effect 4.0.5 → 4.0.7

package/dist/encoding/Zip.d.ts

@@ -0,0 +1,413 @@
+/**
+ * Encodes and decodes zip archives as streams in Effect channels.
+ *
+ * `encode` writes each entry as it arrives and adds the central directory once
+ * the input ends; `decode` reads entries in archive order from their local
+ * headers. `decode` never buffers an entire entry body, and `encode` only
+ * collects deflated bodies with a `size` of at most 64 KiB.
+ *
+ * Entries are stored or compressed with deflate, the methods every zip tool
+ * reads. Compression uses the runtime's `CompressionStream("deflate-raw")`;
+ * decompression is implemented here, so that `decode` can find the end of
+ * entries whose sizes follow their data. ZIP64 fields are written when sizes,
+ * offsets or the entry count need them, and read from local headers and data
+ * descriptors.
+ * Encryption, other compression methods and archives split across files are
+ * not supported.
+ *
+ * This module is experimental and may receive breaking changes in patch
+ * releases.
+ *
+ * @stability experimental
+ * @since 4.0.6
+ */
+import * as Arr from "../Array.ts";
+import * as Cause from "../Cause.ts";
+import * as Channel from "../Channel.ts";
+import * as Stream from "../Stream.ts";
+declare const ZipErrorTypeId = "~effect/encoding/Zip/ZipError";
+declare const ZipError_base: new <A extends Record<string, any> = {}>(args: import("../Types.ts").VoidIfEmpty<{ readonly [P in keyof A as P extends "_tag" ? never : P]: A[P]; }>) => Cause.YieldableError & {
+    readonly _tag: "ZipError";
+} & Readonly<A>;
+/**
+ * Error raised when a zip archive cannot be encoded or decoded.
+ *
+ * **Details**
+ *
+ * The `kind` field identifies the failure:
+ *
+ * - `InvalidHeader`: a header has an unknown signature or a malformed field, or
+ *   an entry has a value that cannot be written.
+ * - `InvalidData`: the compressed data of an entry is corrupt.
+ * - `Truncated`: the input ended inside an entry or before the central
+ *   directory.
+ * - `Checksum`: the data of an entry does not match its CRC-32.
+ * - `SizeMismatch`: an entry body produced a byte count other than its declared
+ *   `size`, or the data of an entry does not match the sizes in the archive.
+ * - `Unsupported`: the archive uses a feature this module does not read, such
+ *   as encryption or a compression method other than store and deflate.
+ * - `BodyConsumed`: an entry body was read after the decoder had moved past it.
+ *
+ * @stability experimental
+ * @category errors
+ * @since 4.0.6
+ */
+export declare class ZipError extends ZipError_base<{
+    readonly kind: "InvalidHeader" | "InvalidData" | "Truncated" | "Checksum" | "SizeMismatch" | "Unsupported" | "BodyConsumed";
+    readonly message: string;
+}> {
+    /**
+     * Marks this value as a zip error for runtime guards.
+     *
+     * @stability experimental
+     * @since 4.0.6
+     */
+    readonly [ZipErrorTypeId] = "~effect/encoding/Zip/ZipError";
+}
+/**
+ * Checks whether a value is a `ZipError`.
+ *
+ * @stability experimental
+ * @category guards
+ * @since 4.0.6
+ */
+export declare const isZipError: (u: unknown) => u is ZipError;
+/**
+ * Kind of object described by a zip entry.
+ *
+ * @stability experimental
+ * @category models
+ * @since 4.0.6
+ */
+export type EntryType = "File" | "Directory";
+/**
+ * Compression method of a zip entry.
+ *
+ * @stability experimental
+ * @category models
+ * @since 4.0.6
+ */
+export type Method = "Store" | "Deflate";
+/**
+ * Metadata of a zip entry.
+ *
+ * **Details**
+ *
+ * `path` is the archive path, with `/` separators; directory paths end with
+ * `/`. `size` is the uncompressed byte length when it is known before the body:
+ * decoded entries whose sizes follow their data have no `size`. `mode` holds
+ * Unix permission bits and is written to the central directory, which `decode`
+ * does not read, so decoded headers have no `mode`. `mtime` has a resolution of
+ * one second when the archive has an extended timestamp and two seconds
+ * otherwise.
+ *
+ * @stability experimental
+ * @category models
+ * @since 4.0.6
+ */
+export interface Header {
+    readonly path: string;
+    readonly type: EntryType;
+    readonly method: Method;
+    readonly mtime: Date;
+    readonly size?: number | undefined;
+    readonly mode?: number | undefined;
+}
+/**
+ * Zip entry: a header and a stream of the uncompressed body bytes.
+ *
+ * **Details**
+ *
+ * `decode` returns these, and `fileStream` builds them. `encode` writes the
+ * sizes and CRC-32 of a streamed body in a data descriptor after the data.
+ *
+ * @see {@link ContentEntry} for entries whose content is held in memory
+ *
+ * @stability experimental
+ * @category models
+ * @since 4.0.6
+ */
+export interface Entry<E = never, R = never> {
+    readonly header: Header;
+    readonly body: Stream.Stream<Uint8Array, E, R>;
+    readonly content?: undefined;
+}
+/**
+ * Zip entry whose uncompressed content is held in memory.
+ *
+ * **Details**
+ *
+ * `file` and `directory` build these. Because the content is known before the
+ * entry is written, `encode` puts its sizes and CRC-32 in the local header and
+ * writes no data descriptor, which every zip reader accepts. `content` and
+ * `body` exclude each other, so an entry whose body is replaced must drop
+ * `content`.
+ *
+ * @see {@link Entry} for entries whose content is streamed
+ *
+ * @stability experimental
+ * @category models
+ * @since 4.0.6
+ */
+export interface ContentEntry {
+    readonly header: Header;
+    readonly content: Uint8Array;
+    readonly body?: undefined;
+}
+/**
+ * Options for the entry constructors.
+ *
+ * **Details**
+ *
+ * Unset fields default to an mtime of 1980-01-01T00:00:00Z, the earliest time
+ * a zip header can hold, and mode `0o644` (`0o755` for directories). The
+ * defaults make archives reproducible.
+ *
+ * @stability experimental
+ * @category models
+ * @since 4.0.6
+ */
+export interface EntryOptions {
+    readonly mtime?: Date | undefined;
+    readonly mode?: number | undefined;
+}
+/**
+ * Options for file entries.
+ *
+ * **Details**
+ *
+ * `method` defaults to `"Deflate"`. Use `"Store"` for content that is already
+ * compressed, such as images or archives.
+ *
+ * @stability experimental
+ * @category models
+ * @since 4.0.6
+ */
+export interface FileOptions extends EntryOptions {
+    readonly method?: Method | undefined;
+}
+/**
+ * Options for file entries whose content is streamed.
+ *
+ * **Details**
+ *
+ * `size` is the exact byte length of the body. It is required for `Store`,
+ * because streaming readers can only find the end of stored data from its
+ * size, and optional for `Deflate`, where it is checked against the body.
+ *
+ * @stability experimental
+ * @category models
+ * @since 4.0.6
+ */
+export type FileStreamOptions = EntryOptions & ({
+    readonly method?: "Deflate" | undefined;
+    readonly size?: number | undefined;
+} | {
+    readonly method: "Store";
+    readonly size: number;
+});
+/**
+ * Creates a file entry from in-memory content.
+ *
+ * **Details**
+ *
+ * String content is encoded as UTF-8, and `size` is the byte length of the
+ * content. Because the content is known up front, its sizes and CRC-32 are
+ * written in the local header, which every zip reader accepts.
+ *
+ * @see {@link fileStream} for content that is streamed instead of held in memory
+ * @see {@link encode} for writing entries to an archive
+ *
+ * @stability experimental
+ * @category constructors
+ * @since 4.0.6
+ */
+export declare const file: (path: string, content: string | Uint8Array, options?: FileOptions) => ContentEntry;
+/**
+ * Creates a file entry whose content is streamed from `body`.
+ *
+ * **When to use**
+ *
+ * Use when the content is too large to hold in memory, or is read from a file
+ * or another stream.
+ *
+ * **Details**
+ *
+ * `body` is not run until the entry is encoded. Its sizes and CRC-32 are
+ * written in a data descriptor after the data.
+ *
+ * **Gotchas**
+ *
+ * - A stored entry without `size` fails with an `InvalidHeader` `ZipError`.
+ * - When `size` is set, `encode` fails with a `SizeMismatch` `ZipError` if the
+ *   body produces fewer or more bytes.
+ * - Non-empty stored entries are followed by a data descriptor, which some
+ *   streaming readers mishandle. Java's `ZipInputStream` rejects them, and
+ *   libarchive reading from a pipe (as `bsdtar` does) ends them at the first
+ *   bytes that look like a descriptor, so content can cut the entry short and
+ *   add entries. Use `Deflate` or an in-memory `file` for untrusted content
+ *   and for those readers.
+ *
+ * @see {@link file} for in-memory content
+ * @see {@link encode} for writing entries to an archive
+ *
+ * @stability experimental
+ * @category constructors
+ * @since 4.0.6
+ */
+export declare const fileStream: <E = never, R = never>(path: string, body: Stream.Stream<Uint8Array, E, R>, options?: FileStreamOptions) => Entry<E, R>;
+/**
+ * Creates a directory entry.
+ *
+ * **Details**
+ *
+ * A trailing `/` is added to a non-empty `path` when missing, as zip tools
+ * expect for directories.
+ *
+ * @stability experimental
+ * @category constructors
+ * @since 4.0.6
+ */
+export declare const directory: (path: string, options?: EntryOptions) => ContentEntry;
+/**
+ * Creates a channel that decodes zip archive bytes into entries.
+ *
+ * **Details**
+ *
+ * Entries are read in archive order from their local headers, so archives can
+ * be decoded as they arrive, for example from an HTTP response. Each output
+ * chunk holds one entry, and each body streams the uncompressed bytes of the
+ * entry. Pulling the next entry skips whatever is left of the current body.
+ * Stored and deflated entries are read, including ZIP64 sizes and deflated
+ * entries whose sizes follow their data in a data descriptor. Every body is
+ * checked against its CRC-32 and sizes. Reading stops at the central directory.
+ *
+ * Paths use the UTF-8 flag when set, and otherwise the first Info-ZIP Unicode
+ * path field when it matches the name, as Info-ZIP and 7-Zip do; other paths
+ * are read as UTF-8 when valid and as CP437 otherwise. Times are read from the
+ * extended timestamp field when present, and otherwise from the DOS time and
+ * date, which have no time zone and are read as UTC.
+ *
+ * **Gotchas**
+ *
+ * - Read each body before pulling the next entry: a body read afterwards fails
+ *   with a `BodyConsumed` `ZipError`. Operators that pull ahead, such as
+ *   `Stream.buffer`, therefore can't sit between `decode` and the body reads.
+ * - Read bodies while the entry stream runs, for example in `Stream.mapEffect`:
+ *   once it has ended, as after `Stream.runCollect`, `Stream.runHead` or
+ *   `Stream.take`, every body fails with a `BodyConsumed` `ZipError`.
+ * - A body reads the entry's bytes once: running it again continues where the
+ *   previous run stopped.
+ * - The central directory is not read, so `mode`, comments and entries that
+ *   only the central directory lists are not reported. Tools that read the
+ *   central directory can see other entries and paths, for example in
+ *   archives updated by appending.
+ * - Archives that do not start with an entry or a central directory, such as
+ *   self-extracting archives, fail with an `InvalidHeader` `ZipError`.
+ * - Stored entries whose sizes only follow their data fail with an
+ *   `Unsupported` `ZipError`. Python's `zipfile` writes them for stored
+ *   entries on unseekable output, and Info-ZIP's `zip` for empty files when
+ *   writing to a pipe. Searching for their end would let the content of an
+ *   entry forge the entries after it.
+ * - A body that grows past its `size` fails with a `SizeMismatch` `ZipError`
+ *   before the extra bytes are emitted, so `size` can be checked before reading.
+ * - Deflated data can expand about a thousand times, and pulling the next
+ *   entry inflates the rest of the current body to find its end. To bound the
+ *   work on untrusted archives, check `size`, count the bytes of bodies
+ *   without one, and end the stream at an entry that is too large rather than
+ *   skip it.
+ * - Every `ZipError` ends the archive: later entry and body reads fail with
+ *   the same error.
+ * - The channel completes only when its input ends: input after the central
+ *   directory is read and discarded, so that the upstream done value can be
+ *   passed on.
+ * - Paths are returned as written in the archive: they can be absolute,
+ *   contain `..`, drive letters, control characters or backslashes, which some
+ *   tools read as separators, and can repeat. Validate them before writing
+ *   entries to disk; `encode` rejects absolute paths, drive letters and
+ *   backslashes. Paths with a NUL character, which other tools take as the end
+ *   of the name, fail with an `InvalidHeader` `ZipError`.
+ *
+ * @see {@link encode} for the inverse operation
+ *
+ * @stability experimental
+ * @category decoding
+ * @since 4.0.6
+ */
+export declare const decode: <IE = never, Done = unknown>() => Channel.Channel<Arr.NonEmptyReadonlyArray<Entry<ZipError | IE>>, ZipError | IE, Done, Arr.NonEmptyReadonlyArray<Uint8Array>, IE, Done>;
+/**
+ * Creates a channel that encodes entries into zip archive bytes.
+ *
+ * **Details**
+ *
+ * Each entry is written as soon as it arrives: a local header, the stored or
+ * deflated body and, for entries with a streamed `body`, a data descriptor
+ * with the CRC-32 and sizes. A `ContentEntry` has them in its local header.
+ * The central directory is written once the input ends. Paths are written as
+ * UTF-8, with the UTF-8 flag set when they are not ASCII. `mtime`
+ * is written both as a DOS time in UTC, which keeps two-second resolution and
+ * covers 1980 to 2107, and as an extended timestamp in whole seconds when it
+ * falls between 1970 and 2038. ZIP64 fields are added when a size, an offset
+ * or the entry count does not fit the classic fields, and to the local header
+ * of a deflated entry streamed without a `size` or with one near 4 GiB, so
+ * that readers know the width of the sizes after its data.
+ *
+ * Headers and body chunks below 16 KiB are gathered into output chunks of
+ * about 64 KiB, and larger body chunks pass through without copying. Output is
+ * handed out before waiting for more entries, but up to 64 KiB of it can be
+ * held while a body is pulled. Each body chunk of a streamed `Deflate` entry is
+ * a separate compressor job, so larger chunks compress faster. A `Deflate`
+ * body with a `size` of at most 64 KiB is instead collected and compressed in
+ * one job, and still gets a data descriptor; omit `size` to stream it.
+ *
+ * **Gotchas**
+ *
+ * - Deflated entries need `CompressionStream("deflate-raw")`. On a runtime
+ *   without it, encoding a deflated entry dies with the runtime's error, as
+ *   it does when the compressor fails: check for the API or use `Store`.
+ * - Deflated bytes come from the runtime's `CompressionStream`, so they can
+ *   differ between runtimes. Archives of stored entries are byte-identical
+ *   everywhere.
+ * - A body that produces a byte count other than a set `header.size`, or any
+ *   bytes for a directory, fails with a `SizeMismatch` `ZipError`.
+ * - Directories are always stored, whatever their `method`.
+ * - Empty paths, paths starting with `/` or a drive letter such as `C:`, paths
+ *   containing `\` or NUL, `File` paths ending with `/`, `Directory` paths not
+ *   ending with `/`, and invalid modes, sizes or times fail with an
+ *   `InvalidHeader` `ZipError`. Other paths are written as given, including
+ *   `..` segments, so validate untrusted paths before encoding them.
+ *
+ * **Example** (Writing and reading an archive)
+ *
+ * ```ts import.meta.vitest
+ * import { Effect, Stream } from "effect"
+ * import { Zip } from "effect/encoding"
+ *
+ * const archive = Stream.make(
+ *   Zip.directory("docs"),
+ *   Zip.file("docs/readme.txt", "Hello, zip!")
+ * ).pipe(Stream.pipeThroughChannel(Zip.encode()))
+ *
+ * const listing = archive.pipe(
+ *   Stream.pipeThroughChannel(Zip.decode()),
+ *   Stream.mapEffect((entry) =>
+ *     Stream.mkString(Stream.decodeText(entry.body)).pipe(
+ *       Effect.map((text) => `${entry.header.path} ${JSON.stringify(text)}`)
+ *     )
+ *   ),
+ *   Stream.runCollect
+ * )
+ * await Effect.runPromise(listing) // => ['docs/ ""', 'docs/readme.txt "Hello, zip!"']
+ * ```
+ *
+ * @see {@link decode} for the inverse operation
+ * @see {@link file} for building entries from in-memory content
+ * @see {@link fileStream} for building entries from streamed content
+ *
+ * @stability experimental
+ * @category encoding
+ * @since 4.0.6
+ */
+export declare const encode: <IE = never, Done = unknown, In extends Entry<any, any> | ContentEntry = Entry | ContentEntry>() => Channel.Channel<Arr.NonEmptyReadonlyArray<Uint8Array>, ZipError | IE | (In extends Entry<infer E, any> ? E : never), Done, Arr.NonEmptyReadonlyArray<In>, IE, Done, In extends Entry<any, infer R> ? R : never>;
+export {};
+//# sourceMappingURL=Zip.d.ts.map

package/dist/encoding/Zip.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"Zip.d.ts","sourceRoot":"","sources":["../../src/encoding/Zip.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;GAsBG;AACH,OAAO,KAAK,GAAG,MAAM,aAAa,CAAA;AAClC,OAAO,KAAK,KAAK,MAAM,aAAa,CAAA;AACpC,OAAO,KAAK,OAAO,MAAM,eAAe,CAAA;AASxC,OAAO,KAAK,MAAM,MAAM,cAAc,CAAA;AAEtC,QAAA,MAAM,cAAc,kCAAkC,CAAA;;;;AAEtD;;;;;;;;;;;;;;;;;;;;;;GAsBG;AACH,qBAAa,QAAS,SAAQ,cAA6B;IACzD,QAAQ,CAAC,IAAI,EACT,eAAe,GACf,aAAa,GACb,WAAW,GACX,UAAU,GACV,cAAc,GACd,aAAa,GACb,cAAc,CAAA;IAClB,QAAQ,CAAC,OAAO,EAAE,MAAM,CAAA;CACzB,CAAC;IACA;;;;;OAKG;IACH,QAAQ,CAAC,CAAC,cAAc,CAAC,mCAAiB;CAC3C;AAED;;;;;;GAMG;AACH,eAAO,MAAM,UAAU,MAAO,OAAO,KAAG,CAAC,IAAI,QAAoD,CAAA;AAEjG;;;;;;GAMG;AACH,MAAM,MAAM,SAAS,GAAG,MAAM,GAAG,WAAW,CAAA;AAE5C;;;;;;GAMG;AACH,MAAM,MAAM,MAAM,GAAG,OAAO,GAAG,SAAS,CAAA;AAExC;;;;;;;;;;;;;;;;GAgBG;AACH,MAAM,WAAW,MAAM;IACrB,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAA;IACrB,QAAQ,CAAC,IAAI,EAAE,SAAS,CAAA;IACxB,QAAQ,CAAC,MAAM,EAAE,MAAM,CAAA;IACvB,QAAQ,CAAC,KAAK,EAAE,IAAI,CAAA;IACpB,QAAQ,CAAC,IAAI,CAAC,EAAE,MAAM,GAAG,SAAS,CAAA;IAClC,QAAQ,CAAC,IAAI,CAAC,EAAE,MAAM,GAAG,SAAS,CAAA;CACnC;AAED;;;;;;;;;;;;;GAaG;AACH,MAAM,WAAW,KAAK,CAAC,CAAC,GAAG,KAAK,EAAE,CAAC,GAAG,KAAK;IACzC,QAAQ,CAAC,MAAM,EAAE,MAAM,CAAA;IACvB,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAC,MAAM,CAAC,UAAU,EAAE,CAAC,EAAE,CAAC,CAAC,CAAA;IAC9C,QAAQ,CAAC,OAAO,CAAC,EAAE,SAAS,CAAA;CAC7B;AAED;;;;;;;;;;;;;;;;GAgBG;AACH,MAAM,WAAW,YAAY;IAC3B,QAAQ,CAAC,MAAM,EAAE,MAAM,CAAA;IACvB,QAAQ,CAAC,OAAO,EAAE,UAAU,CAAA;IAC5B,QAAQ,CAAC,IAAI,CAAC,EAAE,SAAS,CAAA;CAC1B;AAED;;;;;;;;;;;;GAYG;AACH,MAAM,WAAW,YAAY;IAC3B,QAAQ,CAAC,KAAK,CAAC,EAAE,IAAI,GAAG,SAAS,CAAA;IACjC,QAAQ,CAAC,IAAI,CAAC,EAAE,MAAM,GAAG,SAAS,CAAA;CACnC;AAED;;;;;;;;;;;GAWG;AACH,MAAM,WAAW,WAAY,SAAQ,YAAY;IAC/C,QAAQ,CAAC,MAAM,CAAC,EAAE,MAAM,GAAG,SAAS,CAAA;CACrC;AAED;;;;;;;;;;;;GAYG;AACH,MAAM,MAAM,iBAAiB,GACzB,YAAY,GACZ,CACE;IAAE,QAAQ,CAAC,MAAM,CAAC,EAAE,SAAS,GAAG,SAAS,CAAC;IAAC,QAAQ,CAAC,IAAI,CAAC,EAAE,MAAM,GAAG,SAAS,CAAA;CAAE,GAC/E;IAAE,QAAQ,CAAC,MAAM,EAAE,OAAO,CAAC;IAAC,QAAQ,CAAC,IAAI,EAAE,MAAM,CAAA;CAAE,CACtD,CAAA;AAmBH;;;;;;;;;;;;;;;GAeG;AACH,eAAO,MAAM,IAAI,SAAU,MAAM,WAAW,MAAM,GAAG,UAAU,YAAY,WAAW,KAAG,YAGxF,CAAA;AAED;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA+BG;AACH,eAAO,MAAM,UAAU,GAAI,CAAC,GAAG,KAAK,EAAE,CAAC,GAAG,KAAK,QACvC,MAAM,QACN,MAAM,CAAC,MAAM,CAAC,UAAU,EAAE,CAAC,EAAE,CAAC,CAAC,YAC3B,iBAAiB,KAC1B,KAAK,CAAC,CAAC,EAAE,CAAC,CAGX,CAAA;AAEF;;;;;;;;;;;GAWG;AACH,eAAO,MAAM,SAAS,SAAU,MAAM,YAAY,YAAY,KAAG,YAI/D,CAAA;AAEF;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAgEG;AACH,eAAO,MAAM,MAAM,GAAI,EAAE,GAAG,KAAK,EAAE,IAAI,GAAG,OAAO,OAAK,OAAO,CAAC,OAAO,CACnE,GAAG,CAAC,qBAAqB,CAAC,KAAK,CAAC,QAAQ,GAAG,EAAE,CAAC,CAAC,EAC/C,QAAQ,GAAG,EAAE,EACb,IAAI,EACJ,GAAG,CAAC,qBAAqB,CAAC,UAAU,CAAC,EACrC,EAAE,EACF,IAAI,CAmDH,CAAA;AAEH;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAwEG;AACH,eAAO,MAAM,MAAM,GACjB,EAAE,GAAG,KAAK,EACV,IAAI,GAAG,OAAO,EACd,EAAE,SAAS,KAAK,CAAC,GAAG,EAAE,GAAG,CAAC,GAAG,YAAY,GAAG,KAAK,GAAG,YAAY,OAC7D,OAAO,CAAC,OAAO,CAClB,GAAG,CAAC,qBAAqB,CAAC,UAAU,CAAC,EACrC,QAAQ,GAAG,EAAE,GAAG,CAAC,EAAE,SAAS,KAAK,CAAC,MAAM,CAAC,EAAE,GAAG,CAAC,GAAG,CAAC,GAAG,KAAK,CAAC,EAC5D,IAAI,EACJ,GAAG,CAAC,qBAAqB,CAAC,EAAE,CAAC,EAC7B,EAAE,EACF,IAAI,EACJ,EAAE,SAAS,KAAK,CAAC,GAAG,EAAE,MAAM,CAAC,CAAC,GAAG,CAAC,GAAG,KAAK,CAwH3C,CAAA"}