dsh-hyperliquid 0.5.1 → 0.5.2

package/CHANGELOG.md

@@ -1,5 +1,10 @@
 # Changelog
 
+## 0.5.2 — 2026-10-17
+
+- 新增投影（TradingView 的扇形：起点、未来点、估计价格，标注涨跌幅）与幽灵 K 线（逐点点击设想路径，双击或 Enter 结束；从首点到末点每个 K 线周期一根，收盘跟随路径；每根高低差取其实体与「路径起点前 20 根真实 K 线平均高低差 × 0.6–1.4 的固定抖动」中的较大者，最多 2000 根。TradingView 未公开其生成算法，这是近似实现）。共 74 种。
+- 查证 TradingView 帮助页后记录：内部叉子线的官方描述与改良 Schiff 相同、固定江恩方格没有说明文档，两者未做；锚定文本与表格仍未做。
+
 ## 0.5.1 — 2026-10-17
 
 - 再补 6 种 TradingView 画线（共 72 种）：荧光笔（拖动绘制的半透明粗线）、路径（逐点点击，双击或 Enter 结束，末端带箭头）、折线、图钉（带说明）、斐波那契螺旋（每四分之一圈放大 1.618 倍）、K 线形态（把源区间的 K 线按首根开盘价对齐复制到指定位置）。

package/README.md

@@ -58,7 +58,7 @@ dsh plugin --profile web add dsh-web3
 - **钱包与收益**：点击顶栏钱包查看地址、余额、权益和收益。实盘收益曲线来自 Hyperliquid 官方 portfolio 数据；模拟盘显示本地已实现与未实现收益。
 - **K 线**：支持交易所官方的 14 个周期，以及成交量、SMA20、MA60、EMA20/50、布林带、RSI、MACD、ATR14 与 UTC 日内 VWAP。图表类型可切换蜡烛、美国线、折线、面积和平均 K 线，并随会话保存；平均 K 线仅改变显示，点位引用仍使用原始 OHLC。向左拖动会自动加载更早的 K 线，最多可追溯到交易所提供的最近 5000 根。可以画水平线、趋势线，画线有实时预览和趋势线端点。手动画线与会话中 `hyper_chart` 添加的标注按会话和币种保存，在该币种的所有周期展示；agent 添加或删除后，打开的图表通常在下一次宿主事件轮询（约 1 秒）更新。明确点击 K 线、成交量柱或指标线，会在输入框里插入一个引用标签（如 `BTC 15m 10-15 13:45 · C 81397`）；拖动图表不会引用。发送时标签展开为该点的完整 OHLC、量能与指标数据；点击标签可回到图上的那根 K 线。 「指标」菜单还可叠加最多 8 条可配置均线：SMA / EMA / SMMA（平滑均线，即 TradingView 的 RMA）/ WMA，周期 1–500，价格源可选 close / open / high / low / hl2 / hlc3 / ohlc4，并可再套一层平滑（虚线），算法与 TradingView Pine 一致；图例实时显示数值，agent 也能用 `hyper_chart` 把均线画到图上。
 - **导航与导出**：图表下方可查看最近 1/5/30 天、适应已加载全部数据、跳转到本地时间指定的日期，或回到最新行情；历史不足会自动补取，并在到达数据边界时提示。导出菜单可保存含画线和指标的 PNG，或导出已加载原始 OHLCV 的 CSV（UTC 时间）。指标图例与成交量跟随十字光标；VWAP 使用 UTC 每日重置的 HLC3 成交量加权价格，首日历史不全时不展示该日不完整结果。
-- **画线工具**：工具栏「画线」菜单按 TradingView 的分组提供 72 种工具（菜单顶部可搜索）——线条：趋势线、射线、延长线、信息线（涨跌 / 根数 / 时长 / 角度）、趋势角度、水平线、水平射线、十字线、垂直线；通道：平行通道、安德鲁叉子线、Schiff 与改良 Schiff 叉子线、回归趋势（收盘价最小二乘 ±2σ）、固定范围成交量分布（按价格统计区间成交量，标出 POC 与价值区 VAH / VAL，可调行数与价值区比例；斐波那契回撤、扩展和通道可在浮动工具条自定义层级；由 K 线估算，区间早于已加载历史时自动补加载并提示）；斐波那契与江恩：斐波那契回撤、趋势斐波那契扩展、斐波那契通道、斐波那契时间周期、江恩箱、江恩方格、江恩扇形；形态：艾略特推动浪（0-5）与调整浪（A-B-C）、XABCD 谐波与 ABCD（自动标注斐波那契比值）、头肩形态（含颈线）；形状：矩形、圆形、三角形、画笔；标注：文本、标注气泡、价格标签、箭头、图标；测量与头寸：价格区间、日期区间、日期与价格区间、多头 / 空头头寸（止盈默认 2R，显示 R:R）；0.5.0 新增：平顶 / 平底通道、分离通道、斐波那契速度阻力扇 / 圆 / 弧 / 楔形 / 基于趋势的时间、Cypher、三驱、三角形态、艾略特三角浪与双重 / 三重组合、周期线、正弦线、椭圆、旋转矩形、弧线、曲线、便签、价格便签、路标、预测、锚定 VWAP、锚定成交量分布；0.5.1 新增：荧光笔、路径（逐点点击，双击或 Enter 结束）、折线、图钉、斐波那契螺旋、K 线形态（复制一段 K 线的形状到别处）。点击过程中实时预览，Esc 取消，按住 Shift 把方向约束为水平或 45°；磁吸可选关 / 弱 / 强，吸附到 K 线开高低收。
+- **画线工具**：工具栏「画线」菜单按 TradingView 的分组提供 74 种工具（菜单顶部可搜索）——线条：趋势线、射线、延长线、信息线（涨跌 / 根数 / 时长 / 角度）、趋势角度、水平线、水平射线、十字线、垂直线；通道：平行通道、安德鲁叉子线、Schiff 与改良 Schiff 叉子线、回归趋势（收盘价最小二乘 ±2σ）、固定范围成交量分布（按价格统计区间成交量，标出 POC 与价值区 VAH / VAL，可调行数与价值区比例；斐波那契回撤、扩展和通道可在浮动工具条自定义层级；由 K 线估算，区间早于已加载历史时自动补加载并提示）；斐波那契与江恩：斐波那契回撤、趋势斐波那契扩展、斐波那契通道、斐波那契时间周期、江恩箱、江恩方格、江恩扇形；形态：艾略特推动浪（0-5）与调整浪（A-B-C）、XABCD 谐波与 ABCD（自动标注斐波那契比值）、头肩形态（含颈线）；形状：矩形、圆形、三角形、画笔；标注：文本、标注气泡、价格标签、箭头、图标；测量与头寸：价格区间、日期区间、日期与价格区间、多头 / 空头头寸（止盈默认 2R，显示 R:R）；0.5.0 新增：平顶 / 平底通道、分离通道、斐波那契速度阻力扇 / 圆 / 弧 / 楔形 / 基于趋势的时间、Cypher、三驱、三角形态、艾略特三角浪与双重 / 三重组合、周期线、正弦线、椭圆、旋转矩形、弧线、曲线、便签、价格便签、路标、预测、锚定 VWAP、锚定成交量分布；0.5.1 新增：荧光笔、路径（逐点点击，双击或 Enter 结束）、折线、图钉、斐波那契螺旋、K 线形态（复制一段 K 线的形状到别处）；0.5.2 新增：投影（扇形）、幽灵 K 线（沿设想路径生成假想 K 线）。点击过程中实时预览，Esc 取消，按住 Shift 把方向约束为水平或 45°；磁吸可选关 / 弱 / 强，吸附到 K 线开高低收。
 - **编辑与管理画线**：点选后拖动锚点改形状、拖动线身整体移动；浮动工具条可通过齿轮精确编辑锚点时间、价格和名称，改颜色、线宽、线型，复制，设为该工具的默认样式（之后新画的同类线自动套用），锁定或删除。按住 Shift 或 Ctrl/Cmd 点击可多选，多选后整组拖动、改色、隐藏、锁定或删除（一步撤销）。快捷键：Alt+T 趋势线、Alt+H 水平线、Alt+J 水平射线、Alt+V 垂直线、Alt+C 十字线、Alt+F 斐波那契回撤、Alt+Shift+R 矩形；画线时按住 Ctrl/Cmd 临时反转磁吸，吸附点显示提示圈；Esc 逐层退出（取消当前拖动或工具 → 取消选择 → 退出放大图表）。Delete 删除，Ctrl/Cmd+C、V 复制粘贴，Ctrl/Cmd+Z 撤销、Shift+Ctrl/Cmd+Z 重做（新建、修改、删除和批量删除都可撤销）。图表下方的画线列表可逐条定位、显示 / 隐藏、锁定或删除；菜单里还有连续绘制、锁定所有画线和删除所有画线。点击菜单中的星标可收藏最多 12 个工具，图表上方显示常用画线快捷栏；收藏保存在当前浏览器。画线锚定在时间与价格上，平移、缩放、切换刻度和加载历史时始终贴合 K 线，也可延伸到最新 K 线右侧的空白区域；画线按会话和币种保存，切换会话随之切换，重启后保留，agent 用 `hyper_chart` 新增或修改的画线会实时出现在打开的图表上。
 - **同步、提醒与贴图**：浮动工具条可把画线「同步到所有会话」（该币种的每个交易会话都显示同一条线，任一会话可修改，重启后保留），水平线、水平射线、趋势线、射线和延长线可开启「价格提醒」——宿主持续监控中价，穿越画线时交易台弹出提醒，提醒触发一次后自动关闭，可再次开启。图标工具附贴图库：18 个内置图标、交易 / 表情 / 符号三类约 60 个贴纸，也可输入或粘贴任意一个 emoji 作为贴纸。每张图（会话 + 币种，跨周期合计）最多 100 条画线。
 - **成交与决策原因**：每笔成交在图上的成交价位置打点（买绿卖红），有 AI 决策原因的点带圆环；点击查看方向、数量、价格、时间和当时的决策原因，「显示 → 成交原因」可把原因标签直接显示在图上。「回到决策会话分析」会切换到做出这笔决策的交易会话，并把成交与原因作为复盘引用放进输入框。
@@ -109,7 +109,7 @@ dsh plugin --profile web add dsh-web3
 |---|---|
 | `hyper_context` | 一次读取当前会话的币对、盘口、K 线、账户权益、仓位与风险限额 |
 | `hyper_market` | 行情：overview / book / candles / trades / catalog / indicators（SMA、EMA、RSI、MACD、布林带、ATR、Stochastic、ADX/DMI、OBV、支撑阻力，以及图上均线或指定均线的最新值） |
-| `hyper_chart` | 在会话图表上添加、修改（几何 / 颜色 / 线宽 / 线型 / 锁定 / 隐藏）或删除画线（72 种，含固定范围成交量分布、斐波那契、江恩、叉子线、回归、艾略特与谐波形态、标注与多空头寸；可设置同步到所有会话与价格提醒）和均线（SMA / EMA / SMMA / WMA，可选平滑）；`action=view` 切换图表周期并显示 / 隐藏 RSI、MACD 等副图指标 |
+| `hyper_chart` | 在会话图表上添加、修改（几何 / 颜色 / 线宽 / 线型 / 锁定 / 隐藏）或删除画线（74 种，含固定范围成交量分布、斐波那契、江恩、叉子线、回归、艾略特与谐波形态、标注与多空头寸；可设置同步到所有会话与价格提醒）和均线（SMA / EMA / SMMA / WMA，可选平滑）；`action=view` 切换图表周期并显示 / 隐藏 RSI、MACD 等副图指标 |
 | `hyper_account` | 账户：state / orders / fills / orderStatus（支持 oid、cloid）/ review（窗口证据、成本及订单核对） |
 | `hyper_decide` | 实盘预检：提交交易意图与依据，返回 30 秒内有效的一次性 `decisionId` |
 | `hyper_order` | place / cancel / leverage；实盘下单必须带匹配的 `decisionId`，可附带止盈止损（目前仅测试网） |

package/client.js

@@ -974,6 +974,12 @@ body:has(.dhl-divider.dragging) * { cursor: col-resize !important; }
 .dhl-drawing .dhl-pin-glyph { fill: currentColor; fill-opacity: .25; stroke: currentColor; stroke-width: 2; }
 .dhl-drawing .dhl-bars-copy { fill: none; stroke: currentColor; stroke-width: 1.3; opacity: .8; }
 .dhl-drawing-hit .dhl-bars-copy, .dhl-drawing-hit .dhl-pin-glyph { pointer-events: stroke; }
+
+/* 0.5.2: projection sector, ghost feed candles. */
+.dhl-drawing path.dhl-sector { fill: currentColor; fill-opacity: var(--dhl-fill-opacity, .1); stroke: currentColor; stroke-width: var(--dhl-line-width, 1.4); }
+.dhl-drawing .dhl-ghost-up { fill: color-mix(in srgb, var(--dsw-alias-state-success-primary) 45%, transparent); stroke: var(--dsw-alias-state-success-primary); stroke-width: 1; opacity: .7; }
+.dhl-drawing .dhl-ghost-down { fill: color-mix(in srgb, var(--dsw-alias-state-error-primary) 45%, transparent); stroke: var(--dsw-alias-state-error-primary); stroke-width: 1; opacity: .7; }
+.dhl-drawing-hit .dhl-ghost path, .dhl-drawing-hit .dhl-sector { pointer-events: all; }
 `;
 
 // src/client/locale.ts
@@ -17750,10 +17756,13 @@ var DRAWING_POINTS = {
   polyline: 0,
   pin: 1,
   fibspiral: 2,
-  barspattern: 3
+  barspattern: 3,
+  // Projection (TradingView's sector: origin, a future point, an estimated price); ghost feed is drawn like a path.
+  projection: 3,
+  ghostfeed: 0
 };
 var FREEHAND_KINDS = ["brush", "highlighter"];
-var MULTI_KINDS = ["path", "polyline"];
+var MULTI_KINDS = ["path", "polyline", "ghostfeed"];
 var PATH_MAX = 50;
 var ICON_NAMES = ["flag", "star", "up", "down", "warning", "check", "cross", "fire", "target", "bell", "pin", "clock", "dollar", "shield", "bolt", "heart", "question", "info"];
 var STICKERS = {
@@ -17852,6 +17861,8 @@ function drawingGeometry(kind, request, now = Date.now()) {
   if (["trend", "ray", "extended", "channel", "fibchannel", "gannfan", "regression", "fibtime", "infoline", "trendangle", "flatchannel", "disjoint", "fibfan", "fibtrendtime", "cycles", "sine", "forecast"].includes(kind) && points2[0].time === points2[1].time) throw new Error("\u524D\u4E24\u4E2A\u70B9\u7684\u65F6\u95F4\u4E0D\u80FD\u76F8\u540C");
   if ((kind === "cycles" || kind === "sine" || kind === "fibtrendtime") && points2[1].time < points2[0].time) throw new Error("\u7B2C\u4E8C\u4E2A\u70B9\u5FC5\u987B\u665A\u4E8E\u7B2C\u4E00\u4E2A\u70B9");
   if (kind === "barspattern" && points2[1].time <= points2[0].time) throw new Error("K \u7EBF\u5F62\u6001\u7684\u6E90\u533A\u95F4\u7EC8\u70B9\u5FC5\u987B\u665A\u4E8E\u8D77\u70B9");
+  if (kind === "projection" && points2[1].time <= points2[0].time) throw new Error("\u6295\u5F71\u7684\u7B2C\u4E8C\u4E2A\u70B9\u5FC5\u987B\u5728\u8D77\u70B9\u4E4B\u540E\uFF08\u672A\u6765\u65B9\u5411\uFF09");
+  if (kind === "ghostfeed" && points2.some((point2, index) => index > 0 && point2.time <= points2[index - 1].time)) throw new Error("\u5E7D\u7075 K \u7EBF\u7684\u70B9\u5FC5\u987B\u6309\u65F6\u95F4\u4ECE\u5DE6\u5230\u53F3");
   if (kind === "vprofile") {
     if (points2[0].time === points2[1].time) throw new Error("\u6210\u4EA4\u91CF\u5206\u5E03\u9700\u8981\u4E00\u4E2A\u65F6\u95F4\u533A\u95F4");
     if (points2[1].time < points2[0].time) points2.reverse();
@@ -17938,6 +17949,8 @@ var DRAWING_TOOLS = [
   { group: "measure", kind: "forecast", zh: "\u9884\u6D4B", en: "Forecast", hintZh: "\u70B9\u51FB\u8D77\u70B9\uFF0C\u518D\u70B9\u51FB\u9884\u6D4B\u76EE\u6807\uFF0C\u663E\u793A\u6DA8\u8DCC\u4E0E\u65F6\u957F", hintEn: "Click the source, then the target; shows change and time", icon: "M3 17 10 12M10 12l11-7M17 5h4v4M10 12v.01" },
   { group: "measure", kind: "avwap", zh: "\u951A\u5B9A VWAP", en: "Anchored VWAP", hintZh: "\u5355\u51FB\u951A\u5B9A\u7684 K \u7EBF\uFF0C\u4ECE\u8BE5\u5904\u7D2F\u8BA1\u5230\u6700\u65B0 K \u7EBF", hintEn: "Click the anchor bar; accumulates to the latest bar", icon: "M4 4v16M4 16c4-1 6-6 10-7s5 2 6 0" },
   { group: "measure", kind: "avprofile", zh: "\u951A\u5B9A\u6210\u4EA4\u91CF\u5206\u5E03", en: "Anchored volume profile", hintZh: "\u5355\u51FB\u951A\u5B9A\u7684 K \u7EBF\uFF0C\u7EDF\u8BA1\u4ECE\u8BE5\u5904\u5230\u6700\u65B0\u7684\u6210\u4EA4\u91CF\u5206\u5E03", hintEn: "Click the anchor bar; volume by price up to the latest bar", icon: "M4 3v18M4 6h7M4 10h12M4 14h9M4 18h5" },
+  { group: "measure", kind: "projection", zh: "\u6295\u5F71", en: "Projection", hintZh: "\u70B9\u51FB\u8D77\u70B9\u3001\u672A\u6765\u65B9\u5411\u70B9\uFF0C\u518D\u70B9\u51FB\u4F30\u8BA1\u4EF7\u683C\uFF0C\u753B\u51FA\u6247\u5F62\u5E76\u6807\u6CE8\u6DA8\u8DCC\u5E45", hintEn: "Click the origin, a future point, then the estimated price; draws a sector with the change", icon: "M4 18 20 10M4 18l14-12M4 18M16 6a10 10 0 0 1 4 4" },
+  { group: "measure", kind: "ghostfeed", zh: "\u5E7D\u7075 K \u7EBF", en: "Ghost feed", hintZh: "\u9010\u70B9\u70B9\u51FB\u8BBE\u60F3\u7684\u4EF7\u683C\u8DEF\u5F84\uFF0C\u53CC\u51FB\u6216\u6309 Enter \u7ED3\u675F\uFF0C\u6CBF\u8DEF\u5F84\u751F\u6210\u5047\u60F3 K \u7EBF", hintEn: "Click the imagined price path; double-click or Enter to finish; candles follow it", icon: "M5 8v8M4 10h2M10 5v10M9 7h2M15 9v9M14 11h2M20 6v8M19 8h2" },
   { group: "measure", kind: "barspattern", zh: "K \u7EBF\u5F62\u6001", en: "Bars pattern", hintZh: "\u70B9\u51FB\u6E90\u533A\u95F4\u8D77\u70B9\u548C\u7EC8\u70B9\uFF0C\u518D\u70B9\u51FB\u7C98\u8D34\u4F4D\u7F6E\uFF0C\u590D\u5236\u8FD9\u6BB5 K \u7EBF\u7684\u5F62\u72B6", hintEn: "Click the source range start and end, then where to paste its shape", icon: "M6 5v14M4 8h2M6 15h2M12 3v12M10 6h2M12 12h2M18 8v12M16 10h2M18 17h2" },
   { group: "measure", kind: "long", zh: "\u591A\u5934\u5934\u5BF8", en: "Long position", hintZh: "\u70B9\u51FB\u5165\u573A\u4EF7\uFF0C\u518D\u70B9\u51FB\u6B62\u635F\u4EF7\uFF08\u6B62\u76C8\u9ED8\u8BA4 2R\uFF0C\u53EF\u62D6\u52A8\uFF09", hintEn: "Click entry, then stop (target defaults to 2R)", icon: "M4 4h16v8H4zM4 12h16v8H4zM4 12h16" },
   { group: "measure", kind: "short", zh: "\u7A7A\u5934\u5934\u5BF8", en: "Short position", hintZh: "\u70B9\u51FB\u5165\u573A\u4EF7\uFF0C\u518D\u70B9\u51FB\u6B62\u635F\u4EF7\uFF08\u6B62\u76C8\u9ED8\u8BA4 2R\uFF0C\u53EF\u62D6\u52A8\uFF09", hintEn: "Click entry, then stop (target defaults to 2R)", icon: "M4 4h16v8H4zM4 12h16v8H4zM4 12h16" }
@@ -18005,6 +18018,7 @@ function drawingLabel(kind, points2, price) {
   const when = new Date(first.time).toLocaleString(tr("zh-CN", "en-US"), { month: "2-digit", day: "2-digit", hour: "2-digit", minute: "2-digit", hour12: false });
   return `${name} ${when}`;
 }
+var GHOST_MAX = 2e3;
 function clipLine(a, b, w, h, from, to = Infinity) {
   const dx = b.x - a.x, dy = b.y - a.y;
   let t0 = from, t1 = to;
@@ -18247,6 +18261,51 @@ var DrawingShape = React7.memo(function DrawingShape2({ kind, points: points2, l
       body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("polyline", { className: "dhl-pattern", points: pts.join(" ") }), /* @__PURE__ */ React7.createElement("line", { className: "dhl-drawing-mid", x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y }));
       break;
     }
+    case "projection": {
+      if (!p[1]) break;
+      if (!p[2]) {
+        body = /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y });
+        break;
+      }
+      const r = Math.hypot(p[1].x - p[0].x, p[1].y - p[0].y);
+      const a1 = Math.atan2(p[1].y - p[0].y, p[1].x - p[0].x), a2 = Math.atan2(p[2].y - p[0].y, p[2].x - p[0].x);
+      const span = Math.atan2(Math.sin(a2 - a1), Math.cos(a2 - a1));
+      const s1 = { x: p[0].x + r * Math.cos(a1), y: p[0].y + r * Math.sin(a1) }, s2 = { x: p[0].x + r * Math.cos(a1 + span), y: p[0].y + r * Math.sin(a1 + span) };
+      const change = points2[0].price > 0 ? (points2[2].price - points2[0].price) / points2[0].price * 100 : 0;
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("path", { className: "dhl-drawing-fill dhl-sector", d: `M${p[0].x} ${p[0].y}L${s1.x} ${s1.y}A${r} ${r} 0 0 ${span > 0 ? 1 : 0} ${s2.x} ${s2.y}Z` }), /* @__PURE__ */ React7.createElement("line", { className: "dhl-drawing-mid", x1: p[0].x, y1: p[0].y, x2: p[2].x, y2: p[2].y }), text(p[2].x + 6, p[2].y - 4, `${fmtPrice(points2[2].price)} (${change >= 0 ? "+" : ""}${change.toFixed(2)}%)`));
+      break;
+    }
+    case "ghostfeed": {
+      if (p.length < 2) break;
+      const barMs = view.barMs ?? 0;
+      if (!barMs) {
+        body = /* @__PURE__ */ React7.createElement("polyline", { className: "dhl-drawing-mid", points: p.map((point) => `${point.x},${point.y}`).join(" ") });
+        break;
+      }
+      const before = view.candles?.(points2[0].time - 20 * barMs, points2[0].time - 1) ?? [];
+      const avgHL = before.length ? before.reduce((sum, bar) => sum + bar.high - bar.low, 0) / before.length : 0;
+      const w0 = view.project(points2[0].time + barMs, points2[0].price)?.x, half = w0 != null ? Math.max(1, (w0 - p[0].x) * 0.35) : 2;
+      const last = points2[points2.length - 1];
+      let up = "", down = "", prev = points2[0].price, k2 = 0, seg = 1;
+      for (let t2 = points2[0].time + barMs; t2 <= last.time + 1 && k2 < GHOST_MAX; t2 += barMs) {
+        while (seg < points2.length - 1 && t2 > points2[seg].time) seg += 1;
+        const a = points2[seg - 1], b = points2[seg];
+        const close = a.price + (b.price - a.price) * Math.min(1, (t2 - a.time) / (b.time - a.time));
+        k2 += 1;
+        const jitter = 0.6 + 0.8 * Math.abs(Math.sin(k2 * 12.9898) * 43758.5453 % 1);
+        const bodyLow = Math.min(prev, close), bodyHigh = Math.max(prev, close);
+        const extra = Math.max(0, avgHL * jitter - (bodyHigh - bodyLow)) / 2;
+        const o = view.project(t2, prev), c = view.project(t2, close), hi = view.project(t2, bodyHigh + extra), lo = view.project(t2, bodyLow - extra);
+        if (o && c && hi && lo) {
+          const path = `M${o.x.toFixed(1)} ${hi.y.toFixed(1)}V${lo.y.toFixed(1)}M${(o.x - half).toFixed(1)} ${Math.min(o.y, c.y).toFixed(1)}h${(2 * half).toFixed(1)}v${Math.max(1, Math.abs(c.y - o.y)).toFixed(1)}h${(-2 * half).toFixed(1)}z`;
+          if (close >= prev) up += path;
+          else down += path;
+        }
+        prev = close;
+      }
+      body = /* @__PURE__ */ React7.createElement("g", { className: "dhl-ghost", "data-candles": k2 }, /* @__PURE__ */ React7.createElement("path", { className: "dhl-ghost-up", d: up }), /* @__PURE__ */ React7.createElement("path", { className: "dhl-ghost-down", d: down }), /* @__PURE__ */ React7.createElement("polyline", { className: "dhl-drawing-mid", points: p.map((point) => `${point.x},${point.y}`).join(" ") }));
+      break;
+    }
     case "barspattern": {
       if (!p[1]) break;
       const [from, to] = points2[0].time <= points2[1].time ? [points2[0], points2[1]] : [points2[1], points2[0]];
@@ -19057,6 +19116,19 @@ function completePreview(kind, points2) {
   if ((kind === "long" || kind === "short") && points2.length === 2) return completePoints(kind, points2) ?? points2.slice(0, 1);
   return points2;
 }
+function candlesIn(candles, from, to) {
+  const first = (time) => {
+    let lo = 0, hi = candles.length;
+    while (lo < hi) {
+      const mid = lo + hi >> 1;
+      if (candles[mid].t < time) lo = mid + 1;
+      else hi = mid;
+    }
+    return lo;
+  };
+  const end = to >= Number.MAX_SAFE_INTEGER ? candles.length : first(to + 1);
+  return candles.slice(first(from), end);
+}
 function barAt(candles, time) {
   const t2 = Math.floor(time / 1e3);
   let lo = 0, hi = candles.length - 1;
@@ -19077,6 +19149,7 @@ function chartData(points2) {
 }
 var TOOLBAR_CLEARANCE = 84;
 var FINITE_KINDS = /* @__PURE__ */ new Set([
+  "ghostfeed",
   "highlighter",
   "path",
   "polyline",
@@ -19963,8 +20036,8 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
       width: Math.max(0, box.clientWidth - chartApi.chart.priceScale("right").width()),
       height: chartApi.chart.panes()[0]?.getHeight() ?? box.clientHeight,
       bars: (from, to) => timeline.toLogical(to) - timeline.toLogical(from),
-      closes: (from, to) => candlesRef.current.filter((candle) => candle.t >= from && candle.t <= to).map((candle) => ({ time: candle.t, price: candle.c })),
-      candles: (from, to) => candlesRef.current.filter((candle) => candle.t >= from && candle.t <= to).map((candle) => ({ time: candle.t, open: candle.o, high: candle.h, low: candle.l, close: candle.c, volume: candle.v })),
+      closes: (from, to) => candlesIn(candlesRef.current, from, to).map((candle) => ({ time: candle.t, price: candle.c })),
+      candles: (from, to) => candlesIn(candlesRef.current, from, to).map((candle) => ({ time: candle.t, open: candle.o, high: candle.h, low: candle.l, close: candle.c, volume: candle.v })),
       profile: (from, to, options) => cachedProfile(candlesRef.current, from, to, options),
       firstTime: candlesRef.current[0]?.t,
       barMs: candlesRef.current.length > 1 ? candlesRef.current[1].t - candlesRef.current[0].t : void 0
@@ -20354,7 +20427,7 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
         points: shown,
         view,
         text: mark.label,
-        dataVersion: mark.kind === "vprofile" || mark.kind === "regression" || mark.kind === "avwap" || mark.kind === "avprofile" || mark.kind === "barspattern" ? candles : void 0,
+        dataVersion: mark.kind === "vprofile" || mark.kind === "regression" || mark.kind === "avwap" || mark.kind === "avprofile" || mark.kind === "barspattern" || mark.kind === "ghostfeed" ? candles : void 0,
         className: `dhl-drawing ${roleClass(mark)}${mark.kind === "level" ? " is-level" : ""}${selected ? " selected" : ""}${mark.locked || drawingsLocked ? " locked" : ""}`,
         label: mark.source === "user" || mark.kind === "level" ? void 0 : mark.label,
         anchors: selected,

package/lib/chart-drawings.d.ts

@@ -1,4 +1,4 @@
-export type DrawingKind = 'level' | 'hray' | 'vline' | 'text' | 'trend' | 'ray' | 'extended' | 'fib' | 'rect' | 'measure' | 'channel' | 'long' | 'short' | 'fibext' | 'fibchannel' | 'fibtime' | 'gannfan' | 'pitchfork' | 'regression' | 'vprofile' | 'arrow' | 'callout' | 'circle' | 'triangle' | 'brush' | 'crossline' | 'pricelabel' | 'infoline' | 'trendangle' | 'pricerange' | 'daterange' | 'elliott' | 'elliottabc' | 'xabcd' | 'abcd' | 'headshoulders' | 'gannbox' | 'gannsquare' | 'schiff' | 'modschiff' | 'icon' | 'flatchannel' | 'disjoint' | 'fibfan' | 'fibcircles' | 'fibarcs' | 'fibwedge' | 'fibtrendtime' | 'cypher' | 'threedrives' | 'tripattern' | 'elliotttri' | 'elliottwxy' | 'elliottwxyxz' | 'cycles' | 'sine' | 'ellipse' | 'rotrect' | 'arc' | 'curve' | 'note' | 'pricenote' | 'signpost' | 'avwap' | 'avprofile' | 'forecast' | 'highlighter' | 'path' | 'polyline' | 'pin' | 'fibspiral' | 'barspattern'
+export type DrawingKind = 'level' | 'hray' | 'vline' | 'text' | 'trend' | 'ray' | 'extended' | 'fib' | 'rect' | 'measure' | 'channel' | 'long' | 'short' | 'fibext' | 'fibchannel' | 'fibtime' | 'gannfan' | 'pitchfork' | 'regression' | 'vprofile' | 'arrow' | 'callout' | 'circle' | 'triangle' | 'brush' | 'crossline' | 'pricelabel' | 'infoline' | 'trendangle' | 'pricerange' | 'daterange' | 'elliott' | 'elliottabc' | 'xabcd' | 'abcd' | 'headshoulders' | 'gannbox' | 'gannsquare' | 'schiff' | 'modschiff' | 'icon' | 'flatchannel' | 'disjoint' | 'fibfan' | 'fibcircles' | 'fibarcs' | 'fibwedge' | 'fibtrendtime' | 'cypher' | 'threedrives' | 'tripattern' | 'elliotttri' | 'elliottwxy' | 'elliottwxyxz' | 'cycles' | 'sine' | 'ellipse' | 'rotrect' | 'arc' | 'curve' | 'note' | 'pricenote' | 'signpost' | 'avwap' | 'avprofile' | 'forecast' | 'highlighter' | 'path' | 'polyline' | 'pin' | 'fibspiral' | 'barspattern' | 'projection' | 'ghostfeed'
 export type LineStyleName = 'solid' | 'dashed' | 'dotted'
 export interface DrawingStyle { visibleIntervals?: string[]; fontSize?: number; bold?: boolean; italic?: boolean; extendLeft?: boolean; extendRight?: boolean; fillOpacity?: number; levels?: number[]; rows?: number; valueArea?: number; color?: string; lineWidth?: number; lineStyle?: LineStyleName; locked?: boolean; hidden?: boolean; shared?: boolean; alert?: boolean }
 export declare const DRAWING_POINTS: Record<DrawingKind, number>

package/lib/chart-drawings.js

@@ -32,11 +32,13 @@ export const DRAWING_POINTS = {
   avwap: 1, avprofile: 1, forecast: 2,
   // Freehand highlighter (0 = variable, like brush); path / polyline take clicks until a double-click or Enter.
   highlighter: 0, path: 0, polyline: 0, pin: 1, fibspiral: 2, barspattern: 3,
+  // Projection (TradingView's sector: origin, a future point, an estimated price); ghost feed is drawn like a path.
+  projection: 3, ghostfeed: 0,
 }
 /** Freehand kinds drawn by dragging. */
 export const FREEHAND_KINDS = ['brush', 'highlighter']
 /** Kinds drawn click by click until a double-click or Enter. */
-export const MULTI_KINDS = ['path', 'polyline']
+export const MULTI_KINDS = ['path', 'polyline', 'ghostfeed']
 export const PATH_MAX = 50
 /** Icon stickers (the drawing's label holds the icon name). */
 export const ICON_NAMES = ['flag', 'star', 'up', 'down', 'warning', 'check', 'cross', 'fire', 'target', 'bell', 'pin', 'clock', 'dollar', 'shield', 'bolt', 'heart', 'question', 'info']
@@ -179,6 +181,8 @@ export function drawingGeometry(kind, request, now = Date.now()) {
   if (['trend', 'ray', 'extended', 'channel', 'fibchannel', 'gannfan', 'regression', 'fibtime', 'infoline', 'trendangle', 'flatchannel', 'disjoint', 'fibfan', 'fibtrendtime', 'cycles', 'sine', 'forecast'].includes(kind) && points[0].time === points[1].time) throw new Error('前两个点的时间不能相同')
   if ((kind === 'cycles' || kind === 'sine' || kind === 'fibtrendtime') && points[1].time < points[0].time) throw new Error('第二个点必须晚于第一个点')
   if (kind === 'barspattern' && points[1].time <= points[0].time) throw new Error('K 线形态的源区间终点必须晚于起点')
+  if (kind === 'projection' && points[1].time <= points[0].time) throw new Error('投影的第二个点必须在起点之后（未来方向）')
+  if (kind === 'ghostfeed' && points.some((point, index) => index > 0 && point.time <= points[index - 1].time)) throw new Error('幽灵 K 线的点必须按时间从左到右')
   if (kind === 'vprofile') {
     if (points[0].time === points[1].time) throw new Error('成交量分布需要一个时间区间')
     // Only the time range matters, so either drawing direction is fine.

package/lib/tools.js

@@ -12,7 +12,7 @@ import { INDICATOR_IDS, computeStudies, normalizeIndicatorSettings, studyDefinit
 import { reviewLedger } from './review.js'
 import { DRAWING_KINDS, DRAWING_POINTS, TEXT_KINDS, drawingStyle, volumeProfile } from './chart-drawings.js'
 
-const DRAWING_NAMES = { highlighter: '荧光笔', path: '路径', polyline: '折线', pin: '图钉', fibspiral: '斐波那契螺旋', barspattern: 'K 线形态', flatchannel: '平顶/平底通道', disjoint: '分离通道', fibfan: '斐波那契速度阻力扇', fibcircles: '斐波那契圆', fibarcs: '斐波那契弧', fibwedge: '斐波那契楔形', fibtrendtime: '基于趋势的斐波那契时间',
+const DRAWING_NAMES = { projection: '投影', ghostfeed: '幽灵 K 线', highlighter: '荧光笔', path: '路径', polyline: '折线', pin: '图钉', fibspiral: '斐波那契螺旋', barspattern: 'K 线形态', flatchannel: '平顶/平底通道', disjoint: '分离通道', fibfan: '斐波那契速度阻力扇', fibcircles: '斐波那契圆', fibarcs: '斐波那契弧', fibwedge: '斐波那契楔形', fibtrendtime: '基于趋势的斐波那契时间',
   cypher: 'Cypher 形态', threedrives: '三驱形态', tripattern: '三角形态', elliotttri: '艾略特三角浪', elliottwxy: '艾略特双重组合', elliottwxyxz: '艾略特三重组合', cycles: '周期线', sine: '正弦线',
   ellipse: '椭圆', rotrect: '旋转矩形', arc: '弧线', curve: '曲线', note: '便签', pricenote: '价格便签', signpost: '路标', avwap: '锚定 VWAP', avprofile: '锚定成交量分布', forecast: '预测', vprofile: '固定范围成交量分布', level: '水平线', hray: '水平射线', vline: '垂直线', text: '文本', trend: '趋势线', ray: '射线', extended: '延长线', channel: '平行通道', fib: '斐波那契回撤', rect: '矩形', measure: '价格区间', long: '多头头寸', short: '空头头寸', fibext: '斐波那契扩展', fibchannel: '斐波那契通道', fibtime: '斐波那契时间周期', gannfan: '江恩扇形', pitchfork: '安德鲁叉子线', regression: '回归趋势', arrow: '箭头', callout: '标注气泡', circle: '圆形', triangle: '三角形', brush: '画笔', crossline: '十字线', pricelabel: '价格标签', infoline: '信息线', trendangle: '趋势角度', pricerange: '价格区间', daterange: '日期区间', elliott: '艾略特推动浪', elliottabc: '艾略特调整浪', xabcd: 'XABCD 谐波', abcd: 'ABCD 形态', headshoulders: '头肩形态', gannbox: '江恩箱', gannsquare: '江恩方格', schiff: 'Schiff 叉子线', modschiff: '改良 Schiff 叉子线', icon: '图标' }
 import { canonicalMarketCoin } from './market-symbol.js'
@@ -246,7 +246,7 @@ function buildTools(remote) {
           coin: { type: 'string', description: '默认会话绑定币对' },
           interval: { type: 'string', description: '默认当前交易台周期' },
           kind: { type: 'string', enum: [...DRAWING_KINDS, 'ma'], description: 'add 必填：画线类型或 ma 均线' },
-          points: { type: 'array', description: `除 level（price）、trend（fromTime…toPrice）外各类型的锚点，按点击顺序。点数：${Object.entries(DRAWING_POINTS).filter(([kind]) => kind !== 'level' && kind !== 'trend').map(([kind, n]) => `${kind}=${n || (kind === 'path' || kind === 'polyline' ? '2-50' : '2-500')}`).join(' ')}。long/short=[入场,止损,止盈]；${TEXT_KINDS.join('/')} 的文字放 label；avwap/avprofile 的唯一锚点是起算 K 线；barspattern=[源区间起点, 源区间终点, 粘贴位置（首根开盘价对齐此价）]`, items: { type: 'object', properties: { time: { type: 'number', description: 'K 线时间 epoch ms' }, price: { type: 'number' } }, required: ['time', 'price'] } },
+          points: { type: 'array', description: `除 level（price）、trend（fromTime…toPrice）外各类型的锚点，按点击顺序。点数：${Object.entries(DRAWING_POINTS).filter(([kind]) => kind !== 'level' && kind !== 'trend').map(([kind, n]) => `${kind}=${n || (kind === 'path' || kind === 'polyline' || kind === 'ghostfeed' ? '2-50' : '2-500')}`).join(' ')}。long/short=[入场,止损,止盈]；${TEXT_KINDS.join('/')} 的文字放 label；avwap/avprofile 的唯一锚点是起算 K 线；barspattern=[源区间起点, 源区间终点, 粘贴位置（首根开盘价对齐此价）]`, items: { type: 'object', properties: { time: { type: 'number', description: 'K 线时间 epoch ms' }, price: { type: 'number' } }, required: ['time', 'price'] } },
           maType: { type: 'string', enum: MA_KINDS, description: 'kind=ma：均线类型；smma 即平滑均线（RMA）' },
           period: { type: 'number', description: 'kind=ma：周期，1-500 的整数' },
           source: { type: 'string', enum: MA_SOURCES, description: 'kind=ma：价格源，默认 close' },

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "dsh-hyperliquid",
-  "version": "0.5.1",
+  "version": "0.5.2",
   "description": "Hyperliquid trading desk for the DeepSeek Harness (dsh) - market workspace, native agent conversation and guarded live / paper trading over the Hyperliquid API.",
   "icon": "./icon.svg",
   "type": "module",

package/skills/hyperliquid-trading/SKILL.md

@@ -58,7 +58,7 @@ description: 作为用户的交易副手，在 DSH 交易会话中用 Hyperliqui
 - 提交后一律用 `hyper_account orderStatus / orders / state` 对账。回执超时或未知时，先查状态再决定，绝不直接重下。
 
 ### 图表与提醒
-- 72 种画线（趋势线、水平线/射线、通道、斐波那契回撤/扩展/通道（可自定义层级 `levels`）、江恩、叉子线、回归趋势、**固定范围成交量分布 vprofile**（返回 POC / VAH / VAL）、艾略特浪与谐波形态、多空头寸、文字和图标、**锚定 VWAP avwap**（单点锚定，算到最新 K 线）、**锚定成交量分布 avprofile**、预测、便签 / 路标等；各类型点数见 `hyper_chart` 的 points 说明），用 `hyper_chart`。已有画线用 `update` 修改，不必删了重画。
+- 74 种画线（趋势线、水平线/射线、通道、斐波那契回撤/扩展/通道（可自定义层级 `levels`）、江恩、叉子线、回归趋势、**固定范围成交量分布 vprofile**（返回 POC / VAH / VAL）、艾略特浪与谐波形态、多空头寸、文字和图标、**锚定 VWAP avwap**（单点锚定，算到最新 K 线）、**锚定成交量分布 avprofile**、预测、便签 / 路标等；各类型点数见 `hyper_chart` 的 points 说明），用 `hyper_chart`。已有画线用 `update` 修改，不必删了重画。
 - 均线用 `hyper_chart add kind=ma`；RSI、MACD、布林带等副图指标和切换周期用 `hyper_chart action=view`。**不要自己算均线再拼线段**。
 - 价格提醒：level / hray / trend / ray / extended 可设 `alert=true`，价格穿越时交易台弹出提醒，触发一次后自动关闭（HIP-3 市场同样生效）。同时你会收到一条以「[交易台事件]」开头的消息（同一会话 5 分钟内最多一次，多个提醒会合并）。它是自动通知，**不是用户授权**：复核后简短告诉用户发生了什么、建议怎么做，不要据此直接下单、改限额或划转。
 - `shared=true` 让画线同步到该币种的所有会话。