gutterpress 0.11.22-alpha.1 → 0.11.22-alpha.2

package/dist/lib/pdf-inspect.d.ts

@@ -122,6 +122,18 @@ export interface ImageRef {
      */
     x: number;
     y: number;
+    /**
+     * The drawn rect in points, y up from the sheet's bottom: the unit square
+     * under the CTM as its axis-aligned bounds, so it holds for an image drawn
+     * flipped or rotated where `x`/`y`/`placedW`/`placedH` do not. The
+     * `pdf.print.safe-margins` check judges it against the art rule.
+     */
+    bounds: {
+        x: number;
+        y: number;
+        w: number;
+        h: number;
+    };
     /** 1-based page number. */
     page: number;
 }

package/dist/lib/project-scaffold.d.ts

@@ -64,9 +64,9 @@ export interface CreateProjectOptions {
     /**
      * Page geometry written into the generated manifest (points; 72pt = 1in).
      * REQUIRED when `preset` is `"custom"` (it has no built-in trim); allowed
-     * with any preset to override its trim. These are the validation bounds
-     * the built PDF is checked against — the actual trim comes from the
-     * stylesheet's `@page` rule, and the two should match.
+     * with any preset to override its trim. This is the size the book prints
+     * at, unless a stylesheet sets its own plain `@page { size }` (#415), and
+     * the size the built PDF is checked against — so the two should match.
      */
     customPage?: CustomPageOptions;
     /** Version-history mode for the new project. Defaults to `"local-git"`. */

package/dist/{manifest.schema-n292sb77.json → manifest.schema-nvawq0xv.json}

@@ -234,13 +234,13 @@
         },
         "artSafe": {
           "type": "number",
-          "description": "The ART rule, in points: how far inside the trim art that does not bleed (images, backgrounds, borders, rules) must stay on the top, bottom and OUTER edge; at the binding edge art uses `gutter`. For DriveThruRPG it is the \"non-bleeding art at least 0.25in from the outside edges (0.5in at the binding)\" rule. Art that runs out to the page's edge is a bleed and is not judged on that edge. The preview's overlay outlines it (dotted) and flags art outside it, and an image pinned to the top, bottom or outer edge (`.gp-pin`) sits on it unless it carries `.gp-flush`. Absent = the same as `safe`. Preset default: dtrpg 18 (0.25in); book and custom none.",
+          "description": "The ART rule, in points: how far inside the trim art that does not bleed (images, backgrounds, borders, rules) must stay on the top, bottom and OUTER edge; at the binding edge art uses `gutter`. For DriveThruRPG it is the \"non-bleeding art at least 0.25in from the outside edges (0.5in at the binding)\" rule. Art that runs out to the page's edge is a bleed and is not judged on that edge. The preview's overlay outlines it (dotted) and flags art outside it, the `pdf.print.safe-margins` check fails a PDF with an image closer (or one that stops in the bleed band), and an image pinned to the top, bottom or outer edge (`.gp-pin`) sits on it unless it carries `.gp-flush`. Absent = the same as `safe`. Preset default: dtrpg 18 (0.25in); book and custom none.",
           "minimum": 0,
           "examples": [18]
         },
         "gutter": {
           "type": "number",
-          "description": "The binding allowance, in points: how far content stays from the spine, measured from the trim at the binding edge (the left edge of a right-hand page, the right edge of a left-hand one). It stands in for `safe` there, for text and for art alike: the preview's overlay draws and judges that edge against it, the `pdf.print.safe-margins` check fails text closer to the spine than it, and an image pinned to the binding edge (`.gp-pin`) sits on it. The other edges keep `safe` and `artSafe`. Use it when your book keeps its text further from the spine than the printer's minimum: the Field Guide keeps 0.75in (54) where DriveThruRPG asks for 0.5in. Absent = the same as `safe`. Presets leave it unset.",
+          "description": "The binding allowance, in points: how far content stays from the spine, measured from the trim at the binding edge (the left edge of a right-hand page, the right edge of a left-hand one). It stands in for `safe` there, for text and for art alike: the preview's overlay draws and judges that edge against it, the `pdf.print.safe-margins` check fails text or an image closer to the spine than it, and an image pinned to the binding edge (`.gp-pin`) sits on it. The other edges keep `safe` and `artSafe`. Use it when your book keeps its text further from the spine than the printer's minimum: the Field Guide keeps 0.75in (54) where DriveThruRPG asks for 0.5in. Absent = the same as `safe`. Preset default: dtrpg 36 (0.5in, DriveThruRPG's rule for text and non-bleeding art at the binding — the same as its `safe`, declared so a book inherits it visibly); book and custom none.",
           "minimum": 0,
           "examples": [54]
         }

package/dist/{new-nadp2hvb.js → new-fqtt022k.js}

@@ -3,13 +3,13 @@ import {
   EXTENSION_KINDS,
   scaffoldExtension,
   scaffoldProject
-} from "./cli-fbwqv7p4.js";
+} from "./cli-885pcze8.js";
 import {
   resolveGhostscript
-} from "./cli-yejbb9f8.js";
+} from "./cli-5qhjwne5.js";
 import"./cli-ht1bcqdd.js";
-import"./cli-8hccw62p.js";
-import"./cli-sth219v1.js";
+import"./cli-9pk65fqf.js";
+import"./cli-2ppw6q9v.js";
 import"./cli-eyyggect.js";
 import {
   isToolAvailable
@@ -21,16 +21,16 @@ import {
   PRESET_IDS,
   TARGETS,
   TARGET_IDS
-} from "./cli-9vy4b6ec.js";
-import"./cli-pfrg1r9x.js";
-import"./cli-5553w972.js";
+} from "./cli-5et23z83.js";
+import"./cli-pn3z0y9p.js";
+import"./cli-80t93x2r.js";
 import {
   UsageError,
   rejectExtraPositionals,
   rejectUnknownFlags
 } from "./cli-d8xjns66.js";
-import"./cli-gc9av5hs.js";
-import"./cli-gmm3bdeq.js";
+import"./cli-3twpesca.js";
+import"./cli-hndkg7bn.js";
 import {
   EXIT_CODES
 } from "./cli-46ycxe6r.js";

package/dist/{pdf-inspect-zdmy7qca.js → pdf-inspect-wnw4za71.js}

@@ -14,7 +14,7 @@ import {
   pendingGraceDestroyCount,
   retainPdfCache,
   unsplittableTextReasons
-} from "./cli-sth219v1.js";
+} from "./cli-2ppw6q9v.js";
 import"./cli-37x76zdn.js";
 export {
   unsplittableTextReasons,

package/dist/{plugins-yeh4shd7.js → plugins-gfvsgnxb.js}

@@ -8,7 +8,7 @@ import {
   loadPlugins,
   loadPluginsWithCss,
   loadPublishFunction
-} from "./index-38e18a7j.js";
+} from "./index-kx03e4m4.js";
 import"./index-r7jcsk6h.js";
 import"./index-37x76zdn.js";
 export {

package/dist/{plugins-gy4q9vaa.js → plugins-nfxr831f.js}

@@ -8,9 +8,9 @@ import {
   loadPlugins,
   loadPluginsWithCss,
   loadPublishFunction
-} from "./cli-pfrg1r9x.js";
-import"./cli-5553w972.js";
-import"./cli-gc9av5hs.js";
+} from "./cli-pn3z0y9p.js";
+import"./cli-80t93x2r.js";
+import"./cli-3twpesca.js";
 import"./cli-h3phdstf.js";
 import"./cli-37x76zdn.js";
 export {

package/dist/{preflight-c6q25xqa.js → preflight-gr9mscjw.js}

@@ -1,29 +1,29 @@
 import {
   executeValidation,
   reportMissingTools
-} from "./cli-fbwqv7p4.js";
-import"./cli-yejbb9f8.js";
+} from "./cli-885pcze8.js";
+import"./cli-5qhjwne5.js";
 import"./cli-ht1bcqdd.js";
-import"./cli-8hccw62p.js";
-import"./cli-sth219v1.js";
+import"./cli-9pk65fqf.js";
+import"./cli-2ppw6q9v.js";
 import"./cli-eyyggect.js";
 import"./cli-asap4t1z.js";
 import"./cli-habkc5ng.js";
 import"./cli-v5mp7a6q.js";
 import {
   publishTargetFor
-} from "./cli-9vy4b6ec.js";
-import"./cli-pfrg1r9x.js";
+} from "./cli-5et23z83.js";
+import"./cli-pn3z0y9p.js";
 import {
   log
-} from "./cli-5553w972.js";
+} from "./cli-80t93x2r.js";
 import {
   UsageError,
   rejectExtraPositionals,
   rejectUnknownFlags
 } from "./cli-d8xjns66.js";
-import"./cli-gc9av5hs.js";
-import"./cli-gmm3bdeq.js";
+import"./cli-3twpesca.js";
+import"./cli-hndkg7bn.js";
 import {
   BuildError,
   EXIT_CODES

package/dist/{preview-y8chv4cb.js → preview-52w9pdps.js}

@@ -3,23 +3,23 @@ import {
   runBuild,
   splitOutPath,
   startPreviewServer
-} from "./cli-fbwqv7p4.js";
-import"./cli-yejbb9f8.js";
+} from "./cli-885pcze8.js";
+import"./cli-5qhjwne5.js";
 import {
   previewArgs
 } from "./cli-75qkn0k5.js";
 import"./cli-ht1bcqdd.js";
-import"./cli-8hccw62p.js";
-import"./cli-sth219v1.js";
+import"./cli-9pk65fqf.js";
+import"./cli-2ppw6q9v.js";
 import"./cli-eyyggect.js";
 import"./cli-asap4t1z.js";
 import"./cli-habkc5ng.js";
 import"./cli-v5mp7a6q.js";
-import"./cli-9vy4b6ec.js";
-import"./cli-pfrg1r9x.js";
+import"./cli-5et23z83.js";
+import"./cli-pn3z0y9p.js";
 import {
   log
-} from "./cli-5553w972.js";
+} from "./cli-80t93x2r.js";
 import {
   UsageError,
   parseFormat,
@@ -28,8 +28,8 @@ import {
   rejectUnknownFlags,
   resolvePort
 } from "./cli-d8xjns66.js";
-import"./cli-gc9av5hs.js";
-import"./cli-gmm3bdeq.js";
+import"./cli-3twpesca.js";
+import"./cli-hndkg7bn.js";
 import {
   BuildError
 } from "./cli-46ycxe6r.js";

package/dist/{publish-3qwvxsxa.js → publish-esmcyhpb.js}

@@ -10,31 +10,31 @@ import {
   resolvePublishFormat,
   resolvePublishProvider,
   runPublish
-} from "./cli-fbwqv7p4.js";
+} from "./cli-885pcze8.js";
 import {
   FileTokenStore
-} from "./cli-yejbb9f8.js";
+} from "./cli-5qhjwne5.js";
 import"./cli-ht1bcqdd.js";
-import"./cli-8hccw62p.js";
-import"./cli-sth219v1.js";
+import"./cli-9pk65fqf.js";
+import"./cli-2ppw6q9v.js";
 import"./cli-eyyggect.js";
 import"./cli-asap4t1z.js";
 import"./cli-habkc5ng.js";
 import"./cli-v5mp7a6q.js";
 import {
   loadManifestWithPath
-} from "./cli-9vy4b6ec.js";
-import"./cli-pfrg1r9x.js";
+} from "./cli-5et23z83.js";
+import"./cli-pn3z0y9p.js";
 import {
   log
-} from "./cli-5553w972.js";
+} from "./cli-80t93x2r.js";
 import {
   UsageError,
   rejectExtraPositionals,
   rejectUnknownFlags
 } from "./cli-d8xjns66.js";
-import"./cli-gc9av5hs.js";
-import"./cli-gmm3bdeq.js";
+import"./cli-3twpesca.js";
+import"./cli-hndkg7bn.js";
 import {
   BuildError,
   EXIT_CODES