dsh-watcher 0.4.4 → 0.5.1

package/README.en.md

@@ -5,7 +5,7 @@
 Prefer npm (version-pinable):
 
 ```sh
-dsh plugin --profile web add dsh-watcher@0.4.4
+dsh plugin --profile web add dsh-watcher@0.5.1
 ```
 
 Or latest:
@@ -22,7 +22,7 @@ dsh plugin --profile web add github:aa2246740/dsh-watcher
 
 You need official `dsh` (or `npx @deepseek-ai/dsh`) and **pnpm** on `PATH`. `dsh plugin add` runs pnpm in `$DSH_HOME/profiles/web` and, because this package declares `dsh.bundle.patch`, appends the bundle to that profile. Then **restart that Host and reload the page**. The command writes the profile. It does not hot-load a running process.
 
-`lib/` is committed, so npm / git installs do not need a local build, `prepare`, or `allowBuilds`. DeepSeek Harness **0.1.5-rc.2**. Node `^22.19.0` or `>=24`.
+`lib/` is committed, so npm / git installs do not need a local build, `prepare`, or `allowBuilds`. DeepSeek Harness **0.1.5-rc.3** (`@deepseek-ai/dsh@0.1.5-rc.3`). Node `^22.19.0` or `>=24`.
 
 A read-only plugin for DeepSeek Harness Web. Open the eye in the session header. A Session becomes a foldable work path: how many steps ran, how many tools fired, how long it took. Open a step for parallel branches, a tool result, or a reasoning row that stays folded until you ask.
 
@@ -59,14 +59,19 @@ The settings summary and session HUD show **Estimated cost** (not “total value
 
 The interaction contract lives in [DESIGN.md](./DESIGN.md). MIT.
 
-## What's new in 0.4.4
+## What's new in 0.5.1
 
-A round of fixes for the detail column (the left pane you get by opening any record):
+- Targets official DeepSeek Harness **0.1.5-rc.3**. `@deepseek-ai/dsh-*` peers are `^0.1.5-rc.3`, so install accepts `0.1.5-rc.3`.
+- Icons stay `IconChevronRightOutline14`, `IconRefreshOutline14`, `IconCheckOutline16`, and `IconCopyOutline16`. rc.3 still exports those names.
 
-- **It can be closed again.** In the docked layout `返回工作路径` was hidden by CSS, leaving the opened column with no way back.
-- **Closing is a motion, not a removal.** The detail content fades toward the work path first, then the column narrows, so the closing edge never slices a readable line. Opening runs the same beats in reverse.
-- **The panel no longer flicks sideways.** The column's width changes every frame while the panel's own `left` was re-derived a frame late by a resize observer; the measured frame is now pinned for the transition, so only the left edge follows layout.
-- **The header status line stays inside the column.** `对话轮次 … · … 个步骤 · …` used to slip under the work-path card because the docked children laid out wider than their column; they now use `border-box`, and an over-long line wraps.
+## 0.5.0
+
+- **The panel resizes.** Drag the right edge, the bottom edge, or the corner grip; the frame stays put while it grows, and it can never shrink below the size it opened at.
+- **The HUD folds to one line.** A `▾` next to the scope switch collapses the timing panel to just the top bar, and the choice is remembered.
+- **"定位现场" lands on the actual failure.** It now selects the exact failing step and opens the inspector on it instead of scrolling to a bare turn header.
+- **Repeated failures no longer stack.** One failure chain updates one card, and the title names its turn (`第 N 轮`).
+
+Plus the 0.4.5 fixes: the inspector back control no longer re-arms follow, the first range pick no longer rescans sessions, the projection state no longer stores a copy of its own view, and the timing panel's non-terminal slice is labelled correctly.
 
 Older releases: [CHANGELOG.md](./CHANGELOG.md).
 

package/README.md

@@ -5,7 +5,7 @@
 推荐用 npm（可钉版本）：
 
 ```sh
-dsh plugin --profile web add dsh-watcher@0.4.4
+dsh plugin --profile web add dsh-watcher@0.5.1
 ```
 
 也可以装 latest：
@@ -22,7 +22,7 @@ dsh plugin --profile web add github:aa2246740/dsh-watcher
 
 PATH 上需要官方 `dsh`（或 `npx @deepseek-ai/dsh`）和 **pnpm**。`dsh plugin add` 会在 `$DSH_HOME/profiles/web` 里跑 pnpm，并因为本包装了 `dsh.bundle.patch` 而写入 profile bundles。然后**重启这个 Host，再刷新页面**。它只写 profile，不会热挂正在跑的进程。
 
-仓库已提交 `lib/`，npm / git 安装不用再构建，也不走 `prepare` / `allowBuilds`。需要 DeepSeek Harness **0.1.5-rc.2**，Node `^22.19.0` 或 `>=24`。
+仓库已提交 `lib/`，npm / git 安装不用再构建，也不走 `prepare` / `allowBuilds`。需要 DeepSeek Harness **0.1.5-rc.3**（`@deepseek-ai/dsh@0.1.5-rc.3`），Node `^22.19.0` 或 `>=24`。
 
 DeepSeek Harness Web 的只读插件。点会话标题栏里的眼睛，把 Session 收成一张能折叠的工作路径：这轮走了几步、跑了几次、花了多久；再展开某一步看并行分支、工具结果，或一条默认折着的推理记录。
 
@@ -59,14 +59,19 @@ DSH.app 的 `desktop` profile 不接受 `github:`。用 `dsh web` 装进 web pro
 
 交互约定在 [DESIGN.md](./DESIGN.md)。MIT。
 
-## 本次更新（0.4.4）
+## 本次更新（0.5.1）
 
-详情面板（点任意一条记录后出现的左栏）这轮修了一串体验问题：
+- 对齐官方 DeepSeek Harness **0.1.5-rc.3**。`@deepseek-ai/dsh-*` 的 peer 改为 `^0.1.5-rc.3`，安装期能接受 `0.1.5-rc.3`。
+- 图标仍用 `IconChevronRightOutline14`、`IconRefreshOutline14`、`IconCheckOutline16`、`IconCopyOutline16`。rc.3 仍导出这些名字。
 
-- **能收起来了。** 停靠布局下 `返回工作路径` 之前被 CSS 藏了起来，面板展开后无处可退。
-- **收起是一段动效，不是"抽走"。** 详情内容先向右淡出，再收窄整列 —— 关闭边缘扫过时不会切到半行字；展开是反向同一套。
-- **整块面板不再左右闪。** 列宽每帧在变，而面板坐标由观察器重算、晚一帧，右边缘就来回跳；现在动效期间钉住面板外框，只有左边缘随布局移动。
-- **头部状态行不再被盖。** `对话轮次 … · … 个步骤 · …` 之前会钻到右侧卡片底下；子块改为 border-box，过长会自动换行。
+## 0.5.0
+
+- **面板能拖大。** 右边缘、下边缘和右下角把手都能拖；位置全程不动，最小只能缩回打开时的默认尺寸，不会小到放不下内容。
+- **HUD 可折叠成一行。** 范围切换旁多了一个 `▾`，收起只留顶栏统计，选择会被记住。
+- **"定位现场"真的到现场。** 现在会选中告警对应的具体失败步骤、直接打开检视器，而不是只滚到轮次标题。
+- **连续失败不再刷屏。** 同一条失败链更新同一张卡片，标题带上 `第 N 轮`。
+
+外加一串 0.4.5 的修复：检视器返回不再抢跟随、首次选范围不重复扫会话、投影状态不再存一份自身视图、计时面板文案改为"终端以外的工具"。
 
 历史版本见 [CHANGELOG.md](./CHANGELOG.md)。