highcharts 13.0.2 → 13.1.0

package/options/tilemap.src.d.ts

@@ -82,6 +82,25 @@ declare module "../highcharts.src" {
          */
         valueSuffix?: string;
     }
+    /**
+     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
+     * animation when a series is displayed for the `dataLabels`. The animation
+     * can also be set as a configuration object. Please note that this option
+     * only applies to the initial animation.
+     *
+     * For other animations, see chart.animation and the animation parameter
+     * under the API methods. The following properties are supported:
+     *
+     * - `defer`: The animation delay time in milliseconds.
+     */
+    interface PlotTilemapDataLabelsAnimationOptions {
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
+         * milliseconds. Set to `0` to render the data labels immediately. As
+         * `undefined` inherits defer time from the series.animation.defer.
+         */
+        defer?: number;
+    }
     /**
      * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
      * labels, appearing next to each data point.
@@ -379,6 +398,14 @@ declare module "../highcharts.src" {
          */
         zIndex?: number;
     }
+    /**
+     * (Highcharts, Highstock, Gantt) Styles for the series label. The color
+     * defaults to the series color, or a contrast color if `onArea`.
+     */
+    interface PlotTilemapLabelStyleOptions {
+        fontSize?: number;
+        fontWeight?: string;
+    }
     /**
      * (Highcharts, Highmaps) Options for the connector in the _Series on point_
      * feature.
@@ -402,6 +429,31 @@ declare module "../highcharts.src" {
          */
         width?: number;
     }
+    /**
+     * (Highcharts, Highmaps) Options for the _Series on point_ feature. Only
+     * `pie` and `sunburst` series are supported at this moment.
+     */
+    interface PlotTilemapOnPointOptions {
+        /**
+         * (Highcharts, Highmaps) Options for the connector in the _Series on
+         * point_ feature.
+         *
+         * In styled mode, the connector can be styled with the
+         * `.highcharts-connector-seriesonpoint` class name.
+         */
+        connectorOptions?: (Highcharts.PlotTilemapOnPointConnectorOptions|Highcharts.SVGAttributes);
+        /**
+         * (Highcharts, Highmaps) The `id` of the point that we connect the
+         * series to. Only points with a given `plotX` and `plotY` values and
+         * map points are valid.
+         */
+        id?: string;
+        /**
+         * (Highcharts, Highmaps) Options allowing to set a position and an
+         * offset of the series in the _Series on point_ feature.
+         */
+        position?: (object|Highcharts.PlotTilemapOnPointPositionOptions);
+    }
     /**
      * (Highcharts, Highmaps) Options allowing to set a position and an offset
      * of the series in the _Series on point_ feature.
@@ -430,6 +482,508 @@ declare module "../highcharts.src" {
          */
         y?: number;
     }
+    /**
+     * (Highcharts, Highmaps) A tilemap series is a type of heatmap where the
+     * tile shapes are configurable.
+     *
+     * Configuration options for the series are given in three levels:
+     *
+     * 1. Options for all series in a chart are defined in the
+     * plotOptions.series object.
+     *
+     * 2. Options for all `tilemap` series are defined in plotOptions.tilemap.
+     *
+     * 3. Options for one single series are given in the series instance array.
+     * (see online documentation for example)
+     *
+     * **TypeScript:**
+     *
+     * - type option should always be set, otherwise a broad set of unsupported
+     * options is allowed.
+     *
+     * - when accessing an array of series, the combined set of all series types
+     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
+     * specific type can be done by checking the `type` property. (see online
+     * documentation for example)
+     */
+    interface PlotTilemapOptions {
+        /**
+         * (Highcharts, Highmaps) Accessibility options for a series.
+         */
+        accessibility?: Highcharts.SeriesAccessibilityOptionsObject;
+        /**
+         * (Highcharts, Highmaps) Allow this series' points to be selected by
+         * clicking on the graphic (columns, point markers, pie slices, map
+         * areas etc).
+         *
+         * The selected points can be handled by point select and unselect
+         * events, or collectively by the getSelectedPoints function.
+         *
+         * And alternative way of selecting points is through dragging.
+         */
+        allowPointSelect?: boolean;
+        /**
+         * (Highcharts, Highmaps) Animation is disabled by default on the
+         * heatmap series.
+         */
+        animation?: boolean;
+        /**
+         * (Highmaps) The border color of the map areas.
+         *
+         * In styled mode, the border stroke is given in the `.highcharts-point`
+         * class.
+         */
+        borderColor?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highmaps) The border radius for each heatmap item. The
+         * border's color and width can be set in marker options.
+         */
+        borderRadius?: number;
+        /**
+         * (Highmaps) The border width for each heatmap item.
+         */
+        borderWidth?: number;
+        /**
+         * (Highcharts, Highmaps) An additional class name to apply to the
+         * series' graphical elements. This option does not replace default
+         * class names of the graphical element. Changes to the series' color
+         * will also be reflected in a chart's legend and tooltip.
+         */
+        className?: string;
+        /**
+         * (Highcharts, Highmaps) Disable this option to allow series rendering
+         * in the whole plotting area.
+         *
+         * **Note:** Clipping should be always enabled when chart.zoomType is
+         * set
+         */
+        clip?: boolean;
+        /**
+         * (Highcharts) The main color of the series. In heat maps this color is
+         * rarely used, as we mostly use the color to denote the value of each
+         * point. Unless options are set in the colorAxis, the default value is
+         * pulled from the options.colors array.
+         */
+        color?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highstock, Highmaps) When using dual or multiple color
+         * axes, this number defines which colorAxis the particular series is
+         * connected to. It refers to either the axis id or the index of the
+         * axis in the colorAxis array, with 0 being the first. Set this option
+         * to false to prevent a series from connecting to the default color
+         * axis.
+         *
+         * Since v7.2.0 the option can also be an axis id or an axis index
+         * instead of a boolean flag.
+         */
+        colorAxis?: (boolean|number|string);
+        /**
+         * (Highcharts, Highmaps) Styled mode only. A specific color index to
+         * use for the series, so its graphic representations are given the
+         * class name `highcharts-color-{n}`.
+         *
+         * Since v11, CSS variables on the form `--highcharts-color-{n}` make
+         * changing the color scheme very convenient.
+         */
+        colorIndex?: number;
+        /**
+         * (Highcharts, Highstock, Highmaps) Determines what data value should
+         * be used to calculate point color if `colorAxis` is used. Requires to
+         * set `min` and `max` if some custom point property is used or if
+         * approximation for data grouping is set to `'sum'`.
+         */
+        colorKey?: string;
+        /**
+         * (Highcharts, Highmaps) The column size - how many X axis units each
+         * column in the tilemap should span. Works as in Heatmaps.
+         */
+        colsize?: number;
+        /**
+         * (Highcharts, Highstock, Gantt) When true, each point or column edge
+         * is rounded to its nearest pixel in order to render sharp on screen.
+         * In some cases, when there are a lot of densely packed columns, this
+         * leads to visible difference in column widths or distance between
+         * columns. In these cases, setting `crisp` to `false` may look better,
+         * even though each column is rendered blurry.
+         */
+        crisp?: boolean;
+        /**
+         * (Highcharts, Highmaps) You can set the cursor to "pointer" if you
+         * have click events attached to the series, to signal to the user that
+         * the points and lines can be clicked.
+         *
+         * In styled mode, the series cursor can be set with the same classes as
+         * listed under series.color.
+         */
+        cursor?: (string|Highcharts.CursorValue);
+        /**
+         * (Highcharts, Highmaps) A reserved subspace to store options and
+         * values for customized functionality. Here you can add additional data
+         * for your own event callbacks and formatter callbacks.
+         */
+        custom?: Highcharts.Dictionary<any>;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) Options for the series data
+         * labels, appearing next to each data point.
+         *
+         * Since v6.2.0, multiple data labels can be applied to each single
+         * point by defining them as an array of configs.
+         *
+         * In styled mode, the data labels can be styled with the
+         * `.highcharts-data-label-box` and `.highcharts-data-label` class names
+         * (see example).
+         */
+        dataLabels?: (Highcharts.PlotTilemapDataLabelsOptions|Array<Highcharts.PlotTilemapDataLabelsOptions>);
+        /**
+         * (Highcharts, Highmaps) The mapping between the data table and the
+         * series data points. This is used in conjunction with the `dataTable`
+         * option (on chart or series level) to map columns from the data table
+         * to the properties of the data points. The keys of the `dataMapping`
+         * object correspond to the properties of the data points (e.g. `x`,
+         * `y`, `name`), and the values are objects that specify which column
+         * from which data table to use for that property.
+         *
+         * The keys can also be nested paths, for example `dataLabel.format`, to
+         * map to nested properties of the data points.
+         *
+         * The values can also be strings, in which case they are interpreted as
+         * column id's from the first data table.
+         *
+         * A typical use case is that multiple series share a common column,
+         * like `name` or `x`. In this case, to avoid repetition, the common
+         * column can be applied in `plotOptions.series.dataMapping` and the
+         * individual series can specify only the columns that are unique to
+         * them.
+         *
+         * The series name defaults to the column ID of the main data column in
+         * the mapping. The main data column is typically the `y` data for
+         * cartesian series, or `value` for map series. For example, if the
+         * mapping is `{ y: 'Cost' }`, the series name will be `Cost`. (see
+         * online documentation for example)
+         *
+         * If the columns of the DataTable have keys matching the series keys,
+         * the data mapping is not necessary. For example, this DataTable will
+         * connect directly to the series' `x` and `y` keys: (see online
+         * documentation for example)
+         */
+        dataMapping?: Highcharts.DataMappingOptionsObject;
+        /**
+         * (Highcharts, Highmaps) Options for a specific series-level data table
+         * or an array of data tables. The `dataTable` option can be either a
+         * configuration object or an instance of the `DataTable` class. If a
+         * `DataTable` instance is passed, it will be used directly. If a
+         * configuration object or an array is passed, a new `DataTable`
+         * instance will be created based on the provided configuration.
+         */
+        dataTable?: (Highcharts.DataTable|Highcharts.DataTableOptionsObject|Array<(Highcharts.DataTable|Highcharts.DataTableOptionsObject)>);
+        /**
+         * (Highcharts, Highmaps) Deprecated. Use
+         * plotOptions.series.accessibility.description instead.
+         *
+         * A description of the series to add to the screen reader information
+         * about the series.
+         *
+         * @deprecated 8.0.0
+         */
+        description?: string;
+        /**
+         * (Highcharts, Highmaps) Enable or disable the mouse tracking for a
+         * specific series. This includes point tooltips and click events on
+         * graphs and points. For large datasets it improves performance.
+         */
+        enableMouseTracking?: boolean;
+        /**
+         * (Highcharts, Highmaps) General event handlers for the series items.
+         * These event hooks can also be attached to the series at run time
+         * using the `Highcharts.addEvent` function.
+         */
+        events?: Highcharts.SeriesEventsOptionsObject;
+        /**
+         * (Highcharts, Highstock) Defines when to display a gap in the graph,
+         * together with the gapUnit option.
+         *
+         * In case when `dataGrouping` is enabled, points can be grouped into a
+         * larger time span. This can make the grouped points to have a greater
+         * distance than the absolute value of `gapSize` property, which will
+         * result in disappearing graph completely. To prevent this situation
+         * the mentioned distance between grouped points is used instead of
+         * previously defined `gapSize`.
+         *
+         * In practice, this option is most often used to visualize gaps in time
+         * series. In a stock chart, intraday data is available for daytime
+         * hours, while gaps will appear in nights and weekends.
+         */
+        gapSize?: number;
+        /**
+         * (Highcharts, Highstock) Together with gapSize, this option defines
+         * where to draw gaps in the graph.
+         *
+         * When the `gapUnit` is `"relative"` (default), a gap size of 5 means
+         * that if the distance between two points is greater than 5 times that
+         * of the two closest points, the graph will be broken.
+         *
+         * When the `gapUnit` is `"value"`, the gap is based on absolute axis
+         * values, which on a datetime axis is milliseconds. This also applies
+         * to the navigator series that inherits gap options from the base
+         * series.
+         */
+        gapUnit?: Highcharts.OptionsGapUnitValue;
+        /**
+         * (Highcharts, Highmaps) Highlight only the hovered point and fade the
+         * remaining points.
+         *
+         * Scatter-type series require enabling the 'inactive' marker state and
+         * adjusting opacity. Note that this approach could affect performance
+         * with large datasets.
+         */
+        inactiveOtherPoints?: boolean;
+        /**
+         * (Highcharts, Highmaps) When set to `false` will prevent the series
+         * data from being included in any form of data export.
+         *
+         * Since version 6.0.0 until 7.1.0 the option was existing undocumented
+         * as `includeInCSVExport`.
+         */
+        includeInDataExport?: boolean;
+        /**
+         * (Highcharts, Highmaps) Make the heatmap render its data points as an
+         * interpolated image.
+         */
+        interpolation?: boolean;
+        /**
+         * (Highcharts, Highmaps) An array specifying which option maps to which
+         * key in the data point array. This makes it convenient to work with
+         * unstructured data arrays from different sources.
+         */
+        keys?: Array<string>;
+        /**
+         * (Highcharts, Highstock, Gantt) Series labels are placed as close to
+         * the series as possible in a natural way, seeking to avoid other
+         * series. The goal of this feature is to make the chart more easily
+         * readable, like if a human designer placed the labels in the optimal
+         * position.
+         *
+         * The series labels currently work with series types having a `graph`
+         * or an `area`.
+         */
+        label?: Highcharts.SeriesLabelOptionsObject;
+        /**
+         * (Highcharts, Highmaps) What type of legend symbol to render for this
+         * series. Can be one of `areaMarker`, `lineMarker` or `rectangle`.
+         */
+        legendSymbol?: Highcharts.OptionsLegendSymbolValue;
+        /**
+         * (Highcharts, Highstock, Gantt) The id of another series to link to.
+         * Additionally, the value can be ":previous" to link to the previous
+         * series. When two series are linked, only the first one appears in the
+         * legend. Toggling the visibility of this also toggles the linked
+         * series.
+         *
+         * If master series uses data sorting and linked series does not have
+         * its own sorting definition, the linked series will be sorted in the
+         * same order as the master one.
+         *
+         * If a `compare` value is not set on a linked series, it will be
+         * inherited from the parent series.
+         */
+        linkedTo?: string;
+        marker?: any;
+        /**
+         * (Highcharts, Highmaps) The color for the parts of the graph or points
+         * that are below the threshold. Note that `zones` takes precedence over
+         * the negative color. Using `negativeColor` is equivalent to applying a
+         * zone with value of 0.
+         */
+        negativeColor?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highmaps) The color applied to null points. In styled
+         * mode, a general CSS class is applied instead.
+         */
+        nullColor?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highstock) Whether or not data-points with the value of
+         * `null` should be interactive. When this is set to `true`, tooltips
+         * may highlight these points, and this option also enables keyboard
+         * navigation for such points. Format options for such points include
+         * `nullFormat` and `nullFormatter`. Works for these series: `line`,
+         * `spline`, `area`, `area-spline`, `column`, `bar`, and `timeline`.
+         */
+        nullInteraction?: (boolean|undefined);
+        /**
+         * (Highcharts, Highmaps) Options for the _Series on point_ feature.
+         * Only `pie` and `sunburst` series are supported at this moment.
+         */
+        onPoint?: (object|Highcharts.PlotTilemapOnPointOptions);
+        /**
+         * (Highcharts, Highmaps) Opacity of a series parts: line, fill (e.g.
+         * area) and dataLabels.
+         */
+        opacity?: number;
+        /**
+         * (Highcharts, Highmaps) Properties for each single point.
+         */
+        point?: Highcharts.PlotSeriesPointOptions;
+        /**
+         * (Highcharts, Highmaps) Deprecated. Use
+         * series.accessibility.point.descriptionFormat instead.
+         *
+         * Same as accessibility.point.descriptionFormat, but for an individual
+         * series. Overrides the chart wide configuration.
+         *
+         * @deprecated 12.6.0
+         */
+        pointDescriptionFormat?: Function;
+        /**
+         * (Highcharts, Highmaps) Deprecated. Use
+         * series.accessibility.point.descriptionFormatter instead.
+         *
+         * Same as accessibility.series.descriptionFormatter, but for an
+         * individual series. Overrides the chart wide configuration.
+         *
+         * @deprecated 8.0.0
+         */
+        pointDescriptionFormatter?: Function;
+        /**
+         * (Highcharts, Highmaps) The padding between points in the tilemap.
+         */
+        pointPadding?: number;
+        /**
+         * (Highcharts, Highstock) When true, X values in the data set are
+         * relative to the current `pointStart`, `pointInterval` and
+         * `pointIntervalUnit` settings. This allows compression of the data for
+         * datasets with irregular X values.
+         *
+         * The real X values are computed on the formula `f(x) = ax + b`, where
+         * `a` is the `pointInterval` (optionally with a time unit given by
+         * `pointIntervalUnit`), and `b` is the `pointStart`.
+         */
+        relativeXValue?: boolean;
+        /**
+         * (Highcharts, Highmaps) The row size - how many Y axis units each
+         * tilemap row should span. Analogous to colsize.
+         */
+        rowsize?: number;
+        /**
+         * (Highcharts, Highmaps) Whether to select the series initially. If
+         * `showCheckbox` is true, the checkbox next to the series name in the
+         * legend will be checked for a selected series.
+         */
+        selected?: boolean;
+        /**
+         * (Highcharts, Highmaps) If true, a checkbox is displayed next to the
+         * legend item to allow selecting the series. The state of the checkbox
+         * is determined by the `selected` option.
+         */
+        showCheckbox?: boolean;
+        /**
+         * (Highcharts, Highmaps) Whether to display this particular series or
+         * series type in the legend. Standalone series are shown in legend by
+         * default, and linked series are not. Since v7.2.0 it is possible to
+         * show series that use colorAxis by setting this option to `true`.
+         */
+        showInLegend?: boolean;
+        /**
+         * (Highcharts, Highmaps) Deprecated. Use
+         * series.accessibility.keyboardNavigation instead.
+         *
+         * If set to `true`, the accessibility module will skip past the points
+         * in this series for keyboard navigation.
+         *
+         * @deprecated 8.0.0
+         */
+        skipKeyboardNavigation?: boolean;
+        /**
+         * (Highcharts, Highmaps) Sonification/audio chart options for a series.
+         */
+        sonification?: Highcharts.SeriesSonificationOptions;
+        /**
+         * (Highcharts, Highmaps) A collection of options for different series
+         * states.
+         *
+         * In addition to the options documented under each state, any option
+         * from the parent series type can be set, with exception of `data` and
+         * `states`.
+         */
+        states?: Highcharts.SeriesStatesOptionsObject;
+        /**
+         * (Highcharts, Highstock, Highmaps) Sticky tracking of mouse events.
+         * When true, the `mouseOut` event on a series isn't triggered until the
+         * mouse moves over another series, or out of the plot area. When false,
+         * the `mouseOut` event on a series is triggered when the mouse leaves
+         * the area around the series' graph or markers. This also implies the
+         * tooltip. When `stickyTracking` is false and `tooltip.shared` is
+         * false, the tooltip will be hidden when moving the mouse between
+         * series.
+         */
+        stickyTracking?: boolean;
+        /**
+         * (Highcharts, Highmaps) The shape of the tiles in the tilemap.
+         * Possible values are `hexagon`, `circle`, `diamond`, and `square`.
+         */
+        tileShape?: Highcharts.TilemapShapeValue;
+        /**
+         * (Highcharts, Highstock, Highmaps) A configuration object for the
+         * tooltip rendering of each single series. Properties are inherited
+         * from tooltip. Overridable properties are `headerFormat`,
+         * `pointFormat`, `yDecimals`, `xDateFormat`, `yPrefix` and `ySuffix`.
+         * Unlike other series, in a scatter plot the series.name by default
+         * shows in the headerFormat and point.x and point.y in the pointFormat.
+         */
+        tooltip?: Highcharts.SeriesTooltipOptionsObject;
+        /**
+         * (Highcharts, Highstock, Gantt) When a series contains a `data` array
+         * that is longer than this, the Series class looks for data
+         * configurations of plain numbers or arrays of numbers. The first and
+         * last valid points are checked. If found, the rest of the data is
+         * assumed to be the same. This saves expensive data checking and
+         * indexing in long series, and makes data-heavy charts render faster.
+         *
+         * Set it to `0` disable.
+         *
+         * Note:
+         *
+         * - In boost mode turbo threshold is forced. Only array of numbers or
+         * two dimensional arrays are allowed.
+         *
+         * - In version 11.4.3 and earlier, if object configurations were passed
+         * beyond the turbo threshold, a warning was logged in the console and
+         * the data series didn't render.
+         */
+        turboThreshold?: number;
+        /**
+         * (Highcharts, Highmaps) Set the initial visibility of the series.
+         */
+        visible?: boolean;
+        /**
+         * (Highmaps) Define the z index of the series.
+         */
+        zIndex?: number;
+        /**
+         * (Highcharts, Highstock) Defines the Axis on which the zones are
+         * applied.
+         */
+        zoneAxis?: string;
+        /**
+         * (Highcharts, Highstock) An array defining zones within a series.
+         * Zones can be applied to the X axis, Y axis or Z axis for bubbles,
+         * according to the `zoneAxis` option. The zone definitions have to be
+         * in ascending order regarding to the value.
+         *
+         * In styled mode, the color zones are styled with the
+         * `.highcharts-zone-{n}` class, or custom classed from the `className`
+         * option (view live demo).
+         */
+        zones?: Array<Highcharts.SeriesZonesOptionsObject>;
+        /**
+         * (Highcharts, Highmaps) Whether to zoom non-cartesian series. If
+         * `chart.zooming` is set, the option allows to disable zooming on an
+         * individual non-cartesian series. By default zooming is enabled for
+         * all series.
+         *
+         * **Note**: This option works only for non-cartesian series.
+         */
+        zoomEnabled?: boolean;
+    }
     /**
      * (Highcharts, Highstock) Animation setting for hovering the graph in
      * line-type series.
@@ -442,6 +996,13 @@ declare module "../highcharts.src" {
          */
         duration?: number;
     }
+    /**
+     * (Highcharts, Highstock) A collection of SVG attributes to override the
+     * appearance of the halo, for example `fill`, `stroke` and `stroke-width`.
+     */
+    interface PlotTilemapStatesHoverHaloAttributesOptions {
+        zIndex?: number;
+    }
     /**
      * (Highcharts, Highstock) Animation when not hovering over the marker.
      */
@@ -453,6 +1014,18 @@ declare module "../highcharts.src" {
          */
         duration?: number;
     }
+    /**
+     * (Highcharts, Highstock) Animation setting for hovering the graph in
+     * line-type series.
+     */
+    interface PlotTilemapStatesSelectAnimationOptions {
+        /**
+         * (Highcharts, Highstock) The duration of the hover animation in
+         * milliseconds. By default the hover state animates quickly in, and
+         * slowly back to normal.
+         */
+        duration?: number;
+    }
     /**
      * (Highcharts, Highstock, Gantt) For series on datetime axes, the date
      * format in the tooltip's header will by default be guessed based on the
@@ -470,6 +1043,50 @@ declare module "../highcharts.src" {
         week?: string;
         year?: string;
     }
+    /**
+     * (Highcharts, Highstock, Highmaps) Options for the tooltip header when
+     * tooltip.split is enabled. The header is the box containing the X value in
+     * a split tooltip.
+     */
+    interface PlotTilemapTooltipHeaderOptions {
+        /**
+         * (Highcharts, Highstock, Highmaps) Background color for the tooltip
+         * header when tooltip.split is enabled.
+         */
+        backgroundColor?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highstock, Highmaps) Border color for the tooltip header
+         * when tooltip.split is enabled.
+         */
+        borderColor?: Highcharts.ColorType;
+        /**
+         * (Highcharts, Highstock, Highmaps) The width of the border for the
+         * tooltip header when tooltip.split is enabled.
+         */
+        borderWidth?: number;
+        /**
+         * (Highcharts, Highstock, Highmaps) Distance between the plot area and
+         * the header (except the chevron) in a split tooltip, in pixels. The
+         * default value makes the header text align with the axis labels.
+         */
+        distance?: number;
+        /**
+         * (Highcharts, Highstock, Highmaps) The name of a symbol to use for the
+         * border around the tooltip header. Applies only when tooltip.split is
+         * enabled.
+         *
+         * Custom callbacks for symbol path generation can also be added to
+         * `Highcharts.SVGRenderer.prototype.symbols` the same way as for
+         * series.marker.symbol.
+         */
+        shape?: string;
+        /**
+         * (Highcharts, Highstock, Highmaps) CSS styles for the tooltip header.
+         * The default is `{ fontSize: '1em' }`, ensuring that the header text
+         * is the same size as the axis labels.
+         */
+        style?: object;
+    }
     /**
      * (Highcharts, Highstock, Highmaps) Positioning options for fixed tooltip,
      * taking effect only when tooltip.fixed is `true`.
@@ -526,4 +1143,74 @@ declare module "../highcharts.src" {
          */
         defer?: number;
     }
+    /**
+     * (Highcharts, Highmaps) A `tilemap` series. If the type option is not
+     * specified, it is inherited from chart.type.
+     *
+     * Configuration options for the series are given in three levels:
+     *
+     * 1. Options for all series in a chart are defined in the
+     * plotOptions.series object.
+     *
+     * 2. Options for all `tilemap` series are defined in plotOptions.tilemap.
+     *
+     * 3. Options for one single series are given in the series instance array.
+     * (see online documentation for example)
+     *
+     * **TypeScript:**
+     *
+     * - type option should always be set, otherwise a broad set of unsupported
+     * options is allowed.
+     *
+     * - when accessing an array of series, the combined set of all series types
+     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
+     * specific type can be done by checking the `type` property. (see online
+     * documentation for example)
+     *
+     * You have to extend the `SeriesTilemapOptions` via an interface to allow
+     * custom properties: ``` declare interface SeriesTilemapOptions {
+     * customProperty: string; }
+     *
+     */
+    interface SeriesTilemapOptions extends Highcharts.PlotTilemapOptions, Highcharts.SeriesOptions {
+        /**
+         * Not available
+         */
+        allAreas?: undefined;
+        /**
+         * (Highcharts, Highmaps) An array of data points for the series. For
+         * the `tilemap` series type, points can be given in the following ways:
+         *
+         * 1. An array of arrays with 3 or 2 values. In this case, the values
+         * correspond to `x,y,value`. If the first value is a string, it is
+         * applied as the name of the point, and the `x` value is inferred. The
+         * `x` value can also be omitted, in which case the inner arrays should
+         * be of length 2\. Then the `x` value is automatically calculated,
+         * either starting at 0 and incremented by 1, or from `pointStart` and
+         * `pointInterval` given in the series options. (see online
+         * documentation for example)
+         *
+         * 2. An array of objects with named values. The objects are point
+         * configuration objects as seen below. If the total number of data
+         * points exceeds the series' turboThreshold, this option is not
+         * available. (see online documentation for example)
+         *
+         * Note that for some tileShapes the grid coordinates are offset.
+         */
+        data?: Array<([(number|string), number]|[(number|string), number, number]|Highcharts.PointOptionsObject)>;
+        /**
+         * Not available
+         */
+        mapData?: undefined;
+        /**
+         * Not available
+         */
+        stack?: undefined;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) This property is only in
+         * TypeScript non-optional and might be `undefined` in series objects
+         * from unknown sources.
+         */
+        type: "tilemap";
+    }
 }