hm2mqtt 3.0.0 → 3.2.0

package/README.md

@@ -66,11 +66,13 @@ so the CCU can call back. `--restart unless-stopped` brings it back after `maint
 | `-m, --name-file`                                                                                                                            | —                                                 | JSON `{address: name}` overriding ReGa names ([example-names.json](example-names.json))                            |
 | `--item-template`, `--sysvar-item-template`, `--program-item-template`                                                                       | `${channelName\|channel}/${datapoint}`, `${name}` | how items (topic parts) are built, see [Item templates](#item-templates)                                           |
 | `--rega-names-interval`                                                                                                                      | 3600                                              | seconds between re-reads of names/rooms/functions (0 = only at start and on `set/rega/sync`)                       |
-| `--hm-payload` / `--no-hm-payload`                                                                                                           | on                                                | the `hm` meta data block in status payloads ([Payloads](#payloads))                                                |
+| `--payload`                                                                                                                                  | `mqsh-extended`                                   | status payload format: `mqsh-extended`, `mqsh-basic` or `plain` ([Payloads](#payloads))                            |
 | `--plain-tree <level>`                                                                                                                       | —                                                 | additionally publish plain payloads under `<name>/<level>/…` (the second `ccu-mqtt` node of the Node-RED flow)     |
 | `--publish-cache`                                                                                                                            | off                                               | publish every datapoint value known to the ReGa at start (thousands of retained messages)                          |
 | `--publish-counters`, `--duty-cycle-interval`                                                                                                | on, 90                                            | rpc rx/tx counters and `listBidcosInterfaces` duty cycle polling (0 = off)                                         |
 | `--rpc-topics`                                                                                                                               | off                                               | arbitrary rpc calls via MQTT — an unrestricted API surface, only on a trusted broker                               |
+| `--ignore`                                                                                                                                   | —                                                 | comma separated globs on `<interface>.<channel>.<datapoint>` not to publish, e.g. `*.*.RSSI_*,HmIP-RF.*.*_STATUS`  |
+| `--ha-generic` / `--no-ha-generic`                                                                                                           | on                                                | announce datapoints without a role as (disabled) generic entities ([Home Assistant](#home-assistant))              |
 | `--state-dir`                                                                                                                                | `$STATE_DIRECTORY` or `~/.hm2mqtt`                | devices, paramset descriptions, names and last values                                                              |
 | `-u, --mqtt-url`, `--mqtt-username`, `--mqtt-password`, `--mqtt-tls-ca`, `-n, --name`, `--json-payloads`, `--maintenance`, `-v, --verbosity` | core                                              | shared options of every adapter; `--name` (default `hm`) is the topic prefix                                       |
 
@@ -165,9 +167,10 @@ meta data block of node-red-contrib-ccu's messages, field for field:
 `ENUM` datapoints carry `datapointEnum` (the value list) and `valueEnum` (the name of the current
 value). Variables have `type: "SYSVAR"` with `valueType`, `unit`, `enum`, `valueEnum`, `id` and —
 when bound to a channel — the channel fields; programs `type: "PROGRAM"` with `active`,
-`activePrevious`, `ts` (last execution). `--no-hm-payload` leaves `{val, ts, lc}`,
-`--no-json-payloads` publishes the bare value. `--plain-tree state` mirrors every item to
-`<name>/state/…` with plain values and booleans as `0`/`1`.
+`activePrevious`, `ts` (last execution). `--payload` selects the format the way the `ccu-mqtt` node did:
+`mqsh-extended` (default, as above), `mqsh-basic` (`{val, ts, lc}`) or `plain` (the bare value,
+booleans as `0`/`1`). `--plain-tree state` additionally mirrors every item to `<name>/state/…` in
+the plain format (the second `ccu-mqtt` node of a flow).
 
 ## Names
 
@@ -178,8 +181,37 @@ address as well.
 
 ## Home Assistant
 
-The core's discovery options (`--ha-discovery`, `--ha-prefix`) exist, but 3.0 does not announce
-devices yet — channel-type to entity mapping is planned for 3.1 (ROADMAP §10).
+Device-based MQTT discovery (`homeassistant/device/<id>/config`, HA ≥ 2024.11) is on by default
+(`--no-ha-discovery` clears it, `--ha-prefix` changes the prefix). One HA device per Homematic
+device (manufacturer eQ-3, model = device type, `via_device` = the CCU bridge device,
+`suggested_area` = the room when all channels sit in one room), available while `<name>/connected`
+is `2` **and** the device's `UNREACH` is false.
+
+Entities are derived from the paramset descriptions, not from a device list — every device the
+CCU knows works: the `CONTROL` hint of a channel's primary datapoint decides the role
+(`SWITCH.STATE`, `DIMMER.LEVEL`, `BLIND.LEVEL`, `DOOR_SENSOR.STATE`, `HEATING_CONTROL(_HMIP).SETPOINT`,
+`LOCK.STATE`, `BUTTON.SHORT`, …), the channel type covers the older HM devices.
+
+| role                                                   | entity                                                                                                                                        |
+| ------------------------------------------------------ | --------------------------------------------------------------------------------------------------------------------------------------------- |
+| switch (HM `SWITCH`, HmIP `*_VIRTUAL_RECEIVER`)        | `switch`; HmIP: state from the `SWITCH_TRANSMITTER` channel, first receiver enabled, receivers 2/3 disabled by default                        |
+| dimmer                                                 | `light` with brightness (`LEVEL` 0..1 ↔ 0..100 %)                                                                                             |
+| blind / shutter                                        | `cover` with position, `STOP`, tilt (`LEVEL_2`) when present, opening/closing from `DIRECTION`/`ACTIVITY_STATE`                               |
+| thermostat (HM and HmIP)                               | `climate`: setpoint, current temperature/humidity, modes `auto`/`heat`, preset `boost` (HM also `comfort`/`eco`), action                      |
+| contact, rotary handle, motion, presence, smoke, water | `binary_sensor` with device class (rotary handle also a `closed/tilted/open` sensor)                                                          |
+| key                                                    | `event` per key channel with `press_short`, `press_long`, … (from the aggregate `<channel>/PRESS` item)                                       |
+| lock (KEYMATIC)                                        | `lock`                                                                                                                                        |
+| energy meter, weather                                  | `sensor`s with device/state classes and units                                                                                                 |
+| maintenance (`:0`)                                     | `LOW_BAT` battery sensor enabled; `RSSI_*`, `OPERATING_VOLTAGE`, `UNREACH`, `DUTY_CYCLE`, … diagnostic, disabled                              |
+| everything else                                        | generic `sensor`/`binary_sensor`/`switch`/`select`/`number`/`button` from the description, disabled by default (`--no-ha-generic` drops them) |
+
+The entities use the normal topics; three small additions make HA's single-topic conventions work:
+`set/<channel>/LEVEL` accepts `OPEN`, `CLOSE`, `STOP`, `ON` (restore last level) and `OFF`; HM
+thermostats accept `set/<channel>/CONTROL_MODE` with `AUTO-MODE`, `MANU-MODE`, `BOOST-MODE`,
+`COMFORT-MODE`, `LOWERING-MODE` (translated to the mode actions); every key press is also
+published as `status/<channel>/PRESS` (`val` = `PRESS_SHORT` etc., not retained). `--ignore`
+keeps datapoints out of both MQTT and discovery. Not covered yet: RGBW/colour lights, sirens,
+garage doors, variables/programs as entities.
 
 ## Migration
 

package/config.js

@@ -76,7 +76,14 @@ export const OPTIONS = {
         default: DEFAULT_SYSVAR_ITEM_TEMPLATE,
     },
     'program-item-template': {type: 'string', describe: 'item of a program', default: DEFAULT_PROGRAM_ITEM_TEMPLATE},
-    'hm-payload': {type: 'boolean', describe: 'add the "hm" meta data block to every status payload', default: true},
+    payload: {
+        type: 'string',
+        describe:
+            'status payload format: mqsh-extended ({val, ts, lc, hm}), mqsh-basic ({val, ts, lc}) or plain (value only, booleans as 0/1)',
+        choices: ['plain', 'mqsh-basic', 'mqsh-extended'],
+        default: 'mqsh-extended',
+    },
+    'hm-payload': {type: 'boolean', describe: 'deprecated: --no-hm-payload = --payload mqsh-basic', hidden: true},
     'plain-tree': {
         type: 'string',
         describe: 'additionally publish plain payloads under <name>/<level>/... (e.g. "state")',
@@ -88,6 +95,16 @@ export const OPTIONS = {
         default: true,
     },
     'duty-cycle-interval': {type: 'number', describe: 'seconds between duty cycle polls, 0 = off', default: 90},
+    ignore: {
+        type: 'string',
+        describe:
+            'comma separated globs on <interface>.<channel>.<datapoint> not to publish, e.g. "*.*.RSSI_*,HmIP-RF.*.*_STATUS"',
+    },
+    'ha-generic': {
+        type: 'boolean',
+        describe: 'Home Assistant discovery: also announce datapoints without a role as (disabled) generic entities',
+        default: true,
+    },
     'rpc-topics': {
         type: 'boolean',
         describe: 'accept arbitrary rpc calls on <name>/rpc/<interface>/<method>/<callid> (security surface!)',

package/index.js

@@ -22,6 +22,8 @@ import {ValueStore, hmBlock, isEvent} from './lib/values.js';
 import {RegaSync} from './lib/rega.js';
 import {castValue, isWriteable} from './lib/cast.js';
 import {sanitizeName, resolveSet, resolveParamset, plainValue, compileTemplate, ItemIndex} from './lib/topics.js';
+import {compileIgnore} from './lib/roles.js';
+import {discoveryModel} from './lib/hadiscovery.js';
 
 handleInstall(config);
 
@@ -77,11 +79,48 @@ if (config.nameFile) {
     nameFile = JSON.parse(fs.readFileSync(path.resolve(config.nameFile), 'utf8'));
 }
 
+/*
+ * payload format (node-red-contrib-ccu's mqsh-extended / mqsh-basic / plain)
+ */
+let payloadFormat = config.payload;
+if (config.hmPayload === false && payloadFormat === 'mqsh-extended') {
+    payloadFormat = 'mqsh-basic';
+}
+if (!config.jsonPayloads) {
+    payloadFormat = 'plain';
+}
+config.jsonPayloads = payloadFormat !== 'plain';
+const withHm = payloadFormat === 'mqsh-extended';
+/** the value as published: plain format uses node-red's 0/1 for booleans */
+const outValue = (value) => (payloadFormat === 'plain' ? plainValue(value) : value);
+
+const ignored = compileIgnore(config.ignore);
+
 const adapter = createAdapter({
     pkg,
     config,
     deviceLabel: 'ccu',
-    info: () => ({ccu: host, interfaces: enabled, devices: metadata.count(), rega: Boolean(regaSync)}),
+    discovery: () =>
+        discoveryModel({
+            adapterName: pkg.name,
+            name: config.name,
+            jsonPayloads: config.jsonPayloads,
+            generic: config.haGeneric,
+            devices: metadata.devices,
+            description: (iface, address) => metadata.description(iface, address, 'VALUES'),
+            channelName,
+            rooms: (address) => (regaSync ? regaSync.rooms(address) : undefined),
+            itemFor: (iface, address, datapoint) => renderItem(values.fields(iface, address, datapoint)).name,
+            ignored,
+            interfaces: enabled,
+        }),
+    info: () => ({
+        ccu: host,
+        interfaces: enabled,
+        devices: metadata.count(),
+        rega: Boolean(regaSync),
+        payload: payloadFormat,
+    }),
     onSet: handleSet,
     subscriptions: {
         'paramset/#': handleParamset,
@@ -194,6 +233,8 @@ function rebuildIndex() {
         );
     }
     log.debug('item index rebuilt:', itemIndex.size, 'items');
+    adapter.markDiscoveryDirty();
+    adapter.publishDiscovery();
 }
 
 function scheduleIndex() {
@@ -212,8 +253,8 @@ function publishPlain(item, value, retain) {
 
 function publishMessage(message, {retain = true} = {}) {
     const item = rendered(renderItem, message, message.datapointName);
-    const extra = config.hmPayload ? {hm: hmBlock(message)} : undefined;
-    pubStatus(item, message.value, {retain, extra, ts: message.ts, lc: message.lc});
+    const extra = withHm ? {hm: hmBlock(message)} : undefined;
+    pubStatus(item, outValue(message.value), {retain, extra, ts: message.ts, lc: message.lc});
     publishPlain(item, message.value, retain);
 }
 
@@ -221,13 +262,13 @@ function publishRega(message) {
     const render = message.type === 'PROGRAM' ? renderProgramItem : renderSysvarItem;
     const item = rendered(render, message, `${message.type} ${message.name}`);
     itemIndex.add(item, {kind: message.type === 'PROGRAM' ? 'program' : 'sysvar', name: message.name});
-    const extra = config.hmPayload ? {hm: hmBlock(message)} : undefined;
-    pubStatus(item, message.value, {retain: true, extra, ts: message.ts, lc: message.lc});
+    const extra = withHm ? {hm: hmBlock(message)} : undefined;
+    pubStatus(item, outValue(message.value), {retain: true, extra, ts: message.ts, lc: message.lc});
     publishPlain(item, message.value, true);
 }
 
 function publishItem(item, value, {retain = true} = {}) {
-    pubStatus(item, value, {retain});
+    pubStatus(item, outValue(value), {retain});
     publishPlain(item, value, retain);
 }
 
@@ -342,9 +383,47 @@ function connectionOf(address) {
     return {iface, conn};
 }
 
+/** HM thermostats: CONTROL_MODE is read-only, the modes are set through actions (H-26) */
+const HM_MODES = {
+    'AUTO-MODE': () => ['AUTO_MODE', true],
+    'MANU-MODE': (setpoint) => ['MANU_MODE', setpoint],
+    'BOOST-MODE': () => ['BOOST_MODE', true],
+    'COMFORT-MODE': () => ['COMFORT_MODE', true],
+    'LOWERING-MODE': () => ['LOWERING_MODE', true],
+};
+
+/** Words Home Assistant's single-topic conventions send to LEVEL (H-23). */
+const LEVEL_WORDS = {OPEN: 1, CLOSE: 0, ON: 1.005, OFF: 0};
+
 async function setValue(address, datapoint, value) {
     const {iface, conn} = connectionOf(address);
-    const description = metadata.valueDescription(iface, address, datapoint);
+    let description = metadata.valueDescription(iface, address, datapoint);
+    if (datapoint === 'LEVEL' && typeof value === 'string') {
+        const word = value.trim().toUpperCase();
+        if (word === 'STOP') {
+            if (!metadata.valueDescription(iface, address, 'STOP')) {
+                throw new Error(`${address} has no STOP`);
+            }
+            return setValue(address, 'STOP', true);
+        }
+        if (word in LEVEL_WORDS) {
+            value = LEVEL_WORDS[word];
+        }
+    }
+    if (
+        datapoint === 'CONTROL_MODE' &&
+        typeof value === 'string' &&
+        HM_MODES[value.toUpperCase()] &&
+        !isWriteable(description)
+    ) {
+        const current = values.get(iface, address, 'SET_TEMPERATURE');
+        const [dp, v] = HM_MODES[value.toUpperCase()](
+            current && typeof current.value === 'number' ? current.value : 20,
+        );
+        datapoint = dp;
+        value = v;
+        description = metadata.valueDescription(iface, address, datapoint);
+    }
     if (!isWriteable(description)) {
         throw new Error(`${address} ${datapoint} is not writeable`);
     }
@@ -481,6 +560,9 @@ function onEvent(iface, event) {
         regaSync.poll().catch((err) => log.warn('rega poll failed:', err.message));
     }
     values.event({iface, ...event}, (message) => {
+        if (ignored(iface, event.channel, event.datapoint)) {
+            return;
+        }
         const description = metadata.valueDescription(iface, event.channel, event.datapoint);
         if (!metadata.device(iface, event.channel)) {
             log.debug(iface, 'event of unknown channel', event.channel);
@@ -488,6 +570,19 @@ function onEvent(iface, event) {
             log.debug(iface, 'no description for', event.channel, event.datapoint);
         }
         publishMessage(message, {retain: !isEvent(event.datapoint, description)});
+        if (event.datapoint.startsWith('PRESS_') && event.value) {
+            // one event item per key channel carrying every press type (HA event entities, H-23)
+            publishMessage(
+                {
+                    ...message,
+                    datapoint: 'PRESS',
+                    datapointName: message.datapointName.replace(/PRESS_\w+$/, 'PRESS'),
+                    value: event.datapoint,
+                    payload: event.datapoint,
+                },
+                {retain: false},
+            );
+        }
         const notWorking = values.notWorking(message);
         if (notWorking) {
             publishMessage(notWorking);

package/lib/hadiscovery.js

@@ -0,0 +1,692 @@
+/**
+ * Home Assistant discovery: one HA device per Homematic device (ROADMAP §13, H-22…H-26),
+ * composite entities from the channel roles (light, cover, climate, lock, event, switch, ...)
+ * and generic entities for every other datapoint (disabled by default). Pure: devices,
+ * descriptions and names in, device blocks for the core's discovery() out.
+ */
+
+import {entity, availability, discoveryId} from 'mqtt-interfaces-core';
+import {channelRole, haUnit, isFraction, PARAMETERS} from './roles.js';
+
+const TILT_TYPES = /BLIND/;
+
+/**
+ * @typedef {object} DiscoveryContext
+ * @property {string} adapterName package name (hm2mqtt)
+ * @property {string} name instance name / topic prefix
+ * @property {boolean} jsonPayloads
+ * @property {boolean} [generic] generic entities for datapoints without a role (default true)
+ * @property {Object<string, Object<string, object>>} devices metadata.devices (iface → address → device)
+ * @property {(iface: string, address: string) => object | undefined} description VALUES description of a channel
+ * @property {(address: string) => string | undefined} channelName
+ * @property {(address: string) => string[] | undefined} rooms
+ * @property {(iface: string, address: string, datapoint: string) => string} itemFor rendered item of a datapoint
+ * @property {(iface: string, address: string, datapoint: string) => boolean} [ignored]
+ * @property {string[]} [interfaces] enabled interfaces (bridge entities)
+ */
+
+function templates(json) {
+    const v = json ? 'value_json.val' : 'value';
+    return {
+        v,
+        num: `{{ ${v} }}`,
+        bool: (on = 'ON', off = 'OFF') =>
+            json
+                ? `{{ '${on}' if ${v} else '${off}' }}`
+                : `{{ '${on}' if (${v} | string | lower) in ('1', 'true', 'on') else '${off}' }}`,
+        percent: `{{ ((${v} | float(0)) * 100) | round }}`,
+        int: `${v} | int(0)`,
+        float: `${v} | float(0)`,
+    };
+}
+
+function labelOf(channel, deviceName, fallback) {
+    const name = channel.name;
+    if (!name) {
+        return fallback;
+    }
+    if (deviceName && name !== deviceName && name.startsWith(deviceName)) {
+        const rest = name.slice(deviceName.length).replace(/^[\s:.-]+/, '');
+        return rest || fallback;
+    }
+    if (name === deviceName) {
+        return fallback;
+    }
+    return name;
+}
+
+/**
+ * Builds the discovery device blocks.
+ * @param {DiscoveryContext} ctx
+ * @returns {object[]} device blocks ({id, device, components, availability})
+ */
+export function discoveryModel(ctx) {
+    const {adapterName, name, jsonPayloads: json = true, devices, itemFor} = ctx;
+    const ignored = ctx.ignored || (() => false);
+    const t = templates(json);
+    const bridgeId = discoveryId(adapterName, name);
+    const st = (iface, address, dp) => `${name}/status/${itemFor(iface, address, dp)}`;
+    const cmd = (iface, address, dp) => `${name}/set/${itemFor(iface, address, dp)}`;
+    const blocks = [];
+
+    // the CCU / bridge device
+    const bridgeComponents = {};
+    for (const iface of ctx.interfaces || []) {
+        bridgeComponents[`iface_${iface}`] = entity({
+            id: bridgeId,
+            name,
+            item: `interface/${iface}/connected`,
+            platform: 'binary_sensor',
+            label: `${iface} connected`,
+            jsonPayloads: json,
+            category: 'diagnostic',
+            extra: {dev_cla: 'connectivity', val_tpl: t.bool()},
+        });
+        for (const dir of ['rx', 'tx']) {
+            bridgeComponents[`counter_${iface}_${dir}`] = entity({
+                id: bridgeId,
+                name,
+                item: `counter/${iface}/${dir}`,
+                platform: 'sensor',
+                label: `${iface} ${dir}`,
+                jsonPayloads: json,
+                category: 'diagnostic',
+                extra: {stat_cla: 'total_increasing', en: false},
+            });
+        }
+    }
+    blocks.push({id: bridgeId, device: {mf: 'eQ-3', mdl: 'CCU'}, components: bridgeComponents});
+
+    for (const [iface, list] of Object.entries(devices)) {
+        for (const device of Object.values(list)) {
+            if (device.PARENT) {
+                continue;
+            }
+            const block = deviceBlock({iface, device, list, ctx, t, st, cmd, bridgeId, ignored});
+            if (block) {
+                blocks.push(block);
+            }
+        }
+    }
+    return blocks;
+}
+
+function deviceBlock({iface, device, list, ctx, t, st, cmd, bridgeId, ignored}) {
+    const {adapterName, name, jsonPayloads: json = true, generic = true} = ctx;
+    const id = discoveryId(adapterName, `${name}_${device.ADDRESS}`);
+    const deviceName = ctx.channelName(device.ADDRESS) || device.ADDRESS;
+    const channels = (device.CHILDREN || [])
+        .map((address) => list[address])
+        .filter(Boolean)
+        .map((ch) => ({
+            ...ch,
+            index: Number.parseInt(String(ch.ADDRESS).split(':')[1], 10),
+            name: ctx.channelName(ch.ADDRESS),
+            description: ctx.description(iface, ch.ADDRESS) || {},
+        }))
+        .sort((a, b) => a.index - b.index);
+    for (const ch of channels) {
+        ch.role = channelRole(ch.TYPE, ch.description);
+    }
+    resolveVirtualReceivers(channels);
+
+    const components = {};
+    const add = (key, e) => {
+        components[key] = e;
+    };
+    const rooms = new Set();
+    for (const ch of channels) {
+        for (const r of ctx.rooms(ch.ADDRESS) || []) {
+            rooms.add(r);
+        }
+    }
+    const maintenance = channels.find((ch) => ch.index === 0);
+
+    for (const ch of channels) {
+        const consumed = new Set();
+        const e = (dp, platform, label, more = {}) =>
+            entity({
+                id,
+                name,
+                item: ctx.itemFor(iface, ch.ADDRESS, dp),
+                platform,
+                label,
+                uid: `${ch.index}_${dp}`,
+                jsonPayloads: json,
+                ...more,
+            });
+        const fallback = ch.index === 0 ? 'Maintenance' : `Channel ${ch.index}`;
+        const label = labelOf(ch, deviceName, fallback);
+        const has = (dp) => Boolean(ch.description[dp]) && !ignored(iface, ch.ADDRESS, dp);
+        const key = (dp) => `${ch.index}_${dp}`;
+        const stateCh = ch.stateChannel || ch;
+        const sst = (dp) => st(iface, stateCh.ADDRESS, dp);
+        const own = (dp) => st(iface, ch.ADDRESS, dp);
+        const scmd = (dp) => cmd(iface, ch.ADDRESS, dp);
+        const disabled = ch.secondary ? {en: false} : {};
+
+        switch (ch.role) {
+            case 'switch':
+                if (has('STATE')) {
+                    add(
+                        key('STATE'),
+                        e('STATE', 'switch', label, {
+                            command: true,
+                            extra: {
+                                stat_t: sst('STATE'),
+                                val_tpl: t.bool(),
+                                pl_on: 'true',
+                                pl_off: 'false',
+                                ...disabled,
+                            },
+                        }),
+                    );
+                    consumed.add('STATE');
+                }
+                break;
+            case 'switch_state':
+                if (has('STATE') && !ch.transmitterFor) {
+                    add(key('STATE'), e('STATE', 'binary_sensor', label, {extra: {val_tpl: t.bool(), en: false}}));
+                    consumed.add('STATE');
+                }
+                if (ch.transmitterFor) {
+                    consumed.add('STATE');
+                }
+                break;
+            case 'dimmer':
+                if (has('LEVEL')) {
+                    add(
+                        key('LEVEL'),
+                        e('LEVEL', 'light', label, {
+                            command: true,
+                            extra: {
+                                stat_t: sst('LEVEL'),
+                                stat_val_tpl: `{{ 'ON' if (${t.float}) > 0 else 'OFF' }}`,
+                                pl_on: 'ON',
+                                pl_off: 'OFF',
+                                on_cmd_type: 'brightness',
+                                bri_cmd_t: scmd('LEVEL'),
+                                bri_cmd_tpl: '{{ (value / 100) | round(3) }}',
+                                bri_scl: 100,
+                                bri_stat_t: sst('LEVEL'),
+                                bri_val_tpl: t.percent,
+                                ...disabled,
+                            },
+                        }),
+                    );
+                    consumed.add('LEVEL');
+                }
+                break;
+            case 'dimmer_state':
+                if (ch.transmitterFor) {
+                    consumed.add('LEVEL');
+                }
+                break;
+            case 'cover': {
+                if (has('LEVEL')) {
+                    const tilt = has('LEVEL_2');
+                    const direction = stateCh.description.ACTIVITY_STATE
+                        ? 'ACTIVITY_STATE'
+                        : stateCh.description.DIRECTION
+                          ? 'DIRECTION'
+                          : null;
+                    add(
+                        key('LEVEL'),
+                        e('LEVEL', 'cover', label, {
+                            command: true,
+                            extra: {
+                                dev_cla: TILT_TYPES.test(ch.TYPE) ? 'blind' : 'shutter',
+                                pl_open: 'OPEN',
+                                pl_cls: 'CLOSE',
+                                pl_stop: 'STOP',
+                                pos_t: sst('LEVEL'),
+                                pos_tpl: t.percent,
+                                set_pos_t: scmd('LEVEL'),
+                                set_pos_tpl: '{{ (position / 100) | round(3) }}',
+                                pos_open: 100,
+                                pos_clsd: 0,
+                                ...(direction && {
+                                    stat_t: sst(direction),
+                                    val_tpl: `{% set d = ${t.int} %}{{ 'opening' if d == 1 else 'closing' if d == 2 else 'stopped' }}`,
+                                    stat_opening: 'opening',
+                                    stat_closing: 'closing',
+                                    stat_stopped: 'stopped',
+                                }),
+                                ...(tilt && {
+                                    tilt_cmd_t: scmd('LEVEL_2'),
+                                    tilt_cmd_tpl: '{{ (tilt_position / 100) | round(3) }}',
+                                    tilt_status_t: sst('LEVEL_2'),
+                                    tilt_status_tpl: t.percent,
+                                }),
+                                ...disabled,
+                            },
+                        }),
+                    );
+                    for (const dp of ['LEVEL', 'LEVEL_2', 'STOP']) {
+                        consumed.add(dp);
+                    }
+                }
+                break;
+            }
+            case 'cover_state':
+                if (ch.transmitterFor) {
+                    for (const dp of ['LEVEL', 'LEVEL_2', 'ACTIVITY_STATE', 'DIRECTION']) {
+                        consumed.add(dp);
+                    }
+                }
+                break;
+            case 'contact':
+                if (has('STATE')) {
+                    add(
+                        key('STATE'),
+                        e('STATE', 'binary_sensor', label, {
+                            extra: {
+                                dev_cla:
+                                    ch.TYPE === 'MULTI_MODE_INPUT_TRANSMITTER'
+                                        ? 'opening'
+                                        : ch.TYPE === 'TILT_SENSOR'
+                                          ? 'moving'
+                                          : 'window',
+                                val_tpl: t.bool(),
+                            },
+                        }),
+                    );
+                    consumed.add('STATE');
+                }
+                break;
+            case 'rotary_handle':
+                if (has('STATE')) {
+                    add(
+                        key('STATE'),
+                        e('STATE', 'binary_sensor', label, {
+                            extra: {dev_cla: 'window', val_tpl: `{{ 'ON' if (${t.int}) != 0 else 'OFF' }}`},
+                        }),
+                    );
+                    add(
+                        key('STATE_text'),
+                        e('STATE', 'sensor', `${label} handle`, {
+                            uid: `${ch.index}_STATE_text`,
+                            extra: {val_tpl: `{{ ['closed', 'tilted', 'open'][${t.int}] }}`, en: false},
+                        }),
+                    );
+                    consumed.add('STATE');
+                }
+                break;
+            case 'key': {
+                const types = ['PRESS_SHORT', 'PRESS_LONG', 'PRESS_LONG_RELEASE', 'PRESS_CONT'].filter((dp) => has(dp));
+                if (types.length > 0) {
+                    add(
+                        key('PRESS'),
+                        e('PRESS', 'event', label, {
+                            extra: {
+                                dev_cla: 'button',
+                                evt_typ: types.map((x) => x.toLowerCase()),
+                                val_tpl: `{{ {'event_type': (${t.v} | string | lower)} | tojson }}`,
+                            },
+                        }),
+                    );
+                    for (const dp of types) {
+                        consumed.add(dp);
+                    }
+                }
+                break;
+            }
+            case 'climate_hmip':
+                if (has('SET_POINT_TEMPERATURE')) {
+                    const d = ch.description;
+                    add(
+                        key('CLIMATE'),
+                        e('SET_POINT_TEMPERATURE', 'climate', label, {
+                            uid: `${ch.index}_CLIMATE`,
+                            extra: {
+                                stat_t: undefined,
+                                val_tpl: undefined,
+                                temp_unit: 'C',
+                                temp_step: 0.5,
+                                min_temp: d.SET_POINT_TEMPERATURE.MIN ?? 4.5,
+                                max_temp: d.SET_POINT_TEMPERATURE.MAX ?? 30.5,
+                                temp_stat_t: own('SET_POINT_TEMPERATURE'),
+                                temp_stat_tpl: t.num,
+                                temp_cmd_t: scmd('SET_POINT_TEMPERATURE'),
+                                ...(has('ACTUAL_TEMPERATURE') && {
+                                    curr_temp_t: own('ACTUAL_TEMPERATURE'),
+                                    curr_temp_tpl: t.num,
+                                }),
+                                ...(has('HUMIDITY') && {curr_hum_t: own('HUMIDITY'), curr_hum_tpl: t.num}),
+                                modes: ['auto', 'heat'],
+                                ...(has('SET_POINT_MODE') && {
+                                    mode_stat_t: own('SET_POINT_MODE'),
+                                    mode_stat_tpl: `{{ 'auto' if (${t.int}) == 0 else 'heat' }}`,
+                                }),
+                                ...(has('CONTROL_MODE') && {
+                                    mode_cmd_t: scmd('CONTROL_MODE'),
+                                    mode_cmd_tpl: "{{ 0 if value == 'auto' else 1 }}",
+                                }),
+                                ...(has('BOOST_MODE') && {
+                                    pr_modes: ['boost'],
+                                    pr_mode_stat_t: own('BOOST_MODE'),
+                                    pr_mode_val_tpl: `{{ 'boost' if ${t.v} else 'none' }}`,
+                                    pr_mode_cmd_t: scmd('BOOST_MODE'),
+                                    pr_mode_cmd_tpl: "{{ 'true' if value == 'boost' else 'false' }}",
+                                }),
+                                ...(has('LEVEL') && {
+                                    act_t: own('LEVEL'),
+                                    act_tpl: `{{ 'heating' if (${t.float}) > 0 else 'idle' }}`,
+                                }),
+                            },
+                        }),
+                    );
+                    for (const dp of [
+                        'SET_POINT_TEMPERATURE',
+                        'ACTUAL_TEMPERATURE',
+                        'HUMIDITY',
+                        'SET_POINT_MODE',
+                        'CONTROL_MODE',
+                        'BOOST_MODE',
+                        'LEVEL',
+                    ]) {
+                        consumed.add(dp);
+                    }
+                }
+                break;
+            case 'climate_hm':
+                if (has('SET_TEMPERATURE')) {
+                    const d = ch.description;
+                    add(
+                        key('CLIMATE'),
+                        e('SET_TEMPERATURE', 'climate', label, {
+                            uid: `${ch.index}_CLIMATE`,
+                            extra: {
+                                stat_t: undefined,
+                                val_tpl: undefined,
+                                temp_unit: 'C',
+                                temp_step: 0.5,
+                                min_temp: d.SET_TEMPERATURE.MIN ?? 4.5,
+                                max_temp: d.SET_TEMPERATURE.MAX ?? 30.5,
+                                temp_stat_t: own('SET_TEMPERATURE'),
+                                temp_stat_tpl: t.num,
+                                temp_cmd_t: scmd('SET_TEMPERATURE'),
+                                ...(has('ACTUAL_TEMPERATURE') && {
+                                    curr_temp_t: own('ACTUAL_TEMPERATURE'),
+                                    curr_temp_tpl: t.num,
+                                }),
+                                ...(has('ACTUAL_HUMIDITY') && {
+                                    curr_hum_t: own('ACTUAL_HUMIDITY'),
+                                    curr_hum_tpl: t.num,
+                                }),
+                                modes: ['auto', 'heat'],
+                                ...(has('CONTROL_MODE') && {
+                                    mode_stat_t: own('CONTROL_MODE'),
+                                    mode_stat_tpl: `{{ 'heat' if (${t.int}) == 1 else 'auto' }}`,
+                                    mode_cmd_t: scmd('CONTROL_MODE'),
+                                    mode_cmd_tpl: "{{ 'AUTO-MODE' if value == 'auto' else 'MANU-MODE' }}",
+                                    pr_modes: ['boost', 'comfort', 'eco'],
+                                    pr_mode_stat_t: own('CONTROL_MODE'),
+                                    pr_mode_val_tpl: `{{ 'boost' if (${t.int}) == 3 else 'none' }}`,
+                                    pr_mode_cmd_t: scmd('CONTROL_MODE'),
+                                    pr_mode_cmd_tpl:
+                                        "{{ {'boost': 'BOOST-MODE', 'comfort': 'COMFORT-MODE', 'eco': 'LOWERING-MODE'}.get(value, 'AUTO-MODE') }}",
+                                }),
+                                ...(has('VALVE_STATE') && {
+                                    act_t: own('VALVE_STATE'),
+                                    act_tpl: `{{ 'heating' if (${t.int}) > 0 else 'idle' }}`,
+                                }),
+                            },
+                        }),
+                    );
+                    for (const dp of [
+                        'SET_TEMPERATURE',
+                        'ACTUAL_TEMPERATURE',
+                        'ACTUAL_HUMIDITY',
+                        'CONTROL_MODE',
+                        'BOOST_MODE',
+                        'AUTO_MODE',
+                        'MANU_MODE',
+                        'COMFORT_MODE',
+                        'LOWERING_MODE',
+                    ]) {
+                        consumed.add(dp);
+                    }
+                }
+                break;
+            case 'lock':
+                if (has('STATE')) {
+                    add(
+                        key('STATE'),
+                        e('STATE', 'lock', label, {
+                            command: true,
+                            extra: {
+                                val_tpl: t.bool('UNLOCKED', 'LOCKED'),
+                                stat_locked: 'LOCKED',
+                                stat_unlocked: 'UNLOCKED',
+                                pl_lock: 'false',
+                                pl_unlk: 'true',
+                            },
+                        }),
+                    );
+                    consumed.add('STATE');
+                }
+                break;
+            case 'smoke':
+                if (has('SMOKE_DETECTOR_ALARM_STATUS')) {
+                    add(
+                        key('SMOKE'),
+                        e('SMOKE_DETECTOR_ALARM_STATUS', 'binary_sensor', label, {
+                            uid: `${ch.index}_SMOKE`,
+                            extra: {dev_cla: 'smoke', val_tpl: `{{ 'ON' if (${t.int}) in (1, 3) else 'OFF' }}`},
+                        }),
+                    );
+                    consumed.add('SMOKE_DETECTOR_ALARM_STATUS');
+                } else if (has('STATE')) {
+                    add(
+                        key('STATE'),
+                        e('STATE', 'binary_sensor', label, {extra: {dev_cla: 'smoke', val_tpl: t.bool()}}),
+                    );
+                    consumed.add('STATE');
+                }
+                break;
+            case 'water':
+                for (const dp of ['STATE', 'ALARMSTATE', 'MOISTURE_DETECTED', 'WATERLEVEL_DETECTED']) {
+                    if (has(dp)) {
+                        add(
+                            key(dp),
+                            e(
+                                dp,
+                                'binary_sensor',
+                                dp === 'STATE' ? label : `${label} ${dp.toLowerCase().replace(/_/g, ' ')}`,
+                                {extra: {dev_cla: 'moisture', val_tpl: t.bool()}},
+                            ),
+                        );
+                        consumed.add(dp);
+                    }
+                }
+                break;
+            default:
+                break;
+        }
+
+        // generic layer: everything else in the channel's VALUES description
+        for (const [dp, d] of Object.entries(ch.description)) {
+            if (consumed.has(dp) || !d || typeof d !== 'object' || ignored(iface, ch.ADDRESS, dp)) {
+                continue;
+            }
+            const facts = PARAMETERS[dp] || {};
+            const semantic = Boolean(facts.dev_cla || facts.enabled);
+            if (!generic && !semantic) {
+                continue;
+            }
+            const ops = typeof d.OPERATIONS === 'number' ? d.OPERATIONS : 5;
+            const readable = Boolean(ops & 1) || Boolean(ops & 4);
+            const writable = Boolean(ops & 2);
+            const dpLabel = ch.index === 0 && ch.role === 'maintenance' ? prettify(dp) : `${label} ${prettify(dp)}`;
+            const enabled = facts.enabled === true;
+            const common = {
+                ...(facts.dev_cla && {dev_cla: facts.dev_cla}),
+                ...(facts.ent_cat && {ent_cat: facts.ent_cat}),
+                ...(!enabled && {en: false}),
+            };
+            const unit = facts.unit || haUnit(d.UNIT);
+            const value = isFraction(d) ? t.percent : t.num;
+            if (d.TYPE === 'BOOL' || d.TYPE === 'ACTION') {
+                if (writable && !readable) {
+                    if (d.TYPE === 'ACTION') {
+                        add(key(dp), e(dp, 'button', dpLabel, {command: true, extra: {pl_prs: 'true', ...common}}));
+                    }
+                    continue;
+                }
+                if (writable && d.TYPE === 'BOOL') {
+                    add(
+                        key(dp),
+                        e(dp, 'switch', dpLabel, {
+                            command: true,
+                            extra: {val_tpl: t.bool(), pl_on: 'true', pl_off: 'false', ...common},
+                        }),
+                    );
+                } else if (d.TYPE === 'BOOL') {
+                    add(
+                        key(dp),
+                        e(dp, 'binary_sensor', dpLabel, {
+                            extra: {val_tpl: facts.inverted ? t.bool('OFF', 'ON') : t.bool(), ...common},
+                        }),
+                    );
+                }
+                continue;
+            }
+            if (d.TYPE === 'ENUM' && Array.isArray(d.VALUE_LIST)) {
+                if (writable) {
+                    add(
+                        key(dp),
+                        e(dp, 'select', dpLabel, {
+                            command: true,
+                            extra: {
+                                options: d.VALUE_LIST,
+                                val_tpl: `{{ ${JSON.stringify(d.VALUE_LIST)}[${t.int}] }}`,
+                                cmd_tpl: `{{ ${JSON.stringify(d.VALUE_LIST)}.index(value) }}`,
+                                ...common,
+                            },
+                        }),
+                    );
+                } else if (readable) {
+                    add(
+                        key(dp),
+                        e(dp, 'sensor', dpLabel, {
+                            extra: {val_tpl: `{{ ${JSON.stringify(d.VALUE_LIST)}[${t.int}] }}`, ...common},
+                        }),
+                    );
+                }
+                continue;
+            }
+            if (d.TYPE === 'FLOAT' || d.TYPE === 'INTEGER') {
+                if (writable && !readable) {
+                    add(
+                        key(dp),
+                        e(dp, 'number', dpLabel, {
+                            command: true,
+                            extra: {
+                                ...(typeof d.MIN === 'number' && {min: isFraction(d) ? d.MIN * 100 : d.MIN}),
+                                ...(typeof d.MAX === 'number' && {
+                                    max: isFraction(d) ? Math.min(d.MAX, 1) * 100 : d.MAX,
+                                }),
+                                step: d.TYPE === 'INTEGER' ? 1 : isFraction(d) ? 1 : 0.1,
+                                ...(unit && {unit_of_meas: unit}),
+                                ...(isFraction(d) && {cmd_tpl: '{{ (value / 100) | round(3) }}'}),
+                                ...common,
+                            },
+                        }),
+                    );
+                    continue;
+                }
+                add(
+                    key(dp),
+                    e(dp, 'sensor', dpLabel, {
+                        extra: {
+                            val_tpl: value,
+                            ...(unit && {unit_of_meas: unit}),
+                            ...(facts.stat_cla && {stat_cla: facts.stat_cla}),
+                            ...common,
+                        },
+                    }),
+                );
+                continue;
+            }
+            if (d.TYPE === 'STRING' && readable) {
+                add(key(dp), e(dp, 'sensor', dpLabel, {extra: {val_tpl: t.num, ...common}}));
+            }
+        }
+    }
+
+    if (Object.keys(components).length === 0) {
+        return null;
+    }
+    const avty = [...availability(name, 2)];
+    if (maintenance && maintenance.description.UNREACH && !ignored(iface, maintenance.ADDRESS, 'UNREACH')) {
+        avty.push({t: st(iface, maintenance.ADDRESS, 'UNREACH'), avty_tpl: t.bool('offline', 'online')});
+    }
+    return {
+        id,
+        device: {
+            name: deviceName,
+            mf: 'eQ-3',
+            mdl: device.TYPE,
+            ...(device.FIRMWARE && {sw: String(device.FIRMWARE)}),
+            via_device: bridgeId,
+            ...(rooms.size === 1 && {sa: [...rooms][0]}),
+        },
+        components,
+        availability: avty,
+        availabilityMode: 'all',
+    };
+}
+
+/**
+ * HmIP actuators: a *_TRANSMITTER channel (state) followed by three *_VIRTUAL_RECEIVER channels
+ * (control). The first receiver becomes the control entity with the transmitter's state topic,
+ * the others are secondary (disabled by default) — H-25.
+ */
+export function resolveVirtualReceivers(channels) {
+    const families = [
+        {transmitter: 'switch_state', receiver: 'switch'},
+        {transmitter: 'dimmer_state', receiver: 'dimmer'},
+        {transmitter: 'cover_state', receiver: 'cover'},
+    ];
+    for (const {transmitter, receiver} of families) {
+        let current = null;
+        let count = 0;
+        for (const ch of channels) {
+            if (ch.role === transmitter && /_TRANSMITTER$/.test(ch.TYPE)) {
+                current = ch;
+                count = 0;
+                continue;
+            }
+            if (ch.role === receiver && /_VIRTUAL_RECEIVER$/.test(ch.TYPE) && current) {
+                count += 1;
+                ch.stateChannel = current;
+                if (count === 1) {
+                    current.transmitterFor = ch;
+                } else {
+                    ch.secondary = true;
+                }
+            } else if (ch.role === receiver && /_VIRTUAL_RECEIVER$/.test(ch.TYPE)) {
+                // standalone receiver blocks without a transmitter: first of three is primary
+                count += 1;
+                if (count > 1 && (count - 1) % 3 !== 0) {
+                    ch.secondary = true;
+                }
+            }
+        }
+    }
+    // HM virtual dimmers (HM-LC-Dim1TPBU-FM ch 2/3) are secondaries of channel 1
+    for (const ch of channels) {
+        if (ch.TYPE === 'VIRTUAL_DIMMER') {
+            ch.secondary = true;
+        }
+    }
+}
+
+function prettify(dp) {
+    return dp
+        .toLowerCase()
+        .split('_')
+        .map((w) => (w ? w[0].toUpperCase() + w.slice(1) : w))
+        .join(' ');
+}

package/lib/roles.js

@@ -0,0 +1,183 @@
+/**
+ * Semantic roles of channels and the Home Assistant facts of datapoints — derived from the
+ * paramset descriptions (the CONTROL hint eQ-3 puts on every parameter), channel types as
+ * fallback (ROADMAP H-21). Pure functions and tables, no I/O.
+ */
+
+/** CONTROL hint of a channel's primary datapoint → role; checked in this order */
+export const ROLE_BY_CONTROL = [
+    ['LOCK.STATE', 'lock'],
+    ['HEATING_CONTROL_HMIP.SETPOINT', 'climate_hmip'],
+    ['HEATING_CONTROL.SETPOINT', 'climate_hm'],
+    ['BLIND.LEVEL', 'cover'],
+    ['BLIND_VIRTUAL_RECEIVER.LEVEL', 'cover'],
+    ['SHUTTER_VIRTUAL_RECEIVER.LEVEL', 'cover'],
+    ['BLIND_TRANSMITTER.LEVEL', 'cover_state'],
+    ['SHUTTER_TRANSMITTER.LEVEL', 'cover_state'],
+    ['DIMMER.LEVEL', 'dimmer'],
+    ['DIMMER_REAL.LEVEL', 'dimmer_state'],
+    ['SWITCH.STATE', 'switch'],
+    ['SWITCH_TRANSMITTER.STATE', 'switch_state'],
+    ['DANGER.STATE', 'smoke'],
+    ['DOOR_SENSOR.STATE', 'contact'],
+    ['RHS.STATE', 'rotary_handle'],
+    ['MOTIONDETECTOR_TRANSCEIVER.MOTION_DETECTION_STATE', 'motion'],
+    ['POWERMETER.POWER', 'energy'],
+    ['POWERMETER_PSM.POWER', 'energy'],
+    ['WEATHER_TRANSMIT.ACTUAL_TEMPERATURE', 'weather'],
+    ['BUTTON.SHORT', 'key'],
+    ['BUTTON_NO_FUNCTION.SHORT', 'key'],
+];
+
+/** channel types whose role does not come from a CONTROL hint (older HM devices, maintenance) */
+export const ROLE_BY_TYPE = {
+    MAINTENANCE: 'maintenance',
+    MOTION_DETECTOR: 'motion',
+    PRESENCEDETECTOR_TRANSCEIVER: 'presence',
+    WEATHER: 'weather',
+    SHUTTER_CONTACT: 'contact',
+    TILT_SENSOR: 'contact',
+    WATERDETECTIONSENSOR: 'water',
+    WATER_DETECTION_TRANSMITTER: 'water',
+    SMOKE_DETECTOR: 'smoke',
+    SMOKE_DETECTOR_TEAM: 'smoke',
+    SMOKE_DETECTOR_TEAM_V2: 'smoke',
+    KEY: 'key',
+    VIRTUAL_KEY: 'key',
+    KEY_TRANSCEIVER: 'key',
+    CENTRAL_KEY: 'key',
+    POWERMETER: 'energy',
+    ENERGIE_METER_TRANSMITTER: 'energy',
+    VIRTUAL_DIMMER: 'dimmer',
+};
+
+/**
+ * @param {string} channelType
+ * @param {object} [description] VALUES paramset description of the channel
+ * @returns {string | null}
+ */
+export function channelRole(channelType, description) {
+    if (ROLE_BY_TYPE[channelType] === 'maintenance') {
+        return 'maintenance';
+    }
+    if (description) {
+        const controls = new Set(Object.values(description).map((d) => d && d.CONTROL));
+        for (const [control, role] of ROLE_BY_CONTROL) {
+            if (controls.has(control)) {
+                return role;
+            }
+        }
+    }
+    return ROLE_BY_TYPE[channelType] || null;
+}
+
+/** units as the interface processes send them → Home Assistant */
+export function haUnit(unit) {
+    if (!unit || unit === '""') {
+        return undefined;
+    }
+    const u = String(unit).replace(/�|°/g, '°');
+    return (
+        {
+            '100%': '%',
+            '% rF': '%',
+            Lux: 'lx',
+            degree: '°',
+            '°': '°',
+            min: 'min',
+            s: 's',
+            mA: 'mA',
+        }[u] || u
+    );
+}
+
+/** `100%` values are 0..1 on the wire */
+export function isFraction(description) {
+    return Boolean(description && description.UNIT === '100%');
+}
+
+/**
+ * Home Assistant facts of a datapoint by name: device class, state class, unit override,
+ * entity category, enabled by default. Anything not listed is a plain sensor / binary_sensor,
+ * disabled by default (H-22).
+ */
+export const PARAMETERS = {
+    ACTUAL_TEMPERATURE: {dev_cla: 'temperature', stat_cla: 'measurement', unit: '°C', enabled: true},
+    TEMPERATURE: {dev_cla: 'temperature', stat_cla: 'measurement', unit: '°C', enabled: true},
+    SET_POINT_TEMPERATURE: {dev_cla: 'temperature', unit: '°C'},
+    SET_TEMPERATURE: {dev_cla: 'temperature', unit: '°C'},
+    HUMIDITY: {dev_cla: 'humidity', stat_cla: 'measurement', unit: '%', enabled: true},
+    ACTUAL_HUMIDITY: {dev_cla: 'humidity', stat_cla: 'measurement', unit: '%', enabled: true},
+    ILLUMINATION: {dev_cla: 'illuminance', stat_cla: 'measurement', unit: 'lx', enabled: true},
+    CURRENT_ILLUMINATION: {dev_cla: 'illuminance', stat_cla: 'measurement', unit: 'lx'},
+    AVERAGE_ILLUMINATION: {dev_cla: 'illuminance', stat_cla: 'measurement', unit: 'lx'},
+    BRIGHTNESS: {stat_cla: 'measurement', enabled: true},
+    POWER: {dev_cla: 'power', stat_cla: 'measurement', unit: 'W', enabled: true},
+    CURRENT: {dev_cla: 'current', stat_cla: 'measurement', unit: 'mA', enabled: true},
+    VOLTAGE: {dev_cla: 'voltage', stat_cla: 'measurement', unit: 'V', enabled: true},
+    FREQUENCY: {dev_cla: 'frequency', stat_cla: 'measurement', unit: 'Hz'},
+    ENERGY_COUNTER: {dev_cla: 'energy', stat_cla: 'total_increasing', unit: 'Wh', enabled: true},
+    RAIN_COUNTER: {dev_cla: 'precipitation', stat_cla: 'total_increasing', unit: 'mm', enabled: true},
+    RAINING: {dev_cla: 'moisture', enabled: true},
+    WIND_SPEED: {dev_cla: 'wind_speed', stat_cla: 'measurement', unit: 'km/h', enabled: true},
+    WIND_DIRECTION: {stat_cla: 'measurement', unit: '°', enabled: true},
+    WIND_DIR: {stat_cla: 'measurement', unit: '°', enabled: true},
+    SUNSHINEDURATION: {stat_cla: 'total_increasing', enabled: true},
+    AIR_PRESSURE: {dev_cla: 'atmospheric_pressure', stat_cla: 'measurement', unit: 'hPa', enabled: true},
+    VALVE_STATE: {stat_cla: 'measurement', unit: '%', enabled: true},
+    LEVEL: {stat_cla: 'measurement', unit: '%'},
+    BOOST_STATE: {unit: 'min'},
+    LOW_BAT: {dev_cla: 'battery', ent_cat: 'diagnostic', enabled: true},
+    LOWBAT: {dev_cla: 'battery', ent_cat: 'diagnostic', enabled: true},
+    UNREACH: {dev_cla: 'connectivity', ent_cat: 'diagnostic', inverted: true},
+    STICKY_UNREACH: {dev_cla: 'problem', ent_cat: 'diagnostic'},
+    CONFIG_PENDING: {ent_cat: 'diagnostic'},
+    UPDATE_PENDING: {dev_cla: 'update', ent_cat: 'diagnostic'},
+    DUTY_CYCLE: {dev_cla: 'problem', ent_cat: 'diagnostic'},
+    DUTYCYCLE: {dev_cla: 'problem', ent_cat: 'diagnostic'},
+    SABOTAGE: {dev_cla: 'tamper', ent_cat: 'diagnostic'},
+    ERROR_SABOTAGE: {dev_cla: 'tamper', ent_cat: 'diagnostic'},
+    RSSI_DEVICE: {dev_cla: 'signal_strength', stat_cla: 'measurement', unit: 'dBm', ent_cat: 'diagnostic'},
+    RSSI_PEER: {dev_cla: 'signal_strength', stat_cla: 'measurement', unit: 'dBm', ent_cat: 'diagnostic'},
+    OPERATING_VOLTAGE: {dev_cla: 'voltage', stat_cla: 'measurement', unit: 'V', ent_cat: 'diagnostic'},
+    ERROR_CODE: {ent_cat: 'diagnostic'},
+    WORKING: {dev_cla: 'running'},
+    PROCESS: {dev_cla: 'running'},
+    MOTION: {dev_cla: 'motion', enabled: true},
+    PRESENCE_DETECTION_STATE: {dev_cla: 'occupancy', enabled: true},
+    ALARMSTATE: {dev_cla: 'safety', enabled: true},
+    MOISTURE_DETECTED: {dev_cla: 'moisture', enabled: true},
+    WATERLEVEL_DETECTED: {dev_cla: 'moisture', enabled: true},
+    ON_TIME: {ent_cat: 'config', unit: 's'},
+    RAMP_TIME: {ent_cat: 'config', unit: 's'},
+};
+
+/**
+ * Compiles `--ignore` globs on `<iface>.<channel>.<datapoint>` (`*` any characters, `?` one).
+ * @param {string | string[]} patterns comma separated or array
+ * @returns {(iface: string, channel: string, datapoint: string) => boolean}
+ */
+export function compileIgnore(patterns) {
+    const list = (Array.isArray(patterns) ? patterns : String(patterns || '').split(','))
+        .map((p) => p.trim())
+        .filter(Boolean)
+        .map(
+            (p) =>
+                new RegExp(
+                    '^' +
+                        p
+                            .replace(/[.+^${}()|[\]\\]/g, '\\$&')
+                            .replace(/\*/g, '.*')
+                            .replace(/\?/g, '.') +
+                        '$',
+                    'i',
+                ),
+        );
+    if (list.length === 0) {
+        return () => false;
+    }
+    return (iface, channel, datapoint) => {
+        const name = `${iface}.${channel}.${datapoint}`;
+        return list.some((re) => re.test(name));
+    };
+}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "hm2mqtt",
-  "version": "3.0.0",
+  "version": "3.2.0",
   "description": "Interface between Homematic CCU and MQTT",
   "type": "module",
   "main": "index.js",