fsevents 1.0.6 → 1.0.7

package/node_modules/bl/node_modules/readable-stream/lib/_stream_transform.js

@@ -1,197 +0,0 @@
-// a transform stream is a readable/writable stream where you do
-// something with the data.  Sometimes it's called a "filter",
-// but that's not a great name for it, since that implies a thing where
-// some bits pass through, and others are simply ignored.  (That would
-// be a valid example of a transform, of course.)
-//
-// While the output is causally related to the input, it's not a
-// necessarily symmetric or synchronous transformation.  For example,
-// a zlib stream might take multiple plain-text writes(), and then
-// emit a single compressed chunk some time in the future.
-//
-// Here's how this works:
-//
-// The Transform stream has all the aspects of the readable and writable
-// stream classes.  When you write(chunk), that calls _write(chunk,cb)
-// internally, and returns false if there's a lot of pending writes
-// buffered up.  When you call read(), that calls _read(n) until
-// there's enough pending readable data buffered up.
-//
-// In a transform stream, the written data is placed in a buffer.  When
-// _read(n) is called, it transforms the queued up data, calling the
-// buffered _write cb's as it consumes chunks.  If consuming a single
-// written chunk would result in multiple output chunks, then the first
-// outputted bit calls the readcb, and subsequent chunks just go into
-// the read buffer, and will cause it to emit 'readable' if necessary.
-//
-// This way, back-pressure is actually determined by the reading side,
-// since _read has to be called to start processing a new chunk.  However,
-// a pathological inflate type of transform can cause excessive buffering
-// here.  For example, imagine a stream where every byte of input is
-// interpreted as an integer from 0-255, and then results in that many
-// bytes of output.  Writing the 4 bytes {ff,ff,ff,ff} would result in
-// 1kb of data being output.  In this case, you could write a very small
-// amount of input, and end up with a very large amount of output.  In
-// such a pathological inflating mechanism, there'd be no way to tell
-// the system to stop doing the transform.  A single 4MB write could
-// cause the system to run out of memory.
-//
-// However, even in such a pathological case, only a single written chunk
-// would be consumed, and then the rest would wait (un-transformed) until
-// the results of the previous transformed chunk were consumed.
-
-'use strict';
-
-module.exports = Transform;
-
-var Duplex = require('./_stream_duplex');
-
-/*<replacement>*/
-var util = require('core-util-is');
-util.inherits = require('inherits');
-/*</replacement>*/
-
-util.inherits(Transform, Duplex);
-
-
-function TransformState(stream) {
-  this.afterTransform = function(er, data) {
-    return afterTransform(stream, er, data);
-  };
-
-  this.needTransform = false;
-  this.transforming = false;
-  this.writecb = null;
-  this.writechunk = null;
-}
-
-function afterTransform(stream, er, data) {
-  var ts = stream._transformState;
-  ts.transforming = false;
-
-  var cb = ts.writecb;
-
-  if (!cb)
-    return stream.emit('error', new Error('no writecb in Transform class'));
-
-  ts.writechunk = null;
-  ts.writecb = null;
-
-  if (data !== null && data !== undefined)
-    stream.push(data);
-
-  if (cb)
-    cb(er);
-
-  var rs = stream._readableState;
-  rs.reading = false;
-  if (rs.needReadable || rs.length < rs.highWaterMark) {
-    stream._read(rs.highWaterMark);
-  }
-}
-
-
-function Transform(options) {
-  if (!(this instanceof Transform))
-    return new Transform(options);
-
-  Duplex.call(this, options);
-
-  this._transformState = new TransformState(this);
-
-  // when the writable side finishes, then flush out anything remaining.
-  var stream = this;
-
-  // start out asking for a readable event once data is transformed.
-  this._readableState.needReadable = true;
-
-  // we have implemented the _read method, and done the other things
-  // that Readable wants before the first _read call, so unset the
-  // sync guard flag.
-  this._readableState.sync = false;
-
-  if (options) {
-    if (typeof options.transform === 'function')
-      this._transform = options.transform;
-
-    if (typeof options.flush === 'function')
-      this._flush = options.flush;
-  }
-
-  this.once('prefinish', function() {
-    if (typeof this._flush === 'function')
-      this._flush(function(er) {
-        done(stream, er);
-      });
-    else
-      done(stream);
-  });
-}
-
-Transform.prototype.push = function(chunk, encoding) {
-  this._transformState.needTransform = false;
-  return Duplex.prototype.push.call(this, chunk, encoding);
-};
-
-// This is the part where you do stuff!
-// override this function in implementation classes.
-// 'chunk' is an input chunk.
-//
-// Call `push(newChunk)` to pass along transformed output
-// to the readable side.  You may call 'push' zero or more times.
-//
-// Call `cb(err)` when you are done with this chunk.  If you pass
-// an error, then that'll put the hurt on the whole operation.  If you
-// never call cb(), then you'll never get another chunk.
-Transform.prototype._transform = function(chunk, encoding, cb) {
-  throw new Error('not implemented');
-};
-
-Transform.prototype._write = function(chunk, encoding, cb) {
-  var ts = this._transformState;
-  ts.writecb = cb;
-  ts.writechunk = chunk;
-  ts.writeencoding = encoding;
-  if (!ts.transforming) {
-    var rs = this._readableState;
-    if (ts.needTransform ||
-        rs.needReadable ||
-        rs.length < rs.highWaterMark)
-      this._read(rs.highWaterMark);
-  }
-};
-
-// Doesn't matter what the args are here.
-// _transform does all the work.
-// That we got here means that the readable side wants more data.
-Transform.prototype._read = function(n) {
-  var ts = this._transformState;
-
-  if (ts.writechunk !== null && ts.writecb && !ts.transforming) {
-    ts.transforming = true;
-    this._transform(ts.writechunk, ts.writeencoding, ts.afterTransform);
-  } else {
-    // mark that we need a transform, so that any data that comes in
-    // will get processed, now that we've asked for it.
-    ts.needTransform = true;
-  }
-};
-
-
-function done(stream, er) {
-  if (er)
-    return stream.emit('error', er);
-
-  // if there's nothing in the write buffer, then that means
-  // that nothing more will ever be provided
-  var ws = stream._writableState;
-  var ts = stream._transformState;
-
-  if (ws.length)
-    throw new Error('calling transform done when ws.length != 0');
-
-  if (ts.transforming)
-    throw new Error('calling transform done when still transforming');
-
-  return stream.push(null);
-}