dsh-lead-mode 0.2.1 → 0.2.3

package/README.md

@@ -101,10 +101,10 @@ The model will not pretend it can delegate, and it will not pass `subagent` off
 Lead mode delegates through `spawn_teammate`, `send_message`, and `team_task_*`. Those come from the official dsh Team runtime, which this plugin does not ship.
 
 ```bash
-dsh plugin --profile <your profile name> add @deepseek-ai/dsh-experimental-agent-team-profile@0.2.1-rc.3
+dsh plugin --profile <your profile name> add @deepseek-ai/dsh-experimental-agent-team-profile@0.2.2-rc.1
 ```
 
-**The version pin is required.** Without it npm resolves `latest`, which is 0.1.5-alpha.2 — built for 0.1.x hosts and it will not mount on a 0.2.1 host. `next` points at 0.2.1-rc.3, which is the correct one. Restart dsh afterwards.
+**The version pin is required.** Without it npm resolves `latest`, which is 0.1.5-alpha.2 — built for 0.1.x hosts and it will not mount on a 0.2.2 host. `next` points at 0.2.2-rc.1, which is the correct one. The pin also has to equal your host version (`dsh --version`): the team packages pin exact `dsh-*` peers, so an older rc installs a peer set the newer host does not satisfy. Restart dsh afterwards.
 
 Not sure whether it is installed? Run `/lead-mode` in dsh; it reports dependency state.
 
@@ -181,15 +181,15 @@ This plugin ships none of the packages below. The host or an official bundle pro
 
 | Package | Requirement | Provided by | When missing |
 |---|---|---|---|
-| `@deepseek-ai/dsh-experimental-agent-team-profile` | `0.2.1-rc.3` | You install it explicitly | Cannot delegate; `/lead-mode` returns error; startup warn |
-| `@deepseek-ai/dsh` | `>=0.2.1-rc.2` | Host | Will not install |
+| `@deepseek-ai/dsh-experimental-agent-team-profile` | `0.2.2-rc.1` | You install it explicitly | Cannot delegate; `/lead-mode` returns error; startup warn |
+| `@deepseek-ai/dsh` | `>=0.2.2-rc.1` | Host | Will not install |
 | `@deepseek-ai/cordis` | `^4.0.5` | Host | Will not install |
 | `@deepseek-ai/schemastery` | `^3.18.5` | Host | Will not install |
-| `@deepseek-ai/dsh-agent-preset-registry` | `>=0.2.1-rc.2` | Host | Preset row does not take effect; `/lead-mode` reports unknown |
-| `@deepseek-ai/dsh-skill` | `>=0.2.1-rc.2` | Host | Skill not registered; startup warn |
-| `@deepseek-ai/dsh-commands` | `>=0.2.1-rc.2` | Host | `/lead-mode` not registered; startup warn |
+| `@deepseek-ai/dsh-agent-preset-registry` | `>=0.2.2-rc.1` | Host | Preset row does not take effect; `/lead-mode` reports unknown |
+| `@deepseek-ai/dsh-skill` | `>=0.2.2-rc.1` | Host | Skill not registered; startup warn |
+| `@deepseek-ai/dsh-commands` | `>=0.2.2-rc.1` | Host | `/lead-mode` not registered; startup warn |
 
-The target host version is `dshTarget` in `package.json`: `0.2.1-rc.3`.
+The target host version is `dshTarget` in `package.json`: `0.2.2-rc.1`.
 
 ## Why the install command pins a version
 
@@ -198,10 +198,10 @@ The target host version is `dshTarget` in `package.json`: `0.2.1-rc.3`.
 | dist-tag | Version | Host it fits |
 |---|---|---|
 | `latest` | 0.1.5-alpha.2 | 0.1.x |
-| `alpha` | 0.2.1-alpha.5 | the 0.2.1 prerelease line |
-| `next` | 0.2.1-rc.3 | 0.2.1 |
+| `alpha` | 0.2.2-alpha.3 | an earlier preview of the 0.2.2 line |
+| `next` | 0.2.2-rc.1 | 0.2.2 |
 
-Bare package name resolves `latest`, which installs 0.1.5-alpha.2. That build targets 0.1.x hosts and does not mount on a 0.2.1 host. After installing it, no Team tools appear in dsh and `/lead-mode` still reports "not mounted".
+Bare package name resolves `latest`, which installs 0.1.5-alpha.2. That build targets 0.1.x hosts and does not mount on a 0.2.2 host. After installing it, no Team tools appear in dsh and `/lead-mode` still reports "not mounted".
 
 Measured on 2026-10-26 with npm 11.20.0:
 
@@ -210,9 +210,9 @@ $ npm view @deepseek-ai/dsh-experimental-agent-team-profile version
 0.1.5-alpha.2
 ```
 
-So every install command in this plugin carries `@0.2.1-rc.3`: the persona prefix, the `/lead-mode` output, the startup warn, and SKILL.md. `test/preset.test.mjs` and `test/smoke.test.mjs` both assert that string, so a future edit cannot quietly drop back to the bare name.
+So every install command in this plugin carries `@0.2.2-rc.1`: the persona prefix, the `/lead-mode` output, the startup warn, and SKILL.md. `test/preset.test.mjs` and `test/smoke.test.mjs` both assert that string, so a future edit cannot quietly drop back to the bare name.
 
-For the `alpha` line, pin `@0.2.1-alpha.5` yourself; do not use the bare name.
+`next` now points at `0.2.2-rc.1`, the build this plugin pins; `alpha` (`0.2.2-alpha.3`) is an earlier preview of the same line.
 
 ## Difference from the official standard preset
 
@@ -223,7 +223,7 @@ One place only: the persona. The other 21 rows are copied field for field from `
 | persona prefix | `You are a coding agent powered by the {{model}} model.` | Chinese Lead persona plus an Agent Teams precondition check |
 | other 21 rows | — | identical to standard, field for field |
 
-The four classic subagent rows (`tool-subagent-control`, `tool-subagent-list-agents`, `tool-subagent`, `tool-subagent-fork`) stay enabled. Nothing is disabled. The Team tools are a host decision, not a preset decision.
+The three classic subagent rows (`tool-subagent-control`, `tool-subagent`, `tool-subagent-fork`) stay enabled. `list_agents` now comes from `tool-subagent-control` itself, so there is no separate row for it. Nothing is disabled. The Team tools are a host decision, not a preset decision.
 
 ## Why the preset does not carry the Team runtime
 

package/README.zh-CN.md

@@ -101,10 +101,10 @@
 Lead 模式靠 `spawn_teammate`、`send_message`、`team_task_*` 这些工具派活。它们由 dsh 官方的 Team 运行时提供，本插件不带。
 
 ```bash
-dsh plugin --profile <你的 profile 名> add @deepseek-ai/dsh-experimental-agent-team-profile@0.2.1-rc.3
+dsh plugin --profile <你的 profile 名> add @deepseek-ai/dsh-experimental-agent-team-profile@0.2.2-rc.1
 ```
 
-**必须带版本号。** 不带会装到 `latest` 上的 0.1.5-alpha.2，那是给 0.1.x 宿主用的，在 0.2.1 宿主上挂不上。`next` 指向的 0.2.1-rc.3 才对。装完重启 dsh。
+**必须带版本号。** 不带会装到 `latest` 上的 0.1.5-alpha.2，那是给 0.1.x 宿主用的，在 0.2.2 宿主上挂不上。`next` 指向的 0.2.2-rc.1 才对。版本号还要等于你的宿主版本（`dsh --version`）：团队包把 `dsh-*` 的 peer 钉死到具体版本，老 rc 装到新宿主上，peer 对不上。装完重启 dsh。
 
 不确定装没装？进 dsh 敲 `/lead-mode`，它会报依赖状态。
 
@@ -181,15 +181,15 @@ Lead 模式 skill 里也写了这个入口，所以派活时模型会直接让
 
 | 包 | 版本要求 | 谁提供 | 缺了会怎样 |
 |---|---|---|---|
-| `@deepseek-ai/dsh-experimental-agent-team-profile` | `0.2.1-rc.3` | 用户显式安装 | 派不了活，`/lead-mode` 报 error，启动 warn |
-| `@deepseek-ai/dsh` | `>=0.2.1-rc.2` | 宿主 | 装不上 |
+| `@deepseek-ai/dsh-experimental-agent-team-profile` | `0.2.2-rc.1` | 用户显式安装 | 派不了活，`/lead-mode` 报 error，启动 warn |
+| `@deepseek-ai/dsh` | `>=0.2.2-rc.1` | 宿主 | 装不上 |
 | `@deepseek-ai/cordis` | `^4.0.5` | 宿主 | 装不上 |
 | `@deepseek-ai/schemastery` | `^3.18.5` | 宿主 | 装不上 |
-| `@deepseek-ai/dsh-agent-preset-registry` | `>=0.2.1-rc.2` | 宿主 | 预设行不生效，`/lead-mode` 报「查不到」 |
-| `@deepseek-ai/dsh-skill` | `>=0.2.1-rc.2` | 宿主 | skill 不注册，启动 warn |
-| `@deepseek-ai/dsh-commands` | `>=0.2.1-rc.2` | 宿主 | `/lead-mode` 不注册，启动 warn |
+| `@deepseek-ai/dsh-agent-preset-registry` | `>=0.2.2-rc.1` | 宿主 | 预设行不生效，`/lead-mode` 报「查不到」 |
+| `@deepseek-ai/dsh-skill` | `>=0.2.2-rc.1` | 宿主 | skill 不注册，启动 warn |
+| `@deepseek-ai/dsh-commands` | `>=0.2.2-rc.1` | 宿主 | `/lead-mode` 不注册，启动 warn |
 
-目标宿主版本写在 `package.json` 的 `dshTarget` 字段：`0.2.1-rc.3`。
+目标宿主版本写在 `package.json` 的 `dshTarget` 字段：`0.2.2-rc.1`。
 
 ## 为什么安装命令要带版本号
 
@@ -198,10 +198,10 @@ Lead 模式 skill 里也写了这个入口，所以派活时模型会直接让
 | dist-tag | 版本 | 配哪个宿主 |
 |---|---|---|
 | `latest` | 0.1.5-alpha.2 | 0.1.x |
-| `alpha` | 0.2.1-alpha.5 | 0.2.1 预发布线 |
-| `next` | 0.2.1-rc.3 | 0.2.1 |
+| `alpha` | 0.2.2-alpha.3 | 0.2.2 线早期预览 |
+| `next` | 0.2.2-rc.1 | 0.2.2 |
 
-裸写包名，npm 解析 `latest`，装到 0.1.5-alpha.2。这个版本是给 0.1.x 宿主用的，在 0.2.1 宿主上挂不上。装完 dsh 里看不到 Team 工具，`/lead-mode` 还是报「未挂载」。
+裸写包名，npm 解析 `latest`，装到 0.1.5-alpha.2。这个版本是给 0.1.x 宿主用的，在 0.2.2 宿主上挂不上。装完 dsh 里看不到 Team 工具，`/lead-mode` 还是报「未挂载」。
 
 实测（2026-10-26，npm 11.20.0）：
 
@@ -210,9 +210,9 @@ $ npm view @deepseek-ai/dsh-experimental-agent-team-profile version
 0.1.5-alpha.2
 ```
 
-所以本插件里所有出现安装命令的地方都带 `@0.2.1-rc.3`：persona prefix、`/lead-mode` 输出、启动 warn、SKILL.md。`test/preset.test.mjs` 与 `test/smoke.test.mjs` 都断言这个字符串在，防止以后被改回裸包名。
+所以本插件里所有出现安装命令的地方都带 `@0.2.2-rc.1`：persona prefix、`/lead-mode` 输出、启动 warn、SKILL.md。`test/preset.test.mjs` 与 `test/smoke.test.mjs` 都断言这个字符串在，防止以后被改回裸包名。
 
-要装 `alpha` 线的话自己换成 `@0.2.1-alpha.5`，别用裸名。
+`next` 现在指向 `0.2.2-rc.1`，就是本插件钉的版本；`alpha`（`0.2.2-alpha.3`）是同一条线的早期预览。
 
 ## 与官方 standard 预设的差异
 
@@ -223,7 +223,7 @@ $ npm view @deepseek-ai/dsh-experimental-agent-team-profile version
 | persona prefix | `You are a coding agent powered by the {{model}} model.` | 中文 Lead 人设 + Agent Teams 前置检查 |
 | 其余 21 行 | — | 与 standard 逐字段相同 |
 
-classic subagent 四行（`tool-subagent-control`、`tool-subagent-list-agents`、`tool-subagent`、`tool-subagent-fork`）保持启用，没有禁用。Team 工具由 host 决定，不由预设决定。
+classic subagent 三行（`tool-subagent-control`、`tool-subagent`、`tool-subagent-fork`）保持启用，没有禁用。`list_agents` 现在由 `tool-subagent-control` 自己注册，不再单列一行。Team 工具由 host 决定，不由预设决定。
 
 ## 为什么预设里不塞 Team 运行时
 

package/cordis.patch.yml

@@ -16,10 +16,13 @@
 # agent, so it belongs to the host plane, not to a preset row. Users turn it on
 # with the official profile package:
 #
-#   dsh plugin --profile <name> add @deepseek-ai/dsh-experimental-agent-team-profile@0.2.1-rc.3
+#   dsh plugin --profile <name> add @deepseek-ai/dsh-experimental-agent-team-profile@0.2.2-rc.1
 #
 # The version pin matters: bare `npm i` resolves `latest`, which is 0.1.5-alpha.2
-# and does not mount on a 0.2.1 host. `next` points at 0.2.1-rc.3.
+# and does not mount on a 0.2.2 host. `next` points at 0.2.2-rc.1. The pin must
+# equal the host version (`dsh --version`): the team packages pin exact `dsh-*`
+# peers, so a profile built for an older rc installs peers this host does not
+# satisfy.
 - insert:
     - id: dsh-lead-mode
       name: 'dsh-lead-mode'
@@ -41,9 +44,9 @@
 
                 没有的话，停下。只做一件事：告诉用户去开 dsh 官方的 Agent Teams，命令是
 
-                    dsh plugin --profile <你的 profile 名> add @deepseek-ai/dsh-experimental-agent-team-profile@0.2.1-rc.3
+                    dsh plugin --profile <你的 profile 名> add @deepseek-ai/dsh-experimental-agent-team-profile@0.2.2-rc.1
 
-                不带版本号会装到 0.1.5-alpha.2，和 0.2.1 宿主对不上。装完重启 dsh。
+                不带版本号会装到 0.1.5-alpha.2，和 0.2.2 宿主对不上。版本号要跟 `dsh --version` 的输出一致。装完重启 dsh。
 
                 这是本插件存在的主要理由。没有这些工具，你派不了活。不要自己硬干，不要假装能派活，也不要拿 subagent 凑数顶替 teammate。
 
@@ -73,6 +76,9 @@
             disabled: !!js process.platform !== 'win32'
           - id: tool-fs
             name: '@deepseek-ai/dsh-tool-fs'
+            config:
+              # 0.2.2 起 apply_patch 默认开启。standard 显式关掉，这里跟着关。
+              applyPatch: false
           - id: tool-fs-search
             name: '@deepseek-ai/dsh-tool-fs-search'
             config:
@@ -135,14 +141,13 @@
             config:
               - id: tool-subagent-control
                 name: '@deepseek-ai/dsh-tool-subagent-control'
-              - id: tool-subagent-list-agents
-                name: '@deepseek-ai/dsh-tool-subagent-control/list-agents'
               - id: tool-subagent
                 name: '@deepseek-ai/dsh-tool-subagent'
                 config:
                   provider: spawn
                   toolName: subagent
-                  modelSelectionSettings: true
+                  modelSelection: true
+                  modelDiscovery: true
               - id: tool-subagent-fork
                 name: '@deepseek-ai/dsh-tool-subagent'
                 config:
@@ -169,7 +174,7 @@
             name: '@deepseek-ai/dsh-tool-present'
           - id: tool-plugin-manager
             name: '@deepseek-ai/dsh-plugin-manager/tools'
-            disabled: true
+            disabled: !!js "!ctx.get('profileContext')"
           - id: tool-plugin-market
             name: '@deepseek-ai/dsh-plugin-market/tools'
             disabled: true

package/lib/index.js

@@ -20,14 +20,21 @@ import { fileURLToPath } from 'node:url'
 /** Cordis plugin name. */
 export const name = 'lead-mode'
 
-/** Profile package that provides the Team runtime, pinned to the rc.3 line. */
-const TEAM_PROFILE_PACKAGE = '@deepseek-ai/dsh-experimental-agent-team-profile@0.2.1-rc.3'
+/**
+ * Profile package that provides the Team runtime.
+ *
+ * The pin has to match the host version line: the team packages declare exact
+ * `@deepseek-ai/dsh-*` peers, so an older profile on a newer host installs an
+ * unsatisfied peer set. Bump this constant together with `engines.dsh` and
+ * `dshTarget` whenever the target host line moves.
+ */
+const TEAM_PROFILE_PACKAGE = '@deepseek-ai/dsh-experimental-agent-team-profile@0.2.2-rc.1'
 
 /** Install command shown in every reminder. */
 const ENABLE_COMMAND = `dsh plugin --profile <你的 profile 名> add ${TEAM_PROFILE_PACKAGE}`
 
 /** Why the version pin matters, repeated wherever the command appears. */
-const VERSION_NOTE = '不带版本号会装到 0.1.5-alpha.2，和 0.2.1 宿主对不上。'
+const VERSION_NOTE = '不带版本号会装到 0.1.5-alpha.2，和 0.2.1 宿主对不上。版本号要跟 `dsh --version` 的输出一致。'
 
 /** Directory holding one subdirectory per bundled skill; the directory name is the skill name. */
 const SKILLS_DIR = new URL('../skills/', import.meta.url)

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "dsh-lead-mode",
-  "version": "0.2.1",
+  "version": "0.2.3",
   "description": "Lead mode for DSH: an agent preset, a working-method skill, a dependency self-check, and two reminders that tell you to enable the official Agent Teams. | 给 DSH 加 Lead 模式：预设、skill、依赖自检、两条前置提醒。",
   "type": "module",
   "main": "lib/index.js",
@@ -16,11 +16,16 @@
     "README.zh-CN.md",
     "LICENSE"
   ],
+  "scripts": {
+    "test": "node --test test/*.test.mjs",
+    "check": "node --check lib/index.js && node scripts/validate-names.mjs --manifest ./dsh-plugin.naming.json && node scripts/check-patch.mjs",
+    "pack:dry": "npm pack --dry-run"
+  },
   "engines": {
     "node": ">=20",
-    "dsh": ">=0.2.1-rc.2"
+    "dsh": ">=0.2.2-rc.1"
   },
-  "dshTarget": "0.2.1-rc.3",
+  "dshTarget": "0.2.2-rc.1",
   "dsh": {
     "bundle": {
       "patch": "./cordis.patch.yml"
@@ -42,10 +47,10 @@
   "license": "MIT",
   "peerDependencies": {
     "@deepseek-ai/cordis": "^4.0.5",
-    "@deepseek-ai/dsh": ">=0.2.1-rc.2",
+    "@deepseek-ai/dsh": ">=0.2.2-rc.1",
     "@deepseek-ai/schemastery": "^3.18.5",
-    "@deepseek-ai/dsh-agent-preset-registry": ">=0.2.1-rc.2",
-    "@deepseek-ai/dsh-skill": ">=0.2.1-rc.2",
-    "@deepseek-ai/dsh-commands": ">=0.2.1-rc.2"
+    "@deepseek-ai/dsh-agent-preset-registry": ">=0.2.2-rc.1",
+    "@deepseek-ai/dsh-skill": ">=0.2.2-rc.1",
+    "@deepseek-ai/dsh-commands": ">=0.2.2-rc.1"
   }
 }

package/skills/lead-mode/SKILL.md

@@ -14,10 +14,10 @@ description: Lead 工作法。当你要拆活、派活给 teammate、用共享
 没有就停下。只做一件事：让用户去开 dsh 官方 Agent Teams，命令是
 
 ```
-dsh plugin --profile <你的 profile 名> add @deepseek-ai/dsh-experimental-agent-team-profile@0.2.1-rc.3
+dsh plugin --profile <你的 profile 名> add @deepseek-ai/dsh-experimental-agent-team-profile@0.2.2-rc.1
 ```
 
-不带版本号会装到 0.1.5-alpha.2，和 0.2.1 宿主对不上。
+不带版本号会装到 0.1.5-alpha.2，和 0.2.2 宿主对不上。版本号要跟 `dsh --version` 的输出一致。
 
 不要自己硬干，也不要假装能派活。
 
@@ -204,7 +204,7 @@ teammate 继承你（Lead）在 spawn 那一刻的 provider 和 model。想换
 | 整队换模型 | 切 Lead 自己的模型。之后新 spawn 的 teammate 跟着变 |
 | 按任务挑模型 | 用不了 team，改用经典 `subagent` 工具 |
 
-经典 `subagent` 支持 `provider`、`model`、`reasoning_effort`、`agent_preset` 四个参数（本插件预设已开 `modelSelectionSettings`）。
+经典 `subagent` 支持 `provider`、`model`、`reasoning_effort`、`agent_preset` 四个参数（本插件预设已开 `modelSelection` 与 `modelDiscovery`）。
 
 代价说清楚：经典 `subagent` 是一次性子代理，没有共享任务板，没有持久身份。要用团队就得接受统一模型。