dxf-json 0.0.20 → 0.0.22

package/src/parser/blocks/blocks.test.ts

@@ -1,97 +0,0 @@
-import DxfArrayScanner from '../DxfArrayScanner';
-import { parseBlock, parseBlocks } from '.';
-import { isMatched } from '../shared';
-
-const content = ` 0
-BLOCK
- 2
-block-0
- 100
-AcDbEntity
- 0
-ENDBLK
- 5
-endblk-0
- 100
-AcDbEntity
- 100
-AcDbBlockEnd
- 0
-BLOCK
- 2
-block-1
- 100
-AcDbEntity
- 0
-ENDBLK
- 5
-endblk-1
- 100
-AcDbEntity
- 100
-AcDbBlockEnd
- 0
-ENDSEC
- 0
-SECTION
- 0
-EOF
-`.split('\n');
-
-describe('BLOCK section', () => {
-    describe('parseBlock', () => {
-        it('parseBlock 한 번 실행하고 나면 scanner.next()가 다음 BLOCK의 <0, BLOCK>를 반환한다.', () => {
-            const scanner = new DxfArrayScanner(content);
-            let curr = scanner.next();
-
-            curr = scanner.next(); // 집어넣을 때 이미 <0, BLOCK>을 소모한 상태여야 함
-            parseBlock(curr, scanner);
-
-            curr = scanner.next();
-
-            expect(curr.code).toBe(0);
-            expect(curr.value).toBe('BLOCK');
-        });
-
-        it('parseBlock은 모든 BLOCK을 소모하여야 한다.', () => {
-            const scanner = new DxfArrayScanner(content);
-            let curr = scanner.next();
-
-            curr = scanner.next();
-            const block0 = parseBlock(curr, scanner);
-
-            curr = scanner.next();
-            expect(isMatched(curr, 0, 'BLOCK')).toBeTruthy();
-
-            curr = scanner.next();
-            const block1 = parseBlock(curr, scanner);
-
-            expect(block0.name).toBe('block-0');
-            expect(block1.name).toBe('block-1');
-        });
-    });
-
-    describe('parseBlocks', () => {
-        it('parseBlocks 한 번 실행하고 나면 scanner.next()가 다음 SECTION의 <0, SECTION>을 반환한다.', () => {
-            const scanner = new DxfArrayScanner(content);
-            let curr = scanner.next();
-
-            parseBlocks(curr, scanner);
-
-            curr = scanner.next();
-
-            expect(curr.code).toBe(0);
-            expect(curr.value).toBe('SECTION');
-        });
-
-        it('parseBlocks는 모든 BLOCK을 반환해야 한다.', () => {
-            const scanner = new DxfArrayScanner(content);
-            let curr = scanner.next();
-
-            const blocks = parseBlocks(curr, scanner);
-
-            expect(blocks['block-0']).toMatchObject({ name: 'block-0' });
-            expect(blocks['block-1']).toMatchObject({ name: 'block-1' });
-        });
-    });
-});

package/src/parser/blocks/index.ts

@@ -1,88 +0,0 @@
-import type DxfArrayScanner from '../DxfArrayScanner';
-import type { ScannerGroup } from '../DxfArrayScanner';
-import { parseEntities } from '../entities';
-import { parsePoint } from '../shared/parsePoint';
-import { ensureHandle, isMatched } from '../shared';
-
-export function parseBlocks(curr: ScannerGroup, scanner: DxfArrayScanner) {
-    let blocks: any = {};
-
-    while (!isMatched(curr, 0, 'EOF')) {
-        if (isMatched(curr, 0, 'ENDSEC')) {
-            break;
-        }
-
-        if (isMatched(curr, 0, 'BLOCK')) {
-            curr = scanner.next();
-            const block = parseBlock(curr, scanner);
-
-            ensureHandle(block);
-            if (block.name) {
-                blocks[block.name] = block;
-            }
-        }
-
-        curr = scanner.next();
-    }
-    return blocks;
-}
-
-export function parseBlock(curr: ScannerGroup, scanner: DxfArrayScanner) {
-    let block: any = {};
-
-    while (!isMatched(curr, 0, 'EOF')) {
-        if (isMatched(curr, 0, 'ENDBLK')) {
-            // 당장 ENDBLK 파싱이 없어서 임시로 대충 소비함
-            // 소비 안하면 ENTITY에 딸려들어가서 문제 생김
-            curr = scanner.next();
-            while (!isMatched(curr, 0, 'EOF')) {
-                if (isMatched(curr, 100, 'AcDbBlockEnd')) {
-                    return block;
-                }
-                curr = scanner.next();
-            }
-            break;
-        }
-
-        switch (curr.code) {
-            case 1:
-                block.xrefPath = curr.value;
-                break;
-            case 2:
-                block.name = curr.value;
-                break;
-            case 3:
-                block.name2 = curr.value;
-                break;
-            case 5:
-                block.handle = curr.value;
-                break;
-            case 8:
-                block.layer = curr.value;
-                break;
-            case 10:
-                block.position = parsePoint(scanner);
-                break;
-            case 67:
-                block.paperSpace = curr.value && curr.value == 1 ? true : false;
-                break;
-            case 70:
-                if (curr.value !== 0) {
-                    block.type = curr.value;
-                }
-                break;
-            case 100:
-                // ignore class markers
-                break;
-            case 330:
-                block.ownerHandle = curr.value;
-                break;
-            case 0:
-                block.entities = parseEntities(curr, scanner);
-                break;
-        }
-
-        curr = scanner.next();
-    }
-    return block;
-}

package/src/parser/blocks/types.ts

@@ -1,15 +0,0 @@
-import type { Point3D } from '../../types';
-import type { CommonDxfEntity } from '../entities/shared';
-
-export interface DxfBlock {
-    type: number; // bit flag of BlockTypeFlag
-    name: string;
-    name2: string;
-    handle: string;
-    ownerHandle: string;
-    layer: string;
-    position: Point3D;
-    paperSpace: boolean;
-    xrefPath: string;
-    entities?: CommonDxfEntity[];
-}

package/src/parser/entities/arc/index.ts

@@ -1,2 +0,0 @@
-export * from './types';
-export * from './parser';

package/src/parser/entities/arc/parser.ts

@@ -1,67 +0,0 @@
-import type DxfArrayScanner from '../../DxfArrayScanner';
-import type { ScannerGroup } from '../../DxfArrayScanner';
-import {
-    createParser,
-    DXFParserSnippet,
-    Identity,
-    PointParser,
-} from '../../shared/parserGenerator';
-import { CommonEntitySnippets } from '../shared';
-
-const DefaultArcEntity = {
-    extrusionDirection: { x: 0, y: 0, z: 1 },
-};
-
-const ArcEntityParserSnippets: DXFParserSnippet[] = [
-    {
-        code: 210,
-        name: 'extrusionDirection',
-        parser: PointParser,
-    },
-    {
-        code: 51,
-        name: 'endAngle',
-        parser: Identity,
-    },
-    {
-        code: 50,
-        name: 'startAngle',
-        parser: Identity,
-    },
-    {
-        code: 100,
-        name: 'subclassMarker',
-        parser: Identity,
-    },
-    {
-        code: 40,
-        name: 'radius',
-        parser: Identity,
-    },
-    {
-        code: 10,
-        name: 'center',
-        parser: PointParser,
-    },
-    {
-        code: 39,
-        name: 'thickness',
-        parser: Identity,
-    },
-    {
-        // skip for AcDbCircle
-        code: 100,
-    },
-    ...CommonEntitySnippets,
-];
-
-export class ArcEntityParser {
-    static ForEntityName = 'ARC';
-    private parser = createParser(ArcEntityParserSnippets, DefaultArcEntity);
-
-    parseEntity(scanner: DxfArrayScanner, curr: ScannerGroup) {
-        const entity = {} as any;
-        this.parser(curr, scanner, entity);
-        return entity;
-    }
-}

package/src/parser/entities/arc/types.ts

@@ -1,13 +0,0 @@
-import type { Point3D } from '../../../types';
-import type { CommonDxfEntity } from '../shared';
-
-export interface ArcEntity extends CommonDxfEntity {
-    type: 'ARC';
-    subclassMarker: 'AcDbArc';
-    thickness: number;
-    center: Point3D;
-    radius: number;
-    startAngle: number;
-    endAngle: number;
-    extrusionDirection: Point3D;
-}

package/src/parser/entities/attdef/consts.ts

@@ -1,12 +0,0 @@
-export enum AttributeFlag {
-    NONE = 0,
-    INVISIBLE = 1,
-    CONSTANT = 2,
-    VERIFICATION_REQUIRED = 4,
-    PRESET = 8,
-}
-
-export enum AttDefMTextFlag {
-    MULTILINE = 2,
-    CONSTANT_MULTILINE = 4,
-}

package/src/parser/entities/attdef/index.ts

@@ -1,3 +0,0 @@
-export * from './types';
-export * from './consts';
-export * from './parser';

package/src/parser/entities/attdef/parser.ts

@@ -1,119 +0,0 @@
-import type DxfArrayScanner from '../../DxfArrayScanner';
-import type { ScannerGroup } from '../../DxfArrayScanner';
-import {
-    createParser,
-    DXFParserSnippet,
-    Identity,
-    PointParser,
-    ToBoolean,
-} from '../../shared/parserGenerator';
-import { DefaultTextEntity, TextEntityParserSnippets } from '../text';
-import type { AttdefEntity } from './types';
-
-const DefaultAttDefEntity = {
-    ...DefaultTextEntity,
-};
-
-const AttDefEntityParserSnippets: DXFParserSnippet[] = [
-    {
-        code: 2, // tag. 왜 다시 나오는지 모르겠음
-    },
-    {
-        code: 40,
-        name: 'annotationScale',
-        parser: Identity,
-    },
-    {
-        code: 10,
-        name: 'alignmentPoint',
-        parser: PointParser,
-    },
-    {
-        code: 340,
-        name: 'secondaryAttributesHardIds',
-        isMultiple: true,
-        parser: Identity,
-    },
-    {
-        code: 70,
-        name: 'numberOfSecondaryAttributes',
-        parser: Identity,
-    },
-    {
-        code: 70,
-        name: 'isReallyLocked',
-        parser: ToBoolean,
-    },
-    {
-        code: 70,
-        name: 'mtextFlag',
-        parser: Identity,
-    },
-    {
-        code: 280,
-        name: 'isDuplicatedRecord',
-        parser: ToBoolean,
-    },
-    {
-        code: 100, // AcDbXrecord, skip
-    },
-    {
-        code: 280,
-        name: 'isLocked',
-        parser: ToBoolean,
-    },
-    {
-        code: 74,
-        name: 'valign',
-        parser: Identity,
-    },
-    {
-        code: 73, // field length, useless
-    },
-    {
-        code: 70,
-        name: 'attributeFlag',
-        parser: Identity,
-    },
-    {
-        code: 2,
-        name: 'tag',
-        parser: Identity,
-    },
-    {
-        code: 3,
-        name: 'prompt',
-        parser: Identity,
-    },
-    {
-        code: 280, // version number, always 0, useless
-    },
-    {
-        code: 100,
-        name: 'subclassMarker',
-        parser: Identity,
-    },
-    ...TextEntityParserSnippets.slice(2),
-];
-
-export class AttDefEntityParser {
-    static ForEntityName = 'ATTDEF';
-    private parser = createParser(
-        AttDefEntityParserSnippets,
-        DefaultAttDefEntity,
-    );
-
-    parseEntity(scanner: DxfArrayScanner, curr: ScannerGroup) {
-        const entity = {} as any;
-        this.parser(curr, scanner, entity);
-        return entity as AttdefEntity;
-    }
-}
-
-// entity.invisible = !!(curr.value & 0x01);
-// entity.constant = !!(curr.value & 0x02);
-// entity.verificationRequired = !!(curr.value & 0x04);
-// entity.preset = !!(curr.value & 0x08);
-
-// entity.backwards = !!(curr.value & 0x02);
-// entity.mirrored = !!(curr.value & 0x04);

package/src/parser/entities/attdef/types.ts

@@ -1,19 +0,0 @@
-import type { Point3D } from '../../../types';
-import type { TextEntity } from '../text';
-
-export interface AttdefEntity
-    extends Omit<TextEntity, 'type' | 'subclassMarker'> {
-    type: 'ATTDEF';
-    subclassMarker: 'AcDbAttributeDefinition';
-    prompt: string;
-    tag: string;
-    attributeFlag: number;
-    isLocked: boolean;
-    isDuplicatedRecord: boolean;
-    mtextFlag: number;
-    isReallyLocked: boolean;
-    numberOfSecondaryAttributes: number;
-    secondaryAttributesHardIds: string[];
-    alignmentPoint: Point3D;
-    annotationScale: number;
-}

package/src/parser/entities/attribute/consts.ts

@@ -1,6 +0,0 @@
-export enum AttributeFlag {
-    INVISIBLE = 1,
-    CONSTANT = 2,
-    REQUIRE_VERIFICATION = 4,
-    PRESET = 8,
-}

package/src/parser/entities/attribute/index.ts

@@ -1,3 +0,0 @@
-export * from './types';
-export * from './consts';
-export * from './parser';

package/src/parser/entities/attribute/parser.ts

@@ -1,198 +0,0 @@
-import type DxfArrayScanner from '../../DxfArrayScanner';
-import type { ScannerGroup } from '../../DxfArrayScanner';
-import {
-    Abort,
-    createParser,
-    DXFParserSnippet,
-    Identity,
-    PointParser,
-    ToBoolean,
-} from '../../shared/parserGenerator';
-import { isMatched } from '../../shared';
-import { CommonEntitySnippets } from '../shared';
-import { MTextEntityParserSnippets } from '../mtext';
-import { AttributeEntity } from './types';
-
-const DefaultAttributeEntity = {
-    thickness: 0,
-    rotation: 0,
-    scale: 1,
-    obliqueAngle: 0,
-    textStyle: 'STANDARD',
-    textGenerationFlag: 0,
-    horizontalJustification: 0,
-    verticalJustification: 0,
-    extrusionDirection: { x: 0, y: 0, z: 1 },
-};
-
-const AttributeSnippets: DXFParserSnippet[] = [
-    ...MTextEntityParserSnippets.slice(
-        MTextEntityParserSnippets.findIndex(
-            ({ name }) => name === 'columnType',
-        ),
-        MTextEntityParserSnippets.findIndex(
-            ({ name }) => name === 'subclassMarker',
-        ) + 1,
-    ),
-    // 67, 8은 common에 있음
-    {
-        code: 100, // AcDbEntity
-    },
-    {
-        // MTEXT가 필수로 따라오지 않는 경우도 있기 때문에 이 경우 탈출 필요
-        code: 0,
-        parser(curr) {
-            if (!isMatched(curr, 0, 'MTEXT')) return Abort;
-            return undefined;
-        },
-    },
-    {
-        code: 2,
-        name: 'definitionTag',
-        parser: Identity,
-    },
-    {
-        code: 40,
-        name: 'annotationScale',
-        parser: Identity,
-    },
-    {
-        code: 10,
-        name: 'alignmentPoint',
-        parser: PointParser,
-    },
-    {
-        code: 340,
-        name: 'secondaryAttributesHardId',
-        parser: Identity,
-    },
-    {
-        code: 70,
-        name: 'numberOfSecondaryAttributes',
-        parser: Identity,
-    },
-    {
-        code: 70,
-        name: 'isReallyLocked',
-        parser: ToBoolean,
-    },
-    {
-        code: 70,
-        name: 'mtextFlag',
-        parser: Identity,
-    },
-    {
-        code: 280,
-        name: 'isDuplicatedEntriesKeep',
-        parser: ToBoolean,
-    },
-    {
-        code: 100, // AcDbXRecord
-    },
-    {
-        code: 280,
-        name: 'lockPositionFlag',
-        parser: ToBoolean,
-    },
-    {
-        code: 210,
-        name: 'extrusionDirection',
-        parser: PointParser,
-    },
-    {
-        code: 11,
-        name: 'alignmentPoint',
-        parser: PointParser,
-    },
-    {
-        code: 74,
-        name: 'verticalJustification',
-        parser: Identity,
-    },
-    {
-        code: 72,
-        name: 'horizontalJustification',
-        parser: Identity,
-    },
-    {
-        code: 71,
-        name: 'textGenerationFlag', // attachmentPoint
-        parser: Identity,
-    },
-    {
-        code: 7,
-        name: 'textStyle',
-        parser: Identity,
-    },
-    {
-        code: 51,
-        name: 'obliqueAngle',
-        parser: Identity,
-    },
-    {
-        code: 41,
-        name: 'scale',
-        parser: Identity,
-    },
-    {
-        code: 50,
-        name: 'rotation',
-        parser: Identity,
-    },
-    {
-        code: 73, // 미사용
-    },
-    {
-        code: 70,
-        name: 'attributeFlag',
-        parser: Identity,
-    },
-    {
-        code: 2,
-        name: 'tag',
-        parser: Identity,
-    },
-    {
-        code: 280, // version number, 미사용
-    },
-    {
-        code: 100, // AcDbAttribute
-        name: 'subclassMarker',
-        parser: Identity,
-    },
-    {
-        code: 1,
-        name: 'text',
-        parser: Identity,
-    },
-    {
-        code: 40,
-        name: 'textHeight',
-        parser: Identity,
-    },
-    {
-        code: 10,
-        name: 'startPoint',
-        parser: PointParser,
-    },
-    {
-        code: 39,
-        name: 'thickness',
-        parser: Identity,
-    },
-    {
-        code: 100, // AcDbText
-    },
-    ...CommonEntitySnippets,
-];
-
-export class AttributeEntityParser {
-    static ForEntityName = 'ATTRIB';
-    private parser = createParser(AttributeSnippets, DefaultAttributeEntity);
-
-    parseEntity(scanner: DxfArrayScanner, curr: ScannerGroup) {
-        const entity = {} as any;
-        this.parser(curr, scanner, entity);
-        return entity as AttributeEntity;
-    }
-}

package/src/parser/entities/attribute/types.ts

@@ -1,31 +0,0 @@
-import type { Point3D } from '../../../types';
-import type { CommonDxfEntity } from '../shared';
-
-export interface AttributeEntity extends CommonDxfEntity {
-    type: 'ATTRIB';
-    subclassMarker: 'AcDbAttribute';
-    thickness: number;
-    startPoint: Point3D;
-    textHeight: number;
-    text: string;
-    tag: string; // cannot contain spaces
-    attributeFlag: number;
-    lineSpacing?: number;
-    rotation: number;
-    scale: number;
-    obliqueAngle: number;
-    textStyle: string;
-    textGenerationFlag: number;
-    horizontalJustification: number;
-    verticalJustification: number;
-    extrusionDirection: Point3D;
-    lockPositionFlag: boolean;
-    isDuplicatedEntriesKeep?: boolean;
-    mtextFlag: 2 | 4;
-    isReallyLocked?: boolean;
-    numberOfSecondaryAttributes?: number;
-    secondaryAttributesHardId?: string;
-    alignmentPoint: Point3D;
-    annotationScale?: number;
-    definitionTag?: string;
-}

package/src/parser/entities/circle/index.ts

@@ -1,2 +0,0 @@
-export * from './types';
-export * from './parser';