gofront 1.8.0 → 1.9.0

package/stdlib/time/duration.go

@@ -0,0 +1,233 @@
+//go:build gofront
+
+//gofront:target both
+
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package time
+
+// A Duration represents the elapsed time between two instants as an int64
+// nanosecond count. The representation limits the largest representable
+// duration to approximately 290 years.
+type Duration int64
+
+const (
+	minDuration Duration = -1 << 63
+	maxDuration Duration = 1<<63 - 1
+)
+
+// Common durations. There is no definition for units of Day or larger to
+// avoid confusion across daylight savings time zone transitions.
+const (
+	Nanosecond  Duration = 1
+	Microsecond          = 1000 * Nanosecond
+	Millisecond          = 1000 * Microsecond
+	Second               = 1000 * Millisecond
+	Minute               = 60 * Second
+	Hour                 = 60 * Minute
+)
+
+// String returns a string representing the duration in the form "72h3m0.5s".
+// Leading zero units are omitted. As a special case, durations less than one
+// second format use a smaller unit (milli-, micro-, or nanoseconds) to ensure
+// that the leading digit is non-zero. The zero duration formats as 0s.
+func (d Duration) String() string {
+	buf := make([]byte, 32)
+	w := len(buf)
+
+	u := uint64(d)
+	neg := d < 0
+	if neg {
+		u = -u
+	}
+
+	if u < uint64(Second) {
+		// Special case: if duration is smaller than a second,
+		// use smaller units, like 1.2ms
+		var prec int
+		w--
+		buf[w] = 's'
+		w--
+		switch {
+		case u == 0:
+			return "0s"
+		case u < uint64(Microsecond):
+			// print nanoseconds
+			prec = 0
+			buf[w] = 'n'
+		case u < uint64(Millisecond):
+			// print microseconds: U+00B5 'µ' micro sign == 0xC2 0xB5
+			prec = 3
+			w--
+			buf[w] = 0xC2
+			buf[w+1] = 0xB5
+		default:
+			// print milliseconds
+			prec = 6
+			buf[w] = 'm'
+		}
+		w, u = fmtFrac(buf, w, u, prec)
+		w = fmtInt(buf, w, u)
+	} else {
+		w--
+		buf[w] = 's'
+
+		w, u = fmtFrac(buf, w, u, 9)
+
+		// u is now integer seconds
+		w = fmtInt(buf, w, u%60)
+		u /= 60
+
+		// u is now integer minutes
+		if u > 0 {
+			w--
+			buf[w] = 'm'
+			w = fmtInt(buf, w, u%60)
+			u /= 60
+
+			// u is now integer hours
+			// Stop at hours because days can be different lengths.
+			if u > 0 {
+				w--
+				buf[w] = 'h'
+				w = fmtInt(buf, w, u)
+			}
+		}
+	}
+
+	if neg {
+		w--
+		buf[w] = '-'
+	}
+
+	return string(buf[w:])
+}
+
+// fmtFrac formats the fraction of v/10**prec (e.g., ".12345") into the tail
+// of buf at w, omitting trailing zeros. It omits the decimal point too when
+// the fraction is 0. It returns the index where the output bytes begin and
+// the value v/10**prec.
+func fmtFrac(buf []byte, w int, v uint64, prec int) (nw int, nv uint64) {
+	// Omit trailing zeros up to and including decimal point.
+	print := false
+	for i := 0; i < prec; i++ {
+		digit := v % 10
+		print = print || digit != 0
+		if print {
+			w--
+			buf[w] = byte(digit) + '0'
+		}
+		v /= 10
+	}
+	if print {
+		w--
+		buf[w] = '.'
+	}
+	return w, v
+}
+
+// fmtInt formats v into the tail of buf at w. It returns the index where the
+// output begins.
+func fmtInt(buf []byte, w int, v uint64) int {
+	if v == 0 {
+		w--
+		buf[w] = '0'
+	} else {
+		for v > 0 {
+			w--
+			buf[w] = byte(v%10) + '0'
+			v /= 10
+		}
+	}
+	return w
+}
+
+// Nanoseconds returns the duration as an integer nanosecond count.
+func (d Duration) Nanoseconds() int64 { return int64(d) }
+
+// Microseconds returns the duration as an integer microsecond count.
+func (d Duration) Microseconds() int64 { return int64(d) / 1000 }
+
+// Milliseconds returns the duration as an integer millisecond count.
+func (d Duration) Milliseconds() int64 { return int64(d) / 1000000 }
+
+// Seconds returns the duration as a floating point number of seconds.
+func (d Duration) Seconds() float64 {
+	sec := d / Second
+	nsec := d % Second
+	return float64(sec) + float64(nsec)/1e9
+}
+
+// Minutes returns the duration as a floating point number of minutes.
+func (d Duration) Minutes() float64 {
+	min := d / Minute
+	nsec := d % Minute
+	return float64(min) + float64(nsec)/(60*1e9)
+}
+
+// Hours returns the duration as a floating point number of hours.
+func (d Duration) Hours() float64 {
+	h := d / Hour
+	nsec := d % Hour
+	return float64(h) + float64(nsec)/(60*60*1e9)
+}
+
+// Truncate returns the result of rounding d toward zero to a multiple of m.
+// If m <= 0, Truncate returns d unchanged.
+func (d Duration) Truncate(m Duration) Duration {
+	if m <= 0 {
+		return d
+	}
+	return d - d%m
+}
+
+// lessThanHalf reports whether x+x < y but avoids overflow, assuming x and y
+// are both positive.
+func lessThanHalf(x, y Duration) bool {
+	return uint64(x)+uint64(x) < uint64(y)
+}
+
+// Round returns the result of rounding d to the nearest multiple of m. The
+// rounding behavior for halfway values is to round away from zero. If the
+// result exceeds the maximum (or minimum) value that can be stored in a
+// Duration, Round returns the maximum (or minimum) duration. If m <= 0, Round
+// returns d unchanged.
+func (d Duration) Round(m Duration) Duration {
+	if m <= 0 {
+		return d
+	}
+	r := d % m
+	if d < 0 {
+		r = -r
+		if lessThanHalf(r, m) {
+			return d + r
+		}
+		if d1 := d - m + r; d1 < d {
+			return d1
+		}
+		return minDuration // overflow
+	}
+	if lessThanHalf(r, m) {
+		return d - r
+	}
+	if d1 := d + m - r; d1 > d {
+		return d1
+	}
+	return maxDuration // overflow
+}
+
+// Abs returns the absolute value of d. As a special case, Duration(math.MinInt64)
+// is converted to Duration(math.MaxInt64), reducing its magnitude by 1
+// nanosecond.
+func (d Duration) Abs() Duration {
+	switch {
+	case d >= 0:
+		return d
+	case d == minDuration:
+		return maxDuration
+	default:
+		return -d
+	}
+}