletteManager.h

@@ -0,0 +1,97 @@
+//
+//  FLIRPaletteManager.h
+//  FLIR Thermal SDK
+//
+//  Copyright © 2019 Teledyne FLIR. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "FLIRPalette.h"
+
+/**
+ *  The palette manager is a way to get the default palettes. These palettes can be applied to a thermal image, to change its look.
+ *  Every palette has a different color for a different temperature.
+ *  Some Palettes provide better contrast, while other expose the important details.
+ */
+@interface FLIRPaletteManager : NSObject
+
+/**
+ *  Gets the Arctic Palette.
+ */
+@property (readonly) FLIRPalette *arctic;
+
+/**
+ *  Gets the blackhot Palette.
+ */
+@property (readonly) FLIRPalette *blackhot;
+
+/**
+ *  Gets the gray / "black and white" Palette
+ */
+@property (readonly) FLIRPalette *gray;
+
+/**
+ *  Gets the iron Palette.
+ */
+@property (readonly) FLIRPalette *iron;
+
+/**
+ *  Gets the lava Palette.
+ */
+@property (readonly) FLIRPalette *lava;
+
+/**
+ *  Gets the rainbow Palette.
+ */
+@property (readonly) FLIRPalette *rainbow;
+
+/**
+ *  Gets the rainbow HighContrast Palette.
+ */
+@property (readonly) FLIRPalette *rainHC;
+
+/**
+ *  Gets the coldest Palette.
+ */
+@property (readonly) FLIRPalette *coldest;
+
+/**
+ *  Gets the hottest Palette.
+ */
+@property (readonly) FLIRPalette *hottest;
+
+/**
+ *  Gets the colorWheel6 Palette.
+ */
+@property (readonly) FLIRPalette *colorWheel6;
+
+/**
+ *  Gets the doubleRainbow Palette.
+ */
+@property (readonly) FLIRPalette *doubleRainbow;
+
+/**
+ *  Gets the whitehot Palette.
+ */
+@property (readonly) FLIRPalette *whitehot;
+
+/**
+ *  Gets a list of default Palettes.
+ *
+ *  @return an array with the default palettes
+ */
+- (NSArray<FLIRPalette*>*)getDefaultPalettes;
+
+/**
+ *  Open a palette from file.
+ *
+ *  @return a palette object based on palette file
+ */
+- (FLIRPalette *) openPalette:(NSURL *) paletteFile;
+
+/**
+ * Get the default manager
+ */
++ (instancetype)default;
+
+@end

package/ios/Flir/Frameworks/ThermalSDK.xcframework/ios-arm64/ThermalSDK.framework/Headers/FLIRQuantification.h

@@ -0,0 +1,55 @@
+//
+//  FLIRQuantification.h
+//  ThermalSDK
+//
+//  Created by Teledyne 2023-04-27.
+//  Copyright © 2023 Teledyne. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+///Describes the type of a gas leak
+typedef NS_ENUM(NSInteger, FLIRGasLeakType) {
+    /// Point-shaped leak
+    FLIRGasLeakType_point,
+    /// Diffused leak
+    FLIRGasLeakType_diffused
+};
+
+/// Describes the wind speed conditions
+typedef NS_ENUM(NSInteger, FLIRWindSpeed) {
+    /// Calm wind.
+    FLIRWindSpeed_calm,
+    /// Normal wind speed.
+    FLIRWindSpeed_normal,
+    /// High wind speed.
+    FLIRWindSpeed_high
+};
+
+/// Gas quantification information
+@interface FLIRGasQuantificationInput : NSObject
+/// Temperature of surrounding environment
+@property (nonatomic, readonly) double ambientTemperature;
+/// Name of the gas
+@property (nonatomic, readonly, nonnull) NSString* gas;
+/// Type of gas leak
+@property (nonatomic, readonly) FLIRGasLeakType leakType;
+/// Wind speed
+@property (nonatomic, readonly) FLIRWindSpeed windSpeed;
+/// Distance to object in meters
+@property (nonatomic, readonly) NSInteger distance;
+/// Detection threshold temperature difference
+@property (nonatomic, readonly) double thresholdDeltaTemperature;
+/// True if gas is warmer than the surrounding environment
+@property (nonatomic, readonly) BOOL emissive;
+
+@end
+
+/// Gas quantification result information
+@interface FLIRGasQuantificationResult : NSObject
+/// Amount of gas flow
+@property (nonatomic, readonly) double flow;
+/// Gas concentration
+@property (nonatomic, readonly) double concentration;
+
+@end