glidercli 0.1.2 → 0.1.3

package/.github/hooks/post-checkout

@@ -0,0 +1,24 @@
+#!/bin/bash
+# Auto-prompt to set email on checkout if not set correctly
+# If allowed_emails is empty, skip check
+
+ROOT="$(git rev-parse --show-toplevel 2>/dev/null)"
+CONFIG="$ROOT/repo.config.json"
+EMAIL=$(git config user.email 2>/dev/null)
+
+# Read allowed emails from config
+if [[ -f "$CONFIG" ]] && command -v jq &>/dev/null; then
+    ALLOWED=$(jq -r '.allowed_emails[]' "$CONFIG" 2>/dev/null)
+else
+    exit 0
+fi
+
+# If no emails configured, skip check
+[[ -z "$ALLOWED" ]] && exit 0
+
+echo "$ALLOWED" | grep -qx "$EMAIL" && exit 0
+
+echo ""
+echo "⚠ Git email not set. Pick one from repo.config.json:"
+echo "$ALLOWED" | sed 's/^/  git config user.email '\''/' | sed 's/$/'\''/'
+echo ""

package/.github/hooks/pre-commit

@@ -0,0 +1,30 @@
+#!/bin/bash
+# Blocks commits if email not in allowed list (reads from repo.config.json)
+# If allowed_emails is empty, skip check (user hasn't configured yet)
+
+ROOT="$(git rev-parse --show-toplevel 2>/dev/null)"
+CONFIG="$ROOT/repo.config.json"
+EMAIL=$(git config user.email)
+
+# Read allowed emails from config
+if [[ -f "$CONFIG" ]] && command -v jq &>/dev/null; then
+    ALLOWED=$(jq -r '.allowed_emails[]' "$CONFIG" 2>/dev/null)
+else
+    # No config or jq - skip check
+    exit 0
+fi
+
+# If no emails configured, skip check
+[[ -z "$ALLOWED" ]] && exit 0
+
+echo "$ALLOWED" | grep -qx "$EMAIL" && exit 0
+
+echo ""
+echo "❌ BLOCKED: $EMAIL not allowed"
+echo ""
+echo "Allowed emails (from repo.config.json):"
+echo "$ALLOWED" | sed 's/^/  /'
+echo ""
+echo "Fix: git config user.email '<one of the above>'"
+echo ""
+exit 1

package/.github/hooks/pre-push

@@ -0,0 +1,13 @@
+#!/bin/bash
+# pre-push hook - runs health check before push
+# Blocks push if large files or embedded repos detected
+
+ROOT="$(git rev-parse --show-toplevel 2>/dev/null)"
+HEALTH_SCRIPT="$ROOT/.github/scripts/health-check.sh"
+
+if [[ -x "$HEALTH_SCRIPT" ]]; then
+    "$HEALTH_SCRIPT"
+    exit $?
+fi
+
+exit 0

package/.github/scripts/health-check.sh

@@ -0,0 +1,127 @@
+#!/bin/bash
+# health-check.sh - Git health check before commit/push
+# Checks: large files (>90MB), embedded git repos
+# Run: .github/scripts/health-check.sh [size_mb]
+
+ROOT="$(git rev-parse --show-toplevel 2>/dev/null || pwd)"
+SIZE_MB="${1:-90}"
+LIMIT=$((SIZE_MB * 1024 * 1024))
+
+cd "$ROOT" || exit 1
+
+echo "🏥 Git Health Check: $ROOT"
+echo "==================="
+echo ""
+
+ISSUES=0
+
+# ============================================================================
+# CHECK 1: Large files (>90MB default)
+# ============================================================================
+echo "🔍 Checking for files > ${SIZE_MB}MB..."
+echo ""
+
+echo "=== UNSTAGED/UNTRACKED ==="
+while IFS= read -r line; do
+    [[ -z "$line" ]] && continue
+    file="${line:3}"
+    # Handle renames
+    [[ "$line" == R* ]] && file="${file##* -> }"
+    if [[ -f "$file" ]]; then
+        fsize=$(stat -f%z "$file" 2>/dev/null || stat -c%s "$file" 2>/dev/null || echo "0")
+        if [[ "$fsize" -gt "$LIMIT" ]]; then
+            size_human=$((fsize / 1024 / 1024))
+            echo "  🔴 $file (${size_human}MB)"
+            ISSUES=1
+        fi
+    fi
+done < <(git status --porcelain 2>/dev/null)
+
+echo ""
+echo "=== STAGED ==="
+while IFS= read -r file; do
+    [[ -z "$file" ]] && continue
+    if [[ -f "$file" ]]; then
+        fsize=$(stat -f%z "$file" 2>/dev/null || stat -c%s "$file" 2>/dev/null || echo "0")
+        if [[ "$fsize" -gt "$LIMIT" ]]; then
+            size_human=$((fsize / 1024 / 1024))
+            echo "  🔴 $file (${size_human}MB)"
+            ISSUES=1
+        fi
+    fi
+done < <(git diff --cached --name-only 2>/dev/null)
+
+echo ""
+echo "=== COMMITTED (last 10) ==="
+while IFS= read -r file; do
+    [[ -z "$file" ]] && continue
+    if [[ -f "$file" ]]; then
+        fsize=$(stat -f%z "$file" 2>/dev/null || stat -c%s "$file" 2>/dev/null || echo "0")
+        if [[ "$fsize" -gt "$LIMIT" ]]; then
+            size_human=$((fsize / 1024 / 1024))
+            echo "  🔴 $file (${size_human}MB)"
+            ISSUES=1
+        fi
+    fi
+done < <(git log --oneline -10 --diff-filter=A --name-only --pretty=format:"" 2>/dev/null | sort -u)
+
+if [[ $ISSUES -eq 0 ]]; then
+    echo "  🟢 No large files"
+fi
+
+echo ""
+
+# ============================================================================
+# CHECK 2: Embedded git repos
+# ============================================================================
+echo "🔍 Checking for embedded git repos..."
+echo ""
+
+ROOT_GIT="$ROOT/.git"
+EMBEDDED=()
+
+while IFS= read -r git_dir; do
+    [[ -z "$git_dir" ]] && continue
+    [[ "$git_dir" == "$ROOT_GIT" ]] && continue
+    
+    repo_dir="${git_dir%/.git}"
+    relative="${repo_dir#$ROOT/}"
+    
+    # Check if tracked or not ignored
+    is_tracked=false
+    git ls-files --cached "$relative" 2>/dev/null | grep -q . && is_tracked=true
+    
+    is_ignored=false
+    git check-ignore -q "$relative" 2>/dev/null && is_ignored=true
+    
+    if [[ "$is_tracked" == "true" ]]; then
+        echo "  🔴 $relative (TRACKED - needs removal)"
+        EMBEDDED+=("$relative")
+        ISSUES=1
+    elif [[ "$is_ignored" == "false" ]]; then
+        echo "  🟡 $relative (not ignored - add to .gitignore)"
+        EMBEDDED+=("$relative")
+        ISSUES=1
+    fi
+done < <(find "$ROOT" -type d -name ".git" 2>/dev/null | sort)
+
+if [[ ${#EMBEDDED[@]} -eq 0 ]]; then
+    echo "  🟢 No embedded repos"
+else
+    echo ""
+    echo "Fix: Add to .gitignore:"
+    for repo in "${EMBEDDED[@]}"; do
+        echo "  $repo/"
+    done
+fi
+
+echo ""
+echo "==================="
+
+if [[ $ISSUES -eq 0 ]]; then
+    echo "🟢 All checks passed"
+    exit 0
+else
+    echo "🔴 Issues found - fix before pushing"
+    exit 1
+fi

package/.github/scripts/setup.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+# setup.sh - run after cloning
+# Installs hooks and prompts for email config
+
+ROOT="$(cd "$(dirname "$0")/../.." && pwd)"
+cd "$ROOT"
+
+# 1. Install hooks
+mkdir -p .git/hooks
+cp .github/hooks/* .git/hooks/ 2>/dev/null
+chmod +x .git/hooks/* 2>/dev/null
+echo "✓ Hooks installed"
+
+# 2. Prompt user to set email
+echo ""
+echo "Set your git email:"
+echo "  git config user.email 'github.relock416@passmail.net'  # vdutts"
+echo "  git config user.email 'me@vd7.io'                      # vdutts7"
+echo ""

package/README.md

@@ -1,14 +1,57 @@
-# glidercli
+<div align="center">
 
-Browser automation with autonomous loops. Run tasks until done.
+<img src="https://res.cloudinary.com/ddyc1es5v/image/upload/v1768050242/gh-repos/glidercli/code.png" alt="logo" width="80" height="80" />
+<img src="https://res.cloudinary.com/ddyc1es5v/image/upload/v1768050244/gh-repos/glidercli/github.png" alt="logo" width="80" height="80" />
+
+<h1 align="center">glidercli</h1>
+<p align="center"><i><b>Browser automation CLI with autonomous loop execution.</b></i></p>
+
+[![Github][github]][github-url]
+[![npm][npm]][npm-url]
+
+<img src="https://res.cloudinary.com/ddyc1es5v/image/upload/v1768050244/gh-repos/glidercli/social-preview.png" />
+
+</div>
+
+<br/>
+
+## Table of Contents
+
+<ol>
+    <a href="#about">📝 About</a><br/>
+    <a href="#install">💻 Install</a><br/>
+    <a href="#usage">🚀 Usage</a><br/>
+    <a href="#the-loop">🔄 The Loop</a><br/>
+    <a href="#task-files">📄 Task Files</a><br/>
+    <a href="#commands">⚡ Commands</a><br/>
+    <a href="#tools-used">🔧 Tools used</a><br/>
+    <a href="#contact">👤 Contact</a>
+</ol>
+
+<br/>
+
+## 📝About
+
+Control Chrome from terminal. Run YAML tasks. Loop until complete (Ralph Wiggum pattern).
+
+- **CDP-based** - Direct Chrome DevTools Protocol control
+- **YAML tasks** - Define automation steps declaratively  
+- **Autonomous loops** - Run until completion marker found
+- **Safety guards** - Max iterations, timeout, exponential backoff
+
+## 💻Install
 
 ```bash
 npm i -g glidercli
 ```
 
-## What it does
+### Requirements
 
-Control Chrome from terminal. Run YAML tasks. Loop until complete (Ralph Wiggum pattern).
+- Node 18+
+- Chrome with Glider extension
+- bserve relay server
+
+## 🚀Usage
 
 ```bash
 glider status                    # check connection
@@ -18,7 +61,7 @@ glider run task.yaml             # execute task file
 glider loop task.yaml -n 50      # autonomous loop
 ```
 
-## The Loop
+## 🔄The Loop
 
 The `loop` command runs your task repeatedly until:
 - Completion marker found (`LOOP_COMPLETE` or `DONE`)
@@ -31,7 +74,7 @@ glider loop scrape-feed.yaml -n 100 -t 3600
 
 Safety: max iterations, timeout, exponential backoff on errors, state persistence.
 
-## Task Files
+## 📄Task Files
 
 ```yaml
 name: "Get timeline"
@@ -42,7 +85,7 @@ steps:
   - screenshot: "/tmp/timeline.png"
 ```
 
-## Commands
+## ⚡Commands
 
 | Command | What |
 |---------|------|
@@ -56,22 +99,26 @@ steps:
 | `glider run <file>` | Run YAML task |
 | `glider loop <file>` | Autonomous loop |
 
-## Requirements
-
-- Node 18+
-- Chrome with Glider extension
-- bserve relay server
-
-## Install
-
-```bash
-npm i -g glidercli
-# or
-npm i -g @vd7/glider
-```
-
-Both install the `glider` command.
-
-## License
-
-MIT
+## 🔧Tools Used
+
+[![Node.js][nodejs-badge]][nodejs-url]
+[![Chrome DevTools Protocol][cdp-badge]][cdp-url]
+
+## 👤Contact
+
+[![Email][email]][email-url]
+[![Twitter][twitter]][twitter-url]
+
+<!-- BADGES -->
+[github]: https://img.shields.io/badge/💻_glidercli-000000?style=for-the-badge
+[github-url]: https://github.com/vdutts7/glidercli
+[npm]: https://img.shields.io/badge/npm-glidercli-CB3837?style=for-the-badge&logo=npm
+[npm-url]: https://www.npmjs.com/package/glidercli
+[nodejs-badge]: https://img.shields.io/badge/Node.js-339933?style=for-the-badge&logo=nodedotjs&logoColor=white
+[nodejs-url]: https://nodejs.org
+[cdp-badge]: https://img.shields.io/badge/Chrome_DevTools_Protocol-4285F4?style=for-the-badge&logo=googlechrome&logoColor=white
+[cdp-url]: https://chromedevtools.github.io/devtools-protocol/
+[email]: https://img.shields.io/badge/Email-000000?style=for-the-badge&logo=Gmail&logoColor=white
+[email-url]: mailto:me@vd7.io
+[twitter]: https://img.shields.io/badge/Twitter-000000?style=for-the-badge&logo=Twitter&logoColor=white
+[twitter-url]: https://twitter.com/vaboratory

package/bin/glider.js

@@ -41,9 +41,28 @@ const RED = '\x1b[31m';
 const GREEN = '\x1b[32m';
 const YELLOW = '\x1b[33m';
 const BLUE = '\x1b[34m';
+const MAGENTA = '\x1b[35m';
 const CYAN = '\x1b[36m';
+const WHITE = '\x1b[37m';
+const BOLD = '\x1b[1m';
+const DIM = '\x1b[2m';
 const NC = '\x1b[0m';
 
+// Banner - ASCII art with gradient colors
+const BANNER = `
+${CYAN}   ________    ${MAGENTA}________  ${BLUE}__________ ${NC}
+${CYAN}  / ____/ /   ${MAGENTA}/  _/ __ \\${BLUE}/ ____/ __ \\${NC}
+${CYAN} / / __/ /    ${MAGENTA}/ // / / /${BLUE} __/ / /_/ /${NC}
+${CYAN}/ /_/ / /____${MAGENTA}/ // /_/ /${BLUE} /___/ _, _/ ${NC}
+${CYAN}\\____/_____/${MAGENTA}___/_____/${BLUE}_____/_/ |_|  ${NC}
+${DIM}        Browser Automation CLI v${require('../package.json').version}${NC}
+${DIM}        github.com/vdutts7/glidercli${NC}
+`;
+
+function showBanner() {
+  console.log(BANNER);
+}
+
 const log = {
   ok: (msg) => console.error(`${GREEN}✓${NC} ${msg}`),
   fail: (msg) => console.error(`${RED}✗${NC} ${msg}`),
@@ -134,8 +153,9 @@ async function getTargets() {
 
 // Commands
 async function cmdStatus() {
+  showBanner();
   console.log('═══════════════════════════════════════');
-  console.log('  GLIDER STATUS');
+  console.log('  STATUS');
   console.log('═══════════════════════════════════════');
   
   const serverOk = await checkServer();
@@ -611,9 +631,8 @@ async function cmdLoop(taskFileOrPrompt, options = {}) {
 
 // Help
 function showHelp() {
+  showBanner();
   console.log(`
-${CYAN}GLIDER${NC} - Browser Automation CLI with Autonomous Loop Execution
-
 ${YELLOW}USAGE:${NC}
     glider <command> [args]
 

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "glidercli",
-  "version": "0.1.2",
+  "version": "0.1.3",
   "description": "Browser automation CLI with autonomous loop execution. Control Chrome via CDP, run YAML task files, execute in Ralph Wiggum loops.",
   "main": "index.js",
   "bin": {

package/repo.config.json

@@ -0,0 +1,31 @@
+{
+  "repo": {
+    "name": "glidercli",
+    "description": "Browser automation CLI with autonomous loop execution",
+    "homepage": "https://npmjs.com/package/glidercli",
+    "topics": ["ralph", "claude", "claude-code", "autonomous-agents", "browser-automation", "cdp", "chrome-devtools", "ralph-wiggum"]
+  },
+  "owner": {
+    "github_username": "vdutts7",
+    "website": "https://vd7.io",
+    "twitter": "vaboratory"
+  },
+  "allowed_emails": [
+    "github.relock416@passmail.net",
+    "me@vd7.io"
+  ],
+  "social_preview": {
+    "title": "glidercli",
+    "icons_dir": "assets/icons",
+    "icon_creator": "https://vd7.dev/icon-creator",
+    "dimensions": {
+      "width": 1280,
+      "height": 640
+    }
+  },
+  "npm": {
+    "package_name": "glidercli",
+    "alt_package": "@vd7/glider",
+    "bin_command": "glider"
+  }
+}