homebridge-viessmann-vicare 2.0.77 → 2.0.78

package/CHANGELOG.md

@@ -3,6 +3,13 @@
 All notable changes to homebridge-viessmann-vicare.
 
 
+### [2.0.78] - 2026-09-26
+- fix: **report "Device messages" were frozen**: the plugin stopped writing `viessmann-messages-<installation>-<device>.json` in 2.0.50, so the report showed months-old codes. The writer is back, now also includes fault codes (`device.messages.errors.raw`) and keeps a history (the API only returns current messages)
+- fix: report heating-curve analysis uses only heating-season samples (outdoor < 16 °C): no more "weather compensation not active" advice in summer
+- fix: report annual gas estimate requires ~a full year of data (a few summer weeks gave e.g. 52 m³/year)
+- fix: report comfort-vs-efficiency is not evaluated when there is no space-heating gas in the period (it claimed "system optimisation is working" in summer)
+- fix: report burner runtime shows one decimal below 1 %
+
 ### [2.0.77] - 2026-09-26
 - fix: **30/90/365-day reports failed with "Load failed"**: report generation was O(n²) (90 days took ~3 min on a Raspberry Pi, now a few seconds), the browser request stayed open for minutes, and the report tab was opened after the wait (blocked as a pop-up by Safari). Reports now run as background jobs polled by the page, and the tab is opened at click time
 - fix: report analysis: no false "short cycling" alarm when burner hours changed by less than 2 h (integer counter), heating-curve check uses only samples with the circuit in heating mode, 30-day gas forecast uses the period average with fewer than 14 days of data

package/README.md

@@ -1103,6 +1103,13 @@ For issues and questions:
 
 ## 📈 Changelog
 
+### [2.0.78] - 2026-09-26
+- fix: **report "Device messages" were frozen**: the plugin stopped writing `viessmann-messages-<installation>-<device>.json` in 2.0.50, so the report showed months-old codes. The writer is back, now also includes fault codes (`device.messages.errors.raw`) and keeps a history (the API only returns current messages)
+- fix: report heating-curve analysis uses only heating-season samples (outdoor < 16 °C): no more "weather compensation not active" advice in summer
+- fix: report annual gas estimate requires ~a full year of data (a few summer weeks gave e.g. 52 m³/year)
+- fix: report comfort-vs-efficiency is not evaluated when there is no space-heating gas in the period (it claimed "system optimisation is working" in summer)
+- fix: report burner runtime shows one decimal below 1 %
+
 ### [2.0.77] - 2026-09-26
 - fix: **30/90/365-day reports failed with "Load failed"**: report generation was O(n²) (90 days took ~3 min on a Raspberry Pi, now a few seconds), the browser request stayed open for minutes, and the report tab was opened after the wait (blocked as a pop-up by Safari). Reports now run as background jobs polled by the page, and the tab is opened at click time
 - fix: report analysis: no false "short cycling" alarm when burner hours changed by less than 2 h (integer counter), heating-curve check uses only samples with the circuit in heating mode, 30-day gas forecast uses the period average with fewer than 14 days of data

package/SETUP-GUIDE.md

@@ -1,8 +1,8 @@
-# Complete Setup Guide - v2.0.77
+# Complete Setup Guide - v2.0.78
 
 ## Overview
 
-This guide will walk you through setting up the Viessmann ViCare plugin v2.0.77 for Homebridge, including all the advanced features like intelligent caching, rate limiting protection, comprehensive configuration options, **complete localization support with custom names**, **CSV history logging**, **HTML diagnostic reports**, **energy system monitoring** (PV, battery, wallbox), and **heating schedule awareness** with visual bands in the HTML report, and **heat pump (Wärmepumpe) support** with automatic device detection.
+This guide will walk you through setting up the Viessmann ViCare plugin v2.0.78 for Homebridge, including all the advanced features like intelligent caching, rate limiting protection, comprehensive configuration options, **complete localization support with custom names**, **CSV history logging**, **HTML diagnostic reports**, **energy system monitoring** (PV, battery, wallbox), and **heating schedule awareness** with visual bands in the HTML report, and **heat pump (Wärmepumpe) support** with automatic device detection.
 
 ## Prerequisites
 
@@ -1292,6 +1292,9 @@ sudo systemctl restart homebridge
 
 ## Changelog
 
+### v2.0.78 (2026-09-26)
+- fix: report device messages up to date again (with fault codes and history); seasonal-aware heating-curve, annual gas and comfort analyses
+
 ### v2.0.77 (2026-09-26)
 - fix: long reports (30/90/365 days) — much faster, generated in background, no more "Load failed"
 - fix: OAuth URL always logged (Docker), no empty extra Boiler for energy devices, report analysis false alarms

package/dist/platform.d.ts

@@ -63,6 +63,13 @@ export declare class ViessmannPlatform implements DynamicPlatformPlugin {
     private setupRoomSensorDiscovery;
     private setupRoomAccessories;
     updateAllDevices(): Promise<void>;
+    /**
+     * Writes device.messages.* entries (status S.xx, info I.xx, service, errors F.xx) to
+     * viessmann-messages-<installationId>-<deviceId>.json, used by viessmann-report.js.
+     * The API only returns the CURRENT messages, so entries are merged with the existing
+     * file (deduplicated by code+timestamp, newest first, max 200) to keep a history.
+     */
+    private writeDeviceMessages;
     private updateCycleComplete;
     private writeApiStatusFile;
     private adjustRefreshInterval;

package/dist/platform.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"platform.d.ts","sourceRoot":"","sources":["../src/platform.ts"],"names":[],"mappings":"AAAA,OAAO,EACL,GAAG,EAGH,qBAAqB,EACrB,MAAM,EACN,iBAAiB,EACjB,cAAc,EACd,OAAO,EACP,cAAc,EACf,MAAM,YAAY,CAAC;AAGpB,OAAO,EAAE,YAAY,EAAE,uBAAuB,EAAE,MAAM,iBAAiB,CAAC;AAExE,OAAO,EAAE,qBAAqB,EAAE,gBAAgB,EAAE,gBAAgB,EAAE,eAAe,EAAE,YAAY,EAAE,MAAM,2BAA2B,CAAC;AACrI,OAAO,EAAE,uBAAuB,EAAE,MAAM,iBAAiB,CAAC;AAC1D,OAAO,EAAE,qBAAqB,EAAE,gBAAgB,EAAE,gBAAgB,EAAE,eAAe,EAAgB,MAAM,2BAA2B,CAAC;AAUrI,qBAAa,iBAAkB,YAAW,qBAAqB;aAgC3C,GAAG,EAAE,MAAM;aACX,MAAM,EAAE,uBAAuB,GAAG,cAAc;aAChD,GAAG,EAAE,GAAG;IAjC1B,SAAgB,OAAO,EAAE,OAAO,OAAO,CAAC;IACxC,SAAgB,cAAc,EAAE,OAAO,cAAc,CAAC;IAEtD,SAAgB,WAAW,EAAE,iBAAiB,EAAE,CAAM;IACtD,SAAgB,YAAY,EAAG,YAAY,CAAC;IAC5C,OAAO,CAAC,WAAW,CAAS;IAE5B,OAAO,CAAC,aAAa,CAA+B;IACpD,OAAO,CAAC,YAAY,CAAC,CAAiB;IACtC,OAAO,CAAC,qBAAqB,CAAC,CAAiB;IAE/C,OAAO,CAAC,iBAAiB,CAAC,CAAM;IAChC,OAAO,CAAC,oBAAoB,CAAK;IACjC,OAAO,CAAC,oBAAoB,CAAS;IACrC,OAAO,CAAC,wBAAwB,CAAC,CAAiB;IAClD,OAAO,CAAC,UAAU,CAAS;IAC3B,OAAO,CAAC,iBAAiB,CAAK;IAC9B,OAAO,CAAC,oBAAoB,CAAK;IACjC,OAAO,CAAC,iBAAiB,CAAK;IAG9B,OAAO,CAAC,oBAAoB,CAA0C;IACtE,OAAO,CAAC,iBAAiB,CAMvB;gBAGgB,GAAG,EAAE,MAAM,EACX,MAAM,EAAE,uBAAuB,GAAG,cAAc,EAChD,GAAG,EAAE,GAAG;IA+F1B,OAAO,CAAC,cAAc;IAmCtB,OAAO,CAAC,uBAAuB;IAQ/B,OAAO,CAAC,iBAAiB;IA2CzB,OAAO,CAAC,gBAAgB;YAWV,wBAAwB;YAkDxB,iCAAiC;YA+CjC,iCAAiC;YAoHjC,8BAA8B;YA2D9B,yCAAyC;IA4BhD,4BAA4B,CACjC,cAAc,EAAE,MAAM,EACtB,aAAa,EAAE,MAAM,EACrB,QAAQ,EAAE,MAAM,EAChB,MAAM,EAAE,MAAM,EACd,OAAO,GAAE,MAAkD,GAC1D,IAAI;IAgBP,OAAO,CAAC,yBAAyB;IAW1B,oBAAoB,IAAI;QAC7B,YAAY,EAAE,MAAM,CAAC;QACrB,iBAAiB,EAAE,MAAM,CAAC;QAC1B,aAAa,EAAE,MAAM,CAAC;QACtB,WAAW,EAAE,MAAM,CAAC;QACpB,cAAc,EAAE,MAAM,CAAC;QACvB,cAAc,EAAE,MAAM,CAAC;QACvB,aAAa,EAAE,MAAM,CAAC;KACvB;IAWD,kBAAkB,CAAC,SAAS,EAAE,iBAAiB;IAKzC,eAAe;IAuDrB,OAAO,CAAC,oBAAoB;IA8B5B,OAAO,CAAC,sBAAsB;IAO9B,OAAO,CAAC,iBAAiB;IAiBzB;;OAEG;IACH,OAAO,CAAC,mBAAmB;IA+CrB,sBAAsB,CAAC,YAAY,EAAE,qBAAqB,EAAE,OAAO,EAAE,gBAAgB,EAAE,MAAM,EAAE,eAAe;IAwC9G,oBAAoB,CACxB,YAAY,EAAE,qBAAqB,EACnC,OAAO,EAAE,gBAAgB,EACzB,MAAM,EAAE,eAAe,EACvB,QAAQ,EAAE,gBAAgB,EAAE;IA+CxB,iBAAiB,CACrB,YAAY,EAAE,qBAAqB,EACnC,OAAO,EAAE,gBAAgB,EACzB,MAAM,EAAE,eAAe,EACvB,QAAQ,EAAE,gBAAgB,EAAE;IAgCxB,8BAA8B,CAClC,YAAY,EAAE,qBAAqB,EACnC,OAAO,EAAE,gBAAgB,EACzB,MAAM,EAAE,eAAe,EACvB,QAAQ,EAAE,gBAAgB,EAAE;IAuCxB,oBAAoB,CACxB,YAAY,EAAE,qBAAqB,EACnC,OAAO,EAAE,gBAAgB,EACzB,MAAM,EAAE,eAAe,EACvB,QAAQ,EAAE,gBAAgB,EAAE;YAsEhB,wBAAwB;YA8CxB,oBAAoB;IAgC5B,gBAAgB;IA2HtB,OAAO,CAAC,mBAAmB;IA2C3B,OAAO,CAAC,kBAAkB;IAwC1B,OAAO,CAAC,qBAAqB;IA2B7B,OAAO,CAAC,KAAK;IAKb,OAAO,CAAC,qBAAqB;IAgB7B,OAAO,CAAC,eAAe;IAiFhB,kBAAkB;;;;;;;;;IAKlB,iBAAiB;;;;;;;;;0BA50BR,MAAM;+BACD,MAAM;2BACV,MAAM;yBACR,MAAM;4BACH,MAAM;4BACN,MAAM;2BACP,MAAM;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;CA61BxB"}
+{"version":3,"file":"platform.d.ts","sourceRoot":"","sources":["../src/platform.ts"],"names":[],"mappings":"AAAA,OAAO,EACL,GAAG,EAGH,qBAAqB,EACrB,MAAM,EACN,iBAAiB,EACjB,cAAc,EACd,OAAO,EACP,cAAc,EACf,MAAM,YAAY,CAAC;AAGpB,OAAO,EAAE,YAAY,EAAE,uBAAuB,EAAE,MAAM,iBAAiB,CAAC;AAExE,OAAO,EAAE,qBAAqB,EAAE,gBAAgB,EAAE,gBAAgB,EAAE,eAAe,EAAE,YAAY,EAAE,MAAM,2BAA2B,CAAC;AACrI,OAAO,EAAE,uBAAuB,EAAE,MAAM,iBAAiB,CAAC;AAC1D,OAAO,EAAE,qBAAqB,EAAE,gBAAgB,EAAE,gBAAgB,EAAE,eAAe,EAAgB,MAAM,2BAA2B,CAAC;AAUrI,qBAAa,iBAAkB,YAAW,qBAAqB;aAgC3C,GAAG,EAAE,MAAM;aACX,MAAM,EAAE,uBAAuB,GAAG,cAAc;aAChD,GAAG,EAAE,GAAG;IAjC1B,SAAgB,OAAO,EAAE,OAAO,OAAO,CAAC;IACxC,SAAgB,cAAc,EAAE,OAAO,cAAc,CAAC;IAEtD,SAAgB,WAAW,EAAE,iBAAiB,EAAE,CAAM;IACtD,SAAgB,YAAY,EAAG,YAAY,CAAC;IAC5C,OAAO,CAAC,WAAW,CAAS;IAE5B,OAAO,CAAC,aAAa,CAA+B;IACpD,OAAO,CAAC,YAAY,CAAC,CAAiB;IACtC,OAAO,CAAC,qBAAqB,CAAC,CAAiB;IAE/C,OAAO,CAAC,iBAAiB,CAAC,CAAM;IAChC,OAAO,CAAC,oBAAoB,CAAK;IACjC,OAAO,CAAC,oBAAoB,CAAS;IACrC,OAAO,CAAC,wBAAwB,CAAC,CAAiB;IAClD,OAAO,CAAC,UAAU,CAAS;IAC3B,OAAO,CAAC,iBAAiB,CAAK;IAC9B,OAAO,CAAC,oBAAoB,CAAK;IACjC,OAAO,CAAC,iBAAiB,CAAK;IAG9B,OAAO,CAAC,oBAAoB,CAA0C;IACtE,OAAO,CAAC,iBAAiB,CAMvB;gBAGgB,GAAG,EAAE,MAAM,EACX,MAAM,EAAE,uBAAuB,GAAG,cAAc,EAChD,GAAG,EAAE,GAAG;IA+F1B,OAAO,CAAC,cAAc;IAmCtB,OAAO,CAAC,uBAAuB;IAQ/B,OAAO,CAAC,iBAAiB;IA2CzB,OAAO,CAAC,gBAAgB;YAWV,wBAAwB;YAkDxB,iCAAiC;YA+CjC,iCAAiC;YAoHjC,8BAA8B;YA2D9B,yCAAyC;IA4BhD,4BAA4B,CACjC,cAAc,EAAE,MAAM,EACtB,aAAa,EAAE,MAAM,EACrB,QAAQ,EAAE,MAAM,EAChB,MAAM,EAAE,MAAM,EACd,OAAO,GAAE,MAAkD,GAC1D,IAAI;IAgBP,OAAO,CAAC,yBAAyB;IAW1B,oBAAoB,IAAI;QAC7B,YAAY,EAAE,MAAM,CAAC;QACrB,iBAAiB,EAAE,MAAM,CAAC;QAC1B,aAAa,EAAE,MAAM,CAAC;QACtB,WAAW,EAAE,MAAM,CAAC;QACpB,cAAc,EAAE,MAAM,CAAC;QACvB,cAAc,EAAE,MAAM,CAAC;QACvB,aAAa,EAAE,MAAM,CAAC;KACvB;IAWD,kBAAkB,CAAC,SAAS,EAAE,iBAAiB;IAKzC,eAAe;IAuDrB,OAAO,CAAC,oBAAoB;IA8B5B,OAAO,CAAC,sBAAsB;IAO9B,OAAO,CAAC,iBAAiB;IAiBzB;;OAEG;IACH,OAAO,CAAC,mBAAmB;IA+CrB,sBAAsB,CAAC,YAAY,EAAE,qBAAqB,EAAE,OAAO,EAAE,gBAAgB,EAAE,MAAM,EAAE,eAAe;IA4C9G,oBAAoB,CACxB,YAAY,EAAE,qBAAqB,EACnC,OAAO,EAAE,gBAAgB,EACzB,MAAM,EAAE,eAAe,EACvB,QAAQ,EAAE,gBAAgB,EAAE;IA+CxB,iBAAiB,CACrB,YAAY,EAAE,qBAAqB,EACnC,OAAO,EAAE,gBAAgB,EACzB,MAAM,EAAE,eAAe,EACvB,QAAQ,EAAE,gBAAgB,EAAE;IAgCxB,8BAA8B,CAClC,YAAY,EAAE,qBAAqB,EACnC,OAAO,EAAE,gBAAgB,EACzB,MAAM,EAAE,eAAe,EACvB,QAAQ,EAAE,gBAAgB,EAAE;IAuCxB,oBAAoB,CACxB,YAAY,EAAE,qBAAqB,EACnC,OAAO,EAAE,gBAAgB,EACzB,MAAM,EAAE,eAAe,EACvB,QAAQ,EAAE,gBAAgB,EAAE;YAsEhB,wBAAwB;YA8CxB,oBAAoB;IAgC5B,gBAAgB;IA4HtB;;;;;OAKG;IACH,OAAO,CAAC,mBAAmB;IA0C3B,OAAO,CAAC,mBAAmB;IA2C3B,OAAO,CAAC,kBAAkB;IAwC1B,OAAO,CAAC,qBAAqB;IA2B7B,OAAO,CAAC,KAAK;IAKb,OAAO,CAAC,qBAAqB;IAgB7B,OAAO,CAAC,eAAe;IAiFhB,kBAAkB;;;;;;;;;IAKlB,iBAAiB;;;;;;;;;0BAj4BR,MAAM;+BACD,MAAM;2BACV,MAAM;yBACR,MAAM;4BACH,MAAM;4BACN,MAAM;2BACP,MAAM;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;CAk5BxB"}

package/dist/platform.js

@@ -614,6 +614,9 @@ class ViessmannPlatform {
             await this.setupHeatingCircuitAccessories(installation, gateway, device, features);
             // Setup Energy / Heat Pump accessory (PV, battery, wallbox, electric DHW, Wärmepumpe)
             await this.setupEnergyAccessory(installation, gateway, device, features);
+            // Device messages (S./F./I. codes) for the HTML report — restored in 2.0.78
+            // (the writer was accidentally removed in 2.0.50, so the report showed stale messages)
+            this.writeDeviceMessages(features, installation.id, device.id);
             // ViCare Smart Climate rooms (one accessory per room) — issue #4
             if (this.config.features?.enableRoomSensors) {
                 await this.setupRoomAccessories(installation, gateway, device, features);
@@ -895,6 +898,7 @@ class ViessmannPlatform {
                         clearTimeout(timeoutId);
                         deviceFeatureCache.set(deviceKey, features);
                         successfulDevices++;
+                        this.writeDeviceMessages(features, accessory.context.installation.id, accessory.context.device.id);
                         this.log.debug(`✅ Fetched ${features.length} features for device ${accessory.context.device.id}`);
                         // Small delay between distinct device API calls only
                         if (this.config.enableRateLimitProtection !== false) {
@@ -952,6 +956,61 @@ class ViessmannPlatform {
             this.isUpdating = false;
         }
     }
+    /**
+     * Writes device.messages.* entries (status S.xx, info I.xx, service, errors F.xx) to
+     * viessmann-messages-<installationId>-<deviceId>.json, used by viessmann-report.js.
+     * The API only returns the CURRENT messages, so entries are merged with the existing
+     * file (deduplicated by code+timestamp, newest first, max 200) to keep a history.
+     */
+    writeDeviceMessages(features, installationId, deviceId) {
+        try {
+            const fsm = require('fs');
+            const pathm = require('path');
+            const sources = [
+                ['device.messages.errors.raw', 'error'],
+                ['device.messages.status.raw', 'status'],
+                ['device.messages.info.raw', 'info'],
+                ['device.messages.service.raw', 'service'],
+            ];
+            const fresh = [];
+            let found = false;
+            for (const [featureName, type] of sources) {
+                const entries = features.find(f => f.feature === featureName)?.properties?.entries?.value;
+                if (!Array.isArray(entries))
+                    continue;
+                found = true;
+                for (const e of entries) {
+                    if (e?.errorCode) {
+                        fresh.push({ errorCode: e.errorCode, timestamp: e.timestamp || new Date().toISOString(), type,
+                            busAddress: e.busAddress, busType: e.busType });
+                    }
+                }
+            }
+            if (!found)
+                return; // device without message features: leave any existing file untouched
+            const file = pathm.join(this.api.user.storagePath(), `viessmann-messages-${installationId}-${deviceId}.json`);
+            let old = [];
+            try {
+                old = JSON.parse(fsm.readFileSync(file, 'utf8'));
+                if (!Array.isArray(old))
+                    old = [];
+            }
+            catch { /* first run */ }
+            const seen = new Set();
+            const merged = [...fresh, ...old].filter(m => {
+                const k = `${m.errorCode}|${m.timestamp}`;
+                if (seen.has(k))
+                    return false;
+                seen.add(k);
+                return true;
+            }).sort((a, b) => new Date(b.timestamp).getTime() - new Date(a.timestamp).getTime()).slice(0, 200);
+            fsm.writeFileSync(file, JSON.stringify(merged, null, 2), 'utf8');
+            this.log.debug(`📋 Device messages: ${fresh.length} current, ${merged.length} kept → ${file}`);
+        }
+        catch (e) {
+            this.log.debug(`📋 writeDeviceMessages failed: ${e}`);
+        }
+    }
     updateCycleComplete(successful, rateLimited, errors, skipped, handlersCalled, handlersSkipped, elapsedMs) {
         const totalAccessories = this.accessories.length;
         const elapsedSec = (elapsedMs / 1000).toFixed(1);

package/dist/settings.d.ts

@@ -9,7 +9,7 @@ export declare const PLUGIN_NAME = "homebridge-viessmann-vicare";
 /**
  * Plugin version for User-Agent and logging
  */
-export declare const PLUGIN_VERSION = "2.0.77";
+export declare const PLUGIN_VERSION = "2.0.78";
 /**
  * Default configuration values
  */

package/dist/settings.js

@@ -12,7 +12,7 @@ exports.PLUGIN_NAME = 'homebridge-viessmann-vicare';
 /**
  * Plugin version for User-Agent and logging
  */
-exports.PLUGIN_VERSION = '2.0.77';
+exports.PLUGIN_VERSION = '2.0.78';
 /**
  * Default configuration values
  */

package/grafana/viessmann-dashboard.json

@@ -83,7 +83,7 @@
         "name": "kwh_m3",
         "label": "kWh/m³",
         "type": "constant",
-        "query": "10.5",
+        "query": "11.0",
         "hide": 2
       },
       {
@@ -1217,11 +1217,11 @@
         },
         "hide": 2,
         "refresh": 1,
-        "query": "SELECT IF('${lang}'='en','Heat produced / gas energy (current year). Calorific value from variable kwh_m3 (default 10.5 kWh/m³). Above 100% = inaccurate boiler estimate. Since v2.0.75.','Calore prodotto / energia del gas (anno corrente). Potere calorifico da variabile kwh_m3 (default 10,5 kWh/m³). Oltre 100% = stima della caldaia imprecisa. Dalla v2.0.75.')",
-        "definition": "SELECT IF('${lang}'='en','Heat produced / gas energy (current year). Calorific value from variable kwh_m3 (default 10.5 kWh/m³). Above 100% = inaccurate boiler estimate. Since v2.0.75.','Calore prodotto / energia del gas (anno corrente). Potere calorifico da variabile kwh_m3 (default 10,5 kWh/m³). Oltre 100% = stima della caldaia imprecisa. Dalla v2.0.75.')",
+        "query": "SELECT IF('${lang}'='en','Heat produced / gas energy (current year). Gross calorific value from variable kwh_m3 (default 11.0 kWh/Smc = 0.0396 GJ/Smc, as printed on Italian gas bills). Based on GCV: a well-condensing boiler is around 90–97%. Since v2.0.75.','Calore prodotto / energia del gas (anno corrente). Potere calorifico superiore da variabile kwh_m3 (default 11,0 kWh/Smc = 0,0396 GJ/Smc, il valore riportato in bolletta). Calcolato sul PCS: una condensazione ottima sta intorno al 90–97%. Dalla v2.0.75.')",
+        "definition": "SELECT IF('${lang}'='en','Heat produced / gas energy (current year). Gross calorific value from variable kwh_m3 (default 11.0 kWh/Smc = 0.0396 GJ/Smc, as printed on Italian gas bills). Based on GCV: a well-condensing boiler is around 90–97%. Since v2.0.75.','Calore prodotto / energia del gas (anno corrente). Potere calorifico superiore da variabile kwh_m3 (default 11,0 kWh/Smc = 0,0396 GJ/Smc, il valore riportato in bolletta). Calcolato sul PCS: una condensazione ottima sta intorno al 90–97%. Dalla v2.0.75.')",
         "current": {
-          "text": "Calore prodotto / energia del gas (anno corrente). Potere calorifico da variabile kwh_m3 (default 10,5 kWh/m³). Oltre 100% = stima della caldaia imprecisa. Dalla v2.0.75.",
-          "value": "Calore prodotto / energia del gas (anno corrente). Potere calorifico da variabile kwh_m3 (default 10,5 kWh/m³). Oltre 100% = stima della caldaia imprecisa. Dalla v2.0.75."
+          "text": "Calore prodotto / energia del gas (anno corrente). Potere calorifico superiore da variabile kwh_m3 (default 11,0 kWh/Smc = 0,0396 GJ/Smc, il valore riportato in bolletta). Calcolato sul PCS: una condensazione ottima sta intorno al 90–97%. Dalla v2.0.75.",
+          "value": "Calore prodotto / energia del gas (anno corrente). Potere calorifico superiore da variabile kwh_m3 (default 11,0 kWh/Smc = 0,0396 GJ/Smc, il valore riportato in bolletta). Calcolato sul PCS: una condensazione ottima sta intorno al 90–97%. Dalla v2.0.75."
         },
         "options": [],
         "multi": false,
@@ -1415,11 +1415,121 @@
         },
         "hide": 2,
         "refresh": 1,
-        "query": "SELECT IF('${lang}'='en','A slow steady drop indicates a leak or an expansion vessel that needs recharging.','Un calo lento e costante indica una perdita o il vaso di espansione da ricaricare.')",
-        "definition": "SELECT IF('${lang}'='en','A slow steady drop indicates a leak or an expansion vessel that needs recharging.','Un calo lento e costante indica una perdita o il vaso di espansione da ricaricare.')",
+        "query": "SELECT IF('${lang}'='en','Bands: red below 0.8 bar (refill), green 1.0–2.5 bar (optimal), orange above 2.5 bar. A slow steady drop indicates a leak or an expansion vessel that needs recharging.','Fasce: rosso sotto 0,8 bar (ricaricare), verde 1,0–2,5 bar (ottimale), arancio sopra 2,5 bar. Un calo lento e costante indica una perdita o il vaso di espansione da ricaricare.')",
+        "definition": "SELECT IF('${lang}'='en','Bands: red below 0.8 bar (refill), green 1.0–2.5 bar (optimal), orange above 2.5 bar. A slow steady drop indicates a leak or an expansion vessel that needs recharging.','Fasce: rosso sotto 0,8 bar (ricaricare), verde 1,0–2,5 bar (ottimale), arancio sopra 2,5 bar. Un calo lento e costante indica una perdita o il vaso di espansione da ricaricare.')",
         "current": {
-          "text": "Un calo lento e costante indica una perdita o il vaso di espansione da ricaricare.",
-          "value": "Un calo lento e costante indica una perdita o il vaso di espansione da ricaricare."
+          "text": "Fasce: rosso sotto 0,8 bar (ricaricare), verde 1,0–2,5 bar (ottimale), arancio sopra 2,5 bar. Un calo lento e costante indica una perdita o il vaso di espansione da ricaricare.",
+          "value": "Fasce: rosso sotto 0,8 bar (ricaricare), verde 1,0–2,5 bar (ottimale), arancio sopra 2,5 bar. Un calo lento e costante indica una perdita o il vaso di espansione da ricaricare."
+        },
+        "options": [],
+        "multi": false,
+        "includeAll": false,
+        "regex": "",
+        "sort": 0,
+        "skipUrlSync": true
+      },
+      {
+        "name": "t_wifi_ts",
+        "type": "query",
+        "datasource": {
+          "type": "mysql",
+          "uid": "${ds}"
+        },
+        "hide": 2,
+        "refresh": 1,
+        "query": "SELECT IF('${lang}'='en','Boiler Wi-Fi signal','Segnale Wi-Fi caldaia')",
+        "definition": "SELECT IF('${lang}'='en','Boiler Wi-Fi signal','Segnale Wi-Fi caldaia')",
+        "current": {
+          "text": "Segnale Wi-Fi caldaia",
+          "value": "Segnale Wi-Fi caldaia"
+        },
+        "options": [],
+        "multi": false,
+        "includeAll": false,
+        "regex": "",
+        "sort": 0,
+        "skipUrlSync": true
+      },
+      {
+        "name": "t_wifi_ts_d",
+        "type": "query",
+        "datasource": {
+          "type": "mysql",
+          "uid": "${ds}"
+        },
+        "hide": 2,
+        "refresh": 1,
+        "query": "SELECT IF('${lang}'='en','Bands: green above -67 dBm (good), orange -67…-80 dBm (fair), red below -80 dBm (dropouts likely).','Fasce: verde oltre -67 dBm (ottimo), arancio -67…-80 dBm (sufficiente), rosso sotto -80 dBm (disconnessioni probabili).')",
+        "definition": "SELECT IF('${lang}'='en','Bands: green above -67 dBm (good), orange -67…-80 dBm (fair), red below -80 dBm (dropouts likely).','Fasce: verde oltre -67 dBm (ottimo), arancio -67…-80 dBm (sufficiente), rosso sotto -80 dBm (disconnessioni probabili).')",
+        "current": {
+          "text": "Fasce: verde oltre -67 dBm (ottimo), arancio -67…-80 dBm (sufficiente), rosso sotto -80 dBm (disconnessioni probabili).",
+          "value": "Fasce: verde oltre -67 dBm (ottimo), arancio -67…-80 dBm (sufficiente), rosso sotto -80 dBm (disconnessioni probabili)."
+        },
+        "options": [],
+        "multi": false,
+        "includeAll": false,
+        "regex": "",
+        "sort": 0,
+        "skipUrlSync": true
+      },
+      {
+        "name": "t_curve_calc",
+        "type": "query",
+        "datasource": {
+          "type": "mysql",
+          "uid": "${ds}"
+        },
+        "hide": 2,
+        "refresh": 1,
+        "query": "SELECT IF('${lang}'='en','Curve flow','Mandata da curva')",
+        "definition": "SELECT IF('${lang}'='en','Curve flow','Mandata da curva')",
+        "current": {
+          "text": "Mandata da curva",
+          "value": "Mandata da curva"
+        },
+        "options": [],
+        "multi": false,
+        "includeAll": false,
+        "regex": "",
+        "sort": 0,
+        "skipUrlSync": true
+      },
+      {
+        "name": "t_curve_meas",
+        "type": "query",
+        "datasource": {
+          "type": "mysql",
+          "uid": "${ds}"
+        },
+        "hide": 2,
+        "refresh": 1,
+        "query": "SELECT IF('${lang}'='en','Measured flow (burner on)','Mandata misurata (bruciatore acceso)')",
+        "definition": "SELECT IF('${lang}'='en','Measured flow (burner on)','Mandata misurata (bruciatore acceso)')",
+        "current": {
+          "text": "Mandata misurata (bruciatore acceso)",
+          "value": "Mandata misurata (bruciatore acceso)"
+        },
+        "options": [],
+        "multi": false,
+        "includeAll": false,
+        "regex": "",
+        "sort": 0,
+        "skipUrlSync": true
+      },
+      {
+        "name": "t_outdoor",
+        "type": "query",
+        "datasource": {
+          "type": "mysql",
+          "uid": "${ds}"
+        },
+        "hide": 2,
+        "refresh": 1,
+        "query": "SELECT IF('${lang}'='en','Outdoor (boiler sensor)','Temperatura esterna (sonda caldaia)')",
+        "definition": "SELECT IF('${lang}'='en','Outdoor (boiler sensor)','Temperatura esterna (sonda caldaia)')",
+        "current": {
+          "text": "Temperatura esterna (sonda caldaia)",
+          "value": "Temperatura esterna (sonda caldaia)"
         },
         "options": [],
         "multi": false,
@@ -1437,11 +1547,11 @@
         },
         "hide": 2,
         "refresh": 1,
-        "query": "SELECT IF('${lang}'='en','Heating curve','Curva di riscaldamento')",
-        "definition": "SELECT IF('${lang}'='en','Heating curve','Curva di riscaldamento')",
+        "query": "SELECT IF('${lang}'='en','Heating curve','Curva climatica')",
+        "definition": "SELECT IF('${lang}'='en','Heating curve','Curva climatica')",
         "current": {
-          "text": "Curva di riscaldamento",
-          "value": "Curva di riscaldamento"
+          "text": "Curva climatica",
+          "value": "Curva climatica"
         },
         "options": [],
         "multi": false,
@@ -1459,11 +1569,11 @@
         },
         "hide": 2,
         "refresh": 1,
-        "query": "SELECT IF('${lang}'='en','Slope and shift of the weather-compensated heating curve. A slope that is too high raises flow temperature and burner starts.','Pendenza e spostamento (parallelo) della curva climatica. Una pendenza troppo alta aumenta la temperatura di mandata e le accensioni.')",
-        "definition": "SELECT IF('${lang}'='en','Slope and shift of the weather-compensated heating curve. A slope that is too high raises flow temperature and burner starts.','Pendenza e spostamento (parallelo) della curva climatica. Una pendenza troppo alta aumenta la temperatura di mandata e le accensioni.')",
+        "query": "SELECT IF('${lang}'='en','Line: flow temperature computed from the curve (slope, shift and Normal temperature) versus the outdoor sensor. Dots: average measured flow with the circuit heating and the burner on, in the selected period (no dots in summer). Note: the curve uses the boiler outdoor sensor, not the real outdoor temperature.','Linea: temperatura di mandata calcolata dalla curva (pendenza, spostamento e temperatura Normale) in funzione della sonda esterna. Punti: mandata media misurata con circuito in riscaldamento e bruciatore acceso, nel periodo selezionato (in estate non ci sono punti). Nota: la curva usa la sonda esterna della caldaia, non la temperatura reale.')",
+        "definition": "SELECT IF('${lang}'='en','Line: flow temperature computed from the curve (slope, shift and Normal temperature) versus the outdoor sensor. Dots: average measured flow with the circuit heating and the burner on, in the selected period (no dots in summer). Note: the curve uses the boiler outdoor sensor, not the real outdoor temperature.','Linea: temperatura di mandata calcolata dalla curva (pendenza, spostamento e temperatura Normale) in funzione della sonda esterna. Punti: mandata media misurata con circuito in riscaldamento e bruciatore acceso, nel periodo selezionato (in estate non ci sono punti). Nota: la curva usa la sonda esterna della caldaia, non la temperatura reale.')",
         "current": {
-          "text": "Pendenza e spostamento (parallelo) della curva climatica. Una pendenza troppo alta aumenta la temperatura di mandata e le accensioni.",
-          "value": "Pendenza e spostamento (parallelo) della curva climatica. Una pendenza troppo alta aumenta la temperatura di mandata e le accensioni."
+          "text": "Linea: temperatura di mandata calcolata dalla curva (pendenza, spostamento e temperatura Normale) in funzione della sonda esterna. Punti: mandata media misurata con circuito in riscaldamento e bruciatore acceso, nel periodo selezionato (in estate non ci sono punti). Nota: la curva usa la sonda esterna della caldaia, non la temperatura reale.",
+          "value": "Linea: temperatura di mandata calcolata dalla curva (pendenza, spostamento e temperatura Normale) in funzione della sonda esterna. Punti: mandata media misurata con circuito in riscaldamento e bruciatore acceso, nel periodo selezionato (in estate non ci sono punti). Nota: la curva usa la sonda esterna della caldaia, non la temperatura reale."
         },
         "options": [],
         "multi": false,
@@ -1473,7 +1583,7 @@
         "skipUrlSync": true
       },
       {
-        "name": "t_wifi_ts",
+        "name": "t_curve_params",
         "type": "query",
         "datasource": {
           "type": "mysql",
@@ -1481,11 +1591,121 @@
         },
         "hide": 2,
         "refresh": 1,
-        "query": "SELECT IF('${lang}'='en','Boiler Wi-Fi signal','Segnale Wi-Fi caldaia')",
-        "definition": "SELECT IF('${lang}'='en','Boiler Wi-Fi signal','Segnale Wi-Fi caldaia')",
+        "query": "SELECT IF('${lang}'='en','Curve settings','Impostazioni curva')",
+        "definition": "SELECT IF('${lang}'='en','Curve settings','Impostazioni curva')",
         "current": {
-          "text": "Segnale Wi-Fi caldaia",
-          "value": "Segnale Wi-Fi caldaia"
+          "text": "Impostazioni curva",
+          "value": "Impostazioni curva"
+        },
+        "options": [],
+        "multi": false,
+        "includeAll": false,
+        "regex": "",
+        "sort": 0,
+        "skipUrlSync": true
+      },
+      {
+        "name": "t_curve_params_d",
+        "type": "query",
+        "datasource": {
+          "type": "mysql",
+          "uid": "${ds}"
+        },
+        "hide": 2,
+        "refresh": 1,
+        "query": "SELECT IF('${lang}'='en','Current values set on the boiler. Typical slope for radiators 1.0–1.6; typical shift 0–5. The Comfort temperature is used only with the Comfort program / extended heating.','Valori attuali impostati in caldaia. Pendenza tipica radiatori 1,0–1,6; spostamento tipico 0–5. La temperatura Comfort viene usata solo con programma Comfort / riscaldamento prolungato.')",
+        "definition": "SELECT IF('${lang}'='en','Current values set on the boiler. Typical slope for radiators 1.0–1.6; typical shift 0–5. The Comfort temperature is used only with the Comfort program / extended heating.','Valori attuali impostati in caldaia. Pendenza tipica radiatori 1,0–1,6; spostamento tipico 0–5. La temperatura Comfort viene usata solo con programma Comfort / riscaldamento prolungato.')",
+        "current": {
+          "text": "Valori attuali impostati in caldaia. Pendenza tipica radiatori 1,0–1,6; spostamento tipico 0–5. La temperatura Comfort viene usata solo con programma Comfort / riscaldamento prolungato.",
+          "value": "Valori attuali impostati in caldaia. Pendenza tipica radiatori 1,0–1,6; spostamento tipico 0–5. La temperatura Comfort viene usata solo con programma Comfort / riscaldamento prolungato."
+        },
+        "options": [],
+        "multi": false,
+        "includeAll": false,
+        "regex": "",
+        "sort": 0,
+        "skipUrlSync": true
+      },
+      {
+        "name": "t_slope",
+        "type": "query",
+        "datasource": {
+          "type": "mysql",
+          "uid": "${ds}"
+        },
+        "hide": 2,
+        "refresh": 1,
+        "query": "SELECT IF('${lang}'='en','Slope','Pendenza')",
+        "definition": "SELECT IF('${lang}'='en','Slope','Pendenza')",
+        "current": {
+          "text": "Pendenza",
+          "value": "Pendenza"
+        },
+        "options": [],
+        "multi": false,
+        "includeAll": false,
+        "regex": "",
+        "sort": 0,
+        "skipUrlSync": true
+      },
+      {
+        "name": "t_shift",
+        "type": "query",
+        "datasource": {
+          "type": "mysql",
+          "uid": "${ds}"
+        },
+        "hide": 2,
+        "refresh": 1,
+        "query": "SELECT IF('${lang}'='en','Shift','Spostamento')",
+        "definition": "SELECT IF('${lang}'='en','Shift','Spostamento')",
+        "current": {
+          "text": "Spostamento",
+          "value": "Spostamento"
+        },
+        "options": [],
+        "multi": false,
+        "includeAll": false,
+        "regex": "",
+        "sort": 0,
+        "skipUrlSync": true
+      },
+      {
+        "name": "t_normal",
+        "type": "query",
+        "datasource": {
+          "type": "mysql",
+          "uid": "${ds}"
+        },
+        "hide": 2,
+        "refresh": 1,
+        "query": "SELECT IF('${lang}'='en','Normal','Normale')",
+        "definition": "SELECT IF('${lang}'='en','Normal','Normale')",
+        "current": {
+          "text": "Normale",
+          "value": "Normale"
+        },
+        "options": [],
+        "multi": false,
+        "includeAll": false,
+        "regex": "",
+        "sort": 0,
+        "skipUrlSync": true
+      },
+      {
+        "name": "t_reduced",
+        "type": "query",
+        "datasource": {
+          "type": "mysql",
+          "uid": "${ds}"
+        },
+        "hide": 2,
+        "refresh": 1,
+        "query": "SELECT IF('${lang}'='en','Reduced','Ridotta')",
+        "definition": "SELECT IF('${lang}'='en','Reduced','Ridotta')",
+        "current": {
+          "text": "Ridotta",
+          "value": "Ridotta"
         },
         "options": [],
         "multi": false,
@@ -2045,7 +2265,7 @@
               },
               {
                 "color": "orange",
-                "value": 1500
+                "value": 1800
               },
               {
                 "color": "red",
@@ -2139,7 +2359,7 @@
             {
               "type": "value",
               "options": {
-                "Ridotto": {
+                "Reduced": {
                   "color": "blue",
                   "index": 3
                 }
@@ -2148,7 +2368,7 @@
             {
               "type": "value",
               "options": {
-                "Reduced": {
+                "Ridotto": {
                   "color": "blue",
                   "index": 4
                 }
@@ -2175,7 +2395,7 @@
             {
               "type": "value",
               "options": {
-                "Vacanza": {
+                "Holiday": {
                   "color": "yellow",
                   "index": 7
                 }
@@ -2184,7 +2404,7 @@
             {
               "type": "value",
               "options": {
-                "Holiday": {
+                "Vacanza": {
                   "color": "yellow",
                   "index": 8
                 }
@@ -2284,7 +2504,7 @@
             {
               "type": "value",
               "options": {
-                "DHW only": {
+                "Solo ACS": {
                   "color": "blue",
                   "index": 3
                 }
@@ -2293,7 +2513,7 @@
             {
               "type": "value",
               "options": {
-                "Solo ACS": {
+                "DHW only": {
                   "color": "blue",
                   "index": 4
                 }
@@ -2402,7 +2622,7 @@
             {
               "type": "value",
               "options": {
-                "Off": {
+                "Spenta": {
                   "color": "text",
                   "index": 2
                 }
@@ -2411,7 +2631,7 @@
             {
               "type": "value",
               "options": {
-                "Spenta": {
+                "Off": {
                   "color": "text",
                   "index": 3
                 }
@@ -2420,7 +2640,7 @@
             {
               "type": "value",
               "options": {
-                "Efficiente": {
+                "Efficient": {
                   "color": "blue",
                   "index": 4
                 }
@@ -2429,7 +2649,7 @@
             {
               "type": "value",
               "options": {
-                "Efficient": {
+                "Efficiente": {
                   "color": "blue",
                   "index": 5
                 }
@@ -2438,7 +2658,7 @@
             {
               "type": "value",
               "options": {
-                "Efficient+": {
+                "Efficiente+": {
                   "color": "blue",
                   "index": 6
                 }
@@ -2447,7 +2667,7 @@
             {
               "type": "value",
               "options": {
-                "Efficiente+": {
+                "Efficient+": {
                   "color": "blue",
                   "index": 7
                 }
@@ -2939,7 +3159,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "Room target"
+              "options": "Obiettivo ambiente"
             },
             "properties": [
               {
@@ -2954,7 +3174,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "Obiettivo ambiente"
+              "options": "Room target"
             },
             "properties": [
               {
@@ -3107,7 +3327,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "Circuit flow"
+              "options": "Mandata circuito"
             },
             "properties": [
               {
@@ -3122,7 +3342,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "Mandata circuito"
+              "options": "Circuit flow"
             },
             "properties": [
               {
@@ -3262,7 +3482,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "DHW target"
+              "options": "Obiettivo ACS"
             },
             "properties": [
               {
@@ -3277,7 +3497,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "Obiettivo ACS"
+              "options": "DHW target"
             },
             "properties": [
               {
@@ -3453,7 +3673,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "Reduced"
+              "options": "Ridotta"
             },
             "properties": [
               {
@@ -3468,7 +3688,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "Ridotta"
+              "options": "Reduced"
             },
             "properties": [
               {
@@ -3642,7 +3862,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "Modulazione"
+              "options": "Modulation"
             },
             "properties": [
               {
@@ -3657,7 +3877,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "Modulation"
+              "options": "Modulazione"
             },
             "properties": [
               {
@@ -4238,11 +4458,11 @@
               },
               {
                 "color": "green",
-                "value": 88
+                "value": 86
               },
               {
                 "color": "purple",
-                "value": 110
+                "value": 105
               }
             ]
           },
@@ -4409,7 +4629,7 @@
             {
               "type": "value",
               "options": {
-                "Ridotto": {
+                "Reduced": {
                   "color": "blue",
                   "index": 3
                 }
@@ -4418,7 +4638,7 @@
             {
               "type": "value",
               "options": {
-                "Reduced": {
+                "Ridotto": {
                   "color": "blue",
                   "index": 4
                 }
@@ -4445,7 +4665,7 @@
             {
               "type": "value",
               "options": {
-                "Vacanza": {
+                "Holiday": {
                   "color": "yellow",
                   "index": 7
                 }
@@ -4454,7 +4674,7 @@
             {
               "type": "value",
               "options": {
-                "Holiday": {
+                "Vacanza": {
                   "color": "yellow",
                   "index": 8
                 }
@@ -4490,7 +4710,7 @@
             {
               "type": "value",
               "options": {
-                "DHW only": {
+                "Solo ACS": {
                   "color": "blue",
                   "index": 3
                 }
@@ -4499,7 +4719,7 @@
             {
               "type": "value",
               "options": {
-                "Solo ACS": {
+                "DHW only": {
                   "color": "blue",
                   "index": 4
                 }
@@ -4613,7 +4833,7 @@
             {
               "type": "value",
               "options": {
-                "Off": {
+                "Spenta": {
                   "color": "text",
                   "index": 2
                 }
@@ -4622,7 +4842,7 @@
             {
               "type": "value",
               "options": {
-                "Spenta": {
+                "Off": {
                   "color": "text",
                   "index": 3
                 }
@@ -4631,7 +4851,7 @@
             {
               "type": "value",
               "options": {
-                "Efficiente": {
+                "Efficient": {
                   "color": "blue",
                   "index": 4
                 }
@@ -4640,7 +4860,7 @@
             {
               "type": "value",
               "options": {
-                "Efficient": {
+                "Efficiente": {
                   "color": "blue",
                   "index": 5
                 }
@@ -4649,7 +4869,7 @@
             {
               "type": "value",
               "options": {
-                "Efficient+": {
+                "Efficiente+": {
                   "color": "blue",
                   "index": 6
                 }
@@ -4658,7 +4878,7 @@
             {
               "type": "value",
               "options": {
-                "Efficiente+": {
+                "Efficient+": {
                   "color": "blue",
                   "index": 7
                 }
@@ -4707,8 +4927,8 @@
         "uid": "${ds}"
       },
       "gridPos": {
-        "h": 8,
-        "w": 8,
+        "h": 7,
+        "w": 12,
         "x": 0,
         "y": 63
       },
@@ -4751,19 +4971,46 @@
               "mode": "none",
               "group": "A"
             },
-            "axisBorderShow": false
+            "axisBorderShow": false,
+            "thresholdsStyle": {
+              "mode": "area"
+            },
+            "pointSize": 6
           },
           "color": {
             "mode": "palette-classic"
           },
           "decimals": 2,
-          "noValue": "—"
+          "min": 0,
+          "max": 3,
+          "noValue": "—",
+          "thresholds": {
+            "mode": "absolute",
+            "steps": [
+              {
+                "color": "red",
+                "value": null
+              },
+              {
+                "color": "orange",
+                "value": 0.8
+              },
+              {
+                "color": "green",
+                "value": 1.0
+              },
+              {
+                "color": "orange",
+                "value": 2.5
+              }
+            ]
+          }
         },
         "overrides": [
           {
             "matcher": {
               "id": "byName",
-              "options": "Pressure"
+              "options": "Pressione"
             },
             "properties": [
               {
@@ -4778,7 +5025,7 @@
           {
             "matcher": {
               "id": "byName",
-              "options": "Pressione"
+              "options": "Pressure"
             },
             "properties": [
               {
@@ -4797,15 +5044,15 @@
     {
       "type": "timeseries",
       "id": 37,
-      "title": "${t_curve}",
+      "title": "${t_wifi_ts}",
       "datasource": {
         "type": "mysql",
         "uid": "${ds}"
       },
       "gridPos": {
-        "h": 8,
-        "w": 8,
-        "x": 8,
+        "h": 7,
+        "w": 12,
+        "x": 12,
         "y": 63
       },
       "targets": [
@@ -4818,7 +5065,7 @@
           "rawQuery": true,
           "editorMode": "code",
           "format": "time_series",
-          "rawSql": "SELECT TIMESTAMPDIFF(SECOND,'1970-01-01 00:00:00',ts) AS time, IF('${lang}'='en','Slope','Pendenza') AS metric, hc_slope AS value FROM viessmann_history WHERE accessory='hc0' AND event_type='snapshot' AND ts BETWEEN '1970-01-01' + INTERVAL $__unixEpochFrom() SECOND AND '1970-01-01' + INTERVAL $__unixEpochTo() SECOND AND hc_slope IS NOT NULL UNION ALL SELECT TIMESTAMPDIFF(SECOND,'1970-01-01 00:00:00',ts) AS time, IF('${lang}'='en','Shift','Spostamento') AS metric, hc_shift AS value FROM viessmann_history WHERE accessory='hc0' AND event_type='snapshot' AND ts BETWEEN '1970-01-01' + INTERVAL $__unixEpochFrom() SECOND AND '1970-01-01' + INTERVAL $__unixEpochTo() SECOND AND hc_shift IS NOT NULL ORDER BY time"
+          "rawSql": "SELECT TIMESTAMPDIFF(SECOND,'1970-01-01 00:00:00',ts) AS time, IF('${lang}'='en','RSSI','RSSI') AS metric, wifi_rssi AS value FROM viessmann_history WHERE accessory='boiler' AND event_type='snapshot' AND ts BETWEEN '1970-01-01' + INTERVAL $__unixEpochFrom() SECOND AND '1970-01-01' + INTERVAL $__unixEpochTo() SECOND AND wifi_rssi IS NOT NULL ORDER BY time"
         }
       ],
       "options": {
@@ -4834,12 +5081,12 @@
       },
       "fieldConfig": {
         "defaults": {
-          "unit": "none",
+          "unit": "dBm",
           "custom": {
             "drawStyle": "line",
             "lineInterpolation": "stepAfter",
             "lineWidth": 2,
-            "fillOpacity": 0,
+            "fillOpacity": 10,
             "showPoints": "auto",
             "spanNulls": 3600000,
             "barAlignment": 0,
@@ -4847,30 +5094,70 @@
               "mode": "none",
               "group": "A"
             },
-            "axisBorderShow": false
+            "axisBorderShow": false,
+            "thresholdsStyle": {
+              "mode": "area"
+            },
+            "pointSize": 6
           },
           "color": {
             "mode": "palette-classic"
           },
-          "decimals": 1
+          "decimals": 0,
+          "min": -95,
+          "max": -30,
+          "noValue": "—",
+          "thresholds": {
+            "mode": "absolute",
+            "steps": [
+              {
+                "color": "red",
+                "value": null
+              },
+              {
+                "color": "orange",
+                "value": -80
+              },
+              {
+                "color": "green",
+                "value": -67
+              }
+            ]
+          }
         },
-        "overrides": []
+        "overrides": [
+          {
+            "matcher": {
+              "id": "byName",
+              "options": "RSSI"
+            },
+            "properties": [
+              {
+                "id": "color",
+                "value": {
+                  "mode": "fixed",
+                  "fixedColor": "blue"
+                }
+              }
+            ]
+          }
+        ]
       },
-      "description": "${t_curve_d}"
+      "description": "${t_wifi_ts_d}"
     },
     {
-      "type": "timeseries",
+      "type": "trend",
       "id": 38,
-      "title": "${t_wifi_ts}",
+      "title": "${t_curve}",
       "datasource": {
         "type": "mysql",
         "uid": "${ds}"
       },
       "gridPos": {
-        "h": 8,
-        "w": 8,
-        "x": 16,
-        "y": 63
+        "h": 9,
+        "w": 16,
+        "x": 0,
+        "y": 70
       },
       "targets": [
         {
@@ -4881,11 +5168,13 @@
           },
           "rawQuery": true,
           "editorMode": "code",
-          "format": "time_series",
-          "rawSql": "SELECT TIMESTAMPDIFF(SECOND,'1970-01-01 00:00:00',ts) AS time, IF('${lang}'='en','RSSI','RSSI') AS metric, wifi_rssi AS value FROM viessmann_history WHERE accessory='boiler' AND event_type='snapshot' AND ts BETWEEN '1970-01-01' + INTERVAL $__unixEpochFrom() SECOND AND '1970-01-01' + INTERVAL $__unixEpochTo() SECOND AND wifi_rssi IS NOT NULL ORDER BY time"
+          "format": "table",
+          "rawSql": "WITH RECURSIVE s(x) AS (SELECT -15 UNION ALL SELECT x+1 FROM s WHERE x<25), p AS (SELECT hc_slope sl, hc_shift sh, COALESCE(hc_normal_temp, 20) rt FROM viessmann_history WHERE accessory='hc0' AND hc_slope IS NOT NULL ORDER BY ts DESC LIMIT 1), m AS (SELECT ROUND(b.outside_temp) o, ROUND(AVG(h.flow_temp),1) f, COUNT(*) n FROM viessmann_history h JOIN viessmann_history b ON b.accessory='boiler' AND b.event_type='snapshot' AND b.ts BETWEEN h.ts - INTERVAL 10 SECOND AND h.ts + INTERVAL 10 SECOND WHERE h.accessory='hc0' AND h.event_type='snapshot' AND h.mode='heating' AND b.burner_active=1 AND h.flow_temp > 0 AND h.ts BETWEEN '1970-01-01' + INTERVAL $__unixEpochFrom() SECOND AND '1970-01-01' + INTERVAL $__unixEpochTo() SECOND GROUP BY ROUND(b.outside_temp)) SELECT s.x AS outdoor, LEAST(GREATEST(ROUND(p.rt + p.sh - p.sl*(s.x-p.rt)*(1.4347 + 0.021*(s.x-p.rt) + 0.0002479*POW(s.x-p.rt,2)),1), p.rt), 80) AS `${t_curve_calc}`, m.f AS `${t_curve_meas}` FROM s JOIN p LEFT JOIN m ON m.o = s.x ORDER BY s.x"
         }
       ],
+      "description": "${t_curve_d}",
       "options": {
+        "xField": "outdoor",
         "legend": {
           "displayMode": "list",
           "placement": "bottom",
@@ -4898,29 +5187,137 @@
       },
       "fieldConfig": {
         "defaults": {
-          "unit": "dBm",
+          "unit": "celsius",
+          "decimals": 1,
+          "color": {
+            "mode": "palette-classic"
+          },
           "custom": {
             "drawStyle": "line",
-            "lineInterpolation": "stepAfter",
             "lineWidth": 2,
-            "fillOpacity": 10,
-            "showPoints": "auto",
-            "spanNulls": 3600000,
-            "barAlignment": 0,
-            "stacking": {
-              "mode": "none",
-              "group": "A"
+            "showPoints": "never",
+            "spanNulls": true,
+            "fillOpacity": 0
+          }
+        },
+        "overrides": [
+          {
+            "matcher": {
+              "id": "byName",
+              "options": "outdoor"
             },
-            "axisBorderShow": false
+            "properties": [
+              {
+                "id": "displayName",
+                "value": "${t_outdoor}"
+              }
+            ]
+          },
+          {
+            "matcher": {
+              "id": "byName",
+              "options": "${t_curve_calc}"
+            },
+            "properties": [
+              {
+                "id": "color",
+                "value": {
+                  "mode": "fixed",
+                  "fixedColor": "orange"
+                }
+              }
+            ]
+          },
+          {
+            "matcher": {
+              "id": "byName",
+              "options": "${t_curve_meas}"
+            },
+            "properties": [
+              {
+                "id": "custom.drawStyle",
+                "value": "points"
+              },
+              {
+                "id": "custom.pointSize",
+                "value": 8
+              },
+              {
+                "id": "color",
+                "value": {
+                  "mode": "fixed",
+                  "fixedColor": "blue"
+                }
+              }
+            ]
+          }
+        ]
+      }
+    },
+    {
+      "type": "stat",
+      "id": 39,
+      "title": "${t_curve_params}",
+      "datasource": {
+        "type": "mysql",
+        "uid": "${ds}"
+      },
+      "gridPos": {
+        "h": 9,
+        "w": 8,
+        "x": 16,
+        "y": 70
+      },
+      "targets": [
+        {
+          "refId": "A",
+          "datasource": {
+            "type": "mysql",
+            "uid": "${ds}"
+          },
+          "rawQuery": true,
+          "editorMode": "code",
+          "format": "table",
+          "rawSql": "SELECT UNIX_TIMESTAMP() AS time, hc_slope AS `${t_slope}`, hc_shift AS `${t_shift}`, hc_normal_temp AS `${t_normal} (°C)`, hc_reduced_temp AS `${t_reduced} (°C)`, hc_comfort_temp AS `Comfort (°C)` FROM viessmann_history WHERE accessory='hc0' AND hc_slope IS NOT NULL ORDER BY ts DESC LIMIT 1"
+        }
+      ],
+      "options": {
+        "reduceOptions": {
+          "calcs": [
+            "lastNotNull"
+          ],
+          "fields": "",
+          "values": false
+        },
+        "colorMode": "none",
+        "graphMode": "none",
+        "textMode": "value_and_name",
+        "justifyMode": "center",
+        "orientation": "auto",
+        "wideLayout": true,
+        "showPercentChange": false
+      },
+      "fieldConfig": {
+        "defaults": {
+          "unit": "none",
+          "mappings": [],
+          "thresholds": {
+            "mode": "absolute",
+            "steps": [
+              {
+                "color": "green",
+                "value": null
+              }
+            ]
           },
           "color": {
-            "mode": "palette-classic"
+            "mode": "thresholds"
           },
-          "decimals": 0,
-          "noValue": "—"
+          "decimals": 1
         },
         "overrides": []
-      }
+      },
+      "description": "${t_curve_params_d}"
     }
   ]
 }

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "homebridge-viessmann-vicare",
-  "version": "2.0.77",
+  "version": "2.0.78",
   "description": "Complete Homebridge plugin for Viessmann ViCare heating systems with full control capabilities, advanced rate limiting protection, and intelligent cache management",
   "main": "dist/index.js",
   "scripts": {

package/viessmann-report.js

@@ -151,6 +151,7 @@ const STRINGS = {
     // ── Comfort efficiency strings ────────────────────────────────────────
     ceTitle:            '⚖️ Comfort vs Efficiency',
     ceNotEnoughData:    'Accumulating data — this analysis will be available after {need} days of monitoring ({have} of {need} collected so far).',
+    ceNoHeating:        'No space heating in the selected period (summer / hot water only): comfort vs efficiency cannot be evaluated.',
     ceStabilityLabel:   'Temperature stability',
     ceGasNormLabel:     'Normalised gas consumption',
     ceTrendStability:   'Comfort trend',
@@ -492,6 +493,7 @@ const STRINGS = {
     // ── Comfort efficiency strings ────────────────────────────────────────
     ceTitle:            '⚖️ Comfort vs Efficienza',
     ceNotEnoughData:    "Dati in accumulo — questa analisi sarà disponibile dopo {need} giorni di monitoraggio ({have} di {need} raccolti finora).",
+    ceNoHeating:        "Nessun riscaldamento ambiente nel periodo selezionato (estate / solo acqua calda): comfort ed efficienza non sono valutabili.",
     ceStabilityLabel:   'Stabilità temperatura',
     ceGasNormLabel:     'Consumo gas normalizzato',
     ceTrendStability:   'Trend comfort',
@@ -850,7 +852,7 @@ const avgCycleDurReal = (!hoursLowRes && deltaStarts !== null && deltaHours !==
   ? (deltaHours * 60 / deltaStarts).toFixed(1)
   : null;
 const burnerRuntimePct = (!hoursLowRes && deltaHours !== null && periodHours !== null && periodHours > 0)
-  ? (deltaHours / periodHours * 100).toFixed(0)
+  ? (deltaHours / periodHours * 100).toFixed(deltaHours / periodHours * 100 < 1 ? 1 : 0)
   : null;
 const realCycleCount = deltaStarts;
 const realAvgDur     = avgCycleDurReal;
@@ -1344,7 +1346,7 @@ const corrPairs = hcHeatingRows
     const out  = parseFloat(r.outside_temp) || parseFloat(
       (nearestRow(boilerRows, r.timestamp).diff === 0 ? nearestRow(boilerRows, r.timestamp).row.outside_temp : '') || ''
     );
-    return (isNaN(flow) || isNaN(out) || flow <= 0 || out === 0) ? null : [out, flow];
+    return (isNaN(flow) || isNaN(out) || flow <= 0 || out === 0 || out >= 16) ? null : [out, flow];
   })
   .filter(Boolean);
 
@@ -1355,7 +1357,9 @@ const corrPairs2 = (() => {
     if (isNaN(flow) || flow <= 0) return null;
     const { row: best, diff: bd } = nearestRow(boilerRows, r.timestamp);
     const out = best && bd < 30*60*1000 ? parseFloat(best.outside_temp) : NaN;
-    return (!isNaN(out) && out !== 0) ? [out, flow] : null;
+    // Heating season only: above ~16 °C outdoor the circuit is in summer/ECO
+    // standby and the flow temperature follows DHW, not the heating curve.
+    return (!isNaN(out) && out !== 0 && out < 16) ? [out, flow] : null;
   }).filter(Boolean);
 })();
 
@@ -1632,6 +1636,8 @@ const comfortEfficiency = (() => {
   }
 
   if (windows.length < 10) return { available: false, daysHave: dataDays, daysNeed: MIN_DAYS_COMFORT };
+  // No space-heating gas in the period (summer): the comparison is meaningless
+  if (!windows.some(w => w.gasNorm > 0)) return { available: false, daysHave: dataDays, daysNeed: MIN_DAYS_COMFORT, noHeating: true };
 
   // Split into first/second half for trend
   const half = Math.floor(windows.length / 2);
@@ -1698,7 +1704,9 @@ if (gasDays.length >= 3) {
   const GAS_PRICE = parseFloat(getArg('--gasPriceEur', process.env.GAS_PRICE_EUR || '0.90'));
   // Annual estimate requires at least 14 days to avoid misleading projections
   // from short atypical periods (e.g. unusually cold/warm week).
-  const ANNUAL_MIN_DAYS = 14;
+  // A yearly figure extrapolated from a few summer weeks (DHW only) is meaningless:
+  // require data covering most of a year.
+  const ANNUAL_MIN_DAYS = 300;
   const hasEnoughForAnnual = n >= ANNUAL_MIN_DAYS;
   gasForecast = {
     avgPerDay:         yMean.toFixed(2),
@@ -2162,7 +2170,7 @@ footer{text-align:center;font-size:10px;color:#bbb;padding:16px}
   })()}` : `
   <div style="padding:18px 16px;background:#f8f9fa;border-radius:8px;border:1px dashed #ddd;text-align:center;color:#888;font-size:13px">
     <div style="font-size:24px;margin-bottom:8px">📊</div>
-    <div>${T('ceNotEnoughData', {need: comfortEfficiency.daysNeed, have: comfortEfficiency.daysHave})}</div>
+    <div>${comfortEfficiency.noHeating ? T('ceNoHeating') : T('ceNotEnoughData', {need: comfortEfficiency.daysNeed, have: comfortEfficiency.daysHave})}</div>
   </div>`}
 </div>