edf2csv 0.5.58 → 0.5.60

package/CHANGELOG.md

@@ -3,6 +3,61 @@
 Notable changes to edf2csv. Versions follow [semantic versioning](https://semver.org); while the
 major version is 0, a minor bump may contain breaking changes.
 
+## 0.5.60
+
+### Fixed: two window messages that were false about a recording not timed from zero
+
+The same three-second file as 0.5.59 — records running 1000s to 1003s, because that is what
+its first timekeeping annotation says — got two answers about itself, neither true.
+
+`--start 5000` said "is at or past the end of this **16m 43s** recording", while `--info` two
+lines away said "Duration 3s". 1003 seconds is where the recording ends on its own clock and
+is its length only when it begins at zero. It now names both, and only when they differ:
+"is at or past the end of this 3s recording, which runs from 1000s to 1003s." A recording
+timed from zero keeps the sentence it has always had.
+
+`--start 0 --end 1` warned that "The window **is inside the recording** but lands where there
+is no data — past the last sample, or inside a gap in a discontinuous file". The window sits
+entirely before the recording, which is neither of the two things offered, and following the
+advice led back to a report that did not mention the origin at all until two versions ago.
+When the window ends at or before the first sample it says so instead, and points at the
+`Timed from` line that now exists. A start at or past the end is already an error, so a window
+outside the recording can only be one that falls short of it — the gap wording is left exactly
+as it was for the case it describes, and the EDF+D fixture still gets it.
+
+## 0.5.59
+
+### Fixed: `--info` never said where a recording starts, on the recordings that do not start at zero
+
+0.4.9 made the first data record's timekeeping annotation the point a recording is timed
+from. A file whose first record says `+1000` therefore writes `time_s` from `1000.000`, and
+`--start` and `--end` are read on that same clock. None of that appeared in `--info`, which
+said
+
+```
+Duration   3s  (3 records of 1s)
+```
+
+and nothing else — three seconds, which reads as 0 to 3. `--start 0 --end 1` on that file
+then converted nothing and explained: "The window is inside the recording but lands where
+there is no data — past the last sample, or inside a gap in a discontinuous file. Run with
+--info to see where the records actually sit." `--info` was the one place the number was
+missing, and the advice was a loop.
+
+It is printed now, whenever it is not zero, and in seconds rather than through the duration
+formatter — this number exists to be typed back in, and `--start` takes `1000s` where it does
+not take "16m 40s":
+
+```
+Duration   3s  (3 records of 1s)
+Timed from 1000.000s  (first sample; --start and --end use this clock)
+```
+
+Under `--json` it is `first_sample_seconds`. `duration_seconds` and `time_span_seconds` were
+both already there and are both lengths; neither says where the length sits. The value was
+already in `plan.range` and already governed the row estimate printed underneath — it was
+simply never shown. A recording timed from zero, which is nearly all of them, gains no line.
+
 ## 0.5.58
 
 ### Fixed: a duration below zero was exported without comment

package/dist/cli/report.js

@@ -77,6 +77,25 @@ export function formatInfo(file, plan) {
     if (Math.abs(elapsedSpan - file.durationSeconds) > 1e-9) {
         lines.push(`Time span  ${formatDuration(elapsedSpan)}  (includes discontinuities)`);
     }
+    /*
+      Where the samples begin, when that is not zero.
+  
+      0.4.9 made the first record's timekeeping TAL the point a recording is timed from, so a
+      file whose TALs start at +1000 writes `time_s` from 1000.000 and takes `--start` and
+      `--end` on that same clock. None of that appeared here: the report said "Duration 3s",
+      which reads as 0 to 3, and `--start 0 --end 1` then selected nothing and answered with
+      "The window is inside the recording but lands where there is no data ... Run with --info
+      to see where the records actually sit" — pointing at this report, which was the one place
+      the number was missing. It is in `plan.range` already and governs the estimate printed
+      below; it was simply never shown.
+    */
+    const startsAt = plan.range.recordingStartSeconds;
+    if (Number.isFinite(startsAt) && Math.abs(startsAt) > 1e-9) {
+        // In seconds rather than through formatDuration, because this number is meant to be
+        // typed back in: `--start` takes `1000s`, and "16m 40s" is not something it accepts.
+        // It is also how the empty-window warning renders the window it was given.
+        lines.push(`Timed from ${startsAt.toFixed(3)}s  (first sample; --start and --end use this clock)`);
+    }
     lines.push(`Size       ${formatBytes(file.fileSize)}`);
     if (header.patientId)
         lines.push(`Patient    ${printable(header.patientId)}`);
@@ -210,6 +229,10 @@ export function infoJson(file, plan, indent = 2) {
         duration_seconds: file.durationSeconds,
         // For a discontinuous file this exceeds duration_seconds by the length of the gaps.
         time_span_seconds: plan.range.recordingEndSeconds - plan.range.recordingStartSeconds,
+        // Where `time_s` begins, and the clock `--start` and `--end` are read against. Usually
+        // zero; not when the first record's timekeeping TAL puts the recording elsewhere. Both
+        // of the fields above are lengths and neither says where that length sits.
+        first_sample_seconds: plan.range.recordingStartSeconds,
         annotation_channels: file.annotationSignals.length,
         channels: file.dataSignals.map((signal) => ({
             signal_index: signal.index,

package/dist/cli/report.js.map

@@ -1 +1 @@
-{"version":3,"file":"report.js","sourceRoot":"","sources":["../../src/cli/report.ts"],"names":[],"mappings":"AAAA;;;;;GAKG;AAIH,OAAO,EAAE,cAAc,EAAE,WAAW,EAAE,eAAe,EAAE,MAAM,kBAAkB,CAAC;AAChF,OAAO,EAAE,WAAW,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AAElE,OAAO,EAAE,sBAAsB,EAAE,MAAM,oBAAoB,CAAC;AAG5D,SAAS,KAAK,CAAC,IAAoC,EAAE,UAA+B;IAClF,IAAI,IAAI,CAAC,MAAM,KAAK,CAAC;QAAE,OAAO,EAAE,CAAC;IACjC,MAAM,KAAK,GAAa,EAAE,CAAC;IAC3B,KAAK,MAAM,GAAG,IAAI,IAAI,EAAE,CAAC;QACvB,GAAG,CAAC,OAAO,CAAC,CAAC,IAAI,EAAE,CAAC,EAAE,EAAE;YACtB,KAAK,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC,CAAC,IAAI,CAAC,EAAE,IAAI,CAAC,MAAM,CAAC,CAAC;QAClD,CAAC,CAAC,CAAC;IACL,CAAC;IACD,OAAO,IAAI;SACR,GAAG,CAAC,CAAC,GAAG,EAAE,EAAE,CACX,GAAG;SACA,GAAG,CAAC,CAAC,IAAI,EAAE,CAAC,EAAE,EAAE;QACf,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;QACxB,OAAO,UAAU,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC;IAC/D,CAAC,CAAC;SACD,IAAI,CAAC,IAAI,CAAC;SACV,OAAO,EAAE,CACb;SACA,IAAI,CAAC,IAAI,CAAC,CAAC;AAChB,CAAC;AAED;;;;;;;;;;;;;GAaG;AACH,MAAM,UAAU,SAAS,CAAC,IAAY;IACpC,4CAA4C;IAC5C,OAAO,IAAI,CAAC,OAAO,CAAC,gCAAgC,EAAE,CAAC,CAAC,EAAE,EAAE,CAC1D,MAAM,CAAC,CAAC,WAAW,CAAC,CAAC,CAAE,CAAC,QAAQ,CAAC,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,EAAE,CACxD,CAAC;AACJ,CAAC;AAED;;;;;;;;;;;;;GAaG;AACH,MAAM,UAAU,cAAc,CAAC,IAAY,EAAE,MAAM,GAAG,EAAE;IACtD,OAAO,IAAI;SACR,KAAK,CAAC,IAAI,CAAC;SACX,GAAG,CAAC,CAAC,IAAI,EAAE,KAAK,EAAE,EAAE,CAAC,CAAC,KAAK,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,GAAG,SAAS,CAAC,IAAI,CAAC,CAAC;SACnE,IAAI,CAAC,IAAI,CAAC,CAAC;AAChB,CAAC;AAED,0FAA0F;AAC1F,MAAM,UAAU,UAAU,CAAC,IAAa,EAAE,IAAoB;IAC5D,MAAM,EAAE,MAAM,EAAE,GAAG,IAAI,CAAC;IACxB,MAAM,KAAK,GAAa,EAAE,CAAC;IAE3B,KAAK,CAAC,IAAI,CAAC,cAAc,IAAI,CAAC,IAAI,EAAE,CAAC,CAAC;IACtC,KAAK,CAAC,IAAI,CAAC,cAAc,cAAc,CAAC,MAAM,CAAC,EAAE,CAAC,CAAC;IACnD,KAAK,CAAC,IAAI,CACR,cACE,eAAe,CAAC,MAAM,CAAC,aAAa,CAAC,EAAE,OAAO,CAAC,GAAG,EAAE,GAAG,CAAC;QACxD,GAAG,SAAS,CAAC,MAAM,CAAC,YAAY,CAAC,IAAI,SAAS,CAAC,MAAM,CAAC,YAAY,CAAC,gBACrE,EAAE,CACH,CAAC;IACF,KAAK,CAAC,IAAI,CACR,cAAc,cAAc,CAAC,IAAI,CAAC,eAAe,CAAC,MAAM,IAAI,CAAC,WAAW,eAAe,MAAM,CAAC,cAAc,IAAI,CACjH,CAAC;IACF,MAAM,WAAW,GAAG,IAAI,CAAC,KAAK,CAAC,mBAAmB,GAAG,IAAI,CAAC,KAAK,CAAC,qBAAqB,CAAC;IACtF,IAAI,IAAI,CAAC,GAAG,CAAC,WAAW,GAAG,IAAI,CAAC,eAAe,CAAC,GAAG,IAAI,EAAE,CAAC;QACxD,KAAK,CAAC,IAAI,CAAC,cAAc,cAAc,CAAC,WAAW,CAAC,8BAA8B,CAAC,CAAC;IACtF,CAAC;IACD,KAAK,CAAC,IAAI,CAAC,cAAc,WAAW,CAAC,IAAI,CAAC,QAAQ,CAAC,EAAE,CAAC,CAAC;IACvD,IAAI,MAAM,CAAC,SAAS;QAAE,KAAK,CAAC,IAAI,CAAC,cAAc,SAAS,CAAC,MAAM,CAAC,SAAS,CAAC,EAAE,CAAC,CAAC;IAC9E,IAAI,MAAM,CAAC,WAAW;QAAE,KAAK,CAAC,IAAI,CAAC,cAAc,SAAS,CAAC,MAAM,CAAC,WAAW,CAAC,EAAE,CAAC,CAAC;IAElF,MAAM,OAAO,GAAG,IAAI,CAAC,WAAW,CAAC;IACjC,KAAK,CAAC,IAAI,CAAC,EAAE,CAAC,CAAC;IACf,sFAAsF;IACtF,gFAAgF;IAChF,MAAM,eAAe,GAAG,IAAI,CAAC,iBAAiB,CAAC,MAAM,CAAC;IACtD,MAAM,cAAc,GAClB,eAAe,GAAG,CAAC;QACjB,CAAC,CAAC,MAAM,eAAe,sBAAsB,eAAe,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE;QAC/E,CAAC,CAAC,EAAE,CAAC;IACT,KAAK,CAAC,IAAI,CACR,cAAc,OAAO,CAAC,MAAM,UAAU,OAAO,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,GAAG,cAAc,EAAE,CACzF,CAAC;IACF,KAAK,CAAC,IAAI,CAAC,EAAE,CAAC,CAAC;IAEf,MAAM,IAAI,GAAe,CAAC,CAAC,GAAG,EAAE,QAAQ,EAAE,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,OAAO,EAAE,QAAQ,CAAC,CAAC,CAAC;IACvF,MAAM,OAAO,GAAG,IAAI,GAAG,EAAkB,CAAC;IAC1C,KAAK,MAAM,KAAK,IAAI,IAAI,CAAC,MAAM,EAAE,CAAC;QAChC,KAAK,MAAM,OAAO,IAAI,KAAK,CAAC,QAAQ;YAAE,OAAO,CAAC,GAAG,CAAC,OAAO,CAAC,MAAM,CAAC,KAAK,EAAE,KAAK,CAAC,QAAQ,CAAC,CAAC;IAC1F,CAAC;IACD,sFAAsF;IACtF,wFAAwF;IACxF,MAAM,QAAQ,GAAG,WAAW,CAAC,OAAO,CAAC,GAAG,CAAC,CAAC,MAAM,EAAE,EAAE,CAAC,MAAM,CAAC,YAAY,CAAC,CAAC,CAAC;IAC3E,KAAK,MAAM,CAAC,GAAG,EAAE,MAAM,CAAC,IAAI,OAAO,CAAC,OAAO,EAAE,EAAE,CAAC;QAC9C,IAAI,CAAC,IAAI,CAAC;YACR,MAAM,CAAC,MAAM,CAAC,KAAK,CAAC;YACpB,SAAS,CAAC,IAAI,CAAC,WAAW,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,EAAE,CAAC;YACnD,SAAS,CAAC,MAAM,CAAC,KAAK,CAAC;YACvB,SAAS,CAAC,MAAM,CAAC,iBAAiB,CAAC;YACnC,GAAG,QAAQ,CAAC,GAAG,CAAC,KAAK;YACrB,GAAG,MAAM,CAAC,WAAW,OAAO,MAAM,CAAC,WAAW,EAAE;YAChD;;;;;;cAME;YACF,OAAO,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC;gBACvB,CAAC,MAAM,CAAC,gBAAgB,KAAK,CAAC,CAAC,CAAC,CAAC,cAAc,CAAC,CAAC,CAAC,gBAAgB,CAAC;SACtE,CAAC,CAAC;IACL,CAAC;IACD,KAAK,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,EAAE,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAEtC,KAAK,CAAC,IAAI,CAAC,EAAE,CAAC,CAAC;IACf,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QAC3B,KAAK,CAAC,IAAI,CACR,IAAI,CAAC,MAAM,KAAK,MAAM;YACpB,CAAC,CAAC,qFAAqF;gBACrF,2EAA2E;YAC7E,CAAC,CAAC,qDAAqD,IAAI,CAAC,MAAM,CAAC,MAAM,wBAAwB;gBAC/F,0BAA0B,CAC/B,CAAC;IACJ,CAAC;IACD;;;;;;;;;;;;MAYE;IACF;;;;;;;;MAQE;IACF,IAAI,CAAC,IAAI,CAAC,YAAY,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QACnD,sFAAsF;QACtF,wEAAwE;QACxE,MAAM,MAAM,GAAG,IAAI,CAAC,IAAI,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,MAAM,CAAC;QAC9C,KAAK,CAAC,IAAI,CACR,IAAI,CAAC,iBAAiB,CAAC,MAAM,GAAG,CAAC;YAC/B,CAAC,CAAC,0BAA0B,MAAM,gBAAgB,MAAM,4BAA4B;gBAClF,uDAAuD;YACzD,CAAC,CAAC,uBAAuB,MAAM,2CAA2C,MAAM,GAAG;gBACjF,yDAAyD,CAC9D,CAAC;QACF,OAAO,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;IAC1B,CAAC;IAED,uFAAuF;IACvF,yFAAyF;IACzF,MAAM,WAAW,GAAG,IAAI,CAAC,IAAI,CAAC;IAC9B,KAAK,CAAC,IAAI,CACR,eAAe,IAAI,CAAC,QAAQ,CAAC,IAAI,CAAC,cAAc,CAAC,OAAO,CAAC,iBAAiB;QACxE,GAAG,WAAW,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAK,CAAC,GAAG,WAAW,CAAC,CAAC,CAAC,qBAAqB,CAAC,CAAC,CAAC,EAAE,GAAG,CACpF,CAAC;IAEF,OAAO,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;AAC1B,CAAC;AAED;;;;;;;;;;;;;;;;;;GAkBG;AACH,MAAM,UAAU,QAAQ,CAAC,IAAa,EAAE,IAAoB,EAAE,SAAwB,CAAC;IACrF,MAAM,EAAE,MAAM,EAAE,GAAG,IAAI,CAAC;IACxB,MAAM,OAAO,GAAG,IAAI,GAAG,EAAkB,CAAC;IAC1C,KAAK,MAAM,KAAK,IAAI,IAAI,CAAC,MAAM,EAAE,CAAC;QAChC,KAAK,MAAM,OAAO,IAAI,KAAK,CAAC,QAAQ;YAAE,OAAO,CAAC,GAAG,CAAC,OAAO,CAAC,MAAM,CAAC,KAAK,EAAE,KAAK,CAAC,QAAQ,CAAC,CAAC;IAC1F,CAAC;IAED,OAAO,IAAI,CAAC,SAAS,CACnB;QACE,IAAI,EAAE,IAAI,CAAC,IAAI;QACf,KAAK,EAAE,IAAI,CAAC,QAAQ;QACpB,MAAM,EAAE,cAAc,CAAC,MAAM,CAAC;QAC9B,oBAAoB,EAAE,eAAe,CAAC,MAAM,CAAC,aAAa,CAAC;QAC3D,cAAc,EAAE,MAAM,CAAC,YAAY;QACnC,cAAc,EAAE,MAAM,CAAC,YAAY;QACnC,UAAU,EAAE,MAAM,CAAC,SAAS;QAC5B,YAAY,EAAE,MAAM,CAAC,WAAW;QAChC,YAAY,EAAE,IAAI,CAAC,WAAW;QAC9B,qBAAqB,EAAE,MAAM,CAAC,mBAAmB;QACjD,uBAAuB,EAAE,MAAM,CAAC,cAAc;QAC9C,gBAAgB,EAAE,IAAI,CAAC,eAAe;QACtC,oFAAoF;QACpF,iBAAiB,EAAE,IAAI,CAAC,KAAK,CAAC,mBAAmB,GAAG,IAAI,CAAC,KAAK,CAAC,qBAAqB;QACpF,mBAAmB,EAAE,IAAI,CAAC,iBAAiB,CAAC,MAAM;QAClD,QAAQ,EAAE,IAAI,CAAC,WAAW,CAAC,GAAG,CAAC,CAAC,MAAM,EAAE,EAAE,CAAC,CAAC;YAC1C,YAAY,EAAE,MAAM,CAAC,KAAK;YAC1B,MAAM,EAAE,IAAI,CAAC,WAAW,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,EAAE;YAChD,KAAK,EAAE,MAAM,CAAC,KAAK;YACnB,IAAI,EAAE,MAAM,CAAC,iBAAiB;YAC9B,gBAAgB,EAAE,MAAM,CAAC,YAAY;YACrC,kBAAkB,EAAE,MAAM,CAAC,gBAAgB;YAC3C,YAAY,EAAE,MAAM,CAAC,WAAW;YAChC,YAAY,EAAE,MAAM,CAAC,WAAW;YAChC,WAAW,EAAE,MAAM,CAAC,UAAU;YAC9B,WAAW,EAAE,MAAM,CAAC,UAAU;YAC9B,UAAU,EAAE,MAAM,CAAC,UAAU;YAC7B,YAAY,EAAE,MAAM,CAAC,YAAY;YACjC,WAAW,EAAE,OAAO,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,IAAI;SAC/C,CAAC,CAAC;QACH,QAAQ,EAAE;YACR,IAAI,EAAE,IAAI,CAAC,QAAQ,CAAC,IAAI;YACxB,iFAAiF;YACjF,KAAK,EAAE,IAAI,CAAC,QAAQ,CAAC,KAAK;YAC1B,yBAAyB,EAAE,IAAI,CAAC,QAAQ,CAAC,uBAAuB;SACjE;QACD,oFAAoF;QACpF,sFAAsF;QACtF,iFAAiF;QACjF,uFAAuF;QACvF,QAAQ,EAAE,IAAI,CAAC,WAAW;aACvB,MAAM,CAAC,sBAAsB,CAAC,IAAI,CAAC,WAAW,CAAC,CAAC;aAChD,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,EAAE,IAAI,EAAE,CAAC,CAAC,IAAI,EAAE,QAAQ,EAAE,CAAC,CAAC,QAAQ,EAAE,OAAO,EAAE,CAAC,CAAC,OAAO,EAAE,CAAC,CAAC;KAC5E,EACD,IAAI,EACJ,MAAM,IAAI,SAAS,CACpB,CAAC;AACJ,CAAC;AAED,mEAAmE;AACnE,MAAM,UAAU,iBAAiB,CAAC,WAAkC;IAClE,OAAO,WAAW;SACf,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE;QACT,+EAA+E;QAC/E,sCAAsC;QACtC,MAAM,IAAI,GAAG,GAAG,CAAC,CAAC,QAAQ,KAAK,SAAS,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,MAAM,KAAK,SAAS,CAAC,CAAC,CAAC,OAAO,CAAC,EAAE,CAAC;QACzF,OAAO,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,GAAG,IAAI,cAAc,SAAS,CAAC,CAAC,CAAC,IAAI,CAAC,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC;IAClE,CAAC,CAAC;SACD,IAAI,CAAC,IAAI,CAAC,CAAC;AAChB,CAAC;AAED,MAAM,UAAU,aAAa,CAAC,MAAqB;IACjD,MAAM,KAAK,GAAa,EAAE,CAAC;IAC3B,MAAM,IAAI,GAAe,EAAE,CAAC;IAC5B,KAAK,MAAM,IAAI,IAAI,MAAM,CAAC,KAAK,EAAE,CAAC;QAChC,qFAAqF;QACrF,+EAA+E;QAC/E,IAAI,CAAC,IAAI,CAAC;YACR,KAAK,IAAI,CAAC,IAAI,EAAE;YAChB,IAAI,CAAC,IAAI,CAAC,cAAc,CAAC,OAAO,CAAC;YACjC,gBAAgB,CAAC,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE;SAC/C,CAAC,CAAC;IACL,CAAC;IACD,KAAK,CAAC,IAAI,CAAC,SAAS,MAAM,CAAC,SAAS,EAAE,CAAC,CAAC;IACxC,KAAK,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,EAAE,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACtC,KAAK,CAAC,IAAI,CAAC,WAAW,CAAC,MAAM,CAAC,SAAS,GAAG,IAAI,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;IAChE,OAAO,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;AAC1B,CAAC;AAED,MAAM,UAAU,WAAW,CAAC,MAAqB,EAAE,SAAwB,CAAC;IAC1E,OAAO,IAAI,CAAC,SAAS,CACnB;QACE,UAAU,EAAE,MAAM,CAAC,SAAS;QAC5B,KAAK,EAAE,MAAM,CAAC,KAAK;QACnB,WAAW,EAAE,MAAM,CAAC,eAAe;QACnC,gBAAgB,EAAE,MAAM,CAAC,IAAI,CAAC,eAAe;QAC7C,OAAO,EAAE,MAAM,CAAC,IAAI,CAAC,WAAW;QAChC,UAAU,EAAE,MAAM,CAAC,SAAS;QAC5B,QAAQ,EAAE,MAAM,CAAC,WAAW,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,EAAE,IAAI,EAAE,CAAC,CAAC,IAAI,EAAE,QAAQ,EAAE,CAAC,CAAC,QAAQ,EAAE,OAAO,EAAE,CAAC,CAAC,OAAO,EAAE,CAAC,CAAC;KACtG,EACD,IAAI,EACJ,MAAM,IAAI,SAAS,CACpB,CAAC;AACJ,CAAC","sourcesContent":["/**\n * Human-readable output for the terminal.\n *\n * Everything here is plain text with no colour codes, so piping to a file or a log\n * produces exactly what appeared on screen.\n */\n\nimport type { Diagnostic } from '../edf/errors.js';\nimport type { EdfFile } from '../edf/reader.js';\nimport { describeFormat, formatRates, formatWallClock } from '../edf/header.js';\nimport { formatBytes, formatDuration } from '../format/number.js';\nimport type { ConversionPlan } from '../convert/plan.js';\nimport { withoutFileRateWarning } from '../convert/plan.js';\nimport type { ConvertResult } from '../convert/run.js';\n\nfunction table(rows: readonly (readonly string[])[], alignRight: ReadonlySet<number>): string {\n  if (rows.length === 0) return '';\n  const width: number[] = [];\n  for (const row of rows) {\n    row.forEach((cell, i) => {\n      width[i] = Math.max(width[i] ?? 0, cell.length);\n    });\n  }\n  return rows\n    .map((row) =>\n      row\n        .map((cell, i) => {\n          const w = width[i] ?? 0;\n          return alignRight.has(i) ? cell.padStart(w) : cell.padEnd(w);\n        })\n        .join('  ')\n        .trimEnd(),\n    )\n    .join('\\n');\n}\n\n/**\n * Make header text safe to print to a terminal.\n *\n * EDF identification fields and channel labels are free text copied verbatim out of the\n * file, and `--info` puts them straight on stdout. A header carrying ANSI escapes could\n * therefore drive the reader's terminal — `\\x1b[2J\\x1b[H` clears the screen and homes the\n * cursor, which is enough to hide the rest of the output or repaint it as something else.\n * Nobody writes an EDF header that way on purpose, which is exactly why a file that does\n * should not be trusted with the terminal.\n *\n * Control bytes are shown as their escape instead, so a corrupt field stays diagnosable\n * rather than being silently swallowed. This affects display only: `channels.csv` and\n * `metadata.json` still copy the field verbatim, and CSV quoting already makes that safe.\n */\nexport function printable(text: string): string {\n  // eslint-disable-next-line no-control-regex\n  return text.replace(/[\\u0000-\\u001f\\u007f-\\u009f]/gu, (c) =>\n    `\\\\x${c.codePointAt(0)!.toString(16).padStart(2, '0')}`,\n  );\n}\n\n/**\n * The same protection for text that is meant to span lines.\n *\n * `printable` escapes newlines along with everything else, which is right for a channel\n * label — one has no business containing a line break, and it would break the `--info`\n * table's alignment. It is wrong for a whole message: several are written on two lines,\n * and Node's own option errors run to three. Escaping those turned the break into text:\n *\n *     error: No channel named \"ECQ\". Did you mean \"ECG\"?\\x0aRun with --info to list ...\n *\n * Each line is escaped on its own, so nothing here gains the ability to drive a terminal.\n * A carriage return is still escaped, so no line can be repainted after it is printed —\n * which is the property that mattered. A newline can only add a line, never overwrite one.\n */\nexport function printableLines(text: string, indent = ''): string {\n  return text\n    .split('\\n')\n    .map((line, index) => (index === 0 ? '' : indent) + printable(line))\n    .join('\\n');\n}\n\n/** The `--info` view: what is in this recording, and what would converting it produce. */\nexport function formatInfo(file: EdfFile, plan: ConversionPlan): string {\n  const { header } = file;\n  const lines: string[] = [];\n\n  lines.push(`File       ${file.path}`);\n  lines.push(`Format     ${describeFormat(header)}`);\n  lines.push(\n    `Recorded   ${\n      formatWallClock(header.startDateTime)?.replace('T', ' ') ??\n      `${printable(header.startDateRaw)} ${printable(header.startTimeRaw)} (unparseable)`\n    }`,\n  );\n  lines.push(\n    `Duration   ${formatDuration(file.durationSeconds)}  (${file.recordCount} records of ${header.recordDuration}s)`,\n  );\n  const elapsedSpan = plan.range.recordingEndSeconds - plan.range.recordingStartSeconds;\n  if (Math.abs(elapsedSpan - file.durationSeconds) > 1e-9) {\n    lines.push(`Time span  ${formatDuration(elapsedSpan)}  (includes discontinuities)`);\n  }\n  lines.push(`Size       ${formatBytes(file.fileSize)}`);\n  if (header.patientId) lines.push(`Patient    ${printable(header.patientId)}`);\n  if (header.recordingId) lines.push(`Recording  ${printable(header.recordingId)}`);\n\n  const signals = file.dataSignals;\n  lines.push('');\n  // The signal count was pluralised but the annotation-channel count was not, so a file\n  // carrying two of them read \"2 annotation channel\". EDF+ permits more than one.\n  const annotationCount = file.annotationSignals.length;\n  const annotationPart =\n    annotationCount > 0\n      ? ` + ${annotationCount} annotation channel${annotationCount === 1 ? '' : 's'}`\n      : '';\n  lines.push(\n    `Channels   ${signals.length} signal${signals.length === 1 ? '' : 's'}${annotationPart}`,\n  );\n  lines.push('');\n\n  const rows: string[][] = [['#', 'COLUMN', 'LABEL', 'UNIT', 'RATE', 'RANGE', 'OUTPUT']];\n  const fileFor = new Map<number, string>();\n  for (const group of plan.groups) {\n    for (const channel of group.channels) fileFor.set(channel.signal.index, group.fileName);\n  }\n  // Rendered as a group so that two channels recorded at different rates never show the\n  // same figure in the RATE column, which is the one thing this table is asked to settle.\n  const rateText = formatRates(signals.map((signal) => signal.samplingRate));\n  for (const [row, signal] of signals.entries()) {\n    rows.push([\n      String(signal.index),\n      printable(plan.columnNames.get(signal.index) ?? ''),\n      printable(signal.label),\n      printable(signal.physicalDimension),\n      `${rateText[row]} Hz`,\n      `${signal.physicalMin} to ${signal.physicalMax}`,\n      /*\n        A channel with no samples was reported as \"(not selected)\", which is a different\n        thing and not true when it was named on --channels. `edf2csv rec.edf --info\n        --channels unused` said the channel the command asked for had not been chosen, when\n        what is actually the case is that the file gives it nothing to convert. The\n        NO_SAMPLES warning below the table says so; the table contradicted it.\n      */\n      fileFor.get(signal.index) ??\n        (signal.samplesPerRecord === 0 ? '(no samples)' : '(not selected)'),\n    ]);\n  }\n  lines.push(table(rows, new Set([0])));\n\n  lines.push('');\n  if (plan.groups.length > 1) {\n    lines.push(\n      plan.layout === 'long'\n        ? `Sampling rates differ, and the long layout puts them in one table anyway: each row ` +\n          `carries its own time, so nothing has to line up. No channel is resampled.`\n        : `Sampling rates differ, so channels are written to ${plan.groups.length} files, one per rate. ` +\n          `No channel is resampled.`,\n    );\n  }\n  /*\n    The estimate describes the signal tables, and says so when that is not what will be\n    written.\n\n    Under --annotations-only there are no signal tables, and the line read \"Would write 0\n    rows, roughly 0 B.\" for a conversion that goes on to write annotations.csv with three\n    events in it. --info exists to say what a conversion will do; asserting it will write\n    nothing, when it will write a file, is the one thing it must not do.\n\n    How many events there are cannot be answered from the header — the annotation channel has\n    to be read record by record, which is the scan --info is for avoiding. So it says which\n    file, and that the count is not knowable this cheaply, rather than inventing a zero.\n  */\n  /*\n    No signal table to describe, whichever way that came about.\n\n    This asked only whether `--annotations-only` had been given. A recording that has no\n    signal channels — one holding nothing but EDF+ annotations — has none either, and fell\n    through to the estimate line: \"Would write 0 rows, roughly 0 B.\" for a conversion that\n    goes on to write an annotations.csv with events in it, beside channels.csv and\n    metadata.json. That is the sentence 0.4.51 removed, arriving by the other route.\n  */\n  if (!plan.writeSignals || plan.groups.length === 0) {\n    // Named as they will be written. --info is read to find out what a run leaves behind,\n    // and a script that opens the name it was given must find a file there.\n    const suffix = plan.gzip ? '.csv.gz' : '.csv';\n    lines.push(\n      file.annotationSignals.length > 0\n        ? `Would write annotations${suffix} and channels${suffix}, and no signal data. How ` +\n          'many events there are cannot be told from the header.'\n        : `Would write channels${suffix} and no signal data — and no annotations${suffix} ` +\n          'either, since this recording has no annotation channel.',\n    );\n    return lines.join('\\n');\n  }\n\n  // The estimate counts the characters of the CSV, which is what --gzip then compresses.\n  // Reporting it as the size on disk would overstate a compressed conversion several-fold.\n  const compressing = plan.gzip;\n  lines.push(\n    `Would write ${plan.estimate.rows.toLocaleString('en-US')} rows, roughly ` +\n      `${formatBytes(plan.estimate.bytes)}${compressing ? ' before compression' : ''}.`,\n  );\n\n  return lines.join('\\n');\n}\n\n/**\n * The `--info` view as JSON, for surveying files from a script.\n *\n * `indent` is 2 for a single recording, matching what this has always printed, and null for\n * a batch — several pretty-printed documents run together are readable by a streaming parser\n * but not by anything that expects one record per line, and a batch is exactly where\n * line-oriented reading is wanted. null rather than undefined because a default parameter\n * takes effect when undefined is passed, which quietly restored the indentation this was\n * meant to drop; JSON.stringify itself wants undefined, so it is translated at the call.\n *\n * `--info` answers \"what is in this recording and what would converting it cost\", which\n * is exactly the question you want to ask across a directory of hundreds of recordings —\n * and the text table is the wrong shape for that. `--json` previously applied only to\n * conversions, so scripts had to parse the aligned columns or convert files just to learn\n * what was in them.\n *\n * Field names match `metadata.json` where the two describe the same thing, so a survey and\n * a conversion can be read by the same code.\n */\nexport function infoJson(file: EdfFile, plan: ConversionPlan, indent: number | null = 2): string {\n  const { header } = file;\n  const fileFor = new Map<number, string>();\n  for (const group of plan.groups) {\n    for (const channel of group.channels) fileFor.set(channel.signal.index, group.fileName);\n  }\n\n  return JSON.stringify(\n    {\n      path: file.path,\n      bytes: file.fileSize,\n      format: describeFormat(header),\n      start_datetime_local: formatWallClock(header.startDateTime),\n      start_date_raw: header.startDateRaw,\n      start_time_raw: header.startTimeRaw,\n      patient_id: header.patientId,\n      recording_id: header.recordingId,\n      data_records: file.recordCount,\n      data_records_declared: header.declaredRecordCount,\n      record_duration_seconds: header.recordDuration,\n      duration_seconds: file.durationSeconds,\n      // For a discontinuous file this exceeds duration_seconds by the length of the gaps.\n      time_span_seconds: plan.range.recordingEndSeconds - plan.range.recordingStartSeconds,\n      annotation_channels: file.annotationSignals.length,\n      channels: file.dataSignals.map((signal) => ({\n        signal_index: signal.index,\n        column: plan.columnNames.get(signal.index) ?? '',\n        label: signal.label,\n        unit: signal.physicalDimension,\n        sampling_rate_hz: signal.samplingRate,\n        samples_per_record: signal.samplesPerRecord,\n        physical_min: signal.physicalMin,\n        physical_max: signal.physicalMax,\n        digital_min: signal.digitalMin,\n        digital_max: signal.digitalMax,\n        transducer: signal.transducer,\n        prefiltering: signal.prefiltering,\n        output_file: fileFor.get(signal.index) ?? null,\n      })),\n      estimate: {\n        rows: plan.estimate.rows,\n        // Character count of the CSV. With --gzip the file on disk is smaller than this.\n        bytes: plan.estimate.bytes,\n        exceeds_spreadsheet_limit: plan.estimate.exceedsSpreadsheetLimit,\n      },\n      // The plan's mixed-rate warning replaces the header parser's, as it does everywhere\n      // else. This was the one consumer left out of that when 0.3.2 made the warning follow\n      // --channels, so `--info --json` carried it twice: once counting the rates being\n      // converted and once counting every rate in the file, with the same code and severity.\n      warnings: plan.diagnostics\n        .concat(withoutFileRateWarning(file.diagnostics))\n        .map((d) => ({ code: d.code, severity: d.severity, message: d.message })),\n    },\n    null,\n    indent ?? undefined,\n  );\n}\n\n/** One line per diagnostic, prefixed so warnings are greppable. */\nexport function formatDiagnostics(diagnostics: readonly Diagnostic[]): string {\n  return diagnostics\n    .map((d) => {\n      // Diagnostics quote channel labels, which come from the file, so they need the\n      // same treatment as the --info table.\n      const head = `${d.severity === 'warning' ? 'warning' : 'note'}: ${printable(d.message)}`;\n      return d.hint ? `${head}\\n         ${printable(d.hint)}` : head;\n    })\n    .join('\\n');\n}\n\nexport function formatSummary(result: ConvertResult): string {\n  const lines: string[] = [];\n  const rows: string[][] = [];\n  for (const file of result.files) {\n    // `.csv.gz` is still a CSV, and its rows are still rows. The suffix test dropped the\n    // unit from every line of a --gzip summary, so the numbers stood on their own.\n    rows.push([\n      `  ${file.name}`,\n      file.rows.toLocaleString('en-US'),\n      /\\.csv(\\.gz)?$/u.test(file.name) ? 'rows' : '',\n    ]);\n  }\n  lines.push(`Wrote ${result.outputDir}`);\n  lines.push(table(rows, new Set([1])));\n  lines.push(`Done in ${(result.elapsedMs / 1000).toFixed(1)}s.`);\n  return lines.join('\\n');\n}\n\nexport function summaryJson(result: ConvertResult, indent: number | null = 2): string {\n  return JSON.stringify(\n    {\n      output_dir: result.outputDir,\n      files: result.files,\n      annotations: result.annotationCount,\n      duration_seconds: result.file.durationSeconds,\n      records: result.file.recordCount,\n      elapsed_ms: result.elapsedMs,\n      warnings: result.diagnostics.map((d) => ({ code: d.code, severity: d.severity, message: d.message })),\n    },\n    null,\n    indent ?? undefined,\n  );\n}\n"]}
+{"version":3,"file":"report.js","sourceRoot":"","sources":["../../src/cli/report.ts"],"names":[],"mappings":"AAAA;;;;;GAKG;AAIH,OAAO,EAAE,cAAc,EAAE,WAAW,EAAE,eAAe,EAAE,MAAM,kBAAkB,CAAC;AAChF,OAAO,EAAE,WAAW,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AAElE,OAAO,EAAE,sBAAsB,EAAE,MAAM,oBAAoB,CAAC;AAG5D,SAAS,KAAK,CAAC,IAAoC,EAAE,UAA+B;IAClF,IAAI,IAAI,CAAC,MAAM,KAAK,CAAC;QAAE,OAAO,EAAE,CAAC;IACjC,MAAM,KAAK,GAAa,EAAE,CAAC;IAC3B,KAAK,MAAM,GAAG,IAAI,IAAI,EAAE,CAAC;QACvB,GAAG,CAAC,OAAO,CAAC,CAAC,IAAI,EAAE,CAAC,EAAE,EAAE;YACtB,KAAK,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC,CAAC,IAAI,CAAC,EAAE,IAAI,CAAC,MAAM,CAAC,CAAC;QAClD,CAAC,CAAC,CAAC;IACL,CAAC;IACD,OAAO,IAAI;SACR,GAAG,CAAC,CAAC,GAAG,EAAE,EAAE,CACX,GAAG;SACA,GAAG,CAAC,CAAC,IAAI,EAAE,CAAC,EAAE,EAAE;QACf,MAAM,CAAC,GAAG,KAAK,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;QACxB,OAAO,UAAU,CAAC,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,QAAQ,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC;IAC/D,CAAC,CAAC;SACD,IAAI,CAAC,IAAI,CAAC;SACV,OAAO,EAAE,CACb;SACA,IAAI,CAAC,IAAI,CAAC,CAAC;AAChB,CAAC;AAED;;;;;;;;;;;;;GAaG;AACH,MAAM,UAAU,SAAS,CAAC,IAAY;IACpC,4CAA4C;IAC5C,OAAO,IAAI,CAAC,OAAO,CAAC,gCAAgC,EAAE,CAAC,CAAC,EAAE,EAAE,CAC1D,MAAM,CAAC,CAAC,WAAW,CAAC,CAAC,CAAE,CAAC,QAAQ,CAAC,EAAE,CAAC,CAAC,QAAQ,CAAC,CAAC,EAAE,GAAG,CAAC,EAAE,CACxD,CAAC;AACJ,CAAC;AAED;;;;;;;;;;;;;GAaG;AACH,MAAM,UAAU,cAAc,CAAC,IAAY,EAAE,MAAM,GAAG,EAAE;IACtD,OAAO,IAAI;SACR,KAAK,CAAC,IAAI,CAAC;SACX,GAAG,CAAC,CAAC,IAAI,EAAE,KAAK,EAAE,EAAE,CAAC,CAAC,KAAK,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,GAAG,SAAS,CAAC,IAAI,CAAC,CAAC;SACnE,IAAI,CAAC,IAAI,CAAC,CAAC;AAChB,CAAC;AAED,0FAA0F;AAC1F,MAAM,UAAU,UAAU,CAAC,IAAa,EAAE,IAAoB;IAC5D,MAAM,EAAE,MAAM,EAAE,GAAG,IAAI,CAAC;IACxB,MAAM,KAAK,GAAa,EAAE,CAAC;IAE3B,KAAK,CAAC,IAAI,CAAC,cAAc,IAAI,CAAC,IAAI,EAAE,CAAC,CAAC;IACtC,KAAK,CAAC,IAAI,CAAC,cAAc,cAAc,CAAC,MAAM,CAAC,EAAE,CAAC,CAAC;IACnD,KAAK,CAAC,IAAI,CACR,cACE,eAAe,CAAC,MAAM,CAAC,aAAa,CAAC,EAAE,OAAO,CAAC,GAAG,EAAE,GAAG,CAAC;QACxD,GAAG,SAAS,CAAC,MAAM,CAAC,YAAY,CAAC,IAAI,SAAS,CAAC,MAAM,CAAC,YAAY,CAAC,gBACrE,EAAE,CACH,CAAC;IACF,KAAK,CAAC,IAAI,CACR,cAAc,cAAc,CAAC,IAAI,CAAC,eAAe,CAAC,MAAM,IAAI,CAAC,WAAW,eAAe,MAAM,CAAC,cAAc,IAAI,CACjH,CAAC;IACF,MAAM,WAAW,GAAG,IAAI,CAAC,KAAK,CAAC,mBAAmB,GAAG,IAAI,CAAC,KAAK,CAAC,qBAAqB,CAAC;IACtF,IAAI,IAAI,CAAC,GAAG,CAAC,WAAW,GAAG,IAAI,CAAC,eAAe,CAAC,GAAG,IAAI,EAAE,CAAC;QACxD,KAAK,CAAC,IAAI,CAAC,cAAc,cAAc,CAAC,WAAW,CAAC,8BAA8B,CAAC,CAAC;IACtF,CAAC;IACD;;;;;;;;;;;MAWE;IACF,MAAM,QAAQ,GAAG,IAAI,CAAC,KAAK,CAAC,qBAAqB,CAAC;IAClD,IAAI,MAAM,CAAC,QAAQ,CAAC,QAAQ,CAAC,IAAI,IAAI,CAAC,GAAG,CAAC,QAAQ,CAAC,GAAG,IAAI,EAAE,CAAC;QAC3D,oFAAoF;QACpF,qFAAqF;QACrF,2EAA2E;QAC3E,KAAK,CAAC,IAAI,CACR,cAAc,QAAQ,CAAC,OAAO,CAAC,CAAC,CAAC,qDAAqD,CACvF,CAAC;IACJ,CAAC;IACD,KAAK,CAAC,IAAI,CAAC,cAAc,WAAW,CAAC,IAAI,CAAC,QAAQ,CAAC,EAAE,CAAC,CAAC;IACvD,IAAI,MAAM,CAAC,SAAS;QAAE,KAAK,CAAC,IAAI,CAAC,cAAc,SAAS,CAAC,MAAM,CAAC,SAAS,CAAC,EAAE,CAAC,CAAC;IAC9E,IAAI,MAAM,CAAC,WAAW;QAAE,KAAK,CAAC,IAAI,CAAC,cAAc,SAAS,CAAC,MAAM,CAAC,WAAW,CAAC,EAAE,CAAC,CAAC;IAElF,MAAM,OAAO,GAAG,IAAI,CAAC,WAAW,CAAC;IACjC,KAAK,CAAC,IAAI,CAAC,EAAE,CAAC,CAAC;IACf,sFAAsF;IACtF,gFAAgF;IAChF,MAAM,eAAe,GAAG,IAAI,CAAC,iBAAiB,CAAC,MAAM,CAAC;IACtD,MAAM,cAAc,GAClB,eAAe,GAAG,CAAC;QACjB,CAAC,CAAC,MAAM,eAAe,sBAAsB,eAAe,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,EAAE;QAC/E,CAAC,CAAC,EAAE,CAAC;IACT,KAAK,CAAC,IAAI,CACR,cAAc,OAAO,CAAC,MAAM,UAAU,OAAO,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,GAAG,GAAG,cAAc,EAAE,CACzF,CAAC;IACF,KAAK,CAAC,IAAI,CAAC,EAAE,CAAC,CAAC;IAEf,MAAM,IAAI,GAAe,CAAC,CAAC,GAAG,EAAE,QAAQ,EAAE,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,OAAO,EAAE,QAAQ,CAAC,CAAC,CAAC;IACvF,MAAM,OAAO,GAAG,IAAI,GAAG,EAAkB,CAAC;IAC1C,KAAK,MAAM,KAAK,IAAI,IAAI,CAAC,MAAM,EAAE,CAAC;QAChC,KAAK,MAAM,OAAO,IAAI,KAAK,CAAC,QAAQ;YAAE,OAAO,CAAC,GAAG,CAAC,OAAO,CAAC,MAAM,CAAC,KAAK,EAAE,KAAK,CAAC,QAAQ,CAAC,CAAC;IAC1F,CAAC;IACD,sFAAsF;IACtF,wFAAwF;IACxF,MAAM,QAAQ,GAAG,WAAW,CAAC,OAAO,CAAC,GAAG,CAAC,CAAC,MAAM,EAAE,EAAE,CAAC,MAAM,CAAC,YAAY,CAAC,CAAC,CAAC;IAC3E,KAAK,MAAM,CAAC,GAAG,EAAE,MAAM,CAAC,IAAI,OAAO,CAAC,OAAO,EAAE,EAAE,CAAC;QAC9C,IAAI,CAAC,IAAI,CAAC;YACR,MAAM,CAAC,MAAM,CAAC,KAAK,CAAC;YACpB,SAAS,CAAC,IAAI,CAAC,WAAW,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,EAAE,CAAC;YACnD,SAAS,CAAC,MAAM,CAAC,KAAK,CAAC;YACvB,SAAS,CAAC,MAAM,CAAC,iBAAiB,CAAC;YACnC,GAAG,QAAQ,CAAC,GAAG,CAAC,KAAK;YACrB,GAAG,MAAM,CAAC,WAAW,OAAO,MAAM,CAAC,WAAW,EAAE;YAChD;;;;;;cAME;YACF,OAAO,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC;gBACvB,CAAC,MAAM,CAAC,gBAAgB,KAAK,CAAC,CAAC,CAAC,CAAC,cAAc,CAAC,CAAC,CAAC,gBAAgB,CAAC;SACtE,CAAC,CAAC;IACL,CAAC;IACD,KAAK,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,EAAE,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAEtC,KAAK,CAAC,IAAI,CAAC,EAAE,CAAC,CAAC;IACf,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QAC3B,KAAK,CAAC,IAAI,CACR,IAAI,CAAC,MAAM,KAAK,MAAM;YACpB,CAAC,CAAC,qFAAqF;gBACrF,2EAA2E;YAC7E,CAAC,CAAC,qDAAqD,IAAI,CAAC,MAAM,CAAC,MAAM,wBAAwB;gBAC/F,0BAA0B,CAC/B,CAAC;IACJ,CAAC;IACD;;;;;;;;;;;;MAYE;IACF;;;;;;;;MAQE;IACF,IAAI,CAAC,IAAI,CAAC,YAAY,IAAI,IAAI,CAAC,MAAM,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QACnD,sFAAsF;QACtF,wEAAwE;QACxE,MAAM,MAAM,GAAG,IAAI,CAAC,IAAI,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,MAAM,CAAC;QAC9C,KAAK,CAAC,IAAI,CACR,IAAI,CAAC,iBAAiB,CAAC,MAAM,GAAG,CAAC;YAC/B,CAAC,CAAC,0BAA0B,MAAM,gBAAgB,MAAM,4BAA4B;gBAClF,uDAAuD;YACzD,CAAC,CAAC,uBAAuB,MAAM,2CAA2C,MAAM,GAAG;gBACjF,yDAAyD,CAC9D,CAAC;QACF,OAAO,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;IAC1B,CAAC;IAED,uFAAuF;IACvF,yFAAyF;IACzF,MAAM,WAAW,GAAG,IAAI,CAAC,IAAI,CAAC;IAC9B,KAAK,CAAC,IAAI,CACR,eAAe,IAAI,CAAC,QAAQ,CAAC,IAAI,CAAC,cAAc,CAAC,OAAO,CAAC,iBAAiB;QACxE,GAAG,WAAW,CAAC,IAAI,CAAC,QAAQ,CAAC,KAAK,CAAC,GAAG,WAAW,CAAC,CAAC,CAAC,qBAAqB,CAAC,CAAC,CAAC,EAAE,GAAG,CACpF,CAAC;IAEF,OAAO,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;AAC1B,CAAC;AAED;;;;;;;;;;;;;;;;;;GAkBG;AACH,MAAM,UAAU,QAAQ,CAAC,IAAa,EAAE,IAAoB,EAAE,SAAwB,CAAC;IACrF,MAAM,EAAE,MAAM,EAAE,GAAG,IAAI,CAAC;IACxB,MAAM,OAAO,GAAG,IAAI,GAAG,EAAkB,CAAC;IAC1C,KAAK,MAAM,KAAK,IAAI,IAAI,CAAC,MAAM,EAAE,CAAC;QAChC,KAAK,MAAM,OAAO,IAAI,KAAK,CAAC,QAAQ;YAAE,OAAO,CAAC,GAAG,CAAC,OAAO,CAAC,MAAM,CAAC,KAAK,EAAE,KAAK,CAAC,QAAQ,CAAC,CAAC;IAC1F,CAAC;IAED,OAAO,IAAI,CAAC,SAAS,CACnB;QACE,IAAI,EAAE,IAAI,CAAC,IAAI;QACf,KAAK,EAAE,IAAI,CAAC,QAAQ;QACpB,MAAM,EAAE,cAAc,CAAC,MAAM,CAAC;QAC9B,oBAAoB,EAAE,eAAe,CAAC,MAAM,CAAC,aAAa,CAAC;QAC3D,cAAc,EAAE,MAAM,CAAC,YAAY;QACnC,cAAc,EAAE,MAAM,CAAC,YAAY;QACnC,UAAU,EAAE,MAAM,CAAC,SAAS;QAC5B,YAAY,EAAE,MAAM,CAAC,WAAW;QAChC,YAAY,EAAE,IAAI,CAAC,WAAW;QAC9B,qBAAqB,EAAE,MAAM,CAAC,mBAAmB;QACjD,uBAAuB,EAAE,MAAM,CAAC,cAAc;QAC9C,gBAAgB,EAAE,IAAI,CAAC,eAAe;QACtC,oFAAoF;QACpF,iBAAiB,EAAE,IAAI,CAAC,KAAK,CAAC,mBAAmB,GAAG,IAAI,CAAC,KAAK,CAAC,qBAAqB;QACpF,uFAAuF;QACvF,uFAAuF;QACvF,2EAA2E;QAC3E,oBAAoB,EAAE,IAAI,CAAC,KAAK,CAAC,qBAAqB;QACtD,mBAAmB,EAAE,IAAI,CAAC,iBAAiB,CAAC,MAAM;QAClD,QAAQ,EAAE,IAAI,CAAC,WAAW,CAAC,GAAG,CAAC,CAAC,MAAM,EAAE,EAAE,CAAC,CAAC;YAC1C,YAAY,EAAE,MAAM,CAAC,KAAK;YAC1B,MAAM,EAAE,IAAI,CAAC,WAAW,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,EAAE;YAChD,KAAK,EAAE,MAAM,CAAC,KAAK;YACnB,IAAI,EAAE,MAAM,CAAC,iBAAiB;YAC9B,gBAAgB,EAAE,MAAM,CAAC,YAAY;YACrC,kBAAkB,EAAE,MAAM,CAAC,gBAAgB;YAC3C,YAAY,EAAE,MAAM,CAAC,WAAW;YAChC,YAAY,EAAE,MAAM,CAAC,WAAW;YAChC,WAAW,EAAE,MAAM,CAAC,UAAU;YAC9B,WAAW,EAAE,MAAM,CAAC,UAAU;YAC9B,UAAU,EAAE,MAAM,CAAC,UAAU;YAC7B,YAAY,EAAE,MAAM,CAAC,YAAY;YACjC,WAAW,EAAE,OAAO,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,IAAI;SAC/C,CAAC,CAAC;QACH,QAAQ,EAAE;YACR,IAAI,EAAE,IAAI,CAAC,QAAQ,CAAC,IAAI;YACxB,iFAAiF;YACjF,KAAK,EAAE,IAAI,CAAC,QAAQ,CAAC,KAAK;YAC1B,yBAAyB,EAAE,IAAI,CAAC,QAAQ,CAAC,uBAAuB;SACjE;QACD,oFAAoF;QACpF,sFAAsF;QACtF,iFAAiF;QACjF,uFAAuF;QACvF,QAAQ,EAAE,IAAI,CAAC,WAAW;aACvB,MAAM,CAAC,sBAAsB,CAAC,IAAI,CAAC,WAAW,CAAC,CAAC;aAChD,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,EAAE,IAAI,EAAE,CAAC,CAAC,IAAI,EAAE,QAAQ,EAAE,CAAC,CAAC,QAAQ,EAAE,OAAO,EAAE,CAAC,CAAC,OAAO,EAAE,CAAC,CAAC;KAC5E,EACD,IAAI,EACJ,MAAM,IAAI,SAAS,CACpB,CAAC;AACJ,CAAC;AAED,mEAAmE;AACnE,MAAM,UAAU,iBAAiB,CAAC,WAAkC;IAClE,OAAO,WAAW;SACf,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE;QACT,+EAA+E;QAC/E,sCAAsC;QACtC,MAAM,IAAI,GAAG,GAAG,CAAC,CAAC,QAAQ,KAAK,SAAS,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,MAAM,KAAK,SAAS,CAAC,CAAC,CAAC,OAAO,CAAC,EAAE,CAAC;QACzF,OAAO,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,GAAG,IAAI,cAAc,SAAS,CAAC,CAAC,CAAC,IAAI,CAAC,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC;IAClE,CAAC,CAAC;SACD,IAAI,CAAC,IAAI,CAAC,CAAC;AAChB,CAAC;AAED,MAAM,UAAU,aAAa,CAAC,MAAqB;IACjD,MAAM,KAAK,GAAa,EAAE,CAAC;IAC3B,MAAM,IAAI,GAAe,EAAE,CAAC;IAC5B,KAAK,MAAM,IAAI,IAAI,MAAM,CAAC,KAAK,EAAE,CAAC;QAChC,qFAAqF;QACrF,+EAA+E;QAC/E,IAAI,CAAC,IAAI,CAAC;YACR,KAAK,IAAI,CAAC,IAAI,EAAE;YAChB,IAAI,CAAC,IAAI,CAAC,cAAc,CAAC,OAAO,CAAC;YACjC,gBAAgB,CAAC,IAAI,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE;SAC/C,CAAC,CAAC;IACL,CAAC;IACD,KAAK,CAAC,IAAI,CAAC,SAAS,MAAM,CAAC,SAAS,EAAE,CAAC,CAAC;IACxC,KAAK,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,EAAE,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IACtC,KAAK,CAAC,IAAI,CAAC,WAAW,CAAC,MAAM,CAAC,SAAS,GAAG,IAAI,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;IAChE,OAAO,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;AAC1B,CAAC;AAED,MAAM,UAAU,WAAW,CAAC,MAAqB,EAAE,SAAwB,CAAC;IAC1E,OAAO,IAAI,CAAC,SAAS,CACnB;QACE,UAAU,EAAE,MAAM,CAAC,SAAS;QAC5B,KAAK,EAAE,MAAM,CAAC,KAAK;QACnB,WAAW,EAAE,MAAM,CAAC,eAAe;QACnC,gBAAgB,EAAE,MAAM,CAAC,IAAI,CAAC,eAAe;QAC7C,OAAO,EAAE,MAAM,CAAC,IAAI,CAAC,WAAW;QAChC,UAAU,EAAE,MAAM,CAAC,SAAS;QAC5B,QAAQ,EAAE,MAAM,CAAC,WAAW,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,EAAE,IAAI,EAAE,CAAC,CAAC,IAAI,EAAE,QAAQ,EAAE,CAAC,CAAC,QAAQ,EAAE,OAAO,EAAE,CAAC,CAAC,OAAO,EAAE,CAAC,CAAC;KACtG,EACD,IAAI,EACJ,MAAM,IAAI,SAAS,CACpB,CAAC;AACJ,CAAC","sourcesContent":["/**\n * Human-readable output for the terminal.\n *\n * Everything here is plain text with no colour codes, so piping to a file or a log\n * produces exactly what appeared on screen.\n */\n\nimport type { Diagnostic } from '../edf/errors.js';\nimport type { EdfFile } from '../edf/reader.js';\nimport { describeFormat, formatRates, formatWallClock } from '../edf/header.js';\nimport { formatBytes, formatDuration } from '../format/number.js';\nimport type { ConversionPlan } from '../convert/plan.js';\nimport { withoutFileRateWarning } from '../convert/plan.js';\nimport type { ConvertResult } from '../convert/run.js';\n\nfunction table(rows: readonly (readonly string[])[], alignRight: ReadonlySet<number>): string {\n  if (rows.length === 0) return '';\n  const width: number[] = [];\n  for (const row of rows) {\n    row.forEach((cell, i) => {\n      width[i] = Math.max(width[i] ?? 0, cell.length);\n    });\n  }\n  return rows\n    .map((row) =>\n      row\n        .map((cell, i) => {\n          const w = width[i] ?? 0;\n          return alignRight.has(i) ? cell.padStart(w) : cell.padEnd(w);\n        })\n        .join('  ')\n        .trimEnd(),\n    )\n    .join('\\n');\n}\n\n/**\n * Make header text safe to print to a terminal.\n *\n * EDF identification fields and channel labels are free text copied verbatim out of the\n * file, and `--info` puts them straight on stdout. A header carrying ANSI escapes could\n * therefore drive the reader's terminal — `\\x1b[2J\\x1b[H` clears the screen and homes the\n * cursor, which is enough to hide the rest of the output or repaint it as something else.\n * Nobody writes an EDF header that way on purpose, which is exactly why a file that does\n * should not be trusted with the terminal.\n *\n * Control bytes are shown as their escape instead, so a corrupt field stays diagnosable\n * rather than being silently swallowed. This affects display only: `channels.csv` and\n * `metadata.json` still copy the field verbatim, and CSV quoting already makes that safe.\n */\nexport function printable(text: string): string {\n  // eslint-disable-next-line no-control-regex\n  return text.replace(/[\\u0000-\\u001f\\u007f-\\u009f]/gu, (c) =>\n    `\\\\x${c.codePointAt(0)!.toString(16).padStart(2, '0')}`,\n  );\n}\n\n/**\n * The same protection for text that is meant to span lines.\n *\n * `printable` escapes newlines along with everything else, which is right for a channel\n * label — one has no business containing a line break, and it would break the `--info`\n * table's alignment. It is wrong for a whole message: several are written on two lines,\n * and Node's own option errors run to three. Escaping those turned the break into text:\n *\n *     error: No channel named \"ECQ\". Did you mean \"ECG\"?\\x0aRun with --info to list ...\n *\n * Each line is escaped on its own, so nothing here gains the ability to drive a terminal.\n * A carriage return is still escaped, so no line can be repainted after it is printed —\n * which is the property that mattered. A newline can only add a line, never overwrite one.\n */\nexport function printableLines(text: string, indent = ''): string {\n  return text\n    .split('\\n')\n    .map((line, index) => (index === 0 ? '' : indent) + printable(line))\n    .join('\\n');\n}\n\n/** The `--info` view: what is in this recording, and what would converting it produce. */\nexport function formatInfo(file: EdfFile, plan: ConversionPlan): string {\n  const { header } = file;\n  const lines: string[] = [];\n\n  lines.push(`File       ${file.path}`);\n  lines.push(`Format     ${describeFormat(header)}`);\n  lines.push(\n    `Recorded   ${\n      formatWallClock(header.startDateTime)?.replace('T', ' ') ??\n      `${printable(header.startDateRaw)} ${printable(header.startTimeRaw)} (unparseable)`\n    }`,\n  );\n  lines.push(\n    `Duration   ${formatDuration(file.durationSeconds)}  (${file.recordCount} records of ${header.recordDuration}s)`,\n  );\n  const elapsedSpan = plan.range.recordingEndSeconds - plan.range.recordingStartSeconds;\n  if (Math.abs(elapsedSpan - file.durationSeconds) > 1e-9) {\n    lines.push(`Time span  ${formatDuration(elapsedSpan)}  (includes discontinuities)`);\n  }\n  /*\n    Where the samples begin, when that is not zero.\n\n    0.4.9 made the first record's timekeeping TAL the point a recording is timed from, so a\n    file whose TALs start at +1000 writes `time_s` from 1000.000 and takes `--start` and\n    `--end` on that same clock. None of that appeared here: the report said \"Duration 3s\",\n    which reads as 0 to 3, and `--start 0 --end 1` then selected nothing and answered with\n    \"The window is inside the recording but lands where there is no data ... Run with --info\n    to see where the records actually sit\" — pointing at this report, which was the one place\n    the number was missing. It is in `plan.range` already and governs the estimate printed\n    below; it was simply never shown.\n  */\n  const startsAt = plan.range.recordingStartSeconds;\n  if (Number.isFinite(startsAt) && Math.abs(startsAt) > 1e-9) {\n    // In seconds rather than through formatDuration, because this number is meant to be\n    // typed back in: `--start` takes `1000s`, and \"16m 40s\" is not something it accepts.\n    // It is also how the empty-window warning renders the window it was given.\n    lines.push(\n      `Timed from ${startsAt.toFixed(3)}s  (first sample; --start and --end use this clock)`,\n    );\n  }\n  lines.push(`Size       ${formatBytes(file.fileSize)}`);\n  if (header.patientId) lines.push(`Patient    ${printable(header.patientId)}`);\n  if (header.recordingId) lines.push(`Recording  ${printable(header.recordingId)}`);\n\n  const signals = file.dataSignals;\n  lines.push('');\n  // The signal count was pluralised but the annotation-channel count was not, so a file\n  // carrying two of them read \"2 annotation channel\". EDF+ permits more than one.\n  const annotationCount = file.annotationSignals.length;\n  const annotationPart =\n    annotationCount > 0\n      ? ` + ${annotationCount} annotation channel${annotationCount === 1 ? '' : 's'}`\n      : '';\n  lines.push(\n    `Channels   ${signals.length} signal${signals.length === 1 ? '' : 's'}${annotationPart}`,\n  );\n  lines.push('');\n\n  const rows: string[][] = [['#', 'COLUMN', 'LABEL', 'UNIT', 'RATE', 'RANGE', 'OUTPUT']];\n  const fileFor = new Map<number, string>();\n  for (const group of plan.groups) {\n    for (const channel of group.channels) fileFor.set(channel.signal.index, group.fileName);\n  }\n  // Rendered as a group so that two channels recorded at different rates never show the\n  // same figure in the RATE column, which is the one thing this table is asked to settle.\n  const rateText = formatRates(signals.map((signal) => signal.samplingRate));\n  for (const [row, signal] of signals.entries()) {\n    rows.push([\n      String(signal.index),\n      printable(plan.columnNames.get(signal.index) ?? ''),\n      printable(signal.label),\n      printable(signal.physicalDimension),\n      `${rateText[row]} Hz`,\n      `${signal.physicalMin} to ${signal.physicalMax}`,\n      /*\n        A channel with no samples was reported as \"(not selected)\", which is a different\n        thing and not true when it was named on --channels. `edf2csv rec.edf --info\n        --channels unused` said the channel the command asked for had not been chosen, when\n        what is actually the case is that the file gives it nothing to convert. The\n        NO_SAMPLES warning below the table says so; the table contradicted it.\n      */\n      fileFor.get(signal.index) ??\n        (signal.samplesPerRecord === 0 ? '(no samples)' : '(not selected)'),\n    ]);\n  }\n  lines.push(table(rows, new Set([0])));\n\n  lines.push('');\n  if (plan.groups.length > 1) {\n    lines.push(\n      plan.layout === 'long'\n        ? `Sampling rates differ, and the long layout puts them in one table anyway: each row ` +\n          `carries its own time, so nothing has to line up. No channel is resampled.`\n        : `Sampling rates differ, so channels are written to ${plan.groups.length} files, one per rate. ` +\n          `No channel is resampled.`,\n    );\n  }\n  /*\n    The estimate describes the signal tables, and says so when that is not what will be\n    written.\n\n    Under --annotations-only there are no signal tables, and the line read \"Would write 0\n    rows, roughly 0 B.\" for a conversion that goes on to write annotations.csv with three\n    events in it. --info exists to say what a conversion will do; asserting it will write\n    nothing, when it will write a file, is the one thing it must not do.\n\n    How many events there are cannot be answered from the header — the annotation channel has\n    to be read record by record, which is the scan --info is for avoiding. So it says which\n    file, and that the count is not knowable this cheaply, rather than inventing a zero.\n  */\n  /*\n    No signal table to describe, whichever way that came about.\n\n    This asked only whether `--annotations-only` had been given. A recording that has no\n    signal channels — one holding nothing but EDF+ annotations — has none either, and fell\n    through to the estimate line: \"Would write 0 rows, roughly 0 B.\" for a conversion that\n    goes on to write an annotations.csv with events in it, beside channels.csv and\n    metadata.json. That is the sentence 0.4.51 removed, arriving by the other route.\n  */\n  if (!plan.writeSignals || plan.groups.length === 0) {\n    // Named as they will be written. --info is read to find out what a run leaves behind,\n    // and a script that opens the name it was given must find a file there.\n    const suffix = plan.gzip ? '.csv.gz' : '.csv';\n    lines.push(\n      file.annotationSignals.length > 0\n        ? `Would write annotations${suffix} and channels${suffix}, and no signal data. How ` +\n          'many events there are cannot be told from the header.'\n        : `Would write channels${suffix} and no signal data — and no annotations${suffix} ` +\n          'either, since this recording has no annotation channel.',\n    );\n    return lines.join('\\n');\n  }\n\n  // The estimate counts the characters of the CSV, which is what --gzip then compresses.\n  // Reporting it as the size on disk would overstate a compressed conversion several-fold.\n  const compressing = plan.gzip;\n  lines.push(\n    `Would write ${plan.estimate.rows.toLocaleString('en-US')} rows, roughly ` +\n      `${formatBytes(plan.estimate.bytes)}${compressing ? ' before compression' : ''}.`,\n  );\n\n  return lines.join('\\n');\n}\n\n/**\n * The `--info` view as JSON, for surveying files from a script.\n *\n * `indent` is 2 for a single recording, matching what this has always printed, and null for\n * a batch — several pretty-printed documents run together are readable by a streaming parser\n * but not by anything that expects one record per line, and a batch is exactly where\n * line-oriented reading is wanted. null rather than undefined because a default parameter\n * takes effect when undefined is passed, which quietly restored the indentation this was\n * meant to drop; JSON.stringify itself wants undefined, so it is translated at the call.\n *\n * `--info` answers \"what is in this recording and what would converting it cost\", which\n * is exactly the question you want to ask across a directory of hundreds of recordings —\n * and the text table is the wrong shape for that. `--json` previously applied only to\n * conversions, so scripts had to parse the aligned columns or convert files just to learn\n * what was in them.\n *\n * Field names match `metadata.json` where the two describe the same thing, so a survey and\n * a conversion can be read by the same code.\n */\nexport function infoJson(file: EdfFile, plan: ConversionPlan, indent: number | null = 2): string {\n  const { header } = file;\n  const fileFor = new Map<number, string>();\n  for (const group of plan.groups) {\n    for (const channel of group.channels) fileFor.set(channel.signal.index, group.fileName);\n  }\n\n  return JSON.stringify(\n    {\n      path: file.path,\n      bytes: file.fileSize,\n      format: describeFormat(header),\n      start_datetime_local: formatWallClock(header.startDateTime),\n      start_date_raw: header.startDateRaw,\n      start_time_raw: header.startTimeRaw,\n      patient_id: header.patientId,\n      recording_id: header.recordingId,\n      data_records: file.recordCount,\n      data_records_declared: header.declaredRecordCount,\n      record_duration_seconds: header.recordDuration,\n      duration_seconds: file.durationSeconds,\n      // For a discontinuous file this exceeds duration_seconds by the length of the gaps.\n      time_span_seconds: plan.range.recordingEndSeconds - plan.range.recordingStartSeconds,\n      // Where `time_s` begins, and the clock `--start` and `--end` are read against. Usually\n      // zero; not when the first record's timekeeping TAL puts the recording elsewhere. Both\n      // of the fields above are lengths and neither says where that length sits.\n      first_sample_seconds: plan.range.recordingStartSeconds,\n      annotation_channels: file.annotationSignals.length,\n      channels: file.dataSignals.map((signal) => ({\n        signal_index: signal.index,\n        column: plan.columnNames.get(signal.index) ?? '',\n        label: signal.label,\n        unit: signal.physicalDimension,\n        sampling_rate_hz: signal.samplingRate,\n        samples_per_record: signal.samplesPerRecord,\n        physical_min: signal.physicalMin,\n        physical_max: signal.physicalMax,\n        digital_min: signal.digitalMin,\n        digital_max: signal.digitalMax,\n        transducer: signal.transducer,\n        prefiltering: signal.prefiltering,\n        output_file: fileFor.get(signal.index) ?? null,\n      })),\n      estimate: {\n        rows: plan.estimate.rows,\n        // Character count of the CSV. With --gzip the file on disk is smaller than this.\n        bytes: plan.estimate.bytes,\n        exceeds_spreadsheet_limit: plan.estimate.exceedsSpreadsheetLimit,\n      },\n      // The plan's mixed-rate warning replaces the header parser's, as it does everywhere\n      // else. This was the one consumer left out of that when 0.3.2 made the warning follow\n      // --channels, so `--info --json` carried it twice: once counting the rates being\n      // converted and once counting every rate in the file, with the same code and severity.\n      warnings: plan.diagnostics\n        .concat(withoutFileRateWarning(file.diagnostics))\n        .map((d) => ({ code: d.code, severity: d.severity, message: d.message })),\n    },\n    null,\n    indent ?? undefined,\n  );\n}\n\n/** One line per diagnostic, prefixed so warnings are greppable. */\nexport function formatDiagnostics(diagnostics: readonly Diagnostic[]): string {\n  return diagnostics\n    .map((d) => {\n      // Diagnostics quote channel labels, which come from the file, so they need the\n      // same treatment as the --info table.\n      const head = `${d.severity === 'warning' ? 'warning' : 'note'}: ${printable(d.message)}`;\n      return d.hint ? `${head}\\n         ${printable(d.hint)}` : head;\n    })\n    .join('\\n');\n}\n\nexport function formatSummary(result: ConvertResult): string {\n  const lines: string[] = [];\n  const rows: string[][] = [];\n  for (const file of result.files) {\n    // `.csv.gz` is still a CSV, and its rows are still rows. The suffix test dropped the\n    // unit from every line of a --gzip summary, so the numbers stood on their own.\n    rows.push([\n      `  ${file.name}`,\n      file.rows.toLocaleString('en-US'),\n      /\\.csv(\\.gz)?$/u.test(file.name) ? 'rows' : '',\n    ]);\n  }\n  lines.push(`Wrote ${result.outputDir}`);\n  lines.push(table(rows, new Set([1])));\n  lines.push(`Done in ${(result.elapsedMs / 1000).toFixed(1)}s.`);\n  return lines.join('\\n');\n}\n\nexport function summaryJson(result: ConvertResult, indent: number | null = 2): string {\n  return JSON.stringify(\n    {\n      output_dir: result.outputDir,\n      files: result.files,\n      annotations: result.annotationCount,\n      duration_seconds: result.file.durationSeconds,\n      records: result.file.recordCount,\n      elapsed_ms: result.elapsedMs,\n      warnings: result.diagnostics.map((d) => ({ code: d.code, severity: d.severity, message: d.message })),\n    },\n    null,\n    indent ?? undefined,\n  );\n}\n"]}

package/dist/convert/plan.js

@@ -324,9 +324,24 @@ function emptyWindow(range, recordCount) {
             : `This recording's ${recordCount} data records carry no samples in range, so the ` +
                 `signal files hold their headers and no data.`,
         hint: asked
-            ? 'The window is inside the recording but lands where there is no data — past the ' +
-                'last sample, or inside a gap in a discontinuous file. Run with --info to see where ' +
-                'the records actually sit.'
+            ? /*
+                Which of the two it was, rather than the second one always.
+      
+                A recording does not have to start at zero: its first record's timekeeping TAL is
+                what it is timed from, so a file whose records begin at 1000s is asked for with
+                `--start 1000`. `--start 0 --end 1` on that file was told "The window is inside the
+                recording but lands where there is no data — past the last sample, or inside a gap
+                in a discontinuous file", when the window sits entirely before the recording and
+                neither offered explanation applies to it. A start at or past the *end* is already
+                an error, so the window being outside can only mean it is before the beginning.
+              */
+                range.endSeconds <= range.recordingStartSeconds
+                    ? `This recording starts at ${fixed(range.recordingStartSeconds, 3)}s, so the whole ` +
+                        'window sits before it. --start and --end are read on the recording\'s own clock, ' +
+                        'which --info prints as "Timed from".'
+                    : 'The window is inside the recording but lands where there is no data — past the ' +
+                        'last sample, or inside a gap in a discontinuous file. Run with --info to see where ' +
+                        'the records actually sit.'
             : 'Run with --info to see what the header declares.',
     };
 }

package/dist/convert/plan.js.map

@@ -1 +1 @@
-{"version":3,"file":"plan.js","sourceRoot":"","sources":["../../src/convert/plan.ts"],"names":[],"mappings":"AAAA;;;;;;;;;GASG;AAIH,OAAO,EAAE,UAAU,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC3D,OAAO,EAAE,kBAAkB,EAAE,iBAAiB,EAAE,MAAM,iBAAiB,CAAC;AACxE,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAE,cAAc,EAAE,MAAM,kBAAkB,CAAC;AACpE,OAAO,EAAE,MAAM,EAAE,MAAM,mBAAmB,CAAC;AAC3C,OAAO,EAAE,KAAK,EAAE,YAAY,EAAE,MAAM,qBAAqB,CAAC;AAC1D,OAAO,EAAE,gBAAgB,EAAE,kBAAkB,EAAE,cAAc,EAAE,MAAM,eAAe,CAAC;AACrF,OAAO,EAAE,aAAa,EAAE,MAAM,cAAc,CAAC;AAC7C,OAAO,EAAE,mBAAmB,EAAE,YAAY,EAAE,MAAM,iBAAiB,CAAC;AAiGpE,MAAM,SAAS,GAAG,MAAM,CAAC,UAAU,CAAC,QAAQ,CAAC,CAAC;AAE9C,oFAAoF;AACpF,MAAM,CAAC,MAAM,qBAAqB,GAAG,SAAS,CAAC;AAE/C,MAAM,UAAU,SAAS,CAAC,KAAgB,EAAE,UAAuB,EAAE;IACnE,oFAAoF;IACpF,yEAAyE;IACzE,aAAa,CAAC,OAAO,CAAC,CAAC;IAEvB,MAAM,WAAW,GAAiB,EAAE,CAAC;IACrC,MAAM,WAAW,GAAG,gBAAgB,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;IAEpD,sFAAsF;IACtF,uFAAuF;IACvF,wFAAwF;IACxF,KAAK,MAAM,MAAM,IAAI,kBAAkB,CAAC,KAAK,CAAC,OAAO,EAAE,WAAW,CAAC,EAAE,CAAC;QACpE,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,iBAAiB;YACvB,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,UAAU,MAAM,CAAC,KAAK,iBAAiB,MAAM,CAAC,KAAK,mCAAmC;gBACtF,8DAA8D,WAAW,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI;YACjG,IAAI,EAAE,oFAAoF;SAC3F,CAAC,CAAC;IACL,CAAC;IAED,MAAM,KAAK,GAAG,YAAY,CAAC;QACzB,KAAK,EAAE,OAAO,CAAC,KAAK;QACpB,SAAS,EAAE,OAAO,CAAC,SAAS;QAC5B,QAAQ,EAAE,OAAO,CAAC,QAAQ;QAC1B,GAAG,EAAE,OAAO,CAAC,GAAG;QAChB,OAAO,EAAE,OAAO,CAAC,OAAO;QACxB,cAAc,EAAE,KAAK,CAAC,cAAc;QACpC,WAAW,EAAE,KAAK,CAAC,WAAW;QAC9B,YAAY,EAAE,KAAK,CAAC,YAAY;KACjC,CAAC,CAAC;IAEH,MAAM,YAAY,GAAG,OAAO,CAAC,eAAe,KAAK,IAAI,CAAC;IAEtD,IAAI,MAAM,GAAgB,KAAK,CAAC,OAAO,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,aAAa,CAAC,CAAC;IAExE;;;;;;;;;MASE;IACF,IAAI,OAAO,CAAC,QAAQ,IAAI,OAAO,CAAC,QAAQ,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACpD,MAAM,SAAS,GAAG,cAAc,CAAC,KAAK,CAAC,OAAO,EAAE,OAAO,CAAC,QAAQ,CAAC,CAAC;QAClE,IAAI,YAAY;YAAE,MAAM,GAAG,SAAS,CAAC,OAAO,CAAC;QAC7C,KAAK,MAAM,EAAE,IAAI,EAAE,OAAO,EAAE,IAAI,SAAS,CAAC,SAAS,EAAE,CAAC;YACpD,WAAW,CAAC,IAAI,CAAC;gBACf,IAAI,EAAE,iBAAiB;gBACvB,QAAQ,EAAE,SAAS;gBACnB,OAAO,EACL,IAAI,IAAI,aAAa,OAAO,CAAC,MAAM,uBAAuB;oBAC1D,GAAG,MAAM,CAAC,OAAO,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,IAAI,CAAC,CAAC,KAAK,EAAE,CAAC,CAAC,+BAA+B;gBAC7E,IAAI,EAAE,oBAAoB,OAAO,CAAC,CAAC,CAAC,EAAE,KAAK,IAAI,CAAC,qBAAqB;aACtE,CAAC,CAAC;QACL,CAAC;IACH,CAAC;IAED,MAAM,MAAM,GAAG,OAAO,CAAC,MAAM,IAAI,MAAM,CAAC;IACxC,MAAM,MAAM,GAAG,YAAY;QACzB,CAAC,CAAC,WAAW,CAAC,MAAM,EAAE,WAAW,EAAE,OAAO,CAAC,QAAQ,EAAE,OAAO,CAAC,IAAI,KAAK,IAAI,EAAE,MAAM,CAAC;QACnF,CAAC,CAAC,EAAE,CAAC;IACP,MAAM,QAAQ,GAAG,cAAc,CAC7B,MAAM,EACN,KAAK,EACL,KAAK,CAAC,cAAc,EACpB,KAAK,CAAC,YAAY,EAClB,OAAO,CAAC,GAAG,KAAK,IAAI,EACpB,MAAM,CACP,CAAC;IAEF;;;;;;;;;;;;MAYE;IACF,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACtB,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,sBAAsB;YAC5B,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,gBAAgB,MAAM,CAAC,MAAM,4BAA4B;gBACzD,IAAI,MAAM,CAAC,WAAW,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC,IAAI;YAC9E,IAAI,EACF,MAAM,KAAK,MAAM;gBACf,CAAC,CAAC,mFAAmF;gBACrF,CAAC,CAAC,mEAAmE;SAC1E,CAAC,CAAC;IACL,CAAC;IAED;;;;;;;;;MASE;IACF,KAAK,MAAM,KAAK,IAAI,MAAM,EAAE,CAAC;QAC3B,MAAM,IAAI,GAAG,KAAK,CAAC,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,KAAK,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;QACjD,IAAI,IAAI,GAAG,CAAC,IAAI,IAAI,GAAG,EAAE,IAAI,CAAC,KAAK,CAAC,YAAY,EAAE,CAAC;YACjD,WAAW,CAAC,IAAI,CAAC;gBACf,IAAI,EAAE,iBAAiB;gBACvB,QAAQ,EAAE,SAAS;gBACnB,OAAO,EACL,eAAe,UAAU,CAAC,KAAK,CAAC,IAAI,CAAC,6CAA6C;oBAClF,uCAAuC,KAAK,CAAC,QAAQ,+BAA+B;gBACtF,IAAI,EACF,mFAAmF;oBACnF,4DAA4D;aAC/D,CAAC,CAAC;QACL,CAAC;IACH,CAAC;IAED;;;;;;;;;;;;;;;;;;;;MAoBE;IACF,KAAK,MAAM,KAAK,IAAI,MAAM,EAAE,CAAC;QAC3B,MAAM,KAAK,GAAG,KAAK,CAAC,QAAQ,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,kBAAkB,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC;QACzE,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC;YAAE,SAAS;QACjC,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,kBAAkB;YACxB,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,GAAG,MAAM,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,WAAW;gBACzF,mFAAmF;gBACnF,qBAAqB,KAAK,CAAC,QAAQ,GAAG;YACxC,IAAI,EACF,kFAAkF;gBAClF,iEAAiE;SACpE,CAAC,CAAC;IACL,CAAC;IAED;;;;;;;;;;;;MAYE;IACF,IAAI,YAAY,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,IAAI,QAAQ,CAAC,IAAI,KAAK,CAAC,EAAE,CAAC;QAC7D,WAAW,CAAC,IAAI,CAAC,WAAW,CAAC,KAAK,EAAE,KAAK,CAAC,WAAW,CAAC,CAAC,CAAC;IAC1D,CAAC;IAED,IAAI,QAAQ,CAAC,uBAAuB,EAAE,CAAC;QACrC,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,cAAc;YACpB,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,gDAAgD,qBAAqB,CAAC,cAAc,CAAC,OAAO,CAAC,GAAG;gBAChG,qDAAqD;YACvD,IAAI,EAAE,qFAAqF;SAC5F,CAAC,CAAC;IACL,CAAC;IAED,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,IAAI,EAAE,OAAO,CAAC,IAAI,KAAK,IAAI,EAAE,KAAK,EAAE,WAAW,EAAE,YAAY,EAAE,WAAW,EAAE,QAAQ,EAAE,CAAC;AAClH,CAAC;AAED;;;;;;GAMG;AACH,SAAS,WAAW,CAClB,OAA6B,EAC7B,WAAgC,EAChC,cAAkC,EAClC,IAAa,EACb,MAAuB;IAEvB,MAAM,MAAM,GAAG,IAAI,GAAG,EAAuB,CAAC;IAC9C,KAAK,MAAM,MAAM,IAAI,OAAO,EAAE,CAAC;QAC7B,wEAAwE;QACxE,2EAA2E;QAC3E,IAAI,MAAM,CAAC,gBAAgB,KAAK,CAAC;YAAE,SAAS;QAC5C,MAAM,MAAM,GAAG,MAAM,CAAC,GAAG,CAAC,MAAM,CAAC,YAAY,CAAC,CAAC;QAC/C,IAAI,MAAM;YAAE,MAAM,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC;;YAC3B,MAAM,CAAC,GAAG,CAAC,MAAM,CAAC,YAAY,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC;IACjD,CAAC;IAED,MAAM,KAAK,GAAG,CAAC,GAAG,MAAM,CAAC,IAAI,EAAE,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC;IACvD,oFAAoF;IACpF,MAAM,MAAM,GAAG,KAAK,CAAC,MAAM,KAAK,CAAC,IAAI,MAAM,KAAK,MAAM,CAAC;IAEvD;;;;;;;;;;;;;;;;;MAiBE;IACF,MAAM,MAAM,GAAG,IAAI,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,MAAM,CAAC;IACzC,MAAM,KAAK,GAAG,WAAW,CAAC,KAAK,CAAC,CAAC,GAAG,CAAC,CAAC,IAAI,EAAE,EAAE,CAAC,GAAG,IAAI,CAAC,OAAO,CAAC,GAAG,EAAE,GAAG,CAAC,IAAI,CAAC,CAAC;IAC9E,MAAM,IAAI,GAAG,IAAI,GAAG,EAAU,CAAC;IAC/B,MAAM,UAAU,GAAG,CAAC,KAAa,EAAU,EAAE;QAC3C,MAAM,IAAI,GAAG,WAAW,KAAK,CAAC,KAAK,CAAC,EAAE,CAAC;QACvC,IAAI,IAAI,GAAG,GAAG,IAAI,GAAG,MAAM,EAAE,CAAC;QAC9B,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,EAAE,CAAC,EAAE;YAAE,IAAI,GAAG,GAAG,IAAI,IAAI,CAAC,GAAG,MAAM,EAAE,CAAC;QACpE,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC;QACf,OAAO,IAAI,CAAC;IACd,CAAC,CAAC;IAEF,OAAO,KAAK,CAAC,GAAG,CAAC,CAAC,IAAI,EAAE,KAAK,EAAE,EAAE;QAC/B,MAAM,OAAO,GAAG,MAAM,CAAC,GAAG,CAAC,IAAI,CAAC,IAAI,EAAE,CAAC;QACvC,MAAM,KAAK,GAAG,OAAO,CAAC,CAAC,CAAC,CAAC;QACzB,OAAO;YACL,IAAI;YACJ,gBAAgB,EAAE,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,gBAAgB,CAAC,CAAC,CAAC,CAAC;YACpD,QAAQ,EAAE,MAAM,CAAC,CAAC,CAAC,UAAU,MAAM,EAAE,CAAC,CAAC,CAAC,UAAU,CAAC,KAAK,CAAC;YACzD;;;;cAIE;YACF,YAAY,EAAE,MAAM,KAAK,MAAM,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,GAAG,KAAK,CAAC,GAAG,CAAC,YAAY,CAAC,CAAC,CAAC,CAAC,CAAC,YAAY,CAAC,IAAI,CAAC;YAC3F,QAAQ,EAAE,OAAO,CAAC,GAAG,CAAC,CAAC,MAAM,EAAE,EAAE,CAAC,CAAC;gBACjC,MAAM;gBACN,MAAM,EAAE,WAAW,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,UAAU,MAAM,CAAC,KAAK,EAAE;gBACjE,QAAQ,EAAE,cAAc,IAAI,iBAAiB,CAAC,MAAM,CAAC;aACtD,CAAC,CAAC;SACJ,CAAC;IACJ,CAAC,CAAC,CAAC;AACL,CAAC;AAED;;;;;;GAMG;AACH,MAAM,UAAU,sBAAsB,CAAC,WAAkC;IACvE,OAAO,WAAW,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,KAAK,sBAAsB,CAAC,CAAC;AACtE,CAAC;AAED,gEAAgE;AAChE,MAAM,UAAU,QAAQ,CAAC,IAAY;IACnC,OAAO,GAAG,UAAU,CAAC,IAAI,CAAC,CAAC,OAAO,CAAC,GAAG,EAAE,GAAG,CAAC,IAAI,CAAC;AACnD,CAAC;AAED,mFAAmF;AACnF,SAAS,OAAO,CAAC,SAAiB,EAAE,QAAgB,EAAE,MAAM,GAAG,KAAK;IAClE,MAAM,IAAI,GAAG,IAAI,CAAC,GAAG,CAAC,SAAS,CAAC,CAAC;IACjC,MAAM,IAAI,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAC5B,MAAM,QAAQ,GAAG,QAAQ,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,QAAQ,CAAC,CAAC,CAAC,CAAC,CAAC;IAEjD;;;;;;;;;MASE;IACF,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,IAAI,GAAG,CAAC,GAAG,QAAQ,CAAC;IACvD,IAAI,IAAI,GAAG,IAAI;QAAE,OAAO,IAAI,GAAG,IAAI,CAAC,OAAO,CAAC,IAAI,CAAC,GAAG,CAAC,QAAQ,EAAE,GAAG,CAAC,CAAC,CAAC,MAAM,CAAC;IAC5E,OAAO,IAAI,GAAG,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,QAAQ,CAAC;AAC9D,CAAC;AAED;;;;;;;;;;;;;;;;;GAiBG;AACH,SAAS,WAAW,CAAC,KAAoB,EAAE,WAAmB;IAC5D,MAAM,KAAK,GAAG,CAAC,KAAK,CAAC,gBAAgB,CAAC;IACtC,OAAO;QACL,IAAI,EAAE,cAAc;QACpB,QAAQ,EAAE,SAAS;QACnB,OAAO,EAAE,KAAK;YACZ,CAAC,CAAC,gDAAgD,KAAK,CAAC,KAAK,CAAC,YAAY,EAAE,CAAC,CAAC,OAAO;gBACnF,GAAG,KAAK,CAAC,KAAK,CAAC,UAAU,EAAE,CAAC,CAAC,yDAAyD;YACxF,CAAC,CAAC,oBAAoB,WAAW,kDAAkD;gBACjF,8CAA8C;QAClD,IAAI,EAAE,KAAK;YACT,CAAC,CAAC,iFAAiF;gBACjF,qFAAqF;gBACrF,2BAA2B;YAC7B,CAAC,CAAC,kDAAkD;KACvD,CAAC;AACJ,CAAC;AAED,SAAS,cAAc,CACrB,MAA4B,EAC5B,KAAoB,EACpB,cAAsB,EACtB,YAA6C,EAC7C,GAAY,EACZ,MAAuB;IAEvB,IAAI,IAAI,GAAG,CAAC,CAAC;IACb,IAAI,KAAK,GAAG,CAAC,CAAC;IACd,IAAI,OAAO,GAAG,KAAK,CAAC;IACpB,oFAAoF;IACpF,sFAAsF;IACtF,IAAI,QAAQ,GAAG,CAAC,CAAC;IAEjB,KAAK,MAAM,KAAK,IAAI,MAAM,EAAE,CAAC;QAC3B,IAAI,SAAS,GAAG,CAAC,CAAC;QAClB,KAAK,IAAI,MAAM,GAAG,KAAK,CAAC,WAAW,EAAE,MAAM,GAAG,KAAK,CAAC,SAAS,EAAE,MAAM,EAAE,EAAE,CAAC;YACxE,MAAM,WAAW,GAAG,YAAY;gBAC9B,CAAC,CAAC,CAAC,YAAY,CAAC,MAAM,CAAC,IAAI,MAAM,GAAG,cAAc,CAAC;gBACnD,CAAC,CAAC,MAAM,GAAG,cAAc,CAAC;YAC5B,SAAS,IAAI,mBAAmB,CAAC;gBAC/B,WAAW;gBACX,IAAI,EAAE,KAAK,CAAC,IAAI;gBAChB,gBAAgB,EAAE,KAAK,CAAC,gBAAgB;gBACxC,YAAY,EAAE,KAAK,CAAC,YAAY;gBAChC,UAAU,EAAE,KAAK,CAAC,UAAU;aAC7B,CAAC,CAAC;QACL,CAAC;QACD,IAAI,MAAM,KAAK,MAAM,EAAE,CAAC;YACtB,kEAAkE;YAClE,MAAM,UAAU,GAAG,SAAS,GAAG,KAAK,CAAC,QAAQ,CAAC,MAAM,CAAC;YACrD,IAAI,IAAI,UAAU,CAAC;YACnB,QAAQ,IAAI,UAAU,CAAC;YACvB;;;;cAIE;YACF,MAAM,SAAS,GAAG,OAAO,CAAC,KAAK,CAAC,UAAU,EAAE,KAAK,CAAC,YAAY,CAAC,CAAC;YAChE,KAAK,MAAM,OAAO,IAAI,KAAK,CAAC,QAAQ,EAAE,CAAC;gBACrC,MAAM,UAAU,GAAG,OAAO,CACxB,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,OAAO,CAAC,MAAM,CAAC,WAAW,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,OAAO,CAAC,MAAM,CAAC,WAAW,CAAC,CAAC,EACpF,OAAO,CAAC,QAAQ,EAChB,OAAO,CAAC,MAAM,CAAC,WAAW,GAAG,CAAC,IAAI,OAAO,CAAC,MAAM,CAAC,WAAW,GAAG,CAAC,CACjE,CAAC;gBACF,MAAM,SAAS,GAAG,MAAM,CAAC,UAAU,CAAC,cAAc,CAAC,OAAO,CAAC,MAAM,CAAC,CAAC,CAAC;gBACpE,8BAA8B;gBAC9B,KAAK,IAAI,SAAS,GAAG,CAAC,SAAS,GAAG,SAAS,GAAG,UAAU,GAAG,CAAC,CAAC,CAAC;YAChE,CAAC;YACD,SAAS;QACX,CAAC;QAED,IAAI,IAAI,SAAS,CAAC;QAClB,IAAI,SAAS,GAAG,CAAC,GAAG,qBAAqB;YAAE,OAAO,GAAG,IAAI,CAAC;QAE1D;;;;;;;;;;;;;;;;UAgBE;QACF,MAAM,SAAS,GAAG,OAAO,CAAC,KAAK,CAAC,UAAU,EAAE,KAAK,CAAC,YAAY,CAAC,CAAC;QAChE,MAAM,SAAS,GAAG,KAAK,CAAC,QAAQ,CAAC,MAAM,CACrC,CAAC,GAAG,EAAE,CAAC,EAAE,EAAE,CACT,GAAG;YACH,OAAO,CACL,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,MAAM,CAAC,WAAW,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,MAAM,CAAC,WAAW,CAAC,CAAC,EACxE,CAAC,CAAC,QAAQ,EACV,CAAC,CAAC,MAAM,CAAC,WAAW,GAAG,CAAC,IAAI,CAAC,CAAC,MAAM,CAAC,WAAW,GAAG,CAAC,CACrD,EACH,CAAC,CACF,CAAC;QACF,2CAA2C;QAC3C,KAAK,IAAI,SAAS,GAAG,CAAC,SAAS,GAAG,SAAS,GAAG,KAAK,CAAC,QAAQ,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC;QACzE;;;;;;;;;;;UAWE;QACF,KAAK,IAAI,MAAM,CAAC,UAAU,CAAC,MAAM,CAAC,CAAC,QAAQ,EAAE,GAAG,KAAK,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QAC3F,mFAAmF;QACnF,sFAAsF;QACtF,IAAI,GAAG;YAAE,KAAK,IAAI,SAAS,CAAC;IAC9B,CAAC;IAED,IAAI,MAAM,KAAK,MAAM,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QAC3C,IAAI,QAAQ,GAAG,CAAC,GAAG,qBAAqB;YAAE,OAAO,GAAG,IAAI,CAAC;QACzD,KAAK,IAAI,MAAM,CAAC,UAAU,CAAC,MAAM,CAAC,CAAC,QAAQ,EAAE,SAAS,EAAE,OAAO,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACvE,IAAI,GAAG;YAAE,KAAK,IAAI,SAAS,CAAC;IAC9B,CAAC;IAED,OAAO,EAAE,IAAI,EAAE,KAAK,EAAE,uBAAuB,EAAE,OAAO,EAAE,CAAC;AAC3D,CAAC","sourcesContent":["/**\n * Turning a request into a concrete conversion plan.\n *\n * The plan is where the tool's central promise is enforced: channels recorded at\n * different sampling rates are never merged into one table. A single wide CSV can\n * only hold mixed rates by inventing samples for the slow channels — MNE, for\n * instance, expands three genuine 1 Hz temperature readings into 768 interpolated\n * values without warning. Instead each distinct rate gets its own file, so every\n * number in every output file is a number that was actually recorded.\n */\n\nimport type { Diagnostic } from '../edf/errors.js';\nimport type { EdfSignal } from '../edf/header.js';\nimport { formatRate, formatRates } from '../edf/header.js';\nimport { decimalsAreClamped, decimalsForSignal } from '../edf/scale.js';\nimport { UTF8_BOM, csvRow, escapeCsvField } from '../format/csv.js';\nimport { listed } from '../format/list.js';\nimport { fixed, timeDecimals } from '../format/number.js';\nimport { buildColumnNames, renamedByCollision, selectChannels } from './channels.js';\nimport { assertOptions } from './options.js';\nimport { countSamplesInRange, resolveRange } from './time-range.js';\nimport type { ResolvedRange } from './time-range.js';\n\nexport interface PlannedChannel {\n  signal: EdfSignal;\n  column: string;\n  decimals: number;\n}\n\nexport interface RateGroup {\n  /** Sampling rate in Hz shared by every channel in this group. */\n  rate: number;\n  samplesPerRecord: number;\n  fileName: string;\n  timeDecimals: number;\n  channels: PlannedChannel[];\n}\n\nexport interface PlanInput {\n  signals: readonly EdfSignal[];\n  recordDuration: number;\n  recordCount: number;\n  hasAnnotationChannel: boolean;\n  /**\n   * True start time of each data record, supplied for discontinuous files. The\n   * requested time window is resolved against these rather than against\n   * `recordCount * recordDuration`, which for a file with gaps is the amount of\n   * data rather than the span of time it covers.\n   */\n  recordStarts?: Float64Array | null | undefined;\n}\n\nexport interface PlanOptions {\n  channels?: readonly string[] | undefined;\n  start?: number | undefined;\n  /** The `--start` value exactly as typed, for error messages. */\n  startText?: string | undefined;\n  duration?: number | undefined;\n  end?: number | undefined;\n  /** The `--end` value exactly as typed, for error messages. */\n  endText?: string | undefined;\n  annotationsOnly?: boolean | undefined;\n  /** Force a fixed number of decimals instead of deriving it per channel. */\n  decimals?: number | undefined;\n  /** Compress each CSV with gzip, giving every one of them a `.gz` name. */\n  gzip?: boolean | undefined;\n  /** Start each CSV with a UTF-8 byte order mark, so Excel reads it as UTF-8. */\n  bom?: boolean | undefined;\n  /**\n   * How the samples are arranged in the CSV.\n   *\n   * `'wide'`, the default, gives one column per channel and one file per sampling rate.\n   * `'long'` gives one file, three columns — `time_s`, `channel`, `value` — and one row per\n   * sample. See ConversionPlan.layout for why that is the only way to put channels recorded\n   * at different rates in one table without inventing samples.\n   */\n  layout?: 'wide' | 'long' | undefined;\n}\n\nexport interface ConversionPlan {\n  groups: RateGroup[];\n  /**\n   * How the samples are arranged. `'wide'` is a column per channel and a file per rate;\n   * `'long'` is `time_s,channel,value`, one row per sample, all rates in one file.\n   *\n   * The wide layout has to split a mixed-rate recording across files: a 100 Hz channel and\n   * a 1 Hz channel share no rows, and putting them in one wide table means either 99 empty\n   * cells out of every hundred or inventing the samples that would fill them. In the long\n   * layout each sample carries its own time, so nothing has to line up and nothing is\n   * invented — which also makes it the one layout `--stdout` can stream for such a file.\n   */\n  layout: 'wide' | 'long';\n\n  /**\n   * Whether the CSVs will be compressed.\n   *\n   * Recorded rather than inferred from the group file names. Under `--annotations-only`\n   * there are no groups to read it off, and `--info` named `annotations.csv` for a run that\n   * wrote `annotations.csv.gz`.\n   */\n  gzip: boolean;\n  range: ResolvedRange;\n  columnNames: Map<number, string>;\n  writeSignals: boolean;\n  diagnostics: Diagnostic[];\n  estimate: OutputEstimate;\n}\n\nexport interface OutputEstimate {\n  /** Total data rows across every signal file. */\n  rows: number;\n  /** Approximate size of the signal CSVs on disk. */\n  bytes: number;\n  /** True when any single file would exceed Excel's row limit. */\n  exceedsSpreadsheetLimit: boolean;\n}\n\nconst BOM_BYTES = Buffer.byteLength(UTF8_BOM);\n\n/** Excel and most spreadsheet tools stop at 1,048,576 rows including the header. */\nexport const SPREADSHEET_ROW_LIMIT = 1_048_576;\n\nexport function buildPlan(input: PlanInput, options: PlanOptions = {}): ConversionPlan {\n  // First, and before a directory is created or a stream opened, so a rejected option\n  // leaves nothing behind. See assertOptions for what used to get through.\n  assertOptions(options);\n\n  const diagnostics: Diagnostic[] = [];\n  const columnNames = buildColumnNames(input.signals);\n\n  // A channel whose own label was taken by another channel's disambiguating suffix. The\n  // duplicate-label warning is about the labels that collided; this is about the channel\n  // that lost its name to them, which is the one whose column no longer matches the file.\n  for (const signal of renamedByCollision(input.signals, columnNames)) {\n    diagnostics.push({\n      code: 'DUPLICATE_LABEL',\n      severity: 'warning',\n      message:\n        `Signal ${signal.index} is labelled \"${signal.label}\", which is also the column name ` +\n        `another channel's \"_ch\" suffix produces, so its column is \"${columnNames.get(signal.index)}\".`,\n      hint: 'Column names are unique; look this channel up in channels.csv by its signal_index.',\n    });\n  }\n\n  const range = resolveRange({\n    start: options.start,\n    startText: options.startText,\n    duration: options.duration,\n    end: options.end,\n    endText: options.endText,\n    recordDuration: input.recordDuration,\n    recordCount: input.recordCount,\n    recordStarts: input.recordStarts,\n  });\n\n  const writeSignals = options.annotationsOnly !== true;\n\n  let chosen: EdfSignal[] = input.signals.filter((s) => !s.isAnnotations);\n\n  /*\n    Channel names are checked even under --annotations-only, where the selection is not\n    otherwise used.\n\n    Skipping the check meant `--channels TYPO --annotations-only` exited 0 in silence while\n    the same typo without the flag was a usage error, and `--channels \"\"` stayed an error\n    in both — so a mistyped name was the one form of bad input the tool accepted quietly.\n    Everywhere else a term matching nothing is reported rather than ignored; a flag that\n    happens not to apply is a poor reason to make an exception.\n  */\n  if (options.channels && options.channels.length > 0) {\n    const selection = selectChannels(input.signals, options.channels);\n    if (writeSignals) chosen = selection.signals;\n    for (const { term, matched } of selection.ambiguous) {\n      diagnostics.push({\n        code: 'DUPLICATE_LABEL',\n        severity: 'warning',\n        message:\n          `\"${term}\" matches ${matched.length} channels (positions ` +\n          `${listed(matched.map((s) => `#${s.index}`))}); all of them were selected.`,\n        hint: `Use --channels \"#${matched[0]?.index ?? 0}\" to pick just one.`,\n      });\n    }\n  }\n\n  const layout = options.layout ?? 'wide';\n  const groups = writeSignals\n    ? groupByRate(chosen, columnNames, options.decimals, options.gzip === true, layout)\n    : [];\n  const estimate = estimateOutput(\n    groups,\n    range,\n    input.recordDuration,\n    input.recordStarts,\n    options.bom === true,\n    layout,\n  );\n\n  /*\n    The mixed-rate warning describes what this conversion does, not what the file holds.\n\n    The header parser raises its own, which is right for `parseHeader` — but it sees every\n    channel and knows nothing about `--channels`. Converting one channel out of a three-rate\n    recording therefore announced \"3 different sampling rates ... written to one file per\n    rate\" over a run that wrote one file, in the same output where `--info` had already\n    marked the other two \"(not selected)\". Selecting two of the three was wrong the other\n    way: still \"3\".\n\n    Callers combining these with a file's own diagnostics drop that copy in favour of this\n    one; see `withoutFileRateWarning`.\n  */\n  if (groups.length > 1) {\n    diagnostics.push({\n      code: 'MIXED_SAMPLING_RATES',\n      severity: 'warning',\n      message:\n        `Channels use ${groups.length} different sampling rates ` +\n        `(${listed(formatRates(groups.map((g) => g.rate)).map((r) => `${r} Hz`))}).`,\n      hint:\n        layout === 'long'\n          ? 'They share one table, each row carrying its own time, so no channel is resampled.'\n          : 'They are written to one file per rate so no channel is resampled.',\n    });\n  }\n\n  /*\n    A time column that cannot tell two samples apart.\n\n    Sample times are written to at most nine decimal places, which separates everything up to\n    a gigahertz. Below that the column repeats: a recording of 1 ns records holding ten\n    samples each writes twenty rows carrying three distinct times, so joining or plotting on\n    `time_s` silently collapses them. Nothing is lost from the file — every sample is there,\n    in order — but the column stops being an identifier, and that is worth saying rather than\n    leaving to be discovered.\n  */\n  for (const group of groups) {\n    const step = group.rate > 0 ? 1 / group.rate : 0;\n    if (step > 0 && step < 10 ** -group.timeDecimals) {\n      diagnostics.push({\n        code: 'TIME_RESOLUTION',\n        severity: 'warning',\n        message:\n          `Channels at ${formatRate(group.rate)} Hz sample faster than the time column can ` +\n          `distinguish, so consecutive rows in ${group.fileName} carry the same time_s value.`,\n        hint:\n          'Every sample is written, in order. Use the row number rather than time_s to tell ' +\n          'them apart, or convert one rate at a time with --channels.',\n      });\n    }\n  }\n\n  /*\n    The same failure as TIME_RESOLUTION, one column over.\n\n    A channel whose quantization step is below 1e-98 needs more decimals than `toFixed` can\n    print, so consecutive digital codes round to the same text and the arithmetic the FAQ\n    gives for recovering them stops working. That used to happen at 1e-20 and silently — see\n    MAX_DERIVED_DECIMALS. It is rare now, but \"rare\" is the reason to say so rather than the\n    reason not to.\n\n    Asked of the ceiling, not of the precision in use, and so asked whatever `--decimals`\n    says. `--decimals 2` on a channel needing 3 is a trade the caller made knowingly, and\n    reporting it was reporting the flag back at the person who typed it — every channel of an\n    ordinary EEG raised this, and since --strict turns any diagnostic into exit 1,\n    `--decimals 2 --strict` could not succeed on any recording at all.\n\n    0.5.10 fixed that by skipping the check whenever `--decimals` was given, which suppressed\n    the real case along with the false one: at `--decimals 20` a channel stepping by 1e-106\n    printed every code it had as `0.00000000000000000000`, and said nothing. The question is\n    not who chose the precision. It is whether any precision the tool can print would\n    separate consecutive codes.\n  */\n  for (const group of groups) {\n    const short = group.channels.filter((c) => decimalsAreClamped(c.signal));\n    if (short.length === 0) continue;\n    diagnostics.push({\n      code: 'VALUE_RESOLUTION',\n      severity: 'warning',\n      message:\n        `${listed(short.map((c) => c.column))} ${short.length === 1 ? 'steps' : 'step'} by less ` +\n        `than any number of decimals this can print, so some consecutive samples round to ` +\n        `the same value in ${group.fileName}.`,\n      hint:\n        'Every sample is written, in order, and the physical values are computed at full ' +\n        'precision either way. What is lost is only in the printed text.',\n    });\n  }\n\n  /*\n    A window that selects nothing is a fact about the plan, so the plan is where it is raised.\n\n    It was pushed by `convert()` from the rows actually written, which meant `--info` never\n    said it: `--info --start 0.31 --end 0.39` on a 10 Hz recording printed \"Would write 0\n    rows\" with no warning and exited 0 under `--strict`, while converting the same window\n    warned and exited 1. The hint says \"Run with --info to see where the records actually\n    sit\" — advising the reader into the one mode that would not tell them.\n\n    The estimate's row count is exact, which `npm run estimate` checks across every fixture\n    crossed with every option set, so raising it from the plan says the same thing the rows\n    would have.\n  */\n  if (writeSignals && groups.length > 0 && estimate.rows === 0) {\n    diagnostics.push(emptyWindow(range, input.recordCount));\n  }\n\n  if (estimate.exceedsSpreadsheetLimit) {\n    diagnostics.push({\n      code: 'LARGE_OUTPUT',\n      severity: 'warning',\n      message:\n        `At least one output file will have more than ${SPREADSHEET_ROW_LIMIT.toLocaleString('en-US')} ` +\n        `rows, which is more than Excel or Numbers can open.`,\n      hint: 'Use --start and --duration to convert a section, or read the file with pandas or R.',\n    });\n  }\n\n  return { groups, layout, gzip: options.gzip === true, range, columnNames, writeSignals, diagnostics, estimate };\n}\n\n/**\n * Partition channels by sampling rate, largest first.\n *\n * The common case — every channel at one rate — collapses to a single group and a\n * single `signals.csv`, so the honest behaviour costs nothing when there is nothing\n * to be honest about.\n */\nfunction groupByRate(\n  signals: readonly EdfSignal[],\n  columnNames: Map<number, string>,\n  forcedDecimals: number | undefined,\n  gzip: boolean,\n  layout: 'wide' | 'long',\n): RateGroup[] {\n  const byRate = new Map<number, EdfSignal[]>();\n  for (const signal of signals) {\n    // A channel with no samples has no sampling rate to group by, and would\n    // otherwise produce an empty \"0hz\" file. The header parser already warned.\n    if (signal.samplesPerRecord === 0) continue;\n    const bucket = byRate.get(signal.samplingRate);\n    if (bucket) bucket.push(signal);\n    else byRate.set(signal.samplingRate, [signal]);\n  }\n\n  const rates = [...byRate.keys()].sort((a, b) => b - a);\n  // The long layout writes one table whatever the rates are, so every group names it.\n  const single = rates.length === 1 || layout === 'long';\n\n  /*\n    Two distinct rates can produce the same slug, because the slug rounds to six decimal\n    places. Rates come from samplesPerRecord / recordDuration and every channel shares the\n    record duration, so the closest two rates can be is 1 / recordDuration — which drops\n    below 1e-6 once a record is longer than about eleven days. Absurd, but the header\n    permits it, and the failure was silent and destructive: both groups opened a write\n    stream on the same path, so the file ended up holding interleaved rows from both\n    channels under a header naming only one of them.\n\n    Distinct rates therefore get distinct files, always. The suffix is only ever reached by\n    a collision, so ordinary recordings keep the names they have always had.\n\n    Naming from the whole set of rates at once removes most of those collisions before the\n    suffix has to. Rounding each rate on its own gave 1e-6 Hz and 1.25e-6 Hz the same slug,\n    and the numbering below then produced signals_0_000001hz.csv and signals_0_000001hz_2.csv\n    — two files that no longer overwrite each other, but of which only one is named for the\n    rate it holds. The suffix stays as the backstop for anything this still cannot separate.\n  */\n  const suffix = gzip ? '.csv.gz' : '.csv';\n  const slugs = formatRates(rates).map((text) => `${text.replace('.', '_')}hz`);\n  const used = new Set<string>();\n  const uniqueName = (index: number): string => {\n    const base = `signals_${slugs[index]}`;\n    let name = `${base}${suffix}`;\n    for (let n = 2; used.has(name); n++) name = `${base}_${n}${suffix}`;\n    used.add(name);\n    return name;\n  };\n\n  return rates.map((rate, index) => {\n    const members = byRate.get(rate) ?? [];\n    const first = members[0];\n    return {\n      rate,\n      samplesPerRecord: first ? first.samplesPerRecord : 0,\n      fileName: single ? `signals${suffix}` : uniqueName(index),\n      /*\n        In the long layout every rate shares a `time_s` column, so they share its precision:\n        the finest any of them needs. Writing 100 Hz at three places and 256 Hz at eight in\n        the same column would make the column's meaning depend on the row.\n      */\n      timeDecimals: layout === 'long' ? Math.max(...rates.map(timeDecimals)) : timeDecimals(rate),\n      channels: members.map((signal) => ({\n        signal,\n        column: columnNames.get(signal.index) ?? `signal_${signal.index}`,\n        decimals: forcedDecimals ?? decimalsForSignal(signal),\n      })),\n    };\n  });\n}\n\n/**\n * A file's diagnostics with the header's mixed-rate warning removed.\n *\n * `buildPlan` raises that warning for the channels actually being converted, so keeping both\n * would either duplicate it or contradict it. The header parser's copy stays where it is, for\n * callers reading a header without planning a conversion.\n */\nexport function withoutFileRateWarning(diagnostics: readonly Diagnostic[]): Diagnostic[] {\n  return diagnostics.filter((d) => d.code !== 'MIXED_SAMPLING_RATES');\n}\n\n/** `256hz`, `12_5hz` — safe in a filename on every platform. */\nexport function rateSlug(rate: number): string {\n  return `${formatRate(rate).replace('.', '_')}hz`;\n}\n\n/** Characters a fixed-decimal number of this magnitude occupies, sign included. */\nfunction widthOf(magnitude: number, decimals: number, signed = false): number {\n  const size = Math.abs(magnitude);\n  const sign = signed ? 1 : 0;\n  const fraction = decimals > 0 ? 1 + decimals : 0;\n\n  /*\n    Cells are written with toFixed, which rounds. Taking the integer digits from the floor of\n    the bound therefore under-counted whenever rounding carried into a new digit: a channel\n    bounded at 9999.999 and written to zero decimals produces \"10000\", five characters where\n    the floor of 9999.999 suggests four. Every cell on such a channel was a byte short, and\n    `--info` reported 127 KB for a file that came out 131 KB.\n\n    Measuring the bound as rendered removes that. toFixed switches to exponential notation\n    past 1e21, so the arithmetic form still covers magnitudes beyond it.\n  */\n  if (!Number.isFinite(size)) return sign + 1 + fraction;\n  if (size < 1e21) return sign + size.toFixed(Math.min(decimals, 100)).length;\n  return sign + (Math.floor(Math.log10(size)) + 1) + fraction;\n}\n\n/**\n * Raised when the conversion had signal tables to fill and put no data rows in any of them.\n *\n * A window can land where there are no samples without being past the end of the recording:\n * between the last sample and the nominal end of the last record, or — on a discontinuous\n * file — inside a gap. `--start 2 --end 10` on a recording whose records sit at 0s, 1s and\n * 10s asks for eight seconds that contain no data at all.\n *\n * What came out was a signals.csv holding its header and nothing else, exit 0, no warning,\n * and `--strict` passing. The closing summary does say \"signals.csv 0 rows\" and --json\n * carries `rows: 0`, so it was not quite invisible — but a header-only file is exactly what\n * a successful extraction of an empty range looks like, and everywhere else that a request\n * produces nothing this tool says so: a --channels term matching nothing is an error, and\n * --annotations-only on a file with no events raises NO_ANNOTATIONS. A warning rather than\n * an error because a batch of five hundred recordings should not stop for one whose gap\n * happens to line up with the window; --strict turns it into a failure for those who want\n * that.\n */\nfunction emptyWindow(range: ResolvedRange, recordCount: number): Diagnostic {\n  const asked = !range.isWholeRecording;\n  return {\n    code: 'EMPTY_WINDOW',\n    severity: 'warning',\n    message: asked\n      ? `No samples fall inside the requested window (${fixed(range.startSeconds, 3)}s to ` +\n        `${fixed(range.endSeconds, 3)}s), so the signal files hold their headers and no data.`\n      : `This recording's ${recordCount} data records carry no samples in range, so the ` +\n        `signal files hold their headers and no data.`,\n    hint: asked\n      ? 'The window is inside the recording but lands where there is no data — past the ' +\n        'last sample, or inside a gap in a discontinuous file. Run with --info to see where ' +\n        'the records actually sit.'\n      : 'Run with --info to see what the header declares.',\n  };\n}\n\nfunction estimateOutput(\n  groups: readonly RateGroup[],\n  range: ResolvedRange,\n  recordDuration: number,\n  recordStarts: Float64Array | null | undefined,\n  bom: boolean,\n  layout: 'wide' | 'long',\n): OutputEstimate {\n  let rows = 0;\n  let bytes = 0;\n  let exceeds = false;\n  // One table in the long layout, so the row limit applies to the sum rather than the\n  // largest group, and the header and mark are counted once rather than once per group.\n  let longRows = 0;\n\n  for (const group of groups) {\n    let groupRows = 0;\n    for (let record = range.startRecord; record < range.endRecord; record++) {\n      const recordStart = recordStarts\n        ? (recordStarts[record] ?? record * recordDuration)\n        : record * recordDuration;\n      groupRows += countSamplesInRange({\n        recordStart,\n        rate: group.rate,\n        samplesPerRecord: group.samplesPerRecord,\n        startSeconds: range.startSeconds,\n        endSeconds: range.endSeconds,\n      });\n    }\n    if (layout === 'long') {\n      // A row per sample per channel rather than a row per sample time.\n      const groupCells = groupRows * group.channels.length;\n      rows += groupCells;\n      longRows += groupCells;\n      /*\n        `time_s,channel,value`: the time, the channel name as it will be escaped into the\n        cell, and the widest the value can print. Same over-counting rule as the wide\n        layout — the declared physical range bounds a cell, and most samples sit under it.\n      */\n      const timeWidth = widthOf(range.endSeconds, group.timeDecimals);\n      for (const channel of group.channels) {\n        const valueWidth = widthOf(\n          Math.max(Math.abs(channel.signal.physicalMin), Math.abs(channel.signal.physicalMax)),\n          channel.decimals,\n          channel.signal.physicalMin < 0 || channel.signal.physicalMax < 0,\n        );\n        const nameWidth = Buffer.byteLength(escapeCsvField(channel.column));\n        // Two commas and the newline.\n        bytes += groupRows * (timeWidth + nameWidth + valueWidth + 3);\n      }\n      continue;\n    }\n\n    rows += groupRows;\n    if (groupRows + 1 > SPREADSHEET_ROW_LIMIT) exceeds = true;\n\n    /*\n      Width per cell, from the channel's own calibration rather than a flat allowance.\n\n      The old `decimals + 6` budgeted six characters for the sign, integer part and decimal\n      point on every channel, whatever it actually held. That over-counted a millivolt\n      channel spanning ±5 by four characters a cell and ran 30-55% high across the fixture\n      set — on a number people use to decide whether a conversion is worth starting.\n\n      The channel's declared physical range is what bounds a cell, so that bound is what is\n      used. Most samples sit below it, so this still reads high, which is the direction a\n      size estimate should err in.\n\n      One case is outside the bound rather than under it: nothing obliges a recording to keep\n      its samples inside the digital range it declares, and one that does not maps outside the\n      physical range too. Such a file can convert larger than the estimate. Clamping the data\n      to make the estimate true is not a trade worth making — the samples are what they are.\n    */\n    const timeWidth = widthOf(range.endSeconds, group.timeDecimals);\n    const cellWidth = group.channels.reduce(\n      (sum, c) =>\n        sum +\n        widthOf(\n          Math.max(Math.abs(c.signal.physicalMin), Math.abs(c.signal.physicalMax)),\n          c.decimals,\n          c.signal.physicalMin < 0 || c.signal.physicalMax < 0,\n        ),\n      0,\n    );\n    // One comma per channel, plus the newline.\n    bytes += groupRows * (timeWidth + cellWidth + group.channels.length + 1);\n    /*\n      The header row, measured as it will be written rather than as the labels are stored.\n\n      A column name is quoted when it contains a comma, a quote, a newline or a leading or\n      trailing space, and every quote inside it is doubled. Counting the raw label under-counted\n      that row: three channels labelled `a,b,c,d,e`, `x\"y` and `plain` write a 32-byte header\n      and were budgeted 27. EDF labels are free text, so commas in them are ordinary — a montage\n      written as `EEG Fpz-Cz, ref` is exactly the kind of thing this is for.\n\n      csvRow is the function that writes it, so it is the function that measures it. Nothing\n      else is in a position to stay correct when the quoting rules change.\n    */\n    bytes += Buffer.byteLength(csvRow(['time_s', ...group.channels.map((c) => c.column)])) + 1;\n    // Three bytes per file under --bom. Small, but the estimate promises never to read\n    // under what gets written, and a one-row conversion is small enough for it to matter.\n    if (bom) bytes += BOM_BYTES;\n  }\n\n  if (layout === 'long' && groups.length > 0) {\n    if (longRows + 1 > SPREADSHEET_ROW_LIMIT) exceeds = true;\n    bytes += Buffer.byteLength(csvRow(['time_s', 'channel', 'value'])) + 1;\n    if (bom) bytes += BOM_BYTES;\n  }\n\n  return { rows, bytes, exceedsSpreadsheetLimit: exceeds };\n}\n"]}
+{"version":3,"file":"plan.js","sourceRoot":"","sources":["../../src/convert/plan.ts"],"names":[],"mappings":"AAAA;;;;;;;;;GASG;AAIH,OAAO,EAAE,UAAU,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAC;AAC3D,OAAO,EAAE,kBAAkB,EAAE,iBAAiB,EAAE,MAAM,iBAAiB,CAAC;AACxE,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAE,cAAc,EAAE,MAAM,kBAAkB,CAAC;AACpE,OAAO,EAAE,MAAM,EAAE,MAAM,mBAAmB,CAAC;AAC3C,OAAO,EAAE,KAAK,EAAE,YAAY,EAAE,MAAM,qBAAqB,CAAC;AAC1D,OAAO,EAAE,gBAAgB,EAAE,kBAAkB,EAAE,cAAc,EAAE,MAAM,eAAe,CAAC;AACrF,OAAO,EAAE,aAAa,EAAE,MAAM,cAAc,CAAC;AAC7C,OAAO,EAAE,mBAAmB,EAAE,YAAY,EAAE,MAAM,iBAAiB,CAAC;AAiGpE,MAAM,SAAS,GAAG,MAAM,CAAC,UAAU,CAAC,QAAQ,CAAC,CAAC;AAE9C,oFAAoF;AACpF,MAAM,CAAC,MAAM,qBAAqB,GAAG,SAAS,CAAC;AAE/C,MAAM,UAAU,SAAS,CAAC,KAAgB,EAAE,UAAuB,EAAE;IACnE,oFAAoF;IACpF,yEAAyE;IACzE,aAAa,CAAC,OAAO,CAAC,CAAC;IAEvB,MAAM,WAAW,GAAiB,EAAE,CAAC;IACrC,MAAM,WAAW,GAAG,gBAAgB,CAAC,KAAK,CAAC,OAAO,CAAC,CAAC;IAEpD,sFAAsF;IACtF,uFAAuF;IACvF,wFAAwF;IACxF,KAAK,MAAM,MAAM,IAAI,kBAAkB,CAAC,KAAK,CAAC,OAAO,EAAE,WAAW,CAAC,EAAE,CAAC;QACpE,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,iBAAiB;YACvB,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,UAAU,MAAM,CAAC,KAAK,iBAAiB,MAAM,CAAC,KAAK,mCAAmC;gBACtF,8DAA8D,WAAW,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI;YACjG,IAAI,EAAE,oFAAoF;SAC3F,CAAC,CAAC;IACL,CAAC;IAED,MAAM,KAAK,GAAG,YAAY,CAAC;QACzB,KAAK,EAAE,OAAO,CAAC,KAAK;QACpB,SAAS,EAAE,OAAO,CAAC,SAAS;QAC5B,QAAQ,EAAE,OAAO,CAAC,QAAQ;QAC1B,GAAG,EAAE,OAAO,CAAC,GAAG;QAChB,OAAO,EAAE,OAAO,CAAC,OAAO;QACxB,cAAc,EAAE,KAAK,CAAC,cAAc;QACpC,WAAW,EAAE,KAAK,CAAC,WAAW;QAC9B,YAAY,EAAE,KAAK,CAAC,YAAY;KACjC,CAAC,CAAC;IAEH,MAAM,YAAY,GAAG,OAAO,CAAC,eAAe,KAAK,IAAI,CAAC;IAEtD,IAAI,MAAM,GAAgB,KAAK,CAAC,OAAO,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,aAAa,CAAC,CAAC;IAExE;;;;;;;;;MASE;IACF,IAAI,OAAO,CAAC,QAAQ,IAAI,OAAO,CAAC,QAAQ,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACpD,MAAM,SAAS,GAAG,cAAc,CAAC,KAAK,CAAC,OAAO,EAAE,OAAO,CAAC,QAAQ,CAAC,CAAC;QAClE,IAAI,YAAY;YAAE,MAAM,GAAG,SAAS,CAAC,OAAO,CAAC;QAC7C,KAAK,MAAM,EAAE,IAAI,EAAE,OAAO,EAAE,IAAI,SAAS,CAAC,SAAS,EAAE,CAAC;YACpD,WAAW,CAAC,IAAI,CAAC;gBACf,IAAI,EAAE,iBAAiB;gBACvB,QAAQ,EAAE,SAAS;gBACnB,OAAO,EACL,IAAI,IAAI,aAAa,OAAO,CAAC,MAAM,uBAAuB;oBAC1D,GAAG,MAAM,CAAC,OAAO,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,IAAI,CAAC,CAAC,KAAK,EAAE,CAAC,CAAC,+BAA+B;gBAC7E,IAAI,EAAE,oBAAoB,OAAO,CAAC,CAAC,CAAC,EAAE,KAAK,IAAI,CAAC,qBAAqB;aACtE,CAAC,CAAC;QACL,CAAC;IACH,CAAC;IAED,MAAM,MAAM,GAAG,OAAO,CAAC,MAAM,IAAI,MAAM,CAAC;IACxC,MAAM,MAAM,GAAG,YAAY;QACzB,CAAC,CAAC,WAAW,CAAC,MAAM,EAAE,WAAW,EAAE,OAAO,CAAC,QAAQ,EAAE,OAAO,CAAC,IAAI,KAAK,IAAI,EAAE,MAAM,CAAC;QACnF,CAAC,CAAC,EAAE,CAAC;IACP,MAAM,QAAQ,GAAG,cAAc,CAC7B,MAAM,EACN,KAAK,EACL,KAAK,CAAC,cAAc,EACpB,KAAK,CAAC,YAAY,EAClB,OAAO,CAAC,GAAG,KAAK,IAAI,EACpB,MAAM,CACP,CAAC;IAEF;;;;;;;;;;;;MAYE;IACF,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACtB,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,sBAAsB;YAC5B,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,gBAAgB,MAAM,CAAC,MAAM,4BAA4B;gBACzD,IAAI,MAAM,CAAC,WAAW,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC,IAAI;YAC9E,IAAI,EACF,MAAM,KAAK,MAAM;gBACf,CAAC,CAAC,mFAAmF;gBACrF,CAAC,CAAC,mEAAmE;SAC1E,CAAC,CAAC;IACL,CAAC;IAED;;;;;;;;;MASE;IACF,KAAK,MAAM,KAAK,IAAI,MAAM,EAAE,CAAC;QAC3B,MAAM,IAAI,GAAG,KAAK,CAAC,IAAI,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,KAAK,CAAC,IAAI,CAAC,CAAC,CAAC,CAAC,CAAC;QACjD,IAAI,IAAI,GAAG,CAAC,IAAI,IAAI,GAAG,EAAE,IAAI,CAAC,KAAK,CAAC,YAAY,EAAE,CAAC;YACjD,WAAW,CAAC,IAAI,CAAC;gBACf,IAAI,EAAE,iBAAiB;gBACvB,QAAQ,EAAE,SAAS;gBACnB,OAAO,EACL,eAAe,UAAU,CAAC,KAAK,CAAC,IAAI,CAAC,6CAA6C;oBAClF,uCAAuC,KAAK,CAAC,QAAQ,+BAA+B;gBACtF,IAAI,EACF,mFAAmF;oBACnF,4DAA4D;aAC/D,CAAC,CAAC;QACL,CAAC;IACH,CAAC;IAED;;;;;;;;;;;;;;;;;;;;MAoBE;IACF,KAAK,MAAM,KAAK,IAAI,MAAM,EAAE,CAAC;QAC3B,MAAM,KAAK,GAAG,KAAK,CAAC,QAAQ,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,kBAAkB,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC;QACzE,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC;YAAE,SAAS;QACjC,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,kBAAkB;YACxB,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,GAAG,MAAM,CAAC,KAAK,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,IAAI,KAAK,CAAC,MAAM,KAAK,CAAC,CAAC,CAAC,CAAC,OAAO,CAAC,CAAC,CAAC,MAAM,WAAW;gBACzF,mFAAmF;gBACnF,qBAAqB,KAAK,CAAC,QAAQ,GAAG;YACxC,IAAI,EACF,kFAAkF;gBAClF,iEAAiE;SACpE,CAAC,CAAC;IACL,CAAC;IAED;;;;;;;;;;;;MAYE;IACF,IAAI,YAAY,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,IAAI,QAAQ,CAAC,IAAI,KAAK,CAAC,EAAE,CAAC;QAC7D,WAAW,CAAC,IAAI,CAAC,WAAW,CAAC,KAAK,EAAE,KAAK,CAAC,WAAW,CAAC,CAAC,CAAC;IAC1D,CAAC;IAED,IAAI,QAAQ,CAAC,uBAAuB,EAAE,CAAC;QACrC,WAAW,CAAC,IAAI,CAAC;YACf,IAAI,EAAE,cAAc;YACpB,QAAQ,EAAE,SAAS;YACnB,OAAO,EACL,gDAAgD,qBAAqB,CAAC,cAAc,CAAC,OAAO,CAAC,GAAG;gBAChG,qDAAqD;YACvD,IAAI,EAAE,qFAAqF;SAC5F,CAAC,CAAC;IACL,CAAC;IAED,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,IAAI,EAAE,OAAO,CAAC,IAAI,KAAK,IAAI,EAAE,KAAK,EAAE,WAAW,EAAE,YAAY,EAAE,WAAW,EAAE,QAAQ,EAAE,CAAC;AAClH,CAAC;AAED;;;;;;GAMG;AACH,SAAS,WAAW,CAClB,OAA6B,EAC7B,WAAgC,EAChC,cAAkC,EAClC,IAAa,EACb,MAAuB;IAEvB,MAAM,MAAM,GAAG,IAAI,GAAG,EAAuB,CAAC;IAC9C,KAAK,MAAM,MAAM,IAAI,OAAO,EAAE,CAAC;QAC7B,wEAAwE;QACxE,2EAA2E;QAC3E,IAAI,MAAM,CAAC,gBAAgB,KAAK,CAAC;YAAE,SAAS;QAC5C,MAAM,MAAM,GAAG,MAAM,CAAC,GAAG,CAAC,MAAM,CAAC,YAAY,CAAC,CAAC;QAC/C,IAAI,MAAM;YAAE,MAAM,CAAC,IAAI,CAAC,MAAM,CAAC,CAAC;;YAC3B,MAAM,CAAC,GAAG,CAAC,MAAM,CAAC,YAAY,EAAE,CAAC,MAAM,CAAC,CAAC,CAAC;IACjD,CAAC;IAED,MAAM,KAAK,GAAG,CAAC,GAAG,MAAM,CAAC,IAAI,EAAE,CAAC,CAAC,IAAI,CAAC,CAAC,CAAC,EAAE,CAAC,EAAE,EAAE,CAAC,CAAC,GAAG,CAAC,CAAC,CAAC;IACvD,oFAAoF;IACpF,MAAM,MAAM,GAAG,KAAK,CAAC,MAAM,KAAK,CAAC,IAAI,MAAM,KAAK,MAAM,CAAC;IAEvD;;;;;;;;;;;;;;;;;MAiBE;IACF,MAAM,MAAM,GAAG,IAAI,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC,CAAC,MAAM,CAAC;IACzC,MAAM,KAAK,GAAG,WAAW,CAAC,KAAK,CAAC,CAAC,GAAG,CAAC,CAAC,IAAI,EAAE,EAAE,CAAC,GAAG,IAAI,CAAC,OAAO,CAAC,GAAG,EAAE,GAAG,CAAC,IAAI,CAAC,CAAC;IAC9E,MAAM,IAAI,GAAG,IAAI,GAAG,EAAU,CAAC;IAC/B,MAAM,UAAU,GAAG,CAAC,KAAa,EAAU,EAAE;QAC3C,MAAM,IAAI,GAAG,WAAW,KAAK,CAAC,KAAK,CAAC,EAAE,CAAC;QACvC,IAAI,IAAI,GAAG,GAAG,IAAI,GAAG,MAAM,EAAE,CAAC;QAC9B,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,EAAE,CAAC,EAAE;YAAE,IAAI,GAAG,GAAG,IAAI,IAAI,CAAC,GAAG,MAAM,EAAE,CAAC;QACpE,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,CAAC;QACf,OAAO,IAAI,CAAC;IACd,CAAC,CAAC;IAEF,OAAO,KAAK,CAAC,GAAG,CAAC,CAAC,IAAI,EAAE,KAAK,EAAE,EAAE;QAC/B,MAAM,OAAO,GAAG,MAAM,CAAC,GAAG,CAAC,IAAI,CAAC,IAAI,EAAE,CAAC;QACvC,MAAM,KAAK,GAAG,OAAO,CAAC,CAAC,CAAC,CAAC;QACzB,OAAO;YACL,IAAI;YACJ,gBAAgB,EAAE,KAAK,CAAC,CAAC,CAAC,KAAK,CAAC,gBAAgB,CAAC,CAAC,CAAC,CAAC;YACpD,QAAQ,EAAE,MAAM,CAAC,CAAC,CAAC,UAAU,MAAM,EAAE,CAAC,CAAC,CAAC,UAAU,CAAC,KAAK,CAAC;YACzD;;;;cAIE;YACF,YAAY,EAAE,MAAM,KAAK,MAAM,CAAC,CAAC,CAAC,IAAI,CAAC,GAAG,CAAC,GAAG,KAAK,CAAC,GAAG,CAAC,YAAY,CAAC,CAAC,CAAC,CAAC,CAAC,YAAY,CAAC,IAAI,CAAC;YAC3F,QAAQ,EAAE,OAAO,CAAC,GAAG,CAAC,CAAC,MAAM,EAAE,EAAE,CAAC,CAAC;gBACjC,MAAM;gBACN,MAAM,EAAE,WAAW,CAAC,GAAG,CAAC,MAAM,CAAC,KAAK,CAAC,IAAI,UAAU,MAAM,CAAC,KAAK,EAAE;gBACjE,QAAQ,EAAE,cAAc,IAAI,iBAAiB,CAAC,MAAM,CAAC;aACtD,CAAC,CAAC;SACJ,CAAC;IACJ,CAAC,CAAC,CAAC;AACL,CAAC;AAED;;;;;;GAMG;AACH,MAAM,UAAU,sBAAsB,CAAC,WAAkC;IACvE,OAAO,WAAW,CAAC,MAAM,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,IAAI,KAAK,sBAAsB,CAAC,CAAC;AACtE,CAAC;AAED,gEAAgE;AAChE,MAAM,UAAU,QAAQ,CAAC,IAAY;IACnC,OAAO,GAAG,UAAU,CAAC,IAAI,CAAC,CAAC,OAAO,CAAC,GAAG,EAAE,GAAG,CAAC,IAAI,CAAC;AACnD,CAAC;AAED,mFAAmF;AACnF,SAAS,OAAO,CAAC,SAAiB,EAAE,QAAgB,EAAE,MAAM,GAAG,KAAK;IAClE,MAAM,IAAI,GAAG,IAAI,CAAC,GAAG,CAAC,SAAS,CAAC,CAAC;IACjC,MAAM,IAAI,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;IAC5B,MAAM,QAAQ,GAAG,QAAQ,GAAG,CAAC,CAAC,CAAC,CAAC,CAAC,GAAG,QAAQ,CAAC,CAAC,CAAC,CAAC,CAAC;IAEjD;;;;;;;;;MASE;IACF,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,IAAI,GAAG,CAAC,GAAG,QAAQ,CAAC;IACvD,IAAI,IAAI,GAAG,IAAI;QAAE,OAAO,IAAI,GAAG,IAAI,CAAC,OAAO,CAAC,IAAI,CAAC,GAAG,CAAC,QAAQ,EAAE,GAAG,CAAC,CAAC,CAAC,MAAM,CAAC;IAC5E,OAAO,IAAI,GAAG,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,KAAK,CAAC,IAAI,CAAC,CAAC,GAAG,CAAC,CAAC,GAAG,QAAQ,CAAC;AAC9D,CAAC;AAED;;;;;;;;;;;;;;;;;GAiBG;AACH,SAAS,WAAW,CAAC,KAAoB,EAAE,WAAmB;IAC5D,MAAM,KAAK,GAAG,CAAC,KAAK,CAAC,gBAAgB,CAAC;IACtC,OAAO;QACL,IAAI,EAAE,cAAc;QACpB,QAAQ,EAAE,SAAS;QACnB,OAAO,EAAE,KAAK;YACZ,CAAC,CAAC,gDAAgD,KAAK,CAAC,KAAK,CAAC,YAAY,EAAE,CAAC,CAAC,OAAO;gBACnF,GAAG,KAAK,CAAC,KAAK,CAAC,UAAU,EAAE,CAAC,CAAC,yDAAyD;YACxF,CAAC,CAAC,oBAAoB,WAAW,kDAAkD;gBACjF,8CAA8C;QAClD,IAAI,EAAE,KAAK;YACT,CAAC,CAAC;;;;;;;;;;gBAUE;gBACF,KAAK,CAAC,UAAU,IAAI,KAAK,CAAC,qBAAqB;oBAC/C,CAAC,CAAC,4BAA4B,KAAK,CAAC,KAAK,CAAC,qBAAqB,EAAE,CAAC,CAAC,kBAAkB;wBACnF,mFAAmF;wBACnF,sCAAsC;oBACxC,CAAC,CAAC,iFAAiF;wBACjF,qFAAqF;wBACrF,2BAA2B;YAC/B,CAAC,CAAC,kDAAkD;KACvD,CAAC;AACJ,CAAC;AAED,SAAS,cAAc,CACrB,MAA4B,EAC5B,KAAoB,EACpB,cAAsB,EACtB,YAA6C,EAC7C,GAAY,EACZ,MAAuB;IAEvB,IAAI,IAAI,GAAG,CAAC,CAAC;IACb,IAAI,KAAK,GAAG,CAAC,CAAC;IACd,IAAI,OAAO,GAAG,KAAK,CAAC;IACpB,oFAAoF;IACpF,sFAAsF;IACtF,IAAI,QAAQ,GAAG,CAAC,CAAC;IAEjB,KAAK,MAAM,KAAK,IAAI,MAAM,EAAE,CAAC;QAC3B,IAAI,SAAS,GAAG,CAAC,CAAC;QAClB,KAAK,IAAI,MAAM,GAAG,KAAK,CAAC,WAAW,EAAE,MAAM,GAAG,KAAK,CAAC,SAAS,EAAE,MAAM,EAAE,EAAE,CAAC;YACxE,MAAM,WAAW,GAAG,YAAY;gBAC9B,CAAC,CAAC,CAAC,YAAY,CAAC,MAAM,CAAC,IAAI,MAAM,GAAG,cAAc,CAAC;gBACnD,CAAC,CAAC,MAAM,GAAG,cAAc,CAAC;YAC5B,SAAS,IAAI,mBAAmB,CAAC;gBAC/B,WAAW;gBACX,IAAI,EAAE,KAAK,CAAC,IAAI;gBAChB,gBAAgB,EAAE,KAAK,CAAC,gBAAgB;gBACxC,YAAY,EAAE,KAAK,CAAC,YAAY;gBAChC,UAAU,EAAE,KAAK,CAAC,UAAU;aAC7B,CAAC,CAAC;QACL,CAAC;QACD,IAAI,MAAM,KAAK,MAAM,EAAE,CAAC;YACtB,kEAAkE;YAClE,MAAM,UAAU,GAAG,SAAS,GAAG,KAAK,CAAC,QAAQ,CAAC,MAAM,CAAC;YACrD,IAAI,IAAI,UAAU,CAAC;YACnB,QAAQ,IAAI,UAAU,CAAC;YACvB;;;;cAIE;YACF,MAAM,SAAS,GAAG,OAAO,CAAC,KAAK,CAAC,UAAU,EAAE,KAAK,CAAC,YAAY,CAAC,CAAC;YAChE,KAAK,MAAM,OAAO,IAAI,KAAK,CAAC,QAAQ,EAAE,CAAC;gBACrC,MAAM,UAAU,GAAG,OAAO,CACxB,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,OAAO,CAAC,MAAM,CAAC,WAAW,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,OAAO,CAAC,MAAM,CAAC,WAAW,CAAC,CAAC,EACpF,OAAO,CAAC,QAAQ,EAChB,OAAO,CAAC,MAAM,CAAC,WAAW,GAAG,CAAC,IAAI,OAAO,CAAC,MAAM,CAAC,WAAW,GAAG,CAAC,CACjE,CAAC;gBACF,MAAM,SAAS,GAAG,MAAM,CAAC,UAAU,CAAC,cAAc,CAAC,OAAO,CAAC,MAAM,CAAC,CAAC,CAAC;gBACpE,8BAA8B;gBAC9B,KAAK,IAAI,SAAS,GAAG,CAAC,SAAS,GAAG,SAAS,GAAG,UAAU,GAAG,CAAC,CAAC,CAAC;YAChE,CAAC;YACD,SAAS;QACX,CAAC;QAED,IAAI,IAAI,SAAS,CAAC;QAClB,IAAI,SAAS,GAAG,CAAC,GAAG,qBAAqB;YAAE,OAAO,GAAG,IAAI,CAAC;QAE1D;;;;;;;;;;;;;;;;UAgBE;QACF,MAAM,SAAS,GAAG,OAAO,CAAC,KAAK,CAAC,UAAU,EAAE,KAAK,CAAC,YAAY,CAAC,CAAC;QAChE,MAAM,SAAS,GAAG,KAAK,CAAC,QAAQ,CAAC,MAAM,CACrC,CAAC,GAAG,EAAE,CAAC,EAAE,EAAE,CACT,GAAG;YACH,OAAO,CACL,IAAI,CAAC,GAAG,CAAC,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,MAAM,CAAC,WAAW,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,CAAC,MAAM,CAAC,WAAW,CAAC,CAAC,EACxE,CAAC,CAAC,QAAQ,EACV,CAAC,CAAC,MAAM,CAAC,WAAW,GAAG,CAAC,IAAI,CAAC,CAAC,MAAM,CAAC,WAAW,GAAG,CAAC,CACrD,EACH,CAAC,CACF,CAAC;QACF,2CAA2C;QAC3C,KAAK,IAAI,SAAS,GAAG,CAAC,SAAS,GAAG,SAAS,GAAG,KAAK,CAAC,QAAQ,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC;QACzE;;;;;;;;;;;UAWE;QACF,KAAK,IAAI,MAAM,CAAC,UAAU,CAAC,MAAM,CAAC,CAAC,QAAQ,EAAE,GAAG,KAAK,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QAC3F,mFAAmF;QACnF,sFAAsF;QACtF,IAAI,GAAG;YAAE,KAAK,IAAI,SAAS,CAAC;IAC9B,CAAC;IAED,IAAI,MAAM,KAAK,MAAM,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QAC3C,IAAI,QAAQ,GAAG,CAAC,GAAG,qBAAqB;YAAE,OAAO,GAAG,IAAI,CAAC;QACzD,KAAK,IAAI,MAAM,CAAC,UAAU,CAAC,MAAM,CAAC,CAAC,QAAQ,EAAE,SAAS,EAAE,OAAO,CAAC,CAAC,CAAC,GAAG,CAAC,CAAC;QACvE,IAAI,GAAG;YAAE,KAAK,IAAI,SAAS,CAAC;IAC9B,CAAC;IAED,OAAO,EAAE,IAAI,EAAE,KAAK,EAAE,uBAAuB,EAAE,OAAO,EAAE,CAAC;AAC3D,CAAC","sourcesContent":["/**\n * Turning a request into a concrete conversion plan.\n *\n * The plan is where the tool's central promise is enforced: channels recorded at\n * different sampling rates are never merged into one table. A single wide CSV can\n * only hold mixed rates by inventing samples for the slow channels — MNE, for\n * instance, expands three genuine 1 Hz temperature readings into 768 interpolated\n * values without warning. Instead each distinct rate gets its own file, so every\n * number in every output file is a number that was actually recorded.\n */\n\nimport type { Diagnostic } from '../edf/errors.js';\nimport type { EdfSignal } from '../edf/header.js';\nimport { formatRate, formatRates } from '../edf/header.js';\nimport { decimalsAreClamped, decimalsForSignal } from '../edf/scale.js';\nimport { UTF8_BOM, csvRow, escapeCsvField } from '../format/csv.js';\nimport { listed } from '../format/list.js';\nimport { fixed, timeDecimals } from '../format/number.js';\nimport { buildColumnNames, renamedByCollision, selectChannels } from './channels.js';\nimport { assertOptions } from './options.js';\nimport { countSamplesInRange, resolveRange } from './time-range.js';\nimport type { ResolvedRange } from './time-range.js';\n\nexport interface PlannedChannel {\n  signal: EdfSignal;\n  column: string;\n  decimals: number;\n}\n\nexport interface RateGroup {\n  /** Sampling rate in Hz shared by every channel in this group. */\n  rate: number;\n  samplesPerRecord: number;\n  fileName: string;\n  timeDecimals: number;\n  channels: PlannedChannel[];\n}\n\nexport interface PlanInput {\n  signals: readonly EdfSignal[];\n  recordDuration: number;\n  recordCount: number;\n  hasAnnotationChannel: boolean;\n  /**\n   * True start time of each data record, supplied for discontinuous files. The\n   * requested time window is resolved against these rather than against\n   * `recordCount * recordDuration`, which for a file with gaps is the amount of\n   * data rather than the span of time it covers.\n   */\n  recordStarts?: Float64Array | null | undefined;\n}\n\nexport interface PlanOptions {\n  channels?: readonly string[] | undefined;\n  start?: number | undefined;\n  /** The `--start` value exactly as typed, for error messages. */\n  startText?: string | undefined;\n  duration?: number | undefined;\n  end?: number | undefined;\n  /** The `--end` value exactly as typed, for error messages. */\n  endText?: string | undefined;\n  annotationsOnly?: boolean | undefined;\n  /** Force a fixed number of decimals instead of deriving it per channel. */\n  decimals?: number | undefined;\n  /** Compress each CSV with gzip, giving every one of them a `.gz` name. */\n  gzip?: boolean | undefined;\n  /** Start each CSV with a UTF-8 byte order mark, so Excel reads it as UTF-8. */\n  bom?: boolean | undefined;\n  /**\n   * How the samples are arranged in the CSV.\n   *\n   * `'wide'`, the default, gives one column per channel and one file per sampling rate.\n   * `'long'` gives one file, three columns — `time_s`, `channel`, `value` — and one row per\n   * sample. See ConversionPlan.layout for why that is the only way to put channels recorded\n   * at different rates in one table without inventing samples.\n   */\n  layout?: 'wide' | 'long' | undefined;\n}\n\nexport interface ConversionPlan {\n  groups: RateGroup[];\n  /**\n   * How the samples are arranged. `'wide'` is a column per channel and a file per rate;\n   * `'long'` is `time_s,channel,value`, one row per sample, all rates in one file.\n   *\n   * The wide layout has to split a mixed-rate recording across files: a 100 Hz channel and\n   * a 1 Hz channel share no rows, and putting them in one wide table means either 99 empty\n   * cells out of every hundred or inventing the samples that would fill them. In the long\n   * layout each sample carries its own time, so nothing has to line up and nothing is\n   * invented — which also makes it the one layout `--stdout` can stream for such a file.\n   */\n  layout: 'wide' | 'long';\n\n  /**\n   * Whether the CSVs will be compressed.\n   *\n   * Recorded rather than inferred from the group file names. Under `--annotations-only`\n   * there are no groups to read it off, and `--info` named `annotations.csv` for a run that\n   * wrote `annotations.csv.gz`.\n   */\n  gzip: boolean;\n  range: ResolvedRange;\n  columnNames: Map<number, string>;\n  writeSignals: boolean;\n  diagnostics: Diagnostic[];\n  estimate: OutputEstimate;\n}\n\nexport interface OutputEstimate {\n  /** Total data rows across every signal file. */\n  rows: number;\n  /** Approximate size of the signal CSVs on disk. */\n  bytes: number;\n  /** True when any single file would exceed Excel's row limit. */\n  exceedsSpreadsheetLimit: boolean;\n}\n\nconst BOM_BYTES = Buffer.byteLength(UTF8_BOM);\n\n/** Excel and most spreadsheet tools stop at 1,048,576 rows including the header. */\nexport const SPREADSHEET_ROW_LIMIT = 1_048_576;\n\nexport function buildPlan(input: PlanInput, options: PlanOptions = {}): ConversionPlan {\n  // First, and before a directory is created or a stream opened, so a rejected option\n  // leaves nothing behind. See assertOptions for what used to get through.\n  assertOptions(options);\n\n  const diagnostics: Diagnostic[] = [];\n  const columnNames = buildColumnNames(input.signals);\n\n  // A channel whose own label was taken by another channel's disambiguating suffix. The\n  // duplicate-label warning is about the labels that collided; this is about the channel\n  // that lost its name to them, which is the one whose column no longer matches the file.\n  for (const signal of renamedByCollision(input.signals, columnNames)) {\n    diagnostics.push({\n      code: 'DUPLICATE_LABEL',\n      severity: 'warning',\n      message:\n        `Signal ${signal.index} is labelled \"${signal.label}\", which is also the column name ` +\n        `another channel's \"_ch\" suffix produces, so its column is \"${columnNames.get(signal.index)}\".`,\n      hint: 'Column names are unique; look this channel up in channels.csv by its signal_index.',\n    });\n  }\n\n  const range = resolveRange({\n    start: options.start,\n    startText: options.startText,\n    duration: options.duration,\n    end: options.end,\n    endText: options.endText,\n    recordDuration: input.recordDuration,\n    recordCount: input.recordCount,\n    recordStarts: input.recordStarts,\n  });\n\n  const writeSignals = options.annotationsOnly !== true;\n\n  let chosen: EdfSignal[] = input.signals.filter((s) => !s.isAnnotations);\n\n  /*\n    Channel names are checked even under --annotations-only, where the selection is not\n    otherwise used.\n\n    Skipping the check meant `--channels TYPO --annotations-only` exited 0 in silence while\n    the same typo without the flag was a usage error, and `--channels \"\"` stayed an error\n    in both — so a mistyped name was the one form of bad input the tool accepted quietly.\n    Everywhere else a term matching nothing is reported rather than ignored; a flag that\n    happens not to apply is a poor reason to make an exception.\n  */\n  if (options.channels && options.channels.length > 0) {\n    const selection = selectChannels(input.signals, options.channels);\n    if (writeSignals) chosen = selection.signals;\n    for (const { term, matched } of selection.ambiguous) {\n      diagnostics.push({\n        code: 'DUPLICATE_LABEL',\n        severity: 'warning',\n        message:\n          `\"${term}\" matches ${matched.length} channels (positions ` +\n          `${listed(matched.map((s) => `#${s.index}`))}); all of them were selected.`,\n        hint: `Use --channels \"#${matched[0]?.index ?? 0}\" to pick just one.`,\n      });\n    }\n  }\n\n  const layout = options.layout ?? 'wide';\n  const groups = writeSignals\n    ? groupByRate(chosen, columnNames, options.decimals, options.gzip === true, layout)\n    : [];\n  const estimate = estimateOutput(\n    groups,\n    range,\n    input.recordDuration,\n    input.recordStarts,\n    options.bom === true,\n    layout,\n  );\n\n  /*\n    The mixed-rate warning describes what this conversion does, not what the file holds.\n\n    The header parser raises its own, which is right for `parseHeader` — but it sees every\n    channel and knows nothing about `--channels`. Converting one channel out of a three-rate\n    recording therefore announced \"3 different sampling rates ... written to one file per\n    rate\" over a run that wrote one file, in the same output where `--info` had already\n    marked the other two \"(not selected)\". Selecting two of the three was wrong the other\n    way: still \"3\".\n\n    Callers combining these with a file's own diagnostics drop that copy in favour of this\n    one; see `withoutFileRateWarning`.\n  */\n  if (groups.length > 1) {\n    diagnostics.push({\n      code: 'MIXED_SAMPLING_RATES',\n      severity: 'warning',\n      message:\n        `Channels use ${groups.length} different sampling rates ` +\n        `(${listed(formatRates(groups.map((g) => g.rate)).map((r) => `${r} Hz`))}).`,\n      hint:\n        layout === 'long'\n          ? 'They share one table, each row carrying its own time, so no channel is resampled.'\n          : 'They are written to one file per rate so no channel is resampled.',\n    });\n  }\n\n  /*\n    A time column that cannot tell two samples apart.\n\n    Sample times are written to at most nine decimal places, which separates everything up to\n    a gigahertz. Below that the column repeats: a recording of 1 ns records holding ten\n    samples each writes twenty rows carrying three distinct times, so joining or plotting on\n    `time_s` silently collapses them. Nothing is lost from the file — every sample is there,\n    in order — but the column stops being an identifier, and that is worth saying rather than\n    leaving to be discovered.\n  */\n  for (const group of groups) {\n    const step = group.rate > 0 ? 1 / group.rate : 0;\n    if (step > 0 && step < 10 ** -group.timeDecimals) {\n      diagnostics.push({\n        code: 'TIME_RESOLUTION',\n        severity: 'warning',\n        message:\n          `Channels at ${formatRate(group.rate)} Hz sample faster than the time column can ` +\n          `distinguish, so consecutive rows in ${group.fileName} carry the same time_s value.`,\n        hint:\n          'Every sample is written, in order. Use the row number rather than time_s to tell ' +\n          'them apart, or convert one rate at a time with --channels.',\n      });\n    }\n  }\n\n  /*\n    The same failure as TIME_RESOLUTION, one column over.\n\n    A channel whose quantization step is below 1e-98 needs more decimals than `toFixed` can\n    print, so consecutive digital codes round to the same text and the arithmetic the FAQ\n    gives for recovering them stops working. That used to happen at 1e-20 and silently — see\n    MAX_DERIVED_DECIMALS. It is rare now, but \"rare\" is the reason to say so rather than the\n    reason not to.\n\n    Asked of the ceiling, not of the precision in use, and so asked whatever `--decimals`\n    says. `--decimals 2` on a channel needing 3 is a trade the caller made knowingly, and\n    reporting it was reporting the flag back at the person who typed it — every channel of an\n    ordinary EEG raised this, and since --strict turns any diagnostic into exit 1,\n    `--decimals 2 --strict` could not succeed on any recording at all.\n\n    0.5.10 fixed that by skipping the check whenever `--decimals` was given, which suppressed\n    the real case along with the false one: at `--decimals 20` a channel stepping by 1e-106\n    printed every code it had as `0.00000000000000000000`, and said nothing. The question is\n    not who chose the precision. It is whether any precision the tool can print would\n    separate consecutive codes.\n  */\n  for (const group of groups) {\n    const short = group.channels.filter((c) => decimalsAreClamped(c.signal));\n    if (short.length === 0) continue;\n    diagnostics.push({\n      code: 'VALUE_RESOLUTION',\n      severity: 'warning',\n      message:\n        `${listed(short.map((c) => c.column))} ${short.length === 1 ? 'steps' : 'step'} by less ` +\n        `than any number of decimals this can print, so some consecutive samples round to ` +\n        `the same value in ${group.fileName}.`,\n      hint:\n        'Every sample is written, in order, and the physical values are computed at full ' +\n        'precision either way. What is lost is only in the printed text.',\n    });\n  }\n\n  /*\n    A window that selects nothing is a fact about the plan, so the plan is where it is raised.\n\n    It was pushed by `convert()` from the rows actually written, which meant `--info` never\n    said it: `--info --start 0.31 --end 0.39` on a 10 Hz recording printed \"Would write 0\n    rows\" with no warning and exited 0 under `--strict`, while converting the same window\n    warned and exited 1. The hint says \"Run with --info to see where the records actually\n    sit\" — advising the reader into the one mode that would not tell them.\n\n    The estimate's row count is exact, which `npm run estimate` checks across every fixture\n    crossed with every option set, so raising it from the plan says the same thing the rows\n    would have.\n  */\n  if (writeSignals && groups.length > 0 && estimate.rows === 0) {\n    diagnostics.push(emptyWindow(range, input.recordCount));\n  }\n\n  if (estimate.exceedsSpreadsheetLimit) {\n    diagnostics.push({\n      code: 'LARGE_OUTPUT',\n      severity: 'warning',\n      message:\n        `At least one output file will have more than ${SPREADSHEET_ROW_LIMIT.toLocaleString('en-US')} ` +\n        `rows, which is more than Excel or Numbers can open.`,\n      hint: 'Use --start and --duration to convert a section, or read the file with pandas or R.',\n    });\n  }\n\n  return { groups, layout, gzip: options.gzip === true, range, columnNames, writeSignals, diagnostics, estimate };\n}\n\n/**\n * Partition channels by sampling rate, largest first.\n *\n * The common case — every channel at one rate — collapses to a single group and a\n * single `signals.csv`, so the honest behaviour costs nothing when there is nothing\n * to be honest about.\n */\nfunction groupByRate(\n  signals: readonly EdfSignal[],\n  columnNames: Map<number, string>,\n  forcedDecimals: number | undefined,\n  gzip: boolean,\n  layout: 'wide' | 'long',\n): RateGroup[] {\n  const byRate = new Map<number, EdfSignal[]>();\n  for (const signal of signals) {\n    // A channel with no samples has no sampling rate to group by, and would\n    // otherwise produce an empty \"0hz\" file. The header parser already warned.\n    if (signal.samplesPerRecord === 0) continue;\n    const bucket = byRate.get(signal.samplingRate);\n    if (bucket) bucket.push(signal);\n    else byRate.set(signal.samplingRate, [signal]);\n  }\n\n  const rates = [...byRate.keys()].sort((a, b) => b - a);\n  // The long layout writes one table whatever the rates are, so every group names it.\n  const single = rates.length === 1 || layout === 'long';\n\n  /*\n    Two distinct rates can produce the same slug, because the slug rounds to six decimal\n    places. Rates come from samplesPerRecord / recordDuration and every channel shares the\n    record duration, so the closest two rates can be is 1 / recordDuration — which drops\n    below 1e-6 once a record is longer than about eleven days. Absurd, but the header\n    permits it, and the failure was silent and destructive: both groups opened a write\n    stream on the same path, so the file ended up holding interleaved rows from both\n    channels under a header naming only one of them.\n\n    Distinct rates therefore get distinct files, always. The suffix is only ever reached by\n    a collision, so ordinary recordings keep the names they have always had.\n\n    Naming from the whole set of rates at once removes most of those collisions before the\n    suffix has to. Rounding each rate on its own gave 1e-6 Hz and 1.25e-6 Hz the same slug,\n    and the numbering below then produced signals_0_000001hz.csv and signals_0_000001hz_2.csv\n    — two files that no longer overwrite each other, but of which only one is named for the\n    rate it holds. The suffix stays as the backstop for anything this still cannot separate.\n  */\n  const suffix = gzip ? '.csv.gz' : '.csv';\n  const slugs = formatRates(rates).map((text) => `${text.replace('.', '_')}hz`);\n  const used = new Set<string>();\n  const uniqueName = (index: number): string => {\n    const base = `signals_${slugs[index]}`;\n    let name = `${base}${suffix}`;\n    for (let n = 2; used.has(name); n++) name = `${base}_${n}${suffix}`;\n    used.add(name);\n    return name;\n  };\n\n  return rates.map((rate, index) => {\n    const members = byRate.get(rate) ?? [];\n    const first = members[0];\n    return {\n      rate,\n      samplesPerRecord: first ? first.samplesPerRecord : 0,\n      fileName: single ? `signals${suffix}` : uniqueName(index),\n      /*\n        In the long layout every rate shares a `time_s` column, so they share its precision:\n        the finest any of them needs. Writing 100 Hz at three places and 256 Hz at eight in\n        the same column would make the column's meaning depend on the row.\n      */\n      timeDecimals: layout === 'long' ? Math.max(...rates.map(timeDecimals)) : timeDecimals(rate),\n      channels: members.map((signal) => ({\n        signal,\n        column: columnNames.get(signal.index) ?? `signal_${signal.index}`,\n        decimals: forcedDecimals ?? decimalsForSignal(signal),\n      })),\n    };\n  });\n}\n\n/**\n * A file's diagnostics with the header's mixed-rate warning removed.\n *\n * `buildPlan` raises that warning for the channels actually being converted, so keeping both\n * would either duplicate it or contradict it. The header parser's copy stays where it is, for\n * callers reading a header without planning a conversion.\n */\nexport function withoutFileRateWarning(diagnostics: readonly Diagnostic[]): Diagnostic[] {\n  return diagnostics.filter((d) => d.code !== 'MIXED_SAMPLING_RATES');\n}\n\n/** `256hz`, `12_5hz` — safe in a filename on every platform. */\nexport function rateSlug(rate: number): string {\n  return `${formatRate(rate).replace('.', '_')}hz`;\n}\n\n/** Characters a fixed-decimal number of this magnitude occupies, sign included. */\nfunction widthOf(magnitude: number, decimals: number, signed = false): number {\n  const size = Math.abs(magnitude);\n  const sign = signed ? 1 : 0;\n  const fraction = decimals > 0 ? 1 + decimals : 0;\n\n  /*\n    Cells are written with toFixed, which rounds. Taking the integer digits from the floor of\n    the bound therefore under-counted whenever rounding carried into a new digit: a channel\n    bounded at 9999.999 and written to zero decimals produces \"10000\", five characters where\n    the floor of 9999.999 suggests four. Every cell on such a channel was a byte short, and\n    `--info` reported 127 KB for a file that came out 131 KB.\n\n    Measuring the bound as rendered removes that. toFixed switches to exponential notation\n    past 1e21, so the arithmetic form still covers magnitudes beyond it.\n  */\n  if (!Number.isFinite(size)) return sign + 1 + fraction;\n  if (size < 1e21) return sign + size.toFixed(Math.min(decimals, 100)).length;\n  return sign + (Math.floor(Math.log10(size)) + 1) + fraction;\n}\n\n/**\n * Raised when the conversion had signal tables to fill and put no data rows in any of them.\n *\n * A window can land where there are no samples without being past the end of the recording:\n * between the last sample and the nominal end of the last record, or — on a discontinuous\n * file — inside a gap. `--start 2 --end 10` on a recording whose records sit at 0s, 1s and\n * 10s asks for eight seconds that contain no data at all.\n *\n * What came out was a signals.csv holding its header and nothing else, exit 0, no warning,\n * and `--strict` passing. The closing summary does say \"signals.csv 0 rows\" and --json\n * carries `rows: 0`, so it was not quite invisible — but a header-only file is exactly what\n * a successful extraction of an empty range looks like, and everywhere else that a request\n * produces nothing this tool says so: a --channels term matching nothing is an error, and\n * --annotations-only on a file with no events raises NO_ANNOTATIONS. A warning rather than\n * an error because a batch of five hundred recordings should not stop for one whose gap\n * happens to line up with the window; --strict turns it into a failure for those who want\n * that.\n */\nfunction emptyWindow(range: ResolvedRange, recordCount: number): Diagnostic {\n  const asked = !range.isWholeRecording;\n  return {\n    code: 'EMPTY_WINDOW',\n    severity: 'warning',\n    message: asked\n      ? `No samples fall inside the requested window (${fixed(range.startSeconds, 3)}s to ` +\n        `${fixed(range.endSeconds, 3)}s), so the signal files hold their headers and no data.`\n      : `This recording's ${recordCount} data records carry no samples in range, so the ` +\n        `signal files hold their headers and no data.`,\n    hint: asked\n      ? /*\n          Which of the two it was, rather than the second one always.\n\n          A recording does not have to start at zero: its first record's timekeeping TAL is\n          what it is timed from, so a file whose records begin at 1000s is asked for with\n          `--start 1000`. `--start 0 --end 1` on that file was told \"The window is inside the\n          recording but lands where there is no data — past the last sample, or inside a gap\n          in a discontinuous file\", when the window sits entirely before the recording and\n          neither offered explanation applies to it. A start at or past the *end* is already\n          an error, so the window being outside can only mean it is before the beginning.\n        */\n        range.endSeconds <= range.recordingStartSeconds\n        ? `This recording starts at ${fixed(range.recordingStartSeconds, 3)}s, so the whole ` +\n          'window sits before it. --start and --end are read on the recording\\'s own clock, ' +\n          'which --info prints as \"Timed from\".'\n        : 'The window is inside the recording but lands where there is no data — past the ' +\n          'last sample, or inside a gap in a discontinuous file. Run with --info to see where ' +\n          'the records actually sit.'\n      : 'Run with --info to see what the header declares.',\n  };\n}\n\nfunction estimateOutput(\n  groups: readonly RateGroup[],\n  range: ResolvedRange,\n  recordDuration: number,\n  recordStarts: Float64Array | null | undefined,\n  bom: boolean,\n  layout: 'wide' | 'long',\n): OutputEstimate {\n  let rows = 0;\n  let bytes = 0;\n  let exceeds = false;\n  // One table in the long layout, so the row limit applies to the sum rather than the\n  // largest group, and the header and mark are counted once rather than once per group.\n  let longRows = 0;\n\n  for (const group of groups) {\n    let groupRows = 0;\n    for (let record = range.startRecord; record < range.endRecord; record++) {\n      const recordStart = recordStarts\n        ? (recordStarts[record] ?? record * recordDuration)\n        : record * recordDuration;\n      groupRows += countSamplesInRange({\n        recordStart,\n        rate: group.rate,\n        samplesPerRecord: group.samplesPerRecord,\n        startSeconds: range.startSeconds,\n        endSeconds: range.endSeconds,\n      });\n    }\n    if (layout === 'long') {\n      // A row per sample per channel rather than a row per sample time.\n      const groupCells = groupRows * group.channels.length;\n      rows += groupCells;\n      longRows += groupCells;\n      /*\n        `time_s,channel,value`: the time, the channel name as it will be escaped into the\n        cell, and the widest the value can print. Same over-counting rule as the wide\n        layout — the declared physical range bounds a cell, and most samples sit under it.\n      */\n      const timeWidth = widthOf(range.endSeconds, group.timeDecimals);\n      for (const channel of group.channels) {\n        const valueWidth = widthOf(\n          Math.max(Math.abs(channel.signal.physicalMin), Math.abs(channel.signal.physicalMax)),\n          channel.decimals,\n          channel.signal.physicalMin < 0 || channel.signal.physicalMax < 0,\n        );\n        const nameWidth = Buffer.byteLength(escapeCsvField(channel.column));\n        // Two commas and the newline.\n        bytes += groupRows * (timeWidth + nameWidth + valueWidth + 3);\n      }\n      continue;\n    }\n\n    rows += groupRows;\n    if (groupRows + 1 > SPREADSHEET_ROW_LIMIT) exceeds = true;\n\n    /*\n      Width per cell, from the channel's own calibration rather than a flat allowance.\n\n      The old `decimals + 6` budgeted six characters for the sign, integer part and decimal\n      point on every channel, whatever it actually held. That over-counted a millivolt\n      channel spanning ±5 by four characters a cell and ran 30-55% high across the fixture\n      set — on a number people use to decide whether a conversion is worth starting.\n\n      The channel's declared physical range is what bounds a cell, so that bound is what is\n      used. Most samples sit below it, so this still reads high, which is the direction a\n      size estimate should err in.\n\n      One case is outside the bound rather than under it: nothing obliges a recording to keep\n      its samples inside the digital range it declares, and one that does not maps outside the\n      physical range too. Such a file can convert larger than the estimate. Clamping the data\n      to make the estimate true is not a trade worth making — the samples are what they are.\n    */\n    const timeWidth = widthOf(range.endSeconds, group.timeDecimals);\n    const cellWidth = group.channels.reduce(\n      (sum, c) =>\n        sum +\n        widthOf(\n          Math.max(Math.abs(c.signal.physicalMin), Math.abs(c.signal.physicalMax)),\n          c.decimals,\n          c.signal.physicalMin < 0 || c.signal.physicalMax < 0,\n        ),\n      0,\n    );\n    // One comma per channel, plus the newline.\n    bytes += groupRows * (timeWidth + cellWidth + group.channels.length + 1);\n    /*\n      The header row, measured as it will be written rather than as the labels are stored.\n\n      A column name is quoted when it contains a comma, a quote, a newline or a leading or\n      trailing space, and every quote inside it is doubled. Counting the raw label under-counted\n      that row: three channels labelled `a,b,c,d,e`, `x\"y` and `plain` write a 32-byte header\n      and were budgeted 27. EDF labels are free text, so commas in them are ordinary — a montage\n      written as `EEG Fpz-Cz, ref` is exactly the kind of thing this is for.\n\n      csvRow is the function that writes it, so it is the function that measures it. Nothing\n      else is in a position to stay correct when the quoting rules change.\n    */\n    bytes += Buffer.byteLength(csvRow(['time_s', ...group.channels.map((c) => c.column)])) + 1;\n    // Three bytes per file under --bom. Small, but the estimate promises never to read\n    // under what gets written, and a one-row conversion is small enough for it to matter.\n    if (bom) bytes += BOM_BYTES;\n  }\n\n  if (layout === 'long' && groups.length > 0) {\n    if (longRows + 1 > SPREADSHEET_ROW_LIMIT) exceeds = true;\n    bytes += Buffer.byteLength(csvRow(['time_s', 'channel', 'value'])) + 1;\n    if (bom) bytes += BOM_BYTES;\n  }\n\n  return { rows, bytes, exceedsSpreadsheetLimit: exceeds };\n}\n"]}

package/dist/convert/time-range.js

@@ -181,8 +181,20 @@ export function resolveRange(options) {
           The typed value keeps `quoted`, since that is the user's own text and should come
           back exactly as they wrote it.
         */
-        `--start ${quoted(options.startText, startSeconds)} is at or past the end of this ` +
-            `${formatDuration(latest)} recording.`);
+        /*
+          `latest` is where the recording ends on its own clock, which is its length only when
+          it starts at zero. A file timed from its first record's timekeeping TAL need not: one
+          whose records run 1000s to 1003s is three seconds long, and this called it "this
+          16m 43s recording" — while --info two lines away said "Duration 3s". Where the
+          recording sits is the useful thing to say in that case, and it is the number --start
+          has to be given.
+        */
+        earliest === 0
+            ? `--start ${quoted(options.startText, startSeconds)} is at or past the end of this ` +
+                `${formatDuration(latest)} recording.`
+            : `--start ${quoted(options.startText, startSeconds)} is at or past the end of this ` +
+                `${formatDuration(latest - earliest)} recording, which runs from ` +
+                `${formatSeconds(earliest)} to ${formatSeconds(latest)}.`);
     }
     if (endSeconds <= startSeconds) {
         // Quote whatever the caller actually gave, for the same reason as the error above. The

package/dist/convert/time-range.js.map

@@ -1 +1 @@
-{"version":3,"file":"time-range.js","sourceRoot":"","sources":["../../src/convert/time-range.ts"],"names":[],"mappings":"AAAA;;;;;;;GAOG;AAEH,OAAO,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AAErD,MAAM,OAAO,cAAe,SAAQ,KAAK;IACvC,YAAY,OAAe;QACzB,KAAK,CAAC,OAAO,CAAC,CAAC;QACf,IAAI,CAAC,IAAI,GAAG,gBAAgB,CAAC;IAC/B,CAAC;CACF;AAED,MAAM,YAAY,GAA2B;IAC3C,CAAC,EAAE,IAAI;IACP,EAAE,EAAE,IAAI;IACR,GAAG,EAAE,IAAI;IACT,IAAI,EAAE,IAAI;IACV,KAAK,EAAE,IAAI;IACX,CAAC,EAAE,EAAE;IACL,GAAG,EAAE,EAAE;IACP,IAAI,EAAE,EAAE;IACR,MAAM,EAAE,EAAE;IACV,OAAO,EAAE,EAAE;IACX,CAAC,EAAE,CAAC;IACJ,GAAG,EAAE,CAAC;IACN,IAAI,EAAE,CAAC;IACP,MAAM,EAAE,CAAC;IACT,OAAO,EAAE,CAAC;IACV,EAAE,EAAE,KAAK;CACV,CAAC;AAEF,MAAM,KAAK,GAAG,6CAA6C,CAAC;AAC5D,MAAM,UAAU,GAAG,+BAA+B,CAAC;AAEnD;;;;GAIG;AACH,MAAM,UAAU,aAAa,CAAC,KAAa,EAAE,UAAkB;IAC7D,MAAM,IAAI,GAAG,KAAK,CAAC,IAAI,EAAE,CAAC,WAAW,EAAE,CAAC;IACxC,IAAI,IAAI,KAAK,EAAE,EAAE,CAAC;QAChB,MAAM,IAAI,cAAc,CAAC,GAAG,UAAU,mDAAmD,CAAC,CAAC;IAC7F,CAAC;IAED,6BAA6B;IAC7B,IAAI,kBAAkB,CAAC,IAAI,CAAC,IAAI,CAAC;QAAE,OAAO,YAAY,CAAC,MAAM,CAAC,IAAI,CAAC,EAAE,UAAU,EAAE,KAAK,CAAC,CAAC;IAExF,iCAAiC;IACjC,MAAM,KAAK,GAAG,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;IAC/B,IAAI,KAAK,EAAE,CAAC;QACV,MAAM,KAAK,GAAG,KAAK,CAAC,CAAC,CAAC,KAAK,SAAS,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;QAC5D,MAAM,OAAO,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;QACjC,MAAM,OAAO,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;QACjC,IAAI,OAAO,IAAI,EAAE,IAAI,OAAO,IAAI,EAAE,EAAE,CAAC;YACnC,MAAM,IAAI,cAAc,CACtB,GAAG,UAAU,KAAK,KAAK,iDAAiD,CACzE,CAAC;QACJ,CAAC;QACD,OAAO,YAAY,CAAC,KAAK,GAAG,IAAI,GAAG,OAAO,GAAG,EAAE,GAAG,OAAO,EAAE,UAAU,EAAE,KAAK,CAAC,CAAC;IAChF,CAAC;IAED,kCAAkC;IAClC,UAAU,CAAC,SAAS,GAAG,CAAC,CAAC;IACzB,IAAI,KAAK,GAAG,CAAC,CAAC;IACd,IAAI,OAAO,GAAG,CAAC,CAAC;IAChB,IAAI,QAAQ,GAAG,CAAC,CAAC;IACjB,IAAI,KAA6B,CAAC;IAClC,qFAAqF;IACrF,MAAM,IAAI,GAAG,IAAI,GAAG,EAAU,CAAC;IAC/B,OAAO,CAAC,KAAK,GAAG,UAAU,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC,KAAK,IAAI,EAAE,CAAC;QAChD,MAAM,MAAM,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;QAChC,MAAM,IAAI,GAAG,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC;QAC5B,MAAM,KAAK,GAAG,YAAY,CAAC,IAAI,CAAC,CAAC;QACjC,IAAI,KAAK,KAAK,SAAS,EAAE,CAAC;YACxB,MAAM,IAAI,cAAc,CACtB,GAAG,UAAU,KAAK,KAAK,2BAA2B,IAAI,wBAAwB,CAC/E,CAAC;QACJ,CAAC;QAED,iFAAiF;QACjF,qFAAqF;QACrF,qFAAqF;QACrF,IAAI,IAAI,CAAC,GAAG,CAAC,KAAK,CAAC,EAAE,CAAC;YACpB,MAAM,IAAI,cAAc,CACtB,GAAG,UAAU,KAAK,KAAK,+BAA+B;gBACpD,sCAAsC,CACzC,CAAC;QACJ,CAAC;QACD,IAAI,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC;QAEhB,KAAK,IAAI,MAAM,GAAG,KAAK,CAAC;QACxB,OAAO,EAAE,CAAC;QACV,QAAQ,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC;IAC9B,CAAC;IAED,8DAA8D;IAC9D,IAAI,OAAO,KAAK,CAAC,IAAI,QAAQ,KAAK,IAAI,CAAC,OAAO,CAAC,OAAO,EAAE,EAAE,CAAC,CAAC,MAAM,EAAE,CAAC;QACnE,MAAM,IAAI,cAAc,CACtB,GAAG,UAAU,KAAK,KAAK,gCAAgC;YACrD,6DAA6D,CAChE,CAAC;IACJ,CAAC;IAED,OAAO,YAAY,CAAC,KAAK,EAAE,UAAU,EAAE,KAAK,CAAC,CAAC;AAChD,CAAC;AAED,SAAS,YAAY,CAAC,KAAa,EAAE,UAAkB,EAAE,KAAa;IACpE,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,KAAK,CAAC,IAAI,KAAK,GAAG,CAAC,EAAE,CAAC;QACzC,MAAM,IAAI,cAAc,CAAC,GAAG,UAAU,KAAK,KAAK,qCAAqC,CAAC,CAAC;IACzF,CAAC;IACD,OAAO,KAAK,CAAC;AACf,CAAC;AAmBD;;;;;;GAMG;AACH,MAAM,CAAC,MAAM,kBAAkB,GAAG,IAAI,CAAC;AAEvC;;;;;;;;;GASG;AACH,MAAM,UAAU,YAAY,CAAC,IAAY;IACvC,IAAI,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,kBAAkB,CAAC;IACrE,OAAO,IAAI,CAAC,GAAG,CAAC,kBAAkB,EAAE,CAAC,GAAG,IAAI,GAAG,CAAC,CAAC,CAAC;AACpD,CAAC;AAED,+EAA+E;AAC/E,MAAM,UAAU,mBAAmB,CACjC,IAAY,EACZ,YAAoB,EACpB,UAAkB,EAClB,YAAoB,kBAAkB;IAEtC,OAAO,IAAI,IAAI,YAAY,GAAG,SAAS,IAAI,IAAI,GAAG,UAAU,GAAG,SAAS,CAAC;AAC3E,CAAC;AAED,mFAAmF;AACnF,MAAM,UAAU,mBAAmB,CAAC,OAMnC;IACC,MAAM,KAAK,GAAG,YAAY,CAAC,OAAO,CAAC,IAAI,CAAC,CAAC;IACzC,MAAM,KAAK,GAAG,IAAI,CAAC,IAAI,CACrB,CAAC,OAAO,CAAC,YAAY,GAAG,KAAK,GAAG,OAAO,CAAC,WAAW,CAAC,GAAG,OAAO,CAAC,IAAI,CACpE,CAAC;IACF,MAAM,KAAK,GAAG,IAAI,CAAC,IAAI,CACrB,CAAC,OAAO,CAAC,UAAU,GAAG,KAAK,GAAG,OAAO,CAAC,WAAW,CAAC,GAAG,OAAO,CAAC,IAAI,CAClE,CAAC;IACF,MAAM,KAAK,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,OAAO,CAAC,gBAAgB,EAAE,KAAK,CAAC,CAAC,CAAC;IACrE,MAAM,IAAI,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,OAAO,CAAC,gBAAgB,EAAE,KAAK,CAAC,CAAC,CAAC;IACpE,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,GAAG,KAAK,CAAC,CAAC;AACnC,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,YAAY,CAAC,OAe5B;IACC,4EAA4E;IAC5E,gFAAgF;IAChF,6EAA6E;IAC7E,4EAA4E;IAC5E,2EAA2E;IAC3E,MAAM,EAAE,QAAQ,EAAE,MAAM,EAAE,GAAG,IAAI,CAAC,OAAO,CAAC,YAAY,EAAE,OAAO,CAAC,WAAW,EAAE,OAAO,CAAC,cAAc,CAAC,CAAC;IAErG,IAAI,OAAO,CAAC,QAAQ,KAAK,SAAS,IAAI,OAAO,CAAC,GAAG,KAAK,SAAS,EAAE,CAAC;QAChE,MAAM,IAAI,cAAc,CAAC,2CAA2C,CAAC,CAAC;IACxE,CAAC;IAED,MAAM,YAAY,GAAG,OAAO,CAAC,KAAK,IAAI,QAAQ,CAAC;IAE/C,IAAI,UAAkB,CAAC;IACvB,IAAI,OAAO,CAAC,QAAQ,KAAK,SAAS;QAAE,UAAU,GAAG,YAAY,GAAG,OAAO,CAAC,QAAQ,CAAC;SAC5E,IAAI,OAAO,CAAC,GAAG,KAAK,SAAS;QAAE,UAAU,GAAG,OAAO,CAAC,GAAG,CAAC;;QACxD,UAAU,GAAG,MAAM,CAAC;IAEzB,IAAI,YAAY,IAAI,MAAM,EAAE,CAAC;QAC3B;;;;;;;;;UASE;QACF,MAAM,IAAI,cAAc;QACtB;;;;;;;;;;;;UAYE;QACF,WAAW,MAAM,CAAC,OAAO,CAAC,SAAS,EAAE,YAAY,CAAC,iCAAiC;YACjF,GAAG,cAAc,CAAC,MAAM,CAAC,aAAa,CACzC,CAAC;IACJ,CAAC;IACD,IAAI,UAAU,IAAI,YAAY,EAAE,CAAC;QAC/B,uFAAuF;QACvF,sFAAsF;QACtF,qFAAqF;QACrF,MAAM,QAAQ,GACZ,OAAO,CAAC,GAAG,KAAK,SAAS,IAAI,OAAO,CAAC,OAAO,KAAK,SAAS;YACxD,CAAC,CAAC,MAAM,CAAC,OAAO,CAAC,OAAO,EAAE,UAAU,CAAC;YACrC,CAAC,CAAC,aAAa,CAAC,UAAU,CAAC,CAAC;QAChC,MAAM,UAAU,GAAG,MAAM,CAAC,OAAO,CAAC,SAAS,EAAE,YAAY,CAAC,CAAC;QAC3D,MAAM,IAAI,cAAc,CACtB,gCAAgC,QAAQ,qCAAqC,UAAU,GAAG,CAC3F,CAAC;IACJ,CAAC;IAED,MAAM,UAAU,GAAG,IAAI,CAAC,GAAG,CAAC,UAAU,EAAE,MAAM,CAAC,CAAC;IAChD,MAAM,EAAE,WAAW,EAAE,SAAS,EAAE,GAAG,aAAa,CAAC,OAAO,EAAE,YAAY,EAAE,UAAU,CAAC,CAAC;IAEpF,OAAO;QACL,YAAY;QACZ,UAAU,EAAE,UAAU;QACtB,WAAW;QACX,SAAS;QACT,gBAAgB,EAAE,YAAY,IAAI,QAAQ,IAAI,UAAU,IAAI,MAAM;QAClE,qBAAqB,EAAE,QAAQ;QAC/B,mBAAmB,EAAE,MAAM;KAC5B,CAAC;AACJ,CAAC;AAED,SAAS,IAAI,CACX,YAA6C,EAC7C,WAAmB,EACnB,cAAsB;IAEtB,IAAI,CAAC,YAAY,IAAI,YAAY,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QAC/C,OAAO,EAAE,QAAQ,EAAE,CAAC,EAAE,MAAM,EAAE,WAAW,GAAG,cAAc,EAAE,CAAC;IAC/D,CAAC;IACD,IAAI,QAAQ,GAAG,QAAQ,CAAC;IACxB,IAAI,MAAM,GAAG,CAAC,QAAQ,CAAC;IACvB,KAAK,MAAM,KAAK,IAAI,YAAY,EAAE,CAAC;QACjC,IAAI,KAAK,GAAG,QAAQ;YAAE,QAAQ,GAAG,KAAK,CAAC;QACvC,IAAI,KAAK,GAAG,cAAc,GAAG,MAAM;YAAE,MAAM,GAAG,KAAK,GAAG,cAAc,CAAC;IACvE,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,QAAQ,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,MAAM,CAAC,EAAE,CAAC;QAC3D,OAAO,EAAE,QAAQ,EAAE,CAAC,EAAE,MAAM,EAAE,WAAW,GAAG,cAAc,EAAE,CAAC;IAC/D,CAAC;IACD,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAE,CAAC;AAC9B,CAAC;AAED,sEAAsE;AACtE,SAAS,aAAa,CACpB,OAAwG,EACxG,YAAoB,EACpB,UAAkB;IAElB,MAAM,MAAM,GAAG,OAAO,CAAC,YAAY,CAAC;IACpC,IAAI,CAAC,MAAM,IAAI,MAAM,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QACnC,OAAO;YACL,WAAW,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,YAAY,GAAG,OAAO,CAAC,cAAc,CAAC,CAAC;YAC3E,SAAS,EAAE,IAAI,CAAC,GAAG,CAAC,OAAO,CAAC,WAAW,EAAE,IAAI,CAAC,IAAI,CAAC,UAAU,GAAG,OAAO,CAAC,cAAc,CAAC,CAAC;SACzF,CAAC;IACJ,CAAC;IAED,IAAI,KAAK,GAAG,OAAO,CAAC,WAAW,CAAC;IAChC,IAAI,IAAI,GAAG,CAAC,CAAC;IACb,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,MAAM,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QACvC,MAAM,KAAK,GAAG,MAAM,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;QAC7B,IAAI,KAAK,GAAG,OAAO,CAAC,cAAc,GAAG,YAAY,IAAI,KAAK,GAAG,UAAU,EAAE,CAAC;YACxE,IAAI,CAAC,GAAG,KAAK;gBAAE,KAAK,GAAG,CAAC,CAAC;YACzB,IAAI,CAAC,GAAG,CAAC,GAAG,IAAI;gBAAE,IAAI,GAAG,CAAC,GAAG,CAAC,CAAC;QACjC,CAAC;IACH,CAAC;IACD,OAAO,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,EAAE,WAAW,EAAE,KAAK,EAAE,SAAS,EAAE,IAAI,EAAE,CAAC,CAAC,CAAC,EAAE,WAAW,EAAE,CAAC,EAAE,SAAS,EAAE,CAAC,EAAE,CAAC;AACnG,CAAC;AAED;;;;GAIG;AACH,SAAS,MAAM,CAAC,IAAwB,EAAE,OAAe;IACvD,OAAO,IAAI,KAAK,SAAS,CAAC,CAAC,CAAC,aAAa,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,IAAI,IAAI,GAAG,CAAC;AACnE,CAAC;AAED,SAAS,aAAa,CAAC,OAAe;IACpC,OAAO,GAAG,MAAM,CAAC,OAAO,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC;AAC1C,CAAC","sourcesContent":["/**\n * Parsing for the time-range options.\n *\n * Researchers write offsets in whatever form is natural for the recording in front\n * of them: seconds for a short ECG strip, `30m` into a sleep study, `01:23:45` when\n * reading off a clock. All three are accepted; anything ambiguous is rejected with\n * a message that shows the forms that work.\n */\n\nimport { formatDuration } from '../format/number.js';\n\nexport class TimeRangeError extends Error {\n  constructor(message: string) {\n    super(message);\n    this.name = 'TimeRangeError';\n  }\n}\n\nconst UNIT_SECONDS: Record<string, number> = {\n  h: 3600,\n  hr: 3600,\n  hrs: 3600,\n  hour: 3600,\n  hours: 3600,\n  m: 60,\n  min: 60,\n  mins: 60,\n  minute: 60,\n  minutes: 60,\n  s: 1,\n  sec: 1,\n  secs: 1,\n  second: 1,\n  seconds: 1,\n  ms: 0.001,\n};\n\nconst CLOCK = /^(?:(\\d+):)?(\\d{1,2}):(\\d{1,2}(?:\\.\\d+)?)$/u;\nconst UNIT_TOKEN = /(\\d+(?:\\.\\d+)?)\\s*([a-z]+)/giu;\n\n/**\n * Parse a duration or offset into seconds.\n *\n * Accepted: `90`, `90s`, `5m`, `1h30m`, `1h 30m 15s`, `00:30:00`, `30:00`, `250ms`.\n */\nexport function parseTimeSpec(input: string, optionName: string): number {\n  const text = input.trim().toLowerCase();\n  if (text === '') {\n    throw new TimeRangeError(`${optionName} is empty. Try a value like 30s, 5m, or 00:30:00.`);\n  }\n\n  // Bare number means seconds.\n  if (/^\\d+(?:\\.\\d+)?$/u.test(text)) return assertFinite(Number(text), optionName, input);\n\n  // Clock form: hh:mm:ss or mm:ss.\n  const clock = CLOCK.exec(text);\n  if (clock) {\n    const hours = clock[1] === undefined ? 0 : Number(clock[1]);\n    const minutes = Number(clock[2]);\n    const seconds = Number(clock[3]);\n    if (minutes >= 60 || seconds >= 60) {\n      throw new TimeRangeError(\n        `${optionName} \"${input}\" has a minutes or seconds field of 60 or more.`,\n      );\n    }\n    return assertFinite(hours * 3600 + minutes * 60 + seconds, optionName, input);\n  }\n\n  // Unit form: 1h30m, 5 min, 250ms.\n  UNIT_TOKEN.lastIndex = 0;\n  let total = 0;\n  let matched = 0;\n  let consumed = 0;\n  let match: RegExpExecArray | null;\n  // Which units have already been seen, so a repeat can be rejected rather than added.\n  const seen = new Set<number>();\n  while ((match = UNIT_TOKEN.exec(text)) !== null) {\n    const amount = Number(match[1]);\n    const unit = match[2] ?? '';\n    const scale = UNIT_SECONDS[unit];\n    if (scale === undefined) {\n      throw new TimeRangeError(\n        `${optionName} \"${input}\" uses an unknown unit \"${unit}\". Use h, m, s, or ms.`,\n      );\n    }\n\n    // \"1h1h\" is a typo, not a request for two hours. Summing repeated units silently\n    // turned a slip into a plausible window that was quietly the wrong length. Units are\n    // keyed by their scale so the aliases collapse together: \"1h30min20m\" is caught too.\n    if (seen.has(scale)) {\n      throw new TimeRangeError(\n        `${optionName} \"${input}\" gives the same unit twice. ` +\n          `Combine each unit once, as in 1h30m.`,\n      );\n    }\n    seen.add(scale);\n\n    total += amount * scale;\n    matched++;\n    consumed += match[0].length;\n  }\n\n  // Reject partially-understood input like \"5x\" or \"1h banana\".\n  if (matched === 0 || consumed !== text.replace(/\\s+/gu, '').length) {\n    throw new TimeRangeError(\n      `${optionName} \"${input}\" is not a time I understand. ` +\n        `Try 30s, 5m, 1h30m, 00:30:00, or a plain number of seconds.`,\n    );\n  }\n\n  return assertFinite(total, optionName, input);\n}\n\nfunction assertFinite(value: number, optionName: string, input: string): number {\n  if (!Number.isFinite(value) || value < 0) {\n    throw new TimeRangeError(`${optionName} \"${input}\" is not a valid non-negative time.`);\n  }\n  return value;\n}\n\nexport interface ResolvedRange {\n  /** Inclusive start, in seconds from the beginning of the recording. */\n  startSeconds: number;\n  /** Exclusive end, in seconds. */\n  endSeconds: number;\n  /** First data record touching the window. */\n  startRecord: number;\n  /** One past the last data record touching the window. */\n  endRecord: number;\n  /** True when the window covers the whole recording. */\n  isWholeRecording: boolean;\n  /** Earliest record start, including EDF+D timing gaps. */\n  recordingStartSeconds: number;\n  /** End of the latest record, including EDF+D timing gaps. */\n  recordingEndSeconds: number;\n}\n\n/**\n * Slack for comparisons at sample/window boundaries.\n *\n * A nanosecond is far below any real sampling interval — 20 kHz is 50 microseconds — so it\n * absorbs the arithmetic error in `recordStart + sample / rate` without reaching a\n * neighbouring sample.\n */\nexport const BOUNDARY_TOLERANCE = 1e-9;\n\n/**\n * The slack to use for a channel sampled this often.\n *\n * Never as much as half a sample interval, because slack that reaches the next sample stops\n * being slack. A fixed nanosecond was applied whatever the rate, and the format does not\n * oblige the interval to be larger than it: EDF's record duration is an 8-character field\n * that accepts `1e-9`. A recording of two 1 ns records holding ten samples each wrote ten of\n * its twenty rows — the window ends at 2e-9, the comparison asked for `time < 2e-9 - 1e-9`,\n * and the entire second record failed it. Exit 0, no warning, half the samples gone.\n */\nexport function toleranceFor(rate: number): number {\n  if (!(rate > 0) || !Number.isFinite(rate)) return BOUNDARY_TOLERANCE;\n  return Math.min(BOUNDARY_TOLERANCE, 1 / rate / 2);\n}\n\n/** Match the exact half-open boundary rules used while writing signal rows. */\nexport function sampleTimeIsInRange(\n  time: number,\n  startSeconds: number,\n  endSeconds: number,\n  tolerance: number = BOUNDARY_TOLERANCE,\n): boolean {\n  return time >= startSeconds - tolerance && time < endSeconds - tolerance;\n}\n\n/** Count samples from one record that fall inside a half-open requested window. */\nexport function countSamplesInRange(options: {\n  recordStart: number;\n  rate: number;\n  samplesPerRecord: number;\n  startSeconds: number;\n  endSeconds: number;\n}): number {\n  const slack = toleranceFor(options.rate);\n  const lower = Math.ceil(\n    (options.startSeconds - slack - options.recordStart) * options.rate,\n  );\n  const upper = Math.ceil(\n    (options.endSeconds - slack - options.recordStart) * options.rate,\n  );\n  const first = Math.max(0, Math.min(options.samplesPerRecord, lower));\n  const last = Math.max(0, Math.min(options.samplesPerRecord, upper));\n  return Math.max(0, last - first);\n}\n\n/**\n * Turn a requested window into both an exact time span and the record range that\n * contains it. Records are the unit the file can be read in; the exact span is what\n * decides which samples inside those records are actually written.\n */\nexport function resolveRange(options: {\n  start?: number | undefined;\n  /** The `--start` value exactly as typed, quoted back in the past-the-end error. */\n  startText?: string | undefined;\n  duration?: number | undefined;\n  end?: number | undefined;\n  /** The `--end` value exactly as typed, quoted back in the window error. */\n  endText?: string | undefined;\n  recordDuration: number;\n  recordCount: number;\n  /**\n   * True start time of each data record, for discontinuous files. When absent,\n   * records are assumed to sit end to end.\n   */\n  recordStarts?: Float64Array | null | undefined;\n}): ResolvedRange {\n  // For a continuous file the recording spans recordCount * recordDuration. A\n  // discontinuous one does not: a 10-second recording with a 95-second gap in the\n  // middle still ends at 105 seconds. Deriving the span from the records' real\n  // positions is what stops a requested window from being clipped back to the\n  // amount of *data* in the file and silently discarding everything past it.\n  const { earliest, latest } = span(options.recordStarts, options.recordCount, options.recordDuration);\n\n  if (options.duration !== undefined && options.end !== undefined) {\n    throw new TimeRangeError('Use either --duration or --end, not both.');\n  }\n\n  const startSeconds = options.start ?? earliest;\n\n  let endSeconds: number;\n  if (options.duration !== undefined) endSeconds = startSeconds + options.duration;\n  else if (options.end !== undefined) endSeconds = options.end;\n  else endSeconds = latest;\n\n  if (startSeconds >= latest) {\n    /*\n      Quote what was typed. Reporting the parsed seconds meant `--start 4h` came back as\n      \"--start 14400s is at or past the end\", which reads as a value the user never gave.\n\n      In quotation marks, which the parse errors above have always used and this did not.\n      Without them the value ran into the sentence: `--start \"  5s  \"` printed as\n      `--start   5s   is at or past the end`, where the value appears to be `5s   is` and\n      the surrounding spaces — the actual reason a shell-built argument went wrong — are\n      invisible.\n    */\n    throw new TimeRangeError(\n      /*\n        The recording's length in the same words --info uses for it.\n\n        `formatSeconds` renders a bare number of seconds, so this message and the Duration\n        line disagreed about one file in one session: --info said \"6m 40s\" and the error said\n        \"400s\". On an overnight recording it read \"7950s recording\", leaving the reader to\n        divide by 3600 to find out whether their --start was reasonable — which is the one\n        question this message exists to answer. cli-reference.md has always documented it\n        humanised (\"2h 12m 30s\"), a form no input could produce.\n\n        The typed value keeps `quoted`, since that is the user's own text and should come\n        back exactly as they wrote it.\n      */\n      `--start ${quoted(options.startText, startSeconds)} is at or past the end of this ` +\n        `${formatDuration(latest)} recording.`,\n    );\n  }\n  if (endSeconds <= startSeconds) {\n    // Quote whatever the caller actually gave, for the same reason as the error above. The\n    // end is only echoed when --end was passed: with --duration the end is computed here,\n    // so there is no typed value to quote and the arithmetic result is the honest thing.\n    const endShown =\n      options.end !== undefined && options.endText !== undefined\n        ? quoted(options.endText, endSeconds)\n        : formatSeconds(endSeconds);\n    const startShown = quoted(options.startText, startSeconds);\n    throw new TimeRangeError(\n      `The requested window ends at ${endShown}, which is not after its start at ${startShown}.`,\n    );\n  }\n\n  const clampedEnd = Math.min(endSeconds, latest);\n  const { startRecord, endRecord } = selectRecords(options, startSeconds, clampedEnd);\n\n  return {\n    startSeconds,\n    endSeconds: clampedEnd,\n    startRecord,\n    endRecord,\n    isWholeRecording: startSeconds <= earliest && clampedEnd >= latest,\n    recordingStartSeconds: earliest,\n    recordingEndSeconds: latest,\n  };\n}\n\nfunction span(\n  recordStarts: Float64Array | null | undefined,\n  recordCount: number,\n  recordDuration: number,\n): { earliest: number; latest: number } {\n  if (!recordStarts || recordStarts.length === 0) {\n    return { earliest: 0, latest: recordCount * recordDuration };\n  }\n  let earliest = Infinity;\n  let latest = -Infinity;\n  for (const start of recordStarts) {\n    if (start < earliest) earliest = start;\n    if (start + recordDuration > latest) latest = start + recordDuration;\n  }\n  if (!Number.isFinite(earliest) || !Number.isFinite(latest)) {\n    return { earliest: 0, latest: recordCount * recordDuration };\n  }\n  return { earliest, latest };\n}\n\n/** Every record whose own time span overlaps the requested window. */\nfunction selectRecords(\n  options: { recordDuration: number; recordCount: number; recordStarts?: Float64Array | null | undefined },\n  startSeconds: number,\n  endSeconds: number,\n): { startRecord: number; endRecord: number } {\n  const starts = options.recordStarts;\n  if (!starts || starts.length === 0) {\n    return {\n      startRecord: Math.max(0, Math.floor(startSeconds / options.recordDuration)),\n      endRecord: Math.min(options.recordCount, Math.ceil(endSeconds / options.recordDuration)),\n    };\n  }\n\n  let first = options.recordCount;\n  let last = 0;\n  for (let i = 0; i < starts.length; i++) {\n    const begin = starts[i] ?? 0;\n    if (begin + options.recordDuration > startSeconds && begin < endSeconds) {\n      if (i < first) first = i;\n      if (i + 1 > last) last = i + 1;\n    }\n  }\n  return first < last ? { startRecord: first, endRecord: last } : { startRecord: 0, endRecord: 0 };\n}\n\n/**\n * The value as the caller typed it, in quotation marks, or the parsed seconds if they gave\n * none. The marks show where the value begins and ends, which matters most for the values\n * that went wrong because of what surrounds them.\n */\nfunction quoted(text: string | undefined, seconds: number): string {\n  return text === undefined ? formatSeconds(seconds) : `\"${text}\"`;\n}\n\nfunction formatSeconds(seconds: number): string {\n  return `${Number(seconds.toFixed(3))}s`;\n}\n"]}
+{"version":3,"file":"time-range.js","sourceRoot":"","sources":["../../src/convert/time-range.ts"],"names":[],"mappings":"AAAA;;;;;;;GAOG;AAEH,OAAO,EAAE,cAAc,EAAE,MAAM,qBAAqB,CAAC;AAErD,MAAM,OAAO,cAAe,SAAQ,KAAK;IACvC,YAAY,OAAe;QACzB,KAAK,CAAC,OAAO,CAAC,CAAC;QACf,IAAI,CAAC,IAAI,GAAG,gBAAgB,CAAC;IAC/B,CAAC;CACF;AAED,MAAM,YAAY,GAA2B;IAC3C,CAAC,EAAE,IAAI;IACP,EAAE,EAAE,IAAI;IACR,GAAG,EAAE,IAAI;IACT,IAAI,EAAE,IAAI;IACV,KAAK,EAAE,IAAI;IACX,CAAC,EAAE,EAAE;IACL,GAAG,EAAE,EAAE;IACP,IAAI,EAAE,EAAE;IACR,MAAM,EAAE,EAAE;IACV,OAAO,EAAE,EAAE;IACX,CAAC,EAAE,CAAC;IACJ,GAAG,EAAE,CAAC;IACN,IAAI,EAAE,CAAC;IACP,MAAM,EAAE,CAAC;IACT,OAAO,EAAE,CAAC;IACV,EAAE,EAAE,KAAK;CACV,CAAC;AAEF,MAAM,KAAK,GAAG,6CAA6C,CAAC;AAC5D,MAAM,UAAU,GAAG,+BAA+B,CAAC;AAEnD;;;;GAIG;AACH,MAAM,UAAU,aAAa,CAAC,KAAa,EAAE,UAAkB;IAC7D,MAAM,IAAI,GAAG,KAAK,CAAC,IAAI,EAAE,CAAC,WAAW,EAAE,CAAC;IACxC,IAAI,IAAI,KAAK,EAAE,EAAE,CAAC;QAChB,MAAM,IAAI,cAAc,CAAC,GAAG,UAAU,mDAAmD,CAAC,CAAC;IAC7F,CAAC;IAED,6BAA6B;IAC7B,IAAI,kBAAkB,CAAC,IAAI,CAAC,IAAI,CAAC;QAAE,OAAO,YAAY,CAAC,MAAM,CAAC,IAAI,CAAC,EAAE,UAAU,EAAE,KAAK,CAAC,CAAC;IAExF,iCAAiC;IACjC,MAAM,KAAK,GAAG,KAAK,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC;IAC/B,IAAI,KAAK,EAAE,CAAC;QACV,MAAM,KAAK,GAAG,KAAK,CAAC,CAAC,CAAC,KAAK,SAAS,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;QAC5D,MAAM,OAAO,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;QACjC,MAAM,OAAO,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;QACjC,IAAI,OAAO,IAAI,EAAE,IAAI,OAAO,IAAI,EAAE,EAAE,CAAC;YACnC,MAAM,IAAI,cAAc,CACtB,GAAG,UAAU,KAAK,KAAK,iDAAiD,CACzE,CAAC;QACJ,CAAC;QACD,OAAO,YAAY,CAAC,KAAK,GAAG,IAAI,GAAG,OAAO,GAAG,EAAE,GAAG,OAAO,EAAE,UAAU,EAAE,KAAK,CAAC,CAAC;IAChF,CAAC;IAED,kCAAkC;IAClC,UAAU,CAAC,SAAS,GAAG,CAAC,CAAC;IACzB,IAAI,KAAK,GAAG,CAAC,CAAC;IACd,IAAI,OAAO,GAAG,CAAC,CAAC;IAChB,IAAI,QAAQ,GAAG,CAAC,CAAC;IACjB,IAAI,KAA6B,CAAC;IAClC,qFAAqF;IACrF,MAAM,IAAI,GAAG,IAAI,GAAG,EAAU,CAAC;IAC/B,OAAO,CAAC,KAAK,GAAG,UAAU,CAAC,IAAI,CAAC,IAAI,CAAC,CAAC,KAAK,IAAI,EAAE,CAAC;QAChD,MAAM,MAAM,GAAG,MAAM,CAAC,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC;QAChC,MAAM,IAAI,GAAG,KAAK,CAAC,CAAC,CAAC,IAAI,EAAE,CAAC;QAC5B,MAAM,KAAK,GAAG,YAAY,CAAC,IAAI,CAAC,CAAC;QACjC,IAAI,KAAK,KAAK,SAAS,EAAE,CAAC;YACxB,MAAM,IAAI,cAAc,CACtB,GAAG,UAAU,KAAK,KAAK,2BAA2B,IAAI,wBAAwB,CAC/E,CAAC;QACJ,CAAC;QAED,iFAAiF;QACjF,qFAAqF;QACrF,qFAAqF;QACrF,IAAI,IAAI,CAAC,GAAG,CAAC,KAAK,CAAC,EAAE,CAAC;YACpB,MAAM,IAAI,cAAc,CACtB,GAAG,UAAU,KAAK,KAAK,+BAA+B;gBACpD,sCAAsC,CACzC,CAAC;QACJ,CAAC;QACD,IAAI,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC;QAEhB,KAAK,IAAI,MAAM,GAAG,KAAK,CAAC;QACxB,OAAO,EAAE,CAAC;QACV,QAAQ,IAAI,KAAK,CAAC,CAAC,CAAC,CAAC,MAAM,CAAC;IAC9B,CAAC;IAED,8DAA8D;IAC9D,IAAI,OAAO,KAAK,CAAC,IAAI,QAAQ,KAAK,IAAI,CAAC,OAAO,CAAC,OAAO,EAAE,EAAE,CAAC,CAAC,MAAM,EAAE,CAAC;QACnE,MAAM,IAAI,cAAc,CACtB,GAAG,UAAU,KAAK,KAAK,gCAAgC;YACrD,6DAA6D,CAChE,CAAC;IACJ,CAAC;IAED,OAAO,YAAY,CAAC,KAAK,EAAE,UAAU,EAAE,KAAK,CAAC,CAAC;AAChD,CAAC;AAED,SAAS,YAAY,CAAC,KAAa,EAAE,UAAkB,EAAE,KAAa;IACpE,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,KAAK,CAAC,IAAI,KAAK,GAAG,CAAC,EAAE,CAAC;QACzC,MAAM,IAAI,cAAc,CAAC,GAAG,UAAU,KAAK,KAAK,qCAAqC,CAAC,CAAC;IACzF,CAAC;IACD,OAAO,KAAK,CAAC;AACf,CAAC;AAmBD;;;;;;GAMG;AACH,MAAM,CAAC,MAAM,kBAAkB,GAAG,IAAI,CAAC;AAEvC;;;;;;;;;GASG;AACH,MAAM,UAAU,YAAY,CAAC,IAAY;IACvC,IAAI,CAAC,CAAC,IAAI,GAAG,CAAC,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,IAAI,CAAC;QAAE,OAAO,kBAAkB,CAAC;IACrE,OAAO,IAAI,CAAC,GAAG,CAAC,kBAAkB,EAAE,CAAC,GAAG,IAAI,GAAG,CAAC,CAAC,CAAC;AACpD,CAAC;AAED,+EAA+E;AAC/E,MAAM,UAAU,mBAAmB,CACjC,IAAY,EACZ,YAAoB,EACpB,UAAkB,EAClB,YAAoB,kBAAkB;IAEtC,OAAO,IAAI,IAAI,YAAY,GAAG,SAAS,IAAI,IAAI,GAAG,UAAU,GAAG,SAAS,CAAC;AAC3E,CAAC;AAED,mFAAmF;AACnF,MAAM,UAAU,mBAAmB,CAAC,OAMnC;IACC,MAAM,KAAK,GAAG,YAAY,CAAC,OAAO,CAAC,IAAI,CAAC,CAAC;IACzC,MAAM,KAAK,GAAG,IAAI,CAAC,IAAI,CACrB,CAAC,OAAO,CAAC,YAAY,GAAG,KAAK,GAAG,OAAO,CAAC,WAAW,CAAC,GAAG,OAAO,CAAC,IAAI,CACpE,CAAC;IACF,MAAM,KAAK,GAAG,IAAI,CAAC,IAAI,CACrB,CAAC,OAAO,CAAC,UAAU,GAAG,KAAK,GAAG,OAAO,CAAC,WAAW,CAAC,GAAG,OAAO,CAAC,IAAI,CAClE,CAAC;IACF,MAAM,KAAK,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,OAAO,CAAC,gBAAgB,EAAE,KAAK,CAAC,CAAC,CAAC;IACrE,MAAM,IAAI,GAAG,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,GAAG,CAAC,OAAO,CAAC,gBAAgB,EAAE,KAAK,CAAC,CAAC,CAAC;IACpE,OAAO,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,GAAG,KAAK,CAAC,CAAC;AACnC,CAAC;AAED;;;;GAIG;AACH,MAAM,UAAU,YAAY,CAAC,OAe5B;IACC,4EAA4E;IAC5E,gFAAgF;IAChF,6EAA6E;IAC7E,4EAA4E;IAC5E,2EAA2E;IAC3E,MAAM,EAAE,QAAQ,EAAE,MAAM,EAAE,GAAG,IAAI,CAAC,OAAO,CAAC,YAAY,EAAE,OAAO,CAAC,WAAW,EAAE,OAAO,CAAC,cAAc,CAAC,CAAC;IAErG,IAAI,OAAO,CAAC,QAAQ,KAAK,SAAS,IAAI,OAAO,CAAC,GAAG,KAAK,SAAS,EAAE,CAAC;QAChE,MAAM,IAAI,cAAc,CAAC,2CAA2C,CAAC,CAAC;IACxE,CAAC;IAED,MAAM,YAAY,GAAG,OAAO,CAAC,KAAK,IAAI,QAAQ,CAAC;IAE/C,IAAI,UAAkB,CAAC;IACvB,IAAI,OAAO,CAAC,QAAQ,KAAK,SAAS;QAAE,UAAU,GAAG,YAAY,GAAG,OAAO,CAAC,QAAQ,CAAC;SAC5E,IAAI,OAAO,CAAC,GAAG,KAAK,SAAS;QAAE,UAAU,GAAG,OAAO,CAAC,GAAG,CAAC;;QACxD,UAAU,GAAG,MAAM,CAAC;IAEzB,IAAI,YAAY,IAAI,MAAM,EAAE,CAAC;QAC3B;;;;;;;;;UASE;QACF,MAAM,IAAI,cAAc;QACtB;;;;;;;;;;;;UAYE;QACF;;;;;;;UAOE;QACF,QAAQ,KAAK,CAAC;YACZ,CAAC,CAAC,WAAW,MAAM,CAAC,OAAO,CAAC,SAAS,EAAE,YAAY,CAAC,iCAAiC;gBACnF,GAAG,cAAc,CAAC,MAAM,CAAC,aAAa;YACxC,CAAC,CAAC,WAAW,MAAM,CAAC,OAAO,CAAC,SAAS,EAAE,YAAY,CAAC,iCAAiC;gBACnF,GAAG,cAAc,CAAC,MAAM,GAAG,QAAQ,CAAC,8BAA8B;gBAClE,GAAG,aAAa,CAAC,QAAQ,CAAC,OAAO,aAAa,CAAC,MAAM,CAAC,GAAG,CAC9D,CAAC;IACJ,CAAC;IACD,IAAI,UAAU,IAAI,YAAY,EAAE,CAAC;QAC/B,uFAAuF;QACvF,sFAAsF;QACtF,qFAAqF;QACrF,MAAM,QAAQ,GACZ,OAAO,CAAC,GAAG,KAAK,SAAS,IAAI,OAAO,CAAC,OAAO,KAAK,SAAS;YACxD,CAAC,CAAC,MAAM,CAAC,OAAO,CAAC,OAAO,EAAE,UAAU,CAAC;YACrC,CAAC,CAAC,aAAa,CAAC,UAAU,CAAC,CAAC;QAChC,MAAM,UAAU,GAAG,MAAM,CAAC,OAAO,CAAC,SAAS,EAAE,YAAY,CAAC,CAAC;QAC3D,MAAM,IAAI,cAAc,CACtB,gCAAgC,QAAQ,qCAAqC,UAAU,GAAG,CAC3F,CAAC;IACJ,CAAC;IAED,MAAM,UAAU,GAAG,IAAI,CAAC,GAAG,CAAC,UAAU,EAAE,MAAM,CAAC,CAAC;IAChD,MAAM,EAAE,WAAW,EAAE,SAAS,EAAE,GAAG,aAAa,CAAC,OAAO,EAAE,YAAY,EAAE,UAAU,CAAC,CAAC;IAEpF,OAAO;QACL,YAAY;QACZ,UAAU,EAAE,UAAU;QACtB,WAAW;QACX,SAAS;QACT,gBAAgB,EAAE,YAAY,IAAI,QAAQ,IAAI,UAAU,IAAI,MAAM;QAClE,qBAAqB,EAAE,QAAQ;QAC/B,mBAAmB,EAAE,MAAM;KAC5B,CAAC;AACJ,CAAC;AAED,SAAS,IAAI,CACX,YAA6C,EAC7C,WAAmB,EACnB,cAAsB;IAEtB,IAAI,CAAC,YAAY,IAAI,YAAY,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QAC/C,OAAO,EAAE,QAAQ,EAAE,CAAC,EAAE,MAAM,EAAE,WAAW,GAAG,cAAc,EAAE,CAAC;IAC/D,CAAC;IACD,IAAI,QAAQ,GAAG,QAAQ,CAAC;IACxB,IAAI,MAAM,GAAG,CAAC,QAAQ,CAAC;IACvB,KAAK,MAAM,KAAK,IAAI,YAAY,EAAE,CAAC;QACjC,IAAI,KAAK,GAAG,QAAQ;YAAE,QAAQ,GAAG,KAAK,CAAC;QACvC,IAAI,KAAK,GAAG,cAAc,GAAG,MAAM;YAAE,MAAM,GAAG,KAAK,GAAG,cAAc,CAAC;IACvE,CAAC;IACD,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,QAAQ,CAAC,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,MAAM,CAAC,EAAE,CAAC;QAC3D,OAAO,EAAE,QAAQ,EAAE,CAAC,EAAE,MAAM,EAAE,WAAW,GAAG,cAAc,EAAE,CAAC;IAC/D,CAAC;IACD,OAAO,EAAE,QAAQ,EAAE,MAAM,EAAE,CAAC;AAC9B,CAAC;AAED,sEAAsE;AACtE,SAAS,aAAa,CACpB,OAAwG,EACxG,YAAoB,EACpB,UAAkB;IAElB,MAAM,MAAM,GAAG,OAAO,CAAC,YAAY,CAAC;IACpC,IAAI,CAAC,MAAM,IAAI,MAAM,CAAC,MAAM,KAAK,CAAC,EAAE,CAAC;QACnC,OAAO;YACL,WAAW,EAAE,IAAI,CAAC,GAAG,CAAC,CAAC,EAAE,IAAI,CAAC,KAAK,CAAC,YAAY,GAAG,OAAO,CAAC,cAAc,CAAC,CAAC;YAC3E,SAAS,EAAE,IAAI,CAAC,GAAG,CAAC,OAAO,CAAC,WAAW,EAAE,IAAI,CAAC,IAAI,CAAC,UAAU,GAAG,OAAO,CAAC,cAAc,CAAC,CAAC;SACzF,CAAC;IACJ,CAAC;IAED,IAAI,KAAK,GAAG,OAAO,CAAC,WAAW,CAAC;IAChC,IAAI,IAAI,GAAG,CAAC,CAAC;IACb,KAAK,IAAI,CAAC,GAAG,CAAC,EAAE,CAAC,GAAG,MAAM,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE,CAAC;QACvC,MAAM,KAAK,GAAG,MAAM,CAAC,CAAC,CAAC,IAAI,CAAC,CAAC;QAC7B,IAAI,KAAK,GAAG,OAAO,CAAC,cAAc,GAAG,YAAY,IAAI,KAAK,GAAG,UAAU,EAAE,CAAC;YACxE,IAAI,CAAC,GAAG,KAAK;gBAAE,KAAK,GAAG,CAAC,CAAC;YACzB,IAAI,CAAC,GAAG,CAAC,GAAG,IAAI;gBAAE,IAAI,GAAG,CAAC,GAAG,CAAC,CAAC;QACjC,CAAC;IACH,CAAC;IACD,OAAO,KAAK,GAAG,IAAI,CAAC,CAAC,CAAC,EAAE,WAAW,EAAE,KAAK,EAAE,SAAS,EAAE,IAAI,EAAE,CAAC,CAAC,CAAC,EAAE,WAAW,EAAE,CAAC,EAAE,SAAS,EAAE,CAAC,EAAE,CAAC;AACnG,CAAC;AAED;;;;GAIG;AACH,SAAS,MAAM,CAAC,IAAwB,EAAE,OAAe;IACvD,OAAO,IAAI,KAAK,SAAS,CAAC,CAAC,CAAC,aAAa,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,IAAI,IAAI,GAAG,CAAC;AACnE,CAAC;AAED,SAAS,aAAa,CAAC,OAAe;IACpC,OAAO,GAAG,MAAM,CAAC,OAAO,CAAC,OAAO,CAAC,CAAC,CAAC,CAAC,GAAG,CAAC;AAC1C,CAAC","sourcesContent":["/**\n * Parsing for the time-range options.\n *\n * Researchers write offsets in whatever form is natural for the recording in front\n * of them: seconds for a short ECG strip, `30m` into a sleep study, `01:23:45` when\n * reading off a clock. All three are accepted; anything ambiguous is rejected with\n * a message that shows the forms that work.\n */\n\nimport { formatDuration } from '../format/number.js';\n\nexport class TimeRangeError extends Error {\n  constructor(message: string) {\n    super(message);\n    this.name = 'TimeRangeError';\n  }\n}\n\nconst UNIT_SECONDS: Record<string, number> = {\n  h: 3600,\n  hr: 3600,\n  hrs: 3600,\n  hour: 3600,\n  hours: 3600,\n  m: 60,\n  min: 60,\n  mins: 60,\n  minute: 60,\n  minutes: 60,\n  s: 1,\n  sec: 1,\n  secs: 1,\n  second: 1,\n  seconds: 1,\n  ms: 0.001,\n};\n\nconst CLOCK = /^(?:(\\d+):)?(\\d{1,2}):(\\d{1,2}(?:\\.\\d+)?)$/u;\nconst UNIT_TOKEN = /(\\d+(?:\\.\\d+)?)\\s*([a-z]+)/giu;\n\n/**\n * Parse a duration or offset into seconds.\n *\n * Accepted: `90`, `90s`, `5m`, `1h30m`, `1h 30m 15s`, `00:30:00`, `30:00`, `250ms`.\n */\nexport function parseTimeSpec(input: string, optionName: string): number {\n  const text = input.trim().toLowerCase();\n  if (text === '') {\n    throw new TimeRangeError(`${optionName} is empty. Try a value like 30s, 5m, or 00:30:00.`);\n  }\n\n  // Bare number means seconds.\n  if (/^\\d+(?:\\.\\d+)?$/u.test(text)) return assertFinite(Number(text), optionName, input);\n\n  // Clock form: hh:mm:ss or mm:ss.\n  const clock = CLOCK.exec(text);\n  if (clock) {\n    const hours = clock[1] === undefined ? 0 : Number(clock[1]);\n    const minutes = Number(clock[2]);\n    const seconds = Number(clock[3]);\n    if (minutes >= 60 || seconds >= 60) {\n      throw new TimeRangeError(\n        `${optionName} \"${input}\" has a minutes or seconds field of 60 or more.`,\n      );\n    }\n    return assertFinite(hours * 3600 + minutes * 60 + seconds, optionName, input);\n  }\n\n  // Unit form: 1h30m, 5 min, 250ms.\n  UNIT_TOKEN.lastIndex = 0;\n  let total = 0;\n  let matched = 0;\n  let consumed = 0;\n  let match: RegExpExecArray | null;\n  // Which units have already been seen, so a repeat can be rejected rather than added.\n  const seen = new Set<number>();\n  while ((match = UNIT_TOKEN.exec(text)) !== null) {\n    const amount = Number(match[1]);\n    const unit = match[2] ?? '';\n    const scale = UNIT_SECONDS[unit];\n    if (scale === undefined) {\n      throw new TimeRangeError(\n        `${optionName} \"${input}\" uses an unknown unit \"${unit}\". Use h, m, s, or ms.`,\n      );\n    }\n\n    // \"1h1h\" is a typo, not a request for two hours. Summing repeated units silently\n    // turned a slip into a plausible window that was quietly the wrong length. Units are\n    // keyed by their scale so the aliases collapse together: \"1h30min20m\" is caught too.\n    if (seen.has(scale)) {\n      throw new TimeRangeError(\n        `${optionName} \"${input}\" gives the same unit twice. ` +\n          `Combine each unit once, as in 1h30m.`,\n      );\n    }\n    seen.add(scale);\n\n    total += amount * scale;\n    matched++;\n    consumed += match[0].length;\n  }\n\n  // Reject partially-understood input like \"5x\" or \"1h banana\".\n  if (matched === 0 || consumed !== text.replace(/\\s+/gu, '').length) {\n    throw new TimeRangeError(\n      `${optionName} \"${input}\" is not a time I understand. ` +\n        `Try 30s, 5m, 1h30m, 00:30:00, or a plain number of seconds.`,\n    );\n  }\n\n  return assertFinite(total, optionName, input);\n}\n\nfunction assertFinite(value: number, optionName: string, input: string): number {\n  if (!Number.isFinite(value) || value < 0) {\n    throw new TimeRangeError(`${optionName} \"${input}\" is not a valid non-negative time.`);\n  }\n  return value;\n}\n\nexport interface ResolvedRange {\n  /** Inclusive start, in seconds from the beginning of the recording. */\n  startSeconds: number;\n  /** Exclusive end, in seconds. */\n  endSeconds: number;\n  /** First data record touching the window. */\n  startRecord: number;\n  /** One past the last data record touching the window. */\n  endRecord: number;\n  /** True when the window covers the whole recording. */\n  isWholeRecording: boolean;\n  /** Earliest record start, including EDF+D timing gaps. */\n  recordingStartSeconds: number;\n  /** End of the latest record, including EDF+D timing gaps. */\n  recordingEndSeconds: number;\n}\n\n/**\n * Slack for comparisons at sample/window boundaries.\n *\n * A nanosecond is far below any real sampling interval — 20 kHz is 50 microseconds — so it\n * absorbs the arithmetic error in `recordStart + sample / rate` without reaching a\n * neighbouring sample.\n */\nexport const BOUNDARY_TOLERANCE = 1e-9;\n\n/**\n * The slack to use for a channel sampled this often.\n *\n * Never as much as half a sample interval, because slack that reaches the next sample stops\n * being slack. A fixed nanosecond was applied whatever the rate, and the format does not\n * oblige the interval to be larger than it: EDF's record duration is an 8-character field\n * that accepts `1e-9`. A recording of two 1 ns records holding ten samples each wrote ten of\n * its twenty rows — the window ends at 2e-9, the comparison asked for `time < 2e-9 - 1e-9`,\n * and the entire second record failed it. Exit 0, no warning, half the samples gone.\n */\nexport function toleranceFor(rate: number): number {\n  if (!(rate > 0) || !Number.isFinite(rate)) return BOUNDARY_TOLERANCE;\n  return Math.min(BOUNDARY_TOLERANCE, 1 / rate / 2);\n}\n\n/** Match the exact half-open boundary rules used while writing signal rows. */\nexport function sampleTimeIsInRange(\n  time: number,\n  startSeconds: number,\n  endSeconds: number,\n  tolerance: number = BOUNDARY_TOLERANCE,\n): boolean {\n  return time >= startSeconds - tolerance && time < endSeconds - tolerance;\n}\n\n/** Count samples from one record that fall inside a half-open requested window. */\nexport function countSamplesInRange(options: {\n  recordStart: number;\n  rate: number;\n  samplesPerRecord: number;\n  startSeconds: number;\n  endSeconds: number;\n}): number {\n  const slack = toleranceFor(options.rate);\n  const lower = Math.ceil(\n    (options.startSeconds - slack - options.recordStart) * options.rate,\n  );\n  const upper = Math.ceil(\n    (options.endSeconds - slack - options.recordStart) * options.rate,\n  );\n  const first = Math.max(0, Math.min(options.samplesPerRecord, lower));\n  const last = Math.max(0, Math.min(options.samplesPerRecord, upper));\n  return Math.max(0, last - first);\n}\n\n/**\n * Turn a requested window into both an exact time span and the record range that\n * contains it. Records are the unit the file can be read in; the exact span is what\n * decides which samples inside those records are actually written.\n */\nexport function resolveRange(options: {\n  start?: number | undefined;\n  /** The `--start` value exactly as typed, quoted back in the past-the-end error. */\n  startText?: string | undefined;\n  duration?: number | undefined;\n  end?: number | undefined;\n  /** The `--end` value exactly as typed, quoted back in the window error. */\n  endText?: string | undefined;\n  recordDuration: number;\n  recordCount: number;\n  /**\n   * True start time of each data record, for discontinuous files. When absent,\n   * records are assumed to sit end to end.\n   */\n  recordStarts?: Float64Array | null | undefined;\n}): ResolvedRange {\n  // For a continuous file the recording spans recordCount * recordDuration. A\n  // discontinuous one does not: a 10-second recording with a 95-second gap in the\n  // middle still ends at 105 seconds. Deriving the span from the records' real\n  // positions is what stops a requested window from being clipped back to the\n  // amount of *data* in the file and silently discarding everything past it.\n  const { earliest, latest } = span(options.recordStarts, options.recordCount, options.recordDuration);\n\n  if (options.duration !== undefined && options.end !== undefined) {\n    throw new TimeRangeError('Use either --duration or --end, not both.');\n  }\n\n  const startSeconds = options.start ?? earliest;\n\n  let endSeconds: number;\n  if (options.duration !== undefined) endSeconds = startSeconds + options.duration;\n  else if (options.end !== undefined) endSeconds = options.end;\n  else endSeconds = latest;\n\n  if (startSeconds >= latest) {\n    /*\n      Quote what was typed. Reporting the parsed seconds meant `--start 4h` came back as\n      \"--start 14400s is at or past the end\", which reads as a value the user never gave.\n\n      In quotation marks, which the parse errors above have always used and this did not.\n      Without them the value ran into the sentence: `--start \"  5s  \"` printed as\n      `--start   5s   is at or past the end`, where the value appears to be `5s   is` and\n      the surrounding spaces — the actual reason a shell-built argument went wrong — are\n      invisible.\n    */\n    throw new TimeRangeError(\n      /*\n        The recording's length in the same words --info uses for it.\n\n        `formatSeconds` renders a bare number of seconds, so this message and the Duration\n        line disagreed about one file in one session: --info said \"6m 40s\" and the error said\n        \"400s\". On an overnight recording it read \"7950s recording\", leaving the reader to\n        divide by 3600 to find out whether their --start was reasonable — which is the one\n        question this message exists to answer. cli-reference.md has always documented it\n        humanised (\"2h 12m 30s\"), a form no input could produce.\n\n        The typed value keeps `quoted`, since that is the user's own text and should come\n        back exactly as they wrote it.\n      */\n      /*\n        `latest` is where the recording ends on its own clock, which is its length only when\n        it starts at zero. A file timed from its first record's timekeeping TAL need not: one\n        whose records run 1000s to 1003s is three seconds long, and this called it \"this\n        16m 43s recording\" — while --info two lines away said \"Duration 3s\". Where the\n        recording sits is the useful thing to say in that case, and it is the number --start\n        has to be given.\n      */\n      earliest === 0\n        ? `--start ${quoted(options.startText, startSeconds)} is at or past the end of this ` +\n          `${formatDuration(latest)} recording.`\n        : `--start ${quoted(options.startText, startSeconds)} is at or past the end of this ` +\n          `${formatDuration(latest - earliest)} recording, which runs from ` +\n          `${formatSeconds(earliest)} to ${formatSeconds(latest)}.`,\n    );\n  }\n  if (endSeconds <= startSeconds) {\n    // Quote whatever the caller actually gave, for the same reason as the error above. The\n    // end is only echoed when --end was passed: with --duration the end is computed here,\n    // so there is no typed value to quote and the arithmetic result is the honest thing.\n    const endShown =\n      options.end !== undefined && options.endText !== undefined\n        ? quoted(options.endText, endSeconds)\n        : formatSeconds(endSeconds);\n    const startShown = quoted(options.startText, startSeconds);\n    throw new TimeRangeError(\n      `The requested window ends at ${endShown}, which is not after its start at ${startShown}.`,\n    );\n  }\n\n  const clampedEnd = Math.min(endSeconds, latest);\n  const { startRecord, endRecord } = selectRecords(options, startSeconds, clampedEnd);\n\n  return {\n    startSeconds,\n    endSeconds: clampedEnd,\n    startRecord,\n    endRecord,\n    isWholeRecording: startSeconds <= earliest && clampedEnd >= latest,\n    recordingStartSeconds: earliest,\n    recordingEndSeconds: latest,\n  };\n}\n\nfunction span(\n  recordStarts: Float64Array | null | undefined,\n  recordCount: number,\n  recordDuration: number,\n): { earliest: number; latest: number } {\n  if (!recordStarts || recordStarts.length === 0) {\n    return { earliest: 0, latest: recordCount * recordDuration };\n  }\n  let earliest = Infinity;\n  let latest = -Infinity;\n  for (const start of recordStarts) {\n    if (start < earliest) earliest = start;\n    if (start + recordDuration > latest) latest = start + recordDuration;\n  }\n  if (!Number.isFinite(earliest) || !Number.isFinite(latest)) {\n    return { earliest: 0, latest: recordCount * recordDuration };\n  }\n  return { earliest, latest };\n}\n\n/** Every record whose own time span overlaps the requested window. */\nfunction selectRecords(\n  options: { recordDuration: number; recordCount: number; recordStarts?: Float64Array | null | undefined },\n  startSeconds: number,\n  endSeconds: number,\n): { startRecord: number; endRecord: number } {\n  const starts = options.recordStarts;\n  if (!starts || starts.length === 0) {\n    return {\n      startRecord: Math.max(0, Math.floor(startSeconds / options.recordDuration)),\n      endRecord: Math.min(options.recordCount, Math.ceil(endSeconds / options.recordDuration)),\n    };\n  }\n\n  let first = options.recordCount;\n  let last = 0;\n  for (let i = 0; i < starts.length; i++) {\n    const begin = starts[i] ?? 0;\n    if (begin + options.recordDuration > startSeconds && begin < endSeconds) {\n      if (i < first) first = i;\n      if (i + 1 > last) last = i + 1;\n    }\n  }\n  return first < last ? { startRecord: first, endRecord: last } : { startRecord: 0, endRecord: 0 };\n}\n\n/**\n * The value as the caller typed it, in quotation marks, or the parsed seconds if they gave\n * none. The marks show where the value begins and ends, which matters most for the values\n * that went wrong because of what surrounds them.\n */\nfunction quoted(text: string | undefined, seconds: number): string {\n  return text === undefined ? formatSeconds(seconds) : `\"${text}\"`;\n}\n\nfunction formatSeconds(seconds: number): string {\n  return `${Number(seconds.toFixed(3))}s`;\n}\n"]}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "edf2csv",
-  "version": "0.5.58",
+  "version": "0.5.60",
   "description": "Convert EDF, EDF+ and BDF biosignal recordings (European Data Format) to CSV from the command line. Local, streaming, and never resamples or alters units.",
   "keywords": [
     "edf",