dsh-input-traffic 0.7.6 → 0.7.8

package/CHANGELOG.md

@@ -1,5 +1,38 @@
 # Changelog
 
+## 0.7.7 (2026-10-27)
+
+两条外部 issue（feidky）的修复；无宿主兼容面变更，`engines.dsh` 枚举与 peers 保持 0.7.6。
+
+### 修复：多条排队时自动折叠，与用户抢开关（issue #4）
+
+- 多条排队**默认展开**（`listVisible` 仍保留单条直显）：排队信息的价值就是看得见。
+- 删除「队列清空 → `setCollapsed(true)`」的自动收回 effect；折叠态只由用户手动决定。
+- 持久化键升 v2（`dsh-input-traffic:collapsed:v2`）：v1 的值含自动折叠写入的结果，
+  不是用户选择，不能压过新默认值。
+- `collapseTouched` latch：未手动点过表头前**不写存储**，避免首帧把默认值物化成决定。
+
+### 修复：红档「打断并输入」在多条排队时投了队首行（issue #3）
+
+- 根因（确定性，非竞态）：宿主唤醒只经 `followup`，而 `followup` 永远追加到 `next-turn`
+  尾部（`agent.ts` `inbox.splice(…, Infinity, …)`），唤醒后 driver 按 FIFO 取**队首**。
+  旧实现 `cancel → remove(目标) → send(目标)` 让目标落在队尾，被消费的是队首。
+  另：`conversation.send()` 的 mode 硬编码为 `queue`，与 `busyEnter` 设置无关。
+- 新流程：`cancel`（宿主 park 队列，收敛期不 claim）→ 摘出全部其它行 →
+  `send(目标)`（此时唯一，即队首）→ 其余行按原序重投。
+- 语义：红档只投入当条；其余行（含黄档插入行）统一降级回绿色等待档——
+  被打断的回合不存在「下一个 step」可插入。
+- 顺序：`cancel` 提到最前，所有摘取都发生在 park 之后，去掉「摘到一半被消费」的窗口。
+- `send(目标)` 失败时仍恢复其余排队行（try/finally），不吞队列；
+  `queue-item-not-found` 视为已被宿主取走，该行不重投（避免重复投递）。
+
+### 限制：附件行仍锁红档
+
+- 重投只有 `send(text)` 一条通道：`file` 块的 `receiptId` 一次性、无反向解析；
+  图片需 `readAttachment` 回读字节（未实现）。
+- 因此待处理行含非文本内容时**整队**红档禁用（不只那一条），文案改为队列口径（9 语）。
+- 根治需宿主提供队列位置操作（`move` / `prepend`），届时红档与重排的附件锁可一并解除。
+
 0.7.6: host enumeration addendum for DSH 0.2.1-rc.3 (declaration-only bump; contract plane zero diff).
 
 ## 0.7.5 (2026-10-18)

package/README.en.md

@@ -52,7 +52,7 @@ A cordis client plugin assembled via the `dsh plugin` command and a bundle patch
 > **Suggested pairing for now**: use it together with a **reminder** plugin (e.g. [dsh-notify](https://github.com/zhengjy01/dsh-notify), desktop notifications when it is time to freeze/resume) and a **billing/usage** plugin (e.g. [dsh-deepseek-usage](https://github.com/yyb16yyb-hub/dsh-deepseek-usage), [dsh-cost-tracker](https://github.com/yflmq001/dsh-cost-tracker), [dsh-billing-balance](https://github.com/YZz-S/dsh-billing-balance), to verify actual spend around a freeze) — a "remind → freeze → resume off-peak → verify" saving loop.
 
 <!-- host-compat:begin — generated by scripts/sync-hosts.mjs from scripts/hosts.mjs; DO NOT EDIT -->
-- **Supported DSH hosts:** `0.1.0-rc.2` `0.1.0-rc.3` `0.1.0-rc.6` `0.1.0-rc.7` `0.1.0-rc.8` `0.1.1-rc.1` `0.1.1-rc.2` `0.1.2-rc.1` `0.1.5-rc.1` `0.1.5-rc.2` `0.1.5-rc.3` `0.1.7-rc.1` `0.1.7-rc.2` `0.2.0-rc.1` `0.2.0-rc.2` `0.2.1-rc.1` `0.2.1-rc.2` `0.2.1-rc.3` (18 rc releases across lines 0.1.0 / 0.1.1 / 0.1.2 / 0.1.5 / 0.1.7 / 0.2.0 / 0.2.1)
+- **Supported DSH hosts:** `0.1.0-rc.2` `0.1.0-rc.3` `0.1.0-rc.6` `0.1.0-rc.7` `0.1.0-rc.8` `0.1.1-rc.1` `0.1.1-rc.2` `0.1.2-rc.1` `0.1.5-rc.1` `0.1.5-rc.2` `0.1.5-rc.3` `0.1.7-rc.1` `0.1.7-rc.2` `0.2.0-rc.1` `0.2.0-rc.2` `0.2.1-rc.1` `0.2.1-rc.2` `0.2.1-rc.3` `0.2.1-rc.4` (19 rc releases across lines 0.1.0 / 0.1.1 / 0.1.2 / 0.1.5 / 0.1.7 / 0.2.0 / 0.2.1)
 - **Runtime-verified:** `0.1.0-rc.2`, `0.1.0-rc.3`, `0.1.0-rc.6`, `0.1.0-rc.7`, `0.1.0-rc.8`, `0.1.1-rc.1`, `0.1.1-rc.2`, `0.1.2-rc.1`, `0.1.5-rc.1`, `0.1.5-rc.2`, `0.1.5-rc.3`, `0.1.7-rc.1`, `0.1.7-rc.2`, `0.2.0-rc.1`, `0.2.0-rc.2` — evidence in `.compat-results/`
 <!-- host-compat:end -->
 

package/README.ja.md

@@ -35,7 +35,7 @@
 > **推奨セットアップ**：**リマインダー**プラグイン（[dsh-notify](https://github.com/zhengjy01/dsh-notify) など、凍結/再開のタイミングをデスクトップ通知）と**課金統計**プラグイン（[dsh-deepseek-usage](https://github.com/yyb16yyb-hub/dsh-deepseek-usage)、[dsh-cost-tracker](https://github.com/yflmq001/dsh-cost-tracker)、[dsh-billing-balance](https://github.com/YZz-S/dsh-billing-balance) など、凍結前後の実際の支出を確認）を組み合わせ、「リマインド → 凍結 → オフピーク再開 → 精算」の節約ループを実現します。
 
 <!-- host-compat:begin — generated by scripts/sync-hosts.mjs from scripts/hosts.mjs; DO NOT EDIT -->
-- **対応する DSH ホスト:** `0.1.0-rc.2` `0.1.0-rc.3` `0.1.0-rc.6` `0.1.0-rc.7` `0.1.0-rc.8` `0.1.1-rc.1` `0.1.1-rc.2` `0.1.2-rc.1` `0.1.5-rc.1` `0.1.5-rc.2` `0.1.5-rc.3` `0.1.7-rc.1` `0.1.7-rc.2` `0.2.0-rc.1` `0.2.0-rc.2` `0.2.1-rc.1` `0.2.1-rc.2` `0.2.1-rc.3`（0.1.0 / 0.1.1 / 0.1.2 / 0.1.5 / 0.1.7 / 0.2.0 / 0.2.1 の 18 rc）
+- **対応する DSH ホスト:** `0.1.0-rc.2` `0.1.0-rc.3` `0.1.0-rc.6` `0.1.0-rc.7` `0.1.0-rc.8` `0.1.1-rc.1` `0.1.1-rc.2` `0.1.2-rc.1` `0.1.5-rc.1` `0.1.5-rc.2` `0.1.5-rc.3` `0.1.7-rc.1` `0.1.7-rc.2` `0.2.0-rc.1` `0.2.0-rc.2` `0.2.1-rc.1` `0.2.1-rc.2` `0.2.1-rc.3` `0.2.1-rc.4`（0.1.0 / 0.1.1 / 0.1.2 / 0.1.5 / 0.1.7 / 0.2.0 / 0.2.1 の 19 rc）
 - **ランタイム検証済み:** `0.1.0-rc.2`, `0.1.0-rc.3`, `0.1.0-rc.6`, `0.1.0-rc.7`, `0.1.0-rc.8`, `0.1.1-rc.1`, `0.1.1-rc.2`, `0.1.2-rc.1`, `0.1.5-rc.1`, `0.1.5-rc.2`, `0.1.5-rc.3`, `0.1.7-rc.1`, `0.1.7-rc.2`, `0.2.0-rc.1`, `0.2.0-rc.2`（証跡は `.compat-results/`）
 <!-- host-compat:end -->
 

package/README.ko.md

@@ -35,7 +35,7 @@
 > **권장 구성**: **알림** 플러그인([dsh-notify](https://github.com/zhengjy01/dsh-notify), 동결/재개 시점 데스크톱 알림)과 **과금 통계** 플러그인([dsh-deepseek-usage](https://github.com/yyb16yyb-hub/dsh-deepseek-usage), [dsh-cost-tracker](https://github.com/yflmq001/dsh-cost-tracker), [dsh-billing-balance](https://github.com/YZz-S/dsh-billing-balance), 동결 전후 실제 지출 확인)을 함께 사용하여 "알림 → 동결 → 오피크 재개 → 정산" 절약 루ープ를 실현합니다.
 
 <!-- host-compat:begin — generated by scripts/sync-hosts.mjs from scripts/hosts.mjs; DO NOT EDIT -->
-- **지원하는 DSH 호스트:** `0.1.0-rc.2` `0.1.0-rc.3` `0.1.0-rc.6` `0.1.0-rc.7` `0.1.0-rc.8` `0.1.1-rc.1` `0.1.1-rc.2` `0.1.2-rc.1` `0.1.5-rc.1` `0.1.5-rc.2` `0.1.5-rc.3` `0.1.7-rc.1` `0.1.7-rc.2` `0.2.0-rc.1` `0.2.0-rc.2` `0.2.1-rc.1` `0.2.1-rc.2` `0.2.1-rc.3` (0.1.0 / 0.1.1 / 0.1.2 / 0.1.5 / 0.1.7 / 0.2.0 / 0.2.1 라인의 18개 rc)
+- **지원하는 DSH 호스트:** `0.1.0-rc.2` `0.1.0-rc.3` `0.1.0-rc.6` `0.1.0-rc.7` `0.1.0-rc.8` `0.1.1-rc.1` `0.1.1-rc.2` `0.1.2-rc.1` `0.1.5-rc.1` `0.1.5-rc.2` `0.1.5-rc.3` `0.1.7-rc.1` `0.1.7-rc.2` `0.2.0-rc.1` `0.2.0-rc.2` `0.2.1-rc.1` `0.2.1-rc.2` `0.2.1-rc.3` `0.2.1-rc.4` (0.1.0 / 0.1.1 / 0.1.2 / 0.1.5 / 0.1.7 / 0.2.0 / 0.2.1 라인의 19개 rc)
 - **런타임 검증됨:** `0.1.0-rc.2`, `0.1.0-rc.3`, `0.1.0-rc.6`, `0.1.0-rc.7`, `0.1.0-rc.8`, `0.1.1-rc.1`, `0.1.1-rc.2`, `0.1.2-rc.1`, `0.1.5-rc.1`, `0.1.5-rc.2`, `0.1.5-rc.3`, `0.1.7-rc.1`, `0.1.7-rc.2`, `0.2.0-rc.1`, `0.2.0-rc.2` (증적은 `.compat-results/`)
 <!-- host-compat:end -->
 

package/README.md

@@ -57,7 +57,7 @@
 > **目前建议搭配**：配合**一般提醒**插件（如 [dsh-notify](https://github.com/zhengjy01/dsh-notify)，到点桌面提醒「该冻结/该恢复」）与**计费统计**插件（如 [dsh-deepseek-usage](https://github.com/yyb16yyb-hub/dsh-deepseek-usage)、[dsh-cost-tracker](https://github.com/yflmq001/dsh-cost-tracker)、[dsh-billing-balance](https://github.com/YZz-S/dsh-billing-balance)，核对冻结前后的实际花费），形成「提醒 → 冻结 → 错峰恢复 → 对账」的省钱闭环。
 
 <!-- host-compat:begin — generated by scripts/sync-hosts.mjs from scripts/hosts.mjs; DO NOT EDIT -->
-- **支持的 DSH 宿主：** `0.1.0-rc.2` `0.1.0-rc.3` `0.1.0-rc.6` `0.1.0-rc.7` `0.1.0-rc.8` `0.1.1-rc.1` `0.1.1-rc.2` `0.1.2-rc.1` `0.1.5-rc.1` `0.1.5-rc.2` `0.1.5-rc.3` `0.1.7-rc.1` `0.1.7-rc.2` `0.2.0-rc.1` `0.2.0-rc.2` `0.2.1-rc.1` `0.2.1-rc.2` `0.2.1-rc.3`（覆盖 0.1.0 / 0.1.1 / 0.1.2 / 0.1.5 / 0.1.7 / 0.2.0 / 0.2.1 共 7 条线 18 个 rc）
+- **支持的 DSH 宿主：** `0.1.0-rc.2` `0.1.0-rc.3` `0.1.0-rc.6` `0.1.0-rc.7` `0.1.0-rc.8` `0.1.1-rc.1` `0.1.1-rc.2` `0.1.2-rc.1` `0.1.5-rc.1` `0.1.5-rc.2` `0.1.5-rc.3` `0.1.7-rc.1` `0.1.7-rc.2` `0.2.0-rc.1` `0.2.0-rc.2` `0.2.1-rc.1` `0.2.1-rc.2` `0.2.1-rc.3` `0.2.1-rc.4`（覆盖 0.1.0 / 0.1.1 / 0.1.2 / 0.1.5 / 0.1.7 / 0.2.0 / 0.2.1 共 7 条线 19 个 rc）
 - **运行时已验证：** `0.1.0-rc.2`, `0.1.0-rc.3`, `0.1.0-rc.6`, `0.1.0-rc.7`, `0.1.0-rc.8`, `0.1.1-rc.1`, `0.1.1-rc.2`, `0.1.2-rc.1`, `0.1.5-rc.1`, `0.1.5-rc.2`, `0.1.5-rc.3`, `0.1.7-rc.1`, `0.1.7-rc.2`, `0.2.0-rc.1`, `0.2.0-rc.2`（证据见 `.compat-results/`）
 <!-- host-compat:end -->
 

package/dsh.plugin.json

@@ -1,10 +1,10 @@
 {
   "id": "dsh-external/dsh-input-traffic",
-  "version": "0.7.6",
+  "version": "0.7.8",
   "main": "./lib/index.js",
   "description": "Busy-time input queue: three-tier planning, drag-to-reorder, interject/interrupt, batch clear, session freeze.",
   "engines": {
-    "dsh": "0.1.0-rc.2 || 0.1.0-rc.3 || 0.1.0-rc.6 || 0.1.0-rc.7 || 0.1.0-rc.8 || 0.1.1-rc.1 || 0.1.1-rc.2 || 0.1.2-rc.1 || 0.1.5-rc.1 || 0.1.5-rc.2 || 0.1.5-rc.3 || 0.1.7-rc.1 || 0.1.7-rc.2 || 0.2.0-rc.1 || 0.2.0-rc.2 || 0.2.1-rc.1 || 0.2.1-rc.2 || 0.2.1-rc.3"
+    "dsh": "0.1.0-rc.2 || 0.1.0-rc.3 || 0.1.0-rc.6 || 0.1.0-rc.7 || 0.1.0-rc.8 || 0.1.1-rc.1 || 0.1.1-rc.2 || 0.1.2-rc.1 || 0.1.5-rc.1 || 0.1.5-rc.2 || 0.1.5-rc.3 || 0.1.7-rc.1 || 0.1.7-rc.2 || 0.2.0-rc.1 || 0.2.0-rc.2 || 0.2.1-rc.1 || 0.2.1-rc.2 || 0.2.1-rc.3 || 0.2.1-rc.4"
   },
   "contributes": {
     "tools": [],

package/lib/client.js

@@ -29,7 +29,7 @@ window.__ModuleLoader__.load({
 				"steer.inflight": "{n} 条正在插入",
 				"steer.now": "打断并输入",
 				"steer.now.aria": "红色：打断当前动作并立即输入",
-				"steer.now.unsupported": "包含非文本内容，暂不支持打断",
+				"steer.now.unsupported": "队列含非文本内容，暂不支持打断",
 				"steer.nowFailed": "打断失败，请重试。",
 				"steer.next": "插话发送",
 				"steer.next.aria": "黄色：当前动作结束后插入输入",
@@ -83,7 +83,7 @@ window.__ModuleLoader__.load({
 				"steer.inflight": "{n} inserting",
 				"steer.now": "Interrupt and send",
 				"steer.now.aria": "Red: interrupt the running action and send now",
-				"steer.now.unsupported": "Contains non-text content; interrupting is unsupported",
+				"steer.now.unsupported": "The queue contains non-text content; interrupting is unsupported",
 				"steer.nowFailed": "Interrupt failed, please retry.",
 				"steer.next": "Send after action",
 				"steer.next.aria": "Yellow: insert after the current action finishes",
@@ -137,7 +137,7 @@ window.__ModuleLoader__.load({
 				"steer.inflight": "{n} 件挿入中",
 				"steer.now": "中断して送信",
 				"steer.now.aria": "赤：実行中のアクションを中断して即座に送信",
-				"steer.now.unsupported": "非テキストコンテンツが含まれており、中断はサポートされていません",
+				"steer.now.unsupported": "キューに非テキストコンテンツが含まれるため、中断はサポートされていません",
 				"steer.nowFailed": "中断失敗。再試行してください。",
 				"steer.next": "アクション後に送信",
 				"steer.next.aria": "黄：現在のアクション完了後に挿入",
@@ -191,7 +191,7 @@ window.__ModuleLoader__.load({
 				"steer.inflight": "{n}개 삽입 중",
 				"steer.now": "중단 후 전송",
 				"steer.now.aria": "빨간색: 실행 중인 액션을 중단하고 즉시 전송",
-				"steer.now.unsupported": "비텍스트 콘텐츠가 포함되어 있어 중단이 지원되지 않습니다",
+				"steer.now.unsupported": "대기열에 비텍스트 콘텐츠가 있어 중단이 지원되지 않습니다",
 				"steer.nowFailed": "중단 실패. 다시 시도하세요.",
 				"steer.next": "액션 후 전송",
 				"steer.next.aria": "노란색: 현재 액션 완료 후 삽입",
@@ -245,7 +245,7 @@ window.__ModuleLoader__.load({
 				"steer.inflight": "{n} en cours d'insertion",
 				"steer.now": "Interrompre et envoyer",
 				"steer.now.aria": "Rouge : interrompre l'action en cours et envoyer immédiatement",
-				"steer.now.unsupported": "Contient du contenu non textuel ; interruption non prise en charge",
+				"steer.now.unsupported": "La file contient du contenu non textuel ; interruption non prise en charge",
 				"steer.nowFailed": "Échec de l'interruption, veuillez réessayer.",
 				"steer.next": "Envoyer après l'action",
 				"steer.next.aria": "Jaune : insérer après la fin de l'action en cours",
@@ -299,7 +299,7 @@ window.__ModuleLoader__.load({
 				"steer.inflight": "{n} werden eingefügt",
 				"steer.now": "Unterbrechen und senden",
 				"steer.now.aria": "Rot: Laufende Aktion unterbrechen und sofort senden",
-				"steer.now.unsupported": "Enthält Nicht-Text-Inhalt; Unterbrechen nicht unterstützt",
+				"steer.now.unsupported": "Warteschlange enthält Nicht-Text-Inhalt; Unterbrechen nicht unterstützt",
 				"steer.nowFailed": "Unterbrechen fehlgeschlagen, bitte erneut versuchen.",
 				"steer.next": "Nach Aktion senden",
 				"steer.next.aria": "Gelb: Nach Abschluss der aktuellen Aktion einfügen",
@@ -353,7 +353,7 @@ window.__ModuleLoader__.load({
 				"steer.inflight": "{n} in inserimento",
 				"steer.now": "Interrompi e invia",
 				"steer.now.aria": "Rosso: interrompi l'azione in corso e invia immediatamente",
-				"steer.now.unsupported": "Contiene contenuto non testuale; interruzione non supportata",
+				"steer.now.unsupported": "La coda contiene contenuto non testuale; interruzione non supportata",
 				"steer.nowFailed": "Interruzione fallita, riprovare.",
 				"steer.next": "Invia dopo l'azione",
 				"steer.next.aria": "Giallo: inserisci al termine dell'azione corrente",
@@ -407,7 +407,7 @@ window.__ModuleLoader__.load({
 				"steer.inflight": "{n} вставляется",
 				"steer.now": "Прервать и отправить",
 				"steer.now.aria": "Красный: прервать текущее действие и отправить немедленно",
-				"steer.now.unsupported": "Содержит нетекстовый контент; прерывание не поддерживается",
+				"steer.now.unsupported": "Очередь содержит нетекстовый контент; прерывание не поддерживается",
 				"steer.nowFailed": "Не удалось прервать, повторите.",
 				"steer.next": "Отправить после действия",
 				"steer.next.aria": "Жёлтый: вставить после завершения текущего действия",
@@ -461,7 +461,7 @@ window.__ModuleLoader__.load({
 				"steer.inflight": "{n} insertándose",
 				"steer.now": "Interrumpir y enviar",
 				"steer.now.aria": "Rojo: interrumpir la acción en curso y enviar inmediatamente",
-				"steer.now.unsupported": "Contiene contenido no textual; interrupción no compatible",
+				"steer.now.unsupported": "La cola contiene contenido no textual; interrupción no compatible",
 				"steer.nowFailed": "Error al interrumpir, inténtelo de nuevo.",
 				"steer.next": "Enviar después de la acción",
 				"steer.next.aria": "Amarillo: insertar después de que termine la acción actual",
@@ -652,11 +652,14 @@ window.__ModuleLoader__.load({
 		*   later (the yellow flow is reversible);
 		* - yellow (next): strict-steer the row into the running turn, consumed at
 		*   the next step boundary (after the current action finishes);
-		* - red (now): cancel the running turn, then remove the row and re-send its
-		*   text as a fresh message —the re-send arms the harness wake latch (the
-		*   converged driver restarts) and the interrupted input is processed as the
-		*   next turn's input. A plain steer after cancel would re-insert a message
-		*   that is already pending in next-turn and the inbox rejects it.
+		* - red (now): interrupt the running turn and make that single row the next
+		*   input. Every other pending row leaves the queue first and comes back
+		*   afterwards in its original order as a plain queued (green) row — the
+		*   re-sent target is then the only pending row, hence the one the woken
+		*   driver claims. A cancelled turn has no next step left for a yellow row to
+		*   steer into, so falling back to green is the correct outcome. Every touched
+		*   row must be pure text: the re-send path only carries text (a durable file
+		*   reference has no way back into `prompt`).
 		*
 		* The toolbar also exposes a queue-level "cancel and clear" that stops the
 		* current run and removes every queued row, plus a session-level
@@ -682,8 +685,13 @@ window.__ModuleLoader__.load({
 		}
 		/** Busy marker for a whole-queue rebuild (reorder); locks every row action. */
 		const REORDER_MARK = "__reorder__";
-		/** localStorage key for the manual collapse state (dsh-queue-plus parity). */
-		const COLLAPSE_KEY = "dsh-input-traffic:collapsed";
+		/**
+		* localStorage key for the MANUAL collapse state. Deliberately versioned v2:
+		* v1 was also written by an auto-collapse (empty-queue) path, so a stored v1
+		* value is not necessarily a user decision and must not shadow the new
+		* expanded-by-default layout.
+		*/
+		const COLLAPSE_KEY = "dsh-input-traffic:collapsed:v2";
 		/**
 		* Project the tier badge of one inbox row from its placement. Pure so the
 		* row rendering and its tests share one truth.
@@ -743,9 +751,9 @@ window.__ModuleLoader__.load({
 			const [collapsed, setCollapsed] = (0, react.useState)(() => {
 				try {
 					const v = localStorage.getItem(COLLAPSE_KEY);
-					return v === null ? true : v === "1";
+					return v === null ? false : v === "1";
 				} catch {
-					return true;
+					return false;
 				}
 			});
 			const { frozen, pending: frozenPending } = (0, react.useSyncExternalStore)(freezeStore.subscribe, () => freezeStore.getSnapshot(sessionId ?? ""));
@@ -753,15 +761,15 @@ window.__ModuleLoader__.load({
 			const listId = (0, react.useId)();
 			const editorRef = (0, react.useRef)(null);
 			(0, react.useEffect)(() => {
-				if (queue.length === 0 && !collapsed) setCollapsed(true);
 				if (editing !== null && !editing.id.startsWith("frozen:") && (!queueMutable || !queue.some((row) => row.id === editing.id))) setEditing(null);
 			}, [
-				collapsed,
 				editing,
 				queue,
 				queueMutable
 			]);
+			const collapseTouched = (0, react.useRef)(false);
 			(0, react.useEffect)(() => {
+				if (!collapseTouched.current) return;
 				try {
 					localStorage.setItem(COLLAPSE_KEY, collapsed ? "1" : "0");
 				} catch {}
@@ -782,6 +790,7 @@ window.__ModuleLoader__.load({
 			const planDisabled = !queueMutable || !running || frozen;
 			const nothingPending = queue.length === 0 && steering.length === 0;
 			const reorderUnsupported = queue.some((row) => row.text === null);
+			const interruptUnsupported = reorderUnsupported || steering.some((row) => row.text === null);
 			const applyAction = async (itemId, action, failure) => {
 				setBusy(itemId);
 				try {
@@ -818,16 +827,71 @@ window.__ModuleLoader__.load({
 					setBusy((current) => current === itemId ? null : current);
 				}
 			};
-			const steerRow = async (row, tier) => {
+			/**
+			* Interrupt the running turn and make ONE row the next input; every other
+			* pending row falls back to a plain queued (green) row in its original
+			* order.
+			*
+			* The host only ever wakes a turn through `followup`, which appends to the
+			* TAIL of next-turn, and the woken driver claims the HEAD. So "submit this
+			* row now" has to be built as: interrupt first (the aborted driver parks the
+			* queue and claims nothing while it quiesces), take every other row out,
+			* re-send this one — it is then the only pending row, hence the head — and
+			* finally put the others back in order.
+			* @param row - the row to submit, already known to carry pure text.
+			*/
+			const interruptRow = async (row) => {
 				setBusy(row.id);
 				try {
-					if (tier === "now") {
-						await cancel();
+					await cancel();
+					const displaced = [...queue.filter((candidate) => candidate.id !== row.id), ...steering];
+					const restored = [];
+					let restoreFailed = false;
+					for (const candidate of displaced) try {
+						await updateQueue(candidate.id, { kind: "remove" });
+						restored.push(candidate);
+					} catch (error) {
+						if (!(error instanceof Error) || !error.message.includes("queue-item-not-found")) restoreFailed = true;
+					}
+					try {
 						await updateQueue(row.id, { kind: "remove" });
-						if (row.text !== null) await send(row.text);
-					} else await updateQueue(row.id, { kind: "steer" });
+					} catch {}
+					try {
+						await send(row.text);
+					} finally {
+						for (const candidate of restored) {
+							if (candidate.text === null) continue;
+							try {
+								await send(candidate.text);
+							} catch {
+								restoreFailed = true;
+							}
+						}
+					}
+					if (restoreFailed) notify("error", t("steer.nowFailed"));
+				} catch {
+					notify("error", t("steer.nowFailed"));
+				} finally {
+					setBusy((current) => current === row.id ? null : current);
+				}
+			};
+			const steerRow = async (row, tier) => {
+				if (tier === "now") {
+					if (row.text === null || interruptUnsupported) {
+						notify("error", t("steer.now.unsupported"));
+						return;
+					}
+					await interruptRow({
+						id: row.id,
+						text: row.text
+					});
+					return;
+				}
+				setBusy(row.id);
+				try {
+					await updateQueue(row.id, { kind: "steer" });
 				} catch {
-					notify("error", tier === "now" ? t("steer.nowFailed") : t("steer.nextFailed"));
+					notify("error", t("steer.nextFailed"));
 				} finally {
 					setBusy((current) => current === row.id ? null : current);
 				}
@@ -966,6 +1030,7 @@ window.__ModuleLoader__.load({
 								"aria-expanded": expanded,
 								disabled: queue.length <= 1 || interactionActive,
 								onClick: () => {
+									collapseTouched.current = true;
 									setCollapsed((value) => !value);
 								},
 								children: [
@@ -1425,13 +1490,13 @@ window.__ModuleLoader__.load({
 														label: t("steer.now"),
 														side: "bottom",
 														delayMs: 500,
-														disabled: planDisabled || row.text === null,
+														disabled: planDisabled || interruptUnsupported,
 														children: /* @__PURE__ */ (0, react_jsx_runtime.jsx)("button", {
 															type: "button",
 															className: `${steer_queue_dock_module_css_default.tier} ${steer_queue_dock_module_css_default.tierNow}`,
 															"aria-label": t("steer.now"),
-															title: planDisabled ? t("steer.unavailable.running") : row.text === null ? t("steer.now.unsupported") : void 0,
-															disabled: busy !== null || planDisabled || row.text === null,
+															title: planDisabled ? t("steer.unavailable.running") : interruptUnsupported ? t("steer.now.unsupported") : void 0,
+															disabled: busy !== null || planDisabled || interruptUnsupported,
 															onClick: () => {
 																steerRow(row, "now");
 															},