npm - homebridge-melcloud-control - Versions diffs - 4.10.4 → 4.10.6 - Mend

homebridge-melcloud-control 4.10.4 → 4.10.6

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.

Files changed (6) hide show

package/CHANGELOG.md CHANGED Viewed

@@ -24,52 +24,65 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - For plugin < v4.6.0 use Homebridge UI <= v5.5.0
 - For plugin >= v4.6.0 use Homebridge UI >= v5.13.0
-# [4.10.2] - (18.04.2026)
+## [4.10.5] - (08.05.2026)
-## Changes
+### Changes
+- fix RESTFul and MQTT set commands not working after externalIntegrations refactor (missing deviceData argument)
+- fix ATW SetTemperatureZone1 sending wrong EffectiveFlag (was SetTemperatureZone2)
+- fix ATW ProhibitZone1/ProhibitZone2 referencing undefined EffectiveFlags (now ProhibitHeatingZone1/ProhibitHeatingZone2)
+- fix ATW holiday mode button TypeError for MELCloud Home (payload.holidayMode.enabled → payload.enabled)
+- fix ATW Zone 2 thermostat target operation mode using operationModeZone1 instead of operationModeZone2
+- fix ATW button state update using wrong mode numbers for Zone 1 and Hot Water (modes 20-50 were swapped)
+- fix ATW Holiday button state never updating (case 53 → case 3)
+- fix typos in debug log messages
+## [4.10.2] - (18.04.2026)
+### Changes
 - fix [#243](https://github.com/grzegorz914/homebridge-melcloud-control/issues/243)
 - cleanup
-# [4.10.1] - (17.04.2026)
+## [4.10.1] - (17.04.2026)
-## Changes
+### Changes
 - fix RESTFul port assigned
 - stability and performance improvements
 - cleanup
-# [4.10.0] - (16.04.2026)
+## [4.10.0] - (16.04.2026)
-## Changes
+### Changes
 - added web socket for real time data update with MELCloud Home
 - cleanup
-# [4.9.1] - (15.04.2026)
+## [4.9.1] - (15.04.2026)
-## Changes
+### Changes
 - fix scene and shedule enable/disable for MELCloud Home
-# [4.9.0] - (15.04.2026)
+## [4.9.0] - (15.04.2026)
-## Changes
+### Changes
 - refactor MELCloud Home to use Bearer token for authentication instead of cookies, fix [#240]
 - bump dependencies
 - cleanup
-# [4.8.7] - (10.04.2026)
+## [4.8.7] - (10.04.2026)
-## Changes
+### Changes
 - refactor connect manager
 - cleanup
-# [4.8.4] - (22.03.2026)
+## [4.8.4] - (22.03.2026)
-## Changes
+### Changes
 - fix report correct fan mode fter power ON with HK
 - fix wide vane support
@@ -77,9 +90,9 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - bump dependencies
 - cleanup
-# [4.8.3] - (17.03.2026)
+## [4.8.3] - (17.03.2026)
-## Changes
+### Changes
 - fix fan mode control and display
 - fix account disable
@@ -87,9 +100,9 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - redme update
 - cleanup
-# [4.8.0] - (23.02.2026)
+## [4.8.0] - (23.02.2026)
-## Changes
+### Changes
 - add support to update room temperature over MQTT or RESTFul, fix [#238](https://github.com/grzegorz914/homebridge-melcloud-control/issues/238)
 - bump dependencies
@@ -97,9 +110,9 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - redme update
 - cleanup
-# [4.7.10] - (19.02.2026)
+## [4.7.10] - (19.02.2026)
-## Changes
+### Changes
 - fix [#237](https://github.com/grzegorz914/homebridge-melcloud-control/issues/237)
 - bump dependencies
@@ -107,9 +120,9 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - redme update
 - cleanup
-# [4.7.9] - (18.02.2026)
+## [4.7.9] - (18.02.2026)
-## Changes
+### Changes
 - fix wrong display zone 2 for ATW (MELCloud Home)
 - fix set ATW different params
@@ -120,44 +133,44 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - redme update
 - cleanup
-# [4.7.8] - (02.02.2026)
+## [4.7.8] - (02.02.2026)
-## Changes
+### Changes
 - fix [#236](https://github.com/grzegorz914/homebridge-melcloud-control/issues/236)
 - cleanup
-# [4.7.7] - (01.02.2026)
+## [4.7.7] - (01.02.2026)
-## Changes
+### Changes
 - fix frost protection characteristics current temp update for ATW
 - cleanup
-# [4.7.6] - (31.01.2026)
+## [4.7.6] - (31.01.2026)
-## Changes
+### Changes
 - stability and performance improvements
 - cleanup
-# [4.7.5] - (30.01.2026)
+## [4.7.5] - (30.01.2026)
-## Changes
+### Changes
 - stability and performance improvements
 - cleanup
-# [4.7.4] - (29.01.2026)
+## [4.7.4] - (29.01.2026)
-## Changes
+### Changes
 - fix ATW Zone 2
 - cleanup
-# [4.7.3] - (29.01.2026)
+## [4.7.3] - (29.01.2026)
-## Changes
+### Changes
 - fix [#235](https://github.com/grzegorz914/homebridge-melcloud-control/issues/235)
 - fix 2 [#233](https://github.com/grzegorz914/homebridge-melcloud-control/issues/233)
@@ -167,9 +180,9 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - other fixes for ATA, ATW, ERV
 - cleanup
-# [4.7.2] - (29.01.2026)
+## [4.7.2] - (29.01.2026)
-## Changes
+### Changes
 - fix zone2 for ATW devices
 - constants updated
@@ -177,17 +190,17 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - bump dependencies
 - cleanup
-# [4.7.1] - (27.01.2026)
+## [4.7.1] - (27.01.2026)
-## Changes
+### Changes
 - add falback to power for unit status in melcloud home
 - constants updated
 - cleanup
-# [4.7.0] - (27.01.2026)
+## [4.7.0] - (27.01.2026)
-## Changes
+### Changes
 - add support for ATW, fix [#233](https://github.com/grzegorz914/homebridge-melcloud-control/issues/233), thanks @bastienb99
 - fix [#232](https://github.com/grzegorz914/homebridge-melcloud-control/issues/232)
@@ -196,75 +209,75 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - bump dependencies
 - cleanup
-# [4.6.6] - (23.01.2026)
+## [4.6.6] - (23.01.2026)
-## Changes
+### Changes
 - fix devices array initialization from UI on first run, fix [#231](https://github.com/grzegorz914/homebridge-melcloud-control/issues/231)
 - config schema updated
 - bump dependencies
 - cleanup
-# [4.6.4] - (10.01.2026)
+## [4.6.4] - (10.01.2026)
-## Changes
+### Changes
 - config schema updated
 - fix hide log success and dev info
 - bump dependencies
 - cleanup
-# [4.6.3] - (01.01.2026)
+## [4.6.3] - (01.01.2026)
-## Changes
+### Changes
 - config schema updated
 - cleanup
-# [4.6.2] - (01.01.2026)
+## [4.6.2] - (01.01.2026)
-## Changes
+### Changes
 - improvement support of Homebridge UI >= v5.13.0
 - config schema updated
 - redme updated
 - cleanup
-# [4.6.1] - (29.12.2025)
+## [4.6.1] - (29.12.2025)
-## Changes
+### Changes
 - config schema updated
 - redme updated
 - cleanup
-# [4.6.0] - (28.12.2025)
+## [4.6.0] - (28.12.2025)
-## Changes
+### Changes
 - added support for Homebridge UI >= v5.13.0, [#228](https://github.com/grzegorz914/homebridge-melcloud-control/issues/228)
 - config schema updated
 - redme updated
 - cleanup
-# [4.5.7] - (24.12.2025)
+## [4.5.7] - (24.12.2025)
-## Changes
+### Changes
 - fix [#229](https://github.com/grzegorz914/homebridge-melcloud-control/issues/229)
 - cleanup
-# [4.5.6] - (22.12.2025)
+## [4.5.6] - (22.12.2025)
-## Changes
+### Changes
 - improvements of arch detection
 - fix install chrome browser for docker image
 - cleanup
-# [4.5.5] - (21.12.2025)
+## [4.5.5] - (21.12.2025)
-## Changes
+### Changes
 - fix characteristics warning in Thermostat mode if frost protection active
 - fix device type shows undefined
@@ -272,21 +285,21 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - redme updated
 - cleanup
-# [4.5.4] - (19.12.2025)
+## [4.5.4] - (19.12.2025)
-## Changes
+### Changes
 - MELCLoud, fix[#227](https://github.com/grzegorz914/homebridge-melcloud-control/issues/227)
-# [4.5.3] - (19.12.2025)
+## [4.5.3] - (19.12.2025)
-## Changes
+### Changes
 - MELCLoud Home, fix[#227](https://github.com/grzegorz914/homebridge-melcloud-control/issues/227)
-# [4.5.0] - (19.12.2025)
+## [4.5.0] - (19.12.2025)
-## Changes
+### Changes
 - stability and performance improvements
 - remove oldnot existed presets, schedules, scenes fom config during (Connect To Melcloud)
@@ -295,9 +308,9 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - redme updated
 - cleanup
-# [4.4.0] - (10.12.2025)
+## [4.4.0] - (10.12.2025)
-## Changes
+### Changes
 - added possibility to set frost protection min/max temperaure (ATA, ATW)
 - added possibility to set overheat protection min/max temperture (ATA)
@@ -306,59 +319,59 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - bump dependencies
 - cleanup
-# [4.3.11] - (07.12.2025)
+## [4.3.11] - (07.12.2025)
-## Changes
+### Changes
 - stability and performance improvements
 - bump dependencies
 - cleanup
-# [4.3.9] - (01.12.2025)
+## [4.3.9] - (01.12.2025)
-## Changes
+### Changes
 - stability and performance improvements
 - fix vane H/V display wrong state
 - cleanup
-# [4.3.8] - (29.11.2025)
+## [4.3.8] - (29.11.2025)
-## Changes
+### Changes
 - display warning if device is disabled in config
 - display warning if device not exist in MELCLoud and is configured in config
 - cleanup
-# [4.3.7] - (28.11.2025)
+## [4.3.7] - (28.11.2025)
-## Changes
+### Changes
 - fix operation mode FAN and AUTO for MELCloud Home ATA
 - stability and performance improvements
 - config schema updated
 - cleanup
-# [4.3.5] - (24.11.2025)
+## [4.3.5] - (24.11.2025)
-## Changes
+### Changes
 - removed device refresh time settings
 - stability and performance improvements
 - redme updated
 - cleanup
-# [4.3.4] - (23.11.2025)
+## [4.3.4] - (23.11.2025)
-## Changes
+### Changes
 - fix account monitoring start
 - stability improvements
 - cleanup
-# [4.3.3] - (22.11.2025)
+## [4.3.3] - (22.11.2025)
-## Changes
+### Changes
 - fix [#224](https://github.com/grzegorz914/homebridge-melcloud-control/issues/224)
 - fix presets report wrong state
@@ -367,44 +380,44 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - bump dependencies
 - cleanup
-# [4.3.2] - (21.11.2025)
+## [4.3.2] - (21.11.2025)
-## Changes
+### Changes
 - stability improvements
 - cleanup
-# [4.3.0] - (20.11.2025)
+## [4.3.0] - (20.11.2025)
-## Changes
+### Changes
 - use web socket for Real Time communication with MELCloud Home
 - cleanup
-# [4.2.8] - (18.11.2025)
+## [4.2.8] - (18.11.2025)
-## Changes
+### Changes
 - added option to set only switch for presets, scenes, schedules or buttons
 - readme updated
 - cleanup
-# [4.2.7] - (18.11.2025)
+## [4.2.7] - (18.11.2025)
-## Changes
+### Changes
 - fix [#220](https://github.com/grzegorz914/homebridge-melcloud-control/issues/220)
-# [4.2.6] - (18.11.2025)
+## [4.2.6] - (18.11.2025)
-## Changes
+### Changes
 - stability improvements of RESTFul and MQTT start
 - cleanup
-# [4.2.5] - (17.11.2025)
+## [4.2.5] - (17.11.2025)
-## Changes
+### Changes
 - fix device control stop working after some time
 - fix device state not refresh
@@ -416,7 +429,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.2.3] - (15.11.2025)
-## Changes
+### Changes
 - added scenes support for MELCloud Home
 - fix some issues
@@ -427,7 +440,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.2.2] - (14.11.2025)
-## Changes
+### Changes
 - added in standby mode sensor
 - fix device control after some time
@@ -438,7 +451,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.2.1] - (13.11.2025)
-## Changes
+### Changes
 - RESTFul and MQTT update for MELCloud Home
 - bump dependencies
@@ -448,7 +461,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.2.0] - (13.11.2025)
-## Changes
+### Changes
 - initial support for MELCloud Home ATW device
 - added frost protection control for MELCloud Home ATA device
@@ -460,7 +473,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.1.2] - (11.11.2025)
-## Changes
+### Changes
 - fix [#218](https://github.com/grzegorz914/homebridge-melcloud-control/issues/218)
 - added schedules support for MELCLoud Home ATA devices
@@ -470,7 +483,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.1.1] - (10.11.2025)
-## Changes
+### Changes
 - added shedule sensor for MELCLoud Home ATA devices
 - config schema updated
@@ -479,7 +492,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.1.0] - (10.11.2025)
-## Changes
+### Changes
 - changed accessory category for ATA devices, required add accessory to KomeKit again
 - added frost protection sensor for MELCLoud Home ATA devices
@@ -491,7 +504,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.0.3] - (08.11.2025)
-## Changes
+### Changes
 - fix ATW and ERV for old MELCloud
 - bump dependencies
@@ -500,7 +513,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.0.2] - (06.11.2025)
-## Changes
+### Changes
 - fix RESTFul extrnal integration for MELCloud Home devices
 - readme updated
@@ -508,7 +521,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.0.1] - (06.11.2025)
-## Changes
+### Changes
 - fix start error for old MELCLoud after update
 - bump dependencies
@@ -517,7 +530,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [4.0.0] - (05.11.2025)
-## Changes
+### Changes
 - added support for MELCloud Home ATA devices [#215](https://github.com/grzegorz914/homebridge-melcloud-control/issues/215)
 - added error sensor
@@ -527,19 +540,19 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.9.5] - (02.09.2025)
-## Changes
+### Changes
 - fix ERV start error
 ## [3.9.4] - (02.09.2025)
-## Changes
+### Changes
 - fix [#213](https://github.com/grzegorz914/homebridge-melcloud-control/issues/213)
 ## [3.9.0] - (18.08.2025)
-## Changes
+### Changes
 - Config UI CONECT TO MELCLOUD updated
   - automayically remove devices not existed in melcloud
@@ -549,7 +562,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.8.14] - (26.06.2025)
-## Changes
+### Changes
 - fix [#199](https://github.com/grzegorz914/homebridge-melcloud-control/issues/199)
 - fix [#205](https://github.com/grzegorz914/homebridge-melcloud-control/issues/205)
@@ -557,41 +570,41 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.8.13] - (26.06.2025)
-## Changes
+### Changes
 - fix [#206](https://github.com/grzegorz914/homebridge-melcloud-control/issues/206)
 ## [3.8.6] - (24.05.2025)
-## Changes
+### Changes
 - fix [#200](https://github.com/grzegorz914/homebridge-melcloud-control/issues/200)
 - cleanup
 ## [3.8.5] - (24.05.2025)
-## Changes
+### Changes
 - fix [#199](https://github.com/grzegorz914/homebridge-melcloud-control/issues/199)
 - cleanup
 ## [3.8.3] - (20.05.2025)
-## Changes
+### Changes
 - fix [#198](https://github.com/grzegorz914/homebridge-melcloud-control/issues/198)
 - cleanup
 ## [3.8.1] - (10.05.2025)
-## Changes
+### Changes
 - fix temperature sensors
 - cleanup
 ## [3.8.0] - (05.05.2025)
-## Changes
+### Changes
 - add possibility to hide individual zone accessory in Home app for ATW device, solved[#194](https://github.com/grzegorz914/homebridge-melcloud-control/issues/194)
 - publish sensors independent from hiden zones for ATW devices
@@ -603,25 +616,25 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.7.5] - (25.03.2025)
-## Changes
+### Changes
 - fix[#192](https://github.com/grzegorz914/homebridge-melcloud-control/issues/192), thanks @helloabunai
 ## [3.7.3] - (15.03.2025)
-## Changes
+### Changes
 - updated Homebridge UI interface
 ## [3.7.1] - (14.03.2025)
-## Changes
+### Changes
 - removed possibility to disable indyvidual accessory due to duplicated function with displayMode
 ## [3.7.0] - (13.03.2025)
-## Changes
+### Changes
 - added possibility to disable indyvidual accessory
 - bump dependencies
@@ -631,14 +644,14 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.6.9] - (28.02.2025)
-## Changes
+### Changes
 - fix[#191](https://github.com/grzegorz914/homebridge-melcloud-control/issues/191)
 - cleanup
 ## [3.6.7] - (26.02.2025)
-## Changes
+### Changes
 - bump dependencies
 - cleanup
@@ -646,31 +659,31 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.6.6] - (25.02.2025)
-## Changes
+### Changes
 - fix [#190](https://github.com/grzegorz914/homebridge-melcloud-control/issues/190)
 ## [3.6.4] - (09.02.2025)
-## Changes
+### Changes
 - fix plugin crash if config dosnt contain devices
 ## [3.6.3] - (07.02.2025)
-## Changes
+### Changes
 - stability and improvements
 ## [3.6.2] - (04.03.2025)
-## Changes
+### Changes
 - fix [#188](https://github.com/grzegorz914/homebridge-melcloud-control/issues/188)
 ## [3.6.1] - (29.01.2025)
-## Changes
+### Changes
 - refactor cnnect and reconnect code
 - refactor external integrations MQTT and RESTFul
@@ -679,7 +692,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.6.0] - (29.01.2025)
-## Changes
+### Changes
 - added possibility to disable/enable log success, info, warn, error
 - refactor cnnect code
@@ -690,7 +703,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.5.0] - (06.12.2024)
-## Changes
+### Changes
 - added possibility to set device refresh state indyvidually for every device
 - bump deependemcies
@@ -700,21 +713,21 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.4.4] - (05.12.2024)
-## Changes
+### Changes
 - fix [#184](https://github.com/grzegorz914/homebridge-melcloud-control/issues/184)
 - bump deependemcies
 ## [3.4.3] - (02.12.2024)
-## Changes
+### Changes
 - fix [#182](https://github.com/grzegorz914/homebridge-melcloud-control/issues/182)
 - cleanup
 ## [3.4.0] - (30.11.2024)
-## Changes
+### Changes
 - move from commonJS to esm module, fixing [#180](https://github.com/grzegorz914/homebridge-melcloud-control/issues/180)
 - moved constants.json to constants.js
@@ -722,21 +735,21 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.3.20] - (25.09.2024)
-## Changes
+### Changes
 - fix ATA characteristics warning after plugin restart if device in DRY or FAN mode
 - cleanup
 ## [3.3.19] - (25.09.2024)
-## Changes
+### Changes
 - fix apply presets for ATA
 - cleanup
 ## [3.3.18] - (25.09.2024)
-## Changes
+### Changes
 - fix get/set temperature during operation mode change for ATA
 - fix [#168](https://github.com/grzegorz914/homebridge-melcloud-control/issues/168)
@@ -744,7 +757,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.3.17] - (24.09.2024)
-## Changes
+### Changes
 - fix operation mode for ATA - Thermostat if device go to OFF
 - move some error to warn
@@ -752,7 +765,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.3.16] - (23.09.2024)
-## Changes
+### Changes
 - fix report wrong target mode if device is OFF and the plugin or bridge reboots
 - fix [#167](https://github.com/grzegorz914/homebridge-melcloud-control/issues/167)
@@ -760,21 +773,21 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.3.15] - (21.09.2024)
-## Changes
+### Changes
 - fix report wrong target temperature in Heat/Cool mode for ATA and ERV
 - cleanup
 ## [3.3.14] - (21.09.2024)
-## Changes
+### Changes
 - code improvements
 - cleanup
 ## [3.3.13] - (20.09.2024)
-## Changes
+### Changes
 - fix [#166](https://github.com/grzegorz914/homebridge-melcloud-control/issues/166)
 - readme update with explanation of AUTO mode in Heather/Cooler and Thermostat mode
@@ -782,14 +795,14 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.3.5] - (15.09.2024)
-## Changes
+### Changes
 - fix[#162](https://github.com/grzegorz914/homebridge-melcloud-control/issues/162)
 - cleanup
 ## [3.3.3] - (13.09.2024)
-## Changes
+### Changes
 - fix[#159](https://github.com/grzegorz914/homebridge-melcloud-control/issues/159)
 - fix [#158](https://github.com/grzegorz914/homebridge-melcloud-control/issues/158)
@@ -797,7 +810,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.3.2] - (13.09.2024)
-## Changes
+### Changes
 - corrct setProps for heating/cooling threshold
 - update ERV code to support heating/cooling threshold in auto mode
@@ -805,7 +818,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.3.1] - (13.09.2024)
-## Changes
+### Changes
 - fix update default Heating/Cooling characteristic temp
 - fix display current state of operation mode:
@@ -821,7 +834,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.3.0] - (12.09.2024)
-## Changes
+### Changes
 - added full support for AUTO mode with dead band, low and high temperature
 - fix some log info message
@@ -830,7 +843,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.2.0] - (11.09.2024)
-## Changes
+### Changes
 - added possibility to set previous value for buttons [#154](https://github.com/grzegorz914/homebridge-melcloud-control/issues/154)
 - move some message to warning
@@ -839,40 +852,40 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.1.11] - (09.09.2024)
-## Changes
+### Changes
 - cleanup
 ## [3.1.9] - (05.08.2024)
-## Changes
+### Changes
 - prevent load device if display mode set to 0 or unknown [#150](https://github.com/grzegorz914/homebridge-melcloud-control/issues/150)
 - cleanup
 ## [3.1.8] - (03.08.2024)
-## Changes
+### Changes
 - fix [#149](https://github.com/grzegorz914/homebridge-melcloud-control/issues/149)
 - cleanup
 ## [3.1.4] - (02.08.2024)
-## Changes
+### Changes
 - fix [#145](https://github.com/grzegorz914/homebridge-melcloud-control/issues/145)
 - cleanup
 ## [3.1.2] - (31.08.2024)
-## Changes
+### Changes
 - fix presets configured array
 ## [3.1.0] - (31.08.2024)
-## Changes
+### Changes
 - improvements in plugin config UI
 - added presets config indyvidually
@@ -882,7 +895,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.0.7] - (30.08.2024)
-## Changes
+### Changes
 - improvements in plugin config UI
 - config schema update
@@ -890,7 +903,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [3.0.0] - (29.08.2024)
-## Changes
+### Changes
 - added homebridge UI server
 - whole new concept get all devices from melcloud usin config UI X
@@ -900,7 +913,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [2.4.0] - (28.08.2024)
-## Changes
+### Changes
 - required upcomming homebridge 2.x.x required
 - bump dependencies
@@ -908,14 +921,14 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [2.3.3] - (28.08.2024)
-## Changes
+### Changes
 - cleanup and refactor accessory code
 - bump dependencies
 ## [2.3.0] - (25.08.2024)
-## Changes
+### Changes
 - removed from config.json `ataDisableAutoMode`, `ataDisableHeatMode`, `ataAutoHeatMode`
 - added to config.json `ataHeatDryFanMode`, `ataCoolDryFanMode`, `ataAutoDryFanMode`
@@ -926,7 +939,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [2.2.0] - (18.08.2024)
-## Changes
+### Changes
 - fix MQTT and RESTFul start
 - add control over RESTFul POST JSON Object
@@ -934,14 +947,14 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [2.1.1] - (18.08.2024)
-## Changes
+### Changes
 - fix correct catch error
 - log improvements
 ## [2.1.0] - (16.08.2024)
-## Changes
+### Changes
 - added possibility to set device state refresh inteval
 - rebuilt connect to melcloud code
@@ -952,7 +965,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [2.0.0] - (14.08.2024)
-## Changes
+### Changes
 - RestFul and MQTT refactor
 - bump dependencies
@@ -960,21 +973,21 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [1.1.4] - (14.08.2024)
-## Changes
+### Changes
 - hide passwords, tokens, serial numbers, by typing and display in Config UI
 - remove return duplicate promises from whole code
 ## [1.1.3] - (06.08.2024)
-## Changes
+### Changes
 - fix [#131](https://github.com/grzegorz914/homebridge-melcloud-control/issues/131)
 - bump dependencies
 ## [1.1.0] - (23.07.2024)
-## Changes
+### Changes
 - allow enable/disable every extra temperature sensor indyvidually [#126](https://github.com/grzegorz914/homebridge-melcloud-control/issues/126)
 - cleanup
@@ -982,7 +995,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [1.0.7] - (06.07.2024)
-## Changes
+### Changes
 - refactor buttons code
 - cleanup
@@ -990,35 +1003,29 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [1.0.1] - (22.06.2024)
-## Changes
+### Changes
 - check duplicate account name if run only one Homebridge instance
 - cleanup
 ## [1.0.0] - (21.06.2024)
-## Changes
+### Changes
 - added [#120](https://github.com/grzegorz914/homebridge-melcloud-control/issues/120) possibility run same device many times in other account or in other homebridge instance
-- cleanup
-## [1.0.0] - (21.06.2024)
-## Changes
 - added [#109](https://github.com/grzegorz914/homebridge-melcloud-control/issues/109), possibility filter out specific device and not exposed to the Homebridge/homekit by deviceId
-- cleanup
+- cleanup
 ## [0.21.0] - (25.03.2024)
-## Changes
+### Changes
 - added [#109](https://github.com/grzegorz914/homebridge-melcloud-control/issues/109), possibility filter out specific device and not exposed to the Homebridge/homekit by deviceId
 - cleanup
 ## [0.20.1] - (10.03.2024)
-## Changes
+### Changes
 - prevent set out of range temperature for Heat Pump
 - prevent set out of range temperature for Energy Recovery Ventilation
@@ -1026,7 +1033,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.20.0] - (10.03.2024)
-## Changes
+### Changes
 - dynamically update temp unit
 - prevent set out of range temperature for Air Conditioner
@@ -1034,14 +1041,14 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.19.0] - (02.03.2024)
-## Changes
+### Changes
 - added support to control devices over MQTT protocol
 - cleanup
 ## [0.18.0] - (02.03.2024)
-## Changes
+### Changes
 - added temperature sensors for heat pump, flow, return, zone 1, zone 2, water tank
 - fix [#91](https://github.com/grzegorz914/homebridge-melcloud-control/issues/91), thanks @alesf
@@ -1053,7 +1060,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.17.0] - (01.03.2024)
-## Changes
+### Changes
 - added outdoor/room temperature sensors for Air Conditioner if supported
 - added outdoor/room/supply temperature sensors for Losnay if supported
@@ -1063,7 +1070,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.16.0] - (10.02.2024)
-## Changes
+### Changes
 - removed possibility to set indyvidual refresh time for ATA, ATW, ERV state
 - full code refactor for ATA, ATW, ERV
@@ -1075,7 +1082,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.15.0] - (05.02.2024)
-## Changes
+### Changes
 - added possibility to set indyvidual refresh time for Account Settings and ATA, ATW, ERV state, [#68](https://github.com/grzegorz914/homebridge-melcloud-control/issues/68)
 - config.schema updated
@@ -1083,14 +1090,14 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.14.1] - (06.01.2024)
-## Changes
+### Changes
 - added possibility to enable/disable the accessory name as a prefix for button/sensor name
 - config.schema updated
 ## [0.14.0] - (06.01.2024)
-## Changes
+### Changes
 - added mode SPLIT to Vane V [#62](https://github.com/grzegorz914/homebridge-melcloud-control/issues/62)
 - fix Vane V mode assignment for buttons/sensors
@@ -1099,7 +1106,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.13.0] - (30.07.2023)
-## Changes
+### Changes
 - added RESTFul server
 - code refactor and cleanup
@@ -1107,7 +1114,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.12.0] - (21.07.2023)
-## Changes
+### Changes
 - added extra temperature sensor for Heater/Cooler control mode to use with automations
 - config.schema updeted
@@ -1115,7 +1122,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.11.0] - (25.03.2023)
-## Changes
+### Changes
 - full support of ERV Lossnay, fix [#37](https://github.com/grzegorz914/homebridge-melcloud-control/issues/37)
 - added core maintenance indicator for ERV LOSSNAY
@@ -1126,7 +1133,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.10.0] - (15.03.2023)
-## Changes
+### Changes
 - added filter maintenance indicator for ERV LOSSNAY
 - config.schema updated
@@ -1134,7 +1141,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.9.0] - (14.03.2023)
-## Changes
+### Changes
 - changed properties in config.json from `ataHeatMode` to `ataAutoHeatMode`
 - updated selectable options for `ataAutoHeatMode` to `DRY/FAN`, `FAN/DRY`
@@ -1145,7 +1152,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.8.0] - (13.03.2023)
-## Changes
+### Changes
 - added possibility selec mode DRY/FAN for Heat if Heat not supported by device
 - config.schema updated
@@ -1153,20 +1160,20 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.7.1] - (13.03.2023)
-## Changes
+### Changes
 - cleanup
 ## [0.7.0] - (12.03.2023)
-## Changes
+### Changes
 - added for Air Conditioner DRY operating mode if HEAT not supported or FAN if DRY not supported too
 - cleanup
 ## [0.6.0] - (08.03.2023)
-## Changes
+### Changes
 - added full support for Heat Pump control, thanks @Reliktdragons for testing
 - fixed MQTT client
@@ -1176,7 +1183,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.5.0] - (02.02.2023)
-## Changes
+### Changes
 - added None/Contact/Motion/Occupancy Sensor for displayType in the buttons/sensors section
 - code refactor and fixes
@@ -1186,27 +1193,27 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.4.5] - (02.01.2023)
-## Changes
+### Changes
 - code refactor
 - small fixes in fan speeds
 ## [0.4.4] - (31.12.2022)
-## Changes
+### Changes
 - bump dependencies
 ## [0.4.3] - (06.12.2022)
-## Changes Homebridge >= 1.6
+### Changes Homebridge >= 1.6
 - fix characteristic was supplied illegal value: number 0 exceeded minimum of 10
 - bump dependencies
 ## [0.4.2] - (15.10.2022)
-## Changes
+### Changes
 - code cleanup
 - fixed display wrong current state for Heat Pump in log
@@ -1223,7 +1230,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.4.1] - (21.09.2022)
-## Changes
+### Changes
 - removed mode AUTO for Energy Recovery Ventilation if device not support it
 - removed mode AUTO for Air Conditioner if device not support it
@@ -1233,14 +1240,14 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.4.0] - (21.09.2022)
-## Changes
+### Changes
 - added possibility individually configure (control mode, presets and buttons) for devices of same type
 - update config.schema json
 ## [0.3.2] - (20.09.2022)
-## Changes
+### Changes
 - fixed many bugs in Heat Pump, thanks user @choooli for patience and tests
 - fixed some bugs in Enrgy Recovery Ventilation (Test phase)
@@ -1249,14 +1256,14 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.3.1] - (29.08.2022)
-## Changes
+### Changes
 - code cleanup
 - mqtt topics standarization
 ## [0.3.0] - (27.08.2022)
-## Changes
+### Changes
 - code cleanup and rebuild
 - stability improvements
@@ -1269,27 +1276,27 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.2.16] - (24.07.2022)
-## Changes
+### Changes
 - fix node.js warning
 - bump minimum version of hombridge to v1.4
 ## [0.2.15] - (24.07.2022)
-## Changes
+### Changes
 - code cleanup
 - code rebuild
 ## [0.2.14] - (23.07.2022)
-## Changes
+### Changes
 - update accessory display name and type
 ## [0.2.12] - (23.07.2022)
-## Changes
+### Changes
 - code rebuild and cleanup
 - reduced MELCloud backroground refresh data to 30sec
@@ -1297,7 +1304,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.2.11] - (22.07.2022)
-## Changes
+### Changes
 - fixed [#7](https://github.com/grzegorz914/homebridge-melcloud-control/issues/7)
 - fixed [#8](https://github.com/grzegorz914/homebridge-melcloud-control/issues/8)
@@ -1307,7 +1314,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.2.10] - (05.07.2022)
-## Changes
+### Changes
 - added auto detection of device support standby mode
 - some logs cosmetics changes
@@ -1315,45 +1322,45 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.2.9] - (04.07.2022)
-## Changes
+### Changes
 - fix [#6](https://github.com/grzegorz914/homebridge-melcloud-control/issues/6)
 - added auto detection of device support automatic fan speed mode and detect numbers of fan speeds
 ## [0.2.8] - (03.07.2022)
-## Changes
+### Changes
 - fix Rotation Speed warning
 ## [0.2.7] - (03.07.2022)
-## Changes
+### Changes
 - fix sometimes device switch off if set new temp
 ## [0.2.6] - (03.07.2022)
-## Changes
+### Changes
 - fix [#4](https://github.com/grzegorz914/homebridge-melcloud-control/issues/4)
 - fix [#5](https://github.com/grzegorz914/homebridge-melcloud-control/issues/5)
 ## [0.2.5] - (02.07.2022)
-## Changes
+### Changes
 - fix setProp step for celsius
 ## [0.2.4] - (02.07.2022)
-## Changes
+### Changes
 - fix heating cooling threshold warning
 ## [0.2.3] - (27.06.2022)
-## Changes
+### Changes
 - removed vane H and V tilt angle characteristics from accessory, the data is not available on MELCloud api
 - stability improvements
@@ -1361,13 +1368,13 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.2.2] - (27.06.2022)
-## Changes
+### Changes
 - fix select button mone abowe as 9
 ## [0.2.1] - (27.06.2022)
-## Changes
+### Changes
 - config schema updated
 - readme updated
@@ -1381,19 +1388,19 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 - control vane V all modes with buttons
 - control fan speed all modes with buttons
-## Changes
+### Changes
 - code cleanup
 ## [0.1.2] - (26.06.2022)
-## Changes
+### Changes
 - rebuilded refresch device state
 ## [0.1.1] - (26.06.2022)
-## Changes
+### Changes
 - added lock physical controls for Heater/Cooler accessory
 - fix display undefined value for fan speed mode in log
@@ -1401,7 +1408,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.1.0] - (26.06.2022)
-## Changes
+### Changes
 - full code rebuild
 - fix display buttons state
@@ -1410,38 +1417,38 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.0.11] - (20.06.2022)
-## Changes
+### Changes
 - fix update state of buttons
 ## [0.0.10] - (20.06.2022)
-## Changes
+### Changes
 - fix add all operating mode for buttons
 ## [0.0.9] - (20.06.2022)
-## Changes
+### Changes
 - added possibility to set all modes using extra buttons fix [#2](https://github.com/grzegorz914/homebridge-melcloud-control/issues/2)
 ## [0.0.8] - (19.06.2022)
-## Changes
+### Changes
 - code cleanup
 ## [0.0.7] - (19.06.2022)
-## Changes
+### Changes
 - fix warning for DefaultHeatingSetTemperature
 - code cleanup
 ## [0.0.6] - (19.06.2022)
-## Changes
+### Changes
 - fix set Target Temperature in Auto Mode
 - prepare for Heat Pump and Energy Recovery Ventilation
@@ -1449,7 +1456,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.0.5] - (19.06.2022)
-## Changes
+### Changes
 - fix parse building structure and read devices [#1](https://github.com/grzegorz914/homebridge-melcloud-control/issues/1)
 - fix set Temperature treshold
@@ -1458,24 +1465,24 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 ## [0.0.4] - (18.06.2022)
-## Changes
+### Changes
 - first working version
 ## [0.0.3] - (18.06.2022)
-## Changes
+### Changes
 - test release 3
 ## [0.0.2] - (17.06.2022)
-## Changes
+### Changes
 - test release 2
 ## [0.0.1] - (16.06.2022)
-## Changes
+### Changes
 - test release