homebridge-dyson-solarcycle-morph 0.1.0

package/CHANGELOG.md

@@ -0,0 +1,52 @@
+# Changelog
+
+All notable changes to this project are documented here.
+
+The format follows [Keep a Changelog](https://keepachangelog.com/en/1.1.0/),
+and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+
+## [0.1.0] — 2026-09-17
+
+First release. Verified end to end against a Solarcycle Morph desk light
+(model CD06) on Raspberry Pi OS Bookworm, BlueZ 5.66, Homebridge 2.4.
+
+### Added
+
+- A settings page in the Homebridge UI that scans for nearby lights, authorises
+  a MyDyson account and pairs them, replacing the need to run anything by hand.
+- Credentials are stored in the plugin's storage directory rather than in
+  `config.json`, so the file the UI displays holds nothing sensitive. Setting
+  `ltk` and `accountId` in the config still works and takes precedence.
+- Signal strength is logged on connect, with a warning below −80 dBm — the point
+  where BLE supervision timeouts make a link drop repeatedly.
+
+- HomeKit lightbulb with on/off, brightness and colour temperature (2700–6500 K).
+- Optional motion sensor from the lamp's built-in detector.
+- Offline LTK re-authentication, run on every connect. No network access after
+  pairing.
+- `dyson-morph-pair`, the same flow from a terminal, for setups without the
+  Homebridge UI.
+- `tools/ble-probe.js`, a standalone GATT dump for inspecting a lamp without
+  installing the plugin.
+- Reconnect with backoff, state followed through notifications, and the lamp
+  reported as unreachable in HomeKit while there is no link.
+- Power commands are checked and resent if they did not land. Brightness and
+  colour temperature are not: the lamp ramps and trims them itself, so a reading
+  that differs from the request is usually the lamp working.
+
+### Requirements
+
+- Homebridge 2.x. The plugin is ESM, matching Homebridge 2's own module format.
+
+### Notes on the protocol
+
+Probing real hardware contradicted the published protocol notes in two places,
+both handled here rather than assumed away:
+
+- Characteristics are spread across three GATT services, not gathered under one.
+  Discovery sweeps every service and matches on characteristic UUID.
+- Acknowledged writes are described as mandatory, but this lamp advertises no
+  `write` flag at all and unacknowledged writes do take effect. The write mode
+  is taken from each characteristic's advertised flags.
+
+See [docs/PROTOCOL.md](docs/PROTOCOL.md).

package/LICENSE

@@ -0,0 +1,22 @@
+MIT License
+
+Copyright (c) 2026 Oliver Rummeyer
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+

package/README.md

@@ -0,0 +1,259 @@
+# homebridge-dyson-solarcycle-morph
+
+Homebridge plugin for the **Dyson Solarcycle Morph** and **Lightcycle Morph**
+task lights (model CD06).
+
+These lamps have no Wi-Fi. Everything goes over Bluetooth LE, so the machine
+running Homebridge has to be within Bluetooth range of the lamp — there is no
+cloud path to fall back on.
+
+Exposes a HomeKit lightbulb with on/off, brightness and colour temperature
+(2700–6500 K), plus the lamp's built-in motion sensor if you want it.
+
+## Before you start
+
+**Your lamp must already be registered in the MyDyson app, on the account you
+are going to log in with.** This is not optional and it is worth explaining why,
+because it is the one thing that can stop you dead.
+
+The lamp ignores every command until a challenge-response handshake proves you
+hold its *long-term key* (LTK). That key is issued by Dyson, tied to the account
+the lamp is registered to, and there is no way to derive it from the device
+itself. Pairing here fetches it once from the Dyson cloud. If the lamp is not on
+your account, the endpoint returns 404 and there is nothing this plugin can do.
+
+The only other way to get an LTK is Dyson's "fresh pairing" handshake, which
+needs a physical button press on the lamp *and* a working cloud session — this
+plugin does not implement it. So: open the MyDyson app, make sure the lamp is
+there, then continue.
+
+Everything after pairing is local. The plugin never touches the network again.
+
+## Requirements
+
+- A Linux host with BlueZ — a Raspberry Pi running Homebridge is the usual case.
+  This uses [`node-ble`](https://github.com/chrvadala/node-ble), which talks to
+  BlueZ over D-Bus, so **macOS and Windows will not work**.
+- Node.js 20.19+ / 22.12+ / 24+.
+- Homebridge 2.x.
+
+Developed and verified against a Solarcycle Morph desk light on Raspberry Pi OS
+Bookworm, BlueZ 5.66, Homebridge 2.4.
+
+## 1. Find the lamp
+
+```sh
+sudo bluetoothctl --timeout 15 scan le
+```
+
+Look for a device whose name is a Dyson serial, something like
+`ABC-EU-XXXXXXXX`. **The lamp advertises its serial number as its Bluetooth
+name**, so this one command gives you both values you need:
+
+```sh
+bluetoothctl info AA:BB:CC:DD:EE:FF
+```
+
+```
+Device AA:BB:CC:DD:EE:FF (random)
+        Name: ABC-EU-XXXXXXXX          ← serial number
+        UUID: Vendor specific    (2dd10010-1c37-452d-8979-d1b4a787d0a4)
+```
+
+That `2dd10010` service UUID confirms it is a Dyson light speaking the protocol
+this plugin implements.
+
+## 2. Install
+
+```sh
+sudo npm install -g homebridge-dyson-solarcycle-morph
+```
+
+On a Homebridge installation managed by `hb-service` (the official Raspberry Pi
+image and apt package), plugins live in the Homebridge storage directory rather
+than in npm's global prefix. Install it there instead:
+
+```sh
+cd /var/lib/homebridge
+sudo -u homebridge /opt/homebridge/bin/npm install homebridge-dyson-solarcycle-morph
+```
+
+Installing into the wrong prefix is a quiet failure: npm reports success and
+Homebridge never sees the plugin.
+
+## 3. Pair, in the Homebridge UI
+
+Open the plugin's settings. The page walks through three things:
+
+1. **Scan for lights.** Finds nearby Dyson lights and adds them to the
+   configuration, filling in the address and serial number for you. You can skip
+   this and type them by hand if you already did step 1.
+2. **Authorise your MyDyson account.** Enter your email, password and country,
+   request a code, and enter the code Dyson emails you.
+3. **Check the result.** Paired lights are listed with the date they were
+   authorised, and can be un-paired again.
+
+Save the configuration and restart Homebridge.
+
+**The key never enters `config.json`.** It is written to the plugin's own
+storage directory, so the file you can open in the UI — and paste into a support
+thread — contains nothing sensitive.
+
+### Without the Homebridge UI
+
+`dyson-morph-pair` does the same thing from a terminal:
+
+```sh
+dyson-morph-pair --serial ABC-EU-XXXXXXXX --country DE
+```
+
+Pass `--storage` if your Homebridge storage directory is not `~/.homebridge`,
+and `--debug` to see every request and response.
+
+**Run it in a real terminal.** It reads from stdin interactively, so launching
+it from an editor, an agent or a CI shell prints the prompts but never receives
+your answers — every field arrives empty and Dyson rejects the login with a
+misleading `401 Unable to authenticate user`.
+
+## 4. Configure
+
+Scanning writes this for you; by hand it looks like:
+
+```json
+{
+  "platform": "DysonSolarcycleMorph",
+  "lights": [
+    {
+      "name": "Desk Light",
+      "mac": "AA:BB:CC:DD:EE:FF",
+      "serial": "ABC-EU-XXXXXXXX",
+      "motionSensor": true
+    }
+  ]
+}
+```
+
+| Field | |
+|---|---|
+| `name` | What the lamp is called in HomeKit. |
+| `mac` | BLE address from the scan. |
+| `serial` | Identifies the accessory to HomeKit and keys its stored credentials. |
+| `motionSensor` | Expose the lamp's motion detector as a HomeKit sensor. Default `false`. |
+
+Credentials are not configured here. For an unattended setup you may still set
+`ltk` and `accountId` explicitly, and they then take precedence over anything
+stored — supply both or neither.
+
+**Running it as a child bridge is recommended.** Bluetooth links drop and
+reconnect; in a child bridge that churn stays isolated from your other
+accessories. In the Homebridge UI it is one toggle under the plugin's settings.
+
+## Troubleshooting
+
+**`le-connection-abort-by-local` a few times at startup.** Expected. BlueZ
+commonly aborts the first two or three attempts before one sticks. The plugin
+retries with backoff (2 s, 5 s, 15 s, 30 s, then 60 s) and normally connects
+within a minute. Only worry if it never succeeds.
+
+**It connects, drops after a few seconds, and reconnects, over and over.**
+Usually the radio link, not the software. The plugin logs the signal strength
+when it connects and warns below about −80 dBm; at that level BLE hits its
+supervision timeout and the link dies. Check it directly with:
+
+```sh
+sudo bluetoothctl info AA:BB:CC:DD:EE:FF | grep RSSI
+```
+
+−60 dBm is comfortable, −75 is workable, −85 will not hold. Move the lamp or the
+Homebridge host closer to each other, or put a Bluetooth adapter nearer the lamp.
+
+**It keeps failing with `le-connection-abort-by-local` and never connects.**
+The lamp's Bluetooth stack can reach a state where it advertises normally — a
+scan finds it, at a good signal strength — but refuses every connection.
+**Disconnecting the lamp from power for ten seconds clears it**, reliably, and
+nothing on the Homebridge side does. The plugin keeps retrying and thins the
+attempts out to five minutes apart, so it will pick the lamp up again by itself
+once you have done that.
+
+**Everything reports `Operation Not Authorized`.** The handshake did not
+complete. Look for `Handshake with … complete` in the log.
+
+**`… is not paired yet`.** No key is stored for that serial. Open the plugin's
+settings in the Homebridge UI and authorise your account there. Check the serial
+matches the lamp exactly — it is what the stored key is filed under.
+
+**`PayloadB failed HMAC verification`.** The stored LTK is wrong or corrupted.
+Re-run `dyson-morph-pair`.
+
+**404 when fetching the LTK.** The lamp is not registered to that Dyson account.
+See *Before you start*.
+
+**`Not authorized` from D-Bus, or nothing connects at all.** Only relevant if
+your distribution restricts BlueZ access — Debian Bookworm and Raspberry Pi OS
+already allow it for all users, so this is usually *not* your problem. If it is,
+create `/etc/dbus-1/system.d/node-ble.conf`, replacing `homebridge` with the
+user Homebridge runs as, then `sudo systemctl restart dbus`:
+
+```xml
+<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
+<busconfig>
+  <policy user="homebridge">
+    <allow own="org.bluez"/>
+    <allow send_destination="org.bluez"/>
+    <allow send_interface="org.bluez.GattCharacteristic1"/>
+    <allow send_interface="org.bluez.GattDescriptor1"/>
+    <allow send_interface="org.freedesktop.DBus.ObjectManager"/>
+    <allow send_interface="org.freedesktop.DBus.Properties"/>
+  </policy>
+</busconfig>
+```
+
+**The Home app shows the lamp as "No Response".** There is no Bluetooth link
+right now. Commands are not queued while that is the case: they fail, so you
+know they did not happen. The plugin reconnects on its own and reads the lamp's
+real state when it does.
+
+**The brightness I set is not exactly what the lamp shows.** Expected. The lamp
+ramps towards a value rather than jumping, and trims it to track daylight from
+its location and the time. Only power is checked and resent, because it is the
+only value whose outcome is unambiguous — see
+[docs/PROTOCOL.md](docs/PROTOCOL.md).
+
+**Daylight mode changed at the lamp is not reflected.** The lamp lets you write
+that setting but not read it back, so the plugin cannot know. It re-asserts
+manual mode before writes to keep control predictable.
+
+### Inspecting the lamp yourself
+
+`tools/ble-probe.js` dumps every service, characteristic, flag and notification,
+with no build step and no plugin install:
+
+```sh
+npm install node-ble
+node tools/ble-probe.js AA:BB:CC:DD:EE:FF
+```
+
+Useful for checking a model this plugin has not been tried against.
+
+## Protocol
+
+See [docs/PROTOCOL.md](docs/PROTOCOL.md) for the GATT layout, the message
+framing and the handshake, including where a real lamp disagreed with the
+published notes.
+
+Reverse-engineered from the MyDyson Android app by S-Termi and documented in
+[cmgrayb/hass-dyson](https://github.com/cmgrayb/hass-dyson). This plugin is an
+independent TypeScript implementation, cross-checked against that reference with
+`npm test`.
+
+## Development
+
+See [CONTRIBUTING.md](CONTRIBUTING.md) for the build, how to try a change on
+real hardware, and how releases are published.
+
+Not affiliated with or endorsed by Dyson.
+
+## License
+
+MIT — see [LICENSE](LICENSE).

package/config.schema.json

@@ -0,0 +1,118 @@
+{
+  "pluginAlias": "DysonSolarcycleMorph",
+  "pluginType": "platform",
+  "singular": true,
+  "headerDisplay": "Controls the Bluetooth-only Dyson Solarcycle / Lightcycle Morph.\n\n**The lamp must be registered in the MyDyson app.** Its key is issued by Dyson against the account the lamp belongs to and cannot be read from the device itself.",
+  "schema": {
+    "type": "object",
+    "properties": {
+      "name": {
+        "title": "Name",
+        "type": "string",
+        "default": "Dyson Solarcycle Morph",
+        "required": true,
+        "description": "Shown in the Homebridge log in front of this plugin\u2019s messages."
+      },
+      "adapter": {
+        "title": "Bluetooth adapter",
+        "type": "string",
+        "required": false,
+        "placeholder": "hci0",
+        "description": "Leave empty to use the system default adapter."
+      },
+      "lights": {
+        "title": "Lights",
+        "type": "array",
+        "items": {
+          "type": "object",
+          "properties": {
+            "name": {
+              "title": "Name",
+              "type": "string",
+              "required": true,
+              "default": "Dyson Morph"
+            },
+            "mac": {
+              "title": "BLE MAC address",
+              "type": "string",
+              "required": true,
+              "placeholder": "AA:BB:CC:DD:EE:FF",
+              "pattern": "^([0-9A-Fa-f]{2}:){5}[0-9A-Fa-f]{2}$"
+            },
+            "serial": {
+              "title": "Serial number",
+              "type": "string",
+              "required": true,
+              "description": "Printed on the lamp base and shown in the MyDyson app."
+            },
+            "motionSensor": {
+              "title": "Expose the motion sensor",
+              "type": "boolean",
+              "default": false,
+              "description": "Adds the lamp's built-in motion detector as a HomeKit motion sensor."
+            }
+          }
+        }
+      },
+      "dysonAccount": {
+        "type": "object",
+        "properties": {
+          "email": {
+            "type": "string",
+            "title": "MyDyson email"
+          },
+          "password": {
+            "type": "string",
+            "title": "MyDyson password"
+          },
+          "country": {
+            "type": "string",
+            "title": "Country",
+            "maxLength": 2,
+            "default": "GB"
+          }
+        }
+      }
+    }
+  },
+  "customUi": true,
+  "customUiPath": "./homebridge-ui",
+  "footerDisplay": "Lamp keys are stored in the plugin's storage directory, never in config.json. Your MyDyson password is only needed while authorising \u2014 clear it afterwards.",
+  "layout": [
+    "name",
+    {
+      "type": "fieldset",
+      "title": "Lights",
+      "expandable": true,
+      "expanded": true,
+      "items": [
+        {
+          "key": "lights",
+          "type": "array",
+          "add": "Add light",
+          "items": [
+            {
+              "type": "div",
+              "displayFlex": true,
+              "flex-direction": "column",
+              "items": [
+                "lights[].name",
+                "lights[].mac",
+                "lights[].serial",
+                "lights[].motionSensor"
+              ]
+            }
+          ]
+        }
+      ]
+    },
+    {
+      "type": "fieldset",
+      "title": "Advanced",
+      "expandable": true,
+      "items": [
+        "adapter"
+      ]
+    }
+  ]
+}

package/dist/accessory.d.ts

@@ -0,0 +1,41 @@
+import type { PlatformAccessory } from 'homebridge';
+import type { ResolvedLightConfig } from './config.js';
+import type { MorphPlatform } from './platform.js';
+/**
+ * Bridges one lamp's BLE session to its HomeKit services.
+ *
+ * Writes are optimistic — HomeKit's 10-second characteristic timeout is shorter
+ * than a BLE reconnect, so a command issued while the lamp is away would
+ * otherwise surface as an error in the Home app. Instead we let the lamp's own
+ * state events correct us once it comes back.
+ */
+export declare class MorphAccessory {
+    private readonly platform;
+    private readonly accessory;
+    private readonly config;
+    private readonly lightbulb;
+    private readonly motion?;
+    private readonly lamp;
+    constructor(platform: MorphPlatform, accessory: PlatformAccessory, config: ResolvedLightConfig);
+    start(): Promise<void>;
+    stop(): Promise<void>;
+    /**
+     * Answer only while the lamp is actually reachable.
+     *
+     * Without this HomeKit keeps showing whatever was last known — a lamp that
+     * has been unreachable for minutes still reads as on at 100%, which is worse
+     * than saying nothing. Throwing a communication failure is how an accessory
+     * reports itself as unavailable, and the Home app shows "No Response".
+     */
+    private live;
+    /** Push "No Response" to every characteristic at once. */
+    private markUnreachable;
+    /**
+     * Apply a write, reporting failure to HomeKit rather than swallowing it.
+     *
+     * A command that cannot be delivered is not retried later, so the Home app
+     * has to say so — otherwise it shows the new value as though it had taken
+     * effect and the user has no way to tell that nothing happened.
+     */
+    private handleSet;
+}

package/dist/accessory.js

@@ -0,0 +1,129 @@
+import { describeError } from './errors.js';
+import { DysonMorphLamp } from './dyson/lamp.js';
+import { kelvinToMired, miredToKelvin, MAX_KELVIN, MIN_KELVIN } from './dyson/protocol.js';
+/**
+ * Bridges one lamp's BLE session to its HomeKit services.
+ *
+ * Writes are optimistic — HomeKit's 10-second characteristic timeout is shorter
+ * than a BLE reconnect, so a command issued while the lamp is away would
+ * otherwise surface as an error in the Home app. Instead we let the lamp's own
+ * state events correct us once it comes back.
+ */
+export class MorphAccessory {
+    platform;
+    accessory;
+    config;
+    lightbulb;
+    motion;
+    lamp;
+    constructor(platform, accessory, config) {
+        this.platform = platform;
+        this.accessory = accessory;
+        this.config = config;
+        const { Service, Characteristic } = this.platform.api.hap;
+        this.lamp = new DysonMorphLamp({
+            mac: config.mac,
+            ltk: config.ltk,
+            accountId: config.accountId,
+            adapter: platform.config.adapter,
+            log: platform.log,
+        });
+        (this.accessory.getService(Service.AccessoryInformation) ?? this.accessory.addService(Service.AccessoryInformation))
+            .setCharacteristic(Characteristic.Manufacturer, 'Dyson')
+            .setCharacteristic(Characteristic.Model, 'Solarcycle Morph')
+            .setCharacteristic(Characteristic.SerialNumber, config.serial);
+        this.lightbulb =
+            this.accessory.getService(Service.Lightbulb) ?? this.accessory.addService(Service.Lightbulb, config.name);
+        this.lightbulb.setCharacteristic(Characteristic.Name, config.name);
+        this.lightbulb
+            .getCharacteristic(Characteristic.On)
+            .onGet(() => this.live(() => this.lamp.getState().on))
+            .onSet((value) => this.handleSet('power', () => this.lamp.setPower(value)));
+        this.lightbulb
+            .getCharacteristic(Characteristic.Brightness)
+            .onGet(() => this.live(() => this.lamp.getState().brightness))
+            .onSet((value) => this.handleSet('brightness', () => this.lamp.setBrightness(value)));
+        this.lightbulb
+            .getCharacteristic(Characteristic.ColorTemperature)
+            // HomeKit works in mireds, which run inverse to Kelvin.
+            .setProps({ minValue: kelvinToMired(MAX_KELVIN), maxValue: kelvinToMired(MIN_KELVIN) })
+            .onGet(() => this.live(() => kelvinToMired(this.lamp.getState().kelvin)))
+            .onSet((value) => this.handleSet('colour temperature', () => this.lamp.setColorTemperature(miredToKelvin(value))));
+        // Tell HomeKit the moment the link goes, rather than leaving it showing the
+        // last value as though it were current.
+        this.lamp.on('disconnected', () => this.markUnreachable());
+        this.lamp.on('connected', () => {
+            const state = this.lamp.getState();
+            this.lightbulb.updateCharacteristic(Characteristic.On, state.on);
+            this.lightbulb.updateCharacteristic(Characteristic.Brightness, state.brightness);
+            this.lightbulb.updateCharacteristic(Characteristic.ColorTemperature, kelvinToMired(state.kelvin));
+        });
+        if (config.motionSensor) {
+            this.motion =
+                this.accessory.getService(Service.MotionSensor) ??
+                    this.accessory.addService(Service.MotionSensor, `${config.name} Motion`);
+            this.motion
+                .getCharacteristic(Characteristic.MotionDetected)
+                .onGet(() => this.live(() => this.motion?.getCharacteristic(Characteristic.MotionDetected).value ?? false));
+            this.lamp.on('motion', (detected) => {
+                this.motion?.updateCharacteristic(Characteristic.MotionDetected, detected);
+            });
+        }
+        this.lamp.on('state', (state) => {
+            this.lightbulb.updateCharacteristic(Characteristic.On, state.on);
+            this.lightbulb.updateCharacteristic(Characteristic.Brightness, state.brightness);
+            this.lightbulb.updateCharacteristic(Characteristic.ColorTemperature, kelvinToMired(state.kelvin));
+        });
+    }
+    async start() {
+        try {
+            await this.lamp.start();
+        }
+        catch (error) {
+            this.platform.log.error(`Could not start BLE session for ${this.config.name}: ${describeError(error)}`);
+        }
+    }
+    async stop() {
+        await this.lamp.stop();
+    }
+    /**
+     * Answer only while the lamp is actually reachable.
+     *
+     * Without this HomeKit keeps showing whatever was last known — a lamp that
+     * has been unreachable for minutes still reads as on at 100%, which is worse
+     * than saying nothing. Throwing a communication failure is how an accessory
+     * reports itself as unavailable, and the Home app shows "No Response".
+     */
+    live(read) {
+        if (!this.lamp.isConnected()) {
+            throw new this.platform.api.hap.HapStatusError(-70402 /* this.platform.api.hap.HAPStatus.SERVICE_COMMUNICATION_FAILURE */);
+        }
+        return read();
+    }
+    /** Push "No Response" to every characteristic at once. */
+    markUnreachable() {
+        const { Characteristic } = this.platform.api.hap;
+        const error = new Error(`${this.config.name} is not reachable over Bluetooth`);
+        for (const characteristic of [Characteristic.On, Characteristic.Brightness, Characteristic.ColorTemperature]) {
+            this.lightbulb.updateCharacteristic(characteristic, error);
+        }
+        this.motion?.updateCharacteristic(Characteristic.MotionDetected, error);
+    }
+    /**
+     * Apply a write, reporting failure to HomeKit rather than swallowing it.
+     *
+     * A command that cannot be delivered is not retried later, so the Home app
+     * has to say so — otherwise it shows the new value as though it had taken
+     * effect and the user has no way to tell that nothing happened.
+     */
+    async handleSet(what, apply) {
+        try {
+            await apply();
+        }
+        catch (error) {
+            this.platform.log.warn(`Setting ${what} on ${this.config.name} failed: ${describeError(error)}`);
+            throw new this.platform.api.hap.HapStatusError(-70402 /* this.platform.api.hap.HAPStatus.SERVICE_COMMUNICATION_FAILURE */);
+        }
+    }
+}
+//# sourceMappingURL=accessory.js.map

package/dist/accessory.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"accessory.js","sourceRoot":"","sources":["../src/accessory.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,aAAa,EAAE,MAAM,aAAa,CAAC;AAI5C,OAAO,EAAE,cAAc,EAAE,MAAM,iBAAiB,CAAC;AACjD,OAAO,EAAE,aAAa,EAAE,aAAa,EAAE,UAAU,EAAE,UAAU,EAAE,MAAM,qBAAqB,CAAC;AAG3F;;;;;;;GAOG;AACH,MAAM,OAAO,cAAc;IAMN;IACA;IACA;IAPF,SAAS,CAAU;IACnB,MAAM,CAAW;IACjB,IAAI,CAAiB;IAEtC,YACmB,QAAuB,EACvB,SAA4B,EAC5B,MAA2B;QAF3B,aAAQ,GAAR,QAAQ,CAAe;QACvB,cAAS,GAAT,SAAS,CAAmB;QAC5B,WAAM,GAAN,MAAM,CAAqB;QAE5C,MAAM,EAAE,OAAO,EAAE,cAAc,EAAE,GAAG,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,GAAG,CAAC;QAE1D,IAAI,CAAC,IAAI,GAAG,IAAI,cAAc,CAAC;YAC7B,GAAG,EAAE,MAAM,CAAC,GAAG;YACf,GAAG,EAAE,MAAM,CAAC,GAAG;YACf,SAAS,EAAE,MAAM,CAAC,SAAS;YAC3B,OAAO,EAAE,QAAQ,CAAC,MAAM,CAAC,OAAO;YAChC,GAAG,EAAE,QAAQ,CAAC,GAAG;SAClB,CAAC,CAAC;QAEH,CAAC,IAAI,CAAC,SAAS,CAAC,UAAU,CAAC,OAAO,CAAC,oBAAoB,CAAC,IAAI,IAAI,CAAC,SAAS,CAAC,UAAU,CAAC,OAAO,CAAC,oBAAoB,CAAC,CAAC;aACjH,iBAAiB,CAAC,cAAc,CAAC,YAAY,EAAE,OAAO,CAAC;aACvD,iBAAiB,CAAC,cAAc,CAAC,KAAK,EAAE,kBAAkB,CAAC;aAC3D,iBAAiB,CAAC,cAAc,CAAC,YAAY,EAAE,MAAM,CAAC,MAAM,CAAC,CAAC;QAEjE,IAAI,CAAC,SAAS;YACZ,IAAI,CAAC,SAAS,CAAC,UAAU,CAAC,OAAO,CAAC,SAAS,CAAC,IAAI,IAAI,CAAC,SAAS,CAAC,UAAU,CAAC,OAAO,CAAC,SAAS,EAAE,MAAM,CAAC,IAAI,CAAC,CAAC;QAC5G,IAAI,CAAC,SAAS,CAAC,iBAAiB,CAAC,cAAc,CAAC,IAAI,EAAE,MAAM,CAAC,IAAI,CAAC,CAAC;QAEnE,IAAI,CAAC,SAAS;aACX,iBAAiB,CAAC,cAAc,CAAC,EAAE,CAAC;aACpC,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,QAAQ,EAAE,CAAC,EAAE,CAAC,CAAC;aACrD,KAAK,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,IAAI,CAAC,SAAS,CAAC,OAAO,EAAE,GAAG,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAgB,CAAC,CAAC,CAAC,CAAC;QAEzF,IAAI,CAAC,SAAS;aACX,iBAAiB,CAAC,cAAc,CAAC,UAAU,CAAC;aAC5C,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,QAAQ,EAAE,CAAC,UAAU,CAAC,CAAC;aAC7D,KAAK,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,IAAI,CAAC,SAAS,CAAC,YAAY,EAAE,GAAG,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,aAAa,CAAC,KAAe,CAAC,CAAC,CAAC,CAAC;QAElG,IAAI,CAAC,SAAS;aACX,iBAAiB,CAAC,cAAc,CAAC,gBAAgB,CAAC;YACnD,wDAAwD;aACvD,QAAQ,CAAC,EAAE,QAAQ,EAAE,aAAa,CAAC,UAAU,CAAC,EAAE,QAAQ,EAAE,aAAa,CAAC,UAAU,CAAC,EAAE,CAAC;aACtF,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,GAAG,EAAE,CAAC,aAAa,CAAC,IAAI,CAAC,IAAI,CAAC,QAAQ,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC;aACxE,KAAK,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,IAAI,CAAC,SAAS,CAAC,oBAAoB,EAAE,GAAG,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,mBAAmB,CAAC,aAAa,CAAC,KAAe,CAAC,CAAC,CAAC,CAAC,CAAC;QAE/H,4EAA4E;QAC5E,wCAAwC;QACxC,IAAI,CAAC,IAAI,CAAC,EAAE,CAAC,cAAc,EAAE,GAAG,EAAE,CAAC,IAAI,CAAC,eAAe,EAAE,CAAC,CAAC;QAC3D,IAAI,CAAC,IAAI,CAAC,EAAE,CAAC,WAAW,EAAE,GAAG,EAAE;YAC7B,MAAM,KAAK,GAAG,IAAI,CAAC,IAAI,CAAC,QAAQ,EAAE,CAAC;YACnC,IAAI,CAAC,SAAS,CAAC,oBAAoB,CAAC,cAAc,CAAC,EAAE,EAAE,KAAK,CAAC,EAAE,CAAC,CAAC;YACjE,IAAI,CAAC,SAAS,CAAC,oBAAoB,CAAC,cAAc,CAAC,UAAU,EAAE,KAAK,CAAC,UAAU,CAAC,CAAC;YACjF,IAAI,CAAC,SAAS,CAAC,oBAAoB,CAAC,cAAc,CAAC,gBAAgB,EAAE,aAAa,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC;QACpG,CAAC,CAAC,CAAC;QAEH,IAAI,MAAM,CAAC,YAAY,EAAE,CAAC;YACxB,IAAI,CAAC,MAAM;gBACT,IAAI,CAAC,SAAS,CAAC,UAAU,CAAC,OAAO,CAAC,YAAY,CAAC;oBAC/C,IAAI,CAAC,SAAS,CAAC,UAAU,CAAC,OAAO,CAAC,YAAY,EAAE,GAAG,MAAM,CAAC,IAAI,SAAS,CAAC,CAAC;YAC3E,IAAI,CAAC,MAAM;iBACR,iBAAiB,CAAC,cAAc,CAAC,cAAc,CAAC;iBAChD,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,MAAM,EAAE,iBAAiB,CAAC,cAAc,CAAC,cAAc,CAAC,CAAC,KAAK,IAAI,KAAK,CAAC,CAAC,CAAC;YAC9G,IAAI,CAAC,IAAI,CAAC,EAAE,CAAC,QAAQ,EAAE,CAAC,QAAQ,EAAE,EAAE;gBAClC,IAAI,CAAC,MAAM,EAAE,oBAAoB,CAAC,cAAc,CAAC,cAAc,EAAE,QAAQ,CAAC,CAAC;YAC7E,CAAC,CAAC,CAAC;QACL,CAAC;QAED,IAAI,CAAC,IAAI,CAAC,EAAE,CAAC,OAAO,EAAE,CAAC,KAAK,EAAE,EAAE;YAC9B,IAAI,CAAC,SAAS,CAAC,oBAAoB,CAAC,cAAc,CAAC,EAAE,EAAE,KAAK,CAAC,EAAE,CAAC,CAAC;YACjE,IAAI,CAAC,SAAS,CAAC,oBAAoB,CAAC,cAAc,CAAC,UAAU,EAAE,KAAK,CAAC,UAAU,CAAC,CAAC;YACjF,IAAI,CAAC,SAAS,CAAC,oBAAoB,CAAC,cAAc,CAAC,gBAAgB,EAAE,aAAa,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC;QACpG,CAAC,CAAC,CAAC;IACL,CAAC;IAED,KAAK,CAAC,KAAK;QACT,IAAI,CAAC;YACH,MAAM,IAAI,CAAC,IAAI,CAAC,KAAK,EAAE,CAAC;QAC1B,CAAC;QAAC,OAAO,KAAK,EAAE,CAAC;YACf,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,KAAK,CAAC,mCAAmC,IAAI,CAAC,MAAM,CAAC,IAAI,KAAK,aAAa,CAAC,KAAK,CAAC,EAAE,CAAC,CAAC;QAC1G,CAAC;IACH,CAAC;IAED,KAAK,CAAC,IAAI;QACR,MAAM,IAAI,CAAC,IAAI,CAAC,IAAI,EAAE,CAAC;IACzB,CAAC;IAED;;;;;;;OAOG;IACK,IAAI,CAAI,IAAa;QAC3B,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,WAAW,EAAE,EAAE,CAAC;YAC7B,MAAM,IAAI,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,GAAG,CAAC,cAAc,4EAE7C,CAAC;QACJ,CAAC;QACD,OAAO,IAAI,EAAE,CAAC;IAChB,CAAC;IAED,0DAA0D;IAClD,eAAe;QACrB,MAAM,EAAE,cAAc,EAAE,GAAG,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,GAAG,CAAC;QACjD,MAAM,KAAK,GAAG,IAAI,KAAK,CAAC,GAAG,IAAI,CAAC,MAAM,CAAC,IAAI,kCAAkC,CAAC,CAAC;QAC/E,KAAK,MAAM,cAAc,IAAI,CAAC,cAAc,CAAC,EAAE,EAAE,cAAc,CAAC,UAAU,EAAE,cAAc,CAAC,gBAAgB,CAAC,EAAE,CAAC;YAC7G,IAAI,CAAC,SAAS,CAAC,oBAAoB,CAAC,cAAc,EAAE,KAAK,CAAC,CAAC;QAC7D,CAAC;QACD,IAAI,CAAC,MAAM,EAAE,oBAAoB,CAAC,cAAc,CAAC,cAAc,EAAE,KAAK,CAAC,CAAC;IAC1E,CAAC;IAED;;;;;;OAMG;IACK,KAAK,CAAC,SAAS,CAAC,IAAY,EAAE,KAA0B;QAC9D,IAAI,CAAC;YACH,MAAM,KAAK,EAAE,CAAC;QAChB,CAAC;QAAC,OAAO,KAAK,EAAE,CAAC;YACf,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,IAAI,CAAC,WAAW,IAAI,OAAO,IAAI,CAAC,MAAM,CAAC,IAAI,YAAY,aAAa,CAAC,KAAK,CAAC,EAAE,CAAC,CAAC;YACjG,MAAM,IAAI,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,GAAG,CAAC,cAAc,4EAE7C,CAAC;QACJ,CAAC;IACH,CAAC;CACF"}

package/dist/cli/pair.d.ts

@@ -0,0 +1,2 @@
+#!/usr/bin/env node
+export {};