forgegit 1.4.0 → 1.4.1

package/.forge/commands/abrir.cmd

@@ -0,0 +1,51 @@
+@echo off
+setlocal EnableDelayedExpansion
+chcp 65001 >nul 2>nul
+
+cd /d "%~dp0..\.."
+
+REM --- Colores ANSI (con fallback) ---
+for /F %%a in ('echo prompt $E ^| cmd') do set "ESC=%%a"
+if "!ESC!"=="" (
+    set "C_CY=" & set "C_BC=" & set "C_GR=" & set "C_YE="
+    set "C_RE=" & set "C_GY=" & set "C_WH=" & set "C_RS="
+) else (
+    set "C_CY=!ESC![36m"  & set "C_BC=!ESC![96m"
+    set "C_GR=!ESC![32m"  & set "C_YE=!ESC![33m"
+    set "C_RE=!ESC![31m"  & set "C_GY=!ESC![90m"
+    set "C_WH=!ESC![97m"  & set "C_RS=!ESC![0m"
+)
+
+where code >nul 2>nul
+if errorlevel 1 (
+    echo.
+    echo   !C_RE![X]!C_RS! VS Code CLI no esta en el PATH.
+    echo.
+    echo   !C_GY!Instala:!C_RS!
+    echo      !C_WH!1.!C_RS! Abre VS Code
+    echo      !C_WH!2.!C_RS! Ctrl+Shift+P
+    echo      !C_WH!3.!C_RS! "Shell Command: Install 'code' command in PATH"
+    echo.
+    call :shell_if_double_click
+    exit /b 1
+)
+
+if "%~1"=="" (
+    echo   !C_GY!Abriendo proyecto en VS Code...!C_RS!
+    code .
+) else (
+    echo   !C_GY!Abriendo en VS Code:!C_RS! !C_WH!%*!C_RS!
+    code %*
+)
+
+exit /b 0
+
+:shell_if_double_click
+if "%NO_PAUSE%"=="1" goto :eof
+echo %cmdcmdline% | find /i "%~nx0" >nul
+if errorlevel 1 goto :eof
+echo.
+echo   !C_GY!Sesion interactiva. Escribe 'exit' para cerrar.!C_RS!
+echo.
+cmd /k
+goto :eof

package/.forge/commands/auditar.cmd

@@ -0,0 +1,340 @@
+@echo off
+setlocal EnableDelayedExpansion
+chcp 65001 >nul 2>nul
+
+cd /d "%~dp0..\.."
+
+REM - Detectar soporte ANSI (Windows 10+ / Windows Terminal) -
+set "ANSI=1"
+for /F %%a in ('echo prompt $E ^| cmd') do set "ESC=%%a"
+
+REM - Fallback si no hay soporte ANSI -
+if "!ESC!"=="" set "ANSI=0"
+
+if "!ANSI!"=="1" (
+    set "C_CYAN=!ESC![36m"
+    set "C_BCYAN=!ESC![96m"
+    set "C_GREEN=!ESC![32m"
+    set "C_YELLOW=!ESC![33m"
+    set "C_RED=!ESC![31m"
+    set "C_GRAY=!ESC![90m"
+    set "C_DIM=!ESC![2m"
+    set "C_WHITE=!ESC![97m"
+    set "C_RESET=!ESC![0m"
+) else (
+    set "C_CYAN="
+    set "C_BCYAN="
+    set "C_GREEN="
+    set "C_YELLOW="
+    set "C_RED="
+    set "C_GRAY="
+    set "C_DIM="
+    set "C_WHITE="
+    set "C_RESET="
+)
+
+REM - Help flag -
+if /i "%~1"=="-help" goto :help
+if /i "%~1"=="-h"     goto :help
+if /i "%~1"=="help"   goto :help
+
+if not exist ".git" (
+    echo   !C_RED![X]!C_RESET! No hay repositorio Git. Ejecuta: init.cmd
+    exit /b 1
+)
+
+REM - Banner -
+echo.
+echo   !C_CYAN!============================================!C_RESET!
+echo   !C_BCYAN! AUDITAR!C_RESET! !C_GRAY!- Reportes de cambios!C_RESET!
+echo   !C_CYAN!============================================!C_RESET!
+echo.
+echo   !C_GRAY!Genera un .txt con los cambios entre dos puntos del!C_RESET!
+echo   !C_GRAY!historial. Ideal para auditar con IA o revisar un rango.!C_RESET!
+echo.
+
+REM - 1. Estado actual -
+for /f "tokens=*" %%b in ('git branch --show-current 2^>nul') do set "BRANCH=%%b"
+
+echo   !C_CYAN!-!C_RESET! !C_GRAY!Branch:!C_RESET!   !C_WHITE!!BRANCH!!C_RESET!
+
+git add -A >nul 2>nul
+git diff --cached --quiet
+if errorlevel 1 (
+    set "NCH=0"
+    for /f %%c in ('git diff --cached --name-only ^| find /c /v ""') do set "NCH=%%c"
+    echo   !C_CYAN!-!C_RESET! !C_GRAY!Cambios:!C_RESET!  !C_YELLOW!!NCH! archivos sin commitear!C_RESET!
+) else (
+    echo   !C_CYAN!-!C_RESET! !C_GRAY!Cambios:!C_RESET!  !C_GREEN!limpio!C_RESET!
+)
+echo.
+
+REM - 2. Cuantos commits listar -
+set "LIMIT=10"
+set "INPUT="
+set /p "INPUT=  !C_BCYAN!Cuantos commits listar?!C_RESET! !C_GRAY![10 por defecto, T=todos]!C_RESET!: "
+if /i "!INPUT!"=="T" (
+    set "LIMIT=9999"
+) else if not "!INPUT!"=="" (
+    set "LIMIT=!INPUT!"
+)
+
+REM - 3. Log a temp -
+set "TMPLOG=%TEMP%\forge_git_log.txt"
+git log -n !LIMIT! --date=format:"%%Y-%%m-%%d %%H:%%M:%%S" --pretty=format:"%%h %%ad %%s" > "!TMPLOG!" 2>nul
+
+REM - 4. Tabla con separadores -
+echo.
+echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
+echo   !C_BCYAN! HISTORIAL!C_RESET!
+echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
+echo   !C_GRAY! IDX    FECHA                 HASH      MENSAJE!C_RESET!
+echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
+
+set "IDX=0"
+set "FIRST=1"
+for /f "delims=" %%L in ('type "!TMPLOG!"') do (
+    if "!FIRST!"=="0" (
+        echo   !C_DIM!!C_GRAY!  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .!C_RESET!
+    )
+    set "LINE=%%L"
+    set "HASH=!LINE:~0,7!"
+    set "DATETIME=!LINE:~8,19!"
+    set "MSG=!LINE:~28!"
+    set "H_!IDX!=!HASH!"
+    echo   !C_BCYAN![!IDX!]!C_RESET! !C_GRAY!!DATETIME!!C_RESET!  !C_YELLOW!!HASH!!C_RESET!  !C_WHITE!!MSG!!C_RESET!
+    set /a IDX=IDX+1
+    set "FIRST=0"
+)
+del "!TMPLOG!" >nul 2>nul
+
+if !IDX! EQU 0 (
+    echo   !C_RED![X]!C_RESET! No hay commits.
+    goto :end
+)
+
+echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
+echo   !C_GRAY!Total: !IDX! commits  ^(0 = mas reciente^)!C_RESET!
+echo.
+
+REM - 5. Modos de uso (ordenados por frecuencia) -
+echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
+echo   !C_BCYAN! MODOS DE USO!C_RESET!
+echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
+echo   !C_YELLOW!0,W!C_RESET!      !C_GRAY!Comparar ultimo commit vs estado actual!C_RESET!  !C_GREEN![recomendado]!C_RESET!
+echo   !C_YELLOW!0,3!C_RESET!      !C_GRAY!Comparar commit [0] vs commit [3]!C_RESET!
+echo   !C_YELLOW!0-3!C_RESET!      !C_GRAY!Alias de 0,3!C_RESET!
+echo   !C_YELLOW![Enter]!C_RESET!  !C_GRAY!Solo ver historial (sin reporte)!C_RESET!
+echo   !C_CYAN!-------------------------------------------------------------!C_RESET!
+echo.
+
+REM - 6. Pedir rango -
+set "RANGE="
+set /p "RANGE=  !C_BCYAN!Rango a auditar:!C_RESET! !C_GRAY![Enter=0,W]!C_RESET!: "
+if "!RANGE!"=="" (
+    set "RANGE=0,W"
+    echo   !C_GRAY!Usando default: 0,W!C_RESET!
+)
+
+set "A="
+set "B="
+for /f "tokens=1,2 delims=,-" %%a in ("!RANGE!") do (
+    set "A=%%a"
+    if not "%%b"=="" set "B=%%b"
+)
+if "!A!"=="" (
+    echo   !C_RED![X]!C_RESET! Rango invalido.
+    goto :end
+)
+if "!B!"=="" set "B=!A!"
+
+if /i "!A!"=="W" (
+    echo   !C_RED![X]!C_RESET! El primer valor debe ser indice numerico. Formato: !C_YELLOW!5,W!C_RESET!
+    goto :end
+)
+if /i "!A!"=="WORK" (
+    echo   !C_RED![X]!C_RESET! El primer valor debe ser indice numerico. Formato: !C_YELLOW!5,W!C_RESET!
+    goto :end
+)
+if /i "!A!"=="HEAD" (
+    echo   !C_RED![X]!C_RESET! El primer valor debe ser indice numerico. Formato: !C_YELLOW!5,W!C_RESET!
+    goto :end
+)
+
+set "HA=!H_%A%!"
+if "!HA!"=="" (
+    echo   !C_RED![X]!C_RESET! Indice !A! no existe.
+    goto :end
+)
+
+set "H_NEW="
+set "H_OLD=!HA!"
+set "IS_WORK=0"
+
+if /i "!B!"=="W"    set "IS_WORK=1"
+if /i "!B!"=="WORK" set "IS_WORK=1"
+if /i "!B!"=="HEAD" set "IS_WORK=1"
+
+if "!IS_WORK!"=="1" (
+    set "H_OLD=!HA!"
+    set "H_NEW="
+    set "OLD_IDX=!A!"
+    set "NEW_IDX=WORK"
+    set "NEW_LABEL=working tree"
+) else (
+    set "HB=!H_%B%!"
+    if "!HB!"=="" (
+        echo   !C_RED![X]!C_RESET! Indice !B! no existe.
+        goto :end
+    )
+    set "OLD_IDX=!A!"
+    set "NEW_IDX=!B!"
+    if !A! LSS !B! (
+        set "OLD_IDX=!B!"
+        set "NEW_IDX=!A!"
+    )
+    set "H_OLD=!H_%OLD_IDX%!"
+    set "H_NEW=!H_%NEW_IDX%!"
+    set "NEW_LABEL=!H_NEW!"
+)
+
+echo.
+echo   !C_CYAN!-------------------------------------------------------------!C_RESET! !C_GRAY!Comparando:!C_RESET!
+echo       !C_GRAY![antiguo]!C_RESET!   !C_YELLOW!!H_OLD!!C_RESET!  !C_GRAY!^(idx !OLD_IDX!^)!C_RESET!
+if "!IS_WORK!"=="1" (
+    echo       !C_GRAY![reciente]!C_RESET!  !C_GREEN!working tree!C_RESET!
+) else (
+    echo       !C_GRAY![reciente]!C_RESET!  !C_YELLOW!!H_NEW!!C_RESET!  !C_GRAY!^(idx !NEW_IDX!^)!C_RESET!
+)
+echo.
+
+REM - 7. Crear audits/ -
+if not exist "audits" mkdir "audits"
+
+for /f %%i in ('powershell -NoProfile -Command "Get-Date -Format yyyy-MM-dd_HHmmss"') do set "TS=%%i"
+
+if "!IS_WORK!"=="1" (
+    set "REPORT=audits\audit_!TS!_!OLD_IDX!-WORK.txt"
+) else (
+    set "REPORT=audits\audit_!TS!_!OLD_IDX!-!NEW_IDX!.txt"
+)
+
+REM - 8. Escribir reporte (SIN colores) -
+(
+    echo # Reporte de auditoria
+    echo.
+    echo # Generado:  %DATE% %TIME%
+    echo # Proyecto:  %CD%
+    echo # Rango:     !H_OLD!  -^>  !NEW_LABEL!
+    echo.
+    if "!IS_WORK!"=="1" (
+        echo # Comparar:  git diff !H_OLD!
+    ) else (
+        echo # Comparar:  git diff !H_OLD! !H_NEW!
+    )
+    echo.
+    echo # ============================================================
+    echo # COMMITS EN EL RANGO
+    echo # ============================================================
+    echo.
+    if "!IS_WORK!"=="1" (
+        git log !H_OLD!..HEAD --date=format:"%%Y-%%m-%%d %%H:%%M:%%S" --pretty=format:"  %%ad  %%h  %%s"
+    ) else (
+        git log !H_OLD!^..!H_NEW! --date=format:"%%Y-%%m-%%d %%H:%%M:%%S" --pretty=format:"  %%ad  %%h  %%s"
+    )
+    echo.
+    echo.
+    echo # ============================================================
+    echo # DIFF COMPLETO
+    echo # ============================================================
+    echo.
+    if "!IS_WORK!"=="1" (
+        git diff !H_OLD!
+    ) else (
+        git diff !H_OLD! !H_NEW!
+    )
+    echo.
+    echo.
+    echo # ============================================================
+    echo # ESTADO ACTUAL (sin commitear)
+    echo # ============================================================
+    echo.
+    git status -short
+) > "!REPORT!" 2>&1
+
+REM - 9. Resumen -
+echo   !C_GREEN![OK]!C_RESET! Reporte generado
+echo.
+for %%f in ("!REPORT!") do set "SIZE=%%~zf"
+for /f %%l in ('find /c /v "" ^< "!REPORT!"') do set "LINES=%%l"
+
+echo       !C_GRAY!Archivo:!C_RESET!  !C_WHITE!!REPORT!!C_RESET!
+echo       !C_GRAY!Tamano:!C_RESET!   !C_WHITE!!SIZE! bytes!C_RESET!
+echo       !C_GRAY!Lineas:!C_RESET!   !C_WHITE!!LINES!!C_RESET!
+echo.
+
+REM - 10. Abrir -
+where code >nul 2>nul
+if not errorlevel 1 (
+    set "OPEN="
+    set /p "OPEN=  !C_BCYAN!Abrir en VS Code?!C_RESET! !C_GRAY![S/n]!C_RESET!: "
+    if /i not "!OPEN!"=="n" (
+        echo   !C_GRAY!Abriendo...!C_RESET!
+        code "!REPORT!"
+    )
+) else (
+    echo   !C_GRAY![INFO] VS Code CLI no disponible.!C_RESET!
+)
+
+echo.
+goto :end
+
+REM ============================================================
+REM   :help
+REM ============================================================
+:help
+echo.
+echo   !C_CYAN!============================================!C_RESET!
+echo   !C_BCYAN! AUDITAR!C_RESET! !C_GRAY!- Ayuda!C_RESET!
+echo   !C_CYAN!============================================!C_RESET!
+echo.
+echo   !C_BCYAN!USO:!C_RESET!
+echo     !C_WHITE!auditar.cmd!C_RESET!           Modo interactivo
+echo     !C_WHITE!auditar.cmd -help!C_RESET!    Esta ayuda
+echo.
+echo   !C_BCYAN!QUE HACE:!C_RESET!
+echo     !C_GRAY!Genera un reporte .txt en audits/ con los cambios!C_RESET!
+echo     !C_GRAY!entre dos puntos del historial Git.!C_RESET!
+echo.
+echo   !C_BCYAN!MODOS:!C_RESET!
+echo     !C_YELLOW!0,W!C_RESET!      !C_GRAY!Comparar ultimo commit vs estado actual!C_RESET!  !C_GREEN![recomendado]!C_RESET!
+echo     !C_YELLOW!0,3!C_RESET!      !C_GRAY!Comparar commit 0 vs commit 3!C_RESET!
+echo     !C_YELLOW!0-3!C_RESET!      !C_GRAY!Alias de 0,3!C_RESET!
+echo     !C_YELLOW![Enter]!C_RESET!  !C_GRAY!Solo ver historial!C_RESET!
+echo.
+echo   !C_BCYAN!EJEMPLOS:!C_RESET!
+echo     !C_WHITE!auditar.cmd!C_RESET!
+echo       !C_GRAY!Cuantos commits? 10!C_RESET!
+echo       !C_GRAY!Rango: 0,W!C_RESET!
+echo       !C_GRAY!-> audits\audit_2026-09-12_163200_0-WORK.txt!C_RESET!
+echo.
+echo   !C_BCYAN!SALIDA:!C_RESET!
+echo     !C_GRAY!Los reportes se guardan en audits\!C_RESET!
+echo     !C_GRAY!(excluida del repo por .gitignore^)!C_RESET!
+echo.
+goto :end
+
+:end
+call :shell_if_double_click
+endlocal
+exit /b 0
+
+:shell_if_double_click
+if "%NO_PAUSE%"=="1" goto :eof
+echo %cmdcmdline% | find /i "%~nx0" >nul
+if errorlevel 1 goto :eof
+echo.
+echo   Sesion interactiva. Escribe 'exit' para cerrar.
+echo.
+cmd /k
+goto :eof

package/.forge/commands/historial.cmd

@@ -0,0 +1,85 @@
+@echo off
+setlocal EnableDelayedExpansion
+chcp 65001 >nul 2>nul
+
+cd /d "%~dp0..\.."
+
+REM --- Colores ANSI ---
+for /F %%a in ('echo prompt $E ^| cmd') do set "ESC=%%a"
+if "!ESC!"=="" (
+    set "C_CY=" & set "C_BC=" & set "C_GR=" & set "C_YE="
+    set "C_RE=" & set "C_GY=" & set "C_WH=" & set "C_RS="
+) else (
+    set "C_CY=!ESC![36m"  & set "C_BC=!ESC![96m"
+    set "C_GR=!ESC![32m"  & set "C_YE=!ESC![33m"
+    set "C_RE=!ESC![31m"  & set "C_GY=!ESC![90m"
+    set "C_WH=!ESC![97m"  & set "C_RS=!ESC![0m"
+)
+
+echo.
+echo   !C_CY!============================================!C_RS!
+echo   !C_BC! HISTORIAL!C_RS! !C_GY!- Vista rapida del proyecto!C_RS!
+echo   !C_CY!============================================!C_RS!
+echo.
+
+REM --- COMMITS ---
+if not exist ".git" (
+    echo   !C_RE![X]!C_RS! Sin repositorio Git.
+    goto :tags
+)
+
+echo   !C_CY!-------------------------------------------------------------!C_RS!
+echo   !C_BC! ULTIMOS 20 COMMITS!C_RS!
+echo   !C_CY!-------------------------------------------------------------!C_RS!
+echo   !C_GY! IDX    FECHA                 HASH      MENSAJE!C_RS!
+echo   !C_CY!-------------------------------------------------------------!C_RS!
+
+git log -n 20 --date=format:"%%Y-%%m-%%d %%H:%%M:%%S" --pretty=format:"%%h %%ad %%s" > "%TEMP%\fgh_log.txt" 2>nul
+
+set "IDX=0"
+for /f "delims=" %%L in ('type "%TEMP%\fgh_log.txt"') do (
+    set "LINE=%%L"
+    set "HASH=!LINE:~0,7!"
+    set "DT=!LINE:~8,19!"
+    set "MSG=!LINE:~28!"
+    echo   !C_YE![!IDX!]!C_RS! !C_GY!!DT!!C_RS!  !C_YE!!HASH!!C_RS!  !C_WH!!MSG!!C_RS!
+    set /a IDX+=1
+)
+del "%TEMP%\fgh_log.txt" >nul 2>nul
+echo   !C_CY!-------------------------------------------------------------!C_RS!
+echo.
+
+:tags
+echo   !C_CY!-------------------------------------------------------------!C_RS!
+echo   !C_BC! TAGS!C_RS!
+echo   !C_CY!-------------------------------------------------------------!C_RS!
+if exist ".git" git tag -l
+echo.
+
+echo   !C_CY!-------------------------------------------------------------!C_RS!
+echo   !C_BC! SNAPSHOTS!C_RS!
+echo   !C_CY!-------------------------------------------------------------!C_RS!
+if exist "versiones" goto :show_snaps
+echo   !C_GY!sin snapshots!C_RS!
+goto :end_snaps
+
+:show_snaps
+dir /b /o-n "versiones" 2>nul
+
+:end_snaps
+echo   !C_CY!-------------------------------------------------------------!C_RS!
+echo.
+
+call :shell_if_double_click
+endlocal
+exit /b 0
+
+:shell_if_double_click
+if "%NO_PAUSE%"=="1" goto :eof
+echo %cmdcmdline% | find /i "%~nx0" >nul
+if errorlevel 1 goto :eof
+echo.
+echo   !C_GY!Sesion interactiva. Escribe 'exit' para cerrar.!C_RS!
+echo.
+cmd /k
+goto :eof

package/.forge/commands/push.cmd

@@ -0,0 +1,97 @@
+@echo off
+setlocal EnableDelayedExpansion
+chcp 65001 >nul 2>nul
+
+cd /d "%~dp0..\.."
+
+REM --- Colores ANSI (con fallback) ---
+for /F %%a in ('echo prompt $E ^| cmd') do set "ESC=%%a"
+if "!ESC!"=="" (
+    set "C_CY=" & set "C_BC=" & set "C_GR=" & set "C_YE="
+    set "C_RE=" & set "C_GY=" & set "C_WH=" & set "C_RS="
+) else (
+    set "C_CY=!ESC![36m"  & set "C_BC=!ESC![96m"
+    set "C_GR=!ESC![32m"  & set "C_YE=!ESC![33m"
+    set "C_RE=!ESC![31m"  & set "C_GY=!ESC![90m"
+    set "C_WH=!ESC![97m"  & set "C_RS=!ESC![0m"
+)
+
+echo.
+echo   !C_CY!============================================!C_RS!
+echo   !C_BC! SUBIR!C_RS! !C_GY!- Push a GitHub!C_RS!
+echo   !C_CY!============================================!C_RS!
+echo.
+
+if not exist ".git" (
+    echo   !C_RE![X]!C_RS! No hay repositorio Git. Ejecuta: !C_WH!init.cmd!C_RS!
+    call :shell_if_double_click
+    exit /b 1
+)
+
+git diff --cached --quiet
+set "STAGED=!ERRORLEVEL!"
+git diff --quiet
+set "UNSTAGED=!ERRORLEVEL!"
+
+if !STAGED! NEQ 0 goto :has_changes
+if !UNSTAGED! NEQ 0 goto :has_changes
+goto :check_remote
+
+:has_changes
+echo   !C_YE![!]!C_RS! Hay cambios sin commitear.
+echo.
+set "SAVE="
+set /p "SAVE=  !C_BC!Guardar cambios primero?!C_RS! !C_GY![S/n]!C_RS!: "
+if /i "!SAVE!"=="n" goto :check_remote
+echo.
+set "SKIP_HISTORIAL=1"
+set "NO_PAUSE=1"
+call "%~dp0save.cmd"
+set "SKIP_HISTORIAL="
+set "NO_PAUSE="
+echo.
+
+:check_remote
+git remote get-url origin >nul 2>nul
+if errorlevel 1 (
+    echo   !C_RE![X]!C_RS! No hay remote 'origin' configurado.
+    echo.
+    echo   !C_GY!Para vincular tu repo a GitHub:!C_RS!
+    echo.
+    echo     !C_WH!git remote add origin https://github.com/TU-USUARIO/TU-REPO.git!C_RS!
+    echo.
+    call :shell_if_double_click
+    exit /b 1
+)
+
+echo   !C_GY!Subiendo a GitHub...!C_RS!
+echo.
+
+git push -u origin main --follow-tags
+set "RC=!ERRORLEVEL!"
+
+echo.
+if !RC! EQU 0 (
+    echo   !C_GR![OK]!C_RS! Push completado
+) else (
+    echo   !C_RE![ERROR]!C_RS! Push fallo con codigo !RC!
+)
+echo.
+
+set "NO_PAUSE=1"
+call "%~dp0historial.cmd"
+set "NO_PAUSE="
+
+call :shell_if_double_click
+endlocal
+exit /b 0
+
+:shell_if_double_click
+if "%NO_PAUSE%"=="1" goto :eof
+echo %cmdcmdline% | find /i "%~nx0" >nul
+if errorlevel 1 goto :eof
+echo.
+echo   !C_GY!Sesion interactiva. Escribe 'exit' para cerrar.!C_RS!
+echo.
+cmd /k
+goto :eof

package/.forge/commands/save.cmd

@@ -0,0 +1,73 @@
+@echo off
+setlocal EnableDelayedExpansion
+chcp 65001 >nul 2>nul
+
+cd /d "%~dp0..\.."
+
+for /F %%a in ('echo prompt $E ^| cmd') do set "ESC=%%a"
+if "!ESC!"=="" (
+    set "C_CY=" & set "C_BC=" & set "C_GR=" & set "C_YE="
+    set "C_RE=" & set "C_GY=" & set "C_WH=" & set "C_RS="
+) else (
+    set "C_CY=!ESC![36m"  & set "C_BC=!ESC![96m"
+    set "C_GR=!ESC![32m"  & set "C_YE=!ESC![33m"
+    set "C_RE=!ESC![31m"  & set "C_GY=!ESC![90m"
+    set "C_WH=!ESC![97m"  & set "C_RS=!ESC![0m"
+)
+
+if not exist ".git" (
+    echo   !C_RE![X]!C_RS! No hay repositorio Git. Ejecuta: !C_WH!init.cmd!C_RS!
+    exit /b 1
+)
+
+git add -A >nul 2>nul
+git diff --cached --quiet
+if not errorlevel 1 (
+    echo   !C_GY!Sin cambios para guardar.!C_RS!
+    exit /b 0
+)
+
+echo.
+echo   !C_CY!------------------------------------------------------------!C_RS!
+echo   !C_BC! GUARDAR!C_RS! !C_GY!- Commit local!C_RS!
+echo   !C_CY!------------------------------------------------------------!C_RS!
+echo.
+echo   !C_GY!Archivos a guardar:!C_RS!
+git diff --cached --name-only | findstr /n "^"
+echo.
+echo   !C_GY!Evita usar: " # : + / , en el mensaje!C_RS!
+echo.
+echo   !C_BC!Mensaje del commit!C_RS! !C_GY![Enter = Sin definir]!C_RS!
+set "MSG="
+set /p MSG=
+if "!MSG!"=="" set "MSG=Sin definir"
+
+git commit -q -m "!MSG!"
+if errorlevel 1 (
+    echo.
+    echo   !C_RE![X]!C_RS! Commit fallo. Revisa el mensaje.
+    exit /b 1
+)
+echo.
+echo   !C_GR![OK]!C_RS! Commit: !C_WH!!MSG!!C_RS!
+echo.
+
+if "%SKIP_HISTORIAL%"=="1" goto :skip_hist
+set "NO_PAUSE=1"
+call "%~dp0historial.cmd"
+set "NO_PAUSE="
+:skip_hist
+
+call :shell_if_double_click
+endlocal
+exit /b 0
+
+:shell_if_double_click
+if "%NO_PAUSE%"=="1" goto :eof
+echo %cmdcmdline% | find /i "%~nx0" >nul
+if errorlevel 1 goto :eof
+echo.
+echo   !C_GY!Sesion interactiva. Escribe 'exit' para cerrar.!C_RS!
+echo.
+cmd /k
+goto :eof