fsevents 1.0.12 → 1.0.14

package/node_modules/rimraf/rimraf.js

@@ -61,7 +61,7 @@ function rimraf (p, options, cb) {
   if (options.disableGlob || !glob.hasMagic(p))
     return afterGlob(null, [p])
 
-  fs.lstat(p, function (er, stat) {
+  options.lstat(p, function (er, stat) {
     if (!er)
       return afterGlob(null, [p])
 
@@ -135,6 +135,10 @@ function rimraf_ (p, options, cb) {
     if (er && er.code === "ENOENT")
       return cb(null)
 
+    // Windows can EPERM on stat.  Life is suffering.
+    if (er && er.code === "EPERM" && isWindows)
+      fixWinEPERM(p, options, er, cb)
+
     if (st && st.isDirectory())
       return rmdir(p, options, er, cb)
 
@@ -269,7 +273,7 @@ function rimrafSync (p, options) {
     results = [p]
   } else {
     try {
-      fs.lstatSync(p)
+      options.lstatSync(p)
       results = [p]
     } catch (er) {
       results = glob.sync(p, options.glob)
@@ -287,6 +291,10 @@ function rimrafSync (p, options) {
     } catch (er) {
       if (er.code === "ENOENT")
         return
+
+      // Windows can EPERM on stat.  Life is suffering.
+      if (er.code === "EPERM" && isWindows)
+        fixWinEPERMSync(p, options, er)
     }
 
     try {

package/node_modules/semver/README.md

@@ -16,18 +16,35 @@ As a command-line utility:
 
     $ semver -h
 
-    Usage: semver <version> [<version> [...]] [-r <range> | -i <inc> | --preid <identifier> | -l | -rv]
-    Test if version(s) satisfy the supplied range(s), and sort them.
+    SemVer 5.1.0
 
-    Multiple versions or ranges may be supplied, unless increment
-    option is specified.  In that case, only a single version may
-    be used, and it is incremented by the specified level
+    A JavaScript implementation of the http://semver.org/ specification
+    Copyright Isaac Z. Schlueter
+
+    Usage: semver [options] <version> [<version> [...]]
+    Prints valid versions sorted by SemVer precedence
+
+    Options:
+    -r --range <range>
+            Print versions that match the specified range.
+
+    -i --increment [<level>]
+            Increment a version by the specified level.  Level can
+            be one of: major, minor, patch, premajor, preminor,
+            prepatch, or prerelease.  Default level is 'patch'.
+            Only one version may be specified.
+
+    --preid <identifier>
+            Identifier to be used to prefix premajor, preminor,
+            prepatch or prerelease version increments.
+
+    -l --loose
+            Interpret versions and ranges loosely
 
     Program exits successfully if any valid version satisfies
     all supplied ranges, and prints all satisfying versions.
 
-    If no versions are valid, or ranges are not satisfied,
-    then exits failure.
+    If no satisfying versions are found, then exits failure.
 
     Versions are printed in ascending order, so supplying
     multiple versions to the utility will just sort them.
@@ -242,7 +259,7 @@ simple     ::= primitive | partial | tilde | caret
 primitive  ::= ( '<' | '>' | '>=' | '<=' | '=' | ) partial
 partial    ::= xr ( '.' xr ( '.' xr qualifier ? )? )?
 xr         ::= 'x' | 'X' | '*' | nr
-nr         ::= '0' | ['1'-'9']['0'-'9']+
+nr         ::= '0' | ['1'-'9'] ( ['0'-'9'] ) *
 tilde      ::= '~' partial
 caret      ::= '^' partial
 qualifier  ::= ( '-' pre )? ( '+' build )?
@@ -272,6 +289,8 @@ strings that they parse.
     same as `prepatch`. It increments the patch version, then makes a
     prerelease. If the input version is already a prerelease it simply
     increments it.
+* `prerelease(v)`: Returns an array of prerelease components, or null
+  if none exist. Example: `prerelease('1.2.3-alpha.1') -> ['alpha', 1]`
 * `major(v)`: Return the major version number.
 * `minor(v)`: Return the minor version number.
 * `patch(v)`: Return the patch version number.

package/node_modules/semver/package.json

@@ -1,20 +1,42 @@
 {
-  "_from": "semver@~5.1.0",
-  "_id": "semver@5.1.0",
+  "_args": [
+    [
+      "semver@~5.2.0",
+      "/Users/eshanker/Code/fsevents/node_modules/node-pre-gyp"
+    ]
+  ],
+  "_from": "semver@>=5.2.0 <5.3.0",
+  "_id": "semver@5.2.0",
+  "_inCache": true,
+  "_installable": true,
   "_location": "/semver",
-  "_nodeVersion": "4.0.0",
+  "_nodeVersion": "4.4.4",
+  "_npmOperationalInternal": {
+    "host": "packages-12-west.internal.npmjs.com",
+    "tmp": "tmp/semver-5.2.0.tgz_1467136841238_0.2250258030835539"
+  },
   "_npmUser": {
     "email": "i@izs.me",
     "name": "isaacs"
   },
-  "_npmVersion": "3.3.2",
+  "_npmVersion": "3.10.2",
   "_phantomChildren": {},
+  "_requested": {
+    "name": "semver",
+    "raw": "semver@~5.2.0",
+    "rawSpec": "~5.2.0",
+    "scope": null,
+    "spec": ">=5.2.0 <5.3.0",
+    "type": "range"
+  },
   "_requiredBy": [
     "/node-pre-gyp"
   ],
-  "_resolved": "https://registry.npmjs.org/semver/-/semver-5.1.0.tgz",
-  "_shasum": "85f2cf8550465c4df000cf7d86f6b054106ab9e5",
+  "_resolved": "https://registry.npmjs.org/semver/-/semver-5.2.0.tgz",
+  "_shasum": "281995b80c1448209415ddbc4cf50c269cef55c5",
   "_shrinkwrap": null,
+  "_spec": "semver@~5.2.0",
+  "_where": "/Users/eshanker/Code/fsevents/node_modules/node-pre-gyp",
   "bin": {
     "semver": "./bin/semver"
   },
@@ -28,10 +50,15 @@
   },
   "directories": {},
   "dist": {
-    "shasum": "85f2cf8550465c4df000cf7d86f6b054106ab9e5",
-    "tarball": "http://registry.npmjs.org/semver/-/semver-5.1.0.tgz"
+    "shasum": "281995b80c1448209415ddbc4cf50c269cef55c5",
+    "tarball": "https://registry.npmjs.org/semver/-/semver-5.2.0.tgz"
   },
-  "gitHead": "8e33a30e62e40e4983d1c5f55e794331b861aadc",
+  "files": [
+    "bin",
+    "range.bnf",
+    "semver.js"
+  ],
+  "gitHead": "f7fef36765c53ebe237bf415c3ea002f24aa5621",
   "homepage": "https://github.com/npm/node-semver#readme",
   "license": "ISC",
   "main": "semver.js",
@@ -47,8 +74,7 @@
   ],
   "name": "semver",
   "optionalDependencies": {},
-  "readme": "semver(1) -- The semantic versioner for npm\n===========================================\n\n## Usage\n\n    $ npm install semver\n\n    semver.valid('1.2.3') // '1.2.3'\n    semver.valid('a.b.c') // null\n    semver.clean('  =v1.2.3   ') // '1.2.3'\n    semver.satisfies('1.2.3', '1.x || >=2.5.0 || 5.0.0 - 7.2.3') // true\n    semver.gt('1.2.3', '9.8.7') // false\n    semver.lt('1.2.3', '9.8.7') // true\n\nAs a command-line utility:\n\n    $ semver -h\n\n    Usage: semver <version> [<version> [...]] [-r <range> | -i <inc> | --preid <identifier> | -l | -rv]\n    Test if version(s) satisfy the supplied range(s), and sort them.\n\n    Multiple versions or ranges may be supplied, unless increment\n    option is specified.  In that case, only a single version may\n    be used, and it is incremented by the specified level\n\n    Program exits successfully if any valid version satisfies\n    all supplied ranges, and prints all satisfying versions.\n\n    If no versions are valid, or ranges are not satisfied,\n    then exits failure.\n\n    Versions are printed in ascending order, so supplying\n    multiple versions to the utility will just sort them.\n\n## Versions\n\nA \"version\" is described by the `v2.0.0` specification found at\n<http://semver.org/>.\n\nA leading `\"=\"` or `\"v\"` character is stripped off and ignored.\n\n## Ranges\n\nA `version range` is a set of `comparators` which specify versions\nthat satisfy the range.\n\nA `comparator` is composed of an `operator` and a `version`.  The set\nof primitive `operators` is:\n\n* `<` Less than\n* `<=` Less than or equal to\n* `>` Greater than\n* `>=` Greater than or equal to\n* `=` Equal.  If no operator is specified, then equality is assumed,\n  so this operator is optional, but MAY be included.\n\nFor example, the comparator `>=1.2.7` would match the versions\n`1.2.7`, `1.2.8`, `2.5.3`, and `1.3.9`, but not the versions `1.2.6`\nor `1.1.0`.\n\nComparators can be joined by whitespace to form a `comparator set`,\nwhich is satisfied by the **intersection** of all of the comparators\nit includes.\n\nA range is composed of one or more comparator sets, joined by `||`.  A\nversion matches a range if and only if every comparator in at least\none of the `||`-separated comparator sets is satisfied by the version.\n\nFor example, the range `>=1.2.7 <1.3.0` would match the versions\n`1.2.7`, `1.2.8`, and `1.2.99`, but not the versions `1.2.6`, `1.3.0`,\nor `1.1.0`.\n\nThe range `1.2.7 || >=1.2.9 <2.0.0` would match the versions `1.2.7`,\n`1.2.9`, and `1.4.6`, but not the versions `1.2.8` or `2.0.0`.\n\n### Prerelease Tags\n\nIf a version has a prerelease tag (for example, `1.2.3-alpha.3`) then\nit will only be allowed to satisfy comparator sets if at least one\ncomparator with the same `[major, minor, patch]` tuple also has a\nprerelease tag.\n\nFor example, the range `>1.2.3-alpha.3` would be allowed to match the\nversion `1.2.3-alpha.7`, but it would *not* be satisfied by\n`3.4.5-alpha.9`, even though `3.4.5-alpha.9` is technically \"greater\nthan\" `1.2.3-alpha.3` according to the SemVer sort rules.  The version\nrange only accepts prerelease tags on the `1.2.3` version.  The\nversion `3.4.5` *would* satisfy the range, because it does not have a\nprerelease flag, and `3.4.5` is greater than `1.2.3-alpha.7`.\n\nThe purpose for this behavior is twofold.  First, prerelease versions\nfrequently are updated very quickly, and contain many breaking changes\nthat are (by the author's design) not yet fit for public consumption.\nTherefore, by default, they are excluded from range matching\nsemantics.\n\nSecond, a user who has opted into using a prerelease version has\nclearly indicated the intent to use *that specific* set of\nalpha/beta/rc versions.  By including a prerelease tag in the range,\nthe user is indicating that they are aware of the risk.  However, it\nis still not appropriate to assume that they have opted into taking a\nsimilar risk on the *next* set of prerelease versions.\n\n#### Prerelease Identifiers\n\nThe method `.inc` takes an additional `identifier` string argument that\nwill append the value of the string as a prerelease identifier:\n\n```javascript\n> semver.inc('1.2.3', 'prerelease', 'beta')\n'1.2.4-beta.0'\n```\n\ncommand-line example:\n\n```shell\n$ semver 1.2.3 -i prerelease --preid beta\n1.2.4-beta.0\n```\n\nWhich then can be used to increment further:\n\n```shell\n$ semver 1.2.4-beta.0 -i prerelease\n1.2.4-beta.1\n```\n\n### Advanced Range Syntax\n\nAdvanced range syntax desugars to primitive comparators in\ndeterministic ways.\n\nAdvanced ranges may be combined in the same way as primitive\ncomparators using white space or `||`.\n\n#### Hyphen Ranges `X.Y.Z - A.B.C`\n\nSpecifies an inclusive set.\n\n* `1.2.3 - 2.3.4` := `>=1.2.3 <=2.3.4`\n\nIf a partial version is provided as the first version in the inclusive\nrange, then the missing pieces are replaced with zeroes.\n\n* `1.2 - 2.3.4` := `>=1.2.0 <=2.3.4`\n\nIf a partial version is provided as the second version in the\ninclusive range, then all versions that start with the supplied parts\nof the tuple are accepted, but nothing that would be greater than the\nprovided tuple parts.\n\n* `1.2.3 - 2.3` := `>=1.2.3 <2.4.0`\n* `1.2.3 - 2` := `>=1.2.3 <3.0.0`\n\n#### X-Ranges `1.2.x` `1.X` `1.2.*` `*`\n\nAny of `X`, `x`, or `*` may be used to \"stand in\" for one of the\nnumeric values in the `[major, minor, patch]` tuple.\n\n* `*` := `>=0.0.0` (Any version satisfies)\n* `1.x` := `>=1.0.0 <2.0.0` (Matching major version)\n* `1.2.x` := `>=1.2.0 <1.3.0` (Matching major and minor versions)\n\nA partial version range is treated as an X-Range, so the special\ncharacter is in fact optional.\n\n* `\"\"` (empty string) := `*` := `>=0.0.0`\n* `1` := `1.x.x` := `>=1.0.0 <2.0.0`\n* `1.2` := `1.2.x` := `>=1.2.0 <1.3.0`\n\n#### Tilde Ranges `~1.2.3` `~1.2` `~1`\n\nAllows patch-level changes if a minor version is specified on the\ncomparator.  Allows minor-level changes if not.\n\n* `~1.2.3` := `>=1.2.3 <1.(2+1).0` := `>=1.2.3 <1.3.0`\n* `~1.2` := `>=1.2.0 <1.(2+1).0` := `>=1.2.0 <1.3.0` (Same as `1.2.x`)\n* `~1` := `>=1.0.0 <(1+1).0.0` := `>=1.0.0 <2.0.0` (Same as `1.x`)\n* `~0.2.3` := `>=0.2.3 <0.(2+1).0` := `>=0.2.3 <0.3.0`\n* `~0.2` := `>=0.2.0 <0.(2+1).0` := `>=0.2.0 <0.3.0` (Same as `0.2.x`)\n* `~0` := `>=0.0.0 <(0+1).0.0` := `>=0.0.0 <1.0.0` (Same as `0.x`)\n* `~1.2.3-beta.2` := `>=1.2.3-beta.2 <1.3.0` Note that prereleases in\n  the `1.2.3` version will be allowed, if they are greater than or\n  equal to `beta.2`.  So, `1.2.3-beta.4` would be allowed, but\n  `1.2.4-beta.2` would not, because it is a prerelease of a\n  different `[major, minor, patch]` tuple.\n\n#### Caret Ranges `^1.2.3` `^0.2.5` `^0.0.4`\n\nAllows changes that do not modify the left-most non-zero digit in the\n`[major, minor, patch]` tuple.  In other words, this allows patch and\nminor updates for versions `1.0.0` and above, patch updates for\nversions `0.X >=0.1.0`, and *no* updates for versions `0.0.X`.\n\nMany authors treat a `0.x` version as if the `x` were the major\n\"breaking-change\" indicator.\n\nCaret ranges are ideal when an author may make breaking changes\nbetween `0.2.4` and `0.3.0` releases, which is a common practice.\nHowever, it presumes that there will *not* be breaking changes between\n`0.2.4` and `0.2.5`.  It allows for changes that are presumed to be\nadditive (but non-breaking), according to commonly observed practices.\n\n* `^1.2.3` := `>=1.2.3 <2.0.0`\n* `^0.2.3` := `>=0.2.3 <0.3.0`\n* `^0.0.3` := `>=0.0.3 <0.0.4`\n* `^1.2.3-beta.2` := `>=1.2.3-beta.2 <2.0.0` Note that prereleases in\n  the `1.2.3` version will be allowed, if they are greater than or\n  equal to `beta.2`.  So, `1.2.3-beta.4` would be allowed, but\n  `1.2.4-beta.2` would not, because it is a prerelease of a\n  different `[major, minor, patch]` tuple.\n* `^0.0.3-beta` := `>=0.0.3-beta <0.0.4`  Note that prereleases in the\n  `0.0.3` version *only* will be allowed, if they are greater than or\n  equal to `beta`.  So, `0.0.3-pr.2` would be allowed.\n\nWhen parsing caret ranges, a missing `patch` value desugars to the\nnumber `0`, but will allow flexibility within that value, even if the\nmajor and minor versions are both `0`.\n\n* `^1.2.x` := `>=1.2.0 <2.0.0`\n* `^0.0.x` := `>=0.0.0 <0.1.0`\n* `^0.0` := `>=0.0.0 <0.1.0`\n\nA missing `minor` and `patch` values will desugar to zero, but also\nallow flexibility within those values, even if the major version is\nzero.\n\n* `^1.x` := `>=1.0.0 <2.0.0`\n* `^0.x` := `>=0.0.0 <1.0.0`\n\n### Range Grammar\n\nPutting all this together, here is a Backus-Naur grammar for ranges,\nfor the benefit of parser authors:\n\n```bnf\nrange-set  ::= range ( logical-or range ) *\nlogical-or ::= ( ' ' ) * '||' ( ' ' ) *\nrange      ::= hyphen | simple ( ' ' simple ) * | ''\nhyphen     ::= partial ' - ' partial\nsimple     ::= primitive | partial | tilde | caret\nprimitive  ::= ( '<' | '>' | '>=' | '<=' | '=' | ) partial\npartial    ::= xr ( '.' xr ( '.' xr qualifier ? )? )?\nxr         ::= 'x' | 'X' | '*' | nr\nnr         ::= '0' | ['1'-'9']['0'-'9']+\ntilde      ::= '~' partial\ncaret      ::= '^' partial\nqualifier  ::= ( '-' pre )? ( '+' build )?\npre        ::= parts\nbuild      ::= parts\nparts      ::= part ( '.' part ) *\npart       ::= nr | [-0-9A-Za-z]+\n```\n\n## Functions\n\nAll methods and classes take a final `loose` boolean argument that, if\ntrue, will be more forgiving about not-quite-valid semver strings.\nThe resulting output will always be 100% strict, of course.\n\nStrict-mode Comparators and Ranges will be strict about the SemVer\nstrings that they parse.\n\n* `valid(v)`: Return the parsed version, or null if it's not valid.\n* `inc(v, release)`: Return the version incremented by the release\n  type (`major`,   `premajor`, `minor`, `preminor`, `patch`,\n  `prepatch`, or `prerelease`), or null if it's not valid\n  * `premajor` in one call will bump the version up to the next major\n    version and down to a prerelease of that major version.\n    `preminor`, and `prepatch` work the same way.\n  * If called from a non-prerelease version, the `prerelease` will work the\n    same as `prepatch`. It increments the patch version, then makes a\n    prerelease. If the input version is already a prerelease it simply\n    increments it.\n* `major(v)`: Return the major version number.\n* `minor(v)`: Return the minor version number.\n* `patch(v)`: Return the patch version number.\n\n### Comparison\n\n* `gt(v1, v2)`: `v1 > v2`\n* `gte(v1, v2)`: `v1 >= v2`\n* `lt(v1, v2)`: `v1 < v2`\n* `lte(v1, v2)`: `v1 <= v2`\n* `eq(v1, v2)`: `v1 == v2` This is true if they're logically equivalent,\n  even if they're not the exact same string.  You already know how to\n  compare strings.\n* `neq(v1, v2)`: `v1 != v2` The opposite of `eq`.\n* `cmp(v1, comparator, v2)`: Pass in a comparison string, and it'll call\n  the corresponding function above.  `\"===\"` and `\"!==\"` do simple\n  string comparison, but are included for completeness.  Throws if an\n  invalid comparison string is provided.\n* `compare(v1, v2)`: Return `0` if `v1 == v2`, or `1` if `v1` is greater, or `-1` if\n  `v2` is greater.  Sorts in ascending order if passed to `Array.sort()`.\n* `rcompare(v1, v2)`: The reverse of compare.  Sorts an array of versions\n  in descending order when passed to `Array.sort()`.\n* `diff(v1, v2)`: Returns difference between two versions by the release type\n  (`major`, `premajor`, `minor`, `preminor`, `patch`, `prepatch`, or `prerelease`),\n  or null if the versions are the same.\n\n\n### Ranges\n\n* `validRange(range)`: Return the valid range or null if it's not valid\n* `satisfies(version, range)`: Return true if the version satisfies the\n  range.\n* `maxSatisfying(versions, range)`: Return the highest version in the list\n  that satisfies the range, or `null` if none of them do.\n* `gtr(version, range)`: Return `true` if version is greater than all the\n  versions possible in the range.\n* `ltr(version, range)`: Return `true` if version is less than all the\n  versions possible in the range.\n* `outside(version, range, hilo)`: Return true if the version is outside\n  the bounds of the range in either the high or low direction.  The\n  `hilo` argument must be either the string `'>'` or `'<'`.  (This is\n  the function called by `gtr` and `ltr`.)\n\nNote that, since ranges may be non-contiguous, a version might not be\ngreater than a range, less than a range, *or* satisfy a range!  For\nexample, the range `1.2 <1.2.9 || >2.0.0` would have a hole from `1.2.9`\nuntil `2.0.0`, so the version `1.2.10` would not be greater than the\nrange (because `2.0.1` satisfies, which is higher), nor less than the\nrange (since `1.2.8` satisfies, which is lower), and it also does not\nsatisfy the range.\n\nIf you want to know if a version satisfies or does not satisfy a\nrange, use the `satisfies(version, range)` function.\n",
-  "readmeFilename": "README.md",
+  "readme": "ERROR: No README data found!",
   "repository": {
     "type": "git",
     "url": "git+https://github.com/npm/node-semver.git"
@@ -56,5 +82,5 @@
   "scripts": {
     "test": "tap test/*.js"
   },
-  "version": "5.1.0"
+  "version": "5.2.0"
 }

package/node_modules/semver/range.bnf

@@ -6,7 +6,7 @@ simple     ::= primitive | partial | tilde | caret
 primitive  ::= ( '<' | '>' | '>=' | '<=' | '=' | ) partial
 partial    ::= xr ( '.' xr ( '.' xr qualifier ? )? )?
 xr         ::= 'x' | 'X' | '*' | nr
-nr         ::= '0' | ['1'-'9']['0'-'9']+
+nr         ::= '0' | ['1'-'9'] ( ['0'-'9'] ) *
 tilde      ::= '~' partial
 caret      ::= '^' partial
 qualifier  ::= ( '-' pre )? ( '+' build )?

package/node_modules/semver/semver.js

@@ -836,7 +836,7 @@ function replaceTilde(comp, loose) {
     else if (isX(m))
       ret = '>=' + M + '.0.0 <' + (+M + 1) + '.0.0';
     else if (isX(p))
-      // ~1.2 == >=1.2.0- <1.3.0-
+      // ~1.2 == >=1.2.0 <1.3.0
       ret = '>=' + M + '.' + m + '.0 <' + M + '.' + (+m + 1) + '.0';
     else if (pr) {
       debug('replaceTilde pr', pr);
@@ -1186,3 +1186,9 @@ function outside(version, range, hilo, loose) {
   }
   return true;
 }
+
+exports.prerelease = prerelease;
+function prerelease(version, loose) {
+  var parsed = parse(version, loose);
+  return (parsed && parsed.prerelease.length) ? parsed.prerelease : null;
+}

package/node_modules/set-blocking/CHANGELOG.md

@@ -0,0 +1,26 @@
+# Change Log
+
+All notable changes to this project will be documented in this file. See [standard-version](https://github.com/conventional-changelog/standard-version) for commit guidelines.
+
+<a name="2.0.0"></a>
+# [2.0.0](https://github.com/yargs/set-blocking/compare/v1.0.0...v2.0.0) (2016-05-17)
+
+
+### Features
+
+* add an isTTY check ([#3](https://github.com/yargs/set-blocking/issues/3)) ([66ce277](https://github.com/yargs/set-blocking/commit/66ce277))
+
+
+### BREAKING CHANGES
+
+* stdio/stderr will not be set to blocking if isTTY === false
+
+
+
+<a name="1.0.0"></a>
+# 1.0.0 (2016-05-14)
+
+
+### Features
+
+* implemented shim for stream._handle.setBlocking ([6bde0c0](https://github.com/yargs/set-blocking/commit/6bde0c0))

package/node_modules/set-blocking/LICENSE.txt

@@ -0,0 +1,14 @@
+Copyright (c) 2016, Contributors
+
+Permission to use, copy, modify, and/or distribute this software
+for any purpose with or without fee is hereby granted, provided
+that the above copyright notice and this permission notice
+appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE
+LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
+OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

package/node_modules/set-blocking/README.md

@@ -0,0 +1,31 @@
+# set-blocking
+
+[![Build Status](https://travis-ci.org/yargs/set-blocking.svg)](https://travis-ci.org/yargs/set-blocking)
+[![NPM version](https://img.shields.io/npm/v/set-blocking.svg)](https://www.npmjs.com/package/set-blocking)
+[![Coverage Status](https://coveralls.io/repos/yargs/set-blocking/badge.svg?branch=)](https://coveralls.io/r/yargs/set-blocking?branch=master)
+[![Standard Version](https://img.shields.io/badge/release-standard%20version-brightgreen.svg)](https://github.com/conventional-changelog/standard-version)
+
+set blocking `stdio` and `stderr` ensuring that terminal output does not truncate.
+
+```js
+const setBlocking = require('set-blocking')
+setBlocking(true)
+console.log(someLargeStringToOutput)
+```
+
+## Historical Context/Word of Warning
+
+This was created as a shim to address the bug discussed in [node #6456](https://github.com/nodejs/node/issues/6456). This bug crops up on
+newer versions of Node.js (`0.12+`), truncating terminal output.
+
+You should be mindful of the side-effects caused by using `set-blocking`:
+
+* if your module sets blocking to `true`, it will effect other modules
+  consuming your library. In [yargs](https://github.com/yargs/yargs/blob/master/yargs.js#L653) we only call
+  `setBlocking(true)` once we already know we are about to call `process.exit(code)`.
+* this patch will not apply to subprocesses spawned with `isTTY = true`, this is
+  the [default `spawn()` behavior](https://nodejs.org/api/child_process.html#child_process_child_process_spawn_command_args_options).
+
+## License
+
+ISC

package/node_modules/set-blocking/index.js

@@ -0,0 +1,7 @@
+module.exports = function (blocking) {
+  [process.stdout, process.stderr].forEach(function (stream) {
+    if (stream._handle && stream.isTTY && typeof stream._handle.setBlocking === 'function') {
+      stream._handle.setBlocking(blocking)
+    }
+  })
+}

package/node_modules/set-blocking/package.json

@@ -0,0 +1,98 @@
+{
+  "_args": [
+    [
+      "set-blocking@~2.0.0",
+      "/Users/eshanker/Code/fsevents/node_modules/npmlog"
+    ]
+  ],
+  "_from": "set-blocking@>=2.0.0 <2.1.0",
+  "_id": "set-blocking@2.0.0",
+  "_inCache": true,
+  "_installable": true,
+  "_location": "/set-blocking",
+  "_nodeVersion": "0.12.7",
+  "_npmOperationalInternal": {
+    "host": "packages-12-west.internal.npmjs.com",
+    "tmp": "tmp/set-blocking-2.0.0.tgz_1463525966987_0.5456729622092098"
+  },
+  "_npmUser": {
+    "email": "ben@npmjs.com",
+    "name": "bcoe"
+  },
+  "_npmVersion": "2.11.3",
+  "_phantomChildren": {},
+  "_requested": {
+    "name": "set-blocking",
+    "raw": "set-blocking@~2.0.0",
+    "rawSpec": "~2.0.0",
+    "scope": null,
+    "spec": ">=2.0.0 <2.1.0",
+    "type": "range"
+  },
+  "_requiredBy": [
+    "/npmlog"
+  ],
+  "_resolved": "https://registry.npmjs.org/set-blocking/-/set-blocking-2.0.0.tgz",
+  "_shasum": "045f9782d011ae9a6803ddd382b24392b3d890f7",
+  "_shrinkwrap": null,
+  "_spec": "set-blocking@~2.0.0",
+  "_where": "/Users/eshanker/Code/fsevents/node_modules/npmlog",
+  "author": {
+    "email": "ben@npmjs.com",
+    "name": "Ben Coe"
+  },
+  "bugs": {
+    "url": "https://github.com/yargs/set-blocking/issues"
+  },
+  "dependencies": {},
+  "description": "set blocking stdio and stderr ensuring that terminal output does not truncate",
+  "devDependencies": {
+    "chai": "^3.5.0",
+    "coveralls": "^2.11.9",
+    "mocha": "^2.4.5",
+    "nyc": "^6.4.4",
+    "standard": "^7.0.1",
+    "standard-version": "^2.2.1"
+  },
+  "directories": {},
+  "dist": {
+    "shasum": "045f9782d011ae9a6803ddd382b24392b3d890f7",
+    "tarball": "https://registry.npmjs.org/set-blocking/-/set-blocking-2.0.0.tgz"
+  },
+  "files": [
+    "LICENSE.txt",
+    "index.js"
+  ],
+  "gitHead": "7eec10577b5fff264de477ba3b9d07f404946eff",
+  "homepage": "https://github.com/yargs/set-blocking#readme",
+  "keywords": [
+    "blocking",
+    "flush",
+    "shim",
+    "stderr",
+    "stdio",
+    "terminal"
+  ],
+  "license": "ISC",
+  "main": "index.js",
+  "maintainers": [
+    {
+      "name": "bcoe",
+      "email": "ben@npmjs.com"
+    }
+  ],
+  "name": "set-blocking",
+  "optionalDependencies": {},
+  "readme": "ERROR: No README data found!",
+  "repository": {
+    "type": "git",
+    "url": "git+https://github.com/yargs/set-blocking.git"
+  },
+  "scripts": {
+    "coverage": "nyc report --reporter=text-lcov | coveralls",
+    "pretest": "standard",
+    "test": "nyc mocha ./test/*.js",
+    "version": "standard-version"
+  },
+  "version": "2.0.0"
+}

package/node_modules/signal-exit/CHANGELOG.md

@@ -0,0 +1,17 @@
+# Change Log
+
+All notable changes to this project will be documented in this file. See [standard-version](https://github.com/conventional-changelog/standard-version) for commit guidelines.
+
+<a name="3.0.0"></a>
+# [3.0.0](https://github.com/tapjs/signal-exit/compare/v2.1.2...v3.0.0) (2016-06-13)
+
+
+### Bug Fixes
+
+* get our test suite running on Windows ([#23](https://github.com/tapjs/signal-exit/issues/23)) ([6f3eda8](https://github.com/tapjs/signal-exit/commit/6f3eda8))
+* hooking SIGPROF was interfering with profilers see [#21](https://github.com/tapjs/signal-exit/issues/21) ([#24](https://github.com/tapjs/signal-exit/issues/24)) ([1248a4c](https://github.com/tapjs/signal-exit/commit/1248a4c))
+
+
+### BREAKING CHANGES
+
+* signal-exit no longer wires into SIGPROF

package/node_modules/signal-exit/LICENSE.txt

@@ -0,0 +1,14 @@
+Copyright (c) 2015, Contributors
+
+Permission to use, copy, modify, and/or distribute this software
+for any purpose with or without fee is hereby granted, provided
+that the above copyright notice and this permission notice
+appear in all copies.
+
+THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE
+LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
+OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

package/node_modules/signal-exit/README.md

@@ -0,0 +1,40 @@
+# signal-exit
+
+[![Build Status](https://travis-ci.org/tapjs/signal-exit.png)](https://travis-ci.org/tapjs/signal-exit)
+[![Coverage](https://coveralls.io/repos/tapjs/signal-exit/badge.svg?branch=master)](https://coveralls.io/r/tapjs/signal-exit?branch=master)
+[![NPM version](https://img.shields.io/npm/v/signal-exit.svg)](https://www.npmjs.com/package/signal-exit)
+[![Windows Tests](https://img.shields.io/appveyor/ci/bcoe/signal-exit/master.svg?label=Windows%20Tests)](https://ci.appveyor.com/project/bcoe/signal-exit)
+[![Standard Version](https://img.shields.io/badge/release-standard%20version-brightgreen.svg)](https://github.com/conventional-changelog/standard-version)
+
+When you want to fire an event no matter how a process exits:
+
+* reaching the end of execution.
+* explicitly having `process.exit(code)` called.
+* having `process.kill(pid, sig)` called.
+* receiving a fatal signal from outside the process
+
+Use `signal-exit`.
+
+```js
+var onExit = require('signal-exit')
+
+onExit(function (code, signal) {
+  console.log('process exited!')
+})
+```
+
+## API
+
+`var remove = onExit(function (code, signal) {}, options)`
+
+The return value of the function is a function that will remove the
+handler.
+
+Note that the function *only* fires for signals if the signal would
+cause the proces to exit.  That is, there are no other listeners, and
+it is a fatal signal.
+
+## Options
+
+* `alwaysLast`: Run this handler after any other signal or exit
+  handlers.  This causes `process.emit` to be monkeypatched.

package/node_modules/signal-exit/index.js

@@ -0,0 +1,148 @@
+// Note: since nyc uses this module to output coverage, any lines
+// that are in the direct sync flow of nyc's outputCoverage are
+// ignored, since we can never get coverage for them.
+var assert = require('assert')
+var signals = require('./signals.js')
+
+var EE = require('events')
+/* istanbul ignore if */
+if (typeof EE !== 'function') {
+  EE = EE.EventEmitter
+}
+
+var emitter
+if (process.__signal_exit_emitter__) {
+  emitter = process.__signal_exit_emitter__
+} else {
+  emitter = process.__signal_exit_emitter__ = new EE()
+  emitter.count = 0
+  emitter.emitted = {}
+}
+
+module.exports = function (cb, opts) {
+  assert.equal(typeof cb, 'function', 'a callback must be provided for exit handler')
+
+  if (loaded === false) {
+    load()
+  }
+
+  var ev = 'exit'
+  if (opts && opts.alwaysLast) {
+    ev = 'afterexit'
+  }
+
+  var remove = function () {
+    emitter.removeListener(ev, cb)
+    if (emitter.listeners('exit').length === 0 &&
+        emitter.listeners('afterexit').length === 0) {
+      unload()
+    }
+  }
+  emitter.on(ev, cb)
+
+  return remove
+}
+
+module.exports.unload = unload
+function unload () {
+  if (!loaded) {
+    return
+  }
+  loaded = false
+
+  signals.forEach(function (sig) {
+    try {
+      process.removeListener(sig, sigListeners[sig])
+    } catch (er) {}
+  })
+  process.emit = originalProcessEmit
+  process.reallyExit = originalProcessReallyExit
+  emitter.count -= 1
+}
+
+function emit (event, code, signal) {
+  if (emitter.emitted[event]) {
+    return
+  }
+  emitter.emitted[event] = true
+  emitter.emit(event, code, signal)
+}
+
+// { <signal>: <listener fn>, ... }
+var sigListeners = {}
+signals.forEach(function (sig) {
+  sigListeners[sig] = function listener () {
+    // If there are no other listeners, an exit is coming!
+    // Simplest way: remove us and then re-send the signal.
+    // We know that this will kill the process, so we can
+    // safely emit now.
+    var listeners = process.listeners(sig)
+    if (listeners.length === emitter.count) {
+      unload()
+      emit('exit', null, sig)
+      /* istanbul ignore next */
+      emit('afterexit', null, sig)
+      /* istanbul ignore next */
+      process.kill(process.pid, sig)
+    }
+  }
+})
+
+module.exports.signals = function () {
+  return signals
+}
+
+module.exports.load = load
+
+var loaded = false
+
+function load () {
+  if (loaded) {
+    return
+  }
+  loaded = true
+
+  // This is the number of onSignalExit's that are in play.
+  // It's important so that we can count the correct number of
+  // listeners on signals, and don't wait for the other one to
+  // handle it instead of us.
+  emitter.count += 1
+
+  signals = signals.filter(function (sig) {
+    try {
+      process.on(sig, sigListeners[sig])
+      return true
+    } catch (er) {
+      return false
+    }
+  })
+
+  process.emit = processEmit
+  process.reallyExit = processReallyExit
+}
+
+var originalProcessReallyExit = process.reallyExit
+function processReallyExit (code) {
+  process.exitCode = code || 0
+  emit('exit', process.exitCode, null)
+  /* istanbul ignore next */
+  emit('afterexit', process.exitCode, null)
+  /* istanbul ignore next */
+  originalProcessReallyExit.call(process, process.exitCode)
+}
+
+var originalProcessEmit = process.emit
+function processEmit (ev, arg) {
+  if (ev === 'exit') {
+    if (arg !== undefined) {
+      process.exitCode = arg
+    }
+    var ret = originalProcessEmit.apply(this, arguments)
+    emit('exit', process.exitCode, null)
+    /* istanbul ignore next */
+    emit('afterexit', process.exitCode, null)
+    return ret
+  } else {
+    return originalProcessEmit.apply(this, arguments)
+  }
+}