groove-dev 0.26.39 → 0.27.1

package/slides/node_modules/pako/lib/zlib/inftrees.js

@@ -1,343 +0,0 @@
-'use strict';
-
-// (C) 1995-2013 Jean-loup Gailly and Mark Adler
-// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
-//
-// This software is provided 'as-is', without any express or implied
-// warranty. In no event will the authors be held liable for any damages
-// arising from the use of this software.
-//
-// Permission is granted to anyone to use this software for any purpose,
-// including commercial applications, and to alter it and redistribute it
-// freely, subject to the following restrictions:
-//
-// 1. The origin of this software must not be misrepresented; you must not
-//   claim that you wrote the original software. If you use this software
-//   in a product, an acknowledgment in the product documentation would be
-//   appreciated but is not required.
-// 2. Altered source versions must be plainly marked as such, and must not be
-//   misrepresented as being the original software.
-// 3. This notice may not be removed or altered from any source distribution.
-
-var utils = require('../utils/common');
-
-var MAXBITS = 15;
-var ENOUGH_LENS = 852;
-var ENOUGH_DISTS = 592;
-//var ENOUGH = (ENOUGH_LENS+ENOUGH_DISTS);
-
-var CODES = 0;
-var LENS = 1;
-var DISTS = 2;
-
-var lbase = [ /* Length codes 257..285 base */
-  3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-  35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0
-];
-
-var lext = [ /* Length codes 257..285 extra */
-  16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-  19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78
-];
-
-var dbase = [ /* Distance codes 0..29 base */
-  1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-  257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-  8193, 12289, 16385, 24577, 0, 0
-];
-
-var dext = [ /* Distance codes 0..29 extra */
-  16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
-  23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
-  28, 28, 29, 29, 64, 64
-];
-
-module.exports = function inflate_table(type, lens, lens_index, codes, table, table_index, work, opts)
-{
-  var bits = opts.bits;
-      //here = opts.here; /* table entry for duplication */
-
-  var len = 0;               /* a code's length in bits */
-  var sym = 0;               /* index of code symbols */
-  var min = 0, max = 0;          /* minimum and maximum code lengths */
-  var root = 0;              /* number of index bits for root table */
-  var curr = 0;              /* number of index bits for current table */
-  var drop = 0;              /* code bits to drop for sub-table */
-  var left = 0;                   /* number of prefix codes available */
-  var used = 0;              /* code entries in table used */
-  var huff = 0;              /* Huffman code */
-  var incr;              /* for incrementing code, index */
-  var fill;              /* index for replicating entries */
-  var low;               /* low bits for current root entry */
-  var mask;              /* mask for low root bits */
-  var next;             /* next available space in table */
-  var base = null;     /* base value table to use */
-  var base_index = 0;
-//  var shoextra;    /* extra bits table to use */
-  var end;                    /* use base and extra for symbol > end */
-  var count = new utils.Buf16(MAXBITS + 1); //[MAXBITS+1];    /* number of codes of each length */
-  var offs = new utils.Buf16(MAXBITS + 1); //[MAXBITS+1];     /* offsets in table for each length */
-  var extra = null;
-  var extra_index = 0;
-
-  var here_bits, here_op, here_val;
-
-  /*
-   Process a set of code lengths to create a canonical Huffman code.  The
-   code lengths are lens[0..codes-1].  Each length corresponds to the
-   symbols 0..codes-1.  The Huffman code is generated by first sorting the
-   symbols by length from short to long, and retaining the symbol order
-   for codes with equal lengths.  Then the code starts with all zero bits
-   for the first code of the shortest length, and the codes are integer
-   increments for the same length, and zeros are appended as the length
-   increases.  For the deflate format, these bits are stored backwards
-   from their more natural integer increment ordering, and so when the
-   decoding tables are built in the large loop below, the integer codes
-   are incremented backwards.
-
-   This routine assumes, but does not check, that all of the entries in
-   lens[] are in the range 0..MAXBITS.  The caller must assure this.
-   1..MAXBITS is interpreted as that code length.  zero means that that
-   symbol does not occur in this code.
-
-   The codes are sorted by computing a count of codes for each length,
-   creating from that a table of starting indices for each length in the
-   sorted table, and then entering the symbols in order in the sorted
-   table.  The sorted table is work[], with that space being provided by
-   the caller.
-
-   The length counts are used for other purposes as well, i.e. finding
-   the minimum and maximum length codes, determining if there are any
-   codes at all, checking for a valid set of lengths, and looking ahead
-   at length counts to determine sub-table sizes when building the
-   decoding tables.
-   */
-
-  /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
-  for (len = 0; len <= MAXBITS; len++) {
-    count[len] = 0;
-  }
-  for (sym = 0; sym < codes; sym++) {
-    count[lens[lens_index + sym]]++;
-  }
-
-  /* bound code lengths, force root to be within code lengths */
-  root = bits;
-  for (max = MAXBITS; max >= 1; max--) {
-    if (count[max] !== 0) { break; }
-  }
-  if (root > max) {
-    root = max;
-  }
-  if (max === 0) {                     /* no symbols to code at all */
-    //table.op[opts.table_index] = 64;  //here.op = (var char)64;    /* invalid code marker */
-    //table.bits[opts.table_index] = 1;   //here.bits = (var char)1;
-    //table.val[opts.table_index++] = 0;   //here.val = (var short)0;
-    table[table_index++] = (1 << 24) | (64 << 16) | 0;
-
-
-    //table.op[opts.table_index] = 64;
-    //table.bits[opts.table_index] = 1;
-    //table.val[opts.table_index++] = 0;
-    table[table_index++] = (1 << 24) | (64 << 16) | 0;
-
-    opts.bits = 1;
-    return 0;     /* no symbols, but wait for decoding to report error */
-  }
-  for (min = 1; min < max; min++) {
-    if (count[min] !== 0) { break; }
-  }
-  if (root < min) {
-    root = min;
-  }
-
-  /* check for an over-subscribed or incomplete set of lengths */
-  left = 1;
-  for (len = 1; len <= MAXBITS; len++) {
-    left <<= 1;
-    left -= count[len];
-    if (left < 0) {
-      return -1;
-    }        /* over-subscribed */
-  }
-  if (left > 0 && (type === CODES || max !== 1)) {
-    return -1;                      /* incomplete set */
-  }
-
-  /* generate offsets into symbol table for each length for sorting */
-  offs[1] = 0;
-  for (len = 1; len < MAXBITS; len++) {
-    offs[len + 1] = offs[len] + count[len];
-  }
-
-  /* sort symbols by length, by symbol order within each length */
-  for (sym = 0; sym < codes; sym++) {
-    if (lens[lens_index + sym] !== 0) {
-      work[offs[lens[lens_index + sym]]++] = sym;
-    }
-  }
-
-  /*
-   Create and fill in decoding tables.  In this loop, the table being
-   filled is at next and has curr index bits.  The code being used is huff
-   with length len.  That code is converted to an index by dropping drop
-   bits off of the bottom.  For codes where len is less than drop + curr,
-   those top drop + curr - len bits are incremented through all values to
-   fill the table with replicated entries.
-
-   root is the number of index bits for the root table.  When len exceeds
-   root, sub-tables are created pointed to by the root entry with an index
-   of the low root bits of huff.  This is saved in low to check for when a
-   new sub-table should be started.  drop is zero when the root table is
-   being filled, and drop is root when sub-tables are being filled.
-
-   When a new sub-table is needed, it is necessary to look ahead in the
-   code lengths to determine what size sub-table is needed.  The length
-   counts are used for this, and so count[] is decremented as codes are
-   entered in the tables.
-
-   used keeps track of how many table entries have been allocated from the
-   provided *table space.  It is checked for LENS and DIST tables against
-   the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
-   the initial root table size constants.  See the comments in inftrees.h
-   for more information.
-
-   sym increments through all symbols, and the loop terminates when
-   all codes of length max, i.e. all codes, have been processed.  This
-   routine permits incomplete codes, so another loop after this one fills
-   in the rest of the decoding tables with invalid code markers.
-   */
-
-  /* set up for code type */
-  // poor man optimization - use if-else instead of switch,
-  // to avoid deopts in old v8
-  if (type === CODES) {
-    base = extra = work;    /* dummy value--not used */
-    end = 19;
-
-  } else if (type === LENS) {
-    base = lbase;
-    base_index -= 257;
-    extra = lext;
-    extra_index -= 257;
-    end = 256;
-
-  } else {                    /* DISTS */
-    base = dbase;
-    extra = dext;
-    end = -1;
-  }
-
-  /* initialize opts for loop */
-  huff = 0;                   /* starting code */
-  sym = 0;                    /* starting code symbol */
-  len = min;                  /* starting code length */
-  next = table_index;              /* current table to fill in */
-  curr = root;                /* current table index bits */
-  drop = 0;                   /* current bits to drop from code for index */
-  low = -1;                   /* trigger new sub-table when len > root */
-  used = 1 << root;          /* use root table entries */
-  mask = used - 1;            /* mask for comparing low */
-
-  /* check available table space */
-  if ((type === LENS && used > ENOUGH_LENS) ||
-    (type === DISTS && used > ENOUGH_DISTS)) {
-    return 1;
-  }
-
-  /* process all codes and make table entries */
-  for (;;) {
-    /* create table entry */
-    here_bits = len - drop;
-    if (work[sym] < end) {
-      here_op = 0;
-      here_val = work[sym];
-    }
-    else if (work[sym] > end) {
-      here_op = extra[extra_index + work[sym]];
-      here_val = base[base_index + work[sym]];
-    }
-    else {
-      here_op = 32 + 64;         /* end of block */
-      here_val = 0;
-    }
-
-    /* replicate for those indices with low len bits equal to huff */
-    incr = 1 << (len - drop);
-    fill = 1 << curr;
-    min = fill;                 /* save offset to next table */
-    do {
-      fill -= incr;
-      table[next + (huff >> drop) + fill] = (here_bits << 24) | (here_op << 16) | here_val |0;
-    } while (fill !== 0);
-
-    /* backwards increment the len-bit code huff */
-    incr = 1 << (len - 1);
-    while (huff & incr) {
-      incr >>= 1;
-    }
-    if (incr !== 0) {
-      huff &= incr - 1;
-      huff += incr;
-    } else {
-      huff = 0;
-    }
-
-    /* go to next symbol, update count, len */
-    sym++;
-    if (--count[len] === 0) {
-      if (len === max) { break; }
-      len = lens[lens_index + work[sym]];
-    }
-
-    /* create new sub-table if needed */
-    if (len > root && (huff & mask) !== low) {
-      /* if first time, transition to sub-tables */
-      if (drop === 0) {
-        drop = root;
-      }
-
-      /* increment past last table */
-      next += min;            /* here min is 1 << curr */
-
-      /* determine length of next table */
-      curr = len - drop;
-      left = 1 << curr;
-      while (curr + drop < max) {
-        left -= count[curr + drop];
-        if (left <= 0) { break; }
-        curr++;
-        left <<= 1;
-      }
-
-      /* check for enough space */
-      used += 1 << curr;
-      if ((type === LENS && used > ENOUGH_LENS) ||
-        (type === DISTS && used > ENOUGH_DISTS)) {
-        return 1;
-      }
-
-      /* point entry in root table to sub-table */
-      low = huff & mask;
-      /*table.op[low] = curr;
-      table.bits[low] = root;
-      table.val[low] = next - opts.table_index;*/
-      table[low] = (root << 24) | (curr << 16) | (next - table_index) |0;
-    }
-  }
-
-  /* fill in remaining table entry if code is incomplete (guaranteed to have
-   at most one remaining entry, since if the code is incomplete, the
-   maximum code length that was allowed to get this far is one bit) */
-  if (huff !== 0) {
-    //table.op[next + huff] = 64;            /* invalid code marker */
-    //table.bits[next + huff] = len - drop;
-    //table.val[next + huff] = 0;
-    table[next + huff] = ((len - drop) << 24) | (64 << 16) |0;
-  }
-
-  /* set return parameters */
-  //opts.table_index += used;
-  opts.bits = root;
-  return 0;
-};

package/slides/node_modules/pako/lib/zlib/messages.js

@@ -1,32 +0,0 @@
-'use strict';
-
-// (C) 1995-2013 Jean-loup Gailly and Mark Adler
-// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
-//
-// This software is provided 'as-is', without any express or implied
-// warranty. In no event will the authors be held liable for any damages
-// arising from the use of this software.
-//
-// Permission is granted to anyone to use this software for any purpose,
-// including commercial applications, and to alter it and redistribute it
-// freely, subject to the following restrictions:
-//
-// 1. The origin of this software must not be misrepresented; you must not
-//   claim that you wrote the original software. If you use this software
-//   in a product, an acknowledgment in the product documentation would be
-//   appreciated but is not required.
-// 2. Altered source versions must be plainly marked as such, and must not be
-//   misrepresented as being the original software.
-// 3. This notice may not be removed or altered from any source distribution.
-
-module.exports = {
-  2:      'need dictionary',     /* Z_NEED_DICT       2  */
-  1:      'stream end',          /* Z_STREAM_END      1  */
-  0:      '',                    /* Z_OK              0  */
-  '-1':   'file error',          /* Z_ERRNO         (-1) */
-  '-2':   'stream error',        /* Z_STREAM_ERROR  (-2) */
-  '-3':   'data error',          /* Z_DATA_ERROR    (-3) */
-  '-4':   'insufficient memory', /* Z_MEM_ERROR     (-4) */
-  '-5':   'buffer error',        /* Z_BUF_ERROR     (-5) */
-  '-6':   'incompatible version' /* Z_VERSION_ERROR (-6) */
-};