duckdb 0.9.3-dev0.0 → 0.9.3-dev12.0

package/src/duckdb/third_party/mbedtls/include/mbedtls/aes.h

@@ -1 +1,640 @@
-// dummy file to make amalgamantion happy
+/**
+* \file aes.h
+*
+* \brief   This file contains AES definitions and functions.
+*
+*          The Advanced Encryption Standard (AES) specifies a FIPS-approved
+*          cryptographic algorithm that can be used to protect electronic
+*          data.
+*
+*          The AES algorithm is a symmetric block cipher that can
+*          encrypt and decrypt information. For more information, see
+*          <em>FIPS Publication 197: Advanced Encryption Standard</em> and
+*          <em>ISO/IEC 18033-2:2006: Information technology -- Security
+*          techniques -- Encryption algorithms -- Part 2: Asymmetric
+*          ciphers</em>.
+*
+*          The AES-XTS block mode is standardized by NIST SP 800-38E
+*          <https://nvlpubs.nist.gov/nistpubs/legacy/sp/nistspecialpublication800-38e.pdf>
+*          and described in detail by IEEE P1619
+*          <https://ieeexplore.ieee.org/servlet/opac?punumber=4375278>.
+*/
+
+/*
+*  Copyright The Mbed TLS Contributors
+*  SPDX-License-Identifier: Apache-2.0
+*
+*  Licensed under the Apache License, Version 2.0 (the "License"); you may
+*  not use this file except in compliance with the License.
+*  You may obtain a copy of the License at
+*
+*  http://www.apache.org/licenses/LICENSE-2.0
+*
+*  Unless required by applicable law or agreed to in writing, software
+*  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+*  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+*  See the License for the specific language governing permissions and
+*  limitations under the License.
+*/
+
+#ifndef MBEDTLS_AES_H
+#define MBEDTLS_AES_H
+#include "mbedtls/private_access.h"
+
+#include "mbedtls/build_info.h"
+#include "mbedtls/platform_util.h"
+
+#include <stddef.h>
+#include <stdint.h>
+
+/* padlock.c and aesni.c rely on these values! */
+#define MBEDTLS_AES_ENCRYPT     1 /**< AES encryption. */
+#define MBEDTLS_AES_DECRYPT     0 /**< AES decryption. */
+
+/* Error codes in range 0x0020-0x0022 */
+/** Invalid key length. */
+#define MBEDTLS_ERR_AES_INVALID_KEY_LENGTH                -0x0020
+/** Invalid data input length. */
+#define MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH              -0x0022
+
+/* Error codes in range 0x0021-0x0025 */
+/** Invalid input data. */
+#define MBEDTLS_ERR_AES_BAD_INPUT_DATA                    -0x0021
+
+#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
+   !defined(inline) && !defined(__cplusplus)
+#define inline __inline
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if !defined(MBEDTLS_AES_ALT)
+// Regular implementation
+//
+
+/**
+* \brief The AES context-type definition.
+*/
+typedef struct mbedtls_aes_context
+{
+   int MBEDTLS_PRIVATE(nr);                     /*!< The number of rounds. */
+   uint32_t *MBEDTLS_PRIVATE(rk);               /*!< AES round keys. */
+   uint32_t MBEDTLS_PRIVATE(buf)[68];           /*!< Unaligned data buffer. This buffer can
+						  hold 32 extra Bytes, which can be used for
+						  one of the following purposes:
+						  <ul><li>Alignment if VIA padlock is
+								  used.</li>
+						  <li>Simplifying key expansion in the 256-bit
+							  case by generating an extra round key.
+							  </li></ul> */
+}
+mbedtls_aes_context;
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+* \brief The AES XTS context-type definition.
+*/
+typedef struct mbedtls_aes_xts_context
+{
+   mbedtls_aes_context MBEDTLS_PRIVATE(crypt); /*!< The AES context to use for AES block
+									   encryption or decryption. */
+   mbedtls_aes_context MBEDTLS_PRIVATE(tweak); /*!< The AES context used for tweak
+									   computation. */
+} mbedtls_aes_xts_context;
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
+#else  /* MBEDTLS_AES_ALT */
+#include "mbedtls/aes_alt.h"
+#endif /* MBEDTLS_AES_ALT */
+
+/**
+* \brief          This function initializes the specified AES context.
+*
+*                 It must be the first API called before using
+*                 the context.
+*
+* \param ctx      The AES context to initialize. This must not be \c NULL.
+*/
+void mbedtls_aes_init( mbedtls_aes_context *ctx );
+
+/**
+* \brief          This function releases and clears the specified AES context.
+*
+* \param ctx      The AES context to clear.
+*                 If this is \c NULL, this function does nothing.
+*                 Otherwise, the context must have been at least initialized.
+*/
+void mbedtls_aes_free( mbedtls_aes_context *ctx );
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+* \brief          This function initializes the specified AES XTS context.
+*
+*                 It must be the first API called before using
+*                 the context.
+*
+* \param ctx      The AES XTS context to initialize. This must not be \c NULL.
+*/
+void mbedtls_aes_xts_init( mbedtls_aes_xts_context *ctx );
+
+/**
+* \brief          This function releases and clears the specified AES XTS context.
+*
+* \param ctx      The AES XTS context to clear.
+*                 If this is \c NULL, this function does nothing.
+*                 Otherwise, the context must have been at least initialized.
+*/
+void mbedtls_aes_xts_free( mbedtls_aes_xts_context *ctx );
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
+/**
+* \brief          This function sets the encryption key.
+*
+* \param ctx      The AES context to which the key should be bound.
+*                 It must be initialized.
+* \param key      The encryption key.
+*                 This must be a readable buffer of size \p keybits bits.
+* \param keybits  The size of data passed in bits. Valid options are:
+*                 <ul><li>128 bits</li>
+*                 <li>192 bits</li>
+*                 <li>256 bits</li></ul>
+*
+* \return         \c 0 on success.
+* \return         #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_setkey_enc( mbedtls_aes_context *ctx, const unsigned char *key,
+						  unsigned int keybits );
+
+/**
+* \brief          This function sets the decryption key.
+*
+* \param ctx      The AES context to which the key should be bound.
+*                 It must be initialized.
+* \param key      The decryption key.
+*                 This must be a readable buffer of size \p keybits bits.
+* \param keybits  The size of data passed. Valid options are:
+*                 <ul><li>128 bits</li>
+*                 <li>192 bits</li>
+*                 <li>256 bits</li></ul>
+*
+* \return         \c 0 on success.
+* \return         #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_setkey_dec( mbedtls_aes_context *ctx, const unsigned char *key,
+						  unsigned int keybits );
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+* \brief          This function prepares an XTS context for encryption and
+*                 sets the encryption key.
+*
+* \param ctx      The AES XTS context to which the key should be bound.
+*                 It must be initialized.
+* \param key      The encryption key. This is comprised of the XTS key1
+*                 concatenated with the XTS key2.
+*                 This must be a readable buffer of size \p keybits bits.
+* \param keybits  The size of \p key passed in bits. Valid options are:
+*                 <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
+*                 <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
+*
+* \return         \c 0 on success.
+* \return         #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_xts_setkey_enc( mbedtls_aes_xts_context *ctx,
+							  const unsigned char *key,
+							  unsigned int keybits );
+
+/**
+* \brief          This function prepares an XTS context for decryption and
+*                 sets the decryption key.
+*
+* \param ctx      The AES XTS context to which the key should be bound.
+*                 It must be initialized.
+* \param key      The decryption key. This is comprised of the XTS key1
+*                 concatenated with the XTS key2.
+*                 This must be a readable buffer of size \p keybits bits.
+* \param keybits  The size of \p key passed in bits. Valid options are:
+*                 <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li>
+*                 <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul>
+*
+* \return         \c 0 on success.
+* \return         #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_xts_setkey_dec( mbedtls_aes_xts_context *ctx,
+							  const unsigned char *key,
+							  unsigned int keybits );
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
+/**
+* \brief          This function performs an AES single-block encryption or
+*                 decryption operation.
+*
+*                 It performs the operation defined in the \p mode parameter
+*                 (encrypt or decrypt), on the input data buffer defined in
+*                 the \p input parameter.
+*
+*                 mbedtls_aes_init(), and either mbedtls_aes_setkey_enc() or
+*                 mbedtls_aes_setkey_dec() must be called before the first
+*                 call to this API with the same context.
+*
+* \param ctx      The AES context to use for encryption or decryption.
+*                 It must be initialized and bound to a key.
+* \param mode     The AES operation: #MBEDTLS_AES_ENCRYPT or
+*                 #MBEDTLS_AES_DECRYPT.
+* \param input    The buffer holding the input data.
+*                 It must be readable and at least \c 16 Bytes long.
+* \param output   The buffer where the output data will be written.
+*                 It must be writeable and at least \c 16 Bytes long.
+
+* \return         \c 0 on success.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_crypt_ecb( mbedtls_aes_context *ctx,
+						 int mode,
+						 const unsigned char input[16],
+						 unsigned char output[16] );
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+/**
+* \brief  This function performs an AES-CBC encryption or decryption operation
+*         on full blocks.
+*
+*         It performs the operation defined in the \p mode
+*         parameter (encrypt/decrypt), on the input data buffer defined in
+*         the \p input parameter.
+*
+*         It can be called as many times as needed, until all the input
+*         data is processed. mbedtls_aes_init(), and either
+*         mbedtls_aes_setkey_enc() or mbedtls_aes_setkey_dec() must be called
+*         before the first call to this API with the same context.
+*
+* \note   This function operates on full blocks, that is, the input size
+*         must be a multiple of the AES block size of \c 16 Bytes.
+*
+* \note   Upon exit, the content of the IV is updated so that you can
+*         call the same function again on the next
+*         block(s) of data and get the same result as if it was
+*         encrypted in one call. This allows a "streaming" usage.
+*         If you need to retain the contents of the IV, you should
+*         either save it manually or use the cipher module instead.
+*
+*
+* \param ctx      The AES context to use for encryption or decryption.
+*                 It must be initialized and bound to a key.
+* \param mode     The AES operation: #MBEDTLS_AES_ENCRYPT or
+*                 #MBEDTLS_AES_DECRYPT.
+* \param length   The length of the input data in Bytes. This must be a
+*                 multiple of the block size (\c 16 Bytes).
+* \param iv       Initialization vector (updated after use).
+*                 It must be a readable and writeable buffer of \c 16 Bytes.
+* \param input    The buffer holding the input data.
+*                 It must be readable and of size \p length Bytes.
+* \param output   The buffer holding the output data.
+*                 It must be writeable and of size \p length Bytes.
+*
+* \return         \c 0 on success.
+* \return         #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH
+*                 on failure.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_crypt_cbc( mbedtls_aes_context *ctx,
+						 int mode,
+						 size_t length,
+						 unsigned char iv[16],
+						 const unsigned char *input,
+						 unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CBC */
+
+#if defined(MBEDTLS_CIPHER_MODE_XTS)
+/**
+* \brief      This function performs an AES-XTS encryption or decryption
+*             operation for an entire XTS data unit.
+*
+*             AES-XTS encrypts or decrypts blocks based on their location as
+*             defined by a data unit number. The data unit number must be
+*             provided by \p data_unit.
+*
+*             NIST SP 800-38E limits the maximum size of a data unit to 2^20
+*             AES blocks. If the data unit is larger than this, this function
+*             returns #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH.
+*
+* \param ctx          The AES XTS context to use for AES XTS operations.
+*                     It must be initialized and bound to a key.
+* \param mode         The AES operation: #MBEDTLS_AES_ENCRYPT or
+*                     #MBEDTLS_AES_DECRYPT.
+* \param length       The length of a data unit in Bytes. This can be any
+*                     length between 16 bytes and 2^24 bytes inclusive
+*                     (between 1 and 2^20 block cipher blocks).
+* \param data_unit    The address of the data unit encoded as an array of 16
+*                     bytes in little-endian format. For disk encryption, this
+*                     is typically the index of the block device sector that
+*                     contains the data.
+* \param input        The buffer holding the input data (which is an entire
+*                     data unit). This function reads \p length Bytes from \p
+*                     input.
+* \param output       The buffer holding the output data (which is an entire
+*                     data unit). This function writes \p length Bytes to \p
+*                     output.
+*
+* \return             \c 0 on success.
+* \return             #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH if \p length is
+*                     smaller than an AES block in size (16 Bytes) or if \p
+*                     length is larger than 2^20 blocks (16 MiB).
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_crypt_xts( mbedtls_aes_xts_context *ctx,
+						 int mode,
+						 size_t length,
+						 const unsigned char data_unit[16],
+						 const unsigned char *input,
+						 unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_XTS */
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+/**
+* \brief This function performs an AES-CFB128 encryption or decryption
+*        operation.
+*
+*        It performs the operation defined in the \p mode
+*        parameter (encrypt or decrypt), on the input data buffer
+*        defined in the \p input parameter.
+*
+*        For CFB, you must set up the context with mbedtls_aes_setkey_enc(),
+*        regardless of whether you are performing an encryption or decryption
+*        operation, that is, regardless of the \p mode parameter. This is
+*        because CFB mode uses the same key schedule for encryption and
+*        decryption.
+*
+* \note  Upon exit, the content of the IV is updated so that you can
+*        call the same function again on the next
+*        block(s) of data and get the same result as if it was
+*        encrypted in one call. This allows a "streaming" usage.
+*        If you need to retain the contents of the
+*        IV, you must either save it manually or use the cipher
+*        module instead.
+*
+*
+* \param ctx      The AES context to use for encryption or decryption.
+*                 It must be initialized and bound to a key.
+* \param mode     The AES operation: #MBEDTLS_AES_ENCRYPT or
+*                 #MBEDTLS_AES_DECRYPT.
+* \param length   The length of the input data in Bytes.
+* \param iv_off   The offset in IV (updated after use).
+*                 It must point to a valid \c size_t.
+* \param iv       The initialization vector (updated after use).
+*                 It must be a readable and writeable buffer of \c 16 Bytes.
+* \param input    The buffer holding the input data.
+*                 It must be readable and of size \p length Bytes.
+* \param output   The buffer holding the output data.
+*                 It must be writeable and of size \p length Bytes.
+*
+* \return         \c 0 on success.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_crypt_cfb128( mbedtls_aes_context *ctx,
+							int mode,
+							size_t length,
+							size_t *iv_off,
+							unsigned char iv[16],
+							const unsigned char *input,
+							unsigned char *output );
+
+/**
+* \brief This function performs an AES-CFB8 encryption or decryption
+*        operation.
+*
+*        It performs the operation defined in the \p mode
+*        parameter (encrypt/decrypt), on the input data buffer defined
+*        in the \p input parameter.
+*
+*        Due to the nature of CFB, you must use the same key schedule for
+*        both encryption and decryption operations. Therefore, you must
+*        use the context initialized with mbedtls_aes_setkey_enc() for
+*        both #MBEDTLS_AES_ENCRYPT and #MBEDTLS_AES_DECRYPT.
+*
+* \note  Upon exit, the content of the IV is updated so that you can
+*        call the same function again on the next
+*        block(s) of data and get the same result as if it was
+*        encrypted in one call. This allows a "streaming" usage.
+*        If you need to retain the contents of the
+*        IV, you should either save it manually or use the cipher
+*        module instead.
+*
+*
+* \param ctx      The AES context to use for encryption or decryption.
+*                 It must be initialized and bound to a key.
+* \param mode     The AES operation: #MBEDTLS_AES_ENCRYPT or
+*                 #MBEDTLS_AES_DECRYPT
+* \param length   The length of the input data.
+* \param iv       The initialization vector (updated after use).
+*                 It must be a readable and writeable buffer of \c 16 Bytes.
+* \param input    The buffer holding the input data.
+*                 It must be readable and of size \p length Bytes.
+* \param output   The buffer holding the output data.
+*                 It must be writeable and of size \p length Bytes.
+*
+* \return         \c 0 on success.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_crypt_cfb8( mbedtls_aes_context *ctx,
+						  int mode,
+						  size_t length,
+						  unsigned char iv[16],
+						  const unsigned char *input,
+						  unsigned char *output );
+#endif /*MBEDTLS_CIPHER_MODE_CFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_OFB)
+/**
+* \brief       This function performs an AES-OFB (Output Feedback Mode)
+*              encryption or decryption operation.
+*
+*              For OFB, you must set up the context with
+*              mbedtls_aes_setkey_enc(), regardless of whether you are
+*              performing an encryption or decryption operation. This is
+*              because OFB mode uses the same key schedule for encryption and
+*              decryption.
+*
+*              The OFB operation is identical for encryption or decryption,
+*              therefore no operation mode needs to be specified.
+*
+* \note        Upon exit, the content of iv, the Initialisation Vector, is
+*              updated so that you can call the same function again on the next
+*              block(s) of data and get the same result as if it was encrypted
+*              in one call. This allows a "streaming" usage, by initialising
+*              iv_off to 0 before the first call, and preserving its value
+*              between calls.
+*
+*              For non-streaming use, the iv should be initialised on each call
+*              to a unique value, and iv_off set to 0 on each call.
+*
+*              If you need to retain the contents of the initialisation vector,
+*              you must either save it manually or use the cipher module
+*              instead.
+*
+* \warning     For the OFB mode, the initialisation vector must be unique
+*              every encryption operation. Reuse of an initialisation vector
+*              will compromise security.
+*
+* \param ctx      The AES context to use for encryption or decryption.
+*                 It must be initialized and bound to a key.
+* \param length   The length of the input data.
+* \param iv_off   The offset in IV (updated after use).
+*                 It must point to a valid \c size_t.
+* \param iv       The initialization vector (updated after use).
+*                 It must be a readable and writeable buffer of \c 16 Bytes.
+* \param input    The buffer holding the input data.
+*                 It must be readable and of size \p length Bytes.
+* \param output   The buffer holding the output data.
+*                 It must be writeable and of size \p length Bytes.
+*
+* \return         \c 0 on success.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_crypt_ofb( mbedtls_aes_context *ctx,
+						 size_t length,
+						 size_t *iv_off,
+						 unsigned char iv[16],
+						 const unsigned char *input,
+						 unsigned char *output );
+
+#endif /* MBEDTLS_CIPHER_MODE_OFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_CTR)
+/**
+* \brief      This function performs an AES-CTR encryption or decryption
+*             operation.
+*
+*             Due to the nature of CTR, you must use the same key schedule
+*             for both encryption and decryption operations. Therefore, you
+*             must use the context initialized with mbedtls_aes_setkey_enc()
+*             for both #MBEDTLS_AES_ENCRYPT and #MBEDTLS_AES_DECRYPT.
+*
+* \warning    You must never reuse a nonce value with the same key. Doing so
+*             would void the encryption for the two messages encrypted with
+*             the same nonce and key.
+*
+*             There are two common strategies for managing nonces with CTR:
+*
+*             1. You can handle everything as a single message processed over
+*             successive calls to this function. In that case, you want to
+*             set \p nonce_counter and \p nc_off to 0 for the first call, and
+*             then preserve the values of \p nonce_counter, \p nc_off and \p
+*             stream_block across calls to this function as they will be
+*             updated by this function.
+*
+*             With this strategy, you must not encrypt more than 2**128
+*             blocks of data with the same key.
+*
+*             2. You can encrypt separate messages by dividing the \p
+*             nonce_counter buffer in two areas: the first one used for a
+*             per-message nonce, handled by yourself, and the second one
+*             updated by this function internally.
+*
+*             For example, you might reserve the first 12 bytes for the
+*             per-message nonce, and the last 4 bytes for internal use. In that
+*             case, before calling this function on a new message you need to
+*             set the first 12 bytes of \p nonce_counter to your chosen nonce
+*             value, the last 4 to 0, and \p nc_off to 0 (which will cause \p
+*             stream_block to be ignored). That way, you can encrypt at most
+*             2**96 messages of up to 2**32 blocks each with the same key.
+*
+*             The per-message nonce (or information sufficient to reconstruct
+*             it) needs to be communicated with the ciphertext and must be unique.
+*             The recommended way to ensure uniqueness is to use a message
+*             counter. An alternative is to generate random nonces, but this
+*             limits the number of messages that can be securely encrypted:
+*             for example, with 96-bit random nonces, you should not encrypt
+*             more than 2**32 messages with the same key.
+*
+*             Note that for both stategies, sizes are measured in blocks and
+*             that an AES block is 16 bytes.
+*
+* \warning    Upon return, \p stream_block contains sensitive data. Its
+*             content must not be written to insecure storage and should be
+*             securely discarded as soon as it's no longer needed.
+*
+* \param ctx              The AES context to use for encryption or decryption.
+*                         It must be initialized and bound to a key.
+* \param length           The length of the input data.
+* \param nc_off           The offset in the current \p stream_block, for
+*                         resuming within the current cipher stream. The
+*                         offset pointer should be 0 at the start of a stream.
+*                         It must point to a valid \c size_t.
+* \param nonce_counter    The 128-bit nonce and counter.
+*                         It must be a readable-writeable buffer of \c 16 Bytes.
+* \param stream_block     The saved stream block for resuming. This is
+*                         overwritten by the function.
+*                         It must be a readable-writeable buffer of \c 16 Bytes.
+* \param input            The buffer holding the input data.
+*                         It must be readable and of size \p length Bytes.
+* \param output           The buffer holding the output data.
+*                         It must be writeable and of size \p length Bytes.
+*
+* \return                 \c 0 on success.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_aes_crypt_ctr( mbedtls_aes_context *ctx,
+						 size_t length,
+						 size_t *nc_off,
+						 unsigned char nonce_counter[16],
+						 unsigned char stream_block[16],
+						 const unsigned char *input,
+						 unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CTR */
+
+/**
+* \brief           Internal AES block encryption function. This is only
+*                  exposed to allow overriding it using
+*                  \c MBEDTLS_AES_ENCRYPT_ALT.
+*
+* \param ctx       The AES context to use for encryption.
+* \param input     The plaintext block.
+* \param output    The output (ciphertext) block.
+*
+* \return          \c 0 on success.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_internal_aes_encrypt( mbedtls_aes_context *ctx,
+								const unsigned char input[16],
+								unsigned char output[16] );
+
+/**
+* \brief           Internal AES block decryption function. This is only
+*                  exposed to allow overriding it using see
+*                  \c MBEDTLS_AES_DECRYPT_ALT.
+*
+* \param ctx       The AES context to use for decryption.
+* \param input     The ciphertext block.
+* \param output    The output (plaintext) block.
+*
+* \return          \c 0 on success.
+*/
+MBEDTLS_CHECK_RETURN_TYPICAL
+int mbedtls_internal_aes_decrypt( mbedtls_aes_context *ctx,
+								const unsigned char input[16],
+								unsigned char output[16] );
+
+#if defined(MBEDTLS_SELF_TEST)
+/**
+* \brief          Checkup routine.
+*
+* \return         \c 0 on success.
+* \return         \c 1 on failure.
+*/
+MBEDTLS_CHECK_RETURN_CRITICAL
+int mbedtls_aes_self_test( int verbose );
+
+#endif /* MBEDTLS_SELF_TEST */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* aes.h */

package/src/duckdb/third_party/mbedtls/include/mbedtls/aes_alt.h

@@ -0,0 +1 @@
+// dummy file to make amalgamantion happy