dxf-json 0.10.0 → 0.11.0

package/dist/cjs/types/parser/tables/dimStyle/types.d.ts

@@ -0,0 +1,912 @@
+import type { DimensionAngularUnit, DimensionFractionFormat, DimensionTextFill, DimensionTextHorizontal, DimensionTextVertical, DimensionUnit, DimensionZeroSuppression, DimensionZeroSuppressionAngular } from '../../../consts/dimension.ts';
+import type { ArcSymbolType } from '../../entities/arc_dimension/consts.ts';
+import type { CommonDxfTableEntry } from '../types.ts';
+/**
+ * Union of all possible dimension style variable names.
+ *
+ * @see DimStyleVariables
+ * @see https://help.autodesk.com/view/OARX/2025/ENU/?guid=GUID-F2FAD36F-0CE3-4943-9DAD-A9BCD2AE81DA
+ */
+export type DimStyleVariable = 'DIMPOST' | 'DIMAPOST' | 'DIMBLK_OBSOLETE' | 'DIMBLK1_OBSOLETE' | 'DIMBLK2_OBSOLETE' | 'DIMSCALE' | 'DIMASZ' | 'DIMEXO' | 'DIMDLI' | 'DIMEXE' | 'DIMRND' | 'DIMDLE' | 'DIMTP' | 'DIMTM' | 'DIMFXL' | 'DIMJOGANG' | 'DIMTFILL' | 'DIMTFILLCLR' | 'DIMTOL' | 'DIMLIM' | 'DIMTIH' | 'DIMTOH' | 'DIMSE1' | 'DIMSE2' | 'DIMTAD' | 'DIMZIN' | 'DIMAZIN' | 'DIMARCSYM' | 'DIMTXT' | 'DIMCEN' | 'DIMTSZ' | 'DIMALTF' | 'DIMLFAC' | 'DIMTVP' | 'DIMTFAC' | 'DIMGAP' | 'DIMALTRND' | 'DIMALT' | 'DIMALTD' | 'DIMTOFL' | 'DIMSAH' | 'DIMTIX' | 'DIMSOXD' | 'DIMCLRD' | 'DIMCLRE' | 'DIMCLRT' | 'DIMADEC' | 'DIMUNIT' | 'DIMDEC' | 'DIMTDEC' | 'DIMALTU' | 'DIMALTTD' | 'DIMAUNIT' | 'DIMFRAC' | 'DIMLUNIT' | 'DIMDSEP' | 'DIMTMOVE' | 'DIMJUST' | 'DIMSD1' | 'DIMSD2' | 'DIMTOLJ' | 'DIMTZIN' | 'DIMALTZ' | 'DIMALTTZ' | 'DIMFIT' | 'DIMUPT' | 'DIMATFIT' | 'DIMFXLON' | 'DIMTXTDIRECTION' | 'DIMTXSTY' | 'DIMLDRBLK' | 'DIMBLK' | 'DIMBLK1' | 'DIMBLK2' | 'DIMLTYPE' | 'DIMLTEX1' | 'DIMLTEX2' | 'DIMLWD' | 'DIMLWE';
+export interface DimStyleVariableSchema {
+    name: string;
+    code: number;
+    defaultValue?: string | number;
+    defaultValueImperial?: string | number;
+}
+/**
+ * Key-value pairs of dimension style variables. Useful when combined with `DimStyleVariable`.
+ *
+ * @see DimStyleVariable
+ */
+export type DimStyleVariables = {
+    /**
+     * Specifies a text prefix or suffix (or both) to the dimension measurement.
+     *
+     * For example, to establish a suffix for millimeters, set `DIMPOST` to mm;
+     * a distance of 19.2 units would be displayed as `19.2 mm`.
+     *
+     * If tolerances are turned on, the suffix is applied to the tolerances as well as to
+     * the main dimension.
+     *
+     * Use `<>` to indicate placement of the text in relation to the dimension value.
+     * Use the `<>` mechanism for angular dimensions.
+     *
+     * Parsed by group code `3`
+     *
+     * @example
+     * ```
+     * "<>mm" → "5.0mm"
+     * "mm <>" → "mm 5.0"
+     * ```
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-79CCF9B1-BE33-4158-891C-50E4BF795D8E
+     */
+    DIMPOST?: string;
+    /**
+     * Specifies a text prefix or suffix (or both) to the alternate dimension measurement
+     * for all types of dimensions **except angular**.
+     *
+     * For instance, if the current units are `Architectural`, `DIMALT` is on, `DIMALTF` is 25.4
+     * (the number of millimeters per inch), `DIMALTD` is `2`, and `DIMAPOST` is set to `"mm"`,
+     * a distance of 10 units would be displayed as `10"[254.00mm]`.
+     *
+     * Parsed by group code `4`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-AEA9448D-CC01-404B-AFA0-055B9C2F21EE
+     */
+    DIMAPOST?: string;
+    /**
+     * Obsolete. Use `DIMBLK` instead.
+     *
+     * Parsed by group code `5`
+     */
+    DIMBLK_OBSOLETE?: string;
+    /**
+     * Obsolete. Use `DIMBLK1` instead.
+     *
+     * Parsed by group code `6`
+     */
+    DIMBLK1_OBSOLETE?: string;
+    /**
+     * Obsolete. Use `DIMBLK1` instead.
+     *
+     * Parsed by group code `7`
+     */
+    DIMBLK2_OBSOLETE?: string;
+    /**
+     * Sets the overall scale factor applied to dimensioning variables that specify sizes,
+     * distances, or offsets.
+     *
+     * Affects `DIMENSION`, `ARC_DIMENSION`, `LEADER` and `MLEADER`.
+     *
+     * `DIMSCALE` does not affect measured lengths, coordinates, or angles.
+     *
+     * If the current dimension style is annotative, `DIMSCALE` is automatically set to zero
+     * and the dimension scale is controlled by the `CANNOSCALE` system variable.
+     *
+     * `DIMSCALE` cannot be set to a non-zero value when using annotative dimensions.
+     *
+     * - `0`: A reasonable default value is computed based on the scaling between the current
+     *   model space viewport and paper space. If you are in paper space or model space and
+     *   not using the paper space feature, the scale factor is `1.0`.
+     * - otherwise: A scale factor is computed that leads text sizes, arrowhead sizes, and other
+     *   scaled distances to plot at their face values.
+     *
+     * Parsed by group code `40`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-AEA309F0-B831-4432-8085-FB6CD49CDC78
+     */
+    DIMSCALE: number;
+    /**
+     * Controls the size of dimension line and leader line arrowheads. Also controls the size of hook lines.
+     *
+     * Multiples of the arrowhead size determine whether dimension lines and text should fit between
+     * the extension lines. `DIMASZ` is also used to scale arrowhead blocks if set by `DIMBLK`.
+     *
+     * `DIMASZ` has no effect when `DIMTSZ` is other than zero.
+     *
+     * Parsed by group code `41`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-43E31690-BA17-4AD6-82D1-E7809BD1298A
+     */
+    DIMASZ: number;
+    /**
+     * Specifies how far extension lines are offset from origin points.
+     *
+     * With fixed-length extension lines, this value determines the minimum offset.
+     *
+     * Parsed by group code `42`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-5CF50ABD-1F77-4609-BEB5-A129BF7DD746
+     */
+    DIMEXO: number;
+    /**
+     * Controls the spacing of the dimension lines in baseline dimensions.
+     *
+     * Each dimension line is offset from the previous one by this amount, if necessary, to avoid drawing over it.
+     *
+     * Changes made with `DIMDLI` are not applied to existing dimensions.
+     *
+     * Parsed by group code `43`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-D2D1AF3D-004B-4C47-BABE-22B7327EE128
+     */
+    DIMDLI: number;
+    /**
+     * Specifies how far to extend the extension line beyond the dimension line.
+     *
+     * Parsed by group code `44`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-508D4589-3C3E-4B5E-BA2C-539809197A71
+     */
+    DIMEXE: number;
+    /**
+     * Rounds all dimensioning distances to the specified value.
+     *
+     * For instance, if `DIMRND` is set to `0.25`, all distances round to the nearest `0.25` unit.
+     * If you set `DIMRND` to `1.0`, all distances round to the nearest integer.
+     *
+     * Note that the number of digits edited after the decimal point depends on the precision
+     * set by `DIMDEC`.
+     *
+     * `DIMRND` does not apply to angular dimensions.
+     *
+     * Parsed by group code `45`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-215CF615-1AA7-45E5-9D0F-CF9693ABCCB9
+     */
+    DIMRND: number;
+    /**
+     * Sets the distance the dimension line extends beyond the extension line when oblique strokes
+     * are drawn instead of arrowheads.
+     *
+     * Parsed by group code `46`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-C66183C7-D872-41F2-8815-D7479F2A87F6
+     */
+    DIMDLE: number;
+    /**
+     * Sets the maximum (or upper) tolerance limit for dimension text when `DIMTOL` or `DIMLIM` is on.
+     *
+     * `DIMTP` accepts signed values. If `DIMTOL` is on and `DIMTP` and `DIMTM` are set to the
+     * same value, a tolerance value is drawn.
+     *
+     * If `DIMTM` and `DIMTP` values differ, the upper tolerance is drawn above the lower and a plus
+     * sign is added to the `DIMTP` value if it is positive.
+     *
+     * Parsed by group code `47`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-635300D6-9738-44C4-A0B6-176F194533B3
+     */
+    DIMTP: number;
+    /**
+     * Sets the minimum (or lower) tolerance limit for dimension text when `DIMTOL` or `DIMLIM` is on.
+     *
+     * `DIMTM` accepts signed values. If `DIMTOL` is on and `DIMTP` and `DIMTM` are set to the same value,
+     * a tolerance value is drawn.
+     *
+     * If `DIMTM` and `DIMTP` values differ, the upper tolerance is drawn above the lower, and a plus
+     * sign is added to the `DIMTP` value if it is positive.
+     *
+     * For `DIMTM`, the program uses the negative of the value you enter (adding a minus sign if you
+     * specify a positive number and a plus sign if you specify a negative number).
+     *
+     * Parsed by group code `48`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-E2AAD7FB-C563-42A8-B7B4-3A3EC8AA8C68
+     */
+    DIMTM: number;
+    /**
+     * Sets the total length of the extension lines starting from the dimension line toward the dimension origin.
+     *
+     * Parsed by group code `49`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-CC0F54D4-688B-4A14-9926-9840BCB30FCA
+     */
+    DIMFXL: number;
+    /**
+     * Determines the angle of the transverse segment of the dimension line in a jogged radius dimension.
+     *
+     * Jogged radius dimensions are often created when the center point is located off the page.
+     *
+     * Valid settings range is `5` to `90`.
+     *
+     * Parsed by group code `50`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-9C23D722-0792-4585-A40A-B8E3A191999A
+     */
+    DIMJOGANG: number;
+    /**
+     * Controls the background of dimension text.
+     *
+     * Parsed by group code `69`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-4E38E29F-DE85-4791-A2E7-4DC22842B1B4
+     */
+    DIMTFILL: DimensionTextFill;
+    /**
+     * Sets the color for the text background in dimensions.
+     *
+     * Color numbers are displayed in the Select Color dialog box.
+     *
+     * - `0`: BYBLOCK
+     * - `256`: BYLAYER
+     * - `1-255`: ACI color number
+     *
+     * Parsed by group code `70`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-FF6E5A28-35F0-4998-BC72-9EFD4EACCE18
+     */
+    DIMTFILLCLR: number;
+    /**
+     * Appends tolerances to dimension text.
+     *
+     * Setting `DIMTOL` to on (`1`) turns `DIMLIM` off (`0`).
+     *
+     * Parsed by group code `71`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-1FA5DC50-8D40-49A5-9A79-08A4E01D6178
+     */
+    DIMTOL: number;
+    /**
+     * Generates dimension limits as the default text.
+     *
+     * Setting `DIMLIM` to On turns `DIMTOL` off.
+     *
+     * Parsed by group code `72`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-271D1152-D76D-4FD1-B91B-50F8671012A4
+     */
+    DIMLIM: number;
+    /**
+     * Controls the position of dimension text inside the extension lines for all dimension types
+     * **except Ordinate**.
+     *
+     * - `0` Aligns text with the dimension line
+     * - `1` Draws text horizontally
+     *
+     * Parsed by group code `73`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-60CFA531-80FD-45EF-B529-F4FAF5C758B3
+     */
+    DIMTIH: number;
+    /**
+     * Controls the position of dimension text outside the extension lines.
+     *
+     * - `0` Aligns text with the dimension line
+     * - `1` Draws text horizontally
+     *
+     * Parsed by group code `74`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-71B03AC9-ADC1-4859-A9CD-85247BACABBE
+     */
+    DIMTOH: number;
+    /**
+     * Suppresses display of the first extension line.
+     *
+     * - `0` Extension line is not suppressed
+     * - `1` Extension line is suppressed
+     *
+     * Parsed by group code `75`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-491A0E6F-0387-4169-BCB9-40F2432C0B99
+     */
+    DIMSE1: 0 | 1;
+    /**
+     * Suppresses display of the second extension line.
+     *
+     * - `0` Extension line is not suppressed
+     * - `1` Extension line is suppressed
+     *
+     * Parsed by group code `76`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-A2711B05-7F7E-472C-B53E-03B1F168FFEB
+     */
+    DIMSE2: 0 | 1;
+    /**
+     * Controls the vertical position of text in relation to the dimension line.
+     *
+     * Parsed by group code `77`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-60D1241D-CEA7-4493-BD6A-4EF433F3C946
+     */
+    DIMTAD: DimensionTextVertical;
+    /**
+     * Controls the suppression of zeros in the primary unit value.
+     *
+     * Values `0` ~ `3` affect feet-and-inch dimensions only
+     *
+     * Parsed by group code `78`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-A1860981-FE1C-4947-927B-7CD6B8CEF8EE
+     */
+    DIMZIN: DimensionZeroSuppression;
+    /**
+     * Suppresses zeros for angular dimensions.
+     *
+     * Parsed by group code `79`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-69E9BFD3-06A4-468D-88F0-7C9741407194
+     */
+    DIMAZIN: DimensionZeroSuppressionAngular;
+    /**
+     * Controls display of the arc symbol in an arc length dimension.
+     *
+     * Parsed by group code `90`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-1B843AB0-7976-4DD9-9464-6B0A71A34D81
+     */
+    DIMARCSYM: ArcSymbolType;
+    /**
+     * Specifies the height of dimension text, unless the current text style has a fixed height.
+     *
+     * Parsed by group code `140`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-A17A69D7-25EF-4F57-B4EB-D53A56AB909C
+     */
+    DIMTXT: number;
+    /**
+     * Controls drawing of circle or arc center marks and centerlines by the `DIMCENTER`, `DIMDIAMETER`, and `DIMRADIUS` commands.
+     *
+     * For `DIMDIAMETER` and `DIMRADIUS`, the center mark is drawn only if you place the dimension line outside the circle or arc.
+     *
+     * - `= 0` No center marks or lines are drawn
+     * - `< 0` Centerlines are drawn
+     * - `> 0` Center marks are drawn
+     *
+     * Parsed by group code `141`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-19D6EC14-F800-48FC-B459-28E5E7F81DBB
+     */
+    DIMCEN: number;
+    /**
+     * Specifies the size of oblique strokes drawn instead of arrowheads for linear, radius, and diameter dimensioning.
+     *
+     * - `= 0` Draws arrowheads.
+     * - `> 0` Draws oblique strokes instead of arrowheads. The size of the oblique strokes is determined by this value multiplied by the `DIMSCALE` value.
+     *
+     * Parsed by group code `142`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-D225D167-A66B-4617-BC59-C1385069D152
+     */
+    DIMTSZ: number;
+    /**
+     * Controls the multiplier for alternate units.
+     *
+     * If `DIMALT` is turned on, `DIMALTF` multiplies linear dimensions by a factor to produce a value
+     * in an alternate system of measurement. The initial value represents the number of millimeters in an inch.
+     *
+     * Parsed by group code `143`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-4BB25870-8BFF-478D-8C04-88457311AAF2
+     */
+    DIMALTF: number;
+    /**
+     * All linear dimension distances, including radial, diameters, and coordinates, are multiplied by
+     * `DIMLFAC` before being converted to dimension text.
+     *
+     * - `> 0` applied to dimensions in both model space and paper space
+     * - `< 0` applied to paper space only
+     *
+     * `DIMLFAC` applies primarily to nonassociative dimensions (`DIMASSOC` set `0` or `1`). For nonassociative dimensions in paper space, `DIMLFAC` must be set individually for each
+     * layout viewport to accommodate viewport scaling.
+     *
+     * `DIMLFAC` has no effect on angular dimensions, and is not applied to the values held in `DIMRND`,
+     * `DIMTM`, or `DIMTP`.
+     *
+     * Parsed by group code `144`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-B6063785-B199-4A9A-8BD7-2108EB0AB7ED
+     */
+    DIMLFAC: number;
+    /**
+     * Controls the vertical position of dimension text above or below the dimension line.
+     *
+     * The `DIMTVP` value is used when `DIMTAD` is off. The magnitude of the vertical offset of text is
+     * the product of the text height and `DIMTVP`.
+     *
+     * Setting `DIMTVP` to `1.0` is equivalent to setting `DIMTAD` to on.
+     *
+     * The dimension line splits to accommodate the text only if the absolute value of `DIMTVP` is less than `0.7`.
+     *
+     * Parsed by group code `145`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-248E5BFA-F355-4369-A889-291D77070B26
+     */
+    DIMTVP: number;
+    /**
+     * Specifies a scale factor for the text height of fractions and tolerance values relative to the dimension
+     * text height, as set by `DIMTXT`.
+     *
+     * For example, if `DIMTFAC` is set to `1.0`, the text height of fractions and tolerances is the same height
+     * as the dimension text. If `DIMTFAC` is set to `0.7500`, the text height of fractions and tolerances is
+     * three-quarters the size of dimension text.
+     *
+     * Parsed by group code `146`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-0D3CBEEB-CF89-4979-BE42-A123357188DE
+     */
+    DIMTFAC: number;
+    /**
+     * Sets the distance around the dimension text when the dimension line breaks to accommodate dimension text.
+     *
+     * Also sets the gap between annotation and a hook line created with the LEADER command.
+     *
+     * If you enter a negative value, `DIMGAP` places a box around the dimension text.
+     *
+     * The value of `DIMGAP` is also used as the minimum length of each segment of the dimension line.
+     * To locate the components of a linear dimension within the extension lines, enough space must be
+     * available for both arrowheads (2 x `DIMASZ`), both dimension line segments (2 x `DIMGAP`), a
+     * gap on either side of the dimension text (another 2 x `DIMGAP`), and the length of the dimension text,
+     * which depends on its size and number of decimal places displayed.
+     *
+     * Parsed by group code `147`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-EB367187-A5D6-404A-8121-A6D1D25B626A
+     */
+    DIMGAP: number;
+    /**
+     * Rounds off the alternate dimension units.
+     *
+     * Parsed by group code `148`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-B67093DA-6B0D-4E32-8A33-6298A770CAAF
+     */
+    DIMALTRND: number;
+    /**
+     * Controls the display of alternate units in dimensions.
+     *
+     * - `0` Disables alternate units
+     * - `1` Enables alternate units
+     *
+     * Parsed by group code `170`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-D3B737AB-53B7-431E-A794-746DD2EB6209
+     */
+    DIMALT: 0 | 1;
+    /**
+     * Controls the number of decimal places in alternate units.
+     *
+     * If `DIMALT` is turned on, `DIMALTD` sets the number of digits displayed to the right of the
+     * decimal point in the alternate measurement.
+     *
+     * Parsed by group code `171`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-DE3D35C1-C4AB-4A11-9F3A-6E5CF6EE9160
+     */
+    DIMALTD: number;
+    /**
+     * Controls whether a dimension line is drawn between the extension lines even when the text
+     * is placed outside.
+     *
+     * For radius and diameter dimensions, a dimension line is drawn inside the circle or arc
+     * when the text, arrowheads, and leader are placed outside.
+     *
+     * - `0` Does not draw dimension lines between the measured points when arrowheads are placed
+     *       outside the measured points
+     * - `1` Draws dimension lines between the measured points even when arrowheads are placed
+     *       outside the measured points
+     *
+     * Parsed by group code `172`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-40D7439D-C805-4373-879A-E19ACE97FE54
+     */
+    DIMTOFL: 0 | 1;
+    /**
+     * Controls the display of dimension line arrowhead blocks.
+     *
+     * - `0` Use arrowhead blocks set by `DIMBLK`
+     * - `1` Use arrowhead blocks set by `DIMBLK1` and `DIMBLK2`
+     *
+     * Parsed by group code `173`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-1B912FA4-3D88-42BC-93B4-D329DB5DBF1F
+     */
+    DIMSAH: 0 | 1;
+    /**
+     * Draws text between extension lines.
+     *
+     * - `0` For linear and angular dimensions, dimension text is placed inside the extension lines if
+     *    there is sufficient room.
+     * - `1` Draws dimension text between the extension lines even if it would ordinarily be placed
+     *    outside those lines. For radius and diameter dimensions, `DIMTIX` on always forces the dimension
+     *    text outside the circle or arc.
+     *
+     * Parsed by group code `174`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-A553FB59-8741-4500-A7ED-15B02A1F3470
+     */
+    DIMTIX: 0 | 1;
+    /**
+     * Suppresses arrowheads if not enough space is available inside the extension lines.
+     *
+     * - `0` Arrowheads are not suppressed
+     * - `1` Arrowheads are suppressed
+     *
+     * Parsed by group code `175`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-79F0441D-60E2-49AE-80F1-093A5BB588E2
+     */
+    DIMSOXD: 0 | 1;
+    /**
+     * Assigns colors to dimension lines, arrowheads, and dimension leader lines.
+     *
+     * Also controls the color of leader lines created with the `LEADER` command.
+     *
+     * - `0` BYBLOCK
+     * - `256` BYLAYER
+     *
+     * Parsed by group code `176`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-D229D47D-CFF5-461B-BB6F-96A6077D8A81
+     */
+    DIMCLRD: number;
+    /**
+     * Assigns colors to extension lines, center marks, and centerlines.
+     *
+     * - `0` BYBLOCK
+     * - `256` BYLAYER
+     *
+     * Parsed by group code `177`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-9A0E97A2-79E8-49BD-8BE6-88BD802452B0
+     */
+    DIMCLRE: number;
+    /**
+     * Assigns colors to dimension text.
+     *
+     * The color can be any valid color number.
+     *
+     * Parsed by group code `178`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-58388D9A-F3E9-442D-8739-816BDE1DD07E
+     */
+    DIMCLRT: number;
+    /**
+     * Controls the number of precision places displayed in angular dimensions.
+     *
+     * - `-1` Angular dimensions display the number of decimal places specified by `DIMDEC`
+     * - `0 ~ 8` Specifies the number of decimal places displayed in angular dimensions (independent of `DIMDEC`)
+     *
+     * Parsed by group code `179`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-E5C2F9AA-5017-4111-A485-E0456225D691
+     */
+    DIMADEC: number;
+    /**
+     * Obsolete. Use `DIMLUNIT` instead.
+     *
+     * Parsed by group code `270`
+     *
+     * @see https://help.autodesk.com/view/OARX/2025/ENU/?guid=OARX-RefGuide-AcDbDimension__dimunit
+     */
+    DIMUNIT?: number;
+    /**
+     * Sets the number of decimal places displayed for the primary units of a dimension.
+     *
+     * The precision is based on the units or angle format you have selected. Specified value is
+     * applied to angular dimensions when `DIMADEC` is set to `-1`.
+     *
+     * Parseed by group code `271`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-8F311450-A848-4682-81A5-D0EC6E3499C9
+     */
+    DIMDEC: number;
+    /**
+     * Sets the number of decimal places to display in tolerance values for the primary units
+     * in a dimension.
+     *
+     * This system variable has no effect unless `DIMTOL` is set to On.
+     *
+     * The default for `DIMTOL` is Off.
+     *
+     * Parsed by group code `272`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-49EAC810-F707-464B-852D-F0B8D5BC3588
+     */
+    DIMTDEC: number;
+    /**
+     * Sets the units format for alternate units of all dimension substyles **except Angular**.
+     *
+     * Parsed by group code `273`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-3A2EA9D7-30C7-4C89-A09F-DD2AB74B9D13
+     */
+    DIMALTU: DimensionUnit;
+    /**
+     * Sets the number of decimal places for the tolerance values in the alternate units of a dimension.
+     *
+     * Parsed by group code `274`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-4C0568B5-2655-4906-8BAC-3CA273007825
+     */
+    DIMALTTD: number;
+    /**
+     * Sets the units format for angular dimensions.
+     *
+     * Parsed by group code `275`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-30F44A49-4250-42D1-AEF2-5E2914ADB02B
+     */
+    DIMAUNIT: DimensionAngularUnit;
+    /**
+     * Sets the fraction format when `DIMLUNIT` is set to `4` (`Architectural`) or `5` (`Fractional`).
+     *
+     * Parsed by group code `276`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-6A35A398-ED55-4EC3-88F2-23F6FBADF1BE
+     */
+    DIMFRAC: DimensionFractionFormat;
+    /**
+     * Sets units for all dimension types **except Angular**.
+     *
+     * Parsed by group code `277`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-2ECDF7CF-6EEA-4174-B50C-8630D5002C20
+     */
+    DIMLUNIT: number;
+    /**
+     * Specifies a single-character decimal separator to use when creating dimensions whose unit format is decimal.
+     *
+     * It's represented in ASCII code
+     *
+     * Parsed by group code `278`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-0CDD6AA6-CDD8-4C9D-A270-A3DA00DCE63E
+     */
+    DIMDSEP: number;
+    /**
+     * Sets dimension text movement rules.
+     *
+     * Parsed by group code `279`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-10475059-6A2E-40B2-AF30-E92F104E9C03
+     */
+    DIMTMOVE: number;
+    /**
+     * Controls the horizontal positioning of dimension text.
+     *
+     * Parsed by group code `280`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-C67348A9-2260-4135-A7FF-FE0B45211CB0
+     */
+    DIMJUST: DimensionTextHorizontal;
+    /**
+     * Controls suppression of the first dimension line and arrowhead.
+     *
+     * When turned on, suppresses the display of the dimension line and arrowhead between the first
+     * extension line and the text.
+     *
+     * - `0` First dimension line is not suppressed
+     * - `1` First dimension line is suppressed
+     *
+     * Parsed by group code `281`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-B476440D-0BCB-4691-81BA-1B0DC945BE99
+     */
+    DIMSD1: 0 | 1;
+    /**
+     * Controls suppression of the second dimension line and arrowhead.
+     *
+     * When turned on, suppresses the display of the dimension line and arrowhead between the second
+     * extension line and the text.
+     *
+     * - `0` Second dimension line is not suppressed
+     * - `1` Second dimension line is suppressed
+     *
+     * Parsed by group code `282`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-B55002A4-AF9F-41D0-A8B4-EDB8BB078662
+     */
+    DIMSD2: 0 | 1;
+    /**
+     * Sets the vertical justification for tolerance values relative to the nominal dimension text.
+     *
+     * This system variable has no effect unless `DIMTOL` is set to On.
+     *
+     * Parsed by group code `283`
+     *
+     * The default for `DIMTOL` is Off.
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-CF5FAF97-2718-4253-8B4C-9D6D7EB75C59
+     */
+    DIMTOLJ: DimensionTextVertical;
+    /**
+     * Controls the suppression of zeros in tolerance values.
+     *
+     * Values `0` ~ `3` affect feet-and-inch dimensions only.
+     *
+     * Parsed by group code `284`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-944FA6CB-1394-4523-9620-6B1350F0C40E
+     */
+    DIMTZIN: DimensionZeroSuppression;
+    /**
+     * Controls the suppression of zeros for alternate unit dimension values.
+     *
+     * `DIMALTZ` values `0` ~ `3` affect feet-and-inch dimensions only.
+     *
+     * Parsedby group code `285`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-4EAEEC60-4A34-4C5E-BFA4-AEFA8EEB4FB6
+     */
+    DIMALTZ: DimensionZeroSuppression;
+    /**
+     * Controls suppression of zeros in tolerance values.
+     *
+     * Parsed by group code `286`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-846F1DD5-C6B0-4088-BD5D-51D5E62345E2
+     */
+    DIMALTTZ: DimensionZeroSuppression;
+    /**
+     * Obsolete. Use `DIMAFIT` and `DIMTMOVE` instead.
+     *
+     * Parsed by group code `287`
+     *
+     * @see https://help.autodesk.com/view/OARX/2024/ENU/?guid=OARX-RefGuide-AcDbDimension__dimfit
+     */
+    DIMFIT?: number;
+    /**
+     * Controls options for user-positioned text.
+     *
+     * - `0` Cursor controls only the dimension line location
+     * - `1` Cursor controls both the text position and the dimension line location
+     *
+     * Parsed by group code `288`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-4B271261-0596-48DE-BA45-0AB0C7379FA4
+     */
+    DIMUPT: number;
+    /**
+     * Determines how dimension text and arrows are arranged when space is not sufficient to place both within the extension lines.
+     *
+     * Parsed by group code `289`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-2F8FA7E7-C79F-40EA-A416-C4B02D09F310
+     */
+    DIMATFIT: number;
+    /**
+     * Controls whether extension lines are set to a fixed length.
+     *
+     * When DIMFXLON is on (`1`), extension lines are set to the length specified by `DIMFXL`.
+     *
+     * Parsed by group code `290`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-D0E2EA4A-4CA2-4286-9439-55A19726C166
+     */
+    DIMFXLON: 0 | 1;
+    /**
+     * Specifies the reading direction of the dimension text.
+     *
+     * - `0`: Displays dimension text in a Left-to-Right reading style
+     * - `1`: Displays dimension text in a Right-to-Left reading style
+     *
+     * Parsed by group code `294`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-06B9BE91-A2E9-45CB-9B3D-7D5BDD238F5B
+     */
+    DIMTXTDIRECTION: number;
+    /**
+     * Specifies the text style of the dimension.
+     *
+     * Parsed by group code `340`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-2B91DF02-DF27-447D-A395-054814B1F305
+     */
+    DIMTXSTY: string;
+    /**
+     * Sets the arrowhead block displayed at the ends of dimension lines.
+     *
+     * There are pre-defined block names for AutoCAD. For more information, checkout the link in the below.
+     * Be aware that the block names are **case insensitive**.
+     *
+     * Parsed by group code `342`
+     *
+     * @note Annotative blocks cannot be used as custom arrowheads for dimensions or leaders.
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-6E09DCCA-313F-4FF4-BB1B-F41B512B9CC9
+     */
+    DIMBLK: string;
+    /**
+     * Sets the arrowhead for the first end of the dimension line when `DIMSAH` is on.
+     *
+     * For a list of arrowheads, see `DIMBLK`.
+     *
+     * Parsed by group code `343`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-9DCC9697-9B2C-4EF7-9728-FE047DE760B3
+     */
+    DIMBLK1: string;
+    /**
+     * Sets the arrowhead for the second end of the dimension line when `DIMSAH` is on.
+     *
+     * For a list of arrowheads, see `DIMBLK`.
+     *
+     * Parsed by group code `344`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-E81E370B-55A6-49C5-A280-5F54EAF8308B
+     */
+    DIMBLK2: string;
+    /**
+     * Specifies the arrow type for leaders.
+     *
+     * For a list of arrowhead entries, see `DIMBLK`.
+     *
+     * Parsed by group code `341`
+     *
+     * @Note Annotative blocks cannot be used as custom arrowheads for dimensions or leaders.
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-B4374832-C2B4-4555-900C-693625AC58DE
+     */
+    DIMLDRBLK?: string;
+    /**
+     * Sets the linetype of the dimension line. The value is `BYLAYER`, `BYBLOCK`, or the name of a linetype.
+     *
+     * Parsed by group code `345`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-08054AEC-6DB4-4E69-B992-C6D8FC0021EC
+     */
+    DIMLTYPE: string;
+    /**
+     * Sets the linetype of the first extension line. The value is `BYLAYER`, `BYBLOCK`, or the name of a linetype.
+     *
+     * Parsed by group code `346`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-535BAECA-312A-4841-A064-4FDB3469AAD0
+     */
+    DIMLTEX1: string;
+    /**
+     * Sets the linetype of the second extension line. The value is `BYLAYER`, `BYBLOCK`,
+     * or the name of a linetype.
+     *
+     * Parsed by group code `347`
+     *
+     * @see https://help.autodesk.com/view/ACD/2025/ENU/?guid=GUID-E2101E66-6741-40BF-B62D-E8201F51BA7F
+     */
+    DIMLTEX2: string;
+    /**
+     * Assigns lineweight to dimension lines.
+     *
+     * - `-1` Sets the lineweight to `BYLAYER`
+     * - `-2` Sets the lineweight to `BYBLOCK`
+     * - `-3` Sets the lineweight to `DEFAULT` which is controlled by the `LWDEFAULT` system variable.
+     *
+     * Other valid values entered in hundredths of millimeters include `0`, `5`, `9`, `13`, `15`, `18`,
+     * `20`, `25`, `30`, `35`, `40`, `50`, `53`, `60`, `70`, `80`, `90`, `100`, `106`, `120`, `140`, `158`,
+     * `200`, and `211`.
+     *
+     * All values must be entered in hundredths of millimeters. Multiply a value by `2540` to convert
+     * values from inches to hundredths of millimeters.
+     *
+     * Parsed by group code `371`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-8EE72FFB-3EE7-4F10-83EC-45565F1CBCCE
+     */
+    DIMLWD: number;
+    /**
+     * Assigns lineweight to extension lines.
+     *
+     * - `-1` Sets the lineweight to `BYLAYER`
+     * - `-2` Sets the lineweight to `BYBLOCK`
+     * - `-3` Sets the lineweight to `DEFAULT` which is controlled by the `LWDEFAULT` system variable.
+     *
+     * Other valid values entered in hundredths of millimeters include `0`, `5`, `9`, `13`, `15`, `18`,
+     * `20`, `25`, `30`, `35`, `40`, `50`, `53`, `60`, `70`, `80`, `90`, `100`, `106`, `120`, `140`, `158`,
+     * `200`, and `211`.
+     *
+     * All values must be entered in hundredths of millimeters. Multiply a value by `2540` to convert
+     * values from inches to hundredths of millimeters.
+     *
+     * Parsed by group code `372`
+     *
+     * @see https://help.autodesk.com/view/ACD/2024/ENU/?guid=GUID-21DF5F82-4F3A-4F93-8FD6-89A942799468
+     */
+    DIMLWE: number;
+};
+export type DimStylesTableEntry = DimStyleVariables & CommonDxfTableEntry & {
+    name: string;
+    subclassMarker: 'AcDbDimStyleTableRecord';
+};
+//# sourceMappingURL=types.d.ts.map