highcharts 12.0.0 → 12.0.2

package/options/vwap.d.ts

@@ -0,0 +1,159 @@
+/*!*
+ *
+ *  Copyright (c) Highsoft AS. All rights reserved.
+ *
+ *!*/
+import * as Highcharts from "../highcharts";
+declare module "../highcharts" {
+    /**
+     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
+     * animation when a series is displayed for the `dataLabels`. The animation
+     * can also be set as a configuration object. Please note that this option
+     * only applies to the initial animation.
+     *
+     * For other animations, see chart.animation and the animation parameter
+     * under the API methods. The following properties are supported:
+     *
+     * - `defer`: The animation delay time in milliseconds.
+     */
+    interface PlotVwapDataLabelsAnimationOptions {
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
+         * milliseconds. Set to `0` to render the data labels immediately. As
+         * `undefined` inherits defer time from the series.animation.defer.
+         */
+        defer?: number;
+    }
+    /**
+     * (Highcharts, Highstock) Options for the series data sorting.
+     */
+    interface PlotVwapDataSortingOptions {
+        /**
+         * (Highcharts, Highstock) Enable or disable data sorting for the
+         * series. Use xAxis.reversed to change the sorting order.
+         */
+        enabled?: boolean;
+        /**
+         * (Highcharts, Highstock) Whether to allow matching points by name in
+         * an update. If this option is disabled, points will be matched by
+         * order.
+         */
+        matchByName?: boolean;
+        /**
+         * (Highcharts, Highstock) Determines what data value should be used to
+         * sort by.
+         */
+        sortKey?: string;
+    }
+    /**
+     * (Highstock) Options for the connector in the _Series on point_ feature.
+     *
+     * In styled mode, the connector can be styled with the
+     * `.highcharts-connector-seriesonpoint` class name.
+     */
+    interface PlotVwapOnPointConnectorOptions {
+        /**
+         * (Highstock) A name for the dash style to use for the connector.
+         */
+        dashstyle?: string;
+        /**
+         * (Highstock) Color of the connector line. By default it's the series'
+         * color.
+         */
+        stroke?: string;
+        /**
+         * (Highstock) Pixel width of the connector line.
+         */
+        width?: number;
+    }
+    /**
+     * (Highstock) Options allowing to set a position and an offset of the
+     * series in the _Series on point_ feature.
+     */
+    interface PlotVwapOnPointPositionOptions {
+        /**
+         * (Highstock) Series center offset from the original x position. If
+         * defined, the connector line is drawn connecting original position
+         * with new position.
+         */
+        offsetX?: number;
+        /**
+         * (Highstock) Series center offset from the original y position. If
+         * defined, the connector line is drawn from original position to a new
+         * position.
+         */
+        offsetY?: number;
+        /**
+         * (Highstock) X position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
+         */
+        x?: number;
+        /**
+         * (Highstock) Y position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
+         */
+        y?: number;
+    }
+    /**
+     * (Highstock) Parameters used in calculation of regression series' points.
+     */
+    interface PlotVwapParamsOptions {
+        index?: string;
+        /**
+         * (Highstock) The base period for indicator calculations. This is the
+         * number of data points which are taken into account for the indicator
+         * calculations.
+         */
+        period?: number;
+        /**
+         * (Highstock) The id of volume series which is mandatory. For example
+         * using OHLC data, volumeSeriesID='volume' means the indicator will be
+         * calculated using OHLC and volume values.
+         */
+        volumeSeriesID?: string;
+    }
+    /**
+     * (Highstock) A `Volume Weighted Average Price (VWAP)` series. If the type
+     * option is not specified, it is inherited from chart.type.
+     *
+     * Configuration options for the series are given in three levels:
+     *
+     * 1. Options for all series in a chart are defined in the
+     * plotOptions.series object.
+     *
+     * 2. Options for all `vwap` series are defined in plotOptions.vwap.
+     *
+     * 3. Options for one single series are given in the series instance array.
+     * (see online documentation for example)
+     *
+     * **TypeScript:**
+     *
+     * - the type option must always be set.
+     *
+     * - when accessing an array of series, the combined set of all series types
+     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
+     * specific type can be done by checking the `type` property. (see online
+     * documentation for example)
+     *
+     * You have to extend the `SeriesVwapOptions` via an interface to allow
+     * custom properties: ``` declare interface SeriesVwapOptions {
+     * customProperty: string; }
+     *
+     */
+    interface SeriesVwapOptions extends Highcharts.PlotVwapOptions, Highcharts.SeriesOptions {
+        /**
+         * Not available
+         */
+        dataParser?: undefined;
+        /**
+         * Not available
+         */
+        dataURL?: undefined;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) This property is only in
+         * TypeScript non-optional and might be `undefined` in series objects
+         * from unknown sources.
+         */
+        type: "vwap";
+    }
+}

package/options/vwap.src.d.ts

@@ -0,0 +1,159 @@
+/*!*
+ *
+ *  Copyright (c) Highsoft AS. All rights reserved.
+ *
+ *!*/
+import * as Highcharts from "../highcharts.src";
+declare module "../highcharts.src" {
+    /**
+     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
+     * animation when a series is displayed for the `dataLabels`. The animation
+     * can also be set as a configuration object. Please note that this option
+     * only applies to the initial animation.
+     *
+     * For other animations, see chart.animation and the animation parameter
+     * under the API methods. The following properties are supported:
+     *
+     * - `defer`: The animation delay time in milliseconds.
+     */
+    interface PlotVwapDataLabelsAnimationOptions {
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
+         * milliseconds. Set to `0` to render the data labels immediately. As
+         * `undefined` inherits defer time from the series.animation.defer.
+         */
+        defer?: number;
+    }
+    /**
+     * (Highcharts, Highstock) Options for the series data sorting.
+     */
+    interface PlotVwapDataSortingOptions {
+        /**
+         * (Highcharts, Highstock) Enable or disable data sorting for the
+         * series. Use xAxis.reversed to change the sorting order.
+         */
+        enabled?: boolean;
+        /**
+         * (Highcharts, Highstock) Whether to allow matching points by name in
+         * an update. If this option is disabled, points will be matched by
+         * order.
+         */
+        matchByName?: boolean;
+        /**
+         * (Highcharts, Highstock) Determines what data value should be used to
+         * sort by.
+         */
+        sortKey?: string;
+    }
+    /**
+     * (Highstock) Options for the connector in the _Series on point_ feature.
+     *
+     * In styled mode, the connector can be styled with the
+     * `.highcharts-connector-seriesonpoint` class name.
+     */
+    interface PlotVwapOnPointConnectorOptions {
+        /**
+         * (Highstock) A name for the dash style to use for the connector.
+         */
+        dashstyle?: string;
+        /**
+         * (Highstock) Color of the connector line. By default it's the series'
+         * color.
+         */
+        stroke?: string;
+        /**
+         * (Highstock) Pixel width of the connector line.
+         */
+        width?: number;
+    }
+    /**
+     * (Highstock) Options allowing to set a position and an offset of the
+     * series in the _Series on point_ feature.
+     */
+    interface PlotVwapOnPointPositionOptions {
+        /**
+         * (Highstock) Series center offset from the original x position. If
+         * defined, the connector line is drawn connecting original position
+         * with new position.
+         */
+        offsetX?: number;
+        /**
+         * (Highstock) Series center offset from the original y position. If
+         * defined, the connector line is drawn from original position to a new
+         * position.
+         */
+        offsetY?: number;
+        /**
+         * (Highstock) X position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
+         */
+        x?: number;
+        /**
+         * (Highstock) Y position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
+         */
+        y?: number;
+    }
+    /**
+     * (Highstock) Parameters used in calculation of regression series' points.
+     */
+    interface PlotVwapParamsOptions {
+        index?: string;
+        /**
+         * (Highstock) The base period for indicator calculations. This is the
+         * number of data points which are taken into account for the indicator
+         * calculations.
+         */
+        period?: number;
+        /**
+         * (Highstock) The id of volume series which is mandatory. For example
+         * using OHLC data, volumeSeriesID='volume' means the indicator will be
+         * calculated using OHLC and volume values.
+         */
+        volumeSeriesID?: string;
+    }
+    /**
+     * (Highstock) A `Volume Weighted Average Price (VWAP)` series. If the type
+     * option is not specified, it is inherited from chart.type.
+     *
+     * Configuration options for the series are given in three levels:
+     *
+     * 1. Options for all series in a chart are defined in the
+     * plotOptions.series object.
+     *
+     * 2. Options for all `vwap` series are defined in plotOptions.vwap.
+     *
+     * 3. Options for one single series are given in the series instance array.
+     * (see online documentation for example)
+     *
+     * **TypeScript:**
+     *
+     * - the type option must always be set.
+     *
+     * - when accessing an array of series, the combined set of all series types
+     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
+     * specific type can be done by checking the `type` property. (see online
+     * documentation for example)
+     *
+     * You have to extend the `SeriesVwapOptions` via an interface to allow
+     * custom properties: ``` declare interface SeriesVwapOptions {
+     * customProperty: string; }
+     *
+     */
+    interface SeriesVwapOptions extends Highcharts.PlotVwapOptions, Highcharts.SeriesOptions {
+        /**
+         * Not available
+         */
+        dataParser?: undefined;
+        /**
+         * Not available
+         */
+        dataURL?: undefined;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) This property is only in
+         * TypeScript non-optional and might be `undefined` in series objects
+         * from unknown sources.
+         */
+        type: "vwap";
+    }
+}

package/options/waterfall.d.ts

@@ -0,0 +1,164 @@
+/*!*
+ *
+ *  Copyright (c) Highsoft AS. All rights reserved.
+ *
+ *!*/
+import * as Highcharts from "../highcharts";
+declare module "../highcharts" {
+    /**
+     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
+     * animation when a series is displayed for the `dataLabels`. The animation
+     * can also be set as a configuration object. Please note that this option
+     * only applies to the initial animation.
+     *
+     * For other animations, see chart.animation and the animation parameter
+     * under the API methods. The following properties are supported:
+     *
+     * - `defer`: The animation delay time in milliseconds.
+     */
+    interface PlotWaterfallDataLabelsAnimationOptions {
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
+         * milliseconds. Set to `0` to render the data labels immediately. As
+         * `undefined` inherits defer time from the series.animation.defer.
+         */
+        defer?: number;
+    }
+    /**
+     * (Highcharts, Highstock) Options for the series data sorting.
+     */
+    interface PlotWaterfallDataSortingOptions {
+        /**
+         * (Highcharts, Highstock) Enable or disable data sorting for the
+         * series. Use xAxis.reversed to change the sorting order.
+         */
+        enabled?: boolean;
+        /**
+         * (Highcharts, Highstock) Whether to allow matching points by name in
+         * an update. If this option is disabled, points will be matched by
+         * order.
+         */
+        matchByName?: boolean;
+        /**
+         * (Highcharts, Highstock) Determines what data value should be used to
+         * sort by.
+         */
+        sortKey?: string;
+    }
+    /**
+     * (Highcharts) Options for the connector in the _Series on point_ feature.
+     *
+     * In styled mode, the connector can be styled with the
+     * `.highcharts-connector-seriesonpoint` class name.
+     */
+    interface PlotWaterfallOnPointConnectorOptions {
+        /**
+         * (Highcharts) A name for the dash style to use for the connector.
+         */
+        dashstyle?: string;
+        /**
+         * (Highcharts) Color of the connector line. By default it's the series'
+         * color.
+         */
+        stroke?: string;
+        /**
+         * (Highcharts) Pixel width of the connector line.
+         */
+        width?: number;
+    }
+    /**
+     * (Highcharts) Options allowing to set a position and an offset of the
+     * series in the _Series on point_ feature.
+     */
+    interface PlotWaterfallOnPointPositionOptions {
+        /**
+         * (Highcharts) Series center offset from the original x position. If
+         * defined, the connector line is drawn connecting original position
+         * with new position.
+         */
+        offsetX?: number;
+        /**
+         * (Highcharts) Series center offset from the original y position. If
+         * defined, the connector line is drawn from original position to a new
+         * position.
+         */
+        offsetY?: number;
+        /**
+         * (Highcharts) X position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
+         */
+        x?: number;
+        /**
+         * (Highcharts) Y position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
+         */
+        y?: number;
+    }
+    /**
+     * (Highcharts) A `waterfall` series. If the type option is not specified,
+     * it is inherited from chart.type.
+     *
+     * Configuration options for the series are given in three levels:
+     *
+     * 1. Options for all series in a chart are defined in the
+     * plotOptions.series object.
+     *
+     * 2. Options for all `waterfall` series are defined in
+     * plotOptions.waterfall.
+     *
+     * 3. Options for one single series are given in the series instance array.
+     * (see online documentation for example)
+     *
+     * **TypeScript:**
+     *
+     * - the type option must always be set.
+     *
+     * - when accessing an array of series, the combined set of all series types
+     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
+     * specific type can be done by checking the `type` property. (see online
+     * documentation for example)
+     *
+     * You have to extend the `SeriesWaterfallOptions` via an interface to allow
+     * custom properties: ``` declare interface SeriesWaterfallOptions {
+     * customProperty: string; }
+     *
+     */
+    interface SeriesWaterfallOptions extends Highcharts.PlotWaterfallOptions, Highcharts.SeriesOptions {
+        /**
+         * (Highcharts) An array of data points for the series. For the
+         * `waterfall` series type, points can be given in the following ways:
+         *
+         * 1. An array of numerical values. In this case, the numerical values
+         * will be interpreted as `y` options. The `x` values will be
+         * automatically calculated, either starting at 0 and incremented by 1,
+         * or from `pointStart` and `pointInterval` given in the series options.
+         * If the axis has categories, these will be used. Example: (see online
+         * documentation for example)
+         *
+         * 2. An array of arrays with 2 values. In this case, the values
+         * correspond to `x,y`. If the first value is a string, it is applied as
+         * the name of the point, and the `x` value is inferred. (see online
+         * documentation for example)
+         *
+         * 3. An array of objects with named values. The following snippet shows
+         * only a few settings, see the complete options set below. If the total
+         * number of data points exceeds the series' turboThreshold, this option
+         * is not available. (see online documentation for example)
+         */
+        data?: Array<(number|[(number|string), (number|null)]|null|Highcharts.PointOptionsObject)>;
+        /**
+         * Not available
+         */
+        dataParser?: undefined;
+        /**
+         * Not available
+         */
+        dataURL?: undefined;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) This property is only in
+         * TypeScript non-optional and might be `undefined` in series objects
+         * from unknown sources.
+         */
+        type: "waterfall";
+    }
+}

package/options/waterfall.src.d.ts

@@ -0,0 +1,164 @@
+/*!*
+ *
+ *  Copyright (c) Highsoft AS. All rights reserved.
+ *
+ *!*/
+import * as Highcharts from "../highcharts.src";
+declare module "../highcharts.src" {
+    /**
+     * (Highcharts, Highstock, Highmaps, Gantt) Enable or disable the initial
+     * animation when a series is displayed for the `dataLabels`. The animation
+     * can also be set as a configuration object. Please note that this option
+     * only applies to the initial animation.
+     *
+     * For other animations, see chart.animation and the animation parameter
+     * under the API methods. The following properties are supported:
+     *
+     * - `defer`: The animation delay time in milliseconds.
+     */
+    interface PlotWaterfallDataLabelsAnimationOptions {
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) The animation delay time in
+         * milliseconds. Set to `0` to render the data labels immediately. As
+         * `undefined` inherits defer time from the series.animation.defer.
+         */
+        defer?: number;
+    }
+    /**
+     * (Highcharts, Highstock) Options for the series data sorting.
+     */
+    interface PlotWaterfallDataSortingOptions {
+        /**
+         * (Highcharts, Highstock) Enable or disable data sorting for the
+         * series. Use xAxis.reversed to change the sorting order.
+         */
+        enabled?: boolean;
+        /**
+         * (Highcharts, Highstock) Whether to allow matching points by name in
+         * an update. If this option is disabled, points will be matched by
+         * order.
+         */
+        matchByName?: boolean;
+        /**
+         * (Highcharts, Highstock) Determines what data value should be used to
+         * sort by.
+         */
+        sortKey?: string;
+    }
+    /**
+     * (Highcharts) Options for the connector in the _Series on point_ feature.
+     *
+     * In styled mode, the connector can be styled with the
+     * `.highcharts-connector-seriesonpoint` class name.
+     */
+    interface PlotWaterfallOnPointConnectorOptions {
+        /**
+         * (Highcharts) A name for the dash style to use for the connector.
+         */
+        dashstyle?: string;
+        /**
+         * (Highcharts) Color of the connector line. By default it's the series'
+         * color.
+         */
+        stroke?: string;
+        /**
+         * (Highcharts) Pixel width of the connector line.
+         */
+        width?: number;
+    }
+    /**
+     * (Highcharts) Options allowing to set a position and an offset of the
+     * series in the _Series on point_ feature.
+     */
+    interface PlotWaterfallOnPointPositionOptions {
+        /**
+         * (Highcharts) Series center offset from the original x position. If
+         * defined, the connector line is drawn connecting original position
+         * with new position.
+         */
+        offsetX?: number;
+        /**
+         * (Highcharts) Series center offset from the original y position. If
+         * defined, the connector line is drawn from original position to a new
+         * position.
+         */
+        offsetY?: number;
+        /**
+         * (Highcharts) X position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
+         */
+        x?: number;
+        /**
+         * (Highcharts) Y position of the series center. By default, the series
+         * is displayed on the point that it is connected to.
+         */
+        y?: number;
+    }
+    /**
+     * (Highcharts) A `waterfall` series. If the type option is not specified,
+     * it is inherited from chart.type.
+     *
+     * Configuration options for the series are given in three levels:
+     *
+     * 1. Options for all series in a chart are defined in the
+     * plotOptions.series object.
+     *
+     * 2. Options for all `waterfall` series are defined in
+     * plotOptions.waterfall.
+     *
+     * 3. Options for one single series are given in the series instance array.
+     * (see online documentation for example)
+     *
+     * **TypeScript:**
+     *
+     * - the type option must always be set.
+     *
+     * - when accessing an array of series, the combined set of all series types
+     * is represented by Highcharts.SeriesOptionsType . Narrowing down to the
+     * specific type can be done by checking the `type` property. (see online
+     * documentation for example)
+     *
+     * You have to extend the `SeriesWaterfallOptions` via an interface to allow
+     * custom properties: ``` declare interface SeriesWaterfallOptions {
+     * customProperty: string; }
+     *
+     */
+    interface SeriesWaterfallOptions extends Highcharts.PlotWaterfallOptions, Highcharts.SeriesOptions {
+        /**
+         * (Highcharts) An array of data points for the series. For the
+         * `waterfall` series type, points can be given in the following ways:
+         *
+         * 1. An array of numerical values. In this case, the numerical values
+         * will be interpreted as `y` options. The `x` values will be
+         * automatically calculated, either starting at 0 and incremented by 1,
+         * or from `pointStart` and `pointInterval` given in the series options.
+         * If the axis has categories, these will be used. Example: (see online
+         * documentation for example)
+         *
+         * 2. An array of arrays with 2 values. In this case, the values
+         * correspond to `x,y`. If the first value is a string, it is applied as
+         * the name of the point, and the `x` value is inferred. (see online
+         * documentation for example)
+         *
+         * 3. An array of objects with named values. The following snippet shows
+         * only a few settings, see the complete options set below. If the total
+         * number of data points exceeds the series' turboThreshold, this option
+         * is not available. (see online documentation for example)
+         */
+        data?: Array<(number|[(number|string), (number|null)]|null|Highcharts.PointOptionsObject)>;
+        /**
+         * Not available
+         */
+        dataParser?: undefined;
+        /**
+         * Not available
+         */
+        dataURL?: undefined;
+        /**
+         * (Highcharts, Highstock, Highmaps, Gantt) This property is only in
+         * TypeScript non-optional and might be `undefined` in series objects
+         * from unknown sources.
+         */
+        type: "waterfall";
+    }
+}