freeharness 0.4.1 → 0.4.2

package/node_modules/@freeharness/sdd/vendor/openspec/assets/skills/openspec-archive-change/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: openspec-archive-change
-description: Archive a completed change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete.
+description: Archive a completed OpenSpec change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete. Also use when the user says "openspec archive" or "opsx archive".
 allowed-tools: Bash(openspec:*)
 license: MIT
 compatibility: Requires openspec CLI.
@@ -13,6 +13,17 @@ Archive a completed change in the experimental workflow.
 
 **Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
 
+**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.
+
+One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.
+
+Otherwise, with no root, what happens next depends on how this workflow was reached:
+
+- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
+- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.
+
+In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.
+
 `<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve the full path from each delta spec when resolving its main spec.
 
 **Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
@@ -74,16 +85,27 @@ Archive a completed change in the experimental workflow.
 
 3. **Check task completion status**
 
-   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
-
-   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+   Run `openspec list --json` with the same selected-root flags and find the
+   entry in `changes` whose `name` exactly matches the selected change.
+   Require exactly one match and nonnegative integer `totalTasks` and
+   `completedTasks`, with `completedTasks <= totalTasks`. The CLI resolves
+   the schema's tracked task files, including custom artifact names, output
+   paths, and globs.
+   Incomplete tasks = `totalTasks - completedTasks`.
+
+   Do not infer task completion from artifact status or the absence of a
+   top-level `tasks.md`. If the lookup fails, returns invalid JSON, omits or
+   duplicates the selected change, or returns invalid counts, report the problem
+   and stop before syncing or archiving.
+   The CLI counts only `x`/`X` checkbox markers as complete;
+   other markers, including unfamiliar ones, remain incomplete.
 
    **If incomplete tasks found:**
    - Display warning showing count of incomplete tasks
    - Ask the user to confirm they want to proceed
    - Proceed if user confirms
 
-   **If no tasks file exists:** Proceed without task-related warning.
+   **If `totalTasks` is zero:** Proceed without a task-related warning.
 
 4. **Assess delta spec sync state**
 
@@ -94,17 +116,23 @@ Archive a completed change in the experimental workflow.
 
    **If delta specs exist:**
    - Compare each delta spec with its corresponding main spec at `<planningHome.root>/openspec/specs/<capability-path>/spec.md` (use the store-aware `planningHome.root` from step 2, not a hardcoded repo path)
+   - A missing main spec is **not automatically** "already synced". For a new capability, the main spec is an *output* of the sync, not an input:
+     - If the delta has MODIFIED or RENAMED requirements, report that only ADDED requirements can create a new main spec and mark that capability as sync-blocked. Never invent a requirement that has no current version.
+     - Otherwise, if the delta has only REMOVED requirements and the change's `.openspec.yaml` declares `retire_capabilities: true`, the capability is already retired: count it as already synced, warn that there is nothing left to remove, and do not recreate the main spec. Apply this rule both now and when verifying a completed sync.
+     - Otherwise, if the delta has no ADDED requirements, report that no sync is possible and mark that capability as sync-blocked. For a REMOVED-only delta, warn that there is no main spec to remove from and leave the main-spec tree unchanged. `openspec archive` refuses the unmarked REMOVED-only case with `Spec must have at least one requirement`.
+     - Otherwise, count the capability as needing sync and name it in the summary (`<capability-path>: new main spec will be created`). If the delta also has REMOVED requirements, warn that they will be ignored because there is no main spec to remove from. The sync creates the main spec from only the delta's ADDED requirements, exactly as `openspec archive` does.
    - Determine what changes would be applied (adds, modifications, removals, renames)
-   - Show a combined summary before prompting
+   - Continue assessing the remaining capabilities even when one is sync-blocked. Show a combined summary before prompting.
 
    **Prompt options:**
-   - If changes needed: "Sync now (recommended)", "Archive without syncing"
-   - If already synced: "Archive now", "Sync anyway", "Cancel"
+   - If any capability is sync-blocked: explain why and offer only "Archive without syncing", "Cancel"
+   - Otherwise, if changes needed: "Sync now (recommended)", "Archive without syncing"
+   - Otherwise, if already synced: "Archive now", "Sync anyway", "Cancel"
 
    Route on the answer:
    - "Cancel" — stop, do not archive
    - "Archive without syncing" or "Archive now" — proceed to archive
-   - "Sync now" or "Sync anyway" — sync, then verify (below)
+   - "Sync now" or "Sync anyway" — sync, then verify (below). Do not start any sync while a capability is sync-blocked; explain the blocker and repeat the available choices.
    - Anything else — ask again rather than archiving
 
    Before a selected sync writes any main spec, run
@@ -118,10 +146,21 @@ Archive a completed change in the experimental workflow.
 
    Then run the `openspec-sync-specs` workflow inline (agent-driven intelligent merge) for change '<name>', passing the delta spec analysis and the fetched specs-rule snapshot from above, and wait for it to finish. The inline sync must reuse that snapshot without fetching `specs` instructions again. Do not delegate it to a background task — step 5 would move `changeRoot` out from under a sync that is still reading it, leaving the change archived and the main specs never updated. If your agent can only run it by delegation, delegate synchronously and wait for the result.
 
-   Then re-run the comparison from the top of this step against every capability that has a delta spec in `artifactPaths.specs.existingOutputPaths` — not only the ones the sync reports it touched. A successful sync leaves nothing left to apply, so each capability must now read as already synced:
+   If the sync reports any stop or blocking condition, treat the sync as failed.
+   Stop the archive immediately. Do not perform the post-sync content comparison and do not move its `changeRoot`.
+   Nothing has moved, so the user can fix the blocking condition or re-run the sync.
+
+   After the sync writes each main spec, verify its structure against the canonical sync contract:
+   - A new main spec starts with a `# <capability> Specification` title. An existing main spec keeps its title exactly as it is.
+   - Preserve existing `## Purpose` sections completely untouched for established main specs.
+   - For a new main spec, copy the delta `## Purpose` verbatim. Warn only if the purpose text is shorter than standard validation expects. Do not regenerate or rewrite existing authored purpose. If no usable `## Purpose` is provided, use the existing TBD Purpose behavior and warning.
+   - Verify that no delta-style section headers (`## ADDED Requirements`, `## MODIFIED Requirements`, `## REMOVED Requirements`, `## RENAMED Requirements`) remain in the main spec, adhering strictly to the sync workflow formatting rules.
+   - Requirement blocks the sync wrote or changed use `### Requirement:` headings, and their scenarios use `#### Scenario:` headings, under the spec's `## Requirements` section. Leave content the delta does not mention exactly as it is.
+
+   Then re-run the comparison from the top of this step, including the explicitly retired, missing-spec case, against every capability that has a delta spec in `artifactPaths.specs.existingOutputPaths` — not only the ones the sync reports it touched. A successful sync leaves nothing left to apply, so each capability must now read as already synced:
    - ADDED requirements present
    - MODIFIED requirements carrying the scenario and description changes named in the delta, with their other scenarios intact
-   - REMOVED requirements gone — and where this sync retired a capability (removed its last requirement, leaving `## Requirements` empty), its main spec deleted rather than left empty; a spec the sync deliberately kept and reported is also a match
+   - REMOVED requirements gone — and where this sync retired a capability (removed its last requirement, leaving `## Requirements` empty), its main spec deleted rather than left empty.
    - RENAMED requirements present under the new name and absent under the old one
 
    If the sync failed, or any capability does not match, report what differs and stop — do not archive. Nothing has moved and `changeRoot` is intact, so the user can fix the mismatch or re-run the sync and start the archive again.

package/node_modules/@freeharness/sdd/vendor/openspec/assets/skills/openspec-bulk-archive-change/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: openspec-bulk-archive-change
-description: Archive multiple completed changes at once. Use when archiving several parallel changes.
+description: Archive multiple completed OpenSpec changes at once. Use when archiving several parallel changes. Also use for a plural archive request - "openspec bulk-archive", "opsx bulk-archive", "openspec archive all", or "openspec archive these changes".
 allowed-tools: Bash(openspec:*)
 license: MIT
 compatibility: Requires openspec CLI.
@@ -15,6 +15,17 @@ This skill allows you to batch-archive changes, handling spec conflicts intellig
 
 **Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
 
+**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.
+
+One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.
+
+Otherwise, with no root, what happens next depends on how this workflow was reached:
+
+- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
+- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.
+
+In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.
+
 `<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve the full path from each delta spec when resolving its main spec.
 
 **Input**: None required (prompts for selection)
@@ -30,7 +41,7 @@ This skill allows you to batch-archive changes, handling spec conflicts intellig
 2. **Prompt for change selection**
 
    Ask the user to choose changes (multi-select):
-   - Show each change with its schema
+   - Show each change name and task status from the list output
    - Include an option for "All changes"
    - Allow any number of selections (1+ works, 2+ is the typical use case)
 
@@ -63,15 +74,24 @@ This skill allows you to batch-archive changes, handling spec conflicts intellig
 
 3. **Batch validation - gather status for all selected changes**
 
+   Run `openspec list --json` once with the same selected-root flags for task
+   progress. If the lookup fails, returns invalid JSON, or omits any selected
+   change, contains a duplicate selected change, or returns invalid counts,
+   report the problem and stop before syncing or archiving the batch.
+
    For each selected change, collect:
 
    a. **Artifact status** - Run `openspec status --change "<name>" --json`
       - Parse `schemaName`, `artifacts`, `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`
       - Note which artifacts are `done` vs other states
 
-   b. **Task completion** - Read `artifactPaths.tasks.existingOutputPaths` from status JSON
-      - Count `- [ ]` (incomplete) vs `- [x]` (complete)
-      - If no tasks file exists, note as "No tasks"
+   b. **Task completion** - Find the `changes` entry from the list response whose `name` exactly matches this change
+      - Require nonnegative integer `totalTasks` and `completedTasks`, with `completedTasks <= totalTasks`
+      - Incomplete tasks = `totalTasks - completedTasks`
+      - The CLI resolves the schema's tracked task files, including custom artifact names, output paths, and globs
+      - Do not infer task completion from artifact status, an artifact id of `tasks`, or the absence of a top-level `tasks.md`
+      - The CLI counts only `x`/`X` checkbox markers as complete; other markers remain incomplete
+      - If `totalTasks` is zero, note as "No tasks"
 
    c. **Delta specs** - Check `artifactPaths.specs.existingOutputPaths` from status JSON
       - List which capability specs exist
@@ -81,6 +101,14 @@ This skill allows you to batch-archive changes, handling spec conflicts intellig
         lookup for that change; do not infer deltas from unrelated artifacts.
       - Evaluate this independently for every change, including mixed-schema
         batches where some schemas have no `specs` artifact.
+
+   d. **Archive target** - Compute each change's target name once and record it as that change's `<target-name>`
+      - Use the change name as-is when it already starts with a `YYYY-MM-DD-` prefix; otherwise prepend the current date as `YYYY-MM-DD-<name>` (same rule as `openspec archive`)
+      - Check whether `<planningHome.changesDir>/archive/<target-name>` already exists
+      - If it exists, or another selected change resolves to the same target name, mark every such change `Blocked` with `Archive directory already exists`
+      - A blocked change is never synced or moved: show it as `Blocked` in the step 6 table, leave it out of conflict resolution (resolve its conflicts using only the other changes), and record it as Failed in step 8d
+      - Checking here, before any main spec is written, matches `openspec archive`: a collision found after sync would leave main specs rewritten for an archive that never happened
+
 4. **Detect spec conflicts**
 
    Build a map keyed by `<capability-path>`, the exact path relative to `specs/`:
@@ -153,8 +181,8 @@ This skill allows you to batch-archive changes, handling spec conflicts intellig
    Route on the answer by intent, not by exact label — you wrote these labels,
    so match what the user picked rather than the wording above:
    - "Cancel" — stop, do not archive. Report that nothing was archived and skip the remaining steps.
-   - The archive-everything option — proceed with every selected change
-   - The ready-only option — proceed with only the changes the step 6 table marks `Ready` or `Ready*`, and record the rest as Skipped in step 8d. If a `Ready*` change's conflict partner is skipped, re-derive that conflict's resolution using only the changes being archived.
+   - The archive-everything option — proceed with every selected change that is not `Blocked`
+   - The ready-only option — proceed with only the changes the step 6 table marks `Ready` or `Ready*`, and record the rest as Skipped in step 8d, except `Blocked` changes, which stay Failed with `Archive directory already exists`. If a `Ready*` change's conflict partner is skipped, re-derive that conflict's resolution using only the changes being archived.
    - Anything else — ask again rather than archiving
 
    Before step 8 writes the first main spec or moves any change, fetch every
@@ -178,6 +206,8 @@ This skill allows you to batch-archive changes, handling spec conflicts intellig
 
    a. **Sync included delta specs**:
       - Run the `openspec-sync-specs` workflow inline (agent-driven intelligent merge) only for changes with entries in `includedDeltas`, passing only the included delta paths and explicitly instructing it to ignore that change's `excludedDeltas`. Wait for it to finish.
+      - If the sync reports any stop or blocking condition, treat the sync as failed. Stop processing that change immediately. Before continuing to the next change, record this change's outcome as Failed in the batch results, including the sync blocking/error condition.
+      - Do not perform the post-sync content comparison and do not move its `changeRoot`; leave the change intact.
       - For conflicts, apply in resolved order.
       - Pass that change's fetched specs-rule snapshot into inline sync; inline
         sync must reuse it without fetching instructions again
@@ -192,20 +222,27 @@ This skill allows you to batch-archive changes, handling spec conflicts intellig
       - Verify that main specs are updated:
         - ADDED requirements present
         - MODIFIED requirements carrying scenario and description changes named in the delta, with their other scenarios intact
-        - REMOVED requirements gone — and where this sync retired a capability (removed its last requirement, leaving `## Requirements` empty), its main spec deleted rather than left empty; a spec the sync deliberately kept and reported is also a match
+        - REMOVED requirements gone — and where this sync retired a capability (removed its last requirement, leaving `## Requirements` empty), its main spec deleted rather than left empty.
         - RENAMED requirements present under the new name and absent under the old one
       - Do not verify delta specs in `excludedDeltas`; they are intentionally left unsynced.
       - If sync failed or any capability does not match verification, report what differs and fail/skip moving that change's `changeRoot` — do not archive that change. `changeRoot` remains intact.
 
    c. **Perform the archive**:
 
-      Target name: use the change name as-is when it already starts with a `YYYY-MM-DD-` prefix; otherwise prepend the current date as `YYYY-MM-DD-<name>` (same rule as `openspec archive`).
+      Target name: use the `<target-name>` recorded for this change in step 3d, unchanged. Never recompute it here: a batch that runs past midnight would check one date in step 3 and move to another.
+
+      **Check if target already exists:**
+      - Check again immediately before the move, even though step 3 already checked: the target can appear mid-batch
+      - If yes: record this change as Failed with `Archive directory already exists`, leave `changeRoot` where it is, report any main specs step 8a already synced for it, and continue with the remaining changes
+      - If no: move `changeRoot` to the archive directory
 
       ```bash
       mkdir -p "<planningHome.changesDir>/archive"
       mv "<changeRoot>" "<planningHome.changesDir>/archive/<target-name>"
       ```
 
+      **Confirm the move did not nest:** `mv` exits 0 even when the target appeared after the check, moving the change *inside* it. If `<planningHome.changesDir>/archive/<target-name>/<change-directory-name>` now exists (the last path segment of `changeRoot`), move that directory back to `changeRoot` and record this change as Failed with `Archive directory already exists`. Never report it as archived.
+
    d. **Track outcome** for each change:
       - Success: archived successfully
       - Failed: error during archive or spec verification (record error)
@@ -320,8 +357,9 @@ No active changes found. Create a new change to get started.
 - Never archive after the user cancels the confirmation — a cancelled batch archives nothing
 - Track and report all outcomes (success/skip/fail)
 - Preserve .openspec.yaml when moving to archive
-- Archive directory target uses current date: YYYY-MM-DD-<name>; a name that already starts with a `YYYY-MM-DD-` prefix is used as-is (never stack a second date)
+- Archive directory target uses the current date, computed once in step 3d and reused at the move: YYYY-MM-DD-<name>; a name that already starts with a `YYYY-MM-DD-` prefix is used as-is (never stack a second date)
 - If archive target exists, fail that change but continue with others
+- Check every archive target in step 3, before the first main-spec write; a change whose target exists is never synced or moved
 - If sync is requested, run the `openspec-sync-specs` workflow inline (agent-driven) for each change with included delta specs
 - Carry the per-delta `includedDeltas` and `excludedDeltas` decisions into execution; sync and verify only included deltas
 - Report every excluded delta as `sync skipped` without treating the archive itself as skipped

package/node_modules/@freeharness/sdd/vendor/openspec/assets/skills/openspec-continue-change/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: openspec-continue-change
-description: Continue working on an OpenSpec change by creating the next artifact. Use when the user wants to progress their change, create the next artifact, or continue their workflow.
+description: Continue working on an OpenSpec change by creating the next artifact. Use when the user wants to progress their change, create the next artifact, or continue their workflow. Also use when the user says "openspec continue" or "opsx continue".
 allowed-tools: Bash(openspec:*)
 license: MIT
 compatibility: Requires openspec CLI.
@@ -13,6 +13,17 @@ Continue working on a change by creating the next artifact.
 
 **Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
 
+**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.
+
+One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.
+
+Otherwise, with no root, what happens next depends on how this workflow was reached:
+
+- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
+- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.
+
+In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.
+
 **Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
 
 **Steps**
@@ -26,7 +37,6 @@ Continue working on a change by creating the next artifact.
 
    When prompting, present the top 3-4 most recently modified changes as options, showing:
    - Change name
-   - Schema (from `schema` field if present, otherwise "spec-driven")
    - Status (e.g., "0/5 tasks", "complete", "no tasks")
    - How recently it was modified (from `lastModified` field)
 
@@ -48,6 +58,13 @@ Continue working on a change by creating the next artifact.
 
    ---
 
+   **Before anything else, finish a partly written artifact**:
+   - An artifact whose output is a glob pattern (e.g. `specs/**/*.md`) reads `done` as soon as one matching file exists, so a run interrupted while writing its files leaves it `done` with some still missing
+   - For each such `done` artifact, first get its instructions and read any completed dependencies needed to determine the expected files. Then compare those files with `artifactPaths.<id>.existingOutputPaths`. For spec-driven's `specs`, read the proposal and check for one `specs/<capability-path>/spec.md` per capability it lists; resolve each expected path against `changeRoot` before comparing path identity, and verify each one remains inside `changeRoot` after resolving symlinks, both in its parent directories and in the file itself if it already exists
+   - Never write an expected path that fails that check; stop and tell the user. If any are missing, write only the missing files, each at its checked path - when the `instruction` field delegates creation to a skill or command, invoke it only if it can write each file to its checked path; otherwise stop and tell the user - and STOP - that counts as this invocation's ONE artifact. If you cannot tell whether a file was left out on purpose, ask the user
+
+   ---
+
    **If all planning artifacts are complete (`isPlanningComplete: true`, or legacy `isComplete: true`)**:
    - Congratulate the user
    - Show final status including the schema used
@@ -72,10 +89,13 @@ Continue working on a change by creating the next artifact.
      - `skipped`/`warning`: present when the change declares skip_specs and this artifact must NOT be created - pick another artifact
    - **Create the artifact file**:
      - Read any completed dependency files for context - always re-read them from disk, even if you saw them earlier in the conversation (the user may have edited them)
-     - If the `instruction` field delegates creation to a specific skill or command, invoke it to produce the artifact instead of writing the file yourself, then verify the artifact file exists at `resolvedOutputPath`
-     - Otherwise use `template` as the structure - fill in its sections
-     - Apply `context` and `rules` as constraints when writing - but do NOT copy them into the file
-     - Write to the `resolvedOutputPath` specified in instructions. If it is a glob pattern, choose the concrete file path using the schema instruction and the change's context
+     - Choose the output path before creating anything. If the `resolvedOutputPath` specified in instructions is a glob pattern, choose a concrete path inside `changeRoot` using the schema instruction and the change's context, and verify it remains inside `changeRoot` after resolving symlinks, both in its parent directories and in the file itself if it already exists; if it does not, stop and tell the user. Otherwise the output path is `resolvedOutputPath`
+     - If the `instruction` field delegates creation to a specific skill or command, invoke it only if it can write the artifact to that output path; otherwise stop and tell the user
+     - Otherwise, write it yourself:
+       - Use `template` as the structure - fill in its sections
+       - Apply `context` and `rules` as constraints when writing - but do NOT copy them into the file
+       - Write the file to that output path
+     - Either way, verify the artifact file exists at that output path
    - Show what was created and what's now unlocked
    - STOP after creating ONE artifact
 
@@ -103,7 +123,7 @@ After each invocation, show:
 
 The artifact types and their purpose depend on the schema. The `instruction` field from the instructions output is the authoritative guidance for each artifact - follow it even when the artifact has a familiar name (proposal.md, tasks.md, etc.), since custom schemas may define different content or a different process for the same file names.
 
-If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly.
+If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly - but only once you have chosen and checked the output path, and only if it can write there.
 
 **Guardrails**
 - Create ONE artifact per invocation

package/node_modules/@freeharness/sdd/vendor/openspec/assets/skills/openspec-explore/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: openspec-explore
-description: Enter explore mode - a thinking partner for exploring ideas, investigating problems, and clarifying requirements. Use when the user wants to think through something before or during a change.
+description: Enter OpenSpec explore mode - a thinking partner for exploring ideas, investigating problems, and clarifying requirements in a project that uses OpenSpec. Use when the user wants to think through something before or during an OpenSpec change. Also use when the user says "openspec explore" or "opsx explore".
 allowed-tools: Bash(openspec:*)
 license: MIT
 compatibility: Requires openspec CLI.
@@ -11,12 +11,23 @@ metadata:
 
 Enter explore mode. Think deeply. Visualize freely. Follow the conversation wherever it goes.
 
-**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, investigate the codebase, and run read-only commands or tools without confirmation, but you must NEVER write code or implement features. If the user asks you to implement something, remind them to exit explore mode first and create a change proposal. You MAY create or update OpenSpec change artifacts (proposals, designs, specs) within a confirmed scope—that's capturing thinking, not implementing. Answering design or clarifying questions is never consent to write. Before the first write-capable action, name the artifacts or files you would change and what you would do, ask a direct yes/no question, and wait for the user's confirmation in a separate message. Confirmation covers only the scope you described; ask again before expanding it. For a new change, scaffold it first as described below.
+**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, investigate the codebase, and run read-only commands or tools without confirmation, but you must NEVER write code or implement features. If the user asks you to implement something, do not start it here: say that explore mode does not implement, and point them at `/openspec-propose`, which turns the discussion into a change. The work happens from that change, never from explore mode. You MAY create or update OpenSpec change artifacts (proposals, designs, specs) within a confirmed scope—that's capturing thinking, not implementing. Answering design or clarifying questions is never consent to write. Before the first write-capable action, name the artifacts or files you would change and what you would do, ask a direct yes/no question, and wait for the user's confirmation in a separate message. Confirmation covers only the scope you described; ask again before expanding it. An explicit request from the user to capture the exploration as a new change is itself that confirmation, covering the change and the change artifacts the request names; scaffold it first as described below.
 
 **This is a stance, not a workflow.** There are no fixed steps, no required sequence, no mandatory outputs. You're a thinking partner helping the user explore.
 
 **Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
 
+**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.
+
+One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.
+
+Otherwise, with no root, what happens next depends on how this workflow was reached:
+
+- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
+- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.
+
+In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.
+
 ---
 
 ## The Stance
@@ -117,7 +128,7 @@ openspec list --json
 
 This tells you:
 - If there are active changes
-- Their names, schemas, and status
+- Their names and task status
 - What the user might be working on
 
 That is the *change* list - work in flight. It does not include the project's durable capabilities, so list those too:
@@ -141,14 +152,14 @@ Think freely. When insights crystallize, you might offer:
 - "This feels solid enough to start a change. Want me to create a proposal?"
 - Or keep exploring - no pressure to formalize
 
-If the user asks you to capture the exploration as a new change, transition seamlessly into the requested capture:
+If the user asks you to capture the exploration as a new change, that request is the confirmation required above. It covers scaffolding that change and creating the change artifacts the request names, and nothing else. This holds only when the request is theirs: a yes to an offer you made confirms only the scope your offer itself named, so name the change and the artifacts in the offer. Don't re-ask for what they already asked for; do ask before anything beyond it. Transition seamlessly into the requested capture:
 
 1. Run `openspec new change "<name>"` (with `--store <id>` when applicable) before creating any artifacts. Never create a new change directory under `openspec/changes/` by hand; the CLI scaffold creates required metadata such as `.openspec.yaml`. Keep the selected `--store <id>` on every applicable follow-up `status` and `instructions` command.
 2. Run `openspec status --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store), then process the requested artifacts in dependency order. For each requested artifact that is `ready`, run `openspec instructions "<artifact-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store). Before creating a requested artifact, evaluate any condition in its own `instruction` against the explored change; record a deliberate skip instead when the condition does not apply. If a requested artifact is blocked by a direct prerequisite the user did not request, run `openspec instructions "<prerequisite-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) for that prerequisite whether it is `ready` or `blocked`. If its own `instruction` states a condition, evaluate that condition against the explored change and record a deliberate skip only when the condition does not apply. If the condition applies, or the prerequisite is not conditional, treat it as a normal prerequisite and ask before expanding the capture. Do not create an unrequested prerequisite unless the user approves.
-3. Follow the returned `template` and `instruction` fields. Read completed dependency files listed in `dependencies`, and apply `context` and `rules` as constraints without copying them into the artifact. If the instruction delegates creation to a specific skill or command, invoke it; otherwise write the artifact to `resolvedOutputPath`, using the instruction to choose a concrete path when it is a glob. Verify that the selected concrete output exists.
+3. Follow the returned `template` and `instruction` fields. Read completed dependency files listed in `dependencies`, and apply `context` and `rules` as constraints without copying them into the artifact. Choose the output path before creating anything: when `resolvedOutputPath` is a glob, use the instruction to choose a concrete path inside `changeRoot` and verify it remains inside `changeRoot` after resolving symlinks, both in its parent directories and in the file itself if it already exists; if it does not, stop and tell the user. Otherwise the output path is `resolvedOutputPath`. If the instruction delegates creation to a specific skill or command, invoke it only if it can write the artifact to that output path; otherwise stop and tell the user. Otherwise write the artifact to that output path. Verify that the selected concrete output exists at that output path.
 4. After creating each artifact, re-run `openspec status --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) and continue until every requested artifact is `done`, `skipped`, or was deliberately skipped because its own `instruction` stated a condition that did not apply. Tell the user about a deliberate conditional skip, remember it, and do not reconsider it. Dependencies are enablers, not gates: if a requested artifact is still `blocked` only because you deliberately skipped a conditional prerequisite, run `openspec instructions "<artifact-id>" --change "<name>" --json` (append the confirmed `--store "<id>"` only for a registered standalone store) despite the blocked status, then create it using step 3 only when those recorded conditional skips are its sole missing dependencies. If a requested artifact is blocked by a prerequisite the user did not ask to capture and cannot be conditionally skipped, explain that dependency and ask before expanding the capture.
 
-Capture the artifact(s) the user requested without asking them to invoke another workflow command. If they asked only to start a change, stop after scaffolding and show its status.
+Capture the artifact(s) the user requested without asking them to invoke another workflow command. If they asked only to start a change, stop after scaffolding and show its status. When the requested capture is done, stop there and name where the work continues: `/openspec-propose` writes the remaining planning artifacts, and `/openspec-apply-change` implements the change once tasks exist. Capturing artifacts never starts implementing them.
 
 ### When a change exists
 
@@ -167,6 +178,8 @@ If the user mentions a change or you detect one is relevant:
 
    `<capability-path>` is the spec directory relative to `specs/` (for example, `user-auth` or `identity/user-auth`). Preserve an existing capability's full path and follow the project's established organization for new capabilities.
 
+   The files below are the default spec-driven schema's. With another schema, capture each insight in whichever artifact from `artifactPaths` fits it, and name that artifact in your offer; never create an artifact the schema does not define.
+
     | Insight Type               | Where to Capture                    |
     |----------------------------|-------------------------------------|
     | New requirement discovered | `specs/<capability-path>/spec.md` |
@@ -176,7 +189,7 @@ If the user mentions a change or you detect one is relevant:
     | New work identified        | `tasks.md`                        |
     | Assumption invalidated     | Relevant artifact                   |
 
-   Example offers:
+   Example offers (default schema):
    - "That's a design decision. Capture it in design.md?"
    - "This is a new requirement. Add it to specs?"
    - "This changes scope. Update the proposal?"
@@ -304,8 +317,8 @@ You: That changes everything.
 
 There's no required ending. Discovery might:
 
-- **Flow into a proposal**: "Ready to start? I can create a change proposal."
-- **Result in artifact updates**: "Updated design.md with these decisions"
+- **Flow into a proposal**: "Ready to start? Run `/openspec-propose` and this becomes a change."
+- **Result in artifact updates**: "Updated the design with these decisions"
 - **Just provide clarity**: User has what they need, moves on
 - **Continue later**: "We can pick this up anytime"
 
@@ -321,7 +334,7 @@ When it feels like things are crystallizing, you might summarize:
 **Open questions**: [if any remain]
 
 **Next steps** (if ready):
-- Create a change proposal
+- Turn this into a change: `/openspec-propose`
 - Keep exploring: just keep talking
 ```
 
@@ -331,11 +344,11 @@ But this summary is optional. Sometimes the thinking IS the value.
 
 ## Guardrails
 
-- **Don't implement** - Never write code or implement features. Workflow configuration counts too: creating or editing schemas, templates, or `openspec/config.yaml` is a change, not thinking. Creating or updating OpenSpec change artifacts within the confirmed scope is fine, writing anything else is not.
+- **Don't implement** - Never write code or implement features. Workflow configuration counts too: creating or editing schemas, templates, or `openspec/config.yaml` is a change, not thinking. Creating or updating OpenSpec change artifacts within the confirmed scope is fine, writing anything else is not. When the user is ready to build, name the handoff rather than starting: `/openspec-propose` turns the discussion into a change, and the work happens there.
 - **Don't fake understanding** - If something is unclear, dig deeper
 - **Don't rush** - Discovery is thinking time, not task time
 - **Don't force structure** - Let patterns emerge naturally
-- **Don't auto-capture** - Offer to save insights, don't just do it. Read-only commands and tools need no confirmation. Before the first write-capable action—including `openspec new change` or another command that writes files—name the artifacts or files and proposed changes, ask a direct yes/no question, and wait for explicit confirmation in a separate user message. That confirmation covers only the described scope; ask again before expanding it. Answers to design or clarifying questions are never consent to write.
+- **Don't auto-capture** - Offer to save insights, don't just do it. Read-only commands and tools need no confirmation. Before the first write-capable action—including `openspec new change` or another command that writes files—name the artifacts or files and proposed changes, ask a direct yes/no question, and wait for explicit confirmation in a separate user message. That confirmation covers only the described scope; ask again before expanding it. Answers to design or clarifying questions are never consent to write. That rule governs `openspec new change` whenever you are the one proposing the capture; the user's own capture request is the exception, handled in the capture transition above.
 - **Don't manually scaffold changes** - Never create a new change directory under `openspec/changes/` by hand. Always use `openspec new change "<name>"` (with `--store <id>` when applicable) so required metadata such as `.openspec.yaml` is created before writing artifacts.
 - **Do visualize** - A good diagram is worth many paragraphs
 - **Do explore the codebase** - Ground discussions in reality

package/node_modules/@freeharness/sdd/vendor/openspec/assets/skills/openspec-ff-change/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: openspec-ff-change
-description: Fast-forward through OpenSpec artifact creation. Use when the user wants to quickly create all artifacts needed for implementation without stepping through each one individually.
+description: Fast-forward through OpenSpec artifact creation. Use when the user wants to quickly create all artifacts needed for implementation without stepping through each one individually. Also use when the user says "openspec ff" or "opsx ff".
 allowed-tools: Bash(openspec:*)
 license: MIT
 compatibility: Requires openspec CLI.
@@ -13,6 +13,17 @@ Fast-forward through artifact creation - generate everything needed to start imp
 
 **Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
 
+**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.
+
+One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.
+
+Otherwise, with no root, what happens next depends on how this workflow was reached:
+
+- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
+- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.
+
+In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.
+
 **Input**: The user's request should include a change name (kebab-case) OR a description of what they want to build.
 
 **Steps**
@@ -65,8 +76,9 @@ Fast-forward through artifact creation - generate everything needed to start imp
         - Identify the target project from the request and project context; the planning home may be separate from the code. If the target is unclear, ask. For greenfield or non-code changes, inspect the available structure and relevant documents. If source is unavailable, state the limitation and ask when it materially affects the plan.
         - Ground scope, approach, and tasks in what you find. Distinguish observed behavior from assumptions and proposed additions; surface conflicts with existing specs instead of silently deciding which is correct.
         - Do this discovery now, rather than leaving generic "explore the codebase" or "make a plan" tasks for implementation. Keep any necessary follow-up investigation specific to an unresolved question.
-      - If the `instruction` field delegates creation to a specific skill or command, invoke it to produce the artifact instead of writing the file yourself, then verify the artifact file exists at `resolvedOutputPath`
-      - Otherwise create the artifact file using `template` as the structure and write it to `resolvedOutputPath`. If `resolvedOutputPath` is a glob, follow `instruction` to choose the concrete file path
+      - Choose the output path before creating anything. If `resolvedOutputPath` is a glob, follow `instruction` to choose a concrete path inside `changeRoot` that matches the glob, and verify it remains inside `changeRoot` after resolving symlinks, both in its parent directories and in the file itself if it already exists; if it does not, stop and tell the user. Otherwise the output path is `resolvedOutputPath`
+      - If the `instruction` field delegates creation to a specific skill or command, invoke it only if it can write the artifact to that output path; otherwise stop and tell the user. Then verify the artifact file exists at that output path
+      - Otherwise create the artifact file using `template` as the structure and write it to that output path
       - Apply `context` and `rules` as constraints - but do NOT copy them into the file
       - Show brief progress: "✓ Created <artifact-id>"
 
@@ -80,7 +92,7 @@ Fast-forward through artifact creation - generate everything needed to start imp
       - Dependencies are enablers, not gates: if a required artifact is still `blocked` only because you skipped a conditional dependency, write it anyway
       - Stop when every artifact in the required set is `done`, `skipped`, or was deliberately skipped
 
-   c. **If an artifact requires user input** (unclear context):
+   c. **If an artifact requires user input** (critically unclear context):
       - Ask the user to clarify
       - Then continue with creation
 
@@ -100,7 +112,7 @@ After completing all artifacts, summarize:
 **Artifact Creation Guidelines**
 
 - Follow the `instruction` field from `openspec instructions` for each artifact type - it is the authoritative guidance, even for familiar artifact names
-- If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly
+- If the `instruction` field directs you to use a specific skill or command to create the artifact, invoke it instead of writing the artifact directly - but only once you have chosen and checked the output path, and only if it can write there
 - The schema defines what each artifact should contain - follow it
 - Read dependency artifacts for context before creating new ones
 - Use `template` as the structure for your output file - fill in its sections

package/node_modules/@freeharness/sdd/vendor/openspec/assets/skills/openspec-new-change/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: openspec-new-change
-description: Start a new OpenSpec change using the experimental artifact workflow. Use when the user wants to create a new feature, fix, or modification with a structured step-by-step approach.
+description: Start a new OpenSpec change using the experimental artifact workflow. Use when the user wants to create a new feature, fix, or modification with a structured step-by-step approach. Also use when the user says "openspec new change" or "opsx new".
 allowed-tools: Bash(openspec:*)
 license: MIT
 compatibility: Requires openspec CLI.
@@ -13,6 +13,17 @@ Start a new change using the experimental artifact-driven approach.
 
 **Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`, `schemas`, `view`). Once selected, treat `--store <id>` as sticky for the rest of the workflow. Every unscoped example of those commands below is shorthand: before running it, append the flag. For example, run `openspec status --change "<name>" --json --store "<id>"`, not the unscoped form shown below. Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
 
+**Project check:** These steps expect a project that already uses OpenSpec. Before the first step that writes anything (`new change`, `archive`, `sync specs`, or authoring an artifact file), confirm the project has a root: run `openspec list --json` (with `--store <id>` when a store is selected, since the store is then the root) and read `root`. A root object means the project is set up. `"root": null` means it is not - there is no `openspec/` directory here, and a write such as `openspec new change` would create one as a side effect. The command also exits non-zero, which is that answer rather than a broken CLI, so read the JSON instead of retrying or working around it.
+
+One `"root": null` is not about setup: when a `status` error message starts with `Declared in` or `Invalid store declaration in` and names this project's `openspec/config.yaml` (or `config.yml`), the project does use OpenSpec through a store it declares, which this machine cannot resolve (the store is not registered, or the `store:` line is malformed). Do not treat it as uninitialized and skip the branches below: stop before writing and show the user that error's `message` and `fix`.
+
+Otherwise, with no root, what happens next depends on how this workflow was reached:
+
+- **Auto-selected**: you chose this workflow yourself, without the user naming OpenSpec, naming this skill, or running its slash command. Stop using OpenSpec and answer the request normally, as you would with no OpenSpec installed. Do not ask them to set anything up and do not mention OpenSpec setup.
+- **Explicit OpenSpec request**: the user named OpenSpec, named this skill, or ran its slash command. Stop before writing and ask how to proceed: set this project up (`openspec init`), target a store they already have (`--store <id>`), or continue without OpenSpec for this request. Wait for their answer.
+
+In both branches, never create the root as a side effect: do not run `openspec init` until the user asks for it, do not hand-create `openspec/` files, and do not let a command create it.
+
 **Input**: The user's request should include a change name (kebab-case) OR a description of what they want to build.
 
 **Steps**