hivecode-mcp 0.14.5 → 0.14.6

package/README.md

@@ -16,7 +16,7 @@ earlier point.
 ## How it works
 
 1. Someone creates a **room** and gets a **join link**, like
-   `wss://hivecode-relay.onrender.com|room-a1b2c3d4e5`
+   `wss://livecode-xoss.onrender.com|room-a1b2c3d4e5`
 2. Everyone — people and agents — joins with that link.
 3. Each agent works in **its own folder**. Hivecode keeps every folder identical, live.
 4. An agent **claims** a file before editing it and **releases** it after. While someone
@@ -88,7 +88,7 @@ Then:
    Customizations → MCP Servers → refresh. For Claude Code, start a new session.
 2. **Paste this to your agent**, with the link you were sent and a name:
 
-   > Use your hive_join tool to join the Hivecode room `wss://hivecode-relay.onrender.com|room-a1b2c3d4e5`
+   > Use your hive_join tool to join the Hivecode room `wss://livecode-xoss.onrender.com|room-a1b2c3d4e5`
    > as **Alice-AI**. Then follow the rules it gives you.
 
 The agent's files go in `~/hivecode/<room>/<name>`, a folder of its own. To use a particular
@@ -124,12 +124,12 @@ If it says **NOT JOINED** instead, see [Troubleshooting](#troubleshooting).
 
 You don't need to install anything to watch and steer.
 
-1. Open the Control Room: **https://hivecode-relay.onrender.com/control**
+1. Open the Control Room: **https://livecode-xoss.onrender.com/control**
 2. Paste the join link, type your name, and press **Enter room**.
 
 To skip the pasting, put the link after a `#` in the address — the room is filled in and you
 only type your name:
-`https://hivecode-relay.onrender.com/control#wss://hivecode-relay.onrender.com|room-a1b2c3d4e5`
+`https://livecode-xoss.onrender.com/control#wss://livecode-xoss.onrender.com|room-a1b2c3d4e5`
 
 From there you can:
 
@@ -366,7 +366,7 @@ you prompt it: tell it to check the room.
 | `setup` printed `FAILED` for an app | that app's config could not be written, or what was written does not start | the reason is on the same line, and the entry to add by hand is printed below it |
 | `npx` stops with `ENOENT` and `AppData\Roaming\npm` (Windows) | that folder is missing, which happens on some fresh Node installs, and npm gives up before Hivecode starts | create it with `mkdir "$env:APPDATA\npm"` in PowerShell (`mkdir "%APPDATA%\npm"` in cmd), then run setup again |
 | `'room-…' is not recognized` or `command not found: room-…` | a join link was pasted into a terminal without quotes | give the link to your agent instead; if you pass it to `setup`, quote it |
-| `NOT JOINED` and the address `livecode-xoss.onrender.com` | an old Hivecode version, still cached by `npx` | put `hivecode-mcp@latest` in your agent's config and restart it |
+| `NOT JOINED` and the address `hivecode-relay.onrender.com` | an old Hivecode version, still cached by `npx` | put `hivecode-mcp@latest` in your agent's config and restart it |
 | `Q430` | the relay is out of sockets | try again shortly; clients on the older one-socket-per-file transport (the VS Code extension, the browser panel) can lower `HIVE_MAX_OPEN_FILES` |
 | `Q438` | the relay holds as many open files as it is sized for | try again shortly, or ask whoever runs the relay to raise `HIVE_MAX_CHANNELS_TOTAL` |
 | `Q431` | this room is full | fewer participants in one room, or ask whoever runs the relay to raise `HIVE_SEATS` |

package/docs/MCP.md

@@ -16,7 +16,7 @@ the runtime copy that `setup` installs:
     "hivecode": {
       "command": "node",
       "args": ["<your home>/.hivecode/runtime/<version>/node_modules/hivecode-mcp/hive-mcp.js"],
-      "env": { "HIVE_RELAY": "wss://hivecode-relay.onrender.com" }
+      "env": { "HIVE_RELAY": "wss://livecode-xoss.onrender.com" }
     }
   }
 }

package/docs/SLACK_SETUP.md

@@ -110,24 +110,24 @@ Once `slack check` passes, you can also run `--dry-run` on `slack start` or `git
 **macOS / Linux (bash, zsh):**
 ```bash
 # 1. Verify token and channel membership first
-SLACK_BOT_TOKEN=xoxb-… npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --dry-run
+SLACK_BOT_TOKEN=xoxb-… npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --dry-run
 
 # 2. Start the live bridge
-SLACK_BOT_TOKEN=xoxb-… npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789
+SLACK_BOT_TOKEN=xoxb-… npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789
 ```
 
 **Windows (PowerShell):**
 ```powershell
 $env:SLACK_BOT_TOKEN="xoxb-…"
-npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --dry-run
-npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789
+npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --dry-run
+npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789
 ```
 
 **Windows (Command Prompt / `cmd.exe`):**
 ```cmd
 set SLACK_BOT_TOKEN=xoxb-…
-npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --dry-run
-npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789
+npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --dry-run
+npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789
 ```
 
 ---
@@ -284,14 +284,14 @@ What to know about polling:
 
 macOS / Linux (bash, zsh):
 ```bash
-SLACK_BOT_TOKEN=xoxb-… SLACK_APP_TOKEN=xapp-… npx -y hivecode-mcp@latest slack agent "wss://hivecode-relay.onrender.com|room-abc123" --channel D0123456789 --allow U012ABCDEF
+SLACK_BOT_TOKEN=xoxb-… SLACK_APP_TOKEN=xapp-… npx -y hivecode-mcp@latest slack agent "wss://livecode-xoss.onrender.com|room-abc123" --channel D0123456789 --allow U012ABCDEF
 ```
 
 Windows (PowerShell):
 ```powershell
 $env:SLACK_BOT_TOKEN="xoxb-…"
 $env:SLACK_APP_TOKEN="xapp-…"
-npx -y hivecode-mcp@latest slack agent "wss://hivecode-relay.onrender.com|room-abc123" --channel D0123456789 --allow U012ABCDEF
+npx -y hivecode-mcp@latest slack agent "wss://livecode-xoss.onrender.com|room-abc123" --channel D0123456789 --allow U012ABCDEF
 ```
 
 <details>
@@ -366,24 +366,24 @@ Paste the contents of [`slack-app-manifest-agent.json`](../slack-app-manifest-ag
 
 **macOS / Linux (bash, zsh):**
 ```bash
-SLACK_BOT_TOKEN=xoxb-… SLACK_APP_TOKEN=xapp-… npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF --dry-run
-SLACK_BOT_TOKEN=xoxb-… SLACK_APP_TOKEN=xapp-… npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF
+SLACK_BOT_TOKEN=xoxb-… SLACK_APP_TOKEN=xapp-… npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF --dry-run
+SLACK_BOT_TOKEN=xoxb-… SLACK_APP_TOKEN=xapp-… npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF
 ```
 
 **Windows (PowerShell):**
 ```powershell
 $env:SLACK_BOT_TOKEN="xoxb-…"
 $env:SLACK_APP_TOKEN="xapp-…"
-npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF --dry-run
-npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF
+npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF --dry-run
+npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF
 ```
 
 **Windows (Command Prompt / `cmd.exe`):**
 ```cmd
 set SLACK_BOT_TOKEN=xoxb-…
 set SLACK_APP_TOKEN=xapp-…
-npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF --dry-run
-npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF
+npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF --dry-run
+npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF
 ```
 
 ### Slackbot Remote MCP Server (`hive-mcp-http.js`)
@@ -400,14 +400,14 @@ If you connect Slackbot's remote MCP client over Streamable HTTP (`hive-mcp-http
 
 **macOS / Linux (bash, zsh):**
 ```bash
-SLACK_SIGNING_SECRET=… SLACK_BOT_TOKEN=xoxb-… npx -y hivecode-mcp@latest slack mcp-server "wss://hivecode-relay.onrender.com|room-abc123" --port 8790 --allow U012ABCDEF
+SLACK_SIGNING_SECRET=… SLACK_BOT_TOKEN=xoxb-… npx -y hivecode-mcp@latest slack mcp-server "wss://livecode-xoss.onrender.com|room-abc123" --port 8790 --allow U012ABCDEF
 ```
 
 **Windows (PowerShell):**
 ```powershell
 $env:SLACK_SIGNING_SECRET="…"
 $env:SLACK_BOT_TOKEN="xoxb-…"
-npx -y hivecode-mcp@latest slack mcp-server "wss://hivecode-relay.onrender.com|room-abc123" --port 8790 --allow U012ABCDEF
+npx -y hivecode-mcp@latest slack mcp-server "wss://livecode-xoss.onrender.com|room-abc123" --port 8790 --allow U012ABCDEF
 ```
 
 **What a First-Time User Sees Step by Step (`hive-mcp-http.js`):**
@@ -447,8 +447,8 @@ Use these 5 steps to demonstrate either **GitHub-to-Slack issue threads** (`gith
      ```powershell
      $env:SLACK_BOT_TOKEN="xoxb-…"
      $env:SLACK_APP_TOKEN="xapp-…"
-     npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF --dry-run
-     npx -y hivecode-mcp@latest slack start "wss://hivecode-relay.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF
+     npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF --dry-run
+     npx -y hivecode-mcp@latest slack start "wss://livecode-xoss.onrender.com|room-abc123" --channel C0123456789 --allow U012ABCDEF
      ```
 4. **Trigger a Thread**:
    - **In Flow A**: Add the `hivecode` label to a GitHub issue. Watch Slack open a single thread (`#12 — Title`) for that issue and post run progress inside it.

package/hive-privacy.js

@@ -14,7 +14,7 @@
 //
 //   1. A VERDICT on every join, so "am I private?" is answered without being asked.
 //      Printing the URL is not a verdict. A person who has never run a relay cannot tell
-//      wss://livecode-xoss.onrender.com from wss://relay.theircompany.com by looking.
+//      wss://hivecode-relay.onrender.com from wss://relay.theircompany.com by looking.
 //
 //   2. A PIN that REFUSES. A verdict you have to read is a verdict that gets skimmed, and
 //      an agent does not read banners at all. HIVE_RELAY_PIN says "this machine may only
@@ -34,13 +34,15 @@
 // sent that client to a dead host, or made this module call the live default "YOUR RELAY".
 // Every client now imports it from here. The extension's JSON setting cannot import, so
 // extension-privacy-parity-test pins it equal to this value instead.
-export const PUBLIC_DEFAULT_RELAY = 'wss://hivecode-relay.onrender.com'
+export const PUBLIC_DEFAULT_RELAY = 'wss://livecode-xoss.onrender.com'
 
+// 10 Nov 2026: the hosted relay moved back to livecode-xoss (its first address, live again) when the
+// hivecode-relay account ran out of hours for the month, so the two addresses below swapped places.
 // Relays this project has run publicly and retired. A .hive.json written before a move still
 // names the old one, and if that host ever answers again (a reactivated account, a squatter
 // on the name) the verdict must still say PUBLIC -- not "YOUR RELAY", which is what any host
 // outside this list is called.
-export const RETIRED_PUBLIC_RELAYS = ['wss://livecode-xoss.onrender.com']
+export const RETIRED_PUBLIC_RELAYS = ['wss://hivecode-relay.onrender.com']
 
 /**
  * The relay a client should actually dial for a URL it was handed.

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "hivecode-mcp",
-  "version": "0.14.5",
+  "version": "0.14.6",
   "description": "MCP server that lets any AI coding agent join a Hivecode room — humans and multiple AI agents edit one live codebase with folder-scoped permissions and approval gates.",
   "type": "module",
   "license": "MIT",