halfcycle 0.4.8 → 0.4.10

package/commands/agent-teams-orchestration.md

@@ -2,7 +2,7 @@
 description: Take a plan that already exists and drive ALL of it through to done across several workers at once, rather than handing out the pieces one at a time
 ---
 
-Resolve `/agent-teams-orchestration` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step names, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
+Resolve `/agent-teams-orchestration` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step ids. Name a stage by its step's name, the professional's term spelled out, then say plainly what it means and give a short phrase they can say to start it, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
 
 If resolution fails, report exactly this and stop:
 

package/commands/consistency-check.md

@@ -2,7 +2,7 @@
 description: Check a drafted feature spec against the invariants and its adjacent specs, from a session that did not write it
 ---
 
-Resolve `/consistency-check` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step names, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
+Resolve `/consistency-check` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step ids. Name a stage by its step's name, the professional's term spelled out, then say plainly what it means and give a short phrase they can say to start it, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
 
 If resolution fails, report exactly this and stop:
 

package/commands/context-update.md

@@ -2,7 +2,7 @@
 description: Route recent changes into the repo's context surfaces
 ---
 
-Resolve `/context-update` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step names, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
+Resolve `/context-update` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step ids. Name a stage by its step's name, the professional's term spelled out, then say plainly what it means and give a short phrase they can say to start it, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
 
 If resolution fails, report exactly this and stop:
 

package/commands/halfcycle-design.md

@@ -2,7 +2,7 @@
 description: Work out what the product is — the design journey to a PRD and phases
 ---
 
-Resolve `/halfcycle-design` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step names, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
+Resolve `/halfcycle-design` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step ids. Name a stage by its step's name, the professional's term spelled out, then say plainly what it means and give a short phrase they can say to start it, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
 
 If resolution fails, report exactly this and stop:
 

package/commands/halfcycle-setup.md

@@ -2,7 +2,7 @@
 description: Set up a repository for a Halfcycle engagement
 ---
 
-Resolve `/halfcycle-setup` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step names, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
+Resolve `/halfcycle-setup` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step ids. Name a stage by its step's name, the professional's term spelled out, then say plainly what it means and give a short phrase they can say to start it, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
 
 If resolution fails, report whichever applies and stop:
 

package/commands/stack-assembly-worker.md

@@ -2,7 +2,7 @@
 description: Verify a phase's assembled stack comes up end to end
 ---
 
-Resolve `/stack-assembly-worker` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step names, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
+Resolve `/stack-assembly-worker` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step ids. Name a stage by its step's name, the professional's term spelled out, then say plainly what it means and give a short phrase they can say to start it, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
 
 If resolution fails, report exactly this and stop:
 

package/commands/task-execution.md

@@ -2,7 +2,7 @@
 description: Do ONE piece of the planned work, on its own — not the whole plan
 ---
 
-Resolve `/task-execution` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step names, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
+Resolve `/task-execution` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step ids. Name a stage by its step's name, the professional's term spelled out, then say plainly what it means and give a short phrase they can say to start it, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
 
 If resolution fails, report exactly this and stop:
 

package/commands/task-graph.md

@@ -2,7 +2,7 @@
 description: Break the next chunk of work into ordered pieces that can be handed out — what has to happen before what, and who could take each
 ---
 
-Resolve `/task-graph` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step names, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
+Resolve `/task-graph` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step ids. Name a stage by its step's name, the professional's term spelled out, then say plainly what it means and give a short phrase they can say to start it, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
 
 If resolution fails, report exactly this and stop:
 

package/commands/write-spec.md

@@ -2,7 +2,7 @@
 description: Draft a Layer 4 feature spec
 ---
 
-Resolve `/write-spec` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step names, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
+Resolve `/write-spec` for this engagement's current state, execute what comes back, report that the step ran, and resolve again — repeating until the response says there is nothing left (`hasNextStep` false); pausing for a human answer is not the end of the run. Do not improvise the procedure. Say where things stand at the boundaries of the run — when it starts, when it moves to a new layer, and when it ends — rather than on every turn, and pause only where a step asks you to. At one of those boundaries, and at most once per run, point them at this project's own page on the web and say what is there: how the project is going, the agents working on it once there are any, and their other projects alongside it. Use the address this install already records for the project's page rather than building one from an example, and give them the address itself — a page they are told about but cannot reach is worse than not mentioning it. Some steps of the Halfcycle method are judged by Halfcycle rather than by this session, or need a person to do something outside this session, so a quiet run is not a claim that nothing was due — say so when a run ends. Everything you say to the person is in plain words. Name the Halfcycle method the first time and say what it is in the same breath — the process that will guide the two of you through building this — because bare "the method" means nothing to someone who has not met it. After that, talk about their product and never about how any of this works underneath: no paths or files of ours, no hooks, settings, commands, layers or step ids. Name a stage by its step's name, the professional's term spelled out, then say plainly what it means and give a short phrase they can say to start it, and never Halfcycle's own machinery as the subject of a sentence. Say what now exists, what it is for, and what you need from them, in their terms. The one thing you never soften and never leave out is what did NOT happen — say that plainly too. If you are asked to jump ahead: when that is what comes next anyway, just do it; when Halfcycle refuses, relay its reason word for word and invent no procedure of your own; when it can be served but skips something, do it and say what is being skipped and what that costs. Coming back later is fine — a fresh session re-orients from what this project has recorded, so ask to carry on in plain words and you get the right next step and where things stand.
 
 If resolution fails, report exactly this and stop:
 

package/dist/bin.d.ts

@@ -10,10 +10,11 @@
  *   halfcycle check-drift <target>           — report bundle drift for the re-sync gate
  *   halfcycle build-record <phase>           — fetch a closed phase's Build Record and write it
  *   halfcycle open-phase <phase>             — open a phase, with its entry decision
- *   halfcycle close-phase <phase>            — record a phase's acceptance and close it
+ *   halfcycle close-phase <phase>            — open the owner's review of a phase
  *   halfcycle system                         — check docs/system.json and report it (`system-report.ts`)
  *   halfcycle draw architecture|phase <phase> — draw the architecture or a phase's pictures into docs/diagrams (`draw/`)
  *   halfcycle plan <phase> [--show]          — check a phase's plan and report it; list it (`plan.ts`)
+ *   halfcycle review <phase> --show | --answer <part> "…" — list a phase's close review; answer a question (`review.ts`)
  *   halfcycle uninstall [--remove-credential] — take back what the installer wrote here
  *
  * NO `ci` VERB (T-25, operator decision 2026-09-22(c)) — `ci bind`/`ci unbind`

package/dist/bin.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"bin.d.ts","sourceRoot":"","sources":["../src/bin.ts"],"names":[],"mappings":";AACA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAyCG"}
+{"version":3,"file":"bin.d.ts","sourceRoot":"","sources":["../src/bin.ts"],"names":[],"mappings":";AACA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA0CG"}

package/dist/build-record/obtain.d.ts

@@ -1,7 +1,7 @@
 /**
  * Fetch a closed phase's Build Record from the Halfcycle service and write the pair
- * into the client's repository — the one path both `close-phase` (after a close)
- * and `build-record <phase>` (the re-fetch) take, so the two cannot drift.
+ * into the client's repository — the path `build-record <phase>` takes, once the
+ * owner's last review decision has closed the phase, and again for a re-fetch.
  *
  * ONE RESPONSE-HANDLING RULE. A body that parses under `phaseRecordResponseSchema`
  * is authoritative, whatever its status. Otherwise a 404 whose body is the
@@ -27,7 +27,7 @@
  * sentence, and no comment sits beside an object member.
  */
 import { type PhaseRecordRefusalReason } from '@halfcycle/events';
-import type { RepoCredential } from '../open-phase.js';
+import { type PhaseStampFailure, type RepoCredential } from '../open-phase.js';
 import { type RecordPairIo } from './write.js';
 /**
  * What came of asking for a phase's record. `written`: the pair is on disk (paths
@@ -35,12 +35,15 @@ import { type RecordPairIo } from './write.js';
  * way; nothing was written. `withheld` and `refused`: the service's answer, with its
  * own sentence. `unavailable`: the record could not be obtained, and `why` says so.
  * `headline` is the latest close's headline as the .md states it, in plain words.
+ * `stampFailure` is set when the record written is the phase this machine's stamp
+ * names and the stamp could not be cleared (`clearStampFor`); `null` otherwise.
  */
 export type ObtainOutcome = {
     kind: 'written';
     jsonPath: string;
     mdPath: string;
     headline: string;
+    stampFailure: PhaseStampFailure | null;
 } | {
     kind: 'exists';
     path: string;
@@ -74,11 +77,15 @@ export declare const REFUSAL_REASONS: readonly PhaseRecordRefusalReason[];
 export declare function buildRecordUrl(credential: RepoCredential, phase: string): string;
 /**
  * Ask the service for `phase`'s frozen record and, when it serves one, write the
- * pair under `repoRoot`. Never throws: every way this can fail — the network, the
- * service, a write — is an outcome the caller prints, because by the time this
- * runs after a close the phase has already closed.
+ * pair under `repoRoot`, then clear this machine's phase stamp when it names `phase`.
+ * Never throws: every way this can fail — the network, the service, a write — is an
+ * outcome the caller prints.
+ *
+ * @param home the home folder the machine-level credential store is under; the
+ *             user's own when absent. A parameter so a test never reaches into the
+ *             real one.
  */
-export declare function obtainBuildRecord(credential: RepoCredential, repoRoot: string, phase: string, io?: RecordPairIo): Promise<ObtainOutcome>;
+export declare function obtainBuildRecord(credential: RepoCredential, repoRoot: string, phase: string, io?: RecordPairIo, home?: string): Promise<ObtainOutcome>;
 /**
  * How to fetch a phase's record later, as a line a person can paste: the phase
  * is quoted for the shell, through the one home every package that prints a

package/dist/build-record/obtain.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"obtain.d.ts","sourceRoot":"","sources":["../../src/build-record/obtain.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;GA2BG;AAGH,OAAO,EAGL,KAAK,wBAAwB,EAC9B,MAAM,mBAAmB,CAAC;AAE3B,OAAO,KAAK,EAAE,cAAc,EAAE,MAAM,kBAAkB,CAAC;AACvD,OAAO,EAAwC,KAAK,YAAY,EAAE,MAAM,YAAY,CAAC;AAIrF;;;;;;GAMG;AACH,MAAM,MAAM,aAAa,GACrB;IAAE,IAAI,EAAE,SAAS,CAAC;IAAC,QAAQ,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAC;IAAC,QAAQ,EAAE,MAAM,CAAA;CAAE,GACvE;IAAE,IAAI,EAAE,QAAQ,CAAC;IAAC,IAAI,EAAE,MAAM,CAAA;CAAE,GAChC;IAAE,IAAI,EAAE,UAAU,CAAC;IAAC,OAAO,EAAE,MAAM,CAAA;CAAE,GACrC;IAAE,IAAI,EAAE,SAAS,CAAC;IAAC,MAAM,EAAE,wBAAwB,CAAC;IAAC,OAAO,EAAE,MAAM,CAAA;CAAE,GACtE;IAAE,IAAI,EAAE,aAAa,CAAC;IAAC,GAAG,EAAE,MAAM,CAAA;CAAE,CAAC;AAEzC;;;;;GAKG;AACH,eAAO,MAAM,iBAAiB;;;;;;CAM+B,CAAC;AAE9D,8EAA8E;AAC9E,eAAO,MAAM,eAAe,EAAE,SAAS,wBAAwB,EAA2C,CAAC;AAE3G,oFAAoF;AACpF,wBAAgB,cAAc,CAAC,UAAU,EAAE,cAAc,EAAE,KAAK,EAAE,MAAM,GAAG,MAAM,CAKhF;AAED;;;;;GAKG;AACH,wBAAsB,iBAAiB,CACrC,UAAU,EAAE,cAAc,EAC1B,QAAQ,EAAE,MAAM,EAChB,KAAK,EAAE,MAAM,EACb,EAAE,GAAE,YAAkC,GACrC,OAAO,CAAC,aAAa,CAAC,CA2ExB;AAED;;;;;GAKG;AACH,wBAAgB,cAAc,CAAC,KAAK,EAAE,MAAM,GAAG,MAAM,CAEpD"}
+{"version":3,"file":"obtain.d.ts","sourceRoot":"","sources":["../../src/build-record/obtain.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;GA2BG;AAGH,OAAO,EAGL,KAAK,wBAAwB,EAC9B,MAAM,mBAAmB,CAAC;AAE3B,OAAO,EAAmB,KAAK,iBAAiB,EAAE,KAAK,cAAc,EAAE,MAAM,kBAAkB,CAAC;AAEhG,OAAO,EAAwC,KAAK,YAAY,EAAE,MAAM,YAAY,CAAC;AAIrF;;;;;;;;GAQG;AACH,MAAM,MAAM,aAAa,GACrB;IAAE,IAAI,EAAE,SAAS,CAAC;IAAC,QAAQ,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAC;IAAC,QAAQ,EAAE,MAAM,CAAC;IAAC,YAAY,EAAE,iBAAiB,GAAG,IAAI,CAAA;CAAE,GAC/G;IAAE,IAAI,EAAE,QAAQ,CAAC;IAAC,IAAI,EAAE,MAAM,CAAA;CAAE,GAChC;IAAE,IAAI,EAAE,UAAU,CAAC;IAAC,OAAO,EAAE,MAAM,CAAA;CAAE,GACrC;IAAE,IAAI,EAAE,SAAS,CAAC;IAAC,MAAM,EAAE,wBAAwB,CAAC;IAAC,OAAO,EAAE,MAAM,CAAA;CAAE,GACtE;IAAE,IAAI,EAAE,aAAa,CAAC;IAAC,GAAG,EAAE,MAAM,CAAA;CAAE,CAAC;AAEzC;;;;;GAKG;AACH,eAAO,MAAM,iBAAiB;;;;;;CAM+B,CAAC;AAE9D,8EAA8E;AAC9E,eAAO,MAAM,eAAe,EAAE,SAAS,wBAAwB,EAA2C,CAAC;AAE3G,oFAAoF;AACpF,wBAAgB,cAAc,CAAC,UAAU,EAAE,cAAc,EAAE,KAAK,EAAE,MAAM,GAAG,MAAM,CAKhF;AAoBD;;;;;;;;;GASG;AACH,wBAAsB,iBAAiB,CACrC,UAAU,EAAE,cAAc,EAC1B,QAAQ,EAAE,MAAM,EAChB,KAAK,EAAE,MAAM,EACb,EAAE,GAAE,YAAkC,EACtC,IAAI,CAAC,EAAE,MAAM,GACZ,OAAO,CAAC,aAAa,CAAC,CA4ExB;AAED;;;;;GAKG;AACH,wBAAgB,cAAc,CAAC,KAAK,EAAE,MAAM,GAAG,MAAM,CAEpD"}

package/dist/build-record/render-v2.d.ts

@@ -16,8 +16,11 @@
  * bytes, whatever key order a database hands back.
  *
  * IT DOES NOT PARSE. The caller parses the record first; the type here is the
- * contract's own inferred type, imported as a type so nothing of the contract
- * module is pulled into this file at runtime. The one cross-half rule it relies
+ * contract's own inferred type. Two of the contract's functions are imported at
+ * runtime, because each is the one home of what it composes: `codeLinkLine`, the
+ * code line every reader prints for a part, and `removalsOf`, the parts a closed
+ * review leaves to take out of the system description. Neither is restated here.
+ * The one cross-half rule it relies
  * on — both halves describe the same closes, paired by `sequence` — it checks
  * itself and throws on, because printing a close without its other half would
  * put a blank where a statement belongs.
@@ -27,7 +30,7 @@
  * vocabulary; the tests scan the emitted markdown, not this source. No comment
  * here sits beside an object member, because the bundler keeps those verbatim.
  */
-import type { BuildRecordV2 } from '@halfcycle/events';
+import { type BuildRecord } from '@halfcycle/events';
 /**
  * Print one string from the record as inert, visible markdown text.
  *
@@ -38,6 +41,27 @@ import type { BuildRecordV2 } from '@halfcycle/events';
  * so a slot is never silently empty.
  */
 export declare function printRecordText(text: string): string;
+/**
+ * Print one string from the record for a line that holds MORE THAN ONE slot.
+ *
+ * `printRecordText` decides what to escape by looking within its one slot, which is
+ * sound only when the slot has a paragraph of its own. Where two slots share a line
+ * (a part's name and its reason, or several names in one sentence), a lone marker in
+ * one could pair with a lone marker in the other and turn the fixed words between
+ * them into markup. So a slot printed here escapes every markup character outright,
+ * and the other slot on the line, printed by `printRecordText`, then has nothing to
+ * pair with. Hidden characters print as their code, as there.
+ */
+export declare function printStrictText(text: string): string;
+/**
+ * Print one string from the record that OPENS a list item's text, as RM2's part name
+ * does (`- <name> — …`): `printStrictText`, and then the start made inert too. A name
+ * opening with `-` or `+`, or with digits and `.` or `)`, would otherwise start a list
+ * nested inside the item, and leading spaces could make it a code block; `#` and `>`
+ * are already escaped by `printStrictText`. The first leading space prints as its
+ * character reference, which a viewer shows as a space.
+ */
+export declare function printItemStartText(text: string): string;
 /**
  * The latest close's headline in plain words — the same title and sentence the .md
  * opens that close with, without the bold. The CLI prints it after a close (cp4f
@@ -45,12 +69,14 @@ export declare function printRecordText(text: string): string;
  * how the phase closed: the terminal said "closed as clean" beside a record that
  * said "this is not a clean result".
  */
-export declare function latestCloseHeadline(record: BuildRecordV2): string;
+export declare function latestCloseHeadline(record: BuildRecord): string;
 /**
- * Render a parsed v2 Build Record as markdown.
+ * Render a parsed Build Record as markdown: v2's observed and attested halves, which
+ * a v3 record carries unchanged, and for a v3 record the owner's review after the
+ * latest close (RM1–RM3, feature `close-review-and-carry-drop`).
  *
  * Throws, in client words, if the two halves describe different closes — which a
  * parsed record cannot do. Output uses `\n` only and ends in exactly one `\n`.
  */
-export declare function renderBuildRecordV2Markdown(record: BuildRecordV2): string;
+export declare function renderBuildRecordV2Markdown(record: BuildRecord): string;
 //# sourceMappingURL=render-v2.d.ts.map

package/dist/build-record/render-v2.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"render-v2.d.ts","sourceRoot":"","sources":["../../src/build-record/render-v2.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA4BG;AAEH,OAAO,KAAK,EAAE,aAAa,EAAE,MAAM,mBAAmB,CAAC;AA4JvD;;;;;;;;GAQG;AACH,wBAAgB,eAAe,CAAC,IAAI,EAAE,MAAM,GAAG,MAAM,CAepD;AAsLD;;;;;;GAMG;AACH,wBAAgB,mBAAmB,CAAC,MAAM,EAAE,aAAa,GAAG,MAAM,CAOjE;AA+JD;;;;;GAKG;AACH,wBAAgB,2BAA2B,CAAC,MAAM,EAAE,aAAa,GAAG,MAAM,CA2DzE"}
+{"version":3,"file":"render-v2.d.ts","sourceRoot":"","sources":["../../src/build-record/render-v2.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA+BG;AAEH,OAAO,EAA4B,KAAK,WAAW,EAA0C,MAAM,mBAAmB,CAAC;AA8JvH;;;;;;;;GAQG;AACH,wBAAgB,eAAe,CAAC,IAAI,EAAE,MAAM,GAAG,MAAM,CAepD;AAKD;;;;;;;;;;GAUG;AACH,wBAAgB,eAAe,CAAC,IAAI,EAAE,MAAM,GAAG,MAAM,CASpD;AAED;;;;;;;GAOG;AACH,wBAAgB,kBAAkB,CAAC,IAAI,EAAE,MAAM,GAAG,MAAM,CAOvD;AAgMD;;;;;;GAMG;AACH,wBAAgB,mBAAmB,CAAC,MAAM,EAAE,WAAW,GAAG,MAAM,CAO/D;AAmOD;;;;;;;GAOG;AACH,wBAAgB,2BAA2B,CAAC,MAAM,EAAE,WAAW,GAAG,MAAM,CA4DvE"}

package/dist/build-record/write.d.ts

@@ -25,7 +25,7 @@
  * before the `mkdirSync` and the first create, so a refused record leaves no file
  * and no empty directory behind.
  */
-import { type BuildRecordV2 } from '@halfcycle/events';
+import { type BuildRecord } from '@halfcycle/events';
 /** The one and only output directory (relative to the target repo root). */
 export declare const BUILD_RECORD_DIR: string;
 /**
@@ -100,5 +100,5 @@ export declare function serialiseServedRecord(rawRecord: unknown): string;
  * @throws InvalidPhaseIdentityError when `phase` cannot name a file.
  * @throws the file system's own error when a write fails; nothing is left behind.
  */
-export declare function writeRecordPair(repoRoot: string, phase: string, rawRecord: unknown, record: BuildRecordV2, io?: RecordPairIo): RecordPairResult;
+export declare function writeRecordPair(repoRoot: string, phase: string, rawRecord: unknown, record: BuildRecord, io?: RecordPairIo): RecordPairResult;
 //# sourceMappingURL=write.d.ts.map

package/dist/build-record/write.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"write.d.ts","sourceRoot":"","sources":["../../src/build-record/write.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;GA0BG;AAcH,OAAO,EAKL,KAAK,aAAa,EACnB,MAAM,mBAAmB,CAAC;AAE3B,4EAA4E;AAC5E,eAAO,MAAM,gBAAgB,QAAgC,CAAC;AAE9D;;;;;;;;;;;;GAYG;AACH,wBAAgB,kBAAkB,CAAC,MAAM,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,EAAE,QAAQ,EAAE,OAAO,GAAG,IAAI,CAM7F;AAED;;;;;;;;;GASG;AACH,MAAM,WAAW,YAAY;IAC3B,eAAe,CAAC,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE,MAAM,GAAG,UAAU,GAAG,IAAI,CAAC;IAC/D,MAAM,CAAC,IAAI,EAAE,MAAM,EAAE,EAAE,EAAE,MAAM,GAAG,IAAI,CAAC;CACxC;AA2BD,eAAO,MAAM,mBAAmB,EAAE,YAGjC,CAAC;AAEF;;;;;;GAMG;AACH,MAAM,MAAM,gBAAgB,GACxB;IAAE,IAAI,EAAE,SAAS,GAAG,YAAY,GAAG,UAAU,CAAC;IAAC,QAAQ,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAA;CAAE,GACjF;IAAE,IAAI,EAAE,YAAY,CAAC;IAAC,IAAI,EAAE,MAAM,CAAA;CAAE,CAAC;AAEzC,mFAAmF;AACnF,wBAAgB,qBAAqB,CAAC,SAAS,EAAE,OAAO,GAAG,MAAM,CAEhE;AA0CD;;;;;;;;;;;;;;;;;;;;;;;;;GAyBG;AACH,wBAAgB,eAAe,CAC7B,QAAQ,EAAE,MAAM,EAChB,KAAK,EAAE,MAAM,EACb,SAAS,EAAE,OAAO,EAClB,MAAM,EAAE,aAAa,EACrB,EAAE,GAAE,YAAkC,GACrC,gBAAgB,CAyDlB"}
+{"version":3,"file":"write.d.ts","sourceRoot":"","sources":["../../src/build-record/write.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;GA0BG;AAcH,OAAO,EAKL,KAAK,WAAW,EACjB,MAAM,mBAAmB,CAAC;AAE3B,4EAA4E;AAC5E,eAAO,MAAM,gBAAgB,QAAgC,CAAC;AAE9D;;;;;;;;;;;;GAYG;AACH,wBAAgB,kBAAkB,CAAC,MAAM,EAAE,MAAM,EAAE,SAAS,EAAE,MAAM,EAAE,QAAQ,EAAE,OAAO,GAAG,IAAI,CAM7F;AAED;;;;;;;;;GASG;AACH,MAAM,WAAW,YAAY;IAC3B,eAAe,CAAC,IAAI,EAAE,MAAM,EAAE,IAAI,EAAE,MAAM,GAAG,UAAU,GAAG,IAAI,CAAC;IAC/D,MAAM,CAAC,IAAI,EAAE,MAAM,EAAE,EAAE,EAAE,MAAM,GAAG,IAAI,CAAC;CACxC;AA2BD,eAAO,MAAM,mBAAmB,EAAE,YAGjC,CAAC;AAEF;;;;;;GAMG;AACH,MAAM,MAAM,gBAAgB,GACxB;IAAE,IAAI,EAAE,SAAS,GAAG,YAAY,GAAG,UAAU,CAAC;IAAC,QAAQ,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAA;CAAE,GACjF;IAAE,IAAI,EAAE,YAAY,CAAC;IAAC,IAAI,EAAE,MAAM,CAAA;CAAE,CAAC;AAEzC,mFAAmF;AACnF,wBAAgB,qBAAqB,CAAC,SAAS,EAAE,OAAO,GAAG,MAAM,CAEhE;AA0CD;;;;;;;;;;;;;;;;;;;;;;;;;GAyBG;AACH,wBAAgB,eAAe,CAC7B,QAAQ,EAAE,MAAM,EAChB,KAAK,EAAE,MAAM,EACb,SAAS,EAAE,OAAO,EAClB,MAAM,EAAE,WAAW,EACnB,EAAE,GAAE,YAAkC,GACrC,gBAAgB,CAyDlB"}

package/dist/cli-contract.d.ts

@@ -25,7 +25,7 @@
  * requirement stops living in `bin.ts`'s argument handling as a sequence of ad-hoc
  * `if (!flag)` checks that nothing else can read. Here it is DATA: the verb, the
  * flags an invocation must carry, the refusal each missing flag prints, and the
- * conditional requirements (`--override` obliges `--reason`). `bin.ts` enforces
+ * conditional requirements (`open-phase`'s `--override` obliges `--reason`). `bin.ts` enforces
  * from this table — it does not restate it — so the argument handling and the
  * declaration cannot disagree. Adding a required flag is one edit here, and every
  * reader of this table follows it.
@@ -62,7 +62,7 @@
  * home is the failure mode it exists to prevent.
  */
 /** The verbs the CLI dispatches. Anything else after `halfcycle ` is unknown. */
-export declare const CLI_VERBS: readonly ["install", "check-drift", "build-record", "open-phase", "close-phase", "system", "draw", "plan", "uninstall"];
+export declare const CLI_VERBS: readonly ["install", "check-drift", "build-record", "open-phase", "close-phase", "system", "draw", "plan", "review", "uninstall"];
 export type CliVerb = (typeof CLI_VERBS)[number];
 /** A flag every invocation of the verb must carry. */
 export interface RequiredFlag {
@@ -143,14 +143,7 @@ export declare function runnableInvocation(verb: CliVerb, phase: string): string
  */
 export declare const REASON_PLACEHOLDER: {
     readonly 'open-phase': "<why you are opening it anyway>";
-    readonly 'close-phase': "<why you are closing over this>";
 };
-/**
- * The override remedy a refused close prints: the close the developer asked for,
- * every value they typed quoted for the shell, plus `--override` and a reason
- * still to be written.
- */
-export declare function closeOverrideInvocation(phase: string, verdict: string, actor: string): string;
 /**
  * The refusal for the first recorded flag whose value is still a placeholder, or
  * `null`. Checked before anything is sent: the value would otherwise be recorded

package/dist/cli-contract.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"cli-contract.d.ts","sourceRoot":"","sources":["../src/cli-contract.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA8DG;AAIH,iFAAiF;AACjF,eAAO,MAAM,SAAS,yHAA0H,CAAC;AAEjJ,MAAM,MAAM,OAAO,GAAG,CAAC,OAAO,SAAS,CAAC,CAAC,MAAM,CAAC,CAAC;AAEjD,sDAAsD;AACtD,MAAM,WAAW,YAAY;IAC3B,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB;;;;OAIG;IACH,QAAQ,CAAC,OAAO,CAAC,EAAE,SAAS,MAAM,EAAE,CAAC;IACrC,2DAA2D;IAC3D,QAAQ,CAAC,UAAU,EAAE,OAAO,CAAC;IAC7B,+EAA+E;IAC/E,QAAQ,CAAC,cAAc,EAAE,MAAM,CAAC;CACjC;AAED,iDAAiD;AACjD,MAAM,WAAW,eAAe;IAC9B,QAAQ,CAAC,WAAW,EAAE,MAAM,CAAC;IAC7B,QAAQ,CAAC,YAAY,EAAE,MAAM,CAAC;IAC9B,QAAQ,CAAC,UAAU,EAAE,OAAO,CAAC;IAC7B,QAAQ,CAAC,cAAc,EAAE,MAAM,CAAC;CACjC;AAED,MAAM,WAAW,YAAY;IAC3B,QAAQ,CAAC,IAAI,EAAE,OAAO,CAAC;IACvB,QAAQ,CAAC,QAAQ,EAAE,SAAS,YAAY,EAAE,CAAC;IAC3C,QAAQ,CAAC,WAAW,EAAE,SAAS,eAAe,EAAE,CAAC;CAClD;AA0FD,6EAA6E;AAC7E,wBAAgB,WAAW,CAAC,IAAI,EAAE,MAAM,GAAG,YAAY,GAAG,SAAS,CAElE;AAED,iDAAiD;AACjD,MAAM,WAAW,SAAS;IACxB,kEAAkE;IAClE,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,oCAAoC;IACpC,QAAQ,CAAC,OAAO,EAAE,MAAM,CAAC;CAC1B;AAmBD;;;;;;;;;;;GAWG;AACH,wBAAgB,mBAAmB,CAAC,IAAI,EAAE,MAAM,EAAE,MAAM,EAAE,SAAS,MAAM,EAAE,GAAG,SAAS,EAAE,CAyBxF;AAED;;;;GAIG;AACH,wBAAgB,kBAAkB,CAAC,IAAI,EAAE,OAAO,EAAE,IAAI,EAAE,MAAM,GAAG,MAAM,CAMtE;AAED;;;;;;;;;;;;;;;;GAgBG;AACH,wBAAgB,kBAAkB,CAAC,IAAI,EAAE,OAAO,EAAE,KAAK,EAAE,MAAM,GAAG,MAAM,CAMvE;AASD;;;;GAIG;AACH,eAAO,MAAM,kBAAkB;;;CAGrB,CAAC;AAEX;;;;GAIG;AACH,wBAAgB,uBAAuB,CAAC,KAAK,EAAE,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,KAAK,EAAE,MAAM,GAAG,MAAM,CAK7F;AAmBD;;;;GAIG;AACH,wBAAgB,kBAAkB,CAAC,IAAI,EAAE,OAAO,EAAE,MAAM,EAAE,SAAS,MAAM,EAAE,GAAG,MAAM,GAAG,IAAI,CAa1F"}
+{"version":3,"file":"cli-contract.d.ts","sourceRoot":"","sources":["../src/cli-contract.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA8DG;AAIH,iFAAiF;AACjF,eAAO,MAAM,SAAS,mIAAoI,CAAC;AAE3J,MAAM,MAAM,OAAO,GAAG,CAAC,OAAO,SAAS,CAAC,CAAC,MAAM,CAAC,CAAC;AAEjD,sDAAsD;AACtD,MAAM,WAAW,YAAY;IAC3B,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB;;;;OAIG;IACH,QAAQ,CAAC,OAAO,CAAC,EAAE,SAAS,MAAM,EAAE,CAAC;IACrC,2DAA2D;IAC3D,QAAQ,CAAC,UAAU,EAAE,OAAO,CAAC;IAC7B,+EAA+E;IAC/E,QAAQ,CAAC,cAAc,EAAE,MAAM,CAAC;CACjC;AAED,iDAAiD;AACjD,MAAM,WAAW,eAAe;IAC9B,QAAQ,CAAC,WAAW,EAAE,MAAM,CAAC;IAC7B,QAAQ,CAAC,YAAY,EAAE,MAAM,CAAC;IAC9B,QAAQ,CAAC,UAAU,EAAE,OAAO,CAAC;IAC7B,QAAQ,CAAC,cAAc,EAAE,MAAM,CAAC;CACjC;AAED,MAAM,WAAW,YAAY;IAC3B,QAAQ,CAAC,IAAI,EAAE,OAAO,CAAC;IACvB,QAAQ,CAAC,QAAQ,EAAE,SAAS,YAAY,EAAE,CAAC;IAC3C,QAAQ,CAAC,WAAW,EAAE,SAAS,eAAe,EAAE,CAAC;CAClD;AAiFD,6EAA6E;AAC7E,wBAAgB,WAAW,CAAC,IAAI,EAAE,MAAM,GAAG,YAAY,GAAG,SAAS,CAElE;AAED,iDAAiD;AACjD,MAAM,WAAW,SAAS;IACxB,kEAAkE;IAClE,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC;IACtB,oCAAoC;IACpC,QAAQ,CAAC,OAAO,EAAE,MAAM,CAAC;CAC1B;AAmBD;;;;;;;;;;;GAWG;AACH,wBAAgB,mBAAmB,CAAC,IAAI,EAAE,MAAM,EAAE,MAAM,EAAE,SAAS,MAAM,EAAE,GAAG,SAAS,EAAE,CAyBxF;AAED;;;;GAIG;AACH,wBAAgB,kBAAkB,CAAC,IAAI,EAAE,OAAO,EAAE,IAAI,EAAE,MAAM,GAAG,MAAM,CAMtE;AAED;;;;;;;;;;;;;;;;GAgBG;AACH,wBAAgB,kBAAkB,CAAC,IAAI,EAAE,OAAO,EAAE,KAAK,EAAE,MAAM,GAAG,MAAM,CAMvE;AASD;;;;GAIG;AACH,eAAO,MAAM,kBAAkB;;CAErB,CAAC;AAmBX;;;;GAIG;AACH,wBAAgB,kBAAkB,CAAC,IAAI,EAAE,OAAO,EAAE,MAAM,EAAE,SAAS,MAAM,EAAE,GAAG,MAAM,GAAG,IAAI,CAa1F"}