electrobun 0.0.1 → 0.0.3

package/src/bsdiff/zstd/zlibWrapper/examples/example_original.c

@@ -1,599 +0,0 @@
-/* example.c -- usage example of the zlib compression library
- */
-/*
- Copyright (c) 1995-2006, 2011 Jean-loup Gailly
-
-This software is provided 'as-is', without any express or implied
-warranty. In no event will the authors be held liable for any damages
-arising from the use of this software.
-
-Permission is granted to anyone to use this software for any purpose,
-including commercial applications, and to alter it and redistribute it
-freely, subject to the following restrictions:
-
-1. The origin of this software must not be misrepresented; you must not
-   claim that you wrote the original software. If you use this software
-   in a product, an acknowledgement in the product documentation would be
-   appreciated but is not required.
-2. Altered source versions must be plainly marked as such, and must not be
-   misrepresented as being the original software.
-3. This notice may not be removed or altered from any source distribution.
-*/
-
-/* @(#) $Id$ */
-
-#include "zlib.h"
-#include <stdio.h>
-
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-
-#if defined(VMS) || defined(RISCOS)
-#  define TESTFILE "foo-gz"
-#else
-#  define TESTFILE "foo.gz"
-#endif
-
-#define CHECK_ERR(err, msg) { \
-    if (err != Z_OK) { \
-        fprintf(stderr, "%s error: %d\n", msg, err); \
-        exit(1); \
-    } \
-}
-
-z_const char hello[] = "hello, hello!";
-/* "hello world" would be more standard, but the repeated "hello"
- * stresses the compression code better, sorry...
- */
-
-const char dictionary[] = "hello";
-uLong dictId; /* Adler32 value of the dictionary */
-
-void test_deflate       _Z_OF((Byte *compr, uLong comprLen));
-void test_inflate       _Z_OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_large_deflate _Z_OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_large_inflate _Z_OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_flush         _Z_OF((Byte *compr, uLong *comprLen));
-void test_sync          _Z_OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_dict_deflate  _Z_OF((Byte *compr, uLong comprLen));
-void test_dict_inflate  _Z_OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-int  main               _Z_OF((int argc, char *argv[]));
-
-
-#ifdef Z_SOLO
-
-void *myalloc _Z_OF((void *, unsigned, unsigned));
-void myfree _Z_OF((void *, void *));
-
-void *myalloc(q, n, m)
-    void *q;
-    unsigned n, m;
-{
-    q = Z_NULL;
-    return calloc(n, m);
-}
-
-void myfree(void *q, void *p)
-{
-    q = Z_NULL;
-    free(p);
-}
-
-static alloc_func zalloc = myalloc;
-static free_func zfree = myfree;
-
-#else /* !Z_SOLO */
-
-static alloc_func zalloc = (alloc_func)0;
-static free_func zfree = (free_func)0;
-
-void test_compress      _Z_OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_gzio          _Z_OF((const char *fname,
-                            Byte *uncompr, uLong uncomprLen));
-
-/* ===========================================================================
- * Test compress() and uncompress()
- */
-void test_compress(Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)
-{
-    int err;
-    uLong len = (uLong)strlen(hello)+1;
-
-    err = compress(compr, &comprLen, (const Bytef*)hello, len);
-    CHECK_ERR(err, "compress");
-
-    strcpy((char*)uncompr, "garbage");
-
-    err = uncompress(uncompr, &uncomprLen, compr, comprLen);
-    CHECK_ERR(err, "uncompress");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad uncompress\n");
-        exit(1);
-    } else {
-        printf("uncompress(): %s\n", (char *)uncompr);
-    }
-}
-
-/* ===========================================================================
- * Test read/write of .gz files
- */
-void test_gzio(const char *fname /* compressed file name */, Byte *uncompr,
-    uLong uncomprLen)
-{
-#ifdef NO_GZCOMPRESS
-    fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n");
-#else
-    int err;
-    int len = (int)strlen(hello)+1;
-    gzFile file;
-    z_off_t pos;
-
-    file = gzopen(fname, "wb");
-    if (file == NULL) {
-        fprintf(stderr, "gzopen error\n");
-        exit(1);
-    }
-    gzputc(file, 'h');
-    if (gzputs(file, "ello") != 4) {
-        fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    if (gzprintf(file, ", %s!", "hello") != 8) {
-        fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
-    gzclose(file);
-
-    file = gzopen(fname, "rb");
-    if (file == NULL) {
-        fprintf(stderr, "gzopen error\n");
-        exit(1);
-    }
-    strcpy((char*)uncompr, "garbage");
-
-    if (gzread(file, uncompr, (unsigned)uncomprLen) != len) {
-        fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
-        exit(1);
-    } else {
-        printf("gzread(): %s\n", (char*)uncompr);
-    }
-
-    pos = gzseek(file, -8L, SEEK_CUR);
-    if (pos != 6 || gztell(file) != pos) {
-        fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
-                (long)pos, (long)gztell(file));
-        exit(1);
-    }
-
-    if (gzgetc(file) != ' ') {
-        fprintf(stderr, "gzgetc error\n");
-        exit(1);
-    }
-
-    if (gzungetc(' ', file) != ' ') {
-        fprintf(stderr, "gzungetc error\n");
-        exit(1);
-    }
-
-    gzgets(file, (char*)uncompr, (int)uncomprLen);
-    if (strlen((char*)uncompr) != 7) { /* " hello!" */
-        fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    if (strcmp((char*)uncompr, hello + 6)) {
-        fprintf(stderr, "bad gzgets after gzseek\n");
-        exit(1);
-    } else {
-        printf("gzgets() after gzseek: %s\n", (char*)uncompr);
-    }
-
-    gzclose(file);
-#endif
-}
-
-#endif /* Z_SOLO */
-
-/* ===========================================================================
- * Test deflate() with small buffers
- */
-void test_deflate(Byte *compr, uLong comprLen)
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-    uLong len = (uLong)strlen(hello)+1;
-
-    c_stream.zalloc = zalloc;
-    c_stream.zfree = zfree;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_in  = (z_const unsigned char *)hello;
-    c_stream.next_out = compr;
-
-    while (c_stream.total_in != len && c_stream.total_out < comprLen) {
-        c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
-        err = deflate(&c_stream, Z_NO_FLUSH);
-        CHECK_ERR(err, "deflate");
-    }
-    /* Finish the stream, still forcing small buffers: */
-    for (;;) {
-        c_stream.avail_out = 1;
-        err = deflate(&c_stream, Z_FINISH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "deflate");
-    }
-
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with small buffers
- */
-void test_inflate(Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = zalloc;
-    d_stream.zfree = zfree;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = 0;
-    d_stream.next_out = uncompr;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
-        d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "inflate");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad inflate\n");
-        exit(1);
-    } else {
-        printf("inflate(): %s\n", (char *)uncompr);
-    }
-}
-
-/* ===========================================================================
- * Test deflate() with large buffers and dynamic change of compression level
- */
-void test_large_deflate(Byte *compr, uLong comprLen, Byte *uncompr,
-    uLong uncomprLen)
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-
-    c_stream.zalloc = zalloc;
-    c_stream.zfree = zfree;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_BEST_SPEED);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_out = compr;
-    c_stream.avail_out = (uInt)comprLen;
-
-    /* At this point, uncompr is still mostly zeroes, so it should compress
-     * very well:
-     */
-    c_stream.next_in = uncompr;
-    c_stream.avail_in = (uInt)uncomprLen;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-    if (c_stream.avail_in != 0) {
-        fprintf(stderr, "deflate not greedy\n");
-        exit(1);
-    }
-
-    /* Feed in already compressed data and switch to no compression: */
-    deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
-    c_stream.next_in = compr;
-    c_stream.avail_in = (uInt)comprLen/2;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    /* Switch back to compressing mode: */
-    deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
-    c_stream.next_in = uncompr;
-    c_stream.avail_in = (uInt)uncomprLen;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        fprintf(stderr, "deflate should report Z_STREAM_END\n");
-        exit(1);
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with large buffers
- */
-void test_large_inflate(Byte *compr, uLong comprLen, Byte *uncompr,
-    uLong uncomprLen)
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = zalloc;
-    d_stream.zfree = zfree;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = (uInt)comprLen;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    for (;;) {
-        d_stream.next_out = uncompr;            /* discard the output */
-        d_stream.avail_out = (uInt)uncomprLen;
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "large inflate");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
-        fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
-        exit(1);
-    } else {
-        printf("large_inflate(): OK\n");
-    }
-}
-
-/* ===========================================================================
- * Test deflate() with full flush
- */
-void test_flush(Byte *compr, uLong comprLen)
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-    uInt len = (uInt)strlen(hello)+1;
-
-    c_stream.zalloc = zalloc;
-    c_stream.zfree = zfree;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_in  = (z_const unsigned char *)hello;
-    c_stream.next_out = compr;
-    c_stream.avail_in = 3;
-    c_stream.avail_out = (uInt)*comprLen;
-    err = deflate(&c_stream, Z_FULL_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    compr[3]++; /* force an error in first compressed block */
-    c_stream.avail_in = len - 3;
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        CHECK_ERR(err, "deflate");
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-
-    *comprLen = c_stream.total_out;
-}
-
-/* ===========================================================================
- * Test inflateSync()
- */
-void test_sync(Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = zalloc;
-    d_stream.zfree = zfree;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = 2; /* just read the zlib header */
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    d_stream.next_out = uncompr;
-    d_stream.avail_out = (uInt)uncomprLen;
-
-    inflate(&d_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "inflate");
-
-    d_stream.avail_in = (uInt)comprLen-2;   /* read all compressed data */
-    err = inflateSync(&d_stream);           /* but skip the damaged part */
-    CHECK_ERR(err, "inflateSync");
-
-    err = inflate(&d_stream, Z_FINISH);
-    if (err != Z_DATA_ERROR) {
-        fprintf(stderr, "inflate should report DATA_ERROR\n");
-        /* Because of incorrect adler32 */
-        exit(1);
-    }
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    printf("after inflateSync(): hel%s\n", (char *)uncompr);
-}
-
-/* ===========================================================================
- * Test deflate() with preset dictionary
- */
-void test_dict_deflate(Byte *compr, uLong comprLen)
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-
-    c_stream.zalloc = zalloc;
-    c_stream.zfree = zfree;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    err = deflateSetDictionary(&c_stream,
-                (const Bytef*)dictionary, (int)sizeof(dictionary));
-    CHECK_ERR(err, "deflateSetDictionary");
-
-    dictId = c_stream.adler;
-    c_stream.next_out = compr;
-    c_stream.avail_out = (uInt)comprLen;
-
-    c_stream.next_in = (z_const unsigned char *)hello;
-    c_stream.avail_in = (uInt)strlen(hello)+1;
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        fprintf(stderr, "deflate should report Z_STREAM_END\n");
-        exit(1);
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with a preset dictionary
- */
-void test_dict_inflate(Byte *compr, uLong comprLen, Byte *uncompr,
-    uLong uncomprLen)
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = zalloc;
-    d_stream.zfree = zfree;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = (uInt)comprLen;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    d_stream.next_out = uncompr;
-    d_stream.avail_out = (uInt)uncomprLen;
-
-    for (;;) {
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        if (err == Z_NEED_DICT) {
-            if (d_stream.adler != dictId) {
-                fprintf(stderr, "unexpected dictionary");
-                exit(1);
-            }
-            err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
-                                       (int)sizeof(dictionary));
-        }
-        CHECK_ERR(err, "inflate with dict");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad inflate with dict\n");
-        exit(1);
-    } else {
-        printf("inflate with dictionary: %s\n", (char *)uncompr);
-    }
-}
-
-/* ===========================================================================
- * Usage:  example [output.gz  [input.gz]]
- */
-
-int main(int argc, char *argv[])
-{
-    Byte *compr, *uncompr;
-    uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
-    uLong uncomprLen = comprLen;
-    static const char* myVersion = ZLIB_VERSION;
-
-    if (zlibVersion()[0] != myVersion[0]) {
-        fprintf(stderr, "incompatible zlib version\n");
-        exit(1);
-
-    } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
-        fprintf(stderr, "warning: different zlib version\n");
-    }
-
-    printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n",
-            ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags());
-
-    compr    = (Byte*)calloc((uInt)comprLen, 1);
-    uncompr  = (Byte*)calloc((uInt)uncomprLen, 1);
-    /* compr and uncompr are cleared to avoid reading uninitialized
-     * data and to ensure that uncompr compresses well.
-     */
-    if (compr == Z_NULL || uncompr == Z_NULL) {
-        printf("out of memory\n");
-        exit(1);
-    }
-
-#ifdef Z_SOLO
-    argc = strlen(argv[0]);
-#else
-    test_compress(compr, comprLen, uncompr, uncomprLen);
-
-    test_gzio((argc > 1 ? argv[1] : TESTFILE),
-              uncompr, uncomprLen);
-#endif
-
-    test_deflate(compr, comprLen);
-    test_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    test_large_deflate(compr, comprLen, uncompr, uncomprLen);
-    test_large_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    test_flush(compr, &comprLen);
-    test_sync(compr, comprLen, uncompr, uncomprLen);
-    comprLen = uncomprLen;
-
-    test_dict_deflate(compr, comprLen);
-    test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    free(compr);
-    free(uncompr);
-
-    return 0;
-}