gofront 1.8.0 → 1.9.1

package/stdlib/encoding/base64/base64.go

@@ -0,0 +1,331 @@
+//go:build gofront
+
+//gofront:target both
+
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package base64 implements base64 encoding as specified by RFC 4648.
+package base64
+
+import "strconv"
+
+// An Encoding is a radix 64 encoding/decoding scheme, defined by a
+// 64-character alphabet. The most common encoding is the "base64"
+// encoding defined in RFC 4648 and used in MIME (RFC 2045) and PEM
+// (RFC 1421). RFC 4648 also defines an alternate encoding, which is
+// the standard encoding with - and _ substituted for + and /.
+type Encoding struct {
+	encode    [64]byte
+	decodeMap [256]uint8
+	padChar   rune
+}
+
+const (
+	StdPadding rune = '=' // Standard padding character
+	NoPadding  rune = -1  // No padding
+)
+
+const (
+	encodeStd = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"
+	encodeURL = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789-_"
+)
+
+// NewEncoding returns a new padded Encoding defined by the given alphabet,
+// which must be a 64-byte string that does not contain the padding character
+// or CR / LF ('\r', '\n'). The alphabet is treated as a sequence of byte
+// values without any special treatment for multi-byte UTF-8.
+// The resulting Encoding uses the default padding character ('='),
+// which may be changed or disabled via [Encoding.WithPadding].
+func NewEncoding(encoder string) *Encoding {
+	if len(encoder) != 64 {
+		panic("encoding alphabet is not 64-bytes long")
+	}
+
+	e := new(Encoding)
+	e.padChar = StdPadding
+	for i := 0; i < len(e.decodeMap); i++ {
+		e.decodeMap[i] = 0xff
+	}
+	for i := 0; i < len(encoder); i++ {
+		c := byte(encoder[i])
+		switch {
+		case c == '\n' || c == '\r':
+			panic("encoding alphabet contains newline character")
+		case e.decodeMap[c] != 0xff:
+			panic("encoding alphabet includes duplicate symbols")
+		}
+		e.encode[i] = c
+		e.decodeMap[c] = uint8(i)
+	}
+	return e
+}
+
+// WithPadding creates a new encoding identical to enc except
+// with a specified padding character, or NoPadding to disable padding.
+// The padding character must not be '\r' or '\n',
+// must not be contained in the encoding's alphabet,
+// must not be negative, and must be a rune equal or below '\xff'.
+// Padding characters above '\x7f' are encoded as their exact byte value
+// rather than using the UTF-8 representation of the codepoint.
+func (enc Encoding) WithPadding(padding rune) *Encoding {
+	switch {
+	case padding < NoPadding || padding == '\r' || padding == '\n' || padding > 0xff:
+		panic("invalid padding")
+	case padding != NoPadding && enc.decodeMap[byte(padding)] != 0xff:
+		panic("padding contained in alphabet")
+	}
+	enc.padChar = padding
+	return &enc
+}
+
+// StdEncoding is the standard base64 encoding, as defined in RFC 4648.
+var StdEncoding = NewEncoding(encodeStd)
+
+// URLEncoding is the alternate base64 encoding defined in RFC 4648.
+// It is typically used in URLs and file names.
+var URLEncoding = NewEncoding(encodeURL)
+
+// RawStdEncoding is the standard raw, unpadded base64 encoding,
+// as defined in RFC 4648 section 3.2.
+// This is the same as [StdEncoding] but omits padding characters.
+var RawStdEncoding = StdEncoding.WithPadding(NoPadding)
+
+// RawURLEncoding is the unpadded alternate base64 encoding defined in RFC 4648.
+// It is typically used in URLs and file names.
+// This is the same as [URLEncoding] but omits padding characters.
+var RawURLEncoding = URLEncoding.WithPadding(NoPadding)
+
+// Encode encodes src using the encoding enc,
+// writing [Encoding.EncodedLen](len(src)) bytes to dst.
+//
+// The encoding pads the output to a multiple of 4 bytes,
+// so Encode is not appropriate for use on individual blocks
+// of a large data stream.
+func (enc *Encoding) Encode(dst, src []byte) {
+	if len(src) == 0 {
+		return
+	}
+
+	di, si := 0, 0
+	n := (len(src) / 3) * 3
+	for si < n {
+		// Convert 3x 8bit source bytes into 4 bytes
+		val := uint(src[si+0])<<16 | uint(src[si+1])<<8 | uint(src[si+2])
+
+		dst[di+0] = enc.encode[val>>18&0x3F]
+		dst[di+1] = enc.encode[val>>12&0x3F]
+		dst[di+2] = enc.encode[val>>6&0x3F]
+		dst[di+3] = enc.encode[val&0x3F]
+
+		si += 3
+		di += 4
+	}
+
+	remain := len(src) - si
+	if remain == 0 {
+		return
+	}
+	// Add the remaining small block
+	val := uint(src[si+0]) << 16
+	if remain == 2 {
+		val |= uint(src[si+1]) << 8
+	}
+
+	dst[di+0] = enc.encode[val>>18&0x3F]
+	dst[di+1] = enc.encode[val>>12&0x3F]
+
+	switch remain {
+	case 2:
+		dst[di+2] = enc.encode[val>>6&0x3F]
+		if enc.padChar != NoPadding {
+			dst[di+3] = byte(enc.padChar)
+		}
+	case 1:
+		if enc.padChar != NoPadding {
+			dst[di+2] = byte(enc.padChar)
+			dst[di+3] = byte(enc.padChar)
+		}
+	}
+}
+
+// AppendEncode appends the base64 encoded src to dst
+// and returns the extended buffer.
+func (enc *Encoding) AppendEncode(dst, src []byte) []byte {
+	buf := make([]byte, enc.EncodedLen(len(src)))
+	enc.Encode(buf, src)
+	return append(dst, buf...)
+}
+
+// EncodeToString returns the base64 encoding of src.
+func (enc *Encoding) EncodeToString(src []byte) string {
+	buf := make([]byte, enc.EncodedLen(len(src)))
+	enc.Encode(buf, src)
+	return string(buf)
+}
+
+// EncodedLen returns the length in bytes of the base64 encoding
+// of an input buffer of length n.
+func (enc *Encoding) EncodedLen(n int) int {
+	if enc.padChar == NoPadding {
+		return n/3*4 + (n%3*8+5)/6 // minimum # chars at 6 bits per char
+	}
+	return (n + 2) / 3 * 4 // minimum # 4-char quanta, 3 bytes each
+}
+
+/*
+ * Decoder
+ */
+
+type CorruptInputError int64
+
+func (e CorruptInputError) Error() string {
+	return "illegal base64 data at input byte " + strconv.FormatInt(int64(e), 10)
+}
+
+// decodeQuantum decodes up to 4 base64 bytes. The received parameters are
+// the destination buffer dst, the source buffer src and an index in the
+// source buffer si.
+// It returns the number of bytes read from src, the number of bytes written
+// to dst, and an error, if any.
+func (enc *Encoding) decodeQuantum(dst, src []byte, si int) (nsi, n int, err error) {
+	// Decode quantum using the base64 alphabet
+	var dbuf [4]byte
+	dlen := 4
+
+	for j := 0; j < len(dbuf); j++ {
+		if len(src) == si {
+			if j == 0 {
+				return si, 0, nil
+			}
+			if j == 1 || enc.padChar != NoPadding {
+				return si, 0, CorruptInputError(si - j)
+			}
+			dlen = j
+			break
+		}
+		in := src[si]
+		si++
+
+		out := enc.decodeMap[in]
+		if out != 0xff {
+			dbuf[j] = out
+			continue
+		}
+
+		if in == '\n' || in == '\r' {
+			j--
+			continue
+		}
+
+		if rune(in) != enc.padChar {
+			return si, 0, CorruptInputError(si - 1)
+		}
+
+		// We've reached the end and there's padding
+		switch j {
+		case 0, 1:
+			// incorrect padding
+			return si, 0, CorruptInputError(si - 1)
+		case 2:
+			// "==" is expected, the first "=" is already consumed.
+			// skip over newlines
+			for si < len(src) && (src[si] == '\n' || src[si] == '\r') {
+				si++
+			}
+			if si == len(src) {
+				// not enough padding
+				return si, 0, CorruptInputError(len(src))
+			}
+			if rune(src[si]) != enc.padChar {
+				// incorrect padding
+				return si, 0, CorruptInputError(si - 1)
+			}
+
+			si++
+		}
+
+		// skip over newlines
+		for si < len(src) && (src[si] == '\n' || src[si] == '\r') {
+			si++
+		}
+		if si < len(src) {
+			// trailing garbage
+			err = CorruptInputError(si)
+		}
+		dlen = j
+		break
+	}
+
+	// Convert 4x 6bit source bytes into 3 bytes
+	val := uint(dbuf[0])<<18 | uint(dbuf[1])<<12 | uint(dbuf[2])<<6 | uint(dbuf[3])
+	dbuf[2], dbuf[1], dbuf[0] = byte(val>>0), byte(val>>8), byte(val>>16)
+	if dlen >= 4 {
+		dst[2] = dbuf[2]
+	}
+	if dlen >= 3 {
+		dst[1] = dbuf[1]
+	}
+	if dlen >= 2 {
+		dst[0] = dbuf[0]
+	}
+	return si, dlen - 1, err
+}
+
+// DecodeString returns the bytes represented by the base64 string s.
+// If the input is malformed, DecodeString returns the bytes decoded before
+// the error.
+func (enc *Encoding) DecodeString(s string) ([]byte, error) {
+	dbuf := make([]byte, enc.DecodedLen(len(s)))
+	n, err := enc.Decode(dbuf, []byte(s))
+	return dbuf[:n], err
+}
+
+// Decode decodes src using the encoding enc. It writes at most
+// [Encoding.DecodedLen](len(src)) bytes to dst and returns the number of bytes
+// written. The caller must ensure that dst is large enough to hold all
+// the decoded data. If src contains invalid base64 data, it will return the
+// number of bytes successfully written and [CorruptInputError].
+// New line characters (\r and \n) are ignored.
+func (enc *Encoding) Decode(dst, src []byte) (n int, err error) {
+	if len(src) == 0 {
+		return 0, nil
+	}
+
+	si := 0
+	for si < len(src) {
+		var ninc int
+		si, ninc, err = enc.decodeQuantum(dst[n:], src, si)
+		n += ninc
+		if err != nil {
+			return n, err
+		}
+	}
+	return n, err
+}
+
+// AppendDecode appends the base64 decoded src to dst
+// and returns the extended buffer.
+// If the input is malformed, it returns the partially decoded src and an error.
+// New line characters (\r and \n) are ignored.
+func (enc *Encoding) AppendDecode(dst, src []byte) ([]byte, error) {
+	buf := make([]byte, enc.DecodedLen(len(src)))
+	n, err := enc.Decode(buf, src)
+	return append(dst, buf[:n]...), err
+}
+
+// DecodedLen returns the maximum length in bytes of the decoded data
+// corresponding to n bytes of base64-encoded data.
+func (enc *Encoding) DecodedLen(n int) int {
+	return decodedLen(n, enc.padChar)
+}
+
+func decodedLen(n int, padChar rune) int {
+	if padChar == NoPadding {
+		// Unpadded data may end with partial block of 2-3 characters.
+		return n / 4 * 3 + n % 4 * 6 / 8
+	}
+	// Padded base64 should always be a multiple of 4 characters in length.
+	return n / 4 * 3
+}

package/stdlib/encoding/binary/binary.go

@@ -0,0 +1,332 @@
+//go:build gofront
+
+//gofront:target both
+
+// Copyright 2009 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Overlay on the emitter-backed encoding/binary package: byte orders and
+// variable-length integers written in Go.  Read, Write and Size walk the
+// fields of an `any`, so they remain emitter members.
+package binary
+
+import (
+	"errors"
+	"io"
+)
+
+// A ByteOrder specifies how to convert byte slices into
+// 16-, 32-, or 64-bit unsigned integers.
+type ByteOrder interface {
+	Uint16([]byte) uint16
+	Uint32([]byte) uint32
+	Uint64([]byte) uint64
+	PutUint16([]byte, uint16)
+	PutUint32([]byte, uint32)
+	PutUint64([]byte, uint64)
+	String() string
+}
+
+// AppendByteOrder specifies how to append 16-, 32-, or 64-bit unsigned integers
+// into a byte slice.
+type AppendByteOrder interface {
+	AppendUint16([]byte, uint16) []byte
+	AppendUint32([]byte, uint32) []byte
+	AppendUint64([]byte, uint64) []byte
+	String() string
+}
+
+// LittleEndian is the little-endian implementation of [ByteOrder] and [AppendByteOrder].
+var LittleEndian littleEndian
+
+// BigEndian is the big-endian implementation of [ByteOrder] and [AppendByteOrder].
+var BigEndian bigEndian
+
+type littleEndian struct{}
+
+func (littleEndian) Uint16(b []byte) uint16 {
+	_ = b[1] // bounds check hint to compiler; see golang.org/issue/14808
+	return uint16(b[0]) | uint16(b[1])<<8
+}
+
+func (littleEndian) PutUint16(b []byte, v uint16) {
+	_ = b[1] // early bounds check to guarantee safety of writes below
+	b[0] = byte(v)
+	b[1] = byte(v >> 8)
+}
+
+func (littleEndian) AppendUint16(b []byte, v uint16) []byte {
+	return append(b,
+		byte(v),
+		byte(v>>8),
+	)
+}
+
+func (littleEndian) Uint32(b []byte) uint32 {
+	_ = b[3] // bounds check hint to compiler; see golang.org/issue/14808
+	return uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 | uint32(b[3])<<24
+}
+
+func (littleEndian) PutUint32(b []byte, v uint32) {
+	_ = b[3] // early bounds check to guarantee safety of writes below
+	b[0] = byte(v)
+	b[1] = byte(v >> 8)
+	b[2] = byte(v >> 16)
+	b[3] = byte(v >> 24)
+}
+
+func (littleEndian) AppendUint32(b []byte, v uint32) []byte {
+	return append(b,
+		byte(v),
+		byte(v>>8),
+		byte(v>>16),
+		byte(v>>24),
+	)
+}
+
+func (littleEndian) Uint64(b []byte) uint64 {
+	_ = b[7] // bounds check hint to compiler; see golang.org/issue/14808
+	return uint64(b[0]) | uint64(b[1])<<8 | uint64(b[2])<<16 | uint64(b[3])<<24 |
+		uint64(b[4])<<32 | uint64(b[5])<<40 | uint64(b[6])<<48 | uint64(b[7])<<56
+}
+
+func (littleEndian) PutUint64(b []byte, v uint64) {
+	_ = b[7] // early bounds check to guarantee safety of writes below
+	b[0] = byte(v)
+	b[1] = byte(v >> 8)
+	b[2] = byte(v >> 16)
+	b[3] = byte(v >> 24)
+	b[4] = byte(v >> 32)
+	b[5] = byte(v >> 40)
+	b[6] = byte(v >> 48)
+	b[7] = byte(v >> 56)
+}
+
+func (littleEndian) AppendUint64(b []byte, v uint64) []byte {
+	return append(b,
+		byte(v),
+		byte(v>>8),
+		byte(v>>16),
+		byte(v>>24),
+		byte(v>>32),
+		byte(v>>40),
+		byte(v>>48),
+		byte(v>>56),
+	)
+}
+
+func (littleEndian) String() string { return "LittleEndian" }
+
+func (littleEndian) GoString() string { return "binary.LittleEndian" }
+
+type bigEndian struct{}
+
+func (bigEndian) Uint16(b []byte) uint16 {
+	_ = b[1] // bounds check hint to compiler; see golang.org/issue/14808
+	return uint16(b[1]) | uint16(b[0])<<8
+}
+
+func (bigEndian) PutUint16(b []byte, v uint16) {
+	_ = b[1] // early bounds check to guarantee safety of writes below
+	b[0] = byte(v >> 8)
+	b[1] = byte(v)
+}
+
+func (bigEndian) AppendUint16(b []byte, v uint16) []byte {
+	return append(b,
+		byte(v>>8),
+		byte(v),
+	)
+}
+
+func (bigEndian) Uint32(b []byte) uint32 {
+	_ = b[3] // bounds check hint to compiler; see golang.org/issue/14808
+	return uint32(b[3]) | uint32(b[2])<<8 | uint32(b[1])<<16 | uint32(b[0])<<24
+}
+
+func (bigEndian) PutUint32(b []byte, v uint32) {
+	_ = b[3] // early bounds check to guarantee safety of writes below
+	b[0] = byte(v >> 24)
+	b[1] = byte(v >> 16)
+	b[2] = byte(v >> 8)
+	b[3] = byte(v)
+}
+
+func (bigEndian) AppendUint32(b []byte, v uint32) []byte {
+	return append(b,
+		byte(v>>24),
+		byte(v>>16),
+		byte(v>>8),
+		byte(v),
+	)
+}
+
+func (bigEndian) Uint64(b []byte) uint64 {
+	_ = b[7] // bounds check hint to compiler; see golang.org/issue/14808
+	return uint64(b[7]) | uint64(b[6])<<8 | uint64(b[5])<<16 | uint64(b[4])<<24 |
+		uint64(b[3])<<32 | uint64(b[2])<<40 | uint64(b[1])<<48 | uint64(b[0])<<56
+}
+
+func (bigEndian) PutUint64(b []byte, v uint64) {
+	_ = b[7] // early bounds check to guarantee safety of writes below
+	b[0] = byte(v >> 56)
+	b[1] = byte(v >> 48)
+	b[2] = byte(v >> 40)
+	b[3] = byte(v >> 32)
+	b[4] = byte(v >> 24)
+	b[5] = byte(v >> 16)
+	b[6] = byte(v >> 8)
+	b[7] = byte(v)
+}
+
+func (bigEndian) AppendUint64(b []byte, v uint64) []byte {
+	return append(b,
+		byte(v>>56),
+		byte(v>>48),
+		byte(v>>40),
+		byte(v>>32),
+		byte(v>>24),
+		byte(v>>16),
+		byte(v>>8),
+		byte(v),
+	)
+}
+
+func (bigEndian) String() string { return "BigEndian" }
+
+func (bigEndian) GoString() string { return "binary.BigEndian" }
+
+// MaxVarintLenN is the maximum length of a varint-encoded N-bit integer.
+const (
+	MaxVarintLen16 = 3
+	MaxVarintLen32 = 5
+	MaxVarintLen64 = 10
+)
+
+// AppendUvarint appends the varint-encoded form of x,
+// as generated by [PutUvarint], to buf and returns the extended buffer.
+func AppendUvarint(buf []byte, x uint64) []byte {
+	for x >= 0x80 {
+		buf = append(buf, byte(x)|0x80)
+		x >>= 7
+	}
+	return append(buf, byte(x))
+}
+
+// PutUvarint encodes a uint64 into buf and returns the number of bytes written.
+// If the buffer is too small, PutUvarint will panic.
+func PutUvarint(buf []byte, x uint64) int {
+	i := 0
+	for x >= 0x80 {
+		buf[i] = byte(x) | 0x80
+		x >>= 7
+		i++
+	}
+	buf[i] = byte(x)
+	return i + 1
+}
+
+// Uvarint decodes a uint64 from buf and returns that value and the
+// number of bytes read (> 0). If an error occurred, the value is 0
+// and the number of bytes n is <= 0 meaning:
+//   - n == 0: buf too small;
+//   - n < 0: value larger than 64 bits (overflow) and -n is the number of
+//     bytes read.
+func Uvarint(buf []byte) (uint64, int) {
+	var x uint64
+	var s uint
+	for i, b := range buf {
+		if i == MaxVarintLen64 {
+			// Catch byte reads past MaxVarintLen64.
+			// See issue https://golang.org/issues/41185
+			return 0, -(i + 1) // overflow
+		}
+		if b < 0x80 {
+			if i == MaxVarintLen64-1 && b > 1 {
+				return 0, -(i + 1) // overflow
+			}
+			return x | uint64(b)<<s, i + 1
+		}
+		x |= uint64(b&0x7f) << s
+		s += 7
+	}
+	return 0, 0
+}
+
+// AppendVarint appends the varint-encoded form of x,
+// as generated by [PutVarint], to buf and returns the extended buffer.
+func AppendVarint(buf []byte, x int64) []byte {
+	ux := uint64(x) << 1
+	if x < 0 {
+		ux = ^ux
+	}
+	return AppendUvarint(buf, ux)
+}
+
+// PutVarint encodes an int64 into buf and returns the number of bytes written.
+// If the buffer is too small, PutVarint will panic.
+func PutVarint(buf []byte, x int64) int {
+	ux := uint64(x) << 1
+	if x < 0 {
+		ux = ^ux
+	}
+	return PutUvarint(buf, ux)
+}
+
+// Varint decodes an int64 from buf and returns that value and the
+// number of bytes read (> 0). If an error occurred, the value is 0
+// and the number of bytes n is <= 0 with the following meaning:
+//   - n == 0: buf too small;
+//   - n < 0: value larger than 64 bits (overflow) and -n is the number of
+//     bytes read.
+func Varint(buf []byte) (int64, int) {
+	ux, n := Uvarint(buf) // ok to continue in presence of error
+	x := int64(ux >> 1)
+	if ux&1 != 0 {
+		x = ^x
+	}
+	return x, n
+}
+
+var errOverflow = errors.New("binary: varint overflows a 64-bit integer")
+
+// ReadUvarint reads an encoded unsigned integer from r and returns it as a uint64.
+// The error is [io.EOF] only if no bytes were read.
+// If an [io.EOF] happens after reading some but not all the bytes,
+// ReadUvarint returns [io.ErrUnexpectedEOF].
+func ReadUvarint(r io.ByteReader) (uint64, error) {
+	var x uint64
+	var s uint
+	for i := 0; i < MaxVarintLen64; i++ {
+		b, err := r.ReadByte()
+		if err != nil {
+			if i > 0 && err == io.EOF {
+				err = io.ErrUnexpectedEOF
+			}
+			return x, err
+		}
+		if b < 0x80 {
+			if i == MaxVarintLen64-1 && b > 1 {
+				return x, errOverflow
+			}
+			return x | uint64(b)<<s, nil
+		}
+		x |= uint64(b&0x7f) << s
+		s += 7
+	}
+	return x, errOverflow
+}
+
+// ReadVarint reads an encoded signed integer from r and returns it as an int64.
+// The error is [io.EOF] only if no bytes were read.
+// If an [io.EOF] happens after reading some but not all the bytes,
+// ReadVarint returns [io.ErrUnexpectedEOF].
+func ReadVarint(r io.ByteReader) (int64, error) {
+	ux, err := ReadUvarint(r) // ok to continue in presence of error
+	x := int64(ux >> 1)
+	if ux&1 != 0 {
+		x = ^x
+	}
+	return x, err
+}