dsh-h3-image 0.2.10 → 0.2.11

package/README.md

@@ -34,10 +34,10 @@
 | 安装期间磁盘 | 峰值约 60 GB |
 | 装完后磁盘 | 约 53 GB（源分片转换完会自动删掉） |
 | 单张图内存（1 MP） | 约 27.5 GB |
-| 每个权重分片（下载 + 转换） | 约 4–5 分钟，看你的网速 |
+| 每个权重分片（下载 + 转换） | 时间跟你的网络环境和机器有关，快慢差别很大；中断可续传 |
 | 第一次出图 | 约 30 秒 |
 
-中断的步骤可以接着来：下到一半断了从 `.part` 继续，下完的分片不会重下。内存那行是引擎自己报的单张图占用。
+中断的步骤可以接着来：下到一半断了从 `.part` 继续，下完的分片不会重下。大文件分 4 段并发下载；服务器不支持分段时自动回单线程，行为不变。内存那行是引擎自己报的单张图占用。
 
 ### 许可——下载权重前必读
 
@@ -101,10 +101,10 @@ Measured on an M5 Ultra with 256 GB of unified memory, from a from-scratch insta
 | Disk during setup | ~60 GB at peak |
 | Disk after setup | ~53 GB (source shards are deleted once converted) |
 | Memory per image (1 MP) | ~27.5 GB |
-| Per weight shard (download + convert) | ~4–5 min, depends on your connection |
+| Per weight shard (download + convert) | Depends on your network and machine; slow and fast setups differ a lot. Interrupted downloads resume. |
 | First image | ~30 s |
 
-Interrupted steps resume: a killed download continues from its `.part`, and finished shards are never re-downloaded. The memory figure is the per-image footprint the engine reports itself.
+Interrupted steps resume: a killed download continues from its `.part`, and finished shards are never re-downloaded. Large files download in 4 parallel segments; if the server doesn't support ranged segments, it falls back to a single connection automatically. The memory figure is the per-image footprint the engine reports itself.
 
 ### Licenses — read before downloading weights
 

package/assets/stage_weights.py

@@ -33,6 +33,7 @@ Progress contract (parsed by lib/jobs.js, all flushed):
     [stage n/N] skipped <name> (already present)
     [stage n/N] switched endpoint: <host>
     [stage n/N] note: <name> redirected to <host>
+    [stage n/N] seg <i>/4 <name> via <host>   (segmented mode only)
     stage: <name>: direct round failed (<err>); retrying direct once
     stage: retrying via system proxy (may count against proxy data)
     STAGE OK            (terminal, stdout)
@@ -42,10 +43,31 @@ Resumability: a `.part` survives a failed attempt and resumes with a Range
 request; a server that ignores Range restarts the file cleanly (200 →
 truncate). A part that fails sha256 is deleted, never renamed into place.
 
+Segmented downloads (files at or above --seg-threshold, default 64 MB): the
+file is split into SEG_COUNT=4 byte ranges fetched concurrently by a
+ThreadPoolExecutor (max_workers=4), each segment streaming into its own
+`<name>.part.<i>` with a `Range: bytes=start-end` request. Every segment
+resumes independently: a segment `.part` of `have` bytes re-requests
+`bytes=(start+have)-`; only a 206 appends, a segment `.part` longer than its
+segment is deleted and re-fetched from zero. Once all segments are in, they
+are stitched into the single `.part` in order (4 MB blocks), the segment
+parts are deleted, and the existing verification path takes over unchanged:
+total size == size and sha256 match → rename into place; anything else → the
+`.part` (and any segment parts) are deleted, never renamed. Disk cost: while
+stitching, the segment parts and the assembled `.part` coexist, so the
+temporary footprint is roughly one extra copy of the file (about 2x its size
+during the stitch, back to ~1x once the segments are unlinked). A server that
+answers a segment with 200 instead of 206 does not honour Range: the whole
+segmented attempt is abandoned, every segment part is deleted, and the file
+falls back to the untouched single-stream path on that same endpoint. One
+segmented attempt counts as one attempt against the endpoint-fallback ladder
+(two direct rounds, then one system-proxy round).
+
 Usage:
     python stage_weights.py --dir MODEL_DIR \
         --engine-script .../scripts/fetch_h3_image.py \
-        --endpoints hf,https://mirror.example
+        --endpoints hf,https://mirror.example \
+        [--seg-threshold BYTES]
 """
 
 from __future__ import annotations
@@ -56,12 +78,21 @@ import sys
 import urllib.error
 import urllib.parse
 import urllib.request
+from concurrent.futures import ThreadPoolExecutor, as_completed
 from pathlib import Path
 
 TIMEOUT = 60  # seconds without data on any single read — same as the engine fetch
 REDIRECT_CODES = (301, 302, 303, 307, 308)
 HF = "https://huggingface.co"
 
+# Files at or above this many bytes are fetched in parallel segments. The
+# default is deliberately high: below it the extra connections and the stitch
+# pass cost more than the wall-clock they save. Overridable with
+# --seg-threshold (the L2 tests use a tiny value to exercise the path).
+SEG_THRESHOLD = 64 * 1024 * 1024
+SEG_COUNT = 4
+STITCH_BLOCK = 1 << 22  # 4 MB — same block size the single-stream path streams with
+
 
 class _NoRedirect(urllib.request.HTTPRedirectHandler):
     """Neutralise urllib's built-in redirect handling (it ignores 308); the
@@ -71,6 +102,43 @@ class _NoRedirect(urllib.request.HTTPRedirectHandler):
         return None
 
 
+class _NoRangeError(RuntimeError):
+    """A segmented request came back 200 instead of 206: this server does not
+    honour Range, so segmentation is off for the file and the single-stream
+    path takes over (never a reason to fail the whole endpoint)."""
+
+
+def seg_part_of(dest: Path, i: int) -> Path:
+    return dest.with_name(dest.name + f".part.{i}")
+
+
+def host_of(url: str) -> str:
+    return urllib.parse.urlsplit(url).hostname or url
+
+
+def clear_segment_parts(dest: Path) -> None:
+    """Drop every segment part. Called after a successful stitch, after a
+    verification failure and on the 200 fallback — never after a plain network
+    failure, because those parts are what the next attempt resumes from."""
+    for i in range(SEG_COUNT):
+        seg_part_of(dest, i).unlink(missing_ok=True)
+
+
+def segment_ranges(size: int, count: int = SEG_COUNT):
+    """Contiguous [start, end) ranges covering [0, size), as even as possible.
+    Empty ranges are dropped; fewer than two ranges means there is nothing to
+    parallelise and the caller should stay on the single-stream path."""
+    base, extra = divmod(size, count)
+    ranges = []
+    start = 0
+    for i in range(count):
+        end = start + base + (1 if i < extra else 0)
+        if end > start:
+            ranges.append((start, end))
+        start = end
+    return ranges
+
+
 def sha256_of(path: Path) -> str:
     h = hashlib.sha256()
     with path.open("rb") as fh:
@@ -145,8 +213,113 @@ def attempt(opener, url: str, dest: Path, part: Path, size: int, sha, name: str,
     print(f"[stage {index}/{total}] placed {name}", flush=True)
 
 
+def attempt_segment(opener, url: str, seg_part: Path, start: int, end: int,
+                    name: str, i: int, index: int, total: int):
+    """One endpoint, one byte range: stream into the segment's own .part
+    (resuming from its current size when the server honours Range). Returns
+    the final segment size. Raises _NoRangeError on a 200 (server ignores
+    Range → the caller falls back to single-stream) and RuntimeError on a
+    short/oversize transfer. A network failure leaves the partial segment part
+    on disk so the next attempt resumes it."""
+    host = urllib.parse.urlsplit(url).hostname or url
+    print(f"[stage {index}/{total}] seg {i}/{SEG_COUNT} {name} via {host}", flush=True)
+    seg_len = end - start
+    have = seg_part.stat().st_size if seg_part.exists() else 0
+    if have > seg_len:
+        # A segment part longer than its range can never be right (torn write
+        # or a stale part from a different layout): restart it from zero.
+        seg_part.unlink()
+        have = 0
+    if have == seg_len:
+        # Already complete from an earlier attempt — no request needed.
+        return have
+    # Closed range: the resume point is start+have, and the end stays pinned
+    # so a server that answers cannot overshoot the segment (an open-ended
+    # resume would pull the rest of the file into this segment).
+    headers = {"Range": f"bytes={start + have}-{end - 1}"}
+    with open_following(opener, url, headers) as resp:
+        if getattr(resp, "status", 200) != 206:
+            raise _NoRangeError(f"segment {i} of {name}: server answered {getattr(resp, 'status', 200)} to a Range request")
+        # 206 → append; the Range started exactly at `have`, so whatever is on
+        # disk stays and the missing tail streams in after it.
+        with seg_part.open("ab") as out:
+            while True:
+                block = resp.read(STITCH_BLOCK)
+                if not block:
+                    break
+                out.write(block)
+    got = seg_part.stat().st_size if seg_part.exists() else 0
+    if got != seg_len:
+        if got > seg_len:
+            seg_part.unlink(missing_ok=True)
+        raise RuntimeError(f"segment {i} of {name}: expected {seg_len} bytes, got {got}")
+    return got
+
+
+def stitch_segments(dest: Path, part: Path, ranges) -> None:
+    """Concatenate the segment parts into the single .part in order (blockwise,
+    so peak disk stays at ~2x the file), then drop the segment parts. The
+    caller's existing size/sha verification then judges the assembled part."""
+    with part.open("wb") as out:
+        for i, (_start, _end) in enumerate(ranges):
+            seg_part = seg_part_of(dest, i)
+            with seg_part.open("rb") as seg:
+                while True:
+                    block = seg.read(STITCH_BLOCK)
+                    if not block:
+                        break
+                    out.write(block)
+    clear_segment_parts(dest)
+
+
+def attempt_segmented(opener, url: str, dest: Path, part: Path, size: int, name: str,
+                      index: int, total: int) -> bool:
+    """One endpoint, one whole-file segmented attempt: 4 ranges fetched
+    concurrently, stitched into the single .part. Returns True when the .part
+    is complete and ready for verification, False when the server does not
+    honour Range (parts cleaned, single-stream takes over). Other failures
+    raise with the segment parts kept for the next attempt's resume."""
+    host = urllib.parse.urlsplit(url).hostname or url
+    print(f"[stage {index}/{total}] fetching {name} via {host}", flush=True)
+    ranges = segment_ranges(size)
+    if len(ranges) < 2:
+        return False
+    # A previous single-stream attempt may have left a partial .part; the
+    # segment parts are the source of truth from here, so it would only be
+    # truncated by the stitch anyway.
+    part.unlink(missing_ok=True)
+    try:
+        with ThreadPoolExecutor(max_workers=SEG_COUNT) as pool:
+            futures = [
+                pool.submit(attempt_segment, opener, url, seg_part_of(dest, i), start, end,
+                            name, i + 1, index, total)
+                for i, (start, end) in enumerate(ranges)
+            ]
+            errors = []
+            for fut in as_completed(futures):
+                try:
+                    fut.result()
+                except Exception as error:  # noqa: BLE001 — collect, decide below
+                    errors.append(error)
+        if errors:
+            # A 200 anywhere is a capability statement, not a transient
+            # failure: it must win over any other segment error so the
+            # single-stream fallback always triggers when Range is unsupported.
+            for error in errors:
+                if isinstance(error, _NoRangeError):
+                    raise error
+            raise errors[0]
+    except _NoRangeError:
+        # Not this server's capability: clean slate, single-stream path from
+        # scratch — that path treats a 200 as a normal full-file download.
+        clear_segment_parts(dest)
+        return False
+    stitch_segments(dest, part, ranges)
+    return True
+
+
 def stage_file(*, name: str, rel: str, dest: Path, size: int, sha, endpoints,
-               middle: str, index: int, total: int) -> bool:
+               middle: str, index: int, total: int, seg_threshold: int = SEG_THRESHOLD) -> bool:
     """Place one pinned file. Returns True on placed/skipped, False after every
     endpoint failed in both the direct and the system-proxy round."""
     dest.parent.mkdir(parents=True, exist_ok=True)
@@ -163,6 +336,33 @@ def stage_file(*, name: str, rel: str, dest: Path, size: int, sha, endpoints,
             return True
         part.unlink()
 
+    def attempt_endpoint(opener, url, first):
+        """One endpoint for this file. Big files try the segmented route
+        first; a server that will not do Range (or a file too small to split)
+        goes through the untouched single-stream attempt()."""
+        if size < seg_threshold:
+            attempt(opener, url, dest, part, size, sha, name, index, total, first=first)
+            return
+        if not first:
+            print(f"[stage {index}/{total}] switched endpoint: {host_of(url)}", flush=True)
+        if attempt_segmented(opener, url, dest, part, size, name, index, total):
+            # Stitched: the same verification the single-stream path applies.
+            got = part.stat().st_size if part.exists() else 0
+            if got != size:
+                part.unlink(missing_ok=True)
+                clear_segment_parts(dest)
+                raise RuntimeError(f"expected {size} bytes, got {got}")
+            if sha is not None and sha256_of(part) != sha:
+                part.unlink(missing_ok=True)
+                clear_segment_parts(dest)
+                raise RuntimeError("sha256 mismatch")
+            part.rename(dest)
+            print(f"[stage {index}/{total}] placed {name}", flush=True)
+            return
+        # 200 fallback: the switch (if any) was already announced above, so
+        # single-stream runs with first=True and just re-announces fetching.
+        attempt(opener, url, dest, part, size, sha, name, index, total, first=True)
+
     url_of = lambda endpoint: f"{endpoint.rstrip('/')}/{middle}/{rel}"  # noqa: E731
     last_error = None
     attempts = 0
@@ -173,7 +373,7 @@ def stage_file(*, name: str, rel: str, dest: Path, size: int, sha, endpoints,
     for round_no in (1, 2):
         for endpoint in endpoints:
             try:
-                attempt(direct, url_of(endpoint), dest, part, size, sha, name, index, total, first=attempts == 0)
+                attempt_endpoint(direct, url_of(endpoint), first=attempts == 0)
                 return True
             except Exception as error:  # noqa: BLE001 — any failure means: next endpoint
                 last_error = error
@@ -184,7 +384,7 @@ def stage_file(*, name: str, rel: str, dest: Path, size: int, sha, endpoints,
     proxied = build_opener(direct=False)
     for endpoint in endpoints:
         try:
-            attempt(proxied, url_of(endpoint), dest, part, size, sha, name, index, total, first=attempts == 0)
+            attempt_endpoint(proxied, url_of(endpoint), first=attempts == 0)
             return True
         except Exception as error:  # noqa: BLE001
             last_error = error
@@ -198,6 +398,8 @@ def main(argv=None) -> int:
     ap.add_argument("--dir", type=Path, required=True, help="model root (the engine fetch's --dir)")
     ap.add_argument("--engine-script", type=Path, required=True, help="absolute path to the engine's fetch_h3_image.py")
     ap.add_argument("--endpoints", required=True, help="comma-separated priority list; 'hf' or https://host[/prefix] per entry")
+    ap.add_argument("--seg-threshold", type=int, default=SEG_THRESHOLD,
+                    help=f"files at or above this many bytes download in {SEG_COUNT} concurrent Range segments (default {SEG_THRESHOLD})")
     args = ap.parse_args(argv)
 
     # The engine script's own directory goes on sys.path so `import
@@ -233,7 +435,8 @@ def main(argv=None) -> int:
     total = len(items)
     for index, (name, rel, dest, size, sha) in enumerate(items, 1):
         ok = stage_file(name=name, rel=rel, dest=dest, size=size, sha=sha,
-                        endpoints=endpoints, middle=middle, index=index, total=total)
+                        endpoints=endpoints, middle=middle, index=index, total=total,
+                        seg_threshold=args.seg_threshold)
         if not ok:
             print(f"STAGE FAIL {rel}", file=sys.stderr, flush=True)
             return 1

package/locale/en.json

@@ -1,6 +1,6 @@
 {
   "meta": {
     "title": "H3 Image (dsh-h3-image)",
-    "description": "Unofficial third-party plugin, not affiliated with MiniMax. On Apple Silicon, fully local text-to-image with the open-source MiniMax H3-Image (MLX engine). A one-time setup wizard downloads a fixed version of the engine and weights to your machine (the MiniMax community license and its region terms are shown before any download; you accept it yourself), then generation runs offline — no keys, no accounts, no network access. Long setup steps are background jobs that survive restarts and resume where they stopped. Requires Apple Silicon with 48 GB+ unified memory (32 GB is not guaranteed) and ~60 GB free disk during setup; Intel Macs and other platforms are declined up front. Current version (0.2.10): read-only environment check, setup wizard, and local generation (the community license must be explicitly accepted by you before the first image)."
+    "description": "Unofficial third-party plugin, not affiliated with MiniMax. On Apple Silicon, fully local text-to-image with the open-source MiniMax H3-Image (MLX engine). A one-time setup wizard downloads a fixed version of the engine and weights to your machine (the MiniMax community license and its region terms are shown before any download; you accept it yourself), then generation runs offline — no keys, no accounts, no network access. Long setup steps are background jobs that survive restarts and resume where they stopped. Requires Apple Silicon with 48 GB+ unified memory (32 GB is not guaranteed) and ~60 GB free disk during setup; Intel Macs and other platforms are declined up front. Current version (0.2.11): read-only environment check, setup wizard, and local generation (the community license must be explicitly accepted by you before the first image)."
   }
 }

package/locale/zh.json

@@ -1,6 +1,6 @@
 {
   "meta": {
     "title": "H3 本地生图 (dsh-h3-image)",
-    "description": "非官方第三方插件，与 MiniMax 无关联。在 Apple Silicon 上用开源 MiniMax H3-Image（MLX 引擎）做完全本地文生图。安装向导一次性把固定版本的引擎与权重下载到本机（下载前展示 MiniMax 社区许可及地域条款，由你本人确认接受）；之后生图全程离线——不用密钥、不用账号、不联网。安装中的长步骤是后台任务，DSH 重启不丢、断点续传。需 Apple Silicon、48GB 及以上统一内存（32GB 不保证）、安装期约 60GB 可用磁盘；Intel Mac 与其他平台在检查阶段即明确拒绝。当前版本（0.2.10）：只读环境体检 + 安装向导 + 本地产图（社区许可需你本人确认接受后才会出图）。"
+    "description": "非官方第三方插件，与 MiniMax 无关联。在 Apple Silicon 上用开源 MiniMax H3-Image（MLX 引擎）做完全本地文生图。安装向导一次性把固定版本的引擎与权重下载到本机（下载前展示 MiniMax 社区许可及地域条款，由你本人确认接受）；之后生图全程离线——不用密钥、不用账号、不联网。安装中的长步骤是后台任务，DSH 重启不丢、断点续传。需 Apple Silicon、48GB 及以上统一内存（32GB 不保证）、安装期约 60GB 可用磁盘；Intel Mac 与其他平台在检查阶段即明确拒绝。当前版本（0.2.11）：只读环境体检 + 安装向导 + 本地产图（社区许可需你本人确认接受后才会出图）。"
   }
 }

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "dsh-h3-image",
-  "version": "0.2.10",
+  "version": "0.2.11",
   "description": "在 Apple Silicon 上用开源 MiniMax H3-Image（MLX 引擎）做完全本地文生图的 DeepSeek Harness 插件：一键安装向导 + 零出网本地生图。Fully local MiniMax H3-Image text-to-image on Apple Silicon MLX — a DeepSeek Harness plugin with a one-time setup wizard and no network access at generation.",
   "type": "module",
   "main": "./lib/index.js",