exiftool-vendored.pl 12.33.0 → 12.40.0

package/bin/lib/Image/ExifTool/Exif.pm

@@ -56,7 +56,7 @@ use vars qw($VERSION $AUTOLOAD @formatSize @formatName %formatNumber %intFormat
 use Image::ExifTool qw(:DataAccess :Utils);
 use Image::ExifTool::MakerNotes;
 
-$VERSION = '4.37';
+$VERSION = '4.39';
 
 sub ProcessExif($$$);
 sub WriteExif($$$);
@@ -415,7 +415,14 @@ my %opcodeInfo = (
         WriteGroup => 'IFD0',
         # set priority directory if this is the full resolution image
         DataMember => 'SubfileType',
-        RawConv => '$self->SetPriorityDir() if $val eq "0"; $$self{SubfileType} = $val',
+        RawConv => q{
+            if ($val == ($val & 0x02)) {
+                $self->SetPriorityDir() if $val == 0;
+                $$self{PageCount} = ($$self{PageCount} || 0) + 1;
+                $$self{MultiPage} = 1 if $val == 2 or $$self{PageCount} > 1;
+            }
+            $$self{SubfileType} = $val;
+        },
         PrintConv => \%subfileType,
     },
     0xff => {
@@ -425,7 +432,14 @@ my %opcodeInfo = (
         Writable => 'int16u',
         WriteGroup => 'IFD0',
         # set priority directory if this is the full resolution image
-        RawConv => '$self->SetPriorityDir() if $val eq "1"; $val',
+        RawConv => q{
+            if ($val == 1 or $val == 3) {
+                $self->SetPriorityDir() if $val == 1;
+                $$self{PageCount} = ($$self{PageCount} || 0) + 1;
+                $$self{MultiPage} = 1 if $val == 3 or $$self{PageCount} > 1;
+            }
+            $val;
+        },
         PrintConv => {
             1 => 'Full-resolution image',
             2 => 'Reduced-resolution image',
@@ -2144,7 +2158,7 @@ my %opcodeInfo = (
         Notes => 'displayed in seconds, but stored as an APEX value',
         Format => 'rational64s', # Leica M8 patch (incorrectly written as rational64u)
         Writable => 'rational64s',
-        ValueConv => 'abs($val)<100 ? 2**(-$val) : 0',
+        ValueConv => 'IsFloat($val) && abs($val)<100 ? 2**(-$val) : 0',
         ValueConvInv => '$val>0 ? -log($val)/log(2) : -100',
         PrintConv => 'Image::ExifTool::Exif::PrintExposureTime($val)',
         PrintConvInv => 'Image::ExifTool::Exif::ConvertFraction($val)',
@@ -4816,11 +4830,32 @@ my %subSecConv = (
     },
     GPSPosition => {
         Groups => { 2 => 'Location' },
+        Writable => 1,
+        Protected => 1,
+        WriteAlso => {
+            GPSLatitude => '$val =~ /(.*?)( ?[NS])?,/ ? $1 : undef',
+            GPSLatitudeRef => '$val =~ /(-?)(.*?) ?([NS]?),/ ? ($3 || ($1 ? "S" : "N")) : undef',
+            GPSLongitude => '$val =~ /, ?(.*?)( ?[EW]?)$/ ? $1 : undef',
+            GPSLongitudeRef => '$val =~ /, ?(-?)(.*?) ?([EW]?)$/ ? ($3 || ($1 ? "W" : "E")) : undef',
+        },
+        PrintConvInv => q{
+            return undef unless $val =~ /(.*? ?[NS]?), ?(.*? ?[EW]?)$/;
+            my ($lat, $lon) = ($1, $2);
+            require Image::ExifTool::GPS;
+            $lat = Image::ExifTool::GPS::ToDegrees($lat, 1, "lat");
+            $lon = Image::ExifTool::GPS::ToDegrees($lon, 1, "lon");
+            return "$lat, $lon";
+        },
         Require => {
             0 => 'GPSLatitude',
             1 => 'GPSLongitude',
         },
         Priority => 0,
+        Notes => q{
+            when written, writes GPSLatitude, GPSLatitudeRef, GPSLongitude and
+            GPSLongitudeRef.  This tag may be written using the same coordinate
+            format as provided by Google Maps when right-clicking on a location
+        },
         ValueConv => '(length($val[0]) or length($val[1])) ? "$val[0] $val[1]" : undef',
         PrintConv => '"$prt[0], $prt[1]"',
     },
@@ -5228,6 +5263,7 @@ sub RedBlueBalance($@)
 sub PrintExposureTime($)
 {
     my $secs = shift;
+    return $secs unless Image::ExifTool::IsFloat($secs);
     if ($secs < 0.25001 and $secs > 0) {
         return sprintf("1/%d",int(0.5 + 1/$secs));
     }
@@ -5833,7 +5869,7 @@ sub ProcessExif($$$)
         unless ($path =~ /^(JPEG-APP1-IFD0|TIFF-IFD0|PSD-EXIFInfo-IFD0)$/) {
             if ($Image::ExifTool::MWG::strict) {
                 $et->Warn("Ignored non-standard EXIF at $path");
-                return 1;
+                return 0;
             } else {
                 $et->Warn("Non-standard EXIF at $path", 1);
             }
@@ -5876,10 +5912,6 @@ sub ProcessExif($$$)
                 # also read next IFD pointer if available
                 if ($raf->Read($buf2, $len+4) >= $len) {
                     $buff .= $buf2;
-                    # make copy of dirInfo since we're going to modify it
-                    my %newDirInfo = %$dirInfo;
-                    $dirInfo = \%newDirInfo;
-                    # update directory parameters for the newly loaded IFD
                     $dataPt = $$dirInfo{DataPt} = \$buff;
                     $dataPos = $$dirInfo{DataPos} = $offset;
                     $dataLen = $$dirInfo{DataLen} = length $buff;
@@ -6686,28 +6718,40 @@ sub ProcessExif($$$)
 
     # scan for subsequent IFD's if specified
     if ($$dirInfo{Multi} and $bytesFromEnd >= 4) {
-        my $offset = Get32u($dataPt, $dirEnd);
-        if ($offset) {
-            my $subdirStart = $offset - $dataPos;
-            # use same directory information for trailing directory,
-            # but change the start location (ProcessDirectory will
-            # test to make sure we don't reprocess the same dir twice)
-            my %newDirInfo = %$dirInfo;
-            $newDirInfo{DirStart} = $subdirStart;
+        # use same directory information for trailing directory,
+        # but change the start location (ProcessDirectory will
+        # test to make sure we don't reprocess the same dir twice)
+        my %newDirInfo = %$dirInfo;
+        $newDirInfo{Multi} = 0;  # prevent recursion
+        $newDirInfo{OffsetName} = $nextOffName;
+        $$et{INDENT} =~ s/..$//; # keep indent the same
+        for (;;) {
+            my $offset = Get32u($dataPt, $dirEnd) or last;
+            $newDirInfo{DirStart} = $offset - $dataPos;
             # increment IFD number
             my $ifdNum = $newDirInfo{DirName} =~ s/(\d+)$// ? $1 : 0;
             $newDirInfo{DirName} .= $ifdNum + 1;
-            $newDirInfo{OffsetName} = $nextOffName;
             # must validate SubIFD1 because the nextIFD pointer is invalid for some RAW formats
             if ($newDirInfo{DirName} ne 'SubIFD1' or ValidateIFD(\%newDirInfo)) {
-                $$et{INDENT} =~ s/..$//; # keep indent the same
                 my $cur = pop @{$$et{PATH}};
                 $et->ProcessDirectory(\%newDirInfo, $tagTablePtr) or $success = 0;
                 push @{$$et{PATH}}, $cur;
+                if ($success and $newDirInfo{BytesFromEnd} >= 4) {
+                    $dataPt = $newDirInfo{DataPt};
+                    $dataPos = $newDirInfo{DataPos};
+                    $dirEnd = $newDirInfo{DirEnd};
+                    next;
+                }
             } elsif ($verbose or $$et{TIFF_TYPE} eq 'TIFF') {
                 $et->Warn('Ignored bad IFD linked from SubIFD');
             }
+            last;
         }
+    } elsif (defined $$dirInfo{Multi}) {
+        # return necessary parameters for parsing next IFD
+        $$dirInfo{DirEnd} = $dirEnd;
+        $$dirInfo{OffsetName} = $nextOffName;
+        $$dirInfo{BytesFromEnd} = $bytesFromEnd;
     }
     return $success;
 }
@@ -6731,7 +6775,7 @@ EXIF and TIFF meta information.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/FITS.pm

@@ -137,7 +137,7 @@ information from FITS (Flexible Image Transport System) images.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/FLAC.pm

@@ -284,7 +284,7 @@ information from Free Lossless Audio Codec (FLAC) audio files.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/FLIF.pm

@@ -329,7 +329,7 @@ meta information in FLIF (Free Lossless Image Format) images.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/FLIR.pm

@@ -24,7 +24,7 @@ use Image::ExifTool qw(:DataAccess :Utils);
 use Image::ExifTool::Exif;
 use Image::ExifTool::GPS;
 
-$VERSION = '1.18';
+$VERSION = '1.20';
 
 sub ProcessFLIR($$;$);
 sub ProcessFLIRText($$$);
@@ -99,7 +99,7 @@ my %float8g = ( Format => 'float', PrintConv => 'sprintf("%.8g",$val)' );
     NOTES => q{
         Information extracted from FLIR FFF images and the APP1 FLIR segment of JPEG
         images.  These tags may also be extracted from the first frame of an FLIR
-        SEQ file.
+        SEQ file, or all frames if the ExtractEmbedded option is used.
     },
     "_header" => {
         Name => 'FFFHeader',
@@ -691,7 +691,15 @@ my %float8g = ( Format => 'float', PrintConv => 'sprintf("%.8g",$val)' );
             T => 'True North',
         },
     },
-  # 0x48 - int32u: seen 0,77
+    0x48 => { #PH (NC)
+        Name => 'GPSImgDirectionRef',
+        Format => 'string[2]',
+        RawConv => 'length($val) ? $val : undef',
+        PrintConv => {
+            M => 'Magnetic North',
+            T => 'True North',
+        },
+    },
     0x4c => {
         Name => 'GPSSpeed',
         %float2f,
@@ -702,7 +710,11 @@ my %float8g = ( Format => 'float', PrintConv => 'sprintf("%.8g",$val)' );
         %float2f,
         RawConv => '$val < 0 ? undef : $val',
     },
-  # 0x54 - float: seen 0,-1
+    0x54 => {
+        Name => 'GPSImgDirection',
+        %float2f,
+        RawConv => '$val < 0 ? undef : $val',
+    },
     0x58 => {
         Name => 'GPSMapDatum',
         Format => 'string[16]',
@@ -1457,6 +1469,7 @@ sub ProcessFLIR($$;$)
     my $raf = $$dirInfo{RAF} || new File::RandomAccess($$dirInfo{DataPt});
     my $verbose = $et->Options('Verbose');
     my $out = $et->Options('TextOut');
+    my $base = $raf->Tell();
     my ($i, $hdr, $buff, $rec);
 
     # read and verify FFF header
@@ -1485,15 +1498,18 @@ sub ProcessFLIR($$;$)
         my $ver = Get32u(\$hdr, 0x14);
         last if $ver >= 100 and $ver < 200; # (have seen 100 and 101 - PH)
         ToggleByteOrder();
-        $i and $et->Warn("Unsupported FLIR $type version"), return 1;
+        next unless $i;
+        return 0 if $$et{DOC_NUM};
+        $et->Warn("Unsupported FLIR $type version");
+        return 1;
     }
 
     # read the FLIR record directory
     my $pos = Get32u(\$hdr, 0x18);
     my $num = Get32u(\$hdr, 0x1c);
-    unless ($raf->Seek($pos) and $raf->Read($buff, $num * 0x20) == $num * 0x20) {
+    unless ($raf->Seek($base+$pos) and $raf->Read($buff, $num * 0x20) == $num * 0x20) {
         $et->Warn('Truncated FLIR FFF directory');
-        return 1;
+        return $$et{DOC_NUM} ? 0 : 1;
     }
 
     unless ($tagTablePtr) {
@@ -1504,6 +1520,7 @@ sub ProcessFLIR($$;$)
     # process the header data
     $et->HandleTag($tagTablePtr, '_header', $hdr);
 
+    my $success = 1;
     my $oldIndent = $$et{INDENT};
     $$et{INDENT} .= '| ';
     $et->VerboseDir($type, $num);
@@ -1533,12 +1550,22 @@ sub ProcessFLIR($$;$)
         $verbose and printf $out "%s%d) FLIR Record 0x%.2x, offset 0x%.4x, length 0x%.4x\n",
                                  $$et{INDENT}, $i, $recType, $recPos, $recLen;
 
-        unless ($raf->Seek($recPos) and $raf->Read($rec, $recLen) == $recLen) {
-            $et->Warn('Invalid FLIR record');
+        # skip RawData records for embedded documents
+        if ($recType == 1 and $$et{DOC_NUM}) {
+            $raf->Seek($base+$recPos+$recLen) or $success = 0, last;
+            next;
+        }
+        unless ($raf->Seek($base+$recPos) and $raf->Read($rec, $recLen) == $recLen) {
+            if ($$et{DOC_NUM}) {
+                $success = 0;   # abort processing more documents
+            } else {
+                $et->Warn('Invalid FLIR record');
+            }
             last;
         }
         if ($$tagTablePtr{$recType}) {
             $et->HandleTag($tagTablePtr, $recType, undef,
+                Base    => $base,
                 DataPt  => \$rec,
                 DataPos => $recPos,
                 Start   => 0,
@@ -1550,7 +1577,17 @@ sub ProcessFLIR($$;$)
     }
     delete $$et{SET_GROUP0};
     $$et{INDENT} = $oldIndent;
-    return 1;
+
+    # extract information from subsequent frames in SEQ file if ExtractEmbedded is used
+    if ($$dirInfo{RAF} and $et->Options('ExtractEmbedded') and not $$et{DOC_NUM}) {
+        for (;;) {
+            $$et{DOC_NUM} = $$et{DOC_COUNT} + 1;
+            last unless ProcessFLIR($et, $dirInfo, $tagTablePtr);
+            # (DOC_COUNT will be incremented automatically if we extracted any tags)
+        }
+        delete $$et{DOC_NUM};
+    }
+    return $success;
 }
 
 #------------------------------------------------------------------------------
@@ -1594,7 +1631,7 @@ Systems Inc. thermal image files (FFF, FPF and JPEG format).
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/Fixup.pm

@@ -354,7 +354,7 @@ linear list when ApplyFixups() is called.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/Flash.pm

@@ -721,7 +721,7 @@ will add AMF3 support.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/FlashPix.pm

@@ -2395,7 +2395,7 @@ JPEG images.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/Font.pm

@@ -622,7 +622,7 @@ extracted from these formats.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/FotoStation.pm

@@ -243,7 +243,7 @@ write information from the FotoWare FotoStation trailer.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/FujiFilm.pm

@@ -1670,7 +1670,7 @@ FujiFilm maker notes in EXIF information, and to read/write FujiFilm RAW
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/GE.pm

@@ -68,7 +68,7 @@ General Imaging maker notes.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/GIF.pm

@@ -20,7 +20,7 @@ use strict;
 use vars qw($VERSION);
 use Image::ExifTool qw(:DataAccess :Utils);
 
-$VERSION = '1.18';
+$VERSION = '1.19';
 
 # road map of directory locations in GIF images
 my %gifMap = (
@@ -54,6 +54,7 @@ my %gifMap = (
     Extensions => { # (for documentation only)
         SubDirectory => { TagTable => 'Image::ExifTool::GIF::Extensions' },
     },
+    TransparentColor => { },
 );
 
 # GIF89a application extensions:
@@ -475,6 +476,9 @@ Block:
             my $delay = Get16u(\$buff, 1);
             $delayTime += $delay;
             $verbose and printf $out "Graphic Control: delay=%.2f\n", $delay / 100;
+            # get transparent colour
+            my $bits = Get8u(\$buff, 0);
+            $et->HandleTag($tagTablePtr, 'TransparentColor', Get8u(\$buff,3)) if $bits & 0x01;
             $raf->Seek(-$length, 1) or last;
 
         } elsif ($a == 0x01 and $length == 12) {    # plain text extension
@@ -537,7 +541,7 @@ write GIF meta information.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/GIMP.pm

@@ -270,7 +270,7 @@ GIMP software.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/GPS.pm

@@ -137,22 +137,26 @@ my %coordConv = (
             my ($v, $et) = @_;
             $v = $et->TimeNow() if lc($v) eq 'now';
             my @tz;
-            if ($v =~ s/([-+])(.*)//s) {    # remove timezone
+            if ($v =~ s/([-+])(\d{1,2}):?(\d{2})\s*(DST)?$//i) {    # remove timezone
                 my $s = $1 eq '-' ? 1 : -1; # opposite sign to convert back to UTC
                 my $t = $2;
-                @tz = ($s*$1, $s*$2) if $t =~ /^(\d{2}):?(\d{2})\s*$/;
+                @tz = ($s*$2, $s*$3);
             }
-            my @a = ($v =~ /((?=\d|\.\d)\d*(?:\.\d*)?)/g);
-            push @a, '00' while @a < 3;
+            # (note: we must allow '.' as a time separator, eg. '10.30.00', with is tricky due to decimal seconds)
+            # YYYYmmddHHMMSS[.ss] format
+            my @a = ($v =~ /^[^\d]*\d{4}[^\d]*\d{1,2}[^\d]*\d{1,2}[^\d]*(\d{1,2})[^\d]*(\d{2})[^\d]*(\d{2}(?:\.\d+)?)[^\d]*$/);
+            # HHMMSS[.ss] format
+            @a or @a = ($v =~ /^[^\d]*(\d{1,2})[^\d]*(\d{2})[^\d]*(\d{2}(?:\.\d+)?)[^\d]*$/);
+            @a or warn('Invalid time (use HH:MM:SS[.ss][+/-HH:MM|Z])'), return undef;
             if (@tz) {
                 # adjust to UTC
-                $a[-2] += $tz[1];
-                $a[-3] += $tz[0];
-                while ($a[-2] >= 60) { $a[-2] -= 60; ++$a[-3] }
-                while ($a[-2] < 0)   { $a[-2] += 60; --$a[-3] }
-                $a[-3] = ($a[-3] + 24) % 24;
+                $a[1] += $tz[1];
+                $a[0] += $tz[0];
+                while ($a[1] >= 60) { $a[1] -= 60; ++$a[0] }
+                while ($a[1] < 0)   { $a[1] += 60; --$a[0] }
+                $a[0] = ($a[0] + 24) % 24;
             }
-            return "$a[-3]:$a[-2]:$a[-1]";
+            return join(':', @a);
         },
     },
     0x0008 => {
@@ -575,7 +579,7 @@ GPS (Global Positioning System) meta information in EXIF data.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/GeoTiff.pm

@@ -2242,7 +2242,7 @@ coordinates.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/Geotag.pm

@@ -28,7 +28,7 @@ use vars qw($VERSION);
 use Image::ExifTool qw(:Public);
 use Image::ExifTool::GPS;
 
-$VERSION = '1.65';
+$VERSION = '1.66';
 
 sub JITTER() { return 2 }       # maximum time jitter
 
@@ -210,13 +210,14 @@ sub LoadTrackLog($$;$)
         $raf->ReadLine($_) or last;
         # determine file format
         if (not $format) {
+            s/^\xef\xbb\xbf//;          # remove leading BOM if it exists
             if (/^<(\?xml|gpx)[\s>]/) { # look for XML or GPX header
                 $format = 'XML';
             # check for NMEA sentence
             # (must ONLY start with ones that have timestamps! eg. not GSA or PTNTHPR!)
             } elsif (/^.*\$([A-Z]{2}(RMC|GGA|GLL|ZDA)|PMGNTRK),/) {
                 $format = 'NMEA';
-                $nmeaStart = $2 || $1;    # save type of first sentence
+                $nmeaStart = $2 || $1;  # save type of first sentence
             } elsif (/^A(FLA|XSY|FIL)/) {
                 # (don't set format yet because we want to read HFDTE first)
                 $nmeaStart = 'B' ;
@@ -1423,7 +1424,7 @@ user-defined tag GPSRoll, must be active.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/GoPro.pm

@@ -733,7 +733,7 @@ metadata from GoPro MP4 videos.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/H264.pm

@@ -1123,7 +1123,7 @@ information from H.264 video streams.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/HP.pm

@@ -250,7 +250,7 @@ Hewlett-Packard maker notes.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/HTML.pm

@@ -555,7 +555,7 @@ meta information from HTML documents.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.

package/bin/lib/Image/ExifTool/HtmlDump.pm

@@ -917,7 +917,7 @@ page.
 
 =head1 AUTHOR
 
-Copyright 2003-2021, Phil Harvey (philharvey66 at gmail.com)
+Copyright 2003-2022, Phil Harvey (philharvey66 at gmail.com)
 
 This library is free software; you can redistribute it and/or modify it
 under the same terms as Perl itself.