formulab 0.20.0 → 0.21.0

package/CHANGELOG.md

@@ -5,6 +5,52 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## [0.21.0] - 2026-07-20
+
+### Added
+
+- **`metal/weldStrength`** — load-carrying capacity of an equal-leg fillet weld
+  (AISC 360 ASD / AWS D1.1). Given leg size, weld length/count, electrode class, and
+  applied shear load, it returns the effective throat (`0.707 × leg`), effective area,
+  allowable shear stress (`0.30 × FEXX`), allowable load (capacity), actual stress,
+  utilization, the minimum leg that carries the load, and an `isSafe` verdict.
+  - Electrode classes `E60`–`E110` map to their exact SI `FEXX` (1 ksi = 6.894757 MPa,
+    rounded to the nearest MPa: E70 = 483, E100 = 689, E110 = 758).
+  - **v1 scope is deliberately conservative** (matches the common baseline calculators),
+    documented in the JSDoc: ASD only (LRFD deferred), longitudinal/conservative
+    `0.30 × FEXX` with no directional strength increase, weld-metal check only
+    (base-metal rupture is the engineer's responsibility), and equal-leg 90° joints.
+    Each is an additive extension point for future demand.
+  - A hand-derived golden test pins the AISC ASD model (E70, leg 6 mm, L 100 mm,
+    P 50 kN → capacity 61.47 kN, utilization 0.8135, min leg 4.881 mm).
+  - `appliedLoad = 0` is a valid capacity-only query; throws `RangeError` on non-positive
+    leg/length, `weldCount < 1`, or negative load.
+
+## [0.20.1] - 2026-07-20
+
+### Fixed
+
+- **`metal/pressFit` interface pressure was ~36% too high** (correctness). The
+  C-factor used the **rigid-shaft** model `C = (d_o²+d²)/(d_o²−d²) + nu`, which
+  assumes only the hub deforms. But `pressFit` takes a single `E`/`poissonRatio`,
+  i.e. shaft and hub are the **same material**, so the solid shaft *also* compresses
+  and absorbs part of the interference. Shigley's same-material, solid-shaft
+  derivation cancels the two Poisson terms and leaves `C = (d_o²+d²)/(d_o²−d²) + 1`.
+  For a steel-on-steel sample (shaft 50.025, hole 50.000, hub OD 100, L 50,
+  E 210 GPa) the interface pressure drops from **53.4 MPa to 39.4 MPa**, matching
+  Shigley; assembly force and holding torque (and the derived hub-hoop / shaft-radial
+  stresses) scale by the same factor.
+
+  > ⚠️ **Behavioral change for consumers.** Every `pressFit` output except
+  > `interference` decreases by ~26% (÷1.356). Re-validate any downstream limits or
+  > displayed values.
+
+  A hand-derived golden test now pins the interface pressure to Shigley's value so
+  this cannot silently regress. A consequence of the nu cancellation: for this
+  model the result is **independent of `poissonRatio`**; the field is retained (it
+  belongs to the material spec and the deferred dissimilar-material model will need
+  it) but no longer affects the output.
+
 ## [0.20.0] - 2026-07-14
 
 ### Added
@@ -19,6 +65,11 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [0.19.0] - 2026-07-14
 
+> **Not published to npm as a separate version.** This commit was pushed to `main`
+> together with 0.20.0, so a single publish run fired and these changes shipped inside
+> **0.20.0**. Consumers needing the springback fix must install `formulab@>=0.20.0` —
+> `0.19.0` does not exist on the registry.
+
 Resolution of ISSUE-20260714 (springback model singularity), execution-verified in triage.
 
 ### Changed

package/README.md

@@ -11,12 +11,12 @@ A comprehensive collection of engineering formulas and calculations for manufact
 
 ## Features
 
-- **210 industrial calculations + 8 type guards** — OEE, Cpk, SPC control charts, Gage R&R, Weibull, metal weight, CNC machining, GD&T, pipe flow, CBM, NIOSH lifting, PMV/PPD, arc flash, battery SOH, GHG emissions, PID tuning, and more
+- **211 industrial calculations + 8 type guards** — OEE, Cpk, SPC control charts, Gage R&R, Weibull, metal weight, CNC machining, GD&T, pipe flow, CBM, NIOSH lifting, PMV/PPD, arc flash, battery SOH, GHG emissions, PID tuning, and more
 - **15 specialized domains** — Quality, Metal, Chemical, Electronics, Construction, Automotive, Logistics, Energy, Safety, Food, Utility, Battery, Environmental, Machining, Industrial Engineering
 - **Zero dependencies** — Lightweight and fast
 - **TypeScript first** — Full type definitions included
 - **Tree-shakeable** — Import only what you need
-- **2,888 tests** — Coverage thresholds: 90% lines, 95% functions, 85% branches ([CI pipeline](https://github.com/iyulab/formulab/actions/workflows/ci.yml))
+- **2,921 tests** — Coverage thresholds: 90% lines, 95% functions, 85% branches ([CI pipeline](https://github.com/iyulab/formulab/actions/workflows/ci.yml))
 - **Research-based** — Golden reference tests verified against NIOSH 94-110, AIAG/ASTM E2587, JIPM, ASME B16.5, ISO 22514-2, and more
 
 ## Verification Status
@@ -70,6 +70,9 @@ The following functions include tests verified against published reference value
 | `flangeSpec()` | ASME B16.5 | Class 150/300/600 flange dimensions |
 | `pipeSpec()` | ASME B36.10 | SCH40/80/160 wall thickness |
 | `awgProperties()` | ANSI/AWG | AWG 0-40 diameter, resistance |
+| `pressFit()` | Shigley's Mechanical Engineering Design | Same-material solid-shaft interface pressure (39.36 MPa), nu-independence |
+| `spring()` | Shigley's Mechanical Engineering Design | Spring rate (Eq. 10-9), Wahl factor (Eq. 10-5), corrected shear stress (Eq. 10-7) |
+| `weldStrength()` | AISC 360 ASD / AWS D1.1 | Equal-leg fillet: throat 0.707·leg, allowable shear 0.30·FEXX (E70=144.9 MPa), capacity/utilization |
 
 ### Edge Case Handling
 
@@ -219,6 +222,7 @@ import { metalWeight, bendAllowance, cutting, bearing } from 'formulab/metal';
 | `vibration()` | Natural frequency analysis |
 | `weldHeat()` | Weld heat input calculation |
 | `welding()` | Welding parameters |
+| `weldStrength()` | Fillet weld strength / capacity (AISC ASD) |
 | `materialGradeConverter()` | ASTM/EN/JIS/GB/KS grade cross-reference |
 | `pipeSpec()` | ANSI/ASME pipe dimensions lookup |
 | `flangeSpec()` | ASME B16.5 flange dimensions lookup |

package/dist/metal/index.d.ts

@@ -1,4 +1,4 @@
-export type { MetalShape, MaterialName, MetalWeightInput, MetalWeightResult, BendingMaterial, ShapeType, BendAllowanceInput, BendAllowanceResult, SpringbackInput, SpringbackResult, FlatPatternInput, FlatPatternResult, KFactorReverseInput, KFactorReverseResult, PressOperation, BendType, PressTonnageInput, PressTonnageResult, BearingType, BearingInput, BearingResult, BoltCalculationMode, LubricationCondition, BoltInput, BoltResult, CuttingOperation, CuttingInput, CuttingResult, CuttingAlgorithm, CuttingPiece, CuttingStockInput, CuttingPattern, CuttingStockResult, GearCalculationMode, GearInput, GearResult, HardnessScale, HardnessInput, HardnessResult, MaterialCategory, MaterialInput, MaterialResult, MaterialSpec, PressFitInput, PressFitResult, RoughnessScale, RoughnessInput, RoughnessResult, PitchType, ScrewInput, ScrewResult, ScrewSpec, SpringMaterial, SpringInput, SpringResult, ThreadStandard, TapInput, TapResult, ThreadType, ThreadInput, ThreadResult, ThreadSpec, FitType, ToleranceInput, ToleranceResult, VibrationSystem, CrossSection, VibrationMaterial, VibrationInput, FrequencyMode, VibrationResult, WeldProcess, WeldBaseMetal, CrackingRisk, WeldPreheatSourceCode, WeldRecommendationCode, WeldRecommendation, WeldHeatInput, WeldHeatResult, WeldingBaseMetal, JointType, WeldPosition, WeldingInput, WeldingRod, WeldingResult, MaterialStandard, MaterialGradeConverterInput, MaterialGradeConverterResult, PipeStandard, PipeSchedule, PipeSpecInput, PipeSpecResult, FlangeStandard, PressureClass, FlangeSpecInput, FlangeSpecResult, } from './types.js';
+export type { MetalShape, MaterialName, MetalWeightInput, MetalWeightResult, BendingMaterial, ShapeType, BendAllowanceInput, BendAllowanceResult, SpringbackInput, SpringbackResult, FlatPatternInput, FlatPatternResult, KFactorReverseInput, KFactorReverseResult, PressOperation, BendType, PressTonnageInput, PressTonnageResult, BearingType, BearingInput, BearingResult, BoltCalculationMode, LubricationCondition, BoltInput, BoltResult, CuttingOperation, CuttingInput, CuttingResult, CuttingAlgorithm, CuttingPiece, CuttingStockInput, CuttingPattern, CuttingStockResult, GearCalculationMode, GearInput, GearResult, HardnessScale, HardnessInput, HardnessResult, MaterialCategory, MaterialInput, MaterialResult, MaterialSpec, PressFitInput, PressFitResult, RoughnessScale, RoughnessInput, RoughnessResult, PitchType, ScrewInput, ScrewResult, ScrewSpec, SpringMaterial, SpringInput, SpringResult, ThreadStandard, TapInput, TapResult, ThreadType, ThreadInput, ThreadResult, ThreadSpec, FitType, ToleranceInput, ToleranceResult, VibrationSystem, CrossSection, VibrationMaterial, VibrationInput, FrequencyMode, VibrationResult, WeldProcess, WeldBaseMetal, CrackingRisk, WeldPreheatSourceCode, WeldRecommendationCode, WeldRecommendation, WeldHeatInput, WeldHeatResult, WeldingBaseMetal, JointType, WeldPosition, WeldingInput, WeldingRod, WeldingResult, WeldElectrodeClass, WeldStrengthInput, WeldStrengthResult, MaterialStandard, MaterialGradeConverterInput, MaterialGradeConverterResult, PipeStandard, PipeSchedule, PipeSpecInput, PipeSpecResult, FlangeStandard, PressureClass, FlangeSpecInput, FlangeSpecResult, } from './types.js';
 export { isMetalWeightInput, isBoltInput } from './guards.js';
 export { metalWeight } from './metalWeight.js';
 export { bendAllowance } from './bendAllowance.js';
@@ -23,6 +23,7 @@ export { tolerance } from './tolerance.js';
 export { vibration } from './vibration.js';
 export { weldHeat } from './weldHeat.js';
 export { welding } from './welding.js';
+export { weldStrength } from './weldStrength.js';
 export { materialGradeConverter } from './materialGradeConverter.js';
 export { pipeSpec } from './pipeSpec.js';
 export { flangeSpec } from './flangeSpec.js';

package/dist/metal/index.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../src/metal/index.ts"],"names":[],"mappings":"AACA,YAAY,EAEV,UAAU,EACV,YAAY,EACZ,gBAAgB,EAChB,iBAAiB,EAEjB,eAAe,EACf,SAAS,EACT,kBAAkB,EAClB,mBAAmB,EACnB,eAAe,EACf,gBAAgB,EAChB,gBAAgB,EAChB,iBAAiB,EACjB,mBAAmB,EACnB,oBAAoB,EAEpB,cAAc,EACd,QAAQ,EACR,iBAAiB,EACjB,kBAAkB,EAElB,WAAW,EACX,YAAY,EACZ,aAAa,EAEb,mBAAmB,EACnB,oBAAoB,EACpB,SAAS,EACT,UAAU,EAEV,gBAAgB,EAChB,YAAY,EACZ,aAAa,EAEb,gBAAgB,EAChB,YAAY,EACZ,iBAAiB,EACjB,cAAc,EACd,kBAAkB,EAElB,mBAAmB,EACnB,SAAS,EACT,UAAU,EAEV,aAAa,EACb,aAAa,EACb,cAAc,EAEd,gBAAgB,EAChB,aAAa,EACb,cAAc,EACd,YAAY,EAEZ,aAAa,EACb,cAAc,EAEd,cAAc,EACd,cAAc,EACd,eAAe,EAEf,SAAS,EACT,UAAU,EACV,WAAW,EACX,SAAS,EAET,cAAc,EACd,WAAW,EACX,YAAY,EAEZ,cAAc,EACd,QAAQ,EACR,SAAS,EAET,UAAU,EACV,WAAW,EACX,YAAY,EACZ,UAAU,EAEV,OAAO,EACP,cAAc,EACd,eAAe,EAEf,eAAe,EACf,YAAY,EACZ,iBAAiB,EACjB,cAAc,EACd,aAAa,EACb,eAAe,EAEf,WAAW,EACX,aAAa,EACb,YAAY,EACZ,qBAAqB,EACrB,sBAAsB,EACtB,kBAAkB,EAClB,aAAa,EACb,cAAc,EAEd,gBAAgB,EAChB,SAAS,EACT,YAAY,EACZ,YAAY,EACZ,UAAU,EACV,aAAa,EAEb,gBAAgB,EAChB,2BAA2B,EAC3B,4BAA4B,EAE5B,YAAY,EACZ,YAAY,EACZ,aAAa,EACb,cAAc,EAEd,cAAc,EACd,aAAa,EACb,eAAe,EACf,gBAAgB,GACjB,MAAM,YAAY,CAAC;AAGpB,OAAO,EAAE,kBAAkB,EAAE,WAAW,EAAE,MAAM,aAAa,CAAC;AAG9D,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,aAAa,EAAE,MAAM,oBAAoB,CAAC;AACnD,OAAO,EAAE,UAAU,EAAE,MAAM,iBAAiB,CAAC;AAC7C,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AACrD,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,IAAI,EAAE,UAAU,EAAE,gBAAgB,EAAE,MAAM,WAAW,CAAC;AAC/D,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,IAAI,EAAE,MAAM,WAAW,CAAC;AACjC,OAAO,EAAE,QAAQ,EAAE,gBAAgB,EAAE,MAAM,eAAe,CAAC;AAC3D,OAAO,EAAE,QAAQ,EAAE,aAAa,EAAE,SAAS,EAAE,MAAM,eAAe,CAAC;AACnE,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,KAAK,EAAE,eAAe,EAAE,MAAM,YAAY,CAAC;AACpD,OAAO,EAAE,MAAM,EAAE,MAAM,aAAa,CAAC;AACrC,OAAO,EAAE,GAAG,EAAE,MAAM,UAAU,CAAC;AAC/B,OAAO,EAAE,MAAM,EAAE,cAAc,EAAE,eAAe,EAAE,MAAM,aAAa,CAAC;AACtE,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,sBAAsB,EAAE,MAAM,6BAA6B,CAAC;AACrE,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,UAAU,EAAE,MAAM,iBAAiB,CAAC"}
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../src/metal/index.ts"],"names":[],"mappings":"AACA,YAAY,EAEV,UAAU,EACV,YAAY,EACZ,gBAAgB,EAChB,iBAAiB,EAEjB,eAAe,EACf,SAAS,EACT,kBAAkB,EAClB,mBAAmB,EACnB,eAAe,EACf,gBAAgB,EAChB,gBAAgB,EAChB,iBAAiB,EACjB,mBAAmB,EACnB,oBAAoB,EAEpB,cAAc,EACd,QAAQ,EACR,iBAAiB,EACjB,kBAAkB,EAElB,WAAW,EACX,YAAY,EACZ,aAAa,EAEb,mBAAmB,EACnB,oBAAoB,EACpB,SAAS,EACT,UAAU,EAEV,gBAAgB,EAChB,YAAY,EACZ,aAAa,EAEb,gBAAgB,EAChB,YAAY,EACZ,iBAAiB,EACjB,cAAc,EACd,kBAAkB,EAElB,mBAAmB,EACnB,SAAS,EACT,UAAU,EAEV,aAAa,EACb,aAAa,EACb,cAAc,EAEd,gBAAgB,EAChB,aAAa,EACb,cAAc,EACd,YAAY,EAEZ,aAAa,EACb,cAAc,EAEd,cAAc,EACd,cAAc,EACd,eAAe,EAEf,SAAS,EACT,UAAU,EACV,WAAW,EACX,SAAS,EAET,cAAc,EACd,WAAW,EACX,YAAY,EAEZ,cAAc,EACd,QAAQ,EACR,SAAS,EAET,UAAU,EACV,WAAW,EACX,YAAY,EACZ,UAAU,EAEV,OAAO,EACP,cAAc,EACd,eAAe,EAEf,eAAe,EACf,YAAY,EACZ,iBAAiB,EACjB,cAAc,EACd,aAAa,EACb,eAAe,EAEf,WAAW,EACX,aAAa,EACb,YAAY,EACZ,qBAAqB,EACrB,sBAAsB,EACtB,kBAAkB,EAClB,aAAa,EACb,cAAc,EAEd,gBAAgB,EAChB,SAAS,EACT,YAAY,EACZ,YAAY,EACZ,UAAU,EACV,aAAa,EAEb,kBAAkB,EAClB,iBAAiB,EACjB,kBAAkB,EAElB,gBAAgB,EAChB,2BAA2B,EAC3B,4BAA4B,EAE5B,YAAY,EACZ,YAAY,EACZ,aAAa,EACb,cAAc,EAEd,cAAc,EACd,aAAa,EACb,eAAe,EACf,gBAAgB,GACjB,MAAM,YAAY,CAAC;AAGpB,OAAO,EAAE,kBAAkB,EAAE,WAAW,EAAE,MAAM,aAAa,CAAC;AAG9D,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,aAAa,EAAE,MAAM,oBAAoB,CAAC;AACnD,OAAO,EAAE,UAAU,EAAE,MAAM,iBAAiB,CAAC;AAC7C,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AACrD,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,IAAI,EAAE,UAAU,EAAE,gBAAgB,EAAE,MAAM,WAAW,CAAC;AAC/D,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,IAAI,EAAE,MAAM,WAAW,CAAC;AACjC,OAAO,EAAE,QAAQ,EAAE,gBAAgB,EAAE,MAAM,eAAe,CAAC;AAC3D,OAAO,EAAE,QAAQ,EAAE,aAAa,EAAE,SAAS,EAAE,MAAM,eAAe,CAAC;AACnE,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,KAAK,EAAE,eAAe,EAAE,MAAM,YAAY,CAAC;AACpD,OAAO,EAAE,MAAM,EAAE,MAAM,aAAa,CAAC;AACrC,OAAO,EAAE,GAAG,EAAE,MAAM,UAAU,CAAC;AAC/B,OAAO,EAAE,MAAM,EAAE,cAAc,EAAE,eAAe,EAAE,MAAM,aAAa,CAAC;AACtE,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,sBAAsB,EAAE,MAAM,6BAA6B,CAAC;AACrE,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,UAAU,EAAE,MAAM,iBAAiB,CAAC"}

package/dist/metal/index.js

@@ -24,6 +24,7 @@ export { tolerance } from './tolerance.js';
 export { vibration } from './vibration.js';
 export { weldHeat } from './weldHeat.js';
 export { welding } from './welding.js';
+export { weldStrength } from './weldStrength.js';
 export { materialGradeConverter } from './materialGradeConverter.js';
 export { pipeSpec } from './pipeSpec.js';
 export { flangeSpec } from './flangeSpec.js';

package/dist/metal/index.js.map

@@ -1 +1 @@
-{"version":3,"file":"index.js","sourceRoot":"","sources":["../../src/metal/index.ts"],"names":[],"mappings":"AA2HA,SAAS;AACT,OAAO,EAAE,kBAAkB,EAAE,WAAW,EAAE,MAAM,aAAa,CAAC;AAE9D,YAAY;AACZ,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,aAAa,EAAE,MAAM,oBAAoB,CAAC;AACnD,OAAO,EAAE,UAAU,EAAE,MAAM,iBAAiB,CAAC;AAC7C,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AACrD,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,IAAI,EAAE,UAAU,EAAE,gBAAgB,EAAE,MAAM,WAAW,CAAC;AAC/D,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,IAAI,EAAE,MAAM,WAAW,CAAC;AACjC,OAAO,EAAE,QAAQ,EAAE,gBAAgB,EAAE,MAAM,eAAe,CAAC;AAC3D,OAAO,EAAE,QAAQ,EAAE,aAAa,EAAE,SAAS,EAAE,MAAM,eAAe,CAAC;AACnE,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,KAAK,EAAE,eAAe,EAAE,MAAM,YAAY,CAAC;AACpD,OAAO,EAAE,MAAM,EAAE,MAAM,aAAa,CAAC;AACrC,OAAO,EAAE,GAAG,EAAE,MAAM,UAAU,CAAC;AAC/B,OAAO,EAAE,MAAM,EAAE,cAAc,EAAE,eAAe,EAAE,MAAM,aAAa,CAAC;AACtE,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,sBAAsB,EAAE,MAAM,6BAA6B,CAAC;AACrE,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,UAAU,EAAE,MAAM,iBAAiB,CAAC"}
+{"version":3,"file":"index.js","sourceRoot":"","sources":["../../src/metal/index.ts"],"names":[],"mappings":"AA+HA,SAAS;AACT,OAAO,EAAE,kBAAkB,EAAE,WAAW,EAAE,MAAM,aAAa,CAAC;AAE9D,YAAY;AACZ,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,aAAa,EAAE,MAAM,oBAAoB,CAAC;AACnD,OAAO,EAAE,UAAU,EAAE,MAAM,iBAAiB,CAAC;AAC7C,OAAO,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC/C,OAAO,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AACrD,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,IAAI,EAAE,UAAU,EAAE,gBAAgB,EAAE,MAAM,WAAW,CAAC;AAC/D,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,IAAI,EAAE,MAAM,WAAW,CAAC;AACjC,OAAO,EAAE,QAAQ,EAAE,gBAAgB,EAAE,MAAM,eAAe,CAAC;AAC3D,OAAO,EAAE,QAAQ,EAAE,aAAa,EAAE,SAAS,EAAE,MAAM,eAAe,CAAC;AACnE,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,KAAK,EAAE,eAAe,EAAE,MAAM,YAAY,CAAC;AACpD,OAAO,EAAE,MAAM,EAAE,MAAM,aAAa,CAAC;AACrC,OAAO,EAAE,GAAG,EAAE,MAAM,UAAU,CAAC;AAC/B,OAAO,EAAE,MAAM,EAAE,cAAc,EAAE,eAAe,EAAE,MAAM,aAAa,CAAC;AACtE,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,SAAS,EAAE,MAAM,gBAAgB,CAAC;AAC3C,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,OAAO,EAAE,MAAM,cAAc,CAAC;AACvC,OAAO,EAAE,YAAY,EAAE,MAAM,mBAAmB,CAAC;AACjD,OAAO,EAAE,sBAAsB,EAAE,MAAM,6BAA6B,CAAC;AACrE,OAAO,EAAE,QAAQ,EAAE,MAAM,eAAe,CAAC;AACzC,OAAO,EAAE,UAAU,EAAE,MAAM,iBAAiB,CAAC"}

package/dist/metal/pressFit.d.ts

@@ -5,10 +5,28 @@ import type { PressFitInput, PressFitResult } from './types.js';
  * Formulas:
  * - Interference: delta = d_shaft - d_hole
  * - Interface pressure: p = delta * E / (d * C)
- *   where C = (d_o^2 + d^2)/(d_o^2 - d^2) + nu (for solid shaft)
+ *   where C = (d_o^2 + d^2)/(d_o^2 - d^2) + 1
  * - Assembly force: F = pi * d * L * p * mu
  * - Holding torque: T = pi * d^2 * L * p * mu / 2
  *
+ * Model assumptions baked into the `+ 1` constant (see C-factor below):
+ * both members are the **same material** (a single E, nu is supplied) and the
+ * shaft is **solid** (inner radius = 0). Under these two assumptions Shigley's
+ * general interference equation collapses so that the shaft's own compression
+ * (p*d/E)(1 - nu) adds to the hub's expansion (p*d/E)[(d_o^2+d^2)/(d_o^2-d^2) + nu],
+ * and the two nu terms cancel, leaving a net `+ 1`. A rigid-shaft model (hub
+ * deforms alone) would instead keep `+ nu`; using it here — where the shaft is
+ * the same material and therefore also yields — overstates p by ~36% for typical
+ * steel-on-steel fits. Supporting a hollow shaft or a true dissimilar-material
+ * pair (separate E_shaft/E_hub) would require replacing this branch, not tuning
+ * the constant.
+ *
+ * A consequence of the nu cancellation: for this same-material, solid-shaft model
+ * the interface pressure and every derived stress are **independent of Poisson's
+ * ratio**. `input.poissonRatio` is therefore accepted (it belongs to the material
+ * spec and the deferred dissimilar-material model will need it) but intentionally
+ * not read here — changing it does not change the result.
+ *
  * Reference: Shigley's Mechanical Engineering Design
  */
 export declare function pressFit(input: PressFitInput): PressFitResult;

package/dist/metal/pressFit.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"pressFit.d.ts","sourceRoot":"","sources":["../../src/metal/pressFit.ts"],"names":[],"mappings":"AACA,OAAO,KAAK,EAAE,aAAa,EAAE,cAAc,EAAE,MAAM,YAAY,CAAC;AAEhE;;;;;;;;;;;GAWG;AACH,wBAAgB,QAAQ,CAAC,KAAK,EAAE,aAAa,GAAG,cAAc,CA4F7D"}
+{"version":3,"file":"pressFit.d.ts","sourceRoot":"","sources":["../../src/metal/pressFit.ts"],"names":[],"mappings":"AACA,OAAO,KAAK,EAAE,aAAa,EAAE,cAAc,EAAE,MAAM,YAAY,CAAC;AAEhE;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA6BG;AACH,wBAAgB,QAAQ,CAAC,KAAK,EAAE,aAAa,GAAG,cAAc,CA+F7D"}

package/dist/metal/pressFit.js

@@ -5,14 +5,34 @@ import { roundTo } from '../utils.js';
  * Formulas:
  * - Interference: delta = d_shaft - d_hole
  * - Interface pressure: p = delta * E / (d * C)
- *   where C = (d_o^2 + d^2)/(d_o^2 - d^2) + nu (for solid shaft)
+ *   where C = (d_o^2 + d^2)/(d_o^2 - d^2) + 1
  * - Assembly force: F = pi * d * L * p * mu
  * - Holding torque: T = pi * d^2 * L * p * mu / 2
  *
+ * Model assumptions baked into the `+ 1` constant (see C-factor below):
+ * both members are the **same material** (a single E, nu is supplied) and the
+ * shaft is **solid** (inner radius = 0). Under these two assumptions Shigley's
+ * general interference equation collapses so that the shaft's own compression
+ * (p*d/E)(1 - nu) adds to the hub's expansion (p*d/E)[(d_o^2+d^2)/(d_o^2-d^2) + nu],
+ * and the two nu terms cancel, leaving a net `+ 1`. A rigid-shaft model (hub
+ * deforms alone) would instead keep `+ nu`; using it here — where the shaft is
+ * the same material and therefore also yields — overstates p by ~36% for typical
+ * steel-on-steel fits. Supporting a hollow shaft or a true dissimilar-material
+ * pair (separate E_shaft/E_hub) would require replacing this branch, not tuning
+ * the constant.
+ *
+ * A consequence of the nu cancellation: for this same-material, solid-shaft model
+ * the interface pressure and every derived stress are **independent of Poisson's
+ * ratio**. `input.poissonRatio` is therefore accepted (it belongs to the material
+ * spec and the deferred dissimilar-material model will need it) but intentionally
+ * not read here — changing it does not change the result.
+ *
  * Reference: Shigley's Mechanical Engineering Design
  */
 export function pressFit(input) {
-    const { shaftDiameter, holeDiameter, hubOuterDiameter, contactLength, youngsModulus, poissonRatio, frictionCoefficient, } = input;
+    // Note: poissonRatio is deliberately not destructured — see JSDoc (nu cancels
+    // out of every output for the same-material, solid-shaft model).
+    const { shaftDiameter, holeDiameter, hubOuterDiameter, contactLength, youngsModulus, frictionCoefficient, } = input;
     // Validate inputs
     if (shaftDiameter <= 0)
         throw new RangeError('shaftDiameter must be greater than 0');
@@ -53,11 +73,13 @@ export function pressFit(input) {
     const d_o = hubOuterDiameter; // mm
     // Convert Young's modulus from GPa to MPa
     const E = youngsModulus * 1000; // MPa
-    // Calculate C factor for thick-walled cylinder with solid shaft
-    // C = (d_o^2 + d^2)/(d_o^2 - d^2) + nu
+    // C factor for a same-material, solid-shaft interference fit (see JSDoc).
+    // C = (d_o^2 + d^2)/(d_o^2 - d^2) + 1
+    // The `+ 1` (not `+ nu`) accounts for the solid shaft also compressing under the
+    // contact pressure; the two Poisson terms cancel, so nu drops out entirely.
     const d_sq = d * d;
     const d_o_sq = d_o * d_o;
-    const C = (d_o_sq + d_sq) / (d_o_sq - d_sq) + poissonRatio;
+    const C = (d_o_sq + d_sq) / (d_o_sq - d_sq) + 1;
     // Interface pressure (MPa)
     // p = delta * E / (d * C)
     const interfacePressure = (interference * E) / (d * C);

package/dist/metal/pressFit.js.map

@@ -1 +1 @@
-{"version":3,"file":"pressFit.js","sourceRoot":"","sources":["../../src/metal/pressFit.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,OAAO,EAAE,MAAM,aAAa,CAAC;AAGtC;;;;;;;;;;;GAWG;AACH,MAAM,UAAU,QAAQ,CAAC,KAAoB;IAC3C,MAAM,EACJ,aAAa,EACb,YAAY,EACZ,gBAAgB,EAChB,aAAa,EACb,aAAa,EACb,YAAY,EACZ,mBAAmB,GACpB,GAAG,KAAK,CAAC;IAEV,kBAAkB;IAClB,IAAI,aAAa,IAAI,CAAC;QAAE,MAAM,IAAI,UAAU,CAAC,sCAAsC,CAAC,CAAC;IACrF,IAAI,YAAY,IAAI,CAAC;QAAE,MAAM,IAAI,UAAU,CAAC,qCAAqC,CAAC,CAAC;IACnF,IAAI,gBAAgB,IAAI,CAAC;QAAE,MAAM,IAAI,UAAU,CAAC,yCAAyC,CAAC,CAAC;IAC3F,IAAI,aAAa,IAAI,CAAC;QAAE,MAAM,IAAI,UAAU,CAAC,sCAAsC,CAAC,CAAC;IAErF,IAAI,gBAAgB,IAAI,aAAa,EAAE,CAAC;QACtC,OAAO;YACL,YAAY,EAAE,CAAC;YACf,iBAAiB,EAAE,CAAC;YACpB,aAAa,EAAE,CAAC;YAChB,eAAe,EAAE,CAAC;YAClB,aAAa,EAAE,CAAC;YAChB,iBAAiB,EAAE,CAAC;YACpB,aAAa,EAAE,CAAC;YAChB,iBAAiB,EAAE,CAAC;SACrB,CAAC;IACJ,CAAC;IAED,oBAAoB;IACpB,MAAM,YAAY,GAAG,aAAa,GAAG,YAAY,CAAC;IAElD,IAAI,YAAY,IAAI,CAAC,EAAE,CAAC;QACtB,OAAO;YACL,YAAY,EAAE,OAAO,CAAC,YAAY,EAAE,CAAC,CAAC;YACtC,iBAAiB,EAAE,CAAC;YACpB,aAAa,EAAE,CAAC;YAChB,eAAe,EAAE,CAAC;YAClB,aAAa,EAAE,CAAC;YAChB,iBAAiB,EAAE,CAAC;YACpB,aAAa,EAAE,CAAC;YAChB,iBAAiB,EAAE,CAAC;SACrB,CAAC;IACJ,CAAC;IAED,6DAA6D;IAC7D,MAAM,CAAC,GAAG,CAAC,aAAa,GAAG,YAAY,CAAC,GAAG,CAAC,CAAC,CAAC,KAAK;IACnD,MAAM,GAAG,GAAG,gBAAgB,CAAC,CAAC,KAAK;IAEnC,0CAA0C;IAC1C,MAAM,CAAC,GAAG,aAAa,GAAG,IAAI,CAAC,CAAC,MAAM;IAEtC,gEAAgE;IAChE,uCAAuC;IACvC,MAAM,IAAI,GAAG,CAAC,GAAG,CAAC,CAAC;IACnB,MAAM,MAAM,GAAG,GAAG,GAAG,GAAG,CAAC;IACzB,MAAM,CAAC,GAAG,CAAC,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,MAAM,GAAG,IAAI,CAAC,GAAG,YAAY,CAAC;IAE3D,2BAA2B;IAC3B,0BAA0B;IAC1B,MAAM,iBAAiB,GAAG,CAAC,YAAY,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC;IAEvD,qBAAqB;IACrB,0BAA0B;IAC1B,MAAM,aAAa,GAAG,IAAI,CAAC,EAAE,GAAG,CAAC,GAAG,aAAa,GAAG,iBAAiB,GAAG,mBAAmB,CAAC;IAE5F,6DAA6D;IAC7D,MAAM,iBAAiB,GAAG,aAAa,CAAC;IAExC,uBAAuB;IACvB,gCAAgC;IAChC,mEAAmE;IACnE,MAAM,aAAa,GAAG,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,GAAG,aAAa,GAAG,iBAAiB,GAAG,mBAAmB,CAAC,GAAG,CAAC,GAAG,IAAI,CAAC;IAE7G,4CAA4C;IAC5C,kDAAkD;IAClD,MAAM,aAAa,GAAG,iBAAiB,GAAG,CAAC,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,MAAM,GAAG,IAAI,CAAC,CAAC;IAE5E,6DAA6D;IAC7D,MAAM,iBAAiB,GAAG,CAAC,iBAAiB,CAAC;IAE7C,OAAO;QACL,YAAY,EAAE,OAAO,CAAC,YAAY,EAAE,CAAC,CAAC;QACtC,iBAAiB,EAAE,OAAO,CAAC,iBAAiB,EAAE,CAAC,CAAC;QAChD,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,eAAe,EAAE,OAAO,CAAC,aAAa,GAAG,IAAI,EAAE,CAAC,CAAC;QACjD,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,iBAAiB,EAAE,OAAO,CAAC,iBAAiB,EAAE,CAAC,CAAC;QAChD,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,iBAAiB,EAAE,OAAO,CAAC,iBAAiB,EAAE,CAAC,CAAC;KACjD,CAAC;AACJ,CAAC"}
+{"version":3,"file":"pressFit.js","sourceRoot":"","sources":["../../src/metal/pressFit.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,OAAO,EAAE,MAAM,aAAa,CAAC;AAGtC;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA6BG;AACH,MAAM,UAAU,QAAQ,CAAC,KAAoB;IAC3C,8EAA8E;IAC9E,iEAAiE;IACjE,MAAM,EACJ,aAAa,EACb,YAAY,EACZ,gBAAgB,EAChB,aAAa,EACb,aAAa,EACb,mBAAmB,GACpB,GAAG,KAAK,CAAC;IAEV,kBAAkB;IAClB,IAAI,aAAa,IAAI,CAAC;QAAE,MAAM,IAAI,UAAU,CAAC,sCAAsC,CAAC,CAAC;IACrF,IAAI,YAAY,IAAI,CAAC;QAAE,MAAM,IAAI,UAAU,CAAC,qCAAqC,CAAC,CAAC;IACnF,IAAI,gBAAgB,IAAI,CAAC;QAAE,MAAM,IAAI,UAAU,CAAC,yCAAyC,CAAC,CAAC;IAC3F,IAAI,aAAa,IAAI,CAAC;QAAE,MAAM,IAAI,UAAU,CAAC,sCAAsC,CAAC,CAAC;IAErF,IAAI,gBAAgB,IAAI,aAAa,EAAE,CAAC;QACtC,OAAO;YACL,YAAY,EAAE,CAAC;YACf,iBAAiB,EAAE,CAAC;YACpB,aAAa,EAAE,CAAC;YAChB,eAAe,EAAE,CAAC;YAClB,aAAa,EAAE,CAAC;YAChB,iBAAiB,EAAE,CAAC;YACpB,aAAa,EAAE,CAAC;YAChB,iBAAiB,EAAE,CAAC;SACrB,CAAC;IACJ,CAAC;IAED,oBAAoB;IACpB,MAAM,YAAY,GAAG,aAAa,GAAG,YAAY,CAAC;IAElD,IAAI,YAAY,IAAI,CAAC,EAAE,CAAC;QACtB,OAAO;YACL,YAAY,EAAE,OAAO,CAAC,YAAY,EAAE,CAAC,CAAC;YACtC,iBAAiB,EAAE,CAAC;YACpB,aAAa,EAAE,CAAC;YAChB,eAAe,EAAE,CAAC;YAClB,aAAa,EAAE,CAAC;YAChB,iBAAiB,EAAE,CAAC;YACpB,aAAa,EAAE,CAAC;YAChB,iBAAiB,EAAE,CAAC;SACrB,CAAC;IACJ,CAAC;IAED,6DAA6D;IAC7D,MAAM,CAAC,GAAG,CAAC,aAAa,GAAG,YAAY,CAAC,GAAG,CAAC,CAAC,CAAC,KAAK;IACnD,MAAM,GAAG,GAAG,gBAAgB,CAAC,CAAC,KAAK;IAEnC,0CAA0C;IAC1C,MAAM,CAAC,GAAG,aAAa,GAAG,IAAI,CAAC,CAAC,MAAM;IAEtC,0EAA0E;IAC1E,sCAAsC;IACtC,iFAAiF;IACjF,4EAA4E;IAC5E,MAAM,IAAI,GAAG,CAAC,GAAG,CAAC,CAAC;IACnB,MAAM,MAAM,GAAG,GAAG,GAAG,GAAG,CAAC;IACzB,MAAM,CAAC,GAAG,CAAC,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC;IAEhD,2BAA2B;IAC3B,0BAA0B;IAC1B,MAAM,iBAAiB,GAAG,CAAC,YAAY,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC;IAEvD,qBAAqB;IACrB,0BAA0B;IAC1B,MAAM,aAAa,GAAG,IAAI,CAAC,EAAE,GAAG,CAAC,GAAG,aAAa,GAAG,iBAAiB,GAAG,mBAAmB,CAAC;IAE5F,6DAA6D;IAC7D,MAAM,iBAAiB,GAAG,aAAa,CAAC;IAExC,uBAAuB;IACvB,gCAAgC;IAChC,mEAAmE;IACnE,MAAM,aAAa,GAAG,CAAC,IAAI,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,GAAG,aAAa,GAAG,iBAAiB,GAAG,mBAAmB,CAAC,GAAG,CAAC,GAAG,IAAI,CAAC;IAE7G,4CAA4C;IAC5C,kDAAkD;IAClD,MAAM,aAAa,GAAG,iBAAiB,GAAG,CAAC,MAAM,GAAG,IAAI,CAAC,GAAG,CAAC,MAAM,GAAG,IAAI,CAAC,CAAC;IAE5E,6DAA6D;IAC7D,MAAM,iBAAiB,GAAG,CAAC,iBAAiB,CAAC;IAE7C,OAAO;QACL,YAAY,EAAE,OAAO,CAAC,YAAY,EAAE,CAAC,CAAC;QACtC,iBAAiB,EAAE,OAAO,CAAC,iBAAiB,EAAE,CAAC,CAAC;QAChD,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,eAAe,EAAE,OAAO,CAAC,aAAa,GAAG,IAAI,EAAE,CAAC,CAAC;QACjD,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,iBAAiB,EAAE,OAAO,CAAC,iBAAiB,EAAE,CAAC,CAAC;QAChD,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,iBAAiB,EAAE,OAAO,CAAC,iBAAiB,EAAE,CAAC,CAAC;KACjD,CAAC;AACJ,CAAC"}

package/dist/metal/types.d.ts

@@ -567,6 +567,31 @@ export interface WeldingResult {
     };
     notes: string[];
 }
+/**
+ * Weld Strength Types
+ *
+ * Filler-metal electrode classification. The numeric part is the minimum tensile
+ * strength of the deposited weld metal in ksi (E70 = 70 ksi). {@link weldStrength}
+ * maps each to an SI value; see FEXX table in weldStrength.ts.
+ */
+export type WeldElectrodeClass = 'E60' | 'E70' | 'E80' | 'E90' | 'E100' | 'E110';
+export interface WeldStrengthInput {
+    legSize: number;
+    weldLength: number;
+    weldCount?: number;
+    electrode: WeldElectrodeClass;
+    appliedLoad: number;
+}
+export interface WeldStrengthResult {
+    throat: number;
+    effectiveArea: number;
+    allowableShearStress: number;
+    allowableLoad: number;
+    actualStress: number;
+    utilization: number;
+    minRequiredLeg: number;
+    isSafe: boolean;
+}
 /**
  * Material Grade Converter Types
  */

package/dist/metal/types.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"types.d.ts","sourceRoot":"","sources":["../../src/metal/types.ts"],"names":[],"mappings":"AAAA;;GAEG;AACH,MAAM,MAAM,UAAU,GAAG,OAAO,GAAG,OAAO,GAAG,MAAM,GAAG,OAAO,CAAC;AAC9D,MAAM,MAAM,YAAY,GAAG,OAAO,GAAG,cAAc,GAAG,UAAU,GAAG,QAAQ,GAAG,OAAO,GAAG,UAAU,CAAC;AAEnG,UAAU,eAAe;IACvB,MAAM,EAAE,MAAM,CAAC;IACf,YAAY,EAAE,YAAY,CAAC;CAC5B;AAED,MAAM,MAAM,gBAAgB,GAAG,eAAe,GAAG,CAC7C;IAAE,KAAK,EAAE,OAAO,CAAC;IAAC,KAAK,EAAE,MAAM,CAAC;IAAC,SAAS,EAAE,MAAM,CAAA;CAAE,GACpD;IAAE,KAAK,EAAE,OAAO,CAAC;IAAC,QAAQ,EAAE,MAAM,CAAA;CAAE,GACpC;IAAE,KAAK,EAAE,MAAM,CAAC;IAAC,aAAa,EAAE,MAAM,CAAC;IAAC,aAAa,EAAE,MAAM,CAAA;CAAE,GAC/D;IAAE,KAAK,EAAE,OAAO,CAAC;IAAC,KAAK,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAC;IAAC,SAAS,EAAE,MAAM,CAAA;CAAE,CACvE,CAAC;AAEF,MAAM,WAAW,iBAAiB;IAChC,MAAM,EAAE,MAAM,CAAC;IACf,MAAM,EAAE,MAAM,CAAC;IACf,OAAO,EAAE,MAAM,CAAC;CACjB;AAED;;GAEG;AACH,MAAM,MAAM,eAAe,GAAG,WAAW,GAAG,cAAc,GAAG,cAAc,GAAG,cAAc,GAAG,QAAQ,CAAC;AACxG,MAAM,MAAM,SAAS,GAAG,QAAQ,GAAG,QAAQ,CAAC;AAE5C,MAAM,WAAW,kBAAkB;IACjC,SAAS,EAAE,MAAM,CAAC;IAClB,SAAS,EAAE,MAAM,CAAC;IAClB,YAAY,EAAE,MAAM,CAAC;IACrB,OAAO,CAAC,EAAE,MAAM,CAAC;IACjB,QAAQ,CAAC,EAAE,eAAe,CAAC;CAC5B;AAED,MAAM,WAAW,mBAAmB;IAClC,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,cAAc,EAAE,MAAM,CAAC;IACvB,OAAO,EAAE,MAAM,CAAC;IAChB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,QAAQ,EAAE,MAAM,EAAE,CAAC;CACpB;AAED,MAAM,WAAW,eAAe;IAC9B,SAAS,EAAE,MAAM,CAAC;IAClB,UAAU,EAAE,MAAM,CAAC;IACnB,SAAS,EAAE,MAAM,CAAC;IAClB,QAAQ,CAAC,EAAE,eAAe,CAAC;IAC3B,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,cAAc,CAAC,EAAE,MAAM,CAAC;CACzB;AAED,MAAM,WAAW,gBAAgB;IAC/B,gBAAgB,EAAE,MAAM,CAAC;IACzB,WAAW,EAAE,MAAM,CAAC;IACpB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,kBAAkB,EAAE,OAAO,CAAC;IAC5B,aAAa,EAAE,OAAO,CAAC;IACvB,aAAa,EAAE,MAAM,CAAC;IACtB,cAAc,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,gBAAgB;IAC/B,SAAS,EAAE,SAAS,CAAC;IACrB,SAAS,EAAE,MAAM,CAAC;IAClB,SAAS,EAAE,MAAM,CAAC;IAClB,YAAY,EAAE,MAAM,CAAC;IACrB,OAAO,CAAC,EAAE,MAAM,CAAC;IACjB,QAAQ,CAAC,EAAE,eAAe,CAAC;IAC3B,OAAO,EAAE,MAAM,CAAC;IAChB,OAAO,EAAE,MAAM,CAAC;IAChB,OAAO,CAAC,EAAE,MAAM,CAAC;CAClB;AAED,MAAM,WAAW,iBAAiB;IAChC,UAAU,EAAE,MAAM,CAAC;IACnB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,OAAO,EAAE,MAAM,CAAC;CACjB;AAED,MAAM,WAAW,mBAAmB;IAClC,SAAS,EAAE,MAAM,CAAC;IAClB,SAAS,EAAE,MAAM,CAAC;IAClB,YAAY,EAAE,MAAM,CAAC;IACrB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,IAAI,EAAE,MAAM,CAAC;IACb,IAAI,EAAE,MAAM,CAAC;CACd;AAED,MAAM,WAAW,oBAAoB;IACnC,OAAO,EAAE,MAAM,CAAC;CACjB;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,UAAU,GAAG,SAAS,GAAG,SAAS,GAAG,UAAU,CAAC;AAC7E,MAAM,MAAM,QAAQ,GAAG,KAAK,GAAG,WAAW,GAAG,SAAS,CAAC;AAEvD,MAAM,WAAW,iBAAiB;IAChC,SAAS,EAAE,cAAc,CAAC;IAC1B,SAAS,EAAE,MAAM,CAAC;IAClB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,CAAC,EAAE,MAAM,CAAC;IAEtB,gBAAgB,CAAC,EAAE,MAAM,CAAC;IAE1B,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,QAAQ,CAAC,EAAE,QAAQ,CAAC;IAEpB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,mBAAmB,CAAC,EAAE,MAAM,CAAC;IAC7B,mBAAmB,CAAC,EAAE,MAAM,CAAC;IAC7B,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,gBAAgB,CAAC,EAAE,MAAM,CAAC;IAE1B,UAAU,CAAC,EAAE,cAAc,EAAE,CAAC;CAC/B;AAED,MAAM,WAAW,kBAAkB;IACjC,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IACrB,YAAY,EAAE,MAAM,CAAC;IACrB,gBAAgB,EAAE,MAAM,CAAC;IACzB,UAAU,EAAE,MAAM,CAAC;IACnB,gBAAgB,EAAE,MAAM,CAAC;IACzB,SAAS,EAAE,MAAM,CAAC;IAClB,aAAa,EAAE,MAAM,CAAC;IACtB,SAAS,EAAE;QACT,SAAS,EAAE,MAAM,CAAC;QAClB,KAAK,EAAE,MAAM,CAAC;KACf,EAAE,CAAC;IACJ,QAAQ,EAAE,MAAM,EAAE,CAAC;CACpB;AAGD;;GAEG;AACH,MAAM,MAAM,WAAW,GAAG,MAAM,GAAG,QAAQ,CAAC;AAE5C,MAAM,WAAW,YAAY;IAC3B,WAAW,EAAE,WAAW,CAAC;IACzB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,cAAc,EAAE,MAAM,CAAC;IACvB,GAAG,EAAE,MAAM,CAAC;CACb;AAED,MAAM,WAAW,aAAa;IAC5B,GAAG,EAAE,MAAM,CAAC;IACZ,IAAI,EAAE,MAAM,CAAC;IACb,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,MAAM,mBAAmB,GAAG,iBAAiB,GAAG,iBAAiB,CAAC;AACxE,MAAM,MAAM,oBAAoB,GAAG,KAAK,GAAG,OAAO,GAAG,MAAM,GAAG,MAAM,GAAG,QAAQ,CAAC;AAEhF,UAAU,QAAQ;IAChB,QAAQ,EAAE,MAAM,CAAC;IACjB,KAAK,EAAE,MAAM,CAAC;IACd,OAAO,EAAE,MAAM,CAAC;IAChB,eAAe,EAAE,MAAM,CAAC;CACzB;AAED,MAAM,MAAM,SAAS,GAAG,QAAQ,GAAG,CAC/B;IAAE,IAAI,EAAE,iBAAiB,CAAC;IAAC,MAAM,EAAE,MAAM,CAAA;CAAE,GAC3C;IAAE,IAAI,EAAE,iBAAiB,CAAC;IAAC,OAAO,EAAE,MAAM,CAAA;CAAE,CAC/C,CAAC;AAEF,MAAM,WAAW,UAAU;IACzB,MAAM,EAAE,MAAM,CAAC;IACf,OAAO,EAAE,MAAM,CAAC;IAChB,QAAQ,EAAE,MAAM,CAAC;IACjB,UAAU,EAAE,MAAM,CAAC;IACnB,aAAa,EAAE,MAAM,CAAC;IACtB,mBAAmB,EAAE,MAAM,CAAC;IAC5B,OAAO,EAAE,MAAM,CAAC;IAChB,qBAAqB,EAAE,MAAM,CAAC;CAC/B;AAED;;GAEG;AACH,MAAM,MAAM,gBAAgB,GAAG,SAAS,GAAG,SAAS,GAAG,UAAU,CAAC;AAElE,MAAM,WAAW,YAAY;IAC3B,SAAS,EAAE,gBAAgB,CAAC;IAC5B,YAAY,EAAE,MAAM,CAAC;IACrB,YAAY,EAAE,MAAM,CAAC;IACrB,YAAY,CAAC,EAAE,MAAM,CAAC;IACtB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,UAAU,CAAC,EAAE,MAAM,CAAC;CACrB;AAED,MAAM,WAAW,aAAa;IAC5B,GAAG,EAAE,MAAM,CAAC;IACZ,QAAQ,EAAE,MAAM,CAAC;IACjB,GAAG,EAAE,MAAM,CAAC;CACb;AAED;;GAEG;AACH,MAAM,MAAM,gBAAgB,GAAG,KAAK,GAAG,KAAK,CAAC;AAE7C,MAAM,WAAW,YAAY;IAC3B,MAAM,EAAE,MAAM,CAAC;IACf,QAAQ,EAAE,MAAM,CAAC;IACjB,KAAK,CAAC,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,iBAAiB;IAChC,WAAW,EAAE,MAAM,CAAC;IACpB,IAAI,EAAE,MAAM,CAAC;IACb,MAAM,EAAE,YAAY,EAAE,CAAC;IACvB,SAAS,EAAE,gBAAgB,CAAC;CAC7B;AAED,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE;QAAE,MAAM,EAAE,MAAM,CAAC;QAAC,KAAK,EAAE,MAAM,CAAA;KAAE,EAAE,CAAC;IAC5C,UAAU,EAAE,MAAM,CAAC;IACnB,KAAK,EAAE,MAAM,CAAC;IACd,YAAY,EAAE,MAAM,CAAC;CACtB;AAED,MAAM,WAAW,kBAAkB;IACjC,UAAU,EAAE,MAAM,CAAC;IACnB,UAAU,EAAE,MAAM,CAAC;IACnB,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IACrB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,QAAQ,EAAE,cAAc,EAAE,CAAC;CAC5B;AAED;;GAEG;AACH,MAAM,MAAM,mBAAmB,GAAG,YAAY,GAAG,mBAAmB,CAAC;AAErE,MAAM,WAAW,SAAS;IACxB,IAAI,EAAE,mBAAmB,CAAC;IAC1B,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,aAAa,CAAC,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,UAAU;IACzB,MAAM,EAAE,MAAM,CAAC;IACf,cAAc,EAAE,MAAM,CAAC;IACvB,cAAc,CAAC,EAAE,MAAM,CAAC;IACxB,cAAc,CAAC,EAAE,MAAM,CAAC;IACxB,QAAQ,EAAE,MAAM,CAAC;IACjB,QAAQ,EAAE,MAAM,CAAC;IACjB,aAAa,EAAE,MAAM,CAAC;IACtB,mBAAmB,EAAE,MAAM,CAAC;CAC7B;AAED;;GAEG;AACH,MAAM,MAAM,aAAa,GAAG,KAAK,GAAG,IAAI,GAAG,IAAI,GAAG,OAAO,CAAC;AAE1D,MAAM,WAAW,aAAa;IAC5B,SAAS,EAAE,aAAa,CAAC;IACzB,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,cAAc;IAC7B,GAAG,EAAE,MAAM,CAAC;IACZ,EAAE,EAAE,MAAM,CAAC;IACX,EAAE,EAAE,MAAM,CAAC;IACX,KAAK,EAAE,MAAM,CAAC;IACd,eAAe,EAAE,OAAO,CAAC;CAG1B;AAED;;GAEG;AACH,MAAM,MAAM,gBAAgB,GAAG,OAAO,GAAG,WAAW,GAAG,UAAU,GAAG,QAAQ,GAAG,UAAU,CAAC;AAE1F,MAAM,WAAW,aAAa;IAC5B,QAAQ,EAAE,gBAAgB,CAAC;IAC3B,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,cAAc;IAC7B,KAAK,EAAE,MAAM,CAAC;IACd,QAAQ,EAAE,MAAM,CAAC;IACjB,OAAO,EAAE,MAAM,CAAC;IAChB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,UAAU,EAAE,MAAM,CAAC;IACnB,QAAQ,EAAE,MAAM,CAAC;IACjB,mBAAmB,EAAE,MAAM,CAAC;IAC5B,YAAY,EAAE,MAAM,CAAC;CACtB;AAED,MAAM,WAAW,YAAY;IAC3B,OAAO,EAAE,MAAM,CAAC;IAChB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,UAAU,EAAE,MAAM,CAAC;IACnB,QAAQ,EAAE,MAAM,CAAC;IACjB,mBAAmB,EAAE,MAAM,CAAC;IAC5B,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,WAAW,aAAa;IAC5B,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IACrB,gBAAgB,EAAE,MAAM,CAAC;IACzB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IACrB,mBAAmB,EAAE,MAAM,CAAC;CAC7B;AAED,MAAM,WAAW,cAAc;IAC7B,YAAY,EAAE,MAAM,CAAC;IACrB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,aAAa,EAAE,MAAM,CAAC;IACtB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,aAAa,EAAE,MAAM,CAAC;IACtB,iBAAiB,EAAE,MAAM,CAAC;CAC3B;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,IAAI,GAAG,IAAI,GAAG,GAAG,CAAC;AAE/C,MAAM,WAAW,cAAc;IAC7B,SAAS,EAAE,cAAc,CAAC;IAC1B,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,eAAe;IAC9B,EAAE,EAAE,MAAM,CAAC;IACX,EAAE,EAAE,MAAM,CAAC;IACX,MAAM,EAAE,MAAM,CAAC;IACf,GAAG,EAAE,MAAM,CAAC;IACZ,eAAe,EAAE,OAAO,CAAC;CAK1B;AAED;;GAEG;AACH,MAAM,MAAM,SAAS,GAAG,QAAQ,GAAG,MAAM,CAAC;AAE1C,MAAM,WAAW,UAAU;IACzB,WAAW,EAAE,MAAM,CAAC;IACpB,SAAS,EAAE,SAAS,CAAC;CACtB;AAED,MAAM,WAAW,WAAW;IAC1B,WAAW,EAAE,MAAM,CAAC;IACpB,eAAe,EAAE,MAAM,CAAC;IACxB,KAAK,EAAE,MAAM,CAAC;IACd,aAAa,EAAE,MAAM,CAAC;IACtB,QAAQ,EAAE,MAAM,CAAC;IACjB,cAAc,EAAE,MAAM,CAAC;IACvB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED,MAAM,WAAW,SAAS;IACxB,OAAO,EAAE,MAAM,CAAC;IAChB,WAAW,EAAE,MAAM,CAAC;IACpB,SAAS,EAAE,MAAM,CAAC;IAClB,cAAc,EAAE,MAAM,CAAC;IACvB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,WAAW,GAAG,cAAc,GAAG,gBAAgB,GAAG,iBAAiB,CAAC;AAEjG,MAAM,WAAW,WAAW;IAC1B,YAAY,EAAE,MAAM,CAAC;IACrB,gBAAgB,EAAE,MAAM,CAAC;IACzB,WAAW,EAAE,MAAM,CAAC;IACpB,KAAK,CAAC,EAAE,MAAM,CAAC;IACf,QAAQ,CAAC,EAAE,cAAc,CAAC;CAC3B;AAED,MAAM,WAAW,YAAY;IAC3B,UAAU,EAAE,MAAM,CAAC;IACnB,WAAW,EAAE,MAAM,CAAC;IACpB,sBAAsB,EAAE,MAAM,CAAC;IAC/B,WAAW,CAAC,EAAE,MAAM,CAAC;IACrB,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,QAAQ,GAAG,KAAK,GAAG,KAAK,CAAC;AAEtD,MAAM,WAAW,QAAQ;IACvB,QAAQ,EAAE,cAAc,CAAC;IACzB,aAAa,EAAE,MAAM,CAAC;IACtB,KAAK,EAAE,MAAM,CAAC;IACd,gBAAgB,CAAC,EAAE,MAAM,CAAC;CAC3B;AAED,MAAM,WAAW,SAAS;IACxB,YAAY,EAAE,MAAM,CAAC;IACrB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,gBAAgB,EAAE,MAAM,CAAC;IACzB,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,MAAM,UAAU,GAAG,QAAQ,GAAG,SAAS,CAAC;AAE9C,MAAM,WAAW,WAAW;IAC1B,IAAI,EAAE,UAAU,CAAC;IACjB,IAAI,EAAE,MAAM,CAAC;CACd;AAED,MAAM,WAAW,YAAY;IAC3B,IAAI,EAAE,MAAM,CAAC;IACb,aAAa,EAAE,MAAM,CAAC;IACtB,KAAK,EAAE,MAAM,CAAC;IACd,QAAQ,EAAE,MAAM,CAAC;IACjB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED,MAAM,WAAW,UAAU;IACzB,aAAa,EAAE,MAAM,CAAC;IACtB,KAAK,EAAE,MAAM,CAAC;IACd,QAAQ,EAAE,MAAM,CAAC;IACjB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED;;GAEG;AACH,MAAM,MAAM,OAAO,GAAG,MAAM,GAAG,OAAO,CAAC;AAEvC,MAAM,WAAW,cAAc;IAC7B,WAAW,EAAE,MAAM,CAAC;IACpB,OAAO,EAAE,OAAO,CAAC;IACjB,eAAe,EAAE,MAAM,CAAC;IACxB,OAAO,EAAE,MAAM,CAAC;CACjB;AAED,MAAM,WAAW,eAAe;IAC9B,WAAW,EAAE,MAAM,CAAC;IACpB,cAAc,EAAE,MAAM,CAAC;IACvB,cAAc,EAAE,MAAM,CAAC;IACvB,OAAO,EAAE,MAAM,CAAC;IAChB,OAAO,EAAE,MAAM,CAAC;IAChB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED;;GAEG;AACH,MAAM,MAAM,eAAe,GAAG,YAAY,GAAG,iBAAiB,GAAG,WAAW,GAAG,YAAY,CAAC;AAC5F,MAAM,MAAM,YAAY,GAAG,aAAa,GAAG,UAAU,GAAG,QAAQ,CAAC;AACjE,MAAM,MAAM,iBAAiB,GAAG,OAAO,GAAG,WAAW,GAAG,UAAU,GAAG,QAAQ,GAAG,UAAU,GAAG,QAAQ,CAAC;AAEtG,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE,eAAe,CAAC;IACxB,QAAQ,EAAE,iBAAiB,CAAC;IAC5B,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,YAAY,CAAC,EAAE,YAAY,CAAC;IAC5B,KAAK,CAAC,EAAE,MAAM,CAAC;IACf,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,QAAQ,CAAC,EAAE,MAAM,CAAC;IAClB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,QAAQ,CAAC,EAAE,MAAM,CAAC;IAClB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,cAAc,CAAC,EAAE,MAAM,CAAC;IACxB,IAAI,CAAC,EAAE,MAAM,CAAC;IACd,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,OAAO,CAAC,EAAE,MAAM,CAAC;IACjB,YAAY,CAAC,EAAE,MAAM,CAAC;CACvB;AAED,MAAM,WAAW,aAAa;IAC5B,IAAI,EAAE,MAAM,CAAC;IACb,SAAS,EAAE,MAAM,CAAC;IAClB,gBAAgB,EAAE,MAAM,CAAC;IACzB,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,eAAe;IAC9B,WAAW,EAAE,aAAa,EAAE,CAAC;IAC7B,eAAe,EAAE,MAAM,CAAC;IACxB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,aAAa,EAAE;QACb,CAAC,EAAE,MAAM,CAAC;QACV,GAAG,EAAE,MAAM,CAAC;QACZ,CAAC,CAAC,EAAE,MAAM,CAAC;KACZ,CAAC;CACH;AAED;;GAEG;AACH,MAAM,MAAM,WAAW,GAAG,MAAM,GAAG,MAAM,GAAG,MAAM,GAAG,KAAK,CAAC;AAC3D,MAAM,MAAM,aAAa,GAAG,WAAW,GAAG,eAAe,GAAG,gBAAgB,GAAG,UAAU,CAAC;AAC1F,MAAM,MAAM,YAAY,GAAG,KAAK,GAAG,UAAU,GAAG,MAAM,GAAG,UAAU,CAAC;AAEpE;;;GAGG;AACH,MAAM,MAAM,qBAAqB,GAAG,UAAU,GAAG,aAAa,GAAG,qBAAqB,CAAC;AAEvF;;;;GAIG;AACH,MAAM,MAAM,sBAAsB,GAC9B,SAAS,GACT,aAAa,GACb,aAAa,GACb,mBAAmB,GACnB,eAAe,GACf,wBAAwB,GACxB,oBAAoB,GACpB,MAAM,GACN,iBAAiB,GACjB,mBAAmB,GACnB,oBAAoB,GACpB,iBAAiB,GACjB,kBAAkB,GAClB,cAAc,GACd,gBAAgB,CAAC;AAErB;;;GAGG;AACH,MAAM,WAAW,kBAAkB;IACjC,IAAI,EAAE,sBAAsB,CAAC;IAC7B,MAAM,EAAE,MAAM,CAAC,MAAM,EAAE,MAAM,GAAG,MAAM,CAAC,CAAC;CACzC;AAED,MAAM,WAAW,aAAa;IAC5B,OAAO,EAAE,WAAW,CAAC;IACrB,OAAO,EAAE,MAAM,CAAC;IAChB,OAAO,EAAE,MAAM,CAAC;IAChB,WAAW,EAAE,MAAM,CAAC;IACpB,SAAS,EAAE,aAAa,CAAC;IACzB,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,QAAQ,CAAC,EAAE,MAAM,CAAC;IAClB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,QAAQ,CAAC,EAAE,MAAM,CAAC;IAClB,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,OAAO,CAAC,EAAE,MAAM,CAAC;IACjB,SAAS,EAAE,MAAM,CAAC;CACnB;AAED,MAAM,WAAW,cAAc;IAC7B,SAAS,EAAE,MAAM,CAAC;IAClB,UAAU,EAAE,MAAM,CAAC;IACnB,gBAAgB,EAAE,MAAM,CAAC;IACzB,mBAAmB,EAAE,MAAM,CAAC;IAC5B,eAAe,EAAE,MAAM,CAAC;IACxB,kBAAkB,EAAE,OAAO,CAAC;IAE5B,WAAW,EAAE,MAAM,CAAC;IACpB,WAAW,EAAE;QACX,GAAG,EAAE,MAAM,CAAC;QACZ,GAAG,EAAE,MAAM,CAAC;QACZ,MAAM,EAAE,MAAM,CAAC;QACf,UAAU,EAAE,qBAAqB,CAAC;KACnC,CAAC;IACF,aAAa,EAAE;QACb,GAAG,EAAE,MAAM,CAAC;QACZ,GAAG,EAAE,MAAM,CAAC;KACb,CAAC;IACF,cAAc,EAAE,MAAM,CAAC;IACvB,kBAAkB,EAAE,OAAO,CAAC;IAG5B,YAAY,EAAE,YAAY,CAAC;IAC3B,aAAa,EAAE,KAAK,GAAG,QAAQ,GAAG,MAAM,CAAC;IACzC,qCAAqC;IACrC,eAAe,EAAE,MAAM,EAAE,CAAC;IAC1B,+EAA+E;IAC/E,mBAAmB,EAAE,kBAAkB,EAAE,CAAC;CAC3C;AAED;;GAEG;AACH,MAAM,MAAM,gBAAgB,GAAG,WAAW,GAAG,eAAe,GAAG,gBAAgB,GAAG,UAAU,GAAG,UAAU,CAAC;AAC1G,MAAM,MAAM,SAAS,GAAG,MAAM,GAAG,QAAQ,GAAG,KAAK,GAAG,KAAK,CAAC;AAC1D,MAAM,MAAM,YAAY,GAAG,MAAM,GAAG,YAAY,GAAG,UAAU,GAAG,UAAU,CAAC;AAE3E,MAAM,WAAW,YAAY;IAC3B,SAAS,EAAE,gBAAgB,CAAC;IAC5B,SAAS,EAAE,SAAS,CAAC;IACrB,QAAQ,EAAE,YAAY,CAAC;IACvB,SAAS,EAAE,MAAM,CAAC;CACnB;AAED,MAAM,WAAW,UAAU;IACzB,WAAW,EAAE,MAAM,CAAC;IACpB,QAAQ,EAAE,MAAM,CAAC;IACjB,eAAe,EAAE,MAAM,CAAC;CACzB;AAED,MAAM,WAAW,aAAa;IAC5B,eAAe,EAAE,UAAU,EAAE,CAAC;IAC9B,WAAW,EAAE,MAAM,CAAC;IACpB,YAAY,EAAE;QAAE,GAAG,EAAE,MAAM,CAAC;QAAC,GAAG,EAAE,MAAM,CAAA;KAAE,CAAC;IAC3C,KAAK,EAAE,MAAM,EAAE,CAAC;CACjB;AAED;;GAEG;AACH,MAAM,MAAM,gBAAgB,GAAG,MAAM,GAAG,IAAI,GAAG,KAAK,GAAG,IAAI,GAAG,IAAI,CAAC;AAEnE,MAAM,WAAW,2BAA2B;IAC1C,QAAQ,EAAE,gBAAgB,CAAC;IAC3B,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,4BAA4B;IAC3C,IAAI,EAAE,MAAM,GAAG,IAAI,CAAC;IACpB,EAAE,EAAE,MAAM,GAAG,IAAI,CAAC;IAClB,GAAG,EAAE,MAAM,GAAG,IAAI,CAAC;IACnB,EAAE,EAAE,MAAM,GAAG,IAAI,CAAC;IAClB,EAAE,EAAE,MAAM,GAAG,IAAI,CAAC;IAClB,QAAQ,EAAE,MAAM,CAAC;IACjB,KAAK,EAAE,MAAM,CAAC;CACf;AAED;;GAEG;AACH,MAAM,MAAM,YAAY,GAAG,MAAM,GAAG,IAAI,CAAC;AACzC,MAAM,MAAM,YAAY,GAAG,MAAM,GAAG,OAAO,GAAG,OAAO,GAAG,OAAO,GAAG,QAAQ,GAAG,KAAK,CAAC;AAEnF,MAAM,WAAW,aAAa;IAC5B,QAAQ,EAAE,YAAY,CAAC;IACvB,WAAW,EAAE,MAAM,CAAC;IACpB,QAAQ,EAAE,YAAY,CAAC;CACxB;AAED,MAAM,WAAW,cAAc;IAC7B,WAAW,EAAE,MAAM,CAAC;IACpB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,cAAc,EAAE,MAAM,CAAC;IACvB,gBAAgB,EAAE,MAAM,CAAC;IACzB,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,YAAY,GAAG,WAAW,CAAC;AACxD,MAAM,MAAM,aAAa,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,MAAM,GAAG,MAAM,CAAC;AAE5E,MAAM,WAAW,eAAe;IAC9B,QAAQ,EAAE,cAAc,CAAC;IACzB,aAAa,EAAE,aAAa,CAAC;IAC7B,WAAW,EAAE,MAAM,CAAC;CACrB;AAED,MAAM,WAAW,gBAAgB;IAC/B,WAAW,EAAE,MAAM,CAAC;IACpB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,SAAS,EAAE,MAAM,CAAC;IAClB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,SAAS,EAAE,MAAM,CAAC;IAClB,QAAQ,EAAE,MAAM,CAAC;IACjB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,MAAM,EAAE,MAAM,CAAC;CAChB"}
+{"version":3,"file":"types.d.ts","sourceRoot":"","sources":["../../src/metal/types.ts"],"names":[],"mappings":"AAAA;;GAEG;AACH,MAAM,MAAM,UAAU,GAAG,OAAO,GAAG,OAAO,GAAG,MAAM,GAAG,OAAO,CAAC;AAC9D,MAAM,MAAM,YAAY,GAAG,OAAO,GAAG,cAAc,GAAG,UAAU,GAAG,QAAQ,GAAG,OAAO,GAAG,UAAU,CAAC;AAEnG,UAAU,eAAe;IACvB,MAAM,EAAE,MAAM,CAAC;IACf,YAAY,EAAE,YAAY,CAAC;CAC5B;AAED,MAAM,MAAM,gBAAgB,GAAG,eAAe,GAAG,CAC7C;IAAE,KAAK,EAAE,OAAO,CAAC;IAAC,KAAK,EAAE,MAAM,CAAC;IAAC,SAAS,EAAE,MAAM,CAAA;CAAE,GACpD;IAAE,KAAK,EAAE,OAAO,CAAC;IAAC,QAAQ,EAAE,MAAM,CAAA;CAAE,GACpC;IAAE,KAAK,EAAE,MAAM,CAAC;IAAC,aAAa,EAAE,MAAM,CAAC;IAAC,aAAa,EAAE,MAAM,CAAA;CAAE,GAC/D;IAAE,KAAK,EAAE,OAAO,CAAC;IAAC,KAAK,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAC;IAAC,SAAS,EAAE,MAAM,CAAA;CAAE,CACvE,CAAC;AAEF,MAAM,WAAW,iBAAiB;IAChC,MAAM,EAAE,MAAM,CAAC;IACf,MAAM,EAAE,MAAM,CAAC;IACf,OAAO,EAAE,MAAM,CAAC;CACjB;AAED;;GAEG;AACH,MAAM,MAAM,eAAe,GAAG,WAAW,GAAG,cAAc,GAAG,cAAc,GAAG,cAAc,GAAG,QAAQ,CAAC;AACxG,MAAM,MAAM,SAAS,GAAG,QAAQ,GAAG,QAAQ,CAAC;AAE5C,MAAM,WAAW,kBAAkB;IACjC,SAAS,EAAE,MAAM,CAAC;IAClB,SAAS,EAAE,MAAM,CAAC;IAClB,YAAY,EAAE,MAAM,CAAC;IACrB,OAAO,CAAC,EAAE,MAAM,CAAC;IACjB,QAAQ,CAAC,EAAE,eAAe,CAAC;CAC5B;AAED,MAAM,WAAW,mBAAmB;IAClC,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,cAAc,EAAE,MAAM,CAAC;IACvB,OAAO,EAAE,MAAM,CAAC;IAChB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,QAAQ,EAAE,MAAM,EAAE,CAAC;CACpB;AAED,MAAM,WAAW,eAAe;IAC9B,SAAS,EAAE,MAAM,CAAC;IAClB,UAAU,EAAE,MAAM,CAAC;IACnB,SAAS,EAAE,MAAM,CAAC;IAClB,QAAQ,CAAC,EAAE,eAAe,CAAC;IAC3B,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,cAAc,CAAC,EAAE,MAAM,CAAC;CACzB;AAED,MAAM,WAAW,gBAAgB;IAC/B,gBAAgB,EAAE,MAAM,CAAC;IACzB,WAAW,EAAE,MAAM,CAAC;IACpB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,kBAAkB,EAAE,OAAO,CAAC;IAC5B,aAAa,EAAE,OAAO,CAAC;IACvB,aAAa,EAAE,MAAM,CAAC;IACtB,cAAc,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,gBAAgB;IAC/B,SAAS,EAAE,SAAS,CAAC;IACrB,SAAS,EAAE,MAAM,CAAC;IAClB,SAAS,EAAE,MAAM,CAAC;IAClB,YAAY,EAAE,MAAM,CAAC;IACrB,OAAO,CAAC,EAAE,MAAM,CAAC;IACjB,QAAQ,CAAC,EAAE,eAAe,CAAC;IAC3B,OAAO,EAAE,MAAM,CAAC;IAChB,OAAO,EAAE,MAAM,CAAC;IAChB,OAAO,CAAC,EAAE,MAAM,CAAC;CAClB;AAED,MAAM,WAAW,iBAAiB;IAChC,UAAU,EAAE,MAAM,CAAC;IACnB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,OAAO,EAAE,MAAM,CAAC;CACjB;AAED,MAAM,WAAW,mBAAmB;IAClC,SAAS,EAAE,MAAM,CAAC;IAClB,SAAS,EAAE,MAAM,CAAC;IAClB,YAAY,EAAE,MAAM,CAAC;IACrB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,IAAI,EAAE,MAAM,CAAC;IACb,IAAI,EAAE,MAAM,CAAC;CACd;AAED,MAAM,WAAW,oBAAoB;IACnC,OAAO,EAAE,MAAM,CAAC;CACjB;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,UAAU,GAAG,SAAS,GAAG,SAAS,GAAG,UAAU,CAAC;AAC7E,MAAM,MAAM,QAAQ,GAAG,KAAK,GAAG,WAAW,GAAG,SAAS,CAAC;AAEvD,MAAM,WAAW,iBAAiB;IAChC,SAAS,EAAE,cAAc,CAAC;IAC1B,SAAS,EAAE,MAAM,CAAC;IAClB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,CAAC,EAAE,MAAM,CAAC;IAEtB,gBAAgB,CAAC,EAAE,MAAM,CAAC;IAE1B,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,QAAQ,CAAC,EAAE,QAAQ,CAAC;IAEpB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,mBAAmB,CAAC,EAAE,MAAM,CAAC;IAC7B,mBAAmB,CAAC,EAAE,MAAM,CAAC;IAC7B,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,gBAAgB,CAAC,EAAE,MAAM,CAAC;IAE1B,UAAU,CAAC,EAAE,cAAc,EAAE,CAAC;CAC/B;AAED,MAAM,WAAW,kBAAkB;IACjC,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IACrB,YAAY,EAAE,MAAM,CAAC;IACrB,gBAAgB,EAAE,MAAM,CAAC;IACzB,UAAU,EAAE,MAAM,CAAC;IACnB,gBAAgB,EAAE,MAAM,CAAC;IACzB,SAAS,EAAE,MAAM,CAAC;IAClB,aAAa,EAAE,MAAM,CAAC;IACtB,SAAS,EAAE;QACT,SAAS,EAAE,MAAM,CAAC;QAClB,KAAK,EAAE,MAAM,CAAC;KACf,EAAE,CAAC;IACJ,QAAQ,EAAE,MAAM,EAAE,CAAC;CACpB;AAGD;;GAEG;AACH,MAAM,MAAM,WAAW,GAAG,MAAM,GAAG,QAAQ,CAAC;AAE5C,MAAM,WAAW,YAAY;IAC3B,WAAW,EAAE,WAAW,CAAC;IACzB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,cAAc,EAAE,MAAM,CAAC;IACvB,GAAG,EAAE,MAAM,CAAC;CACb;AAED,MAAM,WAAW,aAAa;IAC5B,GAAG,EAAE,MAAM,CAAC;IACZ,IAAI,EAAE,MAAM,CAAC;IACb,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,MAAM,mBAAmB,GAAG,iBAAiB,GAAG,iBAAiB,CAAC;AACxE,MAAM,MAAM,oBAAoB,GAAG,KAAK,GAAG,OAAO,GAAG,MAAM,GAAG,MAAM,GAAG,QAAQ,CAAC;AAEhF,UAAU,QAAQ;IAChB,QAAQ,EAAE,MAAM,CAAC;IACjB,KAAK,EAAE,MAAM,CAAC;IACd,OAAO,EAAE,MAAM,CAAC;IAChB,eAAe,EAAE,MAAM,CAAC;CACzB;AAED,MAAM,MAAM,SAAS,GAAG,QAAQ,GAAG,CAC/B;IAAE,IAAI,EAAE,iBAAiB,CAAC;IAAC,MAAM,EAAE,MAAM,CAAA;CAAE,GAC3C;IAAE,IAAI,EAAE,iBAAiB,CAAC;IAAC,OAAO,EAAE,MAAM,CAAA;CAAE,CAC/C,CAAC;AAEF,MAAM,WAAW,UAAU;IACzB,MAAM,EAAE,MAAM,CAAC;IACf,OAAO,EAAE,MAAM,CAAC;IAChB,QAAQ,EAAE,MAAM,CAAC;IACjB,UAAU,EAAE,MAAM,CAAC;IACnB,aAAa,EAAE,MAAM,CAAC;IACtB,mBAAmB,EAAE,MAAM,CAAC;IAC5B,OAAO,EAAE,MAAM,CAAC;IAChB,qBAAqB,EAAE,MAAM,CAAC;CAC/B;AAED;;GAEG;AACH,MAAM,MAAM,gBAAgB,GAAG,SAAS,GAAG,SAAS,GAAG,UAAU,CAAC;AAElE,MAAM,WAAW,YAAY;IAC3B,SAAS,EAAE,gBAAgB,CAAC;IAC5B,YAAY,EAAE,MAAM,CAAC;IACrB,YAAY,EAAE,MAAM,CAAC;IACrB,YAAY,CAAC,EAAE,MAAM,CAAC;IACtB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,UAAU,CAAC,EAAE,MAAM,CAAC;CACrB;AAED,MAAM,WAAW,aAAa;IAC5B,GAAG,EAAE,MAAM,CAAC;IACZ,QAAQ,EAAE,MAAM,CAAC;IACjB,GAAG,EAAE,MAAM,CAAC;CACb;AAED;;GAEG;AACH,MAAM,MAAM,gBAAgB,GAAG,KAAK,GAAG,KAAK,CAAC;AAE7C,MAAM,WAAW,YAAY;IAC3B,MAAM,EAAE,MAAM,CAAC;IACf,QAAQ,EAAE,MAAM,CAAC;IACjB,KAAK,CAAC,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,iBAAiB;IAChC,WAAW,EAAE,MAAM,CAAC;IACpB,IAAI,EAAE,MAAM,CAAC;IACb,MAAM,EAAE,YAAY,EAAE,CAAC;IACvB,SAAS,EAAE,gBAAgB,CAAC;CAC7B;AAED,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE;QAAE,MAAM,EAAE,MAAM,CAAC;QAAC,KAAK,EAAE,MAAM,CAAA;KAAE,EAAE,CAAC;IAC5C,UAAU,EAAE,MAAM,CAAC;IACnB,KAAK,EAAE,MAAM,CAAC;IACd,YAAY,EAAE,MAAM,CAAC;CACtB;AAED,MAAM,WAAW,kBAAkB;IACjC,UAAU,EAAE,MAAM,CAAC;IACnB,UAAU,EAAE,MAAM,CAAC;IACnB,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IACrB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,QAAQ,EAAE,cAAc,EAAE,CAAC;CAC5B;AAED;;GAEG;AACH,MAAM,MAAM,mBAAmB,GAAG,YAAY,GAAG,mBAAmB,CAAC;AAErE,MAAM,WAAW,SAAS;IACxB,IAAI,EAAE,mBAAmB,CAAC;IAC1B,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,aAAa,CAAC,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,UAAU;IACzB,MAAM,EAAE,MAAM,CAAC;IACf,cAAc,EAAE,MAAM,CAAC;IACvB,cAAc,CAAC,EAAE,MAAM,CAAC;IACxB,cAAc,CAAC,EAAE,MAAM,CAAC;IACxB,QAAQ,EAAE,MAAM,CAAC;IACjB,QAAQ,EAAE,MAAM,CAAC;IACjB,aAAa,EAAE,MAAM,CAAC;IACtB,mBAAmB,EAAE,MAAM,CAAC;CAC7B;AAED;;GAEG;AACH,MAAM,MAAM,aAAa,GAAG,KAAK,GAAG,IAAI,GAAG,IAAI,GAAG,OAAO,CAAC;AAE1D,MAAM,WAAW,aAAa;IAC5B,SAAS,EAAE,aAAa,CAAC;IACzB,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,cAAc;IAC7B,GAAG,EAAE,MAAM,CAAC;IACZ,EAAE,EAAE,MAAM,CAAC;IACX,EAAE,EAAE,MAAM,CAAC;IACX,KAAK,EAAE,MAAM,CAAC;IACd,eAAe,EAAE,OAAO,CAAC;CAG1B;AAED;;GAEG;AACH,MAAM,MAAM,gBAAgB,GAAG,OAAO,GAAG,WAAW,GAAG,UAAU,GAAG,QAAQ,GAAG,UAAU,CAAC;AAE1F,MAAM,WAAW,aAAa;IAC5B,QAAQ,EAAE,gBAAgB,CAAC;IAC3B,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,cAAc;IAC7B,KAAK,EAAE,MAAM,CAAC;IACd,QAAQ,EAAE,MAAM,CAAC;IACjB,OAAO,EAAE,MAAM,CAAC;IAChB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,UAAU,EAAE,MAAM,CAAC;IACnB,QAAQ,EAAE,MAAM,CAAC;IACjB,mBAAmB,EAAE,MAAM,CAAC;IAC5B,YAAY,EAAE,MAAM,CAAC;CACtB;AAED,MAAM,WAAW,YAAY;IAC3B,OAAO,EAAE,MAAM,CAAC;IAChB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,UAAU,EAAE,MAAM,CAAC;IACnB,QAAQ,EAAE,MAAM,CAAC;IACjB,mBAAmB,EAAE,MAAM,CAAC;IAC5B,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,WAAW,aAAa;IAC5B,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IACrB,gBAAgB,EAAE,MAAM,CAAC;IACzB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IAIrB,mBAAmB,EAAE,MAAM,CAAC;CAC7B;AAED,MAAM,WAAW,cAAc;IAC7B,YAAY,EAAE,MAAM,CAAC;IACrB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,aAAa,EAAE,MAAM,CAAC;IACtB,eAAe,EAAE,MAAM,CAAC;IACxB,aAAa,EAAE,MAAM,CAAC;IACtB,iBAAiB,EAAE,MAAM,CAAC;IAC1B,aAAa,EAAE,MAAM,CAAC;IACtB,iBAAiB,EAAE,MAAM,CAAC;CAC3B;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,IAAI,GAAG,IAAI,GAAG,GAAG,CAAC;AAE/C,MAAM,WAAW,cAAc;IAC7B,SAAS,EAAE,cAAc,CAAC;IAC1B,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,eAAe;IAC9B,EAAE,EAAE,MAAM,CAAC;IACX,EAAE,EAAE,MAAM,CAAC;IACX,MAAM,EAAE,MAAM,CAAC;IACf,GAAG,EAAE,MAAM,CAAC;IACZ,eAAe,EAAE,OAAO,CAAC;CAK1B;AAED;;GAEG;AACH,MAAM,MAAM,SAAS,GAAG,QAAQ,GAAG,MAAM,CAAC;AAE1C,MAAM,WAAW,UAAU;IACzB,WAAW,EAAE,MAAM,CAAC;IACpB,SAAS,EAAE,SAAS,CAAC;CACtB;AAED,MAAM,WAAW,WAAW;IAC1B,WAAW,EAAE,MAAM,CAAC;IACpB,eAAe,EAAE,MAAM,CAAC;IACxB,KAAK,EAAE,MAAM,CAAC;IACd,aAAa,EAAE,MAAM,CAAC;IACtB,QAAQ,EAAE,MAAM,CAAC;IACjB,cAAc,EAAE,MAAM,CAAC;IACvB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED,MAAM,WAAW,SAAS;IACxB,OAAO,EAAE,MAAM,CAAC;IAChB,WAAW,EAAE,MAAM,CAAC;IACpB,SAAS,EAAE,MAAM,CAAC;IAClB,cAAc,EAAE,MAAM,CAAC;IACvB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,WAAW,GAAG,cAAc,GAAG,gBAAgB,GAAG,iBAAiB,CAAC;AAEjG,MAAM,WAAW,WAAW;IAC1B,YAAY,EAAE,MAAM,CAAC;IACrB,gBAAgB,EAAE,MAAM,CAAC;IACzB,WAAW,EAAE,MAAM,CAAC;IACpB,KAAK,CAAC,EAAE,MAAM,CAAC;IACf,QAAQ,CAAC,EAAE,cAAc,CAAC;CAC3B;AAED,MAAM,WAAW,YAAY;IAC3B,UAAU,EAAE,MAAM,CAAC;IACnB,WAAW,EAAE,MAAM,CAAC;IACpB,sBAAsB,EAAE,MAAM,CAAC;IAC/B,WAAW,CAAC,EAAE,MAAM,CAAC;IACrB,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,QAAQ,GAAG,KAAK,GAAG,KAAK,CAAC;AAEtD,MAAM,WAAW,QAAQ;IACvB,QAAQ,EAAE,cAAc,CAAC;IACzB,aAAa,EAAE,MAAM,CAAC;IACtB,KAAK,EAAE,MAAM,CAAC;IACd,gBAAgB,CAAC,EAAE,MAAM,CAAC;CAC3B;AAED,MAAM,WAAW,SAAS;IACxB,YAAY,EAAE,MAAM,CAAC;IACrB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,gBAAgB,EAAE,MAAM,CAAC;IACzB,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,MAAM,UAAU,GAAG,QAAQ,GAAG,SAAS,CAAC;AAE9C,MAAM,WAAW,WAAW;IAC1B,IAAI,EAAE,UAAU,CAAC;IACjB,IAAI,EAAE,MAAM,CAAC;CACd;AAED,MAAM,WAAW,YAAY;IAC3B,IAAI,EAAE,MAAM,CAAC;IACb,aAAa,EAAE,MAAM,CAAC;IACtB,KAAK,EAAE,MAAM,CAAC;IACd,QAAQ,EAAE,MAAM,CAAC;IACjB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED,MAAM,WAAW,UAAU;IACzB,aAAa,EAAE,MAAM,CAAC;IACtB,KAAK,EAAE,MAAM,CAAC;IACd,QAAQ,EAAE,MAAM,CAAC;IACjB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED;;GAEG;AACH,MAAM,MAAM,OAAO,GAAG,MAAM,GAAG,OAAO,CAAC;AAEvC,MAAM,WAAW,cAAc;IAC7B,WAAW,EAAE,MAAM,CAAC;IACpB,OAAO,EAAE,OAAO,CAAC;IACjB,eAAe,EAAE,MAAM,CAAC;IACxB,OAAO,EAAE,MAAM,CAAC;CACjB;AAED,MAAM,WAAW,eAAe;IAC9B,WAAW,EAAE,MAAM,CAAC;IACpB,cAAc,EAAE,MAAM,CAAC;IACvB,cAAc,EAAE,MAAM,CAAC;IACvB,OAAO,EAAE,MAAM,CAAC;IAChB,OAAO,EAAE,MAAM,CAAC;IAChB,aAAa,EAAE,MAAM,CAAC;CACvB;AAED;;GAEG;AACH,MAAM,MAAM,eAAe,GAAG,YAAY,GAAG,iBAAiB,GAAG,WAAW,GAAG,YAAY,CAAC;AAC5F,MAAM,MAAM,YAAY,GAAG,aAAa,GAAG,UAAU,GAAG,QAAQ,CAAC;AACjE,MAAM,MAAM,iBAAiB,GAAG,OAAO,GAAG,WAAW,GAAG,UAAU,GAAG,QAAQ,GAAG,UAAU,GAAG,QAAQ,CAAC;AAEtG,MAAM,WAAW,cAAc;IAC7B,MAAM,EAAE,eAAe,CAAC;IACxB,QAAQ,EAAE,iBAAiB,CAAC;IAC5B,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,YAAY,CAAC,EAAE,YAAY,CAAC;IAC5B,KAAK,CAAC,EAAE,MAAM,CAAC;IACf,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,QAAQ,CAAC,EAAE,MAAM,CAAC;IAClB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,QAAQ,CAAC,EAAE,MAAM,CAAC;IAClB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,cAAc,CAAC,EAAE,MAAM,CAAC;IACxB,IAAI,CAAC,EAAE,MAAM,CAAC;IACd,aAAa,CAAC,EAAE,MAAM,CAAC;IACvB,OAAO,CAAC,EAAE,MAAM,CAAC;IACjB,YAAY,CAAC,EAAE,MAAM,CAAC;CACvB;AAED,MAAM,WAAW,aAAa;IAC5B,IAAI,EAAE,MAAM,CAAC;IACb,SAAS,EAAE,MAAM,CAAC;IAClB,gBAAgB,EAAE,MAAM,CAAC;IACzB,MAAM,EAAE,MAAM,CAAC;CAChB;AAED,MAAM,WAAW,eAAe;IAC9B,WAAW,EAAE,aAAa,EAAE,CAAC;IAC7B,eAAe,EAAE,MAAM,CAAC;IACxB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,aAAa,EAAE;QACb,CAAC,EAAE,MAAM,CAAC;QACV,GAAG,EAAE,MAAM,CAAC;QACZ,CAAC,CAAC,EAAE,MAAM,CAAC;KACZ,CAAC;CACH;AAED;;GAEG;AACH,MAAM,MAAM,WAAW,GAAG,MAAM,GAAG,MAAM,GAAG,MAAM,GAAG,KAAK,CAAC;AAC3D,MAAM,MAAM,aAAa,GAAG,WAAW,GAAG,eAAe,GAAG,gBAAgB,GAAG,UAAU,CAAC;AAC1F,MAAM,MAAM,YAAY,GAAG,KAAK,GAAG,UAAU,GAAG,MAAM,GAAG,UAAU,CAAC;AAEpE;;;GAGG;AACH,MAAM,MAAM,qBAAqB,GAAG,UAAU,GAAG,aAAa,GAAG,qBAAqB,CAAC;AAEvF;;;;GAIG;AACH,MAAM,MAAM,sBAAsB,GAC9B,SAAS,GACT,aAAa,GACb,aAAa,GACb,mBAAmB,GACnB,eAAe,GACf,wBAAwB,GACxB,oBAAoB,GACpB,MAAM,GACN,iBAAiB,GACjB,mBAAmB,GACnB,oBAAoB,GACpB,iBAAiB,GACjB,kBAAkB,GAClB,cAAc,GACd,gBAAgB,CAAC;AAErB;;;GAGG;AACH,MAAM,WAAW,kBAAkB;IACjC,IAAI,EAAE,sBAAsB,CAAC;IAC7B,MAAM,EAAE,MAAM,CAAC,MAAM,EAAE,MAAM,GAAG,MAAM,CAAC,CAAC;CACzC;AAED,MAAM,WAAW,aAAa;IAC5B,OAAO,EAAE,WAAW,CAAC;IACrB,OAAO,EAAE,MAAM,CAAC;IAChB,OAAO,EAAE,MAAM,CAAC;IAChB,WAAW,EAAE,MAAM,CAAC;IACpB,SAAS,EAAE,aAAa,CAAC;IACzB,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,QAAQ,CAAC,EAAE,MAAM,CAAC;IAClB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,QAAQ,CAAC,EAAE,MAAM,CAAC;IAClB,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,MAAM,CAAC,EAAE,MAAM,CAAC;IAChB,OAAO,CAAC,EAAE,MAAM,CAAC;IACjB,SAAS,EAAE,MAAM,CAAC;CACnB;AAED,MAAM,WAAW,cAAc;IAC7B,SAAS,EAAE,MAAM,CAAC;IAClB,UAAU,EAAE,MAAM,CAAC;IACnB,gBAAgB,EAAE,MAAM,CAAC;IACzB,mBAAmB,EAAE,MAAM,CAAC;IAC5B,eAAe,EAAE,MAAM,CAAC;IACxB,kBAAkB,EAAE,OAAO,CAAC;IAE5B,WAAW,EAAE,MAAM,CAAC;IACpB,WAAW,EAAE;QACX,GAAG,EAAE,MAAM,CAAC;QACZ,GAAG,EAAE,MAAM,CAAC;QACZ,MAAM,EAAE,MAAM,CAAC;QACf,UAAU,EAAE,qBAAqB,CAAC;KACnC,CAAC;IACF,aAAa,EAAE;QACb,GAAG,EAAE,MAAM,CAAC;QACZ,GAAG,EAAE,MAAM,CAAC;KACb,CAAC;IACF,cAAc,EAAE,MAAM,CAAC;IACvB,kBAAkB,EAAE,OAAO,CAAC;IAG5B,YAAY,EAAE,YAAY,CAAC;IAC3B,aAAa,EAAE,KAAK,GAAG,QAAQ,GAAG,MAAM,CAAC;IACzC,qCAAqC;IACrC,eAAe,EAAE,MAAM,EAAE,CAAC;IAC1B,+EAA+E;IAC/E,mBAAmB,EAAE,kBAAkB,EAAE,CAAC;CAC3C;AAED;;GAEG;AACH,MAAM,MAAM,gBAAgB,GAAG,WAAW,GAAG,eAAe,GAAG,gBAAgB,GAAG,UAAU,GAAG,UAAU,CAAC;AAC1G,MAAM,MAAM,SAAS,GAAG,MAAM,GAAG,QAAQ,GAAG,KAAK,GAAG,KAAK,CAAC;AAC1D,MAAM,MAAM,YAAY,GAAG,MAAM,GAAG,YAAY,GAAG,UAAU,GAAG,UAAU,CAAC;AAE3E,MAAM,WAAW,YAAY;IAC3B,SAAS,EAAE,gBAAgB,CAAC;IAC5B,SAAS,EAAE,SAAS,CAAC;IACrB,QAAQ,EAAE,YAAY,CAAC;IACvB,SAAS,EAAE,MAAM,CAAC;CACnB;AAED,MAAM,WAAW,UAAU;IACzB,WAAW,EAAE,MAAM,CAAC;IACpB,QAAQ,EAAE,MAAM,CAAC;IACjB,eAAe,EAAE,MAAM,CAAC;CACzB;AAED,MAAM,WAAW,aAAa;IAC5B,eAAe,EAAE,UAAU,EAAE,CAAC;IAC9B,WAAW,EAAE,MAAM,CAAC;IACpB,YAAY,EAAE;QAAE,GAAG,EAAE,MAAM,CAAC;QAAC,GAAG,EAAE,MAAM,CAAA;KAAE,CAAC;IAC3C,KAAK,EAAE,MAAM,EAAE,CAAC;CACjB;AAED;;;;;;GAMG;AACH,MAAM,MAAM,kBAAkB,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,MAAM,GAAG,MAAM,CAAC;AAEjF,MAAM,WAAW,iBAAiB;IAChC,OAAO,EAAE,MAAM,CAAC;IAChB,UAAU,EAAE,MAAM,CAAC;IACnB,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,SAAS,EAAE,kBAAkB,CAAC;IAC9B,WAAW,EAAE,MAAM,CAAC;CACrB;AAED,MAAM,WAAW,kBAAkB;IACjC,MAAM,EAAE,MAAM,CAAC;IACf,aAAa,EAAE,MAAM,CAAC;IACtB,oBAAoB,EAAE,MAAM,CAAC;IAC7B,aAAa,EAAE,MAAM,CAAC;IACtB,YAAY,EAAE,MAAM,CAAC;IACrB,WAAW,EAAE,MAAM,CAAC;IACpB,cAAc,EAAE,MAAM,CAAC;IACvB,MAAM,EAAE,OAAO,CAAC;CACjB;AAED;;GAEG;AACH,MAAM,MAAM,gBAAgB,GAAG,MAAM,GAAG,IAAI,GAAG,KAAK,GAAG,IAAI,GAAG,IAAI,CAAC;AAEnE,MAAM,WAAW,2BAA2B;IAC1C,QAAQ,EAAE,gBAAgB,CAAC;IAC3B,KAAK,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,4BAA4B;IAC3C,IAAI,EAAE,MAAM,GAAG,IAAI,CAAC;IACpB,EAAE,EAAE,MAAM,GAAG,IAAI,CAAC;IAClB,GAAG,EAAE,MAAM,GAAG,IAAI,CAAC;IACnB,EAAE,EAAE,MAAM,GAAG,IAAI,CAAC;IAClB,EAAE,EAAE,MAAM,GAAG,IAAI,CAAC;IAClB,QAAQ,EAAE,MAAM,CAAC;IACjB,KAAK,EAAE,MAAM,CAAC;CACf;AAED;;GAEG;AACH,MAAM,MAAM,YAAY,GAAG,MAAM,GAAG,IAAI,CAAC;AACzC,MAAM,MAAM,YAAY,GAAG,MAAM,GAAG,OAAO,GAAG,OAAO,GAAG,OAAO,GAAG,QAAQ,GAAG,KAAK,CAAC;AAEnF,MAAM,WAAW,aAAa;IAC5B,QAAQ,EAAE,YAAY,CAAC;IACvB,WAAW,EAAE,MAAM,CAAC;IACpB,QAAQ,EAAE,YAAY,CAAC;CACxB;AAED,MAAM,WAAW,cAAc;IAC7B,WAAW,EAAE,MAAM,CAAC;IACpB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,cAAc,EAAE,MAAM,CAAC;IACvB,gBAAgB,EAAE,MAAM,CAAC;IACzB,YAAY,EAAE,MAAM,CAAC;CACtB;AAED;;GAEG;AACH,MAAM,MAAM,cAAc,GAAG,YAAY,GAAG,WAAW,CAAC;AACxD,MAAM,MAAM,aAAa,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,GAAG,MAAM,GAAG,MAAM,CAAC;AAE5E,MAAM,WAAW,eAAe;IAC9B,QAAQ,EAAE,cAAc,CAAC;IACzB,aAAa,EAAE,aAAa,CAAC;IAC7B,WAAW,EAAE,MAAM,CAAC;CACrB;AAED,MAAM,WAAW,gBAAgB;IAC/B,WAAW,EAAE,MAAM,CAAC;IACpB,aAAa,EAAE,MAAM,CAAC;IACtB,aAAa,EAAE,MAAM,CAAC;IACtB,SAAS,EAAE,MAAM,CAAC;IAClB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,SAAS,EAAE,MAAM,CAAC;IAClB,QAAQ,EAAE,MAAM,CAAC;IACjB,kBAAkB,EAAE,MAAM,CAAC;IAC3B,MAAM,EAAE,MAAM,CAAC;CAChB"}

package/dist/metal/weldStrength.d.ts

@@ -0,0 +1,36 @@
+import type { WeldStrengthInput, WeldStrengthResult } from './types.js';
+/**
+ * Calculate the load-carrying capacity of an equal-leg fillet weld (AISC ASD).
+ *
+ * # Formulas
+ * - Effective throat:      t = 0.707 x leg
+ * - Effective area:        Aw = t x L x n
+ * - Allowable shear stress: Fw = 0.30 x FEXX
+ * - Allowable load (capacity): Pallow = Fw x Aw
+ * - Actual shear stress:    tau = P / Aw
+ * - Utilization:            u = tau / Fw = P / Pallow
+ * - Minimum required leg:   leg_min = P / (Fw x 0.707 x L x n)
+ *
+ * Units are SI throughout: leg/length in mm give Aw in mm^2; Fw in MPa (= N/mm^2)
+ * gives Pallow directly in N. Cross-check: E70 -> Fw = 0.30 x 70 = 21 ksi, the
+ * classic AISC worked-example value (= 0.30 x 483 MPa = 144.9 MPa).
+ *
+ * # v1 scope (deliberately conservative — matches the common baseline calculators)
+ * These are recorded here so the boundary is explicit, not accidental:
+ * 1. **ASD only.** Allowable-stress design (0.30 x FEXX). LRFD (phi = 0.75,
+ *    Fnw = 0.60 x FEXX) is deferred until demanded via a `method` parameter.
+ * 2. **Longitudinal / conservative.** No directional strength increase. AISC allows
+ *    up to 1.5x for transverse loading (Fw = 0.60 x FEXX x (1 + 0.5 sin^1.5 theta));
+ *    omitting it is conservative and matches most basic calculators.
+ * 3. **Weld metal only.** Base-metal (shear rupture) checks are the engineer's
+ *    responsibility; a full design also verifies the connected material.
+ * 4. **Equal-leg, 90-degree joint.** t = 0.707 x leg assumes an equal-leg fillet on a
+ *    square (90-degree) joint. Unequal-leg / non-90-degree joints are deferred.
+ *
+ * Reference: AISC 360 (Steel Construction Manual), AWS D1.1 Structural Welding Code.
+ *
+ * @throws {RangeError} legSize or weldLength is not positive, weldCount < 1, or
+ *   appliedLoad is negative
+ */
+export declare function weldStrength(input: WeldStrengthInput): WeldStrengthResult;
+//# sourceMappingURL=weldStrength.d.ts.map

package/dist/metal/weldStrength.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"weldStrength.d.ts","sourceRoot":"","sources":["../../src/metal/weldStrength.ts"],"names":[],"mappings":"AACA,OAAO,KAAK,EAEV,iBAAiB,EACjB,kBAAkB,EACnB,MAAM,YAAY,CAAC;AAyBpB;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAgCG;AACH,wBAAgB,YAAY,CAAC,KAAK,EAAE,iBAAiB,GAAG,kBAAkB,CA6CzE"}

package/dist/metal/weldStrength.js

@@ -0,0 +1,94 @@
+import { roundTo } from '../utils.js';
+/**
+ * Minimum tensile strength of deposited weld metal (FEXX), in MPa.
+ *
+ * The electrode class number is FEXX in ksi (E70 = 70 ksi). Values below are the
+ * exact SI conversion of the nominal ksi rating (1 ksi = 6.894757 MPa), rounded to
+ * the nearest MPa — NOT eyeballed. E100 = 100 x 6.894757 = 689.48 -> 689 (not 690);
+ * E110 = 758.42 -> 758 (not 760).
+ */
+const FEXX_MPA = {
+    E60: 414, // 60 ksi  = 413.69 MPa
+    E70: 483, // 70 ksi  = 482.63 MPa
+    E80: 552, // 80 ksi  = 551.58 MPa
+    E90: 621, // 90 ksi  = 620.53 MPa
+    E100: 689, // 100 ksi = 689.48 MPa
+    E110: 758, // 110 ksi = 758.42 MPa
+};
+/** Effective-throat factor for an equal-leg, 90-degree fillet weld: t = 0.707 x leg. */
+const THROAT_FACTOR = 0.707;
+/** AISC ASD allowable shear stress on the weld throat: Fw = 0.30 x FEXX. */
+const ASD_SHEAR_FACTOR = 0.30;
+/**
+ * Calculate the load-carrying capacity of an equal-leg fillet weld (AISC ASD).
+ *
+ * # Formulas
+ * - Effective throat:      t = 0.707 x leg
+ * - Effective area:        Aw = t x L x n
+ * - Allowable shear stress: Fw = 0.30 x FEXX
+ * - Allowable load (capacity): Pallow = Fw x Aw
+ * - Actual shear stress:    tau = P / Aw
+ * - Utilization:            u = tau / Fw = P / Pallow
+ * - Minimum required leg:   leg_min = P / (Fw x 0.707 x L x n)
+ *
+ * Units are SI throughout: leg/length in mm give Aw in mm^2; Fw in MPa (= N/mm^2)
+ * gives Pallow directly in N. Cross-check: E70 -> Fw = 0.30 x 70 = 21 ksi, the
+ * classic AISC worked-example value (= 0.30 x 483 MPa = 144.9 MPa).
+ *
+ * # v1 scope (deliberately conservative — matches the common baseline calculators)
+ * These are recorded here so the boundary is explicit, not accidental:
+ * 1. **ASD only.** Allowable-stress design (0.30 x FEXX). LRFD (phi = 0.75,
+ *    Fnw = 0.60 x FEXX) is deferred until demanded via a `method` parameter.
+ * 2. **Longitudinal / conservative.** No directional strength increase. AISC allows
+ *    up to 1.5x for transverse loading (Fw = 0.60 x FEXX x (1 + 0.5 sin^1.5 theta));
+ *    omitting it is conservative and matches most basic calculators.
+ * 3. **Weld metal only.** Base-metal (shear rupture) checks are the engineer's
+ *    responsibility; a full design also verifies the connected material.
+ * 4. **Equal-leg, 90-degree joint.** t = 0.707 x leg assumes an equal-leg fillet on a
+ *    square (90-degree) joint. Unequal-leg / non-90-degree joints are deferred.
+ *
+ * Reference: AISC 360 (Steel Construction Manual), AWS D1.1 Structural Welding Code.
+ *
+ * @throws {RangeError} legSize or weldLength is not positive, weldCount < 1, or
+ *   appliedLoad is negative
+ */
+export function weldStrength(input) {
+    const { legSize, weldLength, electrode, appliedLoad } = input;
+    const weldCount = input.weldCount ?? 1;
+    // Validation
+    if (legSize <= 0) {
+        throw new RangeError('legSize must be greater than 0');
+    }
+    if (weldLength <= 0) {
+        throw new RangeError('weldLength must be greater than 0');
+    }
+    if (weldCount < 1) {
+        throw new RangeError('weldCount must be at least 1');
+    }
+    if (appliedLoad < 0) {
+        throw new RangeError('appliedLoad must not be negative');
+    }
+    const fexx = FEXX_MPA[electrode];
+    // Geometry and capacity
+    const throat = THROAT_FACTOR * legSize; // mm
+    const effectiveArea = throat * weldLength * weldCount; // mm^2
+    const allowableShearStress = ASD_SHEAR_FACTOR * fexx; // MPa
+    const allowableLoad = allowableShearStress * effectiveArea; // N (MPa x mm^2)
+    // Demand
+    const actualStress = appliedLoad / effectiveArea; // MPa
+    const utilization = appliedLoad / allowableLoad; // ratio
+    // Smallest equal leg that carries appliedLoad (inverts throat + capacity):
+    // leg_min = P / (Fw x 0.707 x L x n). Denominator is always > 0.
+    const minRequiredLeg = appliedLoad / (allowableShearStress * THROAT_FACTOR * weldLength * weldCount);
+    return {
+        throat: roundTo(throat, 3),
+        effectiveArea: roundTo(effectiveArea, 2),
+        allowableShearStress: roundTo(allowableShearStress, 2),
+        allowableLoad: roundTo(allowableLoad, 1),
+        actualStress: roundTo(actualStress, 2),
+        utilization: roundTo(utilization, 4),
+        minRequiredLeg: roundTo(minRequiredLeg, 3),
+        isSafe: utilization <= 1,
+    };
+}
+//# sourceMappingURL=weldStrength.js.map

package/dist/metal/weldStrength.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"weldStrength.js","sourceRoot":"","sources":["../../src/metal/weldStrength.ts"],"names":[],"mappings":"AAAA,OAAO,EAAE,OAAO,EAAE,MAAM,aAAa,CAAC;AAOtC;;;;;;;GAOG;AACH,MAAM,QAAQ,GAAuC;IACnD,GAAG,EAAE,GAAG,EAAI,uBAAuB;IACnC,GAAG,EAAE,GAAG,EAAI,uBAAuB;IACnC,GAAG,EAAE,GAAG,EAAI,uBAAuB;IACnC,GAAG,EAAE,GAAG,EAAI,uBAAuB;IACnC,IAAI,EAAE,GAAG,EAAG,uBAAuB;IACnC,IAAI,EAAE,GAAG,EAAG,uBAAuB;CACpC,CAAC;AAEF,wFAAwF;AACxF,MAAM,aAAa,GAAG,KAAK,CAAC;AAE5B,4EAA4E;AAC5E,MAAM,gBAAgB,GAAG,IAAI,CAAC;AAE9B;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAgCG;AACH,MAAM,UAAU,YAAY,CAAC,KAAwB;IACnD,MAAM,EAAE,OAAO,EAAE,UAAU,EAAE,SAAS,EAAE,WAAW,EAAE,GAAG,KAAK,CAAC;IAC9D,MAAM,SAAS,GAAG,KAAK,CAAC,SAAS,IAAI,CAAC,CAAC;IAEvC,aAAa;IACb,IAAI,OAAO,IAAI,CAAC,EAAE,CAAC;QACjB,MAAM,IAAI,UAAU,CAAC,gCAAgC,CAAC,CAAC;IACzD,CAAC;IACD,IAAI,UAAU,IAAI,CAAC,EAAE,CAAC;QACpB,MAAM,IAAI,UAAU,CAAC,mCAAmC,CAAC,CAAC;IAC5D,CAAC;IACD,IAAI,SAAS,GAAG,CAAC,EAAE,CAAC;QAClB,MAAM,IAAI,UAAU,CAAC,8BAA8B,CAAC,CAAC;IACvD,CAAC;IACD,IAAI,WAAW,GAAG,CAAC,EAAE,CAAC;QACpB,MAAM,IAAI,UAAU,CAAC,kCAAkC,CAAC,CAAC;IAC3D,CAAC;IAED,MAAM,IAAI,GAAG,QAAQ,CAAC,SAAS,CAAC,CAAC;IAEjC,wBAAwB;IACxB,MAAM,MAAM,GAAG,aAAa,GAAG,OAAO,CAAC,CAAiB,KAAK;IAC7D,MAAM,aAAa,GAAG,MAAM,GAAG,UAAU,GAAG,SAAS,CAAC,CAAE,OAAO;IAC/D,MAAM,oBAAoB,GAAG,gBAAgB,GAAG,IAAI,CAAC,CAAG,MAAM;IAC9D,MAAM,aAAa,GAAG,oBAAoB,GAAG,aAAa,CAAC,CAAC,iBAAiB;IAE7E,SAAS;IACT,MAAM,YAAY,GAAG,WAAW,GAAG,aAAa,CAAC,CAAO,MAAM;IAC9D,MAAM,WAAW,GAAG,WAAW,GAAG,aAAa,CAAC,CAAQ,QAAQ;IAEhE,2EAA2E;IAC3E,iEAAiE;IACjE,MAAM,cAAc,GAClB,WAAW,GAAG,CAAC,oBAAoB,GAAG,aAAa,GAAG,UAAU,GAAG,SAAS,CAAC,CAAC;IAEhF,OAAO;QACL,MAAM,EAAE,OAAO,CAAC,MAAM,EAAE,CAAC,CAAC;QAC1B,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,oBAAoB,EAAE,OAAO,CAAC,oBAAoB,EAAE,CAAC,CAAC;QACtD,aAAa,EAAE,OAAO,CAAC,aAAa,EAAE,CAAC,CAAC;QACxC,YAAY,EAAE,OAAO,CAAC,YAAY,EAAE,CAAC,CAAC;QACtC,WAAW,EAAE,OAAO,CAAC,WAAW,EAAE,CAAC,CAAC;QACpC,cAAc,EAAE,OAAO,CAAC,cAAc,EAAE,CAAC,CAAC;QAC1C,MAAM,EAAE,WAAW,IAAI,CAAC;KACzB,CAAC;AACJ,CAAC"}

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "formulab",
-  "version": "0.20.0",
-  "description": "Manufacturing & Engineering calculation formulas library - 210 industrial calculations across 15 domains for OEE, Cpk, SPC, FMEA, Nelson Rules, metal weight, CNC machining, GD&T, battery, environmental, pipe flow, logistics, IE time study, and more",
+  "version": "0.21.0",
+  "description": "Manufacturing & Engineering calculation formulas library - 211 industrial calculations across 15 domains for OEE, Cpk, SPC, FMEA, Nelson Rules, metal weight, CNC machining, GD&T, battery, environmental, pipe flow, logistics, IE time study, and more",
   "type": "module",
   "main": "./dist/index.js",
   "types": "./dist/index.d.ts",