forgegit 1.4.1 → 1.5.0

package/lib/templates.cmd

@@ -1,98 +0,0 @@
-@echo off
-REM ============================================================
-REM   forge-git / lib/templates.cmd
-REM   Copies templates from templates/ to destinations
-REM ============================================================
-
-if "%~1"=="write_gitignore"  goto :write_gitignore
-if "%~1"=="write_readme"     goto :write_readme
-if "%~1"=="write_forge"      goto :write_forge
-if "%~1"=="write_save"       goto :write_save
-if "%~1"=="write_push"       goto :write_push
-if "%~1"=="write_snapshots"  goto :write_snapshots
-if "%~1"=="write_historial"  goto :write_historial
-if "%~1"=="write_abrir"      goto :write_abrir
-if "%~1"=="write_auditar"    goto :write_auditar
-if "%~1"=="write_serve"      goto :write_serve
-goto :eof
-
-:write_gitignore
-call :copy_root "gitignore.tpl" ".gitignore"
-goto :eof
-
-:write_readme
-call :apply_root "readme.md.tpl" "README.md"
-goto :eof
-
-:write_forge
-call :copy_root "forge.cmd.tpl" "forge.cmd"
-goto :eof
-
-:write_save
-call :copy_cmd "save.cmd.tpl" "save.cmd"
-goto :eof
-
-:write_push
-call :copy_cmd "push.cmd.tpl" "push.cmd"
-goto :eof
-
-:write_snapshots
-call :copy_cmd "snapshots.cmd.tpl" "snapshots.cmd"
-goto :eof
-
-:write_historial
-call :copy_cmd "historial.cmd.tpl" "historial.cmd"
-goto :eof
-
-:write_abrir
-call :copy_cmd "abrir.cmd.tpl" "abrir.cmd"
-goto :eof
-
-:write_auditar
-call :copy_cmd "auditar.cmd.tpl" "auditar.cmd"
-goto :eof
-
-:write_serve
-call :copy_cmd "serve.cmd.tpl" "serve.cmd"
-call :copy_forge_root "serve-static.js" "serve-static.js"
-goto :eof
-
-:copy_root
-set "SRC=%~dp0..\templates\%~1"
-set "DST=%~dp0..\..\%~2"
-if not exist "%SRC%" (
-    echo   [X] Template no encontrado: %SRC%
-    exit /b 1
-)
-copy /Y "%SRC%" "%DST%" >nul
-exit /b 0
-
-:copy_cmd
-set "SRC=%~dp0..\templates\%~1"
-set "DST=%~dp0..\commands\%~2"
-if not exist "%SRC%" (
-    echo   [X] Template no encontrado: %SRC%
-    exit /b 1
-)
-copy /Y "%SRC%" "%DST%" >nul
-exit /b 0
-
-:copy_forge_root
-set "SRC=%~dp0..\templates\%~1"
-set "DST=%~dp0..\%~2"
-if not exist "%SRC%" (
-    echo   [X] Template no encontrado: %SRC%
-    exit /b 1
-)
-copy /Y "%SRC%" "%DST%" >nul
-exit /b 0
-
-:apply_root
-set "SRC=%~dp0..\templates\%~1"
-set "DST=%~dp0..\..\%~2"
-if not exist "%SRC%" (
-    echo   [X] Template no encontrado: %SRC%
-    exit /b 1
-)
-powershell -NoProfile -ExecutionPolicy Bypass -Command "$c = Get-Content -Raw -LiteralPath '%SRC%'; $c = $c.Replace('{{PROJECT_NAME}}', '%PROJECT_NAME%'); $c = $c.Replace('{{FG_VERSION}}', '%FG_VERSION%'); [System.IO.File]::WriteAllText('%DST%', $c, [System.Text.UTF8Encoding]::new($false))"
-exit /b 0

package/lib/ui.cmd

@@ -1,59 +0,0 @@
-@echo off
-REM ============================================================
-REM   forge-git / lib/ui.cmd
-REM   UI helpers
-REM ============================================================
-
-if "%~1"=="banner" goto :banner
-if "%~1"=="step"   goto :step
-if "%~1"=="done"   goto :done
-if "%~1"=="abort"  goto :abort
-goto :eof
-
-:banner
-echo.
-echo   ############################################
-echo   #  forge-git v%FG_VERSION%                        #
-echo   #  Bootstrap universal de proyecto         #
-echo   ############################################
-echo.
-echo   Proyecto: %PROJECT_NAME%
-echo   Ruta:     %CD%
-echo.
-goto :eof
-
-:step
-echo   [%~2] %~3    %~4
-goto :eof
-
-:done
-echo.
-echo   ############################################
-echo   #  Bootstrap completado                     #
-echo   ############################################
-echo.
-echo   Comandos disponibles:
-echo.
-echo     Esenciales:
-echo       init.cmd        Bootstrap
-echo       forge.cmd       Menu interactivo
-echo.
-echo     Uso CLI directo:
-echo       forge save      Commit de cambios
-echo       forge push      Push a GitHub
-echo       forge log       Ver commits
-echo.
-echo     Otros:
-echo       forge snap      Snapshots
-echo       forge audit     Reporte diff
-echo       forge open      Abrir en VS Code
-echo       forge serve     Servidor de desarrollo
-echo       forge help      Ayuda completa
-echo.
-goto :eof
-
-:abort
-echo.
-echo   Bootstrap abortado. Instala los requisitos y vuelve a intentar.
-pause
-goto :eof

package/templates/abrir.cmd.tpl

@@ -1,51 +0,0 @@
-@echo off
-setlocal EnableDelayedExpansion
-chcp 65001 >nul 2>nul
-
-cd /d "%~dp0..\.."
-
-REM --- Colores ANSI (con fallback) ---
-for /F %%a in ('echo prompt $E ^| cmd') do set "ESC=%%a"
-if "!ESC!"=="" (
-    set "C_CY=" & set "C_BC=" & set "C_GR=" & set "C_YE="
-    set "C_RE=" & set "C_GY=" & set "C_WH=" & set "C_RS="
-) else (
-    set "C_CY=!ESC![36m"  & set "C_BC=!ESC![96m"
-    set "C_GR=!ESC![32m"  & set "C_YE=!ESC![33m"
-    set "C_RE=!ESC![31m"  & set "C_GY=!ESC![90m"
-    set "C_WH=!ESC![97m"  & set "C_RS=!ESC![0m"
-)
-
-where code >nul 2>nul
-if errorlevel 1 (
-    echo.
-    echo   !C_RE![X]!C_RS! VS Code CLI no esta en el PATH.
-    echo.
-    echo   !C_GY!Instala:!C_RS!
-    echo      !C_WH!1.!C_RS! Abre VS Code
-    echo      !C_WH!2.!C_RS! Ctrl+Shift+P
-    echo      !C_WH!3.!C_RS! "Shell Command: Install 'code' command in PATH"
-    echo.
-    call :shell_if_double_click
-    exit /b 1
-)
-
-if "%~1"=="" (
-    echo   !C_GY!Abriendo proyecto en VS Code...!C_RS!
-    code .
-) else (
-    echo   !C_GY!Abriendo en VS Code:!C_RS! !C_WH!%*!C_RS!
-    code %*
-)
-
-exit /b 0
-
-:shell_if_double_click
-if "%NO_PAUSE%"=="1" goto :eof
-echo %cmdcmdline% | find /i "%~nx0" >nul
-if errorlevel 1 goto :eof
-echo.
-echo   !C_GY!Sesion interactiva. Escribe 'exit' para cerrar.!C_RS!
-echo.
-cmd /k
-goto :eof

package/templates/auditar.cmd.tpl

@@ -1,340 +0,0 @@
-@echo off
-setlocal EnableDelayedExpansion
-chcp 65001 >nul 2>nul
-
-cd /d "%~dp0..\.."
-
-REM --- Detectar soporte ANSI (Windows 10+ / Windows Terminal) ---
-set "ANSI=1"
-for /F %%a in ('echo prompt $E ^| cmd') do set "ESC=%%a"
-
-REM --- Fallback si no hay soporte ANSI ---
-if "!ESC!"=="" set "ANSI=0"
-
-if "!ANSI!"=="1" (
-    set "C_CYAN=!ESC![36m"
-    set "C_BCYAN=!ESC![96m"
-    set "C_GREEN=!ESC![32m"
-    set "C_YELLOW=!ESC![33m"
-    set "C_RED=!ESC![31m"
-    set "C_GRAY=!ESC![90m"
-    set "C_DIM=!ESC![2m"
-    set "C_WHITE=!ESC![97m"
-    set "C_RESET=!ESC![0m"
-) else (
-    set "C_CYAN="
-    set "C_BCYAN="
-    set "C_GREEN="
-    set "C_YELLOW="
-    set "C_RED="
-    set "C_GRAY="
-    set "C_DIM="
-    set "C_WHITE="
-    set "C_RESET="
-)
-
-REM --- Help flag ---
-if /i "%~1"=="--help" goto :help
-if /i "%~1"=="-h"     goto :help
-if /i "%~1"=="help"   goto :help
-
-if not exist ".git" (
-    echo   !C_RED![X]!C_RESET! No hay repositorio Git. Ejecuta: init.cmd
-    exit /b 1
-)
-
-REM --- Banner ---
-echo.
-echo   !C_CYAN!============================================!C_RESET!
-echo   !C_BCYAN! AUDITAR!C_RESET! !C_GRAY!- Reportes de cambios!C_RESET!
-echo   !C_CYAN!============================================!C_RESET!
-echo.
-echo   !C_GRAY!Genera un .txt con los cambios entre dos puntos del!C_RESET!
-echo   !C_GRAY!historial. Ideal para auditar con IA o revisar un rango.!C_RESET!
-echo.
-
-REM --- 1. Estado actual ---
-for /f "tokens=*" %%b in ('git branch --show-current 2^>nul') do set "BRANCH=%%b"
-
-echo   !C_CYAN!●!C_RESET! !C_GRAY!Branch:!C_RESET!   !C_WHITE!!BRANCH!!C_RESET!
-
-git add -A >nul 2>nul
-git diff --cached --quiet
-if errorlevel 1 (
-    set "NCH=0"
-    for /f %%c in ('git diff --cached --name-only ^| find /c /v ""') do set "NCH=%%c"
-    echo   !C_CYAN!●!C_RESET! !C_GRAY!Cambios:!C_RESET!  !C_YELLOW!!NCH! archivos sin commitear!C_RESET!
-) else (
-    echo   !C_CYAN!●!C_RESET! !C_GRAY!Cambios:!C_RESET!  !C_GREEN!limpio!C_RESET!
-)
-echo.
-
-REM --- 2. Cuantos commits listar ---
-set "LIMIT=10"
-set "INPUT="
-set /p "INPUT=  !C_BCYAN!Cuantos commits listar?!C_RESET! !C_GRAY![10 por defecto, T=todos]!C_RESET!: "
-if /i "!INPUT!"=="T" (
-    set "LIMIT=9999"
-) else if not "!INPUT!"=="" (
-    set "LIMIT=!INPUT!"
-)
-
-REM --- 3. Log a temp ---
-set "TMPLOG=%TEMP%\forge_git_log.txt"
-git log -n !LIMIT! --date=format:"%%Y-%%m-%%d %%H:%%M:%%S" --pretty=format:"%%h %%ad %%s" > "!TMPLOG!" 2>nul
-
-REM --- 4. Tabla con separadores ---
-echo.
-echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
-echo   !C_BCYAN! HISTORIAL!C_RESET!
-echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
-echo   !C_GRAY! IDX    FECHA                 HASH      MENSAJE!C_RESET!
-echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
-
-set "IDX=0"
-set "FIRST=1"
-for /f "delims=" %%L in ('type "!TMPLOG!"') do (
-    if "!FIRST!"=="0" (
-        echo   !C_DIM!!C_GRAY!  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .!C_RESET!
-    )
-    set "LINE=%%L"
-    set "HASH=!LINE:~0,7!"
-    set "DATETIME=!LINE:~8,19!"
-    set "MSG=!LINE:~28!"
-    set "H_!IDX!=!HASH!"
-    echo   !C_BCYAN![!IDX!]!C_RESET! !C_GRAY!!DATETIME!!C_RESET!  !C_YELLOW!!HASH!!C_RESET!  !C_WHITE!!MSG!!C_RESET!
-    set /a IDX=IDX+1
-    set "FIRST=0"
-)
-del "!TMPLOG!" >nul 2>nul
-
-if !IDX! EQU 0 (
-    echo   !C_RED![X]!C_RESET! No hay commits.
-    goto :end
-)
-
-echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
-echo   !C_GRAY!Total: !IDX! commits  ^(0 = mas reciente^)!C_RESET!
-echo.
-
-REM --- 5. Modos de uso (ordenados por frecuencia) ---
-echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
-echo   !C_BCYAN! MODOS DE USO!C_RESET!
-echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
-echo   !C_YELLOW!0,W!C_RESET!      !C_GRAY!Comparar ultimo commit vs estado actual!C_RESET!  !C_GREEN![recomendado]!C_RESET!
-echo   !C_YELLOW!0,3!C_RESET!      !C_GRAY!Comparar commit [0] vs commit [3]!C_RESET!
-echo   !C_YELLOW!0-3!C_RESET!      !C_GRAY!Alias de 0,3!C_RESET!
-echo   !C_YELLOW![Enter]!C_RESET!  !C_GRAY!Solo ver historial (sin reporte)!C_RESET!
-echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
-echo.
-
-REM --- 6. Pedir rango ---
-set "RANGE="
-set /p "RANGE=  !C_BCYAN!Rango a auditar:!C_RESET! !C_GRAY![Enter=0,W]!C_RESET!: "
-if "!RANGE!"=="" (
-    set "RANGE=0,W"
-    echo   !C_GRAY!Usando default: 0,W!C_RESET!
-)
-
-set "A="
-set "B="
-for /f "tokens=1,2 delims=,-" %%a in ("!RANGE!") do (
-    set "A=%%a"
-    if not "%%b"=="" set "B=%%b"
-)
-if "!A!"=="" (
-    echo   !C_RED![X]!C_RESET! Rango invalido.
-    goto :end
-)
-if "!B!"=="" set "B=!A!"
-
-if /i "!A!"=="W" (
-    echo   !C_RED![X]!C_RESET! El primer valor debe ser indice numerico. Formato: !C_YELLOW!5,W!C_RESET!
-    goto :end
-)
-if /i "!A!"=="WORK" (
-    echo   !C_RED![X]!C_RESET! El primer valor debe ser indice numerico. Formato: !C_YELLOW!5,W!C_RESET!
-    goto :end
-)
-if /i "!A!"=="HEAD" (
-    echo   !C_RED![X]!C_RESET! El primer valor debe ser indice numerico. Formato: !C_YELLOW!5,W!C_RESET!
-    goto :end
-)
-
-set "HA=!H_%A%!"
-if "!HA!"=="" (
-    echo   !C_RED![X]!C_RESET! Indice !A! no existe.
-    goto :end
-)
-
-set "H_NEW="
-set "H_OLD=!HA!"
-set "IS_WORK=0"
-
-if /i "!B!"=="W"    set "IS_WORK=1"
-if /i "!B!"=="WORK" set "IS_WORK=1"
-if /i "!B!"=="HEAD" set "IS_WORK=1"
-
-if "!IS_WORK!"=="1" (
-    set "H_OLD=!HA!"
-    set "H_NEW="
-    set "OLD_IDX=!A!"
-    set "NEW_IDX=WORK"
-    set "NEW_LABEL=working tree"
-) else (
-    set "HB=!H_%B%!"
-    if "!HB!"=="" (
-        echo   !C_RED![X]!C_RESET! Indice !B! no existe.
-        goto :end
-    )
-    set "OLD_IDX=!A!"
-    set "NEW_IDX=!B!"
-    if !A! LSS !B! (
-        set "OLD_IDX=!B!"
-        set "NEW_IDX=!A!"
-    )
-    set "H_OLD=!H_%OLD_IDX%!"
-    set "H_NEW=!H_%NEW_IDX%!"
-    set "NEW_LABEL=!H_NEW!"
-)
-
-echo.
-echo   !C_CYAN!●!C_RESET! !C_GRAY!Comparando:!C_RESET!
-echo       !C_GRAY![antiguo]!C_RESET!   !C_YELLOW!!H_OLD!!C_RESET!  !C_GRAY!^(idx !OLD_IDX!^)!C_RESET!
-if "!IS_WORK!"=="1" (
-    echo       !C_GRAY![reciente]!C_RESET!  !C_GREEN!working tree!C_RESET!
-) else (
-    echo       !C_GRAY![reciente]!C_RESET!  !C_YELLOW!!H_NEW!!C_RESET!  !C_GRAY!^(idx !NEW_IDX!^)!C_RESET!
-)
-echo.
-
-REM --- 7. Crear audits/ ---
-if not exist "audits" mkdir "audits"
-
-for /f %%i in ('powershell -NoProfile -Command "Get-Date -Format yyyy-MM-dd_HHmmss"') do set "TS=%%i"
-
-if "!IS_WORK!"=="1" (
-    set "REPORT=audits\audit_!TS!_!OLD_IDX!-WORK.txt"
-) else (
-    set "REPORT=audits\audit_!TS!_!OLD_IDX!-!NEW_IDX!.txt"
-)
-
-REM --- 8. Escribir reporte (SIN colores) ---
-(
-    echo # Reporte de auditoria
-    echo.
-    echo # Generado:  %DATE% %TIME%
-    echo # Proyecto:  %CD%
-    echo # Rango:     !H_OLD!  -^>  !NEW_LABEL!
-    echo.
-    if "!IS_WORK!"=="1" (
-        echo # Comparar:  git diff !H_OLD!
-    ) else (
-        echo # Comparar:  git diff !H_OLD! !H_NEW!
-    )
-    echo.
-    echo # ============================================================
-    echo # COMMITS EN EL RANGO
-    echo # ============================================================
-    echo.
-    if "!IS_WORK!"=="1" (
-        git log !H_OLD!..HEAD --date=format:"%%Y-%%m-%%d %%H:%%M:%%S" --pretty=format:"  %%ad  %%h  %%s"
-    ) else (
-        git log !H_OLD!^..!H_NEW! --date=format:"%%Y-%%m-%%d %%H:%%M:%%S" --pretty=format:"  %%ad  %%h  %%s"
-    )
-    echo.
-    echo.
-    echo # ============================================================
-    echo # DIFF COMPLETO
-    echo # ============================================================
-    echo.
-    if "!IS_WORK!"=="1" (
-        git diff !H_OLD!
-    ) else (
-        git diff !H_OLD! !H_NEW!
-    )
-    echo.
-    echo.
-    echo # ============================================================
-    echo # ESTADO ACTUAL (sin commitear)
-    echo # ============================================================
-    echo.
-    git status --short
-) > "!REPORT!" 2>&1
-
-REM --- 9. Resumen ---
-echo   !C_GREEN![OK]!C_RESET! Reporte generado
-echo.
-for %%f in ("!REPORT!") do set "SIZE=%%~zf"
-for /f %%l in ('find /c /v "" ^< "!REPORT!"') do set "LINES=%%l"
-
-echo       !C_GRAY!Archivo:!C_RESET!  !C_WHITE!!REPORT!!C_RESET!
-echo       !C_GRAY!Tamano:!C_RESET!   !C_WHITE!!SIZE! bytes!C_RESET!
-echo       !C_GRAY!Lineas:!C_RESET!   !C_WHITE!!LINES!!C_RESET!
-echo.
-
-REM --- 10. Abrir ---
-where code >nul 2>nul
-if not errorlevel 1 (
-    set "OPEN="
-    set /p "OPEN=  !C_BCYAN!Abrir en VS Code?!C_RESET! !C_GRAY![S/n]!C_RESET!: "
-    if /i not "!OPEN!"=="n" (
-        echo   !C_GRAY!Abriendo...!C_RESET!
-        code "!REPORT!"
-    )
-) else (
-    echo   !C_GRAY![INFO] VS Code CLI no disponible.!C_RESET!
-)
-
-echo.
-goto :end
-
-REM ============================================================
-REM   :help
-REM ============================================================
-:help
-echo.
-echo   !C_CYAN!============================================!C_RESET!
-echo   !C_BCYAN! AUDITAR!C_RESET! !C_GRAY!- Ayuda!C_RESET!
-echo   !C_CYAN!============================================!C_RESET!
-echo.
-echo   !C_BCYAN!USO:!C_RESET!
-echo     !C_WHITE!auditar.cmd!C_RESET!           Modo interactivo
-echo     !C_WHITE!auditar.cmd --help!C_RESET!    Esta ayuda
-echo.
-echo   !C_BCYAN!QUE HACE:!C_RESET!
-echo     !C_GRAY!Genera un reporte .txt en audits/ con los cambios!C_RESET!
-echo     !C_GRAY!entre dos puntos del historial Git.!C_RESET!
-echo.
-echo   !C_BCYAN!MODOS:!C_RESET!
-echo     !C_YELLOW!0,W!C_RESET!      !C_GRAY!Comparar ultimo commit vs estado actual!C_RESET!  !C_GREEN![recomendado]!C_RESET!
-echo     !C_YELLOW!0,3!C_RESET!      !C_GRAY!Comparar commit 0 vs commit 3!C_RESET!
-echo     !C_YELLOW!0-3!C_RESET!      !C_GRAY!Alias de 0,3!C_RESET!
-echo     !C_YELLOW![Enter]!C_RESET!  !C_GRAY!Solo ver historial!C_RESET!
-echo.
-echo   !C_BCYAN!EJEMPLOS:!C_RESET!
-echo     !C_WHITE!auditar.cmd!C_RESET!
-echo       !C_GRAY!Cuantos commits? 10!C_RESET!
-echo       !C_GRAY!Rango: 0,W!C_RESET!
-echo       !C_GRAY!-> audits\audit_2026-09-12_163200_0-WORK.txt!C_RESET!
-echo.
-echo   !C_BCYAN!SALIDA:!C_RESET!
-echo     !C_GRAY!Los reportes se guardan en audits\!C_RESET!
-echo     !C_GRAY!(excluida del repo por .gitignore^)!C_RESET!
-echo.
-goto :end
-
-:end
-call :shell_if_double_click
-endlocal
-exit /b 0
-
-:shell_if_double_click
-if "%NO_PAUSE%"=="1" goto :eof
-echo %cmdcmdline% | find /i "%~nx0" >nul
-if errorlevel 1 goto :eof
-echo.
-echo   Sesion interactiva. Escribe 'exit' para cerrar.
-echo.
-cmd /k
-goto :eof

package/templates/forge.cmd.tpl

@@ -1,114 +0,0 @@
-@echo off
-setlocal EnableDelayedExpansion
-chcp 65001 >nul 2>nul
-
-cd /d "%~dp0"
-
-REM --- Colores ANSI ---
-for /F %%a in ('echo prompt $E ^| cmd') do set "ESC=%%a"
-if "!ESC!"=="" (
-    set "C_CY=" & set "C_BC=" & set "C_GR=" & set "C_YE="
-    set "C_RE=" & set "C_GY=" & set "C_WH=" & set "C_RS="
-) else (
-    set "C_CY=!ESC![36m"  & set "C_BC=!ESC![96m"
-    set "C_GR=!ESC![32m"  & set "C_YE=!ESC![33m"
-    set "C_RE=!ESC![31m"  & set "C_GY=!ESC![90m"
-    set "C_WH=!ESC![97m"  & set "C_RS=!ESC![0m"
-)
-
-set "CMD_DIR=.forge\commands"
-
-REM --- Verificar instalacion ---
-if not exist "%CMD_DIR%\save.cmd" (
-    echo.
-    echo   !C_RE![X]!C_RS! forgeGit no esta instalado aqui.
-    echo   !C_GY!Ejecuta desde un proyecto nuevo:!C_RS! forge
-    echo.
-    pause
-    exit /b 1
-)
-
-REM --- Modo CLI directo ---
-if not "%~1"=="" (
-    if /i "%~1"=="save"   ( call "%CMD_DIR%\save.cmd"      & exit /b 0 )
-    if /i "%~1"=="push"   ( call "%CMD_DIR%\push.cmd"      & exit /b 0 )
-    if /i "%~1"=="snap"   ( call "%CMD_DIR%\snapshots.cmd" & exit /b 0 )
-    if /i "%~1"=="log"    ( call "%CMD_DIR%\historial.cmd" & exit /b 0 )
-    if /i "%~1"=="audit"  ( call "%CMD_DIR%\auditar.cmd"   & exit /b 0 )
-    if /i "%~1"=="open"   ( call "%CMD_DIR%\abrir.cmd"     & exit /b 0 )
-    if /i "%~1"=="serve"  ( call "%CMD_DIR%\serve.cmd"     & exit /b 0 )
-    if /i "%~1"=="help"   goto :help
-    if /i "%~1"=="-h"     goto :help
-    if /i "%~1"=="--help" goto :help
-    echo   !C_RE![X]!C_RS! Comando desconocido: %~1
-    echo   !C_GY!Usa: forge help!C_RS!
-    exit /b 1
-)
-
-REM ============================================================
-REM   MENU PRINCIPAL
-REM ============================================================
-:menu
-cls
-echo.
-echo   !C_CY!============================================!C_RS!
-echo   !C_BC! forgeGit!C_RS! !C_GY!- Menu!C_RS!
-echo   !C_CY!============================================!C_RS!
-echo.
-echo   !C_BC!Trabajo diario:!C_RS!
-echo     !C_YE![1]!C_RS! Guardar cambios      !C_GY!(commit)!C_RS!
-echo     !C_YE![2]!C_RS! Subir a GitHub       !C_GY!(push)!C_RS!
-echo     !C_YE![3]!C_RS! Historial            !C_GY!(ver commits)!C_RS!
-echo.
-echo   !C_BC!Herramientas:!C_RS!
-echo     !C_YE![4]!C_RS! Snapshots            !C_GY!(backup/restore)!C_RS!
-echo     !C_YE![5]!C_RS! Auditar cambios      !C_GY!(diff report)!C_RS!
-echo     !C_YE![6]!C_RS! Abrir en VS Code
-echo     !C_YE![7]!C_RS! Servidor dev         !C_GY!(auto-detect)!C_RS!
-echo.
-echo   !C_BC!Sistema:!C_RS!
-echo     !C_YE![0]!C_RS! Salir
-echo.
-echo   !C_CY!--------------------------------------------!C_RS!
-echo.
-
-set "OPT="
-set /p "OPT=  !C_BC!Opcion!C_RS!: "
-
-if "!OPT!"=="1" ( call "%CMD_DIR%\save.cmd"      & echo. & pause & goto :menu )
-if "!OPT!"=="2" ( call "%CMD_DIR%\push.cmd"      & echo. & pause & goto :menu )
-if "!OPT!"=="3" ( call "%CMD_DIR%\historial.cmd" & echo. & pause & goto :menu )
-if "!OPT!"=="4" ( call "%CMD_DIR%\snapshots.cmd" & echo. & pause & goto :menu )
-if "!OPT!"=="5" ( call "%CMD_DIR%\auditar.cmd"   & echo. & pause & goto :menu )
-if "!OPT!"=="6" ( call "%CMD_DIR%\abrir.cmd"     & echo. & pause & goto :menu )
-if "!OPT!"=="7" ( call "%CMD_DIR%\serve.cmd"     & echo. & pause & goto :menu )
-if "!OPT!"=="0" goto :end
-if /i "!OPT!"=="q" goto :end
-
-goto :menu
-
-REM ============================================================
-REM   HELP
-REM ============================================================
-:help
-echo.
-echo   !C_CY!============================================!C_RS!
-echo   !C_BC! forgeGit!C_RS! !C_GY!- Ayuda!C_RS!
-echo   !C_CY!============================================!C_RS!
-echo.
-echo   !C_BC!USO:!C_RS!
-echo     !C_WH!forge!C_RS!              Menu interactivo
-echo     !C_WH!forge save!C_RS!         Guardar cambios
-echo     !C_WH!forge push!C_RS!         Subir a GitHub
-echo     !C_WH!forge snap!C_RS!         Snapshots
-echo     !C_WH!forge log!C_RS!          Historial
-echo     !C_WH!forge audit!C_RS!        Auditar cambios
-echo     !C_WH!forge open!C_RS!         Abrir en VS Code
-echo     !C_WH!forge serve!C_RS!        Servidor de desarrollo
-echo     !C_WH!forge help!C_RS!         Esta ayuda
-echo.
-goto :end
-
-:end
-endlocal
-exit /b 0