dsh-recall-plugin 2.4.13 → 2.4.14

package/CHANGELOG.md

@@ -2,6 +2,24 @@
 
 本文件格式遵循 [Keep a Changelog](https://keepachangelog.com/zh-CN/1.1.0/)，版本号遵循语义化版本。
 
+## [2.4.14] - 2026-10-18
+
+### 修复
+
+- **启动后单核 CPU 打满、进程表出现数十个 pwsh（issue #24）——三重根因一并修复**：① 启动预热对每个工作区并发跑一条命令链（7 工作区 × 6~8 条命令 ≈ 40~56 个 pwsh 冷启动），而每个恢复会话的 `init` 端点还会再跑一遍同款链；② 快照只有单文件上限（原 100MB），挡不住「大量小文件」——报告者的下载目录工作区 321 个 ≤100MB 文件合计 1.05GB 全部进快照；③ 快照的 `add -A` 无总量上限、无扫描时间预算。
+- **预热与 init 共用根就绪链（in-flight 去重）+ 预热并发限流 2 路**：同一工作区在本进程内只跑一次 `resolveStore/ensureGit/loadIndex/rebuildOrphans/recover`，多工作区预热不再同时起数十条 pwsh。
+- **快照前置护栏：总量上限 + 扫描时间预算**：脚本在 `add -A` **之前**遍历工作区统计「实际会进快照的文件总量」（只计 ≤`maxFileBytes` 的文件，防单个大视频误判）与耗时，超过 `maxWorkspaceBytes`（默认 256MB）或 `scanBudgetMs`（默认 10s）即输出 `SNAP_LIMIT` 并**停用本次快照**——只停用不截断：截断快照回退时会按 index 清单误删未纳入的文件。Host 侧解析标记后短路该工作区后续快照（配置变化或 10 分钟 TTL 自动重试），并在最近消息上提示可行动的恢复方式（调大上限 / 补充排除表）。
+- **单文件上限默认 100MB → 8MB**（`maxFileBytes`）：与总量护栏配合，避免大文件首拍把对象库撑到 GB 级；含素材/模型的正常项目可按需调高。
+
+### 新增
+
+- 配置项 `maxWorkspaceBytes`（默认 256MB）与 `scanBudgetMs`（默认 10s），0 = 不限制；设置页「插件配置」卡片可直接修改（热生效）。负数按非法回退默认——显式关闭只认 0。
+- `snapFeedback.kind` 新增 `workspaceLimit`：`snapshot-info` 对停用的工作区下发可行动文案（客户端 toast 直显）。
+
+### 文档
+
+- README 双语配置表补两项新字段与 8MB 默认值；AGENTS.md 核心机制补护栏语义；`cordis.patch.yml` 默认配置同步。
+
 ## [2.4.13] - 2026-10-17
 
 ### 兼容

package/README.en.md

@@ -27,7 +27,7 @@ As each message is sent, the workspace is first snapshotted into an independent
 - [Snapshot Maintenance & Cleanup](#snapshot-maintenance--cleanup)
 - [How It Works](#how-it-works)
 - [Event Contract (for same-host plugins)](#event-contract-for-same-host-plugins)
-- [Local Development (without publishing)](#local-development-without-publishing)
+- [Contributing](#contributing)
 - [License](#license)
 
 ## UI Preview
@@ -137,7 +137,9 @@ All options can be edited visually in the "**Settings → Plugin Config → Reca
 | --- | --- | --- |
 | `gcSnaps` | 50 | Run `git gc` after this many snapshots accumulate (env `DSH_RECALL_GC_SNAPS` force-overrides) |
 | `gcHours` | 24 | Run gc when this many hours have passed since the last one (whichever trigger fires first; env `DSH_RECALL_GC_HOURS`) |
-| `maxFileBytes` | 104857600 (100MB) | Files larger than this are neither snapshotted nor touched by recalls |
+| `maxFileBytes` | 8388608 (8MB) | Files larger than this are neither snapshotted nor touched by recalls |
+| `maxWorkspaceBytes` | 268435456 (256MB) | Total snapshot-eligible file size per workspace. Exceeding it **disables snapshots for that workspace** (no truncation — a truncated snapshot would make rollback delete the skipped files) and shows a notice on recent messages; raise the limit or add exclusions to recover automatically. 0 = unlimited |
+| `scanBudgetMs` | 10000 (10s) | Time budget for the pre-snapshot file scan. Exceeding it skips the snapshot with a notice (guards against pathological directories stalling startup). 0 = unlimited |
 | `maxSnapshotsPerWorkspace` | 500 | Maximum snapshots kept per workspace; oldest pruned beyond the cap. 0 = unlimited |
 | `retentionDays` | 0 | Keep snapshots for this many days; older ones are deleted. 0 = disabled (works independently of the cap) |
 | `baseExcludes` | `.git`, `node_modules/`, `.dsh-recall-snapshots/`, `dsh-recall-snapshots/`, `target/`, `dist/`, `build/`, `out/`, `coverage/`, `.next/`, `.nuxt/`, `.output/`, `.cache/`, `.gradle/`, `*.exe`, `*.dll`, `*.pdb`, `*.so`, `*.dylib`, `*.msi`, `*.zip`, `*.7z`, `*.rar`, `*.tar`, `*.tar.gz`, `*.iso` | Base exclusion list (gitignore syntax, lower priority than exclude.txt); excluded large directories are skipped as whole subtrees during snapshot scans. Directory-form entries (e.g. `target/`) mean one more thing: **when a path segment of the workspace root itself matches, snapshots are disabled for that workspace** — patterns are relative to the root, so they can never exclude the root itself (i.e. a session opened inside a build-output directory), and such directories have no rollback value anyway; remove the entry to re-enable |
@@ -245,9 +247,26 @@ Versioning: shipped as a stable public contract from day one (not experimental).
 
 Version skew: an old plugin frontend (<2.4.8) never reports, so events never fire; a new frontend with an old host (<2.4.8) gets a missing endpoint and silently ignores it — recall itself is unaffected.
 
-## Local Development (without publishing)
+## Contributing
 
-Point the profile's dependency for this package at your clone via `link:`; DSH loads the built `lib/` artifacts from the workspace (source lives in `src/`), so run `npm run build` after editing `src/`, then restart DSH — no copying or publishing needed:
+### Prerequisites
+
+- Node.js ≥ 20 (develop on Windows, Linux or macOS), git CLI;
+- A local DSH installation (≥ 0.1.2-alpha.1): `npm run test:probe` and `npm run verify:host` need a real dsh; without one the probes skip themselves, which does not block the rest of development and testing.
+
+### Local iteration (no publishing needed)
+
+Clone and build once first (peer dependencies are private `@deepseek-ai/*` packages; `--legacy-peer-deps` skips them and installs only devDependencies — the build and test toolchain):
+
+```powershell
+git clone https://github.com/limbo947/dsh-recall-plugin.git
+cd dsh-recall-plugin
+npm install --legacy-peer-deps   # install the build/test toolchain (esbuild, vitest, typescript, ...)
+npm run build                    # produce the lib/ artifacts (what link mode loads)
+npm test                         # optional: run the unit suite once to verify the baseline
+```
+
+Then point the profile's dependency for this package at your clone via `link:`; DSH loads the built `lib/` artifacts from the workspace (source lives in `src/`), so run `npm run build` after editing `src/`, then restart DSH — no copying or publishing needed:
 
 ```powershell
 # 1. Edit $env:USERPROFILE\.dsh\profiles\web\package.json:
@@ -259,17 +278,27 @@ pnpm install
 # 3. Restart DSH and hard-refresh the page (Ctrl+Shift+R)
 ```
 
-Note: all source lives in `src/` (host in `src/host/`, browser side in `src/client/`, shared types in `src/types/`); `lib/` is a pure build-output directory — `npm run build` generates it via esbuild (per-file host transpilation plus the `lib/client.js` bundle), and the artifacts are committed with the source. **You must run `npm run build` after changing any `src/` file**, otherwise the stale artifacts keep running (CI enforces artifact freshness).
+### Source layout & build
+
+All source lives in `src/`: the host (Node ESM TypeScript) in `src/host/`, the browser side in `src/client/`, cross-domain shared types in `src/types/`; `lib/` is a pure build-output directory — `npm run build` generates it via esbuild (per-file host transpilation plus the `lib/client.js` bundle), and the artifacts are committed with the source. **You must run `npm run build` after changing any `src/` file**, otherwise the stale artifacts keep running (CI enforces artifact freshness).
 
 ### Tests
 
-- `npm test`: pure-logic unit tests (vitest, 39 files / 497 cases, no DSH dependency, runs identically in CI and locally) — config parsing, snapshot parsers, rescue orchestration, error classification, the disk-format guard, the recall intent journal, recall terminal-event payload assembly, i18n dictionaries plus a missing-key scan, script-template same-name-export contract, shell execution dual-channel split and failure grading, settings bridge across both generations, client pure functions, published-package layout, snapshot index persistence, storage caps and retention, etc.;
-- `npm run test:client`: client component tests (vitest + jsdom, 6 files / 90 cases, runs in CI) — the recall node main chain (preview→execute→fork→refill) and terminal-event reporting, snapshot-manager tree and delete flows, config/exclude card error paths, the logger switch matrix, and the zh/en rendering chains; assertions pin behaviour and structure only (className / aria / request payloads), never literal copy;
-- `npm run test:probe`: official-API field probes (requires a local dsh installation; **must run after any dsh upgrade**) — pins fields like `renderMessageImages`/`node`/`cwd`, `atSeq`/`increaseTitle` and the fork-cut anchors of `sessions.fork`, `listSessions` record shape, `AgentRegistry`, the shell execution seam (`execute`/`ShellExecution.result`), the settings surface (`SettingsForms`/profile entry id/volatile gate) plus `loader/volatile-update` and the `Fiber.entry` shape, and goes red on violation;
+- `npm test`: pure-logic unit tests (vitest, 39 files / 505 cases, no DSH dependency, runs identically in CI and locally) — config parsing, snapshot parsers, rescue orchestration, error classification, the disk-format guard, the recall intent journal, recall terminal-event payload assembly, i18n dictionaries plus a missing-key scan, script-template same-name-export contract, shell execution dual-channel split and failure grading, settings bridge across both generations, client pure functions, published-package layout, snapshot index persistence, storage caps and retention, etc.;
+- `npm run test:client`: client component tests (vitest + jsdom, 6 files / 96 cases, runs in CI) — the recall node main chain (preview→execute→fork→refill) and terminal-event reporting, snapshot-manager tree and delete flows, config/exclude card error paths, the logger switch matrix, and the zh/en rendering chains; assertions pin behaviour and structure only (className / aria / request payloads), never literal copy;
+- `npm run test:probe`: official-API field probes (2 files / 54 cases, requires a local dsh installation; **must run after any dsh upgrade**) — pins fields like `renderMessageImages`/`node`/`cwd`, `atSeq`/`increaseTitle` and the fork-cut anchors of `sessions.fork`, `listSessions` record shape, `AgentRegistry`, the shell execution seam (`execute`/`ShellExecution.result`), the settings surface (`SettingsForms`/profile entry id/volatile gate) plus `loader/volatile-update` and the `Fiber.entry` shape, and goes red on violation;
 - `npm run verify:host`: assembly gate (requires a local dsh installation) — boots the plugin with a real cordis context in two passes (legacy settings stub and a modern-face-only stub), asserting inject declarations, endpoint registration, Config schema, teardown cleanliness and settings-face dispatch, catching assembly regressions before release;
-- `npm run build`: full host+client build (mandatory after any `src/` change); `npm run check:dsh`: dsh version inspection (pre-release).
+- `npm run typecheck`: full `tsc --noEmit` type check (includes the `tests/types` compile-time contract assertions; CI runs it before the unit suite);
+- `npm run build`: full host+client build (mandatory after any `src/` change); `npm run check:dsh`: dsh version inspection (pre-release); `npm run check:upgrade`: one-shot dsh-upgrade verification gate (chains check:dsh + test:probe + verify:host; mandatory after a dsh upgrade).
 - CI (GitHub Actions) runs `npm ci --legacy-peer-deps` + `npm run typecheck` + `npm test` + `npm run test:client` + unified artifact-freshness check (`npm run build && git diff --exit-code lib/`; probes and the assembly gate only run on machines with dsh).
 
+### Commit conventions (summary)
+
+- Commit messages follow Conventional Commits (`feat:` / `fix:` / `docs:` / `test:` / `ci:` / `chore:` prefixes with a concise subject); fixes bump patch, new features bump minor;
+- Behaviour changes must be reflected in [CHANGELOG.md](CHANGELOG.md) (Keep a Changelog format) and in both README languages ([中文](README.md) / [English](README.en.md));
+- When assumptions about dsh's official API fields change, update the [docs/compat-audit.md](docs/compat-audit.md) ledger;
+- For the full architecture map, development workflow, official-docs compliance checklist and known pitfalls see [AGENTS.md](AGENTS.md) — the project operations manual for AI coding agents and deep maintainers.
+
 ## License
 
 MIT

package/README.md

@@ -24,7 +24,7 @@
 - [快照维护与清理](#快照维护与清理)
 - [工作原理](#工作原理)
 - [事件契约（供同宿主插件监听）](#事件契约供同宿主插件监听)
-- [本地开发（无需发布）](#本地开发无需发布)
+- [参与贡献](#参与贡献)
 - [License](#license)
 
 ## 界面预览
@@ -134,7 +134,9 @@ peerDependencies 按 minor 版本线开窗，与 `dsh.compatibility.dshReleases`
 | --- | --- | --- |
 | `gcSnaps` | 50 | 每积累多少条快照触发一次 `git gc`（env `DSH_RECALL_GC_SNAPS` 可强制覆盖） |
 | `gcHours` | 24 | 距上次 gc 超过多少小时触发（与条数先到先触发；env `DSH_RECALL_GC_HOURS`） |
-| `maxFileBytes` | 104857600（100MB） | 超过该大小的文件不进快照、不被回退触碰 |
+| `maxFileBytes` | 8388608（8MB） | 超过该大小的文件不进快照、不被回退触碰 |
+| `maxWorkspaceBytes` | 268435456（256MB） | 单工作区可纳入快照的文件总量上限。超过时**停用该工作区快照**（不截断——截断快照回退时会误删未纳入的文件），并在最近消息上提示；调大该值或补充排除表后自动恢复；0 = 不限制 |
+| `scanBudgetMs` | 10000（10 秒） | 快照前的文件扫描时间预算。超过时停用本次快照并提示（防病态大目录拖死启动）；0 = 不限制 |
 | `maxSnapshotsPerWorkspace` | 500 | 每个工作区保留的最大快照数，超限自动删除最旧的；0 = 不限制 |
 | `retentionDays` | 0 | 按天数保留快照，超期自动删除；0 = 不启用（与条数上限各自独立生效） |
 | `baseExcludes` | `.git`、`node_modules/`、`.dsh-recall-snapshots/`、`dsh-recall-snapshots/`、`target/`、`dist/`、`build/`、`out/`、`coverage/`、`.next/`、`.nuxt/`、`.output/`、`.cache/`、`.gradle/`、`*.exe`、`*.dll`、`*.pdb`、`*.so`、`*.dylib`、`*.msi`、`*.zip`、`*.7z`、`*.rar`、`*.tar`、`*.tar.gz`、`*.iso` | 基础排除表（gitignore 语法，优先级低于 exclude.txt）；被排除的大目录整棵子树不进快照扫描。其中「目录形态」项（如 `target/`）另有一层含义：**工作区根自身的路径段命中时，该工作区不启用快照**——在构建产物目录里开会话时排除表本来就管不到它自己（模式是相对该 root 的），这类目录也没有回退价值；删掉对应项即恢复 |
@@ -242,9 +244,26 @@ ctx.on('dsh-recall/failed', (e) => {
 
 版本错位：旧版插件前端（<2.4.8）不上报、事件永不触发；新版前端 + 旧版 host（<2.4.8）时上报端点不存在，前端静默忽略，撤回功能不受任何影响。
 
-## 本地开发（无需发布）
+## 参与贡献
 
-把 profile 对本包的依赖改成 `link:` 指向克隆目录；DSH 加载的是工作区 `lib/` 构建产物（源码在 `src/`），改 `src/` 后先 `npm run build` 再重启 DSH 生效，无需复制或发布：
+### 环境要求
+
+- Node.js ≥ 20（Windows / Linux / macOS 均可开发），git CLI；
+- 本机安装 DSH（≥ 0.1.2-alpha.1）：`npm run test:probe` 与 `npm run verify:host` 依赖真实 dsh 安装；没有 dsh 时探针自动跳过，不阻塞其余开发与测试。
+
+### 本地联调（无需发布）
+
+先克隆并构建一次（peer 依赖是私有 `@deepseek-ai/*` 包，`--legacy-peer-deps` 跳过、只装 devDependencies——构建与测试工具链齐备）：
+
+```powershell
+git clone https://github.com/limbo947/dsh-recall-plugin.git
+cd dsh-recall-plugin
+npm install --legacy-peer-deps   # 安装构建/测试工具链（esbuild、vitest、typescript 等）
+npm run build                    # 生成 lib/ 产物（link 模式加载的就是它）
+npm test                         # 可选：跑一遍单测验证基线
+```
+
+再把 profile 对本包的依赖改成 `link:` 指向克隆目录；DSH 加载的是工作区 `lib/` 构建产物（源码在 `src/`），改 `src/` 后先 `npm run build` 再重启 DSH 生效，无需复制或发布：
 
 ```powershell
 # 1. 编辑 $env:USERPROFILE\.dsh\profiles\web\package.json：
@@ -256,17 +275,27 @@ pnpm install
 # 3. 重启 DSH + 硬刷新页面（Ctrl+Shift+R）
 ```
 
-注意：全部源码在 `src/`（Host 在 `src/host/`、浏览器端在 `src/client/`、共享类型在 `src/types/`），`lib/` 是纯构建产物目录——`npm run build` 经 esbuild 生成（逐文件转译 host 产物 + 打包 `lib/client.js`），产物随源码提交。**改任何 `src/` 后必须跑 `npm run build`**，否则运行的是旧产物（CI 有产物新鲜度统一校验）。
+### 源码结构与构建
+
+全部源码在 `src/`：Host（Node ESM TypeScript）在 `src/host/`、浏览器端在 `src/client/`、跨域共享类型在 `src/types/`；`lib/` 是纯构建产物目录——`npm run build` 经 esbuild 生成（逐文件转译 host 产物 + 打包 `lib/client.js`），产物随源码提交。**改任何 `src/` 后必须跑 `npm run build`**，否则运行的是旧产物（CI 有产物新鲜度统一校验）。
 
 ### 测试
 
-- `npm test`：纯逻辑单测（vitest，39 个文件 497 例，无 DSH 依赖，CI 与本地同跑）——配置解析、快照解析器、救援编排、错误分类、磁盘格式守卫、操作意图 journal、撤回终态事件上报组装、i18n 词典与 key 漏配扫描、脚本模板同名导出契约、执行通道双分支与失败分级、settings 双代桥接、客户端纯函数、发布包内容布局、快照索引持久化、存储上限与保留天数等；
-- `npm run test:client`：client 组件测试（vitest + jsdom，6 个文件 90 例，CI 同跑）——撤回节点主链（preview→execute→fork→回填）与终态事件上报、快照管理树与删除流、配置/排除卡片错误路径、logger 开关矩阵、zh/en 双语渲染链；断言只锁行为与结构（className / aria / 请求载荷），不锁文案字面量；
-- `npm run test:probe`：官方 API 字段探针（依赖本机 dsh 安装；dsh 升级后本地必跑）——钉住 `renderMessageImages`/`node`/`cwd`、`sessions.fork` 的 `atSeq`/`increaseTitle` 与切点锚点、`listSessions` 记录结构、`AgentRegistry`、shell 执行接缝（`execute`/`ShellExecution.result`）、settings 面（`SettingsForms`/profile 条目 id/volatile 门槛）与 `loader/volatile-update`/`Fiber.entry` 形状等字段，违反即红；
+- `npm test`：纯逻辑单测（vitest，39 个文件 505 例，无 DSH 依赖，CI 与本地同跑）——配置解析、快照解析器、救援编排、错误分类、磁盘格式守卫、操作意图 journal、撤回终态事件上报组装、i18n 词典与 key 漏配扫描、脚本模板同名导出契约、执行通道双分支与失败分级、settings 双代桥接、客户端纯函数、发布包内容布局、快照索引持久化、存储上限与保留天数等；
+- `npm run test:client`：client 组件测试（vitest + jsdom，6 个文件 96 例，CI 同跑）——撤回节点主链（preview→execute→fork→回填）与终态事件上报、快照管理树与删除流、配置/排除卡片错误路径、logger 开关矩阵、zh/en 双语渲染链；断言只锁行为与结构（className / aria / 请求载荷），不锁文案字面量；
+- `npm run test:probe`：官方 API 字段探针（2 个文件 54 例，依赖本机 dsh 安装；dsh 升级后本地必跑）——钉住 `renderMessageImages`/`node`/`cwd`、`sessions.fork` 的 `atSeq`/`increaseTitle` 与切点锚点、`listSessions` 记录结构、`AgentRegistry`、shell 执行接缝（`execute`/`ShellExecution.result`）、settings 面（`SettingsForms`/profile 条目 id/volatile 门槛）与 `loader/volatile-update`/`Fiber.entry` 形状等字段，违反即红；
 - `npm run verify:host`：装配门禁（依赖本机 dsh 安装）——用真实 cordis 起插件跑两个 pass（旧面桩 + 只给新面的桩），断言 inject 声明、端点注册、Config schema、卸载清理与 settings 面分派，装配回归发版前即可拦截；
-- `npm run build`：host+client 全量打包（改任何 `src/` 后必跑）；`npm run check:dsh`：dsh 版本巡检（发布前）。
+- `npm run typecheck`：`tsc --noEmit` 全量类型检查（含 `tests/types` 编译期契约断言，CI 中置于单测之前）；
+- `npm run build`：host+client 全量打包（改任何 `src/` 后必跑）；`npm run check:dsh`：dsh 版本巡检（发布前）；`npm run check:upgrade`：dsh 升级一键核验门禁（串联 check:dsh + test:probe + verify:host，dsh 升级后必跑）。
 - CI（GitHub Actions）跑 `npm ci --legacy-peer-deps` + `npm run typecheck` + `npm test` + `npm run test:client` + 产物新鲜度统一校验（`npm run build && git diff --exit-code lib/`；探针与装配门禁只在有 dsh 的机器跑）。
 
+### 提交规范（摘要）
+
+- 提交信息遵循 Conventional Commits（`feat:` / `fix:` / `docs:` / `test:` / `ci:` / `chore:` 前缀 + 中文摘要）；修复 bump patch、新功能 bump minor；
+- 行为变更同步更新 [CHANGELOG.md](CHANGELOG.md)（Keep a Changelog 格式）与 README 双语（[中文](README.md) / [English](README.en.md)）；
+- 对 dsh 官方 API 的字段假设发生变化时，同步 [docs/compat-audit.md](docs/compat-audit.md) 台账；
+- 完整的架构地图、开发流程、官方文档合规清单与已知坑见 [AGENTS.md](AGENTS.md)——面向 AI 编码代理与深度维护者的项目操作手册。
+
 ## License
 
 MIT

package/cordis.patch.yml

@@ -15,7 +15,9 @@
       config:
         gcSnaps: 50            # 每积累多少条快照触发一次 git gc
         gcHours: 24            # 距上次 gc 超过多少小时触发（与条数先到先触发）
-        maxFileBytes: 104857600  # 超过该大小的文件不进快照、不被回退触碰
+        maxFileBytes: 8388608  # 超过该大小的文件不进快照、不被回退触碰
+        maxWorkspaceBytes: 268435456  # 单工作区可纳入快照的文件总量上限，超过即停用该工作区快照；0 = 不限制
+        scanBudgetMs: 10000    # 快照前扫描的时间预算（毫秒），超时即停用本次快照；0 = 不限制
         refillDraft: true      # 撤回后把被撤回的消息文本回填到输入框
         # baseExcludes 默认不在此列出：默认表随插件 schema 下发，在设置页
         # 「基础排除表」增删即可。若要在这里覆盖，必须重述完整表——patch 按行

package/lib/client.js

@@ -464,6 +464,12 @@
     "config.maxFileBytes.label": "\u6587\u4EF6\u5927\u5C0F\u4E0A\u9650",
     "config.maxFileBytes.hint": "\u8D85\u8FC7\u8BE5\u5927\u5C0F\u7684\u6587\u4EF6\u4E0D\u8FDB\u5FEB\u7167\u3001\u4E0D\u88AB\u56DE\u9000\u89E6\u78B0",
     "config.maxFileBytes.suffix": "MB",
+    "config.maxWorkspaceBytes.label": "\u5DE5\u4F5C\u533A\u603B\u91CF\u4E0A\u9650",
+    "config.maxWorkspaceBytes.hint": "\u5355\u5DE5\u4F5C\u533A\u53EF\u7EB3\u5165\u5FEB\u7167\u7684\u6587\u4EF6\u603B\u91CF\uFF0C\u8D85\u8FC7\u5373\u505C\u7528\u8BE5\u5DE5\u4F5C\u533A\u5FEB\u7167\uFF08\u4E0D\u622A\u65AD\uFF0C\u907F\u514D\u56DE\u9000\u8BEF\u5220\uFF09\uFF1B0 \u8868\u793A\u4E0D\u9650\u5236",
+    "config.maxWorkspaceBytes.suffix": "MB",
+    "config.scanBudgetMs.label": "\u626B\u63CF\u65F6\u95F4\u9884\u7B97",
+    "config.scanBudgetMs.hint": "\u5FEB\u7167\u524D\u7684\u6587\u4EF6\u626B\u63CF\u8D85\u8FC7\u8BE5\u65F6\u957F\u5373\u505C\u7528\u672C\u6B21\u5FEB\u7167\uFF1B0 \u8868\u793A\u4E0D\u9650\u5236",
+    "config.scanBudgetMs.suffix": "\u79D2",
     "config.maxSnapshotsPerWorkspace.label": "\u5FEB\u7167\u603B\u91CF\u4E0A\u9650",
     "config.maxSnapshotsPerWorkspace.hint": "\u6BCF\u5DE5\u4F5C\u533A\u4FDD\u7559\u7684\u6700\u5927\u5FEB\u7167\u6570\uFF0C\u8D85\u9650\u5220\u9664\u6700\u65E7\u7684\uFF1B0 \u8868\u793A\u4E0D\u9650\u5236",
     "config.maxSnapshotsPerWorkspace.suffix": "\u6761",
@@ -494,6 +500,8 @@
     "config.err.gcSnaps": "\u5FEB\u7167\u6761\u6570\u9608\u503C\u5FC5\u987B\u662F >= 1 \u7684\u6574\u6570",
     "config.err.gcHours": "gc \u5C0F\u65F6\u9608\u503C\u5FC5\u987B\u662F >= 1 \u7684\u6574\u6570",
     "config.err.maxFileBytes": "\u6587\u4EF6\u5927\u5C0F\u4E0A\u9650\u81F3\u5C11 0.01 MB",
+    "config.err.maxWorkspaceBytes": "\u5DE5\u4F5C\u533A\u603B\u91CF\u4E0A\u9650\u5FC5\u987B\u662F >= 0 \u7684\u6570\u5B57\uFF080 \u8868\u793A\u4E0D\u9650\u5236\uFF09",
+    "config.err.scanBudgetMs": "\u626B\u63CF\u65F6\u95F4\u9884\u7B97\u5FC5\u987B\u662F >= 0 \u7684\u6570\u5B57\uFF080 \u8868\u793A\u4E0D\u9650\u5236\uFF09",
     "config.err.maxSnapshots": "\u5FEB\u7167\u603B\u91CF\u4E0A\u9650\u5FC5\u987B\u662F >= 0 \u7684\u6574\u6570\uFF080 \u8868\u793A\u4E0D\u9650\u5236\uFF09",
     "config.err.retentionDays": "\u4FDD\u7559\u5929\u6570\u5FC5\u987B\u662F >= 0 \u7684\u6574\u6570\uFF080 \u8868\u793A\u4E0D\u542F\u7528\uFF09",
     "config.err.locale": "\u754C\u9762\u8BED\u8A00\u5FC5\u987B\u662F auto / zh / en \u4E4B\u4E00",
@@ -676,6 +684,12 @@
     "config.maxFileBytes.label": "File size limit",
     "config.maxFileBytes.hint": "Files larger than this are not snapshotted and never touched by rollback",
     "config.maxFileBytes.suffix": "MB",
+    "config.maxWorkspaceBytes.label": "Workspace total limit",
+    "config.maxWorkspaceBytes.hint": "Total snapshot-eligible file size per workspace; beyond it snapshots are disabled for that workspace (no truncation, which would make rollback delete skipped files); 0 means unlimited",
+    "config.maxWorkspaceBytes.suffix": "MB",
+    "config.scanBudgetMs.label": "Scan time budget",
+    "config.scanBudgetMs.hint": "Skip this snapshot when the pre-snapshot file scan exceeds this duration; 0 means unlimited",
+    "config.scanBudgetMs.suffix": "s",
     "config.maxSnapshotsPerWorkspace.label": "Snapshot count limit",
     "config.maxSnapshotsPerWorkspace.hint": "Maximum snapshots kept per workspace; the oldest are deleted beyond it; 0 means unlimited",
     "config.maxSnapshotsPerWorkspace.suffix": "snapshots",
@@ -706,6 +720,8 @@
     "config.err.gcSnaps": "The snapshot count threshold must be an integer >= 1",
     "config.err.gcHours": "The gc hour threshold must be an integer >= 1",
     "config.err.maxFileBytes": "The file size limit must be at least 0.01 MB",
+    "config.err.maxWorkspaceBytes": "The workspace total limit must be a number >= 0 (0 means unlimited)",
+    "config.err.scanBudgetMs": "The scan time budget must be a number >= 0 (0 means unlimited)",
     "config.err.maxSnapshots": "The snapshot count limit must be an integer >= 0 (0 means unlimited)",
     "config.err.retentionDays": "Retention days must be an integer >= 0 (0 disables it)",
     "config.err.locale": "Language must be one of auto / zh / en",
@@ -1701,6 +1717,9 @@
               gcSnaps: String(v.gcSnaps == null ? "" : v.gcSnaps),
               gcHours: String(v.gcHours == null ? "" : v.gcHours),
               maxFileBytes: bytesToMb2(v.maxFileBytes),
+              maxWorkspaceBytes: bytesToMb2(v.maxWorkspaceBytes),
+              // 扫描预算持久化为毫秒、展示为秒（整数）；0 表示不限制，原样显示 0
+              scanBudgetMs: String(v.scanBudgetMs == null ? "" : Math.round(Number(v.scanBudgetMs) / 1e3)),
               maxSnapshotsPerWorkspace: String(v.maxSnapshotsPerWorkspace == null ? "" : v.maxSnapshotsPerWorkspace),
               baseExcludes: Array.isArray(v.baseExcludes) ? v.baseExcludes.join("\n") : "",
               refillDraft: v.refillDraft !== false,
@@ -1730,7 +1749,7 @@
       function save() {
         if (state.busy || !draft || !baseline) return;
         const patch = {};
-        for (const key of ["gcSnaps", "gcHours", "maxFileBytes", "maxSnapshotsPerWorkspace", "baseExcludes", "refillDraft", "snapshotEnabled", "archiveOriginal", "retentionDays", "locale"]) {
+        for (const key of ["gcSnaps", "gcHours", "maxFileBytes", "maxWorkspaceBytes", "scanBudgetMs", "maxSnapshotsPerWorkspace", "baseExcludes", "refillDraft", "snapshotEnabled", "archiveOriginal", "retentionDays", "locale"]) {
           const value = draft[key];
           if (value !== void 0 && value !== baseline[key]) patch[key] = value;
         }
@@ -1763,6 +1782,22 @@
           }
           clean.maxFileBytes = Math.round(mb * 1048576);
         }
+        if (patch.maxWorkspaceBytes !== void 0) {
+          const mb = Number(patch.maxWorkspaceBytes);
+          if (!Number.isFinite(mb) || mb < 0) {
+            setState({ busy: false, message: t("config.err.maxWorkspaceBytes"), error: true });
+            return;
+          }
+          clean.maxWorkspaceBytes = Math.round(mb * 1048576);
+        }
+        if (patch.scanBudgetMs !== void 0) {
+          const s = Number(patch.scanBudgetMs);
+          if (!Number.isFinite(s) || s < 0) {
+            setState({ busy: false, message: t("config.err.scanBudgetMs"), error: true });
+            return;
+          }
+          clean.scanBudgetMs = Math.round(s * 1e3);
+        }
         if (patch.maxSnapshotsPerWorkspace !== void 0) {
           const n = parseInt(String(patch.maxSnapshotsPerWorkspace), 10);
           if (!Number.isFinite(n) || n < 0) {
@@ -1937,6 +1972,9 @@
           numRow("gcSnaps", t("config.gcSnaps.label"), t("config.gcSnaps.hint"), { suffixKey: "config.gcSnaps.suffix", min: 1, step: 1 }),
           numRow("gcHours", t("config.gcHours.label"), t("config.gcHours.hint"), { suffixKey: "config.gcHours.suffix", min: 1, step: 1 }),
           numRow("maxFileBytes", t("config.maxFileBytes.label"), t("config.maxFileBytes.hint"), { suffixKey: "config.maxFileBytes.suffix", min: 0.01, step: 0.5 }),
+          // issue #24 护栏：单文件上限之外的两道闸（总量 + 扫描耗时），0 = 不限制
+          numRow("maxWorkspaceBytes", t("config.maxWorkspaceBytes.label"), t("config.maxWorkspaceBytes.hint"), { suffixKey: "config.maxWorkspaceBytes.suffix", min: 0, step: 16 }),
+          numRow("scanBudgetMs", t("config.scanBudgetMs.label"), t("config.scanBudgetMs.hint"), { suffixKey: "config.scanBudgetMs.suffix", min: 0, step: 1 }),
           numRow("maxSnapshotsPerWorkspace", t("config.maxSnapshotsPerWorkspace.label"), t("config.maxSnapshotsPerWorkspace.hint"), { suffixKey: "config.maxSnapshotsPerWorkspace.suffix", min: 0, step: 1 }),
           numRow("retentionDays", t("config.retentionDays.label"), t("config.retentionDays.hint"), { suffixKey: "config.retentionDays.suffix", min: 0, step: 1 }),
           React.createElement("div", { className: "dsh-recall-cfg-group" }, t("config.group.ui")),

package/lib/config.js

@@ -34,7 +34,12 @@ function withVolatile(field) {
 const Config = Schema.object({
   gcSnaps: withVolatile(Schema.number().default(50).description("\u6BCF\u79EF\u7D2F\u591A\u5C11\u6761\u5FEB\u7167\u89E6\u53D1\u4E00\u6B21 git gc")),
   gcHours: withVolatile(Schema.number().default(24).description("\u8DDD\u4E0A\u6B21 gc \u8D85\u8FC7\u591A\u5C11\u5C0F\u65F6\u89E6\u53D1\uFF08\u4E0E\u6761\u6570\u5148\u5230\u5148\u89E6\u53D1\uFF09")),
-  maxFileBytes: withVolatile(Schema.number().default(104857600).description("\u8D85\u8FC7\u8BE5\u5B57\u8282\u6570\u7684\u6587\u4EF6\u4E0D\u8FDB\u5FEB\u7167\u3001\u4E0D\u88AB\u56DE\u9000\u89E6\u78B0")),
+  maxFileBytes: withVolatile(Schema.number().default(8388608).description("\u8D85\u8FC7\u8BE5\u5B57\u8282\u6570\u7684\u6587\u4EF6\u4E0D\u8FDB\u5FEB\u7167\u3001\u4E0D\u88AB\u56DE\u9000\u89E6\u78B0")),
+  // issue #24：单文件上限挡不住「大量小文件」——下载目录 321 个 ≤100MB 文件
+  // 合计 1.05GB 全部进快照。总量超限时**整体停用该工作区快照**而非截断：
+  // 截断快照回退时，未纳入的文件会命中回退脚本的「当前有、目标无」删除侧。
+  maxWorkspaceBytes: withVolatile(Schema.number().default(268435456).description("\u5355\u5DE5\u4F5C\u533A\u53EF\u7EB3\u5165\u5FEB\u7167\u7684\u6587\u4EF6\u603B\u91CF\u4E0A\u9650\uFF0C\u8D85\u8FC7\u5373\u505C\u7528\u8BE5\u5DE5\u4F5C\u533A\u5FEB\u7167\uFF1B0 \u8868\u793A\u4E0D\u9650\u5236")),
+  scanBudgetMs: withVolatile(Schema.number().default(1e4).description("\u5FEB\u7167\u524D\u626B\u63CF\uFF08\u904D\u5386\u5DE5\u4F5C\u533A\u7EDF\u8BA1\u603B\u91CF\uFF09\u7684\u65F6\u95F4\u9884\u7B97\uFF0C\u8D85\u65F6\u5373\u505C\u7528\u672C\u6B21\u5FEB\u7167\uFF1B0 \u8868\u793A\u4E0D\u9650\u5236")),
   maxSnapshotsPerWorkspace: withVolatile(Schema.number().default(500).description("\u6BCF\u4E2A\u5DE5\u4F5C\u533A\u4FDD\u7559\u7684\u6700\u5927\u5FEB\u7167\u6570\uFF0C\u8D85\u9650\u5220\u9664\u6700\u65E7\u7684")),
   baseExcludes: withVolatile(Schema.array(Schema.string()).default(BASE_EXCLUDES).description("\u57FA\u7840\u6392\u9664\u8868\uFF08gitignore \u8BED\u6CD5\uFF0C\u4F18\u5148\u7EA7\u4F4E\u4E8E exclude.txt\uFF09")),
   refillDraft: withVolatile(Schema.boolean().default(true).description("\u64A4\u56DE\u540E\u628A\u88AB\u64A4\u56DE\u7684\u6D88\u606F\uFF08\u6587\u672C\u4E0E\u9644\u4EF6\uFF09\u56DE\u586B\u5230\u8F93\u5165\u6846")),
@@ -118,7 +123,9 @@ function isPlainObject(value) {
 const DEFAULTS = {
   gcSnaps: 50,
   gcHours: 24,
-  maxFileBytes: 104857600,
+  maxFileBytes: 8388608,
+  maxWorkspaceBytes: 268435456,
+  scanBudgetMs: 1e4,
   maxSnapshotsPerWorkspace: 500,
   baseExcludes: BASE_EXCLUDES,
   refillDraft: true,
@@ -136,7 +143,9 @@ function createConfig(raw) {
   }
   const gcSnaps = pickNumber(process.env.DSH_RECALL_GC_SNAPS, pickNumber(cfg.gcSnaps, 50, 1), 1);
   const gcHours = pickNumber(process.env.DSH_RECALL_GC_HOURS, pickNumber(cfg.gcHours, 24, 1), 1);
-  const maxFileBytes = pickNumber(cfg.maxFileBytes, 104857600, 1024);
+  const maxFileBytes = pickNumber(cfg.maxFileBytes, 8388608, 1024);
+  const maxWorkspaceBytes = pickNumber(cfg.maxWorkspaceBytes, 268435456, 0);
+  const scanBudgetMs = pickNumber(cfg.scanBudgetMs, 1e4, 0);
   const rawMax = typeof cfg.maxSnapshotsPerWorkspace === "number" ? cfg.maxSnapshotsPerWorkspace : parseInt(String(cfg.maxSnapshotsPerWorkspace == null ? "" : cfg.maxSnapshotsPerWorkspace), 10);
   const maxSnapshotsPerWorkspace = Number.isFinite(rawMax) ? Math.max(0, rawMax) : 500;
   const baseExcludes = Array.isArray(cfg.baseExcludes) && cfg.baseExcludes.length ? cfg.baseExcludes.filter((p) => typeof p === "string" && p.trim()) : BASE_EXCLUDES;
@@ -146,7 +155,7 @@ function createConfig(raw) {
   const rawDays = typeof cfg.retentionDays === "number" ? cfg.retentionDays : parseInt(String(cfg.retentionDays == null ? "" : cfg.retentionDays), 10);
   const retentionDays = Number.isFinite(rawDays) ? Math.max(0, rawDays) : 0;
   const locale = cfg.locale === "zh" || cfg.locale === "en" ? cfg.locale : "auto";
-  return { gcSnaps, gcHours, maxFileBytes, maxSnapshotsPerWorkspace, baseExcludes, refillDraft, snapshotEnabled, archiveOriginal, retentionDays, locale };
+  return { gcSnaps, gcHours, maxFileBytes, maxWorkspaceBytes, scanBudgetMs, maxSnapshotsPerWorkspace, baseExcludes, refillDraft, snapshotEnabled, archiveOriginal, retentionDays, locale };
 }
 export {
   Config,

package/lib/index.js

@@ -236,6 +236,26 @@ function apply(ctx, config) {
     },
     agentBusy: (root) => agentBusy(null, root)
   });
+  const rootReady = /* @__PURE__ */ new Map();
+  function ensureRootReady(root, sessionId) {
+    const cached = rootReady.get(root);
+    if (cached) return cached;
+    const task = (async () => {
+      let store = await rt.resolveStore(root);
+      store = await rt.tryUpgradeToHome(root);
+      await rt.ensureGit(root, store);
+      await snaps.loadIndex(root, sessionId);
+      await snaps.rebuildOrphans(root, sessionId || "");
+      if (await snaps.guardStoreFormat(store)) await intentJournal.recover(store);
+      rt.cleanupLegacy(root);
+      return store;
+    })();
+    rootReady.set(root, task);
+    task.catch(() => {
+      rootReady.delete(root);
+    });
+    return task;
+  }
   const deps = {
     ctx,
     rt,
@@ -247,6 +267,7 @@ function apply(ctx, config) {
     enqueue,
     agentBusy,
     runLimited,
+    ensureRootReady,
     errBody,
     listExcludeFiles,
     dumpStores,
@@ -343,13 +364,14 @@ function apply(ctx, config) {
       } catch (error) {
       }
     }
-    for (const [cwd, sessionId] of warmupRoots) {
-      Promise.resolve(rt.resolveStore(cwd)).then(() => rt.tryUpgradeToHome(cwd)).then((store) => rt.ensureGit(cwd, store)).then(() => snaps.loadIndex(cwd, sessionId)).then(() => snaps.rebuildOrphans(cwd, sessionId)).then(async () => {
-        const st = state.stores.get(cwd);
-        if (st && await snaps.guardStoreFormat(st)) await intentJournal.recover(st);
-      }).then(() => rt.cleanupLegacy(cwd)).catch(() => {
-      });
-    }
+    const warmupTasks = Array.from(
+      warmupRoots,
+      ([cwd, sessionId]) => () => ensureRootReady(cwd, sessionId || "").then(() => {
+      }).catch(() => {
+      })
+      // 预热链失败整体吞掉（不刷启动噪音，原语义）
+    );
+    await runLimited(warmupTasks, 2);
   })().catch((error) => {
     console.error("recall warmup skipped:", error);
   });

package/lib/routes-core.js

@@ -4,7 +4,7 @@ import { buildArtifactRootSegment, buildRootNotice } from "./exclude-patterns.js
 const RECALL_EVENT_COMPLETE_HOST = "dsh-recall/complete";
 const RECALL_EVENT_FAILED_HOST = "dsh-recall/failed";
 function createRoutesCore(deps) {
-  const { rt, snaps, state, cfg, supported, enqueue, agentBusy, rescueRollback, intentJournal, emitEvent, E } = deps;
+  const { rt, snaps, state, cfg, supported, enqueue, agentBusy, rescueRollback, intentJournal, ensureRootReady, emitEvent, E } = deps;
   return {
     "init": async (args) => {
       if (!supported) {
@@ -14,13 +14,7 @@ function createRoutesCore(deps) {
       const root = await rt.resolveRoot(sessionId);
       let notice = null;
       if (root) {
-        let store = await rt.resolveStore(root);
-        store = await rt.tryUpgradeToHome(root);
-        await rt.ensureGit(root, store);
-        await snaps.loadIndex(root, sessionId);
-        await snaps.rebuildOrphans(root, sessionId);
-        if (store && await snaps.guardStoreFormat(store)) await intentJournal.recover(store);
-        rt.cleanupLegacy(root);
+        const store = await ensureRootReady(root, sessionId);
         notice = {
           gitMissing: state.gitExe === "",
           homeFallback: store ? !store.home : false

package/lib/routes-manage.js

@@ -280,6 +280,8 @@ function createRoutesManage(deps) {
           gcSnaps: cfg.gcSnaps,
           gcHours: cfg.gcHours,
           maxFileBytes: cfg.maxFileBytes,
+          maxWorkspaceBytes: cfg.maxWorkspaceBytes,
+          scanBudgetMs: cfg.scanBudgetMs,
           maxSnapshotsPerWorkspace: cfg.maxSnapshotsPerWorkspace,
           baseExcludes: cfg.baseExcludes.slice(),
           refillDraft: cfg.refillDraft,
@@ -305,6 +307,16 @@ function createRoutesManage(deps) {
       if (patch.gcSnaps !== void 0) clean.gcSnaps = Number(patch.gcSnaps);
       if (patch.gcHours !== void 0) clean.gcHours = Number(patch.gcHours);
       if (patch.maxFileBytes !== void 0) clean.maxFileBytes = Number(patch.maxFileBytes);
+      if (patch.maxWorkspaceBytes !== void 0) {
+        const n = Number(patch.maxWorkspaceBytes);
+        if (!Number.isFinite(n) || n < 0) return { ok: false, code: E.RECALL_BAD_TYPE, message: "\u5DE5\u4F5C\u533A\u603B\u91CF\u4E0A\u9650\u5FC5\u987B\u662F >= 0 \u7684\u6570\u5B57\uFF080 \u8868\u793A\u4E0D\u9650\u5236\uFF09" };
+        clean.maxWorkspaceBytes = Math.trunc(n);
+      }
+      if (patch.scanBudgetMs !== void 0) {
+        const n = Number(patch.scanBudgetMs);
+        if (!Number.isFinite(n) || n < 0) return { ok: false, code: E.RECALL_BAD_TYPE, message: "\u626B\u63CF\u65F6\u95F4\u9884\u7B97\u5FC5\u987B\u662F >= 0 \u7684\u6570\u5B57\uFF080 \u8868\u793A\u4E0D\u9650\u5236\uFF09" };
+        clean.scanBudgetMs = Math.trunc(n);
+      }
       if (patch.maxSnapshotsPerWorkspace !== void 0) {
         const n = Number(patch.maxSnapshotsPerWorkspace);
         if (!Number.isFinite(n)) return { ok: false, code: E.RECALL_BAD_TYPE, message: "\u5FEB\u7167\u603B\u91CF\u4E0A\u9650\u5FC5\u987B\u662F\u6570\u5B57" };

package/lib/scripts.posix.js

@@ -2,7 +2,7 @@ function psq(value) {
   return "'" + String(value).replace(/'/g, "'\\''") + "'";
 }
 const UTF8_PRELUDE = "export LC_ALL=C";
-const MAX_FILE_BYTES = 104857600;
+const MAX_FILE_BYTES = 8388608;
 const STALE_LOCK_MIN = 5;
 const HEARTBEAT_TTL_S = 900;
 const FIDELITY_ATTRS = "* -text -filter -ident -export-ignore -export-subst -working-tree-encoding";
@@ -18,7 +18,7 @@ function dropGitlinksBlock() {
     "done"
   ].join("\n");
 }
-function oversizeBlock(maxBytes) {
+function dirPruneArgsBlock() {
   return [
     "oversize_args=()",
     'while IFS= read -r line || [ -n "$line" ]; do',
@@ -31,12 +31,41 @@ function oversizeBlock(maxBytes) {
     '  if [ ${#oversize_args[@]} -eq 0 ]; then oversize_args+=(-name "$t"); else oversize_args+=(-o -name "$t"); fi',
     'done <<< "$new_exc"',
     "oversize_prune=()",
-    "if [ ${#oversize_args[@]} -gt 0 ]; then oversize_prune=('(' -type d '(' \"${oversize_args[@]}\" ')' ')' -prune -o); fi",
+    "if [ ${#oversize_args[@]} -gt 0 ]; then oversize_prune=('(' -type d '(' \"${oversize_args[@]}\" ')' ')' -prune -o); fi"
+  ].join("\n");
+}
+function oversizeBlock(maxBytes) {
+  return [
+    dirPruneArgsBlock(),
     'find "$root" "${oversize_prune[@]}" -type f -size +' + String(maxBytes || MAX_FILE_BYTES) + "c -print0 2>/dev/null | while IFS= read -r -d '' f; do",
     `  printf '%s\\0' "\${f#"$root"/}"`,
     'done | xargs -0 "$git" --literal-pathspecs --git-dir="$g" update-index --force-remove -- 2>/dev/null || true'
   ].join("\n");
 }
+function limitScanBlock(maxBytes, fileMaxBytes, budgetMs) {
+  const limit = maxBytes > 0 ? String(maxBytes) : "0";
+  const fileLimit = String(fileMaxBytes || MAX_FILE_BYTES);
+  const budgetS = budgetMs > 0 ? String(Math.ceil(budgetMs / 1e3)) : "0";
+  return [
+    dirPruneArgsBlock(),
+    "limit_start=$(date +%s)",
+    `if find "$root" -maxdepth 0 -printf '' >/dev/null 2>&1; then`,
+    `  limit_sizes=$(find "$root" "\${oversize_prune[@]}" -type f -printf '%s\\n' 2>/dev/null)`,
+    "else",
+    '  limit_sizes=$(find "$root" "${oversize_prune[@]}" -type f -exec stat -f%z {} + 2>/dev/null)',
+    "fi",
+    // 口径 = 实际会进快照的字节：超过单文件上限的文件随后被 oversizeBlock
+    // 移出 index，不计入总量（同 pwsh 侧，防一个大文件把干净项目误判超限）
+    `limit_total=$(printf '%s\\n' "$limit_sizes" | awk -v lim=` + limit + " -v flim=" + fileLimit + ` '{ if ($1 <= flim) { s += $1; if (lim > 0 && s > lim) { print "OVER " s; exit } } } END { if (lim <= 0 || s <= lim) print s }')`,
+    "limit_elapsed=$(( $(date +%s) - limit_start ))",
+    'case "$limit_total" in',
+    '  OVER\\ *) echo "SNAP_LIMIT bytes ${limit_total#OVER } ' + limit + '"; exit 0 ;;',
+    "esac",
+    "if [ " + budgetS + ' -gt 0 ] && [ "$limit_elapsed" -gt ' + budgetS + " ]; then",
+    '  echo "SNAP_LIMIT time $((limit_elapsed * 1000)) $(( ' + budgetS + ' * 1000 ))"; exit 0',
+    "fi"
+  ].join("\n");
+}
 function excludeSyncBlock(excludeFile, base) {
   const baseList = Array.isArray(base) && base.length ? base : [".git", "node_modules/", ".dsh-recall-snapshots/", "dsh-recall-snapshots/"];
   const baseLines = baseList.join("\n") + "\n";
@@ -152,6 +181,8 @@ function snapshotScript(root, store, gitExe, messageId, base) {
     heartbeatBlock(),
     dropGitlinksBlock(),
     excludeSyncBlock(store.excludeFile, base),
+    // issue #24：总量/预算护栏先于 add——超限时连 add 都不跑
+    limitScanBlock(store.maxWorkspaceBytes, store.maxFileBytes, store.scanBudgetMs),
     attrsMigrateBlock(),
     // fail-open add（issue #7 加固，语义见 pwsh 版同款注释）：--ignore-errors
     // 下「无法索引的路径」以退出码 1 结束但索引已落盘；≥2 才是真 fatal，

package/lib/scripts.pwsh.js

@@ -2,7 +2,7 @@ function psq(value) {
   return "'" + String(value).replace(/'/g, "''") + "'";
 }
 const UTF8_PRELUDE = "$OutputEncoding = [Text.UTF8Encoding]::new($false)\ntry { [Console]::OutputEncoding = [Text.UTF8Encoding]::new($false) } catch {}";
-const MAX_FILE_BYTES = 104857600;
+const MAX_FILE_BYTES = 8388608;
 const STALE_LOCK_MIN = 5;
 const HEARTBEAT_TTL_S = 900;
 const FIDELITY_ATTRS = "* -text -filter -ident -export-ignore -export-subst -working-tree-encoding";
@@ -84,6 +84,38 @@ function oversizeBlock(maxBytes) {
     "}"
   ].join("\n");
 }
+function limitScanBlock(maxBytes, fileMaxBytes, budgetMs) {
+  const limit = maxBytes > 0 ? String(maxBytes) : "0";
+  const fileLimit = String(fileMaxBytes || MAX_FILE_BYTES);
+  const budget = budgetMs > 0 ? String(budgetMs) : "0";
+  return [
+    "$limitSw = [Diagnostics.Stopwatch]::StartNew()",
+    dirSkipSetBlock("limitSkip"),
+    "$limitStack = [System.Collections.Generic.Stack[string]]::new()",
+    "$limitStack.Push($root)",
+    "$limitBytes = [long]0",
+    "$limitHit = ''",
+    "while ($limitStack.Count -gt 0) {",
+    "  if (" + budget + " -gt 0 -and $limitSw.ElapsedMilliseconds -gt " + budget + ") { $limitHit = 'time'; break }",
+    "  $dir = $limitStack.Pop()",
+    "  try {",
+    "    $di = [System.IO.DirectoryInfo]::new($dir)",
+    // 口径 = 实际会进快照的字节：超过单文件上限的文件随后被 oversizeBlock
+    // 移出 index，不该计入总量（否则一个 300MB 视频就能把干净项目误判超限）
+    "    foreach ($f in $di.EnumerateFiles()) { if ($f.Length -le " + fileLimit + ") { $limitBytes += $f.Length } }",
+    "    if (" + limit + " -gt 0 -and $limitBytes -gt " + limit + ") { $limitHit = 'bytes' }",
+    "    if ($limitHit) { break }",
+    "    foreach ($d in $di.EnumerateDirectories()) {",
+    "      if ($limitSkip.Contains($d.Name)) { continue }",
+    "      if (($d.Attributes -band [System.IO.FileAttributes]::ReparsePoint) -ne 0) { continue }",
+    "      $limitStack.Push($d.FullName)",
+    "    }",
+    "  } catch {}",
+    "}",
+    "if ($limitHit -eq 'bytes') { Write-Output ('SNAP_LIMIT bytes ' + $limitBytes + ' ' + " + limit + "); exit 0 }",
+    "if ($limitHit -eq 'time') { Write-Output ('SNAP_LIMIT time ' + $limitSw.ElapsedMilliseconds + ' ' + " + budget + "); exit 0 }"
+  ].join("\n");
+}
 function excludeSyncBlock(excludeFile, base) {
   const baseList = (Array.isArray(base) && base.length ? base : [".git", "node_modules/", ".dsh-recall-snapshots/", "dsh-recall-snapshots/"]).map(psq).join(",");
   return [
@@ -199,6 +231,8 @@ function snapshotScript(root, store, gitExe, messageId, base) {
     heartbeatBlock(),
     dropGitlinksBlock(),
     excludeSyncBlock(store.excludeFile, base),
+    // issue #24：总量/预算护栏先于 add——超限时连 add 都不跑
+    limitScanBlock(store.maxWorkspaceBytes, store.maxFileBytes, store.scanBudgetMs),
     attrsMigrateBlock(),
     // fail-open add（issue #7 加固）：--ignore-errors 让「个别路径无法索引」
     // （无提交的嵌入式仓库、不可读文件等）以退出码 1 结束但索引照常落盘，

package/lib/snapshots.js

@@ -8,6 +8,29 @@ function parseSkipped(out) {
   }
   return skipped;
 }
+function parseSnapshotLimit(out) {
+  for (const line of String(out || "").split(/\r?\n/)) {
+    if (line.indexOf("SNAP_LIMIT ") !== 0) continue;
+    const parts = line.slice("SNAP_LIMIT ".length).trim().split(/\s+/);
+    const kind = parts[0];
+    if (kind !== "bytes" && kind !== "time") continue;
+    const value = parseInt(parts[1] ?? "", 10);
+    const limit = parseInt(parts[2] ?? "", 10);
+    if (!Number.isFinite(value) || !Number.isFinite(limit)) continue;
+    return { kind, value, limit };
+  }
+  return null;
+}
+function bytesText(bytes) {
+  if (bytes >= 1048576) return Math.round(bytes / 1048576) + " MB";
+  return Math.max(1, Math.round(bytes / 1024)) + " KB";
+}
+function buildSnapshotLimitNotice(limit) {
+  if (limit.kind === "bytes") {
+    return "\u8BE5\u5DE5\u4F5C\u533A\u53EF\u7EB3\u5165\u5FEB\u7167\u7684\u6587\u4EF6\u603B\u91CF\u8D85\u8FC7\u4E0A\u9650\uFF08\u7EA6 " + bytesText(limit.value) + " / " + bytesText(limit.limit) + "\uFF09\uFF0C\u5DF2\u505C\u7528\u5FEB\u7167\uFF1B\u53EF\u8C03\u5927\u300C\u5DE5\u4F5C\u533A\u603B\u91CF\u4E0A\u9650\u300D\u6216\u8865\u5145\u6392\u9664\u8868\u540E\u81EA\u52A8\u6062\u590D";
+  }
+  return "\u5FEB\u7167\u524D\u7684\u6587\u4EF6\u626B\u63CF\u8D85\u8FC7\u65F6\u95F4\u9884\u7B97\uFF08\u7EA6 " + Math.max(1, Math.round(limit.value / 1e3)) + " \u79D2 / " + Math.max(1, Math.round(limit.limit / 1e3)) + " \u79D2\uFF09\uFF0C\u5DF2\u505C\u7528\u5FEB\u7167\uFF1B\u53EF\u8C03\u5927\u300C\u626B\u63CF\u65F6\u95F4\u9884\u7B97\u300D\u6216\u8865\u5145\u6392\u9664\u8868\u540E\u81EA\u52A8\u6062\u590D";
+}
 function parseChanges(text, isWin) {
   if (isWin) {
     const parsed = JSON.parse(text);
@@ -163,6 +186,9 @@ function createSnapshots(ctx, rt, config) {
   const FUSE_BACKOFF_BASE_MS = 5 * 60 * 1e3;
   const FUSE_BACKOFF_CAP_MS = 60 * 60 * 1e3;
   const snapFailures = /* @__PURE__ */ new Map();
+  const SNAP_LIMIT_RETRY_MS = 10 * 60 * 1e3;
+  const snapLimits = /* @__PURE__ */ new Map();
+  const limitBlockedAt = /* @__PURE__ */ new Map();
   const SUPPORTED_FORMAT = 1;
   const FORMAT_OK_TTL_MS = 3e4;
   const formatOkAt = /* @__PURE__ */ new Map();
@@ -375,6 +401,8 @@ function createSnapshots(ctx, rt, config) {
     if (!root) return;
     const fused = snapFailures.get(root);
     if (fused && Date.now() < fused.skipUntil) return;
+    const limited = snapLimits.get(root);
+    if (limited && limited.maxWorkspaceBytes === config.maxWorkspaceBytes && limited.scanBudgetMs === config.scanBudgetMs && Date.now() - limited.at < SNAP_LIMIT_RETRY_MS) return;
     if (buildArtifactRootSegment(root, BASE(), rt.isWin)) return;
     let store = await rt.resolveStore(root);
     store = await rt.tryUpgradeToHome(root);
@@ -387,6 +415,18 @@ function createSnapshots(ctx, rt, config) {
     await loadIndex(root, sessionId);
     try {
       const out = await rt.runShell(S.snapshotScript(root, store, state.gitExe || "", messageId, BASE()), { timeoutMs: 6e5, stdoutMaxBytes: 65536 });
+      const limit = parseSnapshotLimit(out);
+      if (limit) {
+        snapLimits.set(root, { ...limit, at: Date.now(), maxWorkspaceBytes: config.maxWorkspaceBytes, scanBudgetMs: config.scanBudgetMs });
+        const notice = buildSnapshotLimitNotice(limit);
+        const last = limitBlockedAt.get(root) || 0;
+        if (Date.now() - last >= 5 * 60 * 1e3) {
+          limitBlockedAt.set(root, Date.now());
+          rt.recordError("recall snapshot disabled for " + root + ": " + notice);
+        }
+        setFeedback(messageId, { failed: true, kind: "workspaceLimit", error: notice });
+        return;
+      }
       snapFailures.delete(root);
       state.snapshots.set(String(messageId), { root, time: time || Date.now(), sessionId });
       await saveIndex(root, sessionId);
@@ -533,12 +573,14 @@ function createSnapshots(ctx, rt, config) {
   return { saveIndex, loadIndex, readExclude, writeExclude, rebuildOrphans, captureSnapshot, diffFor, rollbackFor, resolveCutSeq, resolveStaleQueueItemIds, feedbackFor, loadLineage, recordLineage, guardStoreFormat };
 }
 export {
+  buildSnapshotLimitNotice,
   createSnapshots,
   isSafetySnapshotId,
   judgeStoreFormat,
   parseChanges,
   parseDiffOutput,
   parseSkipped,
+  parseSnapshotLimit,
   parseTagsWithTime,
   parseTreeId,
   rescueRollback,

package/lib/store.js

@@ -392,6 +392,14 @@ function createRuntime(ctx, config, deps) {
       excludeFile,
       get maxFileBytes() {
         return config.maxFileBytes;
+      },
+      // issue #24 快照护栏：与 maxFileBytes 同款 getter——设置页改完上限，
+      // 下一次快照立即按新值判定，无需重启或重建 store 缓存
+      get maxWorkspaceBytes() {
+        return config.maxWorkspaceBytes;
+      },
+      get scanBudgetMs() {
+        return config.scanBudgetMs;
       }
     };
   }

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "dsh-recall-plugin",
-  "version": "2.4.13",
+  "version": "2.4.14",
   "description": "在 DSH 中撤回自己发过的消息：工作区文件与对话历史一起回到那条消息发出之前，消息的文本与附件自动放回输入框，改完即可重发。文件走独立影子 git 快照（不碰项目自身的 git），对话走官方 sessions.fork，原会话归档可找回。",
   "icon": "assets/icon.svg",
   "type": "module",