dsh-logicprobe 0.6.4 → 0.6.6

package/README.en-US.md

@@ -24,9 +24,9 @@ The model is always shown as a transition table and **confirmed with the user be
 
 ## Installation
 
-### Marketplace install (recommended)
+### Claude Code install (recommended)
 
-Add the marketplace to `~/.claude/settings.json`:
+Add the marketplace to **Claude Code**'s `~/.claude/settings.json`:
 
 ```json
 {
@@ -44,7 +44,7 @@ Then install from CLI:
 claude plugin install logicprobe@logicprobe
 ```
 
-### Manual install
+### Claude Code manual install
 
 ```bash
 git clone https://github.com/AmethystLuna/logicprobe.git ~/.claude/plugins/dev/logicprobe
@@ -75,7 +75,18 @@ Native dsh support ships as a cordis plugin bundle at the repository root (the r
 - `logicprobe_export`: exports a LogicModelV1 as native input for external tools — UPPAAL (XML `.xta` + queries), TLA+ (TLC module), PRISM (DTMC `.pm` + `.pctl`), SPIN (Promela + ltl) — matching the dimensions covered by `coverageNotes`/gap-routing; exports follow each tool's official syntax so the generated files can be handed straight to the checker (SPIN is verified end-to-end for real).
 - Together with the embedded-workbench bundle's Plan Verification Gate, this closes the claim-verification loop in dsh.
 
-Install: see [`.dsh/INSTALL.md`](.dsh/INSTALL.md) (four options, from plain skill copy to `dsh plugin add`).
+Install (native bundle, recommended):
+
+```bash
+# from npm (package name: dsh-logicprobe)
+dsh plugin --profile web add dsh-logicprobe
+# or from GitHub source
+dsh plugin --profile web add "github:AmethystLuna/logicprobe"
+# when dsh is not installed globally
+npx -p @deepseek-ai/dsh dsh plugin --profile web add dsh-logicprobe
+```
+
+Restart the profile, then run `dsh --profile web --dump-config`: the `id: logicprobe` row must appear with `enabled: true`. More options (plain skill copy, project-level, ...) are in [`.dsh/INSTALL.md`](.dsh/INSTALL.md).
 
 > DSH install note: the package name is `dsh-logicprobe`. In the web profile's `package.json`, both the dependency key and the `dsh.profile.bundles` entry must use the same name; a mismatch causes the dsh loader to fail with `ERR_MODULE_NOT_FOUND`.
 

package/README.md

@@ -22,9 +22,9 @@
 
 ## 安装
 
-### Marketplace 安装（推荐）
+### Claude Code 安装（推荐）
 
-在 `~/.claude/settings.json` 中添加 marketplace：
+在 **Claude Code** 的 `~/.claude/settings.json` 中添加 marketplace：
 
 ```json
 {
@@ -42,7 +42,7 @@
 claude plugin install logicprobe@logicprobe
 ```
 
-### 手动安装
+### Claude Code 手动安装
 
 ```bash
 git clone https://github.com/AmethystLuna/logicprobe.git ~/.claude/plugins/dev/logicprobe
@@ -74,7 +74,18 @@ git clone https://github.com/AmethystLuna/logicprobe.git ~/.claude/plugins/dev/l
 - `logicprobe_concurrency_scan` 扫描文档/计划中的并发风险声称（thread-safe、lock-free、race condition、mutex 等），标记需要专用并发验证。
 - 与 embedded-workbench bundle 的 Plan Verification Gate 配合，在 dsh 中闭环了 claim 验证链路。
 
-安装：参见 [`.dsh/INSTALL.md`](.dsh/INSTALL.md)（四种方式，从纯技能拷贝到 `dsh plugin add`）。
+安装（原生 bundle，推荐）：
+
+```bash
+# 从 npm 安装（包名 dsh-logicprobe）
+dsh plugin --profile web add dsh-logicprobe
+# 或从 GitHub 源码安装
+dsh plugin --profile web add "github:AmethystLuna/logicprobe"
+# 未全局安装 dsh 时可用 npx
+npx -p @deepseek-ai/dsh dsh plugin --profile web add dsh-logicprobe
+```
+
+安装后重启 profile，运行 `dsh --profile web --dump-config` 应看到 `id: logicprobe` 且 `enabled: true`。更多方式（纯技能拷贝、项目级等）见 [`.dsh/INSTALL.md`](.dsh/INSTALL.md)。
 
 > DSH 安装注意：npm 包名为 `dsh-logicprobe`（无 scope）。在 web profile 的 `package.json` 中，依赖键与 `dsh.profile.bundles` 必须写 `dsh-logicprobe`；否则 dsh 加载器会因找不到 `node_modules/dsh-logicprobe` 而启动失败。
 

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "dsh-logicprobe",
-  "version": "0.6.4",
+  "version": "0.6.6",
   "description": "Design document & plan claim verification — enumerate claims, verify against codebase facts, then escalate to state-machine verification (S1-S8/A1-A12, including budget/worst-case path-cost checks) and data-model verification (DS/DA/DD) for behavioral claims. Supports before/after regression, idempotency/monotonic/sequence/leads-to/atomicity constraints, and concurrency risk mining. Ships a native DeepSeek Harness (dsh) bundle that injects the claim-verification gate into the first model step.",
   "type": "module",
   "main": "lib/index.js",
@@ -29,7 +29,7 @@
       "patch": "./cordis.patch.yml"
     },
     "compatibility": {
-      "dsh": "^0.1.0-rc.7 || ^0.1.1-rc.1 || ^0.1.2-alpha.2 || ^0.1.2-alpha.3 || ^0.1.2-alpha.4 || ^0.1.2-alpha.5 || ^0.1.2-rc.1 || ^0.1.3-alpha.1 || ^0.1.3-alpha.2 || ^0.1.5-alpha.1 || ^0.1.5-rc.1",
+      "dsh": "^0.1.0-rc.7 || ^0.1.1-rc.1 || ^0.1.2-alpha.2 || ^0.1.2-alpha.3 || ^0.1.2-alpha.4 || ^0.1.2-alpha.5 || ^0.1.2-rc.1 || ^0.1.3-alpha.1 || ^0.1.3-alpha.2 || ^0.1.5-alpha.1 || ^0.1.5-rc.1 || ^0.1.5-alpha.2 || ^0.1.5-rc.2 || ^0.1.6-alpha.1",
       "dshReleases": {
         "0.1.0-rc.7": "compatible",
         "0.1.0-rc.8": "compatible",
@@ -43,7 +43,10 @@
         "0.1.3-alpha.1": "compatible",
         "0.1.3-alpha.2": "compatible",
         "0.1.5-alpha.1": "compatible",
-        "0.1.5-rc.1": "compatible"
+        "0.1.5-alpha.2": "compatible",
+        "0.1.5-rc.1": "compatible",
+        "0.1.5-rc.2": "compatible",
+        "0.1.6-alpha.1": "compatible"
       },
       "profiles": [
         "headless"
@@ -81,7 +84,7 @@
     "@deepseek-ai/dsh-timeout": "^0.1.0-rc.6",
     "@deepseek-ai/dsh-tools": "^0.1.0-rc.6",
     "@deepseek-ai/schemastery": "^3.18.2",
-    "@types/node": "^26.4.1",
+    "@types/node": "^26.5.0",
     "typescript": "^7.0.2"
   },
   "author": {