easyeda 0.0.230 → 0.0.231

package/dist/browser/{chunk-6S7LH5YP.js → chunk-U5UUPCU3.js}

@@ -835,6 +835,7 @@ __export(dist_exports, {
   pcb_courtyard_rect: () => pcb_courtyard_rect,
   pcb_cutout: () => pcb_cutout,
   pcb_cutout_circle: () => pcb_cutout_circle,
+  pcb_cutout_path: () => pcb_cutout_path,
   pcb_cutout_polygon: () => pcb_cutout_polygon,
   pcb_cutout_rect: () => pcb_cutout_rect,
   pcb_fabrication_note_dimension: () => pcb_fabrication_note_dimension,
@@ -847,8 +848,10 @@ __export(dist_exports, {
   pcb_group: () => pcb_group,
   pcb_hole: () => pcb_hole,
   pcb_hole_circle_or_square_shape: () => pcb_hole_circle_or_square_shape,
+  pcb_hole_circle_shape: () => pcb_hole_circle_shape,
   pcb_hole_oval_shape: () => pcb_hole_oval_shape,
   pcb_hole_pill_shape: () => pcb_hole_pill_shape,
+  pcb_hole_rect_shape: () => pcb_hole_rect_shape,
   pcb_hole_rotated_pill_shape: () => pcb_hole_rotated_pill_shape,
   pcb_keepout: () => pcb_keepout,
   pcb_manual_edit_conflict_warning: () => pcb_manual_edit_conflict_warning,
@@ -929,6 +932,7 @@ __export(dist_exports, {
   simulation_experiment: () => simulation_experiment,
   simulation_switch: () => simulation_switch,
   simulation_transient_voltage_graph: () => simulation_transient_voltage_graph,
+  simulation_unknown_experiment_error: () => simulation_unknown_experiment_error,
   simulation_voltage_probe: () => simulation_voltage_probe,
   simulation_voltage_source: () => simulation_voltage_source,
   size: () => size,
@@ -936,11 +940,13 @@ __export(dist_exports, {
   source_component_base: () => source_component_base,
   source_failed_to_create_component_error: () => source_failed_to_create_component_error,
   source_group: () => source_group,
+  source_interconnect: () => source_interconnect,
   source_manually_placed_via: () => source_manually_placed_via,
   source_missing_property_error: () => source_missing_property_error,
   source_net: () => source_net,
   source_pcb_ground_plane: () => source_pcb_ground_plane,
   source_pin_missing_trace_warning: () => source_pin_missing_trace_warning,
+  source_pin_must_be_connected_error: () => source_pin_must_be_connected_error,
   source_port: () => source_port,
   source_project_metadata: () => source_project_metadata,
   source_property_ignored_warning: () => source_property_ignored_warning,
@@ -963,6 +969,7 @@ __export(dist_exports, {
   source_simple_switch: () => source_simple_switch,
   source_simple_test_point: () => source_simple_test_point,
   source_simple_transistor: () => source_simple_transistor,
+  source_simple_voltage_probe: () => source_simple_voltage_probe,
   source_trace: () => source_trace,
   source_trace_not_connected_error: () => source_trace_not_connected_error,
   supplier_name: () => supplier_name,
@@ -988,7 +995,7 @@ import { z as z12 } from "zod";
 import { z as z13 } from "zod";
 import { z as z14 } from "zod";
 import { z as z15 } from "zod";
-import { z as z35 } from "zod";
+import { z as z37 } from "zod";
 import { z as z16 } from "zod";
 import { z as z17 } from "zod";
 import { z as z18 } from "zod";
@@ -1008,16 +1015,16 @@ import { z as z31 } from "zod";
 import { z as z32 } from "zod";
 import { z as z33 } from "zod";
 import { z as z34 } from "zod";
+import { z as z35 } from "zod";
 import { z as z36 } from "zod";
-import { z as z37 } from "zod";
 import { z as z38 } from "zod";
 import { z as z39 } from "zod";
 import { z as z40 } from "zod";
 import { z as z41 } from "zod";
-import { z as z43 } from "zod";
 import { z as z42 } from "zod";
-import { z as z44 } from "zod";
+import { z as z43 } from "zod";
 import { z as z45 } from "zod";
+import { z as z44 } from "zod";
 import { z as z46 } from "zod";
 import { z as z47 } from "zod";
 import { z as z48 } from "zod";
@@ -1025,11 +1032,11 @@ import { z as z49 } from "zod";
 import { z as z50 } from "zod";
 import { z as z51 } from "zod";
 import { z as z52 } from "zod";
-import { z as z54 } from "zod";
 import { z as z53 } from "zod";
+import { z as z54 } from "zod";
 import { z as z55 } from "zod";
-import { z as z56 } from "zod";
 import { z as z57 } from "zod";
+import { z as z56 } from "zod";
 import { z as z58 } from "zod";
 import { z as z59 } from "zod";
 import { z as z60 } from "zod";
@@ -1102,6 +1109,10 @@ import { z as z126 } from "zod";
 import { z as z127 } from "zod";
 import { z as z128 } from "zod";
 import { z as z129 } from "zod";
+import { z as z130 } from "zod";
+import { z as z131 } from "zod";
+import { z as z132 } from "zod";
+import { z as z133 } from "zod";
 var unitMappings = {
   Hz: {
     baseUnit: "Hz",
@@ -1616,7 +1627,17 @@ var source_pin_missing_trace_warning = z34.object({
   "Warning emitted when a source component pin is missing a trace connection"
 );
 expectTypesMatch(true);
-var any_source_component = z35.union([
+var source_simple_voltage_probe = source_component_base.extend({
+  ftype: z35.literal("simple_voltage_probe")
+});
+expectTypesMatch(
+  true
+);
+var source_interconnect = source_component_base.extend({
+  ftype: z36.literal("interconnect")
+});
+expectTypesMatch(true);
+var any_source_component = z37.union([
   source_simple_resistor,
   source_simple_capacitor,
   source_simple_diode,
@@ -1637,6 +1658,8 @@ var any_source_component = z35.union([
   source_simple_test_point,
   source_simple_mosfet,
   source_simple_fuse,
+  source_simple_voltage_probe,
+  source_interconnect,
   source_project_metadata,
   source_missing_property_error,
   source_failed_to_create_component_error,
@@ -1645,70 +1668,71 @@ var any_source_component = z35.union([
   source_pin_missing_trace_warning
 ]);
 expectTypesMatch(true);
-var source_port = z36.object({
-  type: z36.literal("source_port"),
-  pin_number: z36.number().optional(),
-  port_hints: z36.array(z36.string()).optional(),
-  name: z36.string(),
-  source_port_id: z36.string(),
-  source_component_id: z36.string().optional(),
-  source_group_id: z36.string().optional(),
-  subcircuit_id: z36.string().optional(),
-  subcircuit_connectivity_map_key: z36.string().optional()
+var source_port = z38.object({
+  type: z38.literal("source_port"),
+  pin_number: z38.number().optional(),
+  port_hints: z38.array(z38.string()).optional(),
+  name: z38.string(),
+  source_port_id: z38.string(),
+  source_component_id: z38.string().optional(),
+  source_group_id: z38.string().optional(),
+  subcircuit_id: z38.string().optional(),
+  subcircuit_connectivity_map_key: z38.string().optional(),
+  must_be_connected: z38.boolean().optional()
 });
 expectTypesMatch(true);
-var source_trace = z37.object({
-  type: z37.literal("source_trace"),
-  source_trace_id: z37.string(),
-  connected_source_port_ids: z37.array(z37.string()),
-  connected_source_net_ids: z37.array(z37.string()),
-  subcircuit_id: z37.string().optional(),
-  subcircuit_connectivity_map_key: z37.string().optional(),
-  max_length: z37.number().optional(),
-  min_trace_thickness: z37.number().optional(),
-  display_name: z37.string().optional()
+var source_trace = z39.object({
+  type: z39.literal("source_trace"),
+  source_trace_id: z39.string(),
+  connected_source_port_ids: z39.array(z39.string()),
+  connected_source_net_ids: z39.array(z39.string()),
+  subcircuit_id: z39.string().optional(),
+  subcircuit_connectivity_map_key: z39.string().optional(),
+  max_length: z39.number().optional(),
+  min_trace_thickness: z39.number().optional(),
+  display_name: z39.string().optional()
 });
 expectTypesMatch(true);
-var source_group = z38.object({
-  type: z38.literal("source_group"),
-  source_group_id: z38.string(),
-  subcircuit_id: z38.string().optional(),
-  parent_subcircuit_id: z38.string().optional(),
-  parent_source_group_id: z38.string().optional(),
-  is_subcircuit: z38.boolean().optional(),
-  show_as_schematic_box: z38.boolean().optional(),
-  name: z38.string().optional(),
-  was_automatically_named: z38.boolean().optional()
+var source_group = z40.object({
+  type: z40.literal("source_group"),
+  source_group_id: z40.string(),
+  subcircuit_id: z40.string().optional(),
+  parent_subcircuit_id: z40.string().optional(),
+  parent_source_group_id: z40.string().optional(),
+  is_subcircuit: z40.boolean().optional(),
+  show_as_schematic_box: z40.boolean().optional(),
+  name: z40.string().optional(),
+  was_automatically_named: z40.boolean().optional()
 });
 expectTypesMatch(true);
-var source_net = z39.object({
-  type: z39.literal("source_net"),
-  source_net_id: z39.string(),
-  name: z39.string(),
-  member_source_group_ids: z39.array(z39.string()),
-  is_power: z39.boolean().optional(),
-  is_ground: z39.boolean().optional(),
-  is_digital_signal: z39.boolean().optional(),
-  is_analog_signal: z39.boolean().optional(),
-  is_positive_voltage_source: z39.boolean().optional(),
-  trace_width: z39.number().optional(),
-  subcircuit_id: z39.string().optional(),
-  subcircuit_connectivity_map_key: z39.string().optional()
+var source_net = z41.object({
+  type: z41.literal("source_net"),
+  source_net_id: z41.string(),
+  name: z41.string(),
+  member_source_group_ids: z41.array(z41.string()),
+  is_power: z41.boolean().optional(),
+  is_ground: z41.boolean().optional(),
+  is_digital_signal: z41.boolean().optional(),
+  is_analog_signal: z41.boolean().optional(),
+  is_positive_voltage_source: z41.boolean().optional(),
+  trace_width: z41.number().optional(),
+  subcircuit_id: z41.string().optional(),
+  subcircuit_connectivity_map_key: z41.string().optional()
 });
 expectTypesMatch(true);
-var source_board = z40.object({
-  type: z40.literal("source_board"),
-  source_board_id: z40.string(),
-  source_group_id: z40.string(),
-  title: z40.string().optional()
+var source_board = z42.object({
+  type: z42.literal("source_board"),
+  source_board_id: z42.string(),
+  source_group_id: z42.string(),
+  title: z42.string().optional()
 }).describe("Defines a board in the source domain");
 expectTypesMatch(true);
-var source_pcb_ground_plane = z41.object({
-  type: z41.literal("source_pcb_ground_plane"),
-  source_pcb_ground_plane_id: z41.string(),
-  source_group_id: z41.string(),
-  source_net_id: z41.string(),
-  subcircuit_id: z41.string().optional()
+var source_pcb_ground_plane = z43.object({
+  type: z43.literal("source_pcb_ground_plane"),
+  source_pcb_ground_plane_id: z43.string(),
+  source_group_id: z43.string(),
+  source_net_id: z43.string(),
+  subcircuit_id: z43.string().optional()
 }).describe("Defines a ground plane in the source domain");
 expectTypesMatch(true);
 var all_layers = [
@@ -1721,9 +1745,9 @@ var all_layers = [
   "inner5",
   "inner6"
 ];
-var layer_string = z42.enum(all_layers);
+var layer_string = z44.enum(all_layers);
 var layer_ref = layer_string.or(
-  z42.object({
+  z44.object({
     name: layer_string
   })
 ).transform((layer) => {
@@ -1733,201 +1757,215 @@ var layer_ref = layer_string.or(
   return layer.name;
 });
 expectTypesMatch(true);
-var visible_layer = z42.enum(["top", "bottom"]);
-var source_manually_placed_via = z43.object({
-  type: z43.literal("source_manually_placed_via"),
-  source_manually_placed_via_id: z43.string(),
-  source_group_id: z43.string(),
-  source_net_id: z43.string(),
-  subcircuit_id: z43.string().optional(),
-  source_trace_id: z43.string().optional()
+var visible_layer = z44.enum(["top", "bottom"]);
+var source_manually_placed_via = z45.object({
+  type: z45.literal("source_manually_placed_via"),
+  source_manually_placed_via_id: z45.string(),
+  source_group_id: z45.string(),
+  source_net_id: z45.string(),
+  subcircuit_id: z45.string().optional(),
+  source_trace_id: z45.string().optional()
 }).describe("Defines a via that is manually placed in the source domain");
 expectTypesMatch(true);
-var unknown_error_finding_part = z44.object({
-  type: z44.literal("unknown_error_finding_part"),
+var source_pin_must_be_connected_error = z46.object({
+  type: z46.literal("source_pin_must_be_connected_error"),
+  source_pin_must_be_connected_error_id: getZodPrefixedIdWithDefault(
+    "source_pin_must_be_connected_error"
+  ),
+  error_type: z46.literal("source_pin_must_be_connected_error").default("source_pin_must_be_connected_error"),
+  message: z46.string(),
+  source_component_id: z46.string(),
+  source_port_id: z46.string(),
+  subcircuit_id: z46.string().optional()
+}).describe(
+  "Error emitted when a pin with mustBeConnected attribute is not connected to any trace"
+);
+expectTypesMatch(true);
+var unknown_error_finding_part = z47.object({
+  type: z47.literal("unknown_error_finding_part"),
   unknown_error_finding_part_id: getZodPrefixedIdWithDefault(
     "unknown_error_finding_part"
   ),
-  error_type: z44.literal("unknown_error_finding_part").default("unknown_error_finding_part"),
-  message: z44.string(),
-  source_component_id: z44.string().optional(),
-  subcircuit_id: z44.string().optional()
+  error_type: z47.literal("unknown_error_finding_part").default("unknown_error_finding_part"),
+  message: z47.string(),
+  source_component_id: z47.string().optional(),
+  subcircuit_id: z47.string().optional()
 }).describe(
   "Error emitted when an unexpected error occurs while finding a part"
 );
 expectTypesMatch(true);
-var schematic_box = z45.object({
-  type: z45.literal("schematic_box"),
-  schematic_component_id: z45.string().optional(),
+var schematic_box = z48.object({
+  type: z48.literal("schematic_box"),
+  schematic_component_id: z48.string().optional(),
   width: distance,
   height: distance,
-  is_dashed: z45.boolean().default(false),
+  is_dashed: z48.boolean().default(false),
   x: distance,
   y: distance,
-  subcircuit_id: z45.string().optional()
+  subcircuit_id: z48.string().optional()
 }).describe("Draws a box on the schematic");
 expectTypesMatch(true);
-var schematic_path = z46.object({
-  type: z46.literal("schematic_path"),
-  schematic_component_id: z46.string(),
-  fill_color: z46.enum(["red", "blue"]).optional(),
-  is_filled: z46.boolean().optional(),
-  points: z46.array(point),
-  subcircuit_id: z46.string().optional()
+var schematic_path = z49.object({
+  type: z49.literal("schematic_path"),
+  schematic_component_id: z49.string(),
+  fill_color: z49.enum(["red", "blue"]).optional(),
+  is_filled: z49.boolean().optional(),
+  points: z49.array(point),
+  subcircuit_id: z49.string().optional()
 });
 expectTypesMatch(true);
-var schematic_pin_styles = z47.record(
-  z47.object({
+var schematic_pin_styles = z50.record(
+  z50.object({
     left_margin: length.optional(),
     right_margin: length.optional(),
     top_margin: length.optional(),
     bottom_margin: length.optional()
   })
 );
-var schematic_component_port_arrangement_by_size = z47.object({
-  left_size: z47.number(),
-  right_size: z47.number(),
-  top_size: z47.number().optional(),
-  bottom_size: z47.number().optional()
+var schematic_component_port_arrangement_by_size = z50.object({
+  left_size: z50.number(),
+  right_size: z50.number(),
+  top_size: z50.number().optional(),
+  bottom_size: z50.number().optional()
 });
 expectTypesMatch(true);
-var schematic_component_port_arrangement_by_sides = z47.object({
-  left_side: z47.object({
-    pins: z47.array(z47.number()),
+var schematic_component_port_arrangement_by_sides = z50.object({
+  left_side: z50.object({
+    pins: z50.array(z50.number()),
     // @ts-ignore
-    direction: z47.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z50.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  right_side: z47.object({
-    pins: z47.array(z47.number()),
+  right_side: z50.object({
+    pins: z50.array(z50.number()),
     // @ts-ignore
-    direction: z47.enum(["top-to-bottom", "bottom-to-top"]).optional()
+    direction: z50.enum(["top-to-bottom", "bottom-to-top"]).optional()
   }).optional(),
-  top_side: z47.object({
-    pins: z47.array(z47.number()),
+  top_side: z50.object({
+    pins: z50.array(z50.number()),
     // @ts-ignore
-    direction: z47.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z50.enum(["left-to-right", "right-to-left"]).optional()
   }).optional(),
-  bottom_side: z47.object({
-    pins: z47.array(z47.number()),
+  bottom_side: z50.object({
+    pins: z50.array(z50.number()),
     // @ts-ignore
-    direction: z47.enum(["left-to-right", "right-to-left"]).optional()
+    direction: z50.enum(["left-to-right", "right-to-left"]).optional()
   }).optional()
 });
 expectTypesMatch(true);
-var port_arrangement = z47.union([
+var port_arrangement = z50.union([
   schematic_component_port_arrangement_by_size,
   schematic_component_port_arrangement_by_sides
 ]);
-var schematic_component = z47.object({
-  type: z47.literal("schematic_component"),
+var schematic_component = z50.object({
+  type: z50.literal("schematic_component"),
   size,
   center: point,
-  source_component_id: z47.string().optional(),
-  schematic_component_id: z47.string(),
+  source_component_id: z50.string().optional(),
+  schematic_component_id: z50.string(),
   pin_spacing: length.optional(),
   pin_styles: schematic_pin_styles.optional(),
   box_width: length.optional(),
-  symbol_name: z47.string().optional(),
+  symbol_name: z50.string().optional(),
   port_arrangement: port_arrangement.optional(),
-  port_labels: z47.record(z47.string()).optional(),
-  symbol_display_value: z47.string().optional(),
-  subcircuit_id: z47.string().optional(),
-  schematic_group_id: z47.string().optional(),
-  is_schematic_group: z47.boolean().optional(),
-  source_group_id: z47.string().optional(),
-  is_box_with_pins: z47.boolean().optional().default(true)
+  port_labels: z50.record(z50.string()).optional(),
+  symbol_display_value: z50.string().optional(),
+  subcircuit_id: z50.string().optional(),
+  schematic_group_id: z50.string().optional(),
+  is_schematic_group: z50.boolean().optional(),
+  source_group_id: z50.string().optional(),
+  is_box_with_pins: z50.boolean().optional().default(true)
 });
 expectTypesMatch(true);
-var schematic_line = z48.object({
-  type: z48.literal("schematic_line"),
+var schematic_line = z51.object({
+  type: z51.literal("schematic_line"),
   schematic_line_id: getZodPrefixedIdWithDefault("schematic_line"),
-  schematic_component_id: z48.string(),
+  schematic_component_id: z51.string(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.nullable().optional(),
-  color: z48.string().default("#000000"),
-  is_dashed: z48.boolean().default(false),
-  subcircuit_id: z48.string().optional()
+  color: z51.string().default("#000000"),
+  is_dashed: z51.boolean().default(false),
+  subcircuit_id: z51.string().optional()
 }).describe("Draws a styled line on the schematic");
 expectTypesMatch(true);
-var schematic_rect = z49.object({
-  type: z49.literal("schematic_rect"),
+var schematic_rect = z52.object({
+  type: z52.literal("schematic_rect"),
   schematic_rect_id: getZodPrefixedIdWithDefault("schematic_rect"),
-  schematic_component_id: z49.string(),
+  schematic_component_id: z52.string(),
   center: point,
   width: distance,
   height: distance,
   rotation: rotation.default(0),
   stroke_width: distance.nullable().optional(),
-  color: z49.string().default("#000000"),
-  is_filled: z49.boolean().default(false),
-  fill_color: z49.string().optional(),
-  is_dashed: z49.boolean().default(false),
-  subcircuit_id: z49.string().optional()
+  color: z52.string().default("#000000"),
+  is_filled: z52.boolean().default(false),
+  fill_color: z52.string().optional(),
+  is_dashed: z52.boolean().default(false),
+  subcircuit_id: z52.string().optional()
 }).describe("Draws a styled rectangle on the schematic");
 expectTypesMatch(true);
-var schematic_circle = z50.object({
-  type: z50.literal("schematic_circle"),
+var schematic_circle = z53.object({
+  type: z53.literal("schematic_circle"),
   schematic_circle_id: getZodPrefixedIdWithDefault("schematic_circle"),
-  schematic_component_id: z50.string(),
+  schematic_component_id: z53.string(),
   center: point,
   radius: distance,
   stroke_width: distance.nullable().optional(),
-  color: z50.string().default("#000000"),
-  is_filled: z50.boolean().default(false),
-  fill_color: z50.string().optional(),
-  is_dashed: z50.boolean().default(false),
-  subcircuit_id: z50.string().optional()
+  color: z53.string().default("#000000"),
+  is_filled: z53.boolean().default(false),
+  fill_color: z53.string().optional(),
+  is_dashed: z53.boolean().default(false),
+  subcircuit_id: z53.string().optional()
 }).describe("Draws a styled circle on the schematic");
 expectTypesMatch(true);
-var schematic_arc = z51.object({
-  type: z51.literal("schematic_arc"),
+var schematic_arc = z54.object({
+  type: z54.literal("schematic_arc"),
   schematic_arc_id: getZodPrefixedIdWithDefault("schematic_arc"),
-  schematic_component_id: z51.string(),
+  schematic_component_id: z54.string(),
   center: point,
   radius: distance,
   start_angle_degrees: rotation,
   end_angle_degrees: rotation,
-  direction: z51.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
+  direction: z54.enum(["clockwise", "counterclockwise"]).default("counterclockwise"),
   stroke_width: distance.nullable().optional(),
-  color: z51.string().default("#000000"),
-  is_dashed: z51.boolean().default(false),
-  subcircuit_id: z51.string().optional()
+  color: z54.string().default("#000000"),
+  is_dashed: z54.boolean().default(false),
+  subcircuit_id: z54.string().optional()
 }).describe("Draws a styled arc on the schematic");
 expectTypesMatch(true);
-var schematic_trace = z52.object({
-  type: z52.literal("schematic_trace"),
-  schematic_trace_id: z52.string(),
-  source_trace_id: z52.string().optional(),
-  junctions: z52.array(
-    z52.object({
-      x: z52.number(),
-      y: z52.number()
+var schematic_trace = z55.object({
+  type: z55.literal("schematic_trace"),
+  schematic_trace_id: z55.string(),
+  source_trace_id: z55.string().optional(),
+  junctions: z55.array(
+    z55.object({
+      x: z55.number(),
+      y: z55.number()
     })
   ),
-  edges: z52.array(
-    z52.object({
-      from: z52.object({
-        x: z52.number(),
-        y: z52.number()
+  edges: z55.array(
+    z55.object({
+      from: z55.object({
+        x: z55.number(),
+        y: z55.number()
       }),
-      to: z52.object({
-        x: z52.number(),
-        y: z52.number()
+      to: z55.object({
+        x: z55.number(),
+        y: z55.number()
       }),
-      is_crossing: z52.boolean().optional(),
-      from_schematic_port_id: z52.string().optional(),
-      to_schematic_port_id: z52.string().optional()
+      is_crossing: z55.boolean().optional(),
+      from_schematic_port_id: z55.string().optional(),
+      to_schematic_port_id: z55.string().optional()
     })
   ),
-  subcircuit_id: z52.string().optional(),
+  subcircuit_id: z55.string().optional(),
   // TODO: make required in a future release
-  subcircuit_connectivity_map_key: z52.string().optional()
+  subcircuit_connectivity_map_key: z55.string().optional()
 });
 expectTypesMatch(true);
-var fivePointAnchor = z53.enum([
+var fivePointAnchor = z56.enum([
   "center",
   "left",
   "right",
@@ -1935,398 +1973,481 @@ var fivePointAnchor = z53.enum([
   "bottom"
 ]);
 expectTypesMatch(true);
-var schematic_text = z54.object({
-  type: z54.literal("schematic_text"),
-  schematic_component_id: z54.string().optional(),
-  schematic_text_id: z54.string(),
-  text: z54.string(),
-  font_size: z54.number().default(0.18),
-  position: z54.object({
+var schematic_text = z57.object({
+  type: z57.literal("schematic_text"),
+  schematic_component_id: z57.string().optional(),
+  schematic_text_id: z57.string(),
+  text: z57.string(),
+  font_size: z57.number().default(0.18),
+  position: z57.object({
     x: distance,
     y: distance
   }),
-  rotation: z54.number().default(0),
-  anchor: z54.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
-  color: z54.string().default("#000000"),
-  subcircuit_id: z54.string().optional()
+  rotation: z57.number().default(0),
+  anchor: z57.union([fivePointAnchor.describe("legacy"), ninePointAnchor]).default("center"),
+  color: z57.string().default("#000000"),
+  subcircuit_id: z57.string().optional()
 });
 expectTypesMatch(true);
-var schematic_port = z55.object({
-  type: z55.literal("schematic_port"),
-  schematic_port_id: z55.string(),
-  source_port_id: z55.string(),
-  schematic_component_id: z55.string().optional(),
+var schematic_port = z58.object({
+  type: z58.literal("schematic_port"),
+  schematic_port_id: z58.string(),
+  source_port_id: z58.string(),
+  schematic_component_id: z58.string().optional(),
   center: point,
-  facing_direction: z55.enum(["up", "down", "left", "right"]).optional(),
-  distance_from_component_edge: z55.number().optional(),
-  side_of_component: z55.enum(["top", "bottom", "left", "right"]).optional(),
-  true_ccw_index: z55.number().optional(),
-  pin_number: z55.number().optional(),
-  display_pin_label: z55.string().optional(),
-  subcircuit_id: z55.string().optional(),
-  is_connected: z55.boolean().optional(),
-  has_input_arrow: z55.boolean().optional(),
-  has_output_arrow: z55.boolean().optional()
+  facing_direction: z58.enum(["up", "down", "left", "right"]).optional(),
+  distance_from_component_edge: z58.number().optional(),
+  side_of_component: z58.enum(["top", "bottom", "left", "right"]).optional(),
+  true_ccw_index: z58.number().optional(),
+  pin_number: z58.number().optional(),
+  display_pin_label: z58.string().optional(),
+  subcircuit_id: z58.string().optional(),
+  is_connected: z58.boolean().optional(),
+  has_input_arrow: z58.boolean().optional(),
+  has_output_arrow: z58.boolean().optional()
 }).describe("Defines a port on a schematic component");
 expectTypesMatch(true);
-var schematic_net_label = z56.object({
-  type: z56.literal("schematic_net_label"),
+var schematic_net_label = z59.object({
+  type: z59.literal("schematic_net_label"),
   schematic_net_label_id: getZodPrefixedIdWithDefault("schematic_net_label"),
-  schematic_trace_id: z56.string().optional(),
-  source_trace_id: z56.string().optional(),
-  source_net_id: z56.string(),
+  schematic_trace_id: z59.string().optional(),
+  source_trace_id: z59.string().optional(),
+  source_net_id: z59.string(),
   center: point,
   anchor_position: point.optional(),
-  anchor_side: z56.enum(["top", "bottom", "left", "right"]),
-  text: z56.string(),
-  symbol_name: z56.string().optional(),
-  is_movable: z56.boolean().optional(),
-  subcircuit_id: z56.string().optional()
+  anchor_side: z59.enum(["top", "bottom", "left", "right"]),
+  text: z59.string(),
+  symbol_name: z59.string().optional(),
+  is_movable: z59.boolean().optional(),
+  subcircuit_id: z59.string().optional()
 });
 expectTypesMatch(true);
-var schematic_error = z57.object({
-  type: z57.literal("schematic_error"),
-  schematic_error_id: z57.string(),
+var schematic_error = z60.object({
+  type: z60.literal("schematic_error"),
+  schematic_error_id: z60.string(),
   // eventually each error type should be broken out into a dir of files
-  error_type: z57.literal("schematic_port_not_found").default("schematic_port_not_found"),
-  message: z57.string(),
-  subcircuit_id: z57.string().optional()
+  error_type: z60.literal("schematic_port_not_found").default("schematic_port_not_found"),
+  message: z60.string(),
+  subcircuit_id: z60.string().optional()
 }).describe("Defines a schematic error on the schematic");
 expectTypesMatch(true);
-var schematic_layout_error = z58.object({
-  type: z58.literal("schematic_layout_error"),
+var schematic_layout_error = z61.object({
+  type: z61.literal("schematic_layout_error"),
   schematic_layout_error_id: getZodPrefixedIdWithDefault(
     "schematic_layout_error"
   ),
-  error_type: z58.literal("schematic_layout_error").default("schematic_layout_error"),
-  message: z58.string(),
-  source_group_id: z58.string(),
-  schematic_group_id: z58.string(),
-  subcircuit_id: z58.string().optional()
+  error_type: z61.literal("schematic_layout_error").default("schematic_layout_error"),
+  message: z61.string(),
+  source_group_id: z61.string(),
+  schematic_group_id: z61.string(),
+  subcircuit_id: z61.string().optional()
 }).describe("Error emitted when schematic layout fails for a group");
 expectTypesMatch(true);
-var schematic_debug_object_base = z59.object({
-  type: z59.literal("schematic_debug_object"),
-  label: z59.string().optional(),
-  subcircuit_id: z59.string().optional()
+var schematic_debug_object_base = z62.object({
+  type: z62.literal("schematic_debug_object"),
+  label: z62.string().optional(),
+  subcircuit_id: z62.string().optional()
 });
 var schematic_debug_rect = schematic_debug_object_base.extend({
-  shape: z59.literal("rect"),
+  shape: z62.literal("rect"),
   center: point,
   size
 });
 var schematic_debug_line = schematic_debug_object_base.extend({
-  shape: z59.literal("line"),
+  shape: z62.literal("line"),
   start: point,
   end: point
 });
 var schematic_debug_point = schematic_debug_object_base.extend({
-  shape: z59.literal("point"),
+  shape: z62.literal("point"),
   center: point
 });
-var schematic_debug_object = z59.discriminatedUnion("shape", [
+var schematic_debug_object = z62.discriminatedUnion("shape", [
   schematic_debug_rect,
   schematic_debug_line,
   schematic_debug_point
 ]);
 expectTypesMatch(true);
-var schematic_voltage_probe = z60.object({
-  type: z60.literal("schematic_voltage_probe"),
-  schematic_voltage_probe_id: z60.string(),
+var schematic_voltage_probe = z63.object({
+  type: z63.literal("schematic_voltage_probe"),
+  schematic_voltage_probe_id: z63.string(),
+  source_component_id: z63.string().optional(),
+  name: z63.string().optional(),
   position: point,
-  schematic_trace_id: z60.string(),
+  schematic_trace_id: z63.string(),
   voltage: voltage.optional(),
-  subcircuit_id: z60.string().optional()
+  subcircuit_id: z63.string().optional(),
+  color: z63.string().optional()
 }).describe("Defines a voltage probe measurement point on a schematic trace");
 expectTypesMatch(true);
-var schematic_manual_edit_conflict_warning = z61.object({
-  type: z61.literal("schematic_manual_edit_conflict_warning"),
+var schematic_manual_edit_conflict_warning = z64.object({
+  type: z64.literal("schematic_manual_edit_conflict_warning"),
   schematic_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "schematic_manual_edit_conflict_warning"
   ),
-  warning_type: z61.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
-  message: z61.string(),
-  schematic_component_id: z61.string(),
-  schematic_group_id: z61.string().optional(),
-  subcircuit_id: z61.string().optional(),
-  source_component_id: z61.string()
+  warning_type: z64.literal("schematic_manual_edit_conflict_warning").default("schematic_manual_edit_conflict_warning"),
+  message: z64.string(),
+  schematic_component_id: z64.string(),
+  schematic_group_id: z64.string().optional(),
+  subcircuit_id: z64.string().optional(),
+  source_component_id: z64.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit schX/schY coordinates"
 );
 expectTypesMatch(true);
-var schematic_group = z62.object({
-  type: z62.literal("schematic_group"),
+var schematic_group = z65.object({
+  type: z65.literal("schematic_group"),
   schematic_group_id: getZodPrefixedIdWithDefault("schematic_group"),
-  source_group_id: z62.string(),
-  is_subcircuit: z62.boolean().optional(),
-  subcircuit_id: z62.string().optional(),
+  source_group_id: z65.string(),
+  is_subcircuit: z65.boolean().optional(),
+  subcircuit_id: z65.string().optional(),
   width: length,
   height: length,
   center: point,
-  schematic_component_ids: z62.array(z62.string()),
-  show_as_schematic_box: z62.boolean().optional(),
-  name: z62.string().optional(),
-  description: z62.string().optional()
+  schematic_component_ids: z65.array(z65.string()),
+  show_as_schematic_box: z65.boolean().optional(),
+  name: z65.string().optional(),
+  description: z65.string().optional()
 }).describe("Defines a group of components on the schematic");
 expectTypesMatch(true);
-var schematic_table = z63.object({
-  type: z63.literal("schematic_table"),
+var schematic_table = z66.object({
+  type: z66.literal("schematic_table"),
   schematic_table_id: getZodPrefixedIdWithDefault("schematic_table"),
   anchor_position: point,
-  column_widths: z63.array(distance),
-  row_heights: z63.array(distance),
+  column_widths: z66.array(distance),
+  row_heights: z66.array(distance),
   cell_padding: distance.optional(),
   border_width: distance.optional(),
-  subcircuit_id: z63.string().optional(),
-  schematic_component_id: z63.string().optional(),
+  subcircuit_id: z66.string().optional(),
+  schematic_component_id: z66.string().optional(),
   anchor: ninePointAnchor.optional()
 }).describe("Defines a table on the schematic");
 expectTypesMatch(true);
-var schematic_table_cell = z64.object({
-  type: z64.literal("schematic_table_cell"),
+var schematic_table_cell = z67.object({
+  type: z67.literal("schematic_table_cell"),
   schematic_table_cell_id: getZodPrefixedIdWithDefault(
     "schematic_table_cell"
   ),
-  schematic_table_id: z64.string(),
-  start_row_index: z64.number(),
-  end_row_index: z64.number(),
-  start_column_index: z64.number(),
-  end_column_index: z64.number(),
-  text: z64.string().optional(),
+  schematic_table_id: z67.string(),
+  start_row_index: z67.number(),
+  end_row_index: z67.number(),
+  start_column_index: z67.number(),
+  end_column_index: z67.number(),
+  text: z67.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  horizontal_align: z64.enum(["left", "center", "right"]).optional(),
-  vertical_align: z64.enum(["top", "middle", "bottom"]).optional(),
+  horizontal_align: z67.enum(["left", "center", "right"]).optional(),
+  vertical_align: z67.enum(["top", "middle", "bottom"]).optional(),
   font_size: distance.optional(),
-  subcircuit_id: z64.string().optional()
+  subcircuit_id: z67.string().optional()
 }).describe("Defines a cell within a schematic_table");
 expectTypesMatch(true);
-var schematic_sheet = z65.object({
-  type: z65.literal("schematic_sheet"),
+var schematic_sheet = z68.object({
+  type: z68.literal("schematic_sheet"),
   schematic_sheet_id: getZodPrefixedIdWithDefault("schematic_sheet"),
-  name: z65.string().optional(),
-  subcircuit_id: z65.string().optional()
+  name: z68.string().optional(),
+  subcircuit_id: z68.string().optional()
 }).describe(
   "Defines a schematic sheet or page that components can be placed on"
 );
 expectTypesMatch(true);
-var point_with_bulge = z66.object({
+var point_with_bulge = z69.object({
   x: distance,
   y: distance,
-  bulge: z66.number().optional()
+  bulge: z69.number().optional()
 });
 expectTypesMatch(true);
-var ring = z66.object({
-  vertices: z66.array(point_with_bulge)
+var ring = z69.object({
+  vertices: z69.array(point_with_bulge)
 });
 expectTypesMatch(true);
-var brep_shape = z66.object({
+var brep_shape = z69.object({
   outer_ring: ring,
-  inner_rings: z66.array(ring).default([])
+  inner_rings: z69.array(ring).default([])
 });
 expectTypesMatch(true);
-var pcb_route_hint = z67.object({
+var pcb_route_hint = z70.object({
   x: distance,
   y: distance,
-  via: z67.boolean().optional(),
+  via: z70.boolean().optional(),
   via_to_layer: layer_ref.optional()
 });
-var pcb_route_hints = z67.array(pcb_route_hint);
+var pcb_route_hints = z70.array(pcb_route_hint);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var route_hint_point = z68.object({
+var route_hint_point = z71.object({
   x: distance,
   y: distance,
-  via: z68.boolean().optional(),
+  via: z71.boolean().optional(),
   to_layer: layer_ref.optional(),
   trace_width: distance.optional()
 });
 expectTypesMatch(true);
-var pcb_component = z69.object({
-  type: z69.literal("pcb_component"),
+var pcb_component = z72.object({
+  type: z72.literal("pcb_component"),
   pcb_component_id: getZodPrefixedIdWithDefault("pcb_component"),
-  source_component_id: z69.string(),
+  source_component_id: z72.string(),
   center: point,
   layer: layer_ref,
   rotation,
   width: length,
   height: length,
-  do_not_place: z69.boolean().optional(),
-  subcircuit_id: z69.string().optional(),
-  pcb_group_id: z69.string().optional(),
-  obstructs_within_bounds: z69.boolean().default(true).describe(
+  do_not_place: z72.boolean().optional(),
+  subcircuit_id: z72.string().optional(),
+  pcb_group_id: z72.string().optional(),
+  position_mode: z72.enum(["packed", "relative_to_group_anchor", "none"]).optional(),
+  positioned_relative_to_pcb_group_id: z72.string().optional(),
+  obstructs_within_bounds: z72.boolean().default(true).describe(
     "Does this component take up all the space within its bounds on a layer. This is generally true except for when separated pin headers are being represented by a single component (in which case, chips can be placed between the pin headers) or for tall modules where chips fit underneath"
   )
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
-var pcb_hole_circle_or_square = z70.object({
-  type: z70.literal("pcb_hole"),
+var pcb_hole_circle = z73.object({
+  type: z73.literal("pcb_hole"),
+  pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  hole_shape: z73.literal("circle"),
+  hole_diameter: z73.number(),
+  x: distance,
+  y: distance,
+  is_covered_with_solder_mask: z73.boolean().optional(),
+  soldermask_margin: z73.number().optional()
+});
+var pcb_hole_circle_shape = pcb_hole_circle.describe(
+  "Defines a circular hole on the PCB"
+);
+expectTypesMatch(true);
+var pcb_hole_rect = z73.object({
+  type: z73.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z70.string().optional(),
-  subcircuit_id: z70.string().optional(),
-  hole_shape: z70.enum(["circle", "square"]),
-  hole_diameter: z70.number(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  hole_shape: z73.literal("rect"),
+  hole_width: z73.number(),
+  hole_height: z73.number(),
   x: distance,
-  y: distance
+  y: distance,
+  is_covered_with_solder_mask: z73.boolean().optional(),
+  soldermask_margin: z73.number().optional()
+});
+var pcb_hole_rect_shape = pcb_hole_rect.describe(
+  "Defines a rectangular (square-capable) hole on the PCB. Use equal width/height for square."
+);
+expectTypesMatch(true);
+var pcb_hole_circle_or_square = z73.object({
+  type: z73.literal("pcb_hole"),
+  pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  hole_shape: z73.enum(["circle", "square"]),
+  hole_diameter: z73.number(),
+  x: distance,
+  y: distance,
+  is_covered_with_solder_mask: z73.boolean().optional(),
+  soldermask_margin: z73.number().optional()
 });
 var pcb_hole_circle_or_square_shape = pcb_hole_circle_or_square.describe(
   "Defines a circular or square hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_oval = z70.object({
-  type: z70.literal("pcb_hole"),
+var pcb_hole_oval = z73.object({
+  type: z73.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z70.string().optional(),
-  subcircuit_id: z70.string().optional(),
-  hole_shape: z70.literal("oval"),
-  hole_width: z70.number(),
-  hole_height: z70.number(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  hole_shape: z73.literal("oval"),
+  hole_width: z73.number(),
+  hole_height: z73.number(),
   x: distance,
-  y: distance
+  y: distance,
+  is_covered_with_solder_mask: z73.boolean().optional(),
+  soldermask_margin: z73.number().optional()
 });
 var pcb_hole_oval_shape = pcb_hole_oval.describe(
   "Defines an oval hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_pill = z70.object({
-  type: z70.literal("pcb_hole"),
+var pcb_hole_pill = z73.object({
+  type: z73.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z70.string().optional(),
-  subcircuit_id: z70.string().optional(),
-  hole_shape: z70.literal("pill"),
-  hole_width: z70.number(),
-  hole_height: z70.number(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  hole_shape: z73.literal("pill"),
+  hole_width: z73.number(),
+  hole_height: z73.number(),
   x: distance,
-  y: distance
+  y: distance,
+  is_covered_with_solder_mask: z73.boolean().optional(),
+  soldermask_margin: z73.number().optional()
 });
 var pcb_hole_pill_shape = pcb_hole_pill.describe(
   "Defines a pill-shaped hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole_rotated_pill = z70.object({
-  type: z70.literal("pcb_hole"),
+var pcb_hole_rotated_pill = z73.object({
+  type: z73.literal("pcb_hole"),
   pcb_hole_id: getZodPrefixedIdWithDefault("pcb_hole"),
-  pcb_group_id: z70.string().optional(),
-  subcircuit_id: z70.string().optional(),
-  hole_shape: z70.literal("rotated_pill"),
-  hole_width: z70.number(),
-  hole_height: z70.number(),
+  pcb_group_id: z73.string().optional(),
+  subcircuit_id: z73.string().optional(),
+  hole_shape: z73.literal("rotated_pill"),
+  hole_width: z73.number(),
+  hole_height: z73.number(),
   x: distance,
   y: distance,
-  ccw_rotation: rotation
+  ccw_rotation: rotation,
+  is_covered_with_solder_mask: z73.boolean().optional(),
+  soldermask_margin: z73.number().optional()
 });
 var pcb_hole_rotated_pill_shape = pcb_hole_rotated_pill.describe(
   "Defines a rotated pill-shaped hole on the PCB"
 );
 expectTypesMatch(true);
-var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval).or(pcb_hole_pill).or(pcb_hole_rotated_pill);
-var pcb_plated_hole_circle = z71.object({
-  type: z71.literal("pcb_plated_hole"),
-  shape: z71.literal("circle"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  outer_diameter: z71.number(),
-  hole_diameter: z71.number(),
+var pcb_hole = pcb_hole_circle_or_square.or(pcb_hole_oval).or(pcb_hole_pill).or(pcb_hole_rotated_pill).or(pcb_hole_circle).or(pcb_hole_rect);
+var pcb_plated_hole_circle = z74.object({
+  type: z74.literal("pcb_plated_hole"),
+  shape: z74.literal("circle"),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
+  outer_diameter: z74.number(),
+  hole_diameter: z74.number(),
   x: distance,
   y: distance,
-  layers: z71.array(layer_ref),
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
+  layers: z74.array(layer_ref),
+  port_hints: z74.array(z74.string()).optional(),
+  pcb_component_id: z74.string().optional(),
+  pcb_port_id: z74.string().optional(),
+  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
+  soldermask_margin: z74.number().optional()
 });
-var pcb_plated_hole_oval = z71.object({
-  type: z71.literal("pcb_plated_hole"),
-  shape: z71.enum(["oval", "pill"]),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  outer_width: z71.number(),
-  outer_height: z71.number(),
-  hole_width: z71.number(),
-  hole_height: z71.number(),
+var pcb_plated_hole_oval = z74.object({
+  type: z74.literal("pcb_plated_hole"),
+  shape: z74.enum(["oval", "pill"]),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
+  outer_width: z74.number(),
+  outer_height: z74.number(),
+  hole_width: z74.number(),
+  hole_height: z74.number(),
+  is_covered_with_solder_mask: z74.boolean().optional(),
   x: distance,
   y: distance,
   ccw_rotation: rotation,
-  layers: z71.array(layer_ref),
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
+  layers: z74.array(layer_ref),
+  port_hints: z74.array(z74.string()).optional(),
+  pcb_component_id: z74.string().optional(),
+  pcb_port_id: z74.string().optional(),
+  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
+  soldermask_margin: z74.number().optional()
 });
-var pcb_circular_hole_with_rect_pad = z71.object({
-  type: z71.literal("pcb_plated_hole"),
-  shape: z71.literal("circular_hole_with_rect_pad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  hole_shape: z71.literal("circle"),
-  pad_shape: z71.literal("rect"),
-  hole_diameter: z71.number(),
-  rect_pad_width: z71.number(),
-  rect_pad_height: z71.number(),
-  rect_border_radius: z71.number().optional(),
+var pcb_circular_hole_with_rect_pad = z74.object({
+  type: z74.literal("pcb_plated_hole"),
+  shape: z74.literal("circular_hole_with_rect_pad"),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
+  hole_shape: z74.literal("circle"),
+  pad_shape: z74.literal("rect"),
+  hole_diameter: z74.number(),
+  rect_pad_width: z74.number(),
+  rect_pad_height: z74.number(),
+  rect_border_radius: z74.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
+  is_covered_with_solder_mask: z74.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z71.array(layer_ref),
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
+  layers: z74.array(layer_ref),
+  port_hints: z74.array(z74.string()).optional(),
+  pcb_component_id: z74.string().optional(),
+  pcb_port_id: z74.string().optional(),
+  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
+  soldermask_margin: z74.number().optional()
 });
-var pcb_pill_hole_with_rect_pad = z71.object({
-  type: z71.literal("pcb_plated_hole"),
-  shape: z71.literal("pill_hole_with_rect_pad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  hole_shape: z71.literal("pill"),
-  pad_shape: z71.literal("rect"),
-  hole_width: z71.number(),
-  hole_height: z71.number(),
-  rect_pad_width: z71.number(),
-  rect_pad_height: z71.number(),
-  rect_border_radius: z71.number().optional(),
+var pcb_pill_hole_with_rect_pad = z74.object({
+  type: z74.literal("pcb_plated_hole"),
+  shape: z74.literal("pill_hole_with_rect_pad"),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
+  hole_shape: z74.literal("pill"),
+  pad_shape: z74.literal("rect"),
+  hole_width: z74.number(),
+  hole_height: z74.number(),
+  rect_pad_width: z74.number(),
+  rect_pad_height: z74.number(),
+  rect_border_radius: z74.number().optional(),
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
+  is_covered_with_solder_mask: z74.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z71.array(layer_ref),
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
+  layers: z74.array(layer_ref),
+  port_hints: z74.array(z74.string()).optional(),
+  pcb_component_id: z74.string().optional(),
+  pcb_port_id: z74.string().optional(),
+  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
+  soldermask_margin: z74.number().optional()
 });
-var pcb_rotated_pill_hole_with_rect_pad = z71.object({
-  type: z71.literal("pcb_plated_hole"),
-  shape: z71.literal("rotated_pill_hole_with_rect_pad"),
-  pcb_group_id: z71.string().optional(),
-  subcircuit_id: z71.string().optional(),
-  hole_shape: z71.literal("rotated_pill"),
-  pad_shape: z71.literal("rect"),
-  hole_width: z71.number(),
-  hole_height: z71.number(),
+var pcb_rotated_pill_hole_with_rect_pad = z74.object({
+  type: z74.literal("pcb_plated_hole"),
+  shape: z74.literal("rotated_pill_hole_with_rect_pad"),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
+  hole_shape: z74.literal("rotated_pill"),
+  pad_shape: z74.literal("rect"),
+  hole_width: z74.number(),
+  hole_height: z74.number(),
   hole_ccw_rotation: rotation,
-  rect_pad_width: z71.number(),
-  rect_pad_height: z71.number(),
-  rect_border_radius: z71.number().optional(),
+  rect_pad_width: z74.number(),
+  rect_pad_height: z74.number(),
+  rect_border_radius: z74.number().optional(),
   rect_ccw_rotation: rotation,
   hole_offset_x: distance.default(0),
   hole_offset_y: distance.default(0),
+  is_covered_with_solder_mask: z74.boolean().optional(),
+  x: distance,
+  y: distance,
+  layers: z74.array(layer_ref),
+  port_hints: z74.array(z74.string()).optional(),
+  pcb_component_id: z74.string().optional(),
+  pcb_port_id: z74.string().optional(),
+  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
+  soldermask_margin: z74.number().optional()
+});
+var pcb_hole_with_polygon_pad = z74.object({
+  type: z74.literal("pcb_plated_hole"),
+  shape: z74.literal("hole_with_polygon_pad"),
+  pcb_group_id: z74.string().optional(),
+  subcircuit_id: z74.string().optional(),
+  hole_shape: z74.enum(["circle", "oval", "pill", "rotated_pill"]),
+  hole_diameter: z74.number().optional(),
+  hole_width: z74.number().optional(),
+  hole_height: z74.number().optional(),
+  pad_outline: z74.array(
+    z74.object({
+      x: distance,
+      y: distance
+    })
+  ).min(3),
+  hole_offset_x: distance.default(0),
+  hole_offset_y: distance.default(0),
+  is_covered_with_solder_mask: z74.boolean().optional(),
   x: distance,
   y: distance,
-  layers: z71.array(layer_ref),
-  port_hints: z71.array(z71.string()).optional(),
-  pcb_component_id: z71.string().optional(),
-  pcb_port_id: z71.string().optional(),
-  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole")
+  layers: z74.array(layer_ref),
+  port_hints: z74.array(z74.string()).optional(),
+  pcb_component_id: z74.string().optional(),
+  pcb_port_id: z74.string().optional(),
+  pcb_plated_hole_id: getZodPrefixedIdWithDefault("pcb_plated_hole"),
+  soldermask_margin: z74.number().optional()
 });
-var pcb_plated_hole = z71.union([
+var pcb_plated_hole = z74.union([
   pcb_plated_hole_circle,
   pcb_plated_hole_oval,
   pcb_circular_hole_with_rect_pad,
   pcb_pill_hole_with_rect_pad,
-  pcb_rotated_pill_hole_with_rect_pad
+  pcb_rotated_pill_hole_with_rect_pad,
+  pcb_hole_with_polygon_pad
 ]);
 expectTypesMatch(
   true
@@ -2335,120 +2456,127 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var pcb_port = z72.object({
-  type: z72.literal("pcb_port"),
+expectTypesMatch(true);
+var pcb_port = z75.object({
+  type: z75.literal("pcb_port"),
   pcb_port_id: getZodPrefixedIdWithDefault("pcb_port"),
-  pcb_group_id: z72.string().optional(),
-  subcircuit_id: z72.string().optional(),
-  source_port_id: z72.string(),
-  pcb_component_id: z72.string().optional(),
+  pcb_group_id: z75.string().optional(),
+  subcircuit_id: z75.string().optional(),
+  source_port_id: z75.string(),
+  pcb_component_id: z75.string().optional(),
   x: distance,
   y: distance,
-  layers: z72.array(layer_ref),
-  is_board_pinout: z72.boolean().optional()
+  layers: z75.array(layer_ref),
+  is_board_pinout: z75.boolean().optional()
 }).describe("Defines a port on the PCB");
 expectTypesMatch(true);
-var pcb_smtpad_circle = z73.object({
-  type: z73.literal("pcb_smtpad"),
-  shape: z73.literal("circle"),
+var pcb_smtpad_circle = z76.object({
+  type: z76.literal("pcb_smtpad"),
+  shape: z76.literal("circle"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z73.string().optional(),
-  subcircuit_id: z73.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   x: distance,
   y: distance,
-  radius: z73.number(),
+  radius: z76.number(),
   layer: layer_ref,
-  port_hints: z73.array(z73.string()).optional(),
-  pcb_component_id: z73.string().optional(),
-  pcb_port_id: z73.string().optional(),
-  is_covered_with_solder_mask: z73.boolean().optional()
+  port_hints: z76.array(z76.string()).optional(),
+  pcb_component_id: z76.string().optional(),
+  pcb_port_id: z76.string().optional(),
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
-var pcb_smtpad_rect = z73.object({
-  type: z73.literal("pcb_smtpad"),
-  shape: z73.literal("rect"),
+var pcb_smtpad_rect = z76.object({
+  type: z76.literal("pcb_smtpad"),
+  shape: z76.literal("rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z73.string().optional(),
-  subcircuit_id: z73.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   x: distance,
   y: distance,
-  width: z73.number(),
-  height: z73.number(),
-  rect_border_radius: z73.number().optional(),
-  corner_radius: z73.number().optional(),
+  width: z76.number(),
+  height: z76.number(),
+  rect_border_radius: z76.number().optional(),
+  corner_radius: z76.number().optional(),
   layer: layer_ref,
-  port_hints: z73.array(z73.string()).optional(),
-  pcb_component_id: z73.string().optional(),
-  pcb_port_id: z73.string().optional(),
-  is_covered_with_solder_mask: z73.boolean().optional()
+  port_hints: z76.array(z76.string()).optional(),
+  pcb_component_id: z76.string().optional(),
+  pcb_port_id: z76.string().optional(),
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
-var pcb_smtpad_rotated_rect = z73.object({
-  type: z73.literal("pcb_smtpad"),
-  shape: z73.literal("rotated_rect"),
+var pcb_smtpad_rotated_rect = z76.object({
+  type: z76.literal("pcb_smtpad"),
+  shape: z76.literal("rotated_rect"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z73.string().optional(),
-  subcircuit_id: z73.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   x: distance,
   y: distance,
-  width: z73.number(),
-  height: z73.number(),
-  rect_border_radius: z73.number().optional(),
-  corner_radius: z73.number().optional(),
+  width: z76.number(),
+  height: z76.number(),
+  rect_border_radius: z76.number().optional(),
+  corner_radius: z76.number().optional(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z73.array(z73.string()).optional(),
-  pcb_component_id: z73.string().optional(),
-  pcb_port_id: z73.string().optional(),
-  is_covered_with_solder_mask: z73.boolean().optional()
+  port_hints: z76.array(z76.string()).optional(),
+  pcb_component_id: z76.string().optional(),
+  pcb_port_id: z76.string().optional(),
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
-var pcb_smtpad_pill = z73.object({
-  type: z73.literal("pcb_smtpad"),
-  shape: z73.literal("pill"),
+var pcb_smtpad_pill = z76.object({
+  type: z76.literal("pcb_smtpad"),
+  shape: z76.literal("pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z73.string().optional(),
-  subcircuit_id: z73.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   x: distance,
   y: distance,
-  width: z73.number(),
-  height: z73.number(),
-  radius: z73.number(),
+  width: z76.number(),
+  height: z76.number(),
+  radius: z76.number(),
   layer: layer_ref,
-  port_hints: z73.array(z73.string()).optional(),
-  pcb_component_id: z73.string().optional(),
-  pcb_port_id: z73.string().optional(),
-  is_covered_with_solder_mask: z73.boolean().optional()
+  port_hints: z76.array(z76.string()).optional(),
+  pcb_component_id: z76.string().optional(),
+  pcb_port_id: z76.string().optional(),
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
-var pcb_smtpad_rotated_pill = z73.object({
-  type: z73.literal("pcb_smtpad"),
-  shape: z73.literal("rotated_pill"),
+var pcb_smtpad_rotated_pill = z76.object({
+  type: z76.literal("pcb_smtpad"),
+  shape: z76.literal("rotated_pill"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z73.string().optional(),
-  subcircuit_id: z73.string().optional(),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
   x: distance,
   y: distance,
-  width: z73.number(),
-  height: z73.number(),
-  radius: z73.number(),
+  width: z76.number(),
+  height: z76.number(),
+  radius: z76.number(),
   ccw_rotation: rotation,
   layer: layer_ref,
-  port_hints: z73.array(z73.string()).optional(),
-  pcb_component_id: z73.string().optional(),
-  pcb_port_id: z73.string().optional(),
-  is_covered_with_solder_mask: z73.boolean().optional()
+  port_hints: z76.array(z76.string()).optional(),
+  pcb_component_id: z76.string().optional(),
+  pcb_port_id: z76.string().optional(),
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
-var pcb_smtpad_polygon = z73.object({
-  type: z73.literal("pcb_smtpad"),
-  shape: z73.literal("polygon"),
+var pcb_smtpad_polygon = z76.object({
+  type: z76.literal("pcb_smtpad"),
+  shape: z76.literal("polygon"),
   pcb_smtpad_id: getZodPrefixedIdWithDefault("pcb_smtpad"),
-  pcb_group_id: z73.string().optional(),
-  subcircuit_id: z73.string().optional(),
-  points: z73.array(point),
+  pcb_group_id: z76.string().optional(),
+  subcircuit_id: z76.string().optional(),
+  points: z76.array(point),
   layer: layer_ref,
-  port_hints: z73.array(z73.string()).optional(),
-  pcb_component_id: z73.string().optional(),
-  pcb_port_id: z73.string().optional(),
-  is_covered_with_solder_mask: z73.boolean().optional()
+  port_hints: z76.array(z76.string()).optional(),
+  pcb_component_id: z76.string().optional(),
+  pcb_port_id: z76.string().optional(),
+  is_covered_with_solder_mask: z76.boolean().optional(),
+  soldermask_margin: z76.number().optional()
 });
-var pcb_smtpad = z73.discriminatedUnion("shape", [
+var pcb_smtpad = z76.discriminatedUnion("shape", [
   pcb_smtpad_circle,
   pcb_smtpad_rect,
   pcb_smtpad_rotated_rect,
@@ -2462,78 +2590,78 @@ expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var pcb_solder_paste_circle = z74.object({
-  type: z74.literal("pcb_solder_paste"),
-  shape: z74.literal("circle"),
+var pcb_solder_paste_circle = z77.object({
+  type: z77.literal("pcb_solder_paste"),
+  shape: z77.literal("circle"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
   x: distance,
   y: distance,
-  radius: z74.number(),
+  radius: z77.number(),
   layer: layer_ref,
-  pcb_component_id: z74.string().optional(),
-  pcb_smtpad_id: z74.string().optional()
+  pcb_component_id: z77.string().optional(),
+  pcb_smtpad_id: z77.string().optional()
 });
-var pcb_solder_paste_rect = z74.object({
-  type: z74.literal("pcb_solder_paste"),
-  shape: z74.literal("rect"),
+var pcb_solder_paste_rect = z77.object({
+  type: z77.literal("pcb_solder_paste"),
+  shape: z77.literal("rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
   x: distance,
   y: distance,
-  width: z74.number(),
-  height: z74.number(),
+  width: z77.number(),
+  height: z77.number(),
   layer: layer_ref,
-  pcb_component_id: z74.string().optional(),
-  pcb_smtpad_id: z74.string().optional()
+  pcb_component_id: z77.string().optional(),
+  pcb_smtpad_id: z77.string().optional()
 });
-var pcb_solder_paste_pill = z74.object({
-  type: z74.literal("pcb_solder_paste"),
-  shape: z74.literal("pill"),
+var pcb_solder_paste_pill = z77.object({
+  type: z77.literal("pcb_solder_paste"),
+  shape: z77.literal("pill"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
   x: distance,
   y: distance,
-  width: z74.number(),
-  height: z74.number(),
-  radius: z74.number(),
+  width: z77.number(),
+  height: z77.number(),
+  radius: z77.number(),
   layer: layer_ref,
-  pcb_component_id: z74.string().optional(),
-  pcb_smtpad_id: z74.string().optional()
+  pcb_component_id: z77.string().optional(),
+  pcb_smtpad_id: z77.string().optional()
 });
-var pcb_solder_paste_rotated_rect = z74.object({
-  type: z74.literal("pcb_solder_paste"),
-  shape: z74.literal("rotated_rect"),
+var pcb_solder_paste_rotated_rect = z77.object({
+  type: z77.literal("pcb_solder_paste"),
+  shape: z77.literal("rotated_rect"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
   x: distance,
   y: distance,
-  width: z74.number(),
-  height: z74.number(),
+  width: z77.number(),
+  height: z77.number(),
   ccw_rotation: distance,
   layer: layer_ref,
-  pcb_component_id: z74.string().optional(),
-  pcb_smtpad_id: z74.string().optional()
+  pcb_component_id: z77.string().optional(),
+  pcb_smtpad_id: z77.string().optional()
 });
-var pcb_solder_paste_oval = z74.object({
-  type: z74.literal("pcb_solder_paste"),
-  shape: z74.literal("oval"),
+var pcb_solder_paste_oval = z77.object({
+  type: z77.literal("pcb_solder_paste"),
+  shape: z77.literal("oval"),
   pcb_solder_paste_id: getZodPrefixedIdWithDefault("pcb_solder_paste"),
-  pcb_group_id: z74.string().optional(),
-  subcircuit_id: z74.string().optional(),
+  pcb_group_id: z77.string().optional(),
+  subcircuit_id: z77.string().optional(),
   x: distance,
   y: distance,
-  width: z74.number(),
-  height: z74.number(),
+  width: z77.number(),
+  height: z77.number(),
   layer: layer_ref,
-  pcb_component_id: z74.string().optional(),
-  pcb_smtpad_id: z74.string().optional()
+  pcb_component_id: z77.string().optional(),
+  pcb_smtpad_id: z77.string().optional()
 });
-var pcb_solder_paste = z74.union([
+var pcb_solder_paste = z77.union([
   pcb_solder_paste_circle,
   pcb_solder_paste_rect,
   pcb_solder_paste_pill,
@@ -2547,123 +2675,124 @@ expectTypesMatch(
   true
 );
 expectTypesMatch(true);
-var pcb_text = z75.object({
-  type: z75.literal("pcb_text"),
+var pcb_text = z78.object({
+  type: z78.literal("pcb_text"),
   pcb_text_id: getZodPrefixedIdWithDefault("pcb_text"),
-  pcb_group_id: z75.string().optional(),
-  subcircuit_id: z75.string().optional(),
-  text: z75.string(),
+  pcb_group_id: z78.string().optional(),
+  subcircuit_id: z78.string().optional(),
+  text: z78.string(),
   center: point,
   layer: layer_ref,
   width: length,
   height: length,
-  lines: z75.number(),
+  lines: z78.number(),
   // @ts-ignore
-  align: z75.enum(["bottom-left"])
+  align: z78.enum(["bottom-left"])
 }).describe("Defines text on the PCB");
 expectTypesMatch(true);
-var pcb_trace_route_point_wire = z76.object({
-  route_type: z76.literal("wire"),
+var pcb_trace_route_point_wire = z79.object({
+  route_type: z79.literal("wire"),
   x: distance,
   y: distance,
   width: distance,
-  start_pcb_port_id: z76.string().optional(),
-  end_pcb_port_id: z76.string().optional(),
+  start_pcb_port_id: z79.string().optional(),
+  end_pcb_port_id: z79.string().optional(),
   layer: layer_ref
 });
-var pcb_trace_route_point_via = z76.object({
-  route_type: z76.literal("via"),
+var pcb_trace_route_point_via = z79.object({
+  route_type: z79.literal("via"),
   x: distance,
   y: distance,
   hole_diameter: distance.optional(),
   outer_diameter: distance.optional(),
-  from_layer: z76.string(),
-  to_layer: z76.string()
+  from_layer: z79.string(),
+  to_layer: z79.string()
 });
-var pcb_trace_route_point = z76.union([
+var pcb_trace_route_point = z79.union([
   pcb_trace_route_point_wire,
   pcb_trace_route_point_via
 ]);
-var pcb_trace = z76.object({
-  type: z76.literal("pcb_trace"),
-  source_trace_id: z76.string().optional(),
-  pcb_component_id: z76.string().optional(),
+var pcb_trace = z79.object({
+  type: z79.literal("pcb_trace"),
+  source_trace_id: z79.string().optional(),
+  pcb_component_id: z79.string().optional(),
   pcb_trace_id: getZodPrefixedIdWithDefault("pcb_trace"),
-  pcb_group_id: z76.string().optional(),
-  subcircuit_id: z76.string().optional(),
-  route_thickness_mode: z76.enum(["constant", "interpolated"]).default("constant").optional(),
-  route_order_index: z76.number().optional(),
-  should_round_corners: z76.boolean().optional(),
-  trace_length: z76.number().optional(),
-  highlight_color: z76.string().optional(),
-  route: z76.array(pcb_trace_route_point)
+  pcb_group_id: z79.string().optional(),
+  subcircuit_id: z79.string().optional(),
+  route_thickness_mode: z79.enum(["constant", "interpolated"]).default("constant").optional(),
+  route_order_index: z79.number().optional(),
+  should_round_corners: z79.boolean().optional(),
+  trace_length: z79.number().optional(),
+  highlight_color: z79.string().optional(),
+  route: z79.array(pcb_trace_route_point)
 }).describe("Defines a trace on the PCB");
 expectTypesMatch(true);
 expectTypesMatch(true);
-var pcb_trace_error = z77.object({
-  type: z77.literal("pcb_trace_error"),
+var pcb_trace_error = z80.object({
+  type: z80.literal("pcb_trace_error"),
   pcb_trace_error_id: getZodPrefixedIdWithDefault("pcb_trace_error"),
-  error_type: z77.literal("pcb_trace_error").default("pcb_trace_error"),
-  message: z77.string(),
+  error_type: z80.literal("pcb_trace_error").default("pcb_trace_error"),
+  message: z80.string(),
   center: point.optional(),
-  pcb_trace_id: z77.string(),
-  source_trace_id: z77.string(),
-  pcb_component_ids: z77.array(z77.string()),
-  pcb_port_ids: z77.array(z77.string()),
-  subcircuit_id: z77.string().optional()
+  pcb_trace_id: z80.string(),
+  source_trace_id: z80.string(),
+  pcb_component_ids: z80.array(z80.string()),
+  pcb_port_ids: z80.array(z80.string()),
+  subcircuit_id: z80.string().optional()
 }).describe("Defines a trace error on the PCB");
 expectTypesMatch(true);
-var pcb_trace_missing_error = z78.object({
-  type: z78.literal("pcb_trace_missing_error"),
+var pcb_trace_missing_error = z81.object({
+  type: z81.literal("pcb_trace_missing_error"),
   pcb_trace_missing_error_id: getZodPrefixedIdWithDefault(
     "pcb_trace_missing_error"
   ),
-  error_type: z78.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
-  message: z78.string(),
+  error_type: z81.literal("pcb_trace_missing_error").default("pcb_trace_missing_error"),
+  message: z81.string(),
   center: point.optional(),
-  source_trace_id: z78.string(),
-  pcb_component_ids: z78.array(z78.string()),
-  pcb_port_ids: z78.array(z78.string()),
-  subcircuit_id: z78.string().optional()
+  source_trace_id: z81.string(),
+  pcb_component_ids: z81.array(z81.string()),
+  pcb_port_ids: z81.array(z81.string()),
+  subcircuit_id: z81.string().optional()
 }).describe(
   "Defines an error when a source trace has no corresponding PCB trace"
 );
 expectTypesMatch(true);
-var pcb_port_not_matched_error = z79.object({
-  type: z79.literal("pcb_port_not_matched_error"),
+var pcb_port_not_matched_error = z82.object({
+  type: z82.literal("pcb_port_not_matched_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z79.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
-  message: z79.string(),
-  pcb_component_ids: z79.array(z79.string()),
-  subcircuit_id: z79.string().optional()
+  error_type: z82.literal("pcb_port_not_matched_error").default("pcb_port_not_matched_error"),
+  message: z82.string(),
+  pcb_component_ids: z82.array(z82.string()),
+  subcircuit_id: z82.string().optional()
 }).describe("Defines a trace error on the PCB where a port is not matched");
 expectTypesMatch(true);
-var pcb_port_not_connected_error = z80.object({
-  type: z80.literal("pcb_port_not_connected_error"),
+var pcb_port_not_connected_error = z83.object({
+  type: z83.literal("pcb_port_not_connected_error"),
   pcb_port_not_connected_error_id: getZodPrefixedIdWithDefault(
     "pcb_port_not_connected_error"
   ),
-  error_type: z80.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
-  message: z80.string(),
-  pcb_port_ids: z80.array(z80.string()),
-  pcb_component_ids: z80.array(z80.string()),
-  subcircuit_id: z80.string().optional()
+  error_type: z83.literal("pcb_port_not_connected_error").default("pcb_port_not_connected_error"),
+  message: z83.string(),
+  pcb_port_ids: z83.array(z83.string()),
+  pcb_component_ids: z83.array(z83.string()),
+  subcircuit_id: z83.string().optional()
 }).describe("Defines an error when a pcb port is not connected to any trace");
 expectTypesMatch(
   true
 );
-var pcb_net = z81.object({
-  type: z81.literal("pcb_net"),
+var pcb_net = z84.object({
+  type: z84.literal("pcb_net"),
   pcb_net_id: getZodPrefixedIdWithDefault("pcb_net"),
-  source_net_id: z81.string().optional(),
-  highlight_color: z81.string().optional()
+  source_net_id: z84.string().optional(),
+  highlight_color: z84.string().optional()
 }).describe("Defines a net on the PCB");
 expectTypesMatch(true);
-var pcb_via = z82.object({
-  type: z82.literal("pcb_via"),
+var pcb_via = z85.object({
+  type: z85.literal("pcb_via"),
   pcb_via_id: getZodPrefixedIdWithDefault("pcb_via"),
-  pcb_group_id: z82.string().optional(),
-  subcircuit_id: z82.string().optional(),
+  pcb_group_id: z85.string().optional(),
+  subcircuit_id: z85.string().optional(),
+  subcircuit_connectivity_map_key: z85.string().optional(),
   x: distance,
   y: distance,
   outer_diameter: distance.default("0.6mm"),
@@ -2672,56 +2801,61 @@ var pcb_via = z82.object({
   from_layer: layer_ref.optional(),
   /** @deprecated */
   to_layer: layer_ref.optional(),
-  layers: z82.array(layer_ref),
-  pcb_trace_id: z82.string().optional()
+  layers: z85.array(layer_ref),
+  pcb_trace_id: z85.string().optional(),
+  net_is_assignable: z85.boolean().optional(),
+  net_assigned: z85.boolean().optional(),
+  is_tented: z85.boolean().optional()
 }).describe("Defines a via on the PCB");
 expectTypesMatch(true);
-var pcb_board = z83.object({
-  type: z83.literal("pcb_board"),
+var pcb_board = z86.object({
+  type: z86.literal("pcb_board"),
   pcb_board_id: getZodPrefixedIdWithDefault("pcb_board"),
-  pcb_panel_id: z83.string().optional(),
-  is_subcircuit: z83.boolean().optional(),
-  subcircuit_id: z83.string().optional(),
-  width: length,
-  height: length,
+  pcb_panel_id: z86.string().optional(),
+  is_subcircuit: z86.boolean().optional(),
+  subcircuit_id: z86.string().optional(),
+  width: length.optional(),
+  height: length.optional(),
   center: point,
   thickness: length.optional().default(1.4),
-  num_layers: z83.number().optional().default(4),
-  outline: z83.array(point).optional(),
-  material: z83.enum(["fr4", "fr1"]).default("fr4")
+  num_layers: z86.number().optional().default(4),
+  outline: z86.array(point).optional(),
+  shape: z86.enum(["rect", "polygon"]).optional(),
+  material: z86.enum(["fr4", "fr1"]).default("fr4")
 }).describe("Defines the board outline of the PCB");
 expectTypesMatch(true);
-var pcb_panel = z84.object({
-  type: z84.literal("pcb_panel"),
+var pcb_panel = z87.object({
+  type: z87.literal("pcb_panel"),
   pcb_panel_id: getZodPrefixedIdWithDefault("pcb_panel"),
   width: length,
   height: length,
-  covered_with_solder_mask: z84.boolean().optional().default(true)
+  center: point,
+  covered_with_solder_mask: z87.boolean().optional().default(true)
 }).describe("Defines a PCB panel that can contain multiple boards");
 expectTypesMatch(true);
-var pcb_placement_error = z85.object({
-  type: z85.literal("pcb_placement_error"),
+var pcb_placement_error = z88.object({
+  type: z88.literal("pcb_placement_error"),
   pcb_placement_error_id: getZodPrefixedIdWithDefault("pcb_placement_error"),
-  error_type: z85.literal("pcb_placement_error").default("pcb_placement_error"),
-  message: z85.string(),
-  subcircuit_id: z85.string().optional()
+  error_type: z88.literal("pcb_placement_error").default("pcb_placement_error"),
+  message: z88.string(),
+  subcircuit_id: z88.string().optional()
 }).describe("Defines a placement error on the PCB");
 expectTypesMatch(true);
-var pcb_trace_hint = z86.object({
-  type: z86.literal("pcb_trace_hint"),
+var pcb_trace_hint = z89.object({
+  type: z89.literal("pcb_trace_hint"),
   pcb_trace_hint_id: getZodPrefixedIdWithDefault("pcb_trace_hint"),
-  pcb_port_id: z86.string(),
-  pcb_component_id: z86.string(),
-  route: z86.array(route_hint_point),
-  subcircuit_id: z86.string().optional()
+  pcb_port_id: z89.string(),
+  pcb_component_id: z89.string(),
+  route: z89.array(route_hint_point),
+  subcircuit_id: z89.string().optional()
 }).describe("A hint that can be used during generation of a PCB trace");
 expectTypesMatch(true);
-var pcb_silkscreen_line = z87.object({
-  type: z87.literal("pcb_silkscreen_line"),
+var pcb_silkscreen_line = z90.object({
+  type: z90.literal("pcb_silkscreen_line"),
   pcb_silkscreen_line_id: getZodPrefixedIdWithDefault("pcb_silkscreen_line"),
-  pcb_component_id: z87.string(),
-  pcb_group_id: z87.string().optional(),
-  subcircuit_id: z87.string().optional(),
+  pcb_component_id: z90.string(),
+  pcb_group_id: z90.string().optional(),
+  subcircuit_id: z90.string().optional(),
   stroke_width: distance.default("0.1mm"),
   x1: distance,
   y1: distance,
@@ -2730,28 +2864,28 @@ var pcb_silkscreen_line = z87.object({
   layer: visible_layer
 }).describe("Defines a silkscreen line on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_path = z88.object({
-  type: z88.literal("pcb_silkscreen_path"),
+var pcb_silkscreen_path = z91.object({
+  type: z91.literal("pcb_silkscreen_path"),
   pcb_silkscreen_path_id: getZodPrefixedIdWithDefault("pcb_silkscreen_path"),
-  pcb_component_id: z88.string(),
-  pcb_group_id: z88.string().optional(),
-  subcircuit_id: z88.string().optional(),
+  pcb_component_id: z91.string(),
+  pcb_group_id: z91.string().optional(),
+  subcircuit_id: z91.string().optional(),
   layer: visible_layer,
-  route: z88.array(point),
+  route: z91.array(point),
   stroke_width: length
 }).describe("Defines a silkscreen path on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_text = z89.object({
-  type: z89.literal("pcb_silkscreen_text"),
+var pcb_silkscreen_text = z92.object({
+  type: z92.literal("pcb_silkscreen_text"),
   pcb_silkscreen_text_id: getZodPrefixedIdWithDefault("pcb_silkscreen_text"),
-  pcb_group_id: z89.string().optional(),
-  subcircuit_id: z89.string().optional(),
-  font: z89.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z92.string().optional(),
+  subcircuit_id: z92.string().optional(),
+  font: z92.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z89.string(),
-  text: z89.string(),
-  is_knockout: z89.boolean().default(false).optional(),
-  knockout_padding: z89.object({
+  pcb_component_id: z92.string(),
+  text: z92.string(),
+  is_knockout: z92.boolean().default(false).optional(),
+  knockout_padding: z92.object({
     left: length,
     top: length,
     bottom: length,
@@ -2762,24 +2896,24 @@ var pcb_silkscreen_text = z89.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z89.number().optional(),
+  ccw_rotation: z92.number().optional(),
   layer: layer_ref,
-  is_mirrored: z89.boolean().default(false).optional(),
+  is_mirrored: z92.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines silkscreen text on the PCB");
 expectTypesMatch(true);
-var pcb_copper_text = z90.object({
-  type: z90.literal("pcb_copper_text"),
+var pcb_copper_text = z93.object({
+  type: z93.literal("pcb_copper_text"),
   pcb_copper_text_id: getZodPrefixedIdWithDefault("pcb_copper_text"),
-  pcb_group_id: z90.string().optional(),
-  subcircuit_id: z90.string().optional(),
-  font: z90.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_group_id: z93.string().optional(),
+  subcircuit_id: z93.string().optional(),
+  font: z93.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("0.2mm"),
-  pcb_component_id: z90.string(),
-  text: z90.string(),
-  is_knockout: z90.boolean().default(false).optional(),
-  knockout_padding: z90.object({
+  pcb_component_id: z93.string(),
+  text: z93.string(),
+  is_knockout: z93.boolean().default(false).optional(),
+  knockout_padding: z93.object({
     left: length,
     top: length,
     bottom: length,
@@ -2790,439 +2924,454 @@ var pcb_copper_text = z90.object({
     bottom: "0.2mm",
     right: "0.2mm"
   }).optional(),
-  ccw_rotation: z90.number().optional(),
+  ccw_rotation: z93.number().optional(),
   layer: layer_ref,
-  is_mirrored: z90.boolean().default(false).optional(),
+  is_mirrored: z93.boolean().default(false).optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
   anchor_alignment: ninePointAnchor.default("center")
 }).describe("Defines copper text on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_rect = z91.object({
-  type: z91.literal("pcb_silkscreen_rect"),
+var pcb_silkscreen_rect = z94.object({
+  type: z94.literal("pcb_silkscreen_rect"),
   pcb_silkscreen_rect_id: getZodPrefixedIdWithDefault("pcb_silkscreen_rect"),
-  pcb_component_id: z91.string(),
-  pcb_group_id: z91.string().optional(),
-  subcircuit_id: z91.string().optional(),
+  pcb_component_id: z94.string(),
+  pcb_group_id: z94.string().optional(),
+  subcircuit_id: z94.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: layer_ref,
   stroke_width: length.default("1mm"),
   corner_radius: length.optional(),
-  is_filled: z91.boolean().default(true).optional(),
-  has_stroke: z91.boolean().optional(),
-  is_stroke_dashed: z91.boolean().optional()
+  is_filled: z94.boolean().default(true).optional(),
+  has_stroke: z94.boolean().optional(),
+  is_stroke_dashed: z94.boolean().optional()
 }).describe("Defines a silkscreen rect on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_circle = z92.object({
-  type: z92.literal("pcb_silkscreen_circle"),
+var pcb_silkscreen_circle = z95.object({
+  type: z95.literal("pcb_silkscreen_circle"),
   pcb_silkscreen_circle_id: getZodPrefixedIdWithDefault(
     "pcb_silkscreen_circle"
   ),
-  pcb_component_id: z92.string(),
-  pcb_group_id: z92.string().optional(),
-  subcircuit_id: z92.string().optional(),
+  pcb_component_id: z95.string(),
+  pcb_group_id: z95.string().optional(),
+  subcircuit_id: z95.string().optional(),
   center: point,
   radius: length,
   layer: visible_layer,
   stroke_width: length.default("1mm")
 }).describe("Defines a silkscreen circle on the PCB");
 expectTypesMatch(true);
-var pcb_silkscreen_oval = z93.object({
-  type: z93.literal("pcb_silkscreen_oval"),
+var pcb_silkscreen_oval = z96.object({
+  type: z96.literal("pcb_silkscreen_oval"),
   pcb_silkscreen_oval_id: getZodPrefixedIdWithDefault("pcb_silkscreen_oval"),
-  pcb_component_id: z93.string(),
-  pcb_group_id: z93.string().optional(),
-  subcircuit_id: z93.string().optional(),
+  pcb_component_id: z96.string(),
+  pcb_group_id: z96.string().optional(),
+  subcircuit_id: z96.string().optional(),
   center: point,
   radius_x: distance,
   radius_y: distance,
   layer: visible_layer
 }).describe("Defines a silkscreen oval on the PCB");
 expectTypesMatch(true);
-var pcb_fabrication_note_text = z94.object({
-  type: z94.literal("pcb_fabrication_note_text"),
+var pcb_fabrication_note_text = z97.object({
+  type: z97.literal("pcb_fabrication_note_text"),
   pcb_fabrication_note_text_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_text"
   ),
-  subcircuit_id: z94.string().optional(),
-  pcb_group_id: z94.string().optional(),
-  font: z94.literal("tscircuit2024").default("tscircuit2024"),
+  subcircuit_id: z97.string().optional(),
+  pcb_group_id: z97.string().optional(),
+  font: z97.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  pcb_component_id: z94.string(),
-  text: z94.string(),
+  pcb_component_id: z97.string(),
+  text: z97.string(),
   layer: visible_layer,
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z94.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z94.string().optional()
+  anchor_alignment: z97.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z97.string().optional()
 }).describe(
   "Defines a fabrication note in text on the PCB, useful for leaving notes for assemblers or fabricators"
 );
 expectTypesMatch(true);
-var pcb_fabrication_note_path = z95.object({
-  type: z95.literal("pcb_fabrication_note_path"),
+var pcb_fabrication_note_path = z98.object({
+  type: z98.literal("pcb_fabrication_note_path"),
   pcb_fabrication_note_path_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_path"
   ),
-  pcb_component_id: z95.string(),
-  subcircuit_id: z95.string().optional(),
+  pcb_component_id: z98.string(),
+  subcircuit_id: z98.string().optional(),
   layer: layer_ref,
-  route: z95.array(point),
+  route: z98.array(point),
   stroke_width: length,
-  color: z95.string().optional()
+  color: z98.string().optional()
 }).describe(
   "Defines a fabrication path on the PCB for fabricators or assemblers"
 );
 expectTypesMatch(true);
-var pcb_fabrication_note_rect = z96.object({
-  type: z96.literal("pcb_fabrication_note_rect"),
+var pcb_fabrication_note_rect = z99.object({
+  type: z99.literal("pcb_fabrication_note_rect"),
   pcb_fabrication_note_rect_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_rect"
   ),
-  pcb_component_id: z96.string(),
-  pcb_group_id: z96.string().optional(),
-  subcircuit_id: z96.string().optional(),
+  pcb_component_id: z99.string(),
+  pcb_group_id: z99.string().optional(),
+  subcircuit_id: z99.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
   stroke_width: length.default("0.1mm"),
   corner_radius: length.optional(),
-  is_filled: z96.boolean().optional(),
-  has_stroke: z96.boolean().optional(),
-  is_stroke_dashed: z96.boolean().optional(),
-  color: z96.string().optional()
+  is_filled: z99.boolean().optional(),
+  has_stroke: z99.boolean().optional(),
+  is_stroke_dashed: z99.boolean().optional(),
+  color: z99.string().optional()
 }).describe("Defines a fabrication note rectangle on the PCB");
 expectTypesMatch(true);
-var pcb_fabrication_note_dimension = z97.object({
-  type: z97.literal("pcb_fabrication_note_dimension"),
+var pcb_fabrication_note_dimension = z100.object({
+  type: z100.literal("pcb_fabrication_note_dimension"),
   pcb_fabrication_note_dimension_id: getZodPrefixedIdWithDefault(
     "pcb_fabrication_note_dimension"
   ),
-  pcb_component_id: z97.string(),
-  pcb_group_id: z97.string().optional(),
-  subcircuit_id: z97.string().optional(),
+  pcb_component_id: z100.string(),
+  pcb_group_id: z100.string().optional(),
+  subcircuit_id: z100.string().optional(),
   layer: visible_layer,
   from: point,
   to: point,
-  text: z97.string().optional(),
-  text_ccw_rotation: z97.number().optional(),
+  text: z100.string().optional(),
+  text_ccw_rotation: z100.number().optional(),
   offset: length.optional(),
   offset_distance: length.optional(),
-  offset_direction: z97.object({
-    x: z97.number(),
-    y: z97.number()
+  offset_direction: z100.object({
+    x: z100.number(),
+    y: z100.number()
   }).optional(),
-  font: z97.literal("tscircuit2024").default("tscircuit2024"),
+  font: z100.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z97.string().optional(),
+  color: z100.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB fabrication notes");
 expectTypesMatch(true);
-var pcb_note_text = z98.object({
-  type: z98.literal("pcb_note_text"),
+var pcb_note_text = z101.object({
+  type: z101.literal("pcb_note_text"),
   pcb_note_text_id: getZodPrefixedIdWithDefault("pcb_note_text"),
-  pcb_component_id: z98.string().optional(),
-  pcb_group_id: z98.string().optional(),
-  subcircuit_id: z98.string().optional(),
-  name: z98.string().optional(),
-  font: z98.literal("tscircuit2024").default("tscircuit2024"),
+  pcb_component_id: z101.string().optional(),
+  pcb_group_id: z101.string().optional(),
+  subcircuit_id: z101.string().optional(),
+  name: z101.string().optional(),
+  font: z101.literal("tscircuit2024").default("tscircuit2024"),
   font_size: distance.default("1mm"),
-  text: z98.string().optional(),
+  text: z101.string().optional(),
   anchor_position: point.default({ x: 0, y: 0 }),
-  anchor_alignment: z98.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
-  color: z98.string().optional()
+  anchor_alignment: z101.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).default("center"),
+  color: z101.string().optional()
 }).describe("Defines a documentation note in text on the PCB");
 expectTypesMatch(true);
-var pcb_note_rect = z99.object({
-  type: z99.literal("pcb_note_rect"),
+var pcb_note_rect = z102.object({
+  type: z102.literal("pcb_note_rect"),
   pcb_note_rect_id: getZodPrefixedIdWithDefault("pcb_note_rect"),
-  pcb_component_id: z99.string().optional(),
-  pcb_group_id: z99.string().optional(),
-  subcircuit_id: z99.string().optional(),
-  name: z99.string().optional(),
-  text: z99.string().optional(),
+  pcb_component_id: z102.string().optional(),
+  pcb_group_id: z102.string().optional(),
+  subcircuit_id: z102.string().optional(),
+  name: z102.string().optional(),
+  text: z102.string().optional(),
   center: point,
   width: length,
   height: length,
   stroke_width: length.default("0.1mm"),
   corner_radius: length.optional(),
-  is_filled: z99.boolean().optional(),
-  has_stroke: z99.boolean().optional(),
-  is_stroke_dashed: z99.boolean().optional(),
-  color: z99.string().optional()
+  is_filled: z102.boolean().optional(),
+  has_stroke: z102.boolean().optional(),
+  is_stroke_dashed: z102.boolean().optional(),
+  color: z102.string().optional()
 }).describe("Defines a rectangular documentation note on the PCB");
 expectTypesMatch(true);
-var pcb_note_path = z100.object({
-  type: z100.literal("pcb_note_path"),
+var pcb_note_path = z103.object({
+  type: z103.literal("pcb_note_path"),
   pcb_note_path_id: getZodPrefixedIdWithDefault("pcb_note_path"),
-  pcb_component_id: z100.string().optional(),
-  pcb_group_id: z100.string().optional(),
-  subcircuit_id: z100.string().optional(),
-  name: z100.string().optional(),
-  text: z100.string().optional(),
-  route: z100.array(point),
+  pcb_component_id: z103.string().optional(),
+  pcb_group_id: z103.string().optional(),
+  subcircuit_id: z103.string().optional(),
+  name: z103.string().optional(),
+  text: z103.string().optional(),
+  route: z103.array(point),
   stroke_width: length.default("0.1mm"),
-  color: z100.string().optional()
+  color: z103.string().optional()
 }).describe("Defines a polyline documentation note on the PCB");
 expectTypesMatch(true);
-var pcb_note_line = z101.object({
-  type: z101.literal("pcb_note_line"),
+var pcb_note_line = z104.object({
+  type: z104.literal("pcb_note_line"),
   pcb_note_line_id: getZodPrefixedIdWithDefault("pcb_note_line"),
-  pcb_component_id: z101.string().optional(),
-  pcb_group_id: z101.string().optional(),
-  subcircuit_id: z101.string().optional(),
-  name: z101.string().optional(),
-  text: z101.string().optional(),
+  pcb_component_id: z104.string().optional(),
+  pcb_group_id: z104.string().optional(),
+  subcircuit_id: z104.string().optional(),
+  name: z104.string().optional(),
+  text: z104.string().optional(),
   x1: distance,
   y1: distance,
   x2: distance,
   y2: distance,
   stroke_width: distance.default("0.1mm"),
-  color: z101.string().optional(),
-  is_dashed: z101.boolean().optional()
+  color: z104.string().optional(),
+  is_dashed: z104.boolean().optional()
 }).describe("Defines a straight documentation note line on the PCB");
 expectTypesMatch(true);
-var pcb_note_dimension = z102.object({
-  type: z102.literal("pcb_note_dimension"),
+var pcb_note_dimension = z105.object({
+  type: z105.literal("pcb_note_dimension"),
   pcb_note_dimension_id: getZodPrefixedIdWithDefault("pcb_note_dimension"),
-  pcb_component_id: z102.string().optional(),
-  pcb_group_id: z102.string().optional(),
-  subcircuit_id: z102.string().optional(),
-  name: z102.string().optional(),
+  pcb_component_id: z105.string().optional(),
+  pcb_group_id: z105.string().optional(),
+  subcircuit_id: z105.string().optional(),
+  name: z105.string().optional(),
   from: point,
   to: point,
-  text: z102.string().optional(),
-  text_ccw_rotation: z102.number().optional(),
+  text: z105.string().optional(),
+  text_ccw_rotation: z105.number().optional(),
   offset_distance: length.optional(),
-  offset_direction: z102.object({
-    x: z102.number(),
-    y: z102.number()
+  offset_direction: z105.object({
+    x: z105.number(),
+    y: z105.number()
   }).optional(),
-  font: z102.literal("tscircuit2024").default("tscircuit2024"),
+  font: z105.literal("tscircuit2024").default("tscircuit2024"),
   font_size: length.default("1mm"),
-  color: z102.string().optional(),
+  color: z105.string().optional(),
   arrow_size: length.default("1mm")
 }).describe("Defines a measurement annotation within PCB documentation notes");
 expectTypesMatch(true);
-var pcb_footprint_overlap_error = z103.object({
-  type: z103.literal("pcb_footprint_overlap_error"),
+var pcb_footprint_overlap_error = z106.object({
+  type: z106.literal("pcb_footprint_overlap_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z103.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
-  message: z103.string(),
-  pcb_smtpad_ids: z103.array(z103.string()).optional(),
-  pcb_plated_hole_ids: z103.array(z103.string()).optional(),
-  pcb_hole_ids: z103.array(z103.string()).optional(),
-  pcb_keepout_ids: z103.array(z103.string()).optional()
+  error_type: z106.literal("pcb_footprint_overlap_error").default("pcb_footprint_overlap_error"),
+  message: z106.string(),
+  pcb_smtpad_ids: z106.array(z106.string()).optional(),
+  pcb_plated_hole_ids: z106.array(z106.string()).optional(),
+  pcb_hole_ids: z106.array(z106.string()).optional(),
+  pcb_keepout_ids: z106.array(z106.string()).optional()
 }).describe("Error emitted when a pcb footprint overlaps with another element");
 expectTypesMatch(
   true
 );
-var pcb_keepout = z104.object({
-  type: z104.literal("pcb_keepout"),
-  shape: z104.literal("rect"),
-  pcb_group_id: z104.string().optional(),
-  subcircuit_id: z104.string().optional(),
+var pcb_keepout = z107.object({
+  type: z107.literal("pcb_keepout"),
+  shape: z107.literal("rect"),
+  pcb_group_id: z107.string().optional(),
+  subcircuit_id: z107.string().optional(),
   center: point,
   width: distance,
   height: distance,
-  pcb_keepout_id: z104.string(),
-  layers: z104.array(z104.string()),
+  pcb_keepout_id: z107.string(),
+  layers: z107.array(z107.string()),
   // Specify layers where the keepout applies
-  description: z104.string().optional()
+  description: z107.string().optional()
   // Optional description of the keepout
 }).or(
-  z104.object({
-    type: z104.literal("pcb_keepout"),
-    shape: z104.literal("circle"),
-    pcb_group_id: z104.string().optional(),
-    subcircuit_id: z104.string().optional(),
+  z107.object({
+    type: z107.literal("pcb_keepout"),
+    shape: z107.literal("circle"),
+    pcb_group_id: z107.string().optional(),
+    subcircuit_id: z107.string().optional(),
     center: point,
     radius: distance,
-    pcb_keepout_id: z104.string(),
-    layers: z104.array(z104.string()),
+    pcb_keepout_id: z107.string(),
+    layers: z107.array(z107.string()),
     // Specify layers where the keepout applies
-    description: z104.string().optional()
+    description: z107.string().optional()
     // Optional description of the keepout
   })
 );
 expectTypesMatch(true);
-var pcb_cutout_base = z105.object({
-  type: z105.literal("pcb_cutout"),
+var pcb_cutout_base = z108.object({
+  type: z108.literal("pcb_cutout"),
   pcb_cutout_id: getZodPrefixedIdWithDefault("pcb_cutout"),
-  pcb_group_id: z105.string().optional(),
-  subcircuit_id: z105.string().optional()
+  pcb_group_id: z108.string().optional(),
+  subcircuit_id: z108.string().optional(),
+  pcb_board_id: z108.string().optional(),
+  pcb_panel_id: z108.string().optional()
 });
 var pcb_cutout_rect = pcb_cutout_base.extend({
-  shape: z105.literal("rect"),
+  shape: z108.literal("rect"),
   center: point,
   width: length,
   height: length,
-  rotation: rotation.optional()
+  rotation: rotation.optional(),
+  corner_radius: length.optional()
 });
 expectTypesMatch(true);
 var pcb_cutout_circle = pcb_cutout_base.extend({
-  shape: z105.literal("circle"),
+  shape: z108.literal("circle"),
   center: point,
   radius: length
 });
 expectTypesMatch(true);
 var pcb_cutout_polygon = pcb_cutout_base.extend({
-  shape: z105.literal("polygon"),
-  points: z105.array(point)
+  shape: z108.literal("polygon"),
+  points: z108.array(point)
+});
+expectTypesMatch(true);
+var pcb_cutout_path = pcb_cutout_base.extend({
+  shape: z108.literal("path"),
+  route: z108.array(point),
+  slot_width: length,
+  slot_length: length.optional(),
+  space_between_slots: length.optional(),
+  slot_corner_radius: length.optional()
 });
 expectTypesMatch(true);
-var pcb_cutout = z105.discriminatedUnion("shape", [
+var pcb_cutout = z108.discriminatedUnion("shape", [
   pcb_cutout_rect,
   pcb_cutout_circle,
-  pcb_cutout_polygon
+  pcb_cutout_polygon,
+  pcb_cutout_path
 ]).describe("Defines a cutout on the PCB, removing board material.");
 expectTypesMatch(true);
-var pcb_missing_footprint_error = z106.object({
-  type: z106.literal("pcb_missing_footprint_error"),
+var pcb_missing_footprint_error = z109.object({
+  type: z109.literal("pcb_missing_footprint_error"),
   pcb_missing_footprint_error_id: getZodPrefixedIdWithDefault(
     "pcb_missing_footprint_error"
   ),
-  pcb_group_id: z106.string().optional(),
-  subcircuit_id: z106.string().optional(),
-  error_type: z106.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
-  source_component_id: z106.string(),
-  message: z106.string()
+  pcb_group_id: z109.string().optional(),
+  subcircuit_id: z109.string().optional(),
+  error_type: z109.literal("pcb_missing_footprint_error").default("pcb_missing_footprint_error"),
+  source_component_id: z109.string(),
+  message: z109.string()
 }).describe("Defines a missing footprint error on the PCB");
 expectTypesMatch(
   true
 );
-var external_footprint_load_error = z107.object({
-  type: z107.literal("external_footprint_load_error"),
+var external_footprint_load_error = z110.object({
+  type: z110.literal("external_footprint_load_error"),
   external_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "external_footprint_load_error"
   ),
-  pcb_component_id: z107.string(),
-  source_component_id: z107.string(),
-  pcb_group_id: z107.string().optional(),
-  subcircuit_id: z107.string().optional(),
-  footprinter_string: z107.string().optional(),
-  error_type: z107.literal("external_footprint_load_error").default("external_footprint_load_error"),
-  message: z107.string()
+  pcb_component_id: z110.string(),
+  source_component_id: z110.string(),
+  pcb_group_id: z110.string().optional(),
+  subcircuit_id: z110.string().optional(),
+  footprinter_string: z110.string().optional(),
+  error_type: z110.literal("external_footprint_load_error").default("external_footprint_load_error"),
+  message: z110.string()
 }).describe("Defines an error when an external footprint fails to load");
 expectTypesMatch(true);
-var circuit_json_footprint_load_error = z108.object({
-  type: z108.literal("circuit_json_footprint_load_error"),
+var circuit_json_footprint_load_error = z111.object({
+  type: z111.literal("circuit_json_footprint_load_error"),
   circuit_json_footprint_load_error_id: getZodPrefixedIdWithDefault(
     "circuit_json_footprint_load_error"
   ),
-  pcb_component_id: z108.string(),
-  source_component_id: z108.string(),
-  pcb_group_id: z108.string().optional(),
-  subcircuit_id: z108.string().optional(),
-  error_type: z108.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
-  message: z108.string(),
-  circuit_json: z108.array(z108.any()).optional()
+  pcb_component_id: z111.string(),
+  source_component_id: z111.string(),
+  pcb_group_id: z111.string().optional(),
+  subcircuit_id: z111.string().optional(),
+  error_type: z111.literal("circuit_json_footprint_load_error").default("circuit_json_footprint_load_error"),
+  message: z111.string(),
+  circuit_json: z111.array(z111.any()).optional()
 }).describe("Defines an error when a circuit JSON footprint fails to load");
 expectTypesMatch(true);
-var pcb_group = z109.object({
-  type: z109.literal("pcb_group"),
+var pcb_group = z112.object({
+  type: z112.literal("pcb_group"),
   pcb_group_id: getZodPrefixedIdWithDefault("pcb_group"),
-  source_group_id: z109.string(),
-  is_subcircuit: z109.boolean().optional(),
-  subcircuit_id: z109.string().optional(),
+  source_group_id: z112.string(),
+  is_subcircuit: z112.boolean().optional(),
+  subcircuit_id: z112.string().optional(),
   width: length.optional(),
   height: length.optional(),
   center: point,
-  outline: z109.array(point).optional(),
+  outline: z112.array(point).optional(),
   anchor_position: point.optional(),
-  anchor_alignment: z109.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).optional(),
-  pcb_component_ids: z109.array(z109.string()),
-  name: z109.string().optional(),
-  description: z109.string().optional(),
-  layout_mode: z109.string().optional(),
-  autorouter_configuration: z109.object({
+  anchor_alignment: z112.enum(["center", "top_left", "top_right", "bottom_left", "bottom_right"]).optional(),
+  pcb_component_ids: z112.array(z112.string()),
+  child_layout_mode: z112.enum(["packed", "none"]).optional(),
+  name: z112.string().optional(),
+  description: z112.string().optional(),
+  layout_mode: z112.string().optional(),
+  autorouter_configuration: z112.object({
     trace_clearance: length
   }).optional(),
-  autorouter_used_string: z109.string().optional()
+  autorouter_used_string: z112.string().optional()
 }).describe("Defines a group of components on the PCB");
 expectTypesMatch(true);
-var pcb_autorouting_error = z110.object({
-  type: z110.literal("pcb_autorouting_error"),
+var pcb_autorouting_error = z113.object({
+  type: z113.literal("pcb_autorouting_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_autorouting_error"),
-  error_type: z110.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
-  message: z110.string(),
-  subcircuit_id: z110.string().optional()
+  error_type: z113.literal("pcb_autorouting_error").default("pcb_autorouting_error"),
+  message: z113.string(),
+  subcircuit_id: z113.string().optional()
 }).describe("The autorouting has failed to route a portion of the board");
 expectTypesMatch(true);
-var pcb_manual_edit_conflict_warning = z111.object({
-  type: z111.literal("pcb_manual_edit_conflict_warning"),
+var pcb_manual_edit_conflict_warning = z114.object({
+  type: z114.literal("pcb_manual_edit_conflict_warning"),
   pcb_manual_edit_conflict_warning_id: getZodPrefixedIdWithDefault(
     "pcb_manual_edit_conflict_warning"
   ),
-  warning_type: z111.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
-  message: z111.string(),
-  pcb_component_id: z111.string(),
-  pcb_group_id: z111.string().optional(),
-  subcircuit_id: z111.string().optional(),
-  source_component_id: z111.string()
+  warning_type: z114.literal("pcb_manual_edit_conflict_warning").default("pcb_manual_edit_conflict_warning"),
+  message: z114.string(),
+  pcb_component_id: z114.string(),
+  pcb_group_id: z114.string().optional(),
+  subcircuit_id: z114.string().optional(),
+  source_component_id: z114.string()
 }).describe(
   "Warning emitted when a component has both manual placement and explicit pcbX/pcbY coordinates"
 );
 expectTypesMatch(true);
-var pcb_breakout_point = z112.object({
-  type: z112.literal("pcb_breakout_point"),
+var pcb_breakout_point = z115.object({
+  type: z115.literal("pcb_breakout_point"),
   pcb_breakout_point_id: getZodPrefixedIdWithDefault("pcb_breakout_point"),
-  pcb_group_id: z112.string(),
-  subcircuit_id: z112.string().optional(),
-  source_trace_id: z112.string().optional(),
-  source_port_id: z112.string().optional(),
-  source_net_id: z112.string().optional(),
+  pcb_group_id: z115.string(),
+  subcircuit_id: z115.string().optional(),
+  source_trace_id: z115.string().optional(),
+  source_port_id: z115.string().optional(),
+  source_net_id: z115.string().optional(),
   x: distance,
   y: distance
 }).describe(
   "Defines a routing target within a pcb_group for a source_trace or source_net"
 );
 expectTypesMatch(true);
-var pcb_ground_plane = z113.object({
-  type: z113.literal("pcb_ground_plane"),
+var pcb_ground_plane = z116.object({
+  type: z116.literal("pcb_ground_plane"),
   pcb_ground_plane_id: getZodPrefixedIdWithDefault("pcb_ground_plane"),
-  source_pcb_ground_plane_id: z113.string(),
-  source_net_id: z113.string(),
-  pcb_group_id: z113.string().optional(),
-  subcircuit_id: z113.string().optional()
+  source_pcb_ground_plane_id: z116.string(),
+  source_net_id: z116.string(),
+  pcb_group_id: z116.string().optional(),
+  subcircuit_id: z116.string().optional()
 }).describe("Defines a ground plane on the PCB");
 expectTypesMatch(true);
-var pcb_ground_plane_region = z114.object({
-  type: z114.literal("pcb_ground_plane_region"),
+var pcb_ground_plane_region = z117.object({
+  type: z117.literal("pcb_ground_plane_region"),
   pcb_ground_plane_region_id: getZodPrefixedIdWithDefault(
     "pcb_ground_plane_region"
   ),
-  pcb_ground_plane_id: z114.string(),
-  pcb_group_id: z114.string().optional(),
-  subcircuit_id: z114.string().optional(),
+  pcb_ground_plane_id: z117.string(),
+  pcb_group_id: z117.string().optional(),
+  subcircuit_id: z117.string().optional(),
   layer: layer_ref,
-  points: z114.array(point)
+  points: z117.array(point)
 }).describe("Defines a polygon region of a ground plane");
 expectTypesMatch(true);
-var pcb_thermal_spoke = z115.object({
-  type: z115.literal("pcb_thermal_spoke"),
+var pcb_thermal_spoke = z118.object({
+  type: z118.literal("pcb_thermal_spoke"),
   pcb_thermal_spoke_id: getZodPrefixedIdWithDefault("pcb_thermal_spoke"),
-  pcb_ground_plane_id: z115.string(),
-  shape: z115.string(),
-  spoke_count: z115.number(),
+  pcb_ground_plane_id: z118.string(),
+  shape: z118.string(),
+  spoke_count: z118.number(),
   spoke_thickness: distance,
   spoke_inner_diameter: distance,
   spoke_outer_diameter: distance,
-  pcb_plated_hole_id: z115.string().optional(),
-  subcircuit_id: z115.string().optional()
+  pcb_plated_hole_id: z118.string().optional(),
+  subcircuit_id: z118.string().optional()
 }).describe("Pattern for connecting a ground plane to a plated hole");
 expectTypesMatch(true);
-var pcb_copper_pour_base = z116.object({
-  type: z116.literal("pcb_copper_pour"),
+var pcb_copper_pour_base = z119.object({
+  type: z119.literal("pcb_copper_pour"),
   pcb_copper_pour_id: getZodPrefixedIdWithDefault("pcb_copper_pour"),
-  pcb_group_id: z116.string().optional(),
-  subcircuit_id: z116.string().optional(),
+  pcb_group_id: z119.string().optional(),
+  subcircuit_id: z119.string().optional(),
   layer: layer_ref,
-  source_net_id: z116.string().optional()
+  source_net_id: z119.string().optional(),
+  covered_with_solder_mask: z119.boolean().optional().default(true)
 });
 var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
-  shape: z116.literal("rect"),
+  shape: z119.literal("rect"),
   center: point,
   width: length,
   height: length,
@@ -3230,140 +3379,141 @@ var pcb_copper_pour_rect = pcb_copper_pour_base.extend({
 });
 expectTypesMatch(true);
 var pcb_copper_pour_brep = pcb_copper_pour_base.extend({
-  shape: z116.literal("brep"),
+  shape: z119.literal("brep"),
   brep_shape
 });
 expectTypesMatch(true);
 var pcb_copper_pour_polygon = pcb_copper_pour_base.extend({
-  shape: z116.literal("polygon"),
-  points: z116.array(point)
+  shape: z119.literal("polygon"),
+  points: z119.array(point)
 });
 expectTypesMatch(true);
-var pcb_copper_pour = z116.discriminatedUnion("shape", [
+var pcb_copper_pour = z119.discriminatedUnion("shape", [
   pcb_copper_pour_rect,
   pcb_copper_pour_brep,
   pcb_copper_pour_polygon
 ]).describe("Defines a copper pour on the PCB.");
 expectTypesMatch(true);
-var pcb_component_outside_board_error = z117.object({
-  type: z117.literal("pcb_component_outside_board_error"),
+var pcb_component_outside_board_error = z120.object({
+  type: z120.literal("pcb_component_outside_board_error"),
   pcb_component_outside_board_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_outside_board_error"
   ),
-  error_type: z117.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
-  message: z117.string(),
-  pcb_component_id: z117.string(),
-  pcb_board_id: z117.string(),
+  error_type: z120.literal("pcb_component_outside_board_error").default("pcb_component_outside_board_error"),
+  message: z120.string(),
+  pcb_component_id: z120.string(),
+  pcb_board_id: z120.string(),
   component_center: point,
-  component_bounds: z117.object({
-    min_x: z117.number(),
-    max_x: z117.number(),
-    min_y: z117.number(),
-    max_y: z117.number()
+  component_bounds: z120.object({
+    min_x: z120.number(),
+    max_x: z120.number(),
+    min_y: z120.number(),
+    max_y: z120.number()
   }),
-  subcircuit_id: z117.string().optional(),
-  source_component_id: z117.string().optional()
+  subcircuit_id: z120.string().optional(),
+  source_component_id: z120.string().optional()
 }).describe(
   "Error emitted when a PCB component is placed outside the board boundaries"
 );
 expectTypesMatch(true);
-var pcb_component_invalid_layer_error = z118.object({
-  type: z118.literal("pcb_component_invalid_layer_error"),
+var pcb_component_invalid_layer_error = z121.object({
+  type: z121.literal("pcb_component_invalid_layer_error"),
   pcb_component_invalid_layer_error_id: getZodPrefixedIdWithDefault(
     "pcb_component_invalid_layer_error"
   ),
-  error_type: z118.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
-  message: z118.string(),
-  pcb_component_id: z118.string().optional(),
-  source_component_id: z118.string(),
+  error_type: z121.literal("pcb_component_invalid_layer_error").default("pcb_component_invalid_layer_error"),
+  message: z121.string(),
+  pcb_component_id: z121.string().optional(),
+  source_component_id: z121.string(),
   layer: layer_ref,
-  subcircuit_id: z118.string().optional()
+  subcircuit_id: z121.string().optional()
 }).describe(
   "Error emitted when a component is placed on an invalid layer (components can only be on 'top' or 'bottom' layers)"
 );
 expectTypesMatch(true);
-var pcb_via_clearance_error = z119.object({
-  type: z119.literal("pcb_via_clearance_error"),
+var pcb_via_clearance_error = z122.object({
+  type: z122.literal("pcb_via_clearance_error"),
   pcb_error_id: getZodPrefixedIdWithDefault("pcb_error"),
-  error_type: z119.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
-  message: z119.string(),
-  pcb_via_ids: z119.array(z119.string()).min(2),
+  error_type: z122.literal("pcb_via_clearance_error").default("pcb_via_clearance_error"),
+  message: z122.string(),
+  pcb_via_ids: z122.array(z122.string()).min(2),
   minimum_clearance: distance.optional(),
   actual_clearance: distance.optional(),
-  pcb_center: z119.object({
-    x: z119.number().optional(),
-    y: z119.number().optional()
+  pcb_center: z122.object({
+    x: z122.number().optional(),
+    y: z122.number().optional()
   }).optional(),
-  subcircuit_id: z119.string().optional()
+  subcircuit_id: z122.string().optional()
 }).describe("Error emitted when vias are closer than the allowed clearance");
 expectTypesMatch(true);
-var pcb_courtyard_rect = z120.object({
-  type: z120.literal("pcb_courtyard_rect"),
+var pcb_courtyard_rect = z123.object({
+  type: z123.literal("pcb_courtyard_rect"),
   pcb_courtyard_rect_id: getZodPrefixedIdWithDefault("pcb_courtyard_rect"),
-  pcb_component_id: z120.string(),
-  pcb_group_id: z120.string().optional(),
-  subcircuit_id: z120.string().optional(),
+  pcb_component_id: z123.string(),
+  pcb_group_id: z123.string().optional(),
+  subcircuit_id: z123.string().optional(),
   center: point,
   width: length,
   height: length,
   layer: visible_layer,
-  color: z120.string().optional()
+  color: z123.string().optional()
 }).describe("Defines a courtyard rectangle on the PCB");
 expectTypesMatch(true);
-var pcb_courtyard_outline = z121.object({
-  type: z121.literal("pcb_courtyard_outline"),
+var pcb_courtyard_outline = z124.object({
+  type: z124.literal("pcb_courtyard_outline"),
   pcb_courtyard_outline_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_outline"
   ),
-  pcb_component_id: z121.string(),
-  pcb_group_id: z121.string().optional(),
-  subcircuit_id: z121.string().optional(),
+  pcb_component_id: z124.string(),
+  pcb_group_id: z124.string().optional(),
+  subcircuit_id: z124.string().optional(),
   layer: visible_layer,
-  outline: z121.array(point).min(2),
+  outline: z124.array(point).min(2),
   stroke_width: length.default("0.1mm"),
-  is_closed: z121.boolean().optional(),
-  is_stroke_dashed: z121.boolean().optional(),
-  color: z121.string().optional()
+  is_closed: z124.boolean().optional(),
+  is_stroke_dashed: z124.boolean().optional(),
+  color: z124.string().optional()
 }).describe("Defines a courtyard outline on the PCB");
 expectTypesMatch(true);
-var pcb_courtyard_polygon = z122.object({
-  type: z122.literal("pcb_courtyard_polygon"),
+var pcb_courtyard_polygon = z125.object({
+  type: z125.literal("pcb_courtyard_polygon"),
   pcb_courtyard_polygon_id: getZodPrefixedIdWithDefault(
     "pcb_courtyard_polygon"
   ),
-  pcb_component_id: z122.string(),
-  pcb_group_id: z122.string().optional(),
-  subcircuit_id: z122.string().optional(),
+  pcb_component_id: z125.string(),
+  pcb_group_id: z125.string().optional(),
+  subcircuit_id: z125.string().optional(),
   layer: visible_layer,
-  points: z122.array(point).min(3),
-  color: z122.string().optional()
+  points: z125.array(point).min(3),
+  color: z125.string().optional()
 }).describe("Defines a courtyard polygon on the PCB");
 expectTypesMatch(true);
-var cad_component = z123.object({
-  type: z123.literal("cad_component"),
-  cad_component_id: z123.string(),
-  pcb_component_id: z123.string(),
-  source_component_id: z123.string(),
+var cad_component = z126.object({
+  type: z126.literal("cad_component"),
+  cad_component_id: z126.string(),
+  pcb_component_id: z126.string(),
+  source_component_id: z126.string(),
   position: point3,
   rotation: point3.optional(),
   size: point3.optional(),
   layer: layer_ref.optional(),
-  subcircuit_id: z123.string().optional(),
+  subcircuit_id: z126.string().optional(),
   // These are all ways to generate/load the 3d model
-  footprinter_string: z123.string().optional(),
-  model_obj_url: z123.string().optional(),
-  model_stl_url: z123.string().optional(),
-  model_3mf_url: z123.string().optional(),
-  model_gltf_url: z123.string().optional(),
-  model_glb_url: z123.string().optional(),
-  model_step_url: z123.string().optional(),
-  model_wrl_url: z123.string().optional(),
-  model_unit_to_mm_scale_factor: z123.number().optional(),
-  model_jscad: z123.any().optional()
+  footprinter_string: z126.string().optional(),
+  model_obj_url: z126.string().optional(),
+  model_stl_url: z126.string().optional(),
+  model_3mf_url: z126.string().optional(),
+  model_gltf_url: z126.string().optional(),
+  model_glb_url: z126.string().optional(),
+  model_step_url: z126.string().optional(),
+  model_wrl_url: z126.string().optional(),
+  model_unit_to_mm_scale_factor: z126.number().optional(),
+  model_jscad: z126.any().optional(),
+  show_as_translucent_model: z126.boolean().optional()
 }).describe("Defines a component on the PCB");
 expectTypesMatch(true);
-var wave_shape = z124.enum(["sinewave", "square", "triangle", "sawtooth"]);
-var percentage = z124.union([z124.string(), z124.number()]).transform((val) => {
+var wave_shape = z127.enum(["sinewave", "square", "triangle", "sawtooth"]);
+var percentage = z127.union([z127.string(), z127.number()]).transform((val) => {
   if (typeof val === "string") {
     if (val.endsWith("%")) {
       return parseFloat(val.slice(0, -1)) / 100;
@@ -3372,30 +3522,30 @@ var percentage = z124.union([z124.string(), z124.number()]).transform((val) => {
   }
   return val;
 }).pipe(
-  z124.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
+  z127.number().min(0, "Duty cycle must be non-negative").max(1, "Duty cycle cannot be greater than 100%")
 );
-var simulation_dc_voltage_source = z124.object({
-  type: z124.literal("simulation_voltage_source"),
+var simulation_dc_voltage_source = z127.object({
+  type: z127.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z124.literal(true).optional().default(true),
-  positive_source_port_id: z124.string().optional(),
-  negative_source_port_id: z124.string().optional(),
-  positive_source_net_id: z124.string().optional(),
-  negative_source_net_id: z124.string().optional(),
+  is_dc_source: z127.literal(true).optional().default(true),
+  positive_source_port_id: z127.string().optional(),
+  negative_source_port_id: z127.string().optional(),
+  positive_source_net_id: z127.string().optional(),
+  negative_source_net_id: z127.string().optional(),
   voltage
 }).describe("Defines a DC voltage source for simulation");
-var simulation_ac_voltage_source = z124.object({
-  type: z124.literal("simulation_voltage_source"),
+var simulation_ac_voltage_source = z127.object({
+  type: z127.literal("simulation_voltage_source"),
   simulation_voltage_source_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_source"
   ),
-  is_dc_source: z124.literal(false),
-  terminal1_source_port_id: z124.string().optional(),
-  terminal2_source_port_id: z124.string().optional(),
-  terminal1_source_net_id: z124.string().optional(),
-  terminal2_source_net_id: z124.string().optional(),
+  is_dc_source: z127.literal(false),
+  terminal1_source_port_id: z127.string().optional(),
+  terminal2_source_port_id: z127.string().optional(),
+  terminal1_source_net_id: z127.string().optional(),
+  terminal2_source_net_id: z127.string().optional(),
   voltage: voltage.optional(),
   frequency: frequency.optional(),
   peak_to_peak_voltage: voltage.optional(),
@@ -3403,74 +3553,117 @@ var simulation_ac_voltage_source = z124.object({
   phase: rotation.optional(),
   duty_cycle: percentage.optional()
 }).describe("Defines an AC voltage source for simulation");
-var simulation_voltage_source = z124.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
+var simulation_voltage_source = z127.union([simulation_dc_voltage_source, simulation_ac_voltage_source]).describe("Defines a voltage source for simulation");
 expectTypesMatch(true);
 expectTypesMatch(true);
 expectTypesMatch(true);
-var experiment_type = z125.union([
-  z125.literal("spice_dc_sweep"),
-  z125.literal("spice_dc_operating_point"),
-  z125.literal("spice_transient_analysis"),
-  z125.literal("spice_ac_analysis")
+var experiment_type = z128.union([
+  z128.literal("spice_dc_sweep"),
+  z128.literal("spice_dc_operating_point"),
+  z128.literal("spice_transient_analysis"),
+  z128.literal("spice_ac_analysis")
 ]);
-var simulation_experiment = z125.object({
-  type: z125.literal("simulation_experiment"),
+var simulation_experiment = z128.object({
+  type: z128.literal("simulation_experiment"),
   simulation_experiment_id: getZodPrefixedIdWithDefault(
     "simulation_experiment"
   ),
-  name: z125.string(),
+  name: z128.string(),
   experiment_type,
   time_per_step: duration_ms.optional(),
   start_time_ms: ms.optional(),
   end_time_ms: ms.optional()
 }).describe("Defines a simulation experiment configuration");
 expectTypesMatch(true);
-var simulation_transient_voltage_graph = z126.object({
-  type: z126.literal("simulation_transient_voltage_graph"),
+var simulation_transient_voltage_graph = z129.object({
+  type: z129.literal("simulation_transient_voltage_graph"),
   simulation_transient_voltage_graph_id: getZodPrefixedIdWithDefault(
     "simulation_transient_voltage_graph"
   ),
-  simulation_experiment_id: z126.string(),
-  timestamps_ms: z126.array(z126.number()).optional(),
-  voltage_levels: z126.array(z126.number()),
-  schematic_voltage_probe_id: z126.string().optional(),
-  simulation_voltage_probe_id: z126.string().optional(),
-  subcircuit_connectivity_map_key: z126.string().optional(),
+  simulation_experiment_id: z129.string(),
+  timestamps_ms: z129.array(z129.number()).optional(),
+  voltage_levels: z129.array(z129.number()),
+  source_component_id: z129.string().optional(),
+  subcircuit_connectivity_map_key: z129.string().optional(),
   time_per_step: duration_ms,
   start_time_ms: ms,
   end_time_ms: ms,
-  name: z126.string().optional()
+  name: z129.string().optional(),
+  color: z129.string().optional()
 }).describe("Stores voltage measurements over time for a simulation");
 expectTypesMatch(true);
-var simulation_switch = z127.object({
-  type: z127.literal("simulation_switch"),
+var simulation_switch = z130.object({
+  type: z130.literal("simulation_switch"),
   simulation_switch_id: getZodPrefixedIdWithDefault("simulation_switch"),
-  source_component_id: z127.string().optional(),
+  source_component_id: z130.string().optional(),
   closes_at: ms.optional(),
   opens_at: ms.optional(),
-  starts_closed: z127.boolean().optional(),
+  starts_closed: z130.boolean().optional(),
   switching_frequency: frequency.optional()
 }).describe("Defines a switch for simulation timing control");
 expectTypesMatch(true);
-var simulation_voltage_probe = z128.object({
-  type: z128.literal("simulation_voltage_probe"),
+var simulation_voltage_probe = z131.object({
+  type: z131.literal("simulation_voltage_probe"),
   simulation_voltage_probe_id: getZodPrefixedIdWithDefault(
     "simulation_voltage_probe"
   ),
-  source_port_id: z128.string().optional(),
-  source_net_id: z128.string().optional(),
-  name: z128.string().optional(),
-  subcircuit_id: z128.string().optional()
+  source_component_id: z131.string().optional(),
+  name: z131.string().optional(),
+  signal_input_source_port_id: z131.string().optional(),
+  signal_input_source_net_id: z131.string().optional(),
+  reference_input_source_port_id: z131.string().optional(),
+  reference_input_source_net_id: z131.string().optional(),
+  subcircuit_id: z131.string().optional(),
+  color: z131.string().optional()
 }).describe(
-  "Defines a voltage probe for simulation, connected to a port or a net"
-).refine(
-  (data) => Boolean(data.source_port_id) !== Boolean(data.source_net_id),
-  {
-    message: "Exactly one of source_port_id or source_net_id must be provided to simulation_voltage_probe"
+  "Defines a voltage probe for simulation. If a reference input is not provided, it measures against ground. If a reference input is provided, it measures the differential voltage between two points."
+).superRefine((data, ctx) => {
+  const is_differential = data.reference_input_source_port_id || data.reference_input_source_net_id;
+  if (is_differential) {
+    const has_ports = !!data.signal_input_source_port_id || !!data.reference_input_source_port_id;
+    const has_nets = !!data.signal_input_source_net_id || !!data.reference_input_source_net_id;
+    if (has_ports && has_nets) {
+      ctx.addIssue({
+        code: z131.ZodIssueCode.custom,
+        message: "Cannot mix port and net connections in a differential probe."
+      });
+    } else if (has_ports) {
+      if (!data.signal_input_source_port_id || !data.reference_input_source_port_id) {
+        ctx.addIssue({
+          code: z131.ZodIssueCode.custom,
+          message: "Differential port probe requires both signal_input_source_port_id and reference_input_source_port_id."
+        });
+      }
+    } else if (has_nets) {
+      if (!data.signal_input_source_net_id || !data.reference_input_source_net_id) {
+        ctx.addIssue({
+          code: z131.ZodIssueCode.custom,
+          message: "Differential net probe requires both signal_input_source_net_id and reference_input_source_net_id."
+        });
+      }
+    }
+  } else {
+    if (!!data.signal_input_source_port_id === !!data.signal_input_source_net_id) {
+      ctx.addIssue({
+        code: z131.ZodIssueCode.custom,
+        message: "A voltage probe must have exactly one of signal_input_source_port_id or signal_input_source_net_id."
+      });
+    }
   }
-);
+});
+expectTypesMatch(true);
+var simulation_unknown_experiment_error = z132.object({
+  type: z132.literal("simulation_unknown_experiment_error"),
+  simulation_unknown_experiment_error_id: getZodPrefixedIdWithDefault(
+    "simulation_unknown_experiment_error"
+  ),
+  error_type: z132.literal("simulation_unknown_experiment_error").default("simulation_unknown_experiment_error"),
+  message: z132.string(),
+  simulation_experiment_id: z132.string().optional(),
+  subcircuit_id: z132.string().optional()
+}).describe("An unknown error occurred during the simulation experiment.");
 expectTypesMatch(true);
-var any_circuit_element = z129.union([
+var any_circuit_element = z133.union([
   source_trace,
   source_port,
   any_source_component,
@@ -3499,6 +3692,7 @@ var any_circuit_element = z129.union([
   source_project_metadata,
   source_trace_not_connected_error,
   source_pin_missing_trace_warning,
+  source_pin_must_be_connected_error,
   unknown_error_finding_part,
   pcb_component,
   pcb_hole,
@@ -3579,7 +3773,8 @@ var any_circuit_element = z129.union([
   simulation_experiment,
   simulation_transient_voltage_graph,
   simulation_switch,
-  simulation_voltage_probe
+  simulation_voltage_probe,
+  simulation_unknown_experiment_error
 ]);
 var any_soup_element = any_circuit_element;
 expectTypesMatch(true);
@@ -5811,10 +6006,10 @@ var re = e({ primitives: [...Object.values(sh), ...Object.values(mh), { type: "t
 var Zp = E(re);
 var { paths: nh, texts: zg, bounds: Qp, refblocks: Kp, circles: fh } = gt;
 var ta = e({ primitives: [...Object.values(nh), ...Object.values(fh), { type: "text", text: "{REF}", x: 0, y: 0.2594553499999995 }], ports: [{ ...Kp.left1, labels: ["1"] }, { ...Kp.right1, labels: ["2"] }], center: { x: Qp.centerX, y: Qp.centerY } }).rotateRightFacingSymbol("up").labelPort("left1", ["1"]).labelPort("right1", ["2"]).changeTextAnchor("{REF}", "middle_right").build();
-var z130 = { paths: { path27: { type: "path", points: [{ x: 0.55, y: 0.02 }, { x: 0.07, y: 0.02 }], color: "primary", fill: false }, path28: { type: "path", points: [{ x: -0.09, y: 0.02 }, { x: -0.55, y: 0.02 }], color: "primary", fill: false }, path29: { type: "path", points: [{ x: 0.07, y: 0.28 }, { x: 0.07, y: -0.25 }], color: "primary", fill: false }, path30: { type: "path", points: [{ x: -0.09, y: 0.28 }, { x: -0.09, y: -0.25 }], color: "primary", fill: false } }, texts: { top1: { type: "text", text: "{REF}", x: -0.01, y: 0.42 }, bottom1: { type: "text", text: "{VAL}", x: 0, y: -0.42 } }, refblocks: { left1: { x: -0.55, y: 0.02 }, right1: { x: 0.55, y: 0.02 } }, bounds: { minX: -0.58, maxX: 0.58, minY: -0.42, maxY: 0.42, width: 1.16, height: 0.84, centerX: 0, centerY: 0 }, circles: {} };
-var { paths: ch, texts: Cg, bounds: oe, refblocks: ea, circles: dh } = z130;
+var z134 = { paths: { path27: { type: "path", points: [{ x: 0.55, y: 0.02 }, { x: 0.07, y: 0.02 }], color: "primary", fill: false }, path28: { type: "path", points: [{ x: -0.09, y: 0.02 }, { x: -0.55, y: 0.02 }], color: "primary", fill: false }, path29: { type: "path", points: [{ x: 0.07, y: 0.28 }, { x: 0.07, y: -0.25 }], color: "primary", fill: false }, path30: { type: "path", points: [{ x: -0.09, y: 0.28 }, { x: -0.09, y: -0.25 }], color: "primary", fill: false } }, texts: { top1: { type: "text", text: "{REF}", x: -0.01, y: 0.42 }, bottom1: { type: "text", text: "{VAL}", x: 0, y: -0.42 } }, refblocks: { left1: { x: -0.55, y: 0.02 }, right1: { x: 0.55, y: 0.02 } }, bounds: { minX: -0.58, maxX: 0.58, minY: -0.42, maxY: 0.42, width: 1.16, height: 0.84, centerX: 0, centerY: 0 }, circles: {} };
+var { paths: ch, texts: Cg, bounds: oe, refblocks: ea, circles: dh } = z134;
 var ra = e({ primitives: [...Object.values(ch), ...Object.values(dh), { type: "text", text: "{REF}", x: -0.2, y: 0.115 }, { type: "text", text: "{VAL}", x: 0.2, y: 0.115 }], ports: [{ ...ea.left1, labels: ["1"] }, { ...ea.right1, labels: ["2"] }], size: { width: oe.width, height: oe.height }, center: { x: oe.centerX, y: oe.centerY } }).changeTextAnchor("{VAL}", "top_left").rotateRightFacingSymbol("down").labelPort("left1", ["1", "pos"]).labelPort("right1", ["2", "neg"]).changeTextAnchor("{REF}", "bottom_left").build();
-var oa = e(z130).changeTextAnchor("{VAL}", "middle_top").rotateRightFacingSymbol("right").labelPort("left1", ["2", "neg"]).labelPort("right1", ["1", "pos"]).changeTextAnchor("{REF}", "middle_bottom").build();
+var oa = e(z134).changeTextAnchor("{VAL}", "middle_top").rotateRightFacingSymbol("right").labelPort("left1", ["2", "neg"]).labelPort("right1", ["1", "pos"]).changeTextAnchor("{REF}", "middle_bottom").build();
 var O = { paths: { "path27-5": { type: "path", points: [{ x: 0.45, y: 0.02 }, { x: 0, y: 0.02 }], color: "primary", fill: false }, "path28-5": { type: "path", points: [{ x: -0.09, y: 0.02 }, { x: -0.54, y: 0.02 }], color: "primary", fill: false }, "path30-7": { type: "path", points: [{ x: 0, y: 0.28 }, { x: 0, y: -0.25 }], color: "primary", fill: false }, path8704: { type: "path", points: [{ x: -0.14, y: -0.24 }, { x: -0.14, y: -0.24 }, { x: -0.14, y: -0.24 }, { x: -0.14, y: -0.24 }, { x: -0.14, y: -0.24 }, { x: -0.14, y: -0.24 }, { x: -0.14, y: -0.24 }, { x: -0.14, y: -0.24 }, { x: -0.14, y: -0.24 }, { x: -0.14, y: -0.23 }, { x: -0.14, y: -0.23 }, { x: -0.14, y: -0.23 }, { x: -0.14, y: -0.23 }, { x: -0.13, y: -0.23 }, { x: -0.13, y: -0.23 }, { x: -0.13, y: -0.23 }, { x: -0.13, y: -0.23 }, { x: -0.13, y: -0.22 }, { x: -0.13, y: -0.22 }, { x: -0.13, y: -0.22 }, { x: -0.13, y: -0.22 }, { x: -0.13, y: -0.22 }, { x: -0.13, y: -0.22 }, { x: -0.13, y: -0.22 }, { x: -0.13, y: -0.22 }, { x: -0.13, y: -0.21 }, { x: -0.13, y: -0.21 }, { x: -0.13, y: -0.21 }, { x: -0.12, y: -0.21 }, { x: -0.12, y: -0.21 }, { x: -0.12, y: -0.21 }, { x: -0.12, y: -0.21 }, { x: -0.12, y: -0.21 }, { x: -0.12, y: -0.2 }, { x: -0.12, y: -0.2 }, { x: -0.12, y: -0.2 }, { x: -0.12, y: -0.2 }, { x: -0.12, y: -0.2 }, { x: -0.12, y: -0.2 }, { x: -0.12, y: -0.2 }, { x: -0.12, y: -0.2 }, { x: -0.12, y: -0.19 }, { x: -0.12, y: -0.19 }, { x: -0.12, y: -0.19 }, { x: -0.12, y: -0.19 }, { x: -0.11, y: -0.19 }, { x: -0.11, y: -0.19 }, { x: -0.11, y: -0.19 }, { x: -0.11, y: -0.18 }, { x: -0.11, y: -0.18 }, { x: -0.11, y: -0.18 }, { x: -0.11, y: -0.18 }, { x: -0.11, y: -0.18 }, { x: -0.11, y: -0.18 }, { x: -0.11, y: -0.18 }, { x: -0.11, y: -0.18 }, { x: -0.11, y: -0.17 }, { x: -0.11, y: -0.17 }, { x: -0.11, y: -0.17 }, { x: -0.11, y: -0.17 }, { x: -0.11, y: -0.17 }, { x: -0.11, y: -0.17 }, { x: -0.11, y: -0.17 }, { x: -0.11, y: -0.17 }, { x: -0.1, y: -0.16 }, { x: -0.1, y: -0.16 }, { x: -0.1, y: -0.16 }, { x: -0.1, y: -0.16 }, { x: -0.1, y: -0.16 }, { x: -0.1, y: -0.16 }, { x: -0.1, y: -0.16 }, { x: -0.1, y: -0.16 }, { x: -0.1, y: -0.15 }, { x: -0.1, y: -0.15 }, { x: -0.1, y: -0.15 }, { x: -0.1, y: -0.15 }, { x: -0.1, y: -0.15 }, { x: -0.1, y: -0.15 }, { x: -0.1, y: -0.15 }, { x: -0.1, y: -0.14 }, { x: -0.1, y: -0.14 }, { x: -0.1, y: -0.14 }, { x: -0.1, y: -0.14 }, { x: -0.1, y: -0.14 }, { x: -0.1, y: -0.14 }, { x: -0.1, y: -0.14 }, { x: -0.09, y: -0.14 }, { x: -0.09, y: -0.13 }, { x: -0.09, y: -0.13 }, { x: -0.09, y: -0.13 }, { x: -0.09, y: -0.13 }, { x: -0.09, y: -0.13 }, { x: -0.09, y: -0.13 }, { x: -0.09, y: -0.13 }, { x: -0.09, y: -0.13 }, { x: -0.09, y: -0.12 }, { x: -0.09, y: -0.12 }, { x: -0.09, y: -0.12 }, { x: -0.09, y: -0.12 }, { x: -0.09, y: -0.12 }, { x: -0.09, y: -0.12 }, { x: -0.09, y: -0.12 }, { x: -0.09, y: -0.12 }, { x: -0.09, y: -0.11 }, { x: -0.09, y: -0.11 }, { x: -0.09, y: -0.11 }, { x: -0.09, y: -0.11 }, { x: -0.09, y: -0.11 }, { x: -0.09, y: -0.11 }, { x: -0.09, y: -0.1 }, { x: -0.09, y: -0.1 }, { x: -0.09, y: -0.1 }, { x: -0.09, y: -0.1 }, { x: -0.09, y: -0.1 }, { x: -0.09, y: -0.1 }, { x: -0.08, y: -0.09 }, { x: -0.08, y: -0.09 }, { x: -0.08, y: -0.09 }, { x: -0.08, y: -0.09 }, { x: -0.08, y: -0.09 }, { x: -0.08, y: -0.09 }, { x: -0.08, y: -0.08 }, { x: -0.08, y: -0.08 }, { x: -0.08, y: -0.08 }, { x: -0.08, y: -0.08 }, { x: -0.08, y: -0.08 }, { x: -0.08, y: -0.08 }, { x: -0.08, y: -0.07 }, { x: -0.08, y: -0.07 }, { x: -0.08, y: -0.07 }, { x: -0.08, y: -0.07 }, { x: -0.08, y: -0.07 }, { x: -0.08, y: -0.07 }, { x: -0.08, y: -0.06 }, { x: -0.08, y: -0.06 }, { x: -0.08, y: -0.06 }, { x: -0.08, y: -0.06 }, { x: -0.08, y: -0.06 }, { x: -0.08, y: -0.05 }, { x: -0.08, y: -0.05 }, { x: -0.08, y: -0.05 }, { x: -0.08, y: -0.05 }, { x: -0.08, y: -0.05 }, { x: -0.08, y: -0.05 }, { x: -0.08, y: -0.04 }, { x: -0.08, y: -0.04 }, { x: -0.08, y: -0.04 }, { x: -0.08, y: -0.04 }, { x: -0.08, y: -0.04 }, { x: -0.08, y: -0.04 }, { x: -0.08, y: -0.03 }, { x: -0.08, y: -0.03 }, { x: -0.08, y: -0.03 }, { x: -0.08, y: -0.03 }, { x: -0.08, y: -0.03 }, { x: -0.08, y: -0.03 }, { x: -0.08, y: -0.02 }, { x: -0.08, y: -0.02 }, { x: -0.08, y: -0.02 }, { x: -0.08, y: -0.02 }, { x: -0.08, y: -0.02 }, { x: -0.08, y: -0.02 }, { x: -0.08, y: -0.01 }, { x: -0.08, y: -0.01 }, { x: -0.08, y: -0.01 }, { x: -0.08, y: -0.01 }, { x: -0.08, y: -0.01 }, { x: -0.08, y: 0 }, { x: -0.08, y: 0 }, { x: -0.08, y: 0 }, { x: -0.08, y: 0 }, { x: -0.08, y: 0 }, { x: -0.08, y: 0 }, { x: -0.08, y: 0.01 }, { x: -0.07, y: 0.01 }, { x: -0.07, y: 0.01 }, { x: -0.07, y: 0.01 }, { x: -0.07, y: 0.01 }, { x: -0.07, y: 0.01 }, { x: -0.08, y: 0.02 }, { x: -0.08, y: 0.02 }, { x: -0.08, y: 0.02 }, { x: -0.08, y: 0.02 }, { x: -0.08, y: 0.02 }, { x: -0.08, y: 0.02 }, { x: -0.08, y: 0.03 }, { x: -0.08, y: 0.03 }, { x: -0.08, y: 0.03 }, { x: -0.08, y: 0.03 }, { x: -0.08, y: 0.03 }, { x: -0.08, y: 0.03 }, { x: -0.08, y: 0.04 }, { x: -0.08, y: 0.04 }, { x: -0.08, y: 0.04 }, { x: -0.08, y: 0.04 }, { x: -0.08, y: 0.04 }, { x: -0.08, y: 0.05 }, { x: -0.08, y: 0.05 }, { x: -0.08, y: 0.05 }, { x: -0.08, y: 0.05 }, { x: -0.08, y: 0.05 }, { x: -0.08, y: 0.05 }, { x: -0.08, y: 0.06 }, { x: -0.08, y: 0.06 }, { x: -0.08, y: 0.06 }, { x: -0.08, y: 0.06 }, { x: -0.08, y: 0.06 }, { x: -0.08, y: 0.06 }, { x: -0.08, y: 0.06 }, { x: -0.08, y: 0.06 }, { x: -0.08, y: 0.07 }, { x: -0.08, y: 0.07 }, { x: -0.08, y: 0.07 }, { x: -0.08, y: 0.07 }, { x: -0.08, y: 0.07 }, { x: -0.08, y: 0.07 }, { x: -0.08, y: 0.07 }, { x: -0.08, y: 0.08 }, { x: -0.08, y: 0.08 }, { x: -0.08, y: 0.08 }, { x: -0.08, y: 0.08 }, { x: -0.08, y: 0.08 }, { x: -0.08, y: 0.08 }, { x: -0.08, y: 0.09 }, { x: -0.08, y: 0.09 }, { x: -0.08, y: 0.09 }, { x: -0.08, y: 0.09 }, { x: -0.08, y: 0.09 }, { x: -0.08, y: 0.09 }, { x: -0.08, y: 0.09 }, { x: -0.08, y: 0.1 }, { x: -0.08, y: 0.1 }, { x: -0.08, y: 0.1 }, { x: -0.08, y: 0.1 }, { x: -0.08, y: 0.1 }, { x: -0.08, y: 0.1 }, { x: -0.08, y: 0.1 }, { x: -0.08, y: 0.11 }, { x: -0.08, y: 0.11 }, { x: -0.08, y: 0.11 }, { x: -0.08, y: 0.11 }, { x: -0.08, y: 0.11 }, { x: -0.08, y: 0.11 }, { x: -0.08, y: 0.11 }, { x: -0.08, y: 0.12 }, { x: -0.08, y: 0.12 }, { x: -0.08, y: 0.12 }, { x: -0.08, y: 0.12 }, { x: -0.09, y: 0.12 }, { x: -0.09, y: 0.12 }, { x: -0.09, y: 0.12 }, { x: -0.09, y: 0.13 }, { x: -0.09, y: 0.13 }, { x: -0.09, y: 0.13 }, { x: -0.09, y: 0.13 }, { x: -0.09, y: 0.13 }, { x: -0.09, y: 0.13 }, { x: -0.09, y: 0.14 }, { x: -0.09, y: 0.14 }, { x: -0.09, y: 0.14 }, { x: -0.09, y: 0.14 }, { x: -0.09, y: 0.14 }, { x: -0.09, y: 0.14 }, { x: -0.09, y: 0.14 }, { x: -0.09, y: 0.15 }, { x: -0.09, y: 0.15 }, { x: -0.09, y: 0.15 }, { x: -0.09, y: 0.15 }, { x: -0.09, y: 0.15 }, { x: -0.09, y: 0.15 }, { x: -0.09, y: 0.15 }, { x: -0.09, y: 0.16 }, { x: -0.09, y: 0.16 }, { x: -0.09, y: 0.16 }, { x: -0.09, y: 0.16 }, { x: -0.09, y: 0.16 }, { x: -0.09, y: 0.16 }, { x: -0.09, y: 0.16 }, { x: -0.09, y: 0.17 }, { x: -0.09, y: 0.17 }, { x: -0.1, y: 0.17 }, { x: -0.1, y: 0.17 }, { x: -0.1, y: 0.17 }, { x: -0.1, y: 0.17 }, { x: -0.1, y: 0.17 }, { x: -0.1, y: 0.18 }, { x: -0.1, y: 0.18 }, { x: -0.1, y: 0.18 }, { x: -0.1, y: 0.18 }, { x: -0.1, y: 0.18 }, { x: -0.1, y: 0.18 }, { x: -0.1, y: 0.18 }, { x: -0.1, y: 0.19 }, { x: -0.1, y: 0.19 }, { x: -0.1, y: 0.19 }, { x: -0.1, y: 0.19 }, { x: -0.1, y: 0.19 }, { x: -0.1, y: 0.19 }, { x: -0.1, y: 0.19 }, { x: -0.1, y: 0.2 }, { x: -0.1, y: 0.2 }, { x: -0.1, y: 0.2 }, { x: -0.1, y: 0.2 }, { x: -0.1, y: 0.2 }, { x: -0.1, y: 0.2 }, { x: -0.11, y: 0.2 }, { x: -0.11, y: 0.2 }, { x: -0.11, y: 0.2 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.21 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.22 }, { x: -0.11, y: 0.23 }, { x: -0.11, y: 0.23 }, { x: -0.11, y: 0.23 }, { x: -0.11, y: 0.23 }, { x: -0.12, y: 0.23 }, { x: -0.12, y: 0.23 }, { x: -0.12, y: 0.23 }, { x: -0.12, y: 0.23 }, { x: -0.12, y: 0.23 }, { x: -0.12, y: 0.23 }, { x: -0.12, y: 0.23 }, { x: -0.12, y: 0.23 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.24 }, { x: -0.12, y: 0.25 }, { x: -0.12, y: 0.25 }, { x: -0.12, y: 0.25 }, { x: -0.12, y: 0.25 }, { x: -0.12, y: 0.25 }, { x: -0.12, y: 0.25 }, { x: -0.13, y: 0.25 }, { x: -0.13, y: 0.25 }, { x: -0.13, y: 0.25 }, { x: -0.13, y: 0.25 }, { x: -0.13, y: 0.25 }, { x: -0.13, y: 0.25 }, { x: -0.13, y: 0.25 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.26 }, { x: -0.13, y: 0.27 }, { x: -0.13, y: 0.27 }, { x: -0.13, y: 0.27 }, { x: -0.13, y: 0.27 }, { x: -0.14, y: 0.27 }, { x: -0.14, y: 0.27 }, { x: -0.14, y: 0.27 }, { x: -0.14, y: 0.27 }, { x: -0.14, y: 0.27 }, { x: -0.14, y: 0.27 }, { x: -0.14, y: 0.27 }, { x: -0.14, y: 0.27 }, { x: -0.14, y: 0.27 }, { x: -0.14, y: 0.28 }, { x: -0.14, y: 0.28 }, { x: -0.14, y: 0.28 }, { x: -0.14, y: 0.28 }, { x: -0.14, y: 0.28 }, { x: -0.14, y: 0.28 }, { x: -0.14, y: 0.28 }, { x: -0.14, y: 0.28 }, { x: -0.14, y: 0.28 }], color: "primary", fill: false }, "rect1577-4": { type: "path", points: [{ x: 0.26, y: 0.25 }, { x: 0.12, y: 0.25 }, { x: 0.12, y: 0.25 }, { x: 0.26, y: 0.25 }], color: "primary", fill: true }, "rect1577-4-7": { type: "path", points: [{ x: 0.2, y: 0.32 }, { x: 0.2, y: 0.18 }, { x: 0.19, y: 0.18 }, { x: 0.19, y: 0.32 }], color: "primary", fill: true } }, texts: { top1: { type: "text", text: "{REF}", x: -0.01, y: 0.42 }, bottom1: { type: "text", text: "{VAL}", x: 0, y: -0.42 } }, refblocks: { left1: { x: -0.54, y: 0.02 }, right1: { x: 0.45, y: 0.02 } }, bounds: { minX: -0.58, maxX: 0.58, minY: -0.42, maxY: 0.42, width: 1.16, height: 0.84, centerX: 0, centerY: 0 }, circles: {} };
 var { paths: _h, texts: Wg, bounds: ie, refblocks: ia, circles: gh } = O;
 var la = e({ primitives: [...Object.values(_h), ...Object.values(gh), { type: "text", text: "{REF}", x: 0.1, y: -0.2094553499999995 }, { type: "text", text: "{VAL}", x: -0.2, y: -0.2094553499999995 }], ports: [{ ...ia.left1, labels: ["2", "neg"] }, { ...ia.right1, labels: ["1", "pos"] }], size: { width: ie.width, height: ie.height }, center: { x: ie.centerX, y: ie.centerY } }).changeTextAnchor("{VAL}", "top_left").rotateRightFacingSymbol("up").changeTextAnchor("{REF}", "bottom_left").build();
@@ -5823,8 +6018,8 @@ var { paths: uh, texts: r3, bounds: le, refblocks: aa, circles: vh } = O;
 var ya = e({ primitives: [...Object.values(uh), ...Object.values(vh), { type: "text", text: "{REF}", x: 0, y: -0.4094553499999995 }, { type: "text", text: "{VAL}", x: -0, y: 0.4094553499999995 }], ports: [{ ...aa.left1, labels: ["2", "neg"] }, { ...aa.right1, labels: ["1", "pos"] }], size: { width: le.width, height: le.height }, center: { x: le.centerX, y: le.centerY } }).changeTextAnchor("{VAL}", "middle_bottom").rotateRightFacingSymbol("left").changeTextAnchor("{REF}", "middle_bottom").build();
 var { paths: wh, texts: p3, bounds: pe, refblocks: xa, circles: Ah } = O;
 var sa = e({ primitives: [...Object.values(wh), ...Object.values(Ah), { type: "text", text: "{REF}", x: -0.2, y: 0.2094553499999995 }, { type: "text", text: "{VAL}", x: 0.3, y: 0.2094553499999995 }], ports: [{ ...xa.left1, labels: ["2", "neg"] }, { ...xa.right1, labels: ["1", "pos"] }], size: { width: pe.width, height: pe.height }, center: { x: pe.centerX, y: pe.centerY } }).changeTextAnchor("{VAL}", "top_left").rotateRightFacingSymbol("down").changeTextAnchor("{REF}", "bottom_left").build();
-var ma = e(z130).rotateRightFacingSymbol("right").changeTextAnchor("{VAL}", "middle_top").labelPort("left1", ["1", "pos"]).labelPort("right1", ["2", "neg"]).changeTextAnchor("{REF}", "middle_bottom").build();
-var { paths: Ph, texts: f3, bounds: ae, refblocks: na, circles: Sh } = z130;
+var ma = e(z134).rotateRightFacingSymbol("right").changeTextAnchor("{VAL}", "middle_top").labelPort("left1", ["1", "pos"]).labelPort("right1", ["2", "neg"]).changeTextAnchor("{REF}", "middle_bottom").build();
+var { paths: Ph, texts: f3, bounds: ae, refblocks: na, circles: Sh } = z134;
 var fa = e({ primitives: [...Object.values(Ph), ...Object.values(Sh), { type: "text", text: "{REF}", x: 0.2, y: -0.095 }, { type: "text", text: "{VAL}", x: -0.2, y: -0.095 }], ports: [{ ...na.left1, labels: ["1"] }, { ...na.right1, labels: ["2"] }], size: { width: ae.width, height: ae.height }, center: { x: ae.centerX, y: ae.centerY } }).changeTextAnchor("{VAL}", "top_left").rotateRightFacingSymbol("up").labelPort("left1", ["1", "pos"]).labelPort("right1", ["2", "neg"]).changeTextAnchor("{REF}", "bottom_left").build();
 var A = { paths: { path11: { type: "path", points: [{ x: -0.54, y: 0.03 }, { x: -0.3, y: 0.03 }], color: "primary", fill: false }, path12: { type: "path", points: [{ x: 0.29, y: 0.03 }, { x: 0.54, y: 0.03 }], color: "primary", fill: false }, path2: { type: "path", points: [{ x: 0.29, y: 0.29 }, { x: 0.29, y: -0.23 }], color: "primary", fill: false } }, texts: { top1: { type: "text", text: "{REF}", x: -0.02, y: 0.37 }, bottom1: { type: "text", text: "{VAL}", x: -0.01, y: -0.37 } }, refblocks: { left1: { x: -0.54, y: 0.03 }, right1: { x: 0.54, y: 0.03 } }, bounds: { minX: -0.57, maxX: 0.57, minY: -0.37, maxY: 0.37, width: 1.14, height: 0.74, centerX: 0, centerY: 0 }, circles: { path1: { type: "circle", x: 0, y: 0.04, radius: 0.29, color: "primary", fill: false } } };
 var { paths: Rh, texts: _3, bounds: ye, refblocks: ha, circles: Th } = A;
@@ -7718,4 +7913,4 @@ svgson/dist/svgson.umd.js:
    * @license  MIT
    *)
 */
-//# sourceMappingURL=chunk-6S7LH5YP.js.map
+//# sourceMappingURL=chunk-U5UUPCU3.js.map