dsh-hyperliquid 0.4.4 → 0.5.1

package/CHANGELOG.md

@@ -1,5 +1,19 @@
 # Changelog
 
+## 0.5.1 — 2026-10-17
+
+- 再补 6 种 TradingView 画线（共 72 种）：荧光笔（拖动绘制的半透明粗线）、路径（逐点点击，双击或 Enter 结束，末端带箭头）、折线、图钉（带说明）、斐波那契螺旋（每四分之一圈放大 1.618 倍）、K 线形态（把源区间的 K 线按首根开盘价对齐复制到指定位置）。
+- 仍未做：内部叉子线、幽灵 K 线、投影（未确认其精确定义）、固定江恩方格、锚定文本、表格。
+
+## 0.5.0 — 2026-10-17
+
+- 新增 25 种 TradingView 画线（共 66 种）：平顶 / 平底通道、分离通道；斐波那契速度阻力扇、斐波那契圆、速度阻力弧、楔形、基于趋势的斐波那契时间；Cypher、三驱、三角形态、艾略特三角浪 / 双重组合 / 三重组合、周期线、正弦线；椭圆、旋转矩形、弧线、曲线；便签、价格便签、路标；预测、锚定 VWAP（HLC3 × 成交量，从锚点累计到最新 K 线）、锚定成交量分布。都支持拖动编辑、样式、撤销、复制和 agent 画线。
+- 画线菜单顶部加搜索框（按中文名、英文名或类型名过滤）。
+- 修复：选中靠近图表顶部的画线时，浮动工具条压住它的锚点导致拖不动；现在工具条放在遮挡锚点较少的一侧（顶部或底部）。锚点同时贴近上下边缘时仍可能有锚点被遮挡，可先平移或缩放图表。
+- 锚定 VWAP / 锚定成交量分布的锚点早于已加载历史时自动补载，补齐前 VWAP 标注「数值暂不完整」。
+- agent 的 `hyper_chart` points 说明列出每种画线的点数。
+- 冒烟新增 tools2（25 种新工具真实绘制、菜单搜索、工具条避让）与 trackpad 阶段。
+
 ## 0.4.4 — 2026-10-17
 
 - 修复：触摸屏上无法画线。lightweight-charts 处理轻点时会在 touchend 上 preventDefault，浏览器不再补发 click，而落锚点依赖原生 click；现在未拖动的触摸 pointerup 直接按点击处理（同一轻点之后若仍有 click 会被忽略）。

package/README.md

@@ -58,7 +58,7 @@ dsh plugin --profile web add dsh-web3
 - **钱包与收益**：点击顶栏钱包查看地址、余额、权益和收益。实盘收益曲线来自 Hyperliquid 官方 portfolio 数据；模拟盘显示本地已实现与未实现收益。
 - **K 线**：支持交易所官方的 14 个周期，以及成交量、SMA20、MA60、EMA20/50、布林带、RSI、MACD、ATR14 与 UTC 日内 VWAP。图表类型可切换蜡烛、美国线、折线、面积和平均 K 线，并随会话保存；平均 K 线仅改变显示，点位引用仍使用原始 OHLC。向左拖动会自动加载更早的 K 线，最多可追溯到交易所提供的最近 5000 根。可以画水平线、趋势线，画线有实时预览和趋势线端点。手动画线与会话中 `hyper_chart` 添加的标注按会话和币种保存，在该币种的所有周期展示；agent 添加或删除后，打开的图表通常在下一次宿主事件轮询（约 1 秒）更新。明确点击 K 线、成交量柱或指标线，会在输入框里插入一个引用标签（如 `BTC 15m 10-15 13:45 · C 81397`）；拖动图表不会引用。发送时标签展开为该点的完整 OHLC、量能与指标数据；点击标签可回到图上的那根 K 线。 「指标」菜单还可叠加最多 8 条可配置均线：SMA / EMA / SMMA（平滑均线，即 TradingView 的 RMA）/ WMA，周期 1–500，价格源可选 close / open / high / low / hl2 / hlc3 / ohlc4，并可再套一层平滑（虚线），算法与 TradingView Pine 一致；图例实时显示数值，agent 也能用 `hyper_chart` 把均线画到图上。
 - **导航与导出**：图表下方可查看最近 1/5/30 天、适应已加载全部数据、跳转到本地时间指定的日期，或回到最新行情；历史不足会自动补取，并在到达数据边界时提示。导出菜单可保存含画线和指标的 PNG，或导出已加载原始 OHLCV 的 CSV（UTC 时间）。指标图例与成交量跟随十字光标；VWAP 使用 UTC 每日重置的 HLC3 成交量加权价格，首日历史不全时不展示该日不完整结果。
-- **画线工具**：工具栏「画线」菜单按 TradingView 的分组提供 41 种工具——线条：趋势线、射线、延长线、信息线（涨跌 / 根数 / 时长 / 角度）、趋势角度、水平线、水平射线、十字线、垂直线；通道：平行通道、安德鲁叉子线、Schiff 与改良 Schiff 叉子线、回归趋势（收盘价最小二乘 ±2σ）、固定范围成交量分布（按价格统计区间成交量，标出 POC 与价值区 VAH / VAL，可调行数与价值区比例；斐波那契回撤、扩展和通道可在浮动工具条自定义层级；由 K 线估算，区间早于已加载历史时自动补加载并提示）；斐波那契与江恩：斐波那契回撤、趋势斐波那契扩展、斐波那契通道、斐波那契时间周期、江恩箱、江恩方格、江恩扇形；形态：艾略特推动浪（0-5）与调整浪（A-B-C）、XABCD 谐波与 ABCD（自动标注斐波那契比值）、头肩形态（含颈线）；形状：矩形、圆形、三角形、画笔；标注：文本、标注气泡、价格标签、箭头、图标；测量与头寸：价格区间、日期区间、日期与价格区间、多头 / 空头头寸（止盈默认 2R，显示 R:R）。点击过程中实时预览，Esc 取消，按住 Shift 把方向约束为水平或 45°；磁吸可选关 / 弱 / 强，吸附到 K 线开高低收。
+- **画线工具**：工具栏「画线」菜单按 TradingView 的分组提供 72 种工具（菜单顶部可搜索）——线条：趋势线、射线、延长线、信息线（涨跌 / 根数 / 时长 / 角度）、趋势角度、水平线、水平射线、十字线、垂直线；通道：平行通道、安德鲁叉子线、Schiff 与改良 Schiff 叉子线、回归趋势（收盘价最小二乘 ±2σ）、固定范围成交量分布（按价格统计区间成交量，标出 POC 与价值区 VAH / VAL，可调行数与价值区比例；斐波那契回撤、扩展和通道可在浮动工具条自定义层级；由 K 线估算，区间早于已加载历史时自动补加载并提示）；斐波那契与江恩：斐波那契回撤、趋势斐波那契扩展、斐波那契通道、斐波那契时间周期、江恩箱、江恩方格、江恩扇形；形态：艾略特推动浪（0-5）与调整浪（A-B-C）、XABCD 谐波与 ABCD（自动标注斐波那契比值）、头肩形态（含颈线）；形状：矩形、圆形、三角形、画笔；标注：文本、标注气泡、价格标签、箭头、图标；测量与头寸：价格区间、日期区间、日期与价格区间、多头 / 空头头寸（止盈默认 2R，显示 R:R）；0.5.0 新增：平顶 / 平底通道、分离通道、斐波那契速度阻力扇 / 圆 / 弧 / 楔形 / 基于趋势的时间、Cypher、三驱、三角形态、艾略特三角浪与双重 / 三重组合、周期线、正弦线、椭圆、旋转矩形、弧线、曲线、便签、价格便签、路标、预测、锚定 VWAP、锚定成交量分布；0.5.1 新增：荧光笔、路径（逐点点击，双击或 Enter 结束）、折线、图钉、斐波那契螺旋、K 线形态（复制一段 K 线的形状到别处）。点击过程中实时预览，Esc 取消，按住 Shift 把方向约束为水平或 45°；磁吸可选关 / 弱 / 强，吸附到 K 线开高低收。
 - **编辑与管理画线**：点选后拖动锚点改形状、拖动线身整体移动；浮动工具条可通过齿轮精确编辑锚点时间、价格和名称，改颜色、线宽、线型，复制，设为该工具的默认样式（之后新画的同类线自动套用），锁定或删除。按住 Shift 或 Ctrl/Cmd 点击可多选，多选后整组拖动、改色、隐藏、锁定或删除（一步撤销）。快捷键：Alt+T 趋势线、Alt+H 水平线、Alt+J 水平射线、Alt+V 垂直线、Alt+C 十字线、Alt+F 斐波那契回撤、Alt+Shift+R 矩形；画线时按住 Ctrl/Cmd 临时反转磁吸，吸附点显示提示圈；Esc 逐层退出（取消当前拖动或工具 → 取消选择 → 退出放大图表）。Delete 删除，Ctrl/Cmd+C、V 复制粘贴，Ctrl/Cmd+Z 撤销、Shift+Ctrl/Cmd+Z 重做（新建、修改、删除和批量删除都可撤销）。图表下方的画线列表可逐条定位、显示 / 隐藏、锁定或删除；菜单里还有连续绘制、锁定所有画线和删除所有画线。点击菜单中的星标可收藏最多 12 个工具，图表上方显示常用画线快捷栏；收藏保存在当前浏览器。画线锚定在时间与价格上，平移、缩放、切换刻度和加载历史时始终贴合 K 线，也可延伸到最新 K 线右侧的空白区域；画线按会话和币种保存，切换会话随之切换，重启后保留，agent 用 `hyper_chart` 新增或修改的画线会实时出现在打开的图表上。
 - **同步、提醒与贴图**：浮动工具条可把画线「同步到所有会话」（该币种的每个交易会话都显示同一条线，任一会话可修改，重启后保留），水平线、水平射线、趋势线、射线和延长线可开启「价格提醒」——宿主持续监控中价，穿越画线时交易台弹出提醒，提醒触发一次后自动关闭，可再次开启。图标工具附贴图库：18 个内置图标、交易 / 表情 / 符号三类约 60 个贴纸，也可输入或粘贴任意一个 emoji 作为贴纸。每张图（会话 + 币种，跨周期合计）最多 100 条画线。
 - **成交与决策原因**：每笔成交在图上的成交价位置打点（买绿卖红），有 AI 决策原因的点带圆环；点击查看方向、数量、价格、时间和当时的决策原因，「显示 → 成交原因」可把原因标签直接显示在图上。「回到决策会话分析」会切换到做出这笔决策的交易会话，并把成交与原因作为复盘引用放进输入框。
@@ -109,7 +109,7 @@ dsh plugin --profile web add dsh-web3
 |---|---|
 | `hyper_context` | 一次读取当前会话的币对、盘口、K 线、账户权益、仓位与风险限额 |
 | `hyper_market` | 行情：overview / book / candles / trades / catalog / indicators（SMA、EMA、RSI、MACD、布林带、ATR、Stochastic、ADX/DMI、OBV、支撑阻力，以及图上均线或指定均线的最新值） |
-| `hyper_chart` | 在会话图表上添加、修改（几何 / 颜色 / 线宽 / 线型 / 锁定 / 隐藏）或删除画线（41 种，含固定范围成交量分布、斐波那契、江恩、叉子线、回归、艾略特与谐波形态、标注与多空头寸；可设置同步到所有会话与价格提醒）和均线（SMA / EMA / SMMA / WMA，可选平滑）；`action=view` 切换图表周期并显示 / 隐藏 RSI、MACD 等副图指标 |
+| `hyper_chart` | 在会话图表上添加、修改（几何 / 颜色 / 线宽 / 线型 / 锁定 / 隐藏）或删除画线（72 种，含固定范围成交量分布、斐波那契、江恩、叉子线、回归、艾略特与谐波形态、标注与多空头寸；可设置同步到所有会话与价格提醒）和均线（SMA / EMA / SMMA / WMA，可选平滑）；`action=view` 切换图表周期并显示 / 隐藏 RSI、MACD 等副图指标 |
 | `hyper_account` | 账户：state / orders / fills / orderStatus（支持 oid、cloid）/ review（窗口证据、成本及订单核对） |
 | `hyper_decide` | 实盘预检：提交交易意图与依据，返回 30 秒内有效的一次性 `decisionId` |
 | `hyper_order` | place / cancel / leverage；实盘下单必须带匹配的 `decisionId`，可附带止盈止损（目前仅测试网） |

package/client.js

@@ -952,6 +952,28 @@ body:has(.dhl-divider.dragging) * { cursor: col-resize !important; }
 /* Touch: the chart owns every gesture inside it (anchor and drawing drags, pans), as TradingView does;
    otherwise the browser claims a finger drag for scrolling and cancels the pointer mid-drag. */
 .dhl-chart, .dhl-chart-drawing-overlay, .dhl-chart-drawing-overlay * { touch-action: none; }
+
+/* 0.5.0 tools: curves, ellipses, Fibonacci rings, notes and signposts. */
+.dhl-drawing .dhl-curve, .dhl-drawing .dhl-fib-ring { fill: none; stroke: currentColor; stroke-width: var(--dhl-line-width, 1.6); stroke-dasharray: var(--dhl-dash, none); }
+.dhl-drawing .dhl-fib-ring { stroke-width: 1.2; opacity: .85; }
+.dhl-drawing ellipse.dhl-drawing-fill { fill: currentColor; fill-opacity: var(--dhl-fill-opacity, .08); stroke: currentColor; stroke-width: var(--dhl-line-width, 1.5); stroke-dasharray: var(--dhl-dash, none); }
+.dhl-drawing rect.dhl-drawing-mid { fill: none; stroke: currentColor; }
+.dhl-drawing-hit .dhl-curve, .dhl-drawing-hit .dhl-fib-ring { pointer-events: stroke; }
+.dhl-drawing .dhl-note-box { fill: color-mix(in srgb, #e2b93b 22%, var(--dsw-alias-bg-layer-1)); stroke: color-mix(in srgb, #e2b93b 70%, transparent); }
+.dhl-drawing .dhl-signpost > line { stroke-width: 1.6; }
+
+/* Moved below the drawing when the top position would cover its anchors (above the time axis). */
+.dhl-draw-toolbar.at-bottom { top: auto; bottom: 40px; }
+
+/* Search at the top of the drawing menu (stays visible while the list scrolls). */
+.dhl-draw-popover .dhl-draw-search { position: sticky; top: -6px; z-index: 1; width: 100%; box-sizing: border-box; margin: -6px 0 4px; padding: 8px 10px; border: 0; border-bottom: 1px solid var(--dsw-alias-border-l1); background: var(--dsw-alias-bg-layer-1); color: var(--dsw-alias-label-primary); font: inherit; font-size: 12px; outline: none; }
+.dhl-draw-popover .dhl-draw-empty { margin: 10px 8px; color: var(--dsw-alias-label-secondary); font-size: 11.5px; }
+
+/* 0.5.1: highlighter, pin, copied bars. */
+.dhl-drawing .dhl-highlighter { stroke-width: calc(var(--dhl-line-width, 2) * 6); stroke-opacity: .32; }
+.dhl-drawing .dhl-pin-glyph { fill: currentColor; fill-opacity: .25; stroke: currentColor; stroke-width: 2; }
+.dhl-drawing .dhl-bars-copy { fill: none; stroke: currentColor; stroke-width: 1.3; opacity: .8; }
+.dhl-drawing-hit .dhl-bars-copy, .dhl-drawing-hit .dhl-pin-glyph { pointer-events: stroke; }
 `;
 
 // src/client/locale.ts
@@ -17695,8 +17717,44 @@ var DRAWING_POINTS = {
   gannsquare: 2,
   schiff: 3,
   modschiff: 3,
-  icon: 1
+  icon: 1,
+  // TradingView's remaining common tools (0.5.0).
+  flatchannel: 3,
+  disjoint: 3,
+  fibfan: 2,
+  fibcircles: 2,
+  fibarcs: 2,
+  fibwedge: 3,
+  fibtrendtime: 3,
+  cypher: 5,
+  threedrives: 6,
+  tripattern: 4,
+  elliotttri: 6,
+  elliottwxy: 4,
+  elliottwxyxz: 6,
+  cycles: 2,
+  sine: 2,
+  ellipse: 2,
+  rotrect: 3,
+  arc: 3,
+  curve: 3,
+  note: 1,
+  pricenote: 2,
+  signpost: 1,
+  avwap: 1,
+  avprofile: 1,
+  forecast: 2,
+  // Freehand highlighter (0 = variable, like brush); path / polyline take clicks until a double-click or Enter.
+  highlighter: 0,
+  path: 0,
+  polyline: 0,
+  pin: 1,
+  fibspiral: 2,
+  barspattern: 3
 };
+var FREEHAND_KINDS = ["brush", "highlighter"];
+var MULTI_KINDS = ["path", "polyline"];
+var PATH_MAX = 50;
 var ICON_NAMES = ["flag", "star", "up", "down", "warning", "check", "cross", "fire", "target", "bell", "pin", "clock", "dollar", "shield", "bolt", "heart", "question", "info"];
 var STICKERS = {
   trading: ["\u{1F4C8}", "\u{1F4C9}", "\u{1F4B0}", "\u{1F4B8}", "\u{1F680}", "\u{1F3AF}", "\u{1F525}", "\u{1F48E}", "\u{1F402}", "\u{1F43B}", "\u{1F40B}", "\u{1F6A8}", "\u{1F514}", "\u23F0", "\u{1F4CC}", "\u{1F9ED}", "\u{1F6D1}", "\u{1F3E6}", "\u2696\uFE0F", "\u{1FA99}"],
@@ -17708,8 +17766,8 @@ function isSingleEmoji(value) {
   if (typeof value !== "string" || !value || value.length > 32 || !/\p{Extended_Pictographic}|\p{Regional_Indicator}/u.test(value)) return false;
   return [...new Intl.Segmenter(void 0, { granularity: "grapheme" }).segment(value)].length === 1;
 }
-var FONT_KINDS = ["text", "callout"];
-var FILL_KINDS = ["rect", "circle", "triangle", "channel", "fib", "regression", "gannbox", "pricerange", "daterange", "measure"];
+var FONT_KINDS = ["text", "callout", "note", "pricenote", "signpost"];
+var FILL_KINDS = ["rect", "circle", "triangle", "channel", "fib", "regression", "gannbox", "pricerange", "daterange", "measure", "flatchannel", "disjoint", "ellipse", "rotrect"];
 var FIB_LEVEL_KINDS = ["fib", "fibext", "fibchannel"];
 function volumeProfile(bars, { rows = 48, valueArea = 0.7 } = {}) {
   const valid = bars.filter((bar) => [bar.open, bar.high, bar.low, bar.close, bar.volume].every(Number.isFinite) && bar.high >= bar.low && bar.volume >= 0);
@@ -17755,7 +17813,7 @@ var GANN_BOX_LEVELS = [0, 0.25, 0.382, 0.5, 0.618, 0.75, 1];
 var ALERT_KINDS = ["level", "hray", "trend", "ray", "extended"];
 var BRUSH_MIN = 2;
 var BRUSH_MAX = 500;
-var TEXT_KINDS = ["text", "callout"];
+var TEXT_KINDS = ["text", "callout", "note", "pricenote", "signpost", "pin"];
 var DRAWING_CLICKS = { ...Object.fromEntries(Object.entries(DRAWING_POINTS)), long: 2, short: 2 };
 var DRAWING_KINDS = Object.keys(DRAWING_POINTS);
 var FIB_LEVELS = [0, 0.236, 0.382, 0.5, 0.618, 0.786, 1];
@@ -17785,11 +17843,15 @@ function drawingGeometry(kind, request, now = Date.now()) {
   }
   const need = DRAWING_POINTS[kind];
   const raw = request?.points;
-  if (kind === "brush") {
-    if (!Array.isArray(raw) || raw.length < BRUSH_MIN || raw.length > BRUSH_MAX) throw new Error(`brush \u9700\u8981 ${BRUSH_MIN}-${BRUSH_MAX} \u4E2A points`);
+  if (FREEHAND_KINDS.includes(kind)) {
+    if (!Array.isArray(raw) || raw.length < BRUSH_MIN || raw.length > BRUSH_MAX) throw new Error(`${kind} \u9700\u8981 ${BRUSH_MIN}-${BRUSH_MAX} \u4E2A points`);
+  } else if (MULTI_KINDS.includes(kind)) {
+    if (!Array.isArray(raw) || raw.length < 2 || raw.length > PATH_MAX) throw new Error(`${kind} \u9700\u8981 2-${PATH_MAX} \u4E2A points`);
   } else if (!Array.isArray(raw) || raw.length !== need) throw new Error(`${kind} \u9700\u8981 ${need} \u4E2A points\uFF08{ time, price }\uFF09`);
   const points2 = raw.map((item, index) => point(item?.time, item?.price, `\u7B2C ${index + 1} \u4E2A\u70B9`));
-  if (["trend", "ray", "extended", "channel", "fibchannel", "gannfan", "regression", "fibtime", "infoline", "trendangle"].includes(kind) && points2[0].time === points2[1].time) throw new Error("\u524D\u4E24\u4E2A\u70B9\u7684\u65F6\u95F4\u4E0D\u80FD\u76F8\u540C");
+  if (["trend", "ray", "extended", "channel", "fibchannel", "gannfan", "regression", "fibtime", "infoline", "trendangle", "flatchannel", "disjoint", "fibfan", "fibtrendtime", "cycles", "sine", "forecast"].includes(kind) && points2[0].time === points2[1].time) throw new Error("\u524D\u4E24\u4E2A\u70B9\u7684\u65F6\u95F4\u4E0D\u80FD\u76F8\u540C");
+  if ((kind === "cycles" || kind === "sine" || kind === "fibtrendtime") && points2[1].time < points2[0].time) throw new Error("\u7B2C\u4E8C\u4E2A\u70B9\u5FC5\u987B\u665A\u4E8E\u7B2C\u4E00\u4E2A\u70B9");
+  if (kind === "barspattern" && points2[1].time <= points2[0].time) throw new Error("K \u7EBF\u5F62\u6001\u7684\u6E90\u533A\u95F4\u7EC8\u70B9\u5FC5\u987B\u665A\u4E8E\u8D77\u70B9");
   if (kind === "vprofile") {
     if (points2[0].time === points2[1].time) throw new Error("\u6210\u4EA4\u91CF\u5206\u5E03\u9700\u8981\u4E00\u4E2A\u65F6\u95F4\u533A\u95F4");
     if (points2[1].time < points2[0].time) points2.reverse();
@@ -17817,6 +17879,8 @@ var DRAWING_TOOLS = [
   { group: "lines", kind: "crossline", zh: "\u5341\u5B57\u7EBF", en: "Cross line", hintZh: "\u5355\u51FB\u653E\u7F6E\u6C34\u5E73\u4E0E\u5782\u76F4\u4EA4\u53C9\u7EBF\uFF08Alt+C\uFF09", hintEn: "Click to place a horizontal and vertical cross (Alt+C)", icon: "M12 3v18M3 12h18" },
   { group: "lines", kind: "vline", zh: "\u5782\u76F4\u7EBF", en: "Vertical line", hintZh: "\u5355\u51FB\u6807\u8BB0\u65F6\u95F4\uFF08Alt+V\uFF09", hintEn: "Click to mark a time (Alt+V)", icon: "M12 3v18" },
   { group: "channels", kind: "channel", zh: "\u5E73\u884C\u901A\u9053", en: "Parallel channel", hintZh: "\u70B9\u51FB\u4E24\u70B9\u753B\u57FA\u7EBF\uFF0C\u7B2C\u4E09\u70B9\u8BBE\u7F6E\u901A\u9053\u5BBD\u5EA6", hintEn: "Two points for the base, a third for width", icon: "M3 15 15 5M9 19 21 9" },
+  { group: "channels", kind: "flatchannel", zh: "\u5E73\u9876/\u5E73\u5E95\u901A\u9053", en: "Flat top/bottom", hintZh: "\u4E24\u70B9\u753B\u8D8B\u52BF\u8FB9\uFF0C\u7B2C\u4E09\u70B9\u8BBE\u7F6E\u6C34\u5E73\u8FB9\u7684\u4EF7\u683C", hintEn: "Two points for the sloped side, a third for the flat side", icon: "M3 18 21 8M3 5h18" },
+  { group: "channels", kind: "disjoint", zh: "\u5206\u79BB\u901A\u9053", en: "Disjoint channel", hintZh: "\u4E24\u70B9\u753B\u7B2C\u4E00\u6761\u8FB9\uFF0C\u7B2C\u4E09\u70B9\u653E\u7F6E\u659C\u7387\u76F8\u53CD\u7684\u7B2C\u4E8C\u6761\u8FB9", hintEn: "Two points for one side; a third places the mirrored side", icon: "M3 16 21 6M3 9l18 10" },
   { group: "channels", kind: "pitchfork", zh: "\u5B89\u5FB7\u9C81\u53C9\u5B50\u7EBF", en: "Pitchfork", hintZh: "\u70B9\u51FB\u67A2\u8F74\u70B9\uFF0C\u518D\u70B9\u51FB\u6CE2\u6BB5\u9AD8\u70B9\u4E0E\u4F4E\u70B9", hintEn: "Click the pivot, then the swing high and low", icon: "M4 20 12 4M12 4l8 8M12 4 4 12M8 16l12-4" },
   { group: "channels", kind: "schiff", zh: "Schiff \u53C9\u5B50\u7EBF", en: "Schiff pitchfork", hintZh: "\u540C\u53C9\u5B50\u7EBF\uFF0C\u8D77\u70B9\u79FB\u5230 A\u3001B \u4EF7\u683C\u4E2D\u70B9", hintEn: "Pitchfork with the handle at A\u2013B price midpoint", icon: "M4 14 12 4M12 4l8 8M12 4 4 12M8 16l12-4" },
   { group: "channels", kind: "modschiff", zh: "\u6539\u826F Schiff \u53C9\u5B50\u7EBF", en: "Modified Schiff pitchfork", hintZh: "\u540C\u53C9\u5B50\u7EBF\uFF0C\u8D77\u70B9\u79FB\u5230 A\u3001B \u65F6\u95F4\u4E0E\u4EF7\u683C\u4E2D\u70B9", hintEn: "Pitchfork with the handle at the A\u2013B midpoint", icon: "M6 12 12 4M12 4l8 8M12 4 4 12M8 16l12-4" },
@@ -17826,6 +17890,12 @@ var DRAWING_TOOLS = [
   { group: "fib", kind: "fibext", zh: "\u6590\u6CE2\u90A3\u5951\u6269\u5C55", en: "Trend-based fib extension", hintZh: "\u70B9\u51FB\u6CE2\u6BB5\u8D77\u70B9\u3001\u7EC8\u70B9\uFF0C\u518D\u70B9\u51FB\u56DE\u64A4\u70B9\uFF0C\u81EA\u56DE\u64A4\u70B9\u6295\u5C04", hintEn: "Swing start, swing end, then the retracement point", icon: "M3 20 9 6l6 9M15 4h7M15 8h7M15 12h7" },
   { group: "fib", kind: "fibchannel", zh: "\u6590\u6CE2\u90A3\u5951\u901A\u9053", en: "Fib channel", hintZh: "\u4E24\u70B9\u753B\u57FA\u7EBF\uFF0C\u7B2C\u4E09\u70B9\u8BBE\u7F6E\u901A\u9053\u5BBD\u5EA6", hintEn: "Two points for the base, a third for width", icon: "M3 19 21 9M3 15 21 5M3 11 21 1" },
   { group: "fib", kind: "fibtime", zh: "\u6590\u6CE2\u90A3\u5951\u65F6\u95F4\u5468\u671F", en: "Fib time zone", hintZh: "\u70B9\u51FB\u4E24\u70B9\u786E\u5B9A\u5355\u4F4D\u95F4\u9694", hintEn: "Click two points to set the unit spacing", icon: "M4 3v18M7 3v18M10 3v18M15 3v18M22 3v18" },
+  { group: "fib", kind: "fibfan", zh: "\u6590\u6CE2\u90A3\u5951\u901F\u5EA6\u963B\u529B\u6247", en: "Fib speed resistance fan", hintZh: "\u70B9\u51FB\u539F\u70B9\uFF0C\u518D\u70B9\u51FB\u5BF9\u89D2\uFF0C\u6309\u4EF7\u683C\u4E0E\u65F6\u95F4\u6BD4\u4F8B\u753B\u6247\u7EBF", hintEn: "Click the origin, then the opposite corner", icon: "M3 21 21 3M3 21 21 9M3 21 21 15M3 21 9 3M3 21 15 3" },
+  { group: "fib", kind: "fibcircles", zh: "\u6590\u6CE2\u90A3\u5951\u5706", en: "Fib circles", hintZh: "\u70B9\u51FB\u5706\u5FC3\uFF0C\u518D\u70B9\u51FB\u786E\u5B9A 1.0 \u534A\u5F84", hintEn: "Click the center, then the 1.0 radius", icon: "M12 7a5 5 0 1 0 0 10 5 5 0 0 0 0-10zM12 3a9 9 0 1 0 0 18 9 9 0 0 0 0-18z" },
+  { group: "fib", kind: "fibarcs", zh: "\u6590\u6CE2\u90A3\u5951\u5F27", en: "Fib speed resistance arcs", hintZh: "\u70B9\u51FB\u6CE2\u6BB5\u8D77\u70B9\uFF0C\u518D\u70B9\u51FB\u7EC8\u70B9\uFF0C\u4EE5\u7EC8\u70B9\u4E3A\u5706\u5FC3\u753B\u5F27", hintEn: "Click the swing start, then the end (arcs center on the end)", icon: "M4 20a8 8 0 0 1 16 0M8 20a4 4 0 0 1 8 0" },
+  { group: "fib", kind: "fibwedge", zh: "\u6590\u6CE2\u90A3\u5951\u6954\u5F62", en: "Fib wedge", hintZh: "\u70B9\u51FB\u9876\u70B9\uFF0C\u518D\u70B9\u51FB\u4E24\u6761\u8FB9\u7684\u7AEF\u70B9", hintEn: "Click the apex, then the ends of the two sides", icon: "M3 12 21 4M3 12l18 8M15 6.7a7 7 0 0 1 0 10.6" },
+  { group: "fib", kind: "fibtrendtime", zh: "\u57FA\u4E8E\u8D8B\u52BF\u7684\u6590\u6CE2\u90A3\u5951\u65F6\u95F4", en: "Trend-based fib time", hintZh: "\u4E24\u70B9\u786E\u5B9A\u8D8B\u52BF\u65F6\u957F\uFF0C\u7B2C\u4E09\u70B9\u8D77\u6309\u6BD4\u4F8B\u753B\u65F6\u95F4\u7EBF", hintEn: "Two points set the trend duration; lines start at the third", icon: "M3 18 9 6M12 3v18M16 3v18M21 3v18" },
+  { group: "fib", kind: "fibspiral", zh: "\u6590\u6CE2\u90A3\u5951\u87BA\u65CB", en: "Fib spiral", hintZh: "\u70B9\u51FB\u4E2D\u5FC3\uFF0C\u518D\u70B9\u51FB\u786E\u5B9A\u8D77\u59CB\u534A\u5F84\u4E0E\u65B9\u5411\uFF08\u6BCF\u56DB\u5206\u4E4B\u4E00\u5708\u653E\u5927 1.618 \u500D\uFF09", hintEn: "Click the center, then the starting radius (grows 1.618\xD7 per quarter turn)", icon: "M12 12a2 2 0 1 1 2-2c0 3-3 5-6 4s-5-5-3-8 7-5 10-3 5 7 3 11" },
   { group: "fib", kind: "gannbox", zh: "\u6C5F\u6069\u7BB1", en: "Gann box", hintZh: "\u70B9\u51FB\u4E24\u4E2A\u5BF9\u89D2\uFF0C\u6309 0.25/0.382/0.5/0.618/0.75 \u5206\u5272", hintEn: "Click two corners; divided at Gann levels", icon: "M4 4h16v16H4zM4 12h16M12 4v16M4 4l16 16" },
   { group: "fib", kind: "gannsquare", zh: "\u6C5F\u6069\u65B9\u683C", en: "Gann square", hintZh: "\u70B9\u51FB\u4E24\u4E2A\u5BF9\u89D2\uFF0C\u753B\u56DB\u5206\u7F51\u683C\u3001\u5BF9\u89D2\u7EBF\u4E0E\u6247\u7EBF", hintEn: "Click two corners; quarters, diagonals and fans", icon: "M4 4h16v16H4zM4 4l16 16M20 4 4 20M4 12h16M12 4v16" },
   { group: "fib", kind: "gannfan", zh: "\u6C5F\u6069\u6247\u5F62", en: "Gann fan", hintZh: "\u70B9\u51FB\u539F\u70B9\uFF0C\u518D\u70B9\u51FB\u786E\u5B9A 1\xD71 \u7EBF", hintEn: "Click the origin, then a point on the 1\xD71 line", icon: "M3 21 21 3M3 21 21 12M3 21 12 3M3 21h18" },
@@ -17833,19 +17903,42 @@ var DRAWING_TOOLS = [
   { group: "patterns", kind: "elliottabc", zh: "\u827E\u7565\u7279\u8C03\u6574\u6D6A", en: "Elliott correction wave", hintZh: "\u4F9D\u6B21\u70B9\u51FB 0\u3001A\u3001B\u3001C \u56DB\u4E2A\u70B9", hintEn: "Click 0, A, B, C", icon: "M3 6l6 10 5-6 7 10" },
   { group: "patterns", kind: "xabcd", zh: "XABCD \u8C10\u6CE2", en: "XABCD pattern", hintZh: "\u4F9D\u6B21\u70B9\u51FB X\u3001A\u3001B\u3001C\u3001D\uFF0C\u663E\u793A\u6590\u6CE2\u90A3\u5951\u6BD4\u503C", hintEn: "Click X, A, B, C, D; shows Fibonacci ratios", icon: "M2 18 7 5l4 9 5-7 6 12M2 18l9-4M11 14l11 5" },
   { group: "patterns", kind: "abcd", zh: "ABCD \u5F62\u6001", en: "ABCD pattern", hintZh: "\u4F9D\u6B21\u70B9\u51FB A\u3001B\u3001C\u3001D", hintEn: "Click A, B, C, D", icon: "M3 19 9 6l5 8 7-10" },
+  { group: "patterns", kind: "cypher", zh: "Cypher \u5F62\u6001", en: "Cypher pattern", hintZh: "\u4F9D\u6B21\u70B9\u51FB X\u3001A\u3001B\u3001C\u3001D\uFF0C\u663E\u793A B \u56DE\u64A4\u3001C \u6269\u5C55\u4E0E D \u5BF9 XC \u7684\u56DE\u64A4", hintEn: "Click X, A, B, C, D; shows B, C and XC ratios", icon: "M2 17 7 5l4 8 4-10 7 15M2 17l9-4" },
+  { group: "patterns", kind: "threedrives", zh: "\u4E09\u9A71\u5F62\u6001", en: "Three drives pattern", hintZh: "\u4F9D\u6B21\u70B9\u51FB\u8D77\u70B9\u3001\u9A71\u52A8 1\u3001A\u3001\u9A71\u52A8 2\u3001B\u3001\u9A71\u52A8 3", hintEn: "Click start, drive 1, A, drive 2, B, drive 3", icon: "M2 20 6 13l3 3 4-8 3 3 5-8" },
+  { group: "patterns", kind: "tripattern", zh: "\u4E09\u89D2\u5F62\u6001", en: "Triangle pattern", hintZh: "\u4F9D\u6B21\u70B9\u51FB A\u3001B\u3001C\u3001D\uFF0C\u8FDE\u7EBF\u5E76\u5EF6\u957F\u4E0A\u4E0B\u8FB9", hintEn: "Click A, B, C, D; the sides extend to the apex", icon: "M3 4 9 18l5-10 4 6M3 4l18 6M9 18l12-6" },
+  { group: "patterns", kind: "elliotttri", zh: "\u827E\u7565\u7279\u4E09\u89D2\u6D6A", en: "Elliott triangle wave", hintZh: "\u4F9D\u6B21\u70B9\u51FB 0\u3001A\u3001B\u3001C\u3001D\u3001E", hintEn: "Click 0, A, B, C, D, E", icon: "M2 5l4 14 4-11 4 8 4-5 4 3" },
+  { group: "patterns", kind: "elliottwxy", zh: "\u827E\u7565\u7279\u53CC\u91CD\u7EC4\u5408", en: "Elliott double combo", hintZh: "\u4F9D\u6B21\u70B9\u51FB 0\u3001W\u3001X\u3001Y", hintEn: "Click 0, W, X, Y", icon: "M3 6l6 10 5-6 7 10" },
+  { group: "patterns", kind: "elliottwxyxz", zh: "\u827E\u7565\u7279\u4E09\u91CD\u7EC4\u5408", en: "Elliott triple combo", hintZh: "\u4F9D\u6B21\u70B9\u51FB 0\u3001W\u3001X\u3001Y\u3001X\u3001Z", hintEn: "Click 0, W, X, Y, X, Z", icon: "M2 6l4 8 3-4 4 7 3-4 6 9" },
+  { group: "patterns", kind: "cycles", zh: "\u5468\u671F\u7EBF", en: "Cyclic lines", hintZh: "\u70B9\u51FB\u4E24\u70B9\u786E\u5B9A\u5468\u671F\uFF0C\u5411\u540E\u7B49\u8DDD\u753B\u5782\u76F4\u7EBF", hintEn: "Click two points to set the period", icon: "M5 3v18M10 3v18M15 3v18M20 3v18" },
+  { group: "patterns", kind: "sine", zh: "\u6B63\u5F26\u7EBF", en: "Sine line", hintZh: "\u70B9\u51FB\u6CE2\u5CF0\uFF0C\u518D\u70B9\u51FB\u76F8\u90BB\u6CE2\u8C37", hintEn: "Click a peak, then the next trough", icon: "M2 12c2.5-8 5-8 7.5 0s5 8 7.5 0 3-5 5-4" },
   { group: "patterns", kind: "headshoulders", zh: "\u5934\u80A9\u5F62\u6001", en: "Head and shoulders", hintZh: "\u4F9D\u6B21\u70B9\u51FB\u5DE6\u5E95\u3001\u5DE6\u80A9\u3001\u9888\u7EBF\u70B9\u3001\u5934\u3001\u9888\u7EBF\u70B9\u3001\u53F3\u80A9\u3001\u53F3\u5E95", hintEn: "Click 7 points from left base to right base", icon: "M2 18l3-6 3 3 4-10 4 10 3-3 3 6M5 15h14" },
   { group: "shapes", kind: "rect", zh: "\u77E9\u5F62", en: "Rectangle", hintZh: "\u70B9\u51FB\u4E24\u4E2A\u5BF9\u89D2\uFF08Alt+Shift+R\uFF09", hintEn: "Click two opposite corners (Alt+Shift+R)", icon: "M4 6h16v12H4z" },
   { group: "shapes", kind: "circle", zh: "\u5706\u5F62", en: "Circle", hintZh: "\u70B9\u51FB\u5706\u5FC3\uFF0C\u518D\u70B9\u51FB\u8FB9\u7F18", hintEn: "Click the center, then the edge", icon: "M12 3a9 9 0 1 0 0 18 9 9 0 0 0 0-18z" },
   { group: "shapes", kind: "triangle", zh: "\u4E09\u89D2\u5F62", en: "Triangle", hintZh: "\u4F9D\u6B21\u70B9\u51FB\u4E09\u4E2A\u9876\u70B9", hintEn: "Click three corners", icon: "M12 4 21 20H3z" },
+  { group: "shapes", kind: "ellipse", zh: "\u692D\u5706", en: "Ellipse", hintZh: "\u70B9\u51FB\u5916\u63A5\u77E9\u5F62\u7684\u4E24\u4E2A\u5BF9\u89D2", hintEn: "Click two corners of its bounding box", icon: "M12 6c5 0 9 2.7 9 6s-4 6-9 6-9-2.7-9-6 4-6 9-6z" },
+  { group: "shapes", kind: "rotrect", zh: "\u65CB\u8F6C\u77E9\u5F62", en: "Rotated rectangle", hintZh: "\u4E24\u70B9\u753B\u4E00\u6761\u8FB9\uFF0C\u7B2C\u4E09\u70B9\u8BBE\u7F6E\u5BBD\u5EA6", hintEn: "Two points for one side, a third for the width", icon: "M4 14 14 4l6 6-10 10z" },
+  { group: "shapes", kind: "arc", zh: "\u5F27\u7EBF", en: "Arc", hintZh: "\u70B9\u51FB\u8D77\u70B9\u3001\u7EC8\u70B9\uFF0C\u518D\u70B9\u51FB\u5F27\u7EBF\u7ECF\u8FC7\u7684\u70B9", hintEn: "Click start, end, then a point on the arc", icon: "M3 18c3-10 15-10 18 0" },
+  { group: "shapes", kind: "curve", zh: "\u66F2\u7EBF", en: "Curve", hintZh: "\u70B9\u51FB\u8D77\u70B9\u3001\u7EC8\u70B9\uFF0C\u518D\u70B9\u51FB\u63A7\u5236\u70B9", hintEn: "Click start, end, then the control point", icon: "M3 18C8 2 14 22 21 6" },
+  { group: "shapes", kind: "highlighter", zh: "\u8367\u5149\u7B14", en: "Highlighter", hintZh: "\u6309\u4F4F\u9F20\u6807\u62D6\u52A8\uFF0C\u753B\u534A\u900F\u660E\u7C97\u7EBF", hintEn: "Press and drag; a wide translucent stroke", icon: "M4 16c4-5 7 1 11-3s5-3 6-2M3 21h8" },
+  { group: "shapes", kind: "path", zh: "\u8DEF\u5F84", en: "Path", hintZh: "\u9010\u70B9\u70B9\u51FB\uFF0C\u53CC\u51FB\u6216\u6309 Enter \u7ED3\u675F\uFF0C\u672B\u7AEF\u5E26\u7BAD\u5934", hintEn: "Click point by point; double-click or Enter to finish (arrow at the end)", icon: "M3 18 8 9l5 6 8-10M17 5h4v4" },
+  { group: "shapes", kind: "polyline", zh: "\u6298\u7EBF", en: "Polyline", hintZh: "\u9010\u70B9\u70B9\u51FB\uFF0C\u53CC\u51FB\u6216\u6309 Enter \u7ED3\u675F", hintEn: "Click point by point; double-click or Enter to finish", icon: "M3 18 8 9l5 6 8-10" },
   { group: "shapes", kind: "brush", zh: "\u753B\u7B14", en: "Brush", hintZh: "\u6309\u4F4F\u9F20\u6807\u62D6\u52A8\u81EA\u7531\u7ED8\u5236", hintEn: "Press and drag to draw freehand", icon: "M3 17c3-6 5 2 8-3s4-6 7-4 3 4 3 4" },
   { group: "annotation", kind: "text", zh: "\u6587\u672C", en: "Text", hintZh: "\u5355\u51FB\u4F4D\u7F6E\u540E\u8F93\u5165\u6587\u5B57", hintEn: "Click a spot, then type", icon: "M5 6h14M12 6v13M9 19h6" },
   { group: "annotation", kind: "callout", zh: "\u6807\u6CE8\u6C14\u6CE1", en: "Callout", hintZh: "\u70B9\u51FB\u8981\u6807\u6CE8\u7684\u4F4D\u7F6E\uFF0C\u518D\u70B9\u51FB\u6587\u672C\u6846\u4F4D\u7F6E\uFF0C\u7136\u540E\u8F93\u5165\u6587\u5B57", hintEn: "Click the target, then the box, then type", icon: "M4 4h16v10H10l-4 5v-5H4z" },
+  { group: "annotation", kind: "note", zh: "\u4FBF\u7B7E", en: "Note", hintZh: "\u5355\u51FB\u4F4D\u7F6E\u540E\u8F93\u5165\u4FBF\u7B7E\u5185\u5BB9", hintEn: "Click a spot, then type the note", icon: "M5 4h14v11l-5 5H5zM14 20v-5h5" },
+  { group: "annotation", kind: "pricenote", zh: "\u4EF7\u683C\u4FBF\u7B7E", en: "Price note", hintZh: "\u70B9\u51FB\u8981\u6807\u6CE8\u7684\u4EF7\u683C\uFF0C\u518D\u70B9\u51FB\u4FBF\u7B7E\u4F4D\u7F6E\uFF0C\u7136\u540E\u8F93\u5165\u6587\u5B57", hintEn: "Click the price, then the note position, then type", icon: "M3 16h6M9 16l4-6h8v8h-8z" },
+  { group: "annotation", kind: "signpost", zh: "\u8DEF\u6807", en: "Signpost", hintZh: "\u5355\u51FB K \u7EBF\u4F4D\u7F6E\u540E\u8F93\u5165\u8DEF\u6807\u6587\u5B57", hintEn: "Click a bar, then type the signpost text", icon: "M8 21V4M8 4h11l-2 3 2 3H8" },
+  { group: "annotation", kind: "pin", zh: "\u56FE\u9489", en: "Pin", hintZh: "\u5355\u51FB\u4F4D\u7F6E\u540E\u8F93\u5165\u8BF4\u660E\uFF0C\u56FE\u4E0A\u663E\u793A\u56FE\u9489\u548C\u8BF4\u660E", hintEn: "Click a spot, then type; shows a pin with its note", icon: "M12 21s-6-5.6-6-10a6 6 0 0 1 12 0c0 4.4-6 10-6 10zM12 8.5a2.5 2.5 0 1 0 0 5 2.5 2.5 0 0 0 0-5z" },
   { group: "annotation", kind: "pricelabel", zh: "\u4EF7\u683C\u6807\u7B7E", en: "Price label", hintZh: "\u5355\u51FB\u5728\u8BE5\u4EF7\u683C\u5904\u653E\u7F6E\u6807\u7B7E", hintEn: "Click to tag a price", icon: "M3 12l5-6h13v12H8z" },
   { group: "annotation", kind: "icon", zh: "\u56FE\u6807", en: "Icon", hintZh: "\u5355\u51FB\u4F4D\u7F6E\u540E\u9009\u62E9\u56FE\u6807", hintEn: "Click a spot, then pick an icon", icon: "M12 3l2.6 5.6 6 .7-4.5 4.1 1.2 6L12 16.6 6.7 19.4l1.2-6L3.4 9.3l6-.7z" },
   { group: "annotation", kind: "arrow", zh: "\u7BAD\u5934", en: "Arrow", hintZh: "\u70B9\u51FB\u8D77\u70B9\u548C\u7BAD\u5934\u6307\u5411\u7684\u4F4D\u7F6E", hintEn: "Click tail, then head", icon: "M4 20 20 4M12 4h8v8" },
   { group: "measure", kind: "pricerange", zh: "\u4EF7\u683C\u533A\u95F4", en: "Price range", hintZh: "\u70B9\u51FB\u4E24\u70B9\uFF0C\u6D4B\u91CF\u4EF7\u683C\u5DEE\u4E0E\u767E\u5206\u6BD4", hintEn: "Click two points to measure price change", icon: "M12 3v18M8 7l4-4 4 4M8 17l4 4 4-4M5 3h14M5 21h14" },
   { group: "measure", kind: "daterange", zh: "\u65E5\u671F\u533A\u95F4", en: "Date range", hintZh: "\u70B9\u51FB\u4E24\u70B9\uFF0C\u6D4B\u91CF K \u7EBF\u6839\u6570\u4E0E\u65F6\u957F", hintEn: "Click two points to measure bars and time", icon: "M3 12h18M7 8l-4 4 4 4M17 8l4 4-4 4M3 5v14M21 5v14" },
   { group: "measure", kind: "measure", zh: "\u65E5\u671F\u4E0E\u4EF7\u683C\u533A\u95F4", en: "Date & price range", hintZh: "\u70B9\u51FB\u8D77\u70B9\u548C\u7EC8\u70B9\uFF0C\u663E\u793A\u6DA8\u8DCC\u3001\u6839\u6570\u4E0E\u65F6\u957F", hintEn: "Click two points to measure change, bars and time", icon: "M12 3v18M8 7l4-4 4 4M8 17l4 4 4-4" },
+  { group: "measure", kind: "forecast", zh: "\u9884\u6D4B", en: "Forecast", hintZh: "\u70B9\u51FB\u8D77\u70B9\uFF0C\u518D\u70B9\u51FB\u9884\u6D4B\u76EE\u6807\uFF0C\u663E\u793A\u6DA8\u8DCC\u4E0E\u65F6\u957F", hintEn: "Click the source, then the target; shows change and time", icon: "M3 17 10 12M10 12l11-7M17 5h4v4M10 12v.01" },
+  { group: "measure", kind: "avwap", zh: "\u951A\u5B9A VWAP", en: "Anchored VWAP", hintZh: "\u5355\u51FB\u951A\u5B9A\u7684 K \u7EBF\uFF0C\u4ECE\u8BE5\u5904\u7D2F\u8BA1\u5230\u6700\u65B0 K \u7EBF", hintEn: "Click the anchor bar; accumulates to the latest bar", icon: "M4 4v16M4 16c4-1 6-6 10-7s5 2 6 0" },
+  { group: "measure", kind: "avprofile", zh: "\u951A\u5B9A\u6210\u4EA4\u91CF\u5206\u5E03", en: "Anchored volume profile", hintZh: "\u5355\u51FB\u951A\u5B9A\u7684 K \u7EBF\uFF0C\u7EDF\u8BA1\u4ECE\u8BE5\u5904\u5230\u6700\u65B0\u7684\u6210\u4EA4\u91CF\u5206\u5E03", hintEn: "Click the anchor bar; volume by price up to the latest bar", icon: "M4 3v18M4 6h7M4 10h12M4 14h9M4 18h5" },
+  { group: "measure", kind: "barspattern", zh: "K \u7EBF\u5F62\u6001", en: "Bars pattern", hintZh: "\u70B9\u51FB\u6E90\u533A\u95F4\u8D77\u70B9\u548C\u7EC8\u70B9\uFF0C\u518D\u70B9\u51FB\u7C98\u8D34\u4F4D\u7F6E\uFF0C\u590D\u5236\u8FD9\u6BB5 K \u7EBF\u7684\u5F62\u72B6", hintEn: "Click the source range start and end, then where to paste its shape", icon: "M6 5v14M4 8h2M6 15h2M12 3v12M10 6h2M12 12h2M18 8v12M16 10h2M18 17h2" },
   { group: "measure", kind: "long", zh: "\u591A\u5934\u5934\u5BF8", en: "Long position", hintZh: "\u70B9\u51FB\u5165\u573A\u4EF7\uFF0C\u518D\u70B9\u51FB\u6B62\u635F\u4EF7\uFF08\u6B62\u76C8\u9ED8\u8BA4 2R\uFF0C\u53EF\u62D6\u52A8\uFF09", hintEn: "Click entry, then stop (target defaults to 2R)", icon: "M4 4h16v8H4zM4 12h16v8H4zM4 12h16" },
   { group: "measure", kind: "short", zh: "\u7A7A\u5934\u5934\u5BF8", en: "Short position", hintZh: "\u70B9\u51FB\u5165\u573A\u4EF7\uFF0C\u518D\u70B9\u51FB\u6B62\u635F\u4EF7\uFF08\u6B62\u76C8\u9ED8\u8BA4 2R\uFF0C\u53EF\u62D6\u52A8\uFF09", hintEn: "Click entry, then stop (target defaults to 2R)", icon: "M4 4h16v8H4zM4 12h16v8H4zM4 12h16" }
 ];
@@ -17872,6 +17965,7 @@ var ICONS = {
 };
 var ICON_LIST = ICON_NAMES;
 var clicksNeeded = (kind) => DRAWING_CLICKS[kind];
+var isMultiKind = (kind) => MULTI_KINDS.includes(kind);
 function ToolIcon({ kind, size: size3 = 16 }) {
   return /* @__PURE__ */ React7.createElement("svg", { viewBox: "0 0 24 24", width: size3, height: size3, fill: "none", stroke: "currentColor", strokeWidth: "1.7", strokeLinecap: "round", strokeLinejoin: "round", "aria-hidden": "true" }, /* @__PURE__ */ React7.createElement("path", { d: toolOf(kind).icon }));
 }
@@ -18118,12 +18212,63 @@ var DrawingShape = React7.memo(function DrawingShape2({ kind, points: points2, l
       body = p.length === 2 ? /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y }) : p.length >= 3 ? /* @__PURE__ */ React7.createElement("polygon", { className: "dhl-drawing-fill", points: p.slice(0, 3).map((point) => `${point.x},${point.y}`).join(" ") }) : null;
       break;
     }
-    case "brush": {
+    case "brush":
+    case "highlighter": {
       if (p.length < 2) break;
-      body = /* @__PURE__ */ React7.createElement("polyline", { className: "dhl-brush", points: p.map((point) => `${point.x},${point.y}`).join(" ") });
+      body = /* @__PURE__ */ React7.createElement("polyline", { className: kind === "brush" ? "dhl-brush" : "dhl-brush dhl-highlighter", points: p.map((point) => `${point.x},${point.y}`).join(" ") });
       handles = [];
       break;
     }
+    case "path":
+    case "polyline": {
+      if (p.length < 2) break;
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("polyline", { className: "dhl-pattern", points: p.map((point) => `${point.x},${point.y}`).join(" ") }), kind === "path" ? /* @__PURE__ */ React7.createElement("polygon", { className: "dhl-arrow-head", points: arrowHead(p[p.length - 2], p[p.length - 1]) }) : null);
+      break;
+    }
+    case "pin": {
+      const value = textValue || label || tr("\u56FE\u9489", "Pin");
+      const lines = wrapText(value, 220);
+      const width = (16 + Math.max(...lines.map(textWidth))) * k, height = (10 + lines.length * 16) * k;
+      const top = p[0].y - 30 - height;
+      body = /* @__PURE__ */ React7.createElement("g", { className: "dhl-pin" }, /* @__PURE__ */ React7.createElement("path", { className: "dhl-pin-glyph", transform: `translate(${p[0].x - 9} ${p[0].y - 22}) scale(0.75)`, d: "M12 21s-6-5.6-6-10a6 6 0 0 1 12 0c0 4.4-6 10-6 10zM12 8.5a2.5 2.5 0 1 0 0 5 2.5 2.5 0 0 0 0-5z" }), /* @__PURE__ */ React7.createElement("rect", { className: "dhl-text-box dhl-note-box", x: p[0].x - width / 2, y: top, width, height, rx: "4" }), lines.map((line, index) => /* @__PURE__ */ React7.createElement(React7.Fragment, { key: index }, text(p[0].x - width / 2 + 8 * k, top + (17 + index * 16) * k - 2, line, "start", "dhl-drawing-text dhl-text-value"))));
+      handles = [p[0]];
+      break;
+    }
+    case "fibspiral": {
+      if (!p[1]) break;
+      const r0 = Math.hypot(p[1].x - p[0].x, p[1].y - p[0].y), a0 = Math.atan2(p[1].y - p[0].y, p[1].x - p[0].x);
+      if (r0 < 1) break;
+      const pts = [];
+      for (let theta = -4 * Math.PI; theta <= 3 * Math.PI; theta += Math.PI / 32) {
+        const r = r0 * Math.pow(1.618034, theta / (Math.PI / 2));
+        if (r > 4 * Math.hypot(w, h)) break;
+        pts.push(`${(p[0].x + r * Math.cos(a0 + theta)).toFixed(1)},${(p[0].y + r * Math.sin(a0 + theta)).toFixed(1)}`);
+      }
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("polyline", { className: "dhl-pattern", points: pts.join(" ") }), /* @__PURE__ */ React7.createElement("line", { className: "dhl-drawing-mid", x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y }));
+      break;
+    }
+    case "barspattern": {
+      if (!p[1]) break;
+      const [from, to] = points2[0].time <= points2[1].time ? [points2[0], points2[1]] : [points2[1], points2[0]];
+      const source = view.candles?.(from.time, to.time) ?? [];
+      if (!p[2]) {
+        body = /* @__PURE__ */ React7.createElement("rect", { className: "dhl-drawing-mid", x: Math.min(p[0].x, p[1].x), y: 0, width: Math.abs(p[1].x - p[0].x), height: h, fill: "none" });
+        break;
+      }
+      if (!source.length) {
+        body = text(p[2].x, p[2].y, tr("\u6E90\u533A\u95F4\u6682\u65E0 K \u7EBF", "No bars in the source range"));
+        break;
+      }
+      const dt = points2[2].time - source[0].time, dp = points2[2].price - source[0].open;
+      let d = "";
+      for (const bar of source) {
+        const hi = view.project(bar.time + dt, bar.high + dp), lo = view.project(bar.time + dt, bar.low + dp), op = view.project(bar.time + dt, bar.open + dp), cl = view.project(bar.time + dt, bar.close + dp);
+        if (!hi || !lo || !op || !cl) continue;
+        d += `M${hi.x.toFixed(1)} ${hi.y.toFixed(1)}V${lo.y.toFixed(1)}M${(op.x - 3).toFixed(1)} ${op.y.toFixed(1)}H${op.x.toFixed(1)}M${cl.x.toFixed(1)} ${cl.y.toFixed(1)}H${(cl.x + 3).toFixed(1)}`;
+      }
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("rect", { className: "dhl-drawing-mid", x: Math.min(p[0].x, p[1].x), y: 0, width: Math.abs(p[1].x - p[0].x), height: h, fill: "none" }), /* @__PURE__ */ React7.createElement("path", { className: "dhl-bars-copy", d, "data-bars": source.length }));
+      break;
+    }
     case "callout": {
       if (!p[1]) break;
       const value = textValue || label || tr("\u6807\u6CE8", "Note");
@@ -18255,16 +18400,24 @@ var DrawingShape = React7.memo(function DrawingShape2({ kind, points: points2, l
       handles = [c0, c1];
       break;
     }
+    case "avprofile":
     case "vprofile": {
-      if (!p[1]) break;
-      const [from, to] = points2[0].time <= points2[1].time ? points2 : [points2[1], points2[0]];
-      const x0 = Math.min(p[0].x, p[1].x), x1 = Math.max(p[0].x, p[1].x);
+      const lastBar = kind === "avprofile" ? view.candles?.(points2[0].time, Number.MAX_SAFE_INTEGER).at(-1) : void 0;
+      const endPoint = kind === "avprofile" ? lastBar ? view.project(lastBar.time, points2[0].price) : null : p[1];
+      if (!endPoint) {
+        if (kind === "avprofile") {
+          body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, x2: p[0].x, y1: "0", y2: h }), text(p[0].x + 4, 16, tr("\u951A\u70B9\u4E4B\u540E\u6682\u65E0 K \u7EBF", "No bars after the anchor"), "start"));
+        }
+        break;
+      }
+      const [from, to] = kind === "avprofile" ? [points2[0], { time: lastBar.time, price: points2[0].price }] : points2[0].time <= points2[1].time ? points2 : [points2[1], points2[0]];
+      const x0 = Math.min(p[0].x, endPoint.x), x1 = Math.max(p[0].x, endPoint.x);
       const settings = { rows: rows ?? 48, valueArea: valueArea ?? 0.7 };
       const profile = view.profile ? view.profile(from.time, to.time, settings) : volumeProfile(view.candles?.(from.time, to.time) ?? [], settings);
       const partial = view.firstTime != null && view.barMs != null && view.firstTime - from.time >= view.barMs;
       if (!profile) {
         body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("rect", { className: "dhl-drawing-fill", x: x0, y: 0, width: Math.max(1, x1 - x0), height: h }), text(x0 + 4, 16, tr("\u533A\u95F4\u5185\u6682\u65E0\u6210\u4EA4\u91CF\u6570\u636E", "No volume in this range"), "start"));
-        handles = [p[0], p[1]];
+        handles = kind === "avprofile" ? [p[0]] : [p[0], p[1]];
         break;
       }
       const y = (price) => view.project(from.time, price)?.y;
@@ -18282,9 +18435,203 @@ var DrawingShape = React7.memo(function DrawingShape2({ kind, points: points2, l
         paths2[inValue ? "valueDown" : "outDown"] += rectPath(x0 + upWidth, top, downWidth, height);
       });
       body = /* @__PURE__ */ React7.createElement("g", { className: "dhl-vprofile", "data-rows": profile.rows.length }, yTop != null && yBottom != null ? /* @__PURE__ */ React7.createElement("rect", { className: "dhl-vprofile-range", x: x0, y: yTop, width: Math.max(1, x1 - x0), height: Math.max(1, yBottom - yTop) }) : null, /* @__PURE__ */ React7.createElement("g", { className: "dhl-vprofile-va" }, /* @__PURE__ */ React7.createElement("path", { className: "dhl-vprofile-up", d: paths2.valueUp }), /* @__PURE__ */ React7.createElement("path", { className: "dhl-vprofile-down", d: paths2.valueDown })), /* @__PURE__ */ React7.createElement("g", { className: "dhl-vprofile-out" }, /* @__PURE__ */ React7.createElement("path", { className: "dhl-vprofile-up", d: paths2.outUp }), /* @__PURE__ */ React7.createElement("path", { className: "dhl-vprofile-down", d: paths2.outDown })), yPoc != null ? /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("line", { className: "dhl-vprofile-poc", x1: x0, y1: yPoc, x2: x1, y2: yPoc }), text(x1 - 4, yPoc - 4, `POC ${fmtPrice(profile.poc)}`, "end")) : null, yVah != null ? /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("line", { className: "dhl-drawing-mid", x1: x0, y1: yVah, x2: x1, y2: yVah }), text(x1 - 4, yVah - 4, `VAH ${fmtPrice(profile.vah)}`, "end")) : null, yVal != null ? /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("line", { className: "dhl-drawing-mid", x1: x0, y1: yVal, x2: x1, y2: yVal }), text(x1 - 4, yVal + 12, `VAL ${fmtPrice(profile.val)}`, "end")) : null, yBottom != null ? text(x0 + 4, Math.min(h - 4, yBottom + 14), partial ? tr("K \u7EBF\u4F30\u7B97 \xB7 \u533A\u95F4\u524D\u6BB5\u5386\u53F2\u672A\u52A0\u8F7D", "Estimated from bars \xB7 early range not loaded") : tr("K \u7EBF\u4F30\u7B97", "Estimated from bars"), "start", partial ? "dhl-drawing-text dhl-vprofile-warn" : "dhl-drawing-text") : null);
+      handles = kind === "avprofile" ? [p[0]] : [p[0], p[1]];
+      break;
+    }
+    case "avwap": {
+      const bars = view.candles?.(points2[0].time, Number.MAX_SAFE_INTEGER) ?? [];
+      let pv = 0, vol = 0;
+      const path = [];
+      for (const bar of bars) {
+        pv += (bar.high + bar.low + bar.close) / 3 * bar.volume;
+        vol += bar.volume;
+        const point = vol > 0 ? view.project(bar.time, pv / vol) : null;
+        if (point) path.push(point);
+      }
+      if (path.length < 1 || vol <= 0) {
+        body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, x2: p[0].x, y1: "0", y2: h }), text(p[0].x + 4, 16, tr("\u951A\u70B9\u4E4B\u540E\u6682\u65E0\u6210\u4EA4\u91CF", "No volume after the anchor"), "start"));
+        break;
+      }
+      const last = path.at(-1);
+      const partial = view.firstTime != null && view.barMs != null && view.firstTime - points2[0].time >= view.barMs;
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("polyline", { className: "dhl-pattern", points: path.map((point) => `${point.x},${point.y}`).join(" ") }), /* @__PURE__ */ React7.createElement("line", { className: "dhl-drawing-mid", x1: p[0].x, x2: p[0].x, y1: p[0].y - 14, y2: p[0].y + 14 }), text(Math.min(last.x + 4, w - 110), last.y - 5, `VWAP ${fmtPrice(pv / vol)}`), partial ? text(Math.min(last.x + 4, w - 160), last.y + 12, tr("\u951A\u70B9\u524D\u6BB5\u5386\u53F2\u672A\u52A0\u8F7D\uFF0C\u6570\u503C\u6682\u4E0D\u5B8C\u6574", "Early history not loaded; value incomplete"), "start", "dhl-drawing-text dhl-vprofile-warn") : null);
+      handles = [p[0]];
+      break;
+    }
+    case "forecast": {
+      if (!p[1]) break;
+      const [a, b] = points2;
+      const change = b.price - a.price, pct = a.price > 0 ? change / a.price * 100 : 0;
+      const up = change >= 0;
+      const boxY = up ? p[1].y - 44 : p[1].y + 8;
+      body = /* @__PURE__ */ React7.createElement("g", { className: `dhl-measure ${up ? "up" : "down"}` }, /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y }), /* @__PURE__ */ React7.createElement("polygon", { className: "dhl-arrow-head", points: arrowHead(p[0], p[1]) }), /* @__PURE__ */ React7.createElement("line", { className: "dhl-drawing-mid", x1: p[0].x, x2: p[1].x, y1: p[0].y, y2: p[0].y }), /* @__PURE__ */ React7.createElement("rect", { className: "dhl-measure-box", x: p[1].x - 78, y: boxY, width: "156", height: "36", rx: "4" }), text(p[1].x, boxY + 15, `${tr("\u76EE\u6807", "Target")} ${fmtPrice(b.price)} (${up ? "+" : ""}${pct.toFixed(2)}%)`, "middle"), text(p[1].x, boxY + 29, `${Math.abs(Math.round(view.bars(a.time, b.time)))} ${tr("\u6839", "bars")} \xB7 ${duration(b.time - a.time)}`, "middle"));
+      break;
+    }
+    case "note":
+    case "signpost": {
+      const value = textValue || label || (kind === "note" ? tr("\u4FBF\u7B7E", "Note") : tr("\u8DEF\u6807", "Signpost"));
+      const lines = wrapText(value, 220);
+      const width = (16 + Math.max(...lines.map(textWidth))) * k, height = (10 + lines.length * 16) * k;
+      const top = kind === "note" ? p[0].y - height / 2 : p[0].y - 46 - height;
+      const left = kind === "note" ? p[0].x + 12 : p[0].x - 4;
+      body = /* @__PURE__ */ React7.createElement("g", { className: kind === "note" ? "dhl-note" : "dhl-signpost" }, kind === "signpost" ? /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, x2: p[0].x, y1: p[0].y, y2: top + height }) : /* @__PURE__ */ React7.createElement("line", { className: "dhl-drawing-mid", x1: p[0].x, y1: p[0].y, x2: left, y2: p[0].y }), /* @__PURE__ */ React7.createElement("circle", { className: "dhl-callout-dot", cx: p[0].x, cy: p[0].y, r: "3" }), /* @__PURE__ */ React7.createElement("rect", { className: "dhl-text-box dhl-note-box", x: left, y: top, width, height, rx: "4" }), lines.map((line, index) => /* @__PURE__ */ React7.createElement(React7.Fragment, { key: index }, text(left + 8 * k, top + (17 + index * 16) * k - 2, line, "start", "dhl-drawing-text dhl-text-value"))));
+      handles = [p[0]];
+      break;
+    }
+    case "pricenote": {
+      if (!p[1]) break;
+      const value = `${fmtPrice(points2[0].price)} \xB7 ${textValue || label || tr("\u4EF7\u683C\u4FBF\u7B7E", "Price note")}`;
+      const width = Math.min(300, 16 + textWidth(value)) * k;
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y + 13 * k }), /* @__PURE__ */ React7.createElement("circle", { className: "dhl-callout-dot", cx: p[0].x, cy: p[0].y, r: "3" }), /* @__PURE__ */ React7.createElement("rect", { className: "dhl-text-box dhl-note-box", x: p[1].x, y: p[1].y, width, height: 26 * k, rx: "4" }), text(p[1].x + 8 * k, p[1].y + 17 * k, value, "start", "dhl-drawing-text dhl-text-value"));
+      break;
+    }
+    case "flatchannel":
+    case "disjoint": {
+      if (!p[1]) break;
+      const base = /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y });
+      if (!p[2]) {
+        body = base;
+        break;
+      }
+      const a2 = kind === "flatchannel" ? { x: p[0].x, y: p[2].y } : p[2];
+      const b2 = kind === "flatchannel" ? { x: p[1].x, y: p[2].y } : { x: p[2].x + (p[1].x - p[0].x), y: p[2].y - (p[1].y - p[0].y) };
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("polygon", { className: "dhl-drawing-fill", points: `${p[0].x},${p[0].y} ${p[1].x},${p[1].y} ${b2.x},${b2.y} ${a2.x},${a2.y}` }), base, /* @__PURE__ */ React7.createElement("line", { x1: a2.x, y1: a2.y, x2: b2.x, y2: b2.y }));
+      break;
+    }
+    case "fibfan": {
+      if (!p[1]) break;
+      const dx = p[1].x - p[0].x, dy = p[1].y - p[0].y;
+      const ratios = [0.25, 0.382, 0.5, 0.618, 0.75];
+      const ray = (end, key3, value) => {
+        const seg = clipLine(p[0], end, w, h, 0);
+        return seg ? /* @__PURE__ */ React7.createElement("g", { key: key3 }, /* @__PURE__ */ React7.createElement("line", { x1: seg[0].x, y1: seg[0].y, x2: seg[1].x, y2: seg[1].y }), text(end.x + 3, end.y - 3, value)) : null;
+      };
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("rect", { className: "dhl-drawing-mid", x: Math.min(p[0].x, p[1].x), y: Math.min(p[0].y, p[1].y), width: Math.abs(dx), height: Math.abs(dy), fill: "none" }), ratios.map((r) => ray({ x: p[1].x, y: p[0].y + dy * r }, `p${r}`, String(r))), ratios.map((r) => ray({ x: p[0].x + dx * r, y: p[1].y }, `t${r}`, String(r))), ray(p[1], "one", "1"));
+      break;
+    }
+    case "fibcircles":
+    case "fibarcs": {
+      if (!p[1]) break;
+      const center = kind === "fibcircles" ? p[0] : p[1];
+      const radius2 = Math.hypot(p[1].x - p[0].x, p[1].y - p[0].y);
+      const levels2 = kind === "fibcircles" ? [0.382, 0.5, 0.618, 1, 1.618, 2.618] : [0.382, 0.5, 0.618, 1];
+      const sweep = p[0].y > p[1].y ? 1 : 0;
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, levels2.map((level) => {
+        const r = radius2 * level;
+        return /* @__PURE__ */ React7.createElement("g", { key: level }, kind === "fibcircles" ? /* @__PURE__ */ React7.createElement("circle", { className: "dhl-fib-ring", cx: center.x, cy: center.y, r }) : /* @__PURE__ */ React7.createElement("path", { className: "dhl-fib-ring", d: `M${center.x - r} ${center.y}A${r} ${r} 0 0 ${sweep} ${center.x + r} ${center.y}` }), text(center.x + 3, center.y + (sweep ? -r : r) + (sweep ? 12 : -4), String(level)));
+      }), /* @__PURE__ */ React7.createElement("line", { className: "dhl-drawing-mid", x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y }));
+      break;
+    }
+    case "fibwedge": {
+      if (!p[1]) break;
+      if (!p[2]) {
+        body = /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y });
+        break;
+      }
+      const radius2 = Math.hypot(p[1].x - p[0].x, p[1].y - p[0].y);
+      const a1 = Math.atan2(p[1].y - p[0].y, p[1].x - p[0].x), a2 = Math.atan2(p[2].y - p[0].y, p[2].x - p[0].x);
+      const span = Math.atan2(Math.sin(a2 - a1), Math.cos(a2 - a1));
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[0].x + Math.cos(a1) * radius2, y2: p[0].y + Math.sin(a1) * radius2 }), /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[0].x + Math.cos(a2) * radius2, y2: p[0].y + Math.sin(a2) * radius2 }), [0.236, 0.382, 0.5, 0.618, 0.786, 1].map((level) => {
+        const r = radius2 * level;
+        const s = { x: p[0].x + Math.cos(a1) * r, y: p[0].y + Math.sin(a1) * r }, e = { x: p[0].x + Math.cos(a1 + span) * r, y: p[0].y + Math.sin(a1 + span) * r };
+        return /* @__PURE__ */ React7.createElement("g", { key: level }, /* @__PURE__ */ React7.createElement("path", { className: "dhl-fib-ring", d: `M${s.x} ${s.y}A${r} ${r} 0 0 ${span > 0 ? 1 : 0} ${e.x} ${e.y}` }), text(s.x + 3, s.y - 3, String(level)));
+      }));
+      break;
+    }
+    case "fibtrendtime": {
+      if (!p[1]) break;
+      if (!p[2]) {
+        body = /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y });
+        break;
+      }
+      const unit = points2[1].time - points2[0].time;
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("line", { className: "dhl-drawing-mid", x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y }), [0, 0.382, 0.5, 0.618, 1, 1.382, 1.618, 2, 2.618].map((level) => {
+        const x = view.project(points2[2].time + unit * level, points2[2].price)?.x;
+        return x == null || x < -2 || x > w + 2 ? null : /* @__PURE__ */ React7.createElement("g", { key: level }, /* @__PURE__ */ React7.createElement("line", { className: level === 0 || level === 1 ? "dhl-fib-key" : void 0, x1: x, x2: x, y1: "0", y2: h }), text(x + 3, 12, String(level)));
+      }));
+      break;
+    }
+    case "cypher": {
+      const [X, A, B, C, D] = points2;
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, p[2] ? /* @__PURE__ */ React7.createElement("polygon", { className: "dhl-drawing-fill", points: `${p[0].x},${p[0].y} ${p[1].x},${p[1].y} ${p[2].x},${p[2].y}` }) : null, p[4] ? /* @__PURE__ */ React7.createElement("polygon", { className: "dhl-drawing-fill", points: `${p[2].x},${p[2].y} ${p[3].x},${p[3].y} ${p[4].x},${p[4].y}` }) : null, wave(p, ["X", "A", "B", "C", "D"], text), p[2] ? guide(p[0], p[2], ratio(B.price - A.price, A.price - X.price), "xb", text) : null, p[3] ? guide(p[1], p[3], ratio(C.price - X.price, A.price - X.price), "xc", text) : null, p[4] ? guide(p[0], p[4], ratio(C.price - D.price, C.price - X.price), "xd", text) : null);
+      break;
+    }
+    case "threedrives": {
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, wave(p, ["", "1", "A", "2", "B", "3"], text), p[2] ? guide(p[0], p[2], ratio(points2[2].price - points2[1].price, points2[1].price - points2[0].price), "a", text) : null, p[3] ? guide(p[1], p[3], ratio(points2[3].price - points2[2].price, points2[1].price - points2[2].price), "d2", text) : null, p[4] ? guide(p[2], p[4], ratio(points2[4].price - points2[3].price, points2[3].price - points2[2].price), "b", text) : null, p[5] ? guide(p[3], p[5], ratio(points2[5].price - points2[4].price, points2[3].price - points2[4].price), "d3", text) : null);
+      break;
+    }
+    case "tripattern": {
+      const upper = p[2] ? clipLine(p[0], p[2], w, h, 0) : null, lower = p[3] ? clipLine(p[1], p[3], w, h, 0) : null;
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, wave(p, ["A", "B", "C", "D"], text), upper ? /* @__PURE__ */ React7.createElement("line", { className: "dhl-neckline", x1: upper[0].x, y1: upper[0].y, x2: upper[1].x, y2: upper[1].y }) : null, lower ? /* @__PURE__ */ React7.createElement("line", { className: "dhl-neckline", x1: lower[0].x, y1: lower[0].y, x2: lower[1].x, y2: lower[1].y }) : null);
+      break;
+    }
+    case "elliotttri":
+      body = wave(p, ["0", "(A)", "(B)", "(C)", "(D)", "(E)"], text);
+      break;
+    case "elliottwxy":
+      body = wave(p, ["0", "(W)", "(X)", "(Y)"], text);
+      break;
+    case "elliottwxyxz":
+      body = wave(p, ["0", "(W)", "(X)", "(Y)", "(X)", "(Z)"], text);
+      break;
+    case "cycles": {
+      if (!p[1]) break;
+      const step = points2[1].time - points2[0].time;
+      const xs = [];
+      const spacing = (view.project(points2[0].time + step, points2[0].price)?.x ?? NaN) - p[0].x;
+      const first = Number.isFinite(spacing) && spacing > 0 ? Math.max(0, Math.floor(-p[0].x / spacing) - 1) : 0;
+      for (let n2 = first; n2 < first + 400; n2 += 1) {
+        const x = view.project(points2[0].time + step * n2, points2[0].price)?.x;
+        if (x == null || x > w + 2) break;
+        if (x >= -2) xs.push(x);
+      }
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, xs.map((x, index) => /* @__PURE__ */ React7.createElement("line", { key: index, className: index === 0 ? "dhl-fib-key" : void 0, x1: x, x2: x, y1: "0", y2: h })));
       handles = [p[0], p[1]];
       break;
     }
+    case "sine": {
+      if (!p[1]) break;
+      const half = p[1].x - p[0].x;
+      if (Math.abs(half) < 2) {
+        body = /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y });
+        break;
+      }
+      const mid = (p[0].y + p[1].y) / 2, amp = (p[0].y - p[1].y) / 2;
+      const step = Math.max(2, Math.abs(half) / 16);
+      const pts = [];
+      for (let x = 0; x <= w; x += step) pts.push(`${x.toFixed(1)},${(mid + amp * Math.cos(Math.PI * (x - p[0].x) / half)).toFixed(1)}`);
+      body = /* @__PURE__ */ React7.createElement("polyline", { className: "dhl-pattern", points: pts.join(" ") });
+      break;
+    }
+    case "ellipse": {
+      if (!p[1]) break;
+      body = /* @__PURE__ */ React7.createElement("ellipse", { className: "dhl-drawing-fill", cx: (p[0].x + p[1].x) / 2, cy: (p[0].y + p[1].y) / 2, rx: Math.abs(p[1].x - p[0].x) / 2, ry: Math.abs(p[1].y - p[0].y) / 2 });
+      break;
+    }
+    case "rotrect": {
+      if (!p[1]) break;
+      if (!p[2]) {
+        body = /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y });
+        break;
+      }
+      const ux = p[1].x - p[0].x, uy = p[1].y - p[0].y, len = Math.hypot(ux, uy) || 1;
+      const nx = -uy / len, ny = ux / len;
+      const d = (p[2].x - p[0].x) * nx + (p[2].y - p[0].y) * ny;
+      const c = { x: p[1].x + nx * d, y: p[1].y + ny * d }, e = { x: p[0].x + nx * d, y: p[0].y + ny * d };
+      body = /* @__PURE__ */ React7.createElement("polygon", { className: "dhl-drawing-fill", points: `${p[0].x},${p[0].y} ${p[1].x},${p[1].y} ${c.x},${c.y} ${e.x},${e.y}` });
+      break;
+    }
+    case "arc":
+    case "curve": {
+      if (!p[1]) break;
+      if (!p[2]) {
+        body = /* @__PURE__ */ React7.createElement("line", { x1: p[0].x, y1: p[0].y, x2: p[1].x, y2: p[1].y });
+        break;
+      }
+      const control = kind === "arc" ? { x: 2 * p[2].x - (p[0].x + p[1].x) / 2, y: 2 * p[2].y - (p[0].y + p[1].y) / 2 } : p[2];
+      body = /* @__PURE__ */ React7.createElement(React7.Fragment, null, /* @__PURE__ */ React7.createElement("path", { className: "dhl-curve", d: `M${p[0].x} ${p[0].y}Q${control.x} ${control.y} ${p[1].x} ${p[1].y}` }), kind === "curve" && anchors ? /* @__PURE__ */ React7.createElement("polyline", { className: "dhl-drawing-mid", points: `${p[0].x},${p[0].y} ${p[2].x},${p[2].y} ${p[1].x},${p[1].y}` }) : null);
+      break;
+    }
     case "text": {
       const value = textValue || label || tr("\u6587\u672C", "Text");
       const lines = wrapText(value, 300);
@@ -18360,7 +18707,7 @@ function saveStyleTemplate(kind, style) {
 // src/client/components/draw-toolbar.tsx
 var DRAW_COLORS = ["#4c82d8", "#2fd3a0", "#ef5f6c", "#e2a943", "#9b86db", "#26b5c8", "#8a8f98"];
 var STYLES = [["solid", "\u5B9E\u7EBF", "Solid"], ["dashed", "\u865A\u7EBF", "Dashed"], ["dotted", "\u70B9\u7EBF", "Dotted"]];
-function DrawToolbar({ mark, globallyLocked, onEdit, onRemove, onClose, onClone, onCoordinates }) {
+function DrawToolbar({ mark, globallyLocked, onEdit, onRemove, onClose, onClone, onCoordinates, placement = "top" }) {
   const [savedDefault, setSavedDefault] = React8.useState(false);
   React8.useEffect(() => {
     setSavedDefault(false);
@@ -18391,7 +18738,7 @@ function DrawToolbar({ mark, globallyLocked, onEdit, onRemove, onClose, onClone,
   const style = mark.lineStyle ?? "solid";
   const tool = toolOf(mark.kind);
   const stop = (event) => event.stopPropagation();
-  return /* @__PURE__ */ React8.createElement("div", { className: "dhl-draw-toolbar", role: "toolbar", "aria-label": tr("\u753B\u7EBF\u6837\u5F0F", "Drawing style"), onPointerDown: stop, onClick: stop }, /* @__PURE__ */ React8.createElement("span", { className: "dhl-draw-toolbar-name" }, tr(tool.zh, tool.en)), isTextKind(mark.kind) ? /* @__PURE__ */ React8.createElement(
+  return /* @__PURE__ */ React8.createElement("div", { className: "dhl-draw-toolbar" + (placement === "bottom" ? " at-bottom" : ""), role: "toolbar", "aria-label": tr("\u753B\u7EBF\u6837\u5F0F", "Drawing style"), onPointerDown: stop, onClick: stop }, /* @__PURE__ */ React8.createElement("span", { className: "dhl-draw-toolbar-name" }, tr(tool.zh, tool.en)), isTextKind(mark.kind) ? /* @__PURE__ */ React8.createElement(
     "input",
     {
       className: "dhl-draw-toolbar-text",
@@ -18728,7 +19075,23 @@ function cssVar(el, name, fallback) {
 function chartData(points2) {
   return points2.map((point) => ({ time: point.time, value: point.value }));
 }
+var TOOLBAR_CLEARANCE = 84;
 var FINITE_KINDS = /* @__PURE__ */ new Set([
+  "highlighter",
+  "path",
+  "polyline",
+  "pin",
+  "ellipse",
+  "curve",
+  "note",
+  "pricenote",
+  "signpost",
+  "forecast",
+  "cypher",
+  "threedrives",
+  "elliotttri",
+  "elliottwxy",
+  "elliottwxyxz",
   "trend",
   "rect",
   "measure",
@@ -19022,6 +19385,7 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
     box.addEventListener("pointerup", move, true);
     box.addEventListener("pointercancel", cancel, true);
     let touchTapAt = -Infinity;
+    let lastMultiClick = null, multiFinishedAt = null;
     const fromTouch = (event) => event.pointerType === "touch" || Boolean(event.sourceCapabilities?.firesTouchEvents);
     const chartClick = (event) => {
       if (event.type === "click" && fromTouch(event) && performance.now() - touchTapAt < 800) return false;
@@ -19044,6 +19408,25 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
           onDrawRef.current({ kind: "level", price: point.price });
           return;
         }
+        if (isMultiKind(mode)) {
+          const now = performance.now(), here = { x: event.clientX, y: event.clientY };
+          const near = (other, within = Infinity) => Boolean(other && now - other.at < within && Math.hypot(here.x - other.x, here.y - other.y) <= 6);
+          if (near(multiFinishedAt, 500)) {
+            multiFinishedAt = null;
+            return;
+          }
+          if (pending.current.length && near(lastMultiClick)) {
+            multiFinishedAt = { ...here, at: now };
+            lastMultiClick = null;
+            finishMultiRef.current();
+            return;
+          }
+          lastMultiClick = { ...here, at: now };
+          pending.current = [...pending.current, point];
+          setPendingPoints(pending.current);
+          if (pending.current.length >= PATH_MAX) finishMultiRef.current();
+          return;
+        }
         const clicks = [...pending.current, point];
         if (clicks.length < clicksNeeded(mode)) {
           pending.current = clicks;
@@ -19494,6 +19877,26 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
     setPendingPoints([]);
     setDrawingHover(null);
   }, [drawMode]);
+  const finishMulti = () => {
+    const mode = drawModeRef.current;
+    const points2 = pending.current;
+    pending.current = [];
+    setPendingPoints([]);
+    if (mode && isMultiKind(mode) && points2.length >= 2) onDrawRef.current({ kind: mode, points: points2 });
+  };
+  const finishMultiRef = React10.useRef(finishMulti);
+  finishMultiRef.current = finishMulti;
+  React10.useEffect(() => {
+    if (!drawMode || !isMultiKind(drawMode)) return void 0;
+    const onKey = (event) => {
+      const element = event.target;
+      if (event.key !== "Enter" || element?.isContentEditable || /^(INPUT|TEXTAREA|SELECT)$/.test(element?.tagName ?? "")) return;
+      event.preventDefault();
+      finishMultiRef.current();
+    };
+    window.addEventListener("keydown", onKey, true);
+    return () => window.removeEventListener("keydown", onKey, true);
+  }, [drawMode]);
   React10.useEffect(() => {
     if (resetToken > 0) refs.current?.chart.timeScale().fitContent();
   }, [resetToken]);
@@ -19521,6 +19924,12 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
     window.__dhlPriceLines = () => priceLines.current.size;
   }, [marks, themeVersion, chartType, interval]);
   const warming = candles.length < 2;
+  const toolbarPlacement = (mark) => {
+    if (!view) return "top";
+    const ys = markPoints(mark).map((point) => view.project(point.time, point.price)?.y).filter((y) => y != null);
+    const top = ys.filter((y) => y < TOOLBAR_CLEARANCE).length, bottom = ys.filter((y) => y > view.height - TOOLBAR_CLEARANCE).length;
+    return bottom < top ? "bottom" : "top";
+  };
   const markById = React10.useMemo(() => new Map(marks.map((mark) => [mark.id, mark])), [marks]);
   const markByIdRef = React10.useRef(markById);
   markByIdRef.current = markById;
@@ -19635,7 +20044,7 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
   const abortGesture = React10.useRef(null);
   React10.useEffect(() => () => abortGesture.current?.(), []);
   const [brushPoints, setBrushPoints] = React10.useState([]);
-  const beginBrush = (event) => {
+  const beginBrush = (event, freehandKind) => {
     const snap = snapRef.current;
     const first = snap?.(event.nativeEvent, void 0, false);
     if (!snap || !first) return;
@@ -19674,7 +20083,7 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
       if (collected.length < 2) return;
       const stride = Math.ceil(collected.length / BRUSH_MAX);
       const points2 = collected.filter((_, index) => index % stride === 0 || index === collected.length - 1).slice(-BRUSH_MAX);
-      onDrawRef.current({ kind: "brush", points: points2 });
+      onDrawRef.current({ kind: freehandKind, points: points2 });
     };
     abortGesture.current?.();
     abortGesture.current = cancel;
@@ -19733,8 +20142,8 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
     }
   }, [selectRequest, markById, timeline]);
   const beginDrag = React10.useCallback((event) => {
-    if (drawModeRef.current === "brush" && event.button === 0) {
-      beginBrush(event);
+    if (drawModeRef.current && FREEHAND_KINDS.includes(drawModeRef.current) && event.button === 0) {
+      beginBrush(event, drawModeRef.current);
       return;
     }
     if (drawModeRef.current || event.button !== 0) return;
@@ -19929,7 +20338,7 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
   const studyAt = (key3) => studies[key3].find((point) => point.time === inspectedTime)?.value;
   const inspectedStudies = studyDefinitions(settings).filter(([id]) => indicators.has(id)).map(([, key3, label]) => [label, studyAt(key3)]);
   const paneCount = ["rsi14", "macd", "atr14", "stochastic", "adx", "obv"].filter((id) => indicators.has(id)).length;
-  return /* @__PURE__ */ React10.createElement(React10.Fragment, null, /* @__PURE__ */ React10.createElement("div", { className: "dhl-chartbox", ref: boxRef, style: { height: expanded && !compact ? void 0 : (compact ? 310 : CHART_HEIGHT) + paneCount * (compact ? 65 : 125) } }, view ? /* @__PURE__ */ React10.createElement("svg", { className: "dhl-chart-drawing-overlay" + (drawMode ? " drawing" : "") + (drawMode === "brush" ? " brushing" : ""), "aria-hidden": "true", onPointerDown: beginDrag }, /* @__PURE__ */ React10.createElement("defs", null, /* @__PURE__ */ React10.createElement("clipPath", { id: clipId.current }, /* @__PURE__ */ React10.createElement("rect", { x: "0", y: "0", width: view.width, height: view.height })), /* @__PURE__ */ React10.createElement("marker", { id: `${clipId.current}-arrow`, viewBox: "0 0 10 10", refX: "8", refY: "5", markerWidth: "7", markerHeight: "7", orient: "auto-start-reverse" }, /* @__PURE__ */ React10.createElement("path", { d: "M0 0 10 5 0 10z", fill: "currentColor" }))), /* @__PURE__ */ React10.createElement("g", { clipPath: `url(#${clipId.current})` }, shapes.map(({ mark, points: points2 }) => {
+  return /* @__PURE__ */ React10.createElement(React10.Fragment, null, /* @__PURE__ */ React10.createElement("div", { className: "dhl-chartbox", ref: boxRef, style: { height: expanded && !compact ? void 0 : (compact ? 310 : CHART_HEIGHT) + paneCount * (compact ? 65 : 125) } }, view ? /* @__PURE__ */ React10.createElement("svg", { className: "dhl-chart-drawing-overlay" + (drawMode ? " drawing" : "") + (drawMode && FREEHAND_KINDS.includes(drawMode) ? " brushing" : ""), "aria-hidden": "true", onPointerDown: beginDrag }, /* @__PURE__ */ React10.createElement("defs", null, /* @__PURE__ */ React10.createElement("clipPath", { id: clipId.current }, /* @__PURE__ */ React10.createElement("rect", { x: "0", y: "0", width: view.width, height: view.height })), /* @__PURE__ */ React10.createElement("marker", { id: `${clipId.current}-arrow`, viewBox: "0 0 10 10", refX: "8", refY: "5", markerWidth: "7", markerHeight: "7", orient: "auto-start-reverse" }, /* @__PURE__ */ React10.createElement("path", { d: "M0 0 10 5 0 10z", fill: "currentColor" }))), /* @__PURE__ */ React10.createElement("g", { clipPath: `url(#${clipId.current})` }, shapes.map(({ mark, points: points2 }) => {
     const live = draft?.id === mark.id ? draft.points : groupDraft?.get(mark.id) ?? points2;
     const shown = mark.kind === "level" ? [{ time: lastTime, price: live[0].price }] : live;
     const selected = selectedId === mark.id || group.includes(mark.id);
@@ -19945,7 +20354,7 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
         points: shown,
         view,
         text: mark.label,
-        dataVersion: mark.kind === "vprofile" || mark.kind === "regression" ? candles : void 0,
+        dataVersion: mark.kind === "vprofile" || mark.kind === "regression" || mark.kind === "avwap" || mark.kind === "avprofile" || mark.kind === "barspattern" ? candles : void 0,
         className: `dhl-drawing ${roleClass(mark)}${mark.kind === "level" ? " is-level" : ""}${selected ? " selected" : ""}${mark.locked || drawingsLocked ? " locked" : ""}`,
         label: mark.source === "user" || mark.kind === "level" ? void 0 : mark.label,
         anchors: selected,
@@ -19971,10 +20380,10 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
     if (!point) return null;
     const short = event.reason.length > 18 ? event.reason.slice(0, 17) + "\u2026" : event.reason;
     return /* @__PURE__ */ React10.createElement("g", { key: event.id, className: `dhl-fill ${event.isBuy ? "buy" : "sell"}${event.reason ? " has-reason" : ""}${selectedFill === event.id ? " selected" : ""}`, "data-fill-id": event.id }, event.reason ? /* @__PURE__ */ React10.createElement("circle", { className: "dhl-fill-ring", cx: point.x, cy: point.y, r: "9" }) : null, /* @__PURE__ */ React10.createElement("circle", { className: "dhl-fill-dot", cx: point.x, cy: point.y, r: "5" }), showReasons && short ? /* @__PURE__ */ React10.createElement("text", { className: "dhl-fill-reason", x: point.x + 12, y: point.y + 4 }, short) : null);
-  })), brushPoints.length > 1 ? /* @__PURE__ */ React10.createElement(DrawingShape, { kind: "brush", points: brushPoints, view, className: "dhl-drawing dhl-drawing-preview role-user" }) : null, drawMode && drawingHover && hoverSnapped ? (() => {
+  })), brushPoints.length > 1 ? /* @__PURE__ */ React10.createElement(DrawingShape, { kind: drawMode === "highlighter" ? "highlighter" : "brush", points: brushPoints, view, className: "dhl-drawing dhl-drawing-preview role-user" }) : null, drawMode && drawingHover && hoverSnapped ? (() => {
     const at = view.project(drawingHover.time, drawingHover.price);
     return at ? /* @__PURE__ */ React10.createElement("circle", { className: "dhl-snap-ring", cx: at.x, cy: at.y, r: "6" }) : null;
-  })() : null, drawMode && drawMode !== "brush" && previewPoints.length ? /* @__PURE__ */ React10.createElement(DrawingShape, { kind: drawMode, points: completePreview(drawMode, previewPoints), view, className: "dhl-drawing dhl-drawing-preview role-user", anchors: true }) : null)) : null, fillCard && fillAt && view ? /* @__PURE__ */ React10.createElement(
+  })() : null, drawMode && !FREEHAND_KINDS.includes(drawMode) && previewPoints.length ? /* @__PURE__ */ React10.createElement(DrawingShape, { kind: drawMode, points: completePreview(drawMode, previewPoints), view, className: "dhl-drawing dhl-drawing-preview role-user", anchors: true }) : null)) : null, fillCard && fillAt && view ? /* @__PURE__ */ React10.createElement(
     "div",
     {
       className: "dhl-fill-card",
@@ -20006,6 +20415,7 @@ function CandleChart({ candles, marks, indicators, expanded, resetToken, drawMod
     {
       mark: selectedMark,
       globallyLocked: drawingsLocked,
+      placement: toolbarPlacement(selectedMark),
       onCoordinates: () => setEditingId(selectedMark.id),
       onEdit: (patch) => onEditMark(selectedMark.id, patch),
       onClone: () => onCloneMark(cloneOf(selectedMark)),
@@ -21379,6 +21789,7 @@ function DeskColumn({ onCollapse }) {
   const [textAt, setTextAt] = React26.useState(null);
   const [selectRequest, setSelectRequest] = React26.useState(null);
   const [textValue, setTextValue] = React26.useState("");
+  const [toolQuery, setToolQuery] = React26.useState("");
   const [confirmClear, setConfirmClear] = React26.useState(false);
   const [pickerOpen, setPickerOpen] = React26.useState(false);
   const [chartExpanded, setChartExpanded] = React26.useState(false);
@@ -21542,7 +21953,7 @@ function DeskColumn({ onCollapse }) {
   }, [indicators, s.candles, s.candlesOlder]);
   React26.useEffect(() => {
     if (s.candlesOlder !== "idle" || s.candles.length < 2) return;
-    const earliest = Math.min(...s.chartMarks.filter((mark2) => !mark2.hidden && (mark2.kind === "vprofile" || mark2.kind === "regression")).map((mark2) => Math.min(...(mark2.points ?? []).map((point) => point.time))));
+    const earliest = Math.min(...s.chartMarks.filter((mark2) => !mark2.hidden && ["vprofile", "regression", "avwap", "avprofile"].includes(mark2.kind)).map((mark2) => Math.min(...(mark2.points ?? []).map((point) => point.time))));
     if (Number.isFinite(earliest) && s.candles[0].t > earliest) void loadOlderCandles();
   }, [s.chartMarks, s.candles, s.candlesOlder]);
   React26.useEffect(() => {
@@ -21599,7 +22010,30 @@ function DeskColumn({ onCollapse }) {
         }
       }
     )
-  ), pickerOpen ? /* @__PURE__ */ React26.createElement(MarketPicker, { activeCoin: coin, onClose: () => setPickerOpen(false) }) : null, /* @__PURE__ */ React26.createElement("div", { className: "dhl-market-workspace" + (s.tapePlacement === "below" ? " dhl-tape-below" : "") }, /* @__PURE__ */ React26.createElement("section", { className: "dhl-chart-panel" + (chartExpanded ? " dhl-chart-panel-expanded" : ""), "aria-label": tr("\u884C\u60C5\u56FE\u8868", "Market chart") }, /* @__PURE__ */ React26.createElement("div", { className: "dhl-chart-tabs", role: "tablist", "aria-label": tr("\u56FE\u8868\u5185\u5BB9", "Chart content") }, /* @__PURE__ */ React26.createElement("button", { type: "button", role: "tab", "aria-selected": chartTab === "chart", className: chartTab === "chart" ? "on" : "", onClick: () => saveSessionWorkspace({ chartTab: "chart" }) }, tr("K \u7EBF", "Chart")), row?.kind !== "spot" && row?.kind !== "outcome" ? /* @__PURE__ */ React26.createElement("button", { type: "button", role: "tab", "aria-selected": chartTab === "funding", className: chartTab === "funding" ? "on" : "", onClick: () => saveSessionWorkspace({ chartTab: "funding" }) }, tr("\u8D44\u91D1\u8D39\u5386\u53F2", "Funding history")) : null), chartTab === "chart" ? /* @__PURE__ */ React26.createElement("div", { role: "tabpanel" }, /* @__PURE__ */ React26.createElement("div", { className: "dhl-chart-tools" }, /* @__PURE__ */ React26.createElement("div", { className: "dhl-intervals", "aria-label": tr("K \u7EBF\u5468\u671F", "Chart interval") }, INTERVALS.map((iv) => /* @__PURE__ */ React26.createElement("button", { key: iv, type: "button", className: s.interval === iv ? "on" : "", onClick: () => changeInterval(iv) }, iv)), /* @__PURE__ */ React26.createElement(Select, { "aria-label": tr("\u66F4\u591A K \u7EBF\u5468\u671F", "More chart intervals"), value: MORE_INTERVALS.includes(s.interval) ? s.interval : "", onChange: (event) => changeInterval(event.target.value) }, /* @__PURE__ */ React26.createElement("option", { value: "", disabled: true }, tr("\u66F4\u591A", "More")), MORE_INTERVALS.map((iv) => /* @__PURE__ */ React26.createElement("option", { key: iv, value: iv }, iv)))), /* @__PURE__ */ React26.createElement("div", { className: "dhl-chart-actions" }, /* @__PURE__ */ React26.createElement(Select, { "aria-label": tr("\u56FE\u8868\u7C7B\u578B", "Chart type"), value: chartType, onChange: (event) => saveSessionWorkspace({ chartType: event.target.value }) }, [["candles", "\u8721\u70DB\u56FE", "Candles"], ["bars", "\u7F8E\u56FD\u7EBF", "OHLC bars"], ["line", "\u6298\u7EBF\u56FE", "Line"], ["area", "\u9762\u79EF\u56FE", "Area"], ["heikinAshi", "\u5E73\u5747K\u7EBF", "Heikin Ashi"]].map(([value, zh, en]) => /* @__PURE__ */ React26.createElement("option", { key: value, value }, tr(zh, en)))), /* @__PURE__ */ React26.createElement("details", { className: "dhl-layer-menu" }, /* @__PURE__ */ React26.createElement("summary", null, tr("\u663E\u793A", "Show"), /* @__PURE__ */ React26.createElement(UiIcon, { name: "chevronDown", size: 12 })), /* @__PURE__ */ React26.createElement("div", { className: "dhl-layer-popover" }, [["orders", tr("\u59D4\u6258", "Orders")], ["fills", tr("\u6210\u4EA4", "Fills")], ["reasons", tr("\u6210\u4EA4\u539F\u56E0", "Fill reasons")], ["drawings", tr("\u753B\u7EBF", "Drawings")]].map(([id, label]) => /* @__PURE__ */ React26.createElement("label", { key: id }, /* @__PURE__ */ React26.createElement("input", { type: "checkbox", checked: layers[id], onChange: (event) => saveSessionWorkspace({ chartLayers: { ...layers, [id]: event.target.checked } }) }), label)))), /* @__PURE__ */ React26.createElement("details", { className: "dhl-indicator-menu" }, /* @__PURE__ */ React26.createElement("summary", { "aria-label": tr("\u9009\u62E9\u56FE\u8868\u6307\u6807", "Choose chart indicators") }, tr("\u6307\u6807", "Indicators"), " ", /* @__PURE__ */ React26.createElement("span", { className: "dhl-indicator-count" }, indicators.size + maLines.length)), /* @__PURE__ */ React26.createElement("div", { className: "dhl-indicator-popover", role: "group", "aria-label": tr("\u56FE\u8868\u6307\u6807", "Chart indicators") }, /* @__PURE__ */ React26.createElement("strong", null, tr("\u56FE\u8868\u6307\u6807", "Chart indicators")), INDICATOR_CHOICES.map(([id, label, description]) => /* @__PURE__ */ React26.createElement("button", { type: "button", key: id, className: indicators.has(id) ? "on" : "", "aria-pressed": indicators.has(id), onClick: () => toggleIndicator(id) }, /* @__PURE__ */ React26.createElement("span", { className: "dhl-indicator-check", "aria-hidden": "true" }, indicators.has(id) ? /* @__PURE__ */ React26.createElement(UiIcon, { name: "check", size: 13 }) : null), /* @__PURE__ */ React26.createElement("span", null, /* @__PURE__ */ React26.createElement("b", null, id === "rsi14" ? `RSI ${studySettings.rsi.period}` : id === "bollinger20" ? `BOLL ${studySettings.bollinger.period} \xD7 ${studySettings.bollinger.multiplier}` : tr(label, INDICATOR_EN[id]?.[0] ?? label)), /* @__PURE__ */ React26.createElement("small", null, id === "macd" ? `${studySettings.macd.fast} / ${studySettings.macd.slow} / ${studySettings.macd.signal}` : id === "bollinger20" ? tr("\u5747\u7EBF\u4E0E\u6807\u51C6\u5DEE\u901A\u9053", "Mean and standard deviation bands") : tr(description, INDICATOR_EN[id]?.[1] ?? description))))), /* @__PURE__ */ React26.createElement(IndicatorEditor, { key: s.activeSessionId, settings: s.workspace?.indicatorSettings, indicators: [...indicators], maLines, onApply: saveSessionWorkspace }), /* @__PURE__ */ React26.createElement(MaEditor, { lines: maLines, onChange: (next) => saveSessionWorkspace({ maLines: next }) }))), /* @__PURE__ */ React26.createElement("button", { type: "button", className: s.workspace?.showDataWindow ? "on" : "", "aria-pressed": s.workspace?.showDataWindow ?? false, onClick: () => saveSessionWorkspace({ showDataWindow: !s.workspace?.showDataWindow }) }, tr("\u6570\u636E\u7A97\u53E3", "Data window")), /* @__PURE__ */ React26.createElement(StrategyMenu, { candles: s.candles, coin, interval: s.interval }), /* @__PURE__ */ React26.createElement("details", { className: "dhl-draw-menu" + (drawMode ? " active" : ""), ref: drawMenu }, /* @__PURE__ */ React26.createElement("summary", { "aria-label": tr("\u753B\u7EBF\u5DE5\u5177", "Drawing tools") }, drawMode ? /* @__PURE__ */ React26.createElement(React26.Fragment, null, /* @__PURE__ */ React26.createElement(ToolIcon, { kind: drawMode, size: 14 }), tr(toolOf(drawMode).zh, toolOf(drawMode).en)) : tr("\u753B\u7EBF", "Draw"), /* @__PURE__ */ React26.createElement(UiIcon, { name: "chevronDown", size: 12 })), /* @__PURE__ */ React26.createElement("div", { className: "dhl-draw-popover", role: "menu", "aria-label": tr("\u753B\u7EBF\u5DE5\u5177", "Drawing tools") }, DRAWING_TOOLS.map((tool, index) => /* @__PURE__ */ React26.createElement(React26.Fragment, { key: tool.kind }, index > 0 && DRAWING_TOOLS[index - 1].group !== tool.group ? /* @__PURE__ */ React26.createElement("hr", null) : null, /* @__PURE__ */ React26.createElement("div", { className: "dhl-draw-tool-row" }, /* @__PURE__ */ React26.createElement(
+  ), pickerOpen ? /* @__PURE__ */ React26.createElement(MarketPicker, { activeCoin: coin, onClose: () => setPickerOpen(false) }) : null, /* @__PURE__ */ React26.createElement("div", { className: "dhl-market-workspace" + (s.tapePlacement === "below" ? " dhl-tape-below" : "") }, /* @__PURE__ */ React26.createElement("section", { className: "dhl-chart-panel" + (chartExpanded ? " dhl-chart-panel-expanded" : ""), "aria-label": tr("\u884C\u60C5\u56FE\u8868", "Market chart") }, /* @__PURE__ */ React26.createElement("div", { className: "dhl-chart-tabs", role: "tablist", "aria-label": tr("\u56FE\u8868\u5185\u5BB9", "Chart content") }, /* @__PURE__ */ React26.createElement("button", { type: "button", role: "tab", "aria-selected": chartTab === "chart", className: chartTab === "chart" ? "on" : "", onClick: () => saveSessionWorkspace({ chartTab: "chart" }) }, tr("K \u7EBF", "Chart")), row?.kind !== "spot" && row?.kind !== "outcome" ? /* @__PURE__ */ React26.createElement("button", { type: "button", role: "tab", "aria-selected": chartTab === "funding", className: chartTab === "funding" ? "on" : "", onClick: () => saveSessionWorkspace({ chartTab: "funding" }) }, tr("\u8D44\u91D1\u8D39\u5386\u53F2", "Funding history")) : null), chartTab === "chart" ? /* @__PURE__ */ React26.createElement("div", { role: "tabpanel" }, /* @__PURE__ */ React26.createElement("div", { className: "dhl-chart-tools" }, /* @__PURE__ */ React26.createElement("div", { className: "dhl-intervals", "aria-label": tr("K \u7EBF\u5468\u671F", "Chart interval") }, INTERVALS.map((iv) => /* @__PURE__ */ React26.createElement("button", { key: iv, type: "button", className: s.interval === iv ? "on" : "", onClick: () => changeInterval(iv) }, iv)), /* @__PURE__ */ React26.createElement(Select, { "aria-label": tr("\u66F4\u591A K \u7EBF\u5468\u671F", "More chart intervals"), value: MORE_INTERVALS.includes(s.interval) ? s.interval : "", onChange: (event) => changeInterval(event.target.value) }, /* @__PURE__ */ React26.createElement("option", { value: "", disabled: true }, tr("\u66F4\u591A", "More")), MORE_INTERVALS.map((iv) => /* @__PURE__ */ React26.createElement("option", { key: iv, value: iv }, iv)))), /* @__PURE__ */ React26.createElement("div", { className: "dhl-chart-actions" }, /* @__PURE__ */ React26.createElement(Select, { "aria-label": tr("\u56FE\u8868\u7C7B\u578B", "Chart type"), value: chartType, onChange: (event) => saveSessionWorkspace({ chartType: event.target.value }) }, [["candles", "\u8721\u70DB\u56FE", "Candles"], ["bars", "\u7F8E\u56FD\u7EBF", "OHLC bars"], ["line", "\u6298\u7EBF\u56FE", "Line"], ["area", "\u9762\u79EF\u56FE", "Area"], ["heikinAshi", "\u5E73\u5747K\u7EBF", "Heikin Ashi"]].map(([value, zh, en]) => /* @__PURE__ */ React26.createElement("option", { key: value, value }, tr(zh, en)))), /* @__PURE__ */ React26.createElement("details", { className: "dhl-layer-menu" }, /* @__PURE__ */ React26.createElement("summary", null, tr("\u663E\u793A", "Show"), /* @__PURE__ */ React26.createElement(UiIcon, { name: "chevronDown", size: 12 })), /* @__PURE__ */ React26.createElement("div", { className: "dhl-layer-popover" }, [["orders", tr("\u59D4\u6258", "Orders")], ["fills", tr("\u6210\u4EA4", "Fills")], ["reasons", tr("\u6210\u4EA4\u539F\u56E0", "Fill reasons")], ["drawings", tr("\u753B\u7EBF", "Drawings")]].map(([id, label]) => /* @__PURE__ */ React26.createElement("label", { key: id }, /* @__PURE__ */ React26.createElement("input", { type: "checkbox", checked: layers[id], onChange: (event) => saveSessionWorkspace({ chartLayers: { ...layers, [id]: event.target.checked } }) }), label)))), /* @__PURE__ */ React26.createElement("details", { className: "dhl-indicator-menu" }, /* @__PURE__ */ React26.createElement("summary", { "aria-label": tr("\u9009\u62E9\u56FE\u8868\u6307\u6807", "Choose chart indicators") }, tr("\u6307\u6807", "Indicators"), " ", /* @__PURE__ */ React26.createElement("span", { className: "dhl-indicator-count" }, indicators.size + maLines.length)), /* @__PURE__ */ React26.createElement("div", { className: "dhl-indicator-popover", role: "group", "aria-label": tr("\u56FE\u8868\u6307\u6807", "Chart indicators") }, /* @__PURE__ */ React26.createElement("strong", null, tr("\u56FE\u8868\u6307\u6807", "Chart indicators")), INDICATOR_CHOICES.map(([id, label, description]) => /* @__PURE__ */ React26.createElement("button", { type: "button", key: id, className: indicators.has(id) ? "on" : "", "aria-pressed": indicators.has(id), onClick: () => toggleIndicator(id) }, /* @__PURE__ */ React26.createElement("span", { className: "dhl-indicator-check", "aria-hidden": "true" }, indicators.has(id) ? /* @__PURE__ */ React26.createElement(UiIcon, { name: "check", size: 13 }) : null), /* @__PURE__ */ React26.createElement("span", null, /* @__PURE__ */ React26.createElement("b", null, id === "rsi14" ? `RSI ${studySettings.rsi.period}` : id === "bollinger20" ? `BOLL ${studySettings.bollinger.period} \xD7 ${studySettings.bollinger.multiplier}` : tr(label, INDICATOR_EN[id]?.[0] ?? label)), /* @__PURE__ */ React26.createElement("small", null, id === "macd" ? `${studySettings.macd.fast} / ${studySettings.macd.slow} / ${studySettings.macd.signal}` : id === "bollinger20" ? tr("\u5747\u7EBF\u4E0E\u6807\u51C6\u5DEE\u901A\u9053", "Mean and standard deviation bands") : tr(description, INDICATOR_EN[id]?.[1] ?? description))))), /* @__PURE__ */ React26.createElement(IndicatorEditor, { key: s.activeSessionId, settings: s.workspace?.indicatorSettings, indicators: [...indicators], maLines, onApply: saveSessionWorkspace }), /* @__PURE__ */ React26.createElement(MaEditor, { lines: maLines, onChange: (next) => saveSessionWorkspace({ maLines: next }) }))), /* @__PURE__ */ React26.createElement("button", { type: "button", className: s.workspace?.showDataWindow ? "on" : "", "aria-pressed": s.workspace?.showDataWindow ?? false, onClick: () => saveSessionWorkspace({ showDataWindow: !s.workspace?.showDataWindow }) }, tr("\u6570\u636E\u7A97\u53E3", "Data window")), /* @__PURE__ */ React26.createElement(StrategyMenu, { candles: s.candles, coin, interval: s.interval }), /* @__PURE__ */ React26.createElement("details", { className: "dhl-draw-menu" + (drawMode ? " active" : ""), ref: drawMenu }, /* @__PURE__ */ React26.createElement("summary", { "aria-label": tr("\u753B\u7EBF\u5DE5\u5177", "Drawing tools") }, drawMode ? /* @__PURE__ */ React26.createElement(React26.Fragment, null, /* @__PURE__ */ React26.createElement(ToolIcon, { kind: drawMode, size: 14 }), tr(toolOf(drawMode).zh, toolOf(drawMode).en)) : tr("\u753B\u7EBF", "Draw"), /* @__PURE__ */ React26.createElement(UiIcon, { name: "chevronDown", size: 12 })), /* @__PURE__ */ React26.createElement("div", { className: "dhl-draw-popover", role: "menu", "aria-label": tr("\u753B\u7EBF\u5DE5\u5177", "Drawing tools") }, /* @__PURE__ */ React26.createElement(
+    "input",
+    {
+      className: "dhl-draw-search",
+      type: "search",
+      value: toolQuery,
+      placeholder: tr(`\u641C\u7D22 ${DRAWING_TOOLS.length} \u79CD\u753B\u7EBF\u5DE5\u5177`, `Search ${DRAWING_TOOLS.length} drawing tools`),
+      "aria-label": tr("\u641C\u7D22\u753B\u7EBF\u5DE5\u5177", "Search drawing tools"),
+      onChange: (event) => setToolQuery(event.target.value),
+      onKeyDown: (event) => {
+        if (event.key === "Escape" && toolQuery) {
+          event.stopPropagation();
+          setToolQuery("");
+        }
+      }
+    }
+  ), (() => {
+    const query = toolQuery.trim().toLowerCase();
+    const shown = query ? DRAWING_TOOLS.filter((tool) => `${tool.zh} ${tool.en} ${tool.kind}`.toLowerCase().includes(query)) : DRAWING_TOOLS;
+    return shown.length ? null : /* @__PURE__ */ React26.createElement("p", { className: "dhl-draw-empty" }, tr("\u6CA1\u6709\u5339\u914D\u7684\u753B\u7EBF\u5DE5\u5177", "No matching tools"));
+  })(), DRAWING_TOOLS.filter((tool) => {
+    const query = toolQuery.trim().toLowerCase();
+    return !query || `${tool.zh} ${tool.en} ${tool.kind}`.toLowerCase().includes(query);
+  }).map((tool, index, shown) => /* @__PURE__ */ React26.createElement(React26.Fragment, { key: tool.kind }, index > 0 && shown[index - 1].group !== tool.group ? /* @__PURE__ */ React26.createElement("hr", null) : null, /* @__PURE__ */ React26.createElement("div", { className: "dhl-draw-tool-row" }, /* @__PURE__ */ React26.createElement(
     "button",
     {
       type: "button",

package/lib/chart-drawings.d.ts

@@ -1,4 +1,4 @@
-export type DrawingKind = 'level' | 'hray' | 'vline' | 'text' | 'trend' | 'ray' | 'extended' | 'fib' | 'rect' | 'measure' | 'channel' | 'long' | 'short' | 'fibext' | 'fibchannel' | 'fibtime' | 'gannfan' | 'pitchfork' | 'regression' | 'vprofile' | 'arrow' | 'callout' | 'circle' | 'triangle' | 'brush' | 'crossline' | 'pricelabel' | 'infoline' | 'trendangle' | 'pricerange' | 'daterange' | 'elliott' | 'elliottabc' | 'xabcd' | 'abcd' | 'headshoulders' | 'gannbox' | 'gannsquare' | 'schiff' | 'modschiff' | 'icon'
+export type DrawingKind = 'level' | 'hray' | 'vline' | 'text' | 'trend' | 'ray' | 'extended' | 'fib' | 'rect' | 'measure' | 'channel' | 'long' | 'short' | 'fibext' | 'fibchannel' | 'fibtime' | 'gannfan' | 'pitchfork' | 'regression' | 'vprofile' | 'arrow' | 'callout' | 'circle' | 'triangle' | 'brush' | 'crossline' | 'pricelabel' | 'infoline' | 'trendangle' | 'pricerange' | 'daterange' | 'elliott' | 'elliottabc' | 'xabcd' | 'abcd' | 'headshoulders' | 'gannbox' | 'gannsquare' | 'schiff' | 'modschiff' | 'icon' | 'flatchannel' | 'disjoint' | 'fibfan' | 'fibcircles' | 'fibarcs' | 'fibwedge' | 'fibtrendtime' | 'cypher' | 'threedrives' | 'tripattern' | 'elliotttri' | 'elliottwxy' | 'elliottwxyxz' | 'cycles' | 'sine' | 'ellipse' | 'rotrect' | 'arc' | 'curve' | 'note' | 'pricenote' | 'signpost' | 'avwap' | 'avprofile' | 'forecast' | 'highlighter' | 'path' | 'polyline' | 'pin' | 'fibspiral' | 'barspattern'
 export type LineStyleName = 'solid' | 'dashed' | 'dotted'
 export interface DrawingStyle { visibleIntervals?: string[]; fontSize?: number; bold?: boolean; italic?: boolean; extendLeft?: boolean; extendRight?: boolean; fillOpacity?: number; levels?: number[]; rows?: number; valueArea?: number; color?: string; lineWidth?: number; lineStyle?: LineStyleName; locked?: boolean; hidden?: boolean; shared?: boolean; alert?: boolean }
 export declare const DRAWING_POINTS: Record<DrawingKind, number>
@@ -29,3 +29,6 @@ export declare const FIB_LEVEL_KINDS: DrawingKind[]
 export declare const INTERVALS: string[]
 export declare const FONT_KINDS: DrawingKind[]
 export declare const FILL_KINDS: DrawingKind[]
+export declare const FREEHAND_KINDS: DrawingKind[]
+export declare const MULTI_KINDS: DrawingKind[]
+export declare const PATH_MAX: number

package/lib/chart-drawings.js

@@ -23,7 +23,21 @@ export const DRAWING_POINTS = {
   // Advanced: Elliott waves, harmonic / chart patterns, Gann box & square, pitchfork variants, icons.
   elliott: 6, elliottabc: 4, xabcd: 5, abcd: 4, headshoulders: 7,
   gannbox: 2, gannsquare: 2, schiff: 3, modschiff: 3, icon: 1,
+  // TradingView's remaining common tools (0.5.0).
+  flatchannel: 3, disjoint: 3,
+  fibfan: 2, fibcircles: 2, fibarcs: 2, fibwedge: 3, fibtrendtime: 3,
+  cypher: 5, threedrives: 6, tripattern: 4, elliotttri: 6, elliottwxy: 4, elliottwxyxz: 6, cycles: 2, sine: 2,
+  ellipse: 2, rotrect: 3, arc: 3, curve: 3,
+  note: 1, pricenote: 2, signpost: 1,
+  avwap: 1, avprofile: 1, forecast: 2,
+  // Freehand highlighter (0 = variable, like brush); path / polyline take clicks until a double-click or Enter.
+  highlighter: 0, path: 0, polyline: 0, pin: 1, fibspiral: 2, barspattern: 3,
 }
+/** Freehand kinds drawn by dragging. */
+export const FREEHAND_KINDS = ['brush', 'highlighter']
+/** Kinds drawn click by click until a double-click or Enter. */
+export const MULTI_KINDS = ['path', 'polyline']
+export const PATH_MAX = 50
 /** Icon stickers (the drawing's label holds the icon name). */
 export const ICON_NAMES = ['flag', 'star', 'up', 'down', 'warning', 'check', 'cross', 'fire', 'target', 'bell', 'pin', 'clock', 'dollar', 'shield', 'bolt', 'heart', 'question', 'info']
 /** Sticker library (TradingView's emoji stickers): category → emoji. An icon label is a name or `emoji:<char>`. */
@@ -55,9 +69,9 @@ export function isSingleEmoji(value) {
 /** Chart intervals a drawing can be limited to (same set as the desk). */
 export const INTERVALS = ['1m', '3m', '5m', '15m', '30m', '1h', '2h', '4h', '8h', '12h', '1d', '3d', '1w', '1M']
 /** Text drawings whose font size can be set. */
-export const FONT_KINDS = ['text', 'callout']
+export const FONT_KINDS = ['text', 'callout', 'note', 'pricenote', 'signpost']
 /** Drawings with a background fill whose opacity can be set. */
-export const FILL_KINDS = ['rect', 'circle', 'triangle', 'channel', 'fib', 'regression', 'gannbox', 'pricerange', 'daterange', 'measure']
+export const FILL_KINDS = ['rect', 'circle', 'triangle', 'channel', 'fib', 'regression', 'gannbox', 'pricerange', 'daterange', 'measure', 'flatchannel', 'disjoint', 'ellipse', 'rotrect']
 /** Fibonacci drawings whose levels can be customised. */
 export const FIB_LEVEL_KINDS = ['fib', 'fibext', 'fibchannel']
 export const PROFILE_ROWS_MIN = 6
@@ -115,7 +129,7 @@ export function linePriceAt(mark, time) {
 export const BRUSH_MIN = 2
 export const BRUSH_MAX = 500
 /** Kinds whose label is free text shown on the chart (up to 200 characters). */
-export const TEXT_KINDS = ['text', 'callout']
+export const TEXT_KINDS = ['text', 'callout', 'note', 'pricenote', 'signpost', 'pin']
 /** Clicks that create a drawing when they differ from its stored anchor count. */
 export const DRAWING_CLICKS = { ...Object.fromEntries(Object.entries(DRAWING_POINTS)), long: 2, short: 2 }
 export const DRAWING_KINDS = Object.keys(DRAWING_POINTS)
@@ -156,11 +170,15 @@ export function drawingGeometry(kind, request, now = Date.now()) {
   }
   const need = DRAWING_POINTS[kind]
   const raw = request?.points
-  if (kind === 'brush') {
-    if (!Array.isArray(raw) || raw.length < BRUSH_MIN || raw.length > BRUSH_MAX) throw new Error(`brush 需要 ${BRUSH_MIN}-${BRUSH_MAX} 个 points`)
+  if (FREEHAND_KINDS.includes(kind)) {
+    if (!Array.isArray(raw) || raw.length < BRUSH_MIN || raw.length > BRUSH_MAX) throw new Error(`${kind} 需要 ${BRUSH_MIN}-${BRUSH_MAX} 个 points`)
+  } else if (MULTI_KINDS.includes(kind)) {
+    if (!Array.isArray(raw) || raw.length < 2 || raw.length > PATH_MAX) throw new Error(`${kind} 需要 2-${PATH_MAX} 个 points`)
   } else if (!Array.isArray(raw) || raw.length !== need) throw new Error(`${kind} 需要 ${need} 个 points（{ time, price }）`)
   const points = raw.map((item, index) => point(item?.time, item?.price, `第 ${index + 1} 个点`))
-  if (['trend', 'ray', 'extended', 'channel', 'fibchannel', 'gannfan', 'regression', 'fibtime', 'infoline', 'trendangle'].includes(kind) && points[0].time === points[1].time) throw new Error('前两个点的时间不能相同')
+  if (['trend', 'ray', 'extended', 'channel', 'fibchannel', 'gannfan', 'regression', 'fibtime', 'infoline', 'trendangle', 'flatchannel', 'disjoint', 'fibfan', 'fibtrendtime', 'cycles', 'sine', 'forecast'].includes(kind) && points[0].time === points[1].time) throw new Error('前两个点的时间不能相同')
+  if ((kind === 'cycles' || kind === 'sine' || kind === 'fibtrendtime') && points[1].time < points[0].time) throw new Error('第二个点必须晚于第一个点')
+  if (kind === 'barspattern' && points[1].time <= points[0].time) throw new Error('K 线形态的源区间终点必须晚于起点')
   if (kind === 'vprofile') {
     if (points[0].time === points[1].time) throw new Error('成交量分布需要一个时间区间')
     // Only the time range matters, so either drawing direction is fine.

package/lib/tools.js

@@ -10,9 +10,11 @@ import { closedCandles, computeIndicators } from './indicators.js'
 import { MA_KINDS, MA_SOURCES, maLabel, maLatest, normalizeMaLine, normalizeMaLines } from './moving-average.js'
 import { INDICATOR_IDS, computeStudies, normalizeIndicatorSettings, studyDefinitions } from './studies.js'
 import { reviewLedger } from './review.js'
-import { DRAWING_KINDS, drawingStyle, volumeProfile } from './chart-drawings.js'
+import { DRAWING_KINDS, DRAWING_POINTS, TEXT_KINDS, drawingStyle, volumeProfile } from './chart-drawings.js'
 
-const DRAWING_NAMES = { vprofile: '固定范围成交量分布', level: '水平线', hray: '水平射线', vline: '垂直线', text: '文本', trend: '趋势线', ray: '射线', extended: '延长线', channel: '平行通道', fib: '斐波那契回撤', rect: '矩形', measure: '价格区间', long: '多头头寸', short: '空头头寸', fibext: '斐波那契扩展', fibchannel: '斐波那契通道', fibtime: '斐波那契时间周期', gannfan: '江恩扇形', pitchfork: '安德鲁叉子线', regression: '回归趋势', arrow: '箭头', callout: '标注气泡', circle: '圆形', triangle: '三角形', brush: '画笔', crossline: '十字线', pricelabel: '价格标签', infoline: '信息线', trendangle: '趋势角度', pricerange: '价格区间', daterange: '日期区间', elliott: '艾略特推动浪', elliottabc: '艾略特调整浪', xabcd: 'XABCD 谐波', abcd: 'ABCD 形态', headshoulders: '头肩形态', gannbox: '江恩箱', gannsquare: '江恩方格', schiff: 'Schiff 叉子线', modschiff: '改良 Schiff 叉子线', icon: '图标' }
+const DRAWING_NAMES = { highlighter: '荧光笔', path: '路径', polyline: '折线', pin: '图钉', fibspiral: '斐波那契螺旋', barspattern: 'K 线形态', flatchannel: '平顶/平底通道', disjoint: '分离通道', fibfan: '斐波那契速度阻力扇', fibcircles: '斐波那契圆', fibarcs: '斐波那契弧', fibwedge: '斐波那契楔形', fibtrendtime: '基于趋势的斐波那契时间',
+  cypher: 'Cypher 形态', threedrives: '三驱形态', tripattern: '三角形态', elliotttri: '艾略特三角浪', elliottwxy: '艾略特双重组合', elliottwxyxz: '艾略特三重组合', cycles: '周期线', sine: '正弦线',
+  ellipse: '椭圆', rotrect: '旋转矩形', arc: '弧线', curve: '曲线', note: '便签', pricenote: '价格便签', signpost: '路标', avwap: '锚定 VWAP', avprofile: '锚定成交量分布', forecast: '预测', vprofile: '固定范围成交量分布', level: '水平线', hray: '水平射线', vline: '垂直线', text: '文本', trend: '趋势线', ray: '射线', extended: '延长线', channel: '平行通道', fib: '斐波那契回撤', rect: '矩形', measure: '价格区间', long: '多头头寸', short: '空头头寸', fibext: '斐波那契扩展', fibchannel: '斐波那契通道', fibtime: '斐波那契时间周期', gannfan: '江恩扇形', pitchfork: '安德鲁叉子线', regression: '回归趋势', arrow: '箭头', callout: '标注气泡', circle: '圆形', triangle: '三角形', brush: '画笔', crossline: '十字线', pricelabel: '价格标签', infoline: '信息线', trendangle: '趋势角度', pricerange: '价格区间', daterange: '日期区间', elliott: '艾略特推动浪', elliottabc: '艾略特调整浪', xabcd: 'XABCD 谐波', abcd: 'ABCD 形态', headshoulders: '头肩形态', gannbox: '江恩箱', gannsquare: '江恩方格', schiff: 'Schiff 叉子线', modschiff: '改良 Schiff 叉子线', icon: '图标' }
 import { canonicalMarketCoin } from './market-symbol.js'
 import { addEntry, journalDigest, removeStrategy, updateProfile, upsertStrategy } from './journal.js'
 import { analyzeTrading, checkupText } from './analysis.js'
@@ -244,7 +246,7 @@ function buildTools(remote) {
           coin: { type: 'string', description: '默认会话绑定币对' },
           interval: { type: 'string', description: '默认当前交易台周期' },
           kind: { type: 'string', enum: [...DRAWING_KINDS, 'ma'], description: 'add 必填：画线类型或 ma 均线' },
-          points: { type: 'array', description: 'hray/vline/ray/extended/channel/fib/rect/measure 的锚点，按点击顺序', items: { type: 'object', properties: { time: { type: 'number', description: 'K 线时间 epoch ms' }, price: { type: 'number' } }, required: ['time', 'price'] } },
+          points: { type: 'array', description: `除 level（price）、trend（fromTime…toPrice）外各类型的锚点，按点击顺序。点数：${Object.entries(DRAWING_POINTS).filter(([kind]) => kind !== 'level' && kind !== 'trend').map(([kind, n]) => `${kind}=${n || (kind === 'path' || kind === 'polyline' ? '2-50' : '2-500')}`).join(' ')}。long/short=[入场,止损,止盈]；${TEXT_KINDS.join('/')} 的文字放 label；avwap/avprofile 的唯一锚点是起算 K 线；barspattern=[源区间起点, 源区间终点, 粘贴位置（首根开盘价对齐此价）]`, items: { type: 'object', properties: { time: { type: 'number', description: 'K 线时间 epoch ms' }, price: { type: 'number' } }, required: ['time', 'price'] } },
           maType: { type: 'string', enum: MA_KINDS, description: 'kind=ma：均线类型；smma 即平滑均线（RMA）' },
           period: { type: 'number', description: 'kind=ma：周期，1-500 的整数' },
           source: { type: 'string', enum: MA_SOURCES, description: 'kind=ma：价格源，默认 close' },

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "dsh-hyperliquid",
-  "version": "0.4.4",
+  "version": "0.5.1",
   "description": "Hyperliquid trading desk for the DeepSeek Harness (dsh) - market workspace, native agent conversation and guarded live / paper trading over the Hyperliquid API.",
   "icon": "./icon.svg",
   "type": "module",

package/skills/hyperliquid-trading/SKILL.md

@@ -58,7 +58,7 @@ description: 作为用户的交易副手，在 DSH 交易会话中用 Hyperliqui
 - 提交后一律用 `hyper_account orderStatus / orders / state` 对账。回执超时或未知时，先查状态再决定，绝不直接重下。
 
 ### 图表与提醒
-- 41 种画线（趋势线、水平线/射线、通道、斐波那契回撤/扩展/通道（可自定义层级 `levels`）、江恩、叉子线、回归趋势、**固定范围成交量分布 vprofile**（返回 POC / VAH / VAL）、艾略特浪与谐波形态、多空头寸、文字和图标等），用 `hyper_chart`。已有画线用 `update` 修改，不必删了重画。
+- 72 种画线（趋势线、水平线/射线、通道、斐波那契回撤/扩展/通道（可自定义层级 `levels`）、江恩、叉子线、回归趋势、**固定范围成交量分布 vprofile**（返回 POC / VAH / VAL）、艾略特浪与谐波形态、多空头寸、文字和图标、**锚定 VWAP avwap**（单点锚定，算到最新 K 线）、**锚定成交量分布 avprofile**、预测、便签 / 路标等；各类型点数见 `hyper_chart` 的 points 说明），用 `hyper_chart`。已有画线用 `update` 修改，不必删了重画。
 - 均线用 `hyper_chart add kind=ma`；RSI、MACD、布林带等副图指标和切换周期用 `hyper_chart action=view`。**不要自己算均线再拼线段**。
 - 价格提醒：level / hray / trend / ray / extended 可设 `alert=true`，价格穿越时交易台弹出提醒，触发一次后自动关闭（HIP-3 市场同样生效）。同时你会收到一条以「[交易台事件]」开头的消息（同一会话 5 分钟内最多一次，多个提醒会合并）。它是自动通知，**不是用户授权**：复核后简短告诉用户发生了什么、建议怎么做，不要据此直接下单、改限额或划转。
 - `shared=true` 让画线同步到该币种的所有会话。