dsh-m 0.9.12 → 0.9.13

package/README.en.md

@@ -48,6 +48,10 @@ The default registry includes DSH Skins, ModSearch, the Lark / QQ / Weixin / WeC
 
 The restart chain below applies to **Web only** (Desktop takes effect via the official app lifecycle: after installing, quit and reopen the Desktop app — see the 0.9.0 section). After any mutation, the already-open Market and Installed views refresh the profile state together, keeping badges and cards in sync without closing and reopening the marketplace; a "⚡ Restart" banner appears — under systemd, the DSH launcher's `appExit` hook hands the restart back to a unit configured with `Restart=on-failure` or `Restart=always`, avoiding a `systemctl` helper inside the unit cgroup that is about to stop; if `appExit` is unavailable, the fallback uses a manager-owned transient `systemd-run` service and only then a detached helper. The client confirms the replacement by boot id and dismisses the banner, leaving DSH Web's own background connection recovery in control; it does not force a full-page reload during the auth/route handoff. The restart chain has been live-verified on the current DSH Web `0.2.0-rc.2` (2026-10-01): dsh-m probes the unit's `Restart=` policy, hands the stop back via `appExit`, the `status=75/TEMPFAIL` exit is caught by the Restart policy and auto-started, and after recovery the page reconnects in the background with the panel fully functional. Historical scope: the `0.1.5-rc.1` era covered live `/dshm` ping and authenticated `303 → 200` checks; `0.1.2-rc.1` is covered by contract checks plus runtime shape-detection fallback (see the verified array) — with the deployment moved on, no live E2E is chased on retired generations; the transient `systemd-run` fallback only applies to hosts without `appExit` (all supported generations provide it) and stays a documented fallback rather than a release gate; repeated install/uninstall is covered by the profile-transaction test surface (compensation, post-install guard, 813 cases) plus the 0.4.0→0.4.2 consecutive-release evidence. Installs stream live pnpm progress (resolve → download → link → build).
 
+### Changed in 0.9.13 — desktop chip hover copy updated (owner decision)
+
+- The old copy "当前 DSH profile：{name}（Desktop 首发仅支持只读市场、安装新包与开关）" was stale after 0.9.8 opened upgrades/uninstall/self-upgrade; per owner decision it now reads "当前生效 Profile" (Active profile).
+
 ### Changed in 0.9.12 — re-issue of 0.9.11
 
 0.9.11 hit a npmjs ghost publish: the OIDC publish was accepted and **staged** (CLI exit 0, provenance published to the transparency log) but never committed into the registry — GET 404, and re-publishing the same version is rejected with 409 `Cannot publish over previously staged version`. After waiting out any propagation, the standard workaround applies: re-issue under a new number. **Content is identical to 0.9.11: settings force-refresh no longer takes down the community catalog card.**

package/README.md

@@ -48,6 +48,10 @@
 
 以下重启链路仅适用于 **Web**（Desktop 的生效走官方应用生命周期：安装完成后退出并重新打开 Desktop 应用即可，见 0.9.0 节）。安装 / 卸载 / 升级完成后，当前已打开的市场页与已装页会一起重新读取 profile 状态并同步徽标/卡片，不需要关闭后重新打开插件市场；随后出现「⚡ 一键重启」横幅——受 systemd 管理时通过 DSH launcher 的 `appExit` 交给服务的 `Restart` 策略，避免在待停止 unit 的 cgroup 内启动 `systemctl` helper；无 `appExit` 的 systemd 兜底改用 manager-owned transient `systemd-run`，最后才退回 detached-helper。客户端按 boot id 确认新进程已恢复后关闭横幅，交由 DSH Web 自身的后台连接重试恢复页面，不强制整页刷新，避免认证/路由切换期间白屏。重启链路已在当前 DSH Web `0.2.0-rc.2` 实机核验（2026-10-01）：dsh-m 探测 unit `Restart=` 策略后经 `appExit` 交还 systemd，`status=75/TEMPFAIL` 退出由 Restart 策略接住自动拉起，服务恢复后页面后台重连、面板全功能可用。历史口径：`0.1.5-rc.1` 时代已核验 `/dshm` ping 与带认证 `303 → 200`；`0.1.2-rc.1` 按契约核对 + 形态探测兜底收录（verified 数组），部署面演进后不再追旧代 live E2E；transient `systemd-run` 兜底仅适用于无 `appExit` 的宿主（受支持代际均提供 `appExit`），保持设计兜底而非发布门槛；连续安装/卸载由 profile 事务测试面（补偿事务、装后守卫等 813 用例）与 0.4.0→0.4.2 连续发布实证覆盖。安装过程实时显示 pnpm 进度（解析 → 下载 → 链接 → 构建）。
 
+### 0.9.13 变更：desktop 角标悬停文案更新（主人拍板）
+
+- 旧文案「当前 DSH profile：{name}（Desktop 首发仅支持只读市场、安装新包与开关）」在 0.9.8 开放升级/卸载/自升级后已过时；按主人拍板改为「**当前生效 Profile**」（en: Active profile）。
+
 ### 0.9.12 变更：0.9.11 的重发
 
 0.9.11 在 npmjs 遭遇幽灵发布：OIDC 发布被受理并 **staged**（CLI exit 0、provenance 已上 Transparency Log），但从未 commit 进注册表——GET 404、同版本重发 409 `Cannot publish over previously staged version`。等待自愈无果后按标准解法换号重发。**内容与 0.9.11 完全一致：设置页「强制刷新」不再连坐社区清单卡。**

package/lib/client.js

@@ -1293,7 +1293,7 @@ var ZH = {
   "restart.timeout": "\u91CD\u542F\u8D85\u65F6\uFF0C\u8BF7\u624B\u52A8\u68C0\u67E5 dsh web \u670D\u52A1\u72B6\u6001",
   "restart.hint.done": "\u5DF2\u8BF7\u6C42\u91CD\u542F DSH web\uFF08via {via}\uFF09\u3002\u670D\u52A1\u6062\u590D\u540E DSH Web \u4F1A\u5728\u540E\u53F0\u81EA\u52A8\u91CD\u8FDE\u3002",
   "profile.restartHint": "\u53D8\u66F4\u5B8C\u6210\u3002Desktop \u63D2\u4EF6\u7531\u5B98\u65B9\u5E94\u7528\u7BA1\u7406\uFF1A\u8BF7\u9000\u51FA\u5E76\u91CD\u65B0\u6253\u5F00 Desktop \u5E94\u7528\uFF08\u5173\u95ED\u7A97\u53E3\u53EF\u80FD\u53EA\u662F\u9690\u85CF\uFF09\u4EE5\u52A0\u8F7D\u65B0\u72B6\u6001\u3002",
-  "profile.chipTitle": "\u5F53\u524D DSH profile\uFF1A{name}\uFF08Desktop \u9996\u53D1\u4EC5\u652F\u6301\u53EA\u8BFB\u5E02\u573A\u3001\u5B89\u88C5\u65B0\u5305\u4E0E\u5F00\u5173\uFF09",
+  "profile.chipTitle": "\u5F53\u524D\u751F\u6548 Profile",
   "selfupdate.available": "\u53D1\u73B0\u65B0\u7248\u672C v{v}\uFF0C\u70B9\u51FB\u5347\u7EA7",
   "selfupdate.ahead": "\u672C\u5730\u5F00\u53D1\u7248\uFF08\u9886\u5148 npm\uFF1Av{v}\uFF09",
   "selfupdate.checking": "\u68C0\u67E5\u66F4\u65B0\u4E2D\u2026",
@@ -1554,7 +1554,7 @@ var EN = {
   "restart.timeout": "Restart timed out \u2014 check the dsh web service manually",
   "restart.hint.done": "Restart requested (via {via}). DSH Web will reconnect in the background after the service returns.",
   "profile.restartHint": "Changes applied. Desktop plugins are managed by the official app: quit and reopen the Desktop app (closing the window may only hide it) to load the new state.",
-  "profile.chipTitle": "Current DSH profile: {name} (Desktop first release supports read-only market, installing new packages, and toggles)",
+  "profile.chipTitle": "Active profile",
   "selfupdate.available": "New version v{v} available \u2014 click to upgrade",
   "selfupdate.ahead": "Local dev build (ahead of npm: v{v})",
   "selfupdate.checking": "Checking for updates\u2026",

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "dsh-m",
-  "version": "0.9.12",
+  "version": "0.9.13",
   "description": "可自定义收录清单的 DSH 插件市场：收录、安装、卸载、升级一站完成，附 agent 工具与 dshm CLI。",
   "license": "MIT",
   "type": "module",