dsh-remote-bridge 2.2.0 → 2.2.1

package/README.en.md

@@ -9,7 +9,7 @@
 </p>
 
 <p align="center">
-  <img alt="Version" src="https://img.shields.io/badge/version-v2.2.0-087f8c">
+  <img alt="Version" src="https://img.shields.io/badge/version-v2.2.1-087f8c">
   <img alt="DSH plugin" src="https://img.shields.io/badge/DeepSeek_Harness-plugin-1f2328">
   <img alt="Platforms" src="https://img.shields.io/badge/platform-Windows%20%7C%20macOS%20%7C%20Linux-586069">
   <img alt="License" src="https://img.shields.io/badge/license-AGPL--3.0-2da44e">
@@ -63,28 +63,37 @@ So seeing `dsh-workspace` in a REST address or the state directory is **expected
 - Node.js `^22.19.0` or `>=24.0.0`
 - Port `3090`, or another available port
 
-Run as the same operating-system user that runs DSH WebUI (pick either host — the tarball is identical):
+Run as the same operating-system user that runs DSH WebUI. **The npm package name is recommended** — all three routes install the same build:
 
 ```sh
-# GitHub
-dsh plugin --profile web add https://github.com/westanke/dsh-remote-bridge/releases/download/v2.2.0/dsh-remote-bridge-2.2.0.tgz
+# 1. npm package name (recommended: a prebuilt tarball, so pnpm never asks to approve a build)
+dsh plugin --profile web add dsh-remote-bridge
 
-# Gitee (faster from mainland China)
+# ...or point at the mainland-China mirror
+dsh plugin --profile web add dsh-remote-bridge --registry https://registry.npmmirror.com
+
+# 2. tarball from the GitHub release
+dsh plugin --profile web add https://github.com/westanke/dsh-remote-bridge/releases/download/v2.2.1/dsh-remote-bridge-2.2.1.tgz
+
+# 3. tarball from the Gitee release (faster from mainland China)
 dsh plugin --profile web add https://gitee.com/westanke/dsh-remote-bridge/releases/download/v2.2.0/dsh-remote-bridge-2.2.0.tgz
 
 npx @deepseek-ai/dsh web
 ```
 
+> `dsh plugin add` is a thin wrapper over `pnpm add`, so pnpm options such as `--registry` work directly.
+>
 > This README is shared verbatim by GitHub and Gitee, so any address that must carry a hostname
 > (the install commands, release downloads) lists both hosts. Relative links follow the site you
-> are reading on, but `/releases/download/...` has no relative form.
+> are reading on, but `/releases/download/...` has no relative form. The npm package name is the
+> same as the GitHub repository, so it reads identically on both hosts.
 
 Restart DSH after installation, then open settings — **Phone settings** sits right below **Phone access**. It is settings-only and does **not** contain the file tree. The in-conversation **Files** tab was removed in 2.0.4. **The desktop no longer offers a UI for browsing or editing files**: the standalone page `/dsh-workspace` was deleted in 2.2.0 — use the phone app, or ask the agent to use its tools in a conversation.
 
 To install a downloaded release archive:
 
 ```sh
-dsh plugin --profile web add ./dsh-remote-bridge-2.2.0.tgz
+dsh plugin --profile web add ./dsh-remote-bridge-2.2.1.tgz
 ```
 
 ## First connection
@@ -299,14 +308,15 @@ pnpm pack
 
 `pnpm check` covers type-checking, documentation consistency, and tests. It currently passes **19 test files / 113 cases**, plus **3 browser-layer cases** (Playwright measuring real computed styles).
 
-`pnpm pack` produces roughly a **0.25 MB** archive: 2.2.0 dropped the standalone page and its editor dependencies and turned source maps off, down from 1.72 MB.
+`npm pack` produces roughly a **0.25 MB** archive: 2.2.0 dropped the standalone page and its editor dependencies and turned source maps off, down from 1.72 MB.
 
-v2.2.0 was developed against DSH `master@47f943859bef60e4160492346772ded9b24f765a`. CI covers Windows, Ubuntu, and macOS.
+v2.2.1 was developed against DSH `master@47f943859bef60e4160492346772ded9b24f765a`. CI covers Windows, Ubuntu, and macOS.
 
 ## Project
 
-- Version: `v2.2.0`
+- Version: `v2.2.1`
 - Author: upstream [Hakunm](https://github.com/Hakunm); this fork maintained by [westanke](https://github.com/westanke)
 - Repository: [GitHub](https://github.com/westanke/dsh-remote-bridge) · [Gitee](https://gitee.com/westanke/dsh-remote-bridge)
+- npm: [`dsh-remote-bridge`](https://www.npmjs.com/package/dsh-remote-bridge) ([mainland-China mirror](https://registry.npmmirror.com/dsh-remote-bridge))
 - License: [GNU Affero General Public License v3.0](./LICENSE)
 - Android client: dsh-companion ([GitHub](https://github.com/westanke/dsh-companion) · [Gitee](https://gitee.com/westanke/dsh-companion)), a fork of the upstream [dsh-android-app](https://github.com/Hakunm/dsh-android-app), kept in step with this plugin

package/README.md

@@ -9,7 +9,7 @@
 </p>
 
 <p align="center">
-  <img alt="Version" src="https://img.shields.io/badge/version-v2.2.0-087f8c">
+  <img alt="Version" src="https://img.shields.io/badge/version-v2.2.1-087f8c">
   <img alt="DSH plugin" src="https://img.shields.io/badge/DeepSeek_Harness-plugin-1f2328">
   <img alt="Platforms" src="https://img.shields.io/badge/platform-Windows%20%7C%20macOS%20%7C%20Linux-586069">
   <img alt="License" src="https://img.shields.io/badge/license-AGPL--3.0-2da44e">
@@ -62,27 +62,36 @@
 - Node.js `^22.19.0` 或 `>=24.0.0`
 - 默认端口 `3090` 可用，或准备一个其他端口
 
-使用运行 DSH WebUI 的同一系统用户执行（两站任选其一，内容相同）：
+使用运行 DSH WebUI 的同一系统用户执行。**推荐用 npm 包名**（三种方式装的是同一份产物）：
 
 ```sh
-# GitHub
-dsh plugin --profile web add https://github.com/westanke/dsh-remote-bridge/releases/download/v2.2.0/dsh-remote-bridge-2.2.0.tgz
+# ① npm 包名（推荐：装的是预构建产物，不需要 pnpm 的构建授权）
+dsh plugin --profile web add dsh-remote-bridge
 
-# Gitee（国内访问更快）
+# 国内镜像更快时，指定 registry
+dsh plugin --profile web add dsh-remote-bridge --registry https://registry.npmmirror.com
+
+# ② GitHub Release 的 tarball
+dsh plugin --profile web add https://github.com/westanke/dsh-remote-bridge/releases/download/v2.2.1/dsh-remote-bridge-2.2.1.tgz
+
+# ③ Gitee Release 的 tarball（国内访问更快）
 dsh plugin --profile web add https://gitee.com/westanke/dsh-remote-bridge/releases/download/v2.2.0/dsh-remote-bridge-2.2.0.tgz
 
 npx @deepseek-ai/dsh web
 ```
 
+> `dsh plugin add` 底层就是 `pnpm add`，因此 `--registry` 等 pnpm 选项可直接使用。
+>
 > 本 README 由 GitHub 与 Gitee 共用同一份文件，因此凡是必须带主机名的地址（安装命令、Release 下载）
 > 都会把两站都列出来 —— 相对链接可以跟着站点走，但 `/releases/download/...` 没有相对形式。
+> npm 包名与 GitHub 上的仓库同名，两站看到的都一样。
 
 重启 DSH 后，打开设置就能看到「手机设置」（在「手机访问」下面）。它是**纯设置**，不含文件树；会话视图中工具轨迹旁的「文件」标签页已在 2.0.4 移除。**桌面端不再有浏览或编辑文件的界面**：独立页 `/dsh-workspace` 已在 2.2.0 删除，文件操作请走手机 App，或在会话里让 agent 用工具完成。
 
 从 GitHub Release 下载离线安装包时，可直接安装 tarball：
 
 ```sh
-dsh plugin --profile web add ./dsh-remote-bridge-2.2.0.tgz
+dsh plugin --profile web add ./dsh-remote-bridge-2.2.1.tgz
 ```
 
 ## 第一次使用
@@ -296,14 +305,15 @@ pnpm pack
 
 `pnpm check` 覆盖类型检查、文档一致性与测试；当前 **19 个测试文件 / 113 个用例**，外加 **3 个浏览器层用例**（Playwright 实测量出的计算样式），全部通过。
 
-`pnpm pack` 的产物约 **0.25 MB**：2.2.0 删除独立页及其编辑器依赖、并关闭 source map 之后，从 1.72 MB 降下来。
+`npm pack` 的产物约 **0.25 MB**：2.2.0 删除独立页及其编辑器依赖、并关闭 source map 之后，从 1.72 MB 降下来。
 
-v2.2.0 基于 DSH `master@47f943859bef60e4160492346772ded9b24f765a` 开发，CI 覆盖 Windows、Ubuntu 和 macOS。
+v2.2.1 基于 DSH `master@47f943859bef60e4160492346772ded9b24f765a` 开发，CI 覆盖 Windows、Ubuntu 和 macOS。
 
 ## 项目信息
 
-- 当前版本：`v2.2.0`
+- 当前版本：`v2.2.1`
 - 作者：上游 [Hakunm](https://github.com/Hakunm)，本 fork 维护 [westanke](https://github.com/westanke)
 - 仓库：[GitHub](https://github.com/westanke/dsh-remote-bridge) · [Gitee](https://gitee.com/westanke/dsh-remote-bridge)
+- npm：[`dsh-remote-bridge`](https://www.npmjs.com/package/dsh-remote-bridge)（[国内镜像](https://registry.npmmirror.com/dsh-remote-bridge)）
 - 许可证：[GNU Affero General Public License v3.0](./LICENSE)
 - Android 客户端：dsh-companion（[GitHub](https://github.com/westanke/dsh-companion) · [Gitee](https://gitee.com/westanke/dsh-companion)），上游 [dsh-android-app](https://github.com/Hakunm/dsh-android-app) 的 fork，与本插件配套

package/docs/api/asyncapi.yaml

@@ -1,7 +1,7 @@
 asyncapi: 3.0.0
 info:
   title: DeepSeek Harness Mobile Events
-  version: 2.2.0
+  version: 2.2.1
   description: Live file and authorized DSH chat events. Reconnect clients must refresh REST state; unbounded replay is not provided.
 servers:
   local:

package/docs/api/openapi.yaml

@@ -1,7 +1,7 @@
 openapi: 3.1.0
 info:
   title: DeepSeek Harness Mobile API
-  version: 2.2.0
+  version: 2.2.1
   description: Versioned file and chat BFF for mobile and third-party DSH clients. HTTP and HTTPS are both supported.
 servers:
   - url: http://127.0.0.1:3090/api/v1
@@ -24,7 +24,7 @@ paths:
                 properties:
                   ok: { type: boolean, const: true }
                   version: { type: string, const: v1 }
-                  pluginVersion: { type: string, const: 2.2.0 }
+                  pluginVersion: { type: string, const: 2.2.1 }
   /pairings/exchange:
     post:
       security: []

package/kotlin-sdk/build.gradle.kts

@@ -4,7 +4,7 @@ plugins {
 }
 
 group = "ai.deepseek.dsh"
-version = "2.2.0"
+version = "2.2.1"
 
 repositories { mavenCentral() }
 

package/lib/index.js

@@ -2408,7 +2408,7 @@ async function inspectResolvedPath(root, wirePath) {
 }
 //#endregion
 //#region src/shared/version.ts
-const PLUGIN_VERSION = "2.2.0";
+const PLUGIN_VERSION = "2.2.1";
 //#endregion
 //#region src/host/router.ts
 var ApiRouter = class {

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "dsh-remote-bridge",
-  "version": "2.2.0",
+  "version": "2.2.1",
   "description": "Versioned REST bridge for DeepSeek Harness: remote access for trusted clients (chat, files, devices) plus a Phone-settings panel inside the DSH WebUI.",
   "type": "module",
   "packageManager": "pnpm@11.19.0",