homebridge-melcloud-control 4.2.8 → 4.3.0-beta.0

package/CHANGELOG.md

@@ -26,7 +26,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## Changes
 
-- added option to set only switch for presets, scenses, schedules or buttons
+- added option to set only switch for presets, scenes, schedules or buttons
 - readme updated
 - cleanup
 

package/README.md

@@ -238,13 +238,13 @@ Homebridge plugin for Air Conditioner, Heat Pump and Energy Recovery Ventilation
 | `user` | Here set the account username. |
 | `passwd` | Here set the account password. |
 | `language` | Here select the account language. |
-| `type` | Here select the account type `None/Disabled`, `MELCloud`, `MELCloud Home`. |
+| `type` | Here select the account type `0 - None/Disabled`, `1 - MELCloud`, `2 - MELCloud Home`. |
 | `ataDevices[]` | Array of ATA devices created automatically after login to MELCloud from plugin config UI. |
 | `ataDevices[].id` | Read only data, do not change it. |
 | `ataDevices[].type` | Read only data, do not change it. |
 | `ataDevices[].typeString` | Read only data, do not change it. |
 | `ataDevices[].name` | Here You can change the `Accessory Name` which is exposed to the `Homebridge/HomeKit`. |
-| `ataDevices[].displayType` | Here select device control mode `None/Disabled`, `Heater/Cooler`, `Thermostat`. |
+| `ataDevices[].displayType` | Here select device control mode `0 - None/Disabled`, `1 - Heater/Cooler`, `2 - Thermostat`. |
 | `ataDevices[].heatDryFanMode` | Here select the operatiing mode for `Heat`, if this mode is not supported, it will be disabled. |
 | `ataDevices[].coolDryFanMode` | Here select the operatiing mode for `Cool`, if this mode is not supported, it will be disabled. |
 | `ataDevices[].autoDryFanMode` | Here select the operatiing mode for `Auto`, if this mode is not supported, it will be disabled.. |
@@ -260,18 +260,18 @@ Homebridge plugin for Air Conditioner, Heat Pump and Energy Recovery Ventilation
 | `ataDevices[].presets[]` | Array of ATA device `Presets` created automatically after login to MELCloud from plugin config UI. |
 | `ataDevices[].presets[].id` | Read only data, do not change it. |
 | `ataDevices[].presets[].name` | Here You can change the `Preset Name` which is exposed to the `Homebridge/HomeKit`. |
-| `ataDevices[].presets[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `ataDevices[].presets[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `ataDevices[].schedules[]` | Array of ATA device `Schedules` created automatically after login to MELCloud Home from plugin config UI. |
 | `ataDevices[].schedules[].id` | Read only data, do not change it. |
 | `ataDevices[].schedules[].name` | Here You can change the `Schedule Name` which is exposed to the `Homebridge/HomeKit`. |
-| `ataDevices[].schedules[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `ataDevices[].schedules[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `ataDevices[].scenes[].id` | Read only data, do not change it. |
 | `ataDevices[].scenes[].name` | Here You can change the `Scene Name` which is exposed to the `Homebridge/HomeKit`. |
-| `ataDevices[].scenes[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `ataDevices[].scenes[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `ataDevices[].buttonsSensors[]` | Array of buttons sensors. |
 | `ataDevices[].buttonsSensors[].name` | Here set `Button Name` which You want expose to the `Homebridge/HomeKit`. |
 | `ataDevices[].buttonsSensors[].mode` | Here select button mode, VH - Vane Horizontal, VV - Vane Horizontal. |
-| `ataDevices[].buttonsSensors[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `ataDevices[].buttonsSensors[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `ataDevices[].buttonsSensors[].namePrefix` | Here enable/disable the accessory name as a prefix for button/sensor name. |
 | `atwDevices[]` | Array of ATA devices created automatically after login to MELCloud from plugin config UI. |
 | `atwDevices[].id` | Read only data, do not change it. |
@@ -297,18 +297,18 @@ Homebridge plugin for Air Conditioner, Heat Pump and Energy Recovery Ventilation
 | `atwDevices[].presets[]` | Array of ATW device `Presets` created automatically after login to MELCloud from plugin config UI. |
 | `atwDevices[].presets[].id` | Read only data, do not change it. |
 | `atwDevices[].presets[].name` | Here You can change the `Preset Name` which is exposed to the `Homebridge/HomeKit`. |
-| `atwDevices[].presets[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `atwDevices[].presets[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `atwDevices[].schedules[]` | Array of ATW device `Schedules` created automatically after login to MELCloud Home from plugin config UI. |
 | `atwDevices[].schedules[].id` | Read only data, do not change it. |
 | `atwDevices[].schedules[].name` | Here You can change the `Schedule Name` which is exposed to the `Homebridge/HomeKit`. |
-| `atwDevices[].schedules[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `atwDevices[].schedules[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `atwDevices[].scenes[].id` | Read only data, do not change it. |
 | `atwDevices[].scenes[].name` | Here You can change the `Scene Name` which is exposed to the `Homebridge/HomeKit`. |
-| `atwDevices[].scenes[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `atwDevices[].scenes[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `atwDevices[].buttonsSensors[]` | Array of buttons sensors. |
 | `atwDevices[].buttonsSensors[].name` | Here set `Button Name` which You want expose to the `Homebridge/HomeKit`. |
 | `atwDevices[].buttonsSensors[].mode` | Here select button mode. |
-| `atwDevices[].buttonsSensors[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `atwDevices[].buttonsSensors[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `atwDevices[].buttonsSensors[].namePrefix` | Here enable/disable the accessory name as a prefix for button/sensor name. |
 | `ervDevices[]` | Array of ATA devices created automatically after login to MELCloud from plugin config UI. |
 | `ervDevices[].id` | Read only data, do not change it. |
@@ -327,18 +327,18 @@ Homebridge plugin for Air Conditioner, Heat Pump and Energy Recovery Ventilation
 | `ervDevices[].presets[]` | Array of ERV device `Presets` created automatically after login to MELCloud from plugin config UI. |
 | `ervDevices[].presets[].id` | Read only data, do not change it. |
 | `ervDevices[].presets[].name` | Here You can change the `Preset Name` which is exposed to the `Homebridge/HomeKit`. |
-| `ervDevices[].presets[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `ervDevices[].presets[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `ervDevices[].schedules[]` | Array of ERV device `Schedules` created automatically after login to MELCloud Home from plugin config UI. |
 | `ervDevices[].schedules[].id` | Read only data, do not change it. |
 | `ervDevices[].schedules[].name` | Here You can change the `Schedule Name` which is exposed to the `Homebridge/HomeKit`. |
-| `ervDevices[].schedules[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `ervDevices[].schedules[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `ervDevices[].scenes[].id` | Read only data, do not change it. |
 | `ervDevices[].scenes[].name` | Here You can change the `Scene Name` which is exposed to the `Homebridge/HomeKit`. |
-| `ervDevices[].scenes[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `ervDevices[].scenes[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `ervDevices[].buttonsSensors[]` | Array of buttons sensors. |
 | `ervDevices[].buttonsSensors[].name` | Here set `Button Name` which You want expose to the `Homebridge/HomeKit`. |
 | `ervDevices[].buttonsSensors[].mode` | Here select button mode. |
-| `ervDevices[].buttonsSensors[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch +Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
+| `ervDevices[].buttonsSensors[].displayType` | Here select display type in HomeKit, `0 - None/Disabled`, `1 - Motion Sensor`, `2 - Occupancy Sensor`, `3 - Contact Sensor`, `4 - Switch + Motion Sensor`, `5 - Switch + Occupancy Sensor`, `6 - Switch + Contact Sensor`, `7 - Switch`. |
 | `ervDevices[].buttonsSensors[].namePrefix` | Here enable/disable the accessory name as a prefix for button/sensor name. |
 | `refreshInterval` | Here set the background account data refresh time in (sec) , only for old MELCLoud, default `120s`. |
 | `log{}` | Log object. |

package/package.json

@@ -1,7 +1,7 @@
 {
   "displayName": "MELCloud Control",
   "name": "homebridge-melcloud-control",
-  "version": "4.2.8",
+  "version": "4.3.0-beta.0",
   "description": "Homebridge plugin to control Mitsubishi Air Conditioner, Heat Pump and Energy Recovery Ventilation.",
   "license": "MIT",
   "author": "grzegorz914",
@@ -39,7 +39,8 @@
     "async-mqtt": "^2.6.3",
     "axios": "^1.13.2",
     "express": "^5.1.0",
-    "puppeteer": "^24.30.0"
+    "puppeteer": "^24.30.0",
+    "ws": "^8.18.3"
   },
   "keywords": [
     "homebridge",

package/src/deviceata.js

@@ -1082,7 +1082,7 @@ class DeviceAta extends EventEmitter {
                         const buttonControlService = new serviceType(serviceName, `buttonControlService${deviceId} ${i}`);
                         buttonControlService.addOptionalCharacteristic(Characteristic.ConfiguredName);
                         buttonControlService.setCharacteristic(Characteristic.ConfiguredName, serviceName);
-                        buttonControlService.getCharacteristic(Characteristic, On)
+                        buttonControlService.getCharacteristic(Characteristic.On)
                             .onGet(async () => {
                                 const state = button.state;
                                 return state;

package/src/melcloudata.js

@@ -1,3 +1,4 @@
+import WebSocket from 'ws';
 import axios from 'axios';
 import EventEmitter from 'events';
 import ImpulseGenerator from './impulsegenerator.js';
@@ -25,6 +26,7 @@ class MelCloudAta extends EventEmitter {
         //set default values
         this.deviceData = {};
         this.headers = {};
+        this.start = true;
 
         //lock flag
         this.locks = false;
@@ -52,6 +54,7 @@ class MelCloudAta extends EventEmitter {
 
     async checkState() {
         try {
+
             //read device info from file
             const devicesData = await this.functions.readData(this.devicesFile, true);
             if (!devicesData) return;
@@ -73,6 +76,33 @@ class MelCloudAta extends EventEmitter {
             }
             if (this.logDebug) this.emit('debug', `Device Data: ${JSON.stringify(deviceData, null, 2)}`);
 
+                        if (this.start) {
+                const hash = '2db32d6f-c19c-4b1f-a0dd-1915420a5152';
+
+                const ws = new WebSocket(`wss://ws.melcloudhome.com/?hash=${hash}`, {
+                    headers: {
+                        'Origin': 'https://melcloudhome.com',
+                        'User-Agent': this.headers['User-Agent'],
+                        'Pragma': 'no-cache',
+                        'Cache-Control': 'no-cache'
+                    }
+                });
+                ws.on('open', () => {
+                    if (!this.logDebug) this.emit('warn', `Connected to MelCloudHome WebSocket`);
+                    this.start = false;
+                })
+                    .on('message', (data) => {
+                        if (!this.logDebug) this.emit('warn', `Incoming message:', data.toString()`);
+                    })
+                    .on('close', () => {
+                        if (!this.logDebug) this.emit('warn', `Connection closed`);
+                    })
+                    .on('error', (error) => {
+                        if (!this.logDebug) this.emit('warn', `Connected error: ${error}`);
+                    });
+            }
+
+
             //device
             const serialNumber = deviceData.SerialNumber || '4.0.0';
             const firmwareAppVersion = deviceData.Device?.FirmwareAppVersion || '4.0.0';