dsh-moli 1.1.12 → 1.1.13

package/README.md

@@ -209,9 +209,9 @@ An unresolvable bundle is **skipped silently** apart from one stderr line
 
 ## Usage
 
-`moli_fetch` parameters: `url` (required), `dump`, `writeTo`, `eval`, `wait`, `waitSelector`,
-`delayMs`, `timeoutMs`, `maxChars`, `headers`, `userAgent`, `layout`, `scrollbars`, `noJs`,
-`noCss`, `resources`, `withFrames`, `insecureTls`, `profileDir`, `cookieFile`.
+`moli_fetch` parameters: `url` (required), `dump`, `writeTo`, `eval`, `scroll`, `wait`,
+`waitSelector`, `delayMs`, `timeoutMs`, `maxChars`, `headers`, `userAgent`, `layout`, `scrollbars`,
+`noJs`, `noCss`, `resources`, `withFrames`, `insecureTls`, `profileDir`, `cookieFile`, `proxy`.
 
 ```
 moli_fetch url=https://example.com dump=markdown             # token-efficient text
@@ -219,105 +219,30 @@ moli_fetch url=https://example.com dump=semantic_tree_text    # nodes with backe
 moli_fetch url=https://example.com eval="document.title"      # one computed value
 moli_fetch url=https://example.com dump=screenshot writeTo=/abs/path/a.png
 moli_fetch url=https://example.com dump=pdf        writeTo=/abs/path/a.pdf
+moli_fetch url=https://example.com dump=markdown scroll=800   # trigger lazy loading first
 ```
 
 Screenshot and PDF dumps need `writeTo`; the bytes are written verbatim rather than printed.
 
-### `moli_session` — an interactive browser
+### `scroll` — reach what only appears on a scroll
 
-`moli_fetch` loads a page and prints it. That covers reading, and nothing else: it cannot dismiss a
-consent wall, fill a search box, scroll a lazy list, or wait for a client-side route to change.
-`moli_session` drives a persistent browser instead, over the Chrome DevTools Protocol endpoint that
-`moli serve` publishes. State — cookies, navigation, typed input — survives between calls until you
-stop it.
+The engine serializes the whole document, so a plain fetch already contains everything the DOM holds.
+What it cannot contain is content that does not exist yet: a list that loads on the first `scroll`
+event, an `IntersectionObserver` that fires on entry, an image swapped in when it nears the viewport.
+`scroll` runs the scroll before the capture, so those handlers fire first.
 
 ```
-moli_session action=open  url=https://example.com        # start the browser and navigate
-moli_session action=snapshot                             # the rendered page as text
-moli_session action=click selector="#accept-cookies"
-moli_session action=type  selector="#q" text="moli" submit=true
-moli_session action=scroll dy=1200
-moli_session action=waitFor selector=".results"
-moli_session action=eval  expression="document.title"
-moli_session action=screenshot writeTo=/abs/path/a.png
-moli_session action=status                               # is it running, and on what page
-moli_session action=close                                # stop it and free the port
+moli_fetch url=https://example.com/feed dump=markdown scroll=600
+moli_fetch url=https://example.com/feed dump=markdown scroll=bottom
+moli_fetch url=https://example.com/feed dump=markdown scroll=-400    # back up
 ```
 
-Elements are addressed by **CSS selector**, never by pixel coordinates: the tool measures the element
-and dispatches real mouse and key events, so page handlers run exactly as they do for a person.
+Measured on a page whose `scroll` handler fills a slot: without `scroll` the dump says
+`STILL-EMPTY`, with `scroll=1000` it says `LAZY-CONTENT-1000`. It also moves the screenshot, so a
+scrolled `dump=screenshot` shows that part of the page.
 
-### Choosing a browser: `moli` or `chromium`
-
-`moli_session` can drive either engine, and you choose which — there is **no automatic fallback**,
-because switching engines when one click fails would make the timing and the behaviour depend on which
-operation happened to fail, and you could not tell which browser answered.
-
-```yaml
-config:
-  sessionBrowser: moli          # moli (default) or chromium
-  sessionBrowserPath: ''        # optional path to chrome.exe / msedge.exe / brave
-  sessionPort: 9222
-```
-
-**Why the choice exists.** Moli's element geometry is document-absolute and does not follow scrolling,
-and its hit test is bounded by the viewport height. Measured on Moli 1.1.16 and Chrome 155, same page,
-same element:
-
-| | `rect.y` at scrollY 0 / 400 / 800 | click a control below the first viewport |
-|---|---|---|
-| **moli** | 1008 / 1008 / 1008 — never moves | **impossible**; synthetic input cannot reach it |
-| **chromium** | 1008 / 608 / 208 — follows the scroll | **works**; the browser scrolls to it |
-
-So moli is the good default — it is the engine this plugin wraps, it is lighter, and it is already
-installed — and a real Chromium is what you switch to when a task needs an element further down a long
-page. When moli refuses, it says so, names the element, and points at both routes:
-
-```
-moli_session action=click selector="#far-down"
-  → "#far-down" is below the viewport (y=2548) and this engine cannot send input there
-
-# either click from inside the page (reaches it, but skips hover and focus behaviour)
-moli_session action=eval expression="document.querySelector('#far-down').click()"
-
-# or use a real browser for that session
-config: sessionBrowser: chromium
-```
-
-With `chromium` the plugin starts the browser it finds (Chrome, Edge or Brave, or `sessionBrowserPath`)
-in `--headless=new` mode with its own profile, so it does not touch your normal browsing profile.
-
-### Driving a browser you already have open
-
-Pass `cdpEndpoint` to attach to a CDP port instead of starting anything. This is the only way to inherit
-your own cookies and logins: start your browser with `--remote-debugging-port=9222`, then
-
-```
-moli_session action=open url=https://example.com cdpEndpoint=http://127.0.0.1:9222
-```
-
-The endpoint applies to that call only. A browser this plugin did not start is **never stopped by
-`close`**, and `status` reports `external: true` so you can tell.
-
-### `cdp` — the raw protocol escape hatch
-
-Everything the named actions do is an abstraction chosen in advance. `action=cdp` is not:
-
-```
-moli_session action=cdp method=Browser.getVersion
-moli_session action=cdp method=Network.setExtraHTTPHeaders params={"headers":{"X-Thing":"1"}}
-moli_session action=cdp method=DOM.setFileInputFiles params={"files":["/abs/a.png"],"nodeId":42}
-```
-
-It reaches what the wrapper does not: other targets, cross-origin frames, file inputs, extra headers,
-network interception. `params` may be an object or a JSON string.
-
-The session needs **Node 21 or newer** for the built-in `WebSocket`; on Node 20 the tool answers with
-that reason instead of failing obscurely. `moli_fetch` and `moli_probe` still work on 20.12.
-
-`moli_session` also takes `port` (default 9222). If that port is already served by a `moli serve` you
-started yourself, the tool connects to it rather than failing to bind — and `close` then leaves it
-alone, because it is not ours to stop.
+It runs as part of the engine's own pre-capture evaluation and therefore composes with `eval`: the
+scroll happens first, and the expression still returns its own value.
 
 ## Relationship to Moli's own agent skills
 
@@ -406,26 +331,12 @@ Override any field under the plugin's `config` entry in the profile patch layer.
         maxChars: 200000                                         # inline text truncation
         proxy: 'http://127.0.0.1:7890'                           # forward proxy for moli, downloads, and the installer's engine download
         insecureTls: true                                        # see the TLS notes below
-        sessionBrowser: moli                                     # or chromium, for the session tool
-        sessionBrowserPath: ''                                   # explicit chrome.exe / msedge.exe / brave
-        sessionPort: 9222                                        # CDP port for moli_session
-        blockPrivateNetworks: false                              # refuse private addresses (see the note below)
-        blockCidrs: []                                           # extra CIDRs to refuse
 ```
 
 The plugin-level `proxy` above is the default; `moli_fetch` also takes a `proxy` argument, so a single
 call can route through a different proxy without changing the profile. A loopback URL always bypasses
 whichever proxy is in effect.
 
-`blockPrivateNetworks` is **off by default, matching the engine**: `moli fetch http://10.0.0.1/` reaches
-a private address, so the plugin does not silently narrow what the moli you installed already does.
-Turn it on, or list `blockCidrs`, when the agent is following links on pages you do not control and
-you want the engine to refuse private destinations. Two caveats worth knowing before you rely on it:
-moli documents the policy as applying to **directly connected** targets, so a configured `proxy`
-routes around it, and only `blockCidrs` (which the proxy must enforce) covers that path. The sharpest
-target this protects is the cloud metadata address `169.254.169.254`, which hands out instance
-credentials on a VM.
-
 Without `exePath`, the plugin probes `exePath` → `MOLI_BIN` → `%LOCALAPPDATA%\Moli\bin\moli.exe` →
 `%USERPROFILE%\.local\bin\moli.exe`, then scans inside `%LOCALAPPDATA%\Moli` for a `moli.exe`, so an
 installation under a versioned subdirectory is still found.
@@ -488,25 +399,20 @@ Four suites live in [`verify/`](verify/), and all are runnable against a working
   `dump` discards its value, an expression that throws is classified as such instead of being blamed
   on the installation, truncation keeps the tail as well as the head, `proxy` is a per-call parameter,
   and `moli_probe` states which process its `httpsOk` describes.
-- `session-verify.mjs` drives `moli_session` end to end against a `data:` URL fixture, so it needs no
-  network and no site stays still underneath it: lifecycle and port release, snapshot, click, type
-  with and without clearing, press, scroll, `waitFor` in both directions, eval including a throwing
-  expression, screenshot byte signature, navigation by clicking a link, restart after close, and the
-  viewport limit described above — which is asserted as a limit, with the `eval` route that works
-  around it asserted next to it. It skips when no engine is installed.
-- `session-backends.mjs` is the comparison that justifies the second backend: the same page, the same
-  control below the viewport, asserted to be **refused on moli and clicked on Chromium**, plus the
-  `cdp` action on both. The Chromium half skips when the machine has no Chromium-family browser.
-- `session-attach-verify.mjs` covers external endpoints and ownership: attaching to a browser this
-  plugin did not start, identifying it correctly, refusing to stop it on `close`, and — the trap that
-  a behavioural probe got wrong — classifying an external **moli** as moli even though it answers
-  `/json/version` with `"Browser":"Chrome/145.0.0.0"`. It also asserts that naming a per-call endpoint
-  does not latch it, which an earlier version did: one call against a dead endpoint left the session
-  pointing at port 9 for the rest of the process.
-
-`.github/workflows/verify.yml` runs the first two on Linux, Windows and macOS (they need no engine and
-no network) and attempts the engine-dependent suites on Linux and Windows, reporting a missing engine
-as a skip rather than a failure.
+- `scroll-verify.mjs` checks the expression builder without an engine (pixels, negatives, `top`,
+  `bottom`, nonsense rejected, the caller's `eval` value preserved) and then, when an engine is
+  present, fetches a page whose `scroll` handler fills a slot and asserts the content appears with
+  `scroll` and the placeholder appears without it — a property of the output, not of an internal call.
+
+`.github/workflows/verify.yml` runs `schema-verify`, `empty-verify` and `scroll-verify` on Linux,
+Windows and macOS (they need no engine and no network) and attempts the engine-dependent suites on
+Linux and Windows, reporting a missing engine as a skip rather than a failure.
+
+`report-verify.mjs` is deliberately **not** in CI. Three of its checks fetch `example.com` and one
+fetches a specific forum thread, so it needs the open internet — and on a host whose traffic goes
+through a proxy, that proxy too. Useful where a network is available, but a suite that goes red
+because a website changed is worse than no suite, so it stays a local check. If you run it and see
+failures in sections 4–6 while sections 1–3 pass, suspect the network before the code.
 
 Beyond those, `lib/moli.js` and the tool layer were exercised end to end against Moli 1.1.16 on
 Windows: registration, probe, Markdown and JSON dumps, `eval` (including a tight-timeout regression
@@ -520,6 +426,21 @@ Confirmed at runtime too: a JavaScript-rendered page (GitHub search) returned 14
 Markdown containing 30 real repository matches when fetched through a local proxy. A throwaway
 profile with the plugin installed composes its config with no `JsonSchemaError` and no skipped bundle.
 
+## Version note: 1.1.11 and 1.1.12 are deprecated
+
+**Use 1.1.13 or later.** Two releases between them carried an interactive-browser experiment —
+`moli_session`, a second Chromium backend, a raw-CDP escape hatch, per-call CDP endpoints, persistent
+browser profiles — roughly 2,300 lines of machinery reaching well past what this plugin is for. It has
+been removed and the code is back to the 1.1.10 shape plus one focused addition.
+
+The useful finding from that work is kept in [`/lib/moli.js`](lib/moli.js) and appears above as the
+`scroll` parameter. Everything else it needed was already in `moli fetch`'s own `--eval`, so the
+experiment bought nothing that a parameter could not.
+
+On the versions themselves: npm allows a version to be unpublished only briefly and never
+individually, so 1.1.11 and 1.1.12 remain installable but are marked deprecated and point here.
+`npm install dsh-moli` resolves to 1.1.13.
+
 ## Releasing
 
 Publishing goes through GitHub Actions' OIDC identity, so **no npm token exists to expire**:

package/README.zh.md

@@ -195,9 +195,9 @@ profile 插件需要两半都齐：依赖边（`dependencies`）+ `dsh.profile.b
 
 ## 用法
 
-`moli_fetch` 参数：`url`（必填）、`dump`、`writeTo`、`eval`、`wait`、`waitSelector`、`delayMs`、
-`timeoutMs`、`maxChars`、`headers`、`userAgent`、`layout`、`scrollbars`、`noJs`、`noCss`、
-`resources`、`withFrames`、`insecureTls`、`profileDir`、`cookieFile`。
+`moli_fetch` 参数：`url`（必填）、`dump`、`writeTo`、`eval`、`scroll`、`wait`、`waitSelector`、
+`delayMs`、`timeoutMs`、`maxChars`、`headers`、`userAgent`、`layout`、`scrollbars`、`noJs`、
+`noCss`、`resources`、`withFrames`、`insecureTls`、`profileDir`、`cookieFile`、`proxy`。
 
 ```
 moli_fetch url=https://example.com dump=markdown            # 省 token 的正文
@@ -205,99 +205,29 @@ moli_fetch url=https://example.com dump=semantic_tree_text   # 带节点 id 的
 moli_fetch url=https://example.com eval="document.title"     # 取一个值
 moli_fetch url=https://example.com dump=screenshot writeTo=/绝对路径/a.png
 moli_fetch url=https://example.com dump=pdf        writeTo=/绝对路径/a.pdf
+moli_fetch url=https://example.com dump=markdown scroll=800  # 先触发懒加载再抓取
 ```
 
 截图与 PDF 必须给 `writeTo`；字节是原样落盘的，不会打印到输出里。
 
-### `moli_session` —— 可交互的浏览器
+### `scroll` —— 拿到"只有滚动后才出现"的内容
 
-`moli_fetch` 是"加载一页、打印出来"，只能读。它点不掉同意墙、填不了搜索框、滚不动懒加载列表，也等不到
-客户端路由切换。`moli_session` 驱动的是一个**常驻浏览器**，走 `moli serve` 暴露的 Chrome DevTools
-Protocol。状态（cookie、导航位置、已输入的内容）在多次调用之间保持，直到你显式停止。
+引擎会序列化整个文档，所以普通抓取**已经包含 DOM 里的一切**。它拿不到的是**尚未存在的内容**：首次
+`scroll` 事件才加载的列表、进入视口才触发的 `IntersectionObserver`、靠近视口才换上的图片。`scroll` 会在
+抓取前置入一次滚动，让这些处理器先跑起来。
 
 ```
-moli_session action=open  url=https://example.com        # 启动浏览器并导航
-moli_session action=snapshot                             # 渲染后的页面文本
-moli_session action=click selector="#accept-cookies"
-moli_session action=type  selector="#q" text="moli" submit=true
-moli_session action=scroll dy=1200
-moli_session action=waitFor selector=".results"
-moli_session action=eval  expression="document.title"
-moli_session action=screenshot writeTo=/绝对路径/a.png
-moli_session action=status                               # 是否在运行、当前在哪一页
-moli_session action=close                                # 停止并释放端口
+moli_fetch url=https://example.com/feed dump=markdown scroll=600
+moli_fetch url=https://example.com/feed dump=markdown scroll=bottom
+moli_fetch url=https://example.com/feed dump=markdown scroll=-400    # 往回滚
 ```
 
-元素一律用 **CSS 选择器**定位，不接受像素坐标：工具自己测量元素并派发真实的鼠标与键盘事件，所以页面的
-处理器会像人操作时一样执行。
+在一个"滚动处理器填充某个槽位"的页面上实测：不带 `scroll` 时 dump 是 `STILL-EMPTY`，带
+`scroll=1000` 时是 `LAZY-CONTENT-1000`。它同样会改变截图，所以带滚动的 `dump=screenshot` 拍到的是页面的
+那一段。
 
-### 选哪个浏览器：`moli` 还是 `chromium`
-
-`moli_session` 可以驱动两种引擎，由你选择——**没有自动降级**。因为"某个点击失败就换引擎"会让工具的耗时和
-行为取决于哪一步恰好失败，而且你无法知道最后是哪个浏览器在回答。
-
-```yaml
-config:
-  sessionBrowser: moli          # moli（默认）或 chromium
-  sessionBrowserPath: ''        # 可选，指定 chrome.exe / msedge.exe / brave
-  sessionPort: 9222
-```
-
-**为什么需要这个选择。** moli 的元素几何是**文档绝对坐标且不随滚动更新**，命中测试又受视口高度限制。在
-Moli 1.1.16 与 Chrome 155 上，同一页面、同一元素实测：
-
-| | `rect.y` 在 scrollY 0 / 400 / 800 | 点击首个视口以下的控件 |
-|---|---|---|
-| **moli** | 1008 / 1008 / 1008 —— 纹丝不动 | **做不到**，合成输入触达不了 |
-| **chromium** | 1008 / 608 / 208 —— 跟随滚动 | **可以**，浏览器会滚动到它 |
-
-所以 moli 是合适的默认值——它是本插件包装的引擎、更轻、而且你已经装了；而当任务需要长页面下方的元素时，
-就换成真实 Chromium。moli 拒绝时会把原因、元素和两条出路都讲清楚：
-
-```
-moli_session action=click selector="#far-down"
-  → "#far-down" is below the viewport (y=2548) and this engine cannot send input there
-
-# 要么在页面内部点击（能触达，但会跳过 hover 与 focus 行为）
-moli_session action=eval expression="document.querySelector('#far-down').click()"
-
-# 要么这个会话改用真实浏览器
-config: sessionBrowser: chromium
-```
-
-选 `chromium` 时，插件会在 `--headless=new` 模式下用**独立 profile** 启动它找到的浏览器（Chrome、Edge 或
-Brave，也可用 `sessionBrowserPath` 指定），不会碰你日常使用的浏览器配置。
-
-### 驱动你自己已经开着的浏览器
-
-传 `cdpEndpoint` 即可连接到已有的 CDP 端口，什么都不启动。这是**继承你自己 cookie 与登录态的唯一途径**：
-用 `--remote-debugging-port=9222` 启动你的浏览器，然后
-
-```
-moli_session action=open url=https://example.com cdpEndpoint=http://127.0.0.1:9222
-```
-
-该端点**只对当次调用生效**。不是本插件启动的浏览器**永远不会被 `close` 关掉**，并且 `status` 会报
-`external: true` 让你能分辨。
-
-### `cdp` —— 原始协议逃生舱
-
-具名动作全都是"预先替你决定好的抽象"，而 `action=cdp` 不是：
-
-```
-moli_session action=cdp method=Browser.getVersion
-moli_session action=cdp method=Network.setExtraHTTPHeaders params={"headers":{"X-Thing":"1"}}
-moli_session action=cdp method=DOM.setFileInputFiles params={"files":["/绝对/a.png"],"nodeId":42}
-```
-
-它能做到包装层做不到的事：切换 target、跨域 iframe、文件上传、额外的请求头、网络拦截。`params` 可以是对象
-或 JSON 字符串。
-
-本工具需要 **Node 21 或更新版本**（内置 `WebSocket`）；在 Node 20 上会直接说明原因，而不是给出费解的失败。
-`moli_fetch` 与 `moli_probe` 仍支持 20.12。
-
-`moli_session` 也接受 `port`（默认 9222）。如果该端口已经由你自己启动的 `moli serve` 占用，工具会连接它
-而不是绑定失败——此时 `close` **不会**停掉它，因为那不是我们的进程。
+它作为引擎自身"抓取前求值"的一部分执行，因此与 `eval` 可组合：**先滚动，表达式再读取页面，并且仍然返回
+它自己的值**。
 
 ## 与 Moli 官方 agent skill 的关系
 
@@ -374,22 +304,11 @@ cookie 驱动的查询参数。那次实测同时覆盖了代理下载路由与
         maxChars: 200000                                         # 内联文本截断阈值
         proxy: 'http://127.0.0.1:7890'                           # 转给本地正向代理（moli、下载、安装器内部引擎下载都走它）
         insecureTls: true                                        # 见下方 TLS 说明
-        sessionBrowser: moli                                     # 或 chromium，供 session 工具使用
-        sessionBrowserPath: ''                                   # 显式指定 chrome.exe / msedge.exe / brave
-        sessionPort: 9222                                        # moli_session 的 CDP 端口
-        blockPrivateNetworks: false                              # 拒绝私网地址（见下方说明）
-        blockCidrs: []                                           # 额外拒绝的 CIDR
 ```
 
 上面配置里的 `proxy` 是默认值；`moli_fetch` 也能接收 `proxy` 参数，因此单次调用可以走另一个代理而不必改
 profile。无论生效的是哪个代理，loopback 地址一律绕过它。
 
-`blockPrivateNetworks` **默认关闭，与引擎一致**：`moli fetch http://10.0.0.1/` 本来就能访问私网地址，插件
-不会悄悄收窄你已安装的 moli 的能力。当 agent 会在你无法控制的页面上跟着链接走、而你希望引擎拒绝私网目标时，
-再打开它或配置 `blockCidrs`。依赖它之前有两点需要知道：moli 文档写明该策略只作用于**直连**目标，因此配置了
-`proxy` 就会绕过它，只有 `blockCidrs`（由代理执行）能覆盖那条路径。这个开关保护的最锐利目标是云元数据地址
-`169.254.169.254`——在虚拟机上它会交出实例凭据。
-
 未设置 `exePath` 时探测顺序：`exePath` → 环境变量 `MOLI_BIN` → `%LOCALAPPDATA%\Moli\bin\moli.exe`
 → `%USERPROFILE%\.local\bin\moli.exe`，随后还会在 `%LOCALAPPDATA%\Moli` 内递归查找 `moli.exe`，
 所以装在带版本号的子目录里也能找到。
@@ -436,20 +355,18 @@ profile。无论生效的是哪个代理，loopback 地址一律绕过它。
 - `report-verify.mjs` 守住一份使用体验报告里的发现：`eval` 与 `dump` 同用会丢弃表达式值（已在参数描述里
   写明）、表达式抛异常时被正确归类而不是甩锅给"安装有问题"、截断同时保留头尾、`proxy` 是可按调用传入的参数、
   以及 `moli_probe` 会说明它的 `httpsOk` 描述的是哪个进程。
-- `session-verify.mjs` 用 `data:` URL 夹具端到端驱动 `moli_session`，因此不依赖网络、也不会因为站点变化而
-  失效：生命周期与端口释放、snapshot、click、带与不带清空的 type、press、scroll、两个方向的 `waitFor`、
-  含抛异常的 eval、截图字节签名、点击链接导航、关闭后重启，以及上面那条视口限制——限制被当作**限制**断言，
-  紧随其后断言真正能绕过它的 `eval` 路径。未安装引擎时跳过。
-- `session-backends.mjs` 是**证明第二个后端存在必要性**的对照：同一页面、同一个视口以下的控件，断言它
-  **在 moli 上被拒绝、在 Chromium 上被点中**，并在两者上都验证 `cdp` 动作。机器上没有 Chromium 系浏览器时
-  跳过 Chromium 那半。
-- `session-attach-verify.mjs` 覆盖外部端点与归属权：连接不是本插件启动的浏览器、正确识别它、`close` 时拒绝
-  停掉它；以及那个**行为探测会搞错的陷阱**——外部端点是 **moli** 时仍判定为 moli，尽管它在 `/json/version`
-  里报的是 `"Browser":"Chrome/145.0.0.0"`。它还断言按调用传入的端点**不会粘住**——早期版本会：一次对死端点
-  的调用会让整个进程后续都指向 9 端口。
-
-`.github/workflows/verify.yml` 在 Linux、Windows、macOS 上跑前两个（无需引擎、无需网络），在 Linux 与 Windows
-上尝试依赖引擎的几套；若 runner 上没有引擎，则报告为跳过而不是失败。
+- `scroll-verify.mjs` 在无引擎时校验表达式构造（像素值、负数、`top`、`bottom`、无效输入被拒、调用方的 `eval`
+  值被保留），有引擎时抓取一个"滚动处理器填充槽位"的页面，断言带 `scroll` 时内容出现、不带时只有占位符——
+  断言的是**输出**的性质，而不是内部调用。
+
+`.github/workflows/verify.yml` 在 Linux、Windows、macOS 上跑 `schema-verify`、`empty-verify` 与
+`scroll-verify`（无需引擎、无需网络），在 Linux 与 Windows 上尝试依赖引擎的几套；若 runner 上没有引擎，
+则报告为跳过而不是失败。
+
+`report-verify.mjs` **故意不放进 CI**：其中三项会抓 `example.com`，还有一项抓一个具体的论坛帖子，因此它
+需要能上外网——如果这台机器的流量走代理，还需要那个代理可用。有网络时它是有用的，但**一个因为网站改版就变
+红的测试套件，比没有套件更糟**，所以它只作为本机检查保留。如果你跑它时发现第 1–3 节通过而第 4–6 节失败，
+**先怀疑网络，再怀疑代码**。
 
 此外，`lib/moli.js` 与工具层在 Windows 上对 Moli 1.1.16 做了端到端验证：注册、probe、Markdown 与 JSON
 dump、`eval`（含针对 `-t` 参数位置的紧超时回归防护）、PNG 与 PDF 产物签名、截断、全部拒绝路径（二元 dump
@@ -460,6 +377,19 @@ dump、`eval`（含针对 `-t` 参数位置的紧超时回归防护）、PNG 与
 30 处真实结果匹配。另有一个装了本插件的一次性 profile，组合其配置时既无 `JsonSchemaError` 也无被跳过的
 bundle。
 
+## 版本说明：1.1.11 与 1.1.12 已废弃
+
+**请使用 1.1.13 或更高版本。** 这两个版本之间夹着一次"交互式浏览器"实验——`moli_session`、第二个
+Chromium 后端、原始 CDP 逃生舱、按调用的 CDP 端点、持久化浏览器 profile——约 2300 行机制，远远超出了这个
+插件的定位。它已被移除，代码回到 1.1.10 的形态，只保留一处聚焦的新增。
+
+那次工作里唯一有价值的发现保留在 [`/lib/moli.js`](lib/moli.js)，并以 `scroll` 参数的形式出现在上文。**它
+本来需要的其他一切，`moli fetch` 自带的 `--eval` 早就有了**——所以那次实验没有换来任何"一个参数换不来的
+东西"。
+
+关于这两个版本本身：npm 只允许在很短的时间窗口内撤回发布，且无法单独撤回某一个版本，因此 1.1.11 与
+1.1.12 仍然可安装，但已被标记为废弃并指向这里。`npm install dsh-moli` 会安装到 1.1.13。
+
 ## 发布
 
 发布走 GitHub Actions 的 OIDC 身份，**本机不存任何 npm token，因此没有会失效的凭据**：