ember-cli 4.0.0 → 4.1.0-beta.1

package/docs/perf-guide.md

@@ -1,250 +0,0 @@
-# Build performance
-
-When we talk about build performance, it is important to understand that there
-are several build phases:
-
-+ cold build (booting your app up for the first time)
-+ warm build (booting your app up when cache was populated)
-+ rebuild (subsequent rebuilds that happen on file change)
-
-*Cold build* is the slowest because the cache is not yet populated and the
-application is booting for the first time. Build time varies and depends on
-the number of dependencies that application has but ballpark should be around 5
-seconds for small to middle size applications and around 15 seconds for large
-size applications.
-
-*Warm build* is faster then cold one because the cache was populated already
-and it takes less time re-compute dependencies. Build time varies but ballpark
-should be around 2 seconds for small to middle size applications and around 10
-seconds for large size applications.
-
-*Rebuild* aims to be the fastest because it happens the most often. App/
-JavaScript Rebuild time varies but ballpark should be around 200-300ms for
-small to middle size applications and up to 1 second for large size
-applications (200kloc js + 3000 modules).
-
-  * rebuild of JS in app/ <--- Largely our focus, as this is likely the most common.
-  * rebuild of CSS/Sass/Less in app/: largely depends on 3 factors
-    * the size of bower_components (we have plans to largely mitigate this one)
-    * which preprocessor is being used (libsass vs ruby-sass vs less vs ...)
-    * the amount of css
-  * rebuild of vendor/, bower_components/ <--- somewhat costly still, due to
-    how slow available sourceMap Libraries are. We have WIP with a more v8/JIT
-    friendly sourceMap lib, already showing some very nice improvements.
-
-*note* these times are based on a posix box with and SSD, win32 unfortunately
-tends to be slower. As we continue to improve performance, both posix and win32
-improve, hopefully future work will bring these platforms build times closer
-together.
-
-If you see that application timings escape, there might be a problem.
-
-Addons known to cause a slow down (but have not yet been addressed):
-
-* any old non-patch based broccoli plugin
-* ember-cli-component-css
-* ember-browserify
-* ... ?
-
-Make sure to mention which type of the build seems to be the problem so we can
-help identify and fix issues faster.
-
-## FAQ/Common Issues & Solutions:
-
-##### Q
-
-My rebuilds are slow. (And I have anti-virus installed)
-
-##### A
-
-Our build-system assumes a relative fast/performant file system (although, we
-continue to reduce IO related work). It is quite common for a Anti-virus to
-slow down IO.
-
-Common issues:
-
-* anti-virus scanning of <project-root>/tmp/, oftentimes this can be avoided
-  altogether.
-* anti-virus on-file-access re-scanning files, oftentimes this can be disabled
-  for the app directory. or ember can be whitelisted.
-
-##### Q
-
-My rebuilds are slow. (And I am using an encrypted thumb-drive to host my project)
-
-##### A
-
-These sorts of drives are notoriously slow. Although we continue to reduce our
-IO overhead, you will be running at a disadvantage. Oftentimes, a much
-better alternative is hardware supported full-disk encryption, like on most OSX
-corporate laptops (mine included) use. This setup is both reasonably secure,
-and has negligible impact on performance.
-
-##### Q
-
-My JavaScript rebuilds are still slow.
-
-##### A
-
-please run
-
-```
-npm ls broccoli-funnel broccoli-merge-trees broccoli-filter broccoli-persistent-filter broccoli-concat broccoli-caching-writer
-```
-
-and ideally the following should be true (otherwise some upgrades may be required)
-
-* `broccoli-funnel` should be at `^1.0.1`
-* `broccoli-merge-trees` should be at `^1.1.0`
-* `broccoli-persistent-filter` should be at `^1.1.6`
-* `broccoli-filter` often needs to be replaced with
-  `broccoli-persistent-filter` (we hope to re-merge the two eventually)
-* `broccoli-sourcemap-concat` should be at `^2.0.2` but will soon be replace by
-  `broccoli-concat` (we have just re-merged the two)
-* `broccoli-caching-writer` should be at `^2.2.1`
-* `broccoli-concat` should be at `^2.0.3`
-* `broccoli-stew` should be at `^1.2.0`
-* likely more...
-
-Up next we should check for old and deprecate plugins
-
-* `npm ls broccoli-static-compiler` this should no longer be used, rather
-  `broccoli-funnel` at `v1.0.1` should be used
-* ..
-
-##### Q
-
-npm v3 made my build slow
-
-##### A
-
-Well what happened is npm v3 changed the module topology, this coupled with a
-misbehaving plugin may result in extra files (maybe all of node_modules) being
-pulled into the build. This is going to be slow.., the solution is to find the
-offending plugin, and upgrade (or report the issue if it is not yet fixed).
-
-One such plugin is `ember-cli-ic-ajax`, which has been fixed. So please be sure
-to upgrade.
-
-Finding such plugins, we can use a series of DEBUG flags, to gain more insight
-
-`DEBUG=broccoli-funnel:Funnel*Addon* ember s` should reveal if extra files are
-being pulled into the build
-
-##### Q
-
-My builds are slow, and the above Q/A hasn't helped
-
-##### A
-
-Please be sure to read this full document (including the tips and tricks bellow).
-If the issue persists, please report an issue.
-
-Be sure to include:
-
-* `npm version`
-* `npm ls` (as a gist)
-* ideally a reproduction
-  * we are aware some are unable to share apps (even privately), this may prove
-    more difficult to debug. Although in some cases, consulting and proper IP
-    related paperwork to allow sharing could enable improved debugging
-
-
-##### Q
-
-My builds are slow for a reason not mentioned here
-
-##### A
-
-We would love a PR improving this guide.
-
-# Various tips and tricks
-
-# How to explore/debug and hopefully address performance issues
-
-### DEBUG logging
-
-We use [heimdalljs-logger](https://github.com/heimdalljs/heimdalljs-logger) for
-logging, which supports the same usage as the de facto standard
-[debug](https://github.com/visionmedia/debug).  Quite often this can be used to
-quickly discover obviously wrong things.
-
-Usage:
-
-* `DEBUG=<pattern> ember s`
-* `DEBUG=*  ember s` for all logging (this will be very verbose)
-* `DEBUG=ember-cli* ember s` for all ember-cli logging
-* `DEBUG=broccoli* ember s` for all broccoli logging
-* `DEBUG=broccoli*,ember-cli* ember s` for both broccoli and ember-cli logging
-
-The above patterns will be very verbose.  But to make them even more verbose you
-can set the log level via `DEBUG_LEVEL`
-
-* `DEBUG=* DEBUG_LEVEL=debug ember s`
-
-To make them a bit less verbose, a curated set of performance related logging
-flags are:
-
-+ `DEBUG=broccoli-caching-writer:* ember s`
-+ `DEBUG=broccoli-funnel:* ember s`
-+ `DEBUG=broccoli-funnel:Funnel*Addon* ember s`
-+ `DEBUG=broccoli-merge-trees ember s`
-+ `DEBUG=broccoli-merge-trees:TreeMerger* ember s`
-+ `DEBUG=broccoli-merge-trees:Addon* ember s`
-+ `DEBUG=broccoli-merge-trees:styles ember s`
-+ `DEBUG=broccoli-merge-trees:compileTemplates* ember s`
-+ `DEBUG=broccoli-merge-trees:compileTemplates* ember s`
-
-Because many plugins are used repeatedly it may be difficult to see the context
-for log entries.  By default, 3 nodes of context are shown.
-
-```
-DEBUG_LEVEL=debug DEBUG=broccoli-merge-trees: ember build
-broccoli-merge-trees: [TreeMerger (testFiles)#777 -> ConcatWithMaps#782 -> BroccoliMergeTrees#783] deriving patches
-```
-
-To show more (or fewer) lines of context, specify the environment variable
-`DEBUG_DEPTH`.
-
-```
-DEBUG_DEPTH=5 DEBUG_LEVEL=debug DEBUG=broccoli-merge-trees: ember build
-# => broccoli-merge-trees: [TreeMerger (allTrees)#1 -> BroccoliMergeTrees#668 -> TreeMerger (testFiles)#777 -> ConcatWithMaps#782 -> BroccoliMergeTrees#783]
-```
-
-`[... ConcatWithMaps#782 -> BroccoliMergeTrees#783]` means that the log entry
-occurred in broccoli merge-trees node with id 783, whose parent was a concat
-with maps node with id 782.  These ids are shown in the visualization graph.
-See [Visualization](#visualization) for details.
-
-... more on what to look for ...
-
-### `broccoli-viz`
-
-#### Visualization
-
-To visualize build tree, we use [graphviz](http://www.graphviz.org/). To
-install it run `brew install graphviz` or download it directly from
-[here](http://www.graphviz.org/Download.php).
-
-You will also need to install
-[broccoli-viz](https://github.com/stefanpenner/broccoli-viz) version `4.0.0` or
-higher.  `npm install -g broccoli-viz@^4.0.0`.
-
-To generate visualization:
-
-+ `BROCCOLI_VIZ=1 ember build`
-+ `broccoli-viz instrumentation.build.0.json > instrumentation.build.0.dot`
-+ `dot -Tpng instrumentation.build.0.dot > instrumentation.build.0.png`
-
-
-Each build will generate an additional graph, `instrumentation.build.<build-number>.json`
-  
-Alternatively, you can upload the JSON file to https://heimdalljs.github.io/heimdalljs-visualizer/
-
-#### in-depth look
-
-in-depth tooling, aimed to provide much deeper insight into the given build
-
-+ `dot`: is the input to graphviz, allowing tree visualization
-+ `json`: more detailed counts and timings related to the corresponding build
-

package/docs/project_version_preprocessor.js

@@ -1,8 +0,0 @@
-'use strict';
-
-let versionUtils = require('../lib/utilities/version-utils');
-let emberCLIVersion = versionUtils.emberCLIVersion;
-
-module.exports = function (data, options) {
-  options.project.version = emberCLIVersion();
-};

package/docs/sourcemaps.md

@@ -1,60 +0,0 @@
-# Sourcemaps
-
-Today, we expect sourcemaps to work in ember-cli. A default ember-cli
-application should have functioning sourcemaps, with the exception of in-module
-ES6 -> ES5 mappings.  This is for two reasons:
-
-1. dramatically increases build costs
-2. babel (at least at the time) does not correctly mangle names, which results in
-   a very poor debugging experience when some of your variables are debuggable
-   and others are not.  We hope this is eventually rectified.
-
-ember-cli, via ef4/fast-sourcemap-concat, attempts to detect invalid sourcemaps,
-and discards them while still producing a valid, correct but incomplete
-sourcemap.  This means inputs with invalid sourcemaps can still be viewed
-separately in the chrome debugger (as separate "files"), but will have no
-mappings (eg for function names).
-
-If your experience differs from the above, please read the rest of
-this document before logging an issue.
-
-## Debugging Sourcemaps
-
-Sourcemaps can be a bit tricky to read. This is due to them being VLQ encoded,
-and humans not being very good at decoding VLQ on the fly.
-
-There are broadly two ways a source file will have sourcemaps attached.
-
-1. Via an external map file
-2. Inline, in Base64.
-
-External sourcemap files can be read with the [helper tools at
-fast-source-map](https://github.com/krisselden/fast-source-map/tree/master/bin).
-
-Inline sourcemaps will look something like
-
-```
-//# sourceMappingURL=data:application/json;base64,eyJ2ZXJzaW9uIjozLCJzb3VyY2VzIjpbImlubmVyL2ZpcnN0LmpzIiwiaW5uZXIvc2Vjb25kLmpzIl0sInNvdXJjZXNDb250ZW50IjpbImZ1bmN0aW9uIG1lYW5pbmdPZkxpZmUoKSB7XG4gIHRocm93IG5ldyBFcnJvcig0Mik7XG59XG5cbmZ1bmN0aW9uIGJvb20oKSB7XG4gIHRocm93IG5ldyBFcnJvcignYm9vbScpO1xufVxuIiwiZnVuY3Rpb24gc29tZXRoaW5nRWxzZSgpIHtcbiAgdGhyb3cgbmV3IEVycm9yKFwic29tZXRoaWduIGVsc2VcIik7XG59XG4iXSwibmFtZXMiOltdLCJtYXBwaW5ncyI6IkFBQUE7QUFDQTtBQUNBO0FBQ0E7QUFDQTtBQUNBO0FBQ0E7O0FDTkE7QUFDQTtBQUNBOyIsImZpbGUiOiJhbGwtaW5uZXIuanMifQ==
-```
-
-
-The easiest way to read them is to first convert them to an external map file.
-To do so:
-
-1. take the part after `base64,` and in node `new Buffer(string,
-   'base64').toString();`
-2. write this to a file, and one can now use the above described fast sourcemap
-   helpers
-
-### Handling Invalid Sourcemaps
-
-Add `DEBUG='fast-sourcemap-concat:*'` to see error output when invalid
-sourcemaps are detected.
-
-## Useful tools
-
-- source map visualizer - https://sokra.github.io/source-map-visualization/ **
-  Very useful, but appears to have issues with both large sourcemaps, and
-  incorrect sourcemaps (such as ones with unexpected negative offsets).
-- encode/decode - https://github.com/krisselden/fast-source-map/tree/master/bin
-- srcmap r3 - `https://docs.google.com/document/d/1U1RGAehQwRypUTovF1KRlpiOFze0b-_2gc6fAH0KY0k/edit`

package/docs/yuidoc.json

@@ -1,13 +0,0 @@
-{
-  "logo": "https://ember-cli.com/assets/images/ember-cli-logo-small-dark.png",
-  "options": {
-    "paths": [
-      "lib"
-    ],
-    "themedir": "node_modules/yuidoc-ember-cli-theme",
-    "helpers": ["node_modules/yuidoc-ember-cli-theme/helpers.js"],
-    "outdir":   "docs/build",
-    "preprocessor": "docs/project_version_preprocessor.js",
-    "linkNatives": true
-  }
-}