fimo 2.9.0-staging.2 → 2.9.0-staging.3

package/assets/skills/fimo-studio/references/ai-chat.md

@@ -4,11 +4,11 @@ Open the **Chats** tab in the site header. On a phone, the Chat tab at the botto
 
 ## Working in Several Chats
 
-Chat has its own **Chats** tab in the site header; the tab shows how many chats have unread activity. A site can have several chats, shared by everyone on the site. The left list shows them most recently active first with a status (**Working** with a spinner while replying, **Done** once the reply finished) and their last words; a dot marks unread activity. Select **+** for a new chat (it joins the list when its first message is sent, and its name comes from that message; an empty chat offers starter requests), the search icon to find a chat, the filter icon to show only Working or Done chats, and the list settings for ordering and showing read, unread, or archived chats. The buttons above an open chat (or a right-click on a row) mark it unread, pin, archive, or mute it, for you only. To rename a chat for everyone, double-click its name above the open chat, or right-click its row and select **Rename**; Enter saves and Escape keeps the old name. The settings icon opens the chat's settings, which change its portrait (shape, eyes, mouth, color) and rename it for everyone, hold the same pin, mute and archive switches, and delete it, stopping a running reply first. Each chat has its own messages and context; when you refer to an earlier discussion, Chat searches the site's chats and answers with the messages it found. The open chat is in the page address (`/chats?chat=<id>`), so a link or reload opens the same chat.
+Chat has its own **Chats** tab in the site header; the tab shows how many chats have unread activity. A site can have several chats, shared by everyone on the site. The left list shows them most recently active first with a status (**Working** with a spinner while replying, **Done** once the reply finished) and their last words; one orange dot marks unread activity, a pending question, or both. Hover over the dot for the reason. Opening the chat clears unread activity for you; the dot stays while a question still needs your answer. Select **+** for a new chat (it joins the list when its first message is sent, and its name comes from that message; an empty chat offers starter requests), the search icon to find a chat, the filter icon to show only Working or Done chats, and the list settings for ordering and showing read, unread, or archived chats. The buttons above an open chat (or a right-click on a row) mark it unread, pin, archive, or mute it, for you only. To rename a chat for everyone, double-click its name above the open chat, or right-click its row and select **Rename**; Enter saves and Escape keeps the old name. The settings icon opens the chat's settings, which change its portrait (shape, eyes, mouth, color) and rename it for everyone, hold the same pin, mute and archive switches, and delete it, stopping a running reply first. Each chat has its own messages and context; when you refer to an earlier discussion, Chat searches the site's chats and answers with the messages it found. The open chat is in the page address (`/chats?chat=<id>`), so a link or reload opens the same chat.
 
 ## Agents
 
-Agents and routines appear only when the organization has the agents feature, which is off by default in production. Without it, the **+** above the chat list opens a new chat directly, agent settings have no **Routines**, and existing routines do not run; ask Fimo support to enable it. The plan decides the agents (FIMO-2856): Free has the SEO and GEO default agents, each running only its weekly checkup (**Weekly SEO checkup**, **Weekly AI check**), and its agent settings list the routines Starter adds with **See plans**; Starter (pay-as-you-go) has every default agent with its detailed routines, and a change wakes each routine at most once a day (the changes made meanwhile wait and the next run, a day after the last one started, checks them together; the routine's next run shows when, and **Run now** and schedules never wait); Pro runs them right after each change and adds agents of one's own (**New agent**). In the **+** menu, what the plan does not include shows **Upgrade** and opens the plans. Default agents are Fimo's: their routines follow Fimo's instructions, only switch off and on or get deleted (a deleted one stays deleted), and nothing is added to them (`routine_is_default`); routines of one's own live in a custom agent, on Pro (`routine_needs_pro` below Pro). A plan change changes which agents open and which routines run; agents, routines and past runs stay. Fimo support can give an organization Pro's agents on any plan. A routine Fimo retires from a default agent stops running and leaves the list.
+Agents and routines appear only when the organization has the agents feature, which is off by default in production. Without it, the **+** above the chat list opens a new chat directly, agent settings have no **Routines**, and existing routines do not run; ask Fimo support to enable it. The plan decides the agents (FIMO-2856): Free has the SEO and GEO default agents, each running only its weekly checkup (**Weekly SEO checkup**, **Weekly AI check**), and its agent settings list the routines Starter adds with **See plans**; Starter (pay-as-you-go) has every default agent with its detailed routines, and a change wakes each routine at most once a day (the changes made meanwhile wait and the next run, a day after the last one started, checks them together; the routine's next run shows when, and **Run now** and schedules never wait); Pro runs them right after each change and adds agents of one's own (**New agent**). In the **+** menu, what the plan does not include shows **Upgrade** and opens the plans. Default agents are Fimo's: their routines follow Fimo's instructions, only switch off and on or get deleted (a deleted one stays deleted), and nothing is added to them (`routine_is_default`); routines of one's own live in a custom agent, on Pro (`routine_needs_pro` below Pro). A default agent's name, description and portrait cannot be changed on any plan, and a custom agent's change only on Pro: below Pro its settings are read-only, say its routines are paused and offer **See plans**, and it can still be deleted. A plan change changes which agents open and which routines run; agents, routines and past runs stay. Fimo support can give an organization Pro's agents on any plan. A routine Fimo retires from a default agent stops running and leaves the list.
 
 An agent is a chat with a job: a name and a description that Fimo reads at the start of every reply in that chat. Agents are shared like any chat and are listed as soon as they are created, with an **Agent** tag after the name. The **+** above the chat list is a menu: **New chat** (blank), **New agent** (a name and a description, then the empty agent opens), and under **Agents** Fimo's default agents (**SEO**, **GEO**, **Content**, **Quality**, **Compliance**); a new site starts with SEO and GEO listed, their routines active from the start; Content, Quality and Compliance, and every default on an older site, are created the first time someone selects them, routines active, the same chat every time after. In an agent, the description shows next to its name in the header (one line) and the empty state introduces the agent by name and job (the description's first three lines); a cut description shows whole on hover, or on tap on a phone, and the message box reads **Message <name>**. The agent's settings page has a **Description** field, shared with everyone; empty means none. The filter icon's **Kind** option shows only chats or only agents; search finds an agent by its name.
 
@@ -24,7 +24,7 @@ The **Compliance** default runs three routines backed by Studio's built-in `fimo
 
 ### Routines
 
-A routine is saved instructions an agent runs in a thread of its own, by hand, on a schedule, or when something happens in the project, so each run sees its earlier runs and the agent's chat never fills with its work. The agent creates, changes, runs and deletes its routines from its chat with its `routines` tool: a person asks in the chat ("check the prices every Monday", "run after each publish"), and Studio only shows routines. A trigger is set in words; Fimo checks them and either says when the routine runs or why it cannot follow them and what it can do instead; for what Fimo cannot see as an event (traffic, rankings, errors) the agent offers a schedule whose run checks it and stops when there is nothing to do. Fimo follows publishes of the site (or only its first publish) and content changes on the main branch by content type, action, locale, changed fields, the entry's current values ("price over 100", "status changes to archived") or a yes/no question about what the content says ("mentions Contentful or Sanity"; for "a competitor" it uses the names given or those in the site knowledge, and asks for them otherwise; a run started on an uncertain answer says so), media files uploaded or changed (by name or file type), the site's code changing through a deploy or a merge (by file path glob, or a yes/no question about the changed files such as "a page was added"), another routine of the same agent finishing (optionally with a yes/no question about its report; never its own end), a visitor submitting a form (optionally with a yes/no question about the answers), a form or content type changing, a branch merged into main, a locale added, removed or made the default, a publish of the site failing, a domain added or removed, and the prices on a page of another web site changing ("tell me when https://example.com/pricing changes its prices": checked daily, a change must hold on three reads before the routine runs, the run lists each plan with its old and new price, the routine page shows the watch as **OK**, **Needs repair**, **Blocked** or **Unstable** with its last check, at most 10 watched pages a project); comparing a field's old and new values is not supported; what a routine changes, publishes or reports can start the agent's other routines, in chains of any length, each routine at most once per change that started the chain (across every routine that change leads to, so routines never loop or multiply; a person's new change, a run by hand or on a schedule starts a new chain); events that come in while a run is busy wait, then run together in one next run (up to 10), which the Runs list shows as one run with its event count; the agent can also make a routine's event runs wait until the changes stop for a set number of minutes (at most 2 hours from the first), then read them all in one run. The agent's settings list its **Routines** as cards (name, when it runs such as its event trigger's title, **Every Monday at 08:00** or **By hand**, next run, an **Active** switch); the default agents come with theirs (a new project's defaults wake on changes from five minutes after it is created, so its first push and seed start no run). A routine's page is read-only: **Instructions** (the task, run on every trigger), **Model** (the model its runs use: Opus 5.5 by default, while most default routines run on Claude Haiku 5.5 or Claude Sonnet 5; the agent sets another when asked), **Triggers** (**By hand** with **Run now**, which starts a run right away; **Schedule** and the event trigger, given a short title by Fimo from the words it was set with, each a sentence, shown when set), the **Runs** list (newest first, two lines each: how it ended (**Quiet**, **Sent to agent**, **Asked for a decision**, or **Failed** and **Stopped** in red), when and what started it (**On schedule**, **On event**, or **By hand** with the person's name or **agent** when their message started it), then the first sentence of what it told the agent; select one to open the routine's thread, read-only, at that run), and the **Active** switch in the header (pauses the schedule and the trigger, not **Run now**). Routines report to the agent, never to a person: a run that has something the agent should know writes it to the agent's chat as a message only the agent reads, and the agent takes a turn on it (reports waiting together are read in one turn); a run with nothing to say reports nothing. The agent decides what the team sees: nothing (the chat stays as it was, the row stays read), one short message (several reports folded into one), or a form when a person must decide, and the chat's row reads **Needs you** while that form is open. A person answers the form in the chat; the agent sends the decision to the routine with its `routines` tool and the routine runs again with it. Only the agent answers a routine: its page has no answer box. Quiet runs leave no message: they fold into one line placed where the last run happened among the messages (**N runs since <date>**), counted from the last report the agent answered visibly, and the chat's row reads **Ran <date>** with that count while the newest thing in the chat is a run, the ordinary status and the last words when a message is newer, and **First check <day> <time>** or **No checks scheduled** before the first run. A routine whose runs keep failing or are refused for credits is reported to the agent once per streak, as a message from Fimo. Routine runs use the plan's agent-hours, from each run's start to its end (Studio chats do not); Billing shows the hours used this period, and each run shows its duration and credits. Once the included hours are used, nothing runs (no schedule, event or Run now, which the routines tool reports to the agent); Studio shows **Routines paused** under the chat list and in the agent's settings with the reset date and the button that resumes them sooner (**Upgrade**), and the routine's page says until when. No run lasts longer than 2 hours.
+A routine is saved instructions an agent runs in a thread of its own, by hand, on a schedule, or when something happens in the project, so each run sees its earlier runs and the agent's chat never fills with its work. The agent creates, changes, runs and deletes its routines from its chat with its `routines` tool: a person asks in the chat ("check the prices every Monday", "run after each publish"), and Studio only shows routines. A trigger is set in words; Fimo checks them and either says when the routine runs or why it cannot follow them and what it can do instead; for what Fimo cannot see as an event (traffic, rankings, errors) the agent offers a schedule whose run checks it and stops when there is nothing to do. Fimo follows publishes of the site (or only its first publish) and content changes on the main branch by content type, action, locale, changed fields, the entry's current values ("price over 100", "status changes to archived") or a yes/no question about what the content says ("mentions Contentful or Sanity"; for "a competitor" it uses the names given or those in the site knowledge, and asks for them otherwise; a run started on an uncertain answer says so), media files uploaded or changed (by name or file type), the site's code changing through a deploy or a merge (by file path glob, or a yes/no question about the changed files such as "a page was added"), another routine of the same agent finishing (optionally with a yes/no question about its report; never its own end), a visitor submitting a form (optionally with a yes/no question about the answers), a form or content type changing, a branch merged into main, a locale added, removed or made the default, a publish of the site failing, a domain added or removed, and the prices on a page of another web site changing ("tell me when https://example.com/pricing changes its prices": checked daily, a change must hold on three reads before the routine runs, the run lists each plan with its old and new price, the routine page shows the watch as **OK**, **Needs repair**, **Blocked** or **Unstable** with its last check, at most 10 watched pages a project); comparing a field's old and new values is not supported; what a routine changes, publishes or reports can start the agent's other routines, in chains of any length, each routine at most once per change that started the chain (across every routine that change leads to, so routines never loop or multiply; a person's new change, a run by hand or on a schedule starts a new chain); events that come in while a run is busy wait, then run together in one next run (up to 10), which the Runs list shows as one run with its event count; the agent can also make a routine's event runs wait until the changes stop for a set number of minutes (at most 2 hours from the first), then read them all in one run; the default routines that read what changed (Meta tags, Image SEO, Internal linking, Structured data, AI citation optimization, Content lifecycle, Translation, Accessibility, Mobile optimization, Brand compliance) wait 10 minutes after the last change, and those that guard the live site (Technical SEO, Broken links, Hreflang, AI readiness, Cookie consent, Privacy and legal pages) run at once. The agent's settings list its **Routines** as cards (name, when it runs such as its event trigger's title, **Every Monday at 08:00** or **By hand**, next run, an **Active** switch); the default agents come with theirs (a new project's defaults wake on changes from five minutes after it is created, so its first push and seed start no run). A routine's page is read-only: **Instructions** (the task, run on every trigger), **Model** (the model its runs use: Opus 5.5 by default, while most default routines run on Claude Haiku 5.5 or Claude Sonnet 5; the agent sets another when asked), **Triggers** (**By hand** with **Run now**, which starts a run right away; **Schedule** and the event trigger, given a short title by Fimo from the words it was set with, each a sentence, shown when set), the **Runs** list (newest first, two lines each: how it ended (**Quiet**, **Sent to agent**, **Asked for a decision**, or **Failed** and **Stopped** in red), when and what started it (**On schedule**, **On event**, or **By hand** with the person's name or **agent** when their message started it), then the first sentence of what it told the agent; select one to open the routine's thread, read-only, at that run), and the **Active** switch in the header (pauses the schedule and the trigger, not **Run now**). Routines report to the agent, never to a person: a run that has something the agent should know writes it to the agent's chat as a message only the agent reads, and the agent takes a turn on it (reports waiting together are read in one turn); a run with nothing to say reports nothing. The agent decides what the team sees: nothing (the chat stays as it was, the row stays read), one short message (several reports folded into one), or a form when a person must decide, and the chat's row reads **Needs you** while that form is open. A person answers the form in the chat; the agent sends the decision to the routine with its `routines` tool and the routine runs again with it. Only the agent answers a routine: its page has no answer box. Quiet runs leave no message: they fold into one line placed where the last run happened among the messages (**N runs since <date>**), counted from the last report the agent answered visibly, and the chat's row reads **Ran <date>** with that count while the newest thing in the chat is a run, the ordinary status and the last words when a message is newer, and **First check <day> <time>** or **No checks scheduled** before the first run. A routine whose runs keep failing or are refused for credits is reported to the agent once per streak, as a message from Fimo. Routine runs use the plan's agent-hours, from each run's start to its end (Studio chats do not); Billing shows the hours used this period, and each run shows its duration and credits. Once the included hours are used, nothing runs (no schedule, event or Run now, which the routines tool reports to the agent); Studio shows **Routines paused** under the chat list and in the agent's settings with the reset date and the button that resumes them sooner (**Upgrade**), and the routine's page says until when. No run lasts longer than 2 hours.
 
 ## Sending a Message
 

package/dist/cli/bundle.json

@@ -1,7 +1,7 @@
 {
   "bundled": true,
   "bundler": "esbuild",
-  "bundledAt": "2026-10-20T15:35:13.754Z",
+  "bundledAt": "2026-10-20T18:36:10.758Z",
   "cliVersion": "2.8.0",
   "external": [
     "oxc-parser",