edf2csv 0.5.81 → 0.5.83

package/CHANGELOG.md

@@ -3,6 +3,74 @@
 Notable changes to edf2csv. Versions follow [semantic versioning](https://semver.org); while the
 major version is 0, a minor bump may contain breaking changes.
 
+## 0.5.83
+
+### Fixed: a physical span too small to represent became a flat channel, silently
+
+```
+time_s,MAG
+0.000,0.000
+0.250,0.000
+0.500,0.000
+```
+
+Eight samples spanning digital -16,000 to +12,000, all written as the same number, no
+diagnostic anywhere, `--strict` exiting 0. The header declares -1e-320 to 1e-320 over the full
+16-bit range: 65,536 distinct physical values, none of them equal to another.
+
+The gain is the span over the digital range — 2e-320/65535, or 3e-325, which is smaller than
+the smallest subnormal double and underflows to +0. `makeScaler` tests `gain === 0` and takes
+its flat-range branch, whose comment is correct about the case it was written for: "A flat
+physical range makes every sample the same value ... That mapping is defined, so its constant
+is written." An underflowed gain is not a flat range, and from inside that test the two look
+identical.
+
+The answer was already in the function, eight lines below. Overflow gets it: "the physical span
+overflowed a double, so there is no mapping at all. Returning physicalMin filled the column with
+one enormous constant — every distinct sample rendered as the same 300-digit number — and raised
+nothing." Underflow is the same fact about the same header and now takes the same route: empty
+cells, and `UNUSABLE_PHYSICAL_RANGE` saying the span is too small rather than too large.
+
+A genuinely flat range still writes its constant. That mapping is defined, every sample really
+is that value, and it has `DEGENERATE_PHYSICAL_RANGE` of its own.
+
+One power of ten away, at 1e-319, the same file has always raised `VALUE_RESOLUTION` — this was
+the one gap in a row of neighbours that all report themselves.
+
+## 0.5.82
+
+### Fixed: `--stdout --gzip` onto a full destination announced every row and exited 0
+
+```
+$ edf2csv rec.edf --stdout --gzip > /Volumes/small/out.csv.gz
+error: Writing to stdout failed: ENOSPC: no space left on device, write
+Wrote 102,400 rows to stdout.
+$ echo $?
+0
+```
+
+Two lines that cannot both be true, and the exit code agreed with the wrong one. The file was
+11,270 bytes short of the 470,022 the stream needs, its gzip member had no trailer, and
+`gzip -dc` refused it. Through `--out`, on the same volume with the same free space, the
+identical failure is reported and exits 1.
+
+`compressed()` returned an already-resolved `settled` for the stdout path, so `await
+entry.settled` waited for nothing: the conversion declared itself finished while the
+compressor still held the tail, and the ENOSPC arrived afterwards, too late to be anything
+but a line on stderr. The byte audit could not catch it either — it stats the descriptor as
+soon as the writers are done, which on this path is before the compressor has flushed.
+
+It waits on `finished(compressor)` now. That is the source side, so `end: !toStdout` is
+untouched and nothing here closes stdout; what it waits for is the compressor pushing its last
+chunks into a write that fails.
+
+One thing the wait must not do is turn `--stdout --gzip | head` into a failure. A reader
+closing the pipe is documented as ordinary and answers with "Stopped: the reader closed the
+pipe after 52,507 of 102,400 rows had been written", exit 0 — and waiting surfaced that EPIPE
+as an error until it was filtered out, which the first attempt at this fix did. It is the same
+error the writer already records as a hang-up. Both cases are tested on the disk image now: the
+one that must fail, and the one that must not.
+
 ## 0.5.81
 
 ### Fixed: the listener leak 0.5.36 fixed, still there one flag away

package/dist/convert/run.js

@@ -829,8 +829,41 @@ function compressed(target, gzip) {
     */
     const toStdout = target === process.stdout;
     compressor.pipe(target, { end: !toStdout });
-    if (toStdout)
-        return { stream: compressor, settled: Promise.resolve(), release };
+    if (toStdout) {
+        /*
+          Waited on, even though stdout is not ours to end.
+    
+          This returned an already-resolved promise, so `await entry.settled` waited for nothing
+          and the conversion declared itself finished while the compressor still held the tail of
+          the stream. `--stdout --gzip` onto a destination that filled up therefore printed the
+          ENOSPC *and then* "Wrote 102,400 rows to stdout." — and exited 0, over a file 11,270
+          bytes short whose gzip member has no trailer and will not decompress. Through `--out`,
+          on the same volume with the same space, the identical failure is reported and exits 1.
+    
+          The byte audit could not see it either: it stats the descriptor as soon as the writers
+          are done, which on this path is before the compressor has pushed its last chunks.
+    
+          `finished(compressor)` is the source side, not the destination — it resolves when the
+          compressor has flushed everything into stdout, and it is stdout's own write that fails.
+          That keeps `end: !toStdout` exactly as it was: nothing here closes stdout.
+        */
+        const flushed = finished(compressor).catch((error) => {
+            /*
+              EPIPE is not a failure here, and turning it into one is the trap this nearly fell
+              into: `--stdout --gzip | head` is an ordinary thing to type, and the documented
+              answer to it is "Stopped: the reader closed the pipe after 52,507 of 102,400 rows
+              had been written", exit 0. Waiting on the compressor surfaced the EPIPE that the
+              uncompressed path already routes through the writer's hang-up flag — the writer
+              sees the same error, forwarded, and records it — so the wait has to let that one
+              through and keep everything else.
+            */
+            if (error?.code === 'EPIPE')
+                return;
+            throw error;
+        });
+        flushed.catch(() => { });
+        return { stream: compressor, settled: flushed, release };
+    }
     /*
       A failure under the compressor rejects both this promise and the writer's own end(),
       and end() is the one awaited first. Without a handler attached here that rejection

package/dist/convert/run.js.map

@@ -1 +1 @@
-{"version":3,"file":"run.js","sourceRoot":"","sources":["../../src/convert/run.ts"],"names":[],"mappings":"AAAA;;;;;;GAMG;AAEH,OAAO,EAAE,iBAAiB,EAAE,SAAS,EAAE,MAAM,SAAS,CAAC;AACvD,OAAO,EAAE,KAAK,EAAE,OAAO,EAAE,IAAI,EAAE,SAAS,EAAE,MAAM,kBAAkB,CAAC;AACnE,OAAO,EAAE,UAAU,EAAE,MAAM,aAAa,CAAC;AACzC,OAAO,EAAE,gBAAgB,EAAE,MAAM,SAAS,CAAC;AAC3C,OAAO,EAAE,QAAQ,EAAE,QAAQ,EAAE,MAAM,sBAAsB,CAAC;AAE1D,OAAO,EAAE,UAAU,EAAE,QAAQ,EAAE,MAAM,WAAW,CAAC;AACjD,OAAO,IAAI,MAAM,WAAW,CAAC;AAG7B,OAAO,EAAE,OAAO,EAAE,MAAM,kBAAkB,CAAC;AAC3C,OAAO,EAAE,cAAc,EAAE,WAAW,EAAE,eAAe,EAAE,MAAM,kBAAkB,CAAC;AAEhF,OAAO,EAAE,QAAQ,EAAE,MAAM,kBAAkB,CAAC;AAE5C,OAAO,EACL,kBAAkB,EAClB,uBAAuB,EACvB,QAAQ,EACR,MAAM,EACN,cAAc,GACf,MAAM,kBAAkB,CAAC;AAC1B,OAAO,EAAE,MAAM,EAAE,MAAM,mBAAmB,CAAC;AAC3C,OAAO,EACL,KAAK,EACL,mBAAmB,EACnB,iBAAiB,EACjB,eAAe,EACf,oBAAoB,GACrB,MAAM,qBAAqB,CAAC;AAE7B,OAAO,EAAE,SAAS,EAAE,sBAAsB,EAAE,MAAM,WAAW,CAAC;AAE9D,OAAO,EAAE,kBAAkB,EAAE,MAAM,aAAa,CAAC;AACjD,OAAO,EAAE,mBAAmB,EAAE,YAAY,EAAE,MAAM,iBAAiB,CAAC;AACpE,OAAO,EAAE,OAAO,IAAI,YAAY,EAAE,MAAM,eAAe,CAAC;AAExD,OAAO,EAAE,YAAY,EAAE,CAAC;AAWxB;;;;;;;;;GASG;AACH,MAAM,CAAC,MAAM,iBAAiB,GAAqC,IAAI,GAAG,CAAC,CAAC,qBAAqB,CAAC,CAAC,CAAC;AAEpG,MAAM,OAAO,eAAgB,SAAQ,KAAK;IAC/B,IAAI,CAAsB;IAC1B,IAAI,CAAqB;IAClC,YAAY,IAAyB,EAAE,OAAe,EAAE,IAAa,EAAE,OAAsB;QAC3F,KAAK,CAAC,OAAO,EAAE,OAAO,CAAC,CAAC;QACxB,IAAI,CAAC,IAAI,GAAG,iBAAiB,CAAC;QAC9B,IAAI,CAAC,IAAI,GAAG,IAAI,CAAC;QACjB,IAAI,CAAC,IAAI,GAAG,IAAI,CAAC;IACnB,CAAC;CACF;AA8DD,MAAM,CAAC,KAAK,UAAU,OAAO,CAAC,SAAiB,EAAE,UAA0B,EAAE;IAC3E,MAAM,SAAS,GAAG,IAAI,CAAC,GAAG,EAAE,CAAC;IAC7B,MAAM,IAAI,GAAG,MAAM,OAAO,CAAC,IAAI,CAAC,SAAS,CAAC,CAAC;IAE3C,IAAI,CAAC;QACH;;;;;;;;;;;;;;UAcE;QACF,MAAM,cAAc,GAAG,OAAO,CAAC,QAAQ,KAAK,IAAI,CAAC,CAAC,CAAC,MAAM,IAAI,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC;QAE9E,+EAA+E;QAC/E,8EAA8E;QAC9E,iFAAiF;QACjF,wCAAwC;QACxC,MAAM,cAAc,GAClB,IAAI,CAAC,iBAAiB,CAAC,MAAM,GAAG,CAAC;YAC/B,CAAC,CAAC,MAAM,IAAI,CAAC,eAAe,EAAE;YAC9B,CAAC,CAAC,EAAE,WAAW,EAAE,EAAkB,EAAE,YAAY,EAAE,EAAuB,EAAE,SAAS,EAAE,CAAC,EAAE,CAAC;QAE/F,MAAM,MAAM,GAAG,kBAAkB,CAAC,IAAI,EAAE,cAAc,CAAC,CAAC;QAExD,MAAM,IAAI,GAAG,SAAS,CACpB;YACE,OAAO,EAAE,IAAI,CAAC,MAAM,CAAC,OAAO;YAC5B,cAAc,EAAE,IAAI,CAAC,MAAM,CAAC,cAAc;YAC1C,WAAW,EAAE,IAAI,CAAC,WAAW;YAC7B,oBAAoB,EAAE,IAAI,CAAC,iBAAiB,CAAC,MAAM,GAAG,CAAC;YACvD,YAAY,EAAE,MAAM,CAAC,MAAM;SAC5B,EACD,OAAO,CACR,CAAC;QACF,IAAI,CAAC,WAAW,CAAC,IAAI,CAAC,GAAG,MAAM,CAAC,WAAW,CAAC,CAAC;QAE7C,IAAI,OAAO,CAAC,QAAQ,KAAK,IAAI,EAAE,CAAC;YAC9B,IAAI,CAAC,IAAI,CAAC,YAAY,EAAE,CAAC;gBACvB,MAAM,IAAI,eAAe,CACvB,qBAAqB,EACrB,4EAA4E,EAC5E,4BAA4B,CAC7B,CAAC;YACJ,CAAC;YACD;;;;;;;;;;;;cAYE;YACF,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;gBAC7B,MAAM,IAAI,eAAe,CACvB,qBAAqB,EACrB,IAAI,CAAC,WAAW,CAAC,MAAM,KAAK,CAAC;oBAC3B,CAAC,CAAC,+EAA+E;wBAC/E,wBAAwB;oBAC1B,CAAC,CAAC,kFAAkF,EACtF,IAAI,CAAC,WAAW,CAAC,MAAM,KAAK,CAAC;oBAC3B,CAAC,CAAC,sEAAsE;oBACxE,CAAC,CAAC,+EAA+E,CACpF,CAAC;YACJ,CAAC;YAED,oFAAoF;YACpF,IAAI,IAAI,CAAC,MAAM,KAAK,MAAM,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;gBACvD,MAAM,IAAI,eAAe,CACvB,qBAAqB;gBACrB,iFAAiF;gBACjF,+EAA+E;gBAC/E,gFAAgF;gBAChF,0DAA0D;gBAC1D,iEAAiE,IAAI,CAAC,MAAM,CAAC,MAAM,IAAI;oBACrF,8CAA8C;oBAC9C,IAAI,MAAM,CAAC,WAAW,CAAC,IAAI,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC,IAAI,EACnF,gFAAgF;oBAC9E,+CAA+C,CAClD,CAAC;YACJ,CAAC;YACD,IAAI,YAAY,GAAG,KAAK,CAAC;YACzB,MAAM,OAAO,GAAG,MAAM,gBAAgB,CAAC,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,MAAM,CAAC,MAAM,EAAE,OAAO,EAAE,CAAC,MAAM,EAAE,EAAE;gBAC1F,YAAY,GAAG,MAAM,CAAC;YACxB,CAAC,CAAC,CAAC;YACH,IAAI,MAAM,IAAI,CAAC,gBAAgB,EAAE;gBAAE,IAAI,CAAC,WAAW,CAAC,IAAI,CAAC,YAAY,CAAC,KAAK,CAAC,CAAC,CAAC;YAC9E,OAAO;gBACL,SAAS,EAAE,GAAG;gBACd,KAAK,EAAE,OAAO;gBACd,YAAY;gBACZ,eAAe,EAAE,CAAC;gBAClB,WAAW,EAAE,CAAC,GAAG,sBAAsB,CAAC,IAAI,CAAC,WAAW,CAAC,EAAE,GAAG,IAAI,CAAC,WAAW,CAAC;gBAC/E,IAAI;gBACJ,IAAI;gBACJ,SAAS,EAAE,IAAI,CAAC,GAAG,EAAE,GAAG,SAAS;aAClC,CAAC;QACJ,CAAC;QAED,MAAM,SAAS,GAAG,OAAO,CAAC,SAAS,IAAI,gBAAgB,CAAC,SAAS,CAAC,CAAC;QACnE,MAAM,gCAAgC,CAAC,SAAS,EAAE,SAAS,EAAE,IAAI,EAAE,IAAI,EAAE,OAAO,CAAC,CAAC;QAClF,MAAM,gBAAgB,CAAC,SAAS,EAAE,OAAO,CAAC,KAAK,KAAK,IAAI,CAAC,CAAC;QAE1D,MAAM,OAAO,GAAkB,EAAE,CAAC;QAElC,IAAI,IAAI,CAAC,YAAY,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;YAChD,MAAM,OAAO,GAAG,MAAM,gBAAgB,CAAC,IAAI,EAAE,IAAI,EAAE,SAAS,EAAE,MAAM,CAAC,MAAM,EAAE,OAAO,CAAC,CAAC;YACtF,OAAO,CAAC,IAAI,CAAC,GAAG,OAAO,CAAC,CAAC;QAC3B,CAAC;aAAM,IAAI,IAAI,CAAC,YAAY,EAAE,CAAC;YAC7B;;;;;;;;;;;;;;;;;cAiBE;YACF,MAAM,eAAe,GAAG,IAAI,CAAC,WAAW,CAAC,MAAM,KAAK,CAAC,CAAC;YACtD,IAAI,CAAC,WAAW,CAAC,IAAI,CAAC;gBACpB,IAAI,EAAE,YAAY;gBAClB,QAAQ,EAAE,SAAS;gBACnB,OAAO,EAAE,eAAe;oBACtB,CAAC,CAAC,kFAAkF;wBAClF,MAAM;oBACR,CAAC,CAAC,mFAAmF;wBACnF,4CAA4C;gBAChD,IAAI,EAAE,eAAe;oBACnB,CAAC,CAAC,8EAA8E;wBAC9E,mCAAmC;oBACrC,CAAC,CAAC,oFAAoF;wBACpF,UAAU;aACf,CAAC,CAAC;QACL,CAAC;QAED,IAAI,OAAO,CAAC,eAAe,KAAK,IAAI,IAAI,IAAI,CAAC,iBAAiB,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;YAC5E,IAAI,CAAC,WAAW,CAAC,IAAI,CAAC;gBACpB,IAAI,EAAE,gBAAgB;gBACtB,QAAQ,EAAE,SAAS;gBACnB,OAAO,EACL,iFAAiF;oBACjF,mCAAmC;gBACrC,IAAI,EAAE,8FAA8F;aACrG,CAAC,CAAC;QACL,CAAC;QAED,IAAI,kBAAkB,GAAG,CAAC,CAAC;QAC3B,IAAI,IAAI,CAAC,iBAAiB,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;YACtC,MAAM,MAAM,GAAG,MAAM,mBAAmB,CACtC,SAAS,EACT,cAAc,CAAC,WAAW,EAC1B,yBAAyB,CAAC,OAAO,EAAE,IAAI,CAAC,KAAK,CAAC,qBAAqB,CAAC,EACpE,OAAO,CAAC,IAAI,KAAK,IAAI,EACrB,OAAO,CAAC,GAAG,KAAK,IAAI,CACrB,CAAC;YACF,OAAO,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC;YACrB,kBAAkB,GAAG,MAAM,CAAC,IAAI,CAAC;QACnC,CAAC;QAED,OAAO,CAAC,IAAI,CACV,MAAM,gBAAgB,CAAC,SAAS,EAAE,IAAI,EAAE,IAAI,EAAE,OAAO,CAAC,IAAI,KAAK,IAAI,EAAE,OAAO,CAAC,GAAG,KAAK,IAAI,CAAC,CAC3F,CAAC;QAEF;;;;;;;;UAQE;QACF,MAAM,OAAO,GAAG,MAAM,IAAI,CAAC,gBAAgB,EAAE,CAAC;QAC9C,IAAI,OAAO;YAAE,IAAI,CAAC,WAAW,CAAC,IAAI,CAAC,YAAY,CAAC,OAAO,CAAC,QAAQ,KAAK,IAAI,CAAC,CAAC,CAAC;QAE5E,MAAM,aAAa,CACjB,SAAS,EACT,SAAS,EACT,IAAI,EACJ,IAAI,EACJ,OAAO,EACP,kBAAkB,EAClB,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,cAAc,CAChC,CAAC;QAEF,MAAM,KAAK,GAAG,MAAM,eAAe,CAAC,SAAS,EAAE,OAAO,CAAC,CAAC;QAExD,OAAO;YACL,SAAS;YACT,KAAK,EAAE,OAAO;YACd,YAAY,EAAE,KAAK;YACnB,eAAe,EAAE,kBAAkB;YACnC,WAAW,EAAE,CAAC,GAAG,sBAAsB,CAAC,IAAI,CAAC,WAAW,CAAC,EAAE,GAAG,IAAI,CAAC,WAAW,EAAE,GAAG,KAAK,CAAC;YACzF,IAAI;YACJ,IAAI;YACJ,SAAS,EAAE,IAAI,CAAC,GAAG,EAAE,GAAG,SAAS;SAClC,CAAC;IACJ,CAAC;YAAS,CAAC;QACT,MAAM,IAAI,CAAC,KAAK,EAAE,CAAC;IACrB,CAAC;AACH,CAAC;AAED;;;;;;;;;;;;;;;;EAgBE;AACF,MAAM,cAAc,GAClB,6GAA6G,CAAC;AAEhH;;;;;;;GAOG;AACH,KAAK,UAAU,eAAe,CAC5B,SAAiB,EACjB,OAA+B;IAE/B,MAAM,OAAO,GAAG,MAAM,OAAO,CAAC,SAAS,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,CAAC;IAC3D,IAAI,CAAC,OAAO;QAAE,OAAO,EAAE,CAAC;IAExB,qFAAqF;IACrF,MAAM,KAAK,GAAG,IAAI,GAAG,CAAC,CAAC,GAAG,OAAO,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,EAAE,eAAe,CAAC,CAAC,CAAC;IACxE,MAAM,KAAK,GAAG,OAAO,CAAC,MAAM,CAAC,CAAC,IAAI,EAAE,EAAE,CAAC,cAAc,CAAC,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,KAAK,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC;IAC7F,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC;QAAE,OAAO,EAAE,CAAC;IAElC,OAAO;QACL;YACE,IAAI,EAAE,cAAc;YACpB,QAAQ,EAAE,SAAS;YACnB;;;;;;;;;;cAUE;YACF,OAAO,EACL,GAAG,MAAM,CAAC,KAAK,CAAC,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,KAAK,6BAA6B;gBAClF,sCAAsC,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,MAAM,iBAAiB;YAC5F,IAAI,EACF,UAAU,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,MAAM,0CAA0C;gBACtF,mCAAmC;SACtC;KACF,CAAC;AACJ,CAAC;AAED,MAAM,UAAU,gBAAgB,CAAC,SAAiB;IAChD,MAAM,IAAI,GAAG,IAAI,CAAC,QAAQ,CAAC,SAAS,EAAE,IAAI,CAAC,OAAO,CAAC,SAAS,CAAC,CAAC,CAAC;IAC/D,OAAO,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,OAAO,CAAC,SAAS,CAAC,EAAE,GAAG,IAAI,MAAM,CAAC,CAAC;AAC3D,CAAC;AAED,yFAAyF;AACzF,KAAK,UAAU,gCAAgC,CAC7C,SAAiB,EACjB,SAAiB,EACjB,IAAa,EACb,IAAoB,EACpB,OAAuB;IAEvB;;;;;;;;MAQE;IACF,MAAM,MAAM,GAAG,OAAO,CAAC,IAAI,KAAK,IAAI,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,MAAM,CAAC;IAC1D,MAAM,KAAK,GAAG,IAAI,GAAG,CAAC,IAAI,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,QAAQ,CAAC,CAAC,CAAC;IAClE,IAAI,IAAI,CAAC,iBAAiB,CAAC,MAAM,GAAG,CAAC;QAAE,KAAK,CAAC,GAAG,CAAC,cAAc,MAAM,EAAE,CAAC,CAAC;IACzE,KAAK,CAAC,GAAG,CAAC,WAAW,MAAM,EAAE,CAAC,CAAC;IAC/B,KAAK,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC;IAE3B,MAAM,aAAa,GAAG,IAAI,CAAC,OAAO,CAAC,SAAS,CAAC,CAAC;IAC9C,MAAM,SAAS,GAAG,MAAM,IAAI,CAAC,SAAS,CAAC,CAAC;IAExC,KAAK,MAAM,IAAI,IAAI,KAAK,EAAE,CAAC;QACzB,MAAM,MAAM,GAAG,IAAI,CAAC,IAAI,CAAC,SAAS,EAAE,IAAI,CAAC,CAAC;QAC1C,MAAM,cAAc,GAAG,IAAI,CAAC,OAAO,CAAC,MAAM,CAAC,CAAC;QAC5C,MAAM,UAAU,GAAG,MAAM,IAAI,CAAC,MAAM,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,CAAC;QACxD,MAAM,QAAQ,GAAG,cAAc,KAAK,aAAa,CAAC;QAClD,MAAM,QAAQ,GACZ,UAAU,KAAK,IAAI,IAAI,UAAU,CAAC,GAAG,KAAK,SAAS,CAAC,GAAG,IAAI,UAAU,CAAC,GAAG,KAAK,SAAS,CAAC,GAAG,CAAC;QAC9F,IAAI,CAAC,QAAQ,IAAI,CAAC,QAAQ;YAAE,SAAS;QAErC,MAAM,IAAI,eAAe,CACvB,wBAAwB,EACxB,gBAAgB,MAAM,4CAA4C,EAClE,qEAAqE,CACtE,CAAC;IACJ,CAAC;AACH,CAAC;AAED,KAAK,UAAU,gBAAgB,CAAC,GAAW,EAAE,KAAc;IACzD;;;;;;;;;;;;MAYE;IACF,MAAM,MAAM,GAAG,IAAI,CAAC,OAAO,CAAC,GAAG,CAAC,CAAC;IACjC,IAAI,MAAM,IAAI,MAAM,KAAK,GAAG,EAAE,CAAC;QAC7B,IAAI,CAAC;YACH,MAAM,KAAK,CAAC,MAAM,EAAE,EAAE,SAAS,EAAE,IAAI,EAAE,CAAC,CAAC;QAC3C,CAAC;QAAC,OAAO,KAAc,EAAE,CAAC;YACxB,oFAAoF;YACpF,4EAA4E;YAC5E,yEAAyE;YACzE,MAAM,IAAI,GAAG,MAAM,IAAI,CAAC,MAAM,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,CAAC;YAClD,IAAI,IAAI,IAAI,CAAC,IAAI,CAAC,WAAW,EAAE,EAAE,CAAC;gBAChC,MAAM,IAAI,eAAe,CACvB,mBAAmB,EACnB,kBAAkB,GAAG,OAAO,MAAM,+BAA+B,EACjE,4EAA4E,CAC7E,CAAC;YACJ,CAAC;YACD,MAAM,IAAI,eAAe,CACvB,mBAAmB,EACnB,kBAAkB,GAAG,MAAM,eAAe,CAAC,KAAK,CAAC,GAAG,EACpD,oEAAoE,CACrE,CAAC;QACJ,CAAC;IACH,CAAC;IAED,IAAI,OAAO,GAAG,IAAI,CAAC;IACnB,IAAI,CAAC;QACH,MAAM,KAAK,CAAC,GAAG,CAAC,CAAC;IACnB,CAAC;IAAC,OAAO,KAAc,EAAE,CAAC;QACxB,IAAK,KAA+B,CAAC,IAAI,KAAK,QAAQ,EAAE,CAAC;YACvD,MAAM,IAAI,eAAe,CACvB,mBAAmB,EACnB,kBAAkB,GAAG,MAAM,eAAe,CAAC,KAAK,CAAC,GAAG,EACpD,oEAAoE,CACrE,CAAC;QACJ,CAAC;QACD,OAAO,GAAG,KAAK,CAAC;IAClB,CAAC;IAED,IAAI,CAAC,OAAO,EAAE,CAAC;QACb,MAAM,QAAQ,GAAG,MAAM,IAAI,CAAC,GAAG,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,CAAC;QAEnD,2EAA2E;QAC3E,+EAA+E;QAC/E,IAAI,QAAQ,IAAI,CAAC,QAAQ,CAAC,WAAW,EAAE,EAAE,CAAC;YACxC,MAAM,IAAI,eAAe,CACvB,mBAAmB,EACnB,IAAI,GAAG,wDAAwD,EAC/D,gCAAgC,CACjC,CAAC;QACJ,CAAC;QACD,IAAI,CAAC,KAAK,EAAE,CAAC;YACX,MAAM,IAAI,eAAe,CACvB,eAAe,EACf,IAAI,GAAG,mBAAmB,EAC1B,yEAAyE,CAC1E,CAAC;QACJ,CAAC;IACH,CAAC;AACH,CAAC;AAED,uEAAuE;AACvE,SAAS,eAAe,CAAC,KAAc;IACrC,MAAM,IAAI,GAAI,KAA2C,EAAE,IAAI,CAAC;IAChE,IAAI,IAAI,KAAK,QAAQ,IAAI,IAAI,KAAK,OAAO;QAAE,OAAO,mBAAmB,CAAC;IACtE,IAAI,IAAI,KAAK,QAAQ;QAAE,OAAO,kBAAkB,CAAC;IACjD,IAAI,IAAI,KAAK,SAAS;QAAE,OAAO,6CAA6C,CAAC;IAC7E,IAAI,IAAI,KAAK,OAAO;QAAE,OAAO,6BAA6B,CAAC;IAC3D,IAAI,IAAI,KAAK,cAAc;QAAE,OAAO,sBAAsB,CAAC;IAC3D,OAAO,KAAK,YAAY,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC;AAChE,CAAC;AAED,KAAK,UAAU,gBAAgB,CAC7B,IAAa,EACb,IAAoB,EACpB,SAAwB,EACxB,YAAiC,EACjC,OAAuB,EACvB,QAAoC;IAEpC,sFAAsF;IACtF,MAAM,OAAO,GAAG,eAAe,EAAE,CAAC;IAClC,8EAA8E;IAC9E,MAAM,YAAY,GAAG,oBAAoB,EAAE,CAAC;IAC5C,yFAAyF;IACzF,yDAAyD;IACzD,MAAM,KAAK,GAAG,SAAS,KAAK,IAAI,CAAC,CAAC,CAAC,WAAW,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC;IACxD;;;;MAIE;IACF,IAAI,MAAM,GAMC,IAAI,CAAC;IAEhB;;;;;;;;;;;;MAYE;IACF,MAAM,mBAAmB,GAAG,CAAC,GAAG,IAAI,CAAC;IACrC,MAAM,cAAc,GAAG,IAAI,CAAC,GAAG,CAC7B,mBAAmB,EACnB,IAAI,CAAC,KAAK,CAAC,uBAAuB,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CACtE,CAAC;IACF;;;;;;;MAOE;IACF,MAAM,YAAY,GAAG,IAAI,CAAC,GAAG,CAC3B,EAAE,GAAG,IAAI,EACT,IAAI,CAAC,KAAK,CAAC,uBAAuB,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CACtE,CAAC;IAEF,MAAM,IAAI,GAAgB,IAAI,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,UAAU,EAAE,EAAE;QAC9D,sFAAsF;QACtF,gFAAgF;QAChF,MAAM,MAAM,GACV,MAAM,EAAE,MAAM;YACd,CAAC,SAAS,KAAK,IAAI;gBACjB,CAAC,CAAC,OAAO,CAAC,MAAM;gBAChB,CAAC,CAAC,iBAAiB,CAAC,IAAI,CAAC,IAAI,CAAC,SAAS,EAAE,KAAK,CAAC,QAAQ,CAAC,EAAE;oBACtD,aAAa,EAAE,YAAY;iBAC5B,CAAC,CAAC,CAAC;QACV,MAAM,EAAE,MAAM,EAAE,OAAO,EAAE,OAAO,EAAE,GAAG,MAAM,IAAI,UAAU,CAAC,MAAM,EAAE,OAAO,CAAC,IAAI,KAAK,IAAI,CAAC,CAAC;QACzF;;;;;;;;;;;;;;UAcE;QACF,IAAI,KAAK,IAAI,MAAM,KAAK,MAAM,IAAI,CAAC,MAAM,EAAE,CAAC;YAC1C,MAAM,CAAC,EAAE,CAAC,MAAM,EAAE,CAAC,KAAa,EAAE,EAAE,CAAC,KAAK,CAAC,KAAK,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC;QAClE,CAAC;QACD;;;;;;UAME;QACF,MAAM,MAAM,GAAG,MAAM,EAAE,MAAM,IAAI,IAAI,kBAAkB,CAAC,MAAM,EAAE,cAAc,CAAC,CAAC;QAChF,IAAI,IAAI,CAAC,MAAM,KAAK,MAAM,IAAI,CAAC,MAAM;YAAE,MAAM,GAAG,EAAE,MAAM,EAAE,OAAO,EAAE,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,CAAC;QAE7F,oFAAoF;QACpF,IAAI,IAAI,CAAC,MAAM,KAAK,MAAM,IAAI,UAAU,KAAK,CAAC,EAAE,CAAC;YAC/C,IAAI,OAAO,CAAC,GAAG,KAAK,IAAI;gBAAE,MAAM,CAAC,IAAI,CAAC,QAAQ,CAAC,CAAC;YAChD,MAAM,CAAC,QAAQ,CACb,IAAI,CAAC,MAAM,KAAK,MAAM;gBACpB,CAAC,CAAC,MAAM,CAAC,CAAC,QAAQ,EAAE,SAAS,EAAE,OAAO,CAAC,CAAC;gBACxC,CAAC,CAAC,MAAM,CAAC,CAAC,QAAQ,EAAE,GAAG,KAAK,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,CAC/D,CAAC;QACJ,CAAC;QACD,OAAO;YACL,KAAK;YACL,MAAM;YACN,UAAU,EAAE,KAAK,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,mBAAmB,CAAC,CAAC,CAAC,MAAM,EAAE,CAAC,CAAC,QAAQ,EAAE,YAAY,CAAC,CAAC;YAC9F,UAAU,EAAE,iBAAiB,CAC3B,KAAK,CAAC,gBAAgB,EACtB,KAAK,CAAC,IAAI,EACV,KAAK,CAAC,YAAY,EAClB,OAAO,CACR;YACD,IAAI,EAAE,CAAC;YACP,OAAO;YACP,OAAO;SACR,CAAC;IACJ,CAAC,CAAC,CAAC;IAEH,IAAI,CAAC;QACH,MAAM,OAAO,GAAG,MAAM,gBAAgB,CAAC,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,YAAY,EAAE,OAAO,CAAC,CAAC;QAEhF;;;;;;;UAOE;QACF,IAAI,KAAK,EAAE,CAAC;YACV,mFAAmF;YACnF,iDAAiD;YACjD,IAAI,OAAO,CAAC,IAAI,KAAK,IAAI,EAAE,CAAC;gBAC1B;;;;;;;;kBAQE;gBACF,KAAK,MAAM,MAAM,IAAI,IAAI,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,EAAE,CAAC;oBAChE,KAAK,CAAC,KAAK,CAAC,MAAM,CAAC,QAAQ,CAAC,CAAC;gBAC/B,CAAC;YACH,CAAC;YACD,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,MAAM,CAAC,MAAM,CAAC;gBAAE,KAAK,CAAC,MAAM,EAAE,CAAC;QACjE,CAAC;QACD,QAAQ,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC;QACtD,OAAO,OAAO,CAAC;IACjB,CAAC;IAAC,OAAO,KAAK,EAAE,CAAC;QACf,KAAK,MAAM,KAAK,IAAI,IAAI;YAAE,KAAK,CAAC,MAAM,CAAC,OAAO,EAAE,CAAC;QAEjD;;;;;;;;;;;UAWE;QACF,yFAAyF;QACzF,kFAAkF;QAClF,uFAAuF;QACvF,IAAI,KAAK,YAAY,eAAe;YAAE,MAAM,KAAK,CAAC;QAElD,IAAI,KAAK,YAAY,QAAQ,EAAE,CAAC;YAC9B,MAAM,KAAK,GAAG,SAAS,KAAK,IAAI,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC,CAAC,IAAI,SAAS,GAAG,CAAC;YAC/D,MAAM,IAAI,eAAe,CACvB,kBAAkB,EAClB,KAAK,CAAC,OAAO,EACb,GAAG,KAAK,CAAC,IAAI,CAAC,CAAC,CAAC,GAAG,KAAK,CAAC,IAAI,GAAG,CAAC,CAAC,CAAC,EAAE,uBAAuB,KAAK,uBAAuB;gBACtF,oCAAoC,CACvC,CAAC;QACJ,CAAC;QAED,MAAM,MAAM,GAAG,KAAK,YAAY,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC;QACtE,MAAM,IAAI,eAAe,CACvB,cAAc,EACd,cAAc,SAAS,KAAK,IAAI,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC,CAAC,IAAI,SAAS,GAAG,YAAY,MAAM,EAAE,EAClF,SAAS,CAAC,KAAK,EAAE,SAAS,KAAK,IAAI,CAAC,CACrC,CAAC;IACJ,CAAC;AACH,CAAC;AAED;;;;;;;;;;;GAWG;AACH;;;;;;;GAOG;AACH,SAAS,WAAW,CAAC,CAAS,EAAE,CAAS;IACvC,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,IAAI,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,KAAK,CAAC;AACvE,CAAC;AAED,sFAAsF;AACtF,SAAS,QAAQ,CACf,IAA0B,EAC1B,OAAmB,EACnB,WAAmB,EACnB,QAAgB;IAEhB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QACrC,MAAM,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC;QACtB,IAAI,CAAC,KAAK;YAAE,SAAS;QACrB,MAAM,MAAM,GAAG,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;QAC/B,IAAI,MAAM,IAAI,KAAK,CAAC,KAAK,CAAC,gBAAgB;YAAE,SAAS;QACrD,IAAI,WAAW,GAAG,MAAM,GAAG,KAAK,CAAC,KAAK,CAAC,IAAI,KAAK,QAAQ,EAAE,CAAC;YACzD,OAAO,KAAK,CAAC,UAAU,CAAC,WAAW,EAAE,MAAM,CAAC,CAAC;QAC/C,CAAC;IACH,CAAC;IACD,OAAO,EAAE,CAAC;AACZ,CAAC;AAED,KAAK,UAAU,eAAe,CAC5B,IAAa,EACb,IAA0B,EAC1B,KAAkB,EAClB,aAAqB,EACrB,WAAmB,EACnB,KAA8B;IAE9B,MAAM,MAAM,GAAG,IAAI,CAAC,CAAC,CAAC,EAAE,MAAM,CAAC;IAC/B,IAAI,CAAC,MAAM;QAAE,OAAO;IAEpB,MAAM,OAAO,GAAG,IAAI,UAAU,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC;IAC5C,0FAA0F;IAC1F,MAAM,GAAG,GAAgF,EAAE,CAAC;IAE5F,SAAS,CAAC;QACR,IAAI,QAAQ,GAAG,QAAQ,CAAC;QACxB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;YACrC,MAAM,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC;YACtB,IAAI,CAAC,KAAK;gBAAE,SAAS;YACrB,MAAM,MAAM,GAAG,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;YAC/B,IAAI,MAAM,IAAI,KAAK,CAAC,KAAK,CAAC,gBAAgB;gBAAE,SAAS;YACrD,MAAM,IAAI,GAAG,WAAW,GAAG,MAAM,GAAG,KAAK,CAAC,KAAK,CAAC,IAAI,CAAC;YACrD,IAAI,IAAI,GAAG,QAAQ;gBAAE,QAAQ,GAAG,IAAI,CAAC;QACvC,CAAC;QACD,IAAI,QAAQ,KAAK,QAAQ;YAAE,OAAO;QAElC;;;;;;;;;;;;;;;;;;UAkBE;QACF,MAAM,YAAY,GAAG,QAAQ,CAAC,IAAI,EAAE,OAAO,EAAE,WAAW,EAAE,QAAQ,CAAC,CAAC;QACpE,GAAG,CAAC,MAAM,GAAG,CAAC,CAAC;QACf,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;YACrC,MAAM,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC;YACtB,IAAI,CAAC,KAAK;gBAAE,SAAS;YACrB,MAAM,MAAM,GAAG,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;YAC/B,IAAI,MAAM,IAAI,KAAK,CAAC,KAAK,CAAC,gBAAgB;gBAAE,SAAS;YACrD,MAAM,IAAI,GAAG,WAAW,GAAG,MAAM,GAAG,KAAK,CAAC,KAAK,CAAC,IAAI,CAAC;YACrD,IAAI,IAAI,KAAK,QAAQ,EAAE,CAAC;gBACtB,sEAAsE;gBACtE,IAAI,CAAC,WAAW,CAAC,IAAI,EAAE,QAAQ,CAAC;oBAAE,SAAS;gBAC3C,IAAI,KAAK,CAAC,UAAU,CAAC,WAAW,EAAE,MAAM,CAAC,KAAK,YAAY;oBAAE,SAAS;YACvE,CAAC;YACD,OAAO,CAAC,CAAC,CAAC,GAAG,MAAM,GAAG,CAAC,CAAC;YACxB,qEAAqE;YACrE,IACE,CAAC,mBAAmB,CAAC,QAAQ,EAAE,KAAK,CAAC,YAAY,EAAE,KAAK,CAAC,UAAU,EAAE,YAAY,CAAC,KAAK,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC,EACpG,CAAC;gBACD,SAAS;YACX,CAAC;YACD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,KAAK,CAAC,KAAK,CAAC,QAAQ,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;gBACrD,GAAG,CAAC,IAAI,CAAC,EAAE,KAAK,EAAE,UAAU,EAAE,CAAC,EAAE,MAAM,EAAE,OAAO,EAAE,CAAC,EAAE,CAAC,CAAC;YACzD,CAAC;QACH,CAAC;QACD,IAAI,GAAG,CAAC,MAAM,KAAK,CAAC;YAAE,SAAS;QAC/B,IAAI,GAAG,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;YACnB,GAAG,CAAC,IAAI,CACN,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CACP,CAAC,CAAC,CAAC,KAAK,CAAC,KAAK,CAAC,QAAQ,CAAC,CAAC,CAAC,OAAO,CAAC,EAAE,MAAM,CAAC,KAAK,IAAI,CAAC,CAAC;gBACtD,CAAC,CAAC,CAAC,KAAK,CAAC,KAAK,CAAC,QAAQ,CAAC,CAAC,CAAC,OAAO,CAAC,EAAE,MAAM,CAAC,KAAK,IAAI,CAAC,CAAC,CACzD,CAAC;QACJ,CAAC;QAED,KAAK,MAAM,IAAI,IAAI,GAAG,EAAE,CAAC;YACvB,MAAM,OAAO,GAAG,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,QAAQ,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;YACxD,MAAM,MAAM,GAAG,IAAI,CAAC,KAAK,CAAC,UAAU,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;YACnD,IAAI,CAAC,OAAO,IAAI,CAAC,MAAM;gBAAE,SAAS;YAClC,IAAI,MAAM,CAAC,MAAM;gBAAE,OAAO;YAC1B,MAAM,CAAC,QAAQ,CACb,GAAG,IAAI,CAAC,KAAK,CAAC,UAAU,CAAC,WAAW,EAAE,IAAI,CAAC,MAAM,CAAC,IAAI,cAAc,CAAC,OAAO,CAAC,MAAM,CAAC,GAAG;gBACrF,GAAG,MAAM,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAK,EAAE,aAAa,EAAE,OAAO,CAAC,MAAM,EAAE,IAAI,CAAC,MAAM,CAAC,CAAC,EAAE,CAChF,CAAC;YACF,IAAI,CAAC,KAAK,CAAC,IAAI,EAAE,CAAC;YAClB,+EAA+E;YAC/E,IAAI,MAAM,CAAC,IAAI;gBAAE,MAAM,MAAM,CAAC,KAAK,EAAE,CAAC;QACxC,CAAC;IACH,CAAC;AACH,CAAC;AAED,KAAK,UAAU,gBAAgB,CAC7B,IAAa,EACb,IAAoB,EACpB,IAAiB,EACjB,YAAiC,EACjC,OAAuB;IAEvB,MAAM,EAAE,YAAY,EAAE,UAAU,EAAE,WAAW,EAAE,SAAS,EAAE,GAAG,IAAI,CAAC,KAAK,CAAC;IACxE,MAAM,EAAE,cAAc,EAAE,GAAG,IAAI,CAAC,MAAM,CAAC;IACvC,IAAI,WAAW,GAAG,CAAC,CAAC;IAEpB;;;;;;;MAOE;IACF,MAAM,SAAS,GAAG,GAAY,EAAE,CAAC,IAAI,CAAC,MAAM,GAAG,CAAC,IAAI,IAAI,CAAC,KAAK,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC;IAE/F,IAAI,KAAK,EAAE,MAAM,KAAK,IAAI,IAAI,CAAC,WAAW,CAAC,EAAE,WAAW,EAAE,SAAS,EAAE,CAAC,EAAE,CAAC;QACvE,IAAI,SAAS,EAAE;YAAE,MAAM;QACvB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,KAAK,CAAC,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;YAC3C,IAAI,SAAS,EAAE;gBAAE,MAAM;YACvB,MAAM,KAAK,GAAG,KAAK,CAAC,gBAAgB,GAAG,CAAC,CAAC;YACzC,MAAM,WAAW,GAAG,YAAY,CAAC,CAAC,CAAC,CAAC,YAAY,CAAC,KAAK,CAAC,IAAI,KAAK,GAAG,cAAc,CAAC,CAAC,CAAC,CAAC,KAAK,GAAG,cAAc,CAAC;YAE5G,IAAI,IAAI,CAAC,MAAM,KAAK,MAAM,EAAE,CAAC;gBAC3B,MAAM,eAAe,CAAC,IAAI,EAAE,IAAI,EAAE,KAAK,EAAE,CAAC,EAAE,WAAW,EAAE,IAAI,CAAC,KAAK,CAAC,CAAC;gBACrE,WAAW,EAAE,CAAC;gBACd,SAAS;YACX,CAAC;YAED,KAAK,MAAM,KAAK,IAAI,IAAI,EAAE,CAAC;gBACzB,MAAM,EAAE,KAAK,EAAE,MAAM,EAAE,UAAU,EAAE,UAAU,EAAE,GAAG,KAAK,CAAC;gBACxD,MAAM,EAAE,QAAQ,EAAE,IAAI,EAAE,GAAG,KAAK,CAAC;gBACjC,8DAA8D;gBAC9D,MAAM,KAAK,GAAG,YAAY,CAAC,IAAI,CAAC,CAAC;gBAEjC,KAAK,IAAI,MAAM,GAAG,CAAC,EAAE,MAAM,GAAG,KAAK,CAAC,gBAAgB,EAAE,MAAM,EAAE,EAAE,CAAC;oBAC/D,MAAM,IAAI,GAAG,WAAW,GAAG,MAAM,GAAG,IAAI,CAAC;oBACzC,IAAI,CAAC,mBAAmB,CAAC,IAAI,EAAE,YAAY,EAAE,UAAU,EAAE,KAAK,CAAC;wBAAE,SAAS;oBAE1E,IAAI,GAAG,GAAG,UAAU,CAAC,WAAW,EAAE,MAAM,CAAC,CAAC;oBAC1C,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,QAAQ,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;wBACzC,MAAM,OAAO,GAAG,QAAQ,CAAC,CAAC,CAAC,CAAC;wBAC5B,MAAM,MAAM,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC;wBAC7B,IAAI,CAAC,OAAO,IAAI,CAAC,MAAM;4BAAE,SAAS;wBAClC,GAAG,IAAI,GAAG,GAAG,MAAM,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAK,EAAE,CAAC,EAAE,OAAO,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC,CAAC;oBACvE,CAAC;oBACD,IAAI,MAAM,CAAC,MAAM;wBAAE,MAAM;oBACzB,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC;oBACrB,KAAK,CAAC,IAAI,EAAE,CAAC;oBAEb;;;;;;;;;;;;sBAYE;oBACF,IAAI,MAAM,CAAC,IAAI;wBAAE,MAAM,MAAM,CAAC,KAAK,EAAE,CAAC;gBACxC,CAAC;gBACD,MAAM,MAAM,CAAC,UAAU,EAAE,CAAC;YAC5B,CAAC;YAED,WAAW,EAAE,CAAC;QAChB,CAAC;QAED,IAAI,OAAO,CAAC,UAAU,EAAE,CAAC;YACvB;;;;;;;;;;;cAWE;YACF,IAAI,CAAC;gBACH,OAAO,CAAC,UAAU,CAAC;oBACjB,WAAW;oBACX,YAAY,EAAE,SAAS,GAAG,WAAW;oBACrC,4EAA4E;oBAC5E,wDAAwD;oBACxD,YAAY,EAAE,CAAC,GAAG,IAAI,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,MAAM,CAClE,CAAC,GAAG,EAAE,KAAK,EAAE,EAAE,CAAC,GAAG,GAAG,KAAK,CAAC,YAAY,EACxC,CAAC,CACF;iBACF,CAAC,CAAC;YACL,CAAC;YAAC,OAAO,KAAK,EAAE,CAAC;gBACf,MAAM,IAAI,eAAe,CACvB,iBAAiB,EACjB,kCAAkC,KAAK,YAAY,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,EAAE,EAC1F,qFAAqF;oBACnF,+DAA+D,EACjE,EAAE,KAAK,EAAE,CACV,CAAC;YACJ,CAAC;QACH,CAAC;IACH,CAAC;IAED,MAAM,MAAM,GAAG,IAAI,GAAG,EAAsB,CAAC;IAC7C,KAAK,MAAM,KAAK,IAAI,IAAI,EAAE,CAAC;QACzB,IAAI,MAAM,CAAC,GAAG,CAAC,KAAK,CAAC,MAAM,CAAC;YAAE,SAAS;QACvC,MAAM,CAAC,GAAG,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC;QACzB,IAAI,CAAC;YACH,MAAM,KAAK,CAAC,MAAM,CAAC,GAAG,EAAE,CAAC;YACzB,uFAAuF;YACvF,sFAAsF;YACtF,4DAA4D;YAC5D,MAAM,KAAK,CAAC,OAAO,CAAC;QACtB,CAAC;gBAAS,CAAC;YACT,6EAA6E;YAC7E,qFAAqF;YACrF,sEAAsE;YACtE,KAAK,CAAC,OAAO,EAAE,CAAC;QAClB,CAAC;IACH,CAAC;IAED,wFAAwF;IACxF,IAAI,IAAI,CAAC,MAAM,KAAK,MAAM,EAAE,CAAC;QAC3B,MAAM,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC;QACtB,IAAI,CAAC,KAAK;YAAE,OAAO,EAAE,CAAC;QACtB,OAAO,CAAC,EAAE,IAAI,EAAE,KAAK,CAAC,KAAK,CAAC,QAAQ,EAAE,IAAI,EAAE,IAAI,CAAC,MAAM,CAAC,CAAC,GAAG,EAAE,CAAC,EAAE,EAAE,CAAC,GAAG,GAAG,CAAC,CAAC,IAAI,EAAE,CAAC,CAAC,EAAE,CAAC,CAAC;IAC1F,CAAC;IACD,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,CAAC,EAAE,IAAI,EAAE,KAAK,CAAC,KAAK,CAAC,QAAQ,EAAE,IAAI,EAAE,KAAK,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC;AACjF,CAAC;AAED;;;;;;;GAOG;AACH,SAAS,UAAU,CACjB,MAAgB,EAChB,IAAa;IAEb,IAAI,CAAC,IAAI;QAAE,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,OAAO,EAAE,OAAO,CAAC,OAAO,EAAE,EAAE,OAAO,EAAE,GAAS,EAAE,GAAE,CAAC,EAAE,CAAC;IAC1F,MAAM,UAAU,GAAG,UAAU,EAAE,CAAC;IAChC;;;;;;;;;;;;;;MAcE;IACF,MAAM,OAAO,GAAG,CAAC,KAAY,EAAQ,EAAE;QACrC,UAAU,CAAC,OAAO,CAAC,KAAK,CAAC,CAAC;IAC5B,CAAC,CAAC;IACF,MAAM,CAAC,EAAE,CAAC,OAAO,EAAE,OAAO,CAAC,CAAC;IAC5B,MAAM,OAAO,GAAG,GAAS,EAAE;QACzB,IAAI,MAAM,KAAK,OAAO,CAAC,MAAM,IAAI,MAAM,KAAK,OAAO,CAAC,MAAM;YAAE,MAAM,CAAC,GAAG,CAAC,OAAO,EAAE,OAAO,CAAC,CAAC;IAC3F,CAAC,CAAC;IAEF;;;;;MAKE;IACF,MAAM,QAAQ,GAAG,MAAM,KAAK,OAAO,CAAC,MAAM,CAAC;IAC3C,UAAU,CAAC,IAAI,CAAC,MAAM,EAAE,EAAE,GAAG,EAAE,CAAC,QAAQ,EAAE,CAAC,CAAC;IAC5C,IAAI,QAAQ;QAAE,OAAO,EAAE,MAAM,EAAE,UAAU,EAAE,OAAO,EAAE,OAAO,CAAC,OAAO,EAAE,EAAE,OAAO,EAAE,CAAC;IAEjF;;;;;;;;;MASE;IACF,MAAM,OAAO,GAAG,QAAQ,CAAC,MAAM,CAAC,CAAC;IACjC,OAAO,CAAC,KAAK,CAAC,GAAG,EAAE,GAAE,CAAC,CAAC,CAAC;IACxB,OAAO,EAAE,MAAM,EAAE,UAAU,EAAE,OAAO,EAAE,OAAO,EAAE,CAAC;AAClD,CAAC;AAED;;;;;;;GAOG;AACH,KAAK,UAAU,eAAe,CAC5B,SAAiB,EACjB,IAAY,EACZ,QAAgB,EAChB,IAAI,GAAG,KAAK,EACZ,GAAG,GAAG,KAAK;IAEX,qFAAqF;IACrF,oFAAoF;IACpF,IAAI,GAAG;QAAE,QAAQ,GAAG,QAAQ,GAAG,QAAQ,CAAC;IACxC,IAAI,CAAC;QACH,uFAAuF;QACvF,iFAAiF;QACjF,MAAM,SAAS,CAAC,IAAI,CAAC,IAAI,CAAC,SAAS,EAAE,IAAI,CAAC,EAAE,IAAI,CAAC,CAAC,CAAC,QAAQ,CAAC,QAAQ,CAAC,CAAC,CAAC,CAAC,QAAQ,EAAE,IAAI,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC;IAC/G,CAAC;IAAC,OAAO,KAAK,EAAE,CAAC;QACf,MAAM,MAAM,GAAG,KAAK,YAAY,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC;QACtE,MAAM,IAAI,eAAe,CACvB,cAAc,EACd,YAAY,IAAI,SAAS,SAAS,aAAa,MAAM,EAAE,EACvD,SAAS,CAAC,KAAK,CAAC,CACjB,CAAC;IACJ,CAAC;AACH,CAAC;AAED,KAAK,UAAU,gBAAgB,CAC7B,SAAiB,EACjB,IAAa,EACb,IAAoB,EACpB,IAAa,EACb,GAAY;IAEZ,MAAM,eAAe,GAAG,IAAI,GAAG,CAAC,IAAI,CAAC,MAAM,CAAC,OAAO,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC;IACnG,MAAM,OAAO,GAAG,IAAI,GAAG,EAAkB,CAAC;IAC1C,KAAK,MAAM,KAAK,IAAI,IAAI,CAAC,MAAM,EAAE,CAAC;QAChC,KAAK,MAAM,OAAO,IAAI,KAAK,CAAC,QAAQ;YAAE,OAAO,CAAC,GAAG,CAAC,OAAO,CAAC,MAAM,CAAC,KAAK,EAAE,KAAK,CAAC,QAAQ,CAAC,CAAC;IAC1F,CAAC;IAED,MAAM,KAAK,GAAG;QACZ,MAAM,CAAC;YACL,QAAQ;YACR,cAAc;YACd,OAAO;YACP,MAAM;YACN,kBAAkB;YAClB,oBAAoB;YACpB,cAAc;YACd,cAAc;YACd,aAAa;YACb,aAAa;YACb,YAAY;YACZ,cAAc;YACd,aAAa;YACb,WAAW;SACZ,CAAC;KACH,CAAC;IAEF,KAAK,MAAM,MAAM,IAAI,IAAI,CAAC,MAAM,CAAC,OAAO,EAAE,CAAC;QACzC,IAAI,MAAM,CAAC,aAAa;YAAE,SAAS;QACnC,MAAM,MAAM,GAAG,IAAI,CAAC,WAAW,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,UAAU,MAAM,CAAC,KAAK,EAAE,CAAC;QAC9E,KAAK,CAAC,IAAI,CACR,MAAM,CAAC;YACL,MAAM;YACN,MAAM,CAAC,MAAM,CAAC,KAAK,CAAC;YACpB,MAAM,CAAC,KAAK;YACZ,MAAM,CAAC,iBAAiB;YACxB,MAAM,CAAC,MAAM,CAAC,YAAY,CAAC;YAC3B,MAAM,CAAC,MAAM,CAAC,gBAAgB,CAAC;YAC/B,MAAM,CAAC,MAAM,CAAC,WAAW,CAAC;YAC1B,MAAM,CAAC,MAAM,CAAC,WAAW,CAAC;YAC1B,MAAM,CAAC,MAAM,CAAC,UAAU,CAAC;YACzB,MAAM,CAAC,MAAM,CAAC,UAAU,CAAC;YACzB,MAAM,CAAC,UAAU;YACjB,MAAM,CAAC,YAAY;YACnB,OAAO,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,EAAE;YAC/B,eAAe,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,IAAI;SACjD,CAAC,CACH,CAAC;IACJ,CAAC;IAED,MAAM,IAAI,GAAG,IAAI,CAAC,CAAC,CAAC,iBAAiB,CAAC,CAAC,CAAC,cAAc,CAAC;IACvD,MAAM,eAAe,CAAC,SAAS,EAAE,IAAI,EAAE,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,GAAG,IAAI,EAAE,IAAI,EAAE,GAAG,CAAC,CAAC;IAC3E,OAAO,EAAE,IAAI,EAAE,IAAI,EAAE,KAAK,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;AAC1C,CAAC;AAED;;;;;;;;;;;;;;;;;;;EAmBE;AACF,SAAS,yBAAyB,CAChC,OAAuB,EACvB,cAAsB;IAEtB,MAAM,IAAI,GAAG,OAAO,CAAC,KAAK,IAAI,CAAC,QAAQ,CAAC;IACxC,MAAM,EAAE,GACN,OAAO,CAAC,GAAG,KAAK,SAAS;QACvB,CAAC,CAAC,OAAO,CAAC,GAAG;QACb,CAAC,CAAC,OAAO,CAAC,QAAQ,KAAK,SAAS;YAC9B,CAAC,CAAC,CAAC,OAAO,CAAC,KAAK,IAAI,cAAc,CAAC,GAAG,OAAO,CAAC,QAAQ;YACtD,CAAC,CAAC,QAAQ,CAAC;IACjB,OAAO,EAAE,IAAI,EAAE,EAAE,EAAE,CAAC;AACtB,CAAC;AAED,KAAK,UAAU,mBAAmB,CAChC,SAAiB,EACjB,WAAkC,EAClC,MAAoC,EACpC,IAAa,EACb,GAAY;IAEZ,MAAM,QAAQ,GAAG,WAAW;SACzB,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,KAAK,IAAI,MAAM,CAAC,IAAI,IAAI,CAAC,CAAC,KAAK,GAAG,MAAM,CAAC,EAAE,CAAC;SAC5D,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,KAAK,IAAI,CAAC,CAAC,WAAW,GAAG,CAAC,CAAC,WAAW,CAAC,CAAC;IAEtE,MAAM,KAAK,GAAG,CAAC,MAAM,CAAC,CAAC,SAAS,EAAE,YAAY,EAAE,aAAa,EAAE,cAAc,CAAC,CAAC,CAAC,CAAC;IACjF,KAAK,MAAM,UAAU,IAAI,QAAQ,EAAE,CAAC;QAClC,KAAK,CAAC,IAAI,CACR,MAAM,CAAC;YACL,MAAM,CAAC,UAAU,CAAC,KAAK,CAAC;YACxB,UAAU,CAAC,QAAQ,KAAK,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,UAAU,CAAC,QAAQ,CAAC;YAC/D,UAAU,CAAC,IAAI;YACf,MAAM,CAAC,UAAU,CAAC,WAAW,CAAC;SAC/B,CAAC,CACH,CAAC;IACJ,CAAC;IAED,MAAM,IAAI,GAAG,IAAI,CAAC,CAAC,CAAC,oBAAoB,CAAC,CAAC,CAAC,iBAAiB,CAAC;IAC7D,MAAM,eAAe,CAAC,SAAS,EAAE,IAAI,EAAE,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,GAAG,IAAI,EAAE,IAAI,EAAE,GAAG,CAAC,CAAC;IAC3E,OAAO,EAAE,IAAI,EAAE,IAAI,EAAE,QAAQ,CAAC,MAAM,EAAE,CAAC;AACzC,CAAC;AAED;;;;;;;;;;;;GAYG;AACH,SAAS,SAAS,CAAC,KAAc,EAAE,QAAQ,GAAG,KAAK;IACjD;;;;;;;MAOE;IACF,MAAM,QAAQ,GAAG,QAAQ;QACvB,CAAC,CAAC,6EAA6E;QAC/E,CAAC,CAAC,kEAAkE,CAAC;IACvE,MAAM,SAAS,GAAG,QAAQ,CAAC,CAAC,CAAC,4BAA4B,CAAC,CAAC,CAAC,2BAA2B,CAAC;IACxF,MAAM,IAAI,GAAI,KAAsC,EAAE,IAAI,CAAC;IAC3D,QAAQ,IAAI,EAAE,CAAC;QACb,KAAK,QAAQ;YACX,OAAO,GAAG,QAAQ,oDAAoD,SAAS,GAAG,CAAC;QACrF,KAAK,QAAQ;YACX,OAAO,GAAG,QAAQ,oDAAoD,SAAS,GAAG,CAAC;QACrF,KAAK,QAAQ,CAAC;QACd,KAAK,OAAO;YACV,OAAO,GAAG,QAAQ,8CAA8C,SAAS,GAAG,CAAC;QAC/E,KAAK,OAAO;YACV,OAAO,GAAG,QAAQ,yCAAyC,SAAS,GAAG,CAAC;QAC1E,KAAK,QAAQ;YACX,OAAO,GAAG,QAAQ,2EAA2E,SAAS,GAAG,CAAC;QAC5G,KAAK,QAAQ;YACX,OAAO,GAAG,QAAQ,iGAAiG,CAAC;QACtH,KAAK,cAAc;YACjB,OAAO,GAAG,QAAQ,mDAAmD,QAAQ,CAAC,CAAC,CAAC,+BAA+B,CAAC,CAAC,CAAC,yCAAyC,GAAG,CAAC;QACjK,KAAK,QAAQ,CAAC;QACd,KAAK,QAAQ;YACX,OAAO,GAAG,QAAQ,yHAAyH,CAAC;QAC9I,KAAK,OAAO;YACV,OAAO,GAAG,QAAQ,2EAA2E,CAAC;QAChG;YACE,OAAO,GAAG,QAAQ,qDAAqD,CAAC;IAC5E,CAAC;AACH,CAAC;AAED;;;;;;;;;;;;;;;;;;;GAmBG;AACH,SAAS,WAAW;IAClB,IAAI,SAAiB,CAAC;IACtB,IAAI,CAAC;QACH,MAAM,IAAI,GAAG,SAAS,CAAC,CAAC,CAAC,CAAC;QAC1B,IAAI,CAAC,IAAI,CAAC,MAAM,EAAE;YAAE,OAAO,IAAI,CAAC;QAChC,SAAS,GAAG,IAAI,CAAC,IAAI,CAAC;IACxB,CAAC;IAAC,MAAM,CAAC;QACP,uFAAuF;QACvF,OAAO,IAAI,CAAC;IACd,CAAC;IAED,IAAI,QAAQ,GAAG,CAAC,CAAC;IACjB,OAAO;QACL,KAAK,EAAE,CAAC,KAAa,EAAQ,EAAE;YAC7B,QAAQ,IAAI,KAAK,CAAC;QACpB,CAAC;QACD,MAAM,EAAE,GAAS,EAAE;YACjB,IAAI,MAAc,CAAC;YACnB,IAAI,CAAC;gBACH,MAAM,GAAG,SAAS,CAAC,CAAC,CAAC,CAAC,IAAI,GAAG,SAAS,CAAC;YACzC,CAAC;YAAC,MAAM,CAAC;gBACP,OAAO;YACT,CAAC;YACD,IAAI,MAAM,IAAI,QAAQ;gBAAE,OAAO;YAC/B,MAAM,IAAI,eAAe,CACvB,cAAc,EACd,6BAA6B,QAAQ,GAAG,MAAM,OAAO,QAAQ,uBAAuB;gBAClF,iEAAiE,EACnE,+EAA+E;gBAC7E,gFAAgF;gBAChF,qFAAqF,CACxF,CAAC;QACJ,CAAC;KACF,CAAC;AACJ,CAAC;AAED,qFAAqF;AACrF,SAAS,MAAM,CAAC,OAA+B;IAC7C,OAAO,OAAO,CAAC,MAAM,CAAC,CAAC,KAAK,EAAE,IAAI,EAAE,EAAE,CAAC,KAAK,GAAG,IAAI,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC;AAC/D,CAAC;AAGD,mFAAmF;AACnF,SAAS,YAAY,CAAC,WAAoB;IACxC,OAAO;QACL,IAAI,EAAE,eAAe;QACrB,QAAQ,EAAE,SAAS;QACnB,OAAO,EACL,oFAAoF;YACpF,uDAAuD;QACzD,IAAI,EAAE,WAAW;YACf,CAAC,CAAC,iFAAiF;gBACjF,qDAAqD;YACvD,CAAC,CAAC,mEAAmE;KACxE,CAAC;AACJ,CAAC;AAED,KAAK,UAAU,aAAa,CAC1B,SAAiB,EACjB,SAAiB,EACjB,IAAa,EACb,IAAoB,EACpB,OAA+B,EAC/B,eAAuB;AACvB,uFAAuF;AACvF,QAAuB;IAEvB,MAAM,EAAE,MAAM,EAAE,GAAG,IAAI,CAAC;IAExB;;;;;;;;;;;;;;MAcE;IACF,MAAM,QAAQ,GAAG;QACf,IAAI,EAAE,EAAE,IAAI,EAAE,SAAS,EAAE,OAAO,EAAE,YAAY,EAAE;QAChD,MAAM,EAAE;YACN,IAAI,EAAE,IAAI,CAAC,OAAO,CAAC,SAAS,CAAC;YAC7B,KAAK,EAAE,IAAI,CAAC,QAAQ;YACpB,QAAQ,EAAE,IAAI,IAAI,CAAC,IAAI,CAAC,gBAAgB,CAAC,CAAC,WAAW,EAAE;YACvD,MAAM,EAAE,QAAQ;SACjB;QACD,SAAS,EAAE;YACT,MAAM,EAAE,cAAc,CAAC,MAAM,CAAC;YAC9B,OAAO,EAAE,MAAM,CAAC,OAAO;YACvB,UAAU,EAAE,MAAM,CAAC,SAAS;YAC5B,YAAY,EAAE,MAAM,CAAC,WAAW;YAChC,6EAA6E;YAC7E,oBAAoB,EAAE,eAAe,CAAC,MAAM,CAAC,aAAa,CAAC;YAC3D,cAAc,EAAE,MAAM,CAAC,YAAY;YACnC,cAAc,EAAE,MAAM,CAAC,YAAY;YACnC,YAAY,EAAE,IAAI,CAAC,WAAW;YAC9B,qBAAqB,EAAE,MAAM,CAAC,mBAAmB;YACjD,uBAAuB,EAAE,MAAM,CAAC,cAAc;YAC9C,gBAAgB,EAAE,IAAI,CAAC,eAAe;YACtC,YAAY,EAAE,MAAM,CAAC,WAAW;YAChC,mBAAmB,EAAE,IAAI,CAAC,iBAAiB,CAAC,MAAM;SACnD;QACD,UAAU,EAAE;YACV,YAAY,EAAE,IAAI,IAAI,EAAE,CAAC,WAAW,EAAE;YACtC,aAAa,EAAE,IAAI,CAAC,KAAK,CAAC,YAAY;YACtC,WAAW,EAAE,IAAI,CAAC,KAAK,CAAC,UAAU;YAClC,eAAe,EAAE,IAAI,CAAC,KAAK,CAAC,gBAAgB;YAC5C,iBAAiB,EAAE,CAAC,IAAI,CAAC,KAAK,CAAC,WAAW,EAAE,IAAI,CAAC,KAAK,CAAC,SAAS,CAAC;YACjE,mBAAmB,EAAE,eAAe;YACpC;;;;;;;;;;cAUE;YACF,MAAM,EAAE,IAAI,CAAC,MAAM;YACnB,KAAK,EAAE,OAAO,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,EAAE,IAAI,EAAE,CAAC,CAAC,IAAI,EAAE,IAAI,EAAE,CAAC,CAAC,IAAI,EAAE,CAAC,CAAC;YAC3D,WAAW,EAAE,IAAI,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;gBACnC,IAAI,EAAE,CAAC,CAAC,QAAQ;gBAChB,gBAAgB,EAAE,CAAC,CAAC,IAAI;gBACxB,QAAQ,EAAE,CAAC,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC;gBACzC,QAAQ,EAAE,CAAC,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,QAAQ,CAAC;aAC5C,CAAC,CAAC;SACJ;QACD,KAAK,EAAE,CAAC,GAAG,sBAAsB,CAAC,IAAI,CAAC,WAAW,CAAC,EAAE,GAAG,IAAI,CAAC,WAAW,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;YACpF,IAAI,EAAE,CAAC,CAAC,IAAI;YACZ,QAAQ,EAAE,CAAC,CAAC,QAAQ;YACpB,OAAO,EAAE,CAAC,CAAC,OAAO;SACnB,CAAC,CAAC;KACJ,CAAC;IAEF,MAAM,eAAe,CAAC,SAAS,EAAE,eAAe,EAAE,IAAI,CAAC,SAAS,CAAC,QAAQ,EAAE,IAAI,EAAE,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC;AAC9F,CAAC","sourcesContent":["/**\n * Executing a conversion.\n *\n * Everything is written in a single pass over the data records. All rate groups are\n * open at once and fed from the same batch of bytes, so a file is read once no\n * matter how many output tables it produces, and memory stays flat.\n */\n\nimport { createWriteStream, fstatSync } from 'node:fs';\nimport { mkdir, readdir, stat, writeFile } from 'node:fs/promises';\nimport { createHash } from 'node:crypto';\nimport { createReadStream } from 'node:fs';\nimport { finished, pipeline } from 'node:stream/promises';\nimport type { Writable } from 'node:stream';\nimport { createGzip, gzipSync } from 'node:zlib';\nimport path from 'node:path';\n\nimport type { RecordBatch } from '../edf/reader.js';\nimport { EdfFile } from '../edf/reader.js';\nimport { describeFormat, formatRates, formatWallClock } from '../edf/header.js';\nimport type { Diagnostic } from '../edf/errors.js';\nimport { EdfError } from '../edf/errors.js';\nimport type { Annotation } from '../edf/annotations.js';\nimport {\n  BufferedLineWriter,\n  DEFAULT_FLUSH_THRESHOLD,\n  UTF8_BOM,\n  csvRow,\n  escapeCsvField,\n} from '../format/csv.js';\nimport { listed } from '../format/list.js';\nimport {\n  fixed,\n  makeSampleFormatter,\n  makeTimeFormatter,\n  newOffsetBudget,\n  newSampleCacheBudget,\n} from '../format/number.js';\nimport type { SampleFormatter } from '../format/number.js';\nimport { buildPlan, withoutFileRateWarning } from './plan.js';\nimport type { ConversionPlan, PlanOptions, RateGroup } from './plan.js';\nimport { deriveRecordStarts } from './timing.js';\nimport { sampleTimeIsInRange, toleranceFor } from './time-range.js';\nimport { VERSION as TOOL_VERSION } from '../version.js';\n\nexport { TOOL_VERSION };\n\nexport type ConversionErrorCode =\n  | 'OUTPUT_EXISTS'\n  | 'OUTPUT_UNWRITABLE'\n  | 'INPUT_OUTPUT_COLLISION'\n  | 'INPUT_UNREADABLE'\n  | 'UNSUPPORTED_REQUEST'\n  | 'CALLBACK_FAILED'\n  | 'WRITE_FAILED';\n\n/**\n * Codes that mean the command cannot be carried out as written, rather than that something\n * about the file or the destination went wrong.\n *\n * The distinction is the one the exit codes draw: 1 is \"the file or the destination is the\n * problem\", 2 is \"the command line is the problem\". A caller with a `--stdout` conflict is\n * being told to change the flags — the hints say exactly that — so filing it under 1 sent\n * scripts looking at the disk. Exit 2 already covers checks that need the header first,\n * such as a `--channels` term matching nothing.\n */\nexport const USAGE_ERROR_CODES: ReadonlySet<ConversionErrorCode> = new Set(['UNSUPPORTED_REQUEST']);\n\nexport class ConversionError extends Error {\n  readonly code: ConversionErrorCode;\n  readonly hint: string | undefined;\n  constructor(code: ConversionErrorCode, message: string, hint?: string, options?: ErrorOptions) {\n    super(message, options);\n    this.name = 'ConversionError';\n    this.code = code;\n    this.hint = hint;\n  }\n}\n\nexport interface ConvertOptions extends PlanOptions {\n  /** Destination directory. Defaults to the input file's name without its extension. */\n  outputDir?: string | undefined;\n  /** Overwrite an existing output directory. */\n  force?: boolean | undefined;\n  /** Record a SHA-256 of the input in metadata.json. Costs one extra read of the file. */\n  checksum?: boolean | undefined;\n  /**\n   * Write the signal CSV to stdout instead of to a directory.\n   *\n   * Only valid when the conversion produces exactly one signal file. In the default wide\n   * layout a mixed-rate recording becomes several tables, and merging them into one stream\n   * would mean inventing the samples this tool exists not to invent; `layout: 'long'` gives\n   * one table for any recording, so it lifts the restriction. No sidecar files are written.\n   */\n  toStdout?: boolean | undefined;\n  onProgress?: ((progress: ConversionProgress) => void) | undefined;\n}\n\nexport interface ConversionProgress {\n  recordsDone: number;\n  recordsTotal: number;\n  bytesWritten: number;\n}\n\nexport interface WrittenFile {\n  name: string;\n  rows: number;\n}\n\nexport interface ConvertResult {\n  outputDir: string;\n  files: WrittenFile[];\n  /**\n   * True when a `--stdout` reader closed the pipe before the conversion finished.\n   *\n   * `edf2csv rec.edf --stdout | head -1` is an ordinary thing to type and not a failure, but\n   * it is also not a conversion: the row count is rows formatted before the close was\n   * noticed, which is neither the recording's total nor what the reader received.\n   */\n  readerHungUp: boolean;\n  annotationCount: number;\n  diagnostics: Diagnostic[];\n  plan: ConversionPlan;\n  file: EdfFile;\n  elapsedMs: number;\n}\n\ninterface OpenGroup {\n  group: RateGroup;\n  writer: BufferedLineWriter;\n  formatters: SampleFormatter[];\n  formatTime: (recordStart: number, sample: number) => string;\n  rows: number;\n  /** Resolves once a compressed stream's bytes have reached the file behind it. */\n  settled: Promise<void>;\n  /** Detaches the compressor's error forwarding from a stream this tool does not own. */\n  release: () => void;\n}\n\nexport async function convert(inputPath: string, options: ConvertOptions = {}): Promise<ConvertResult> {\n  const startedAt = Date.now();\n  const file = await EdfFile.open(inputPath);\n\n  try {\n    /*\n      Hashed before a record is read, and only published if the file held still.\n\n      A checksum taken afterwards cannot be trusted whichever descriptor it goes through. A\n      file overwritten in place keeps its inode, so the open handle sees the new bytes too,\n      and the old ones are simply gone — there is nowhere left to read what was converted.\n      Taking it first at least means the hash describes the file the header was read from.\n\n      What makes it a guarantee rather than a hope is the check at the end: if size or\n      modification time moved at any point, the hash is dropped and the run says why. So\n      `sha256` present means the file demonstrably did not change while it was read, and a\n      recording still being written gets a null and a warning instead of a plausible hash of\n      the wrong bytes. (A change reverted within the same modification timestamp would slip\n      through; nothing short of copying the input first can close that.)\n    */\n    const checksumAtOpen = options.checksum === true ? await file.sha256() : null;\n\n    // One pass over the annotation channel supplies everything annotation-related:\n    // where each record sits in time, and the full event list. It reads the whole\n    // file even when a window was requested, because an annotation inside the window\n    // may be stored in a record outside it.\n    const annotationData =\n      file.annotationSignals.length > 0\n        ? await file.readAnnotations()\n        : { annotations: [] as Annotation[], recordStarts: [] as (number | null)[], malformed: 0 };\n\n    const timing = deriveRecordStarts(file, annotationData);\n\n    const plan = buildPlan(\n      {\n        signals: file.header.signals,\n        recordDuration: file.header.recordDuration,\n        recordCount: file.recordCount,\n        hasAnnotationChannel: file.annotationSignals.length > 0,\n        recordStarts: timing.starts,\n      },\n      options,\n    );\n    plan.diagnostics.push(...timing.diagnostics);\n\n    if (options.toStdout === true) {\n      if (!plan.writeSignals) {\n        throw new ConversionError(\n          'UNSUPPORTED_REQUEST',\n          '--stdout has no signal data to write because --annotations-only was given.',\n          'Drop one of the two flags.',\n        );\n      }\n      /*\n        No table at all is its own answer, and neither layout gave it.\n\n        A recording with no signal channels — one holding only EDF+ annotations — produced\n        zero rate groups. The wide layout then said \"--stdout needs exactly one table, but\n        this recording produces 0, one for each sampling rate its channels use ()\", with an\n        empty parenthetical, advice to narrow to one of no rates, and advice to use\n        `--layout long` — which wrote zero bytes to stdout, not even a header row, and exited\n        0 while warning that \"the signal files hold their headers and no data\". There were no\n        files and there was no header. The one path that was right about this is\n        `--annotations-only`, which refuses outright, and this is the same situation reached\n        by a different route.\n      */\n      if (plan.groups.length === 0) {\n        throw new ConversionError(\n          'UNSUPPORTED_REQUEST',\n          file.dataSignals.length === 0\n            ? '--stdout has no signal data to write: this recording has no signal channels, ' +\n              'only EDF+ annotations.'\n            : '--stdout has no signal data to write: nothing was selected that carries samples.',\n          file.dataSignals.length === 0\n            ? 'Convert to a directory to get its annotations.csv, or drop --stdout.'\n            : 'Check --channels and the requested window, or convert to a directory instead.',\n        );\n      }\n\n      // The long layout is one table whatever the rates are, so it has nothing to refuse.\n      if (plan.layout !== 'long' && plan.groups.length !== 1) {\n        throw new ConversionError(\n          'UNSUPPORTED_REQUEST',\n          // Naming the rates is the point: the hint says to narrow the selection, and this\n          // is what there is to narrow it to. The parenthetical used to repeat the count\n          // that had just been given — \"produces 3 (its channels use 3 different sampling\n          // rates)\" — which told nobody anything they could act on.\n          `--stdout needs exactly one table, but this recording produces ${plan.groups.length}, ` +\n            `one for each sampling rate its channels use ` +\n            `(${listed(formatRates(plan.groups.map((g) => g.rate)).map((r) => `${r} Hz`))}).`,\n          'Narrow it to one rate with --channels, write --layout long to get them all in ' +\n            'one table, or convert to a directory instead.',\n        );\n      }\n      let readerHungUp = false;\n      const written = await writeSignalFiles(file, plan, null, timing.starts, options, (hungUp) => {\n        readerHungUp = hungUp;\n      });\n      if (await file.changedSinceOpen()) plan.diagnostics.push(inputChanged(false));\n      return {\n        outputDir: '-',\n        files: written,\n        readerHungUp,\n        annotationCount: 0,\n        diagnostics: [...withoutFileRateWarning(file.diagnostics), ...plan.diagnostics],\n        plan,\n        file,\n        elapsedMs: Date.now() - startedAt,\n      };\n    }\n\n    const outputDir = options.outputDir ?? defaultOutputDir(inputPath);\n    await assertInputDoesNotOverlapOutputs(inputPath, outputDir, file, plan, options);\n    await prepareOutputDir(outputDir, options.force === true);\n\n    const written: WrittenFile[] = [];\n\n    if (plan.writeSignals && plan.groups.length > 0) {\n      const signals = await writeSignalFiles(file, plan, outputDir, timing.starts, options);\n      written.push(...signals);\n    } else if (plan.writeSignals) {\n      /*\n        Asked for signal data and given none to write.\n\n        Every channel selected carries zero samples per record, so there is no table to make\n        — `edf2csv rec.edf --channels unused` writes channels.csv and metadata.json and no\n        signals.csv at all. The NO_SAMPLES warning explains the channel; nothing explained the\n        missing file, and the documentation says signals.csv is written unless\n        --annotations-only was passed. Someone looking for it should be told where it went.\n\n        There are two ways to arrive with no groups, and the wording above is only true of\n        one of them. A recording that holds nothing but EDF+ annotations has no channel that\n        could have been selected, its channels.csv is a header row and nothing else, and no\n        channel of it carries samples — so \"every channel selected\", \"channels.csv still\n        describes them\" and \"which channels do carry samples\" were three false statements in\n        one warning, printed under a warning that had just said the file has no signal\n        channels. `--stdout` distinguishes the two cases a few lines up and `--info` prints\n        one accurate line; this path was the only one that did not.\n      */\n      const noChannelsAtAll = file.dataSignals.length === 0;\n      plan.diagnostics.push({\n        code: 'NO_SAMPLES',\n        severity: 'warning',\n        message: noChannelsAtAll\n          ? 'No signal file was written: there is no signal data in this recording to put in ' +\n            'one.'\n          : 'No signal file was written: every channel selected carries zero samples per data ' +\n            'record, so there is nothing to put in one.',\n        hint: noChannelsAtAll\n          ? 'annotations.csv holds whatever events it carries. channels.csv lists signal ' +\n            'channels, so it has none to list.'\n          : 'channels.csv still describes them. Run with --info to see which channels do carry ' +\n            'samples.',\n      });\n    }\n\n    if (options.annotationsOnly === true && file.annotationSignals.length === 0) {\n      plan.diagnostics.push({\n        code: 'NO_ANNOTATIONS',\n        severity: 'warning',\n        message:\n          '--annotations-only was requested but this recording has no annotation channel, ' +\n          'so there are no events to export.',\n        hint: 'Plain EDF files carry no annotations. Convert without --annotations-only to get the signals.',\n      });\n    }\n\n    let annotationsWritten = 0;\n    if (file.annotationSignals.length > 0) {\n      const result = await writeAnnotationsCsv(\n        outputDir,\n        annotationData.annotations,\n        requestedAnnotationWindow(options, plan.range.recordingStartSeconds),\n        options.gzip === true,\n        options.bom === true,\n      );\n      written.push(result);\n      annotationsWritten = result.rows;\n    }\n\n    written.push(\n      await writeChannelsCsv(outputDir, file, plan, options.gzip === true, options.bom === true),\n    );\n\n    /*\n      The file moved under the conversion. Said out loud, because nothing else shows it.\n\n      The CSVs are still correct for the records that were read, and metadata.json still\n      describes the file as it was opened — so the record is consistent with the output\n      whatever happens here. What stops being true is that the checksum describes the bytes\n      that were converted, since an in-place overwrite leaves nowhere to read them from. It\n      is dropped rather than guessed at.\n    */\n    const changed = await file.changedSinceOpen();\n    if (changed) plan.diagnostics.push(inputChanged(options.checksum === true));\n\n    await writeMetadata(\n      outputDir,\n      inputPath,\n      file,\n      plan,\n      written,\n      annotationsWritten,\n      changed ? null : checksumAtOpen,\n    );\n\n    const stale = await findStaleOutput(outputDir, written);\n\n    return {\n      outputDir,\n      files: written,\n      readerHungUp: false,\n      annotationCount: annotationsWritten,\n      diagnostics: [...withoutFileRateWarning(file.diagnostics), ...plan.diagnostics, ...stale],\n      plan,\n      file,\n      elapsedMs: Date.now() - startedAt,\n    };\n  } finally {\n    await file.close();\n  }\n}\n\n/*\n  Files this tool produces, used to spot leftovers from an earlier conversion.\n\n  The rate part has to allow every shape a filename can now take, not just the plain ones:\n\n    signals_256hz.csv         an integer rate\n    signals_12_5hz.csv        a fractional rate, decimal point written as an underscore\n    signals_1_000e-7hz.csv    a rate small enough to need exponent form  (0.2.2)\n    signals_256hz.csv.gz      any of the above, compressed                (0.3.0)\n    signals_0hz_2.csv         a second group whose rate slug collided    (0.2.1)\n\n  The previous `[\\w.]+hz` matched neither of the last two — `-` and `+` are not word\n  characters, and the collision suffix falls after the `hz`. Both were introduced by\n  recent changes and both silently stopped being recognised as this tool's own output, so\n  leftovers of exactly those kinds went unreported: the one situation the warning exists\n  for. Requiring a digit after the underscore keeps a user's own `signals_notes.csv` out.\n*/\nconst OUTPUT_PATTERN =\n  /^(signals(_\\d[\\w.+-]*hz(_\\d+)?)?\\.csv(\\.gz)?|annotations\\.csv(\\.gz)?|channels\\.csv(\\.gz)?|metadata\\.json)$/u;\n\n/**\n * Detect output from a previous run that this one did not replace.\n *\n * `--force` overwrites files but does not empty the directory, so converting a\n * mixed-rate recording and then a single-rate one into the same place leaves\n * `signals_256hz.csv` sitting next to a fresh `signals.csv`. Both look current.\n * Nothing is deleted here — the user is told, and decides.\n */\nasync function findStaleOutput(\n  outputDir: string,\n  written: readonly WrittenFile[],\n): Promise<Diagnostic[]> {\n  const entries = await readdir(outputDir).catch(() => null);\n  if (!entries) return [];\n\n  // metadata.json is rewritten on every run but is not part of the reported file list.\n  const fresh = new Set([...written.map((f) => f.name), 'metadata.json']);\n  const stale = entries.filter((name) => OUTPUT_PATTERN.test(name) && !fresh.has(name)).sort();\n  if (stale.length === 0) return [];\n\n  return [\n    {\n      code: 'STALE_OUTPUT',\n      severity: 'warning',\n      /*\n        Through `listed`, like every other message that enumerates something this run does not\n        control. How many stale files a directory holds is up to the directory, and a\n        mixed-rate recording converted into a reused one is exactly how it fills up: 120 old\n        `signals_<rate>hz.csv` files produced a single 2,373-character warning line. That is\n        the failure `listed` was written for — its own comment quotes the 1,600-character\n        version of it — and this was the one message still joining its own list.\n\n        The hint said \"Delete them\" whatever the count, so one stale file read \"signals_999hz\n        .csv is left over ... Delete them.\"\n      */\n      message:\n        `${listed(stale)} ${stale.length === 1 ? 'is' : 'are'} left over from an earlier ` +\n        `conversion into this directory and ${stale.length === 1 ? 'was' : 'were'} not rewritten.`,\n      hint:\n        `Delete ${stale.length === 1 ? 'it' : 'them'}, or convert into a fresh directory, so ` +\n        'the two runs do not get mixed up.',\n    },\n  ];\n}\n\nexport function defaultOutputDir(inputPath: string): string {\n  const base = path.basename(inputPath, path.extname(inputPath));\n  return path.join(path.dirname(inputPath), `${base}_csv`);\n}\n\n/** Never let an output target resolve to the recording being read, even with --force. */\nasync function assertInputDoesNotOverlapOutputs(\n  inputPath: string,\n  outputDir: string,\n  file: EdfFile,\n  plan: ConversionPlan,\n  options: ConvertOptions,\n): Promise<void> {\n  /*\n    The names this run will actually write, compressed ones included.\n\n    The rate files come from the plan and already carry `.csv.gz` under --gzip; the sidecars\n    were spelled out here and did not. So a compressed run checked two names it would never\n    write and missed the two it would: a recording sitting at <outdir>/channels.csv.gz was\n    overwritten by its own conversion, with --force, reported as a success. The same file\n    named signals.csv.gz was refused, which is what gives the oversight away.\n  */\n  const suffix = options.gzip === true ? '.csv.gz' : '.csv';\n  const names = new Set(plan.groups.map((group) => group.fileName));\n  if (file.annotationSignals.length > 0) names.add(`annotations${suffix}`);\n  names.add(`channels${suffix}`);\n  names.add('metadata.json');\n\n  const inputResolved = path.resolve(inputPath);\n  const inputInfo = await stat(inputPath);\n\n  for (const name of names) {\n    const target = path.join(outputDir, name);\n    const targetResolved = path.resolve(target);\n    const targetInfo = await stat(target).catch(() => null);\n    const samePath = targetResolved === inputResolved;\n    const sameFile =\n      targetInfo !== null && targetInfo.dev === inputInfo.dev && targetInfo.ino === inputInfo.ino;\n    if (!samePath && !sameFile) continue;\n\n    throw new ConversionError(\n      'INPUT_OUTPUT_COLLISION',\n      `Output file \"${target}\" is the same file as the input recording.`,\n      'Choose a separate directory with --out. The input was not modified.',\n    );\n  }\n}\n\nasync function prepareOutputDir(dir: string, force: boolean): Promise<void> {\n  /*\n    Claim the directory with a single atomic mkdir rather than asking whether it exists\n    and then creating it.\n\n    Checking first left a window between the two: two conversions started together both\n    saw \"not there\", both proceeded, and both opened write streams on the same signals.csv.\n    Neither reported anything — both exited 0, having half-written one file between them.\n    A non-recursive mkdir cannot do that. Exactly one caller creates the directory; every\n    other one gets EEXIST from the filesystem and takes the already-exists path below.\n\n    Parents are still created recursively, since --out ./a/b/c should work. Only the final\n    component is the claim.\n  */\n  const parent = path.dirname(dir);\n  if (parent && parent !== dir) {\n    try {\n      await mkdir(parent, { recursive: true });\n    } catch (cause: unknown) {\n      // A parent that is a regular file surfaces as EEXIST naming the parent, which reads\n      // as though the destination already exists rather than as \"you cannot put a\n      // directory inside a file\". Name the real obstacle instead of the errno.\n      const info = await stat(parent).catch(() => null);\n      if (info && !info.isDirectory()) {\n        throw new ConversionError(\n          'OUTPUT_UNWRITABLE',\n          `Cannot create \"${dir}\": \"${parent}\" is a file, not a directory.`,\n          'Choose a destination whose parent directories are directories, with --out.',\n        );\n      }\n      throw new ConversionError(\n        'OUTPUT_UNWRITABLE',\n        `Cannot create \"${dir}\": ${describeFsError(cause)}.`,\n        'Check the path exists and that you have permission to write there.',\n      );\n    }\n  }\n\n  let claimed = true;\n  try {\n    await mkdir(dir);\n  } catch (cause: unknown) {\n    if ((cause as NodeJS.ErrnoException).code !== 'EEXIST') {\n      throw new ConversionError(\n        'OUTPUT_UNWRITABLE',\n        `Cannot create \"${dir}\": ${describeFsError(cause)}.`,\n        'Check the path exists and that you have permission to write there.',\n      );\n    }\n    claimed = false;\n  }\n\n  if (!claimed) {\n    const existing = await stat(dir).catch(() => null);\n\n    // --force means \"replace my previous output\", not \"write output files into\n    // whatever this happens to be\". Pointing it at a regular file needs saying so.\n    if (existing && !existing.isDirectory()) {\n      throw new ConversionError(\n        'OUTPUT_UNWRITABLE',\n        `\"${dir}\" is a file, but the converted data needs a directory.`,\n        'Choose a directory with --out.',\n      );\n    }\n    if (!force) {\n      throw new ConversionError(\n        'OUTPUT_EXISTS',\n        `\"${dir}\" already exists.`,\n        'Pass --force to overwrite it, or --out to choose a different directory.',\n      );\n    }\n  }\n}\n\n/** Turn a Node filesystem error into something a person can act on. */\nfunction describeFsError(cause: unknown): string {\n  const code = (cause as NodeJS.ErrnoException | undefined)?.code;\n  if (code === 'EACCES' || code === 'EPERM') return 'permission denied';\n  if (code === 'ENOSPC') return 'the disk is full';\n  if (code === 'ENOTDIR') return 'part of the path is a file, not a directory';\n  if (code === 'EROFS') return 'the filesystem is read-only';\n  if (code === 'ENAMETOOLONG') return 'the path is too long';\n  return cause instanceof Error ? cause.message : String(cause);\n}\n\nasync function writeSignalFiles(\n  file: EdfFile,\n  plan: ConversionPlan,\n  outputDir: string | null,\n  recordStarts: Float64Array | null,\n  options: ConvertOptions,\n  onHangUp?: (hungUp: boolean) => void,\n): Promise<WrittenFile[]> {\n  // One budget for every table in this conversion, not one per table: see OffsetBudget.\n  const offsets = newOffsetBudget();\n  // Likewise one for every channel, not one per channel: see SampleCacheBudget.\n  const sampleCaches = newSampleCacheBudget();\n  // Only the stdout path needs this; --out finds a full disk on its own, because it always\n  // has another file to write afterwards. See auditStdout.\n  const audit = outputDir === null ? auditStdout() : null;\n  /*\n    In the long layout every group writes into one table, so they share one stream. Opening\n    a stream per group on the same path is what the rate-slug collision fix in groupByRate\n    was about: two writers on one file interleave rows under a header naming one of them.\n  */\n  let shared: {\n    stream: Writable;\n    settled: Promise<void>;\n    release: () => void;\n    target: Writable;\n    writer: BufferedLineWriter;\n  } | null = null;\n\n  /*\n    One buffer's worth of memory for the conversion, not one per table.\n\n    Every group had its own writer at the default 1 MiB threshold, so pending output was\n    group count × 1 MiB before anything drained. A 6.5 MB recording with 40 sampling rates\n    — the header allows thousands of channels, and a research montage really does mix a\n    dozen rates — died with a raw V8 heap out-of-memory and exit 134 under a 96 MB cap,\n    while the site advertises 48 MB. The recording is small; it is the fan-out that is not.\n\n    Split evenly with a floor, so the single-rate case, which is nearly every recording,\n    keeps exactly the buffer it always had, and forty tables cost 2.5 MB rather than 40.\n    The long layout shares one writer already and is unaffected either way.\n  */\n  const MIN_FLUSH_THRESHOLD = 8 * 1024;\n  const flushThreshold = Math.max(\n    MIN_FLUSH_THRESHOLD,\n    Math.floor(DEFAULT_FLUSH_THRESHOLD / Math.max(1, plan.groups.length)),\n  );\n  /*\n    The stream's own buffer is the other half of the same sum.\n\n    0.5.6 shared the line-buffer budget and left `createWriteStream` at its 64 KiB default,\n    which is per stream: 200 rate groups meant 12.8 MB of stream buffer on top of 12.8 MB of\n    line buffer, and an 855 KB recording still died at a 48 MB cap. Shared the same way, with\n    a floor that keeps an ordinary conversion writing in useful-sized pieces.\n  */\n  const streamBuffer = Math.max(\n    16 * 1024,\n    Math.floor(DEFAULT_FLUSH_THRESHOLD / Math.max(1, plan.groups.length)),\n  );\n\n  const open: OpenGroup[] = plan.groups.map((group, groupIndex) => {\n    // A null directory means the single table goes to stdout. process.stdout is already a\n    // writable stream, so the same buffered writer and backpressure handling apply.\n    const target =\n      shared?.target ??\n      (outputDir === null\n        ? process.stdout\n        : createWriteStream(path.join(outputDir, group.fileName), {\n            highWaterMark: streamBuffer,\n          }));\n    const { stream, settled, release } = shared ?? compressed(target, options.gzip === true);\n    /*\n      Under --gzip the writer feeds the compressor, so its byte count is the CSV before\n      compression and says nothing about what reached the descriptor. The compressor's own\n      output is what stdout is handed, so that is what is counted. `pipe` uses a 'data'\n      listener of its own and a second one is delivered the same chunks.\n\n      Once per stream, which in the long layout is once for all the groups. Attaching per\n      group put N listeners on the one shared compressor, so every chunk was counted N\n      times: `--stdout --layout long --gzip` on a 40-rate recording claimed 622,240 of\n      622,240 bytes where 15,556 had been written, failed with a disk-full error over a\n      perfectly good file, and printed Node's MaxListenersExceededWarning to stderr on the\n      way past ten. 0.5.4 fixed the same arithmetic in the uncompressed branch and left\n      this one, because the uncompressed branch is where the count is a sum and this one is\n      where it is a subscription.\n    */\n    if (audit && stream !== target && !shared) {\n      stream.on('data', (chunk: Buffer) => audit.count(chunk.length));\n    }\n    /*\n      One writer, not one per group, when the table is shared. Separate writers over one\n      stream each hold their own buffer and flush on their own schedule, so the rows would\n      reach the file in whatever order the buffers filled — which is not the order they\n      were produced in, and the long layout's whole claim is that its rows are in time\n      order.\n    */\n    const writer = shared?.writer ?? new BufferedLineWriter(stream, flushThreshold);\n    if (plan.layout === 'long' && !shared) shared = { stream, settled, release, target, writer };\n\n    // Only the first group writes the header of a shared table, and the mark before it.\n    if (plan.layout !== 'long' || groupIndex === 0) {\n      if (options.bom === true) writer.push(UTF8_BOM);\n      writer.pushLine(\n        plan.layout === 'long'\n          ? csvRow(['time_s', 'channel', 'value'])\n          : csvRow(['time_s', ...group.channels.map((c) => c.column)]),\n      );\n    }\n    return {\n      group,\n      writer,\n      formatters: group.channels.map((c) => makeSampleFormatter(c.signal, c.decimals, sampleCaches)),\n      formatTime: makeTimeFormatter(\n        group.samplesPerRecord,\n        group.rate,\n        group.timeDecimals,\n        offsets,\n      ),\n      rows: 0,\n      settled,\n      release,\n    };\n  });\n\n  try {\n    const written = await streamSignalRows(file, plan, open, recordStarts, options);\n\n    /*\n      Checked once everything has been flushed and ended, and not when the reader hung up.\n\n      `--stdout | head -1` closes the pipe on purpose, which is a shell idiom rather than a\n      failure. A pipe is not a regular file, so auditStdout declines it anyway — the second\n      guard is here because the cost of getting this one wrong is reporting a failure for a\n      command that worked.\n    */\n    if (audit) {\n      // Uncompressed, the writer hands its bytes straight to the descriptor; compressed,\n      // they were counted on the compressor's way out.\n      if (options.gzip !== true) {\n        /*\n          Once per writer, not once per group. The long layout gives every group the same\n          writer, so counting per group multiplied its byte total by the number of rates:\n          `--stdout --layout long` on a three-rate recording handed over 32,043 bytes, was\n          credited with 96,129, and failed with a disk-full error for a file that was\n          complete on disk. It only showed with stdout redirected to a regular file, since\n          that is the one case the audit applies to — which is the command the --layout\n          documentation gives.\n        */\n        for (const writer of new Set(open.map((entry) => entry.writer))) {\n          audit.count(writer.bytesOut);\n        }\n      }\n      if (!open.some((entry) => entry.writer.hungUp)) audit.verify();\n    }\n    onHangUp?.(open.some((entry) => entry.writer.hungUp));\n    return written;\n  } catch (cause) {\n    for (const entry of open) entry.writer.destroy();\n\n    /*\n      Reading and writing both fail through here, and both were reported as writing.\n\n      A recording that shrinks mid-conversion — still being written by the acquisition\n      software, say — raises the reader's own error, which names the record and says the\n      file changed size while it was being read. That precise diagnosis was then filed under\n      `Writing to \"<dir>\" failed` and given the hint about freeing disk space, which sends\n      someone to look at the one part of the system that was working.\n\n      The reader's message and its advice are kept; only the note about partial output is\n      added, since that much is true of either failure.\n    */\n    // A ConversionError arrived already saying what went wrong — a callback that threw, say.\n    // Wrapping it again turned \"the onProgress callback threw\" into `Writing to \"out\"\n    // failed: the onProgress callback threw`, under a hint about checking the destination.\n    if (cause instanceof ConversionError) throw cause;\n\n    if (cause instanceof EdfError) {\n      const where = outputDir === null ? 'stdout' : `\"${outputDir}\"`;\n      throw new ConversionError(\n        'INPUT_UNREADABLE',\n        cause.message,\n        `${cause.hint ? `${cause.hint} ` : ''}What was written to ${where} before it failed is ` +\n          `incomplete and should not be used.`,\n      );\n    }\n\n    const detail = cause instanceof Error ? cause.message : String(cause);\n    throw new ConversionError(\n      'WRITE_FAILED',\n      `Writing to ${outputDir === null ? 'stdout' : `\"${outputDir}\"`} failed: ${detail}`,\n      writeHint(cause, outputDir === null),\n    );\n  }\n}\n\n/**\n * One record's samples in the long layout: `time_s,channel,value`, in time order.\n *\n * The groups are merged rather than written one after another. Every sample in a record\n * falls inside that record's span, so taking the earliest next sample across the groups\n * each time leaves the whole file sorted by `time_s` — which is the only thing that makes a\n * mixed-rate long table useful, since sorting 3 million rows afterwards is the reader's\n * problem and a large one.\n *\n * Ties go to the group with the higher rate, which is the order the groups are already in.\n * Within a sample time the channels come out in the order the file declares them.\n */\n/**\n * Whether two sample times are close enough that only rounding could separate them.\n *\n * A relative epsilon, because the gap between doubles grows with magnitude. Well below any\n * real sample interval — the finest a recording can declare is bounded by its record\n * duration and samples-per-record fields — and well above the one-ULP disagreement that two\n * exact divisions of the same instant produce.\n */\nfunction nearlyEqual(a: number, b: number): boolean {\n  return Math.abs(a - b) <= Math.max(Math.abs(a), Math.abs(b)) * 1e-12;\n}\n\n/** The chosen instant as it will be written, for deciding which channels share it. */\nfunction formatAt(\n  open: readonly OpenGroup[],\n  cursors: Int32Array,\n  recordStart: number,\n  earliest: number,\n): string {\n  for (let g = 0; g < open.length; g++) {\n    const entry = open[g];\n    if (!entry) continue;\n    const sample = cursors[g] ?? 0;\n    if (sample >= entry.group.samplesPerRecord) continue;\n    if (recordStart + sample / entry.group.rate === earliest) {\n      return entry.formatTime(recordStart, sample);\n    }\n  }\n  return '';\n}\n\nasync function writeLongRecord(\n  file: EdfFile,\n  open: readonly OpenGroup[],\n  batch: RecordBatch,\n  recordInBatch: number,\n  recordStart: number,\n  range: ConversionPlan['range'],\n): Promise<void> {\n  const writer = open[0]?.writer;\n  if (!writer) return;\n\n  const cursors = new Int32Array(open.length);\n  /* Reused across sample times so a three-million-row conversion allocates one of these. */\n  const due: { entry: OpenGroup; groupIndex: number; sample: number; channel: number }[] = [];\n\n  for (;;) {\n    let earliest = Infinity;\n    for (let g = 0; g < open.length; g++) {\n      const entry = open[g];\n      if (!entry) continue;\n      const sample = cursors[g] ?? 0;\n      if (sample >= entry.group.samplesPerRecord) continue;\n      const time = recordStart + sample / entry.group.rate;\n      if (time < earliest) earliest = time;\n    }\n    if (earliest === Infinity) return;\n\n    /*\n      Everything at this instant, in the order the file declares its channels.\n\n      Groups are ordered by rate, largest first, because that is how the wide layout names\n      its files. Emitting a tie group by group therefore ordered the channels by descending\n      sampling rate — so a recording declaring `slow, medium, fast` wrote `fast, medium,\n      slow`, while the documentation promised file order and channels.csv listed file order.\n      Signal index is the file's own order, and the only one a reader can predict.\n\n      \"At this instant\" is decided on the time as written, not on the double. `s / rate` for\n      two channels at one moment need not give the same double: a 0.3 s record holding 12 and\n      4 samples makes 40 Hz and 13.333… Hz, and 9/40 is 0.22500000000000000555 while 3/13.333…\n      is 0.22499999999999997780. Equality missed that, so those two rows fell out in numeric\n      order — `slow` before `fast`, once, in the middle of a file that was otherwise right.\n\n      Two rows are at one time exactly when they carry the same `time_s`, which is the only\n      definition a reader of the CSV can apply. The numeric pre-filter keeps the common case\n      to one comparison; formatting happens only for candidates already within a hair.\n    */\n    const earliestText = formatAt(open, cursors, recordStart, earliest);\n    due.length = 0;\n    for (let g = 0; g < open.length; g++) {\n      const entry = open[g];\n      if (!entry) continue;\n      const sample = cursors[g] ?? 0;\n      if (sample >= entry.group.samplesPerRecord) continue;\n      const time = recordStart + sample / entry.group.rate;\n      if (time !== earliest) {\n        // Far away in the ordinary case; only a near-tie is worth formatting.\n        if (!nearlyEqual(time, earliest)) continue;\n        if (entry.formatTime(recordStart, sample) !== earliestText) continue;\n      }\n      cursors[g] = sample + 1;\n      // Same window rule as the wide layout, with the same per-rate slack.\n      if (\n        !sampleTimeIsInRange(earliest, range.startSeconds, range.endSeconds, toleranceFor(entry.group.rate))\n      ) {\n        continue;\n      }\n      for (let c = 0; c < entry.group.channels.length; c++) {\n        due.push({ entry, groupIndex: g, sample, channel: c });\n      }\n    }\n    if (due.length === 0) continue;\n    if (due.length > 1) {\n      due.sort(\n        (a, b) =>\n          (a.entry.group.channels[a.channel]?.signal.index ?? 0) -\n          (b.entry.group.channels[b.channel]?.signal.index ?? 0),\n      );\n    }\n\n    for (const item of due) {\n      const channel = item.entry.group.channels[item.channel];\n      const format = item.entry.formatters[item.channel];\n      if (!channel || !format) continue;\n      if (writer.hungUp) return;\n      writer.pushLine(\n        `${item.entry.formatTime(recordStart, item.sample)},${escapeCsvField(channel.column)},` +\n          `${format(file.sampleAt(batch, recordInBatch, channel.signal, item.sample))}`,\n      );\n      item.entry.rows++;\n      // Flushed inside the record for the same reason the wide layout is; see there.\n      if (writer.full) await writer.flush();\n    }\n  }\n}\n\nasync function streamSignalRows(\n  file: EdfFile,\n  plan: ConversionPlan,\n  open: OpenGroup[],\n  recordStarts: Float64Array | null,\n  options: ConvertOptions,\n): Promise<WrittenFile[]> {\n  const { startSeconds, endSeconds, startRecord, endRecord } = plan.range;\n  const { recordDuration } = file.header;\n  let recordsDone = 0;\n\n  /*\n    Every destination has hung up, so nothing formatted from here on could reach anyone.\n    `--stdout | head -1` is the usual way to arrive here: the reader takes one line and\n    closes the pipe while the conversion is still near the start of the recording.\n\n    Stopping also makes the reported row count mean what it says — rows that reached the\n    consumer, rather than rows the loop went on formatting into a discarded buffer.\n  */\n  const allHungUp = (): boolean => open.length > 0 && open.every((entry) => entry.writer.hungUp);\n\n  for await (const batch of file.readRecords({ startRecord, endRecord })) {\n    if (allHungUp()) break;\n    for (let r = 0; r < batch.recordCount; r++) {\n      if (allHungUp()) break;\n      const index = batch.firstRecordIndex + r;\n      const recordStart = recordStarts ? (recordStarts[index] ?? index * recordDuration) : index * recordDuration;\n\n      if (plan.layout === 'long') {\n        await writeLongRecord(file, open, batch, r, recordStart, plan.range);\n        recordsDone++;\n        continue;\n      }\n\n      for (const entry of open) {\n        const { group, writer, formatters, formatTime } = entry;\n        const { channels, rate } = group;\n        // Slack that never reaches the next sample; see toleranceFor.\n        const slack = toleranceFor(rate);\n\n        for (let sample = 0; sample < group.samplesPerRecord; sample++) {\n          const time = recordStart + sample / rate;\n          if (!sampleTimeIsInRange(time, startSeconds, endSeconds, slack)) continue;\n\n          let row = formatTime(recordStart, sample);\n          for (let c = 0; c < channels.length; c++) {\n            const channel = channels[c];\n            const format = formatters[c];\n            if (!channel || !format) continue;\n            row += ',' + format(file.sampleAt(batch, r, channel.signal, sample));\n          }\n          if (writer.hungUp) break;\n          writer.pushLine(row);\n          entry.rows++;\n\n          /*\n            Flushed inside the record, not only at the end of one.\n\n            The buffer was drained once per record, so the rows of a single record piled up\n            with nothing emptying them — memory followed samples-per-record rather than the\n            batch size the writer exists to hold to. One record of 16,000,000 samples died\n            with a heap out of memory under a 256 MB cap, while the same 32 MB of samples\n            split into 16,000 records converted to the same 283 MB CSV without trouble. The\n            format allows either layout and says nothing about which to expect.\n\n            `full` is a synchronous read of the pending size, so the twenty million rows that\n            are not at a boundary cost a comparison rather than a microtask each.\n          */\n          if (writer.full) await writer.flush();\n        }\n        await writer.maybeFlush();\n      }\n\n      recordsDone++;\n    }\n\n    if (options.onProgress) {\n      /*\n        A caller's callback is the caller's, and its failures are not the destination's.\n\n        This ran inside the same try that turns a stream failure into WRITE_FAILED, so a\n        progress callback that threw came back as `Writing to \"out\" failed: caller bug`,\n        advising the reader to check a destination that was working perfectly. It is the\n        same misattribution the write hints had until 0.4.36, one layer up.\n\n        The original is kept as `cause`, so the stack that actually matters survives, and\n        the conversion still stops — the callback threw, and carrying on writing into a\n        directory whose owner has just failed is not an improvement.\n      */\n      try {\n        options.onProgress({\n          recordsDone,\n          recordsTotal: endRecord - startRecord,\n          // Once per writer: the long layout's groups share one, so summing per group\n          // reported a figure larger than the file being written.\n          bytesWritten: [...new Set(open.map((entry) => entry.writer))].reduce(\n            (sum, entry) => sum + entry.charsWritten,\n            0,\n          ),\n        });\n      } catch (cause) {\n        throw new ConversionError(\n          'CALLBACK_FAILED',\n          `The onProgress callback threw: ${cause instanceof Error ? cause.message : String(cause)}`,\n          'This is the caller\\'s callback, not the recording or the destination. Whatever was ' +\n            'written before it threw is incomplete and should not be used.',\n          { cause },\n        );\n      }\n    }\n  }\n\n  const closed = new Set<BufferedLineWriter>();\n  for (const entry of open) {\n    if (closed.has(entry.writer)) continue;\n    closed.add(entry.writer);\n    try {\n      await entry.writer.end();\n      // With --gzip the writer's stream is the compressor, whose end callback fires when the\n      // compressor is done rather than when the file behind it is. Awaiting only that would\n      // report success with the tail of the file still in flight.\n      await entry.settled;\n    } finally {\n      // In a finally for the reason 0.5.45 gives about the writer's own release: a\n      // conversion that fails here still has to leave process.stdout as it found it, and a\n      // failure is exactly when a caller goes on to convert something else.\n      entry.release();\n    }\n  }\n\n  // A shared table is one file, and its row count is every group's rows, not the first's.\n  if (plan.layout === 'long') {\n    const first = open[0];\n    if (!first) return [];\n    return [{ name: first.group.fileName, rows: open.reduce((sum, e) => sum + e.rows, 0) }];\n  }\n  return open.map((entry) => ({ name: entry.group.fileName, rows: entry.rows }));\n}\n\n/**\n * The stream rows are written to, plus a promise for the data reaching its destination.\n *\n * Compression sits between the writer and the file as a transform. Failures below it — a\n * full disk, an unwritable path — surface on the file stream, where nothing is listening,\n * so they are forwarded onto the compressor: that is the stream the writer watches, and\n * routing them there keeps one error path rather than two.\n */\nfunction compressed(\n  target: Writable,\n  gzip: boolean,\n): { stream: Writable; settled: Promise<void>; release: () => void } {\n  if (!gzip) return { stream: target, settled: Promise.resolve(), release: (): void => {} };\n  const compressor = createGzip();\n  /*\n    Removable, because one of the streams this can be handed outlives the conversion.\n\n    0.5.36 fixed exactly this leak for the writer's own listener: a library caller running\n    twelve `toStdout` conversions left twelve 'error' listeners on `process.stdout` and got\n    Node's MaxListenersExceededWarning on the eleventh. That fix is `BufferedLineWriter`'s\n    `#release()`, and it cannot reach this one — under `gzip` the writer's stream is the\n    compressor, and `process.stdout` is only ever the compressor's destination. So the same\n    leak survived on the same stream, behind one extra flag, and the regression test written\n    to catch it does not pass `gzip: true`.\n\n    A file stream is a different matter and needs no release: it is created for this\n    conversion and closed with it. The discipline is the writer's — release only from a\n    stream this tool does not own.\n  */\n  const forward = (error: Error): void => {\n    compressor.destroy(error);\n  };\n  target.on('error', forward);\n  const release = (): void => {\n    if (target === process.stdout || target === process.stderr) target.off('error', forward);\n  };\n\n  /*\n    pipe() ends its destination when the source ends, and stdout must survive the\n    conversion: the writer already refuses to close it, because a closed stdout breaks\n    every later write in the process. Nothing waits on stdout either — it is not this\n    tool's to finish.\n  */\n  const toStdout = target === process.stdout;\n  compressor.pipe(target, { end: !toStdout });\n  if (toStdout) return { stream: compressor, settled: Promise.resolve(), release };\n\n  /*\n    A failure under the compressor rejects both this promise and the writer's own end(),\n    and end() is the one awaited first. Without a handler attached here that rejection\n    belonged to nobody, and Node killed the process over it: `--gzip` into an unwritable\n    path printed a raw EISDIR stack trace instead of the ordinary \"Writing to ... failed\"\n    message and exit 1, which is what the same path does uncompressed.\n\n    Attaching the handler is enough to make it handled. Awaiting `settled` downstream still\n    reports the failure in the case where end() happened to succeed.\n  */\n  const settled = finished(target);\n  settled.catch(() => {});\n  return { stream: compressor, settled, release };\n}\n\n/**\n * Write one of the sidecar files, reporting a failure the way the signal writer does.\n *\n * These three used to call `writeFile` bare, so a failure escaped as whatever the\n * filesystem said — `EISDIR: illegal operation on a directory, open '...'` with no hint\n * and, more importantly, no mention that the signal files had already been written. The\n * conversion stopped half-done and the message gave no sign of it.\n */\nasync function writeOutputFile(\n  outputDir: string,\n  name: string,\n  contents: string,\n  gzip = false,\n  bom = false,\n): Promise<void> {\n  // metadata.json never gets one: JSON.parse rejects a leading U+FEFF, so a mark there\n  // would break every reader of the file to help a spreadsheet that will not open it.\n  if (bom) contents = UTF8_BOM + contents;\n  try {\n    // The sidecars are built in memory before being written, so compressing them in memory\n    // costs nothing extra. Only the signal tables are large enough to need a stream.\n    await writeFile(path.join(outputDir, name), gzip ? gzipSync(contents) : contents, gzip ? undefined : 'utf8');\n  } catch (cause) {\n    const detail = cause instanceof Error ? cause.message : String(cause);\n    throw new ConversionError(\n      'WRITE_FAILED',\n      `Writing \"${name}\" to \"${outputDir}\" failed: ${detail}`,\n      writeHint(cause),\n    );\n  }\n}\n\nasync function writeChannelsCsv(\n  outputDir: string,\n  file: EdfFile,\n  plan: ConversionPlan,\n  gzip: boolean,\n  bom: boolean,\n): Promise<WrittenFile> {\n  const includedColumns = new Set(plan.groups.flatMap((g) => g.channels.map((c) => c.signal.index)));\n  const fileFor = new Map<number, string>();\n  for (const group of plan.groups) {\n    for (const channel of group.channels) fileFor.set(channel.signal.index, group.fileName);\n  }\n\n  const lines = [\n    csvRow([\n      'column',\n      'signal_index',\n      'label',\n      'unit',\n      'sampling_rate_hz',\n      'samples_per_record',\n      'physical_min',\n      'physical_max',\n      'digital_min',\n      'digital_max',\n      'transducer',\n      'prefiltering',\n      'output_file',\n      'converted',\n    ]),\n  ];\n\n  for (const signal of file.header.signals) {\n    if (signal.isAnnotations) continue;\n    const column = plan.columnNames.get(signal.index) ?? `signal_${signal.index}`;\n    lines.push(\n      csvRow([\n        column,\n        String(signal.index),\n        signal.label,\n        signal.physicalDimension,\n        String(signal.samplingRate),\n        String(signal.samplesPerRecord),\n        String(signal.physicalMin),\n        String(signal.physicalMax),\n        String(signal.digitalMin),\n        String(signal.digitalMax),\n        signal.transducer,\n        signal.prefiltering,\n        fileFor.get(signal.index) ?? '',\n        includedColumns.has(signal.index) ? 'yes' : 'no',\n      ]),\n    );\n  }\n\n  const name = gzip ? 'channels.csv.gz' : 'channels.csv';\n  await writeOutputFile(outputDir, name, lines.join('\\n') + '\\n', gzip, bom);\n  return { name, rows: lines.length - 1 };\n}\n\n/*\n  The bounds an annotation is filtered against: what the caller actually asked for, not the\n  window that survived being clamped to the recording.\n\n  Filtering by the resolved window meant an unbounded request still lost events. `--end 999h`\n  on a three-second file clamps to 3, and `--start 0` gets its end from the recording, so\n  both filtered to [0, 3) and dropped the markers at 3.0 and 3.5 that a bare invocation\n  keeps — asking for more of a recording returned less of it.\n\n  An end the caller did not give is unbounded, not \"the end of the data\": EDF+ lets an\n  annotation sit past the last sample, which is exactly where an end-of-recording marker is.\n\n  `--duration` is measured from wherever the conversion actually starts. Anchoring it at 0\n  instead read the same absent `--start` two ways in two adjacent lines, and on a recording\n  that does not begin at zero the two windows did not even overlap: an EDF+D file whose first\n  record sits at 30 s converted its samples from [30, 35) while filtering annotations against\n  (-inf, 5), so every event inside the converted window was dropped and `annotations.csv` came\n  back empty. `resolveRange` has always defaulted the same missing start to the earliest\n  record, which is where this now takes it from.\n*/\nfunction requestedAnnotationWindow(\n  options: ConvertOptions,\n  recordingStart: number,\n): { from: number; to: number } {\n  const from = options.start ?? -Infinity;\n  const to =\n    options.end !== undefined\n      ? options.end\n      : options.duration !== undefined\n        ? (options.start ?? recordingStart) + options.duration\n        : Infinity;\n  return { from, to };\n}\n\nasync function writeAnnotationsCsv(\n  outputDir: string,\n  annotations: readonly Annotation[],\n  window: { from: number; to: number },\n  gzip: boolean,\n  bom: boolean,\n): Promise<WrittenFile> {\n  const inWindow = annotations\n    .filter((a) => a.onset >= window.from && a.onset < window.to)\n    .sort((a, b) => a.onset - b.onset || a.recordIndex - b.recordIndex);\n\n  const lines = [csvRow(['onset_s', 'duration_s', 'description', 'record_index'])];\n  for (const annotation of inWindow) {\n    lines.push(\n      csvRow([\n        String(annotation.onset),\n        annotation.duration === null ? '' : String(annotation.duration),\n        annotation.text,\n        String(annotation.recordIndex),\n      ]),\n    );\n  }\n\n  const name = gzip ? 'annotations.csv.gz' : 'annotations.csv';\n  await writeOutputFile(outputDir, name, lines.join('\\n') + '\\n', gzip, bom);\n  return { name, rows: inWindow.length };\n}\n\n/**\n * What to try next, chosen from what actually went wrong.\n *\n * Every write failure carried the same advice — \"Free up space or choose another destination\n * with --out\" — which fits exactly one errno. A directory sitting where signals.csv belongs\n * came back telling the reader to free up disk space, and so did a read-only volume, a\n * permission denial and a path too long for the filesystem. Wrong advice is worse than none:\n * it sends someone to check `df` on a disk that is fine, and the thing that is actually\n * wrong stays unexamined.\n *\n * The errno is the one piece of the failure that names the cause, so it is what picks the\n * sentence. Anything unrecognised keeps the general form rather than guessing.\n */\nfunction writeHint(cause: unknown, toStdout = false): string {\n  /*\n    The stdout path writes no files, and --out is the flag its user chose not to pass.\n\n    Both halves of this sentence were wrong there: \"the files written so far\" named files\n    that do not exist, and \"choose another destination with --out\" is advice for a different\n    command — the destination is whatever the shell redirected the stream to. Same class as\n    the disk-space hint this function replaced, one flag over.\n  */\n  const preamble = toStdout\n    ? 'What reached stdout before it failed is incomplete and should not be used. '\n    : 'The files written so far are incomplete and should not be used. ';\n  const elsewhere = toStdout ? 'redirect it somewhere else' : 'choose another with --out';\n  const code = (cause as NodeJS.ErrnoException | null)?.code;\n  switch (code) {\n    case 'ENOSPC':\n      return `${preamble}The destination is out of space; free some up or ${elsewhere}.`;\n    case 'EDQUOT':\n      return `${preamble}You are over your disk quota on this filesystem; ${elsewhere}.`;\n    case 'EACCES':\n    case 'EPERM':\n      return `${preamble}You do not have permission to write there; ${elsewhere}.`;\n    case 'EROFS':\n      return `${preamble}That filesystem is mounted read-only; ${elsewhere}.`;\n    case 'EISDIR':\n      return `${preamble}A directory is sitting where that file belongs; remove or rename it, or ${elsewhere}.`;\n    case 'ENOENT':\n      return `${preamble}Part of that path no longer exists; make sure nothing is removing it while the conversion runs.`;\n    case 'ENAMETOOLONG':\n      return `${preamble}That path is longer than the filesystem allows; ${toStdout ? 'redirect it somewhere shorter' : 'choose a shorter destination with --out'}.`;\n    case 'EMFILE':\n    case 'ENFILE':\n      return `${preamble}Too many files are open; a recording with many sampling rates opens one output file per rate, so --channels narrows it.`;\n    case 'EPIPE':\n      return `${preamble}Whatever was reading the output closed it before the conversion finished.`;\n    default:\n      return `${preamble}Check the destination and run the conversion again.`;\n  }\n}\n\n/**\n * Confirms that everything handed to a file-backed stdout actually arrived.\n *\n * `edf2csv rec.edf --stdout > out.csv` onto a volume that the output very nearly fills lost\n * the tail in silence: 94,977 of 102,400 rows on disk, the file ending mid-row, stderr\n * announcing \"Wrote 102,400 rows to stdout.\" and the process exiting 0. The same recording\n * onto the same volume through `--out` fails correctly, which is what gives it away.\n *\n * POSIX `write` returns a short count rather than an error when the disk fills partway\n * through a single call, and only the NEXT write raises ENOSPC. `--out` always has a next\n * write — channels.csv and metadata.json come after — so it always finds out. `--stdout`\n * has nothing after it, and when fd 1 is a regular file Node's stdout is a SyncWriteStream\n * whose `_write` discards the byte count `writeSync` returns, so nothing is raised at all.\n * No error means no `#failure`, so checking that alone would not have caught this.\n *\n * What can be checked is the descriptor: how much it grew against how much it was given.\n * Only for a regular file — a pipe, a terminal or a socket has no size to compare, and on\n * those a short write cannot go unreported this way. Appending (`>>`) is fine, since the\n * starting size is taken before anything is written.\n */\nfunction auditStdout(): { count: (bytes: number) => void; verify: () => void } | null {\n  let startSize: number;\n  try {\n    const info = fstatSync(1);\n    if (!info.isFile()) return null;\n    startSize = info.size;\n  } catch {\n    // No usable descriptor to audit; the conversion is not the place to complain about it.\n    return null;\n  }\n\n  let expected = 0;\n  return {\n    count: (bytes: number): void => {\n      expected += bytes;\n    },\n    verify: (): void => {\n      let landed: number;\n      try {\n        landed = fstatSync(1).size - startSize;\n      } catch {\n        return;\n      }\n      if (landed >= expected) return;\n      throw new ConversionError(\n        'WRITE_FAILED',\n        `Writing to stdout failed: ${expected - landed} of ${expected} bytes did not reach ` +\n          `the destination, which stopped accepting them part way through.`,\n        'What is there ends mid-row and should not be used. The destination is almost ' +\n          'certainly out of space — a short write is how a filesystem reports filling up ' +\n          'mid-write, and nothing after it raised an error because there was nothing after it.',\n      );\n    },\n  };\n}\n\n/** Data rows across every signal table, so \"nothing was written\" is one question. */\nfunction rowsIn(written: readonly WrittenFile[]): number {\n  return written.reduce((total, file) => total + file.rows, 0);\n}\n\n\n/** Raised when the input moved while it was being read. See where it is pushed. */\nfunction inputChanged(hadChecksum: boolean): Diagnostic {\n  return {\n    code: 'INPUT_CHANGED',\n    severity: 'warning',\n    message:\n      'The input changed while it was being converted, so this output covers the file as ' +\n      'it was when the conversion started, not as it is now.',\n    hint: hadChecksum\n      ? 'No checksum was recorded: the bytes that were converted are no longer there to ' +\n        'hash. Convert again once the recording is finished.'\n      : 'Convert again once the recording is finished to pick up the rest.',\n  };\n}\n\nasync function writeMetadata(\n  outputDir: string,\n  inputPath: string,\n  file: EdfFile,\n  plan: ConversionPlan,\n  written: readonly WrittenFile[],\n  annotationCount: number,\n  /** Hash of the bytes that were converted, or null when it could not be vouched for. */\n  checksum: string | null,\n): Promise<void> {\n  const { header } = file;\n\n  /*\n    The file as it was when it was opened, not as it is now.\n\n    Both of these used to come from re-opening the path once the CSVs were written, which\n    describes whatever answers to that name by then rather than what was converted. A\n    recording still being written grew from 2,000 records to 3,000 mid-conversion and\n    metadata.json recorded `data_records: 2000` — correct, the CSV holds 2,000 — beside the\n    byte count and SHA-256 of the 3,000-record file. The two halves of one provenance record\n    described two different files, and the checksum covered bytes nobody had converted.\n    Replacing the file at that path did the same thing more thoroughly.\n\n    `file.fileSize` is the number every record count and window in this output was derived\n    from, and the hash is taken over exactly those bytes through the descriptor already open\n    on them, so the record describes one file throughout.\n  */\n  const metadata = {\n    tool: { name: 'edf2csv', version: TOOL_VERSION },\n    source: {\n      path: path.resolve(inputPath),\n      bytes: file.fileSize,\n      modified: new Date(file.modifiedAtOpenMs).toISOString(),\n      sha256: checksum,\n    },\n    recording: {\n      format: describeFormat(header),\n      version: header.version,\n      patient_id: header.patientId,\n      recording_id: header.recordingId,\n      // Zone-less on purpose: EDF records local wall-clock digits and no timezone.\n      start_datetime_local: formatWallClock(header.startDateTime),\n      start_date_raw: header.startDateRaw,\n      start_time_raw: header.startTimeRaw,\n      data_records: file.recordCount,\n      data_records_declared: header.declaredRecordCount,\n      record_duration_seconds: header.recordDuration,\n      duration_seconds: file.durationSeconds,\n      signal_count: header.signalCount,\n      annotation_channels: file.annotationSignals.length,\n    },\n    conversion: {\n      converted_at: new Date().toISOString(),\n      start_seconds: plan.range.startSeconds,\n      end_seconds: plan.range.endSeconds,\n      whole_recording: plan.range.isWholeRecording,\n      records_converted: [plan.range.startRecord, plan.range.endRecord],\n      annotations_written: annotationCount,\n      /*\n        Which shape the signal table is in, which nothing recorded.\n\n        A wide `signals.csv` and a long one are different files with different columns, and\n        metadata.json described them identically — so a pipeline handed an output directory\n        could not tell from the archive which it had. It matters most for `rate_groups` right\n        below: in the wide layout those entries are one per file and their `channels` are that\n        file's columns, and in the long layout every entry names the one shared table and its\n        `channels` are values in that table's `channel` column. Same array, two readings, and\n        no way to know which applied.\n      */\n      layout: plan.layout,\n      files: written.map((f) => ({ name: f.name, rows: f.rows })),\n      rate_groups: plan.groups.map((g) => ({\n        file: g.fileName,\n        sampling_rate_hz: g.rate,\n        channels: g.channels.map((c) => c.column),\n        decimals: g.channels.map((c) => c.decimals),\n      })),\n    },\n    notes: [...withoutFileRateWarning(file.diagnostics), ...plan.diagnostics].map((d) => ({\n      code: d.code,\n      severity: d.severity,\n      message: d.message,\n    })),\n  };\n\n  await writeOutputFile(outputDir, 'metadata.json', JSON.stringify(metadata, null, 2) + '\\n');\n}\n\n\n"]}
+{"version":3,"file":"run.js","sourceRoot":"","sources":["../../src/convert/run.ts"],"names":[],"mappings":"AAAA;;;;;;GAMG;AAEH,OAAO,EAAE,iBAAiB,EAAE,SAAS,EAAE,MAAM,SAAS,CAAC;AACvD,OAAO,EAAE,KAAK,EAAE,OAAO,EAAE,IAAI,EAAE,SAAS,EAAE,MAAM,kBAAkB,CAAC;AACnE,OAAO,EAAE,UAAU,EAAE,MAAM,aAAa,CAAC;AACzC,OAAO,EAAE,gBAAgB,EAAE,MAAM,SAAS,CAAC;AAC3C,OAAO,EAAE,QAAQ,EAAE,QAAQ,EAAE,MAAM,sBAAsB,CAAC;AAE1D,OAAO,EAAE,UAAU,EAAE,QAAQ,EAAE,MAAM,WAAW,CAAC;AACjD,OAAO,IAAI,MAAM,WAAW,CAAC;AAG7B,OAAO,EAAE,OAAO,EAAE,MAAM,kBAAkB,CAAC;AAC3C,OAAO,EAAE,cAAc,EAAE,WAAW,EAAE,eAAe,EAAE,MAAM,kBAAkB,CAAC;AAEhF,OAAO,EAAE,QAAQ,EAAE,MAAM,kBAAkB,CAAC;AAE5C,OAAO,EACL,kBAAkB,EAClB,uBAAuB,EACvB,QAAQ,EACR,MAAM,EACN,cAAc,GACf,MAAM,kBAAkB,CAAC;AAC1B,OAAO,EAAE,MAAM,EAAE,MAAM,mBAAmB,CAAC;AAC3C,OAAO,EACL,KAAK,EACL,mBAAmB,EACnB,iBAAiB,EACjB,eAAe,EACf,oBAAoB,GACrB,MAAM,qBAAqB,CAAC;AAE7B,OAAO,EAAE,SAAS,EAAE,sBAAsB,EAAE,MAAM,WAAW,CAAC;AAE9D,OAAO,EAAE,kBAAkB,EAAE,MAAM,aAAa,CAAC;AACjD,OAAO,EAAE,mBAAmB,EAAE,YAAY,EAAE,MAAM,iBAAiB,CAAC;AACpE,OAAO,EAAE,OAAO,IAAI,YAAY,EAAE,MAAM,eAAe,CAAC;AAExD,OAAO,EAAE,YAAY,EAAE,CAAC;AAWxB;;;;;;;;;GASG;AACH,MAAM,CAAC,MAAM,iBAAiB,GAAqC,IAAI,GAAG,CAAC,CAAC,qBAAqB,CAAC,CAAC,CAAC;AAEpG,MAAM,OAAO,eAAgB,SAAQ,KAAK;IAC/B,IAAI,CAAsB;IAC1B,IAAI,CAAqB;IAClC,YAAY,IAAyB,EAAE,OAAe,EAAE,IAAa,EAAE,OAAsB;QAC3F,KAAK,CAAC,OAAO,EAAE,OAAO,CAAC,CAAC;QACxB,IAAI,CAAC,IAAI,GAAG,iBAAiB,CAAC;QAC9B,IAAI,CAAC,IAAI,GAAG,IAAI,CAAC;QACjB,IAAI,CAAC,IAAI,GAAG,IAAI,CAAC;IACnB,CAAC;CACF;AA8DD,MAAM,CAAC,KAAK,UAAU,OAAO,CAAC,SAAiB,EAAE,UAA0B,EAAE;IAC3E,MAAM,SAAS,GAAG,IAAI,CAAC,GAAG,EAAE,CAAC;IAC7B,MAAM,IAAI,GAAG,MAAM,OAAO,CAAC,IAAI,CAAC,SAAS,CAAC,CAAC;IAE3C,IAAI,CAAC;QACH;;;;;;;;;;;;;;UAcE;QACF,MAAM,cAAc,GAAG,OAAO,CAAC,QAAQ,KAAK,IAAI,CAAC,CAAC,CAAC,MAAM,IAAI,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC;QAE9E,+EAA+E;QAC/E,8EAA8E;QAC9E,iFAAiF;QACjF,wCAAwC;QACxC,MAAM,cAAc,GAClB,IAAI,CAAC,iBAAiB,CAAC,MAAM,GAAG,CAAC;YAC/B,CAAC,CAAC,MAAM,IAAI,CAAC,eAAe,EAAE;YAC9B,CAAC,CAAC,EAAE,WAAW,EAAE,EAAkB,EAAE,YAAY,EAAE,EAAuB,EAAE,SAAS,EAAE,CAAC,EAAE,CAAC;QAE/F,MAAM,MAAM,GAAG,kBAAkB,CAAC,IAAI,EAAE,cAAc,CAAC,CAAC;QAExD,MAAM,IAAI,GAAG,SAAS,CACpB;YACE,OAAO,EAAE,IAAI,CAAC,MAAM,CAAC,OAAO;YAC5B,cAAc,EAAE,IAAI,CAAC,MAAM,CAAC,cAAc;YAC1C,WAAW,EAAE,IAAI,CAAC,WAAW;YAC7B,oBAAoB,EAAE,IAAI,CAAC,iBAAiB,CAAC,MAAM,GAAG,CAAC;YACvD,YAAY,EAAE,MAAM,CAAC,MAAM;SAC5B,EACD,OAAO,CACR,CAAC;QACF,IAAI,CAAC,WAAW,CAAC,IAAI,CAAC,GAAG,MAAM,CAAC,WAAW,CAAC,CAAC;QAE7C,IAAI,OAAO,CAAC,QAAQ,KAAK,IAAI,EAAE,CAAC;YAC9B,IAAI,CAAC,IAAI,CAAC,YAAY,EAAE,CAAC;gBACvB,MAAM,IAAI,eAAe,CACvB,qBAAqB,EACrB,4EAA4E,EAC5E,4BAA4B,CAC7B,CAAC;YACJ,CAAC;YACD;;;;;;;;;;;;cAYE;YACF,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;gBAC7B,MAAM,IAAI,eAAe,CACvB,qBAAqB,EACrB,IAAI,CAAC,WAAW,CAAC,MAAM,KAAK,CAAC;oBAC3B,CAAC,CAAC,+EAA+E;wBAC/E,wBAAwB;oBAC1B,CAAC,CAAC,kFAAkF,EACtF,IAAI,CAAC,WAAW,CAAC,MAAM,KAAK,CAAC;oBAC3B,CAAC,CAAC,sEAAsE;oBACxE,CAAC,CAAC,+EAA+E,CACpF,CAAC;YACJ,CAAC;YAED,oFAAoF;YACpF,IAAI,IAAI,CAAC,MAAM,KAAK,MAAM,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;gBACvD,MAAM,IAAI,eAAe,CACvB,qBAAqB;gBACrB,iFAAiF;gBACjF,+EAA+E;gBAC/E,gFAAgF;gBAChF,0DAA0D;gBAC1D,iEAAiE,IAAI,CAAC,MAAM,CAAC,MAAM,IAAI;oBACrF,8CAA8C;oBAC9C,IAAI,MAAM,CAAC,WAAW,CAAC,IAAI,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC,IAAI,EACnF,gFAAgF;oBAC9E,+CAA+C,CAClD,CAAC;YACJ,CAAC;YACD,IAAI,YAAY,GAAG,KAAK,CAAC;YACzB,MAAM,OAAO,GAAG,MAAM,gBAAgB,CAAC,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,MAAM,CAAC,MAAM,EAAE,OAAO,EAAE,CAAC,MAAM,EAAE,EAAE;gBAC1F,YAAY,GAAG,MAAM,CAAC;YACxB,CAAC,CAAC,CAAC;YACH,IAAI,MAAM,IAAI,CAAC,gBAAgB,EAAE;gBAAE,IAAI,CAAC,WAAW,CAAC,IAAI,CAAC,YAAY,CAAC,KAAK,CAAC,CAAC,CAAC;YAC9E,OAAO;gBACL,SAAS,EAAE,GAAG;gBACd,KAAK,EAAE,OAAO;gBACd,YAAY;gBACZ,eAAe,EAAE,CAAC;gBAClB,WAAW,EAAE,CAAC,GAAG,sBAAsB,CAAC,IAAI,CAAC,WAAW,CAAC,EAAE,GAAG,IAAI,CAAC,WAAW,CAAC;gBAC/E,IAAI;gBACJ,IAAI;gBACJ,SAAS,EAAE,IAAI,CAAC,GAAG,EAAE,GAAG,SAAS;aAClC,CAAC;QACJ,CAAC;QAED,MAAM,SAAS,GAAG,OAAO,CAAC,SAAS,IAAI,gBAAgB,CAAC,SAAS,CAAC,CAAC;QACnE,MAAM,gCAAgC,CAAC,SAAS,EAAE,SAAS,EAAE,IAAI,EAAE,IAAI,EAAE,OAAO,CAAC,CAAC;QAClF,MAAM,gBAAgB,CAAC,SAAS,EAAE,OAAO,CAAC,KAAK,KAAK,IAAI,CAAC,CAAC;QAE1D,MAAM,OAAO,GAAkB,EAAE,CAAC;QAElC,IAAI,IAAI,CAAC,YAAY,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;YAChD,MAAM,OAAO,GAAG,MAAM,gBAAgB,CAAC,IAAI,EAAE,IAAI,EAAE,SAAS,EAAE,MAAM,CAAC,MAAM,EAAE,OAAO,CAAC,CAAC;YACtF,OAAO,CAAC,IAAI,CAAC,GAAG,OAAO,CAAC,CAAC;QAC3B,CAAC;aAAM,IAAI,IAAI,CAAC,YAAY,EAAE,CAAC;YAC7B;;;;;;;;;;;;;;;;;cAiBE;YACF,MAAM,eAAe,GAAG,IAAI,CAAC,WAAW,CAAC,MAAM,KAAK,CAAC,CAAC;YACtD,IAAI,CAAC,WAAW,CAAC,IAAI,CAAC;gBACpB,IAAI,EAAE,YAAY;gBAClB,QAAQ,EAAE,SAAS;gBACnB,OAAO,EAAE,eAAe;oBACtB,CAAC,CAAC,kFAAkF;wBAClF,MAAM;oBACR,CAAC,CAAC,mFAAmF;wBACnF,4CAA4C;gBAChD,IAAI,EAAE,eAAe;oBACnB,CAAC,CAAC,8EAA8E;wBAC9E,mCAAmC;oBACrC,CAAC,CAAC,oFAAoF;wBACpF,UAAU;aACf,CAAC,CAAC;QACL,CAAC;QAED,IAAI,OAAO,CAAC,eAAe,KAAK,IAAI,IAAI,IAAI,CAAC,iBAAiB,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;YAC5E,IAAI,CAAC,WAAW,CAAC,IAAI,CAAC;gBACpB,IAAI,EAAE,gBAAgB;gBACtB,QAAQ,EAAE,SAAS;gBACnB,OAAO,EACL,iFAAiF;oBACjF,mCAAmC;gBACrC,IAAI,EAAE,8FAA8F;aACrG,CAAC,CAAC;QACL,CAAC;QAED,IAAI,kBAAkB,GAAG,CAAC,CAAC;QAC3B,IAAI,IAAI,CAAC,iBAAiB,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;YACtC,MAAM,MAAM,GAAG,MAAM,mBAAmB,CACtC,SAAS,EACT,cAAc,CAAC,WAAW,EAC1B,yBAAyB,CAAC,OAAO,EAAE,IAAI,CAAC,KAAK,CAAC,qBAAqB,CAAC,EACpE,OAAO,CAAC,IAAI,KAAK,IAAI,EACrB,OAAO,CAAC,GAAG,KAAK,IAAI,CACrB,CAAC;YACF,OAAO,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC;YACrB,kBAAkB,GAAG,MAAM,CAAC,IAAI,CAAC;QACnC,CAAC;QAED,OAAO,CAAC,IAAI,CACV,MAAM,gBAAgB,CAAC,SAAS,EAAE,IAAI,EAAE,IAAI,EAAE,OAAO,CAAC,IAAI,KAAK,IAAI,EAAE,OAAO,CAAC,GAAG,KAAK,IAAI,CAAC,CAC3F,CAAC;QAEF;;;;;;;;UAQE;QACF,MAAM,OAAO,GAAG,MAAM,IAAI,CAAC,gBAAgB,EAAE,CAAC;QAC9C,IAAI,OAAO;YAAE,IAAI,CAAC,WAAW,CAAC,IAAI,CAAC,YAAY,CAAC,OAAO,CAAC,QAAQ,KAAK,IAAI,CAAC,CAAC,CAAC;QAE5E,MAAM,aAAa,CACjB,SAAS,EACT,SAAS,EACT,IAAI,EACJ,IAAI,EACJ,OAAO,EACP,kBAAkB,EAClB,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,cAAc,CAChC,CAAC;QAEF,MAAM,KAAK,GAAG,MAAM,eAAe,CAAC,SAAS,EAAE,OAAO,CAAC,CAAC;QAExD,OAAO;YACL,SAAS;YACT,KAAK,EAAE,OAAO;YACd,YAAY,EAAE,KAAK;YACnB,eAAe,EAAE,kBAAkB;YACnC,WAAW,EAAE,CAAC,GAAG,sBAAsB,CAAC,IAAI,CAAC,WAAW,CAAC,EAAE,GAAG,IAAI,CAAC,WAAW,EAAE,GAAG,KAAK,CAAC;YACzF,IAAI;YACJ,IAAI;YACJ,SAAS,EAAE,IAAI,CAAC,GAAG,EAAE,GAAG,SAAS;SAClC,CAAC;IACJ,CAAC;YAAS,CAAC;QACT,MAAM,IAAI,CAAC,KAAK,EAAE,CAAC;IACrB,CAAC;AACH,CAAC;AAED;;;;;;;;;;;;;;;;EAgBE;AACF,MAAM,cAAc,GAClB,6GAA6G,CAAC;AAEhH;;;;;;;GAOG;AACH,KAAK,UAAU,eAAe,CAC5B,SAAiB,EACjB,OAA+B;IAE/B,MAAM,OAAO,GAAG,MAAM,OAAO,CAAC,SAAS,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,CAAC;IAC3D,IAAI,CAAC,OAAO;QAAE,OAAO,EAAE,CAAC;IAExB,qFAAqF;IACrF,MAAM,KAAK,GAAG,IAAI,GAAG,CAAC,CAAC,GAAG,OAAO,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,EAAE,eAAe,CAAC,CAAC,CAAC;IACxE,MAAM,KAAK,GAAG,OAAO,CAAC,MAAM,CAAC,CAAC,IAAI,EAAE,EAAE,CAAC,cAAc,CAAC,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,KAAK,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC;IAC7F,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC;QAAE,OAAO,EAAE,CAAC;IAElC,OAAO;QACL;YACE,IAAI,EAAE,cAAc;YACpB,QAAQ,EAAE,SAAS;YACnB;;;;;;;;;;cAUE;YACF,OAAO,EACL,GAAG,MAAM,CAAC,KAAK,CAAC,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,KAAK,6BAA6B;gBAClF,sCAAsC,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,MAAM,iBAAiB;YAC5F,IAAI,EACF,UAAU,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,MAAM,0CAA0C;gBACtF,mCAAmC;SACtC;KACF,CAAC;AACJ,CAAC;AAED,MAAM,UAAU,gBAAgB,CAAC,SAAiB;IAChD,MAAM,IAAI,GAAG,IAAI,CAAC,QAAQ,CAAC,SAAS,EAAE,IAAI,CAAC,OAAO,CAAC,SAAS,CAAC,CAAC,CAAC;IAC/D,OAAO,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,OAAO,CAAC,SAAS,CAAC,EAAE,GAAG,IAAI,MAAM,CAAC,CAAC;AAC3D,CAAC;AAED,yFAAyF;AACzF,KAAK,UAAU,gCAAgC,CAC7C,SAAiB,EACjB,SAAiB,EACjB,IAAa,EACb,IAAoB,EACpB,OAAuB;IAEvB;;;;;;;;MAQE;IACF,MAAM,MAAM,GAAG,OAAO,CAAC,IAAI,KAAK,IAAI,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,MAAM,CAAC;IAC1D,MAAM,KAAK,GAAG,IAAI,GAAG,CAAC,IAAI,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,QAAQ,CAAC,CAAC,CAAC;IAClE,IAAI,IAAI,CAAC,iBAAiB,CAAC,MAAM,GAAG,CAAC;QAAE,KAAK,CAAC,GAAG,CAAC,cAAc,MAAM,EAAE,CAAC,CAAC;IACzE,KAAK,CAAC,GAAG,CAAC,WAAW,MAAM,EAAE,CAAC,CAAC;IAC/B,KAAK,CAAC,GAAG,CAAC,eAAe,CAAC,CAAC;IAE3B,MAAM,aAAa,GAAG,IAAI,CAAC,OAAO,CAAC,SAAS,CAAC,CAAC;IAC9C,MAAM,SAAS,GAAG,MAAM,IAAI,CAAC,SAAS,CAAC,CAAC;IAExC,KAAK,MAAM,IAAI,IAAI,KAAK,EAAE,CAAC;QACzB,MAAM,MAAM,GAAG,IAAI,CAAC,IAAI,CAAC,SAAS,EAAE,IAAI,CAAC,CAAC;QAC1C,MAAM,cAAc,GAAG,IAAI,CAAC,OAAO,CAAC,MAAM,CAAC,CAAC;QAC5C,MAAM,UAAU,GAAG,MAAM,IAAI,CAAC,MAAM,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,CAAC;QACxD,MAAM,QAAQ,GAAG,cAAc,KAAK,aAAa,CAAC;QAClD,MAAM,QAAQ,GACZ,UAAU,KAAK,IAAI,IAAI,UAAU,CAAC,GAAG,KAAK,SAAS,CAAC,GAAG,IAAI,UAAU,CAAC,GAAG,KAAK,SAAS,CAAC,GAAG,CAAC;QAC9F,IAAI,CAAC,QAAQ,IAAI,CAAC,QAAQ;YAAE,SAAS;QAErC,MAAM,IAAI,eAAe,CACvB,wBAAwB,EACxB,gBAAgB,MAAM,4CAA4C,EAClE,qEAAqE,CACtE,CAAC;IACJ,CAAC;AACH,CAAC;AAED,KAAK,UAAU,gBAAgB,CAAC,GAAW,EAAE,KAAc;IACzD;;;;;;;;;;;;MAYE;IACF,MAAM,MAAM,GAAG,IAAI,CAAC,OAAO,CAAC,GAAG,CAAC,CAAC;IACjC,IAAI,MAAM,IAAI,MAAM,KAAK,GAAG,EAAE,CAAC;QAC7B,IAAI,CAAC;YACH,MAAM,KAAK,CAAC,MAAM,EAAE,EAAE,SAAS,EAAE,IAAI,EAAE,CAAC,CAAC;QAC3C,CAAC;QAAC,OAAO,KAAc,EAAE,CAAC;YACxB,oFAAoF;YACpF,4EAA4E;YAC5E,yEAAyE;YACzE,MAAM,IAAI,GAAG,MAAM,IAAI,CAAC,MAAM,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,CAAC;YAClD,IAAI,IAAI,IAAI,CAAC,IAAI,CAAC,WAAW,EAAE,EAAE,CAAC;gBAChC,MAAM,IAAI,eAAe,CACvB,mBAAmB,EACnB,kBAAkB,GAAG,OAAO,MAAM,+BAA+B,EACjE,4EAA4E,CAC7E,CAAC;YACJ,CAAC;YACD,MAAM,IAAI,eAAe,CACvB,mBAAmB,EACnB,kBAAkB,GAAG,MAAM,eAAe,CAAC,KAAK,CAAC,GAAG,EACpD,oEAAoE,CACrE,CAAC;QACJ,CAAC;IACH,CAAC;IAED,IAAI,OAAO,GAAG,IAAI,CAAC;IACnB,IAAI,CAAC;QACH,MAAM,KAAK,CAAC,GAAG,CAAC,CAAC;IACnB,CAAC;IAAC,OAAO,KAAc,EAAE,CAAC;QACxB,IAAK,KAA+B,CAAC,IAAI,KAAK,QAAQ,EAAE,CAAC;YACvD,MAAM,IAAI,eAAe,CACvB,mBAAmB,EACnB,kBAAkB,GAAG,MAAM,eAAe,CAAC,KAAK,CAAC,GAAG,EACpD,oEAAoE,CACrE,CAAC;QACJ,CAAC;QACD,OAAO,GAAG,KAAK,CAAC;IAClB,CAAC;IAED,IAAI,CAAC,OAAO,EAAE,CAAC;QACb,MAAM,QAAQ,GAAG,MAAM,IAAI,CAAC,GAAG,CAAC,CAAC,KAAK,CAAC,GAAG,EAAE,CAAC,IAAI,CAAC,CAAC;QAEnD,2EAA2E;QAC3E,+EAA+E;QAC/E,IAAI,QAAQ,IAAI,CAAC,QAAQ,CAAC,WAAW,EAAE,EAAE,CAAC;YACxC,MAAM,IAAI,eAAe,CACvB,mBAAmB,EACnB,IAAI,GAAG,wDAAwD,EAC/D,gCAAgC,CACjC,CAAC;QACJ,CAAC;QACD,IAAI,CAAC,KAAK,EAAE,CAAC;YACX,MAAM,IAAI,eAAe,CACvB,eAAe,EACf,IAAI,GAAG,mBAAmB,EAC1B,yEAAyE,CAC1E,CAAC;QACJ,CAAC;IACH,CAAC;AACH,CAAC;AAED,uEAAuE;AACvE,SAAS,eAAe,CAAC,KAAc;IACrC,MAAM,IAAI,GAAI,KAA2C,EAAE,IAAI,CAAC;IAChE,IAAI,IAAI,KAAK,QAAQ,IAAI,IAAI,KAAK,OAAO;QAAE,OAAO,mBAAmB,CAAC;IACtE,IAAI,IAAI,KAAK,QAAQ;QAAE,OAAO,kBAAkB,CAAC;IACjD,IAAI,IAAI,KAAK,SAAS;QAAE,OAAO,6CAA6C,CAAC;IAC7E,IAAI,IAAI,KAAK,OAAO;QAAE,OAAO,6BAA6B,CAAC;IAC3D,IAAI,IAAI,KAAK,cAAc;QAAE,OAAO,sBAAsB,CAAC;IAC3D,OAAO,KAAK,YAAY,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC;AAChE,CAAC;AAED,KAAK,UAAU,gBAAgB,CAC7B,IAAa,EACb,IAAoB,EACpB,SAAwB,EACxB,YAAiC,EACjC,OAAuB,EACvB,QAAoC;IAEpC,sFAAsF;IACtF,MAAM,OAAO,GAAG,eAAe,EAAE,CAAC;IAClC,8EAA8E;IAC9E,MAAM,YAAY,GAAG,oBAAoB,EAAE,CAAC;IAC5C,yFAAyF;IACzF,yDAAyD;IACzD,MAAM,KAAK,GAAG,SAAS,KAAK,IAAI,CAAC,CAAC,CAAC,WAAW,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC;IACxD;;;;MAIE;IACF,IAAI,MAAM,GAMC,IAAI,CAAC;IAEhB;;;;;;;;;;;;MAYE;IACF,MAAM,mBAAmB,GAAG,CAAC,GAAG,IAAI,CAAC;IACrC,MAAM,cAAc,GAAG,IAAI,CAAC,GAAG,CAC7B,mBAAmB,EACnB,IAAI,CAAC,KAAK,CAAC,uBAAuB,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CACtE,CAAC;IACF;;;;;;;MAOE;IACF,MAAM,YAAY,GAAG,IAAI,CAAC,GAAG,CAC3B,EAAE,GAAG,IAAI,EACT,IAAI,CAAC,KAAK,CAAC,uBAAuB,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CACtE,CAAC;IAEF,MAAM,IAAI,GAAgB,IAAI,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,UAAU,EAAE,EAAE;QAC9D,sFAAsF;QACtF,gFAAgF;QAChF,MAAM,MAAM,GACV,MAAM,EAAE,MAAM;YACd,CAAC,SAAS,KAAK,IAAI;gBACjB,CAAC,CAAC,OAAO,CAAC,MAAM;gBAChB,CAAC,CAAC,iBAAiB,CAAC,IAAI,CAAC,IAAI,CAAC,SAAS,EAAE,KAAK,CAAC,QAAQ,CAAC,EAAE;oBACtD,aAAa,EAAE,YAAY;iBAC5B,CAAC,CAAC,CAAC;QACV,MAAM,EAAE,MAAM,EAAE,OAAO,EAAE,OAAO,EAAE,GAAG,MAAM,IAAI,UAAU,CAAC,MAAM,EAAE,OAAO,CAAC,IAAI,KAAK,IAAI,CAAC,CAAC;QACzF;;;;;;;;;;;;;;UAcE;QACF,IAAI,KAAK,IAAI,MAAM,KAAK,MAAM,IAAI,CAAC,MAAM,EAAE,CAAC;YAC1C,MAAM,CAAC,EAAE,CAAC,MAAM,EAAE,CAAC,KAAa,EAAE,EAAE,CAAC,KAAK,CAAC,KAAK,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC;QAClE,CAAC;QACD;;;;;;UAME;QACF,MAAM,MAAM,GAAG,MAAM,EAAE,MAAM,IAAI,IAAI,kBAAkB,CAAC,MAAM,EAAE,cAAc,CAAC,CAAC;QAChF,IAAI,IAAI,CAAC,MAAM,KAAK,MAAM,IAAI,CAAC,MAAM;YAAE,MAAM,GAAG,EAAE,MAAM,EAAE,OAAO,EAAE,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,CAAC;QAE7F,oFAAoF;QACpF,IAAI,IAAI,CAAC,MAAM,KAAK,MAAM,IAAI,UAAU,KAAK,CAAC,EAAE,CAAC;YAC/C,IAAI,OAAO,CAAC,GAAG,KAAK,IAAI;gBAAE,MAAM,CAAC,IAAI,CAAC,QAAQ,CAAC,CAAC;YAChD,MAAM,CAAC,QAAQ,CACb,IAAI,CAAC,MAAM,KAAK,MAAM;gBACpB,CAAC,CAAC,MAAM,CAAC,CAAC,QAAQ,EAAE,SAAS,EAAE,OAAO,CAAC,CAAC;gBACxC,CAAC,CAAC,MAAM,CAAC,CAAC,QAAQ,EAAE,GAAG,KAAK,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,CAC/D,CAAC;QACJ,CAAC;QACD,OAAO;YACL,KAAK;YACL,MAAM;YACN,UAAU,EAAE,KAAK,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,mBAAmB,CAAC,CAAC,CAAC,MAAM,EAAE,CAAC,CAAC,QAAQ,EAAE,YAAY,CAAC,CAAC;YAC9F,UAAU,EAAE,iBAAiB,CAC3B,KAAK,CAAC,gBAAgB,EACtB,KAAK,CAAC,IAAI,EACV,KAAK,CAAC,YAAY,EAClB,OAAO,CACR;YACD,IAAI,EAAE,CAAC;YACP,OAAO;YACP,OAAO;SACR,CAAC;IACJ,CAAC,CAAC,CAAC;IAEH,IAAI,CAAC;QACH,MAAM,OAAO,GAAG,MAAM,gBAAgB,CAAC,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,YAAY,EAAE,OAAO,CAAC,CAAC;QAEhF;;;;;;;UAOE;QACF,IAAI,KAAK,EAAE,CAAC;YACV,mFAAmF;YACnF,iDAAiD;YACjD,IAAI,OAAO,CAAC,IAAI,KAAK,IAAI,EAAE,CAAC;gBAC1B;;;;;;;;kBAQE;gBACF,KAAK,MAAM,MAAM,IAAI,IAAI,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,EAAE,CAAC;oBAChE,KAAK,CAAC,KAAK,CAAC,MAAM,CAAC,QAAQ,CAAC,CAAC;gBAC/B,CAAC;YACH,CAAC;YACD,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,MAAM,CAAC,MAAM,CAAC;gBAAE,KAAK,CAAC,MAAM,EAAE,CAAC;QACjE,CAAC;QACD,QAAQ,EAAE,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC,CAAC;QACtD,OAAO,OAAO,CAAC;IACjB,CAAC;IAAC,OAAO,KAAK,EAAE,CAAC;QACf,KAAK,MAAM,KAAK,IAAI,IAAI;YAAE,KAAK,CAAC,MAAM,CAAC,OAAO,EAAE,CAAC;QAEjD;;;;;;;;;;;UAWE;QACF,yFAAyF;QACzF,kFAAkF;QAClF,uFAAuF;QACvF,IAAI,KAAK,YAAY,eAAe;YAAE,MAAM,KAAK,CAAC;QAElD,IAAI,KAAK,YAAY,QAAQ,EAAE,CAAC;YAC9B,MAAM,KAAK,GAAG,SAAS,KAAK,IAAI,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC,CAAC,IAAI,SAAS,GAAG,CAAC;YAC/D,MAAM,IAAI,eAAe,CACvB,kBAAkB,EAClB,KAAK,CAAC,OAAO,EACb,GAAG,KAAK,CAAC,IAAI,CAAC,CAAC,CAAC,GAAG,KAAK,CAAC,IAAI,GAAG,CAAC,CAAC,CAAC,EAAE,uBAAuB,KAAK,uBAAuB;gBACtF,oCAAoC,CACvC,CAAC;QACJ,CAAC;QAED,MAAM,MAAM,GAAG,KAAK,YAAY,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC;QACtE,MAAM,IAAI,eAAe,CACvB,cAAc,EACd,cAAc,SAAS,KAAK,IAAI,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC,CAAC,IAAI,SAAS,GAAG,YAAY,MAAM,EAAE,EAClF,SAAS,CAAC,KAAK,EAAE,SAAS,KAAK,IAAI,CAAC,CACrC,CAAC;IACJ,CAAC;AACH,CAAC;AAED;;;;;;;;;;;GAWG;AACH;;;;;;;GAOG;AACH,SAAS,WAAW,CAAC,CAAS,EAAE,CAAS;IACvC,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,GAAG,CAAC,CAAC,IAAI,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,KAAK,CAAC;AACvE,CAAC;AAED,sFAAsF;AACtF,SAAS,QAAQ,CACf,IAA0B,EAC1B,OAAmB,EACnB,WAAmB,EACnB,QAAgB;IAEhB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QACrC,MAAM,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC;QACtB,IAAI,CAAC,KAAK;YAAE,SAAS;QACrB,MAAM,MAAM,GAAG,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;QAC/B,IAAI,MAAM,IAAI,KAAK,CAAC,KAAK,CAAC,gBAAgB;YAAE,SAAS;QACrD,IAAI,WAAW,GAAG,MAAM,GAAG,KAAK,CAAC,KAAK,CAAC,IAAI,KAAK,QAAQ,EAAE,CAAC;YACzD,OAAO,KAAK,CAAC,UAAU,CAAC,WAAW,EAAE,MAAM,CAAC,CAAC;QAC/C,CAAC;IACH,CAAC;IACD,OAAO,EAAE,CAAC;AACZ,CAAC;AAED,KAAK,UAAU,eAAe,CAC5B,IAAa,EACb,IAA0B,EAC1B,KAAkB,EAClB,aAAqB,EACrB,WAAmB,EACnB,KAA8B;IAE9B,MAAM,MAAM,GAAG,IAAI,CAAC,CAAC,CAAC,EAAE,MAAM,CAAC;IAC/B,IAAI,CAAC,MAAM;QAAE,OAAO;IAEpB,MAAM,OAAO,GAAG,IAAI,UAAU,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC;IAC5C,0FAA0F;IAC1F,MAAM,GAAG,GAAgF,EAAE,CAAC;IAE5F,SAAS,CAAC;QACR,IAAI,QAAQ,GAAG,QAAQ,CAAC;QACxB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;YACrC,MAAM,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC;YACtB,IAAI,CAAC,KAAK;gBAAE,SAAS;YACrB,MAAM,MAAM,GAAG,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;YAC/B,IAAI,MAAM,IAAI,KAAK,CAAC,KAAK,CAAC,gBAAgB;gBAAE,SAAS;YACrD,MAAM,IAAI,GAAG,WAAW,GAAG,MAAM,GAAG,KAAK,CAAC,KAAK,CAAC,IAAI,CAAC;YACrD,IAAI,IAAI,GAAG,QAAQ;gBAAE,QAAQ,GAAG,IAAI,CAAC;QACvC,CAAC;QACD,IAAI,QAAQ,KAAK,QAAQ;YAAE,OAAO;QAElC;;;;;;;;;;;;;;;;;;UAkBE;QACF,MAAM,YAAY,GAAG,QAAQ,CAAC,IAAI,EAAE,OAAO,EAAE,WAAW,EAAE,QAAQ,CAAC,CAAC;QACpE,GAAG,CAAC,MAAM,GAAG,CAAC,CAAC;QACf,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,IAAI,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;YACrC,MAAM,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC;YACtB,IAAI,CAAC,KAAK;gBAAE,SAAS;YACrB,MAAM,MAAM,GAAG,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;YAC/B,IAAI,MAAM,IAAI,KAAK,CAAC,KAAK,CAAC,gBAAgB;gBAAE,SAAS;YACrD,MAAM,IAAI,GAAG,WAAW,GAAG,MAAM,GAAG,KAAK,CAAC,KAAK,CAAC,IAAI,CAAC;YACrD,IAAI,IAAI,KAAK,QAAQ,EAAE,CAAC;gBACtB,sEAAsE;gBACtE,IAAI,CAAC,WAAW,CAAC,IAAI,EAAE,QAAQ,CAAC;oBAAE,SAAS;gBAC3C,IAAI,KAAK,CAAC,UAAU,CAAC,WAAW,EAAE,MAAM,CAAC,KAAK,YAAY;oBAAE,SAAS;YACvE,CAAC;YACD,OAAO,CAAC,CAAC,CAAC,GAAG,MAAM,GAAG,CAAC,CAAC;YACxB,qEAAqE;YACrE,IACE,CAAC,mBAAmB,CAAC,QAAQ,EAAE,KAAK,CAAC,YAAY,EAAE,KAAK,CAAC,UAAU,EAAE,YAAY,CAAC,KAAK,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC,EACpG,CAAC;gBACD,SAAS;YACX,CAAC;YACD,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,KAAK,CAAC,KAAK,CAAC,QAAQ,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;gBACrD,GAAG,CAAC,IAAI,CAAC,EAAE,KAAK,EAAE,UAAU,EAAE,CAAC,EAAE,MAAM,EAAE,OAAO,EAAE,CAAC,EAAE,CAAC,CAAC;YACzD,CAAC;QACH,CAAC;QACD,IAAI,GAAG,CAAC,MAAM,KAAK,CAAC;YAAE,SAAS;QAC/B,IAAI,GAAG,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;YACnB,GAAG,CAAC,IAAI,CACN,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CACP,CAAC,CAAC,CAAC,KAAK,CAAC,KAAK,CAAC,QAAQ,CAAC,CAAC,CAAC,OAAO,CAAC,EAAE,MAAM,CAAC,KAAK,IAAI,CAAC,CAAC;gBACtD,CAAC,CAAC,CAAC,KAAK,CAAC,KAAK,CAAC,QAAQ,CAAC,CAAC,CAAC,OAAO,CAAC,EAAE,MAAM,CAAC,KAAK,IAAI,CAAC,CAAC,CACzD,CAAC;QACJ,CAAC;QAED,KAAK,MAAM,IAAI,IAAI,GAAG,EAAE,CAAC;YACvB,MAAM,OAAO,GAAG,IAAI,CAAC,KAAK,CAAC,KAAK,CAAC,QAAQ,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;YACxD,MAAM,MAAM,GAAG,IAAI,CAAC,KAAK,CAAC,UAAU,CAAC,IAAI,CAAC,OAAO,CAAC,CAAC;YACnD,IAAI,CAAC,OAAO,IAAI,CAAC,MAAM;gBAAE,SAAS;YAClC,IAAI,MAAM,CAAC,MAAM;gBAAE,OAAO;YAC1B,MAAM,CAAC,QAAQ,CACb,GAAG,IAAI,CAAC,KAAK,CAAC,UAAU,CAAC,WAAW,EAAE,IAAI,CAAC,MAAM,CAAC,IAAI,cAAc,CAAC,OAAO,CAAC,MAAM,CAAC,GAAG;gBACrF,GAAG,MAAM,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAK,EAAE,aAAa,EAAE,OAAO,CAAC,MAAM,EAAE,IAAI,CAAC,MAAM,CAAC,CAAC,EAAE,CAChF,CAAC;YACF,IAAI,CAAC,KAAK,CAAC,IAAI,EAAE,CAAC;YAClB,+EAA+E;YAC/E,IAAI,MAAM,CAAC,IAAI;gBAAE,MAAM,MAAM,CAAC,KAAK,EAAE,CAAC;QACxC,CAAC;IACH,CAAC;AACH,CAAC;AAED,KAAK,UAAU,gBAAgB,CAC7B,IAAa,EACb,IAAoB,EACpB,IAAiB,EACjB,YAAiC,EACjC,OAAuB;IAEvB,MAAM,EAAE,YAAY,EAAE,UAAU,EAAE,WAAW,EAAE,SAAS,EAAE,GAAG,IAAI,CAAC,KAAK,CAAC;IACxE,MAAM,EAAE,cAAc,EAAE,GAAG,IAAI,CAAC,MAAM,CAAC;IACvC,IAAI,WAAW,GAAG,CAAC,CAAC;IAEpB;;;;;;;MAOE;IACF,MAAM,SAAS,GAAG,GAAY,EAAE,CAAC,IAAI,CAAC,MAAM,GAAG,CAAC,IAAI,IAAI,CAAC,KAAK,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,MAAM,CAAC,MAAM,CAAC,CAAC;IAE/F,IAAI,KAAK,EAAE,MAAM,KAAK,IAAI,IAAI,CAAC,WAAW,CAAC,EAAE,WAAW,EAAE,SAAS,EAAE,CAAC,EAAE,CAAC;QACvE,IAAI,SAAS,EAAE;YAAE,MAAM;QACvB,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,KAAK,CAAC,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;YAC3C,IAAI,SAAS,EAAE;gBAAE,MAAM;YACvB,MAAM,KAAK,GAAG,KAAK,CAAC,gBAAgB,GAAG,CAAC,CAAC;YACzC,MAAM,WAAW,GAAG,YAAY,CAAC,CAAC,CAAC,CAAC,YAAY,CAAC,KAAK,CAAC,IAAI,KAAK,GAAG,cAAc,CAAC,CAAC,CAAC,CAAC,KAAK,GAAG,cAAc,CAAC;YAE5G,IAAI,IAAI,CAAC,MAAM,KAAK,MAAM,EAAE,CAAC;gBAC3B,MAAM,eAAe,CAAC,IAAI,EAAE,IAAI,EAAE,KAAK,EAAE,CAAC,EAAE,WAAW,EAAE,IAAI,CAAC,KAAK,CAAC,CAAC;gBACrE,WAAW,EAAE,CAAC;gBACd,SAAS;YACX,CAAC;YAED,KAAK,MAAM,KAAK,IAAI,IAAI,EAAE,CAAC;gBACzB,MAAM,EAAE,KAAK,EAAE,MAAM,EAAE,UAAU,EAAE,UAAU,EAAE,GAAG,KAAK,CAAC;gBACxD,MAAM,EAAE,QAAQ,EAAE,IAAI,EAAE,GAAG,KAAK,CAAC;gBACjC,8DAA8D;gBAC9D,MAAM,KAAK,GAAG,YAAY,CAAC,IAAI,CAAC,CAAC;gBAEjC,KAAK,IAAI,MAAM,GAAG,CAAC,EAAE,MAAM,GAAG,KAAK,CAAC,gBAAgB,EAAE,MAAM,EAAE,EAAE,CAAC;oBAC/D,MAAM,IAAI,GAAG,WAAW,GAAG,MAAM,GAAG,IAAI,CAAC;oBACzC,IAAI,CAAC,mBAAmB,CAAC,IAAI,EAAE,YAAY,EAAE,UAAU,EAAE,KAAK,CAAC;wBAAE,SAAS;oBAE1E,IAAI,GAAG,GAAG,UAAU,CAAC,WAAW,EAAE,MAAM,CAAC,CAAC;oBAC1C,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,QAAQ,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;wBACzC,MAAM,OAAO,GAAG,QAAQ,CAAC,CAAC,CAAC,CAAC;wBAC5B,MAAM,MAAM,GAAG,UAAU,CAAC,CAAC,CAAC,CAAC;wBAC7B,IAAI,CAAC,OAAO,IAAI,CAAC,MAAM;4BAAE,SAAS;wBAClC,GAAG,IAAI,GAAG,GAAG,MAAM,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAK,EAAE,CAAC,EAAE,OAAO,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC,CAAC;oBACvE,CAAC;oBACD,IAAI,MAAM,CAAC,MAAM;wBAAE,MAAM;oBACzB,MAAM,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC;oBACrB,KAAK,CAAC,IAAI,EAAE,CAAC;oBAEb;;;;;;;;;;;;sBAYE;oBACF,IAAI,MAAM,CAAC,IAAI;wBAAE,MAAM,MAAM,CAAC,KAAK,EAAE,CAAC;gBACxC,CAAC;gBACD,MAAM,MAAM,CAAC,UAAU,EAAE,CAAC;YAC5B,CAAC;YAED,WAAW,EAAE,CAAC;QAChB,CAAC;QAED,IAAI,OAAO,CAAC,UAAU,EAAE,CAAC;YACvB;;;;;;;;;;;cAWE;YACF,IAAI,CAAC;gBACH,OAAO,CAAC,UAAU,CAAC;oBACjB,WAAW;oBACX,YAAY,EAAE,SAAS,GAAG,WAAW;oBACrC,4EAA4E;oBAC5E,wDAAwD;oBACxD,YAAY,EAAE,CAAC,GAAG,IAAI,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,MAAM,CAClE,CAAC,GAAG,EAAE,KAAK,EAAE,EAAE,CAAC,GAAG,GAAG,KAAK,CAAC,YAAY,EACxC,CAAC,CACF;iBACF,CAAC,CAAC;YACL,CAAC;YAAC,OAAO,KAAK,EAAE,CAAC;gBACf,MAAM,IAAI,eAAe,CACvB,iBAAiB,EACjB,kCAAkC,KAAK,YAAY,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,EAAE,EAC1F,qFAAqF;oBACnF,+DAA+D,EACjE,EAAE,KAAK,EAAE,CACV,CAAC;YACJ,CAAC;QACH,CAAC;IACH,CAAC;IAED,MAAM,MAAM,GAAG,IAAI,GAAG,EAAsB,CAAC;IAC7C,KAAK,MAAM,KAAK,IAAI,IAAI,EAAE,CAAC;QACzB,IAAI,MAAM,CAAC,GAAG,CAAC,KAAK,CAAC,MAAM,CAAC;YAAE,SAAS;QACvC,MAAM,CAAC,GAAG,CAAC,KAAK,CAAC,MAAM,CAAC,CAAC;QACzB,IAAI,CAAC;YACH,MAAM,KAAK,CAAC,MAAM,CAAC,GAAG,EAAE,CAAC;YACzB,uFAAuF;YACvF,sFAAsF;YACtF,4DAA4D;YAC5D,MAAM,KAAK,CAAC,OAAO,CAAC;QACtB,CAAC;gBAAS,CAAC;YACT,6EAA6E;YAC7E,qFAAqF;YACrF,sEAAsE;YACtE,KAAK,CAAC,OAAO,EAAE,CAAC;QAClB,CAAC;IACH,CAAC;IAED,wFAAwF;IACxF,IAAI,IAAI,CAAC,MAAM,KAAK,MAAM,EAAE,CAAC;QAC3B,MAAM,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC;QACtB,IAAI,CAAC,KAAK;YAAE,OAAO,EAAE,CAAC;QACtB,OAAO,CAAC,EAAE,IAAI,EAAE,KAAK,CAAC,KAAK,CAAC,QAAQ,EAAE,IAAI,EAAE,IAAI,CAAC,MAAM,CAAC,CAAC,GAAG,EAAE,CAAC,EAAE,EAAE,CAAC,GAAG,GAAG,CAAC,CAAC,IAAI,EAAE,CAAC,CAAC,EAAE,CAAC,CAAC;IAC1F,CAAC;IACD,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,KAAK,EAAE,EAAE,CAAC,CAAC,EAAE,IAAI,EAAE,KAAK,CAAC,KAAK,CAAC,QAAQ,EAAE,IAAI,EAAE,KAAK,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC;AACjF,CAAC;AAED;;;;;;;GAOG;AACH,SAAS,UAAU,CACjB,MAAgB,EAChB,IAAa;IAEb,IAAI,CAAC,IAAI;QAAE,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,OAAO,EAAE,OAAO,CAAC,OAAO,EAAE,EAAE,OAAO,EAAE,GAAS,EAAE,GAAE,CAAC,EAAE,CAAC;IAC1F,MAAM,UAAU,GAAG,UAAU,EAAE,CAAC;IAChC;;;;;;;;;;;;;;MAcE;IACF,MAAM,OAAO,GAAG,CAAC,KAAY,EAAQ,EAAE;QACrC,UAAU,CAAC,OAAO,CAAC,KAAK,CAAC,CAAC;IAC5B,CAAC,CAAC;IACF,MAAM,CAAC,EAAE,CAAC,OAAO,EAAE,OAAO,CAAC,CAAC;IAC5B,MAAM,OAAO,GAAG,GAAS,EAAE;QACzB,IAAI,MAAM,KAAK,OAAO,CAAC,MAAM,IAAI,MAAM,KAAK,OAAO,CAAC,MAAM;YAAE,MAAM,CAAC,GAAG,CAAC,OAAO,EAAE,OAAO,CAAC,CAAC;IAC3F,CAAC,CAAC;IAEF;;;;;MAKE;IACF,MAAM,QAAQ,GAAG,MAAM,KAAK,OAAO,CAAC,MAAM,CAAC;IAC3C,UAAU,CAAC,IAAI,CAAC,MAAM,EAAE,EAAE,GAAG,EAAE,CAAC,QAAQ,EAAE,CAAC,CAAC;IAC5C,IAAI,QAAQ,EAAE,CAAC;QACb;;;;;;;;;;;;;;;;UAgBE;QACF,MAAM,OAAO,GAAG,QAAQ,CAAC,UAAU,CAAC,CAAC,KAAK,CAAC,CAAC,KAAc,EAAE,EAAE;YAC5D;;;;;;;;cAQE;YACF,IAAK,KAAsC,EAAE,IAAI,KAAK,OAAO;gBAAE,OAAO;YACtE,MAAM,KAAK,CAAC;QACd,CAAC,CAAC,CAAC;QACH,OAAO,CAAC,KAAK,CAAC,GAAG,EAAE,GAAE,CAAC,CAAC,CAAC;QACxB,OAAO,EAAE,MAAM,EAAE,UAAU,EAAE,OAAO,EAAE,OAAO,EAAE,OAAO,EAAE,CAAC;IAC3D,CAAC;IAED;;;;;;;;;MASE;IACF,MAAM,OAAO,GAAG,QAAQ,CAAC,MAAM,CAAC,CAAC;IACjC,OAAO,CAAC,KAAK,CAAC,GAAG,EAAE,GAAE,CAAC,CAAC,CAAC;IACxB,OAAO,EAAE,MAAM,EAAE,UAAU,EAAE,OAAO,EAAE,OAAO,EAAE,CAAC;AAClD,CAAC;AAED;;;;;;;GAOG;AACH,KAAK,UAAU,eAAe,CAC5B,SAAiB,EACjB,IAAY,EACZ,QAAgB,EAChB,IAAI,GAAG,KAAK,EACZ,GAAG,GAAG,KAAK;IAEX,qFAAqF;IACrF,oFAAoF;IACpF,IAAI,GAAG;QAAE,QAAQ,GAAG,QAAQ,GAAG,QAAQ,CAAC;IACxC,IAAI,CAAC;QACH,uFAAuF;QACvF,iFAAiF;QACjF,MAAM,SAAS,CAAC,IAAI,CAAC,IAAI,CAAC,SAAS,EAAE,IAAI,CAAC,EAAE,IAAI,CAAC,CAAC,CAAC,QAAQ,CAAC,QAAQ,CAAC,CAAC,CAAC,CAAC,QAAQ,EAAE,IAAI,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC;IAC/G,CAAC;IAAC,OAAO,KAAK,EAAE,CAAC;QACf,MAAM,MAAM,GAAG,KAAK,YAAY,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC;QACtE,MAAM,IAAI,eAAe,CACvB,cAAc,EACd,YAAY,IAAI,SAAS,SAAS,aAAa,MAAM,EAAE,EACvD,SAAS,CAAC,KAAK,CAAC,CACjB,CAAC;IACJ,CAAC;AACH,CAAC;AAED,KAAK,UAAU,gBAAgB,CAC7B,SAAiB,EACjB,IAAa,EACb,IAAoB,EACpB,IAAa,EACb,GAAY;IAEZ,MAAM,eAAe,GAAG,IAAI,GAAG,CAAC,IAAI,CAAC,MAAM,CAAC,OAAO,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC;IACnG,MAAM,OAAO,GAAG,IAAI,GAAG,EAAkB,CAAC;IAC1C,KAAK,MAAM,KAAK,IAAI,IAAI,CAAC,MAAM,EAAE,CAAC;QAChC,KAAK,MAAM,OAAO,IAAI,KAAK,CAAC,QAAQ;YAAE,OAAO,CAAC,GAAG,CAAC,OAAO,CAAC,MAAM,CAAC,KAAK,EAAE,KAAK,CAAC,QAAQ,CAAC,CAAC;IAC1F,CAAC;IAED,MAAM,KAAK,GAAG;QACZ,MAAM,CAAC;YACL,QAAQ;YACR,cAAc;YACd,OAAO;YACP,MAAM;YACN,kBAAkB;YAClB,oBAAoB;YACpB,cAAc;YACd,cAAc;YACd,aAAa;YACb,aAAa;YACb,YAAY;YACZ,cAAc;YACd,aAAa;YACb,WAAW;SACZ,CAAC;KACH,CAAC;IAEF,KAAK,MAAM,MAAM,IAAI,IAAI,CAAC,MAAM,CAAC,OAAO,EAAE,CAAC;QACzC,IAAI,MAAM,CAAC,aAAa;YAAE,SAAS;QACnC,MAAM,MAAM,GAAG,IAAI,CAAC,WAAW,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,UAAU,MAAM,CAAC,KAAK,EAAE,CAAC;QAC9E,KAAK,CAAC,IAAI,CACR,MAAM,CAAC;YACL,MAAM;YACN,MAAM,CAAC,MAAM,CAAC,KAAK,CAAC;YACpB,MAAM,CAAC,KAAK;YACZ,MAAM,CAAC,iBAAiB;YACxB,MAAM,CAAC,MAAM,CAAC,YAAY,CAAC;YAC3B,MAAM,CAAC,MAAM,CAAC,gBAAgB,CAAC;YAC/B,MAAM,CAAC,MAAM,CAAC,WAAW,CAAC;YAC1B,MAAM,CAAC,MAAM,CAAC,WAAW,CAAC;YAC1B,MAAM,CAAC,MAAM,CAAC,UAAU,CAAC;YACzB,MAAM,CAAC,MAAM,CAAC,UAAU,CAAC;YACzB,MAAM,CAAC,UAAU;YACjB,MAAM,CAAC,YAAY;YACnB,OAAO,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,EAAE;YAC/B,eAAe,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,IAAI;SACjD,CAAC,CACH,CAAC;IACJ,CAAC;IAED,MAAM,IAAI,GAAG,IAAI,CAAC,CAAC,CAAC,iBAAiB,CAAC,CAAC,CAAC,cAAc,CAAC;IACvD,MAAM,eAAe,CAAC,SAAS,EAAE,IAAI,EAAE,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,GAAG,IAAI,EAAE,IAAI,EAAE,GAAG,CAAC,CAAC;IAC3E,OAAO,EAAE,IAAI,EAAE,IAAI,EAAE,KAAK,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;AAC1C,CAAC;AAED;;;;;;;;;;;;;;;;;;;EAmBE;AACF,SAAS,yBAAyB,CAChC,OAAuB,EACvB,cAAsB;IAEtB,MAAM,IAAI,GAAG,OAAO,CAAC,KAAK,IAAI,CAAC,QAAQ,CAAC;IACxC,MAAM,EAAE,GACN,OAAO,CAAC,GAAG,KAAK,SAAS;QACvB,CAAC,CAAC,OAAO,CAAC,GAAG;QACb,CAAC,CAAC,OAAO,CAAC,QAAQ,KAAK,SAAS;YAC9B,CAAC,CAAC,CAAC,OAAO,CAAC,KAAK,IAAI,cAAc,CAAC,GAAG,OAAO,CAAC,QAAQ;YACtD,CAAC,CAAC,QAAQ,CAAC;IACjB,OAAO,EAAE,IAAI,EAAE,EAAE,EAAE,CAAC;AACtB,CAAC;AAED,KAAK,UAAU,mBAAmB,CAChC,SAAiB,EACjB,WAAkC,EAClC,MAAoC,EACpC,IAAa,EACb,GAAY;IAEZ,MAAM,QAAQ,GAAG,WAAW;SACzB,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,KAAK,IAAI,MAAM,CAAC,IAAI,IAAI,CAAC,CAAC,KAAK,GAAG,MAAM,CAAC,EAAE,CAAC;SAC5D,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,KAAK,IAAI,CAAC,CAAC,WAAW,GAAG,CAAC,CAAC,WAAW,CAAC,CAAC;IAEtE,MAAM,KAAK,GAAG,CAAC,MAAM,CAAC,CAAC,SAAS,EAAE,YAAY,EAAE,aAAa,EAAE,cAAc,CAAC,CAAC,CAAC,CAAC;IACjF,KAAK,MAAM,UAAU,IAAI,QAAQ,EAAE,CAAC;QAClC,KAAK,CAAC,IAAI,CACR,MAAM,CAAC;YACL,MAAM,CAAC,UAAU,CAAC,KAAK,CAAC;YACxB,UAAU,CAAC,QAAQ,KAAK,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,UAAU,CAAC,QAAQ,CAAC;YAC/D,UAAU,CAAC,IAAI;YACf,MAAM,CAAC,UAAU,CAAC,WAAW,CAAC;SAC/B,CAAC,CACH,CAAC;IACJ,CAAC;IAED,MAAM,IAAI,GAAG,IAAI,CAAC,CAAC,CAAC,oBAAoB,CAAC,CAAC,CAAC,iBAAiB,CAAC;IAC7D,MAAM,eAAe,CAAC,SAAS,EAAE,IAAI,EAAE,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,GAAG,IAAI,EAAE,IAAI,EAAE,GAAG,CAAC,CAAC;IAC3E,OAAO,EAAE,IAAI,EAAE,IAAI,EAAE,QAAQ,CAAC,MAAM,EAAE,CAAC;AACzC,CAAC;AAED;;;;;;;;;;;;GAYG;AACH,SAAS,SAAS,CAAC,KAAc,EAAE,QAAQ,GAAG,KAAK;IACjD;;;;;;;MAOE;IACF,MAAM,QAAQ,GAAG,QAAQ;QACvB,CAAC,CAAC,6EAA6E;QAC/E,CAAC,CAAC,kEAAkE,CAAC;IACvE,MAAM,SAAS,GAAG,QAAQ,CAAC,CAAC,CAAC,4BAA4B,CAAC,CAAC,CAAC,2BAA2B,CAAC;IACxF,MAAM,IAAI,GAAI,KAAsC,EAAE,IAAI,CAAC;IAC3D,QAAQ,IAAI,EAAE,CAAC;QACb,KAAK,QAAQ;YACX,OAAO,GAAG,QAAQ,oDAAoD,SAAS,GAAG,CAAC;QACrF,KAAK,QAAQ;YACX,OAAO,GAAG,QAAQ,oDAAoD,SAAS,GAAG,CAAC;QACrF,KAAK,QAAQ,CAAC;QACd,KAAK,OAAO;YACV,OAAO,GAAG,QAAQ,8CAA8C,SAAS,GAAG,CAAC;QAC/E,KAAK,OAAO;YACV,OAAO,GAAG,QAAQ,yCAAyC,SAAS,GAAG,CAAC;QAC1E,KAAK,QAAQ;YACX,OAAO,GAAG,QAAQ,2EAA2E,SAAS,GAAG,CAAC;QAC5G,KAAK,QAAQ;YACX,OAAO,GAAG,QAAQ,iGAAiG,CAAC;QACtH,KAAK,cAAc;YACjB,OAAO,GAAG,QAAQ,mDAAmD,QAAQ,CAAC,CAAC,CAAC,+BAA+B,CAAC,CAAC,CAAC,yCAAyC,GAAG,CAAC;QACjK,KAAK,QAAQ,CAAC;QACd,KAAK,QAAQ;YACX,OAAO,GAAG,QAAQ,yHAAyH,CAAC;QAC9I,KAAK,OAAO;YACV,OAAO,GAAG,QAAQ,2EAA2E,CAAC;QAChG;YACE,OAAO,GAAG,QAAQ,qDAAqD,CAAC;IAC5E,CAAC;AACH,CAAC;AAED;;;;;;;;;;;;;;;;;;;GAmBG;AACH,SAAS,WAAW;IAClB,IAAI,SAAiB,CAAC;IACtB,IAAI,CAAC;QACH,MAAM,IAAI,GAAG,SAAS,CAAC,CAAC,CAAC,CAAC;QAC1B,IAAI,CAAC,IAAI,CAAC,MAAM,EAAE;YAAE,OAAO,IAAI,CAAC;QAChC,SAAS,GAAG,IAAI,CAAC,IAAI,CAAC;IACxB,CAAC;IAAC,MAAM,CAAC;QACP,uFAAuF;QACvF,OAAO,IAAI,CAAC;IACd,CAAC;IAED,IAAI,QAAQ,GAAG,CAAC,CAAC;IACjB,OAAO;QACL,KAAK,EAAE,CAAC,KAAa,EAAQ,EAAE;YAC7B,QAAQ,IAAI,KAAK,CAAC;QACpB,CAAC;QACD,MAAM,EAAE,GAAS,EAAE;YACjB,IAAI,MAAc,CAAC;YACnB,IAAI,CAAC;gBACH,MAAM,GAAG,SAAS,CAAC,CAAC,CAAC,CAAC,IAAI,GAAG,SAAS,CAAC;YACzC,CAAC;YAAC,MAAM,CAAC;gBACP,OAAO;YACT,CAAC;YACD,IAAI,MAAM,IAAI,QAAQ;gBAAE,OAAO;YAC/B,MAAM,IAAI,eAAe,CACvB,cAAc,EACd,6BAA6B,QAAQ,GAAG,MAAM,OAAO,QAAQ,uBAAuB;gBAClF,iEAAiE,EACnE,+EAA+E;gBAC7E,gFAAgF;gBAChF,qFAAqF,CACxF,CAAC;QACJ,CAAC;KACF,CAAC;AACJ,CAAC;AAED,qFAAqF;AACrF,SAAS,MAAM,CAAC,OAA+B;IAC7C,OAAO,OAAO,CAAC,MAAM,CAAC,CAAC,KAAK,EAAE,IAAI,EAAE,EAAE,CAAC,KAAK,GAAG,IAAI,CAAC,IAAI,EAAE,CAAC,CAAC,CAAC;AAC/D,CAAC;AAGD,mFAAmF;AACnF,SAAS,YAAY,CAAC,WAAoB;IACxC,OAAO;QACL,IAAI,EAAE,eAAe;QACrB,QAAQ,EAAE,SAAS;QACnB,OAAO,EACL,oFAAoF;YACpF,uDAAuD;QACzD,IAAI,EAAE,WAAW;YACf,CAAC,CAAC,iFAAiF;gBACjF,qDAAqD;YACvD,CAAC,CAAC,mEAAmE;KACxE,CAAC;AACJ,CAAC;AAED,KAAK,UAAU,aAAa,CAC1B,SAAiB,EACjB,SAAiB,EACjB,IAAa,EACb,IAAoB,EACpB,OAA+B,EAC/B,eAAuB;AACvB,uFAAuF;AACvF,QAAuB;IAEvB,MAAM,EAAE,MAAM,EAAE,GAAG,IAAI,CAAC;IAExB;;;;;;;;;;;;;;MAcE;IACF,MAAM,QAAQ,GAAG;QACf,IAAI,EAAE,EAAE,IAAI,EAAE,SAAS,EAAE,OAAO,EAAE,YAAY,EAAE;QAChD,MAAM,EAAE;YACN,IAAI,EAAE,IAAI,CAAC,OAAO,CAAC,SAAS,CAAC;YAC7B,KAAK,EAAE,IAAI,CAAC,QAAQ;YACpB,QAAQ,EAAE,IAAI,IAAI,CAAC,IAAI,CAAC,gBAAgB,CAAC,CAAC,WAAW,EAAE;YACvD,MAAM,EAAE,QAAQ;SACjB;QACD,SAAS,EAAE;YACT,MAAM,EAAE,cAAc,CAAC,MAAM,CAAC;YAC9B,OAAO,EAAE,MAAM,CAAC,OAAO;YACvB,UAAU,EAAE,MAAM,CAAC,SAAS;YAC5B,YAAY,EAAE,MAAM,CAAC,WAAW;YAChC,6EAA6E;YAC7E,oBAAoB,EAAE,eAAe,CAAC,MAAM,CAAC,aAAa,CAAC;YAC3D,cAAc,EAAE,MAAM,CAAC,YAAY;YACnC,cAAc,EAAE,MAAM,CAAC,YAAY;YACnC,YAAY,EAAE,IAAI,CAAC,WAAW;YAC9B,qBAAqB,EAAE,MAAM,CAAC,mBAAmB;YACjD,uBAAuB,EAAE,MAAM,CAAC,cAAc;YAC9C,gBAAgB,EAAE,IAAI,CAAC,eAAe;YACtC,YAAY,EAAE,MAAM,CAAC,WAAW;YAChC,mBAAmB,EAAE,IAAI,CAAC,iBAAiB,CAAC,MAAM;SACnD;QACD,UAAU,EAAE;YACV,YAAY,EAAE,IAAI,IAAI,EAAE,CAAC,WAAW,EAAE;YACtC,aAAa,EAAE,IAAI,CAAC,KAAK,CAAC,YAAY;YACtC,WAAW,EAAE,IAAI,CAAC,KAAK,CAAC,UAAU;YAClC,eAAe,EAAE,IAAI,CAAC,KAAK,CAAC,gBAAgB;YAC5C,iBAAiB,EAAE,CAAC,IAAI,CAAC,KAAK,CAAC,WAAW,EAAE,IAAI,CAAC,KAAK,CAAC,SAAS,CAAC;YACjE,mBAAmB,EAAE,eAAe;YACpC;;;;;;;;;;cAUE;YACF,MAAM,EAAE,IAAI,CAAC,MAAM;YACnB,KAAK,EAAE,OAAO,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,EAAE,IAAI,EAAE,CAAC,CAAC,IAAI,EAAE,IAAI,EAAE,CAAC,CAAC,IAAI,EAAE,CAAC,CAAC;YAC3D,WAAW,EAAE,IAAI,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;gBACnC,IAAI,EAAE,CAAC,CAAC,QAAQ;gBAChB,gBAAgB,EAAE,CAAC,CAAC,IAAI;gBACxB,QAAQ,EAAE,CAAC,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC;gBACzC,QAAQ,EAAE,CAAC,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,QAAQ,CAAC;aAC5C,CAAC,CAAC;SACJ;QACD,KAAK,EAAE,CAAC,GAAG,sBAAsB,CAAC,IAAI,CAAC,WAAW,CAAC,EAAE,GAAG,IAAI,CAAC,WAAW,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;YACpF,IAAI,EAAE,CAAC,CAAC,IAAI;YACZ,QAAQ,EAAE,CAAC,CAAC,QAAQ;YACpB,OAAO,EAAE,CAAC,CAAC,OAAO;SACnB,CAAC,CAAC;KACJ,CAAC;IAEF,MAAM,eAAe,CAAC,SAAS,EAAE,eAAe,EAAE,IAAI,CAAC,SAAS,CAAC,QAAQ,EAAE,IAAI,EAAE,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC;AAC9F,CAAC","sourcesContent":["/**\n * Executing a conversion.\n *\n * Everything is written in a single pass over the data records. All rate groups are\n * open at once and fed from the same batch of bytes, so a file is read once no\n * matter how many output tables it produces, and memory stays flat.\n */\n\nimport { createWriteStream, fstatSync } from 'node:fs';\nimport { mkdir, readdir, stat, writeFile } from 'node:fs/promises';\nimport { createHash } from 'node:crypto';\nimport { createReadStream } from 'node:fs';\nimport { finished, pipeline } from 'node:stream/promises';\nimport type { Writable } from 'node:stream';\nimport { createGzip, gzipSync } from 'node:zlib';\nimport path from 'node:path';\n\nimport type { RecordBatch } from '../edf/reader.js';\nimport { EdfFile } from '../edf/reader.js';\nimport { describeFormat, formatRates, formatWallClock } from '../edf/header.js';\nimport type { Diagnostic } from '../edf/errors.js';\nimport { EdfError } from '../edf/errors.js';\nimport type { Annotation } from '../edf/annotations.js';\nimport {\n  BufferedLineWriter,\n  DEFAULT_FLUSH_THRESHOLD,\n  UTF8_BOM,\n  csvRow,\n  escapeCsvField,\n} from '../format/csv.js';\nimport { listed } from '../format/list.js';\nimport {\n  fixed,\n  makeSampleFormatter,\n  makeTimeFormatter,\n  newOffsetBudget,\n  newSampleCacheBudget,\n} from '../format/number.js';\nimport type { SampleFormatter } from '../format/number.js';\nimport { buildPlan, withoutFileRateWarning } from './plan.js';\nimport type { ConversionPlan, PlanOptions, RateGroup } from './plan.js';\nimport { deriveRecordStarts } from './timing.js';\nimport { sampleTimeIsInRange, toleranceFor } from './time-range.js';\nimport { VERSION as TOOL_VERSION } from '../version.js';\n\nexport { TOOL_VERSION };\n\nexport type ConversionErrorCode =\n  | 'OUTPUT_EXISTS'\n  | 'OUTPUT_UNWRITABLE'\n  | 'INPUT_OUTPUT_COLLISION'\n  | 'INPUT_UNREADABLE'\n  | 'UNSUPPORTED_REQUEST'\n  | 'CALLBACK_FAILED'\n  | 'WRITE_FAILED';\n\n/**\n * Codes that mean the command cannot be carried out as written, rather than that something\n * about the file or the destination went wrong.\n *\n * The distinction is the one the exit codes draw: 1 is \"the file or the destination is the\n * problem\", 2 is \"the command line is the problem\". A caller with a `--stdout` conflict is\n * being told to change the flags — the hints say exactly that — so filing it under 1 sent\n * scripts looking at the disk. Exit 2 already covers checks that need the header first,\n * such as a `--channels` term matching nothing.\n */\nexport const USAGE_ERROR_CODES: ReadonlySet<ConversionErrorCode> = new Set(['UNSUPPORTED_REQUEST']);\n\nexport class ConversionError extends Error {\n  readonly code: ConversionErrorCode;\n  readonly hint: string | undefined;\n  constructor(code: ConversionErrorCode, message: string, hint?: string, options?: ErrorOptions) {\n    super(message, options);\n    this.name = 'ConversionError';\n    this.code = code;\n    this.hint = hint;\n  }\n}\n\nexport interface ConvertOptions extends PlanOptions {\n  /** Destination directory. Defaults to the input file's name without its extension. */\n  outputDir?: string | undefined;\n  /** Overwrite an existing output directory. */\n  force?: boolean | undefined;\n  /** Record a SHA-256 of the input in metadata.json. Costs one extra read of the file. */\n  checksum?: boolean | undefined;\n  /**\n   * Write the signal CSV to stdout instead of to a directory.\n   *\n   * Only valid when the conversion produces exactly one signal file. In the default wide\n   * layout a mixed-rate recording becomes several tables, and merging them into one stream\n   * would mean inventing the samples this tool exists not to invent; `layout: 'long'` gives\n   * one table for any recording, so it lifts the restriction. No sidecar files are written.\n   */\n  toStdout?: boolean | undefined;\n  onProgress?: ((progress: ConversionProgress) => void) | undefined;\n}\n\nexport interface ConversionProgress {\n  recordsDone: number;\n  recordsTotal: number;\n  bytesWritten: number;\n}\n\nexport interface WrittenFile {\n  name: string;\n  rows: number;\n}\n\nexport interface ConvertResult {\n  outputDir: string;\n  files: WrittenFile[];\n  /**\n   * True when a `--stdout` reader closed the pipe before the conversion finished.\n   *\n   * `edf2csv rec.edf --stdout | head -1` is an ordinary thing to type and not a failure, but\n   * it is also not a conversion: the row count is rows formatted before the close was\n   * noticed, which is neither the recording's total nor what the reader received.\n   */\n  readerHungUp: boolean;\n  annotationCount: number;\n  diagnostics: Diagnostic[];\n  plan: ConversionPlan;\n  file: EdfFile;\n  elapsedMs: number;\n}\n\ninterface OpenGroup {\n  group: RateGroup;\n  writer: BufferedLineWriter;\n  formatters: SampleFormatter[];\n  formatTime: (recordStart: number, sample: number) => string;\n  rows: number;\n  /** Resolves once a compressed stream's bytes have reached the file behind it. */\n  settled: Promise<void>;\n  /** Detaches the compressor's error forwarding from a stream this tool does not own. */\n  release: () => void;\n}\n\nexport async function convert(inputPath: string, options: ConvertOptions = {}): Promise<ConvertResult> {\n  const startedAt = Date.now();\n  const file = await EdfFile.open(inputPath);\n\n  try {\n    /*\n      Hashed before a record is read, and only published if the file held still.\n\n      A checksum taken afterwards cannot be trusted whichever descriptor it goes through. A\n      file overwritten in place keeps its inode, so the open handle sees the new bytes too,\n      and the old ones are simply gone — there is nowhere left to read what was converted.\n      Taking it first at least means the hash describes the file the header was read from.\n\n      What makes it a guarantee rather than a hope is the check at the end: if size or\n      modification time moved at any point, the hash is dropped and the run says why. So\n      `sha256` present means the file demonstrably did not change while it was read, and a\n      recording still being written gets a null and a warning instead of a plausible hash of\n      the wrong bytes. (A change reverted within the same modification timestamp would slip\n      through; nothing short of copying the input first can close that.)\n    */\n    const checksumAtOpen = options.checksum === true ? await file.sha256() : null;\n\n    // One pass over the annotation channel supplies everything annotation-related:\n    // where each record sits in time, and the full event list. It reads the whole\n    // file even when a window was requested, because an annotation inside the window\n    // may be stored in a record outside it.\n    const annotationData =\n      file.annotationSignals.length > 0\n        ? await file.readAnnotations()\n        : { annotations: [] as Annotation[], recordStarts: [] as (number | null)[], malformed: 0 };\n\n    const timing = deriveRecordStarts(file, annotationData);\n\n    const plan = buildPlan(\n      {\n        signals: file.header.signals,\n        recordDuration: file.header.recordDuration,\n        recordCount: file.recordCount,\n        hasAnnotationChannel: file.annotationSignals.length > 0,\n        recordStarts: timing.starts,\n      },\n      options,\n    );\n    plan.diagnostics.push(...timing.diagnostics);\n\n    if (options.toStdout === true) {\n      if (!plan.writeSignals) {\n        throw new ConversionError(\n          'UNSUPPORTED_REQUEST',\n          '--stdout has no signal data to write because --annotations-only was given.',\n          'Drop one of the two flags.',\n        );\n      }\n      /*\n        No table at all is its own answer, and neither layout gave it.\n\n        A recording with no signal channels — one holding only EDF+ annotations — produced\n        zero rate groups. The wide layout then said \"--stdout needs exactly one table, but\n        this recording produces 0, one for each sampling rate its channels use ()\", with an\n        empty parenthetical, advice to narrow to one of no rates, and advice to use\n        `--layout long` — which wrote zero bytes to stdout, not even a header row, and exited\n        0 while warning that \"the signal files hold their headers and no data\". There were no\n        files and there was no header. The one path that was right about this is\n        `--annotations-only`, which refuses outright, and this is the same situation reached\n        by a different route.\n      */\n      if (plan.groups.length === 0) {\n        throw new ConversionError(\n          'UNSUPPORTED_REQUEST',\n          file.dataSignals.length === 0\n            ? '--stdout has no signal data to write: this recording has no signal channels, ' +\n              'only EDF+ annotations.'\n            : '--stdout has no signal data to write: nothing was selected that carries samples.',\n          file.dataSignals.length === 0\n            ? 'Convert to a directory to get its annotations.csv, or drop --stdout.'\n            : 'Check --channels and the requested window, or convert to a directory instead.',\n        );\n      }\n\n      // The long layout is one table whatever the rates are, so it has nothing to refuse.\n      if (plan.layout !== 'long' && plan.groups.length !== 1) {\n        throw new ConversionError(\n          'UNSUPPORTED_REQUEST',\n          // Naming the rates is the point: the hint says to narrow the selection, and this\n          // is what there is to narrow it to. The parenthetical used to repeat the count\n          // that had just been given — \"produces 3 (its channels use 3 different sampling\n          // rates)\" — which told nobody anything they could act on.\n          `--stdout needs exactly one table, but this recording produces ${plan.groups.length}, ` +\n            `one for each sampling rate its channels use ` +\n            `(${listed(formatRates(plan.groups.map((g) => g.rate)).map((r) => `${r} Hz`))}).`,\n          'Narrow it to one rate with --channels, write --layout long to get them all in ' +\n            'one table, or convert to a directory instead.',\n        );\n      }\n      let readerHungUp = false;\n      const written = await writeSignalFiles(file, plan, null, timing.starts, options, (hungUp) => {\n        readerHungUp = hungUp;\n      });\n      if (await file.changedSinceOpen()) plan.diagnostics.push(inputChanged(false));\n      return {\n        outputDir: '-',\n        files: written,\n        readerHungUp,\n        annotationCount: 0,\n        diagnostics: [...withoutFileRateWarning(file.diagnostics), ...plan.diagnostics],\n        plan,\n        file,\n        elapsedMs: Date.now() - startedAt,\n      };\n    }\n\n    const outputDir = options.outputDir ?? defaultOutputDir(inputPath);\n    await assertInputDoesNotOverlapOutputs(inputPath, outputDir, file, plan, options);\n    await prepareOutputDir(outputDir, options.force === true);\n\n    const written: WrittenFile[] = [];\n\n    if (plan.writeSignals && plan.groups.length > 0) {\n      const signals = await writeSignalFiles(file, plan, outputDir, timing.starts, options);\n      written.push(...signals);\n    } else if (plan.writeSignals) {\n      /*\n        Asked for signal data and given none to write.\n\n        Every channel selected carries zero samples per record, so there is no table to make\n        — `edf2csv rec.edf --channels unused` writes channels.csv and metadata.json and no\n        signals.csv at all. The NO_SAMPLES warning explains the channel; nothing explained the\n        missing file, and the documentation says signals.csv is written unless\n        --annotations-only was passed. Someone looking for it should be told where it went.\n\n        There are two ways to arrive with no groups, and the wording above is only true of\n        one of them. A recording that holds nothing but EDF+ annotations has no channel that\n        could have been selected, its channels.csv is a header row and nothing else, and no\n        channel of it carries samples — so \"every channel selected\", \"channels.csv still\n        describes them\" and \"which channels do carry samples\" were three false statements in\n        one warning, printed under a warning that had just said the file has no signal\n        channels. `--stdout` distinguishes the two cases a few lines up and `--info` prints\n        one accurate line; this path was the only one that did not.\n      */\n      const noChannelsAtAll = file.dataSignals.length === 0;\n      plan.diagnostics.push({\n        code: 'NO_SAMPLES',\n        severity: 'warning',\n        message: noChannelsAtAll\n          ? 'No signal file was written: there is no signal data in this recording to put in ' +\n            'one.'\n          : 'No signal file was written: every channel selected carries zero samples per data ' +\n            'record, so there is nothing to put in one.',\n        hint: noChannelsAtAll\n          ? 'annotations.csv holds whatever events it carries. channels.csv lists signal ' +\n            'channels, so it has none to list.'\n          : 'channels.csv still describes them. Run with --info to see which channels do carry ' +\n            'samples.',\n      });\n    }\n\n    if (options.annotationsOnly === true && file.annotationSignals.length === 0) {\n      plan.diagnostics.push({\n        code: 'NO_ANNOTATIONS',\n        severity: 'warning',\n        message:\n          '--annotations-only was requested but this recording has no annotation channel, ' +\n          'so there are no events to export.',\n        hint: 'Plain EDF files carry no annotations. Convert without --annotations-only to get the signals.',\n      });\n    }\n\n    let annotationsWritten = 0;\n    if (file.annotationSignals.length > 0) {\n      const result = await writeAnnotationsCsv(\n        outputDir,\n        annotationData.annotations,\n        requestedAnnotationWindow(options, plan.range.recordingStartSeconds),\n        options.gzip === true,\n        options.bom === true,\n      );\n      written.push(result);\n      annotationsWritten = result.rows;\n    }\n\n    written.push(\n      await writeChannelsCsv(outputDir, file, plan, options.gzip === true, options.bom === true),\n    );\n\n    /*\n      The file moved under the conversion. Said out loud, because nothing else shows it.\n\n      The CSVs are still correct for the records that were read, and metadata.json still\n      describes the file as it was opened — so the record is consistent with the output\n      whatever happens here. What stops being true is that the checksum describes the bytes\n      that were converted, since an in-place overwrite leaves nowhere to read them from. It\n      is dropped rather than guessed at.\n    */\n    const changed = await file.changedSinceOpen();\n    if (changed) plan.diagnostics.push(inputChanged(options.checksum === true));\n\n    await writeMetadata(\n      outputDir,\n      inputPath,\n      file,\n      plan,\n      written,\n      annotationsWritten,\n      changed ? null : checksumAtOpen,\n    );\n\n    const stale = await findStaleOutput(outputDir, written);\n\n    return {\n      outputDir,\n      files: written,\n      readerHungUp: false,\n      annotationCount: annotationsWritten,\n      diagnostics: [...withoutFileRateWarning(file.diagnostics), ...plan.diagnostics, ...stale],\n      plan,\n      file,\n      elapsedMs: Date.now() - startedAt,\n    };\n  } finally {\n    await file.close();\n  }\n}\n\n/*\n  Files this tool produces, used to spot leftovers from an earlier conversion.\n\n  The rate part has to allow every shape a filename can now take, not just the plain ones:\n\n    signals_256hz.csv         an integer rate\n    signals_12_5hz.csv        a fractional rate, decimal point written as an underscore\n    signals_1_000e-7hz.csv    a rate small enough to need exponent form  (0.2.2)\n    signals_256hz.csv.gz      any of the above, compressed                (0.3.0)\n    signals_0hz_2.csv         a second group whose rate slug collided    (0.2.1)\n\n  The previous `[\\w.]+hz` matched neither of the last two — `-` and `+` are not word\n  characters, and the collision suffix falls after the `hz`. Both were introduced by\n  recent changes and both silently stopped being recognised as this tool's own output, so\n  leftovers of exactly those kinds went unreported: the one situation the warning exists\n  for. Requiring a digit after the underscore keeps a user's own `signals_notes.csv` out.\n*/\nconst OUTPUT_PATTERN =\n  /^(signals(_\\d[\\w.+-]*hz(_\\d+)?)?\\.csv(\\.gz)?|annotations\\.csv(\\.gz)?|channels\\.csv(\\.gz)?|metadata\\.json)$/u;\n\n/**\n * Detect output from a previous run that this one did not replace.\n *\n * `--force` overwrites files but does not empty the directory, so converting a\n * mixed-rate recording and then a single-rate one into the same place leaves\n * `signals_256hz.csv` sitting next to a fresh `signals.csv`. Both look current.\n * Nothing is deleted here — the user is told, and decides.\n */\nasync function findStaleOutput(\n  outputDir: string,\n  written: readonly WrittenFile[],\n): Promise<Diagnostic[]> {\n  const entries = await readdir(outputDir).catch(() => null);\n  if (!entries) return [];\n\n  // metadata.json is rewritten on every run but is not part of the reported file list.\n  const fresh = new Set([...written.map((f) => f.name), 'metadata.json']);\n  const stale = entries.filter((name) => OUTPUT_PATTERN.test(name) && !fresh.has(name)).sort();\n  if (stale.length === 0) return [];\n\n  return [\n    {\n      code: 'STALE_OUTPUT',\n      severity: 'warning',\n      /*\n        Through `listed`, like every other message that enumerates something this run does not\n        control. How many stale files a directory holds is up to the directory, and a\n        mixed-rate recording converted into a reused one is exactly how it fills up: 120 old\n        `signals_<rate>hz.csv` files produced a single 2,373-character warning line. That is\n        the failure `listed` was written for — its own comment quotes the 1,600-character\n        version of it — and this was the one message still joining its own list.\n\n        The hint said \"Delete them\" whatever the count, so one stale file read \"signals_999hz\n        .csv is left over ... Delete them.\"\n      */\n      message:\n        `${listed(stale)} ${stale.length === 1 ? 'is' : 'are'} left over from an earlier ` +\n        `conversion into this directory and ${stale.length === 1 ? 'was' : 'were'} not rewritten.`,\n      hint:\n        `Delete ${stale.length === 1 ? 'it' : 'them'}, or convert into a fresh directory, so ` +\n        'the two runs do not get mixed up.',\n    },\n  ];\n}\n\nexport function defaultOutputDir(inputPath: string): string {\n  const base = path.basename(inputPath, path.extname(inputPath));\n  return path.join(path.dirname(inputPath), `${base}_csv`);\n}\n\n/** Never let an output target resolve to the recording being read, even with --force. */\nasync function assertInputDoesNotOverlapOutputs(\n  inputPath: string,\n  outputDir: string,\n  file: EdfFile,\n  plan: ConversionPlan,\n  options: ConvertOptions,\n): Promise<void> {\n  /*\n    The names this run will actually write, compressed ones included.\n\n    The rate files come from the plan and already carry `.csv.gz` under --gzip; the sidecars\n    were spelled out here and did not. So a compressed run checked two names it would never\n    write and missed the two it would: a recording sitting at <outdir>/channels.csv.gz was\n    overwritten by its own conversion, with --force, reported as a success. The same file\n    named signals.csv.gz was refused, which is what gives the oversight away.\n  */\n  const suffix = options.gzip === true ? '.csv.gz' : '.csv';\n  const names = new Set(plan.groups.map((group) => group.fileName));\n  if (file.annotationSignals.length > 0) names.add(`annotations${suffix}`);\n  names.add(`channels${suffix}`);\n  names.add('metadata.json');\n\n  const inputResolved = path.resolve(inputPath);\n  const inputInfo = await stat(inputPath);\n\n  for (const name of names) {\n    const target = path.join(outputDir, name);\n    const targetResolved = path.resolve(target);\n    const targetInfo = await stat(target).catch(() => null);\n    const samePath = targetResolved === inputResolved;\n    const sameFile =\n      targetInfo !== null && targetInfo.dev === inputInfo.dev && targetInfo.ino === inputInfo.ino;\n    if (!samePath && !sameFile) continue;\n\n    throw new ConversionError(\n      'INPUT_OUTPUT_COLLISION',\n      `Output file \"${target}\" is the same file as the input recording.`,\n      'Choose a separate directory with --out. The input was not modified.',\n    );\n  }\n}\n\nasync function prepareOutputDir(dir: string, force: boolean): Promise<void> {\n  /*\n    Claim the directory with a single atomic mkdir rather than asking whether it exists\n    and then creating it.\n\n    Checking first left a window between the two: two conversions started together both\n    saw \"not there\", both proceeded, and both opened write streams on the same signals.csv.\n    Neither reported anything — both exited 0, having half-written one file between them.\n    A non-recursive mkdir cannot do that. Exactly one caller creates the directory; every\n    other one gets EEXIST from the filesystem and takes the already-exists path below.\n\n    Parents are still created recursively, since --out ./a/b/c should work. Only the final\n    component is the claim.\n  */\n  const parent = path.dirname(dir);\n  if (parent && parent !== dir) {\n    try {\n      await mkdir(parent, { recursive: true });\n    } catch (cause: unknown) {\n      // A parent that is a regular file surfaces as EEXIST naming the parent, which reads\n      // as though the destination already exists rather than as \"you cannot put a\n      // directory inside a file\". Name the real obstacle instead of the errno.\n      const info = await stat(parent).catch(() => null);\n      if (info && !info.isDirectory()) {\n        throw new ConversionError(\n          'OUTPUT_UNWRITABLE',\n          `Cannot create \"${dir}\": \"${parent}\" is a file, not a directory.`,\n          'Choose a destination whose parent directories are directories, with --out.',\n        );\n      }\n      throw new ConversionError(\n        'OUTPUT_UNWRITABLE',\n        `Cannot create \"${dir}\": ${describeFsError(cause)}.`,\n        'Check the path exists and that you have permission to write there.',\n      );\n    }\n  }\n\n  let claimed = true;\n  try {\n    await mkdir(dir);\n  } catch (cause: unknown) {\n    if ((cause as NodeJS.ErrnoException).code !== 'EEXIST') {\n      throw new ConversionError(\n        'OUTPUT_UNWRITABLE',\n        `Cannot create \"${dir}\": ${describeFsError(cause)}.`,\n        'Check the path exists and that you have permission to write there.',\n      );\n    }\n    claimed = false;\n  }\n\n  if (!claimed) {\n    const existing = await stat(dir).catch(() => null);\n\n    // --force means \"replace my previous output\", not \"write output files into\n    // whatever this happens to be\". Pointing it at a regular file needs saying so.\n    if (existing && !existing.isDirectory()) {\n      throw new ConversionError(\n        'OUTPUT_UNWRITABLE',\n        `\"${dir}\" is a file, but the converted data needs a directory.`,\n        'Choose a directory with --out.',\n      );\n    }\n    if (!force) {\n      throw new ConversionError(\n        'OUTPUT_EXISTS',\n        `\"${dir}\" already exists.`,\n        'Pass --force to overwrite it, or --out to choose a different directory.',\n      );\n    }\n  }\n}\n\n/** Turn a Node filesystem error into something a person can act on. */\nfunction describeFsError(cause: unknown): string {\n  const code = (cause as NodeJS.ErrnoException | undefined)?.code;\n  if (code === 'EACCES' || code === 'EPERM') return 'permission denied';\n  if (code === 'ENOSPC') return 'the disk is full';\n  if (code === 'ENOTDIR') return 'part of the path is a file, not a directory';\n  if (code === 'EROFS') return 'the filesystem is read-only';\n  if (code === 'ENAMETOOLONG') return 'the path is too long';\n  return cause instanceof Error ? cause.message : String(cause);\n}\n\nasync function writeSignalFiles(\n  file: EdfFile,\n  plan: ConversionPlan,\n  outputDir: string | null,\n  recordStarts: Float64Array | null,\n  options: ConvertOptions,\n  onHangUp?: (hungUp: boolean) => void,\n): Promise<WrittenFile[]> {\n  // One budget for every table in this conversion, not one per table: see OffsetBudget.\n  const offsets = newOffsetBudget();\n  // Likewise one for every channel, not one per channel: see SampleCacheBudget.\n  const sampleCaches = newSampleCacheBudget();\n  // Only the stdout path needs this; --out finds a full disk on its own, because it always\n  // has another file to write afterwards. See auditStdout.\n  const audit = outputDir === null ? auditStdout() : null;\n  /*\n    In the long layout every group writes into one table, so they share one stream. Opening\n    a stream per group on the same path is what the rate-slug collision fix in groupByRate\n    was about: two writers on one file interleave rows under a header naming one of them.\n  */\n  let shared: {\n    stream: Writable;\n    settled: Promise<void>;\n    release: () => void;\n    target: Writable;\n    writer: BufferedLineWriter;\n  } | null = null;\n\n  /*\n    One buffer's worth of memory for the conversion, not one per table.\n\n    Every group had its own writer at the default 1 MiB threshold, so pending output was\n    group count × 1 MiB before anything drained. A 6.5 MB recording with 40 sampling rates\n    — the header allows thousands of channels, and a research montage really does mix a\n    dozen rates — died with a raw V8 heap out-of-memory and exit 134 under a 96 MB cap,\n    while the site advertises 48 MB. The recording is small; it is the fan-out that is not.\n\n    Split evenly with a floor, so the single-rate case, which is nearly every recording,\n    keeps exactly the buffer it always had, and forty tables cost 2.5 MB rather than 40.\n    The long layout shares one writer already and is unaffected either way.\n  */\n  const MIN_FLUSH_THRESHOLD = 8 * 1024;\n  const flushThreshold = Math.max(\n    MIN_FLUSH_THRESHOLD,\n    Math.floor(DEFAULT_FLUSH_THRESHOLD / Math.max(1, plan.groups.length)),\n  );\n  /*\n    The stream's own buffer is the other half of the same sum.\n\n    0.5.6 shared the line-buffer budget and left `createWriteStream` at its 64 KiB default,\n    which is per stream: 200 rate groups meant 12.8 MB of stream buffer on top of 12.8 MB of\n    line buffer, and an 855 KB recording still died at a 48 MB cap. Shared the same way, with\n    a floor that keeps an ordinary conversion writing in useful-sized pieces.\n  */\n  const streamBuffer = Math.max(\n    16 * 1024,\n    Math.floor(DEFAULT_FLUSH_THRESHOLD / Math.max(1, plan.groups.length)),\n  );\n\n  const open: OpenGroup[] = plan.groups.map((group, groupIndex) => {\n    // A null directory means the single table goes to stdout. process.stdout is already a\n    // writable stream, so the same buffered writer and backpressure handling apply.\n    const target =\n      shared?.target ??\n      (outputDir === null\n        ? process.stdout\n        : createWriteStream(path.join(outputDir, group.fileName), {\n            highWaterMark: streamBuffer,\n          }));\n    const { stream, settled, release } = shared ?? compressed(target, options.gzip === true);\n    /*\n      Under --gzip the writer feeds the compressor, so its byte count is the CSV before\n      compression and says nothing about what reached the descriptor. The compressor's own\n      output is what stdout is handed, so that is what is counted. `pipe` uses a 'data'\n      listener of its own and a second one is delivered the same chunks.\n\n      Once per stream, which in the long layout is once for all the groups. Attaching per\n      group put N listeners on the one shared compressor, so every chunk was counted N\n      times: `--stdout --layout long --gzip` on a 40-rate recording claimed 622,240 of\n      622,240 bytes where 15,556 had been written, failed with a disk-full error over a\n      perfectly good file, and printed Node's MaxListenersExceededWarning to stderr on the\n      way past ten. 0.5.4 fixed the same arithmetic in the uncompressed branch and left\n      this one, because the uncompressed branch is where the count is a sum and this one is\n      where it is a subscription.\n    */\n    if (audit && stream !== target && !shared) {\n      stream.on('data', (chunk: Buffer) => audit.count(chunk.length));\n    }\n    /*\n      One writer, not one per group, when the table is shared. Separate writers over one\n      stream each hold their own buffer and flush on their own schedule, so the rows would\n      reach the file in whatever order the buffers filled — which is not the order they\n      were produced in, and the long layout's whole claim is that its rows are in time\n      order.\n    */\n    const writer = shared?.writer ?? new BufferedLineWriter(stream, flushThreshold);\n    if (plan.layout === 'long' && !shared) shared = { stream, settled, release, target, writer };\n\n    // Only the first group writes the header of a shared table, and the mark before it.\n    if (plan.layout !== 'long' || groupIndex === 0) {\n      if (options.bom === true) writer.push(UTF8_BOM);\n      writer.pushLine(\n        plan.layout === 'long'\n          ? csvRow(['time_s', 'channel', 'value'])\n          : csvRow(['time_s', ...group.channels.map((c) => c.column)]),\n      );\n    }\n    return {\n      group,\n      writer,\n      formatters: group.channels.map((c) => makeSampleFormatter(c.signal, c.decimals, sampleCaches)),\n      formatTime: makeTimeFormatter(\n        group.samplesPerRecord,\n        group.rate,\n        group.timeDecimals,\n        offsets,\n      ),\n      rows: 0,\n      settled,\n      release,\n    };\n  });\n\n  try {\n    const written = await streamSignalRows(file, plan, open, recordStarts, options);\n\n    /*\n      Checked once everything has been flushed and ended, and not when the reader hung up.\n\n      `--stdout | head -1` closes the pipe on purpose, which is a shell idiom rather than a\n      failure. A pipe is not a regular file, so auditStdout declines it anyway — the second\n      guard is here because the cost of getting this one wrong is reporting a failure for a\n      command that worked.\n    */\n    if (audit) {\n      // Uncompressed, the writer hands its bytes straight to the descriptor; compressed,\n      // they were counted on the compressor's way out.\n      if (options.gzip !== true) {\n        /*\n          Once per writer, not once per group. The long layout gives every group the same\n          writer, so counting per group multiplied its byte total by the number of rates:\n          `--stdout --layout long` on a three-rate recording handed over 32,043 bytes, was\n          credited with 96,129, and failed with a disk-full error for a file that was\n          complete on disk. It only showed with stdout redirected to a regular file, since\n          that is the one case the audit applies to — which is the command the --layout\n          documentation gives.\n        */\n        for (const writer of new Set(open.map((entry) => entry.writer))) {\n          audit.count(writer.bytesOut);\n        }\n      }\n      if (!open.some((entry) => entry.writer.hungUp)) audit.verify();\n    }\n    onHangUp?.(open.some((entry) => entry.writer.hungUp));\n    return written;\n  } catch (cause) {\n    for (const entry of open) entry.writer.destroy();\n\n    /*\n      Reading and writing both fail through here, and both were reported as writing.\n\n      A recording that shrinks mid-conversion — still being written by the acquisition\n      software, say — raises the reader's own error, which names the record and says the\n      file changed size while it was being read. That precise diagnosis was then filed under\n      `Writing to \"<dir>\" failed` and given the hint about freeing disk space, which sends\n      someone to look at the one part of the system that was working.\n\n      The reader's message and its advice are kept; only the note about partial output is\n      added, since that much is true of either failure.\n    */\n    // A ConversionError arrived already saying what went wrong — a callback that threw, say.\n    // Wrapping it again turned \"the onProgress callback threw\" into `Writing to \"out\"\n    // failed: the onProgress callback threw`, under a hint about checking the destination.\n    if (cause instanceof ConversionError) throw cause;\n\n    if (cause instanceof EdfError) {\n      const where = outputDir === null ? 'stdout' : `\"${outputDir}\"`;\n      throw new ConversionError(\n        'INPUT_UNREADABLE',\n        cause.message,\n        `${cause.hint ? `${cause.hint} ` : ''}What was written to ${where} before it failed is ` +\n          `incomplete and should not be used.`,\n      );\n    }\n\n    const detail = cause instanceof Error ? cause.message : String(cause);\n    throw new ConversionError(\n      'WRITE_FAILED',\n      `Writing to ${outputDir === null ? 'stdout' : `\"${outputDir}\"`} failed: ${detail}`,\n      writeHint(cause, outputDir === null),\n    );\n  }\n}\n\n/**\n * One record's samples in the long layout: `time_s,channel,value`, in time order.\n *\n * The groups are merged rather than written one after another. Every sample in a record\n * falls inside that record's span, so taking the earliest next sample across the groups\n * each time leaves the whole file sorted by `time_s` — which is the only thing that makes a\n * mixed-rate long table useful, since sorting 3 million rows afterwards is the reader's\n * problem and a large one.\n *\n * Ties go to the group with the higher rate, which is the order the groups are already in.\n * Within a sample time the channels come out in the order the file declares them.\n */\n/**\n * Whether two sample times are close enough that only rounding could separate them.\n *\n * A relative epsilon, because the gap between doubles grows with magnitude. Well below any\n * real sample interval — the finest a recording can declare is bounded by its record\n * duration and samples-per-record fields — and well above the one-ULP disagreement that two\n * exact divisions of the same instant produce.\n */\nfunction nearlyEqual(a: number, b: number): boolean {\n  return Math.abs(a - b) <= Math.max(Math.abs(a), Math.abs(b)) * 1e-12;\n}\n\n/** The chosen instant as it will be written, for deciding which channels share it. */\nfunction formatAt(\n  open: readonly OpenGroup[],\n  cursors: Int32Array,\n  recordStart: number,\n  earliest: number,\n): string {\n  for (let g = 0; g < open.length; g++) {\n    const entry = open[g];\n    if (!entry) continue;\n    const sample = cursors[g] ?? 0;\n    if (sample >= entry.group.samplesPerRecord) continue;\n    if (recordStart + sample / entry.group.rate === earliest) {\n      return entry.formatTime(recordStart, sample);\n    }\n  }\n  return '';\n}\n\nasync function writeLongRecord(\n  file: EdfFile,\n  open: readonly OpenGroup[],\n  batch: RecordBatch,\n  recordInBatch: number,\n  recordStart: number,\n  range: ConversionPlan['range'],\n): Promise<void> {\n  const writer = open[0]?.writer;\n  if (!writer) return;\n\n  const cursors = new Int32Array(open.length);\n  /* Reused across sample times so a three-million-row conversion allocates one of these. */\n  const due: { entry: OpenGroup; groupIndex: number; sample: number; channel: number }[] = [];\n\n  for (;;) {\n    let earliest = Infinity;\n    for (let g = 0; g < open.length; g++) {\n      const entry = open[g];\n      if (!entry) continue;\n      const sample = cursors[g] ?? 0;\n      if (sample >= entry.group.samplesPerRecord) continue;\n      const time = recordStart + sample / entry.group.rate;\n      if (time < earliest) earliest = time;\n    }\n    if (earliest === Infinity) return;\n\n    /*\n      Everything at this instant, in the order the file declares its channels.\n\n      Groups are ordered by rate, largest first, because that is how the wide layout names\n      its files. Emitting a tie group by group therefore ordered the channels by descending\n      sampling rate — so a recording declaring `slow, medium, fast` wrote `fast, medium,\n      slow`, while the documentation promised file order and channels.csv listed file order.\n      Signal index is the file's own order, and the only one a reader can predict.\n\n      \"At this instant\" is decided on the time as written, not on the double. `s / rate` for\n      two channels at one moment need not give the same double: a 0.3 s record holding 12 and\n      4 samples makes 40 Hz and 13.333… Hz, and 9/40 is 0.22500000000000000555 while 3/13.333…\n      is 0.22499999999999997780. Equality missed that, so those two rows fell out in numeric\n      order — `slow` before `fast`, once, in the middle of a file that was otherwise right.\n\n      Two rows are at one time exactly when they carry the same `time_s`, which is the only\n      definition a reader of the CSV can apply. The numeric pre-filter keeps the common case\n      to one comparison; formatting happens only for candidates already within a hair.\n    */\n    const earliestText = formatAt(open, cursors, recordStart, earliest);\n    due.length = 0;\n    for (let g = 0; g < open.length; g++) {\n      const entry = open[g];\n      if (!entry) continue;\n      const sample = cursors[g] ?? 0;\n      if (sample >= entry.group.samplesPerRecord) continue;\n      const time = recordStart + sample / entry.group.rate;\n      if (time !== earliest) {\n        // Far away in the ordinary case; only a near-tie is worth formatting.\n        if (!nearlyEqual(time, earliest)) continue;\n        if (entry.formatTime(recordStart, sample) !== earliestText) continue;\n      }\n      cursors[g] = sample + 1;\n      // Same window rule as the wide layout, with the same per-rate slack.\n      if (\n        !sampleTimeIsInRange(earliest, range.startSeconds, range.endSeconds, toleranceFor(entry.group.rate))\n      ) {\n        continue;\n      }\n      for (let c = 0; c < entry.group.channels.length; c++) {\n        due.push({ entry, groupIndex: g, sample, channel: c });\n      }\n    }\n    if (due.length === 0) continue;\n    if (due.length > 1) {\n      due.sort(\n        (a, b) =>\n          (a.entry.group.channels[a.channel]?.signal.index ?? 0) -\n          (b.entry.group.channels[b.channel]?.signal.index ?? 0),\n      );\n    }\n\n    for (const item of due) {\n      const channel = item.entry.group.channels[item.channel];\n      const format = item.entry.formatters[item.channel];\n      if (!channel || !format) continue;\n      if (writer.hungUp) return;\n      writer.pushLine(\n        `${item.entry.formatTime(recordStart, item.sample)},${escapeCsvField(channel.column)},` +\n          `${format(file.sampleAt(batch, recordInBatch, channel.signal, item.sample))}`,\n      );\n      item.entry.rows++;\n      // Flushed inside the record for the same reason the wide layout is; see there.\n      if (writer.full) await writer.flush();\n    }\n  }\n}\n\nasync function streamSignalRows(\n  file: EdfFile,\n  plan: ConversionPlan,\n  open: OpenGroup[],\n  recordStarts: Float64Array | null,\n  options: ConvertOptions,\n): Promise<WrittenFile[]> {\n  const { startSeconds, endSeconds, startRecord, endRecord } = plan.range;\n  const { recordDuration } = file.header;\n  let recordsDone = 0;\n\n  /*\n    Every destination has hung up, so nothing formatted from here on could reach anyone.\n    `--stdout | head -1` is the usual way to arrive here: the reader takes one line and\n    closes the pipe while the conversion is still near the start of the recording.\n\n    Stopping also makes the reported row count mean what it says — rows that reached the\n    consumer, rather than rows the loop went on formatting into a discarded buffer.\n  */\n  const allHungUp = (): boolean => open.length > 0 && open.every((entry) => entry.writer.hungUp);\n\n  for await (const batch of file.readRecords({ startRecord, endRecord })) {\n    if (allHungUp()) break;\n    for (let r = 0; r < batch.recordCount; r++) {\n      if (allHungUp()) break;\n      const index = batch.firstRecordIndex + r;\n      const recordStart = recordStarts ? (recordStarts[index] ?? index * recordDuration) : index * recordDuration;\n\n      if (plan.layout === 'long') {\n        await writeLongRecord(file, open, batch, r, recordStart, plan.range);\n        recordsDone++;\n        continue;\n      }\n\n      for (const entry of open) {\n        const { group, writer, formatters, formatTime } = entry;\n        const { channels, rate } = group;\n        // Slack that never reaches the next sample; see toleranceFor.\n        const slack = toleranceFor(rate);\n\n        for (let sample = 0; sample < group.samplesPerRecord; sample++) {\n          const time = recordStart + sample / rate;\n          if (!sampleTimeIsInRange(time, startSeconds, endSeconds, slack)) continue;\n\n          let row = formatTime(recordStart, sample);\n          for (let c = 0; c < channels.length; c++) {\n            const channel = channels[c];\n            const format = formatters[c];\n            if (!channel || !format) continue;\n            row += ',' + format(file.sampleAt(batch, r, channel.signal, sample));\n          }\n          if (writer.hungUp) break;\n          writer.pushLine(row);\n          entry.rows++;\n\n          /*\n            Flushed inside the record, not only at the end of one.\n\n            The buffer was drained once per record, so the rows of a single record piled up\n            with nothing emptying them — memory followed samples-per-record rather than the\n            batch size the writer exists to hold to. One record of 16,000,000 samples died\n            with a heap out of memory under a 256 MB cap, while the same 32 MB of samples\n            split into 16,000 records converted to the same 283 MB CSV without trouble. The\n            format allows either layout and says nothing about which to expect.\n\n            `full` is a synchronous read of the pending size, so the twenty million rows that\n            are not at a boundary cost a comparison rather than a microtask each.\n          */\n          if (writer.full) await writer.flush();\n        }\n        await writer.maybeFlush();\n      }\n\n      recordsDone++;\n    }\n\n    if (options.onProgress) {\n      /*\n        A caller's callback is the caller's, and its failures are not the destination's.\n\n        This ran inside the same try that turns a stream failure into WRITE_FAILED, so a\n        progress callback that threw came back as `Writing to \"out\" failed: caller bug`,\n        advising the reader to check a destination that was working perfectly. It is the\n        same misattribution the write hints had until 0.4.36, one layer up.\n\n        The original is kept as `cause`, so the stack that actually matters survives, and\n        the conversion still stops — the callback threw, and carrying on writing into a\n        directory whose owner has just failed is not an improvement.\n      */\n      try {\n        options.onProgress({\n          recordsDone,\n          recordsTotal: endRecord - startRecord,\n          // Once per writer: the long layout's groups share one, so summing per group\n          // reported a figure larger than the file being written.\n          bytesWritten: [...new Set(open.map((entry) => entry.writer))].reduce(\n            (sum, entry) => sum + entry.charsWritten,\n            0,\n          ),\n        });\n      } catch (cause) {\n        throw new ConversionError(\n          'CALLBACK_FAILED',\n          `The onProgress callback threw: ${cause instanceof Error ? cause.message : String(cause)}`,\n          'This is the caller\\'s callback, not the recording or the destination. Whatever was ' +\n            'written before it threw is incomplete and should not be used.',\n          { cause },\n        );\n      }\n    }\n  }\n\n  const closed = new Set<BufferedLineWriter>();\n  for (const entry of open) {\n    if (closed.has(entry.writer)) continue;\n    closed.add(entry.writer);\n    try {\n      await entry.writer.end();\n      // With --gzip the writer's stream is the compressor, whose end callback fires when the\n      // compressor is done rather than when the file behind it is. Awaiting only that would\n      // report success with the tail of the file still in flight.\n      await entry.settled;\n    } finally {\n      // In a finally for the reason 0.5.45 gives about the writer's own release: a\n      // conversion that fails here still has to leave process.stdout as it found it, and a\n      // failure is exactly when a caller goes on to convert something else.\n      entry.release();\n    }\n  }\n\n  // A shared table is one file, and its row count is every group's rows, not the first's.\n  if (plan.layout === 'long') {\n    const first = open[0];\n    if (!first) return [];\n    return [{ name: first.group.fileName, rows: open.reduce((sum, e) => sum + e.rows, 0) }];\n  }\n  return open.map((entry) => ({ name: entry.group.fileName, rows: entry.rows }));\n}\n\n/**\n * The stream rows are written to, plus a promise for the data reaching its destination.\n *\n * Compression sits between the writer and the file as a transform. Failures below it — a\n * full disk, an unwritable path — surface on the file stream, where nothing is listening,\n * so they are forwarded onto the compressor: that is the stream the writer watches, and\n * routing them there keeps one error path rather than two.\n */\nfunction compressed(\n  target: Writable,\n  gzip: boolean,\n): { stream: Writable; settled: Promise<void>; release: () => void } {\n  if (!gzip) return { stream: target, settled: Promise.resolve(), release: (): void => {} };\n  const compressor = createGzip();\n  /*\n    Removable, because one of the streams this can be handed outlives the conversion.\n\n    0.5.36 fixed exactly this leak for the writer's own listener: a library caller running\n    twelve `toStdout` conversions left twelve 'error' listeners on `process.stdout` and got\n    Node's MaxListenersExceededWarning on the eleventh. That fix is `BufferedLineWriter`'s\n    `#release()`, and it cannot reach this one — under `gzip` the writer's stream is the\n    compressor, and `process.stdout` is only ever the compressor's destination. So the same\n    leak survived on the same stream, behind one extra flag, and the regression test written\n    to catch it does not pass `gzip: true`.\n\n    A file stream is a different matter and needs no release: it is created for this\n    conversion and closed with it. The discipline is the writer's — release only from a\n    stream this tool does not own.\n  */\n  const forward = (error: Error): void => {\n    compressor.destroy(error);\n  };\n  target.on('error', forward);\n  const release = (): void => {\n    if (target === process.stdout || target === process.stderr) target.off('error', forward);\n  };\n\n  /*\n    pipe() ends its destination when the source ends, and stdout must survive the\n    conversion: the writer already refuses to close it, because a closed stdout breaks\n    every later write in the process. Nothing waits on stdout either — it is not this\n    tool's to finish.\n  */\n  const toStdout = target === process.stdout;\n  compressor.pipe(target, { end: !toStdout });\n  if (toStdout) {\n    /*\n      Waited on, even though stdout is not ours to end.\n\n      This returned an already-resolved promise, so `await entry.settled` waited for nothing\n      and the conversion declared itself finished while the compressor still held the tail of\n      the stream. `--stdout --gzip` onto a destination that filled up therefore printed the\n      ENOSPC *and then* \"Wrote 102,400 rows to stdout.\" — and exited 0, over a file 11,270\n      bytes short whose gzip member has no trailer and will not decompress. Through `--out`,\n      on the same volume with the same space, the identical failure is reported and exits 1.\n\n      The byte audit could not see it either: it stats the descriptor as soon as the writers\n      are done, which on this path is before the compressor has pushed its last chunks.\n\n      `finished(compressor)` is the source side, not the destination — it resolves when the\n      compressor has flushed everything into stdout, and it is stdout's own write that fails.\n      That keeps `end: !toStdout` exactly as it was: nothing here closes stdout.\n    */\n    const flushed = finished(compressor).catch((error: unknown) => {\n      /*\n        EPIPE is not a failure here, and turning it into one is the trap this nearly fell\n        into: `--stdout --gzip | head` is an ordinary thing to type, and the documented\n        answer to it is \"Stopped: the reader closed the pipe after 52,507 of 102,400 rows\n        had been written\", exit 0. Waiting on the compressor surfaced the EPIPE that the\n        uncompressed path already routes through the writer's hang-up flag — the writer\n        sees the same error, forwarded, and records it — so the wait has to let that one\n        through and keep everything else.\n      */\n      if ((error as NodeJS.ErrnoException | null)?.code === 'EPIPE') return;\n      throw error;\n    });\n    flushed.catch(() => {});\n    return { stream: compressor, settled: flushed, release };\n  }\n\n  /*\n    A failure under the compressor rejects both this promise and the writer's own end(),\n    and end() is the one awaited first. Without a handler attached here that rejection\n    belonged to nobody, and Node killed the process over it: `--gzip` into an unwritable\n    path printed a raw EISDIR stack trace instead of the ordinary \"Writing to ... failed\"\n    message and exit 1, which is what the same path does uncompressed.\n\n    Attaching the handler is enough to make it handled. Awaiting `settled` downstream still\n    reports the failure in the case where end() happened to succeed.\n  */\n  const settled = finished(target);\n  settled.catch(() => {});\n  return { stream: compressor, settled, release };\n}\n\n/**\n * Write one of the sidecar files, reporting a failure the way the signal writer does.\n *\n * These three used to call `writeFile` bare, so a failure escaped as whatever the\n * filesystem said — `EISDIR: illegal operation on a directory, open '...'` with no hint\n * and, more importantly, no mention that the signal files had already been written. The\n * conversion stopped half-done and the message gave no sign of it.\n */\nasync function writeOutputFile(\n  outputDir: string,\n  name: string,\n  contents: string,\n  gzip = false,\n  bom = false,\n): Promise<void> {\n  // metadata.json never gets one: JSON.parse rejects a leading U+FEFF, so a mark there\n  // would break every reader of the file to help a spreadsheet that will not open it.\n  if (bom) contents = UTF8_BOM + contents;\n  try {\n    // The sidecars are built in memory before being written, so compressing them in memory\n    // costs nothing extra. Only the signal tables are large enough to need a stream.\n    await writeFile(path.join(outputDir, name), gzip ? gzipSync(contents) : contents, gzip ? undefined : 'utf8');\n  } catch (cause) {\n    const detail = cause instanceof Error ? cause.message : String(cause);\n    throw new ConversionError(\n      'WRITE_FAILED',\n      `Writing \"${name}\" to \"${outputDir}\" failed: ${detail}`,\n      writeHint(cause),\n    );\n  }\n}\n\nasync function writeChannelsCsv(\n  outputDir: string,\n  file: EdfFile,\n  plan: ConversionPlan,\n  gzip: boolean,\n  bom: boolean,\n): Promise<WrittenFile> {\n  const includedColumns = new Set(plan.groups.flatMap((g) => g.channels.map((c) => c.signal.index)));\n  const fileFor = new Map<number, string>();\n  for (const group of plan.groups) {\n    for (const channel of group.channels) fileFor.set(channel.signal.index, group.fileName);\n  }\n\n  const lines = [\n    csvRow([\n      'column',\n      'signal_index',\n      'label',\n      'unit',\n      'sampling_rate_hz',\n      'samples_per_record',\n      'physical_min',\n      'physical_max',\n      'digital_min',\n      'digital_max',\n      'transducer',\n      'prefiltering',\n      'output_file',\n      'converted',\n    ]),\n  ];\n\n  for (const signal of file.header.signals) {\n    if (signal.isAnnotations) continue;\n    const column = plan.columnNames.get(signal.index) ?? `signal_${signal.index}`;\n    lines.push(\n      csvRow([\n        column,\n        String(signal.index),\n        signal.label,\n        signal.physicalDimension,\n        String(signal.samplingRate),\n        String(signal.samplesPerRecord),\n        String(signal.physicalMin),\n        String(signal.physicalMax),\n        String(signal.digitalMin),\n        String(signal.digitalMax),\n        signal.transducer,\n        signal.prefiltering,\n        fileFor.get(signal.index) ?? '',\n        includedColumns.has(signal.index) ? 'yes' : 'no',\n      ]),\n    );\n  }\n\n  const name = gzip ? 'channels.csv.gz' : 'channels.csv';\n  await writeOutputFile(outputDir, name, lines.join('\\n') + '\\n', gzip, bom);\n  return { name, rows: lines.length - 1 };\n}\n\n/*\n  The bounds an annotation is filtered against: what the caller actually asked for, not the\n  window that survived being clamped to the recording.\n\n  Filtering by the resolved window meant an unbounded request still lost events. `--end 999h`\n  on a three-second file clamps to 3, and `--start 0` gets its end from the recording, so\n  both filtered to [0, 3) and dropped the markers at 3.0 and 3.5 that a bare invocation\n  keeps — asking for more of a recording returned less of it.\n\n  An end the caller did not give is unbounded, not \"the end of the data\": EDF+ lets an\n  annotation sit past the last sample, which is exactly where an end-of-recording marker is.\n\n  `--duration` is measured from wherever the conversion actually starts. Anchoring it at 0\n  instead read the same absent `--start` two ways in two adjacent lines, and on a recording\n  that does not begin at zero the two windows did not even overlap: an EDF+D file whose first\n  record sits at 30 s converted its samples from [30, 35) while filtering annotations against\n  (-inf, 5), so every event inside the converted window was dropped and `annotations.csv` came\n  back empty. `resolveRange` has always defaulted the same missing start to the earliest\n  record, which is where this now takes it from.\n*/\nfunction requestedAnnotationWindow(\n  options: ConvertOptions,\n  recordingStart: number,\n): { from: number; to: number } {\n  const from = options.start ?? -Infinity;\n  const to =\n    options.end !== undefined\n      ? options.end\n      : options.duration !== undefined\n        ? (options.start ?? recordingStart) + options.duration\n        : Infinity;\n  return { from, to };\n}\n\nasync function writeAnnotationsCsv(\n  outputDir: string,\n  annotations: readonly Annotation[],\n  window: { from: number; to: number },\n  gzip: boolean,\n  bom: boolean,\n): Promise<WrittenFile> {\n  const inWindow = annotations\n    .filter((a) => a.onset >= window.from && a.onset < window.to)\n    .sort((a, b) => a.onset - b.onset || a.recordIndex - b.recordIndex);\n\n  const lines = [csvRow(['onset_s', 'duration_s', 'description', 'record_index'])];\n  for (const annotation of inWindow) {\n    lines.push(\n      csvRow([\n        String(annotation.onset),\n        annotation.duration === null ? '' : String(annotation.duration),\n        annotation.text,\n        String(annotation.recordIndex),\n      ]),\n    );\n  }\n\n  const name = gzip ? 'annotations.csv.gz' : 'annotations.csv';\n  await writeOutputFile(outputDir, name, lines.join('\\n') + '\\n', gzip, bom);\n  return { name, rows: inWindow.length };\n}\n\n/**\n * What to try next, chosen from what actually went wrong.\n *\n * Every write failure carried the same advice — \"Free up space or choose another destination\n * with --out\" — which fits exactly one errno. A directory sitting where signals.csv belongs\n * came back telling the reader to free up disk space, and so did a read-only volume, a\n * permission denial and a path too long for the filesystem. Wrong advice is worse than none:\n * it sends someone to check `df` on a disk that is fine, and the thing that is actually\n * wrong stays unexamined.\n *\n * The errno is the one piece of the failure that names the cause, so it is what picks the\n * sentence. Anything unrecognised keeps the general form rather than guessing.\n */\nfunction writeHint(cause: unknown, toStdout = false): string {\n  /*\n    The stdout path writes no files, and --out is the flag its user chose not to pass.\n\n    Both halves of this sentence were wrong there: \"the files written so far\" named files\n    that do not exist, and \"choose another destination with --out\" is advice for a different\n    command — the destination is whatever the shell redirected the stream to. Same class as\n    the disk-space hint this function replaced, one flag over.\n  */\n  const preamble = toStdout\n    ? 'What reached stdout before it failed is incomplete and should not be used. '\n    : 'The files written so far are incomplete and should not be used. ';\n  const elsewhere = toStdout ? 'redirect it somewhere else' : 'choose another with --out';\n  const code = (cause as NodeJS.ErrnoException | null)?.code;\n  switch (code) {\n    case 'ENOSPC':\n      return `${preamble}The destination is out of space; free some up or ${elsewhere}.`;\n    case 'EDQUOT':\n      return `${preamble}You are over your disk quota on this filesystem; ${elsewhere}.`;\n    case 'EACCES':\n    case 'EPERM':\n      return `${preamble}You do not have permission to write there; ${elsewhere}.`;\n    case 'EROFS':\n      return `${preamble}That filesystem is mounted read-only; ${elsewhere}.`;\n    case 'EISDIR':\n      return `${preamble}A directory is sitting where that file belongs; remove or rename it, or ${elsewhere}.`;\n    case 'ENOENT':\n      return `${preamble}Part of that path no longer exists; make sure nothing is removing it while the conversion runs.`;\n    case 'ENAMETOOLONG':\n      return `${preamble}That path is longer than the filesystem allows; ${toStdout ? 'redirect it somewhere shorter' : 'choose a shorter destination with --out'}.`;\n    case 'EMFILE':\n    case 'ENFILE':\n      return `${preamble}Too many files are open; a recording with many sampling rates opens one output file per rate, so --channels narrows it.`;\n    case 'EPIPE':\n      return `${preamble}Whatever was reading the output closed it before the conversion finished.`;\n    default:\n      return `${preamble}Check the destination and run the conversion again.`;\n  }\n}\n\n/**\n * Confirms that everything handed to a file-backed stdout actually arrived.\n *\n * `edf2csv rec.edf --stdout > out.csv` onto a volume that the output very nearly fills lost\n * the tail in silence: 94,977 of 102,400 rows on disk, the file ending mid-row, stderr\n * announcing \"Wrote 102,400 rows to stdout.\" and the process exiting 0. The same recording\n * onto the same volume through `--out` fails correctly, which is what gives it away.\n *\n * POSIX `write` returns a short count rather than an error when the disk fills partway\n * through a single call, and only the NEXT write raises ENOSPC. `--out` always has a next\n * write — channels.csv and metadata.json come after — so it always finds out. `--stdout`\n * has nothing after it, and when fd 1 is a regular file Node's stdout is a SyncWriteStream\n * whose `_write` discards the byte count `writeSync` returns, so nothing is raised at all.\n * No error means no `#failure`, so checking that alone would not have caught this.\n *\n * What can be checked is the descriptor: how much it grew against how much it was given.\n * Only for a regular file — a pipe, a terminal or a socket has no size to compare, and on\n * those a short write cannot go unreported this way. Appending (`>>`) is fine, since the\n * starting size is taken before anything is written.\n */\nfunction auditStdout(): { count: (bytes: number) => void; verify: () => void } | null {\n  let startSize: number;\n  try {\n    const info = fstatSync(1);\n    if (!info.isFile()) return null;\n    startSize = info.size;\n  } catch {\n    // No usable descriptor to audit; the conversion is not the place to complain about it.\n    return null;\n  }\n\n  let expected = 0;\n  return {\n    count: (bytes: number): void => {\n      expected += bytes;\n    },\n    verify: (): void => {\n      let landed: number;\n      try {\n        landed = fstatSync(1).size - startSize;\n      } catch {\n        return;\n      }\n      if (landed >= expected) return;\n      throw new ConversionError(\n        'WRITE_FAILED',\n        `Writing to stdout failed: ${expected - landed} of ${expected} bytes did not reach ` +\n          `the destination, which stopped accepting them part way through.`,\n        'What is there ends mid-row and should not be used. The destination is almost ' +\n          'certainly out of space — a short write is how a filesystem reports filling up ' +\n          'mid-write, and nothing after it raised an error because there was nothing after it.',\n      );\n    },\n  };\n}\n\n/** Data rows across every signal table, so \"nothing was written\" is one question. */\nfunction rowsIn(written: readonly WrittenFile[]): number {\n  return written.reduce((total, file) => total + file.rows, 0);\n}\n\n\n/** Raised when the input moved while it was being read. See where it is pushed. */\nfunction inputChanged(hadChecksum: boolean): Diagnostic {\n  return {\n    code: 'INPUT_CHANGED',\n    severity: 'warning',\n    message:\n      'The input changed while it was being converted, so this output covers the file as ' +\n      'it was when the conversion started, not as it is now.',\n    hint: hadChecksum\n      ? 'No checksum was recorded: the bytes that were converted are no longer there to ' +\n        'hash. Convert again once the recording is finished.'\n      : 'Convert again once the recording is finished to pick up the rest.',\n  };\n}\n\nasync function writeMetadata(\n  outputDir: string,\n  inputPath: string,\n  file: EdfFile,\n  plan: ConversionPlan,\n  written: readonly WrittenFile[],\n  annotationCount: number,\n  /** Hash of the bytes that were converted, or null when it could not be vouched for. */\n  checksum: string | null,\n): Promise<void> {\n  const { header } = file;\n\n  /*\n    The file as it was when it was opened, not as it is now.\n\n    Both of these used to come from re-opening the path once the CSVs were written, which\n    describes whatever answers to that name by then rather than what was converted. A\n    recording still being written grew from 2,000 records to 3,000 mid-conversion and\n    metadata.json recorded `data_records: 2000` — correct, the CSV holds 2,000 — beside the\n    byte count and SHA-256 of the 3,000-record file. The two halves of one provenance record\n    described two different files, and the checksum covered bytes nobody had converted.\n    Replacing the file at that path did the same thing more thoroughly.\n\n    `file.fileSize` is the number every record count and window in this output was derived\n    from, and the hash is taken over exactly those bytes through the descriptor already open\n    on them, so the record describes one file throughout.\n  */\n  const metadata = {\n    tool: { name: 'edf2csv', version: TOOL_VERSION },\n    source: {\n      path: path.resolve(inputPath),\n      bytes: file.fileSize,\n      modified: new Date(file.modifiedAtOpenMs).toISOString(),\n      sha256: checksum,\n    },\n    recording: {\n      format: describeFormat(header),\n      version: header.version,\n      patient_id: header.patientId,\n      recording_id: header.recordingId,\n      // Zone-less on purpose: EDF records local wall-clock digits and no timezone.\n      start_datetime_local: formatWallClock(header.startDateTime),\n      start_date_raw: header.startDateRaw,\n      start_time_raw: header.startTimeRaw,\n      data_records: file.recordCount,\n      data_records_declared: header.declaredRecordCount,\n      record_duration_seconds: header.recordDuration,\n      duration_seconds: file.durationSeconds,\n      signal_count: header.signalCount,\n      annotation_channels: file.annotationSignals.length,\n    },\n    conversion: {\n      converted_at: new Date().toISOString(),\n      start_seconds: plan.range.startSeconds,\n      end_seconds: plan.range.endSeconds,\n      whole_recording: plan.range.isWholeRecording,\n      records_converted: [plan.range.startRecord, plan.range.endRecord],\n      annotations_written: annotationCount,\n      /*\n        Which shape the signal table is in, which nothing recorded.\n\n        A wide `signals.csv` and a long one are different files with different columns, and\n        metadata.json described them identically — so a pipeline handed an output directory\n        could not tell from the archive which it had. It matters most for `rate_groups` right\n        below: in the wide layout those entries are one per file and their `channels` are that\n        file's columns, and in the long layout every entry names the one shared table and its\n        `channels` are values in that table's `channel` column. Same array, two readings, and\n        no way to know which applied.\n      */\n      layout: plan.layout,\n      files: written.map((f) => ({ name: f.name, rows: f.rows })),\n      rate_groups: plan.groups.map((g) => ({\n        file: g.fileName,\n        sampling_rate_hz: g.rate,\n        channels: g.channels.map((c) => c.column),\n        decimals: g.channels.map((c) => c.decimals),\n      })),\n    },\n    notes: [...withoutFileRateWarning(file.diagnostics), ...plan.diagnostics].map((d) => ({\n      code: d.code,\n      severity: d.severity,\n      message: d.message,\n    })),\n  };\n\n  await writeOutputFile(outputDir, 'metadata.json', JSON.stringify(metadata, null, 2) + '\\n');\n}\n\n\n"]}

package/dist/edf/header.js

@@ -318,12 +318,28 @@ export function parseHeader(buf, fileSize) {
                     hint: 'It is described in channels.csv but left out of the converted data.',
                 });
             }
-            if (!Number.isFinite(physicalMax - physicalMin)) {
+            /*
+              Too large to represent, and too small — the second was silent.
+      
+              The gain is the span divided by the digital range, and a span of 2e-320 over 65,535
+              codes is 3e-325: below the smallest subnormal double, so it underflows to +0. The
+              scaler's flat-range branch then handed every code the same physical value, and a
+              channel of 65,536 distinct readings became one repeated number with nothing raised at
+              all. One power of ten away, at 1e-319, the same file raises VALUE_RESOLUTION.
+      
+              Both are the same fact about the header — the span cannot be turned into a mapping —
+              so both get this code, and both leave the cells empty rather than filling them with a
+              value the header cannot justify.
+            */
+            const span = physicalMax - physicalMin;
+            const underflowed = span !== 0 && span / (digitalMax - digitalMin) === 0;
+            if (!Number.isFinite(span) || underflowed) {
                 diagnostics.push({
                     code: 'UNUSABLE_PHYSICAL_RANGE',
                     severity: 'warning',
                     message: `Signal ${i} ("${label}") declares a physical range from ${physicalMin} to ` +
-                        `${physicalMax}, whose span is too large to represent, so its values cannot be scaled.`,
+                        `${physicalMax}, whose span is too ${underflowed ? 'small' : 'large'} to ` +
+                        `represent, so its values cannot be scaled.`,
                     hint: 'Its cells are left empty rather than filled with a value the header cannot justify.',
                 });
             }

package/dist/edf/header.js.map

@@ -1 +1 @@
-{"version":3,"file":"header.js","sourceRoot":"","sources":["../../src/edf/header.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA6BG;AAEH,OAAO,EAAE,QAAQ,EAAE,MAAM,aAAa,CAAC;AAEvC,OAAO,EAAE,OAAO,EAAE,MAAM,EAAE,MAAM,mBAAmB,CAAC;AACpD,OAAO,EAAE,YAAY,EAAE,MAAM,YAAY,CAAC;AAE1C,gEAAgE;AAChE,MAAM,CAAC,MAAM,iBAAiB,GAAG,iBAAiB,CAAC;AACnD,uDAAuD;AACvD,MAAM,CAAC,MAAM,qBAAqB,GAAG,iBAAiB,CAAC;AAEvD,MAAM,CAAC,MAAM,kBAAkB,GAAG,GAAG,CAAC;AACtC,MAAM,CAAC,MAAM,mBAAmB,GAAG,GAAG,CAAC;AA2EvC;;;;;;GAMG;AACH,SAAS,kBAAkB,CAAC,SAAiB;IAC3C,MAAM,IAAI,GAAG,SAAS,CAAC,WAAW,CAAC,CAAC,CAAW,CAAC;IAChD,OAAO,IAAI,IAAI,IAAI,IAAI,CAAC,IAAI,IAAI,IAAI,IAAI,IAAI,IAAI,IAAI,CAAC,CAAC;AACxD,CAAC;AAED,MAAM,GAAG,GAAG,CAAC,GAAe,EAAE,KAAa,EAAE,GAAW,EAAU,EAAE,CAClE,YAAY,CAAC,GAAG,EAAE,KAAK,EAAE,KAAK,GAAG,GAAG,CAAC,CAAC;AAExC,8FAA8F;AAC9F,MAAM,SAAS,GAAG,CAAC,CAAS,EAAU,EAAE,CAAC,CAAC,CAAC,OAAO,CAAC,WAAW,EAAE,EAAE,CAAC,CAAC,OAAO,CAAC,OAAO,EAAE,EAAE,CAAC,CAAC;AAEzF;;;;;;;;;;;;;GAaG;AACH,MAAM,UAAU,eAAe,CAAC,KAAiB;IAC/C,MAAM,KAAK,GAAG,MAAM,CAAC,oBAAoB,CAAC,GAAG,CAAC,KAAK,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;IACpE,OAAO,MAAM,CAAC,SAAS,CAAC,KAAK,CAAC,IAAI,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,IAAI,CAAC;AAC7D,CAAC;AAED,4FAA4F;AAC5F,SAAS,oBAAoB,CAAC,GAAW;IACvC,MAAM,IAAI,GAAG,SAAS,CAAC,GAAG,CAAC,CAAC;IAC5B,8EAA8E;IAC9E,IAAI,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,IAAI,CAAC,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,EAAE,CAAC;QAC9C,OAAO,EAAE,IAAI,EAAE,IAAI,CAAC,OAAO,CAAC,GAAG,EAAE,GAAG,CAAC,EAAE,QAAQ,EAAE,IAAI,EAAE,CAAC;IAC1D,CAAC;IACD,OAAO,EAAE,IAAI,EAAE,QAAQ,EAAE,KAAK,EAAE,CAAC;AACnC,CAAC;AAED,SAAS,gBAAgB,CACvB,GAAW,EACX,KAAa,EACb,EAAE,OAAO,GAAG,KAAK,EAAE,QAAQ,KAA2D,EAAE;IAExF,MAAM,UAAU,GAAG,oBAAoB,CAAC,GAAG,CAAC,CAAC;IAC7C,MAAM,IAAI,GAAG,UAAU,CAAC,IAAI,CAAC;IAC7B,IAAI,UAAU,CAAC,QAAQ,IAAI,QAAQ;QAAE,QAAQ,CAAC,KAAK,GAAG,IAAI,CAAC;IAC3D,IAAI,IAAI,KAAK,EAAE,EAAE,CAAC;QAChB,MAAM,IAAI,QAAQ,CAAC,kBAAkB,EAAE,iBAAiB,KAAK,aAAa,CAAC,CAAC;IAC9E,CAAC;IACD,MAAM,CAAC,GAAG,MAAM,CAAC,IAAI,CAAC,CAAC;IACvB,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,CAAC,CAAC,EAAE,CAAC;QACxB,MAAM,IAAI,QAAQ,CAChB,kBAAkB,EAClB,iBAAiB,KAAK,4BAA4B,IAAI,CAAC,SAAS,CAAC,IAAI,CAAC,IAAI,EAC1E,qEAAqE,CACtE,CAAC;IACJ,CAAC;IACD,IAAI,OAAO,IAAI,CAAC,MAAM,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,CAAC;QACpC,MAAM,IAAI,QAAQ,CAChB,kBAAkB,EAClB,iBAAiB,KAAK,mCAAmC,IAAI,CAAC,SAAS,CAAC,IAAI,CAAC,IAAI,CAClF,CAAC;IACJ,CAAC;IACD,OAAO,CAAC,CAAC;AACX,CAAC;AAED;;;GAGG;AACH,SAAS,oBAAoB,CAAC,OAAe,EAAE,OAAe;IAC5D,MAAM,CAAC,GAAG,sCAAsC,CAAC,IAAI,CAAC,SAAS,CAAC,OAAO,CAAC,CAAC,CAAC;IAC1E,MAAM,CAAC,GAAG,sCAAsC,CAAC,IAAI,CAAC,SAAS,CAAC,OAAO,CAAC,CAAC,CAAC;IAC1E,IAAI,CAAC,CAAC,IAAI,CAAC,CAAC;QAAE,OAAO,IAAI,CAAC;IAE1B,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACxB,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACxB,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACxB,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACxB,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACxB,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAExB,IAAI,EAAE,GAAG,CAAC,IAAI,EAAE,GAAG,EAAE,IAAI,EAAE,GAAG,CAAC,IAAI,EAAE,GAAG,EAAE,IAAI,EAAE,GAAG,EAAE,IAAI,EAAE,GAAG,EAAE,IAAI,EAAE,GAAG,EAAE;QAAE,OAAO,IAAI,CAAC;IAEzF,MAAM,IAAI,GAAG,EAAE,IAAI,EAAE,CAAC,CAAC,CAAC,IAAI,GAAG,EAAE,CAAC,CAAC,CAAC,IAAI,GAAG,EAAE,CAAC;IAC9C,MAAM,IAAI,GAAG,IAAI,IAAI,CAAC,IAAI,CAAC,GAAG,CAAC,IAAI,EAAE,EAAE,GAAG,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,EAAE,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC;IAC5E,6CAA6C;IAC7C,IAAI,IAAI,CAAC,WAAW,EAAE,KAAK,EAAE,GAAG,CAAC,IAAI,IAAI,CAAC,UAAU,EAAE,KAAK,EAAE;QAAE,OAAO,IAAI,CAAC;IAC3E,OAAO,IAAI,CAAC;AACd,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,WAAW,CAAC,GAAe,EAAE,QAAgB;IAC3D,MAAM,WAAW,GAAiB,EAAE,CAAC;IACrC,MAAM,QAAQ,GAAG,EAAE,KAAK,EAAE,KAAK,EAAE,CAAC;IAElC,IAAI,GAAG,CAAC,MAAM,GAAG,kBAAkB,EAAE,CAAC;QACpC,MAAM,IAAI,QAAQ,CAChB,gBAAgB,EAChB,WAAW,QAAQ,8CAA8C,kBAAkB,GAAG,CACvF,CAAC;IACJ,CAAC;IAED,6EAA6E;IAC7E,8EAA8E;IAC9E,MAAM,KAAK,GAAG,GAAG,CAAC,CAAC,CAAC,KAAK,IAAI,IAAI,GAAG,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,KAAK,SAAS,CAAC;IAC9D,MAAM,OAAO,GAAG,KAAK,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC;IAE9D,MAAM,SAAS,GAAG,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC;IAC7C,MAAM,WAAW,GAAG,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC;IAChD,MAAM,YAAY,GAAG,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC;IACjD,MAAM,YAAY,GAAG,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC;IACjD,MAAM,WAAW,GAAG,gBAAgB,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,EAAE,wBAAwB,EAAE;QAC/E,OAAO,EAAE,IAAI;QACb,QAAQ;KACT,CAAC,CAAC;IACH,MAAM,QAAQ,GAAG,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,EAAE,CAAC,CAAC,CAAC;IAC9C,MAAM,mBAAmB,GAAG,gBAAgB,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,EAAE,wBAAwB,EAAE;QACvF,OAAO,EAAE,IAAI;QACb,QAAQ;KACT,CAAC,CAAC;IACH,MAAM,cAAc,GAAG,gBAAgB,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,EAAE,2BAA2B,EAAE;QACrF,QAAQ;KACT,CAAC,CAAC;IACH,MAAM,WAAW,GAAG,gBAAgB,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,EAAE,mBAAmB,EAAE;QAC1E,OAAO,EAAE,IAAI;QACb,QAAQ;KACT,CAAC,CAAC;IAEH,IAAI,WAAW,IAAI,CAAC,EAAE,CAAC;QACrB,MAAM,IAAI,QAAQ,CAChB,sBAAsB,EACtB,mBAAmB,WAAW,gCAAgC,CAC/D,CAAC;IACJ,CAAC;IACD,IAAI,CAAC,CAAC,cAAc,GAAG,CAAC,CAAC,EAAE,CAAC;QAC1B,MAAM,IAAI,QAAQ,CAChB,yBAAyB,EACzB,6CAA6C,cAAc,gCAAgC,CAC5F,CAAC;IACJ,CAAC;IAED,MAAM,mBAAmB,GAAG,kBAAkB,GAAG,WAAW,GAAG,mBAAmB,CAAC;IACnF,IAAI,GAAG,CAAC,MAAM,GAAG,mBAAmB,EAAE,CAAC;QACrC,MAAM,IAAI,QAAQ,CAChB,gBAAgB;QAChB;;;;;;;UAOE;QACF,iBAAiB,WAAW,2BAA2B,mBAAmB,gBAAgB;YACxF,CAAC,QAAQ,GAAG,mBAAmB;gBAC7B,CAAC,CAAC,wBAAwB,QAAQ,SAAS;gBAC3C,CAAC,CAAC,YAAY,GAAG,CAAC,MAAM,yCAAyC,CAAC,CACvE,CAAC;IACJ,CAAC;IACD,IAAI,WAAW,KAAK,mBAAmB,EAAE,CAAC;QACxC,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,uBAAuB;YAC7B,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,qBAAqB,WAAW,eAAe,WAAW,mBAAmB;gBAC7E,GAAG,mBAAmB,yDAAyD;SAClF,CAAC,CAAC;IACL,CAAC;IAED,+EAA+E;IAC/E,MAAM,IAAI,GAAG,kBAAkB,CAAC;IAChC,MAAM,SAAS,GAAG,CAAC,WAAmB,EAAE,KAAa,EAAE,CAAS,EAAU,EAAE,CAC1E,GAAG,CAAC,GAAG,EAAE,IAAI,GAAG,WAAW,GAAG,WAAW,GAAG,CAAC,GAAG,KAAK,EAAE,KAAK,CAAC,CAAC;IAEhE,kFAAkF;IAClF,oEAAoE;IACpE,MAAM,aAAa,GAAG,uBAAuB,CAAC,IAAI,CAAC,QAAQ,CAAC,CAAC;IAC7D,MAAM,UAAU,GACd,aAAa,KAAK,IAAI,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,aAAa,CAAC,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,OAAO,CAAC;IAE/E,MAAM,OAAO,GAAgB,EAAE,CAAC;IAChC,IAAI,kBAAkB,GAAG,CAAC,CAAC;IAC3B,MAAM,cAAc,GAAG,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACrC,MAAM,UAAU,GAAG,IAAI,GAAG,EAAoB,CAAC;IAC/C,MAAM,WAAW,GAAa,EAAE,CAAC;IAEjC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;QACrC,MAAM,KAAK,GAAG,SAAS,CAAC,SAAS,CAAC,CAAC,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC;QAC7C,MAAM,UAAU,GAAG,SAAS,CAAC,SAAS,CAAC,EAAE,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC;QACnD,MAAM,iBAAiB,GAAG,SAAS,CAAC,SAAS,CAAC,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC;QACzD,MAAM,WAAW,GAAG,gBAAgB,CAAC,SAAS,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,4BAA4B,CAAC,GAAG,EAAE;YAC3F,QAAQ;SACT,CAAC,CAAC;QACH,MAAM,WAAW,GAAG,gBAAgB,CAAC,SAAS,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,4BAA4B,CAAC,GAAG,EAAE;YAC3F,QAAQ;SACT,CAAC,CAAC;QACH,MAAM,UAAU,GAAG,gBAAgB,CAAC,SAAS,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,2BAA2B,CAAC,GAAG,EAAE;YACzF,OAAO,EAAE,IAAI;YACb,QAAQ;SACT,CAAC,CAAC;QACH,MAAM,UAAU,GAAG,gBAAgB,CAAC,SAAS,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,2BAA2B,CAAC,GAAG,EAAE;YACzF,OAAO,EAAE,IAAI;YACb,QAAQ;SACT,CAAC,CAAC;QACH,MAAM,YAAY,GAAG,SAAS,CAAC,SAAS,CAAC,GAAG,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC;QACtD,MAAM,gBAAgB,GAAG,gBAAgB,CACvC,SAAS,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EACpB,8BAA8B,CAAC,GAAG,EAClC,EAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,EAAE,CAC5B,CAAC;QACF,MAAM,WAAW,GAAG,SAAS,CAAC,SAAS,CAAC,GAAG,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC;QAErD,IAAI,gBAAgB,GAAG,CAAC,EAAE,CAAC;YACzB,MAAM,IAAI,QAAQ,CAChB,kBAAkB,EAClB,UAAU,CAAC,MAAM,KAAK,eAAe,gBAAgB,sBAAsB,CAC5E,CAAC;QACJ,CAAC;QAED,MAAM,aAAa,GAAG,KAAK,KAAK,iBAAiB,IAAI,KAAK,KAAK,qBAAqB,CAAC;QAErF,OAAO,CAAC,IAAI,CAAC;YACX,KAAK,EAAE,CAAC;YACR,KAAK;YACL,UAAU;YACV,iBAAiB;YACjB,WAAW;YACX,WAAW;YACX,UAAU;YACV,UAAU;YACV,YAAY;YACZ,gBAAgB;YAChB,QAAQ,EAAE,WAAW;YACrB,aAAa;YACb,YAAY,EAAE,gBAAgB,GAAG,cAAc;YAC/C,kBAAkB;SACnB,CAAC,CAAC;QACH,kBAAkB,IAAI,gBAAgB,GAAG,cAAc,CAAC;QAExD,IAAI,CAAC,aAAa,EAAE,CAAC;YACnB;;;;;;;;;;;;;;cAcE;YACF;;;;;;;;;;cAUE;YACF,MAAM,OAAO,GAAG,CAAC,GAAG,KAAK,CAAC,CAAC,MAAM,CAAC,kBAAkB,CAAC,CAAC;YACtD,MAAM,MAAM,GAAG,CAAC,GAAG,iBAAiB,CAAC,CAAC,MAAM,CAAC,kBAAkB,CAAC,CAAC;YACjE,MAAM,OAAO,GAAG,CAAC,GAAG,OAAO,EAAE,GAAG,MAAM,CAAC,CAAC;YACxC,IAAI,OAAO,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;gBACvB,MAAM,KAAK,GAAG,CAAC,GAAG,IAAI,GAAG,CAAC,OAAO,CAAC,CAAC;qBAChC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,MAAO,CAAC,CAAC,WAAW,CAAC,CAAC,CAAY,CAAC,QAAQ,CAAC,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,EAAE,CAAC;qBAC9E,IAAI,CAAC,IAAI,CAAC,CAAC;gBACd,MAAM,MAAM,GAAG,OAAO,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC;gBAC/C,MAAM,IAAI,GAAG,OAAO,CAAC,MAAM,GAAG,CAAC,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC;gBACrD,MAAM,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,wBAAwB,CAAC,CAAC,CAAC,OAAO,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,gBAAgB,CAAC,CAAC,CAAC,eAAe,CAAC;gBACxG,kFAAkF;gBAClF,0EAA0E;gBAC1E,MAAM,KAAK,GAAG,IAAI;oBAChB,CAAC,CAAC,2EAA2E;oBAC7E,CAAC,CAAC,OAAO,CAAC,MAAM,GAAG,CAAC;wBAClB,CAAC,CAAC,0CAA0C;wBAC5C,CAAC,CAAC,gDAAgD,CAAC;gBACvD,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,oBAAoB;oBAC1B,QAAQ,EAAE,SAAS;oBACnB,OAAO,EACL,UAAU,CAAC,MAAM,KAAK,IAAI,OAAO,CAAC,MAAM,qBAAqB,MAAM,GAAG;wBACtE,IAAI,KAAK,MAAM,KAAK,kCAAkC;oBACxD,IAAI,EACF,CAAC,OAAO,CAAC,MAAM,GAAG,CAAC;wBACjB,CAAC,CAAC,qDAAqD,CAAC,yBAAyB;4BAC/E,kCAAkC;wBACpC,CAAC,CAAC,iDAAiD,KAAK,sBAAsB,CAAC;wBACjF,2DAA2D;iBAC9D,CAAC,CAAC;YACL,CAAC;YAED,IAAI,KAAK,KAAK,EAAE,EAAE,CAAC;gBACjB,qFAAqF;gBACrF,sFAAsF;gBACtF,2DAA2D;gBAC3D,WAAW,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC;YACtB,CAAC;iBAAM,CAAC;gBACN,0EAA0E;gBAC1E,sEAAsE;gBACtE,MAAM,IAAI,GAAG,UAAU,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC;gBACnC,IAAI,IAAI;oBAAE,IAAI,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC;;oBAClB,UAAU,CAAC,GAAG,CAAC,KAAK,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC;YAClC,CAAC;YAED,IAAI,gBAAgB,KAAK,CAAC,EAAE,CAAC;gBAC3B,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,YAAY;oBAClB,QAAQ,EAAE,SAAS;oBACnB,OAAO,EAAE,UAAU,CAAC,MAAM,KAAK,mDAAmD;oBAClF,IAAI,EAAE,qEAAqE;iBAC5E,CAAC,CAAC;YACL,CAAC;YAED,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,WAAW,GAAG,WAAW,CAAC,EAAE,CAAC;gBAChD,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,yBAAyB;oBAC/B,QAAQ,EAAE,SAAS;oBACnB,OAAO,EACL,UAAU,CAAC,MAAM,KAAK,qCAAqC,WAAW,MAAM;wBAC5E,GAAG,WAAW,yEAAyE;oBACzF,IAAI,EAAE,qFAAqF;iBAC5F,CAAC,CAAC;YACL,CAAC;iBAAM,IAAI,UAAU,KAAK,UAAU,EAAE,CAAC;gBACrC,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,0BAA0B;oBAChC,QAAQ,EAAE,SAAS;oBACnB,OAAO,EACL,UAAU,CAAC,MAAM,KAAK,kDAAkD;wBACxE,IAAI,UAAU,oCAAoC;oBACpD,IAAI,EAAE,qFAAqF;iBAC5F,CAAC,CAAC;YACL,CAAC;iBAAM,IAAI,WAAW,KAAK,WAAW,EAAE,CAAC;gBACvC,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,2BAA2B;oBACjC,QAAQ,EAAE,SAAS;oBACnB,OAAO,EACL,UAAU,CAAC,MAAM,KAAK,oDAAoD;wBAC1E,IAAI,WAAW,gDAAgD;iBAClE,CAAC,CAAC;YACL,CAAC;iBAAM,IAAI,CAAC,WAAW,GAAG,WAAW,CAAC,GAAG,CAAC,UAAU,GAAG,UAAU,CAAC,GAAG,CAAC,EAAE,CAAC;gBACvE;;;;;;;;;;kBAUE;gBACF,MAAM,QAAQ,GACZ,WAAW,GAAG,WAAW;oBACvB,CAAC,CAAC,oBAAoB,WAAW,2BAA2B,WAAW,EAAE;oBACzE,CAAC,CAAC,mBAAmB,UAAU,0BAA0B,UAAU,EAAE,CAAC;gBAC1E,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,yBAAyB;oBAC/B,QAAQ,EAAE,SAAS;oBACnB,OAAO,EAAE,UAAU,CAAC,MAAM,KAAK,eAAe,QAAQ,+BAA+B;oBACrF,IAAI,EAAE,+EAA+E;iBACtF,CAAC,CAAC;YACL,CAAC;QACH,CAAC;IACH,CAAC;IAED;;;;;;;;;;;;;;;;;;MAkBE;IACF,KAAK,MAAM,KAAK,IAAI,WAAW,EAAE,CAAC;QAChC,MAAM,KAAK,GAAG,UAAU,CAAC,GAAG,CAAC,UAAU,KAAK,EAAE,CAAC,CAAC;QAChD,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,aAAa;YACnB,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,KAAK,KAAK,SAAS;gBACjB,CAAC,CAAC,UAAU,KAAK,4CAA4C,KAAK,IAAI;gBACtE,CAAC,CAAC,UAAU,KAAK,+CAA+C,KAAK,YAAY;oBAC/E,GAAG,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC,CAAC,SAAS,IAAI,MAAM,CAAC,KAAK,CAAC,GAAG,CAAC,MAAM,CAAC,CAAC,WAAW;oBACpF,GAAG,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,OAAO,mCAAmC;oBAC9E,uCAAuC;SAC9C,CAAC,CAAC;IACL,CAAC;IAED,KAAK,MAAM,CAAC,KAAK,EAAE,OAAO,CAAC,IAAI,UAAU,EAAE,CAAC;QAC1C,IAAI,OAAO,CAAC,MAAM,GAAG,CAAC;YAAE,SAAS;QACjC,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,iBAAiB;YACvB,QAAQ,EAAE,SAAS;YACnB,OAAO,EAAE,GAAG,OAAO,CAAC,MAAM,6BAA6B,KAAK,gBAAgB,OAAO,CAAC,IAAI,CAAC,IAAI,CAAC,IAAI;YAClG,IAAI,EAAE,iFAAiF;SACxF,CAAC,CAAC;IACL,CAAC;IAED,MAAM,WAAW,GAAG,kBAAkB,CAAC;IACvC,IAAI,WAAW,IAAI,CAAC,EAAE,CAAC;QACrB,MAAM,IAAI,QAAQ,CAChB,YAAY,EACZ,2FAA2F,CAC5F,CAAC;IACJ,CAAC;IAED,IAAI,QAAQ,CAAC,KAAK,EAAE,CAAC;QACnB,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,eAAe;YACrB,QAAQ,EAAE,SAAS;YACnB,OAAO,EAAE,uFAAuF;YAChG,IAAI,EAAE,0EAA0E;SACjF,CAAC,CAAC;IACL,CAAC;IAED,MAAM,SAAS,GAAG,QAAQ,GAAG,mBAAmB,CAAC;IACjD,IAAI,SAAS,GAAG,CAAC,EAAE,CAAC;QAClB,MAAM,IAAI,QAAQ,CAAC,gBAAgB,EAAE,sCAAsC,CAAC,CAAC;IAC/E,CAAC;IACD,MAAM,WAAW,GAAG,IAAI,CAAC,KAAK,CAAC,SAAS,GAAG,WAAW,CAAC,CAAC;IACxD,MAAM,aAAa,GAAG,SAAS,GAAG,WAAW,GAAG,WAAW,CAAC;IAE5D,IAAI,WAAW,KAAK,CAAC,EAAE,CAAC;QACtB,MAAM,IAAI,QAAQ,CAChB,iBAAiB,EACjB,yDAAyD,EACzD,qEAAqE,CACtE,CAAC;IACJ,CAAC;IAED,IAAI,mBAAmB,KAAK,CAAC,CAAC,EAAE,CAAC;QAC/B,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,sBAAsB;YAC5B,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,yFAAyF;gBACzF,+CAA+C,OAAO,CAAC,WAAW,EAAE,QAAQ,CAAC,8BAA8B;SAC9G,CAAC,CAAC;IACL,CAAC;SAAM,IAAI,mBAAmB,KAAK,WAAW,EAAE,CAAC;QAC/C,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,uBAAuB;YAC7B,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,uBAAuB,mBAAmB,sCAAsC;gBAChF,GAAG,WAAW,oBAAoB,OAAO,CAAC,WAAW,EAAE,QAAQ,CAAC,SAAS,WAAW,KAAK,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,KAAK,WAAW;YACtH,IAAI,EACF,mBAAmB,GAAG,WAAW;gBAC/B,CAAC,CAAC,mFAAmF;gBACrF,CAAC,CAAC,4CAA4C;SACnD,CAAC,CAAC;IACL,CAAC;IAED,IAAI,aAAa,GAAG,CAAC,EAAE,CAAC;QACtB,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,gBAAgB;YACtB,QAAQ,EAAE,SAAS;YACnB,OAAO,EAAE,GAAG,OAAO,CAAC,aAAa,EAAE,MAAM,CAAC,wCAAwC,aAAa,KAAK,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,MAAM,WAAW;SAClI,CAAC,CAAC;IACL,CAAC;IAED,MAAM,SAAS,GAAG,UAAU,KAAK,IAAI,CAAC;IACtC,IAAI,UAAU,KAAK,OAAO,EAAE,CAAC;QAC3B,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,eAAe;YACrB,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,4BAA4B,KAAK,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,OAAO,oCAAoC;gBACzF,yBAAyB;YAC3B,IAAI,EAAE,yFAAyF;SAChG,CAAC,CAAC;IACL,CAAC;IAED,MAAM,WAAW,GAAG,OAAO,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,aAAa,CAAC,CAAC;IAC5D,IAAI,WAAW,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QAC7B,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,oBAAoB;YAC1B,QAAQ,EAAE,SAAS;YACnB,OAAO,EAAE,sEAAsE;SAChF,CAAC,CAAC;IACL,CAAC;IAED,uFAAuF;IACvF,wFAAwF;IACxF,sFAAsF;IACtF,wEAAwE;IACxE,MAAM,KAAK,GAAG,IAAI,GAAG,CAAC,WAAW,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,gBAAgB,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,YAAY,CAAC,CAAC,CAAC;IACpG,IAAI,KAAK,CAAC,IAAI,GAAG,CAAC,EAAE,CAAC;QACnB,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,sBAAsB;YAC5B,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,gBAAgB,KAAK,CAAC,IAAI,4BAA4B;gBACtD,IAAI,MAAM,CAAC,WAAW,CAAC,CAAC,GAAG,KAAK,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC,IAAI;YACrF,IAAI,EAAE,mEAAmE;SAC1E,CAAC,CAAC;IACL,CAAC;IAED,OAAO;QACL,MAAM,EAAE;YACN,OAAO;YACP,SAAS;YACT,WAAW;YACX,YAAY;YACZ,YAAY;YACZ,aAAa,EAAE,oBAAoB,CAAC,YAAY,EAAE,YAAY,CAAC;YAC/D,WAAW,EAAE,mBAAmB;YAChC,mBAAmB,EAAE,WAAW;YAChC,QAAQ;YACR,SAAS;YACT,KAAK;YACL,UAAU;YACV,mBAAmB;YACnB,cAAc;YACd,WAAW;YACX,OAAO;YACP,cAAc;YACd,WAAW;SACZ;QACD,WAAW;QACX,aAAa;QACb,WAAW;KACZ,CAAC;AACJ,CAAC;AAED;;;;;;;;;;GAUG;AACH,MAAM,UAAU,eAAe,CAAC,IAAiB;IAC/C,IAAI,CAAC,IAAI;QAAE,OAAO,IAAI,CAAC;IACvB,OAAO,IAAI,CAAC,WAAW,EAAE,CAAC,KAAK,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;AACzC,CAAC;AAED,oDAAoD;AACpD,MAAM,UAAU,cAAc,CAAC,MAAiB;IAC9C,MAAM,IAAI,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC;IAC1C,IAAI,CAAC,MAAM,CAAC,SAAS;QAAE,OAAO,IAAI,CAAC;IACnC,OAAO,GAAG,IAAI,MAAM,MAAM,CAAC,UAAU,KAAK,OAAO,CAAC,CAAC,CAAC,eAAe,CAAC,CAAC,CAAC,YAAY,GAAG,CAAC;AACxF,CAAC;AAED,qEAAqE;AACrE,MAAM,UAAU,UAAU,CAAC,EAAU;IACnC,IAAI,MAAM,CAAC,SAAS,CAAC,EAAE,CAAC;QAAE,OAAO,MAAM,CAAC,EAAE,CAAC,CAAC;IAC5C,MAAM,OAAO,GAAG,MAAM,CAAC,EAAE,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC;IACtC,qFAAqF;IACrF,sFAAsF;IACtF,sFAAsF;IACtF,8EAA8E;IAC9E,IAAI,OAAO,KAAK,CAAC;QAAE,OAAO,EAAE,CAAC,aAAa,CAAC,CAAC,CAAC,CAAC;IAC9C,OAAO,MAAM,CAAC,OAAO,CAAC,CAAC;AACzB,CAAC;AAED;;;;;;;;;;;;;;GAcG;AACH,MAAM,UAAU,WAAW,CAAC,KAAwB;IAClD,MAAM,OAAO,GAAG,KAAK,CAAC,GAAG,CAAC,UAAU,CAAC,CAAC;IACtC,MAAM,QAAQ,GAAG,IAAI,GAAG,CAAC,KAAK,CAAC,CAAC,IAAI,CAAC;IACrC,OAAO,IAAI,GAAG,CAAC,OAAO,CAAC,CAAC,IAAI,KAAK,QAAQ,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,EAAE,CAAC,MAAM,CAAC,EAAE,CAAC,CAAC,CAAC;AACtF,CAAC","sourcesContent":["/**\n * EDF / EDF+ header parsing.\n *\n * Layout (all fields are ASCII, left-justified, space-padded):\n *\n *   fixed header, 256 bytes\n *     0    8   version ('0', or 255 + 'BIOSEMI' for BDF)\n *     8   80   patient identification\n *    88   80   recording identification\n *   168    8   start date  dd.mm.yy\n *   176    8   start time  hh.mm.ss\n *   184    8   number of bytes in the header record\n *   192   44   reserved  ('EDF+C' / 'EDF+D' live here)\n *   236    8   number of data records (-1 if unknown)\n *   244    8   duration of a data record, in seconds (may be fractional)\n *   252    4   number of signals (ns)\n *\n *   signal header, ns * 256 bytes, stored FIELD-major rather than signal-major:\n *   all ns labels, then all ns transducer types, and so on.\n *     ns * 16   label\n *     ns * 80   transducer type\n *     ns *  8   physical dimension\n *     ns *  8   physical minimum\n *     ns *  8   physical maximum\n *     ns *  8   digital minimum\n *     ns *  8   digital maximum\n *     ns * 80   prefiltering\n *     ns *  8   number of samples in each data record\n *     ns * 32   reserved\n */\n\nimport { EdfError } from './errors.js';\nimport type { Diagnostic } from './errors.js';\nimport { counted, listed } from '../format/list.js';\nimport { decodeLatin1 } from './bytes.js';\n\n/** Label the EDF+ spec reserves for the annotations channel. */\nexport const ANNOTATIONS_LABEL = 'EDF Annotations';\n/** BDF+ uses its own spelling for the same channel. */\nexport const BDF_ANNOTATIONS_LABEL = 'BDF Annotations';\n\nexport const FIXED_HEADER_BYTES = 256;\nexport const SIGNAL_HEADER_BYTES = 256;\n\nexport interface EdfSignal {\n  /** Position in the file, 0-based. Stable even when labels collide. */\n  index: number;\n  label: string;\n  transducer: string;\n  physicalDimension: string;\n  physicalMin: number;\n  physicalMax: number;\n  digitalMin: number;\n  digitalMax: number;\n  prefiltering: string;\n  samplesPerRecord: number;\n  reserved: string;\n  /** True for the EDF+ 'EDF Annotations' channel, which carries text, not signal. */\n  isAnnotations: boolean;\n  /** samplesPerRecord / recordDuration, in Hz. */\n  samplingRate: number;\n  /** Byte offset of this signal's samples within one data record. */\n  byteOffsetInRecord: number;\n}\n\nexport interface EdfHeader {\n  version: string;\n  patientId: string;\n  recordingId: string;\n  /** Raw 'dd.mm.yy' as written in the file. */\n  startDateRaw: string;\n  /** Raw 'hh.mm.ss' as written in the file. */\n  startTimeRaw: string;\n  /** Resolved start instant, or null when the file's date/time fields are unusable. */\n  startDateTime: Date | null;\n  /**\n   * Header size in bytes, computed from the signal count rather than read from the field.\n   *\n   * Every data record offset is derived from this, so it has to be the one the layout\n   * actually uses: 256 for the fixed header plus 256 per signal. A writer that fills the\n   * field in carelessly is common enough to have its own warning, HEADER_BYTES_MISMATCH,\n   * and trusting the field over the arithmetic would put every sample at the wrong offset.\n   */\n  headerBytes: number;\n  /**\n   * What the header's own length field says, which need not be the above.\n   *\n   * Exposed for the same reason `declaredRecordCount` is: the two disagreeing is a fact\n   * about the file, and a caller checking how a recording was written should be able to see\n   * what it claimed rather than only what was believed.\n   */\n  declaredHeaderBytes: number;\n  reserved: string;\n  isEdfPlus: boolean;\n  /** True for BioSemi BDF/BDF+ files, whose samples are 3 bytes rather than 2. */\n  isBdf: boolean;\n  /** 'EDF+C' continuous, 'EDF+D' discontinuous, or null for plain EDF. */\n  continuity: 'EDF+C' | 'EDF+D' | null;\n  /** As declared in the header. -1 means \"unknown\", which the spec permits. */\n  declaredRecordCount: number;\n  recordDuration: number;\n  signalCount: number;\n  signals: EdfSignal[];\n  bytesPerSample: number;\n  recordBytes: number;\n}\n\n/** Everything derived by combining the header with the file's real size. */\nexport interface EdfHeaderInfo {\n  header: EdfHeader;\n  /** Record count implied by the actual file size — the one we trust for reading. */\n  recordCount: number;\n  /** Bytes after the last complete data record. */\n  trailingBytes: number;\n  diagnostics: Diagnostic[];\n}\n\n/**\n * A byte the terminal treats as an instruction rather than as text.\n *\n * C0 and C1, plus DEL. Tab is included deliberately: it is harmless to a terminal but it\n * makes a CSV column name that cannot be typed or matched reliably, which is the other half\n * of what this warning is for.\n */\nfunction isControlCharacter(character: string): boolean {\n  const code = character.codePointAt(0) as number;\n  return code <= 0x1f || (code >= 0x7f && code <= 0x9f);\n}\n\nconst dec = (buf: Uint8Array, start: number, len: number): string =>\n  decodeLatin1(buf, start, start + len);\n\n/** EDF fields are space-padded; trailing NULs also occur in files written by sloppy tools. */\nconst trimField = (s: string): string => s.replace(/[\\0\\s]+$/u, '').replace(/^\\s+/u, '');\n\n/**\n * How many signals the fixed header says there are, read exactly as `parseHeader` will.\n *\n * `EdfFile.open` needs this before it can know how much header to read, and it used to work\n * it out with its own `Number(...)` — which was NUL-tolerant but not comma-tolerant, unlike\n * every other numeric field here. A header written with a comma decimal separator, which\n * COMMA_DECIMAL exists to accept and which the documentation lists this field among, was\n * therefore never given its signal headers at all, and the file died on a message that\n * contradicted itself: \"needs a 768-byte header, but the file is only 848 bytes\".\n *\n * Sharing the parse is what keeps the two from disagreeing again about which files are\n * readable. Null means \"not a usable count\", and the caller reads no further header — the\n * real error then comes from `parseHeader`, which is the one place that decides.\n */\nexport function peekSignalCount(fixed: Uint8Array): number | null {\n  const count = Number(normaliseNumberField(dec(fixed, 252, 4)).text);\n  return Number.isInteger(count) && count > 0 ? count : null;\n}\n\n/** A numeric header field, trimmed and with a comma decimal separator turned into a dot. */\nfunction normaliseNumberField(raw: string): { text: string; sawComma: boolean } {\n  const text = trimField(raw);\n  // Some writers emit a comma decimal separator despite the spec requiring '.'.\n  if (text.includes(',') && !text.includes('.')) {\n    return { text: text.replace(',', '.'), sawComma: true };\n  }\n  return { text, sawComma: false };\n}\n\nfunction parseNumberField(\n  raw: string,\n  field: string,\n  { integer = false, sawComma }: { integer?: boolean; sawComma?: { value: boolean } } = {},\n): number {\n  const normalised = normaliseNumberField(raw);\n  const text = normalised.text;\n  if (normalised.sawComma && sawComma) sawComma.value = true;\n  if (text === '') {\n    throw new EdfError('BAD_HEADER_FIELD', `Header field \"${field}\" is empty.`);\n  }\n  const n = Number(text);\n  if (!Number.isFinite(n)) {\n    throw new EdfError(\n      'BAD_HEADER_FIELD',\n      `Header field \"${field}\" is not a number (found ${JSON.stringify(text)}).`,\n      'The file may be truncated, byte-shifted, or not an EDF file at all.',\n    );\n  }\n  if (integer && !Number.isInteger(n)) {\n    throw new EdfError(\n      'BAD_HEADER_FIELD',\n      `Header field \"${field}\" must be a whole number (found ${JSON.stringify(text)}).`,\n    );\n  }\n  return n;\n}\n\n/**\n * EDF stores a two-digit year. The spec pins the century: 85-99 mean 1985-1999\n * and 00-84 mean 2000-2084. Files outside 1985-2084 cannot express their date.\n */\nfunction resolveStartDateTime(dateRaw: string, timeRaw: string): Date | null {\n  const d = /^(\\d{2})[.\\-/](\\d{2})[.\\-/](\\d{2})$/u.exec(trimField(dateRaw));\n  const t = /^(\\d{2})[.:\\-](\\d{2})[.:\\-](\\d{2})$/u.exec(trimField(timeRaw));\n  if (!d || !t) return null;\n\n  const dd = Number(d[1]);\n  const mm = Number(d[2]);\n  const yy = Number(d[3]);\n  const hh = Number(t[1]);\n  const mi = Number(t[2]);\n  const ss = Number(t[3]);\n\n  if (mm < 1 || mm > 12 || dd < 1 || dd > 31 || hh > 23 || mi > 59 || ss > 60) return null;\n\n  const year = yy >= 85 ? 1900 + yy : 2000 + yy;\n  const date = new Date(Date.UTC(year, mm - 1, dd, hh, mi, Math.min(ss, 59)));\n  // Reject dates that rolled over, e.g. 31.02.\n  if (date.getUTCMonth() !== mm - 1 || date.getUTCDate() !== dd) return null;\n  return date;\n}\n\n/**\n * Parse the fixed 256-byte header plus the per-signal header block.\n *\n * @param buf   At least FIXED_HEADER_BYTES + ns * SIGNAL_HEADER_BYTES bytes.\n * @param fileSize Total size of the file on disk, used to derive the real record count.\n */\nexport function parseHeader(buf: Uint8Array, fileSize: number): EdfHeaderInfo {\n  const diagnostics: Diagnostic[] = [];\n  const sawComma = { value: false };\n\n  if (buf.length < FIXED_HEADER_BYTES) {\n    throw new EdfError(\n      'FILE_TOO_SMALL',\n      `File is ${fileSize} bytes; an EDF header alone needs at least ${FIXED_HEADER_BYTES}.`,\n    );\n  }\n\n  // BDF (BioSemi) marks itself with byte 255 followed by 'BIOSEMI', and stores\n  // 3-byte samples instead of 2. Everything else about the layout is identical.\n  const isBdf = buf[0] === 0xff && dec(buf, 1, 7) === 'BIOSEMI';\n  const version = isBdf ? 'BIOSEMI' : trimField(dec(buf, 0, 8));\n\n  const patientId = trimField(dec(buf, 8, 80));\n  const recordingId = trimField(dec(buf, 88, 80));\n  const startDateRaw = trimField(dec(buf, 168, 8));\n  const startTimeRaw = trimField(dec(buf, 176, 8));\n  const headerBytes = parseNumberField(dec(buf, 184, 8), 'number of header bytes', {\n    integer: true,\n    sawComma,\n  });\n  const reserved = trimField(dec(buf, 192, 44));\n  const declaredRecordCount = parseNumberField(dec(buf, 236, 8), 'number of data records', {\n    integer: true,\n    sawComma,\n  });\n  const recordDuration = parseNumberField(dec(buf, 244, 8), 'duration of a data record', {\n    sawComma,\n  });\n  const signalCount = parseNumberField(dec(buf, 252, 4), 'number of signals', {\n    integer: true,\n    sawComma,\n  });\n\n  if (signalCount <= 0) {\n    throw new EdfError(\n      'INVALID_SIGNAL_COUNT',\n      `Header declares ${signalCount} signals; expected at least 1.`,\n    );\n  }\n  if (!(recordDuration > 0)) {\n    throw new EdfError(\n      'INVALID_RECORD_DURATION',\n      `Header declares a data record duration of ${recordDuration}s; expected a positive number.`,\n    );\n  }\n\n  const expectedHeaderBytes = FIXED_HEADER_BYTES + signalCount * SIGNAL_HEADER_BYTES;\n  if (buf.length < expectedHeaderBytes) {\n    throw new EdfError(\n      'FILE_TOO_SMALL',\n      /*\n        Which of the two is actually short.\n\n        The file size was quoted either way, so a caller that had read too little — the\n        signal count parsed one way here and another way there — produced arithmetic that\n        refuted itself: \"needs a 768-byte header, but the file is only 848 bytes\". A reader\n        following that looks for a truncation that is not there.\n      */\n      `File declares ${signalCount} signals, which needs a ${expectedHeaderBytes}-byte header, ` +\n        (fileSize < expectedHeaderBytes\n          ? `but the file is only ${fileSize} bytes.`\n          : `but only ${buf.length} bytes of it were handed to the parser.`),\n    );\n  }\n  if (headerBytes !== expectedHeaderBytes) {\n    diagnostics.push({\n      code: 'HEADER_BYTES_MISMATCH',\n      severity: 'warning',\n      message:\n        `Header says it is ${headerBytes} bytes, but ${signalCount} signals require ` +\n        `${expectedHeaderBytes} bytes. Using the value computed from the signal count.`,\n    });\n  }\n\n  // Signal headers are field-major: all labels, then all transducers, and so on.\n  const base = FIXED_HEADER_BYTES;\n  const readField = (offsetUnits: number, width: number, i: number): string =>\n    dec(buf, base + offsetUnits * signalCount + i * width, width);\n\n  // EDF+ writes 'EDF+C'/'EDF+D' here; BDF+ writes 'BDF+C'/'BDF+D'. The two mean the\n  // same thing, so both are normalised to a single continuity marker.\n  const continuityTag = /^(?:EDF|BDF)\\+([CD])/u.exec(reserved);\n  const continuity: 'EDF+C' | 'EDF+D' | null =\n    continuityTag === null ? null : continuityTag[1] === 'D' ? 'EDF+D' : 'EDF+C';\n\n  const signals: EdfSignal[] = [];\n  let byteOffsetInRecord = 0;\n  const bytesPerSample = isBdf ? 3 : 2;\n  const seenLabels = new Map<string, number[]>();\n  const emptyLabels: number[] = [];\n\n  for (let i = 0; i < signalCount; i++) {\n    const label = trimField(readField(0, 16, i));\n    const transducer = trimField(readField(16, 80, i));\n    const physicalDimension = trimField(readField(96, 8, i));\n    const physicalMin = parseNumberField(readField(104, 8, i), `physical minimum (signal ${i})`, {\n      sawComma,\n    });\n    const physicalMax = parseNumberField(readField(112, 8, i), `physical maximum (signal ${i})`, {\n      sawComma,\n    });\n    const digitalMin = parseNumberField(readField(120, 8, i), `digital minimum (signal ${i})`, {\n      integer: true,\n      sawComma,\n    });\n    const digitalMax = parseNumberField(readField(128, 8, i), `digital maximum (signal ${i})`, {\n      integer: true,\n      sawComma,\n    });\n    const prefiltering = trimField(readField(136, 80, i));\n    const samplesPerRecord = parseNumberField(\n      readField(216, 8, i),\n      `samples per record (signal ${i})`,\n      { integer: true, sawComma },\n    );\n    const sigReserved = trimField(readField(224, 32, i));\n\n    if (samplesPerRecord < 0) {\n      throw new EdfError(\n        'BAD_HEADER_FIELD',\n        `Signal ${i} (\"${label}\") declares ${samplesPerRecord} samples per record.`,\n      );\n    }\n\n    const isAnnotations = label === ANNOTATIONS_LABEL || label === BDF_ANNOTATIONS_LABEL;\n\n    signals.push({\n      index: i,\n      label,\n      transducer,\n      physicalDimension,\n      physicalMin,\n      physicalMax,\n      digitalMin,\n      digitalMax,\n      prefiltering,\n      samplesPerRecord,\n      reserved: sigReserved,\n      isAnnotations,\n      samplingRate: samplesPerRecord / recordDuration,\n      byteOffsetInRecord,\n    });\n    byteOffsetInRecord += samplesPerRecord * bytesPerSample;\n\n    if (!isAnnotations) {\n      /*\n        A label is free text out of the file, and it becomes a column name in signals.csv.\n\n        `--info` has escaped control bytes since it was written, because an ANSI escape in a\n        header can drive the reader's terminal — `\\x1b[2J` clears the screen. The CSV had no\n        such protection and needed none for correctness: quoting makes any byte safe for a\n        parser, and this still passes the label through exactly as the file gives it, because\n        losing what the header says is not an improvement.\n\n        What was missing is the sentence saying so. A recording whose channel is labelled\n        `\\x1b[2Jgone` converted with no warning at all, and `cat signals.csv` then cleared\n        the terminal — while a script referencing that column by name carried an invisible\n        control character in it. NONPRINTABLE_LABEL has been declared and documented as\n        reserved since 0.1; this is it doing its job.\n      */\n      /*\n        Which of the two fields carries them, because the consequences are not the same.\n\n        The message said \"label or unit\", and then said the bytes \"will appear in the CSV\n        column name\" and that \"the name cannot be typed\" — both of which are about the label.\n        A channel labelled plainly `ECG` in a unit of `u\\x07V` got all of it: its column is\n        `ECG`, `--channels ECG` selects it and exits 0, and the byte is in channels.csv's\n        `unit` cell, which the warning never mentioned. Three sentences, none of them true of\n        the file that raised it, on a warning whose whole purpose is to say where an invisible\n        byte went.\n      */\n      const inLabel = [...label].filter(isControlCharacter);\n      const inUnit = [...physicalDimension].filter(isControlCharacter);\n      const control = [...inLabel, ...inUnit];\n      if (control.length > 0) {\n        const shown = [...new Set(control)]\n          .map((c) => `\\\\x${(c.codePointAt(0) as number).toString(16).padStart(2, '0')}`)\n          .join(', ');\n        const plural = control.length === 1 ? '' : 's';\n        const both = inLabel.length > 0 && inUnit.length > 0;\n        const field = both ? 'label and unit contain' : inLabel.length > 0 ? 'label contains' : 'unit contains';\n        // Where they land, which is the question the reader has. A label becomes a column\n        // name in signals.csv; a unit is a cell of channels.csv and nothing else.\n        const lands = both\n          ? 'which will appear in the CSV column name and in channels.csv\\'s unit cell'\n          : inLabel.length > 0\n            ? 'which will appear in the CSV column name'\n            : 'which will appear in channels.csv\\'s unit cell';\n        diagnostics.push({\n          code: 'NONPRINTABLE_LABEL',\n          severity: 'warning',\n          message:\n            `Signal ${i}'s ${field} ${control.length} control character${plural} ` +\n            `(${shown}), ${lands} exactly as the header has them.`,\n          hint:\n            (inLabel.length > 0\n              ? `Address the channel by position with --channels \"#${i}\" rather than by name, ` +\n                'since the name cannot be typed. '\n              : `The column name is unaffected, so --channels \"${label}\" still selects it. `) +\n            'Printing the CSV to a terminal may do more than print it.',\n        });\n      }\n\n      if (label === '') {\n        // Collected, not reported here: what this channel's column ends up called depends on\n        // whether some later channel is literally labelled `signal_<i>`, and inside this loop\n        // the later channels do not exist yet. See the pass below.\n        emptyLabels.push(i);\n      } else {\n        // Collected rather than reported here: a label repeated five times should\n        // produce one warning naming all five, not four near-identical pairs.\n        const seen = seenLabels.get(label);\n        if (seen) seen.push(i);\n        else seenLabels.set(label, [i]);\n      }\n\n      if (samplesPerRecord === 0) {\n        diagnostics.push({\n          code: 'NO_SAMPLES',\n          severity: 'warning',\n          message: `Signal ${i} (\"${label}\") carries no samples at all (0 per data record).`,\n          hint: 'It is described in channels.csv but left out of the converted data.',\n        });\n      }\n\n      if (!Number.isFinite(physicalMax - physicalMin)) {\n        diagnostics.push({\n          code: 'UNUSABLE_PHYSICAL_RANGE',\n          severity: 'warning',\n          message:\n            `Signal ${i} (\"${label}\") declares a physical range from ${physicalMin} to ` +\n            `${physicalMax}, whose span is too large to represent, so its values cannot be scaled.`,\n          hint: 'Its cells are left empty rather than filled with a value the header cannot justify.',\n        });\n      } else if (digitalMax === digitalMin) {\n        diagnostics.push({\n          code: 'DEGENERATE_DIGITAL_RANGE',\n          severity: 'warning',\n          message:\n            `Signal ${i} (\"${label}\") has digital minimum equal to digital maximum ` +\n            `(${digitalMin}), so its values cannot be scaled.`,\n          hint: 'Its cells are left empty rather than filled with a value the header cannot justify.',\n        });\n      } else if (physicalMax === physicalMin) {\n        diagnostics.push({\n          code: 'DEGENERATE_PHYSICAL_RANGE',\n          severity: 'warning',\n          message:\n            `Signal ${i} (\"${label}\") has physical minimum equal to physical maximum ` +\n            `(${physicalMin}), so every sample converts to the same value.`,\n        });\n      } else if ((physicalMax - physicalMin) * (digitalMax - digitalMin) < 0) {\n        /*\n          Polarity is inverted when the gain is negative, and the gain is\n          (physicalMax - physicalMin) / (digitalMax - digitalMin) — so it is the sign of the\n          two spans together that matters, not the physical pair alone.\n\n          Testing only `physicalMax < physicalMin` was wrong in both directions. A file with\n          its DIGITAL bounds reversed is just as inverted and drew no warning at all, handing\n          back sign-flipped EEG with nothing to indicate it. A file with BOTH pairs reversed\n          has a positive gain and is not inverted, yet was warned about — a message that was\n          simply untrue of that recording.\n        */\n        const reversed =\n          physicalMax < physicalMin\n            ? `physical minimum ${physicalMin} above physical maximum ${physicalMax}`\n            : `digital minimum ${digitalMin} above digital maximum ${digitalMax}`;\n        diagnostics.push({\n          code: 'INVERTED_PHYSICAL_RANGE',\n          severity: 'warning',\n          message: `Signal ${i} (\"${label}\") declares ${reversed}, which inverts its polarity.`,\n          hint: 'The values are converted exactly as the header specifies, inversion included.',\n        });\n      }\n    }\n  }\n\n  /*\n    What an unlabelled channel is actually called, which the message used to guess.\n\n    A channel with no label takes `signal_<index>` — unless another channel is literally\n    labelled that, which EDF permits, since labels are free text and nothing enforces anything\n    about them. Then both collide and both are suffixed. The warning said \"It will appear as\n    \"signal_0\"\" while the file's header read `time_s,signal_0_ch0,signal_0_ch1`: the one\n    sentence the run printed named a column that exists in neither signals.csv nor\n    channels.csv.\n\n    The other half was silent. The channel that genuinely carries the label `signal_0` lost\n    its own column name to a collision with a synthesised one, and nothing said so —\n    DUPLICATE_LABEL did not fire, because the two labels are not the same label. Both halves\n    are one sentence here, because they are one event.\n\n    No specific suffixed name is quoted. The suffix rule has a second pass for names that are\n    still shared afterwards, and a message that hard-coded `_ch<index>` would be guessing again\n    in exactly the way this is fixing.\n  */\n  for (const index of emptyLabels) {\n    const taken = seenLabels.get(`signal_${index}`);\n    diagnostics.push({\n      code: 'EMPTY_LABEL',\n      severity: 'warning',\n      message:\n        taken === undefined\n          ? `Signal ${index} has no label. It will appear as \"signal_${index}\".`\n          : `Signal ${index} has no label, so it takes the name \"signal_${index}\" — which ` +\n            `${taken.length === 1 ? 'signal' : 'signals'} ${listed(taken.map(String))} already ` +\n            `${taken.length === 1 ? 'carries' : 'carry'} as a label, so both columns are ` +\n            `suffixed with their position instead.`,\n    });\n  }\n\n  for (const [label, indices] of seenLabels) {\n    if (indices.length < 2) continue;\n    diagnostics.push({\n      code: 'DUPLICATE_LABEL',\n      severity: 'warning',\n      message: `${indices.length} signals share the label \"${label}\" (positions ${indices.join(', ')}).`,\n      hint: 'Their columns are suffixed with the signal number so they stay distinguishable.',\n    });\n  }\n\n  const recordBytes = byteOffsetInRecord;\n  if (recordBytes <= 0) {\n    throw new EdfError(\n      'NO_SAMPLES',\n      'No signal in this file carries any samples (every channel declares 0 samples per record).',\n    );\n  }\n\n  if (sawComma.value) {\n    diagnostics.push({\n      code: 'COMMA_DECIMAL',\n      severity: 'warning',\n      message: 'Some header numbers use a comma decimal separator, which the EDF spec does not allow.',\n      hint: 'They were read as decimal points. Check the values in the channel table.',\n    });\n  }\n\n  const dataBytes = fileSize - expectedHeaderBytes;\n  if (dataBytes < 0) {\n    throw new EdfError('FILE_TOO_SMALL', `File is smaller than its own header.`);\n  }\n  const recordCount = Math.floor(dataBytes / recordBytes);\n  const trailingBytes = dataBytes - recordCount * recordBytes;\n\n  if (recordCount === 0) {\n    throw new EdfError(\n      'NO_DATA_RECORDS',\n      'The file contains a header but no complete data record.',\n      'The recording was probably interrupted before any data was written.',\n    );\n  }\n\n  if (declaredRecordCount === -1) {\n    diagnostics.push({\n      code: 'RECORD_COUNT_UNKNOWN',\n      severity: 'warning',\n      message:\n        `The header does not say how many data records the file has (-1), which the spec allows ` +\n        `for recordings still in progress. Using the ${counted(recordCount, 'record')} the file actually contains.`,\n    });\n  } else if (declaredRecordCount !== recordCount) {\n    diagnostics.push({\n      code: 'RECORD_COUNT_MISMATCH',\n      severity: 'warning',\n      message:\n        `The header declares ${declaredRecordCount} data records but the file contains ` +\n        `${recordCount}. Converting the ${counted(recordCount, 'record')} that ${recordCount === 1 ? 'is' : 'are'} present.`,\n      hint:\n        declaredRecordCount > recordCount\n          ? 'The recording looks truncated. It may have been cut short or copied incompletely.'\n          : 'The file is longer than its header claims.',\n    });\n  }\n\n  if (trailingBytes > 0) {\n    diagnostics.push({\n      code: 'TRAILING_BYTES',\n      severity: 'warning',\n      message: `${counted(trailingBytes, 'byte')} after the last complete data record ${trailingBytes === 1 ? 'was' : 'were'} ignored.`,\n    });\n  }\n\n  const isEdfPlus = continuity !== null;\n  if (continuity === 'EDF+D') {\n    diagnostics.push({\n      code: 'DISCONTINUOUS',\n      severity: 'warning',\n      message:\n        `This is a discontinuous (${isBdf ? 'BDF+D' : 'EDF+D'}) recording: its data records are ` +\n        `not contiguous in time.`,\n      hint: 'Each row carries its true recording time, so gaps stay visible instead of being closed.',\n    });\n  }\n\n  const dataSignals = signals.filter((s) => !s.isAnnotations);\n  if (dataSignals.length === 0) {\n    diagnostics.push({\n      code: 'NO_SIGNAL_CHANNELS',\n      severity: 'warning',\n      message: 'This file has no signal channels; it contains only EDF+ annotations.',\n    });\n  }\n\n  // A channel declaring zero samples per record has no sampling rate to speak of — it is\n  // reported separately as NO_SAMPLES and no file is written for it. Counting its nominal\n  // 0 Hz as a rate made a single-rate recording warn that it used \"2 different sampling\n  // rates (4 Hz, 0 Hz)\" and claim it was splitting output it never split.\n  const rates = new Set(dataSignals.filter((s) => s.samplesPerRecord > 0).map((s) => s.samplingRate));\n  if (rates.size > 1) {\n    diagnostics.push({\n      code: 'MIXED_SAMPLING_RATES',\n      severity: 'warning',\n      message:\n        `Channels use ${rates.size} different sampling rates ` +\n        `(${listed(formatRates([...rates].sort((a, b) => b - a)).map((r) => `${r} Hz`))}).`,\n      hint: 'They are written to one file per rate so no channel is resampled.',\n    });\n  }\n\n  return {\n    header: {\n      version,\n      patientId,\n      recordingId,\n      startDateRaw,\n      startTimeRaw,\n      startDateTime: resolveStartDateTime(startDateRaw, startTimeRaw),\n      headerBytes: expectedHeaderBytes,\n      declaredHeaderBytes: headerBytes,\n      reserved,\n      isEdfPlus,\n      isBdf,\n      continuity,\n      declaredRecordCount,\n      recordDuration,\n      signalCount,\n      signals,\n      bytesPerSample,\n      recordBytes,\n    },\n    recordCount,\n    trailingBytes,\n    diagnostics,\n  };\n}\n\n/**\n * The recording start as a zone-less wall clock, \"YYYY-MM-DDTHH:MM:SS\".\n *\n * EDF stores the start time as local wall-clock digits with no timezone anywhere in\n * the format. `startDateTime` is built with Date.UTC purely so those digits survive a\n * round trip unshifted, which makes it a carrier for the wall clock rather than a\n * real instant. Serialising it with `toISOString()` would append a Z and assert UTC,\n * and any reader converting to local time would then shift the recording by their own\n * offset: 13:43:04 in the file becomes 08:43:04 in New York. The Z is omitted because\n * the file genuinely does not say which zone it meant.\n */\nexport function formatWallClock(date: Date | null): string | null {\n  if (!date) return null;\n  return date.toISOString().slice(0, 19);\n}\n\n/** \"EDF\", \"EDF+ (EDF+D)\", \"BDF\", \"BDF+ (EDF+C)\". */\nexport function describeFormat(header: EdfHeader): string {\n  const base = header.isBdf ? 'BDF' : 'EDF';\n  if (!header.isEdfPlus) return base;\n  return `${base}+ (${header.continuity === 'EDF+D' ? 'discontinuous' : 'continuous'})`;\n}\n\n/** Render a sampling rate without trailing noise: 256, 0.5, 12.5. */\nexport function formatRate(hz: number): string {\n  if (Number.isInteger(hz)) return String(hz);\n  const rounded = Number(hz.toFixed(6));\n  // A rate below 5e-7 rounds away to \"0\", which reads as \"this channel has no sampling\n  // rate\" and made the mixed-rate warning contradict itself: it announced two different\n  // rates and then printed both as \"0 Hz\". Exponent form keeps a real rate legible, and\n  // keeps distinct rates distinct in the channel table and in output filenames.\n  if (rounded === 0) return hz.toExponential(3);\n  return String(rounded);\n}\n\n/**\n * Renders a group of rates so that rates which differ read as differing.\n *\n * `formatRate` rounds to six decimals, which is what keeps an ordinary rate free of\n * float noise — 30 samples in a 0.1-second record is 299.99999999999994 as a double,\n * and belongs on screen as 300. Two rates separated by less than that round to one\n * string, so a file carrying 1e-6 Hz and 1.25e-6 Hz warned that it used \"2 different\n * sampling rates (0.000001 Hz, 0.000001 Hz)\" and named both files the same thing.\n *\n * That is the contradiction the exponent fallback above already removes for rates that\n * round away to zero; this is the same one a step further out. On a collision every rate\n * in the group switches to its shortest exact form, which is unique for distinct values,\n * rather than only the pair that collided — one column in one notation reads better than\n * two.\n */\nexport function formatRates(rates: readonly number[]): string[] {\n  const rounded = rates.map(formatRate);\n  const distinct = new Set(rates).size;\n  return new Set(rounded).size === distinct ? rounded : rates.map((hz) => String(hz));\n}\n"]}
+{"version":3,"file":"header.js","sourceRoot":"","sources":["../../src/edf/header.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA6BG;AAEH,OAAO,EAAE,QAAQ,EAAE,MAAM,aAAa,CAAC;AAEvC,OAAO,EAAE,OAAO,EAAE,MAAM,EAAE,MAAM,mBAAmB,CAAC;AACpD,OAAO,EAAE,YAAY,EAAE,MAAM,YAAY,CAAC;AAE1C,gEAAgE;AAChE,MAAM,CAAC,MAAM,iBAAiB,GAAG,iBAAiB,CAAC;AACnD,uDAAuD;AACvD,MAAM,CAAC,MAAM,qBAAqB,GAAG,iBAAiB,CAAC;AAEvD,MAAM,CAAC,MAAM,kBAAkB,GAAG,GAAG,CAAC;AACtC,MAAM,CAAC,MAAM,mBAAmB,GAAG,GAAG,CAAC;AA2EvC;;;;;;GAMG;AACH,SAAS,kBAAkB,CAAC,SAAiB;IAC3C,MAAM,IAAI,GAAG,SAAS,CAAC,WAAW,CAAC,CAAC,CAAW,CAAC;IAChD,OAAO,IAAI,IAAI,IAAI,IAAI,CAAC,IAAI,IAAI,IAAI,IAAI,IAAI,IAAI,IAAI,CAAC,CAAC;AACxD,CAAC;AAED,MAAM,GAAG,GAAG,CAAC,GAAe,EAAE,KAAa,EAAE,GAAW,EAAU,EAAE,CAClE,YAAY,CAAC,GAAG,EAAE,KAAK,EAAE,KAAK,GAAG,GAAG,CAAC,CAAC;AAExC,8FAA8F;AAC9F,MAAM,SAAS,GAAG,CAAC,CAAS,EAAU,EAAE,CAAC,CAAC,CAAC,OAAO,CAAC,WAAW,EAAE,EAAE,CAAC,CAAC,OAAO,CAAC,OAAO,EAAE,EAAE,CAAC,CAAC;AAEzF;;;;;;;;;;;;;GAaG;AACH,MAAM,UAAU,eAAe,CAAC,KAAiB;IAC/C,MAAM,KAAK,GAAG,MAAM,CAAC,oBAAoB,CAAC,GAAG,CAAC,KAAK,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;IACpE,OAAO,MAAM,CAAC,SAAS,CAAC,KAAK,CAAC,IAAI,KAAK,GAAG,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,IAAI,CAAC;AAC7D,CAAC;AAED,4FAA4F;AAC5F,SAAS,oBAAoB,CAAC,GAAW;IACvC,MAAM,IAAI,GAAG,SAAS,CAAC,GAAG,CAAC,CAAC;IAC5B,8EAA8E;IAC9E,IAAI,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,IAAI,CAAC,IAAI,CAAC,QAAQ,CAAC,GAAG,CAAC,EAAE,CAAC;QAC9C,OAAO,EAAE,IAAI,EAAE,IAAI,CAAC,OAAO,CAAC,GAAG,EAAE,GAAG,CAAC,EAAE,QAAQ,EAAE,IAAI,EAAE,CAAC;IAC1D,CAAC;IACD,OAAO,EAAE,IAAI,EAAE,QAAQ,EAAE,KAAK,EAAE,CAAC;AACnC,CAAC;AAED,SAAS,gBAAgB,CACvB,GAAW,EACX,KAAa,EACb,EAAE,OAAO,GAAG,KAAK,EAAE,QAAQ,KAA2D,EAAE;IAExF,MAAM,UAAU,GAAG,oBAAoB,CAAC,GAAG,CAAC,CAAC;IAC7C,MAAM,IAAI,GAAG,UAAU,CAAC,IAAI,CAAC;IAC7B,IAAI,UAAU,CAAC,QAAQ,IAAI,QAAQ;QAAE,QAAQ,CAAC,KAAK,GAAG,IAAI,CAAC;IAC3D,IAAI,IAAI,KAAK,EAAE,EAAE,CAAC;QAChB,MAAM,IAAI,QAAQ,CAAC,kBAAkB,EAAE,iBAAiB,KAAK,aAAa,CAAC,CAAC;IAC9E,CAAC;IACD,MAAM,CAAC,GAAG,MAAM,CAAC,IAAI,CAAC,CAAC;IACvB,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,CAAC,CAAC,EAAE,CAAC;QACxB,MAAM,IAAI,QAAQ,CAChB,kBAAkB,EAClB,iBAAiB,KAAK,4BAA4B,IAAI,CAAC,SAAS,CAAC,IAAI,CAAC,IAAI,EAC1E,qEAAqE,CACtE,CAAC;IACJ,CAAC;IACD,IAAI,OAAO,IAAI,CAAC,MAAM,CAAC,SAAS,CAAC,CAAC,CAAC,EAAE,CAAC;QACpC,MAAM,IAAI,QAAQ,CAChB,kBAAkB,EAClB,iBAAiB,KAAK,mCAAmC,IAAI,CAAC,SAAS,CAAC,IAAI,CAAC,IAAI,CAClF,CAAC;IACJ,CAAC;IACD,OAAO,CAAC,CAAC;AACX,CAAC;AAED;;;GAGG;AACH,SAAS,oBAAoB,CAAC,OAAe,EAAE,OAAe;IAC5D,MAAM,CAAC,GAAG,sCAAsC,CAAC,IAAI,CAAC,SAAS,CAAC,OAAO,CAAC,CAAC,CAAC;IAC1E,MAAM,CAAC,GAAG,sCAAsC,CAAC,IAAI,CAAC,SAAS,CAAC,OAAO,CAAC,CAAC,CAAC;IAC1E,IAAI,CAAC,CAAC,IAAI,CAAC,CAAC;QAAE,OAAO,IAAI,CAAC;IAE1B,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACxB,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACxB,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACxB,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACxB,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACxB,MAAM,EAAE,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAExB,IAAI,EAAE,GAAG,CAAC,IAAI,EAAE,GAAG,EAAE,IAAI,EAAE,GAAG,CAAC,IAAI,EAAE,GAAG,EAAE,IAAI,EAAE,GAAG,EAAE,IAAI,EAAE,GAAG,EAAE,IAAI,EAAE,GAAG,EAAE;QAAE,OAAO,IAAI,CAAC;IAEzF,MAAM,IAAI,GAAG,EAAE,IAAI,EAAE,CAAC,CAAC,CAAC,IAAI,GAAG,EAAE,CAAC,CAAC,CAAC,IAAI,GAAG,EAAE,CAAC;IAC9C,MAAM,IAAI,GAAG,IAAI,IAAI,CAAC,IAAI,CAAC,GAAG,CAAC,IAAI,EAAE,EAAE,GAAG,CAAC,EAAE,EAAE,EAAE,EAAE,EAAE,EAAE,EAAE,IAAI,CAAC,GAAG,CAAC,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC;IAC5E,6CAA6C;IAC7C,IAAI,IAAI,CAAC,WAAW,EAAE,KAAK,EAAE,GAAG,CAAC,IAAI,IAAI,CAAC,UAAU,EAAE,KAAK,EAAE;QAAE,OAAO,IAAI,CAAC;IAC3E,OAAO,IAAI,CAAC;AACd,CAAC;AAED;;;;;GAKG;AACH,MAAM,UAAU,WAAW,CAAC,GAAe,EAAE,QAAgB;IAC3D,MAAM,WAAW,GAAiB,EAAE,CAAC;IACrC,MAAM,QAAQ,GAAG,EAAE,KAAK,EAAE,KAAK,EAAE,CAAC;IAElC,IAAI,GAAG,CAAC,MAAM,GAAG,kBAAkB,EAAE,CAAC;QACpC,MAAM,IAAI,QAAQ,CAChB,gBAAgB,EAChB,WAAW,QAAQ,8CAA8C,kBAAkB,GAAG,CACvF,CAAC;IACJ,CAAC;IAED,6EAA6E;IAC7E,8EAA8E;IAC9E,MAAM,KAAK,GAAG,GAAG,CAAC,CAAC,CAAC,KAAK,IAAI,IAAI,GAAG,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,KAAK,SAAS,CAAC;IAC9D,MAAM,OAAO,GAAG,KAAK,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC;IAE9D,MAAM,SAAS,GAAG,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC;IAC7C,MAAM,WAAW,GAAG,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC;IAChD,MAAM,YAAY,GAAG,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC;IACjD,MAAM,YAAY,GAAG,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,CAAC,CAAC;IACjD,MAAM,WAAW,GAAG,gBAAgB,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,EAAE,wBAAwB,EAAE;QAC/E,OAAO,EAAE,IAAI;QACb,QAAQ;KACT,CAAC,CAAC;IACH,MAAM,QAAQ,GAAG,SAAS,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,EAAE,CAAC,CAAC,CAAC;IAC9C,MAAM,mBAAmB,GAAG,gBAAgB,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,EAAE,wBAAwB,EAAE;QACvF,OAAO,EAAE,IAAI;QACb,QAAQ;KACT,CAAC,CAAC;IACH,MAAM,cAAc,GAAG,gBAAgB,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,EAAE,2BAA2B,EAAE;QACrF,QAAQ;KACT,CAAC,CAAC;IACH,MAAM,WAAW,GAAG,gBAAgB,CAAC,GAAG,CAAC,GAAG,EAAE,GAAG,EAAE,CAAC,CAAC,EAAE,mBAAmB,EAAE;QAC1E,OAAO,EAAE,IAAI;QACb,QAAQ;KACT,CAAC,CAAC;IAEH,IAAI,WAAW,IAAI,CAAC,EAAE,CAAC;QACrB,MAAM,IAAI,QAAQ,CAChB,sBAAsB,EACtB,mBAAmB,WAAW,gCAAgC,CAC/D,CAAC;IACJ,CAAC;IACD,IAAI,CAAC,CAAC,cAAc,GAAG,CAAC,CAAC,EAAE,CAAC;QAC1B,MAAM,IAAI,QAAQ,CAChB,yBAAyB,EACzB,6CAA6C,cAAc,gCAAgC,CAC5F,CAAC;IACJ,CAAC;IAED,MAAM,mBAAmB,GAAG,kBAAkB,GAAG,WAAW,GAAG,mBAAmB,CAAC;IACnF,IAAI,GAAG,CAAC,MAAM,GAAG,mBAAmB,EAAE,CAAC;QACrC,MAAM,IAAI,QAAQ,CAChB,gBAAgB;QAChB;;;;;;;UAOE;QACF,iBAAiB,WAAW,2BAA2B,mBAAmB,gBAAgB;YACxF,CAAC,QAAQ,GAAG,mBAAmB;gBAC7B,CAAC,CAAC,wBAAwB,QAAQ,SAAS;gBAC3C,CAAC,CAAC,YAAY,GAAG,CAAC,MAAM,yCAAyC,CAAC,CACvE,CAAC;IACJ,CAAC;IACD,IAAI,WAAW,KAAK,mBAAmB,EAAE,CAAC;QACxC,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,uBAAuB;YAC7B,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,qBAAqB,WAAW,eAAe,WAAW,mBAAmB;gBAC7E,GAAG,mBAAmB,yDAAyD;SAClF,CAAC,CAAC;IACL,CAAC;IAED,+EAA+E;IAC/E,MAAM,IAAI,GAAG,kBAAkB,CAAC;IAChC,MAAM,SAAS,GAAG,CAAC,WAAmB,EAAE,KAAa,EAAE,CAAS,EAAU,EAAE,CAC1E,GAAG,CAAC,GAAG,EAAE,IAAI,GAAG,WAAW,GAAG,WAAW,GAAG,CAAC,GAAG,KAAK,EAAE,KAAK,CAAC,CAAC;IAEhE,kFAAkF;IAClF,oEAAoE;IACpE,MAAM,aAAa,GAAG,uBAAuB,CAAC,IAAI,CAAC,QAAQ,CAAC,CAAC;IAC7D,MAAM,UAAU,GACd,aAAa,KAAK,IAAI,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,aAAa,CAAC,CAAC,CAAC,KAAK,GAAG,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,OAAO,CAAC;IAE/E,MAAM,OAAO,GAAgB,EAAE,CAAC;IAChC,IAAI,kBAAkB,GAAG,CAAC,CAAC;IAC3B,MAAM,cAAc,GAAG,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACrC,MAAM,UAAU,GAAG,IAAI,GAAG,EAAoB,CAAC;IAC/C,MAAM,WAAW,GAAa,EAAE,CAAC;IAEjC,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,WAAW,EAAE,CAAC,EAAE,EAAE,CAAC;QACrC,MAAM,KAAK,GAAG,SAAS,CAAC,SAAS,CAAC,CAAC,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC;QAC7C,MAAM,UAAU,GAAG,SAAS,CAAC,SAAS,CAAC,EAAE,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC;QACnD,MAAM,iBAAiB,GAAG,SAAS,CAAC,SAAS,CAAC,EAAE,EAAE,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC;QACzD,MAAM,WAAW,GAAG,gBAAgB,CAAC,SAAS,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,4BAA4B,CAAC,GAAG,EAAE;YAC3F,QAAQ;SACT,CAAC,CAAC;QACH,MAAM,WAAW,GAAG,gBAAgB,CAAC,SAAS,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,4BAA4B,CAAC,GAAG,EAAE;YAC3F,QAAQ;SACT,CAAC,CAAC;QACH,MAAM,UAAU,GAAG,gBAAgB,CAAC,SAAS,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,2BAA2B,CAAC,GAAG,EAAE;YACzF,OAAO,EAAE,IAAI;YACb,QAAQ;SACT,CAAC,CAAC;QACH,MAAM,UAAU,GAAG,gBAAgB,CAAC,SAAS,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EAAE,2BAA2B,CAAC,GAAG,EAAE;YACzF,OAAO,EAAE,IAAI;YACb,QAAQ;SACT,CAAC,CAAC;QACH,MAAM,YAAY,GAAG,SAAS,CAAC,SAAS,CAAC,GAAG,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC;QACtD,MAAM,gBAAgB,GAAG,gBAAgB,CACvC,SAAS,CAAC,GAAG,EAAE,CAAC,EAAE,CAAC,CAAC,EACpB,8BAA8B,CAAC,GAAG,EAClC,EAAE,OAAO,EAAE,IAAI,EAAE,QAAQ,EAAE,CAC5B,CAAC;QACF,MAAM,WAAW,GAAG,SAAS,CAAC,SAAS,CAAC,GAAG,EAAE,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC;QAErD,IAAI,gBAAgB,GAAG,CAAC,EAAE,CAAC;YACzB,MAAM,IAAI,QAAQ,CAChB,kBAAkB,EAClB,UAAU,CAAC,MAAM,KAAK,eAAe,gBAAgB,sBAAsB,CAC5E,CAAC;QACJ,CAAC;QAED,MAAM,aAAa,GAAG,KAAK,KAAK,iBAAiB,IAAI,KAAK,KAAK,qBAAqB,CAAC;QAErF,OAAO,CAAC,IAAI,CAAC;YACX,KAAK,EAAE,CAAC;YACR,KAAK;YACL,UAAU;YACV,iBAAiB;YACjB,WAAW;YACX,WAAW;YACX,UAAU;YACV,UAAU;YACV,YAAY;YACZ,gBAAgB;YAChB,QAAQ,EAAE,WAAW;YACrB,aAAa;YACb,YAAY,EAAE,gBAAgB,GAAG,cAAc;YAC/C,kBAAkB;SACnB,CAAC,CAAC;QACH,kBAAkB,IAAI,gBAAgB,GAAG,cAAc,CAAC;QAExD,IAAI,CAAC,aAAa,EAAE,CAAC;YACnB;;;;;;;;;;;;;;cAcE;YACF;;;;;;;;;;cAUE;YACF,MAAM,OAAO,GAAG,CAAC,GAAG,KAAK,CAAC,CAAC,MAAM,CAAC,kBAAkB,CAAC,CAAC;YACtD,MAAM,MAAM,GAAG,CAAC,GAAG,iBAAiB,CAAC,CAAC,MAAM,CAAC,kBAAkB,CAAC,CAAC;YACjE,MAAM,OAAO,GAAG,CAAC,GAAG,OAAO,EAAE,GAAG,MAAM,CAAC,CAAC;YACxC,IAAI,OAAO,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;gBACvB,MAAM,KAAK,GAAG,CAAC,GAAG,IAAI,GAAG,CAAC,OAAO,CAAC,CAAC;qBAChC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,MAAO,CAAC,CAAC,WAAW,CAAC,CAAC,CAAY,CAAC,QAAQ,CAAC,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,EAAE,CAAC;qBAC9E,IAAI,CAAC,IAAI,CAAC,CAAC;gBACd,MAAM,MAAM,GAAG,OAAO,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,CAAC;gBAC/C,MAAM,IAAI,GAAG,OAAO,CAAC,MAAM,GAAG,CAAC,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC;gBACrD,MAAM,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,wBAAwB,CAAC,CAAC,CAAC,OAAO,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC,CAAC,gBAAgB,CAAC,CAAC,CAAC,eAAe,CAAC;gBACxG,kFAAkF;gBAClF,0EAA0E;gBAC1E,MAAM,KAAK,GAAG,IAAI;oBAChB,CAAC,CAAC,2EAA2E;oBAC7E,CAAC,CAAC,OAAO,CAAC,MAAM,GAAG,CAAC;wBAClB,CAAC,CAAC,0CAA0C;wBAC5C,CAAC,CAAC,gDAAgD,CAAC;gBACvD,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,oBAAoB;oBAC1B,QAAQ,EAAE,SAAS;oBACnB,OAAO,EACL,UAAU,CAAC,MAAM,KAAK,IAAI,OAAO,CAAC,MAAM,qBAAqB,MAAM,GAAG;wBACtE,IAAI,KAAK,MAAM,KAAK,kCAAkC;oBACxD,IAAI,EACF,CAAC,OAAO,CAAC,MAAM,GAAG,CAAC;wBACjB,CAAC,CAAC,qDAAqD,CAAC,yBAAyB;4BAC/E,kCAAkC;wBACpC,CAAC,CAAC,iDAAiD,KAAK,sBAAsB,CAAC;wBACjF,2DAA2D;iBAC9D,CAAC,CAAC;YACL,CAAC;YAED,IAAI,KAAK,KAAK,EAAE,EAAE,CAAC;gBACjB,qFAAqF;gBACrF,sFAAsF;gBACtF,2DAA2D;gBAC3D,WAAW,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC;YACtB,CAAC;iBAAM,CAAC;gBACN,0EAA0E;gBAC1E,sEAAsE;gBACtE,MAAM,IAAI,GAAG,UAAU,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC;gBACnC,IAAI,IAAI;oBAAE,IAAI,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC;;oBAClB,UAAU,CAAC,GAAG,CAAC,KAAK,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC;YAClC,CAAC;YAED,IAAI,gBAAgB,KAAK,CAAC,EAAE,CAAC;gBAC3B,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,YAAY;oBAClB,QAAQ,EAAE,SAAS;oBACnB,OAAO,EAAE,UAAU,CAAC,MAAM,KAAK,mDAAmD;oBAClF,IAAI,EAAE,qEAAqE;iBAC5E,CAAC,CAAC;YACL,CAAC;YAED;;;;;;;;;;;;cAYE;YACF,MAAM,IAAI,GAAG,WAAW,GAAG,WAAW,CAAC;YACvC,MAAM,WAAW,GAAG,IAAI,KAAK,CAAC,IAAI,IAAI,GAAG,CAAC,UAAU,GAAG,UAAU,CAAC,KAAK,CAAC,CAAC;YACzE,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC,IAAI,WAAW,EAAE,CAAC;gBAC1C,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,yBAAyB;oBAC/B,QAAQ,EAAE,SAAS;oBACnB,OAAO,EACL,UAAU,CAAC,MAAM,KAAK,qCAAqC,WAAW,MAAM;wBAC5E,GAAG,WAAW,uBAAuB,WAAW,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,OAAO,MAAM;wBAC1E,4CAA4C;oBAC9C,IAAI,EAAE,qFAAqF;iBAC5F,CAAC,CAAC;YACL,CAAC;iBAAM,IAAI,UAAU,KAAK,UAAU,EAAE,CAAC;gBACrC,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,0BAA0B;oBAChC,QAAQ,EAAE,SAAS;oBACnB,OAAO,EACL,UAAU,CAAC,MAAM,KAAK,kDAAkD;wBACxE,IAAI,UAAU,oCAAoC;oBACpD,IAAI,EAAE,qFAAqF;iBAC5F,CAAC,CAAC;YACL,CAAC;iBAAM,IAAI,WAAW,KAAK,WAAW,EAAE,CAAC;gBACvC,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,2BAA2B;oBACjC,QAAQ,EAAE,SAAS;oBACnB,OAAO,EACL,UAAU,CAAC,MAAM,KAAK,oDAAoD;wBAC1E,IAAI,WAAW,gDAAgD;iBAClE,CAAC,CAAC;YACL,CAAC;iBAAM,IAAI,CAAC,WAAW,GAAG,WAAW,CAAC,GAAG,CAAC,UAAU,GAAG,UAAU,CAAC,GAAG,CAAC,EAAE,CAAC;gBACvE;;;;;;;;;;kBAUE;gBACF,MAAM,QAAQ,GACZ,WAAW,GAAG,WAAW;oBACvB,CAAC,CAAC,oBAAoB,WAAW,2BAA2B,WAAW,EAAE;oBACzE,CAAC,CAAC,mBAAmB,UAAU,0BAA0B,UAAU,EAAE,CAAC;gBAC1E,WAAW,CAAC,IAAI,CAAC;oBACf,IAAI,EAAE,yBAAyB;oBAC/B,QAAQ,EAAE,SAAS;oBACnB,OAAO,EAAE,UAAU,CAAC,MAAM,KAAK,eAAe,QAAQ,+BAA+B;oBACrF,IAAI,EAAE,+EAA+E;iBACtF,CAAC,CAAC;YACL,CAAC;QACH,CAAC;IACH,CAAC;IAED;;;;;;;;;;;;;;;;;;MAkBE;IACF,KAAK,MAAM,KAAK,IAAI,WAAW,EAAE,CAAC;QAChC,MAAM,KAAK,GAAG,UAAU,CAAC,GAAG,CAAC,UAAU,KAAK,EAAE,CAAC,CAAC;QAChD,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,aAAa;YACnB,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,KAAK,KAAK,SAAS;gBACjB,CAAC,CAAC,UAAU,KAAK,4CAA4C,KAAK,IAAI;gBACtE,CAAC,CAAC,UAAU,KAAK,+CAA+C,KAAK,YAAY;oBAC/E,GAAG,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,QAAQ,CAAC,CAAC,CAAC,SAAS,IAAI,MAAM,CAAC,KAAK,CAAC,GAAG,CAAC,MAAM,CAAC,CAAC,WAAW;oBACpF,GAAG,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,OAAO,mCAAmC;oBAC9E,uCAAuC;SAC9C,CAAC,CAAC;IACL,CAAC;IAED,KAAK,MAAM,CAAC,KAAK,EAAE,OAAO,CAAC,IAAI,UAAU,EAAE,CAAC;QAC1C,IAAI,OAAO,CAAC,MAAM,GAAG,CAAC;YAAE,SAAS;QACjC,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,iBAAiB;YACvB,QAAQ,EAAE,SAAS;YACnB,OAAO,EAAE,GAAG,OAAO,CAAC,MAAM,6BAA6B,KAAK,gBAAgB,OAAO,CAAC,IAAI,CAAC,IAAI,CAAC,IAAI;YAClG,IAAI,EAAE,iFAAiF;SACxF,CAAC,CAAC;IACL,CAAC;IAED,MAAM,WAAW,GAAG,kBAAkB,CAAC;IACvC,IAAI,WAAW,IAAI,CAAC,EAAE,CAAC;QACrB,MAAM,IAAI,QAAQ,CAChB,YAAY,EACZ,2FAA2F,CAC5F,CAAC;IACJ,CAAC;IAED,IAAI,QAAQ,CAAC,KAAK,EAAE,CAAC;QACnB,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,eAAe;YACrB,QAAQ,EAAE,SAAS;YACnB,OAAO,EAAE,uFAAuF;YAChG,IAAI,EAAE,0EAA0E;SACjF,CAAC,CAAC;IACL,CAAC;IAED,MAAM,SAAS,GAAG,QAAQ,GAAG,mBAAmB,CAAC;IACjD,IAAI,SAAS,GAAG,CAAC,EAAE,CAAC;QAClB,MAAM,IAAI,QAAQ,CAAC,gBAAgB,EAAE,sCAAsC,CAAC,CAAC;IAC/E,CAAC;IACD,MAAM,WAAW,GAAG,IAAI,CAAC,KAAK,CAAC,SAAS,GAAG,WAAW,CAAC,CAAC;IACxD,MAAM,aAAa,GAAG,SAAS,GAAG,WAAW,GAAG,WAAW,CAAC;IAE5D,IAAI,WAAW,KAAK,CAAC,EAAE,CAAC;QACtB,MAAM,IAAI,QAAQ,CAChB,iBAAiB,EACjB,yDAAyD,EACzD,qEAAqE,CACtE,CAAC;IACJ,CAAC;IAED,IAAI,mBAAmB,KAAK,CAAC,CAAC,EAAE,CAAC;QAC/B,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,sBAAsB;YAC5B,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,yFAAyF;gBACzF,+CAA+C,OAAO,CAAC,WAAW,EAAE,QAAQ,CAAC,8BAA8B;SAC9G,CAAC,CAAC;IACL,CAAC;SAAM,IAAI,mBAAmB,KAAK,WAAW,EAAE,CAAC;QAC/C,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,uBAAuB;YAC7B,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,uBAAuB,mBAAmB,sCAAsC;gBAChF,GAAG,WAAW,oBAAoB,OAAO,CAAC,WAAW,EAAE,QAAQ,CAAC,SAAS,WAAW,KAAK,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,KAAK,WAAW;YACtH,IAAI,EACF,mBAAmB,GAAG,WAAW;gBAC/B,CAAC,CAAC,mFAAmF;gBACrF,CAAC,CAAC,4CAA4C;SACnD,CAAC,CAAC;IACL,CAAC;IAED,IAAI,aAAa,GAAG,CAAC,EAAE,CAAC;QACtB,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,gBAAgB;YACtB,QAAQ,EAAE,SAAS;YACnB,OAAO,EAAE,GAAG,OAAO,CAAC,aAAa,EAAE,MAAM,CAAC,wCAAwC,aAAa,KAAK,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,MAAM,WAAW;SAClI,CAAC,CAAC;IACL,CAAC;IAED,MAAM,SAAS,GAAG,UAAU,KAAK,IAAI,CAAC;IACtC,IAAI,UAAU,KAAK,OAAO,EAAE,CAAC;QAC3B,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,eAAe;YACrB,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,4BAA4B,KAAK,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,OAAO,oCAAoC;gBACzF,yBAAyB;YAC3B,IAAI,EAAE,yFAAyF;SAChG,CAAC,CAAC;IACL,CAAC;IAED,MAAM,WAAW,GAAG,OAAO,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,aAAa,CAAC,CAAC;IAC5D,IAAI,WAAW,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QAC7B,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,oBAAoB;YAC1B,QAAQ,EAAE,SAAS;YACnB,OAAO,EAAE,sEAAsE;SAChF,CAAC,CAAC;IACL,CAAC;IAED,uFAAuF;IACvF,wFAAwF;IACxF,sFAAsF;IACtF,wEAAwE;IACxE,MAAM,KAAK,GAAG,IAAI,GAAG,CAAC,WAAW,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,gBAAgB,GAAG,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,YAAY,CAAC,CAAC,CAAC;IACpG,IAAI,KAAK,CAAC,IAAI,GAAG,CAAC,EAAE,CAAC;QACnB,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,sBAAsB;YAC5B,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,gBAAgB,KAAK,CAAC,IAAI,4BAA4B;gBACtD,IAAI,MAAM,CAAC,WAAW,CAAC,CAAC,GAAG,KAAK,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC,IAAI;YACrF,IAAI,EAAE,mEAAmE;SAC1E,CAAC,CAAC;IACL,CAAC;IAED,OAAO;QACL,MAAM,EAAE;YACN,OAAO;YACP,SAAS;YACT,WAAW;YACX,YAAY;YACZ,YAAY;YACZ,aAAa,EAAE,oBAAoB,CAAC,YAAY,EAAE,YAAY,CAAC;YAC/D,WAAW,EAAE,mBAAmB;YAChC,mBAAmB,EAAE,WAAW;YAChC,QAAQ;YACR,SAAS;YACT,KAAK;YACL,UAAU;YACV,mBAAmB;YACnB,cAAc;YACd,WAAW;YACX,OAAO;YACP,cAAc;YACd,WAAW;SACZ;QACD,WAAW;QACX,aAAa;QACb,WAAW;KACZ,CAAC;AACJ,CAAC;AAED;;;;;;;;;;GAUG;AACH,MAAM,UAAU,eAAe,CAAC,IAAiB;IAC/C,IAAI,CAAC,IAAI;QAAE,OAAO,IAAI,CAAC;IACvB,OAAO,IAAI,CAAC,WAAW,EAAE,CAAC,KAAK,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC;AACzC,CAAC;AAED,oDAAoD;AACpD,MAAM,UAAU,cAAc,CAAC,MAAiB;IAC9C,MAAM,IAAI,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC;IAC1C,IAAI,CAAC,MAAM,CAAC,SAAS;QAAE,OAAO,IAAI,CAAC;IACnC,OAAO,GAAG,IAAI,MAAM,MAAM,CAAC,UAAU,KAAK,OAAO,CAAC,CAAC,CAAC,eAAe,CAAC,CAAC,CAAC,YAAY,GAAG,CAAC;AACxF,CAAC;AAED,qEAAqE;AACrE,MAAM,UAAU,UAAU,CAAC,EAAU;IACnC,IAAI,MAAM,CAAC,SAAS,CAAC,EAAE,CAAC;QAAE,OAAO,MAAM,CAAC,EAAE,CAAC,CAAC;IAC5C,MAAM,OAAO,GAAG,MAAM,CAAC,EAAE,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,CAAC;IACtC,qFAAqF;IACrF,sFAAsF;IACtF,sFAAsF;IACtF,8EAA8E;IAC9E,IAAI,OAAO,KAAK,CAAC;QAAE,OAAO,EAAE,CAAC,aAAa,CAAC,CAAC,CAAC,CAAC;IAC9C,OAAO,MAAM,CAAC,OAAO,CAAC,CAAC;AACzB,CAAC;AAED;;;;;;;;;;;;;;GAcG;AACH,MAAM,UAAU,WAAW,CAAC,KAAwB;IAClD,MAAM,OAAO,GAAG,KAAK,CAAC,GAAG,CAAC,UAAU,CAAC,CAAC;IACtC,MAAM,QAAQ,GAAG,IAAI,GAAG,CAAC,KAAK,CAAC,CAAC,IAAI,CAAC;IACrC,OAAO,IAAI,GAAG,CAAC,OAAO,CAAC,CAAC,IAAI,KAAK,QAAQ,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,EAAE,CAAC,MAAM,CAAC,EAAE,CAAC,CAAC,CAAC;AACtF,CAAC","sourcesContent":["/**\n * EDF / EDF+ header parsing.\n *\n * Layout (all fields are ASCII, left-justified, space-padded):\n *\n *   fixed header, 256 bytes\n *     0    8   version ('0', or 255 + 'BIOSEMI' for BDF)\n *     8   80   patient identification\n *    88   80   recording identification\n *   168    8   start date  dd.mm.yy\n *   176    8   start time  hh.mm.ss\n *   184    8   number of bytes in the header record\n *   192   44   reserved  ('EDF+C' / 'EDF+D' live here)\n *   236    8   number of data records (-1 if unknown)\n *   244    8   duration of a data record, in seconds (may be fractional)\n *   252    4   number of signals (ns)\n *\n *   signal header, ns * 256 bytes, stored FIELD-major rather than signal-major:\n *   all ns labels, then all ns transducer types, and so on.\n *     ns * 16   label\n *     ns * 80   transducer type\n *     ns *  8   physical dimension\n *     ns *  8   physical minimum\n *     ns *  8   physical maximum\n *     ns *  8   digital minimum\n *     ns *  8   digital maximum\n *     ns * 80   prefiltering\n *     ns *  8   number of samples in each data record\n *     ns * 32   reserved\n */\n\nimport { EdfError } from './errors.js';\nimport type { Diagnostic } from './errors.js';\nimport { counted, listed } from '../format/list.js';\nimport { decodeLatin1 } from './bytes.js';\n\n/** Label the EDF+ spec reserves for the annotations channel. */\nexport const ANNOTATIONS_LABEL = 'EDF Annotations';\n/** BDF+ uses its own spelling for the same channel. */\nexport const BDF_ANNOTATIONS_LABEL = 'BDF Annotations';\n\nexport const FIXED_HEADER_BYTES = 256;\nexport const SIGNAL_HEADER_BYTES = 256;\n\nexport interface EdfSignal {\n  /** Position in the file, 0-based. Stable even when labels collide. */\n  index: number;\n  label: string;\n  transducer: string;\n  physicalDimension: string;\n  physicalMin: number;\n  physicalMax: number;\n  digitalMin: number;\n  digitalMax: number;\n  prefiltering: string;\n  samplesPerRecord: number;\n  reserved: string;\n  /** True for the EDF+ 'EDF Annotations' channel, which carries text, not signal. */\n  isAnnotations: boolean;\n  /** samplesPerRecord / recordDuration, in Hz. */\n  samplingRate: number;\n  /** Byte offset of this signal's samples within one data record. */\n  byteOffsetInRecord: number;\n}\n\nexport interface EdfHeader {\n  version: string;\n  patientId: string;\n  recordingId: string;\n  /** Raw 'dd.mm.yy' as written in the file. */\n  startDateRaw: string;\n  /** Raw 'hh.mm.ss' as written in the file. */\n  startTimeRaw: string;\n  /** Resolved start instant, or null when the file's date/time fields are unusable. */\n  startDateTime: Date | null;\n  /**\n   * Header size in bytes, computed from the signal count rather than read from the field.\n   *\n   * Every data record offset is derived from this, so it has to be the one the layout\n   * actually uses: 256 for the fixed header plus 256 per signal. A writer that fills the\n   * field in carelessly is common enough to have its own warning, HEADER_BYTES_MISMATCH,\n   * and trusting the field over the arithmetic would put every sample at the wrong offset.\n   */\n  headerBytes: number;\n  /**\n   * What the header's own length field says, which need not be the above.\n   *\n   * Exposed for the same reason `declaredRecordCount` is: the two disagreeing is a fact\n   * about the file, and a caller checking how a recording was written should be able to see\n   * what it claimed rather than only what was believed.\n   */\n  declaredHeaderBytes: number;\n  reserved: string;\n  isEdfPlus: boolean;\n  /** True for BioSemi BDF/BDF+ files, whose samples are 3 bytes rather than 2. */\n  isBdf: boolean;\n  /** 'EDF+C' continuous, 'EDF+D' discontinuous, or null for plain EDF. */\n  continuity: 'EDF+C' | 'EDF+D' | null;\n  /** As declared in the header. -1 means \"unknown\", which the spec permits. */\n  declaredRecordCount: number;\n  recordDuration: number;\n  signalCount: number;\n  signals: EdfSignal[];\n  bytesPerSample: number;\n  recordBytes: number;\n}\n\n/** Everything derived by combining the header with the file's real size. */\nexport interface EdfHeaderInfo {\n  header: EdfHeader;\n  /** Record count implied by the actual file size — the one we trust for reading. */\n  recordCount: number;\n  /** Bytes after the last complete data record. */\n  trailingBytes: number;\n  diagnostics: Diagnostic[];\n}\n\n/**\n * A byte the terminal treats as an instruction rather than as text.\n *\n * C0 and C1, plus DEL. Tab is included deliberately: it is harmless to a terminal but it\n * makes a CSV column name that cannot be typed or matched reliably, which is the other half\n * of what this warning is for.\n */\nfunction isControlCharacter(character: string): boolean {\n  const code = character.codePointAt(0) as number;\n  return code <= 0x1f || (code >= 0x7f && code <= 0x9f);\n}\n\nconst dec = (buf: Uint8Array, start: number, len: number): string =>\n  decodeLatin1(buf, start, start + len);\n\n/** EDF fields are space-padded; trailing NULs also occur in files written by sloppy tools. */\nconst trimField = (s: string): string => s.replace(/[\\0\\s]+$/u, '').replace(/^\\s+/u, '');\n\n/**\n * How many signals the fixed header says there are, read exactly as `parseHeader` will.\n *\n * `EdfFile.open` needs this before it can know how much header to read, and it used to work\n * it out with its own `Number(...)` — which was NUL-tolerant but not comma-tolerant, unlike\n * every other numeric field here. A header written with a comma decimal separator, which\n * COMMA_DECIMAL exists to accept and which the documentation lists this field among, was\n * therefore never given its signal headers at all, and the file died on a message that\n * contradicted itself: \"needs a 768-byte header, but the file is only 848 bytes\".\n *\n * Sharing the parse is what keeps the two from disagreeing again about which files are\n * readable. Null means \"not a usable count\", and the caller reads no further header — the\n * real error then comes from `parseHeader`, which is the one place that decides.\n */\nexport function peekSignalCount(fixed: Uint8Array): number | null {\n  const count = Number(normaliseNumberField(dec(fixed, 252, 4)).text);\n  return Number.isInteger(count) && count > 0 ? count : null;\n}\n\n/** A numeric header field, trimmed and with a comma decimal separator turned into a dot. */\nfunction normaliseNumberField(raw: string): { text: string; sawComma: boolean } {\n  const text = trimField(raw);\n  // Some writers emit a comma decimal separator despite the spec requiring '.'.\n  if (text.includes(',') && !text.includes('.')) {\n    return { text: text.replace(',', '.'), sawComma: true };\n  }\n  return { text, sawComma: false };\n}\n\nfunction parseNumberField(\n  raw: string,\n  field: string,\n  { integer = false, sawComma }: { integer?: boolean; sawComma?: { value: boolean } } = {},\n): number {\n  const normalised = normaliseNumberField(raw);\n  const text = normalised.text;\n  if (normalised.sawComma && sawComma) sawComma.value = true;\n  if (text === '') {\n    throw new EdfError('BAD_HEADER_FIELD', `Header field \"${field}\" is empty.`);\n  }\n  const n = Number(text);\n  if (!Number.isFinite(n)) {\n    throw new EdfError(\n      'BAD_HEADER_FIELD',\n      `Header field \"${field}\" is not a number (found ${JSON.stringify(text)}).`,\n      'The file may be truncated, byte-shifted, or not an EDF file at all.',\n    );\n  }\n  if (integer && !Number.isInteger(n)) {\n    throw new EdfError(\n      'BAD_HEADER_FIELD',\n      `Header field \"${field}\" must be a whole number (found ${JSON.stringify(text)}).`,\n    );\n  }\n  return n;\n}\n\n/**\n * EDF stores a two-digit year. The spec pins the century: 85-99 mean 1985-1999\n * and 00-84 mean 2000-2084. Files outside 1985-2084 cannot express their date.\n */\nfunction resolveStartDateTime(dateRaw: string, timeRaw: string): Date | null {\n  const d = /^(\\d{2})[.\\-/](\\d{2})[.\\-/](\\d{2})$/u.exec(trimField(dateRaw));\n  const t = /^(\\d{2})[.:\\-](\\d{2})[.:\\-](\\d{2})$/u.exec(trimField(timeRaw));\n  if (!d || !t) return null;\n\n  const dd = Number(d[1]);\n  const mm = Number(d[2]);\n  const yy = Number(d[3]);\n  const hh = Number(t[1]);\n  const mi = Number(t[2]);\n  const ss = Number(t[3]);\n\n  if (mm < 1 || mm > 12 || dd < 1 || dd > 31 || hh > 23 || mi > 59 || ss > 60) return null;\n\n  const year = yy >= 85 ? 1900 + yy : 2000 + yy;\n  const date = new Date(Date.UTC(year, mm - 1, dd, hh, mi, Math.min(ss, 59)));\n  // Reject dates that rolled over, e.g. 31.02.\n  if (date.getUTCMonth() !== mm - 1 || date.getUTCDate() !== dd) return null;\n  return date;\n}\n\n/**\n * Parse the fixed 256-byte header plus the per-signal header block.\n *\n * @param buf   At least FIXED_HEADER_BYTES + ns * SIGNAL_HEADER_BYTES bytes.\n * @param fileSize Total size of the file on disk, used to derive the real record count.\n */\nexport function parseHeader(buf: Uint8Array, fileSize: number): EdfHeaderInfo {\n  const diagnostics: Diagnostic[] = [];\n  const sawComma = { value: false };\n\n  if (buf.length < FIXED_HEADER_BYTES) {\n    throw new EdfError(\n      'FILE_TOO_SMALL',\n      `File is ${fileSize} bytes; an EDF header alone needs at least ${FIXED_HEADER_BYTES}.`,\n    );\n  }\n\n  // BDF (BioSemi) marks itself with byte 255 followed by 'BIOSEMI', and stores\n  // 3-byte samples instead of 2. Everything else about the layout is identical.\n  const isBdf = buf[0] === 0xff && dec(buf, 1, 7) === 'BIOSEMI';\n  const version = isBdf ? 'BIOSEMI' : trimField(dec(buf, 0, 8));\n\n  const patientId = trimField(dec(buf, 8, 80));\n  const recordingId = trimField(dec(buf, 88, 80));\n  const startDateRaw = trimField(dec(buf, 168, 8));\n  const startTimeRaw = trimField(dec(buf, 176, 8));\n  const headerBytes = parseNumberField(dec(buf, 184, 8), 'number of header bytes', {\n    integer: true,\n    sawComma,\n  });\n  const reserved = trimField(dec(buf, 192, 44));\n  const declaredRecordCount = parseNumberField(dec(buf, 236, 8), 'number of data records', {\n    integer: true,\n    sawComma,\n  });\n  const recordDuration = parseNumberField(dec(buf, 244, 8), 'duration of a data record', {\n    sawComma,\n  });\n  const signalCount = parseNumberField(dec(buf, 252, 4), 'number of signals', {\n    integer: true,\n    sawComma,\n  });\n\n  if (signalCount <= 0) {\n    throw new EdfError(\n      'INVALID_SIGNAL_COUNT',\n      `Header declares ${signalCount} signals; expected at least 1.`,\n    );\n  }\n  if (!(recordDuration > 0)) {\n    throw new EdfError(\n      'INVALID_RECORD_DURATION',\n      `Header declares a data record duration of ${recordDuration}s; expected a positive number.`,\n    );\n  }\n\n  const expectedHeaderBytes = FIXED_HEADER_BYTES + signalCount * SIGNAL_HEADER_BYTES;\n  if (buf.length < expectedHeaderBytes) {\n    throw new EdfError(\n      'FILE_TOO_SMALL',\n      /*\n        Which of the two is actually short.\n\n        The file size was quoted either way, so a caller that had read too little — the\n        signal count parsed one way here and another way there — produced arithmetic that\n        refuted itself: \"needs a 768-byte header, but the file is only 848 bytes\". A reader\n        following that looks for a truncation that is not there.\n      */\n      `File declares ${signalCount} signals, which needs a ${expectedHeaderBytes}-byte header, ` +\n        (fileSize < expectedHeaderBytes\n          ? `but the file is only ${fileSize} bytes.`\n          : `but only ${buf.length} bytes of it were handed to the parser.`),\n    );\n  }\n  if (headerBytes !== expectedHeaderBytes) {\n    diagnostics.push({\n      code: 'HEADER_BYTES_MISMATCH',\n      severity: 'warning',\n      message:\n        `Header says it is ${headerBytes} bytes, but ${signalCount} signals require ` +\n        `${expectedHeaderBytes} bytes. Using the value computed from the signal count.`,\n    });\n  }\n\n  // Signal headers are field-major: all labels, then all transducers, and so on.\n  const base = FIXED_HEADER_BYTES;\n  const readField = (offsetUnits: number, width: number, i: number): string =>\n    dec(buf, base + offsetUnits * signalCount + i * width, width);\n\n  // EDF+ writes 'EDF+C'/'EDF+D' here; BDF+ writes 'BDF+C'/'BDF+D'. The two mean the\n  // same thing, so both are normalised to a single continuity marker.\n  const continuityTag = /^(?:EDF|BDF)\\+([CD])/u.exec(reserved);\n  const continuity: 'EDF+C' | 'EDF+D' | null =\n    continuityTag === null ? null : continuityTag[1] === 'D' ? 'EDF+D' : 'EDF+C';\n\n  const signals: EdfSignal[] = [];\n  let byteOffsetInRecord = 0;\n  const bytesPerSample = isBdf ? 3 : 2;\n  const seenLabels = new Map<string, number[]>();\n  const emptyLabels: number[] = [];\n\n  for (let i = 0; i < signalCount; i++) {\n    const label = trimField(readField(0, 16, i));\n    const transducer = trimField(readField(16, 80, i));\n    const physicalDimension = trimField(readField(96, 8, i));\n    const physicalMin = parseNumberField(readField(104, 8, i), `physical minimum (signal ${i})`, {\n      sawComma,\n    });\n    const physicalMax = parseNumberField(readField(112, 8, i), `physical maximum (signal ${i})`, {\n      sawComma,\n    });\n    const digitalMin = parseNumberField(readField(120, 8, i), `digital minimum (signal ${i})`, {\n      integer: true,\n      sawComma,\n    });\n    const digitalMax = parseNumberField(readField(128, 8, i), `digital maximum (signal ${i})`, {\n      integer: true,\n      sawComma,\n    });\n    const prefiltering = trimField(readField(136, 80, i));\n    const samplesPerRecord = parseNumberField(\n      readField(216, 8, i),\n      `samples per record (signal ${i})`,\n      { integer: true, sawComma },\n    );\n    const sigReserved = trimField(readField(224, 32, i));\n\n    if (samplesPerRecord < 0) {\n      throw new EdfError(\n        'BAD_HEADER_FIELD',\n        `Signal ${i} (\"${label}\") declares ${samplesPerRecord} samples per record.`,\n      );\n    }\n\n    const isAnnotations = label === ANNOTATIONS_LABEL || label === BDF_ANNOTATIONS_LABEL;\n\n    signals.push({\n      index: i,\n      label,\n      transducer,\n      physicalDimension,\n      physicalMin,\n      physicalMax,\n      digitalMin,\n      digitalMax,\n      prefiltering,\n      samplesPerRecord,\n      reserved: sigReserved,\n      isAnnotations,\n      samplingRate: samplesPerRecord / recordDuration,\n      byteOffsetInRecord,\n    });\n    byteOffsetInRecord += samplesPerRecord * bytesPerSample;\n\n    if (!isAnnotations) {\n      /*\n        A label is free text out of the file, and it becomes a column name in signals.csv.\n\n        `--info` has escaped control bytes since it was written, because an ANSI escape in a\n        header can drive the reader's terminal — `\\x1b[2J` clears the screen. The CSV had no\n        such protection and needed none for correctness: quoting makes any byte safe for a\n        parser, and this still passes the label through exactly as the file gives it, because\n        losing what the header says is not an improvement.\n\n        What was missing is the sentence saying so. A recording whose channel is labelled\n        `\\x1b[2Jgone` converted with no warning at all, and `cat signals.csv` then cleared\n        the terminal — while a script referencing that column by name carried an invisible\n        control character in it. NONPRINTABLE_LABEL has been declared and documented as\n        reserved since 0.1; this is it doing its job.\n      */\n      /*\n        Which of the two fields carries them, because the consequences are not the same.\n\n        The message said \"label or unit\", and then said the bytes \"will appear in the CSV\n        column name\" and that \"the name cannot be typed\" — both of which are about the label.\n        A channel labelled plainly `ECG` in a unit of `u\\x07V` got all of it: its column is\n        `ECG`, `--channels ECG` selects it and exits 0, and the byte is in channels.csv's\n        `unit` cell, which the warning never mentioned. Three sentences, none of them true of\n        the file that raised it, on a warning whose whole purpose is to say where an invisible\n        byte went.\n      */\n      const inLabel = [...label].filter(isControlCharacter);\n      const inUnit = [...physicalDimension].filter(isControlCharacter);\n      const control = [...inLabel, ...inUnit];\n      if (control.length > 0) {\n        const shown = [...new Set(control)]\n          .map((c) => `\\\\x${(c.codePointAt(0) as number).toString(16).padStart(2, '0')}`)\n          .join(', ');\n        const plural = control.length === 1 ? '' : 's';\n        const both = inLabel.length > 0 && inUnit.length > 0;\n        const field = both ? 'label and unit contain' : inLabel.length > 0 ? 'label contains' : 'unit contains';\n        // Where they land, which is the question the reader has. A label becomes a column\n        // name in signals.csv; a unit is a cell of channels.csv and nothing else.\n        const lands = both\n          ? 'which will appear in the CSV column name and in channels.csv\\'s unit cell'\n          : inLabel.length > 0\n            ? 'which will appear in the CSV column name'\n            : 'which will appear in channels.csv\\'s unit cell';\n        diagnostics.push({\n          code: 'NONPRINTABLE_LABEL',\n          severity: 'warning',\n          message:\n            `Signal ${i}'s ${field} ${control.length} control character${plural} ` +\n            `(${shown}), ${lands} exactly as the header has them.`,\n          hint:\n            (inLabel.length > 0\n              ? `Address the channel by position with --channels \"#${i}\" rather than by name, ` +\n                'since the name cannot be typed. '\n              : `The column name is unaffected, so --channels \"${label}\" still selects it. `) +\n            'Printing the CSV to a terminal may do more than print it.',\n        });\n      }\n\n      if (label === '') {\n        // Collected, not reported here: what this channel's column ends up called depends on\n        // whether some later channel is literally labelled `signal_<i>`, and inside this loop\n        // the later channels do not exist yet. See the pass below.\n        emptyLabels.push(i);\n      } else {\n        // Collected rather than reported here: a label repeated five times should\n        // produce one warning naming all five, not four near-identical pairs.\n        const seen = seenLabels.get(label);\n        if (seen) seen.push(i);\n        else seenLabels.set(label, [i]);\n      }\n\n      if (samplesPerRecord === 0) {\n        diagnostics.push({\n          code: 'NO_SAMPLES',\n          severity: 'warning',\n          message: `Signal ${i} (\"${label}\") carries no samples at all (0 per data record).`,\n          hint: 'It is described in channels.csv but left out of the converted data.',\n        });\n      }\n\n      /*\n        Too large to represent, and too small — the second was silent.\n\n        The gain is the span divided by the digital range, and a span of 2e-320 over 65,535\n        codes is 3e-325: below the smallest subnormal double, so it underflows to +0. The\n        scaler's flat-range branch then handed every code the same physical value, and a\n        channel of 65,536 distinct readings became one repeated number with nothing raised at\n        all. One power of ten away, at 1e-319, the same file raises VALUE_RESOLUTION.\n\n        Both are the same fact about the header — the span cannot be turned into a mapping —\n        so both get this code, and both leave the cells empty rather than filling them with a\n        value the header cannot justify.\n      */\n      const span = physicalMax - physicalMin;\n      const underflowed = span !== 0 && span / (digitalMax - digitalMin) === 0;\n      if (!Number.isFinite(span) || underflowed) {\n        diagnostics.push({\n          code: 'UNUSABLE_PHYSICAL_RANGE',\n          severity: 'warning',\n          message:\n            `Signal ${i} (\"${label}\") declares a physical range from ${physicalMin} to ` +\n            `${physicalMax}, whose span is too ${underflowed ? 'small' : 'large'} to ` +\n            `represent, so its values cannot be scaled.`,\n          hint: 'Its cells are left empty rather than filled with a value the header cannot justify.',\n        });\n      } else if (digitalMax === digitalMin) {\n        diagnostics.push({\n          code: 'DEGENERATE_DIGITAL_RANGE',\n          severity: 'warning',\n          message:\n            `Signal ${i} (\"${label}\") has digital minimum equal to digital maximum ` +\n            `(${digitalMin}), so its values cannot be scaled.`,\n          hint: 'Its cells are left empty rather than filled with a value the header cannot justify.',\n        });\n      } else if (physicalMax === physicalMin) {\n        diagnostics.push({\n          code: 'DEGENERATE_PHYSICAL_RANGE',\n          severity: 'warning',\n          message:\n            `Signal ${i} (\"${label}\") has physical minimum equal to physical maximum ` +\n            `(${physicalMin}), so every sample converts to the same value.`,\n        });\n      } else if ((physicalMax - physicalMin) * (digitalMax - digitalMin) < 0) {\n        /*\n          Polarity is inverted when the gain is negative, and the gain is\n          (physicalMax - physicalMin) / (digitalMax - digitalMin) — so it is the sign of the\n          two spans together that matters, not the physical pair alone.\n\n          Testing only `physicalMax < physicalMin` was wrong in both directions. A file with\n          its DIGITAL bounds reversed is just as inverted and drew no warning at all, handing\n          back sign-flipped EEG with nothing to indicate it. A file with BOTH pairs reversed\n          has a positive gain and is not inverted, yet was warned about — a message that was\n          simply untrue of that recording.\n        */\n        const reversed =\n          physicalMax < physicalMin\n            ? `physical minimum ${physicalMin} above physical maximum ${physicalMax}`\n            : `digital minimum ${digitalMin} above digital maximum ${digitalMax}`;\n        diagnostics.push({\n          code: 'INVERTED_PHYSICAL_RANGE',\n          severity: 'warning',\n          message: `Signal ${i} (\"${label}\") declares ${reversed}, which inverts its polarity.`,\n          hint: 'The values are converted exactly as the header specifies, inversion included.',\n        });\n      }\n    }\n  }\n\n  /*\n    What an unlabelled channel is actually called, which the message used to guess.\n\n    A channel with no label takes `signal_<index>` — unless another channel is literally\n    labelled that, which EDF permits, since labels are free text and nothing enforces anything\n    about them. Then both collide and both are suffixed. The warning said \"It will appear as\n    \"signal_0\"\" while the file's header read `time_s,signal_0_ch0,signal_0_ch1`: the one\n    sentence the run printed named a column that exists in neither signals.csv nor\n    channels.csv.\n\n    The other half was silent. The channel that genuinely carries the label `signal_0` lost\n    its own column name to a collision with a synthesised one, and nothing said so —\n    DUPLICATE_LABEL did not fire, because the two labels are not the same label. Both halves\n    are one sentence here, because they are one event.\n\n    No specific suffixed name is quoted. The suffix rule has a second pass for names that are\n    still shared afterwards, and a message that hard-coded `_ch<index>` would be guessing again\n    in exactly the way this is fixing.\n  */\n  for (const index of emptyLabels) {\n    const taken = seenLabels.get(`signal_${index}`);\n    diagnostics.push({\n      code: 'EMPTY_LABEL',\n      severity: 'warning',\n      message:\n        taken === undefined\n          ? `Signal ${index} has no label. It will appear as \"signal_${index}\".`\n          : `Signal ${index} has no label, so it takes the name \"signal_${index}\" — which ` +\n            `${taken.length === 1 ? 'signal' : 'signals'} ${listed(taken.map(String))} already ` +\n            `${taken.length === 1 ? 'carries' : 'carry'} as a label, so both columns are ` +\n            `suffixed with their position instead.`,\n    });\n  }\n\n  for (const [label, indices] of seenLabels) {\n    if (indices.length < 2) continue;\n    diagnostics.push({\n      code: 'DUPLICATE_LABEL',\n      severity: 'warning',\n      message: `${indices.length} signals share the label \"${label}\" (positions ${indices.join(', ')}).`,\n      hint: 'Their columns are suffixed with the signal number so they stay distinguishable.',\n    });\n  }\n\n  const recordBytes = byteOffsetInRecord;\n  if (recordBytes <= 0) {\n    throw new EdfError(\n      'NO_SAMPLES',\n      'No signal in this file carries any samples (every channel declares 0 samples per record).',\n    );\n  }\n\n  if (sawComma.value) {\n    diagnostics.push({\n      code: 'COMMA_DECIMAL',\n      severity: 'warning',\n      message: 'Some header numbers use a comma decimal separator, which the EDF spec does not allow.',\n      hint: 'They were read as decimal points. Check the values in the channel table.',\n    });\n  }\n\n  const dataBytes = fileSize - expectedHeaderBytes;\n  if (dataBytes < 0) {\n    throw new EdfError('FILE_TOO_SMALL', `File is smaller than its own header.`);\n  }\n  const recordCount = Math.floor(dataBytes / recordBytes);\n  const trailingBytes = dataBytes - recordCount * recordBytes;\n\n  if (recordCount === 0) {\n    throw new EdfError(\n      'NO_DATA_RECORDS',\n      'The file contains a header but no complete data record.',\n      'The recording was probably interrupted before any data was written.',\n    );\n  }\n\n  if (declaredRecordCount === -1) {\n    diagnostics.push({\n      code: 'RECORD_COUNT_UNKNOWN',\n      severity: 'warning',\n      message:\n        `The header does not say how many data records the file has (-1), which the spec allows ` +\n        `for recordings still in progress. Using the ${counted(recordCount, 'record')} the file actually contains.`,\n    });\n  } else if (declaredRecordCount !== recordCount) {\n    diagnostics.push({\n      code: 'RECORD_COUNT_MISMATCH',\n      severity: 'warning',\n      message:\n        `The header declares ${declaredRecordCount} data records but the file contains ` +\n        `${recordCount}. Converting the ${counted(recordCount, 'record')} that ${recordCount === 1 ? 'is' : 'are'} present.`,\n      hint:\n        declaredRecordCount > recordCount\n          ? 'The recording looks truncated. It may have been cut short or copied incompletely.'\n          : 'The file is longer than its header claims.',\n    });\n  }\n\n  if (trailingBytes > 0) {\n    diagnostics.push({\n      code: 'TRAILING_BYTES',\n      severity: 'warning',\n      message: `${counted(trailingBytes, 'byte')} after the last complete data record ${trailingBytes === 1 ? 'was' : 'were'} ignored.`,\n    });\n  }\n\n  const isEdfPlus = continuity !== null;\n  if (continuity === 'EDF+D') {\n    diagnostics.push({\n      code: 'DISCONTINUOUS',\n      severity: 'warning',\n      message:\n        `This is a discontinuous (${isBdf ? 'BDF+D' : 'EDF+D'}) recording: its data records are ` +\n        `not contiguous in time.`,\n      hint: 'Each row carries its true recording time, so gaps stay visible instead of being closed.',\n    });\n  }\n\n  const dataSignals = signals.filter((s) => !s.isAnnotations);\n  if (dataSignals.length === 0) {\n    diagnostics.push({\n      code: 'NO_SIGNAL_CHANNELS',\n      severity: 'warning',\n      message: 'This file has no signal channels; it contains only EDF+ annotations.',\n    });\n  }\n\n  // A channel declaring zero samples per record has no sampling rate to speak of — it is\n  // reported separately as NO_SAMPLES and no file is written for it. Counting its nominal\n  // 0 Hz as a rate made a single-rate recording warn that it used \"2 different sampling\n  // rates (4 Hz, 0 Hz)\" and claim it was splitting output it never split.\n  const rates = new Set(dataSignals.filter((s) => s.samplesPerRecord > 0).map((s) => s.samplingRate));\n  if (rates.size > 1) {\n    diagnostics.push({\n      code: 'MIXED_SAMPLING_RATES',\n      severity: 'warning',\n      message:\n        `Channels use ${rates.size} different sampling rates ` +\n        `(${listed(formatRates([...rates].sort((a, b) => b - a)).map((r) => `${r} Hz`))}).`,\n      hint: 'They are written to one file per rate so no channel is resampled.',\n    });\n  }\n\n  return {\n    header: {\n      version,\n      patientId,\n      recordingId,\n      startDateRaw,\n      startTimeRaw,\n      startDateTime: resolveStartDateTime(startDateRaw, startTimeRaw),\n      headerBytes: expectedHeaderBytes,\n      declaredHeaderBytes: headerBytes,\n      reserved,\n      isEdfPlus,\n      isBdf,\n      continuity,\n      declaredRecordCount,\n      recordDuration,\n      signalCount,\n      signals,\n      bytesPerSample,\n      recordBytes,\n    },\n    recordCount,\n    trailingBytes,\n    diagnostics,\n  };\n}\n\n/**\n * The recording start as a zone-less wall clock, \"YYYY-MM-DDTHH:MM:SS\".\n *\n * EDF stores the start time as local wall-clock digits with no timezone anywhere in\n * the format. `startDateTime` is built with Date.UTC purely so those digits survive a\n * round trip unshifted, which makes it a carrier for the wall clock rather than a\n * real instant. Serialising it with `toISOString()` would append a Z and assert UTC,\n * and any reader converting to local time would then shift the recording by their own\n * offset: 13:43:04 in the file becomes 08:43:04 in New York. The Z is omitted because\n * the file genuinely does not say which zone it meant.\n */\nexport function formatWallClock(date: Date | null): string | null {\n  if (!date) return null;\n  return date.toISOString().slice(0, 19);\n}\n\n/** \"EDF\", \"EDF+ (EDF+D)\", \"BDF\", \"BDF+ (EDF+C)\". */\nexport function describeFormat(header: EdfHeader): string {\n  const base = header.isBdf ? 'BDF' : 'EDF';\n  if (!header.isEdfPlus) return base;\n  return `${base}+ (${header.continuity === 'EDF+D' ? 'discontinuous' : 'continuous'})`;\n}\n\n/** Render a sampling rate without trailing noise: 256, 0.5, 12.5. */\nexport function formatRate(hz: number): string {\n  if (Number.isInteger(hz)) return String(hz);\n  const rounded = Number(hz.toFixed(6));\n  // A rate below 5e-7 rounds away to \"0\", which reads as \"this channel has no sampling\n  // rate\" and made the mixed-rate warning contradict itself: it announced two different\n  // rates and then printed both as \"0 Hz\". Exponent form keeps a real rate legible, and\n  // keeps distinct rates distinct in the channel table and in output filenames.\n  if (rounded === 0) return hz.toExponential(3);\n  return String(rounded);\n}\n\n/**\n * Renders a group of rates so that rates which differ read as differing.\n *\n * `formatRate` rounds to six decimals, which is what keeps an ordinary rate free of\n * float noise — 30 samples in a 0.1-second record is 299.99999999999994 as a double,\n * and belongs on screen as 300. Two rates separated by less than that round to one\n * string, so a file carrying 1e-6 Hz and 1.25e-6 Hz warned that it used \"2 different\n * sampling rates (0.000001 Hz, 0.000001 Hz)\" and named both files the same thing.\n *\n * That is the contradiction the exponent fallback above already removes for rates that\n * round away to zero; this is the same one a step further out. On a collision every rate\n * in the group switches to its shortest exact form, which is unique for distinct values,\n * rather than only the pair that collided — one column in one notation reads better than\n * two.\n */\nexport function formatRates(rates: readonly number[]): string[] {\n  const rounded = rates.map(formatRate);\n  const distinct = new Set(rates).size;\n  return new Set(rounded).size === distinct ? rounded : rates.map((hz) => String(hz));\n}\n"]}

package/dist/edf/scale.js

@@ -37,10 +37,24 @@ export function makeScaler(signal) {
     if (digitalMax === digitalMin)
         return () => NaN;
     const gain = (physicalMax - physicalMin) / (digitalMax - digitalMin);
-    // A flat physical range makes every sample the same value, and would divide by
-    // zero in the offset below. That mapping is defined, so its constant is written.
+    /*
+      A flat physical range makes every sample the same value, and would divide by zero in the
+      offset below. That mapping is defined, so its constant is written.
+  
+      A gain of zero does not always mean flat, and this could not tell the difference. A range
+      of -1e-320 to 1e-320 is not flat — it is 65,536 distinct physical values — but the gain
+      is 2e-320/65535, which is smaller than the smallest subnormal double and underflows to
+      +0. Every distinct sample then took `physicalMin`, so eight codes spanning -16,000 to
+      +12,000 came out as one repeated number, with no diagnostic anywhere and `--strict`
+      exiting 0. At 1e-319, one power of ten away, the same file raises VALUE_RESOLUTION.
+  
+      That is the same situation as the overflow below it, which this codebase already reasoned
+      about and answered: the span cannot be represented, so there is no mapping, so the cells
+      are left empty rather than filled with a value the header cannot justify. Underflow only
+      got the flat-range treatment because `gain === 0` is what both look like from here.
+    */
     if (gain === 0)
-        return () => physicalMin;
+        return physicalMax === physicalMin ? () => physicalMin : () => NaN;
     // A non-finite gain is a different thing: the physical span overflowed a double, so
     // there is no mapping at all. Returning physicalMin filled the column with one enormous
     // constant — every distinct sample rendered as the same 300-digit number — and raised

package/dist/edf/scale.js.map

@@ -1 +1 @@
-{"version":3,"file":"scale.js","sourceRoot":"","sources":["../../src/edf/scale.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;GAwBG;AAMH,MAAM,UAAU,UAAU,CAAC,MAAiB;IAC1C,MAAM,EAAE,UAAU,EAAE,UAAU,EAAE,WAAW,EAAE,WAAW,EAAE,GAAG,MAAM,CAAC;IAEpE,oFAAoF;IACpF,gEAAgE;IAChE,EAAE;IACF,oFAAoF;IACpF,oFAAoF;IACpF,qFAAqF;IACrF,oFAAoF;IACpF,iFAAiF;IACjF,oEAAoE;IACpE,IAAI,UAAU,KAAK,UAAU;QAAE,OAAO,GAAG,EAAE,CAAC,GAAG,CAAC;IAEhD,MAAM,IAAI,GAAG,CAAC,WAAW,GAAG,WAAW,CAAC,GAAG,CAAC,UAAU,GAAG,UAAU,CAAC,CAAC;IAErE,+EAA+E;IAC/E,iFAAiF;IACjF,IAAI,IAAI,KAAK,CAAC;QAAE,OAAO,GAAG,EAAE,CAAC,WAAW,CAAC;IAEzC,oFAAoF;IACpF,wFAAwF;IACxF,sFAAsF;IACtF,qFAAqF;IACrF,kDAAkD;IAClD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,GAAG,EAAE,CAAC,GAAG,CAAC;IAE7C,mFAAmF;IACnF,kFAAkF;IAClF,6EAA6E;IAC7E,6CAA6C;IAC7C,MAAM,MAAM,GAAG,WAAW,GAAG,IAAI,GAAG,UAAU,CAAC;IAC/C,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,MAAM,CAAC,EAAE,CAAC;QAC7B,OAAO,CAAC,OAAe,EAAU,EAAE,CAAC,CAAC,OAAO,GAAG,UAAU,CAAC,GAAG,IAAI,GAAG,WAAW,CAAC;IAClF,CAAC;IAED,OAAO,CAAC,OAAe,EAAU,EAAE,CAAC,IAAI,GAAG,CAAC,MAAM,GAAG,OAAO,CAAC,CAAC;AAChE,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,gBAAgB,CAAC,MAAiB;IAChD,MAAM,WAAW,GAAG,MAAM,CAAC,UAAU,GAAG,MAAM,CAAC,UAAU,CAAC;IAC1D,IAAI,WAAW,KAAK,CAAC;QAAE,OAAO,CAAC,CAAC;IAChC,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,MAAM,CAAC,WAAW,GAAG,MAAM,CAAC,WAAW,CAAC,GAAG,WAAW,CAAC,CAAC;AAC3E,CAAC;AAED;;;;;;;;;GASG;AACH,MAAM,oBAAoB,GAAG,GAAG,CAAC;AAEjC;;;;;;;;;;GAUG;AACH,MAAM,UAAU,iBAAiB,CAAC,MAAiB,EAAE,GAAG,GAAG,oBAAoB;IAC7E,MAAM,IAAI,GAAG,gBAAgB,CAAC,MAAM,CAAC,CAAC;IACtC,IAAI,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,CAAC,CAAC;IACpD,MAAM,MAAM,GAAG,IAAI,CAAC,IAAI,CAAC,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC;IAChD,OAAO,IAAI,CAAC,GAAG,CAAC,GAAG,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,MAAM,CAAC,CAAC,CAAC;AAC5C,CAAC;AAED;;;;;;;;;;;;GAYG;AACH,MAAM,UAAU,kBAAkB,CAAC,MAAiB;IAClD,MAAM,IAAI,GAAG,gBAAgB,CAAC,MAAM,CAAC,CAAC;IACtC,IAAI,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,KAAK,CAAC;IACxD,OAAO,IAAI,CAAC,IAAI,CAAC,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,GAAG,oBAAoB,CAAC;AACjE,CAAC","sourcesContent":["/**\n * Digital-to-physical conversion.\n *\n * EDF defines the mapping by two calibration points, (digitalMin -> physicalMin)\n * and (digitalMax -> physicalMax), which the specification writes as:\n *\n *   gain     = (physicalMax - physicalMin) / (digitalMax - digitalMin)\n *   physical = (digital - digitalMin) * gain + physicalMin\n *\n * That form is evaluated here in EDFlib's algebraically equivalent arrangement:\n *\n *   offset   = physicalMax / gain - digitalMax\n *   physical = gain * (offset + digital)\n *\n * The rearrangement is not cosmetic. Written the first way, a channel spanning\n * +/-800 uV computes a value near 800 and then subtracts 800, and the cancellation\n * throws away low-order bits: digital 0 yields 0.19536019536019467 when the exact\n * value is 0.19536019536019536. EDFlib's form keeps the intermediate small\n * (offset + digital = 0.5 here) and returns the correctly rounded result.\n *\n * Both properties matter. The values are as accurate as a double can express, and\n * they are bit-identical to pyEDFlib and EDFbrowser, which share EDFlib's arithmetic,\n * so the test suite can assert exact equality against a reference implementation\n * rather than settling for a tolerance.\n */\n\nimport type { EdfSignal } from './header.js';\n\nexport type Scaler = (digital: number) => number;\n\nexport function makeScaler(signal: EdfSignal): Scaler {\n  const { digitalMin, digitalMax, physicalMin, physicalMax } = signal;\n\n  // A zero digital span leaves the mapping undefined — the header contradicts itself,\n  // so there is no physical value for any sample on this channel.\n  //\n  // NaN rather than a stand-in number. Writing the physical minimum produces a column\n  // of plausible readings (\"-100.000\" repeated) that is indistinguishable from a real\n  // flat recording once the CSV is opened somewhere else, which is exactly the kind of\n  // invented data this tool exists to avoid. NaN carries through to an empty CSV cell\n  // and reads back as NaN in pandas, matching how a missing annotation duration is\n  // already written. DEGENERATE_DIGITAL_RANGE is raised alongside it.\n  if (digitalMax === digitalMin) return () => NaN;\n\n  const gain = (physicalMax - physicalMin) / (digitalMax - digitalMin);\n\n  // A flat physical range makes every sample the same value, and would divide by\n  // zero in the offset below. That mapping is defined, so its constant is written.\n  if (gain === 0) return () => physicalMin;\n\n  // A non-finite gain is a different thing: the physical span overflowed a double, so\n  // there is no mapping at all. Returning physicalMin filled the column with one enormous\n  // constant — every distinct sample rendered as the same 300-digit number — and raised\n  // nothing. NaN takes the same route as a degenerate digital range: empty cells, plus\n  // UNUSABLE_PHYSICAL_RANGE from the header parser.\n  if (!Number.isFinite(gain)) return () => NaN;\n\n  // Deriving the offset divides by the gain. For every realistic calibration that is\n  // both safe and more accurate, but an absurd header (a huge physical range over a\n  // near-zero gain) could overflow it, so fall back to the specification's own\n  // arrangement rather than emitting Infinity.\n  const offset = physicalMax / gain - digitalMax;\n  if (!Number.isFinite(offset)) {\n    return (digital: number): number => (digital - digitalMin) * gain + physicalMin;\n  }\n\n  return (digital: number): number => gain * (offset + digital);\n}\n\n/**\n * Smallest physical step this channel can express — one digital unit.\n * Used to choose a decimal precision that preserves every distinct sample value.\n */\nexport function quantizationStep(signal: EdfSignal): number {\n  const digitalSpan = signal.digitalMax - signal.digitalMin;\n  if (digitalSpan === 0) return 0;\n  return Math.abs((signal.physicalMax - signal.physicalMin) / digitalSpan);\n}\n\n/**\n * The most `toFixed` accepts. 101 is a RangeError, so this is the ceiling, not a taste.\n *\n * It used to be 20, on the stated grounds that 20 was what `toFixed` allowed. It is not,\n * and the gap was not academic: a magnetometer channel spanning ±1e-16 T over a 16-bit\n * converter has a step of 3.05e-21 and needs 23 places. Clamped to 20, every value landed\n * on a 1e-20 grid — about three digital codes to a printed value — so 69% of the samples\n * could not be recovered, the conversion exited 0, and nothing said a word. The channel\n * type the old comment named as the reason for the ceiling was the one it broke.\n */\nconst MAX_DERIVED_DECIMALS = 100;\n\n/**\n * Decimal places needed so that two adjacent digital codes never round to the same\n * string. Two places past the quantization step keep rounding error far below the\n * resolution the hardware actually recorded, without padding the file with digits\n * that carry no information.\n *\n * Ordinary channels land at three or four: a ±800 µV channel over 12 bits steps by\n * 0.39 µV and needs three. The ceiling is only reached by calibrations whose step is\n * below 1e-98, which an 8-character physical bound can still express — `1e-99` is five\n * characters. Those get VALUE_RESOLUTION rather than silence.\n */\nexport function decimalsForSignal(signal: EdfSignal, max = MAX_DERIVED_DECIMALS): number {\n  const step = quantizationStep(signal);\n  if (!(step > 0) || !Number.isFinite(step)) return 3;\n  const needed = Math.ceil(-Math.log10(step)) + 2;\n  return Math.min(max, Math.max(0, needed));\n}\n\n/**\n * Whether this channel's step is finer than any precision the tool can print.\n *\n * Asked of the ceiling, not of the precision in use. `--decimals 2` on a channel needing 3\n * is a trade the caller made knowingly and is not this warning's business — 0.5.10 fixed a\n * version of this that fired on every ordinary EEG at `--decimals 2` and made\n * `--decimals 2 --strict` impossible. But it fixed it by asking \"did the caller choose the\n * precision\", which suppressed the real case too: at `--decimals 20` a channel stepping by\n * 1e-106 printed every one of its codes as `0.00000000000000000000`, in silence.\n *\n * The question is whether anything the tool can print would separate consecutive codes. When\n * the answer is no, that is a ceiling nobody chose, and it holds whatever `--decimals` says.\n */\nexport function decimalsAreClamped(signal: EdfSignal): boolean {\n  const step = quantizationStep(signal);\n  if (!(step > 0) || !Number.isFinite(step)) return false;\n  return Math.ceil(-Math.log10(step)) + 2 > MAX_DERIVED_DECIMALS;\n}\n"]}
+{"version":3,"file":"scale.js","sourceRoot":"","sources":["../../src/edf/scale.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;GAwBG;AAMH,MAAM,UAAU,UAAU,CAAC,MAAiB;IAC1C,MAAM,EAAE,UAAU,EAAE,UAAU,EAAE,WAAW,EAAE,WAAW,EAAE,GAAG,MAAM,CAAC;IAEpE,oFAAoF;IACpF,gEAAgE;IAChE,EAAE;IACF,oFAAoF;IACpF,oFAAoF;IACpF,qFAAqF;IACrF,oFAAoF;IACpF,iFAAiF;IACjF,oEAAoE;IACpE,IAAI,UAAU,KAAK,UAAU;QAAE,OAAO,GAAG,EAAE,CAAC,GAAG,CAAC;IAEhD,MAAM,IAAI,GAAG,CAAC,WAAW,GAAG,WAAW,CAAC,GAAG,CAAC,UAAU,GAAG,UAAU,CAAC,CAAC;IAErE;;;;;;;;;;;;;;;MAeE;IACF,IAAI,IAAI,KAAK,CAAC;QAAE,OAAO,WAAW,KAAK,WAAW,CAAC,CAAC,CAAC,GAAW,EAAE,CAAC,WAAW,CAAC,CAAC,CAAC,GAAW,EAAE,CAAC,GAAG,CAAC;IAEnG,oFAAoF;IACpF,wFAAwF;IACxF,sFAAsF;IACtF,qFAAqF;IACrF,kDAAkD;IAClD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,GAAG,EAAE,CAAC,GAAG,CAAC;IAE7C,mFAAmF;IACnF,kFAAkF;IAClF,6EAA6E;IAC7E,6CAA6C;IAC7C,MAAM,MAAM,GAAG,WAAW,GAAG,IAAI,GAAG,UAAU,CAAC;IAC/C,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,MAAM,CAAC,EAAE,CAAC;QAC7B,OAAO,CAAC,OAAe,EAAU,EAAE,CAAC,CAAC,OAAO,GAAG,UAAU,CAAC,GAAG,IAAI,GAAG,WAAW,CAAC;IAClF,CAAC;IAED,OAAO,CAAC,OAAe,EAAU,EAAE,CAAC,IAAI,GAAG,CAAC,MAAM,GAAG,OAAO,CAAC,CAAC;AAChE,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,gBAAgB,CAAC,MAAiB;IAChD,MAAM,WAAW,GAAG,MAAM,CAAC,UAAU,GAAG,MAAM,CAAC,UAAU,CAAC;IAC1D,IAAI,WAAW,KAAK,CAAC;QAAE,OAAO,CAAC,CAAC;IAChC,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,MAAM,CAAC,WAAW,GAAG,MAAM,CAAC,WAAW,CAAC,GAAG,WAAW,CAAC,CAAC;AAC3E,CAAC;AAED;;;;;;;;;GASG;AACH,MAAM,oBAAoB,GAAG,GAAG,CAAC;AAEjC;;;;;;;;;;GAUG;AACH,MAAM,UAAU,iBAAiB,CAAC,MAAiB,EAAE,GAAG,GAAG,oBAAoB;IAC7E,MAAM,IAAI,GAAG,gBAAgB,CAAC,MAAM,CAAC,CAAC;IACtC,IAAI,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,CAAC,CAAC;IACpD,MAAM,MAAM,GAAG,IAAI,CAAC,IAAI,CAAC,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC;IAChD,OAAO,IAAI,CAAC,GAAG,CAAC,GAAG,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,MAAM,CAAC,CAAC,CAAC;AAC5C,CAAC;AAED;;;;;;;;;;;;GAYG;AACH,MAAM,UAAU,kBAAkB,CAAC,MAAiB;IAClD,MAAM,IAAI,GAAG,gBAAgB,CAAC,MAAM,CAAC,CAAC;IACtC,IAAI,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,KAAK,CAAC;IACxD,OAAO,IAAI,CAAC,IAAI,CAAC,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,GAAG,oBAAoB,CAAC;AACjE,CAAC","sourcesContent":["/**\n * Digital-to-physical conversion.\n *\n * EDF defines the mapping by two calibration points, (digitalMin -> physicalMin)\n * and (digitalMax -> physicalMax), which the specification writes as:\n *\n *   gain     = (physicalMax - physicalMin) / (digitalMax - digitalMin)\n *   physical = (digital - digitalMin) * gain + physicalMin\n *\n * That form is evaluated here in EDFlib's algebraically equivalent arrangement:\n *\n *   offset   = physicalMax / gain - digitalMax\n *   physical = gain * (offset + digital)\n *\n * The rearrangement is not cosmetic. Written the first way, a channel spanning\n * +/-800 uV computes a value near 800 and then subtracts 800, and the cancellation\n * throws away low-order bits: digital 0 yields 0.19536019536019467 when the exact\n * value is 0.19536019536019536. EDFlib's form keeps the intermediate small\n * (offset + digital = 0.5 here) and returns the correctly rounded result.\n *\n * Both properties matter. The values are as accurate as a double can express, and\n * they are bit-identical to pyEDFlib and EDFbrowser, which share EDFlib's arithmetic,\n * so the test suite can assert exact equality against a reference implementation\n * rather than settling for a tolerance.\n */\n\nimport type { EdfSignal } from './header.js';\n\nexport type Scaler = (digital: number) => number;\n\nexport function makeScaler(signal: EdfSignal): Scaler {\n  const { digitalMin, digitalMax, physicalMin, physicalMax } = signal;\n\n  // A zero digital span leaves the mapping undefined — the header contradicts itself,\n  // so there is no physical value for any sample on this channel.\n  //\n  // NaN rather than a stand-in number. Writing the physical minimum produces a column\n  // of plausible readings (\"-100.000\" repeated) that is indistinguishable from a real\n  // flat recording once the CSV is opened somewhere else, which is exactly the kind of\n  // invented data this tool exists to avoid. NaN carries through to an empty CSV cell\n  // and reads back as NaN in pandas, matching how a missing annotation duration is\n  // already written. DEGENERATE_DIGITAL_RANGE is raised alongside it.\n  if (digitalMax === digitalMin) return () => NaN;\n\n  const gain = (physicalMax - physicalMin) / (digitalMax - digitalMin);\n\n  /*\n    A flat physical range makes every sample the same value, and would divide by zero in the\n    offset below. That mapping is defined, so its constant is written.\n\n    A gain of zero does not always mean flat, and this could not tell the difference. A range\n    of -1e-320 to 1e-320 is not flat — it is 65,536 distinct physical values — but the gain\n    is 2e-320/65535, which is smaller than the smallest subnormal double and underflows to\n    +0. Every distinct sample then took `physicalMin`, so eight codes spanning -16,000 to\n    +12,000 came out as one repeated number, with no diagnostic anywhere and `--strict`\n    exiting 0. At 1e-319, one power of ten away, the same file raises VALUE_RESOLUTION.\n\n    That is the same situation as the overflow below it, which this codebase already reasoned\n    about and answered: the span cannot be represented, so there is no mapping, so the cells\n    are left empty rather than filled with a value the header cannot justify. Underflow only\n    got the flat-range treatment because `gain === 0` is what both look like from here.\n  */\n  if (gain === 0) return physicalMax === physicalMin ? (): number => physicalMin : (): number => NaN;\n\n  // A non-finite gain is a different thing: the physical span overflowed a double, so\n  // there is no mapping at all. Returning physicalMin filled the column with one enormous\n  // constant — every distinct sample rendered as the same 300-digit number — and raised\n  // nothing. NaN takes the same route as a degenerate digital range: empty cells, plus\n  // UNUSABLE_PHYSICAL_RANGE from the header parser.\n  if (!Number.isFinite(gain)) return () => NaN;\n\n  // Deriving the offset divides by the gain. For every realistic calibration that is\n  // both safe and more accurate, but an absurd header (a huge physical range over a\n  // near-zero gain) could overflow it, so fall back to the specification's own\n  // arrangement rather than emitting Infinity.\n  const offset = physicalMax / gain - digitalMax;\n  if (!Number.isFinite(offset)) {\n    return (digital: number): number => (digital - digitalMin) * gain + physicalMin;\n  }\n\n  return (digital: number): number => gain * (offset + digital);\n}\n\n/**\n * Smallest physical step this channel can express — one digital unit.\n * Used to choose a decimal precision that preserves every distinct sample value.\n */\nexport function quantizationStep(signal: EdfSignal): number {\n  const digitalSpan = signal.digitalMax - signal.digitalMin;\n  if (digitalSpan === 0) return 0;\n  return Math.abs((signal.physicalMax - signal.physicalMin) / digitalSpan);\n}\n\n/**\n * The most `toFixed` accepts. 101 is a RangeError, so this is the ceiling, not a taste.\n *\n * It used to be 20, on the stated grounds that 20 was what `toFixed` allowed. It is not,\n * and the gap was not academic: a magnetometer channel spanning ±1e-16 T over a 16-bit\n * converter has a step of 3.05e-21 and needs 23 places. Clamped to 20, every value landed\n * on a 1e-20 grid — about three digital codes to a printed value — so 69% of the samples\n * could not be recovered, the conversion exited 0, and nothing said a word. The channel\n * type the old comment named as the reason for the ceiling was the one it broke.\n */\nconst MAX_DERIVED_DECIMALS = 100;\n\n/**\n * Decimal places needed so that two adjacent digital codes never round to the same\n * string. Two places past the quantization step keep rounding error far below the\n * resolution the hardware actually recorded, without padding the file with digits\n * that carry no information.\n *\n * Ordinary channels land at three or four: a ±800 µV channel over 12 bits steps by\n * 0.39 µV and needs three. The ceiling is only reached by calibrations whose step is\n * below 1e-98, which an 8-character physical bound can still express — `1e-99` is five\n * characters. Those get VALUE_RESOLUTION rather than silence.\n */\nexport function decimalsForSignal(signal: EdfSignal, max = MAX_DERIVED_DECIMALS): number {\n  const step = quantizationStep(signal);\n  if (!(step > 0) || !Number.isFinite(step)) return 3;\n  const needed = Math.ceil(-Math.log10(step)) + 2;\n  return Math.min(max, Math.max(0, needed));\n}\n\n/**\n * Whether this channel's step is finer than any precision the tool can print.\n *\n * Asked of the ceiling, not of the precision in use. `--decimals 2` on a channel needing 3\n * is a trade the caller made knowingly and is not this warning's business — 0.5.10 fixed a\n * version of this that fired on every ordinary EEG at `--decimals 2` and made\n * `--decimals 2 --strict` impossible. But it fixed it by asking \"did the caller choose the\n * precision\", which suppressed the real case too: at `--decimals 20` a channel stepping by\n * 1e-106 printed every one of its codes as `0.00000000000000000000`, in silence.\n *\n * The question is whether anything the tool can print would separate consecutive codes. When\n * the answer is no, that is a ceiling nobody chose, and it holds whatever `--decimals` says.\n */\nexport function decimalsAreClamped(signal: EdfSignal): boolean {\n  const step = quantizationStep(signal);\n  if (!(step > 0) || !Number.isFinite(step)) return false;\n  return Math.ceil(-Math.log10(step)) + 2 > MAX_DERIVED_DECIMALS;\n}\n"]}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "edf2csv",
-  "version": "0.5.81",
+  "version": "0.5.83",
   "description": "Convert EDF, EDF+ and BDF biosignal recordings (European Data Format) to CSV from the command line. Local, streaming, and never resamples or alters units.",
   "keywords": [
     "edf",