dsh-stm32 0.1.7 → 0.1.9

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (153) hide show
  1. package/README.md +567 -516
  2. package/README_EN.md +544 -510
  3. package/client/client.js +7033 -682
  4. package/docs/reading-guide.md +921 -859
  5. package/lib/client.js +7033 -682
  6. package/lib/commands/register.js +2 -0
  7. package/lib/data/firmware-packages.js +35 -0
  8. package/lib/data/firmware-pins.js +7 -0
  9. package/lib/data/install-guides.js +110 -0
  10. package/lib/data/ioc-presets.js +118 -0
  11. package/lib/engine/artifacts.js +123 -0
  12. package/lib/engine/breakpoint-hits.js +73 -0
  13. package/lib/engine/build.js +161 -5
  14. package/lib/engine/channel-tap.js +227 -0
  15. package/lib/engine/channels.js +48 -0
  16. package/lib/engine/clocks.js +192 -0
  17. package/lib/engine/datasheet/auto.js +74 -0
  18. package/lib/engine/datasheet/digest.js +74 -0
  19. package/lib/engine/datasheet/lcsc.js +60 -0
  20. package/lib/engine/datasheet/pinout.js +119 -0
  21. package/lib/engine/datasheet/price.js +152 -0
  22. package/lib/engine/datasheet/search.js +147 -0
  23. package/lib/engine/datasheet/store.js +371 -0
  24. package/lib/engine/debug-session.js +48 -2
  25. package/lib/engine/ecad/autobuild.js +156 -0
  26. package/lib/engine/ecad/bom.js +238 -0
  27. package/lib/engine/ecad/brief.js +205 -0
  28. package/lib/engine/ecad/checks.js +239 -0
  29. package/lib/engine/ecad/design.js +177 -0
  30. package/lib/engine/ecad/dfm.js +314 -0
  31. package/lib/engine/ecad/easyeda.js +454 -0
  32. package/lib/engine/ecad/fabrication.js +104 -0
  33. package/lib/engine/ecad/gen/footprint.js +159 -0
  34. package/lib/engine/ecad/gen/symbol.js +103 -0
  35. package/lib/engine/ecad/import.js +372 -0
  36. package/lib/engine/ecad/jlcpcb.js +141 -0
  37. package/lib/engine/ecad/libs.js +316 -0
  38. package/lib/engine/ecad/models3d.js +89 -0
  39. package/lib/engine/ecad/netgate.js +286 -0
  40. package/lib/engine/ecad/normalize.js +182 -0
  41. package/lib/engine/ecad/package.js +126 -0
  42. package/lib/engine/ecad/padmerge.js +128 -0
  43. package/lib/engine/ecad/padprecheck.js +123 -0
  44. package/lib/engine/ecad/part-import.js +257 -0
  45. package/lib/engine/ecad/pcb/apply.js +53 -0
  46. package/lib/engine/ecad/pcb/emc-deep.js +396 -0
  47. package/lib/engine/ecad/pcb/emc.js +275 -0
  48. package/lib/engine/ecad/pcb/geometry.js +63 -0
  49. package/lib/engine/ecad/pcb/gerber.js +499 -0
  50. package/lib/engine/ecad/pcb/hand-sync.js +242 -0
  51. package/lib/engine/ecad/pcb/impedance.js +119 -0
  52. package/lib/engine/ecad/pcb/ipc-open.js +78 -0
  53. package/lib/engine/ecad/pcb/ipc-script.js +276 -0
  54. package/lib/engine/ecad/pcb/ipc.js +129 -0
  55. package/lib/engine/ecad/pcb/krt.js +182 -0
  56. package/lib/engine/ecad/pcb/links.js +393 -0
  57. package/lib/engine/ecad/pcb/mech.js +201 -0
  58. package/lib/engine/ecad/pcb/model-fix.js +178 -0
  59. package/lib/engine/ecad/pcb/netlist.js +146 -0
  60. package/lib/engine/ecad/pcb/pcb-svg.js +199 -0
  61. package/lib/engine/ecad/pcb/placement.js +140 -0
  62. package/lib/engine/ecad/pcb/power.js +203 -0
  63. package/lib/engine/ecad/pcb/render3d.js +208 -0
  64. package/lib/engine/ecad/pcb/route.js +167 -0
  65. package/lib/engine/ecad/pcb/router.js +469 -0
  66. package/lib/engine/ecad/pcb/rules.js +122 -0
  67. package/lib/engine/ecad/pcb/scene.js +513 -0
  68. package/lib/engine/ecad/pcb/stackup.js +154 -0
  69. package/lib/engine/ecad/pcb/swap.js +222 -0
  70. package/lib/engine/ecad/pcb/tracks.js +70 -0
  71. package/lib/engine/ecad/runtime.js +227 -0
  72. package/lib/engine/ecad/toolchain.js +146 -0
  73. package/lib/engine/ecad/tsci.js +362 -0
  74. package/lib/engine/ecad/zip.js +98 -0
  75. package/lib/engine/event-bus.js +158 -0
  76. package/lib/engine/event-log.js +335 -0
  77. package/lib/engine/fault-hints.js +146 -0
  78. package/lib/engine/generate-script.js +4 -1
  79. package/lib/engine/generate.js +145 -5
  80. package/lib/engine/interrupts.js +247 -0
  81. package/lib/engine/ioc-diff.js +369 -0
  82. package/lib/engine/ioc-plan.js +12 -2
  83. package/lib/engine/ioc-sync.js +58 -0
  84. package/lib/engine/mcu-info.js +134 -0
  85. package/lib/engine/msys2-install.js +31 -6
  86. package/lib/engine/panel-actions.js +103 -0
  87. package/lib/engine/pdf/curve.js +321 -0
  88. package/lib/engine/pdf/png.js +83 -0
  89. package/lib/engine/pdf/reader.js +336 -0
  90. package/lib/engine/pdf/schematic.js +93 -0
  91. package/lib/engine/pdf/tables.js +249 -0
  92. package/lib/engine/pdf/toolchain.js +50 -0
  93. package/lib/engine/pinout.js +140 -0
  94. package/lib/engine/probe-info.js +95 -0
  95. package/lib/engine/probe.js +45 -0
  96. package/lib/engine/progress.js +99 -0
  97. package/lib/engine/project-conf.js +254 -0
  98. package/lib/engine/project-layout.js +198 -0
  99. package/lib/engine/project-repair.js +205 -0
  100. package/lib/engine/schematic/checks.js +153 -0
  101. package/lib/engine/schematic/draw.js +390 -0
  102. package/lib/engine/schematic/edit.js +229 -0
  103. package/lib/engine/schematic/kicad-sch.js +225 -0
  104. package/lib/engine/schematic/model.js +442 -0
  105. package/lib/engine/schematic/nets.js +219 -0
  106. package/lib/engine/schematic/pcb.js +144 -0
  107. package/lib/engine/schematic/review.js +134 -0
  108. package/lib/engine/schematic/sexpr.js +134 -0
  109. package/lib/engine/schematic/to-ioc.js +197 -0
  110. package/lib/engine/schematic/transform.js +25 -0
  111. package/lib/engine/session-context.js +106 -0
  112. package/lib/engine/source-slice.js +59 -0
  113. package/lib/engine/tool-events.js +119 -0
  114. package/lib/engine/toolchain-gate.js +8 -0
  115. package/lib/engine/watch-admin.js +101 -0
  116. package/lib/engine/watch-record.js +39 -0
  117. package/lib/engine/watch-recorder.js +116 -0
  118. package/lib/engine/web-api.js +1123 -4
  119. package/lib/engine/web-routes.js +18 -1
  120. package/lib/engine/workspace-memo.js +41 -0
  121. package/lib/index.js +118 -24
  122. package/lib/skill/stm32-workflow.js +1 -1
  123. package/lib/tools/build.js +10 -2
  124. package/lib/tools/code-patch.js +2 -2
  125. package/lib/tools/datasheet.js +447 -0
  126. package/lib/tools/debug-session.js +9 -4
  127. package/lib/tools/debug.js +2 -2
  128. package/lib/tools/doctor.js +2 -2
  129. package/lib/tools/ecad.js +903 -0
  130. package/lib/tools/flash.js +2 -2
  131. package/lib/tools/gen.js +166 -0
  132. package/lib/tools/generate.js +7 -5
  133. package/lib/tools/import-circuit.js +146 -0
  134. package/lib/tools/ioc-apply.js +11 -2
  135. package/lib/tools/ioc-inspect.js +2 -2
  136. package/lib/tools/ioc-plan.js +2 -2
  137. package/lib/tools/ioc-verify.js +2 -2
  138. package/lib/tools/layout.js +92 -0
  139. package/lib/tools/mcu-info.js +163 -0
  140. package/lib/tools/part-import.js +182 -0
  141. package/lib/tools/pcb.js +2316 -0
  142. package/lib/tools/pdf.js +423 -0
  143. package/lib/tools/project-create.js +28 -0
  144. package/lib/tools/project-dir.js +25 -1
  145. package/lib/tools/regs.js +2 -2
  146. package/lib/tools/route-plan.js +2 -2
  147. package/lib/tools/rtt.js +10 -2
  148. package/lib/tools/sch-draw.js +433 -0
  149. package/lib/tools/sch-edit.js +145 -0
  150. package/lib/tools/schematic.js +817 -0
  151. package/lib/tools/serial.js +22 -0
  152. package/lib/tools/watch.js +24 -2
  153. package/package.json +1 -1
@@ -0,0 +1,163 @@
1
+ /**
2
+ * stm32_board_info:把 .ioc 里的事实写成 <工程>/dsh/mcu.json,给别的插件读(S184)。
3
+ * 默认只回事实不落盘;write: true 才写,写完顺手报一次是否与当前 .ioc 同步。
4
+ */
5
+ import { collectMcuInfo, mcuInfoFreshness, mcuInfoPath, readMcuInfo, writeMcuInfo } from "../engine/mcu-info.js";
6
+ import { resolveProjectDir } from "./project-dir.js";
7
+ export const BOARD_INFO_TOOL = "stm32_board_info";
8
+ const infoOutput = {
9
+ type: "object",
10
+ additionalProperties: false,
11
+ properties: {
12
+ ok: { type: "boolean" },
13
+ error: { type: "string" },
14
+ file: { type: "string" },
15
+ written: { type: "boolean" },
16
+ schema: { type: "string" },
17
+ generatedAt: { type: "string" },
18
+ mcu: {
19
+ type: "object",
20
+ additionalProperties: false,
21
+ properties: {
22
+ cpn: { type: "string" },
23
+ name: { type: "string" },
24
+ family: { type: "string" },
25
+ package: { type: "string" },
26
+ },
27
+ required: ["cpn", "name", "family", "package"],
28
+ },
29
+ clock: {
30
+ type: "object",
31
+ additionalProperties: false,
32
+ properties: {
33
+ sysclkHz: { type: "number" },
34
+ ahbHz: { type: "number" },
35
+ apb1Hz: { type: "number" },
36
+ apb2Hz: { type: "number" },
37
+ },
38
+ required: ["sysclkHz", "ahbHz", "apb1Hz", "apb2Hz"],
39
+ },
40
+ debugPins: { type: "array", items: { type: "string" } },
41
+ nvicCount: { type: "number" },
42
+ peripheralCount: { type: "number" },
43
+ pinCount: { type: "number" },
44
+ pins: {
45
+ type: "array",
46
+ items: {
47
+ type: "object",
48
+ additionalProperties: false,
49
+ properties: {
50
+ pin: { type: "string" },
51
+ signal: { type: "string" },
52
+ label: { type: "string" },
53
+ mode: { type: "string" },
54
+ },
55
+ required: ["pin", "signal", "label", "mode"],
56
+ },
57
+ },
58
+ stale: { type: "boolean" },
59
+ staleReason: { type: "string" },
60
+ notes: { type: "array", items: { type: "string" } },
61
+ },
62
+ required: ["ok", "error", "file", "written", "schema", "generatedAt", "mcu", "clock", "debugPins", "nvicCount", "peripheralCount", "pinCount", "pins", "stale", "staleReason", "notes"],
63
+ };
64
+ export function registerMcuInfoTools(ctx) {
65
+ const tool = {
66
+ name: BOARD_INFO_TOOL,
67
+ description: "MCU 事实文件:把 .ioc 里的事实(型号、封装、时钟、调试口、引脚、外设、中断数)写成 <工程>/dsh/mcu.json,给别的插件或脚本读;默认只回事实,`write: true` 才落盘。文件带 .ioc 的 sha256 指纹,改过 .ioc 后要重新生成。",
68
+ parameters: {
69
+ type: "object",
70
+ additionalProperties: false,
71
+ properties: {
72
+ projectDir: { type: "string", description: "工程根目录;缺省为当前调试会话的工程。" },
73
+ write: { type: "boolean", description: "true 才写进 <工程>/dsh/mcu.json;默认只回事实。" },
74
+ file: { type: "string", description: "覆盖输出路径(相对工程根);缺省 dsh/mcu.json。" },
75
+ },
76
+ required: [],
77
+ },
78
+ output: {
79
+ schema: infoOutput,
80
+ render: (_args, value) => {
81
+ const result = value;
82
+ if (!result.ok)
83
+ return [{ type: "text", text: "读不到 MCU 事实:" + result.error }];
84
+ const mhz = (hz) => (hz > 0 ? String(hz / 1_000_000) + " MHz" : "—");
85
+ const lines = [
86
+ (result.written ? "已写入:" : "预览(未写盘):") + result.file,
87
+ result.mcu.cpn + "(" + result.mcu.package + " · " + result.mcu.family + ")· PIN " + String(result.pinCount) + " · 外设 " + String(result.peripheralCount) + " · 中断 " + String(result.nvicCount),
88
+ "时钟 SYSCLK " + mhz(result.clock.sysclkHz) + " / APB1 " + mhz(result.clock.apb1Hz) + " / APB2 " + mhz(result.clock.apb2Hz),
89
+ "调试口:" + (result.debugPins.length > 0 ? result.debugPins.join(" ") : "没有启用"),
90
+ ];
91
+ if (result.stale)
92
+ lines.push("⚠ " + result.staleReason);
93
+ for (const note of result.notes)
94
+ lines.push("说明:" + note);
95
+ return [{ type: "text", text: lines.join("\n") }];
96
+ },
97
+ },
98
+ timeoutMs: 30_000,
99
+ isConcurrencySafe: () => true,
100
+ execute: async (args, exec) => {
101
+ const empty = {
102
+ ok: false,
103
+ error: "",
104
+ file: "",
105
+ written: false,
106
+ schema: "",
107
+ generatedAt: "",
108
+ mcu: { cpn: "", name: "", family: "", package: "" },
109
+ clock: { sysclkHz: 0, ahbHz: 0, apb1Hz: 0, apb2Hz: 0 },
110
+ debugPins: [],
111
+ nvicCount: 0,
112
+ peripheralCount: 0,
113
+ pinCount: 0,
114
+ pins: [],
115
+ stale: false,
116
+ staleReason: "",
117
+ notes: [],
118
+ };
119
+ const resolved = await resolveProjectDir(ctx, args.projectDir, exec);
120
+ if (resolved.projectDir === "")
121
+ return { ...empty, error: "projectDir 不能为空:从工具栏「工程」下拉里选一个,或先打开调试会话" };
122
+ const collected = collectMcuInfo(resolved.projectDir);
123
+ if (!collected.ok || collected.info === null)
124
+ return { ...empty, error: collected.error };
125
+ const info = collected.info;
126
+ const target = args.file === undefined || args.file.trim() === "" ? mcuInfoPath(resolved.projectDir) : (args.file.trim().match(/^[A-Za-z]:/u) ? args.file.trim() : joinPath(resolved.projectDir, args.file.trim()));
127
+ const shouldWrite = args.write === true;
128
+ const written = shouldWrite ? writeMcuInfo(target, info) : { ok: true, error: "" };
129
+ if (!written.ok)
130
+ return { ...empty, error: written.error, file: target };
131
+ const freshness = readMcuInfo(target);
132
+ const stale = freshness.ok && freshness.info !== null ? mcuInfoFreshness(freshness.info, resolved.projectDir) : { stale: false, reason: "" };
133
+ return {
134
+ ok: true,
135
+ error: "",
136
+ file: target,
137
+ written: shouldWrite,
138
+ schema: info.schema,
139
+ generatedAt: info.generatedAt,
140
+ mcu: { ...info.mcu },
141
+ clock: {
142
+ sysclkHz: info.clock.sysclkHz ?? 0,
143
+ ahbHz: info.clock.ahbHz ?? 0,
144
+ apb1Hz: info.clock.apb1Hz ?? 0,
145
+ apb2Hz: info.clock.apb2Hz ?? 0,
146
+ },
147
+ debugPins: [...info.debug.pins],
148
+ nvicCount: info.nvicCount,
149
+ peripheralCount: info.peripherals.length,
150
+ pinCount: info.pins.length,
151
+ pins: info.pins.map((pin) => ({ pin: pin.pin, signal: pin.signal, label: pin.label, mode: pin.mode })),
152
+ stale: stale.stale,
153
+ staleReason: stale.reason,
154
+ notes: [...info.notes],
155
+ };
156
+ },
157
+ };
158
+ ctx.tools.register(tool);
159
+ }
160
+ function joinPath(base, rel) {
161
+ const normalized = rel.replace(/\\/gu, "/");
162
+ return base.replace(/[\\/]+$/u, "") + "/" + normalized;
163
+ }
@@ -0,0 +1,182 @@
1
+ /**
2
+ * S173:器件导入工具。
3
+ *
4
+ * stm32_part_import footprint=Package_SO:SOIC-8_3.9x4.9mm_P1.27mm code=C25137 write=true
5
+ *
6
+ * 把 KiCad 官方库里的封装收进工程自己的库,按焊盘生成符号骨架,并登记两张库表。
7
+ * 立创编号只用来查型号/品牌/手册;查不到不阻断,但会在 notes 里说清楚。
8
+ */
9
+ import { importPart } from "../engine/ecad/part-import.js";
10
+ import { locateEcadToolchain } from "../engine/ecad/toolchain.js";
11
+ import { resolveProjectDir } from "./project-dir.js";
12
+ export const PART_IMPORT_TOOL = "stm32_part_import";
13
+ export function registerPartImportTools(ctx) {
14
+ ctx.tools.register({
15
+ name: PART_IMPORT_TOOL,
16
+ description: "把封装导入工程:优先从 KiCad 官方库复制 .kicad_mod;库里没有但给了立创编号时,从立创页面取封装图形转成 .kicad_mod(source=lcsc 可强制走这条路)。按焊盘生成符号骨架到 hardware/libs/symbols,并登记 fp-lib-table/sym-lib-table。默认只做预先检查,write=true 才写文件。",
17
+ parameters: {
18
+ type: "object",
19
+ additionalProperties: false,
20
+ properties: {
21
+ projectDir: { type: "string", description: "工程根目录;缺省为当前调试会话的工程。" },
22
+ footprint: {
23
+ type: "string",
24
+ description: "源封装,Lib:Name 形式(如 Package_SO:SOIC-8_3.9x4.9mm_P1.27mm);只给 Name 时在库里按名字找。",
25
+ },
26
+ code: { type: "string", description: "立创编号(如 C25137):用来查型号/品牌/手册,也是库里没有封装时的回退来源。" },
27
+ source: {
28
+ type: "string",
29
+ enum: ["auto", "kicad", "lcsc"],
30
+ description: "封装从哪来:auto(默认,先库后立创)/ kicad(只查官方库)/ lcsc(只从立创页面转)。",
31
+ },
32
+ library: { type: "string", description: "收进工程后的库名,默认沿用源库名。" },
33
+ name: { type: "string", description: "收进工程后的封装名与符号名,默认沿用源封装名。" },
34
+ write: { type: "boolean", description: "true 才真的写文件与登记库表;默认只回计划。" },
35
+ },
36
+ required: ["footprint"],
37
+ },
38
+ output: {
39
+ schema: {
40
+ type: "object",
41
+ additionalProperties: false,
42
+ properties: {
43
+ ok: { type: "boolean" },
44
+ error: { type: "string" },
45
+ code: { type: "string" },
46
+ mpn: { type: "string" },
47
+ brand: { type: "string" },
48
+ datasheet: { type: "string" },
49
+ library: { type: "string" },
50
+ footprintName: { type: "string" },
51
+ source: { type: "string" },
52
+ footprintFile: { type: "string" },
53
+ symbolFile: { type: "string" },
54
+ modelFile: { type: "string" },
55
+ modelBytes: { type: "number" },
56
+ padCount: { type: "number" },
57
+ pads: { type: "array", items: { type: "string" } },
58
+ written: { type: "array", items: { type: "string" } },
59
+ notes: { type: "array", items: { type: "string" } },
60
+ },
61
+ required: [
62
+ "ok",
63
+ "error",
64
+ "code",
65
+ "mpn",
66
+ "brand",
67
+ "datasheet",
68
+ "library",
69
+ "footprintName",
70
+ "source",
71
+ "footprintFile",
72
+ "symbolFile",
73
+ "modelFile",
74
+ "modelBytes",
75
+ "padCount",
76
+ "pads",
77
+ "written",
78
+ "notes",
79
+ ],
80
+ },
81
+ render: (_args, value) => {
82
+ const result = value;
83
+ if (!result.ok)
84
+ return [{ type: "text", text: "导入失败:" + result.error }];
85
+ const head = (result.code !== "" ? result.code + " " : "") +
86
+ (result.mpn !== "" ? result.mpn + " " : "") +
87
+ (result.brand !== "" ? "(" + result.brand + ")" : "") +
88
+ "· 封装 " + result.library + ":" + result.footprintName + " · 焊盘 " + String(result.padCount) + " 个";
89
+ const lines = [head.trim()];
90
+ if (result.source.startsWith("easyeda:"))
91
+ lines.push("封装来源:立创页面 " + result.source.slice("easyeda:".length));
92
+ if (result.datasheet !== "")
93
+ lines.push("手册:" + result.datasheet);
94
+ lines.push(result.written.length > 0 ? "已写:" : "将写(还没有落盘):");
95
+ lines.push(" 封装:" + result.footprintFile);
96
+ lines.push(" 符号:" + result.symbolFile);
97
+ lines.push(result.modelFile !== ""
98
+ ? " 3D 模型:" + result.modelFile + "(" + result.modelBytes.toLocaleString("en-US") + " B)"
99
+ : " 3D 模型:没有(封装不引用,或 KiCad 里缺这个文件)");
100
+ for (const file of result.written.slice(2))
101
+ lines.push(" 库表:" + file);
102
+ for (const note of result.notes)
103
+ lines.push("· " + note);
104
+ return [{ type: "text", text: lines.join("\n") }];
105
+ },
106
+ },
107
+ timeoutMs: 60_000,
108
+ isConcurrencySafe: () => true,
109
+ execute: async (args, exec) => {
110
+ const project = await resolveProjectDir(ctx, args.projectDir, exec);
111
+ const projectDir = project.projectDir;
112
+ if (projectDir === "") {
113
+ return {
114
+ ok: false,
115
+ error: "没有工程目录:从工具栏「工程」下拉里选一个,或先打开调试会话。",
116
+ code: "",
117
+ mpn: "",
118
+ brand: "",
119
+ datasheet: "",
120
+ library: "",
121
+ footprintName: "",
122
+ source: "",
123
+ footprintFile: "",
124
+ symbolFile: "",
125
+ modelFile: "",
126
+ modelBytes: 0,
127
+ padCount: 0,
128
+ pads: [],
129
+ written: [],
130
+ notes: [],
131
+ };
132
+ }
133
+ const located = locateEcadToolchain();
134
+ if (!located.ok || located.toolchain === null) {
135
+ return {
136
+ ok: false,
137
+ error: "找不到 KiCad:" + located.error + "(封装来源是 KiCad 官方库,需要先装 KiCad)",
138
+ code: "",
139
+ mpn: "",
140
+ brand: "",
141
+ datasheet: "",
142
+ library: "",
143
+ footprintName: "",
144
+ source: "",
145
+ footprintFile: "",
146
+ symbolFile: "",
147
+ padCount: 0,
148
+ pads: [],
149
+ written: [],
150
+ notes: [],
151
+ };
152
+ }
153
+ const report = await importPart(projectDir, located.toolchain, {
154
+ footprint: (args.footprint ?? "").trim(),
155
+ code: (args.code ?? "").trim(),
156
+ source: args.source ?? "auto",
157
+ library: (args.library ?? "").trim(),
158
+ name: (args.name ?? "").trim(),
159
+ write: args.write === true,
160
+ });
161
+ return {
162
+ ok: report.ok,
163
+ error: report.error,
164
+ code: report.code,
165
+ mpn: report.mpn,
166
+ brand: report.brand,
167
+ datasheet: report.datasheet,
168
+ library: report.footprint?.library ?? "",
169
+ footprintName: report.footprint?.name ?? "",
170
+ source: report.footprint?.source ?? "",
171
+ footprintFile: report.footprint?.file ?? "",
172
+ symbolFile: report.symbol?.file ?? "",
173
+ modelFile: report.model?.file ?? "",
174
+ modelBytes: report.model?.bytes ?? 0,
175
+ padCount: report.pads.length,
176
+ pads: [...report.pads],
177
+ written: [...report.written],
178
+ notes: [...report.notes],
179
+ };
180
+ },
181
+ });
182
+ }